Yealink VC500, VCR11 v4 Quick Reference Guide PDF

1 of 2
1 of 2

Summary of Content for Yealink VC500, VCR11 v4 Quick Reference Guide PDF

VCR11 Remote Control Quick Reference Guide

No.

Off

Description

1

Item

2

3

Starts or stops recording video and audio.

Adjusts layout during a video call.

4

Power Key

Video Recording Key

Layout Key

Custom Key

Puts the system to sleep or wakes the system.

Powers the system on and off.

Parts of the Remote Control

7

Increases the camera zoom.

Increases the captured image magnifications.

Behaves as page up in a multiple page list.

8

Decreases the camera zoom.

Decreases the captured image magnifications. Behaves as page down in a multiple page list.

Confirms actions or answers incoming calls.9

Zoom in Key

Zoom out Key

OK Key

Navigation Key

Navigate through menu items using the Up, Down, Left, and Right keys..

Pan and tilt the camera to adjust the viewing angle.

5 Increases the system volume.

6 Decreases the system volume.

Vol+

Vol-

10

Waking the System 1. To wake the system, press any key on the remote control.

Placing a Call Entering the Calling Information

1. Select Dial menu or press to enter the pre-dialing screen.

Assigns predefined functions to this key. Input key: press to select the video input source.

ScreenShot key: press to capture screen.

Mute Speaker key: press to mute or unmute the speaker. Presentation key: press to start or stop presentation.

No. DescriptionItem

11

Home Key Returns to the idle screen when in the menu.

Enters the Talk Menu during a call. 12

Mute Key Toggles the mute feature.

15

Ends a call or exits from a conference call.

Returns to the idle screen. 16

Generates special characters: .*@.

On-hook Key

Keypad

Character Key

# Key Generates a pound key (#).

Enters digits.

Enters the pre-dialing screen.

Delete Key

14

Deletes one character at a time.

Long press to delete all characters in the input field.

Long press it for 2 seconds to start capturing packets and long press it for 2 seconds again to stop capturing packets.

Off-hook Key

13 Back Key Returns to the previous menu.

Enters the pre-dialing screen.

Places a call.

Answers a call.

17

18

19

2. Select the desired account type from the pull-down list of

3. Enter the calling information in the input box.

You can also select the desired record from the recent call

4. Press to select (video call) or (voice call).

5. Press .

Calling a Contact

1. Select Dial menu or press to enter the pre-dialing

screen.

2. Press to return to the menu.

3. Press or to select Directory.

4. Press to enter submenu.

5. Select the desired contact.

6. Press to enter submenu, select Video Call or Voice Call.

7. Press .

Calling a Call Record

1. Select Dial menu or press to enter the pre-dialing

screen.

2. Press to return to the menu.

3. Press or to select History.

4. Press to enter submenu.

The display device shows recent call records.

5. Select the desired list from the pull-down list of All Calls.

6. Press or to select the desired call record.

7. Press to enter submenu, select Video Call or Voice Call.

8. Press .

Initiating a Conference Do one of the following:

Select Dial menu or press to enter the pre-dialing

screen.

Press to return to the menu.

Call Type before calling.

history.

Press or to select Group Dial.

Press to enter submenu.

Check multiple contacts checkboxes.

Press to enter submenu.

Select Start conference call.

Press .

Use your preferred dialing method, call the first site.

Press or to enter Talk Menu.

Press or to select New Call, and then press .

You can do one of the following:

- If you select Dial, enter information and then dial out.

- If you select Directory, select the desired contact to dial out.

- If you select Group Dial, check multiple ontacts checkboxes.

Press to enter submenu.

Select Start conference call.

- If you select History, select the desired call record to dial out.

The site is added to the conference after answering.

Answering a Call 1. Press on the remote control.

Ending a Call 1. Press on the remote control.

Call Mute and Unmute During a Call Press on the remote control to mute the microphone, others

cannot hear you.

If the call is muted, press on the remote control to unmute the

Video Recording Before recording video, make sure a USB flash drive is connected to video

conferencing system, VCH50 video conferencing hub or CP960 conference

phone and the USB feature is enabled.

To record video when the system is idle or during a call:

1. Press to start recording and then press again to stop

recording.

call.

power the system off.

zoom out.

Joining a Scheduled Conference When you register a YMS account or Yealink Cloud account, you can do one

of the following to join a scheduled conference.

On a conference reminder, select Join.

Select Schedule menu, and then select Join from thedesired conference.

Select Dial menu, and then enter the corresponding conference

information to dial out.

Adjusting the Volume 1. Press or on the remote control.

Adjusting the Video Layout in a Call 1. Press on the remote control in a call.

2. Select the desired layout, and then press .

Adjusting a Camera From the idle screen, enter the near-site video image and press ,

, or to pan or tilt the camera. Press to zoom in or

In a call, press , , or to pan and tilt the camera. Press

to zoom in or zoom out.

Powering the System On and Off Press on the remote control to power on the system.

Press on the remote control, and then select Shut down

Manualsnet FAQs

If you want to find out how the VC500 Yealink works, you can view and download the Yealink VC500, VCR11 v4 Quick Reference Guide on the Manualsnet website.

Yes, we have the Quick Reference Guide for Yealink VC500 as well as other Yealink manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Reference Guide should include all the details that are needed to use a Yealink VC500. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yealink VC500, VCR11 v4 Quick Reference Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yealink VC500, VCR11 v4 Quick Reference Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yealink VC500, VCR11 v4 Quick Reference Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yealink VC500, VCR11 v4 Quick Reference Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Yealink VC500, VCR11 v4 Quick Reference Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.