Yealink UVC30 v12 Quick Start Guide PDF

1 of 8
1 of 8

Summary of Content for Yealink UVC30 v12 Quick Start Guide PDF

UVC30 Content Camera

Quick Start Guide (V1.0)

www.yealink.com

English |

Package Contents

Quick Start Guide

1

UVC30 Room

3m

3M VelcroCable lock box

L-shaped Black Tape4

Mounting Bracket and Accessories Screwdriver

5m EXT USB Cable

Cable Lock Box

Content Camera Installation

Adjust the bracket to the longest.

1

2

2

1. Assemble the bracket

1/4-20 UNC screw

2. Assemble the metal telescopic rod

The length of the metal telescopic rod depends on the width of the whiteboard when you mount the content camera on a wall:

The width of the whiteboard

183cm6ft 213cm7ft

244cm8ft 274cm9ft

64cm2.10ft 75cm2.45ft

86cm2.80ft 96cm3.15ft

Select the scale of the metal telescopic rod

When the whole wall is a whiteboard, you can use the L-shaped tapes to mark the four corners of the whiteboard, so that the camera adapts according to the limited range.

2

3. Assemble the content camera

6

(Recommended) Mount on a wall

3 4 5

90

41mm

Whiteboard

2

4

Adjust the camera angle.

3

Hole depth: 30mm Hole diameter: 6mm

Whiteboard

Whiteboard

Whiteboard

The camera can be routed down or towards the ceiling.

3

Suspend on the ceiling

The height of the camera installation must meet local building rules. If the USB cable that comes

with the camera is not long enough, please choose the desired extension cable solution.

You can use the camera preview in the Microsoft Teams Rooms app to determine the nal placement

of the camera. For more information on how to use the content camera with Microsoft Teams Room,

please refer to https://docs.microsoft.com/en-us/MicrosoftTeams/rooms/content-camera.

Adjust the camera angle.

LED Indicator Instructions

LED indicators on the UVC30 Room:

LED Status Description

Off

The UVC30 Room is not properly connected to the mini-PC or the

UVC30 Room is inactive.

Solid green

Flashing orange The UVC30 Room is upgrading firmware.

The UVC30 Room is in recovery mode and the firmware has not

been upgraded.

The UVC30 Room is active.

Flashing red

Using Your Conent Camera

For more information on how to use your content camera, please refer to Yealink RoomConnect User Guide.

4

UVC30 Room

3m

L4 USB

5m USB

1.

2.

USB 3M

1/4-20 UNC screw

183cm6ft 213cm7ft

244cm8ft 274cm9ft

64cm2.10ft 75cm2.45ft

86cm2.80ft 96cm3.15ft

L

3. Camera

6

3 4 5

6mm 30mm

90

2

4

3

41mm

5

USB Teams Rooms app Teams Room https://docs.microsoft.com/zh-cn/MicrosoftTeams/rooms/content-camera

6

UVC30 Room

UVC30 Room mini-PC

UVC30 Room

UVC30 Room

UVC30 Room

Yealink RoomConnect

Regulatory Notices

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. Web: www.yealink.com Copyright2020YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.All rights reserved.

About Yealink

Technical Support Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.

Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding technical patents of cloud computing , audio, video and image processing technology, Yealink has built up a panoramic collaboration solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments.

Operating Ambient Temperatures Operating temperature: +32 to 104F (0 to 40C) Relative humidity: 5% to 90%, noncondensing Storage temperature: -22 to +160F (-30 to +70C)

Warranty Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.

Explanation of the symbols DC symbol is the DC voltage symbol.

WEEE Warning symbol To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Restriction of Hazardous Substances Directive (RoHS) This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com.

Safety Instructions Save these instructions. Read these safety instructions before use! General Requirements Before you install and use the device, read the safety instructions carefully and observe the situation during operation. During the process of storage, transportation, and operation, please always keep the device dry and clean, avoid collision and crash. Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair. Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected as well.

Environmental Requirements Place the device at a well-ventilated place. Do not expose the device under direct sunlight. Keep the device dry and free of dusts. Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials. Keep the device away from any heat source or bare fire, such as a candle or an electric heater.

Operating Requirements Do not let a child operate the device without guidance. Do not let a child play with the device or any accessory in case of accidental swallowing. Please use the accessories provided or authorized by the manufacturer only. The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only. Before plugging or unplugging any cable, make sure that your hands are completely dry. Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool. During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.

If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug. When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for repair. Do not insert any object into equipment slots that is not part of the product or auxiliary product. Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.

Cleaning Requirements Before cleaning the device, disconnect it from the power supply. Use a piece of soft, dry and anti-static cloth to clean the device. Keep the power plug clean and dry.

Troubleshooting The unit cannot supply power to device other than Yealink device. There is a bad connection with the plug. 1. Clean the plug with a dry cloth. 2. Connect it to another wall outlet. The usage environment is out of operating temperature range. 1. Use in the operating temperature range. The cable between the unit and the Yealink device is connected incorrectly. 1. Connect the cable correctly. You cannot connect the cable properly. 1. You may have connected a wrong Yealink device. 2. Use the correct power supply. Some dust, etc., may be in the port. 1. Clean the port. Contact your dealer or authorized service facility for any further questions.

FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B) Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage; (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.NMB-3(B)

Contact Information YEALINK NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. C YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Made in China

430104001329

Manualsnet FAQs

If you want to find out how the UVC30 Yealink works, you can view and download the Yealink UVC30 v12 Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Yealink UVC30 as well as other Yealink manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Yealink UVC30. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yealink UVC30 v12 Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yealink UVC30 v12 Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yealink UVC30 v12 Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yealink UVC30 v12 Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Yealink UVC30 v12 Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.