Contents

Yamaha DVX-C300 Theater System Owner's Manual PDF

1 of 53
1 of 53

Summary of Content for Yamaha DVX-C300 Theater System Owner's Manual PDF

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VSTRA FRLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in China 3139 246 14711

DVD HOME THEATER SOUND SYSTEM SYSTEME HOME CINEMA DVD

OWNERS MANUAL MODE DEMPLOI

UCA

DVX-C300 (DVR-C300+NX-SW300+NX-F300+NX-C300 +NX-S300)

DVX-C300SW (DVR-C300+NX-SW300)

2005 All rights reserved. This product mainly uses lead-free solder. Cet appareil utilise principalement de la soudure sans plomb.

00_cv1-4_DVX-C300.p65 12/8/04, 10:55 AM1

IMPORTANT SAFETY INSTRUCTIONS

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for a long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15 Be sure to allow spaces of at least 10 cm above, behind and on both sides of DVR-C300, and at least 1m above, 30cm behind and on both sides of NX-SW300.

16 Do not place the following objects on this unit: A vessel with water in it. If the vessel falls by vibrations and water spills, it may cause damage to the unit, and/or you may get an electric shock. Apparatus shall not be exposed to dripping or splashing.

i

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the product OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe Ave. Buena Park, CA90622. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

PRODUIT LASER DE CLASSE 1

CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID EXPOSURE TO BEAM

ADVARSEL SYNLIG OG USYNLIG LASERSTRLING VED BNING

UNDG UDSTTELSE FOR STRLING

ADVARSEL SYNLIG OG USYNLIG LASERSTRLING NR DEKSEL

PNES UNNG EKSPONERING FOR STRLEN

VARNING SYNLIG OCH OSYNLIG LASERSTRLNING NR

DENNA DEL R PPNAD BETRAKTA EJ STRLEN

VARO ! AVATTAESSA OLET ALTTIINA NKYVLLE JA

NKYMTTMLLE LASER STEILYLLE, L KATSO STEESEEN

VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG

WENN ABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETSEN

DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN AVOID DIRECT EXPOSURE TO BEAM

ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D'OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU

CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT PRODUIT LASER DE CLASSE 1

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

ii

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Associations Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow at least 10 cm of free space all around DVR-C300 and at least 1 m above, 30 cm behind and on both sides of NX- SW300 for adequate ventilation.

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, nor locate this unit in an environment with high humidity (i.e., a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign objects may fall onto this unit or where this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: Other components, as they may cause damage and/or

discoloration on the surface of this unit. Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury. Containers with liquid in them, as they may fall, spilling

the liquid and causing an electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use excessive force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.

13 To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reason.

15 When not planning to use this unit for long periods of time (i.e., vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the Troubleshooting section on common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set the unit in standby mode, then disconnect the AC power plug from the wall outlet.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

When playing DTS encoded CDs, excessive noise will be heard from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the player are connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5.1-channel DTS Digital Surround decoder system must be connected to the digital output of the player.

LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.

DANGER This unit emits visible laser radiation when open. Avoid direct eye exposure to beam. When this unit is plugged into a wall outlet, do not place your eyes close to the opening of the disc tray and other openings or look inside.

Be sure to place this unit on a level surface. If you do not do so, this units PLAYXCHANGE operation will not function correctly, and may damage the disc(s) and/or this unit itself.

LASER Type Semiconductor laser GaAlAs Wave length 650 nm (DVD)

784 nm (VCD/CD) Output Power 7 mW (DVD/VCD/CD) Beam divergence 60 degrees

iii

1

E n

g lish

Features

Acive Servo Processing Subwoofer System with a built-in power amplifier. This subwoofer system (NX-SW300) employs Advanced Yamaha Active Servo Technology which YAMAHA has developed for reproducing higher quality super-bass sound. This super-bass sound adds a more realistic, theater-in-the-home effect to your stereo system.

Patent Information Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.

DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

PLAYXCHANGE Capable of changing discs without interrupting currect disc playback. Pressing PLAYXCHANGE on the front panel to open the disc tray and reload or unload discs during playback.

Playable disc formats This receiver can play the disc types associated with the logos shown below. (Do not attempt to load any other type of disc into the receiver, or the receiver may be damaged.)

DIGITAL VIDEO

SUPER VIDEO

2

Features ................................................................... 1

Contents ................................................................. 2

Introduction ........................................................ 4

General Information About the main unit ................................................ 5 Supplied accessories ................................................ 5

Functional Overview Remote control .......................................................... 6 Front panel (DVR-C300) ........................................ 8 Rear panel (DVR-C300) .......................................... 9

Connections Placing the speakers .............................................. 10

Placing the center speaker .................................... 10 Hanging on a wall .................................................... 10 Attaching to a wall .................................................. 10

Connecting the DVD recceiver and speakers to the subwoofer .................................. 11 Connecting a TV ...................................................... 13

Using S-video output .............................................. 13 Using the composite video output ..................... 13

Connecting a progressive scanTV ................... 14 Using component video output (Y PB PR) .................................................................. 14

Placing the speakers and subwoofer .............. 14 Connecting FM/AM antennas ............................. 15 Connecting the power cord ............................... 15 Connecting external AV components ........... 16

Connecting a VCR or Cassette Deck ......................................................... 16 Viewing and listening toplayback ........................ 16 Using the VCR for recording DVD playback ..... 16 Connecting digital audio components ................ 17 Listening to playback .............................................. 17

Getting Started Inserting batteries into the remote control ......................................................... 18 Using the remote control ................................... 18 Setting the TV ........................................................... 19

Selecting the color system that matches your TV ...................................................................... 19 Setting the TV display ............................................. 19

Setting language preferences ............................ 20 On-Screen Display (OSD) language .................... 20 Audio, Subtitle and Disc menu languages .......... 20

Setting speaker channels ..................................... 21

Disc Operations Playing discs ............................................................... 22

Auto Eco Power standby mode ........................... 22 Basic playback controls ........................................22 Selecting various repeat/shuffle functions ...................................................................... 22

Repeat play mode ................................................... 22 Repeating a section within a chapter/ track ...... 23

Shuffle (except DVD/DVD-Audio/VCD/ SVCD/DivX) .............................................................. 23 Other operations for video playback (DVD/VCD/SVCD) ................................................ 24

Using the disc menu ...............................................24 Displaying disc information and the current status ........................................................... 24 Zooming in ............................................................... 24 Resuming playback from the last stopped point ........................................................... 25 Advancing by frame ................................................ 25 Changing sound track language ............................ 25 Changing subtitle language (DVD only) ............. 25 Viewing from another angle (DVD only) ........... 25 Selecting a title (DVD only) .................................. 25 Playback Control (PBC) (VCD only) .................. 25 Preview Function ..................................................... 26

Playing MP3/JPEG/DivX discs ..........................27 Playing MP3 music and a JPEG picture simultaneously .......................................................... 27

Playing Super Audio CDs (SA-CDs) ............... 27 Special features for picture disc playback ....................................................................... 28

Preview Function ..................................................... 28 Zooming pictures .................................................... 28 Multi-angle playback ................................................ 28 Scan Effect ................................................................. 28

DVD Setup Menu Options General Setup Menu .............................................. 29

Selecting DVD-Audio/Video mode .....................29 Locking/Unlocking disc for viewing .................... 29 Programming disc tracks (except for Picture CD/MP3/SA-CD discs) ........................... 29 OSD language .......................................................... 30 Screen Saver (on/off) ......................................... 30 DivX VOD registration code .............................. 30

Audio Setup Menu .................................................. 31 Speaker Setup .......................................................... 31 CD upsampling ........................................................ 31 Night Lighting Mode (on/off) ........................... 31

Contents

3

E n

g lish

Contents

Video Setup Menu .................................................. 31 TV Type ...................................................................... 31 TV Display ................................................................ 31 Progressive function (on/off) ............................. 32 Pictures settings ...................................................... 32 Selecting the black level (U.S.A. model only) .... 32 Closed Caption (U.S.A. model only) ................... 33

Preference Setup Menu ....................................... 33 Audio, subtitle and disc menus ............................. 33 Restricting playback with Parental Control ...... 33 PBC ............................................................................ 34 MP3/ JPEG Menu (on/off) ................................... 34 Changing the password .......................................... 34 Restoring to original settings ............................... 34

Tuner Operations Tuning radio stations ............................................. 35 Presetting radio stations ..................................... 35

Using Plug and Play ................................................. 35 Automatic presetting ............................................. 35 Manual presetting .................................................... 35

Selecting a preset radio station ....................... 36 Deleting a preset radio station ............................ 36

Setting frequency step (Australia model only) .......................................... 36

Sound Controls Selecting surround sound .................................... 37 Selecting digital sound effects ........................... 37 Adjusting the treble/bass level .......................... 37

Volume Control and Other Functions Adjusting the volume level ................................. 38 Switching to active mode .................................... 38 Switching to eco power standby mode ........ 38 Setting remote control codes ........................... 38

Other Functions Controlling other components ......................... 39

TV operations .......................................................... 39 Cable and satelite tuner operations ................... 39

Dimming the display screen .............................. 40 Setting the sleep timer ........................................ 40 Recording on an external AV component ......................................................... 40

Troubleshooting ........................................... 41

Glossary ................................................................. 44

Specifications ................................................... 45

4

Introduction

Thank you for purchasing this unit. This Owners Manual explains the basic operation of this unit.

Region Codes The unit is designed to support the Region Management System. Check the regional code number on the disc package. If the number does not match the units region number (see table below, or see back of unit), the unit may be unable to play the disc.

Notes About Discs This receiver is designed for use with

the following discs: Super Audio CD (SA-CD), DVD-Video, Video CD, Super Video CD, Audio CD, CD-R, CD-RW, DVD-Audio, DVD+RW, DVD+R, DVD-R and DVD-RW.

This receiver can play: MP3 and picture (Kodak, JPEG) files recorded on

CD-R(W). JPEG/ISO 9660 format Maximum 30 character display

DivX disc on CD-R[W]/DVD+R[W]/ DVD-R[W](3.11, 4.x and 5.x)

CD-R and CD-RW cannot be played unless finalized.

Some discs cannot be played depending on the recording conditions, such as the PC environment and application software. The characteristics and application software. The characteristics and condition of some discs; materials, scratches, curvature, etc, may result in playback failure.

Be sure to use only CD-R and CD-RW discs made by reliable manufacturers.

Do not use any non-standard shaped discs (heart-shaped, etc.).

Do not use discs with tape, seals, or paste on their surface. Doing so may damage this receiver.

Do not use discs affixed with labels printed by a commercially available label printer.

Cleaning Discs When a disc becomes dirty, clean it with a

cleaning cloth. Wipe the disc from the center out. Do not wipe in a circlar motion.

Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.

Avoid high temperatures, moisture, water and dust Do not expose the system, batteries or discs to

humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid getting dust on the lens.

Avoid condensation problem The lens may cloud over when the receiver is

suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the receiver in the warm environment until the moisture evaporates.

Disc care Write only on the printed side of a CD-R/

CD-RW and only with a soft felt-tipped pen. Handle the disc by its edge; do not touch the

surface.

Cabinet care Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solution containing alcohol, spirits, ammonia, or abrasives.

Choosing a suitable location Place the receiver on a flat, hard, and stable

surface.

Region number of

the unit

Playable discs

1 ALL

4

1

4ALL

Model

U. S. A. and Canada models

Australia model

5

E n

g lish

General Information

About the main unit

DVD Receiver (DVR-C300)

Subwoofer (NX-SW300)

Front Speakers (NX-F300) (DVX-C300 only)

Center Speaker (NX-C300) (DVX-C300 only)

Surround Speakers (NX-S300) (DVX-C300 only)

PLAYXCHANGE

INPUT VOLUME

AUDIO/VIDEO

NATURAL SOUND HOME THEATER SYSTEM

1 2 3 4 5

DISC

DVR-C300

Supplied accessories

FM Wire Antenna

AM Loop Antenna

Remote Control and Batteries

Video Pin Cable

System Control Cable

Speaker Cables (12m x2, 5m x3) (DVX-C300 only)

Fasteners (2 Sets) (DVX-C300 only)

(x2)

(x2)

(12m x2)

(5m x3)

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV INPUT MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV

(2 Sets)

(x2)

6

Functional Overview

Remote control

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV INPUT MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV1 o p

a s

d f

g

h

j k

l

; z

x

c v

b

2

3

4 5

6

7

8

9

0 q

w e

r t

y u

i

* = Press and hold the button for more than two seconds.

1POWER (TV) Turns the TV on, or sets it to the standby mode.

2DIMMER Selects different levels of brightness for the display

panel.

3Numeric keypad (0-9) Enters a track/title number of the disc. Enters a number of a preset radio station.

4 REPEAT Selects various repeat modes.

5 PROG DVD/CD: starts programming. TUNER: starts *automatic/manual preset

programming.

6TOP MENU/RETURN Returns to the previous menu. Displays the top-level disc menu

(if available).

7Cursor (2 / 3 / 5 / ) Selects movement direction in the menu. TUNER: press left or right to tune the radio

frequency. TUNER: press up or down to select auto tuning.

8 ENTER (OK) Confirms a selection.

9MENU Enters or exits the disc contents menu. For VCD version 2.0 only;

In stop mode, turns on/off playback control (PBC) mode. During playback, returns to the main menu.

07

Exits an operation. DVD/CD: stops playback. DVD/CD: holding down the button will open and

close the disc tray. TUNER: erases a preset radio station.*

qd PRESET u (4 / ) DVD/CD: searches backward/forward* or moves

to the start of a disc track. TUNER: press to select a preset radio station.

7

E n

g lish

Functional Overview

w SUBTITLE Selects a subtitle language.

eAUDIO Selects an audio language (DVD) or an audio

channel (VCD).

rTV VOL (+ / ) Adjusts the TV volume.

tTV CH (+ / ) Switches the TV channel.

yTV INPUT Switches the TV input.

u EFFECT Selects a sound effect.

i Input selection buttons Selects the appropriate active source mode. TV: switches to TV input. AUX: switches to AUX ANALOG/AUX DIGITAL

input. TUNER: switches tuner (FM/AM) input. DVD/CD: switches to DVD/CD mode.

oPOWER (B/I) Turns the DVD receiver on, or set it to the standby

mode.

p SLEEP Sets the sleep timer.

a SCAN Plays the first 6 seconds or less of each track/

chapter on the disc.

sPAGE Turns the pages of DVD-Audio still pictures.

dA-B Repeats a specific section on a disc.

f SHUFFLE Plays tracks in random order.

gON SCREEN Displays the current status or disc information.

h SET UP Enters or exits the system setup menu.

j3

DVD/CD: starts playback.

k8

DVD/CD: pauses playback.

lDISC SKIP Selects another disc.

;ZOOM Enlarges or reduces the TV screen picture.

zANGLE Selects a DVD disc camera angle

(if available).

xVOL (+ / ) Adjusts the volume level.

cTRE/BASS Selects the TREBLE (high tone) or BASS (low tone)

sound mode. Use the VOLUME control to change the tone level.

vMUTE Mutes or restores the volume.

b SURR Selects multi-channel surround or stereo mode.

8

Functional Overview

* = Press and hold the button for more than two seconds.

1 STANDBY/ON Turns the DVD receiver on, or set it to the standby

mode.

2Disc tray Load up to 5 discs in the disc tray.

3VOLUME Adjusts the volume level.

4 INPUT Selects an input source or sets the priority level for

the audio input signals.

50

Opens/closes the disc tray.

6PLAYXCHANGE Use to change discs not being played during

playback.

77

Exits an operation. DVD/CD: stops playback. TUNER: erases a preset radio station.*

83 / 8 DVD/CD: starts/pauses playback. TUNER: starts preset radio station installation in

Plug & Play mode.

94 / , 1 / DVD/CD: searches backward/forward* or moves

to the start of a disc track TUNER: tunes the radio preset up/down.

0 Head phone jack Connects headphones.

q Remote control sensor Point the remote control towards this sensor.

w System display panel

eDISC (1, 2, 3, 4, 5)/LEDs Use to select and directly playback the preferred

disc. Each LED flashes green when the button is

selected.

Front panel (DVR-C300)

PLAYXCHANGE

INPUT VOLUME

AUDIO/VIDEO

NATURAL SOUND HOME THEATER SYSTEM

1 2 3 4 5

DISC

DVR-C300

1

e w q 0 9 8 7 6

2 3 4 5

9

E n

g lish

Functional Overview

1 FM ANT terminal Connect the FM antenna.

2GND and AM ANT terminals Connect the AM loop antenna.

3COMPONENT VIDEO OUT Connect the the Y PB/CB PR/CR jacks on your TV.

4 S VIDEO output Connect to the S-video jack on your TV/VCR.

5VIDEO output Connect to the video (composite) jack on your TV.

6DIGITAL IN Connect to the DIGITAL OUT jack on your digital

audio component.

7AC power cord Connect to a standard AC outlet.

8TO NX-SW300 terminal Connect the subwoofer.

9 LINE OUT Connect to the AUDIO IN jacks on your VCR.

0AUX IN Connect to the AUDIO OUT jacks on your VCR

or cassette deck.

qTV IN Connect to the corresponding AUDIO OUT jacks

on your TV.

75 UNBAL

FM ANT

SYSTEM CONNECTOR

PCM/DTS q DIGITAL

GND

AM ANT

VIDEO OUT (DVD ONLY) S VIDEO

VIDEO

TV IN AUX IN LINE OUT

COMPONENT

TO NX-SW300

DIGITAL IN

COAXIAL

1

0

3 4 6

52

q 9

8

7

Rear panel (DVR-C300)

10

Placing the speakers

Connections

Placing the center speaker When placing the center speaker on top of the TV, use the supplied fasteners to secure the speaker.

1 Peel off the seals on one side of the fasteners and attach them to the bottom of the center speaker.

2 Peel off the seals on the other side of the fasteners and attach them to the top of the TV.

Notes: Do not place the speaker on the TV if the top of the

TV is not level or if it is narrower than the bottom surface of the speaker. Doing so may cause the speaker to fall. In this case, place the speaker inside a TV rack or on a level floor.

Before attaching the fasteners to the TV, clean the surface with a dry cloth. A dirty or wet surface may weaken the adhesive force and cause the speaker to fall.

Do not touch the bonding surfaces of the fasteners after peeling off the seals. Doing so may weaken the adhensive force and cause the speaker to fall.

Attaching to a wall You can attach the speakers (front and surround only) to a wall using commercially available screws (Diameter: 3.5 to 4 mm (1/8 to 5/32), Length: 20 mm (25/32) or more). One speaker requires two screws. To attach all speakers to a wall, you need to prepare eight screws.

1 Install two screws in the wall where you want to place the speaker.

2Hang the speaker on the screws using the holes in the back of the speaker.

Note: After attaching each speaker, check that the speaker

is fixed securely. YAMAHA will bear no responsibility for any accidents caused by improper installations.

Fastener

Peel off the seal

79mm (2-3/4)

10mm (13/32)

20mm (25/32) or more

79mm (2-3/4)

Screws (3.5 to 4mm (1/8 to 5/32 dia., commercially available)

+

Hanging on a wall You can hang the speakers (front and surround only) on a wall using a commercially available bracket and screws (Diameter: 6 mm). Attach a bracket firmly to the rear of the speakers using screws. Then mount a screw on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screw.

Note: Do not use screw threads measured in inches for this

installation. Use metric screw threads only.

This section provides information on installation and connection methods for DVX-C300 speakers. For DVX-C300SW, refer to the manual provided with your speakers.

11

E n

g lish

Connections

Connecting the DVD receiver and speakers to the subwoofer

++ +++

FRONTCENTERSURROUND

1

2

3

Front Speaker (Right)

Front Speaker (Left)

Center Speaker

Surround Speaker (Right)

Surround Speaker (Left)

Subwoofer

DVD Receiver

12

1Connect the speaker cable with the white line to the + connector on the front/center/surround speaker and with the black band to the - connector.

Notes: Ensure that the speaker cables are correctly

connected. Improper connections may damage the system due to a short-circuit.

When connecting the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets caught on a loose speaker cable, the speaker may fall.

To prevent unwanted noise, do not place the subwoofer too close to the DVD receiver, AC power adaptor, TV or other sources of radiation.

2Connect the speaker cable with the white line to the + connector of each terminal on the subwoofer and with the black band to the - connector.

3Connect the subwoofer to the DVD receiver using the system control cable from the subwoofer to the TO NX-SW300 terminal at the rear of the DVD receiver.

Connections

+Press the lever down, then insert the cable into the hole and release the lever.

White line

Black band

TO NX-SW300

SYSTEM CONNECTOR

FRONT CENTER SURROUND

SPEAKERS

Lift up the lever, then insert the cable into the hole and replace the lever.

White line

Lever

Black band

Lever

13

E n

g lish

Connections

IMPORTANT! You only need to make one video

connection from the following options, depending on the capabilities of your TV.

Connect the DVD receiver directly to the TV.

Note: To hear the TV channels through this DVD receiver,

use the audio cables (white/red - not supplied) to connect TV IN jacksto the corresponding AUDIO OUT jacks on the TV.

Connecting a TV

Using S-video output S-(separate)video connections achieve a clearer

picture than composite video connections. Use an S-video cable (not supplied) to connect the DVD receivers S VIDEO output to athe S-video input jack (or Y/C or S-VHS jack) on the TV.

Using the composite video output Use a composite video cable (yellow -supplied) to

connect the DVD receivers VIDEO output to the video input jack (or A/V In/Video In/Composite/ Baseband jack) on the TV.

75 UNBAL

FM ANT

SYSTEM CONNECTOR

PCM/DTS q DIGITAL

GND

AM ANT

VIDEO OUT (DVD ONLY) S VIDEO

VIDEO

TV IN AUX IN LINE OUT

COMPONENT

TO NX-SW300

DIGITAL IN

COAXIAL

TV

DVD Receiver

14

Connections

IMPORTANT! Progressive scan video quality is only

available when using Y PB PR in conjunction with a progressive scan TV.

Using component video output (Y PB PR)

1Use the component video cables (red/blue/green - not supplied) to connect the DVD receivers Y PB PR jacks to the corresponding component video input jacks (or Y Pb/Cb Pr/Cr/ YUV jacks) on the TV.

2Activate the progressive scan function (see Progressive function-(on/off) on page 32).

Connecting a progressive scan TV

Placing the speakers and subwoofer

For the best possible surround sound, all of the speakers (except the subwoofer) should be placed at the same distance from the listening position.

1 Place the front left and right speakers at equal distances from the TV.

2 Place the center speaker above the TV so that the center channels sound is localized.

3 Place the surround speakers at normal listening ear level facing each other or hang on the wall.

4 Place the subwoofer on the floor near the TV.

Notes: To avoid magnetic interference, do not position the

front speakers too close to your TV. Allow adequate ventilation around the DVD receiver

and subwoofer.

Surround Speaker (Left)

1 1

2

3 4 3

Front Speaker (Left)

Front Speaker (Right)

Subwoofer Surround Speaker (Right)

DVD Receiver Center speaker

75W UNBAL

FM ANT

SYSTEM CONNECTOR

PCM/DTS q DIGITAL

GND

AM ANT

VIDEO OUT (DVD ONLY) S VIDEO

VIDEO

TV IN AUX IN LINE OUT

COMPONENT

TO NX-SW300

DIGITAL IN

COAXIAL

DVD Receiver

TV

15

E n

g lish

Connections

1Connect the supplied AM loop antenna to the AM ANT terminal. Place the AM loop antenna on a shelf or attach it to a stand or wall.

2Connect the supplied FM wire antenna to the FM ANT terminal. Extend the FM wire antenna and fix its ends to the wall.

For better FM stereo reception, connect an external FM antenna (not supplied).

Notes: Adjust the position of the antennas for optimal

reception. Position the antennas as far as possible from your TV,

VCR or other sources of radiation to prevent unwanted interference.

Connecting the power cordConnecting FM/AM antennas

DVD Receiver

Subwoofer

System Control Cable

GND

AM ANT

V

FM ANT

After everything is connected properly, plug the AC power cord into the power outlet. Never make or change any connections with the power switched on.

Note: Refer to the type plate on the rear of the DVD

receiver and subwoofer for identification and supply ratings.

AM Loop Antenna

FM Wire Antenna

Fix the claw into the slot

Ground (GND terminal) For minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

75 UNBAL

FM ANT

SYSTEM CONNECTOR

PCM/DTS q DIGITAL

GND

AM ANT

VIDEO OUT (DVD ONLY) S VIDEO

VIDEO

TV IN AUX IN LINE OUT

COMPONENT

TO NS-SW300

DIGITAL IN

COAXIAL

75W UNBAL

FM ANT

GND

AM ANT

VIDEO OUT (DVD

TV IN AUX IN

COMPONE

1

2

To an AC wall outlet

TV

16

Connections

Connecting external AV components

75 UNBAL

FM ANT

SYSTEM CONNECTOR

PCM/DTS q DIGITAL

GND

AM ANT

VIDEO OUT (DVD ONLY) S VIDEO

VIDEO

TV IN AUX IN LINE OUT

COMPONENT

TO NX-SW300

DIGITAL IN

COAXIAL

2 4

1

3

VCR or Cassette Deck

Viewing and listening to playback 1Connect the VCR or cassette deck to the TV as

shown.

2Connect the DVD receivers AUX IN to the AUDIO OUT jacks on the VCR or cassette deck.

Before starting operation, press AUX to select AUX ANALOG in order to activate the input source.

Using the VCR for recording DVD playback Some DVDs are copy-protected. You cannot record or dub protected discs using a VCR.

3Connect the DVD receivers S VIDEO output to the S-VIDEO IN jack on the VCR.

4Connect the DVD receivers LINE OUT to the AUDIO IN jacks on the VCR. This will allow you to make analog stereo (two channels, right and left) recordings.

If you connect external AV equipment such as a VCR, cassette deck or digital audio component to the following AV jacks on the DVD receiver, you can enjoy those AV sources with the DVD receiver. Also, you can record AV sources played on the DVD receiver using the recording equipment. This section provides some examples of other AV equipment connections. For information on your AV equipment, refer to the manual for it.

Connecting a VCR or Cassette Deck

DVD Receiver

TV

17

E n

g lish

Connecting digital audio components

Digital Audio Component

75 UNBAL

FM ANT

SYSTEM CONNECTOR

PCM/DTS q DIGITAL

GND

AM ANT

VIDEO OUT (DVD ONLY) S VIDEO

VIDEO

TV IN AUX IN LINE OUT

COMPONENT

TO NX-SW300

DIGITAL IN

COAXIAL

Connections

Listening to playback Connect the DVD receivers DIGITAL IN to the

DIGITAL OUT jack on a digital audio component.

Before starting operation, press AUX repeatedly to select AUX DIGITAL in order to activate the input source.

Notes: You cannot hear or record the SA-CD or MP3-CD

playback if you use a digital connection. For playback through a digital connection, set the

digital output of that player to PCM format. Always refer to the owners manual of the connected

component for complete connection and usage details.

DVD Receiver

18

Getting Started

Inserting batteries into the remote control

1

3

2

1Open the battery compartment.

2 Insert two batteries type R06 or AA, following the indications (+/) inside the compartment.

3Close the cover.

To replace the batteries

If the batteries grow old, the effective operation distance of the remote control decreases considerably. If this happens, replace the batteries with two new ones as soon as possible.

Notes: Do not use an old battery together with new one. Do not use different types of batteries (for example,

alkaline and manganese) together. Each type of battery has its own characteristics even if they are similar in shape.

If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.

Dispose of the batteries according to the regional regulations.

If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or clothing. Before inserting new batteries, wipe the compartment clean.

Replace the batteries within two minutes to preserve the memory in the remote control.

Using the remote control

1Use the Remote Control within 6 m(20 feet) of the DVD receiver and point it toward the Remote control sensor.

2 Press Input selection buttons on the remote control to select the mode you wish to control (for example TV, DVD/CD). The selected source mode appears in the display panel.

3 Then select the desired function (for example 3/ 4 / ).

The remote control can also operate a television, cable TV or satellite connected to the DVD receiver. However, it is first necessary to enter the remote control code for the equipment in the remote controls memory (see Setting remote control codes on page 38).

Notes: Be careful not to spill liquid on the remote control. Be careful not to drop the remote control. Do not leave the remote control in the following

places: hot or humid places, such as near a

heater or in a bathroom extremely cold places dusty places

30 30

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV INPUT MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV

Within 6m (20 feet)

19

E n

g lishSetting the TV

IMPORTANT! Make sure you have completed all the necessary connections. (See Connecting a TV on page 13)

1 Press DVD/CD. DVD CD appears on the display panel.

2 Turn on the TV and set to the correct video-in channel. You should see the background screen on the TV. Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV manual for more details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV remote control may have a button or switch that chooses different video modes.

Getting Started

Selecting the color system that matches your TV In order for a DVD to play on this DVD receiver, the color system of the DVD, the TV and the DVD receiver should match. Before changing the TV system, determine the color system of your TV.

1 In DVD/CD mode, press SET UP.

2 Press 3 repeatedly to select [VIDEO SETUP PAGE].

3 Press 5 to highlight [TV TYPE], then press 3.

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

PAL

NTSC

MULTI

4 Press 5 to highlight one of the options below:

PAL Select this if the connected TV has the PAL color system. It will change the video signal of an NTSC disc and output it to PAL format.

NTSC Select this if the connected TV has the NTSC color system. It will change the video signal of a PAL disc and output it to NTSC format.

MULTI Select this if the connected TV is compatible with both NTSC and PAL (multi- system). The output format will be in accordance with the video signal of the disc.

5 Select a setting and press ENTER (OK). Follow the instructions shown on the TV to confirm the selection (if any). If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery to activate.

Setting the TV display Set the aspect ratio of the DVD receiver according to the TV you have connected. The format you select must be available on the disc. If it is not, the TV display setting will not affect the picture during playback.

1 In DVD/CD mode, press SET UP.

2 Press 3 repeatedly to select [VIDEO SETUP PAGE].

3 Press5 to highlight [TV DISPLAY], then press 3.

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

4:3 PAN SCAN

4:3 LETTER BOX

16:9

4 Press 5 to highlight one of the options below:

4:3 PAN SCAN Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.

4:3 LETTER BOX Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed.

16:9 Select this if you have a wide-screen TV.

5 Select a setting and press ENTER (OK).

VIDEO SETUP PAGE

VIDEO SETUP PAGE

To return to the previous menu, press 2. To clear the menu, press SET UP.

TIPS:

20

To return to the previous menu, press 2. To clear the menu, press SET UP.

Getting Started

TIPS:

Setting language preferences You can select your preferred language settings so that this receiver will automatically switch to your preferred language for you whenever you load a disc. If the language selected is not available on the disc, the discs default setting language will be used instead. The OSD (on-screen display) language for the system menu will remain as you set it, regardless of various disc languages.

On-screen display (OSD) language

1 In DVD/CD mode, press SET UP.

2 Press 3 to select [GENERAL SETUP PAGE].

3 Press5 to highlight [OSD LANGUAGE], then press 3.

DVD AUDIO

DISC LOCK

PROGRAM

OSD LANGUAGE

SCREEN SAVER

DiVX(R) VOD CODE

ENGLISH

FRANAIS

ESPAOL

4 Press5 to select a language and press ENTER (OK) to confirm.

GENERAL SETUP PAGE

Audio, Subtitle and Disc menu languages

1 Press 7 twice to stop playback (if any), then press SET UP.

2 Press 3 repeatedly to select [PREFERENCE PAGE].

3 Press5 to highlight one of the options below at a time, then press 3. [AUDIO] (discs soundtrack) [SUBTITLE] (discs subtitles) [DISC MENU] (discs menu)

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PBC

MP3/JPEG NAV

PASSWORD

DEFAULT

ENGLISH

CHINESE(SIMP)

FRENCH

SPANISH

PORTUGUESE

POLISH

ITALIAN

TURKISH

4 Press5 to select a language and press ENTER (OK) to confirm.

If the language you want is not in the list, then select [OTHERS]. Use the numeric keypad (0-9) on the remote control to enter the 4-digit language code XXXX (see Language Codes at the end of this manual) and press ENTER (OK) to confirm.

5 Repeat steps 3~4 for other settings.

PREFERENCE PAGE

21

E n

g lish

To return to the previous menu, press 2. To clear the menu, press SET UP.

Getting Started

TIPS:

Setting speaker channels You can adjust the delay times (for center and surround speakers only) and volume level for individual speakers. These adjustments let you optimize the sound of your system to best suit your surroundings and setup.

IMPORTANT! Press the SURR button on the remote control to select the multi-channel surround mode before adjusting the speaker settings.

1 Press 7 to stop playback, then press SET UP.

2 Press 3 repeatedly to select [AUDIO SETUP PAGE].

3 Press5 to highlight [SPEAKER SETUP], then press 3.

AUDIO SETUP PAGE

SPEAKER SETUP PAGE

[SPEAKERS VOLUME] Volume level setting for individual speakers (6dB ~ +6dB).

0dB

0dB

0dB

0dB

0dB

0dB

FRONT LEFT

FRONT RIGHT

CENTER

SUBWOOFER

SURROUND L

SURROUND R

[SPEAKERS DELAY] Delay time settings is in relation to the listening position/distance for center and surround speakers (0MS ~ 15MS).

0 MS 0 MS 0 MS

CENTER SURROUND L SURROUND R

6 Press 2 3 to adjust the setting that best suit your surround sound needs.

7 Press ENTER (OK) to confirm.

Notes: Use a longer delay time settings when the surround

speakers are closer to the listener than the front speakers.

A test tone will be automatically generated to help you judge the sound level of each speaker.

SPEAKERS VOLUME SETUP

SPEAKERS DELAY SETUP

4 Press5 to select a language and press ENTER (OK) to confirm.

5 Press5 to highlight one of the options below, then press 3.

22

Disc Operations

IMPORTANT! If the inhibit icon ( or X) appears on the

TV screen when a button is pressed, the function for that button is not available on the current disc or at the current time.

DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your receiver.

Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the disc player to malfunction.

Playing discs

1 Press DVD/CD until DVD CD appears on the display panel.

2 Turn on the TV power and set to the correct Video In channel (see Setting the TV on page 19). You should see the background screen on the TV.

3 Press 0 once to open the disc tray and load a disc, then press the same button again to close the disc tray.

Make sure the disc label is facing up.

4 Playback will start automatically. To playback a specific disc directly, press DISC SKIP repeatedly on the remote control or press DISC (1, 2, 3, 4, 5) on the front panel. Press PLAYXCHANGE on the front panel to open the disc tray and reload or unload discs without interrupting current disc playback. Playback will stop after all discs have been played. If a disc menu shows on the TV, see Using the disc menu on page 24. If the disc is locked by parental control, you must enter your six-digit password (see Restricting playback with Parental Control on page 33).

Auto Eco Power standby mode This is a power-saving feature. The receiver will automatically switch to Eco Power standby mode if you do not press any buttons for 30 minutes after a disc has stopped playing.

Basic playback controls

Pausing playback During playback, press 8 (38).

To resume normal playback, press (or 38).

Selecting another track/chapter Press 4 / or use the numeric keypad

(0-9) to enter a track/chapter number. During repeat playback of a track/chapter, pressing 4 / will replay the same track/ chapter.

Searching backward/forward Press and hold 4 / . To resume normal

playback, press (or 38). While searching, pressing 4 / again will increase the search speed.

Stopping playback Press 7.

Selecting various repeat/ shuffle functions

Repeat play mode Repeat chapter/title/disc (DVD-V) Each time you press REPEAT, the front display charges as follows;

CHAPTER*: repeats the current chapter TITLE: repeats the current title DISC*: repeats the entire disc ALL DISC: repeats all discs loaded in the tray

REPEAT OFF: exits repeat mode * This feature may not be available with some discs.

CHAPTER TITLE

DISC ALL DISCREPEAT OFF

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the disc.

23

E n

g lish

Disc Operations

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the disc.

Repeat track/disc (except DVD-V/DVD-A) Each time you press REPEAT, the front display changes as follows;

TRACK: repeats the current track DISC: repeats the entire disc ALL DISC: repeats all discs loaded in the tray

REPEAT OFF: exits repeat mode

Repeat track/group/disc (DVD-A) Each time you press REPEAT, the front display changes as follows;

TRACK: repeats the current track GROUP: repeats the current group DISC: repeats the entire disc ALL DISC: repeats all discs loaded in the tray

REPEAT OFF: exits repeat mode

Notes: When only one disc is available in the disc tray, it will

be continuously played when ALL DISC is selected.

For VCD, repeat playback is not possible if the PBC mode is selected.

Repeating a section within a chapter/track

1While playing a disc, press A-B at your chosen starting point.

2 Press A-B again at your chosen end point. A and B can only be set within the same chapter/track. The section will now repeat continuously.

3 To exit the sequence, press A-B.

Shuffle (except DVD/DVD- Audio/VCD/SVCD/DivX) With the Shuffle function, you can play tracks in random order.

1During playback, press SHUFFLE repeatedly to select between SHUFFLE DISC, SHUFFLE ALL DISC and SHUFFLE OFF. The selected mode appears in the display for several seconds.

In SHUFFLE DISC mode, all tracks on the disc currently playing are played in random order. For Hybrid SA-CDs, tracks on the SA-CD layer are played by default (see Playing Super Audio CDs (SA-CDs) on page 27).

In SHUFFLE ALL DISC, tracks from all discs are played in random order:

If the disc currently playing is a CD, only tracks from CDs and the CD layer of SA-CDs will be played.

If the disc currently playing is in SA-CD (SA-CD layer), MP3, WMA, tracks on the disc currently playing are played in random order. When all the tracks on that disc have been played, shuffle playback continues with the next disc.

TRACK DISC

REPEAT OFF ALL DISC

TRACK GROUP

DISC ALL DISCREPEAT OFF

24

Disc Operations

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the disc.

Displaying disc information and the current status You can display disc information and the discs current status (for example, title or chapter number, elapsed playing time, audio/subtitle language). A number of operations can be performed without interrupting disc playback.

Other operations for video playback (DVD/VCD/SVCD)

Using the disc menu Depending on the disc, a menu may appear on the TV screen once you load the disc.

To select a playback feature or item Use 2 35 keys or numeric keypad (0-9) on

the remote control, then press ENTER (OK) to start playback.

To access or remove the menu Press MENU on the remote control.

TITLE

CHAPTER

AUDIO

SUBTITLE

02/02

02/14

5.1CH

OFF

TRACK

DISC TIME

TRACK TIME

REPEAT

02/14

0:49:17

0:03:43

OFF

MENU

BITRATE 16 TOTAL ELAPSED 0:02:25

MENU

BITRATE 16 TITLE ELAPSED 0:02:25

TOP MENU/ RETURN

MENU

SUBTITLE

AUDIO

ON SCREEN

ZOOM ANGLE

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV INPUT MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV

1During playback, press ON SCREEN. A list of available disc information appears on the TV screen.

2 Press 5 to view the information and press ENTER (OK) to access.

3Use the numeric keypad (0-9) to enter the number/time or press 5 to make the selection, then press ENTER (OK) to confirm. Playback will change to the chosen time or to the selected title/chapter/track.

Zooming in This function allows you to enlarge the picture on the TV screen and pan through the enlarged picture.

1During playback, press ZOOM repeatedly to select a different zoom factor. Use 2 35 keys to move through the zoomed image. Playback continues.

2 Press ZOOM repeatedly to return to the original size.

25

E n

g lish

Disc Operations

Resuming playback from the last stopped point You can resume playback of the last 10 discs, even if the disc was ejected or this receivers power switched off.

1 Load one of the last played 10 discs. LOAD X (X=1~5) appears.

2 Press (or 38) and the disc will be played back from the last stop point.

To cancel the resume mode In stop mode, press 7 again.

Advancing by frame

1During playback, press 8 on the remote. Play will pause and sound will be mute.

2 Press 8 again to select the next picture frame.

3 To resume normal playback, press (or 38).

Changing sound track language This operation works only on DVDs with multiple soundtrack language, you can change the language you want while playing a DVD.

Press AUDIO repeatedly to select the available audio languages.

For VCD - changing the audio channel Press AUDIO repeatedly to select the available

audio channels provided by the disc (STEREO, LEFT MONO, RIGHT MONO or MIX MONO).

Changing subtitle language (DVD only) This operation works only on DVDs with multiple subtitle languages, you can change the language you want while playing a DVD.

Press SUBTITLE repeatedly to select from the various subtitle languages.

Viewing from another angle (DVD only) If the disc contains sequences recorded from different camera angles, this function allows you to view the picture from a number of different angles.

Press ANGLE repeatedly to select the desired angle. Playback changes to the selected angle.

Selecting a title (DVD only) Some DVDs may contain several titles. If the disc has been recorded with a title menu recorded on it, you can start playback from the selected movie title.

1 Press TOP MENU/RETURN. The disc title menu appears on the TV screen.

2Use 2 3 5 keys or numeric keypad (0-9) to select a play option.

3 Press ENTER (OK) to confirm.

Playback Control (PBC) (VCD only) PBC playback allows you to play Video CDs interactively, following the menu on the display. This function can also be accessed via the PREFERENCE PAGE menu (see PBC on page 34).

For VCDs with Playback Control (PBC) feature (version 2.0 only)

With playback stopped, press MENU to toggle between PBC ON and PBC OFF. If you select PBC ON, the disc menu (if available) will appear on the TV. Use 4 / or numeric keypad (0-9) to select a play option and press ENTER (OK) to confirm. If you select PBC OFF, the VCD will skip the index menu and playback directly from the beginning.

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the disc.

26

Disc Operations

Preview Function

Preview track/disc (DVD)

1 Press SCAN. The menu appears on the TV screen.

2 Press 5 to highlight [TITLE DIGEST], [CHAPTER DIGEST], [TITLE INTERVAL] or [CHAPTER INTERVAL].

3 Press ENTER (OK) to open one option.

TITLE DIGEST This function displays a thumbnail for the title to help you preview the the title of the disc.

CHAPTER DIGEST This function displays a thumbnail for each chapter to help you preview the chapters on the disc.

TITLE INTERVAL This function divides the disc into several sections at regular intervals, and displays them on one page to help you preview the entire disc.

CHAPTER INTERVAL This function divides a single chapter into several sections at regular intervals, and displays them on one page to help you preview the selected chapter.

(Example of 6 thumbnails in the display)

4Use 2 3 5 to select a title/chapter or use the numeric keypad (0-9) to input the selected title/ chapter number next to [SELECT].

5Use 4 / to open the previous or next page.

6 Press ENTER/OK to open confirm.

Preview group/track (VCD/SVCD)

1 Press SCAN. The menu appears on the TV screen.

2 Press 5 to highlight [GROUP DIGEST], [TRACK DIGEST], [GROUP INTERVAL] or [TRACK INTERVAL].

3 Press ENTER (OK) to open one option.

GROUP DIGEST This function displays a thumbnail for each group to help you preview the groups on the disc.

TRACK DIGEST This function displays a thumbnail for each track to help you preview the tracks on the disc.

GROUP INTERVAL This function divides a group into several sections at regular intervals, and displays them on one page to help you preview the selected group.

TRACK INTERVAL This function divides a single track into several sections at regular intervals, and displays them on one page to help you preview the selected track.

4Use 2 3 5 to select a group/track or use the numeric keypad (0-9) to input the selected group/track number next to [SELECT].

5Use 4 / to open the previous or next page.

6 Press ENTER/OK to open confirm.

To quit the preview function Use 2 35 to highlight [EXIT] and press ENTER/OK to confirm.

To return to the preview menu Use 2 35 to highlight [MENU] and press ENTER/OK to confirm.

SELECT DIGEST TYPE: TITLE DIGEST CHAPTER DIGEST TITLE INTERVAL CHAPTER INTERVAL

GROUP DIGEST TYPE: GROUP DIGEST TRACK DIGEST GROUP INTERVAL TRACK INTERVAL

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the disc.

27

E n

g lish

Disc Operations

The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the disc.

Playing MP3/JPEG/DivX discs This receiver can play DivX, MP3, JPEG, VCD and SVCD files on a personally recorded CD-R/RW disc or commercial CD.

IMPORTANT! You have to turn on your TV and set to the correct Video In channel (see Setting the TV on page 19).

1 Load the disc. The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. The disc menu appears on the TV screen.

MP3

MP3

MP3

MP3

2 Press 5 to select a desired folder and press ENTER (OK) to open the folder.

3 Press 5 to select a track/file.

4 Press ENTER (OK) to confirm. Playback will start from the selected file to the end of the folder.

While the disc menu is displayed, you can:

Press 4 / to select another track/file in the current folder.

To select another folder from the current disc, press 2 to return to the root menu, then press 5 to make your selection and press ENTER (OK) to confirm.

Press 8 to pause or (or 38) to resume playback.

Note: If you press 2 35 during playback of JPEG images, the picture rotates.

Playing MP3 music and a JPEG picture simultaneously

1 Load an MP3 disc containing both music and picture data. The disc menu appears on the TV screen.

2 Select an MP3 track and press (or 38) to start playback.

3During MP3 music playback, select a picture folder from the TV screen and press (or 38). The picture files will be played back until end of the folder.

4 To quit simultaneous playback, press MENU followed by 7.

Notes: It may not be possible to play certain MP3/JPEG/

DivX discs due to the configuration and characteristics of the disc or condition of the recording.

It is normal to experience an occasional skip while listening to your MP3 disc.

It is normal to experience an occasional pixelation during DivX playback due to poor clarity of digital contents during internet downloading.

For multi-session discs with different formats, only the first session will be available.

Playing Super Audio CDs (SA-CDs) There are three types of SA-CD discs: single layer, double layer and hybrid discs. Each type may contain up to two areas of recorded information: a High Quality Stereo area and a High Quality Multi-channel area. A single layer disc can contain both information

areas. A dual layer disc can contain both information

areas. Double the information can be stored on the disc, thanks to the second layer.

A hybrid disc can contain both information areas, and also a second, standard CD layer, making it playable on standard CD players.

TIPS:

28

Disc Operations

Preview Function This function shows the content of the current folder or the entire disc.

1During playback, press 7. 12 thumbnail pictures will appear on the TV screen.

2 Press 4 / to display the other pictures on the previous/next page.

3Use 2 35 to highlight one of the picture and press ENTER (OK) to start playback.

4 Press MENU to return to the picture CD menu.

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the disc.

1 Load the SA-CD. The disc menu appears on the TV screen.

2 Playback will start automatically. If the SA-CD consists of multi-channel and stereo tracks, multi-channel tracks will have the priority for playback. To playback stereo tracks, use 5 to make your selection from the disc menu, then press (or 38).

Note: Programming SA-CD tracks is not possible.

Special features for picture disc playback

IMPORTANT! You have to turn on your TV and set to the correct Video In channel (see Setting the TV on page 19).

Load a picture disc (Kodak Picture CD/JPEG). For Kodak discs, the slide show begins. For JPEG discs, the picture menu appears on the TV screen. Press (or 38) to start the slide- show.

Zooming pictures 1During playback, press ZOOM repeatedly to select

a different zoom factor.

2Use 2 35 keys to move through the zoomed image.

Multi-angle playback During playback, use 2 35 to rotate/flip the

picture on the TV screen.

5 : flips the picture vertically : flips the picture horizontally 2 : rotates the picture anti-clockwise 3 : rotates the picture clockwise

Scan Effect Press ANGLE repeatedly to choose a different

scan effect. Various scan effects appear in the top left corner of the TV screen.

1

2

3

SA-CD Disc Type

Single layer disc Dual layer disc

Hybrid layer disc

HD layer HD layer HD layer

CD layer

Hybrid SA-CD-Disc

CD layer that plays on any CD player High Density layer containing:

- High Quality DSD Stereo

- High Quality DSD Multi- channel

29

E n

g lish

DVD Setup Menu Options

TIPS: To return to the previous menu, press 2. To clear the menu, press SET UP.

This setup is carried out via the TV, enabling you to customize the DVD receiver to suit your particular requirements.

General Setup menu

1 In DVD/CD mode, press SET UP.

2 Press 2 3 to select the General Setup icon.

3 Press ENTER (OK) to confirm.

DVD AUDIO

DISC LOCK

PROGRAM

OSD LANGUAGE

SCREEN SAVER

DiVX(R) VOD CODE

Selecting DVD-Audio/Video mode

1 In GENERAL SETUP PAGE, presss 5 to highlight [DVD-AUDIO], then press 3.

DVD-AUDIO MODE Select this for normal playback.

DVD-VIDEO MODE Select this to playback the contents of the DVD- Video.

2 Press 5 to select a setting, then press ENTER (OK) to confirm your selection.

Notes: The DVD-AUDIO indicator lights up when a DVD-

Audio disc is playing. When you select DVD-VIDEO MODE, the DVD-

AUDIO indicator goes out.

Locking/Unlocking discs for viewing Not all discs are rated or coded by the manufucturer of the disc. You can prevent playback of a specific disc by locking the disc. You can lock up to 40 discs on this unit.

1 In GENERAL SETUP PAGE, press 5 to highlight [DISC LOCK], then press 3.

UNLOCK Select this to unlock the disc and allow future playback.

LOCK Select this to block playback of the current disc. Subsequent access to a locked disc requires a six- digit password. The default password is 000 000 (see Changing the password on page 34).

2 Press 5 to select a setting and press ENTER (OK) to confirm.

GENERAL SETUP PAGE

Programming disc tracks (except for Picture CD/MP3/SA-CD discs) You can playback the contents of a disc in the order you want by programming the tracks to be played. You can store up to 20 tracks.

Program: Track (except for Picture CD/MP3/ WMA/DivX)

1 Press PROG on the remote control. OR In GENERAL SETUP PAGE, press 34 to highlight [PROGRAM], then press 2 to select [FTS].

2 Press ENTER (OK) to confirm.

2

6

7

8

9

10

To program your favorite tracks/chapters 3Use the numeric keypad (0-9) to enter a valid

track/chapter number.

30

DivX VOD registration code Yamaha provides you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit us at www.divx.com/vod.

1 In GENERAL SETUP PAGE, press 5 to highlight [DIVX(R) VOD CODE], then press 3. The registration code appears.

2 Press ENTER (OK) to exit.

3Use the registration code to purchase or rent the videos from DivX VOD service at www.divx.com/ vod. Follow the instructions and download the video onto a CD-R/RW for playback on this receiver.

Notes: All the videos downloaded from DivX VOD can only

be played back on this receiver. The time search function is not available during

DivX movie playback.

To start program playback 8 Use 2 35 to highlight [START] on the program

menu, then press ENTER (OK). Playback starts for the selected tracks in the programmed sequence.

To exit program playback 9Use 2 35 to highlight [EXIT] on the program

menu, then press ENTER (OK).

OSD Language This menu contains various language options for displaying languages on the screen. For details, see On-screen display (OSD) language on page 20.

Screen Saver - (on/off) The screen saver helps prevent your TV display from becoming damaged.

1 In GENERAL SETUP PAGE, press 5 to highlight [SCREEN SAVER], then press 3.

ON Select this if you wish to turn off the TV screen when play is stopped or paused for more than 15 minutes.

OFF Select this to disable the screen saver function.

2 Press 5 to select a setting and press ENTER (OK) to confirm.

4Use 2 35 to move the cursor to the next position. If the track number is more than ten, press T to open the next page and proceed with programming, OR Use 2 35 to highlight [NEXT] on the program menu, then press ENTER (OK).

5 Repeat steps 3~4 to input another track/chapter number.

If you want to remove a track 6Use 2 35 keys to move the cursor to the track

you want to remove.

7 Press ENTER (OK) to remove this track from the program menu. Program: Disc

You can playback discs in the order you want by programming the discs to be played. You can store up to 5 discs.

1 In GENERAL SETUP PAGE, press 5 to highlight [PROGRAM], then press 3 to select [FDS].

2 Press ENTER (OK) to confirm.

To input your favorite discs

3Use the numeric keypad (0-9) to enter a valid disc number.

4Use 2 35 to move the cursor to the next position.

5 Repeat steps 3~4 to input another disc number.

If you want to remove a disc

6Use 2 35 to move the cursor to the disc you want to remove.

7 Press 0 on the numeric keypad (0-9) to remove this disc from the program menu.

TIPS: To return to the previous menu, press 2. To clear the menu, press SET UP.

DVD Setup Menu Options

(1) Disc : _

(2) Disc : _

(3) Disc : _

(4) Disc : _

(5) Disc : _

FAVOURITE DISC SELECTION

31

E n

g lish

DVD Setup Menu Options

TIPS: To return to the previous menu, press 2. To clear the menu, press SET UP.

Audio Setup Menu

1 In DVD/CD mode, press SET UP.

2 Press 2 3 to select Audio Setup icon.

3 Press ENTER (OK) to confirm.

SPEAKER SETUP

CD UPSAMPLING

NIGHT MODE

Speaker Setup This menu contains setup options for audio output so that you can set your speakers to reproduce high quality surround sound. For details, see Setting speaker channels on page 21.

CD upsampling This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.

If you have activated the upsampling function, the receiver will automatically switch to stereo mode.

1 In AUDIO SETUP PAGE, press 5 to highlight [CD UPSAMPLING], then press 3.

OFF Select this to disable CD-upsampling.

88.2 kHz (X2) Select this to convert the sampling rate of CDs to twice that of the original.

2 Press 5 to select a setting and press ENTER (OK) to confirm.

Note: If you select Multi-Channel mode, the CD

upsampling feature will be cancelled.

Night Listening Mode - (on/off) When night listening mode is activated, high volume output is softened and low volume output brought upward to an audible level (for DVD only). It is useful for watching your favourite action movie without disturbing others at night. This function is only available for Dolby Digital.

1 In AUDIO SETUP PAGE, press 5 to highlight [NIGHT LISTENING MODE], then press 3.

OFF Select this when you want to enjoy the full dynamic range of surround sound.

ON Select this to level out the volume.

2 Press 5 to select a setting and press ENTER (OK) to confirm.

AUDIO SETUP PAGE

Video Setup Menu

1 In DVD/CD mode, press SET UP.

2 Press 2 3 to select Video Setup icon.

3 Press ENTER (OK) to confirm.

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

TV Type This menu contains the options for selecting the color system that matches the connected TV. For details, see Selecting the color system that matches your TV on page 19.

TV Display This menu contains options for matching the aspect ratio of the receiver to the connected TV. For details, see Setting the TV display on page 19.

VIDEO SETUP PAGE

32

Progressive function - (on/off) The progressive scan display present 60 complete frames per seconds, rather than 30 frames per second of interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and eliminates bothersome motion artifacts those jagged edge on moving objects.

IMPORTANT! Before enabling the progressive scan function, you must ensure: 1)Turn on your TV progressive scan function (refer

to your TV owners manual). 2)You have connected the DVD receiver

to your TV using Y PB PR (see Connecting a Progressive Scan TV on page 14).

1 In VIDEO SETUP PAGE, press 5 to highlight [PROGRESSIVE], then press 3.

OFF Select this to disable progressive scan function.

ON Select this to enable progressive scan function.

2 Press 5 to select a setting and press ENTER (OK) to confirm. Follow the instructions shown on the TV to confirm the selection (if any). If a blank/distorted TV screen appears, wait for 15 seconds for auto recovery to activate.

DVD Setup Menu Options

TIPS: To return to the previous menu, press 2. To clear the menu, press SET UP.

Picture settings This receiver comes with three predefined sets of picture color settings and one personal setting that you can define yourself.

1 In VIDEO SETUP PAGE, press 5 to highlight [PICTURE SETTING], then press 3.

STANDARD Select this for the standard picture setting.

BRIGHT Select this to make the TV picture brighter.

SOFT Select this to make the TV picture softer.

PERSONAL Select this to personalise your picture color by adjusting the brightness, contrast, tint and color (saturation).

0 0 0 0

BRIGHTNESS CONTRAST TINT COLOR

PERSONAL PICTURE SETUP

2 Press 5 to select a setting and press ENTER (OK) to confirm.

3 If you select [PERSONAL], proceed to steps 4~7. The PERSONAL PICTURE SETUP menu appears.

4 Press 5 to highlight one of the following options.

BRIGHTNESS Increase the value to brighten the picture or vice versa. Zero (0) is the average setting value.

CONTRAST Increase the value to sharpen the picture or vice versa. Zero (0) is the average contrast.

TINT Increase or decrease the value to change the color phase of the picture. Zero (0) is the average setting value.

COLOR Increase the value to enhance the color in your picture or vice versa. Zero (0) is the average color setting value.

5 Press 2 3 to adjust the setting that best suits your personal preference.

6 Repeat steps 4~5 to adjust other color features if desired.

7 Press ENTER (OK) to confirm.

Selecting the black level (U.S.A. model only) If you set the TV type to NTSC, set Black level shift to ON. This will improve the color contrast during playback. The black level setting has no effect if the TV type is set to PAL.

ON Select this to enhance the black level.

OFF Select this for the standard black level setting.

33

E n

g lish

Closed Caption (U.S.A. model only) Closed captions are data hidden in the video signals of specific discs, and are invisible without the use of a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. Subtitles rarely show all of the audio. For example, captions show sound effects (e.g., phone ringing and footsteps), while subtitles do not. Before you select this function, please ensure that the disc contains closed caption information and your TV set also supports this function.

1 In VIDEO SETUP PAGE, press 5 to highlight [CLOSED CAPTION], then press 3.

ON To enable the closed caption function.

OFF To disable the closed caption function.

1 Press 5 to select a setting, then press ENTER (OK) to confirm your selection.

DVD Setup Menu Options

TIPS: To return to the previous menu, press 2. To clear the menu, press SET UP.

Preference Setup Menu

1 Press 7 twice to stop playback (if necessary), then press SET UP.

2 Press 2 3 to select the Preference Setup icon.

3 Press ENTER (OK) to confirm.

Restricting playback with Parental Control

Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children, or play alternative scenes for certain discs.

1 In PREFERENCE PAGE, press 5 to highlight [PARENTAL], then press 3.

AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV PASSWORD DEFAULT

1 KID SAFE 2 G 3 PG 4 PG 13 5 PGR 6 R 7 NC 17 8 ADULT

2 Press 5 to highlight a rating level for the disc inserted and press ENTER (OK).

3Use the numeric keypad (0-9) to enter the six- digit password (see Changing the password on page 34). DVDs that are rated above the level you select will not play unless you enter the six-digit password.

Rating explanations

1 KID SAFE 2 G General audience; recommended as acceptable for

viewers of all ages.

3 PG Parental guidance suggested.

4 PG13 Material is unsuitable for children under age 13.

5 PGR 6 R Parental guidance - restricted; recommended that

parents restrict children under 17 from viewing, or allow to view only when supervised by a parent or adult guardian.

PREFERENCE PAGE

AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV PASSWORD DEFAULT

PREFERENCE PAGE

Audio, subtitle and disc menus These menus contain various language options for the audio, subtitle and disc menus recorded on the DVD. For details, see Audio, Subtitle and Disc menu languages on page 20.

34

DVD Setup Menu Options

TIPS: To return to the previous menu, press 2. To clear the menu, press SET UP.

7 NC-17 Not for children under age 17; not recommended

viewing for children under age 17.

8 ADULT Mature material; should be viewed only by adults due

to the inclusion of graphic sexual material, violence or language.

Notes: VCD, SVCD, CD have no level indication, so the

parental control function has no effect with these types of discs. This also applies to most illegal DVDs.

Some DVDs are not encoded with a rating though the movie rating may be printed on the disc cover. The rating level feature does not prohibit play of such discs.

PBC You can set PBC to ON or OFF. This feature is available only on Video CD 2.0 with the playback control (PBC) feature. For details, see Playback Control (PBC) (VCD only) on page 25.

MP3/JPEG Menu - (on/off) MP3/JPEG Navigator can be set only if the disc was recorded with a menu. It allows you to select different display menus for easy navigation.

1 In PREFERENCE PAGE, press 5 to highlight [MP3/JPEG NAV], then press 3.

WITH MENU Select this to display only the folder menu of the MP3/Picture CD.

WITHOUT MENU Select this to display all the files contained in the MP3/Picture CD.

2 Press 5 to select a setting, then press ENTER (OK) to confirm.

Changing the password The same password is used for both Parental Control and Disc Lock. Enter your six-digit password to play a prohibited disc or if prompted for a password. The default password is 000 000.

1 In PREFERENCE PAGE, press 5 to highlight [PASSWORD], then press 3 to select [CHANGE].

AUDIO SUBTITLE DISC MENU PARENTAL PBC MP3/JPEG NAV PASSWORD DEFAULT

CHANGE

2 Press ENTER (OK) to enter the Password Change Page.

3 Use the numeric keypad (0-9) to enter your old six-digit password. When doing this for the first time, enter 000 000. If you forget your old six-digit password, enter 000 000.

4 Enter the new six-digit password.

5 Enter the new six-digit password a second time to confirm. The new six-digit password is now valid.

6 Press ENTER (OK) to confirm.

PREFERENCE PAGE

Restoring to original settings Setting the DEFAULT function will reset all options and your personal settings to the factory defaults, except your password for Parental Control and Disc Lock.

1 In PREFERENCE PAGE, press 5 to highlight [DEFAULT], then press 3 to select [RESET].

2 Press ENTER (OK) to confirm. All settings are reset to the factory defaults.

35

E n

g lish

Presetting radio stations You can store up to 20 FM and 10 AM preset radio stations in this receivers memory.

Notes: The receiver will exit presetting mode if no button is

pressed within 20 seconds. If no valid frequency is detected during Plug and Play,

CH CK ANT NNA appears.

Using Plug and Play Plug and Play allows you to store all available radio stations automatically.

1 Press TUNER. AUTO PR S T and PR SS PLAY appear one after the other if installation was not completed after you purchased the DVD receiver.

2 Press 3 on the front panel to start installation. AUTO PR S T appears. Once complete, the last tuned radio station will play. All available FM stations are stored, followed by all available AM stations.

To stop installation, press 7.

IMPORTANT! Make sure the FM and AM antennas are connected to this receiver.

Tuning radio stations

1 Press TUNER to select TUN R M or TUN R AM.

2 Press 5 briefly on the remote control. "S ARCH" appears. The next radio station is tuned automatically.

3 Repeat step 2 (if necessary) until you find the desired radio station.

4 To tune weak stations, press 2 3 briefly and repeatedly until the optimal reception is found.

If the FM station reception is weak, you can switch the FM mode from stereo to mono. Press SURR to toggle through:

DOLBY PL II FM STEREO DOLBY PL II FM MONO STEREO FM MONO STEREO FM STEREO

Tuner Operations

Automatic presetting You can start automatic presetting by pressing a selected preset number.

1 Press TUNER to select TUN R M or TUN R AM.

2 Press 4 / or use the numeric keypad (0-9) to select a preset number to begin.

3 Press and hold PROG until AUTO PR S T appears. If a radio station is stored in one of the earlier presets, the same radio station will not store under another preset number. If no preset number is selected, automatic preset will begin from preset (1) and all former presets will be overridden.

Manual presetting

You can choose to store only your favourite radio stations.

1 Tune the desired radio station (see Tuning radio stations).

2 Press PROG.

3 Press 4 / to select a preset number.

4 Press PROG again to store.

Numeric keypad (0-9)

dPRESETu (4 / )

PROG

TUNER

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV INPUT MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV

36

Tuner Operations

Selecting a preset radio station

Press 4 / or use the numeric keypad (0-9) to select a preset number. The waveband, preset number, then radio frequency will appear.

Deleting a preset radio station Press and hold 7 on the front panel until AMXX

D LTD or MXX D LTD (XX = preset number) appears. The current preset radio station is deleted.

Setting frequency step (Australia model only)

The inter-station frequency spacing differs depending on the areas. Set the frequency step according to the frequency spacing in your area.

Choices: AM9kHz/FM50kHz AM10kHZ/FM100kHz

Default setting: AM9/FM50

To change the AM band to 10kHz and the FM band to 100kHz

1Unplug the AC power cord from the DVD receiver.

2While pressing and holding INPUT and 4 on the front panel, plug the AC power cord to the DVD receiver.

37

E n

g lish

IMPORTANT! For proper surround sound, make sure the speakers and subwoofer are connected to this receiver (see Connecting the DVD receiver and speakers to the subwoofer on page 11).

Selecting surround sound Press SURR on the remote control to select:

MULTI-CHANNEL or STEREO. The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc. The center and surround speakers operate only in multi-channel surround mode. The available output modes for multi-channel include: Dolby Digital, DTS (Digital Theatre Systems) Surround and Dolby Pro Logic II. Stereo broadcasts or recordings produce some surround channel effects when played in a surround mode. However, mono (single channel sound) sources do not produce any sound from the surround speakers.

Notes: The SURR button is not functional for SA-CD

playback. You must access the disc menu in order to select between multi-channel and stereo tracks, (see Playing Super Audio CDs (SA-CDs) on page 27).

The surround sound mode cannot be selected if the system setup menu is selected.

Selecting digital sound effects You can select preset digital sound effects that match the content of your disc, or that optimize the sound of the musical style you are playing.

Press EFFECT to select from the available sound effects.

When playing movie discs or while in TV mode, you can select: CONCERT, DRAMA, ACTION or SCI-FI.

When playing music discs or while in TUNER or AUX mode, you can select: ROCK, DIGITAL, CLASSIC or JAZZ.

Notes: Digital sound effects and the treble/bass features

cannot be activated at the same time. For flat sound output, select CONCERT or CLASSIC.

Adjusting the treble/bass level The TREBLE (high tone) and BASS (low tone) features enable you to define the sound-processor settings.

1 Press TRE or BASS on the remote control.

2Within five seconds, press VOL (+ / ) to adjust the treble or bass level (MIN, 2, 1, 0, +1, +2 or MAX). If the volume control is not used within five seconds, it will resume its normal volume control function.

TV VOL TV CH

EFFECT SURR

VOL

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

TV INPUT MUTE

DISC SKIP

TRE

BASS

EFFECT

SURR

TRE/BASS

VOL (+ / )

Sound Controls

38

Volume Control and Other Functions

Adjusting the volume level

Use the VOLUME control (or press VOL (+ / ) on the remote control) to increase or decrease the volume level. VOL MIN is the minimum volume level and VOL MAX is the maximum volume level.

To mute the volume temporarily Press MUTE on the remote control.

Playback will continue without sound and MUT appears. To restore the volume, press MUTE again or increase/decrease the volume level.

Switching to active mode Press TUNER repeatedly on the remote control

to select the appropriate active mode. Each time you press TUNER, the front display changes as follows;

Press AUX repeatedly on the remote control to select the appropriate active mode. Each time you press AUX, the front display changes as follows;

Switching to eco power standby mode

Press STANDBY/ON on the front panel or POWER (B/I) on the remote control. The display screen goes blank.

AUX/ANALOG

AUX/DIGITAL

TUNER/FM

TUNER/AM

Setting remote control codes Once you set the appropriate remote control codes, you can use this remote to control your other components. The remote control automatically switches to the appropriate control mode for that component.

For the TV button you can set aTV remote control code and for the AUX button you can set a cable or satellite tuner remote control code.

1 Press and hold TV or AUX.

2 Press PROG, then release both keys.

3 Press the numeric keypad (0~9) to enter the 4 digit remote control codes (see Remote Control Codes at the end of this manual).

4 Press PROG again to store.

TV

Numeric keypad (0-9)

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV

TV INPUT

PROG

AUX

39

E n

g lish

Other Functions

Controlling other components You can operate other components if you have set the remote control code for your component in the remote control. Note that some buttons may not correctly operate the selected component.

TV operations

Press TV for TV opeations

Functions for TV operation

POWER (TV)* Turn the TV on, or set it to the standby mode.

TV VOL (+ / ) * Adjust the TV volume level.

TV INPUT* Switches the TV inputs.

Numeric keypad (0-9) Enters a number of a TV channel.

TV CH (+ / ) * Switches the TV channels.

* : You can also operate these functions in DVD/ CD or TUNER mode.

Cable and satellite tuner operations

Press AUX for the cable and satellite tuner operations.

Functions for cable and satellite tuners

POWER (TV) Turn the cable and satellite tuner on, or set them to the standby mode.

ENTER (OK) Confirm a selection.

Numeric keypad (0-9) Cable: enters a number of a cable channel. Satellite tuner: enters a number of a preset radio station.

TV CH (+ / ) Switches the cable or satellite tuner channel.

POWER (TV)

ENTER (OK)

Numeric keypad (0-9)

TV CH (+ / ) TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV

TV INPUT

TV VOL TV CH

EFFECT SURR

VOL

TRE

MENU SET UP

PRESET

SUBTITLE AUDIO ANGLE ZOOM

TV AUX TUNER DVD/CD

MUTE

BASS

ENTER

TOP MENU/RETURN ON SCREEN

PROG REPEAT A - B SHUFFLE

SCAN PAGE

DIMMERPOWER POWERSLEEP

DISC SKIP

TV

TV INPUT

POWER (TV)

TV INPUT

TV VOL (+ / )

Numeric keypad (0-9)

TV CH (+ / )

40

Recording on an external AV component

1Connect the external recording component to LINE OUT (See Connecting external AV components on page 16).

2 Select the source to record from this DVD receiver (DVD/CD, TUNER, TV or AUX) and start playback (if necessary).

3 Start recording on the external recording device.

Note: Refer to the owners manual of the connected

equipment for details.

Dimming the display screen

In any active mode, press DIMMER on the remote control to select the desired brightness:

DIM 1: 70% brightness DIM 2: 40% brightness DIM OFF: normal brightness

Setting the sleep timer The sleep timer switches the receiver to Eco Power standby mode automatically at the preset time.

1 Press SLEEP on the remote control until SL P

XX appear on the display panel (XX = 15, 30, 45, 60 or OFF).

2 To select the next sleep timer value, continue pressing SLEEP while in sleep timer mode until the desired turn-off time is displayed. SLEEP appears on the display panel, except when SL P O is selected. Before the receiver switches to Eco Power standby mode, a countdown of 10 seconds is displayed.

SL P 1 SL P 9.... SL P 2 SL P 1

To cancel the sleep timer

Press SLEEP until SL P O appears.

Other Functions

41

E n

g lish

Troubleshooting

WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate your warranty. Do not open the system to avoid the risk of electric shock.

If a fault occurs, check the following before taking the system to be repaired. If you are unable to remedy a problem by following the hints below, consult your dealer or Yamaha for help.

Problem

No power

No picture

Completely distorted picture or

black/white picture

The aspect ratio of the screen cannot be changed

even though you have set the TV display.

No sound or distorted sound.

Sound is too low on one side.

Cannot activate some features such as Angles,

Subtitles, or multi-language Audio.

DVD videos cannot be copied with the VCR.

The disc is ejected without an operation.

NOTE: When sending the product for servicing, both the DVD receiver and the subwoofer are required.

Check if the AC power cord is properly connected.

Press STANDBY/ON on the front of the receiver to turn

on the power.

Refer to your TVs manual for correct Video In channel

selection. Change the TV channel until you see the DVD

screen.

Press DVD/CD on the remote control in order to switch

to DVD/CD mode.

If this happens when you are changing the setting of the TV

TYPE, wait for 15 seconds for auto recovery.

If this happens when you are turning on the progressive

scan feature, wait for 15 seconds for auto recovery.

Check the video connection.

Sometimes a small amount of picture distortion may appear.

This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the

aspect ratio.

Adjust the volume.

Check if the system cable is properly connected.

Check if all speaker cables are properly connected.

Make sure that the audio cables are connected and press

the Input selection buttons to select the correct input

source (TV or AUX, for example) to choose the equipment

that you want to hear through the DVD receiver.

Check if the AC power cord of the subwoofer is properly

connected.

Make sure that you use a disc supported by the DVD player.

Check if all cables are properly connected.

The features may not be available on the DVD.

Changing the language for the sound or subtitle is

prohibited on the DVD.

Most commercially available DVDs include copy protect

features. You cannot make a copy of these DVDs.

Make sure that you use a disc supported by the DVD

receiver.

Solution

42

Troubleshooting

Not able to select some Items in the setup/

system menu.

The DVD receiver does not start playback.

Sound played on the DVD receiver cannot be

recorded with an external recorder.

Sounds played on the AV equipment connected

to the DVD receiver cannot be recorded with

external recording equipment.

The volume does not increase or sounds are

distorted.

There is no sound from the center, surround

speakers and subwoofer.

SPEAKER ERR appears in the display panel.

Radio reception is poor.

Press STOP button twice before selecting the setup/system

menu.

Depending on the disc availability, some menu items cannot be

selected.

Insert a readable disc with the playback side facing down. The

DVD-R/DVD+R/DVD-RW/DVD+RW/CD-R/CD-RW must be

finalized.

Check the disc type, color system (PAL or NTSC) and region

code.

Check for any scratches or smudges on the disc.

Press SET UPto turn off the setup menu screen.

You may need to enter the password in order to change the

parental control rating level or to unlock the disc for playback.

Moisture has condensed inside the player. Remove the disc and

leave the receiver turned on for about an hour.

Use proper audio sources.

Connect those equipment to the DVD receiver with analog

connections.

Turn on the power of the component connected to the DVD

receiver.

Make sure the center, surround speakers and subwoofer are

connected correctly.

Adjust the volume level in the setup menu.

Press SURR button to select a correct surround sound setting.

Make sure the source you are playing is recorded or broadcast

in surround sound (DTS, Dolby Digital, etc.).

Unplug the subwoofer, then make sure the front, center and

surround speakers are connected correctly.

Set the DVD receiver to the standby mode, then disconnect

the power cord. Wait for about 30 seconds, then reconnect

the power cord and turn on the DVD receiver.

If the signal is too weak, adjust the antenna or connect an

external antenna for better reception.

Increase the distance between the receiver and your TV or

VCR.

Tune in to the correct frequency.

Place the antenna farther away from any equipment that may

be causing the noise.

Problem Solution

NOTE: When sending the product for servicing, both the DVD receiver and the subwoofer are required.

43

E n

g lish

Troubleshooting

NOTE: When sending the product for servicing, both the DVD receiver and the subwoofer are required.

The remote control does not function properly.

The remote control does not work for operating

other equipment.

Unable to play DivX movies.

The DVD receiver does not work.

Select the source (DVD/CD or TUNER, for example)

before pressing the function button (3, 4 / ).

Reduce the distance between the remote control and the

receiver.

Replace the batteries with new ones.

Point the remote control directly toward the remote

control sensor.

Check that the batteries are loaded correctly.

Set the correct remote control code. Depending on the

model and year of the product, the DVD receivers remote

control may not be able to operate it partly or wholly. In

this case, use the remote control supplied with each

procduct.

Check that the DivX file was encoded in Home Theater

mode with a DivX 5.x encoder.

Disconnect the power cord from the power outlet for a

few minutes. Reconnect the power cord and try to

operate again as usual.

Problem Solution

44

Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO output: Red and white jacks on the back of the DVD receiver that send audio to another system (TV, Stereo, etc.). Bit rate: The amount of data used to hold a given length of music; measured in kilobits per second, or kbps. Also, the speed at which you record. Generally, the higher the bit rate, or recording speed, the better the sound quality. However, higher bit rates use more space on a Disc. Chapter: Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters. Each chapter is assigned a chapter number enabling you to locate the chapter you want. COMPONENT VIDEO OUT: Jacks on the back of the DVD receiver that send high-quality video to a TV that has Component Video In jacks (R/G/B, Y/Pb/Pr, etc.). Disc menu: A screen display prepared for allowing selection of images, sounds, subtitles, multi-angles, etc recorded on a DVD. DivX 3.11/4.x/5.x: The DivX code is a patent-pending, MPEG-4 based video compression technology, developed by DivXNetworks, Inc., that can shrink digital video to sizes small enough to be transported over the internet, while maintaining high visual quality. Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right, center and subwoofer). Dolby Surround Pro Logic II: It is an improved matrix decoding technology that provides better spatiality and directionality on Dolby Surround programme material; provides a convincing three-dimensional soundfield on convertional stereo music recordings; and is ideally suited to bring the surround experience to automotive sound. While conventional surround programming is fully campatible with Dolby Surround Pro Logic II decoders, soundtracks will be able to be encoded specifically to take full advantage of Pro Logic II playback, including separate left and right surround channels. (Such material is also compatible with conventional Pro Logic decoders). DTS: Digital Theater Systems. This is a surround sound system, but it is different from Dolby Digital. The formats were developed by different companies. JPEG: A very common digital still picture format. A still- picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. MP3: A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. By using the MP3 format. One CD-R or CD-RW can contain about 10 times more data then a regular CD.

Multi-channel: DVDs are formatted to have each sound track constitute one sound field. Multichannel refers to a structure of sound tracks having three or more channels. Parental control: Limits Disc play according to the age of the users or the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the softwares level is higher than the user-set level. Playback control (PBC): Refers to the signal recorded on video CDs or SVCDs for controlling playback. By using menu screens recorded on a Video CD or SVCD that supports PBC, you can enjoy interactive playback and searching.Glossary Plug and Play: When Tuner mode is selected for the first time, the receiver will prompt the user to proceed with the automatic installation of radio stations by simply pressing the PLAY button on the main unit. Progressive Scan: It displays all the horizontal lines of a picture at one time, as a signal frame. This receiver can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. Region code: A receiver allowing discs to be played only in the region designated. This unit will only play discs that have compatible region codes. You can find the region code of your unit by looking on the product label. Some discs are compatible with more than one region (or ALL regions). S-video: Produces a clear picture by sending separate signals for the luminance and the color. You can use S-video only if your TV has an S-video In jack. Super Audio CD (SA-CD): This audio format is based upon the current CD standards but includes a greater amount of information that provides higher quality sound. There are three types of discs: single layer, double layer and hybrid discs. The hybrid disc contains both standard audio CD and Super Audio CD information. Surround: A receiver for creating realistic three-dimensional sound fields full of realism by arranging multiple speakers around the listener. Title: The longest section of a movie or music feature on DVD. Each title is assigned a title number, enabling you to locate the title you want. VIDEO output: Yellow jack on the back of the DVD receiver that sends the DVD picture video to a TV.

Glossary

45

E n

g lish

Specifications

DVD RECEIVER (DVR-C300) Power Supply Rating - U.S.A. and Canada

Models 120 V, 60 Hz - Australia Model 240 V, 50 Hz Power Consumption 20 W Dimensions (W x H x D) 435 x 75 x 434 mm Weight 5.6 kg

FRONT SPEAKER (NX-F300) System 2-way, Bass Reflex System Impedance 6 Speaker Drivers 6.5 cm (2.5) woofer + 2.5cm (1) Frequency Response 150 Hz 20 kHz Dimensions (W x H x D) 83 x 181 x 78 mm Weight 0.7 kg/speaker

CENTER SPEAKER (NX-C300) System 2-way, Bass Reflex System Impedance 6 Speaker Drivers 6.5 cm (2.5) Full range x 2 + Piezo Frequency Response 150 Hz 20 kHz Dimensions (W x H x D) 298 x 84 x 78 mm Weight 1.1 kg

SURROUND SPEAKER (NX-S300) System 2-Way, Bass Reflex System Impedance 6 Speaker Drivers 6.5 cm (2.5) Full Range + Piezo Frequency Response 150 Hz - 20 kHz Dimensions (W x H x D) 83 x 181 x 78 mm Weight 0.6 kg/speaker

SUBWOOFER (NX-SW300) Power Supply Rating - U.S.A. and Canada

Models 120 V, 60 Hz - Australia Model 240 V, 50 Hz Power Consumption 360 W System Bass Reflex System Impedance 6 Speaker Driver 16 cm (6 1/2) woofer Frequency Response 40 Hz 150 Hz Dimensions (W x H x D) 178x 402 x 461 mm Weight 12 kg

Specifications subject to change without prior notice.

AMPLIFIER SECTION Output Power - Front 150 W RMS (10% THD, 1 kHz) / channel - Surround 150 W RMS (10% THD, 1 kHz) / channel - Center 150 W RMS (10% THD, 1 kHz) - Subwoofer 150 W RMS (10% THD, 100 Hz) Frequency Response 20 Hz 20 kHz / 3 dB Signal-to-Noise Ratio > 100 dB Input Sensitivity - AUX In, TV In 300 mV

TUNER SECTION FM Tuning Range 87.50 108.00 MHz AM Tuning Range - U.S.A and Canada

Models 530 1700 kHz - Australia Model 531 1602 kHz

DISC SECTION Laser Type Semiconductor Disc Diameter 12cm / 8cm Video Decoding MPEG-1 / MPEG-2

/ DivX 3.11, 4.x & 5.x Video DAC 12 Bits/108 MHz Signal System PAL / NTSC Video Format 4:3 / 16:9 Composite Video Output 1.0 Vp-p, 75 S-video Output Y - 1.0 Vp-p, 75

C - 0.3 Vp-p, 75 Audio DAC 24 Bits / 192 kHz Frequency Response 4 Hz 20 kHz (44.1 kHz)

4 Hz 22 kHz (48 kHz) 4 Hz 44 kHz (96 kHz)

PCM IEC 60958 Dolby Digital IEC 60958, IEC 61937 DTS IEC 60958, IEC 61937 Component Video Output Y - 1.0 Vp-p, 75

PB/CB PR/CR 0.7 Vp-p, 75 Audio S/N 105 dB Distortion 0.0035 % Dynamic Range 95 dB

AUDIO FORMAT Digital Dolby Digital/DTS/MPEG/Compressed Digital

PCM 16, 20, 24 bits fs 44.1, 48, 96 kHz

MP3 (ISO 9660) 24, 32, 56, 64, 96, 128, 256 kbps fs 16, 22.05, 24, 32, 44.1, 48 kHz

WMA 32 192 kbps, mono, stereo Full decoding of Dolby Digital and DTS multi-channel sound Analog Sound Stereo Dolby Surround Compatible Downmix from Dolby Digital multi-channel sound Dolby Pro Logic II

46

Language Codes / Codes de Langue

Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Avestan 6569 Aymara 6589 Azerbaijani 6590 Bashkir 6665 Basque 6985 Belarusian 6669 Bengali 6678 Bihari 6672 Bislama 6673 Bokml, Norwegian 7866 Bosnian 6683 Breton 6682 Bulgarian 6671 Burmese 7789 Castilian, Spanish 6983 Catalan 6765 Chamorro 6772 Chechen 6769 Chewa; Chichewa; Nyanja 7889 Chichewa; Chewa; Nyanja 7889 Chinese 9072 Chuang; Zhuang 9065 Church Slavic; Slavonic 6785 Church Slavonic; Church 6785 Chuvash 6786 Cornish 7587 Corsican 6779 Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 Dzongkha 6890 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079 Fijian 7074 Finnish 7073 French 7082 Frisian 7089 Gaelic; Scottish Gaelic 7168 Gallegan 7176 Georgian 7565 German 6869 Gikuyu; Kikuyu 7573 Greek 6976 Guarani 7178 Gujarati 7185 Hausa 7265 Hebrew 7269 Herero 7290 Hindi 7273 Hiri Motu 7279 Hungarian 7285 Icelandic 7383

These codes can be used to select other languages.This does not affect the options in AUDIO, SUBTITLE or DISC MENU.

Ido 7379 Indonesian 7368 Interlingua (International) 7365 Interlingue 7369 Inuktitut 7385 Inupiaq 7375 Irish 7165 Italian 7384 Japanese 7465 Javanese 7486 Kalaallisut 7576 Kannada 7578 Kashmiri 7583 Kazakh 7575 Khmer 7577 Kikuyu; Gikuyu 7573 Kinyarwanda 8287 Kirghiz 7589 Komi 7586 Korean 7579 Kuanyama; Kwanyama 7574 Kurdish 7585 Kwanyama; Kuanyama 7574 Lao 7679 Latin 7665 Latvian 7686 Letzeburgesch; 7666 Limburgan; Limburger 7673 Limburger; Limburgan 7673 Limburgish; Limburger 7673 Lingala 7678 Lithuanian 7684 Luxembourgish 7666 Macedonian 7775 Malagasy 7771 Malay 7783 Malayalam 7776 Maltese 7784 Manx 7186 Maori 7773 Marathi 7782 Marshallese 7772 Moldavian 7779 Mongolian 7778 Nauru 7865 Navaho, Navajo 7886 Navajo; Navaho 7886 Ndebele, North 7868 Ndebele, South 7882 Ndonga 7871 Nepali 7869 Northern Sami 8369 North Ndebele 7868 Norwegian 7879 Norwegian Bokml; Bokml 7866 Norwegian Nynorsk 7878 Nyanja; Chichewa; Chewa 7889 Nynorsk, Norwegian 7878 Occitan (post 1500); Proven 7967 Old Bulgarian; Old Slavonic 6785 Old Church Slavonic; Old 6785 Old Slavonic; Church 6785 Oriya 7982

Oromo 7977 Ossetian; Ossetic 7983 Ossetic; Ossetian 7983 Pali 8073 Panjabi 8065 Persian 7065 Polish 8076 Portuguese 8084 Provenal; Occitan (post) 7967 Pushto 8083 Quechua 8185 Raeto-Romance 8277 Romanian 8279 Rundi 8278 Russian 8285 Samoan 8377 Sango 8371 Sanskrit 8365 Sardinian 8367 Scottish Gaelic; Gaelic 7168 Serbian 8382 Shona 8378 Sindhi 8368 Sinhalese 8373 Slovak 8375 Slovenian 8376 Somali 8379 Sotho, Southem 8384 South Ndebele 7882 Spanish; Castilian 6983 Sundanese 8385 Swahili 8387 Swati 8383 Swedish 8386 Tagalog 8476 Tahitian 8489 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga (Tonga Islands) 8479 Tsonga 8483 Tswana 8478 Turkish 8482 Turkmen 8475 Twi 8487 Uighur 8571 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapk 8679 Walloon 8765 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 8973 Yoruba 8979 Zhuang; Chuang 9065 Zulu 9085

Ces pages permettent de choisir dautres langues. Ce rglage naffecte pas les options choisies avec AUDIO, S-TITRES ou MENU DISQUE.

47

F ran

ais

Remote Control Codes / Codes de Commande

TV Yamaha 1009, 1011, 1036, 1068 Admiral 1033, 1080 Aiko 1032 Akai 1011 Alba 1005, 1013, 1014, 1064, 1076 AOC 1009, 1011 Audiovox 1032, 1053, 1079, 1083 Belcor 1009 Bell & Howell 1007, 1039 Blaupunkt 1055, 1056, 1059, 1082 Blue sky 1064 Bradford 1053 Brandt 1035, 1057, 1058 Brokwood 1009 Bush 1005, 1013, 1014, 1064, 1070, 1072,

1076, 1077 Candle 1011, 1021 Clatronic 1030, 1067, 1075 Contec 1053 Craig 1043, 1053 Croslex 1020 Crown 1016, 1053, 1078 Curtis Mathis 1007, 1011, 1016, 1017, 1018, 1020,

1021, 1022, CXC 1053 Daewoo 1009, 1016, 1023, 1032, 1039, 1079,

1083, 1084 Daytron 1009 Dual 1063 Dumont 1008, 1009 Emerson 1009, 1015, 1016, 1039, 1050, 1051,

1052, 1053, 1065, 1070,1080, 1083, 1084 Envision 1011 Ferguson 1004, 1014, 1028, 1035, 1054, 1066,

1071 First line 1005, 1062, 1063, 1067, 1072, 1074 Fisher 1039 Funai 1048, 1052, 1053, 1069 Futuretec 1053 GE 1010, 1017, 1018, 1033, 1051, 1070,

1079, 1088, 1090 Gibralter 1008, 1009, 1011 LG/Goldstar 1002, 1003, 1009, 1011, 1014, 1016,

1021, 1052 Goodmans 1013, 1014, 1027, 1063, 1076, 1077 Grundig 1026, 1055, 1056, 1082 Harvard 1024, 1053 Hitachi 1015, 1021, 1036 ICE 1063, 1069, 1076 Itt/Nokia 1044 JC Penny 1003, 1009, 1010, 1011, 1016, 1017,

1018, 1021, 1022, 1040, 1051, 1090 JVC (Victor) 1013, 1019, 1025, 1042 Kendo 1014 Kenwood 1009, 1011 KTV 1011, 1016, 1053 Loewe 1029 Magnavox 1011, 1013, 1020, 1052 Marantz 1011, 1014, 1020 Matsui 1005, 1012, 1013, 1014, 1027, 1060,

1063, 1072, 1076 MGA 1009, 1011, 1037, 1049 Mitsubishi 1009, 1033, 1034, 1038, 1081 MTC 1009, 1011, 1021, 1022, 1062, 1081 Multitec 1053 NEC 1009, 1011, 1013, 1021, 1047 Nikko 1011, 1032, 1051 Nokia 1044 Nordmende 1035, 1057, 1058, 1071 NTC 1062 Oceanic 1044, 1061 Onwa 1053 Panasonic 1018, 1043, 1068, 1086 Philco 1009, 1011, 1020, 1036, 1080 Philips 1014, 1020 Pilot 1009, 1011, 1016 Pioneer 1015, 1046, 1049, 1085, 1086 Portland 1009, 1016, 1032 Quasar 1018, 1045, 1068 Radio Shack 1009, 1011, 1016, 1017, 1021, 1038,

1044, 1049, 1051 RCA 1009, 1015, 1017, 1018, 1031, 1033,

1087, 1088, 1089, 1090, 1091

Realistic 1009, 1011, 1016, 1021, 1039, 1045, 1051, 1053

SABA 1029, 1035, 1044, 1057, 1058, 1071 Sampo 1011, 1016 Samsung 1009, 1011, 1014, 1021, 1022, 1031,

1051 Sanyo 1039, 1060, 1079 Schneider 1014, 1064, 1067, 1073, 1076 Scott 1009, 1051, 1052, 1053, 1065 Sharp 1016, 1033, 1045 Shogun 1009 Siemens 1014, 1041, 1055, 1056, 1059, 1082 Signature 1007 Sony 1001, 1006 Soundesign 1051, 1052, 1053 Starlite 1053 Sylvania 1011, 1020 Telefunken 1021 Thomson 1035, 1057, 1058, 1071 Toshiba 1012, 1013, 1022, 1039, 1040 Videch 1009, 1013, 1051 Wards 1007, 1009, 1010, 1011, 1020, 1021,

1045, 1051, 1052

CABLE ABC 3002, 3003, 3004, 3006, 3008 Andover 3037 Bell & Howell 3006 Birgmingham Cable Communication 3020 British Telecom 3002, 3012 Cabletime 3016, 3019, 3025, 3029 Contec 3009 Clyde 3011 Cryptovision 3038 Daehan 3043 Daeryung 3003 Decsat 3027 Everquesst 3007 Filmnet 3028 France Telecom 3030 GEC 3011 Gemini 3007 General Instrument 3004, 3020, 3031, 3046 Goldstar 3014, 3047 Grundig 3035 Hamlin 3052, 3067, 3050, 3057, 3068 Hitachi 3004 Jasco 3007 Jerrold 3002, 3004, 3005, 3006, 3007, 3020,

3031, 3046 LG Alps 3044 Magnavox 3055, 3071 Memorex 3001 Mnet 3009, 3028 Motorola 3074, 3075, 3076 3077, 3078, 3079,

3080, 3081, 3082, 3083, 3084, 3085, 3086, 3087, 3088, 3089, 3090, 3091

Now 3041 Oak 3009 Pacific 3039 Panasonic 3001, 3013 Paragon 3001 Philips 3061, 3054, 3055, 3056, 3065, 3069,

3071 Pulsar 3001 Pioneer 3010, 3014, 3018, 3036 PVP Stereo Visual Matrix 3002 Quasar 3001 Radio Shack 3051, 3070 3072 3073 Rembrandt 3004 Runco 3001 Salora 3026 Samsung 3014, 3040 Satbox 3024 Scientific 3003, 3032, 3049 Scientific Atlanta 3003, 3008, 3021 Seawoo 3045 Signal 3007 Signature 3004 Starcom 3002, 3007 Stargate 3007 Starquest 3007

48

Remote Control Codes / Codes de Commande STS 3015 Taihan 3043 Teleservice 3022 Tele+1 3028 Tudi 3023 Tusa 3007 Tocom 3005 Tongkook 3042, 3048 Toshiba 3001 United Cable 3002 Universal 3061, 3053, 3060, 3062, 3063 Videoway 3017 Viewstar 3059, 3055, 3058, 3064, 3066 Visicable+ 3033 Westminster 3012 Wolsey Gene 3037 Zenith 3001, 3034

SATELLITE TUNER Absat 4006 AST 4027 Alba 4029, 4034, 4037, 4052 Aldes 4019 Amstrad 4003, 4016, 4025, 4038, 4039, 4042 Ankard 4013, 4019, 4030, 4044 Anttron 4009, 4034 Armstrong 4015 Astra 4005 Astro 4008, 4039, 4045 Avalon 4031 Axis 4030, 4046 Beko 4010 Best 4030 Blaupunkt 4008 Boca 4015, 4043 Brain Wave 4022 British Sky Broadcasting 4058 BT 4053 Bush 4002 CNT 4045 Cambridge 4024 Canal Satellite 4059 Canal+ 4059 Channel Master 4029 Comlink 4019 Connexions 4031 Crown 4015 Cyrus 4011 D-Box 4054 DDC 4029 DNT 4011, 4031 Echostar 4031, 4036, 4061 Emanon 4034 Ferguson 4002, 4009, 4010, 4023 Fidelity 4016 Finlux 4005, 4024, 4032, 4037 Fracarro 4061 Freecom 4034 Fujitsu 4094 4012 FTE Humax 4060 Fube 4030, 4031, 4034 G-sat 4009 Galaxis 4019, 4057, 4060 General Instrument 4085, 4080, 4069, 4082, 4083, 4092 Gold Box 4059 Gooding 4048 Goodmans 4010 Grundig 4008, 4010, 4048 Hinari 4009 Hirschimann 4008, 4032, 4039, 4040, 4049 Hitachi 4037 Houston 4053 Hughes 4088 Huth 4013, 4015, 4019, 4026 ITT 4005 Invideo 4061 Intervision 4050 Johansson 4022 JVC 4048 Kathrein 4004, 4006, 4008, 4011, 4035, 4041 Kreiselmeyer 4008 Kyostar 4034 La Sat 4043, 4045

Lenco 4034 Lennox 4050 Lupus 4030 Luxor 4005, 4049 Magnavox 4087 Manhattan 4037, 4045, 4050 Marantz 4011 Maspro 4004, 4023 Matsui 4024, 4048 Mediasat 4059 Mediamarkt 4015 Minerva 4048 Morgans 4015, 4043 Navex 4022 Neuhaus 4039 Neusat 4057 Newhaus 4013 Nikko 4028 Nokia 4005, 4032, 4037, 4049, 4054, 4063 Nordmende 4029 Orbitech 4039 Oxford 4024 Pace 4002, 4009, 4014, 4023, 4037, 4055,

4058 Palladium 4048 Palsat 4039 Panda 4037 Panasonic 4086, 4077 Philips 4007, 4011, 4020, 4037, 4048, 4059 Phonotrend 4019, 4050 Pioneer 4021, 4059 Planet 4061 Promax 4037 Prosat 4019 Quadral 4029, 4044 Radio shack 4083 Radiola 4011 Radix 4031, 4064 RCA 4084, 4076, 4090 RFT 4011, 4013, 4019 Saba 4023, 4045 Sabre 4037 Sagem 4056 Salora 4005 Samsung 4066, 4067, 4068 SAT 4027, 4038 Satcom 4026, 4051 Satec 4009 Satmaster 4026 Satpartner 4022, 4034, 4040, 4045 Schwaiger 4009, 4041 Seemann 4031, 4046 SEG 4030, 4034 Siemens 4008 Skymaster 4019, 4044, 4051 Sony 4017, 4018 Strong 4062 Sunstar 4043 Tantec 4023, 4037 Technisat 4001, 4039 Techniland 4026 Telefunken 4034 Teleka 4015, 4052 Telesat 4051 Thomson 4037, 4059 Tonna 4026, 4053 Toshiba 4089, 4071, 4075 TPS 4056 Triad 4027 Triasat 4040 Uniden 4093 4070, 4073, 4074, 4078, 4079,

4081, 4083 Unitor 4022 Universum 4008, 4049 Ventana 4011 Vortec 4034 Vtech 4027 Winersat 4022 Wisi 4008, 4027, 4031, 4037 Xsat 4006, 4065 Xcom Multimedia 4065 Zehnder 4033, 4045, 4047 Zenith 4071, 4072, 4091

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VSTRA FRLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in China 3139 246 14711

DVD HOME THEATER SOUND SYSTEM SYSTEME HOME CINEMA DVD

OWNERS MANUAL MODE DEMPLOI

UCA

DVX-C300 (DVR-C300+NX-SW300+NX-F300+NX-C300 +NX-S300)

DVX-C300SW (D

Manualsnet FAQs

If you want to find out how the DVX-C300 Yamaha works, you can view and download the Yamaha DVX-C300 Theater System Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha DVX-C300 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha DVX-C300. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha DVX-C300 Theater System Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha DVX-C300 Theater System Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha DVX-C300 Theater System Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha DVX-C300 Theater System Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha DVX-C300 Theater System Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.