Contents

Yamaha DVR-S60 Theater System Owner's Manual PDF

1 of 31
1 of 31

Summary of Content for Yamaha DVR-S60 Theater System Owner's Manual PDF

DVD HOME THEATER SOUND SYSTEM

DVX-S60

DVX-S60: DVR-S60 + NX-S60S + NX-S60C + SW-S60

U

PHONES

STANDBY/ON

FM MODE

TUNING

SURROUND BASS MUSIC INPUT

PRESET MEMORY VOLUME

OWNERS MANUAL

A1-60U-1 02.8.8, 3:37 PM1

2II

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

1 Read Instructions All the safety and operating instructions should be read before the product is operated.

2 Retain Instructions The safety and operating instructions should be retained for future reference.

3 Heed Warnings All warnings on the product and in the operating instructions should be adhered to.

4 Follow Instructions All operating and use instructions should be followed.

5 Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7 Water and Moisture Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8 Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer.

9 A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to.

11 Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12 Grounding or Polarization This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13 Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14 Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16 Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18 Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this

indicates a need for service.

20 Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

21 Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

IMPORTANT SAFETY INSTRUCTIONS

A2-60U-2 (02.6.4)a 02.8.8, 3:37 PM2

3

23 Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

24 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 81020)

GROUNDING CONDUCTORS (NEC SECTION 81021)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

ELECTRIC SERVICE EQUIPMENT

NEC NATIONAL ELECTRICAL CODE

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (for US customers)

Note to CATV system installer:

This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.

We Want You Listening For A Lifetime

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Associations Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

III

A2-60U-2 (02.6.4)a 02.8.8, 3:37 PM3

4

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.

IV

Speaker cables

Mounting brackets (for NX-S60S)

Screws (for NX-S60S)

Fasteners (for NX-S60C)

Nonskid pads (for NX-S60S)

Remote control

Batteries (size AA, UM/SUM-3, R6, HP-7)

Audio pin cable

Video pin calbe

AM loop antenna

Indoor FM antenna

X 2

[5m] [15m]

X 4 X 2

X 4

X 4

DVR-S60 NX-SW60 (NX-S60S x 4, NX-S60C, SW-S60)

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

CHECKING THE ACCESSORIES Check your package to make sure it contains the following items.

X 2

(U.S.A., Canada, Australia, China, Korean and General models)

(U.K. and Europe models)

A2-60U-2 (02.6.4)a 02.8.8, 3:38 PM4

E-1

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2 Do not install this equipment in a confined space, such as a book case or built in cabinet.

3 Locate this system away from other electrical appliances, motors, or transformers to avoid humming sounds. To prevent fire or electrical shock, do not place this system where it may get exposed to dripping or splashing, and never put any objects filled with liquids, such as vases, on the top of the system.

4 Do not expose this system to sudden temperature changes from cold to hot, and do not locate this system in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this system, which may cause an electrical shock, fire, damage to this system, and/or personal injury.

5 Avoid installing this system in a place where foreign objects and liquid might fall. It might cause a fire, damage to this system and/or personal injury. Do not place the following objects on this system: Other components, as they may cause damage and/or

discoloration on the surface of this system. Burning objects (i.e. candles), as they may cause fire, damage to

this system, and/or personal injury. Containers with liquid in them, as they may cause electrical

shock to the user and/or damage to this system. 6 Do not cover this system with a newspaper, tablecloth, curtain, etc.

in order not to obstruct heat radiation. If the temperature inside this system rises, it may cause fire, damage to this system, and/or personal injury.

7 Do not plug in this system to a wall outlet until all connections are complete.

8 Do not operate this system upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cables. 10 When disconnecting the power cable from the wall outlet, grasp the

plug; do not pull the cable. 11 Do not clean this system with chemical solvents; this might damage

the finish. Use a clean, dry cloth. 12 Only voltage specified on this system must be used. Using this

system with a higher voltage than specified is dangerous and may cause fire, damage to this system, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this system with a voltage other than specified.

13 To prevent damage by lightning, disconnect the power cable from the wall outlet during an electrical storm.

14 Take care of this system so that no foreign objects and/or liquid drops inside this system.

15 Do not attempt to modify or fix this system. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

16 When not planning to use this system for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

17 Be sure to read the TROUBLESHOOTING GUIDE section on common operating errors before concluding that this system is faulty.

18 Before moving this system, press STANDBY/ON to set this system in the standby mode, and disconnect the AC power plug from the wall outlet.

19 VOLTAGE SELECTOR (General model only) The VOLTAGE SELECTOR on the rear panel of DVR-S60 must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110120V/220240V AC, 50/60 Hz.

This system is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this system itself is turned off. This state is called the standby mode. In this state, this system is designed to consume a very small quantity of power.

IMPORTANT Please record the serial number of DVR-S60 in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of DVR-S60. Retain this Owners Manual in a safe place for future reference.

FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.

For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.

Note The plug severed from the mains lead must be destroyed, as a plug

with bared flexible cord is hazardous if engaged in a live socket outlet.

Special Instructions for U.K. Model

IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.

DANGER Visible laser radiation when open. Avoid direct exposure to beam. When this system is plugged to the wall outlet, do not place your eyes close to the opening of the disc tray and other openings to look into inside.

The laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM.

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM1

E-2

IMPORTANT SAFETY INSTRUCTIONS....................... II

CHECKING THE ACCESSORIES ............................... IV

CAUTION ....................................................................... 1

CONTROLS ................................................................... 3 Front panel ......................................................................... 3 Display ................................................................................ 3

REMOTE CONTROL ..................................................... 4 Controls .............................................................................. 4 Installing batteries in the remote control ............................. 5 Using the remote control .................................................... 5

SPEAKER PLACEMENT ............................................... 6 Placing the speakers .......................................................... 6 Placing the center speaker ................................................. 6 Mounting the front and surround speakers ......................... 7

BASIC CONNECTIONS ................................................. 8 Speaker connections .......................................................... 8 Antenna connections .......................................................... 9 Connecting to a TV with the video pin cable ...................... 9

ADDITIONAL CONNECTION EXAMPLES .................. 10 Connecting to a TV with an S video cable ........................ 10 Connecting to a TV with a component video cable .......... 10 VCR connections .............................................................. 10 Progressive-scan TV connections .................................... 11 Headphones ..................................................................... 11

BASIC OPERATION..................................................... 12 Turning the power on and off ............................................ 12 Direct start function .......................................................... 12 Selecting the source ......................................................... 12 Adjusting the volume ........................................................ 12 To reduce the volume temporarily .................................... 12 Bass extension ................................................................. 12 Selecting the sound mode ................................................ 12 What to do if ... ................................................................. 12

ADJUSTING THE CLOCK ........................................... 12

SELECTING THE SURROUND MODE ....................... 13 Selecting Dolby Pro Logic mode ...................................... 13

PLAYABLE DISCS ....................................................... 14

DISC PLAY ................................................................... 15 Preparations ..................................................................... 15 Loading a disc .................................................................. 15 Starting play ..................................................................... 15 Stopping play .................................................................... 15

SETTINGS ON THE SET UP MENU ........................... 16 Common procedures of settings ...................................... 16

Language .................................................................... 16 Display ........................................................................ 16 Speaker ....................................................................... 17 Parental ....................................................................... 17

VARIOUS DISC PLAYING FUNCTIONS ..................... 18 Selecting a DVD menu [DVD] ........................................... 18 Selecting a title menu [DVD] ............................................. 18 Return button (RETURN) [Video CD] ............................... 18 Chapter (Track) skip ......................................................... 18 Title search [DVD]............................................................. 18 Chapter search [DVD] ...................................................... 18 Track search [Video CD] [CD] ........................................... 18 Time search ...................................................................... 18 Fast play ........................................................................... 18 Slow-motion play .............................................................. 18 Still picture (Pause) .......................................................... 18 Frame by frame advance play [DVD] [Video CD] ................ 18 Picture zoom [DVD] [Video CD] ........................................ 19 Viewing from a desired camera angle (Multi-Angle) [DVD] .......................................................... 19 Angle replay [DVD] ........................................................... 19 Repeat play ...................................................................... 19 Programmed play [Video CD] [CD] ................................... 19 Selecting subtitle language [DVD] .................................... 20 Selecting audio soundtrack language (Multi-Language) [DVD] .................................................... 20 Changing the audio channel output [Video CD] .............. 20 Selecting on-screen information ....................................... 20

MP3 CD OPERATION .................................................. 21 MP3 CD information ......................................................... 21 MP3 CD play .................................................................... 21

LANGUAGE CODE LIST ............................................. 22

LISTENING TO VIDEO SOURCES .............................. 23

LISTENING TO THE RADIO ........................................ 23 Automatic/Manual tuning .................................................. 23 To preset stations ............................................................. 23 Listening to preset stations ............................................... 23 To receive FM stereo broadcasts ..................................... 23

TIMER OPERATION .................................................... 24 Using the timer ................................................................. 24 Using the sleep timer ........................................................ 24

TROUBLESHOOTING GUIDE ..................................... 25

SPECIFICATIONS........................................................ 26

CONTENTS

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM2

E-3

1. STANDBY/ON button, Standby indicator 2. Disc tray 3. f/TUNING button, e/TUNING + button 4. Open/Close button (q) 5. Play button ( ) 6. FM MODE button [see page 23.]/Pause button (k) 7. Stop button (n) 8. d/PRESET button 9. VOLUME control

C TDOLBY DIGITAL

DOLBY PL DTS

ST MONO

kHz PROG. ALL 1

MHz REP.

SLEEP ON OFF

1 2 5 6

8 9

151618 10 111417

1213

7

3 4

CONTROLS

Display

11. Kilohertz indicator (kHz) 12. Megahertz indicator (MHz) 13. Chapter indicator (C) 14. Pause indicator (k) 15. FM mono indicator (MONO) [see page 23.] 16. FM stereo indicator (ST) [see page 23.] 17. Play indicator ( ) 18. Dolby Digital indicator (DOLBY DIGITAL)

1. Dolby Pro Logic indicator (DOLBY PL) 2. DTS indicator (DTS) 3. Title and Track indicator (T) 4. Message or number indicators

(Title, chapter, track, playing time or other information) 5. Program indicator (PROG.) [see page 19, 23.] 6. Repeat mode indicators (ALL, 1, REP.) [see page 19.] 7. Timer indicator (0) [see page 24.] 8. Timer off indicator (OFF) [see page 24.] 9. Timer on indicator (ON) [see page 24.] 10. Sleep indicator (SLEEP) [see page 24.]

10. c/MEMORY button 11. INPUT button 12. MUSIC button [see page 12.] 13. BASS button [see page 12.] 14. SURROUND button [see page 13.] 15. Remote control sensor 16. Display 17. PHONES jack

PHONES

STANDBY/ON

FM MODE

TUNING

SURROUND BASS MUSIC INPUT

PRESET MEMORY VOLUME

1 2 3 84 5 6 7 9

1011121314151617

Front panel

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM3

E-4

REMOTE CONTROL

6. Open/Close (q) button 7. SET/CLEAR button [see page 24.]/

CANCEL button [see page 18, 19.] 8. LEVEL button [see page 13.] 9. MENU button [see page 18.] 10. ENTER button 11. RETURN button [see page 18.] 12. Play button ( ) 13. Stop button (n) 14. SKIP f/ e buttons 15. AUDIO button [see page 20.] 16. SUBTITLE button [see page 20.] 17. REPEAT button [see page 19.] 18. Last memory button (LAST MEMO) [see page 15.] 19. PROGRAM button [see page 19.] 20. SEARCH MODE button [see page 18.] 21. SLOW / buttons [see page 18.] 22. SEARCH d/ c buttons 23. Pause button (k) 24. ON SCREEN button [see page 20.] 25. 4, a, 5, b buttons 26. TITLE button [see page 18.] 27. SET UP button [see page 16.]

1 2 3 4

5 6 7 8

9 0 10 CANCEL

SET UP

ANGLE REPLAY ZOOM

SLEEP TIMER ADJUST

CLOCK

FM MODE

BASS TEST LEVEL TUNER

MUTE SURROUND MUSIC

VOLUME

TITLE

ON SCREEN

SEARCH

SEARCH MODE PROGRAM LAST MEMO REPEAT

SLOW AUDIOSUBTITLE

SKIP

RETURN

ENTER

MENU

INPUT

TUNING PRESET

SET/CLEAR

SHIFT

POWER

5

4

1

2

3

1 2 3 4

5 6 7 8

9 0 10 CANCEL

SET UP

ANGLE REPLAY ZOOM

SLEEP TIMER ADJUST

CLOCK

FM MODE

BASS TEST LEVEL TUNER

MUTE SURROUND MUSIC

VOLUME

TITLE

ON SCREEN

SEARCH

SEARCH MODE PROGRAM LAST MEMO REPEAT

SLOW AUDIOSUBTITLE

SKIP

RETURN

ENTER

MENU

INPUT

TUNING PRESET

SET/CLEAR

SHIFT

POWER

27

26

25

6

7

8

9

24

23

20

22

11

13

15 14 16

17 18

10

12

21 19

Note: In this instruction manual, any operation of pressing a button while pressing the SHIFT button is described as follows.

Example: Press SHIFT + 2 ANGLE buttons.

Controls

1. POWER button (z/I) 2. Number and other function buttons

Number buttons (19, 0, 10) ANGLE button [see page 19.] ANGLEREPLAY button [see page 19.] ZOOM button [see page 19.] SLEEP button [see page 24.] TIMER button [see page 24.] ADJUST button [see page 12.] CLOCK button [see page 12.]

3. Amplifier controls INPUT button TEST tone [see page 13.] SURROUND button [see page 13.] BASS button [see page 12.] MUSIC button [see page 12.] MUTE button [see page 12.] VOLUME /+ buttons

4. Tuner controls TUNER button (Tuner/Band select button) PRESET button (Preset tuning button)

[see page 23.] TUNING /+ buttons [see page 23.] FM MODE button [see page 23.]

5. SHIFT button

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM4

E-5

Using the remote control

Handling the remote control Do not spill water or other liquids on the remote control. Do not drop the remote control. Do not leave or store the remote control in the following types of

conditions: high humidity or temperature such as near a heater, stove or bath; dusty places; or in places subject to extremely low temperatures.

Installing batteries in the remote control Insert the batteries in the correct direction by aligning the + and marks on the batteries with the polarity markings (+ and ) inside the battery compartment.

1. Press the tab on the battery compartment cover in the direction of the arrow and remove the cover.

2. Insert the two batteries (AA, R06, UM-3 type) with + and oriented properly.

3. Attach the cover so that it snaps into place.

Notes on batteries Change all of the batteries if you notice a decrease in the operating

range of the remote control. Do not use old batteries together with new ones. Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

1

3

2

PHONES

STANDBY/ON

FM MODE

TUNING

SURROUND BASS MUSIC INPUT

PRESET MEMORY VOLUME

Approximately 6 m (20 feet)

30 30

Press the tab.

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM5

E-6

SPEAKER PLACEMENT Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below.

Note: - In this speaker package, the same speakers (NX-S60S) are used for the front and surround speakers. - Although the speaker system in this system is magnetically shielded, it may still affect the color on the television monitor when using this system

near the television. Adjust the relative positions of this system and the television if this happens.

Placing the speakers Front speakers: On both sides of and at approximately

the same height as the TV set.

Surround speakers: Behind your listening position, facing slightly inward. About 1.8 m (approx. 6 feet) from the floor.

Center speaker: Precisely between the front speakers.

Subwoofer: The position of the subwoofer is not so critical because low bass tones are not highly directional.

QD-Bass Technology QD-Bass (Quatre Dispersion Bass) technology uses square, pyramid-shaped reflective plates to radiate the sound in four horizontal directions.

Caution for carrying the subwoofer Do not insert your hands into the openings at the lower part of the subwoofer when carrying it. If you touch the inside speaker unit, it may be damaged. Remove the warning label put by the factory setting when using the subwoofer.

Surround right speaker

Surround left speaker

Subwoofer

Front right speaker

Front left speaker

Center speaker

Placing the center speaker You can place the speaker on top of the TV if the top is flat, on the floor under the TV, or inside the TV rack . Be sure to place the speaker in a stable position. When placing the speaker on top of the TV, to prevent the speaker from falling, attach the provided fasteners at two points on the bottom of the speaker and on the top of the TV.

Note: - Do not place the speaker on top of a TV whose area is smaller than

the bottom of the speaker. If placed, the speaker may fall and cause injury.

- Do not place the speaker on top of a TV if the top is inclined. - Do not touch the adhesive surface after peeling off the seal as this

will weaken its adhesive strength. - Thoroughly wipe clean the surface where the fastener is to be

applied. Note that adhesive strength is weakened if the surface is dirty, oily or wet and that this may cause the center speaker to drop.

Peel off the seal

Fastener

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM6

E-7

Mounting the front and surround speakers Mount the speakers on a shelf, rack or directly on the floor, or hang them on the wall.

To mount the speakers on a wall by using the holes on the speakers back panels

1. Fasten screws into a firm wall or wall support as shown in the figure.

2. Hang the speaker by mounting the holes on the protruding screws. * Make sure that the screws are securely caught by the narrow parts

of the holes.

WARNING Each speaker weighs 0.9 kg (2 lbs.). Do not mount them on thin

plywood or a wall composed of a soft surface material. If mounted, the screws may pull out of the flimsy surface and the speakers may fall. This may damage the speakers or cause personal injury.

Do not affix the speakers to a wall using nails, adhesives, or any other unstable hardware. Long-term use and vibrations may cause the speakers to fall.

To avoid accidents resulting from tripping over loose speaker cables, fix the cables to the wall.

Select an appropriate position on the wall to mount the speaker so that no one will injure his/her head or face.

Using the Yamaha Speaker Stand SPS-80 (option) By using the Yamaha Speaker Stand SPS-80, speakers can be placed on the floor.

* The SPS-80 is not available in some areas.

Wall/ wall support

Min. 20 mm

Diam. 3.54 mm

10 mm

70 mm70 mm

70 mm

Round head screw (not supplied)

SPS-80

Placing the the front/surround speakers When placing the speakers on a flat surface, attach the included nonskid pads to the corners on the bottom of the speakers. This prevents the speakers from sliding around.

If you want to mount a speaker on a commercially available speaker stand for the front/surround speakers The provided mounting bracket with 1 pair of screw holes (at an interval of 60 mm) can be used to mount the speaker on a speaker stand. * Those screw holes can be used with M4 screws only.

1. Attach the bracket to the bottom of the speaker by using the provided screw so that the convex part of the bracket fits in the grooved part on the bottom of the speaker.

2. Mount the speaker on the speaker stand by using the screw holes on the bracket.

Note: The mounting bracket is provided for each speaker.

Note: - Be careful not to let the speaker system fall, it might cause damage

or serious injuries. - If you use another speaker system, please change the settings of

Speaker under SETTINGS ON THE SET UP MENU to the proper settings for the speaker system. (See Page 17.)

Mounting bracket

Screw

Nonskid pads

60 mm

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM7

E-8

Speaker connections Be sure all connections are made correctly, that is to say, L (left) to L, R (right) to R, + to + and to .

Label of the Color tube Use speaker cable

FRONT R Red Front right speaker FRONT L White Front left speaker CENTER Green Center speaker REAR R Gray Surround right speaker REAR L Blue Surround left speaker SUBWOOFER Purple Subwoofer

BASIC CONNECTIONS

Selecting TV system (for General model only) Before connecting, set the TV SYSTEM switch (rear of the unit) to the position of your local TV system (PAL or NTSC).

After all connections have been made, connect the power cable to an AC outlet.

Note: - Do not connect the power cable to an AC outlet until all connections

have been made. - The system is not completely disconnected from the AC outlet when

the STANDBY/ON button is set to the standby mode.

VIDEOS-VIDEO (DVD ONLY)

MONITOR OUT

LR LR

SPEAKERS

8

CENTERFRONT SUB

WOOFER REAR

SURROUND

VIDEO 1 VIDEO 2

VIDEO

AUDIO

IN OUT

IN

IN

INOUT

L

R

L

R

VIDEO OUT SELECT (DVD ONLY)

VIDEO OUT SCAN SELECT

S-VIDEOCOMPONENT

COMPONENT VIDEO OUT

480p/480i (DVD ONLY)

Y

PB

PR SELECTABLE INTERLACE

480p/480i 480i

(DVD ONLY)

FRONT R

FR O

N T

L

CENTER

REAR R REAR L SUBWOOFER

Front right speaker Front left speaker

Center speaker

Surround right speaker Surround left speaker Subwoofer

White Green

Gray

Purple

DVR-S60 (U.S.A. model)

Red

Black Red

Blue

Black Red Black Red

Black Red Black Red

Note: The label of the speaker is attached to each speaker cable. Connect

the speakers in accordance with the labels. Connect the color tube of the speaker cable to the plus (+) side of

each speaker. If the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

A cover is attached to the end of the speaker cable. Connect the speakers after removing the cover.

Red White Green

Gray Blue

Purple

Black Red

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM8

E-9

Antenna connections

In areas close to a transmitter the simple indoor antenna is sufficient to receive broadcasts. Extend the antenna wire as straight as possible and, while listening to the sound from the system, secure it in a position which yields minimal distortion and noise. In fringe areas or where reception is distorted or noisy, an external antenna (not supplied) should be connected instead of the simple indoor antenna. Consult your dealer.

DVR-S60TUNER

FM ANT

AM ANT

VIDEO 1

VIDEO

AUDIO

IN OUT

IN OUT

L

R

75

GND

FM ANT

AM ANT

75

GND

Indoor FM antenna

Outdoor FM antenna (not supplied)

AM loop antenna AM loop antenna Set up the loop antenna.

Unwind the antenna wires, then connect them to the AM ANT terminals. Place the loop antenna in a position which yields the best AM reception, or attach it to a wall or other surface.

Note: To minimize noise, the speakers, power cable and any other cable should not come close to the indoor or external antenna cable and AM loop antenna . Do not place the antenna cables close to the system.

Connecting to a TV with the video pin cable Connect the included or commercially available video pin cable between the MONITOR OUT VIDEO jack of the unit and the video input jack of the TV.

Notes on connections - Please refer to the instruction manuals for the components that you are connecting (TV, etc.). - When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect all of the equipments from the AC outlet

until all the connections have been made. - Do not connect the MONITOR OUT (S VIDEO/VIDEO) and COMPONENT VIDEO OUT jacks of the unit to a VCR directly. The playback

picture will be distorted because DVD discs are copy protected. - Please consult your local audio/video dealer for more details.

1 2

1

2

3

Screws (not supplied)

VIDEOS-VIDEO (DVD ONLY)

MONITOR OUT

LR LR

SPEAKERS

8

CENTERFRONT SUB

WOOFERSURROUND

TUNER

FM ANT

AM ANT

VIDEO 1 VIDEO 2

VIDEO

AUDIO

IN OUT

IN

IN

INOUT

L

R

L

R

75

GND

VIDEO OUT SELECT (DVD ONLY)

VIDEO OUT SCAN SELECT

S-VIDEOCOMPONENT

COMPONENT VIDEO OUT

480p/480i (DVD ONLY)

Y

PB

PR SELECTABLE INTERLACE

U.C (US.CA) MADE IN CHINA

R-AUDIO-L VIDEOAUDIO VIDEO INPUT

1480p/480i 480i

(DVD ONLY)

DVR-S60 (U.S.A. model)

TV

Video pin cable

DVR-S60 (U.S.A. model)

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM9

E-10

ADDITIONAL CONNECTION EXAMPLES

For connections, use the included or commercially available connection cables suitable for respective connections.

Connecting to a TV with an S video cable Please follow the steps below before turning on the power. 1. If your TV has an S video input jack, connect the unit as shown in the

figure. You can enjoy clearer picture playback. 2. Set the VIDEO OUT SELECT switch to S VIDEO.

Connecting to a TV with a component video cable Please follow the steps below before turning on the power. 1. If your TV has component video input jacks, connect the unit as

shown in the figure. You can enjoy high quality picture playback. 2. Set the VIDEO OUT SELECT switch to COMPONENT.

VCR connections With this connection, it is possible to watch and listen to videocassettes or other video equipment. Connect the 1st VCR as shown in figure 14. If using the 2nd VCR or other video equipment, connect it as shown in figure 56.

VIDEOS-VIDEO (DVD ONLY)

MONITOR OUT

LR LR

SPEAKERS

8

CENTERFRONT SUB

WOOFERSURROUND

L

R

VIDEO OUT SCAN SELECT

S-VIDEOCOMPONENT

COMPONENT VIDEO OUT

480p/480i (DVD ONLY)

Y

PB

PR SELECTABLE INTERLACE

U MAD

COMPONENT VIDEO INPUT

Y CB CR

480p/480i 480i

(DVD ONLY)

VIDEO OUT SELECT (DVD ONLY)

2

1

DVR-S60 (U.S.A. model)

DVR-S60 (U.S.A. model)

TV

VIDEOS-VIDEO (DVD ONLY)

MONITOR OUT

LR LR

SPEAKERS

8

CENTERFRONT SUB

WOOFERSURROUND

VIDEO OUT SCAN SELECT

SELECTABLE INTERLACE

U.C (U MADE IN

S-VIDEO IN 1

480p/480i 480i

(DVD ONLY)

S-VIDEOCOMPONENT

VIDEO OUT SELECT (DVD ONLY)

1

2

S Video cable

Component video cable

TV

VIDEOS-VIDEO (DVD ONLY)

MONITOR OUT

LR LR

SPEAKERS

8

CENTERFRONT SUB

WOOFERSURROUND

TUNER

FM ANT

AM ANT

VIDEO 1 VIDEO 2

VIDEO

AUDIO

IN OUT

IN

IN

INOUT

L

R

L

R

75

GND

VIDEO OUT SELECT (DVD ONLY)

VIDEO OUT SCAN SELECT

S-VIDEOCOMPONENT

COMPONENT VIDEO OUT

480p 480i (DVD ONLY)

Y

PB

PR SELECTABLE INTERLACE

VHF/UHF FROM ANT.

IN

OUT

TO TV

IN OUT

3 4

LIN E

1(A U

X 1)

VIDEO

CH.

L

R

L

R

AUDIO

VHF/UHF FROM ANT.

IN

OUT

TO TV

IN OUT

3 4

LIN E

1(A U

X 1)

VIDEO

CH.

L

R

L

R

AUDIO

1

2

3

4

5

6

VCR (1st) VCR (2nd)

DVR-S60 (U.S.A. model)

Video pin cable

Audio pin cable

Note: - The picture from the VCR may be distorted in some cases. - If you use the VCR, you must connect the video pin cable between the MONITOR OUT VIDEO jack of the unit and the video input jack of the TV.

There are no VCR video signals from the MONITOR OUT S VIDEO and COMPONENT VIDEO OUT jacks of the unit. -

Be sure to check and/or change the settings of the VIDEO OUT SELECT and VIDEO OUT SCAN SELECT switches before turning on this system. If the setting of either or both switches is changed during play, picture may be disturbed or disappear from the monitor. In such a case, turn this system off and then on again. Be sure to check and/or change the setting of the VIDEO OUT SELECT switch before turning on this system. If the setting of this switch is changed during play, picture may be disturbed or disappear from the monitor. In such a case, turn this system off and then on again.

Do not connect this system to a TV through a VCR. If you do so, the picture may not be played back properly due to the copyright protection technology incorporated in this system.

Video pin cable

Audio pin cable

Video pin cable

Audio pin cable

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM10

E-11

VIDEOS-VIDEO (DVD ONLY)

MONITOR OUT

LR LR

SPEAKERS

8

CENTERFRONT SUB

WOOFER

TUNER

FM ANT

AM ANT

VIDEO 1 VIDEO 2

VIDEO

AUDIO

IN OUT

IN

IN

INOUT

L

R

L

R

75

GND S-VIDEOCOMPONENT

COMPONENT VIDEO OUT

480p/480i (DVD ONLY)

Y

PB

PR

U.C (US.CA) MADE IN CHINA

COMPONENT VIDEO INPUT

Y CB/PB CR/PR

REAR SURROUND

VIDEO OUT SELECT (DVD ONLY)

VIDEO OUT SCAN SELECT

SELECTABLE INTERLACE

480p/480i 480i

(DVD ONLY)

2

3

1

+

Please follow the steps below before turning on the power. 1. Connect the component video cable (not supplied) between the

COMPONENT VIDEO OUT jacks of the unit and the COMPONENT VIDEO INPUT jacks of the TV.

2. Set the VIDEO OUT SELECT switch to the COMPONENT position.

3. Set the VIDEO OUT SCAN SELECT switch to the SELECTABLE position.

After all connections and settings on the rear panel are completed, turn on the power of this system and the TV, then make the following setting.

4. Select COMPONENT OUTPUT: PROGRESSIVE in Display on the SETTINGS ON THE SET UP MENU. (See page 16.)

Notes: Please refer to the instruction manual of your TV. When you connect the unit to your TV, be sure to turn off the power

and disconnect both units from the wall outlet until all the connections have been made.

After the above connections have been made, there are no video signals from the MONITOR OUT VIDEO and VIDEO 1 VIDEO OUT jacks.

Do not connect the unit to a VCR directly. The playback picture will be distorted because DVD video discs are copy protected.

Component video cable

Green

Red

Blue

TV with progressive-scan capability

Progressive-scan TV connections (for U.S.A., Canada and Korean models only)

To AC outlet

Your TV must be capable of handling progressive scanning and have component video input capability.

Progressive Scanning While interlaced scanning produces one frame of video in two fields, progressive scanning creates one frame in one field. Conventional interlaced scanning constitutes one second with 30 frames (60 fields), but progressive scanning constitutes it with 60 frames from scratch. Progressive scanning can reproduce sharper picture with high resolution for still image or other picture containing long texts or horizontal lines. This model has compliance with 480p (progressive) system.

Interlaced scanning

Progressive scanning

G re

en

R ed

B lu

e

Headphones Connect stereo headphones (not supplied) to the PHONES jack for monitoring or for private listening. The speakers are automatically disconnected when headphones are connected.

DVR-S60 (U.S.A. model)

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM11

E-12

BASIC OPERATION

Turning the power on and off Press the STANDBY/ON button. The STANDBY indicator goes out. (After connecting the power cable, when you press the STANDBY/ON button for the first time, the volume-reset feature automatically sets the initial volume level.) To turn the power off, press the STANDBY/ON button again. The STANDBY indicator lights up. - When the power cable is connected to the AC outlet, the unit can be

controlled from the remote control.

Direct start function If the following buttons are pressed when the unit is in the standby mode, the unit turns on automatically and the selected source is activated.

Main unit , q Remote control , TUNER, q

Selecting the source Press the INPUT button to select the desired source. Each time the button is pressed, the display changes as follows:

DVD v VIDEO 1 v VIDEO 2 v FM v AM v . . . - When the source selection is changed, disc play is automatically

stopped.

Adjusting the volume Turn the VOLUME control (or press the + or VOLUME button on the remote control). The volume level appears on the display (VOL 0 VOL 39, MAX).

To reduce the volume temporarily (using the remote control) Press the MUTE button. The MUTE indicator flashes on the front panel display. To restore the previous volume setting, press the MUTE button again.

Bass extension Press the BASS button to select the desired bass boost effect.

BASS OFF v BASS ON1 v BASS ON2 v BASS OFF . . .

Selecting the sound mode Press the MUSIC button to select the sound mode matching the source to be listened to.

POP: Pops, etc. CLASSIC: Classical music, etc. ROCK: Rock music, etc. JAZZ: Jazz, etc.

What to do if... If the operation of the unit or display is not normal, 1. Disconnect the power cable. 2. While pressing both BASS and MUSIC buttons on the main unit at the

same time, connect the power cable. RESET briefly appears on the display.

3. Resume operation.

ADJUSTING THE CLOCK (Using the remote control)

Example: To set PM 6:30 1. Press the STANDBY/ON button to turn the power on. 2. Press the SHIFT + 0 CLOCK buttons. AM 12:00 flashes. 3. Press the SHIFT + 8 ADJUST buttons.

The hour display flashes. 4. Press the TUNING or + button to set the hours.

5. Press the SHIFT + 8 ADJUST buttons.

The minute display flashes.

6. Press the TUNING or + button to set the minutes.

7. Press the SHIFT + 8 ADJUST buttons. The clock starts.

- The time can be set accurately by pressing the SHIFT + 8 ADJUST buttons when a time signal is heard.

To display the clock during operation Press the SHIFT + 0 CLOCK buttons. Press both buttons again to return to the original display.

Note: When the display flashes because of a power failure, reset the time.

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM12

E-13

SELECTING THE SURROUND MODE

Press the SURROUND button to select the surround mode. Each time the button is pressed, the surround mode changes as follows:

DOLBY PL v DOLBY 3 v DOLBY D v DTSv THEATER v HALL v SURR OFF v DOLBY PL . . .

Note: Some discs may restrict the selection.

DOLBY PL: Dolby Pro Logic mode When playing a program source encoded with Dolby Surround sound (video tape, laser disc, DVD, etc.) (Fig. A)

DOLBY 3: 3 channel mode Using only the Front left, Center, Front right and Subwoofer speakers (Fig. B)

DOLBY D: Dolby Digital 5.1 Channel mode When DVD disc encoded with Dolby Digital 5.1 Channel is played back, you can select DOLBY D. (Fig. A) Note: Center or Surround speakers do not sound with some discs. DTS: DTS Digital Surround mode When DVD disc encoded with DTS Digital Surround System (5.1ch) is played back, you can select DTS. (Fig. A) Note: Center or Surround speakers do not sound with some discs.

THEATER: Theater effect HALL: Hall effect When playing a program source which is not encoded with Dolby Surround or DTS sound (Fig. A)

SURR OFF: Normal stereo sound Using only the Front left, Front right and Subwoofer speakers (Fig. C)

Selecting Dolby Pro Logic mode If you play a program source encoded with Dolby Surround or DTS sound (video tape, laser disc, DVD etc.), follow the steps below. Please use the remote control at the listening position. 1. Press the + or VOLUME button to adjust the sound level from the

speakers. 2. Press the SURROUND button repeatedly until DOLBY PL appears. 3. Press the TEST button. TTONE appears and FL flashes.

The test tone will be heard from each speaker sequentially as follows:

TTONE FL (Front left speaker) C (Center speaker) FR (Front right speaker) RS (Surround right speaker) LS (Surround left speaker)

4. Press the + or VOLUME button until the test tone turns into a comfortable level.

If the test tone level is not the same from each speaker, you may need fine adjustment of the volume level. Please follow the steps as below. Note: If you make no operation, the original display returns after approximately a minute. 1) Press the TEST button to turn the test tone off. 2) Press the SURROUND button to select the desired surround mode. 3) Press the LEVEL button. FNTL 0 appears. 4) Press the ENTER button repeatedly to select the speaker.

Display (Speaker)

FNTL (Front left speaker) CENT (Center speaker) FNTR (Front right speaker) SURR (Surround right speaker) SURL (Surround left speaker) SUBW (Subwoofer)

5) Press the a or b button to adjust the volume level. (FNTL/FNTR: 0 to 10, CENT/SURR/SURL/SUBW: +10 to 10.)

6) Press the ENTER button. 7) Repeat step 4) to 6) for another speaker, if necessary. 8) Press the LEVEL button again to turn it off.

5. Press the TEST button to turn the test tone off. TTONE disappears. 6. Press the + or VOLUME button to adjust the volume.

Notes: - There is no Dolby Surround effect when monaural program material

is used. - When receiving weak FM broadcasts, switch the Dolby Pro Logic off.

The sound quality may improve. - When headphones are connected while any of the surround modes

are selected, the surround mode is switched off automatically. The SURROUND button does not function while headphones are connected.

- For other surround mode, please refer to Selecting Dolby Pro Logic mode as above.

- This adjustment can be set at each source individually.

Surround right speaker

Surround left speaker

Subwoofer

Front right speaker

Front left speaker

Center speaker

Fig. A

Fig. B

Surround right speaker

Surround left speaker

Subwoofer

Front right speaker

Front left speaker

Center speaker

Surround right speaker

Surround left speaker

Subwoofer

Front right speaker

Front left speaker

Center speaker

Fig. C

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM13

E-14

Region number Region number (Regional restriction code) is built-in to the DVD player and DVD discs. There is a region number on the rear of the unit. The same region number or region number ALL of DVD discs can be used on this unit.

DVD disc There are marks on some DVD disc package. Examples:

Multiple Languages

Multi-language subtitles

Multi-Angle

Multi-Aspect

Region number

PLAYABLE DISCS The following types of discs can be played on this unit.

3

2

3

LB16:9

2

Disc type and logo mark

DVD Video

Video CD

Music CD

Recorded content

Disc size

Audio +

Video

Audio

12 cm

8 cm

Maximum playing time

74 minutes

20 minutes

Approx. 4 hours (Single sided disc) Approx. 8 hours (Double sided disc)

Approx. 80 minutes (Single sided disc) Approx. 160 minutes (Double sided disc)

(Version 2.0)

12 cm

8 cm

Audio +

Video

74 minutes

20 minutes

12 cm

8 cm

DVD discs are divided into titles, and the titles are sub-divided into chapters.

Video CD/Music CD disc Video CD and Music CD discs are divided into tracks.

Note: - Only the above types of discs can be played on this unit.

DVD-Audio, DVD-ROM, DVD-RAM, CD-ROM, CDV, CD-G, DVD+RW, DVD-RW, SVCD, CVD, SACD, Divx Video Discs, Photo CD, etc. cannot be played. (Some DVD-R, DVD-RW and DVD+RW discs may be played.)

- This unit can play back CD-R/RW discs that have music data or MP3 files as well. However, some CD-R/RWs can not be played back depending on the recording conditions.

- A CD-R/RW that has no music data or non-MP3 files can not be played back.

- This unit is to be used exclusively with the PAL or NTSC color system. SECAM system discs cannot be used with this unit.

Notes on handling discs - Do not expose the disc to direct sunlight, high humidity or high

temperature for extended periods of time. - Discs should be returned to their cases after use. - Do not apply paper or write anything on the disc surface. - Handle a disc by its edge. Do not touch the recorded surface (glossy

side). - Fingerprints and dust should be carefully wiped off the recorded

surface of the disc with a soft cloth. Wipe in a straight motion from the center to the outside of the disc.

- Never use chemicals such as record cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean discs.

- Do not use a disc printed on its surface by a commercially available label printer.

Title 1

Chapter 1 Chapter 2

Title 2

Chapter 1 Chapter 2 Chapter 3

Track 1 Track 2 Track 3 Track 4 Track 5

Model

U.S.A. and Canada models

U.K. and Europe models

Australia model

General and Korean models

China model

Region number of this unit

Discs can be played

1 , ALL or a mark which includes the region number 1 .

2 , ALL or a mark which includes the region number 2 .

4 , ALL or a mark which includes the region number 4 .

3 , ALL or a mark which includes the region number 3 .

6 , ALL or a mark which includes the region number 6 .

1

2

4

3

6

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM14

E-15

DISC PLAY

Important note: - This DISC PLAY explains the basic instruction of the DVD

player section using the remote control unit. - Some DVD or Video CD discs have different functions that may not

be explained in this instruction manual. You may need extra instructions. In this case, please follow the instructions displayed on the TV screen or the jacket or case of the disc.

- may appear on the TV screen during operation. This icon means that the function is not available on the current disc.

Preparations - Press the STANDBY/ON button to turn on this unit. - Turn on the TV and select the channel for the DVD player.

Select the playback picture size suitable for the aspect ratio of the TV. (See Display under SETTINGS ON THE SET UP MENU on Page 16.)

- Select the desired language for the screen menus. (See OSD Language under SETTINGS ON THE SET UP MENU on Page 16.)

Note: - Do not touch the disc tray while it is moving. - Never place anything except a disc on the disc tray. Foreign objects

can damage the unit. - Do not apply excessive force to the disc tray. - Only one disc can be placed on the disc tray. - To open or close the disc tray, be sure to use the q button. Do not press

the disc tray with your hand.

When an operation button is pressed, that operation is displayed on the TV screen. The display turns off after several seconds.

If a disc is loaded, you can turn the unit on and begin play immediately by pressing the button.

Loading a disc 1. Press the q button. OPEN appears on the display and the disc tray

opens. 2. Place the disc with the label facing up on the disc tray.

3. Press the q button again to close the disc tray. - Some discs may start play automatically.

Starting play Press the button. The DVD function is selected and play starts automatically.

Example:

Note: - If NO DISC appears on the display, load the disc.

If the disc is loaded with the label side downward (and it is a single sided disc), or if a badly scratched disc is loaded, NO DISC (or NO PLAY) appears. If this occurs, load the disc correctly or replace the disc.

- The producing method of commercially available discs may differ with each disc. Though there may be a case that the sound becomes intermittent just after the playback of a disc starts, this is dependent on the disc and not a malfunction of this system.

If a menu appears on the TV screen... Press the 4, a, 5 or b button (or the number buttons), then press the ENTER button to select the desired menu. Playback of the selected menu will start. Note: For more details, please refer to the jacket or case of the disc.

Stopping play - Press the n button once.

When you press the button, play starts automatically from the point where you stopped. Note: Some discs may not resume play.

- Press the n button twice. The player stops completely. When you press the button, play starts from the beginning of the disc.

Continuing play from where you stopped watching (LAST MEMORY PLAY) [DVD] 1. During play, press the LAST MEMO button at the point from which you

want to resume play later. L.M.-STOP appears on the display. Play stops automatically.

2. Remove the disc or turn off the power. 3. Load the disc (and press the button), or turn on the power. Last

Memory Play? screen appears.

Last Memory Play? Yes No Clear The memory is released.

4. Press the 4 or 5 button to select Yes. 5. Press the ENTER button. Play resumes from the point where you

stopped. (If desired, press the LAST MEMO button again.) Note: - Points on up to 5 discs can be memorized. - The Last Memory Play mode may not work correctly with some discs.

What is PBC? PBC is an abbreviation for Playback Control that refers to control codes prerecorded on Video CDs. During playback of a Video CD with PBC, PBC appears on the display.

To lock the disc tray (Using the main unit) You can lock the disc tray to prevent misuse of young children. While the disc tray is opened, press the q button until LOCKED appears on the TV screen. - The q button will not function. To release this mode, press the q button until UNLOCKED appears.

C

ENTER

Remote control

12 cm disc 8 cm disc

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM15

E-16

SETTINGS ON THE SET UP MENU

Once the following settings have been completed, the unit can always be operated under the same conditions. The settings will be retained in the memory until they are changed, even if the power is turned off.

Common procedures of settings 1. Press the SET UP button in the stop mode. SET UP MENU appears on the TV screen.

2. Press the 4, a, 5 or b button, then press the ENTER button to select the menu. Please refer to the on-screen instructions. 3. Press the SET UP button to quit this menu.

OSD: ENGLISH AUDIO: DISC, ENGLISH, SPANISH, FRENCH, OTHERS SUBTITLE: DISC, ENGLISH, SPANISH, FRENCH, OTHERS DVD MENU: DISC, ENGLISH, SPANISH, FRENCH, OTHERS

(DISC: The first priority language recorded on the disc is used.)

Note: - You cannot switch audio sound track languages if there is only one

language recorded on the disc. - When you play a DVD disc, the player automatically displays the pre-

selected subtitle language if it is included on the disc. - If OTHERS is selected, enter the language code. (See LANGUAGE

CODE LIST on Page 22.)

Language

TV TYPE: 4:3 LB, 4:3 PS, 16:9 COMPONENT OUTPUT*: INTERLACE, PROGRESSIVE PROGRESSIVE MODE*: AUTO, VIDEO, FILM

*: For U.S.A., Canada and Korean models only

TV TYPE: Select the appropriate setting for your TV screen size.

4:3 LB (Letterbox): Select when a conventional TV set is connected. When the wide screen disc is played back, the black bands appear at the top and bottom of screen.

4:3 PS (Panscan): Select when a conventional TV set is connected. When the wide screen disc is played back, it displays pictures cropped to fill to your TV screen. The left and right edges are cut off.

16:9: Select when a wide screen TV set is connected. Played in FULL size. (Setting the wide screen TV to FULL mode is also necessary.)

Note: - The screen size may differ depending on the DVD video discs. - If you select 16:9 to get rid of the black bands on screen when wide

screen disc is played back, picture may be slightly distorted. - In some discs, even if 4:3 PS is selected, the black bands may remain

on the screen.

Display

COMPONENT OUTPUT (U.S.A., Canada and Korean models only): If you use a conventional TV and connect it to the COMPONENT VIDEO OUT jacks (see page 10), select INTERLACE. If you use a TV with progressive-scan capability and connect it to the COMPONENT VIDEO OUT jacks (see page 11), select PROGRESSIVE. Note: - If the VIDEO OUT SELECT and VIDEO OUT SCAN SELECT switches

are not correct position, you cannot select COMPONENT OUTPUT: PROGRESSIVE.

- If you select COMPONENT OUTPUT: PROGRESSIVE when using a conventional TV, the TV screen is disturbed. In this case, turn off the power, and then set the VIDEO OUT SCAN switch to the INTERLACE position.

PROGRESSIVE MODE (U.S.A., Canada and Korean models only): When COMPONENT OUTPUT: PROGRESSIVE is selected as above, select AUTO, VIDEO or FILM.

AUTO: It automatically selects the VIDEO (Video source) or FILM (Film source) according to the played disc. Normally, select this mode.

VIDEO (Video source): Major DVD-Video sources consist of video sources and film sources. Select when playing a DVD video disc recorded with a video source or TV program like drama, animation, etc. (30 frames per second, 60 fields).

FILM (Film source): Major DVD-Video sources consist of video sources and film sources. Select when playing a DVD video disc recorded with a movie film (24 frames per second).

Note: - Initial setting is AUTO. - If picture flickering occurs at AUTO mode, select VIDEO or FILM.

Language Display Speaker Parental

Cut off

Example:

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM16

E-17

Setting method

1 ENTER PASSWORD Enter a number in 4 digits, then press ENTER.

* Use the number buttons to enter 4-digit number.

2 To confirm, enter password again, then press ENTER.

* By following this step, the setting is finished.

Note If you enter a wrong password, the following message appears on the TV screen. Enter the correct password again.

Invalid password Enter a number in 4 digits, then press ENTER.

Setting the desired parental level

1 Enter the password you have set. 2 Press 5 or 4 button to select PARENTAL LEVEL. 3 Press a or b button to select the desired level. The selectable levels

are as follows.

PARENTAL LEVEL: OFF, 1, 2, 3, 4, 5, 6, 7, 8

To change the password

1 Enter the password you have set. 2 Press 5 or 4 button to select CHANGE PASSWORD.

CHANGE PASSWORD Enter a number in 4 digits, then press ENTER.

* Use the number buttons to enter 4-digit number.

To confirm, enter password again, then press ENTER.

* By following this step, the setting is finished.

Parental

x

Parental control MPAA (Motion Picture Association of America) Guideline is a rating system that provide advance cautionary information to parents about the content of movie programs.

The parental lock level is equivalent to the following MPAA Rating System. Level 7: NC-17 (No one 17 and under admitted) Level 6: R (Restricted) Level 4: PG13 (Parental guidance cautioned) Level 3: PG (Parental guidance suggested) Level 1: G (General audiences)

Some DVD discs contain a restriction level which enables parents to prevent playback of discs by children. This DVD player is equipped with a password designed to prevent children changing the level.

You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function. For example, when you select level 5, the DVD player will not play discs with the rating of 6, 7 or 8. The information will appear on the TV screen.

If you forget the password Enter 788444 to clear the current password. Enter a new password and set the parental lock level again.

Note: Some DVD discs may not respond to the parental lock settings. Make sure this function works with your DVD discs.

For improvement, on screen displays subject to change without notice.

x

D-RANGE CONTROL: OFF, ON FRONT SPEAKER: SMALL, LARGE CENTER SPEAKER: SMALL, LARGE SURROUND SPEAKER: SMALL, LARGE SUBWOOFER: YES, NO

Speaker

These are originally set suitable for the supplied speakers. However, you can also change the settings as you prefer. Make the settings as follows:

D-RANGE CONTROL (Dynamic range control): It limits a big sound. Select ON or OFF.

FRONT SPEAKER/CENTER SPEAKER/SURROUND SPEAKER: When using the supplied speakers, select SMALL.

SUBWOOFER: When using the supplied subwoofer, select YES. If not, select NO.

A3-60U-E (02.7.26)a 02.8.8, 3:38 PM17

E-18

VARIOUS DISC PLAYING FUNCTIONS

may appear on the TV screen during operation. This icon means that the function is not available on the current disc.

Selecting a DVD menu [DVD] 1. Press the MENU button. The main menu screen appears.

Note: Press the MENU button again to resume play.

2. Press the 4, a, 5 or b button (or the number buttons) to select the desired menu then press the ENTER button. The selected menu play starts.

Selecting a title menu [DVD] 1. Press the TITLE button. The title menu appears.

Note: Press the TITLE button again to resume play from the scene when the TITLE button was first pressed.

2. Press the 4, a, 5 or b button (or the number buttons) to select the desired title then press the ENTER button. The selected title play starts.

Note: Selecting a DVD or title menu operation may differ depending on the disc used and may not be possible on some discs.

Return button (RETURN) [Video CD] Normally, it returns to the previous menu when the RETURN button is pressed during play. Note: The operation differs according to the content of the Video CD.

Chapter (Track) skip

Skipping forward Press the e button during play to skip to the next chapter (or track). A chapter (or track) is skipped each time the button is pressed.

Skipping back Press the f button during play to skip back to the beginning of the chapter (or track) currently played. Press the button again immediately to skip back to the beginning of the previous chapter (or track).

Note: You can skip only through the chapters, not over the titles on the DVD disc.

Title search [DVD] 1. Press the SEARCH MODE button once during play or in the stop

mode. TITLE SEARCH... screen appears. 2. Press the number button(s) to enter the title number. Play starts from

the selected title. Example: To select No. 3, press 3. To select No. 10, press 10, then 0. To select No. 24, press 10, 10, then 4.

Chapter search [DVD] 1. Press the SEARCH MODE buttons twice during play. CHAPTER

SEARCH... screen appears. 2. Press the number button(s) to enter the chapter number. Play starts

from the selected chapter.

Track search [Video CD] [CD] Press the number button(s) during play or in the stop mode. Play starts from the selected track.

Time search [DVD] 1. Press the SEARCH MODE buttons three times during play. TIME

SEARCH... screen appears. 2. Press the number button(s) to enter the time.

Example: 20 minutes 5 seconds Press 2, 0, 0 then 5. 1 hour 4 minutes 35 seconds Press 1, 0, 4, 3 then 5. Note: - Do not use the 10 button. - If you made a mistake, press the CANCEL button.

3. Press the button. Play starts from the searched time.

[Video CD] [CD] 1. Press the SEARCH MODE buttons once during play. TIME

SEARCH... screen appears. 2. Press the number button(s) to enter the time. 3. Press the button. Play starts from the searched time in the track.

Note: - By repeating steps 13 in the stop mode, play starts at the searched

time in the disc.

Note on the search function - The search function of this system does not work during menu play of

a Video CD with playback control.

Fast play Press the SEARCH c or SEARCH d button repeatedly to select the fast speed forward or reverse play. [DVD] [Video CD]

FF1 c, FF2 c, FF3 c or FR1 d, FR2 d, FR3 d [CD]

FF1 c, FF2 c or FR1 d, FR2 d Press the button to return to normal play.

Slow-motion play [DVD]: Forward and reverse slow play Press the SLOW or SLOW button repeatedly to select the forward or reverse slow speed play.

SF1 , SF2 , SF3 or SR1 , SR2 , SR3 [Video CD]: Forward slow play Press the SLOW button repeatedly to select the forward slow speed play.

SF1 , SF2 , SF3

Press the button to return to normal play.

Note: The sound is muted during fast play or slow-motion play of a DVD and Video CD.

Still picture (Pause) [DVD] [Video CD]: Still picture mode, [CD]: Pause mode Press the k button during play. Press the button to resume normal play. Note: The sound is muted.

Frame by frame advance play [DVD] [Video CD] Press the k button in the still picture mode. Each time the button is pressed, the picture advances one frame. Press the button to resume normal play. Note: - The sound is muted. - Frame play is operated forward only.

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM18

E-19

Picture zoom [DVD] [Video CD] 1. Press the SHIFT + 4 ZOOM buttons during play. The central part of the

picture is magnified.

- Each time you press the SHIFT + 4 ZOOM buttons or press the RETURN button, the picture zooms in or out (Zoom +15 Zoom 15).

- Each time you press the 4, a, 5 or b button, the picture moves from side to side, up and down.

2. To return to normal play, press the CANCEL button. Note: Picture zoom operation may not work with some discs.

Viewing from a desired camera angle (Multi-Angle) [DVD]

Some DVD discs may contain scenes which have been shot simultaneously from a number of different camera angles. The jacket or case of a disc that are recorded with multi-angle scenes will be marked.

Example:

Note: The recorded angles differ depending on the disc used.

1. Play the disc that is recorded with multi-angle scenes. 2. Press the SHIFT + 2 ANGLE buttons repeatedly until the desired

angle appears.

Example:

Angle replay [DVD] During playing a Multi-angle scene, press the SHIFT + 3 REPLAY buttons. The player skips back to last approximately 10 seconds, then changes it to the next camera angle and plays it, and continues play. (If desired, press both buttons again.)

Repeat play Press the REPEAT button during play (or programmed play) of the title (or track) you want to repeat. Each time the button is pressed, the repeat mode changes as follows.

[DVD] Title (1 REP.): Repeat of the title being played Off: Normal play mode

[Video CD] [CD] 1 (1 REP.): Repeat of the track being played All (ALL REP.): Repeat all tracks Off: Normal play mode

Note: - Repeat play mode may not work correctly with some discs. - Repeat play does not work during menu play of a Video CD with

playback control.

Programmed play [Video CD] [CD] Up to 32 selections can be programmed.

Programming procedure 1. Press the PROGRAM button in the stop mode. PROGRAM screen

appears. PROG. flashes and Pr 1 appears on the display. 2. Press the number button(s) to select the track number.

Example: To select track No. 3, press 3. To select track No.10, press 1, then 0. To select track No.24, press 2, then 4. Note: - If you made a mistake, press the CANCEL button. - Do not use the 10 button. - Press the PROGRAM button to quit this menu.

3. Press the ENTER button. The highlighted box automatically moves to the next program number.

Example:

4. Repeat step 23 above to select another track. 5. Press the button to start play. PROG. remains lit.

When all programmed selections have played, the player stops automatically. - The program contents are retained in memory.

To clear the program one by one In the programming mode, press the 4 or 5 button to select the program number. Then press the CANCEL button.

To clear all the programs In the programming mode, press the n button.

To change the program 1. In the programming mode, press the 4 or 5 button to select the

program number. 2. Press the number button(s) to select the track number to be replaced,

then press the ENTER button.

To use the program again with the same contents Press the PROGRAM button to call up the PROGRAM screen, then press the button.

PROGRAM # Track Track Time

1 0 2 00 : 04 : 57 _ _ _ _ _ _ _ _ _ _ _ _ _ _

00 : 04 : 57

Total programmed time

2

3

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM19

E-20

Selecting subtitle language [DVD] This operation works only with discs on which multiple subtitle languages are recorded. 1. Press the SUBTITLE button during play. SUBTITLE CHANGE

screen appears. 2. Press the 4 button to select On. The language is highlighted.

Example:

3. Press the a or b button to select the desired subtitle language, then press the SUBTITLE button.

Note: - In some cases, the subtitle language is not changed to the selected

one. - When a disc supporting the closed caption is played, the subtitle and

the closed caption may overlap each other on the TV screen. In this case, turn the subtitle off.

- When the desired language is not selected even if the button is pressed, the language is not available on the disc.

- When the power is turned on or the disc is replaced, select the subtitle language again.

- If the subtitle language is not necessary, select Off.

Selecting audio soundtrack language (Multi- Language) [DVD] This operation works only with discs on which multiple audio soundtrack languages are recorded.

1. Press the AUDIO button during play. 2. Press the AUDIO button repeatedly until the desired language appears

on the screen.

Example: AUDIO CHANGE 04 FRENCH

Note: - When the desired language is not selected even if the button is

pressed, the language is not available on the disc. - When the power is turned on or the disc is replaced, select the

language again. - If the desired language is not recorded on the disc, only the available

language on the disc will be heard. - This system automatically mutes the playback sound temporarily in

order to prevent a noise from generating when the audio soundtrack language is switched to another. So, if the playback is muted temporarily when you switch the audio soundtrack languageto another on a disc that has two or more audio soundtrack languages, this is not a malfunction of this system.

Changing the audio channel output [Video CD] During a Video CD play, press the AUDIO buttons to select an audio channel. LEFT MONO v RIGHT MONO v STEREO v LEFT MONO ...

Selecting on-screen information Press the ON SCREEN button repeatedly to show the disc information (Title, Chapter, current titles elapsed playing time, Language, etc.).

Example for DVD: 1. Press the ON SCREEN button.

By pressing the 4 or 5 button, the title or chapter information changes.

2. Press the ON SCREEN button.

By pressing the 4 or 5 button, the title or chapter information changes.

3. Press the ON SCREEN button.

Note: The 4 or 5 button can be used only on the active screen while ON SCREEN is working.

Example for VCD: 1. Press the ON SCREEN button.

By pressing the 4 or 5 button, the track or disc information changes.

2. Press the ON SCREEN button.

By pressing the 4 or 5 button, the track or disc information changes.

Note: For Music CDs, please refer to Example for VCD as above.

Current titles elapsed playing time

DVD

Title: 1

Chapter: 4

4 5 Title 0:08:51

Current titles remaining playing time

Current chapters elapsed playing time

Current chapters remaining playing time

DVD

Title: 1

Chapter: 4

4 5 Chapter 0:00:16

DVD

Title: 1

Chapter: 4

4 5 Title 1:07:17

DVD

Title: 1

Chapter: 4

4 5 Chapter 0:05:37

Audio modeAudio language

Subtitle language Camera angle

Current discs elapsed playing time

Current tracks elapsed playing time

Current tracks remaining playing time

DVD

ENGLISH

ENGLISH

Dolby Digital 2.0ch

3/5

VCD

Track: 2 4 5 Disc 04:34

VCD

Track: 2 4 5 Track 01:02

VCD

Track: 2 4 5 Disc 32:19

VCD

Track: 2 4 5 Track 00:26

Current discs remaining playing time

SUBTITLE CHANGE On o

Prev. b 02 ENGLISH a Next

p

Off

Hello! Hol! Hola!

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM20

E-21

MP3 CD OPERATION

This player can play back CD-R/RWs that have recorded music data or MP3 files. Before playing back an MP3 CD, please read the following.

MP3 CD information Limitations on MP3 CD play - This player can recognize up to 255 files or folders per disc. The CD

with 256 files or folders and more is not available on this player. - This player can recognize up to 8 directory trees per disc. - MP3 CDs may not be played in the recorded order. - As for a multi-session disc, only the first session can be played. - If the CD has both audio tracks and MP3 files, only audio tracks are

played. - It would take 30 seconds or more for this player to read MP3 files

depending on its structure.

Limitations on the display - The display can show up to 33 letters at a time. Available letters on the

display are the following: capital or small alphabets of A through Z, numbers of 0 through 9, and _ (underline).

- Other letters than those above are replaced in blank.

Notes on MP3 files - The recommend recording setting for a high-quality sound is 44.1 kHz

of sampling frequency and 128 kbps of fixing bit rate. - To play an MP3 CD in the recorded order,

1. Please use the MP3 software with the function that can record data alphabetically or numerically.

2. Put the name including two-digit or three-digit number like 01, 02 or 001, 002 on each file.

3. Please refrain from making many sub-folders by preference. - Some MP3 CDs can not be played back depending on the recording

conditions.

MP3 CD Play 1. Load an MP3 CD.

A table of contents in the root directory appears on the TV screen.

Example: (the root directory)

Note: If nothing appears on the TV screen, press the MENU button.

2. Select the desired file by pressing the 4 or 5 button. The selected file is highlighted. - To go on to the next directory, select the appropriate folder and

press the a button. A table of contents in the selected directory appears on the TV screen.

- To go back to the previous directory, press the b button. - You can go on up to the eighth directory.

3. Press the ENTER (or ) button to start playback. Elapsed playing time and total playing time in current file are displayed on the TV screen.

Example: (the second directory)

Notes on file skip Skipping forward Press the e button during play to skip to the next file. Each time the button is pressed, a file is skipped within the same directory.

Skipping back Press the f button during play to skip back to the beginning of the file currently played. Press the button again immediately to skip back to the beginning of the previous file.

Note: - The files with no-MP3 extension and the folders are automatically

skipped. - To roll up and down the display, press the 4 and 5 buttons respectively.

Filesystem Browse

Directory : / LABEL_1/

MUSIC004.mp3

MUSIC005.mp3

MUSIC006.mp3

LABEL_1_001/

LABEL_1_002/

File 1/5 00:00:45/00:05:16

File information

Filesystem Browse Directory : /

MUSIC001.mp3 MUSIC002.mp3 LABEL_1/ LABEL_2/ MUSIC003.mp3

Please select a file.

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM21

E-22

LANGUAGE CODE LIST

Enter the appropriate code number for the settings AUDIO, SUBTITLE and DVD MENU on the SET UP MENU.

6565 aa Afar 6566 ab Abkhazian 6570 af Afrikaans 6577 am Amharic 6582 ar Arabic 6583 as Assamese 6589 ay Aymara 6590 az Azerbaijani 6665 ba Bashkir 6669 be Byelorussian 6671 bg Bulgarian 6672 bh Bihari 6673 bi Bislama 6678 bn Bengali; Bangla 6679 bo Tibetan 6682 br Breton 6765 ca Catalan 6779 co Corsican 6783 cs Czech 6789 cy Welsh 6865 da Danish 6869 de German 6890 dz Bhutani 6976 el Greek 6978 en English 6979 eo Esperanto 6983 es Spanish 6984 et Estonian 6985 eu Basque 7065 fa Persian 7073 fi Finnish 7074 fj Fiji 7079 fo Faeroese 7082 fr French 7089 fy Frisian 7165 ga Irish 7168 gd Scots Gaelic 7176 gl Galician 7178 gn Guarani 7185 gu Gujarati 7265 ha Hausa 7273 hi Hindi 7282 hr Croatian 7285 hu Hungarian 7289 hy Armenian 7365 ia Interlingua

7369 ie Interlingue 7375 ik Inupiak 7378 in Indonesian 7383 is Icelandic 7384 it Italian 7387 iw Hebrew 7465 ja Japanese 7473 ji Yiddish 7487 jw Javanese 7565 ka Georgian 7575 kk Kazakh 7576 kl Greenlandic 7577 km Cambodian 7578 kn Kannada 7579 ko Korean 7583 ks Kashmiri 7585 ku Kurdish 7589 ky Kirghiz 7665 la Latin 7678 ln Lingala 7679 lo Laothian 7684 lt Lithuanian 7686 lv Latvian, Lettish 7771 mg Malagasy 7773 mi Maori 7775 mk Macedonian 7776 ml Malayalam 7778 mn Mongolian 7779 mo Moldavian 7782 mr Marathi 7783 ms Malay 7784 mt Maltese 7789 my Burmese 7865 na Nauru 7869 ne Nepali 7876 nl Dutch 7879 no Norwegian 7967 oc Occitan 7977 om (Afan) Oromo 7982 or Oriya 8065 pa Punjabi 8076 pl Polish 8083 ps Pashto, Pushto 8084 pt Portuguese 8185 qu Quechua 8277 rm Rhaeto-Romance

8278 rn Kirundi 8279 ro Romanian 8285 ru Russian 8287 rw Kinyarwanda 8365 sa Sanskrit 8368 sd Sindhi 8371 sg Sangro 8372 sh Serbo-Croatian 8373 si Singhalese 8375 sk Slovak 8376 sl Slovenian 8377 sm Samoan 8378 sn Shona 8379 so Somali 8381 sq Albanian 8382 sr Serbian 8383 ss Siswati 8384 st Sesotho 8385 su Sundanese 8386 sv Swedish 8387 sw Swahili 8465 ta Tamil 8469 te Tegulu 8471 tg Tajik 8472 th Thai 8473 ti Tigrinya 8475 tk Turkmen 8476 tl Tagalog 8478 tn Setswana 8479 to Tonga 8482 tr Turkish 8483 ts Tsonga 8484 tt Tatar 8487 tw Twi 8575 uk Ukrainian 8582 ur Urdu 8590 uz Uzbek 8673 vi Vietnamese 8679 vo Volapk 8779 wo Wolof 8872 xh Xhosa 8979 yo Yoruba 9072 zh Chinese 9085 zu Zulu

Code LanguageAbbreviation of the language

Code LanguageAbbreviation of the language

Code LanguageAbbreviation of the language

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM22

E-23

LISTENING TO VIDEO SOURCES

1. Press the INPUT button to select VIDEO 1 or VIDEO 2. 2. Follow the instructions supplied with the VCR or other video equipment.

LISTENING TO THE RADIO

To turn the unit on and listen to the last received station, press the TUNER button on the remote control.

Automatic/Manual tuning 1. Press the INPUT or TUNER button to select FM or AM.

When using the remote control, press the TUNER button instead of the INPUT button.

2. Automatic tuning Press the TUNING + or TUNING button for at least 1 second to tune in a station. The unit will scan up or down the band and receive the next receivable station. Press the button again to continue. Manual tuning Press the TUNING + or TUNING button briefly until the desired frequency is displayed.

To preset stations Up to 20 FM and 10 AM stations can be preset.

Automatic presetting (APT) 1. Press the INPUT or TUNER button to select FM or AM. 2. Press the MEMORY button for at least 3 seconds. PROG. flashes.

The automatic tuning mode is set and automatic presetting begins from the low end of the band. When 20 FM or 10 AM stations have been preset or the high end of the band is reached, automatic presetting stops. PROG. disappears and the station memorized on channel 1 will be heard.

3. To preset stations on the other band, follow steps above.

Note: If APT is activated, all previously programmed stations of the band will be cleared and new stations will be programmed.

Manual presetting 1. Tune in the station to be preset as described in Automatic/Manual

tuning. 2. Press the MEMORY button.

3. While PROG. is flashing, press the PRESET button to select the channel to be preset.

4. While PROG. is flashing, press the MEMORY button. - In this example, 90.1 MHz FM station is preset on FM channel

9.

5. Repeat steps above to add more preset stations.

- When presetting a new station, the previous preset station is cleared.

Listening to preset stations 1. Press the INPUT or TUNER button to select FM or AM. 2. Press the PRESET button briefly to select the desired channel.

- The number buttons on the remote control can also be used. Example: Press 0, then 9.

Preset scan tuning 1. Press the INPUT or TUNER button to select FM or AM. 2. Press the PRESET button for at least 1 second. The channel number

appears. Each of the preset stations is tuned in for 5 seconds. - The PRESET button on the remote control can also be used.

3. When the desired station has been tuned in, press the PRESET button again to keep the reception locked at that station.

To receive FM stereo broadcasts Make sure that MONO is not displayed. If MONO appears, press the FM MODE button to turn the MONO indication off. ST appears when an FM stereo broadcast is received. - If the signal from an FM stereo station is weak and reception is poor,

press the FM MODE button to change to the MONO mode. The reception may be improved, but the sound will be monaural.

MHz

PROG.

MHz

PROG.

MHz

MHz

(U.S.A. and Canada models)

(U.S.A. and Canada models)

(U.S.A. and Canada models)

(U.S.A. and Canada models)

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM23

E-24

Using the sleep timer The sleep timer automatically switches off the power after a preset time has elapsed. The volume will gradually be reduced (faded-out) from 1- minute before the unit turns off. There are 9 time periods available: 90, 80, 70, 60, 50, 40, 30, 20, and 10 minutes.

Press the SHIFT + 6 SLEEP buttons repeatedly to select the desired sleep time. SLEEP appears on the display. After several seconds, the original display returns and the brightness of the display reduces.

To check the remaining sleep time Press the SHIFT + 6 SLEEP buttons once. After several seconds, the original display returns.

To release the sleep timer while in operation Press the SHIFT + SET/CLEAR buttons. The timer is also released if the power is switched off.

TIMER OPERATION (Using the remote control)

Using the timer Set the time when the timer turns on and off, source to be used and volume level. Timer operation will start with the selected source at the on time. The power will be switched off at the off time. The timer will function every day unless it is released.

Preparation Note: Make absolutely sure that the clock is set to the correct time before setting the timer.

- Select the source for timer operation and prepare the source to be used. - If the selected source is the tuner, tune in to the desired band and

station. - Adjust the volume level as desired.

Operation 1. Press the SHIFT + 7 TIMER buttons.

The previously set timer on time setting appears. 2. Press the SHIFT + 8 ADJUST buttons within 15 seconds.

3. Set the hour of the on time by pressing the TUNING or + button, then press the SHIFT + 8 ADJUST buttons.

Set the minute in the same way.

The timer off time setting appears.

4. Set the timer off time as described in step 3. 0 blinks. 5. While 0 is flashing, press the INPUT button to select the source to

be used. 6. Press the SHIFT + 8 ADJUST buttons.

The timer operation standby mode is activated. 0 remains lit. 7. Press the STANDBY/ON button to switch off the power.

- 0 disappears from the display when this system is turned into the standby mode.

- To switch off the power during a timer-controlled operation, press the STANDBY/ON button. The timer will be set in the standby mode.

To check the timer settings Press the SHIFT + 7 TIMER buttons repeatedly. The timer settings are displayed in the following order:

On time v Off time v Source

To change the settings, press the SHIFT + 7 TIMER buttons to select the setting to be changed, then press the SHIFT + 8 ADJUST buttons to make the display flash. Change the setting as explained above.

To release the timer After turning the power on, press the SHIFT + 7 TIMER buttons, then press the SHIFT + SET/CLEAR.

Note: - If the SHIFT + SET/CLEAR buttons are pressed while the timer is

being set, the original display returns. - The timer mode is released if a power failure occurs during timer

controlled operation. - The timer may not operate if a power failure occurs during timer

operation standby mode.

x

x

ON

ON

ON ON

ON OFF

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM24

E-25

TROUBLESHOOTING GUIDE

If you have followed the instructions and are having difficulty in operating the unit, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.

SYMPTOM

No picture.

No sound.

The playback picture is poor.

appears on the TV screen.

The DVD player does not start play.

The operation or display is not normal.

The remote control does not work properly.

POSSIBLE CAUSE

An improper source is selected.

No disc is loaded or an unplayable disc is loaded.

The TV is not set to receive signal from the unit.

An improper source is selected.

Volume control is set to minimum.

An unplayable disc is loaded.

The selected function does not operate on the current disc.

No disc is loaded.

An unplayable disc is loaded.

The disc is loaded with the label side down.

The disc is dirty.

PARENTAL is set.

The memory must be reset.

The batteries in the remote control are weak, or installed incorrectly.

The remote control is not aimed at the remote control sensor.

CORRECTIVE ACTION

Select the correct source.

Load a disc or load a playable disc. (Check the disc logo, type, color system and regional code.)

Select the correct input function on the TV.

Select the correct source.

Turn up the volume.

Load a playable disc. (Check the disc logo, type, color system and regional code.)

The feature or action cannot be completed at this time because: - The feature is not available at the moment. - The DVD software restricts it. - The DVD software does not support the feature

(e.g., angles).

Load a disc.

Load a playable disc. (Check the disc logo, type, color system and regional code.)

Load the disc on the disc tray correctly.

Clean the disc or replace it.

Cancel the parental lock function or change the rating level. Reset it after play.

1. Disconnect the power cable of the unit. 2. While pressing both BASS and MUSIC buttons

at the same time, connect the power cable. 3. Resume operation.

Check the battery polarity (+ or ). Replace the batteries.

Aim the remote control at the remote control sensor.

For customers using a TV without progressive scanning capability (U.S.A., Canada and Korean models only) There may be the following case if the VIDEO OUT SCAN SELECT switch on the rear of the unit is set to SELECTABLE and the VIDEO OUT SELECT switch to COMPONENT.

If you select COMPONENT OUTPUT: PROGRESSIVE on Display in the SET UP MENU while watching a picture played back on this system, no picture is displayed on the TV.

In such a case, set the VIDEO OUT SELECT switch to INTERLACE, then turn this system off and on again. The picture will be displayed on the TV.

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM25

E-26

AMPLIFIER SECTION Output Power

FRONT L/R, CENTER, SURROUND L/R 1 kHz, 10% THD, 8 ............................................................................... 35 W

SUBWOOFER 100 Hz, 10% THD, 8 ............................................................................. 40 W

[U.S.A. and Canada models] FRONT L/R, CENTER, SURROUND L/R

1 kHz, 0.9% THD, 8 ........................................................................... 30 W SUBWOOFER

100 Hz, 0.9% THD, 8 ......................................................................... 35 W

Inputs VIDEO 1 (RCA)

AUDIO ................................................................................................ Analog VIDEO .......................................................................................... Composite

VIDEO 2 (RCA) [U.S.A., Canada, Australia, China, Korean and General models]

AUDIO ................................................................................................ Analog VIDEO .......................................................................................... Composite

VIDEO 2 (EURO AV) [U.K. and Europe models]

AUDIO ................................................................................................ Analog VIDEO .......................................................................................... Composite

Outputs VIDEO 1 (RCA)

AUDIO ................................................................................................ Analog VIDEO .......................................................................................... Composite

MONITOR OUT VIDEO (RCA) .................................................................................. Composite S-VIDEO ........................................................................................... DVD only COMPONENT

[U.S.A., Canada, Australia, China, Korean and General models] .. DVD only EURO AV

[U.K. and Europe models] AUDIO ................................................................................................ Analog VIDEO ........................................................ RGB (DVD only) & Composite

SPEAKERS FRONT L/R ................................................................................................. 8 CENTER ..................................................................................................... 8 REAR L/R ................................................................................................... 8 SUBWOOFER ............................................................................................ 8

DVD PLAYER SECTION Type ............................................................................................ DVD video player Playback standard

[U.S.A., Canada and Korean models] ........................................................ NTSC [U.K., Europe, Australia, China and General models] .................................. PAL

Laser .............................................. Semiconductor laser, wavelength: 650/790 nm Laser output (Continuous wave max.) ............................................... 1 mW (DVD)

0.5 mW (CD) Signal to Noise Ratio (IHF-A Network, shorted) ....................... More than 105 dB Total Harmonic Distortion .......................................................................... 0.003 % Wow and flutter ................................................................. Below measurable level

TUNER SECTION FM Tuning Range

[U.S.A. and Canada models] .................................................. 87.9 to 107.9 MHz [Other models] .................................................................... 87.50 to 108.00 MHz

AM Tuning Range [U.S.A. and Canada models] ...................................................... 520 to 1710 kHz [U.K. and Europe models] .......................................................... 522 to 1611 kHz [Australia, China and Korean models] ....................................... 522 to 1710 kHz [General model] .................................................................. 522/520 to 1710 kHz

SPEAKER SECTION Front and Surround Speakers

Model Name .......................................................................................... NX-S60S Type ...................................................................................... Acoustic suspension Speakers ........................................................... 5 cm (2 inch) full range cone x 2,

magnetic shielding Impedance ...................................................................................................... 8

Center Speaker Model Name ......................................................................................... NX-S60C Type ...................................................................................... Acoustic suspension Speakers ........................................................... 5 cm (2 inch) full range cone x 2,

magnetic shielding Impedance ...................................................................................................... 8

Subwoofer Model Name ............................................................................................ SW-S60 Speaker ................................................. Passive 16 cm (6-1/2 inch) cone woofer,

magnetic shielding Impedance ...................................................................................................... 8

GENERAL Power Supply

[U.S.A. and Canada models] ...................................................... AC 120 V/60 Hz [Australia model] ................................................................ AC 230240 V/50 Hz [U.K. and Europe models] .......................................................... AC 230 V/50 Hz [China model] ............................................................................. AC 220 V/50 Hz [Korean model] ........................................................................... AC 220 V/60 Hz [General model] ............................................. AC 110120/220240 V, 50/60 Hz

Power Consumption [U.S.A., Canada and Korean models] ........................................................ 230 W [U.K., Europe, Australia, China and General models] ............................... 170 W

Standby Power Consumption DVR-S60 ..................................................................................................... 1.8 W

Dimensions (W x H x D) DVR-S60 ............................................................................... 435 x 90 x 381 mm

(17-1/8 x 3-9/16 x 15) SW-S60 ................................................................................ 200 x 351 x 206 mm

(7-7/8 x 13-13/16 x 8-1/8) NX-S60C ............................................................................... 300 x 72 x 110 mm

(11-13/16 x 2-13/16 x 4-5/16) NX-S60S ............................................................................... 72 x 164 x 111 mm

(2-13/16 x 6-7/16 x 4-3/8)

Weight DVR-S60 ..................................................................................................... 8.0kg

(17 lbs 10 oz) SW-S60 ........................................................................................................ 4.8kg

(10 lbs 9 oz) NX-S60C ..................................................................................................... 1.1kg

(2 lbs 7 oz) NX-S60S ..................................................................................................... 0.9kg

(2 lbs)

SPECIFICATIONS

A3-60U-E (02.7.26)a 02.8.8, 3:39 PM26

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT B

Manualsnet FAQs

If you want to find out how the DVR-S60 Yamaha works, you can view and download the Yamaha DVR-S60 Theater System Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha DVR-S60 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha DVR-S60. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha DVR-S60 Theater System Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha DVR-S60 Theater System Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha DVR-S60 Theater System Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha DVR-S60 Theater System Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha DVR-S60 Theater System Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.