Contents

Yamaha DVR-700 Theater System Owner's Manual PDF

1 of 86
1 of 86

Summary of Content for Yamaha DVR-700 Theater System Owner's Manual PDF

2008 All rights reserved.

UC

OWNERS MANUAL MODE DEMPLOI

DVX-700 (DVR-700 + NS-PSW700 + NS-P700)

DVD HOME THEATER SYSTEM SYSTEME HOME CINEMA AVEC LECTUER DVD

D V

X -700

Printed in China WQ33520

LASER INFORMATION INFORMATION LASER

The name plate is located on the rear panel of the DVD controller.

La plaque signaltique se trouve sur le panneau arrire du lecteur de DVD.

Without top cover Sans couvercle suprieur

Caution-i En

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance

with the manufacturers instructions. 8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

Note to CATV system installer: This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3 NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place way from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 5 cm on the top, left, right, and the back of this unit.

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, nor locate this unit in an environment with high humidity (i.e., a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign objects may fall onto this unit or where this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e., candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall, spilling the liquid and causing an electrical shock to the user and/ or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use excessive force on switches, knobs and/or cords. 10 When disconnecting the power cord from the wall outlet,

grasp the plug; do not pull the cord. 11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth. 12 Use only the voltage specified on this unit. Using this unit

with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.

13 To prevent damage by lightning, keep the power cord out and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reason.

15 When not planning to use this unit for long periods of time (i.e., vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the TROUBLESHOOTING section on common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set the unit in standby mode, then disconnect the AC power plug from the wall outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power cable from the outlet, then leave the unit alone.

19 When using the unit for a long time, the unit may become warm. Turn the power off, then leave the unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

22 Excessive sound pressure from earphones and headphones can cause hearing loss.

23 When replacing the batteries, be sure to use batteries of the same type. Danger of explosion may happen if batteries are incorrectly replaced.

Caution: read this before operating your unit.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference.

Caution-ii En

LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.

DANGER This unit emits visible laser radiation when open. Avoid direct eye exposure to beam. When this unit is plugged into a wall outlet, do not place your eyes close to the opening of the disc loader and other openings or look inside.

LASER Type Semiconductor laser ALGaInP Wave length 655nm (DVD)

790nm (VCD/CD) Output Power 5/7mW (DVD/VCD,CD) Beam divergence 20degrees

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Caution-iii En

1 En

1

2

3

4

5

6

7

8

E n

g lish

INTRODUCTION.................................................. 2 Main unit......................................................................... 4 Supplied accessories ....................................................... 4

FUNCTIONAL OVERVIEW.................................. 5 Front panel (DVR-700) .................................................. 5 Rear panel (DVR-700).................................................... 6 Front panel display (DVR-700)...................................... 7 Rear panel (NS-PSW700)............................................... 8 Remote control ............................................................... 9

CONNECTIONS................................................. 11 Roles and layout of the speakers .................................. 11 Placing the speakers using the stands ........................... 12 Placing the speakers on a wall ...................................... 12

SYSTEM CONNECTIONS................................. 14 Connecting the speakers ............................................... 14 Connecting the DVD controller and the subwoofer/system

control ...................................................................... 16 OTHER CONNECTIONS ................................... 17

Connecting a TV........................................................... 17 Connecting an HDMI component................................. 18 Connecting the FM antenna.......................................... 18 Connecting external AV components........................... 19 Connecting the power cable ......................................... 20

GETTING STARTED ......................................... 21 Inserting batteries into the remote control.................... 21 Using the remote control .............................................. 21 Turn on the system ....................................................... 22 Setting the video input/output....................................... 23 Setting language preferences ........................................ 25

DISC OPERATION ............................................ 26 Playing discs ................................................................. 26 Basic playback controls ................................................ 27 Ejecting a disc............................................................... 28 Using the disc menu (DVD only) ................................. 28 Playback control (PBC) (Video CD only).................... 28 Changing soundtrack language..................................... 28 Changing subtitle language .......................................... 29 Resuming playback from the last stopped point........... 29 Viewing from another angle ......................................... 29 Displaying disc information ......................................... 29 Zooming in ................................................................... 29 Advanced operation...................................................... 30 Disc navigator............................................................... 32

PLAYING OTHER DISCS.................................. 33 To play back audio files................................................ 33 To start a slide show of JPEG files............................... 34 Selecting a file to play back.......................................... 34 Using a USB device...................................................... 35

DVD SETUP MENU OPTIONS.......................... 36 Menu overview............................................................. 36

VIDEO ADJUST MENU ..................................... 37

INITIAL SETTINGS MENU ................................ 38 Video Output................................................................. 38 Language....................................................................... 40 Display .......................................................................... 41 Options .......................................................................... 41

AIR SURROUND XTREME................................ 43 What is AIR SURROUND XTREME? ........................ 43 Listening to surround mode of AIR SURROUND

XTREME.................................................................. 43 Shifting the optimum listening area from side to side .. 44 Selecting the optimum distance between the

speakers .................................................................... 44 Checking the virtual surround effect............................. 45 Using extended stereo mode ......................................... 45 Setting compressed music enhancer ............................. 45

LISTENING TO FM BROADCASTS.................. 46 Basic tuning operation .................................................. 46 Using station preset feature........................................... 47 Recalling the preset stations.......................................... 49

LISTENING TO XM SATELLITE RADIO BROADCASTS .............................................. 50 Connecting XM Mini-Tuner Home Dock..................... 50 Activating XM Satellite Radio...................................... 50 Basic XM Satellite Radio operations ............................ 51 Setting the XM Satellite Radio preset channels............ 52 Displaying the XM Satellite Radio information ........... 53

LISTENING TO SIRIUS SATELLITE RADIO BROADCASTS .............................................. 54 Connecting the SiriusConnect tuner.......................... 54 Activating SIRIUS Satellite Radio subscription ....... 55 Basic SIRIUS Satellite Radio operations.................. 55 Setting the SIRIUS Satellite Radio preset channels.. 57 Setting the Parental Lock .............................................. 58 Displaying the SIRIUS Satellite Radio

information ............................................................... 59 USING OPTIONAL EQUIPMENT ...................... 60

Using iPod................................................................. 60 Using Bluetooth components .................................... 61

USEFUL OPERATION....................................... 63 Adjusting the audio delay ............................................. 63 Listening at low volume (night listening mode) ........... 63 Adjusting the audio balance for the playback............... 64 Changing the brightness of the front panel display....... 64 Setting the sleep timer................................................... 65 System menu ................................................................. 65 Setting the preset code .................................................. 66

TROUBLESHOOTING....................................... 67 GLOSSARY ....................................................... 74 SPECIFICATIONS ............................................. 76 INDEX................................................................. 77

LIST OF PRESET CODES.............................................. i LIST OF COUNTRY CODES....................................... ii LIST OF LANGUAGE CODES................................... iii

CONTENTS

1. INTRODUCTION

2. CONNECTIONS

3. PREPARATION

4. BASIC OPERATIONS

5. DVD SETUP MENU

6. OTHER FUNCTIONS

7. USEFUL OPERATION

8. ADDITIONAL INFORMATION

APPENDIX

INTRODUCTION

Thank you for purchasing this unit. This Owners Manual explains the basic operation of this unit.

Notes about discs This DVD controller is designed for use with the

following discs.

Notes

DVD-R/-RW/-R DL and DVD+R/+RW/+R DL discs recorded in DVD-Video compatible format.

DVD-R/-RW/-R DL discs recorded in VR format (compatible with CPRM).

CD-R/RW, DVD-R/-RW/-R DL and DVD+R/ +RW/+R DL cannot be played unless finalized.

Multi-session discs are not supported. Some discs recorded on PC cannot be played

depending on the settings of the application software.

Discs recorded on PC in packet write format are not compatible with this DVD controller.

This unit is not compatible with 8-cm discs.

This controller can play the following formatted files recorded on CD-R/RW, DVD-R/-RW, DVD+R/+RW and USB device.

Compressed audio file MPEG1 audio layer3 (MP3) Windows Media Audio (WMA) MPEG-4 AAC

Still image file JPEG FUJICOLOR CD KODAK Picture CD

Movie file (except files saved on USB devices)

WMV DivX Ultra

Official DivX Ultra Certified product.

Plays all versions of DivX video (including DivX 6) with enhanced playback of DivX media files and the DivX Media Format.

Hint

Refer to DISC OPERATION on page 26 for details.

Cleaning discs When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe in a circular motion.

Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.

Avoid high temperatures, moisture, water and dust

Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight).

Avoid condensation problem The lens may cloud over when the controller is

suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the controller in the warm environment until the moisture evaporates.

Disc care Write only on the printed side of a CD-R/RW,

DVD-R/-RW/-R DL, DVD+R/+RW/+R DL and only with a soft felt tipped pen.

Handle the disc by its edge; do not touch the surface.

Lens care Basically, lens cleaning is not necessary. Do not use lens cleaner because it may cause

malfunction.

Cabinet care Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solution containing alcohol, spirits, ammonia, or abrasives.

Choosing a suitable location Place the controller on a flat, hard, and stable

surface.

INTRODUCTION

DVD disc: DVD-Video, DVD-R/-RW/-R DL, DVD+R/+RW/+R DL

Compact Disc: Audio CD, CD-R, CD-RW, Video CD, Super Video CD

2 En

INTRODUCTION E

n g

lish IN

T R

O D

U C

T IO

N

1 Region codes The unit is designed to support the Region Management System. Check the region code number on the disc package. If the number does not match the units region number (Refer to the table below or the back of the unit), the unit may be unable to play the disc.

Features

Destination Region code of DVR-700

Playable discs

U.S.A., and Canada model

Europe model

Asia and Taiwan models

Australia model

Russia model

1 1 ALL

2 2 ALL

3 3 ALL

4 4 ALL

5 5 ALL

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, MLP Lossless and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Surround are registered trademarks of DTS, Inc.

DivX, DivX Ultra Certified, and associated logos are trademarks of

DivX, Inc. and are used under license.

HDMI, the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

The XM name and related logos are registered trademarks of XM Satellite Radio Inc.

2006 SIRIUS Satellite Radio Inc. SIRIUS, SiriusConnect, the SIRIUS dog logo, channel names and logos are trademarks of SIRIUS Satellite Radio Inc.

Apple, iPod, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.

Bluetooth is a registered trademark of Bluetooth SIG and is used by Yamaha in accordance with a license agreement.

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

This system employs new technologies and algorithms that make it possible to achieve 7-channel surround sound with only two speakers, and without using wall reflections.

3 En

INTRODUCTION

Main unit Supplied accessories

Speaker (L/R) (NS-P700)

Subwoofer/system control (NS-PSW700)

DVD controller (DVR-700)

Speaker package SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO

PLAY MODE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

ANGLE

CLEAR

MEMORY

LOCK

SUBTITLE

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

CH

SRCH MODE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

U

OWNERS MANUAL MODE DEMPLOI

DVX-700 (DVR-700 + NS-PSW700 + NS-P700)

DVD HOME THEATER SYSTEM SYSTEME HOME CINEMA AVEC LECTUER DVD

Remote control

Battery x 2 (AA, R6, UM-3)

System control cable (4 m)

Speaker cable x 2 (4 m)

Video pin cable (1.5 m)

Indoor FM antenna

Cover (For NS-PSW700)

Screw x 6 (for cover 3 x 6 mm)

Stand x 2 (For NS-P700)

Screw x 2 (for stand 4 x 10 mm)

Owners Manual

(U.S.A., Canada, Asia and Taiwan models)

(Europe, Russia and Australia models)

4 En

E n

g lish

IN T

R O

D U

C T

IO N

1

Front panel (DVR-700)

1 STANDBY/ON Turns on the system, or sets it to standby mode (Page 22).

2 Disc loading slot Insert a disc to be played.

3 EJECT Ejects a disc in the DVD controller.

4 s

Stops playback.

5 e

Pauses playback.

6 h

Starts playback.

7 INPUT Selects an input source by pressing repeatedly.

8 VOLUME u / d Adjusts the volume level.

9 Remote control sensor Point the remote control towards this sensor.

0 Power indicator Lights up when system is on.

A Front panel display Shows information about the operational status of the unit.

B USB terminal Connect to the USB connector of your USB device (Page 35).

FUNCTIONAL OVERVIEW

STANDBY / ON EJECT INPUT

USB

1 2 3 4 5 6 7 8

B09 A

5 En

FUNCTIONAL OVERVIEW

Rear panel (DVR-700)

1 SYSTEM CONNECTOR terminal Connect to the subwoofer/system control (Page 16).

2 COMPONENT VIDEO OUTPUT jacks Connect to the Y PB/CB PR/CR jacks on your TV (Page 17).

3 VIDEO OUTPUT jack Connect to the video (composite) jack on your TV (Page 17).

4 HDMI OUTPUT terminal Connect to the HDMI input terminal on your TV (Page 18).

SYSTEM CONNECTOR

NS-PSW700 VIDEO

COMPONENT

Y

PB PR

VIDEO OUTPUT

HDMI OUTPUT

1 2 3 4

6 En

FUNCTIONAL OVERVIEW E

n g

lish IN

T R

O D

U C

T IO

N

1 Front panel display (DVR-700)

1 Decoder indicators The respective indicator lights up when any of the decoders of the system is functioning.

2 DOCK indicator Lights up when the system is receiving a signal

from an iPod stationed in the Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately) connected to the DOCK terminal of the subwoofer/system control (Page 20).

Lights up while the Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) is connected to the Bluetooth component (Page 61).

Flashes while the connected Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) and the Bluetooth component are pairing or while the Yamaha Bluetooth wireless audio receiver is searching for the Bluetooth component (Page 61).

3 ENHANCER indicator Lights up when compressed music enhancer mode is selected (Page 45).

4 NIGHT indicator Lights up when you select night listening mode (Page 63).

5 SLEEP indicator Lights up when sleep mode is on (Page 65).

6 Tuner indicators (AUTO/TUNED/STEREO/ MEMORY/HOLD)

AUTO indicator Lights up when the system is in automatic tuning mode (Page 46).

TUNED indicator Lights up when the system is receiving a station (Page 46).

STEREO indicator Lights up when the system is receiving a strong signal from an FM stereo broadcast in automatic tuning mode (Page 46).

MEMORY indicator Flashes to show a station can be stored (Page 47).

HOLD Indicator Flashes while holding the XM/SIRIUS information (Page 53, 59).

7 XM indicator Lights up when the input source is XM Mini-Tuner (Page 50).

8 SIRIUS indicator Lights up when the input source is SiriusConnect tuner (Page 54).

9 Multi information display Shows the playing time. When you adjust or change a setting, the value is displayed.

0 MUTE indicator/VOLUME indicator Flashes while the mute function is activated. Indicates the current volume level.

1 2 3 4 5

9 @

6 7 8

7 En

FUNCTIONAL OVERVIEW

Rear panel (NS-PSW700)

1 ANTENNA terminal Connect the FM antenna.

2 INPUT 1/2 OPTICAL jacks Connect to the DIGITAL OUT jack (Optical Type) on your digital audio component. These input jacks support PCM, Dolby Digital, and DTS bitstream.

3 INPUT 3 COAXIAL jack Connect to the DIGITAL OUT jack (Coaxial Type) on your digital audio component. This input jack support PCM, Dolby Digital, and DTS bitstream.

4 INPUT 4 ANALOG jacks Connect to the ANALOG OUT jack if the component does not have DIGITAL OUT jacks.

5 DOCK terminal Connect the Yamaha iPod Universal Dock (such as YDS-10 or YDS-11, sold separately) or Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) (Page 20).

6 SIRIUS terminal Connect to a SiriusConnect tuner (sold separately).

7 XM terminal Connect to an XM Mini-Tuner and XM Mini-Tuner Home Dock (sold separately).

8 SYSTEM CONNECTOR terminal Connect to the DVD controller.

9 SPEAKER terminals Connect to the speakers.

0 Power cable Connect to a standard AC outlet.

FM 75 UNBAL.

ANTENNA

INPUT

DOCK

SYSTEM CONNECTOR

DVR-700

SPEAKERS

MAINS

SPEAKER IMPEDANCE : 6 MIN.

OPTICAL

OPTICAL

COAXIAL

ANALOG

SIRIUS

XM

1

2

3

4

5

6 7

8

9

@

8 En

FUNCTIONAL OVERVIEW E

n g

lish IN

T R

O D

U C

T IO

N

1 Remote control

1 STANDBY/ON ( ) Turns on the this system, or sets it to the standby mode.

2 FUNC./10KEY Switches the operation of the Function/Numeric keypad keys. Also, the preset code to operate TV or STB.

Hint

Using the remote control, you can operate two kinds of peripheral devices such as TV and satellite tuner. When operating them, you need to set the preset codes depending on the components. Refer to Setting the preset code on page 66.

3 POWER Turns on the TV.

Note

To operate your TV with the remote control, you need to set the preset code. Refer to Setting the preset code on page 66.

4 Function / Numeric keypad 0-9 Operates some functions, such as AIR SURROUND XTREME, and enters track numbers or other numbers. The available operation will be changed depending on the FUNC./10KEY position.

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO

PLAY MODE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

ANGLE

CLEAR

MEMORY

LOCK

SUBTITLE

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

CH

SRCH MODE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

1

5

8

A

D

G

K

Q

M

I

9

B

R

P

E

6

2

4

3

7

0

C

F

H

L

O

t S

N

J

FUNC./10KEY: FUNC. side

MOVIE MUSIC SPORTS GAME

Select surround mode.

STEREO Turns extended stereo mode on and off alternately (Page 45).

Turns surround mode off (Page 43).

ENHANCER Turns compressed music enhancer mode on and off alternately (Page 45).

NIGHT Turns night listening mode on and off alternately (Page 63).

SLEEP Sets the sleep timer (Page 65).

DISP. MODE Changes the brightness of the front panel display (Page 64).

AUDIO DELAY Delays the output sound to synchronize it with the video image (Page 63).

ZOOM Enlarges the pictures while playing DVD.

Hint

This button can be used regardless of the FUNC./10KEY position.

ON SCREEN Displays the disc information on the TV display.

Hint

This button can be used regardless of the FUNC./10KEY position.

FUNC./10KEY: 10KEY side

Enters numeric characters using 0 to 9 buttons.

9 En

FUNCTIONAL OVERVIEW

5 AUDIO Selects an audio language for the DVD that is playing (if available).

6 SUBTITLE Selects a subtitle language for the DVD that is playing (if available).

7 ANGLE Selects a camera angle for the DVD that is playing (if available).

8 PLAY MODE Displays the Play Mode menu.

9 s

Stops playback.

0 CLEAR Erases the registered track/chapter order.

A w (LOCK) Rewinds the disc. SIRIUS: Sets a parental lock.

B e

Pauses playback.

C f

Fast-forwards the disc.

D b (SRCH MODE) Selects the previous track or chapter. XM/SIRIUS: Selects the search mode.

E h (AUTO/MANUAL) Starts playback. FM: selects auto/manual tuning (Page 46).

F a (MEMORY) Selects the next track or chapter. FM: registers the radio frequency.

G TOP MENU (INFO.) Displays the top-level disc menu. iPod: switches operation mode of the iPod.

H MENU Displays the disc contents menu.

I Cursors ( / / / ) Selects items or changes values in the menu screen. Tuning the FM station. Controlling an iPod. Changing the settings.

J ENTER Confirms a selection.

K SETUP Displays the DVD setup menu.

L RETURN (CODE SET)

Returns to the previous screen when DVD setup menu is displayed.

Use to set the preset code. Refer to Setting the preset code on page 66.

M TV/STB control buttons TV VOL +/ Adjusts the TV volume level. CH +/ Select the TV channel. TV INPUT Selects the TV input.

Note

To operate your TV with the remote control, you need to set the preset code. Refer to Setting the preset code on page 66. You can select TV or STB by switching FUNC./ 10KEY.

N VOLUME +/ Adjusts the volume level of DVX-700.

O MUTE Mutes the volume of DVX-700. Press the button again to mute OFF.

P Input selection buttons DVD/USB Switches the input source to DVD or USB. Each time you press the button, the input source changes in sequence. TUNER Switches the input source to FM/XM/SIRIUS. INPUT 1-4 Switches the input source to the external input. Each time you press the button, the input source changes in sequence from input 1 to input 4. DOCK Switches the input source to DOCK. Selects iPod or Bluetooth as the input source depending on the option connected to the Dock terminal.

Q POSITION Shifts the optimum listening area according to your listening position (Page 44).

R AREA Sets the distance between speakers for the best surround effect (Page 44).

S SOUND Adjusts the volume balance for the virtual speaker and subwoofer (Page 64).

T TEST Outputs the test tone (Page 45).

10 En

CONNECTIONS

E

n g

lish C

O N

N E

C T

IO N

S

2 Roles and layout of the speakers To enjoy quality sounds, you need to place the speakers in their appropriate positions and install them correctly. The following shows the recommended layout of the speakers.

1 Speaker (L, R) Produces front channel (stereo) sounds. Also produces virtual center channel sounds (dialogue, etc.) and virtual surround channel sounds effectively using the Yamaha front surround system. Place the left and right speakers at equal distances away from the listening position so that you can produce high quality surround sound. You can install the speakers on a rack using the stands or on a wall.

2 Subwoofer/system control The subwoofer produces bass sounds and LFE sounds contained in Dolby Digital or DTS. Place the subwoofer in the front of the listening position. Turn it slightly toward the center of the room to reduce wall reflections.

Notes

To avoid magnetic interference, do not position the speakers too close to your TV. Allow adequate ventilation around the DVD controller and subwoofer/system control. Bass sounds produced by the subwoofer may be heard differently depending on the listening position and

subwoofer location. To enjoy desired sounds, try to change the location of the subwoofer according to the listening position.

You can adjust the surround effect by arranging the position of the speakers (Page 46).

CONNECTIONS

When placing the speakers on a rack When placing the speakers on a wall

1 1

2 DVD controller

1 1

2

DVD controller

11 En

CONNECTIONS

Placing the speakers using the stands

You can place the speakers in an upright position or a horizontal position. Put the speakers on the stands and secure them with the screws.

When placing the speaker in an upright position Place the speaker on the stand vertically, and then secure it with the screw as shown in the illustration.

When placing the speakers in a horizontal position Put the speaker on the stand so that the black side of the speaker becomes outside, and then secure it with the screw as shown in the illustration.

Placing the speakers on a wall Put the speakers on a wall using commercially available screws. Refer to the illustration below for the screw size.

1 When placing the speakers on a wall, remove the stands.

2 Install screws on a wall as shown in the illustration. The distance between the screws: 126 mm for both sides

3 Insert the screws into the holes on the back of the speaker.

Notes

To attach the speaker to a wall with screws, the wall must be firm. If not you may cause the speaker to fall.

Tapping screw (Available at the hardware store) Dia.4 mm (1/8")

Installing on a plaster wall. Installing on a firm wall.

Min 20 mm (3/4")

5 mm (1/4")

Min 20 mm (3/4")

5 mm (1/4")

PlasterPillar or lumber

Pillar or lumber

126 mm (5")

126 mm (5")

12 En

CONNECTIONS E

n g

lish C

O N

N E

C T

IO N

S

2

Use commercially available screws that can support the weight of the installation.

Make sure you use specified screws to attach the speakers to a wall. Using clamps other than specified screws, such as short screws, nails, or two-sided tape, may cause the speaker to fall.

After attaching the speakers, check that the speakers are installed securely. Yamaha will bear no responsibility for any accidents caused by improper installations.

13 En

Connecting the speakers

Note

Do not connect the power cable of the subwoofer/system control into an AC outlet until all cable connections are completed.

SYSTEM CONNECTIONS

VIDEO

COMPONENT

PR

VIDEO OUTPUT

HDMI OUTPUT

Y

PBSYSTEM CONNECTOR

NS-PSW700

MAINS

SYSTEM CONNECTOR

DVR-700

SPEAKERS

SPEAKER IMPEDANCE : 6 MIN.

Speaker (R)

Subwoofer/system control

DVD controller

Speaker (L)

14 En

SYSTEM CONNECTIONS E

n g

lish C

O N

N E

C T

IO N

S

2

Connecting the speakers and subwoofer/system control

Connecting the speakers Confirm the plug colors of the speaker cables.

Speaker cable with white plug: for speaker (L) Speaker cable with red plug: for speaker (R)

1 Push down the knob of the speaker terminal.

2 Insert the stripped speaker cable into the hole on the speaker terminal.

Note

Connect the cable with red tube to the positive terminal, and the other cable to the negative terminal.

3 Release the knob of the speaker terminal.

Connecting the subwoofer/system control

1 Insert the speaker cable plug until you hear a click sound.

Note

Make sure that the cable plugs are connected to the subwoofer/system control terminals of the same color.

2 Use the same procedure to connect the other speaker cable.

for speaker (R): Red plug

for speaker (L): White plug

Red tube

MAINS

SYSTEM CONNECTOR

DVR-700

SPEAKERS

SPEAKER IMPEDANCE : 6 MIN.

from speaker (L)

from speaker (R)

15 En

SYSTEM CONNECTIONS

Connecting the DVD controller and the subwoofer/system control

Connect the SYSTEM CONNECTOR terminal at the rear of the subwoofer/system control to the SYSTEM CONNECTOR terminal at the rear of the DVD controller using the system control cable.

Notes

Make sure that the system control cable is correctly connected. Improper connections may damage the system due to a short-circuit.

To prevent unwanted noise, do not place the subwoofer too close to the DVD controller, AC power adaptor, TV or other sources of radiation.

Do not insert the Power cable to an AC outlet until all connections are completed.

MAINS

SYSTEM CONNECTOR

DVR-700

SPEAKERS

SPEAKER IMPEDANCE : 6 MIN.

VIDE

COMPONENT

VIDEO OUTPUT

Y

PBSYSTEM CONNECTOR

NS-PSW700

NS-PSW700

SYSTEM

CONNECTOR

DV

Tighten the screws.

Tighten the screws.

16 En

E n

g lish

C O

N N

E C

T IO

N S

2 Connecting a TV

Notes

You only need to make one video connection from the following options (A or B), depending on the capabilities of your TV.

Do not connect the power cables until all cable connections are completed.

COMPONENT VIDEO OUTPUT jacks

Use the component video cables (Green/Blue/Red, not supplied) to connect the DVD controllers Y PB PR jacks to the corresponding component video input jacks (or the Y PB/CB PR/CR YUV jacks) on your TV. Progressive scan video quality is only available when using Y PB PR in conjunction with a progressive scan TV. To activate the progressive scan function, refer to Selecting the output type for COMPONENT VIDEO OUTPUT jacks on page 24.

VIDEO OUTPUT jack Use the Video pin cable (yellow-supplied) to connect the DVD controllers VIDEO OUTPUT jack to the video input jack (or A/V In/Video In/Composite/Baseband jack) on your TV.

OTHER CONNECTIONS

SYSTEM CONNECTOR

NS-PSW700 VIDEO

COMPONENT

PR

VIDEO OUTPUT

Y

PB

TV

DVD controller

17 En

OTHER CONNECTIONS

Connecting an HDMI component HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital A/V (audio/ video) interface. By connecting to an HDMI component (such as a TV), you can enjoy standard, enhanced or high-definition video as well as digital audio using a single cable. When used in combination with HDCP (High-bandwidth Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operators. For further information on HDMI, visit the HDMI website at http://www.hdmi.org/.

Viewing and Listening to playback from an HDMI component To output an HDMI signal, you need to configure the settings manually. It is necessary to prepare in advance to output an HDMI signal.

1 Set the system to standby mode.

2 Connect the HDMI terminals on your HDMI compatible device and the DVD controller using a commercially available HDMI cable.

3 To output an audio signal from the DVD controller to the HDMI compatible device, refer to System menu on page 65. After doing the settings, set the DVD controller to standby mode, and then turn on the system again.

4 To set the video output according to the HDMI compatible device, refer to Video Output on page 38 to access the DVD setup menu, and then set the two items under Video output in the system menu. HDMI Resolution HDMI Color

Notes

This unit is designed to connect to HDMI compatible devices. If you connect to the DVI component, the system may not operate correctly.

The DVD controller is not compatible with HDCP- incompatible HDMI or DVI components.

You need a commercially available HDMI/DVI conversion cable when you connect the DVD controller to other DVI components.

If you connect the system to the DVI component with a HDMI/DVI conversion cable, the HDMI terminal of the DVD controller does not output any audio signals.

Do not disconnect or connect the HDMI cable from the DVD controller or turn off the power of the HDMI/DVI component connected to the HDMI OUTPUT terminal of the DVD controller while data is being transferred. Doing so may disrupt playback or cause noise.

PCM signal downmixed to two channels can be output from the HDMI output terminal.

Connecting the FM antenna

Connect an indoor FM antenna to the ANTENNA terminal. Extend the FM antenna and fix its ends to the wall. For better FM stereo reception, connect an external FM antenna.

Notes

Adjust the position of the antenna for optimal reception.

Position the antenna as far as possible from your TV, VCR or other sources of radiation to prevent unwanted interference.

VIDEO

COMPONENT

PR

VIDEO OUTPUT

Y

PB

HDMI OUTPUT

HDMI IN

TV

DVD controller FM

75 UNBAL.

ANTENNA

INPUT

Subwoofer/system control

18 En

OTHER CONNECTIONS E

n g

lish C

O N

N E

C T

IO N

S

2 Connecting external AV components If you connect external AV equipment, such as a VCR or cassette deck, to the audio input terminal on the subwoofer/system control, you can listen to those audio sources on the system. This section provides some examples of VCR and digital AV equipment connections. Connecting analog AV components Connect the DVD controller and external AV equipment as shown in the illustration. Connecting digital AV components Connect the subwoofer/system control and external AV equipment as shown in the illustration. When connecting to optical type digital AV components When connecting to coaxial type digital AV components INPUT DOCK OPTICAL OPTICAL COAXIAL ANALOG TV VCR (for example) Subwoofer/system control INPUT DOCK OPTICAL OPTICAL COAXIAL ANALOG OPTICAL DIGITAL OUTPUT OPTICAL DIGITAL OUTPUT Digital audio component Subwoofer/system control Game console INPUT DOCK OPTICAL OPTICAL COAXIAL ANALOG COAXIAL DIGITAL OUTPUT Digital audio component

19 En

OTHER CONNECTIONS

Connecting optional equipment The system is equipped with the DOCK terminal, which allows you to connect the Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately) or Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately). Connect the optional equipment to the DOCK terminal of the subwoofer/system control using its dedicated cable.

When connecting the Yamaha iPod universal dock

When connecting the Yamaha Bluetooth wireless audio receiver

Connecting the power cable After you have made all connections, connect the power cable of the subwoofer/system control.

Hint

You can attach or detach the cover according to your preference after you have made all connections. Attach the cover to the rear panel of subwoofer/system control using the 6 supplied screws as shown.

DOCK

OPTICAL

COAXIAL

ANALOG

Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately)

DOCK

OPTICAL

COAXIAL

ANALOG

Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately)

SPEAKERS

MAINS

SPEAKER IMPEDANCE : 6 MIN.

To AC outlet

20 En

PREPARATION

E n g lish P R E P A R A T IO N
3 Inserting batteries into the remote control 1 Press on the battery cover and open the cover. 2 Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Insert the batteries according to the polarity markings (+ and ). 3 Close the battery cover. Replacing the batteries If the batteries run low, the effective operation distance of the remote control decreases considerably. If this happens, replace the batteries with two new ones as soon as possible. Notes Do not use an old battery together with new one. Do not use different types of batteries (for example, alkaline and manganese) together. Each type of battery has its own characteristics even if they are similar in shape. If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak. Dispose of the batteries according to the regional regulations. If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or clothing. Before inserting new batteries, wipe the compartment clean. Replace the batteries within two minutes to preserve the preset code in the remote control. Hint Remove the transparent sheet before using the remote control. Using the remote control Use the remote control within 6 m of the DVD controller and point it toward the remote control sensor. Basic operation of the remote control 1 Use the Input selection buttons on the remote control to select the input source you wish to control (for example DVD/USB). The selected source appears in the front panel display. When the button contains several input sources such as DVD/USB and INPUT 1-4 buttons, the input source switches each time you press the button. 2 Operate the desired function (for example, h or b / a). Notes Be careful not to spill liquid on the remote control. Be careful not to drop the remote control. Do not leave the remote control in the following places: hot or humid places, such as near a heater or in a bathroom extremely cold places dusty places To operate your TV with the remote control, you need to set the preset code. Refer to Setting the preset code on page 66 for how to change the preset code. GETTING STARTED 1 3 2 Press STANDBY / ON EJECT 30 30 ENTER TV/ STB CH Within 6 m TV VOL VOLUME TUNER MUTETV INPUT DVD/ USB INPUT 1-4 POSITION AREA SOUND TEST DOCK CH Input selection buttons

21 En

GETTING STARTED

Turn on the system Press STANDBY/ON on the DVD controller or the remote control. The LED indicators beside the disc loading slot light up when the system is turned on.

SLEEPNIGHTENHANCERSTEREO

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

STANDBY/ON

STANDBY / ON EJECT

Light up

22 En

GETTING STARTED P

R E

PA R

A T

IO N

E n

g lish

3

Setting the video input/output

Notes

Make sure that you have completed all the necessary connections (Refer to Connecting a TV on page 17).

If the settings you have selected are not appropriate, you can reset DVD settings to the initial factory settings (Refer to System menu on page 65).

1 Press DVD/USB repeatedly until DVD appears in the front panel display.

2 Turn on the TV and set to the correct video-in channel. You should see the background screen on the TV. Usually this channel is between the lowest and

highest channels and may be called FRONT, A/V IN or VIDEO. See your TV manual for more details.

Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.

Or, the TV remote control may have a button or switch that chooses different video modes.

Setting the TV display Set the aspect ratio of the DVD controller according to the TV you have connected. The format you select must be available on the disc. If it is not, the TV display setting will not affect the picture during playback.

1 Press SETUP on the remote control. DVD setup menu is displayed on the screen.

2 Press / / / on the remote control to highlight [Initial Settings], and then press ENTER.

3 Press / on the remote control to highlight [Video Output], and then press ENTER.

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

TV/ STB

CH

Play Mode

Initial Setting Disc Navigator

Video Adjust

Initial Setting

Video Output

Language

Display

Options

TV Screen 4:3 (Letter Box)

Component Out Interlace

HDMI Resolution 720x480p

HDMI Color Component

23 En

GETTING STARTED

4 Press / on the remote control to highlight [TV Screen], and then press ENTER.

5 Press / on the remote control to highlight one of the options below, and then press ENTER.

4:3 (Letter Box) Select this if you have a conventional TV. In this case, a wide picture with black bar on the upper and lower portions of the TV screen will be displayed.

4:3 (Pan&Scan) Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.

Note

If the disc does not support an aspect ratio of 4:3 (Pan&Scan), the content is displayed in 4:3 (Letter Box).

16:9 (Wide) Select this if you have a wide-screen TV.

16:9 (Compressed) Select this if a wide-screen TV is connected to the DVD controller with an HDMI cable, and set HDMI Resolution to either [1920 x 1080p], [1920 x 1080i], or [1280 x 720p]. When playing back a content whose aspect ratio is 4:3, black bars cover the sides of the screen.

Selecting the output type for COMPONENT VIDEO OUTPUT jacks To use progressive display function, connect to a TV, which has that function, via COMPONENT VIDEO OUTPUT jacks.

1 Press SETUP on the remote control.

2 Press / / / on the remote control to highlight [Initial Settings], and then press ENTER.

3 Press / on the remote control to highlight [Video Output], and then press ENTER.

4 Press / on the remote control to highlight [Component Out], and then press ENTER.

5 Press / on the remote control to highlight [Progressive] / [Interlace], and then press ENTER.

6 When the confirmation screen appears, press ENTER again. To cancel the setting, press RETURN.

Note

Do not select [Progressive] if your TV does not have a progressive display function. If your TV is also connected via HDMI OUTPUT terminal, the system may ignore this setting and output the progressive signal from COMPONENT VIDEO OUTPUT jacks.

Initial Setting

Video Output

Language

Display

Options

TV Screen 4:3 (Letter Box)

Component Out Interlace

HDMI Resolution 720x480p

HDMI Color Component

Initial Setting

Video Output

Language

Display

Options

TV Screen 4:3 (Letter Box)

Component Out Interlace

HDMI Resolution 720x480p

HDMI Color Component

24 En

GETTING STARTED P

R E

PA R

A T

IO N

E n

g lish

3

Setting language preferences You can select your preferred language settings so that this controller will automatically switch to your preferred language whenever you load a disc. If the language selected is not available on the disc, the discs default setting language will be used instead. The OSD (on-screen display) language for the DVD setup menu will remain as you set it, regardless of various disc languages.

On-screen display (OSD) language

1 Press SETUP on the remote control. DVD setup menu appears on the screen.

2 Press / / / on the remote control to highlight [Initial Settings], and then press ENTER.

3 Press / on the remote control to highlight [Display], and then press ENTER.

4 Press / on the remote control to highlight [OSD Language], and then press ENTER.

5 Press / on the remote control to select a language, and then press ENTER.

Audio, Subtitle and Disc menu languages

1 Press SETUP on the remote control. DVD setup menu appears on the screen.

2 Press / / / on the remote control to highlight [Initial Settings], and then press ENTER.

3 Press / on the remote control to highlight [Language], and then press ENTER.

4 Press / on the remote control to highlight the item below, and then press ENTER. Audio Language Subtitle Language DVD Menu Language

Hint

Refer to page 40 for the other items.

5 Press / on the remote control to select a language, and then press ENTER.

Initial Setting

Video Output

Language

Display

Options

OSD Language English

Angle Indicator On

Initial Setting

Video Output

Language

Display

Options

Audio Language English

Subtitle Language English

DVD Menu Lang. English

Subtitle Display On

25 En

BASIC OPERATIONS

This unit is designed for use with DVD, CD, Video CD, and Super Video CD, as well as DivX files and WMV files recorded on CD-R or DVD-R/DVD+R.

IMPORTANT! DVD discs and players are designed with regional

restrictions. Before playing a disc, make sure that the disc is for the same zone as your DVD controller.

Do not insert any objects other than discs into the disc loading slot. Doing so may cause the DVD controller to malfunction.

Depending on the disc, some functions may be prohibited.

This unit is not compatible with 8-cm discs.

Playing discs 1 Turn on the system.

2 Press DVD/USB repeatedly until DVD appears in the front panel display.

3 Turn on the TV power and set to the correct Video-in channel (Refer to Setting the video input/output on page 23). You should see the background screen on the TV.

4 Insert the disc into the disc loading slot.

5 Press h to start playback. If a disc menu appears on the TV, refer to Using the disc menu (DVD only) on page 28. If the disc is locked by parental lock function, you must enter your 4-digit password (Refer to Parental Lock on page 41).

Note

If you do the operation that is not available during playback, a message This operation cant be performed. or Depending on the disc, this operation may be prohibited. appears.

Playing DivX video/WMV files

DivX video file This unit can play DivX videos recorded on CD-R/RW, DVD-R/-RW, DVD+R/+RW discs. By default they will be played in alphabetical order. The supported files are shown below.

Plays all versions of DivX video (including DivX 6) with enhanced playback of DivX media files and the DivX media format.

The following filename extensions are supported .avi and .divx.

DISC OPERATION

STANDBY / ON EJECT

Displaying external subtitle files The font sets listed below are available for external subtitle files. You can see the proper font set on-screen by setting [Subtitle Language] to match the subtitle file.

Some external subtitle files may be displayed incorrectly or not at all.

For external subtitle files, the following subtitle format filename extensions are supported: .srt, .sub, .ssa, .smi

The filename of the movie file has to be repeated at the beginning of the filename for the external subtitle file.

The number of external subtitle files which can be switched for the same movie file is limited to a maximum of 10.

Group 1 Albanian (sq), Basque (eu), Catalan (ca), Danish (da), Dutch (nl), English (en), Faroese (fo), Finnish (fi), French (fr), German (de), Icelandic (is), Irish (ga), Italian (it), Norweigian (no), Portuguese (pt), Rhaeto-Romanic (rm), Scottish (gd), Spanish (es), Swedish (sv)

Group 2 Albanian (sq), Croatian (hr), Czech (cs), Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk), Slovenian (sl)

Group 3 Bulgarian (bg), Byelorussian (be), Macedonian (mk), Russian (ru), Serbian (sr), Ukrainian (uk)

Group 4 Hebrew (iw), Yiddish (ji)

Group 5 Turkish (tr)

26 En

DISC OPERATION B

A S

IC O

P E

R A

T IO

N S

E n

g lish

4

WMV file WMV content can be encoded by using Windows Media Encoder. The supported files are shown below.

The DVD controller is compatible with WMV9 files that are encoded by using the Windows Media Encoder 9 Series, with .wmv as an filename extension.

Compatible with size under 720 x 576 pixels/720 x 480 pixels.

The available maximum bit rate is about 2 to 3 Mbps. The maximum bit rate varies depending on the encode method.

Advanced Profile is not supported. DRM-Protected video files are not played in the

DVD controller.

Basic playback controls

To pause playback During playback, press e. To resume normal playback, press h.

To stop playback Press s.

To select track/chapter Press b / a to select previous/next track or chapter. You can enter a track/chapter number using Numeric keypad 0-9.

To search backward/forward Press w / f. To resume normal playback, press h. When searching, press w / f again to increase the search speed. (DVD, CD, and VideoCD only)

To playback in slow motion During pause, press and hold f to play back in slow motion. To resume normal playback, press h. During pause, press and hold w to play back in reverse slow motion. (DVD only)

Hint

During slow motion playback, press w / f to change the playback speed. (DVD, CD, and Video CD only)

To advance by frame During pause, press f to advance by frame. To resume normal mode, press h. During pause, press w to reverse by frame. (DVD only)

To adjust the volume level Press VOLUME +/ on the remote control or VOLUME u / d on the DVD controller. The volume level appears in the front panel display.

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO

PLAY MODE

MENUTOP MENU

ANGLE

CLEAR

MEMORY

LOCK

SUBTITLE

AUTO/ MANUAL

PRESET/CH

SRCH MODE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

When using Numeric keypad 0-9 Switch FUNC./10KEY to 10KEY

Numeric keypad 0-9

27 En

DISC OPERATION

Ejecting a disc Press s to stop disc playback, and then press EJECT on the DVD controller.

Note

Do not push the ejected disc when reloading it. To reload the ejected disc, press EJECT, or remove the disc from the disc loading slot fully, then insert it to the disc loading slot once again.

Using the disc menu (DVD only)

To display the disc menu Press TOP MENU to display the top-level disc menu. Press MENU to return to the main menu. The same menu as the top-level disc menu may appear depending on the disc.

Hint

Depending on the disc, a menu may appear on the TV screen once you load a disc.

The disc menu is displayed when you press TOP MENU during playing DivX files. (If available)

Note

Depending on the disc, these menus do not appear on the TV screen.

To select a playback feature or item Press / / / on the remote control, then press ENTER to start playback. You can also specify the number to select a feature or item. To enter a number, switch FUNC./10KEY to 10KEY.

Playback control (PBC) (Video CD only)

Some Video CD/super Video CD discs are compatibility with PBC function. PBC playback allows you to play Video CDs interactively, following the menu on the display.

To display the PBC menu When you insert a video CD or super video CD with PBC function and press h, playback starts with the function. During playback, press RETURN to display the menu. Press b / a to display the other menu on the previous/next page.

To select a track in PBC menu To select a track, switch FUNC./10KEY to 10KEY, enter the number, and then press ENTER.

Note

To disable PBC, press s twice, then press a. You can enter a track number using Numeric keypad 0- 9 instead of pressing a. To enable PBC again, press s twice, then press h to play back.

Changing soundtrack language While playing a DVD with multiple language soundtracks, press AUDIO repeatedly to select the language.

Notes

If you cancel the resume mode or eject the disc, the language gets back to the default setting.

When playing a Video CD, it switches 1/L (Left) and 2/R (Right).

You can change the soundtrack language by pressing AUDIO during playing DivX video files. (if available)

Depending on the disc, you can change the soundtrack language only in the disc menu.

STANDBY / ON EJECT

EJECT

28 En

DISC OPERATION B

A S

IC O

P E

R A

T IO

N S

E n

g lish

4

Changing subtitle language This operation works only on DVDs with multiple subtitle languages. You can change the language you want while playing a DVD. Press SUBTITLE repeatedly to select a language from the various subtitle languages.

Notes

If you cancel the resume mode or eject the disc, the language gets back to the default setting.

Depending on the disc, you can change the language only in the disc menu.

You can change the subtitle language by pressing SUBTITLE during playing DivX video files. (if available)

Resuming playback from the last stopped point

With the exception of VR format DVD-R/-RW discs, when you stop playback of a DVD, CD, or Video CD/ Super video CD or DivX video/WMV discs, RESUME appears in the front panel display indicating that you can resume playback again from that point.

With DVDs and Video CD/Super video CDs, if you eject the disc in the DVD controller after stopping playback, the last play position is stored in memory. If the next disc you load is the same one, Last Memory appears and playback will resume. For DVD-Video discs, the system stores the play position of the last five discs. When one of these discs is next loaded, you can resume playback.

Hints

To clear the resume point, press s again while RESUME is displayed.

If you dont need the Last Memory function when you stop a disc, you can press EJECT to stop playback and eject the disc.

Notes

Resume and Last Memory functions may not work with some discs.

As for CD and movie files (DivX/WMV), the resume point is cleared when the disc is ejected or the input is changed.

Viewing from another angle If the disc contains sequences recorded from different camera angles, the angle mark appears on the screen. Press ANGLE repeatedly to select the desired angle.

Hint

You can hide the angle mark (Page 41).

Displaying disc information Press ON SCREEN to display track, chapter and title information. Press ON SCREEN repeatedly to select the information.

Zooming in This function allows you to enlarge the picture double or quadruple of the original size. While playing a disc, press ZOOM once to double or twice to quadruple the size. You can move the zoom point using / / / . Press ZOOM one more time to return to the original size.

29 En

DISC OPERATION

Advanced operation When playing discs, you can use advanced operations such as repeat playback and programming playback. Use the menu to set them.

1 Press PLAY MODE on the remote control. Play Mode menu appears.

2 Use / to select playback function, then press ENTER. Setup for each items. Refer to the description below.

3 Press SETUP to return to the previous screen.

A-B repeat playback Select [A-B Repeat] in the Play Mode menu, then press ENTER. Specify the section according to the following procedure. Once you specify the section, repeat playback starts.

Notes

A-B repeat playback is not available for DivX Video/WMV discs.

You cannot specify the section that straddles tracks.

Repeat playback Select [Repeat] in Play Mode menu, then press ENTER. Select [Title Repeat]/[Chapter Repeat], then press ENTER at the point you want to repeat. Repeat playback starts. To exit the repeat playback, select [Repeat Off], then press ENTER.

Available repeat playback

Hint

You can use program playback with repeat playback. If program playback is active, you can select [Program Repeat].

Random playback Select [Random] in Play Mode menu, then press ENTER. When playing DVD, select [Random Title]/[Random Chapter], then press ENTER. When playing CD/Video CD, select [On], then press ENTER. To exit the random playback, select [Random Off], then press ENTER.

[A-B Repeat] Repeats a specific section between A and B

[Repeat] Repeats title/chapter/disc/track

[Random] Plays titles/chapters/tracks randomly

[Program] Plays titles/chapters/tracks in the order you want

[Search Mode] Plays a specific chapter/track/time that you want to play

PLAY MODE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

CLEAR

MEMORY

LOCK

AUTO/ MANUAL

PRESET/CH

ENTER

SRCH MODE

Play Mode

A-B Repeat

Repeat

Random

Program

Serch Mode

A (Start Point)

B (End Point)

Off

Starting point: Select [A (Start)], then press ENTER at the point you want to start repeating.

End point: Select [B (End point)], then press ENTER at the point you want to end repeating.

Exiting repeat playback: Select [OFF], then press ENTER.

DVD: [Title Repeat], [Chapter Repeat]

CD/Video CD: [Disc Repeat], [Track Repeat]

DivX/WMV: [Title Repeat], [Chapter Repeat] (if supported)

30 En

DISC OPERATION B

A S

IC O

P E

R A

T IO

N S

E n

g lish

4

Program playback Select [Program] in the Play Mode menu, then press ENTER. When playing a DVD, you can program the order the titles/chapters are played back. When playing a CD/Video CD, you can only program the order the tracks are played back.

Programming the playback order Select [Create/Edit] and press ENTER to open program list to set the playback order. Use / / / and ENTER to program the order. You can store up to 24 steps. Each time you press ENTER, the step moves to the next. Use the same procedure to complete the programming.

Hints

To remove the step, press CLEAR on the step. To add a step in the middle of the list, select a title/

chapter/track. If you press SETUP after programming, program

playback is canceled. To do the program play back again, enter [Program] again.

Starting/Stopping program playback In program mode, press h to start program playback. Press s to stop the program playback. During program playback, press b / a to skip to the next or previous programmed title/chapter/track.

Hint

You can also start/stop program playback by selecting [Playback Start]/[Playback Stop].

Deleting the program order Select [Program Delete] in the menu, then press ENTER.

Using search mode Select [Search Mode] in Play Mode menu, then press ENTER. Select the item you want to search, then enter a title/ chapter/track number using Numeric keypad 0-9. Press ENTER to start playback.

Search mode types

You can select [Time Search] during playback. Enter a 4- digit number to specify the minutes and seconds. For example, to specify 32 minutes and 20 seconds, enter 3220. To specify 1 hour, 25 minute, and 40 second, enter 8540.

Program

Program Step 01. 02. 03. 04. 05. 06. 07. 08.

Track 1-14 Track 01 Track 02 Track 03 Track 04 Track 05 Track 06 Track 07 Track 08

Total Time 000.00

DVD: [Title Search], [Chapter Search], [Time Search]

CD/Video CD: [Track Search], [Time Search]

DivX/WMV: [Time Search], [Chapter Search] (if supported)

31 En

DISC OPERATION

Disc navigator When playing DVD or Video CD, you can display a list of titles and tracks using disc navigator.

1 Press SETUP on the remote control. DVD setup menu appears.

2 Press / / / to highlight [Disc Navigator], then press ENTER.

3 Select the item that you want to display in a list, then press ENTER. The available items vary depending on the disc that you are loading.

Hints

Select [Time] to display an image from every 10 minutes.

Original means the titles recorded on a DVD recorder. Playlist means the titles arranged based on Original.

4 Select a number, then press ENTER to start playback. 6 titles/chapters/tracks will be displayed on the screen. Press b / a to display the next/previous page. You can select the number either from the menu or remote control.

DVD-Video: [Title], [Chapter]

DVD-R/-R DL/-RW (VR format):

[Original: Title], [Original: Time], [Playlist: Title], [Playlist: Time]

Video CD: [Track], [Time]

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

TV/ STB

Play Mode

Initial Setting Disc Navigator

Video Adjust

01

04 05 06

02 03

32 En

B A

S IC

O P

E R

A T

IO N

S E

n g

lish

4

This system can play audio files and picture files recorded on CD-R or DVD-R/DVD+R, etc.

Note

The files and folders may not be recognized if the disc is in the following condition. There are 299 or more folders in a disc. There are 648 or more files or subfolders in a folder.

Compressed audio file MPEG1 audio layer3 (MP3) Windows Media Audio (WMA) MPEG-4 AAC

Hints

The available sampling frequency is 32/44.1/48 kHz.

The recommended bit rate for MP3/WMA is 128 kbps or higher.

The supported bit rate for MPEG-4 AAC is between 16 and 320 kbps.

The following filename extensions are supported. .mp3 or .MP3 (for MP3 files), .wma or .WMA (for WMA files), .m4a (for MPEG-4 AAC)

Notes

Files that are encoded in VBR (Variable Bit Rate) cannot be played.

Files that are encoded in loss-less format cannot be played.

DRM copy-protected files cannot be played. Encode the WMA files with an application that is

certified by Microsoft Corporation. If not, the files may not play back correctly.

MPEG-4 AAC files encoded with iTunes are supported. Those files may not play back correctly depending on the version of iTunes.

Still image file JPEG FUJICOLOR CD KODAK Picture CD

Hints

This unit is compatible with JPEG images that are 3072 x 2048 pixels or less.

This unit supports the files that are compliant with Exif (Exchangeable Image File Format) version 2.2.

The image file must have the file name extension .jpg or .JPG.

Note This unit does not support progressive JPEG images.

To play back audio files The audio files recorded on the disc are played back.

1 Insert the disc that contains audio files.

2 Press h, and playback starts. During the playback, you can use the following operations.

3 Press s to stop.

PLAYING OTHER DISCS

e Pauses the slide show. When playing a disc with audio files, it pauses the music.

b / a Plays the previous/next track.

ON SCREEN Displays the track information on the TV display.

AUDIO DELAY

AUDIO

PLAY MODE

MENUTOP MENU

ANGLE

CLEAR

MEMORY

LOCK

SUBTITLE

AUTO/ MANUAL

PRESET/CH

SRCH MODE

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

33 En

PLAYING OTHER DISCS

To start a slide show of JPEG files

JPEG files recorded on the disc are played back in order in slide show. During the slide show, you can play back all JPEG files in the disc in order.

Hints

If the disc contains several folders, the pictures in each folders are displayed in alphabetical order.

If the disc contains both JPEG files and compressible audio files, you can enjoy the music during the slide show.

1 Insert a the disc that contains JPEG files.

2 Press h. The slide show starts. During the slide show, you can do the following operations.

3 Press s to stop the slide show.

Selecting a file to play back You can select a file that you want to play back using Disc Navigator.

1 Press SETUP after inserting the disc you want to play back. The DVD setup menu appears on the screen.

2 Select [Disc Navigator], then press ENTER. Disc Navigator is opens.

3 Press / to select the file you want to play back. If you select a JPEG file, the preview image appears in the right window.

To move to the one lower folder Select the folder, then press or ENTER.

To move to the one upper folder Press . You can also move by selecting the [. .] folder.

4 Press ENTER to play back the selected file/folder.

When playing audio/movie files Playback starts from the selected file and plays the files in the folder.

When playing JPEG files The slide show starts from the selected file and plays the files in the folder.

Hint

When the disc contains both audio files and JPEG files, play back an audio file first, then play back the pictures to enjoy the music during the slide show. In this case, e and b / a is used for JPEG files.

5 Press s to stop playback.

e Pauses the slide show. When playing a disc with audio files, it pauses the music.

b / a Move to the previous/next picture. When playing a disc with audio files, it plays the previous/next song.

/ / / Pauses the slide show to rotate or flip the picture. Press h to restart the slide show.

ZOOM Pauses the slide show to enlarge the picture. Each time you press the key, the picture size doubles, quadruples, and then returns to normal. Press h to restart the slide show.

MENU Displays Disc Navigator.

AUDIO DELAY

AUDIO

PLAY MODE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

ANGLE

CLEAR

MEMORY

LOCK

SUBTITLE

AUTO/ MANUAL

PRESET/CH

ENTER

SRCH MODE

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

folder_1

folder_2

folder_3

folder_4

folder_5

folder_6

\

00:00 00:00 0kbps

34 En

PLAYING OTHER DISCS B

A S

IC O

P E

R A

T IO

N S

E n

g lish

4

Using a USB device You can play back audio files, and picture files saved on your USB devices.

Supported USB devices The DVD controller supports USB mass storage class devices (e.g., flash memories, card readers, portable audio players) using FAT16 or FAT32 format.

Notes

Some devices may not work properly even if they meet the requirements.

If USB ERROR or NO USB appears in the front panel display, see the following methods. Set the system to the standby mode, and then

turn it on again. Disconnect the device when the DVD controller

is in the standby mode, then connect it again and turn on the DVD controller.

Set the input source to USB, then remove and insert the USB device.

Select the input source other than USB, then Set it back to USB again.

Connect the AC adapter if the adapter is supplied with the device.

If the electrical power consumption of the USB device is high, the USB device may not be used correctly.

Do not connect devices other than USB mass storage class devices: USB chargers, USB hubs, PCs, etc.

Playing data files Yamaha and suppliers accepts no liability for the loss of data saved on the USB devices connected to the DVD controller. As a precaution, it is recommended that the files are tested after they have been saved on.

1 Press DVD/USB repeatedly until USB appears in the front panel display.

2 Connect your USB device to the USB terminal of the DVD controller.

3 Start playback in either of the following ways.

When playing back all files in a USB device Press h to start playback.

When playing back the selected files Press MENU to open Disc Navigator. Press / / / to select files, then press h. Refer to page 34 for how to select files.

4 Press s to stop playback. Before you remove the USB device, select an input source other than USB.

Note

When the input source is USB, you cannot open the DVD setup menu.

USB

INPUT

USB device

35 En

DVD SETUP MENU

Menu overview [Video Adjust] menu Adjusts the picture quality. The bold items/parameters listed below are the default settings.

[Initial Settings] menu Make advanced settings. The bold items/parameters listed below are the default settings.

* Depending on the disc, NTSC and PAL switches automatically. For U.S.A. and Canada models, only NTSC is available.

Notes

Refer to page 30 for [Play Mode] Refer to page 32 for [Disc Navigator]

DVD SETUP MENU OPTIONS

Menu Item Setting item/Parameter Sharpness Fine, Standard, Soft

Brightness 20 0 +20

Contrast 16 0 +16

Gamma High, Medium, Low, Off

Hue green 9 0 red 9

Chroma Level 9 0 +9

Menu Item Setting Item Parameter Page

Video Output

TV Screen 4:3 (Letter Box), 4:3 (Pan&Scan), 16:9 (Wide), 16:9 (Compressed)

38

Component Out Progressive, Interlace 38

HDMI Resolution 1920x1080p, 1920x1080i, 1280x720p, 720x480p*/720x576p*, 720x480i*/720x576i*

39

HDMI Color Full range RGB, RGB, Component 39

Language

Audio Language English, French, German, Italian, Spanish, Other Language

40

Subtitle Language English, French, German, Italian, Spanish, Other Language

40

DVD Menu Lang. W/ Subtitle Lang., English, French, German, Italian, Spanish, Other Language

40

Subtitle Display On, Off 40

Display OSD Language English, Franais, Deutsch, Italiano, Espaol 41

Angle Indicator On, Off 41

Options Parental Lock Password, Level Change, Country Code 41

DivX(R) VOD Display 42

36 En

D V

D S

E T

U P

M E

N U

E n

g lish

5

This setup is carried out via the TV, enabling you to customize the DVD controller to suit your particular requirements

1 Press DVD/USB repeatedly to switch the input source to DVD.

2 Press SETUP on the remote control. DVD setup menu appears.

3 Press / / / to highlight [Video Adjust], then press ENTER.

4 Select the item that you want to adjust, press ENTER, and then press / / / to adjust the image quality. You can adjust the following items in Video Adjust menu.

[Sharpness] Select this to adjust the sharpness. Choose from Fine/ Standard/Soft.

[Brightness] Increase or decrease the value to adjust the brightness. You can adjust the value from -20 to +20 using / .

[Contrast] Increase or decrease the value to adjust the sharpness. You can adjust the value from -16 to +16 using / .

[Gamma] Select this to adjust the darkness. Choose from High/ Medium/Low/Off.

[Hue] Select this to adjust the balance of green and red. You can adjust the value from Green 9 to Red 9 using / .

[Chroma Level] Select this to adjust the color density. You can adjust the value from 9 to +9 using / .

5 Press ENTER to confirm. Repeat steps 3 and 4 if necessary.

6 Press SETUP to close the menu.

Hints

Once you confirm the values, you can select other items in Video Adjust menu.

If the settings you have selected are not appropriate, you can reset DVD settings to the initial factory settings (Page 65).

Note ]

The sharpness setting does not affect the HDMI signal.

VIDEO ADJUST MENU

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

TV/ STB

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

Play Mode

Initial Setting Disc Navigator

Video Adjust

Sharpness

Brightness

Contrast

Gamma

Hue

Chroma Level

Fine

Standard

Soft

Video Adjust

37 En

This setup is carried out via the TV, enabling you to customize the DVD controller to suit your particular requirements

1 Press DVD/USB repeatedly to switch the input source to DVD.

2 Press SETUP on the remote control. DVD setup menu appears.

3 Press / / / to highlight [Initial Settings], then press ENTER.

4 Press / to highlight the item that you want to adjust, then press ENTER. Refer to the following explanations.

5 Press ENTER to confirm. Repeat steps 3 and 4 if necessary.

6 Press SETUP to close the menu.

Hint

If the settings you have selected are not appropriate, you can reset DVD settings to the initial factory settings (Page 65).

Video Output Configure the video output settings.

TV Screen Set the aspect ratio according to the TV you have connected.

[4:3 (Letter Box)] (default) Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed.

[4:3 (Pan&Scan)] Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.

Note

If the disc does not support an aspect ratio of 4:3 (Pan&Scan), the content is displayed in 4:3 (Letter Box).

[16:9 (Wide)] Select this if you have a wide-screen TV.

[16:9 (Compressed)] Select this if a wide-screen TV is connected to the DVD controller with an HDMI cable, and set HDMI Resolution to either [1920 x 1080p], [1920 x 1080i], or [1280 x 720p]. When playing back a content whose aspect ratio is 4:3, black bars cover the sides of the screen.

Component Out Select the video type output via the COMPONENT VIDEO OUTPUT jacks.

[Progressive] Select this if the connected TV has progressive display function. When you select this and press ENTER, the confirmation screen appears. Press ENTER again to confirm the setting. If you want to cancel the setting, press RETURN.

INITIAL SETTINGS MENU

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO ANGLESUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

TV/ STB

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

When using Numeric keypad 0-9 Switch FUNC./10KEY to 10KEY

Numeric keypad 0-9

Initial Setting

Video Output

Language

Display

Options

TV Screen 4:3 (Letter Box)

Component Out Interlace

HDMI Resolution 720x480p

HDMI Color Component

38 En

INITIAL SETTINGS MENU D

V D

S E

T U

P M

E N

U E

n g

lish

5

[Interlace] (default) Select this if the connected TV does not have progressive display function.

Notes

Do not select [Progressive] if the connected TV does not have progressive display function.

If your TV is also connected via HDMI OUTPUT terminal, the progressive signal may be output from the COMPONENT VIDEO OUTPUT jacks.

HDMI Resolution Set the resolution output via the HDMI OUTPUT terminal. Select the resolution and press ENTER, and a message appears on the screen. Select [YES] to confirm. The available values are shown below.

[1920 x 1080p] Select this if the connected TV is designed for progressive 1920 x 1080 resolution. 1080p/60Hz (NTSC) 1080p/50Hz (PAL)

[1920 x 1080i] Select this if the connected TV is designed for interlaced 1920 x 1080 resolution. 1080i/60Hz (NTSC) 1080i/50Hz (PAL)

[1280 x 720p] Select this if the connected TV is designed for progressive 1280 x 720 resolution. 720p/60Hz (NTSC) 720p/50Hz (PAL)

[720 x 480p] / [720 x 576p] (default) Select this if the connected TV is designed for progressive 720 x 480 (NTSC color system)/720 x 576 (PAL color system) resolution. 480p/60Hz (NTSC) 576p/50Hz (PAL)

[720 x 480i] / [720 x 576i] Select this if the connected TV is designed for interlaced 720 x 480 (NTSC color system)/720 x 576 (PAL color system) resolution. 480i/60Hz (NTSC) 576i/50Hz (PAL)

Notes

Depending on the disc, NTSC and PAL switches automatically. For U.S.A. and Canada models, only NTSC is available.

When you change the resolution, the screen may be distorted or take some time to be displayed.

If the screen is not displayed correctly, reset HDMI resolution to the initial setting (Page 65).

HDMI Color Set the color output for the HDMI component.

[RGB Full Range] Reproduces bright white and deep black colors. Select this if the image reproducibility is poor.

[RGB] Select this to lower the intensity of the picture when you selected RGB Full Range.

[Component] Select this to set the standard component video output format of the HDMI component.

Note

The default setting varies depending on your HDMI component.

39 En

INITIAL SETTINGS MENU

Language These menus contain various language options for the audio, subtitle and disc menus recorded on the DVD. For details, Refer to DISC OPERATION on page 26.

Notes

Depending on the disc, the language set on the DVD controller may not play.

If the disc does not contain the language that you set on the DVD controller, it may play in another in language.

Audio Language Selects an audio language.

[English] (default), [French], [German], [Italian], [Spanish] The selected language is used as a default audio setting.

[Other Language] Selects an audio language from 136 languages. Once you select this item and press ENTER, you can select a language in List of Languages or Code. Refer to LIST OF LANGUAGE CODES on the appendix for the corresponding codes.

Subtitle Language Select the subtitle language.

[English] (default), [French], [German], [Italian], [Spanish] The selected language is used as a default subtitle setting.

[Other Language] Selects a subtitle language from 136 languages. Once you select this item and press ENTER, you can select a language in List of Languages or Code. Refer to LIST OF LANGUAGE CODES on the appendix for the corresponding codes.

DVD Menu Lang. Selects an displaying language for the DVD menu.

[W/ Subtitle Lang.] (default) Displays the menu in the language selected in [Subtitle Language].

[English], [French], [German], [Italian], [Spanish] Displays the menus in the selected language.

[Other Language] Selects an audio language from 136 languages. Once you select this item and press ENTER, you can select a language in List of Languages or Code. Refer to LIST OF LANGUAGE CODES on the appendix for the corresponding codes.

Subtitle Display Switch the subtitles On/Off.

[On] The subtitles are displayed.

[Off] The subtitles are not displayed.

Initial Setting

Video Output

Language

Display

Options

Audio Language English

Subtitle Language English

DVD Menu Lang. English

Subtitle Display On

40 En

INITIAL SETTINGS MENU D

V D

S E

T U

P M

E N

U E

n g

lish

5

Display Set the screen display for the DVD controller.

OSD Language Selects a language for the DVD setup menu.

[English] (default), [Franais], [Deutsch], [Italiano], [Espaol] Displays the DVD setup menu in the selected language.

Angle Indicator Switches the angle mark on/off. If the disc contains sequences recorded from different camera angles, the angle mark appears on the screen. Press ANGLE repeatedly to select the desired angle.

[On] The angle mark is displayed when the disc contains multi- angles.

[Off] The angle mark is not displayed even if the disc contains multi-angles.

Options You can set other items such as parental lock.

Parental Lock Some DVDs may have a parental lock level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playback of certain discs that are not suitable for your children, or play alternative scenes for certain discs.

[Password] Set a password to use for the parental lock function. You need to enter the password to cancel the parental lock.

1 To set a password, select [Password] and press ENTER.

2 Use Numeric keypad 0-9 on the remote control to enter a 4-digit number, then press ENTER to confirm.

Hint

When you play a DVD that is restricted by a parental lock, a screen requiring a password to be input appears. Use Numeric keypad 0-9 to enter the password.

Notes

Keep the password secure. If you forget the password, resets the DVD settings

to the factory defaults, and set it again. For details, refer to System menu on page 65.

Initial Setting

Video Output

Language

Display

Options

OSD Language English

Angle Indicator On

Initial Setting

Video Output

Language

Display

Options

Parental Lock Off

DivX(R) VOD

41 En

INITIAL SETTINGS MENU

[Password Change] Once you set a password, the item name changes to [Password Change]. If you select [Password Change], you can change the password.

1 Select [Password Change] to change the password, then press ENTER.

2 Use Numeric keypad 0-9 on the remote control to enter the password that you have set before, then press ENTER.

3 Enter a new password using Numeric keypad 0-9, then press ENTER.

[Level Change] You can change the parental lock level.

1 Select [Level Change], then press ENTER.

2 Use Numeric keypad 0-9 on the remote control to enter a password, then press ENTER to confirm.

3 Press / to change the parental lock level, then press ENTER.

[Country Code] You can change the country code. Refer to appendix at the end of this manual.

1 Select [Country Code], then press ENTER.

2 Use Numeric keypad 0-9 on the remote control to enter a password, then press ENTER to confirm.

3 Press / to change the parental level, then press ENTER. You can enter country code using Numeric keypad 0-9.

Note

When you change the country code, eject the disc once. Reinsert the disc to apply the settings.

DivX(R) VOD Yamaha provides you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, go to www.divx.com/vod.

Notes

If you try to play files without an authorized registration code, a message Authorization Error appears and the file does not start.

If a file has a play time limit, the number of remaining plays is displayed on the screen.

You may need to show the registration code of this unit to the delivery site. You can check the registration code as shown below.

1 Select [DivX(R) VOD], then press .

2 Select [Display], then press ENTER. The registration code is displayed.

Initial Setting

Video Output

Language

Display

Options

DivX(R)Video On Demand

Your registration code is : XXXX

To learn more visit www.divx.com/vod

Done

Registration code

42 En

OTHER FUNCTIONS

E n g lish O T H E R F U N C T IO N S
6 What is AIR SURROUND XTREME? Ordinarily, two speakers, a center speaker, two surround speakers, and a subwoofer are necessary for enjoying 5.1 channel surround sound. Virtual 7.1 channel The AIR SURROUND XTREME technology, using only the left and right speakers of the this system and subwoofer, enables you to enjoy a realistic 7.1 channel sound by simulating sound from virtual speakers at center, surround, and surround backs. C: Center virtual speaker FR, FL: Front speaker SW: Subwoofer SR, SL: Surround virtual speaker SBR, SBL: Surround back virtual speaker You can check the virtual surround effect and adjust the volume balance according to your preference and the characteristics of your listening room. Refer to the following pages for details. Checking the virtual surround effect. (Page 45) Adjusting the volume balance. (Page 64) Listening to surround mode of AIR SURROUND XTREME Press one of the surround mode buttons. The names of the selected input source and the selected surround mode appear in the front panel display. Surround mode descriptions MOVIE This mode is useful when you listen to a movie soundtrack on media such as DVDs, etc. MUSIC This mode is useful when you listen to music on media such as DVDs, etc. SPORTS This mode is useful when you enjoy sports or TV news programs. GAME This mode is useful when you play video games. Hints To reproduce the original sounds, press STEREO. The system automatically memorizes the settings assigned to each input source. When you select another input, the system automatically recalls the last settings for the selected input. AIR SURROUND XTREME Typical 5.1 channel speaker system Front speakers Subwoofer Center speaker Surround speakers Sw The sound image of the system SLEEPNIGHTENHANCER AUDIO DELAY STEREO ON SCREENZOOMDISP. MODE GAMESPORTSMUSIC FUNC. WP87010DVX-700 TV STB POWERSTANDBY/ON 10KEY MOVIE Switch FUNC./10KEY to FUNC. Surround mode buttons MOVIE

43 En

AIR SURROUND XTREME

Shifting the optimum listening area from side to side

This function shifts the optimum listening area from side to side according to your listening position for the best Virtual Surround effect.

1 Press POSITION to enter position mode. The current position appears in the front panel display.

2 Press / to shift the optimum listening area (L6, L5, L4, L3, L2, L1, CENTER, R1, R2, R3, R4, R5, R6). Adjust the optimum listening area from L1 to L6 when your listening position is to the left side of the center position, and adjust the optimum listening area from R1 to R6 when your listening position is to the right side of the center position. The position appears in the front panel display.

3 Press POSITION again or ENTER to exit position mode.

Hints

The default setting is CENTER. If you press TEST after performing step 1, the

system outputs the test tone for a virtual center speaker so that you can adjust the position setting. (Page 45)

The setting is set for all the input sources. This function is available even when surround

mode is off.

Note

If you do not operate this function within 30 seconds after entering position mode, the system automatically exits position mode.

Selecting the optimum distance between the speakers

The surround effect will be changed depending on the speaker positions. You can set the optimum distance area to enjoy the best surround effect at your listening position.

1 Press AREA when the surround mode is activated. The mode switches to the area setting mode. The current setting appears in the front panel display.

2 Use / to select one of the following area.

Hints

The default setting is NORMAL. When you select WIDE, slightly turn the speakers

toward the listening position to get the better surround effect.

3 Press AREA or ENTER to apply the setting.

The optimum listening area

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

TV/ STB DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

POSITION R3

NARROW: Select this when the distance between the speakers is about 80 cm.

NORMAL: Select this when the distance between the speakers is about 120 cm.

WIDE: Select this when the distance between the speakers is about 200 cm.

80cm (32")

120cm (48")

200cm

NARROW

NORMAL

WIDE

32"

42"

Over 42"

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

TV/ STB DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

AREA NORMAL

44 En

AIR SURROUND XTREME O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Hint

This function is available when the surround mode or extended stereo mode is on. If you do not operate this function within 30 seconds after entering area setting mode, the setting automatically exits area setting mode.

Checking the virtual surround effect

You can check the virtual surround effect using test tones produced from the speakers.

1 Press TEST to output the test tone.

2 The system outputs the test tone and the output channel of the test tone appears in the front panel display.

The output channel of the test tone cycles through as follows. Each channel outputs the test tone for about 2 seconds.

3 To cancel test tone mode, press TEST again.

Note

The surround back virtual speaker is included in SL and SR.

Using extended stereo mode An extended sound is achieved for a 2 channel source such as a CD player.

Press STEREO to activate extended stereo mode. EXTENDED appears in the front panel display.

Each time you press STEREO, the function is turned on (EXTENDED) and off (STEREO) alternately.

Hints

The default setting is STEREO. The system memorizes the settings assigned to

each input source. You can also turn on compressed music enhancer

mode when extended stereo mode is turned on.

Note

This operation is only available when the surround mode is not activated.

Setting compressed music enhancer

This function enhances your listening experience by regenerating the missing harmonics in a compression artifact. This is useful when you play back compressed music data stored on an iPod or a digital music player.

Press ENHANCER. The ENHANCER indicator lights up in the front panel display when this function is turned on. Each time you press ENHANCER, the function is turned on and off alternately. The selected mode is stored in memory even when the system is in the standby mode.

Hints

The default setting is OFF. The system memorizes the settings assigned to

each input source. When this function is on, night listening mode is

automatically set to off.

DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

TEST:L

Active (virtual) speaker channel

L C R

SW SL SR

SLEEPNIGHTENHANCER

AUDIO DELAY

STEREO

ON SCREENZOOMDISP. MODE

GAMESPORTSMUSIC

FUNC. 10KEY

MOVIE

EXTENDED

SLEEPNIGHTENHANCER

AUDIO DELAY

STEREO

ON SCREENZOOMDISP. MODE

GAMESPORTSMUSICMOVIE

45 En

Make sure that the FM antenna is connected to the subwoofer/system control when using the tuner

You can use two tuning modes to tune into the desired FM station:

Frequency tuning mode You can search or specify the frequency of the desired FM station automatically or manually.

Preset tuning mode You can preset the desired FM stations in advance, and then recall the station by specifying the preset group and number.

Basic tuning operation

1 Press TUNER repeatedly to set the input source to FM. FM appears in the front panel display.

2 Press AUTO/MANUAL to switch automatic tuning mode.

The AUTO indicator lights up when the system is set to automatic tuning mode.

3 Press PRESET/CH / once to begin automatic tuning. When the system is tuned to a station, the TUNED indicator lights up and the frequency of the received station is shown in the front panel display.

Hint

When you tune in an FM station using automatic tuning mode, the system receives the FM radio signal in stereo reception mode. The STEREO indicator appears in the front panel display.

LISTENING TO FM BROADCASTS

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO ANGLESUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

PTY SEEK

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

FREQ / TEXT

MEMORY

STARTLOCK

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4 DOCK

When using Numeric keypad 0-9 Switch FUNC./10KEY to 10KEY

Numeric keypad 0-9

FM

Manual tuning If the signal received from the station you want to select is weak, you can tune into the desired station by specifying the frequency manually. In FM tuning mode, press AUTO/MANUAL repeatedly so that the AUTO indicator disappears, and then press PRESET/ CH / repeatedly to specify the frequency of the desired station. If you tune into a station using the manual tuning feature, the system receives the FM radio signals in monaural reception mode to increase signal quality.

A FM 88.9 MHz

Lights up

A FM 89.1 MHz

Lights up

46 En

LISTENING TO FM BROADCASTS O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Using station preset feature You can store up to 40 stations (A1 to E8: 8 preset numbers in each of the 5 preset groups).

Automatic station preset Available radio stations are automatically tuned in. You can set all available stations to a preset group at the same time by using automatic preset.

Note

Only radio stations with sufficient signal strength are set by automatic preset. If a radio stations signal is weak, set it by using manual preset tuning.

1 Press TUNER repeatedly to set the input source to FM. FM appears in the front panel display.

2 Press and hold MEMORY for more than 3 seconds. The preset group and number as well as the MEMORY and AUTO indicators flash. After approximately 5 seconds, automatic presetting starts from the current frequency and proceeds through higher frequencies.

Press MEMORY again to cancel while the MEMORY indicator is flashing.

Hint

Press A-E/CAT. / to select a preset group, and then press PRESET/CH / . repeatedly to select a preset number to which the first station will be stored after you perform step 2.

Direct frequency tuning Use this feature to tune into the desired station directly by entering the frequency.

1 Press TUNER to set the input source to FM.

2 Press AUTO/MANUAL to select automatic tuning mode or manual tuning mode.

3 Use Numeric keypad 0-9 to specify a radio frequency. For example, enter 1037 using Numeric keypad 0-9 to specify 103.7 MHz.

Hint

If the entered frequency is out of the range of the FM tuning, WRONG STATION! appears in the front panel display and then this unit automatically tunes into the last selected station.

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

MEMORYAUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4 DOCK

A1:FM 88.9 MHz

Flashes

Flashes

47 En

LISTENING TO FM BROADCASTS

Notes

Any stored station data existing under a preset number is cleared when you store a new station under the same preset number.

If the number of received stations does not reach 40 (A1 to E8), automatic preset tuning automatically stops after searching for all the available stations.

Manual station preset Use this feature to store the radio stations manually.

1 Tune into a station. Refer to Basic tuning operation on page 46 for the details.

2 Press MEMORY. The MEMORY indicator flashes in the front panel display for approximately 30 seconds. Press MEMORY again to cancel while the MEMORY indicator is flashing.

3 Press A-E/CAT. / repeatedly to select a preset group (A to E) while the MEMORY indicator is flashing. The selected preset group appears.

4 Press PRESET/CH / to select a preset number (1 to 8) while the MEMORY indicator is flashing.

5 Press MEMORY to confirm the preset.

After A1:PRESET OK appears in the front panel display, the frequency appears with the preset group and number you selected. The MEMORY indicator disappears from the front panel display.

If the desired station is not stored, or a station is not stored to the desired preset group and number, preset the station manually. Refer to Manual station preset for details.

A :FM 88.9 MHz

Flashes

A :FM 88.9 MHz

Flashes

Preset group

A1:FM 88.9 MHz

Flashes

Preset number

A1:PRESET OK

A1:FM 88.9 MHz

The displayed station has been stored as A1.

48 En

LISTENING TO FM BROADCASTS O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Notes

Any stored station data existing under a preset number is cleared when you store a new station under the same preset number.

The reception mode (stereo or monaural) is stored along with the station frequency.

Recalling the preset stations If you have stored the preset stations based on Presetting radio stations, you can recall them using the following procedures.

1 Press TUNER on the remote control. FM appears in the front panel display.

2 Press PRESET/CH to select preset tuning mode.

Hint

If a colon(:) appears, the system is set to preset tuning mode.

3 Use A-E/CAT. / to select the preset group (A to E).

4 Use PRESET/CH / to select the preset number you want (1 to 8).

Hint

You can specify the preset number using Numeric keypad 0-9 by switching FUNC./10KEY to 10KEY.

A1:FM 88.9 MHz

Preset FM station

Preset group and number

49 En

XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan.

Connecting XM Mini-Tuner Home Dock

Connect XM Mini-Tuner and XM Mini-Tuner Home Dock (sold separately) to the XM terminal on the rear panel of subwoofer/system control. For details, see the operating instructions provided with the XM Mini-Tuner Home Dock.

Hint

To ensure optimal reception of the XM Satellite Radio signals, the XM Mini-Tuner Home Dock must be placed at or near a southerly facing window with no obstacles in the path to the sky. You can mount it indoors or outdoors. Use the ANTENNA INFO information in the front panel display to check the antenna reception level and adjust the orientation of the antenna.

Notes

If CHECK ANTENNA or CHECK XM TUNER appears in the front panel display, the connection and setting of the antenna, XM Mini- Tuner Home Dock, or XM Mini-Tuner may not be correct.

If UPGRADE and XM TUNER appear in sequence in the front panel display, the connected XM Mini-Tuner is incompatible with this unit.

Activating XM Satellite Radio Once you have installed the XM Mini-Tuner Home Dock, inserted the XM Mini-Tuner, connected the XM Mini- Tuner Home Dock to your XM Ready home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. There are three places to find your eight characters XM Radio ID: On the XM Mini-Tuner, on the XM Mini-Tuner package, and on XM Channel 0. Record the XM Radio ID in the following eight squares for reference.

Note

The XM Radio ID does not use the letters I, O, S or F. Activate your XM Satellite Radio service in the U.S. online at http://activate.xmradio.com/ or call 1-800-XM-RADIO (1-800- 967-2346). Activate your XM Satellite Radio service in Canada online at https://activate.xmradio.ca/ or call 1-877-GET-XMSR (1-877-438-9677). You will need a major credit card. XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods you may need to keep your XM Ready home audio system on for up to an hour. When you can access the full lineup on your XM Ready home audio system you are done.

LISTENING TO XM SATELLITE RADIO BROADCASTS

XM Satellite Radio online information For U.S. customers: http://www.xmradio.com/ For Canadian customers: http://www.xmradio.ca/

XM READY legal disclaimer XM monthly service subscription sold separately. XM Mini-Tuner and Home Dock required (each sold separately) to receive XM service. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate or otherwise make available any technology or software incorporated in receivers compatible with the XM Satellite Radio System. Installation costs and other fees and taxes, including a one-time activation fee may apply. All fees and programming subject to change. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1-800-XMRADIO (U.S. residents) and 1- 877-GETXMSR (Canadian residents). XM service only available in the 48 contiguous United States and Canada. 2008 XM Satellite Radio Inc. All rights reserved.

SIRIUS

XM

XM Mini-Tuner and XM Mini-Tuner Home Dock (sold separately)

50 En

LISTENING TO XM SATELLITE RADIO BROADCASTS O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Basic XM Satellite Radio operations

1 Press TUNER repeatedly to select XM as the input source. The XM indicator lights up in the front panel display and the XM Satellite Radio information (such as channel number, channel name, category, and artist name/song title) for the currently selected channel appears in the front panel display.

Hint

When you select XM as the input source, this unit automatically recalls the previously selected channel.

Note

If a status message or an error message appears in the front panel display, refer to the XM Satellite Radio section in Troubleshooting on page 68 for appropriate remedies.

2 Search for a channel by using one of the XM Satellite Radio search modes. To select a channel from the all channel list, refer

to All Channel Search mode on page 51.

To select a channel by category, refer to Category Search mode on page 51.

To select a channel from the preset channels, refer to Preset Search mode on page 51.

To select the desired channel directly by entering the channel number, refer to Direct number access mode on page 52.

All Channel Search mode

1 Press SRCH MODE repeatedly to select ALL CH SEARCH.

2 Press PRESET/CH / repeatedly to search for a channel within all channels.

Hint

You can search for a channel quickly by pressing and holding PRESET/CH / .

Category Search mode

1 Press SRCH MODE repeatedly to select CAT SEARCH.

2 Press A-E/CAT. / repeatedly to change the channel category.

3 Press PRESET/CH / repeatedly to search for a channel within the selected channel category.

Hint

You can search for a channel quickly by pressing and holding PRESET/CH / .

Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, refer to Setting the XM Satellite Radio preset channels on page 52.

Hint

The initial factory setting of all preset channels (A1 to E8) is 001 Preview.

1 Press SRCH MODE repeatedly to select PRESET SEARCH.

2 Press A-E/CAT. / repeatedly to change the preset channel group (A to E).

3 Press PRESET/CH / repeatedly to change the preset channel number (1 to 8).

Hint

You can also select the preset channel number directly by pressing the Numeric keypad 0-9.

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO ANGLESUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

MEMORY

LOCK

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4 DOCK

When using Numeric keypad 0-9 Switch FUNC./10KEY to 10KEY

Numeric keypad 0-9

001 Preview

Lights up

51 En

LISTENING TO XM SATELLITE RADIO BROADCASTS

Direct number access mode

1 Press SRCH MODE on the remote control repeatedly to select ALL CH SEARCH or CAT SEARCH.

2 Press the Numeric keypad 0-9 to enter the desired 3-digit channel number. For example, to select the channel 123, enter 123 using Numeric keypad 0-9.

Hints

To enter a 1-digit or 2-digit channel number, press the Numeric keypad 0-9 on the remote control and then press ENTER to confirm the input number.

Instead of pressing ENTER to tune into the channel immediately, you can wait a few seconds until this unit confirms the entered channel number.

Setting the XM Satellite Radio preset channels

You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can recall any preset channel easily by selecting the preset channel group and number as described in Preset Search mode on page 51.

1 Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes. Refer to Basic XM Satellite Radio operations on page 51 for details.

2 Press MEMORY. The MEMORY indicator flashes in the front panel display for approximately 30 seconds.

Note

You must proceed to and carry out steps 3 and 4 while the MEMORY indicator is flashing in the front panel display.

3 Press PRESET/CH / repeatedly to select a preset channel group and number (A1 to E8) while the MEMORY indicator is flashing. The preset channel number appears in the front panel display.

Hint

You can select the preset station group (A to E) by pressing A-E/CAT. / repeatedly.

4 Press MEMORY to set the selected XM Satellite Radio channel as a preset channel while the MEMORY indicator is flashing. A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.

Note

Once you set a new preset channel, the one previously stored in the same preset channel group and number is overwritten.

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

MEMORYAUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

043 XMU

Currently selected channel number

Flashes

C5 043 XMU

Flashes

Selected preset channel group and number

C5:043 XMU

Colon (:)

Goes off

52 En

LISTENING TO XM SATELLITE RADIO BROADCASTS O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Displaying the XM Satellite Radio information

You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display.

Note

If a status message or an error message appears in the front panel display, refer to the XM Satellite Radio section in Troubleshooting on page 68 for appropriate remedies.

Press INFO. repeatedly to toggle between the following XM Satellite Radio information display modes.

Hints

The front panel display can indicate up to 14 alphanumeric characters at once. If the information contains more than 14 alphanumeric characters, it starts scrolling.

If the XM Satellite Radio information contains a character that cannot be recognized by this unit, the character will be displayed with a space.

To hold the current XM Radio information, press ENTER on the remote control while it is being displayed. The HOLD indicator flashes in the front panel display while you are holding the XM information. Press ENTER again to release the held information.

When the antenna of the XM Mini-Tuner Home Dock cannot receive the signals, NO SIGNAL appears in the front panel display.

CHANNEL INFO e.g.) 043 XMU

Channel number/name

CATEGORY INFO e.g.) ROCK

Channel category

SONG INFO e.g.) Coldplay / Sp

Artist name / Song title

ANTENNA INFO e.g.) 043 ANT: -

Channel number/Antenna reception level

DSP PROG. INFO e.g.) STEREO

Sound field program

Back to CHANNEL INFO

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

MEMORYAUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

53 En

SIRIUS Satellite Radio provides over 130 channels of exclusive entertainment and 100% commercial-free music. Only SIRIUS has more than 65 original music channels, from todays hits to R&B, oldies, and classical masterpieces. From authentic country and real bluegrass to cool jazz, hot latin, reggae, rock and many more. Best of all, its all 100% commercial-free. SIRIUS also has more than 55 channels of world-class sports, news and entertainment. Included as part of your subscription, you get up to 16 NFL games a week, up to 40 NBA games a week and up to 40 NHL games a week. (Games are broadcast during their respective seasons.) Coupled with great sports news from ESPN, the SIRIUS sports offering is unrivaled. And dont forget a host of other great news and entertainment, like NPR, CNBC, Fox News, Radio Disney and E! Entertainment Radio. For more information, visit http://www.sirius.com/.

Connecting the SiriusConnect tuner

Connect the SiriusConnect tuner (sold separately) to the SIRIUS terminal on the rear panel of the unit. For details, see the operating instructions provided with the SiriusConnect tuner.

Hints

To ensure optimal reception of the SIRIUS Satellite Radio signals, the antenna of the SiriusConnect tuner must be placed at or near a window with no obstacles in the path to the sky. The orientation of the antenna for the best reception differs depending on the area. Refer to the instruction manuals supplied with the SiriusConnect tuner for the installation of the antenna. You can mount it indoors or outdoors.

Use the ANTENNA INFO information in the front panel display to check the antenna reception level and adjust the orientation of the antenna.

You need to connect the SiriusConnect tuner to the AC wall outlet.

Notes

If CHECK SR TUNER or ANTENNA ERROR appears in the front panel display, the connection of the SiriusConnect tuner or antenna is incorrect. In such cases, check the connection of the SiriusConnect tuner and the antenna.

If NOT SUPPORTED appears in the front panel display, the unit does not support the connected SiriusConnect tuner.

LISTENING TO SIRIUS SATELLITE RADIO BROADCASTS

SIRIUS Satellite Radio legal disclaimer SIRIUS is available in the U.S.A. for subscribers with addresses in the continental U.S.A. and is available in Canada for subscribers with a Canadian address. To Get SIRIUS Satellite Radio a subscription and compatible tuner and antenna are required and sold separately. Visit sirius.com for the most complete and up-to-date channel lineup and information. SIRIUS and the SIRIUS dog logo and related marks are trademarks of SIRIUS Satellite Radio Inc.

DOCK

SIRIUS

XM

ANT

DC 5V

SiriusConnect tuner and the antenna (sold separately)

To the AC wall outlet

54 En

LISTENING TO SIRIUS SATELLITE RADIO BROADCASTS O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Activating SIRIUS Satellite Radio subscription

Before using the SIRIUS Satellite Radio feature, you need to activate your SIRIUS Satellite Radio subscription. To activate the subscription you need the Sirius ID which is uniquely assigned to the SiriusConnect tuner. Sirius ID is a 12-digit number and it appears on the package of the SiriusConnect tuner, on the label of the SiriusConnect tuner, and when you tune into the SIRIUS Satellite Radio channel 0 (see below).

Displaying the Sirius ID of your SiriusConnect tuner

1 Press TUNER repeatedly to select SIRIUS as the input source.

2 Press 0 (on the Numeric keypad 0-9) and ENTER to display the Sirius ID of your SiriusConnect tuner. 000 Sirius IDxxxxxxxxxxxx (xxxxxxxxxxxx indicates the 12-digit Sirius ID of your SiriusConnect tuner) appears in the front panel display.

Hints

You can also display the Sirius ID by entering 000.

To scroll the message again, press INFO..

Write the Sirius ID below.

ID___________________________

3 Contact SIRIUS Satellite Radio to activate your subscription.

Hint

Status messages appear in the front panel display during the activation. Once the activation is finished, SUB UPDATED appears.

Basic SIRIUS Satellite Radio operations

1 Press TUNER repeatedly to select SIRIUS as the input source. The SIRIUS indicator lights up in the front panel display and the SIRIUS Satellite Radio information (such as channel number, channel name, category, and artist name/song title) for the currently selected channel appears in the front panel display.

Hint

When you select SIRIUS as the input source, this unit automatically recalls the previously selected channel.

Notes

When you have not activated your subscription yet, you can only select 184 or 000.

If a status message or an error message appears in the front panel display, refer to the SIRIUS Satellite Radio section in Troubleshooting on page 69 for appropriate remedies.

2 Search for a channel by using one of the SIRIUS Satellite Radio search modes. To select a channel from the all channel list, refer

to All Channel Search mode on page 56. To select a channel by category, refer to Category

Search mode on page 56. To select a channel from the preset channels, refer

to Preset Search mode on page 56. To select the desired channel directly by entering

the channel number, refer to Direct number access mode on page 56.

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO ANGLESUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

MEMORY

LOCK

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4 DOCK

When using Numeric keypad 0-9 Switch FUNC./10KEY to 10KEY

Numeric keypad 0-9

SIRIUS Satellite Radio online information Contact for activation URL: https//activate.siriusradio.com/ Phone: 1-888-539-SIRIUS (1-888-539-7474)

184 SIRIUS Wea

Flashes

55 En

LISTENING TO SIRIUS SATELLITE RADIO BROADCASTS

Hints

If you tune into a channel that you do not subscribe, CALL 888-539-SIRIUS TO SUBSCRIBE CH xxx appears in the front panel display. To scroll the message again, press INFO..

You can set the SIRIUS Satellite Radio preset channels (Page 57).

You can display the SIRIUS Satellite Radio information in the front panel display (Page 59).

All Channel Search mode

1 Press SRCH MODE repeatedly to select ALL CH SEARCH.

2 Press PRESET/CH / repeatedly to search for a channel within all channels.

Hints

You can search for a channel quickly by pressing

and holding PRESET/CH / . You can skip channels to the previous or next

category by pressing A-E/CAT. / .

Category Search mode

1 Press SRCH MODE repeatedly to select CAT SEARCH.

2 Press A-E/CAT. / repeatedly to change the channel category.

3 Press PRESET/CH / repeatedly to search for a channel within the selected channel category.

Hint

You can search for a channel quickly by pressing and holding PRESET/CH / .

Note

The system skips the channels when the system is All Channel Search mode or Category Search mode in the following cases (it is not malfunction of the system): the channel is locked (page 58). the channel is out of service. you do not subscribe to the channel.

Preset Search mode Before selecting a preset channel in the Preset Search mode, you must preset SIRIUS channels. Refer to Setting the SIRIUS Satellite Radio preset channels on page 57 for details.

1 Press SRCH MODE repeatedly to select PRESET SEARCH.

2 Press A-E/CAT. / repeatedly to change the preset channel group (A to E).

3 Press PRESET/CH / repeatedly to change the preset channel number (1 to 8).

Hint

You can also select the preset channel number directly by pressing the Numeric keypad (1 to 8).

Direct number access mode

1 Press SRCH MODE on the remote control repeatedly to select ALL CH SEARCH or CAT SEARCH.

2 Press the Numeric keypad 0-9 to enter the desired 3-digit channel number. For example, to select the channel 123, enter 123 using Numeric keypad 0-9.

Hints

To display the Sirius ID number displayed in the front panel display, select channel 0.

To enter a 1-digit or 2-digit channel number, press the Numeric keypad 0-9 and then press ENTER to confirm the input number.

Instead of pressing ENTER to tune into the channel immediately, you can wait a few seconds until the system confirms the entered channel number.

If the selected channel is locked, PIN:___ appears in the front panel display. Enter the 4-digit Parental Lock code number by using the Numeric keypad 0-9 or press LOCK to cancel (Page 58).

56 En

LISTENING TO SIRIUS SATELLITE RADIO BROADCASTS O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Setting the SIRIUS Satellite Radio preset channels

You can use this feature to store up to 40 SIRIUS Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can recall any preset channel easily by selecting the preset channel group and number as described in Preset Search mode on page (Page 56).

1 Search for a channel you want to set as a preset channel by using one of the SIRIUS Satellite Radio search modes. Refer to Basic SIRIUS Satellite Radio operations on page 55 for details.

2 Press MEMORY. The MEMORY indicator flashes in the front panel display for approximately 30 seconds.

Note

You must proceed to and carry out steps 3 and 4 while the MEMORY indicator is flashing in the front panel display.

3 Press PRESET/CH / repeatedly to select a preset channel group and number (A1 to E8) while the MEMORY indicator is flashing.

The preset channel number appears in the front panel display.

Hint

You can select the preset station group (A to E) by pressing A-E/CAT. / repeatedly.

4 Press MEMORY to set the selected SIRIUS Satellite Radio channel as a preset channel while the MEMORY indicator is flashing. A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.

Note

Once you set a new preset channel, the one previously stored in the same preset channel group and number is overwritten.

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

MEMORY

LOCK

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

001 SIRIUS Hit

Currently selected channel number

Flashes

A1 023 Hair Na

Currently selected preset channel group and number

Flashes

A1:023 Hair Na

Colon (:)

Goes off

57 En

LISTENING TO SIRIUS SATELLITE RADIO BROADCASTS

Setting the Parental Lock You can use the Parental Lock feature to limit the access to the desired SIRIUS Satellite channels. The system automatically skips the locked channels when the system is in the All Channel Search mode or Category Search mode and you search a channel by pressing PRESET/CH

/ .

Locking/Unlocking channels Use this feature to set the Parental Lock code number (PIN) and select the channels to be locked.

1 Press TUNER repeatedly to select SIRIUS as the input source.

2 Press LOCK. PARENTAL LOCK appears in the front panel display.

3 Press ENTER. NEW PIN:0000 appears.

Hint

If the Parental Lock code number is already set, PIN:___ appears instead of NEW PIN:0000.

Note

If a SiriusConnect tuner is not connected to the unit, Not Available appears.

4 Press A-E/CAT. / to select the place you want to change, then enter a number by pressing Numeric keypad 0-9. Complete the other places using the same procedure. Keep the parental lock code number secure. You need it the next time you change the number again.

PIN________

Hints

To cancel the setting, press LOCK during the setting.

If you forget the password, restore to the factory defaults. Refer to System menu on page 65 for details.

Each time you enter a number, the cursor moves to the next place.

You can change the number by moving the cursor to the place again.

5 Press ENTER to confirm the setting.

6 Select a channel you want to lock. Refer to Basic SIRIUS Satellite Radio operations on page 55 for details.

7 Press ENTER to set the parental lock. Once the parental lock is set, the channel number is displayed with asterisk *.

Hint

Each time you press ENTER, lock (asterisk * appears) and unlock (asterisk * disappears) switches in sequence.

8 Repeat the steps 6 and 7 to lock other channels.

9 Press LOCK to return to the original display.

Hint

To cancel the parental lock using the same procedures as when you have locked the channel. Once the lock is canceled, the asterisk * disappears.

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO ANGLESUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

MEMORY

LOCK

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

SRCH MODE

TV VOL VOLUME

TUNER MUTETV INPUT

When using Numeric keypad 0-9 Switch FUNC./10KEY to 10KEY

Numeric keypad 0-9

NEW PIN:0000

PIN:1234 OK

L001 SIRIUS Hi

L001*SIRIUS Hi

58 En

LISTENING TO SIRIUS SATELLITE RADIO BROADCASTS O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Tuning into the locked channels You can tune into the locked channels by the Direct number access mode or preset tuning mode. When you tune into the locked channel, following message appears in the front panel display. Enter the code number you set for the parental lock feature by using Numeric keypad 0-9.

Notes

Enter each code number within 10 seconds. If the entered code number is incorrect, Wrong

appears in the front panel display. To cancel the tuning, press LOCK.

Displaying the SIRIUS Satellite Radio information

You can display the SIRIUS Satellite Radio information (such as channel number, channel name, category, artist name, composer name, or song title) for the currently selected channel in the front panel display.

Note

If a status message or an error message appears in the front panel display, refer to the SIRIUS Satellite Radio section in Troubleshooting on page 69 for appropriate remedies.

Displaying the SIRIUS Satellite Radio information in the front panel display Press INFO. repeatedly to toggle between the following SIRIUS Satellite Radio information display modes.

Hints

The front panel display can indicate up to 14 alphanumeric characters at once. If the information contains more than 14 alphanumeric characters, it starts scrolling.

If the SIRIUS Satellite Radio information contains a character that cannot be recognized by the system, the character will be displayed with a space.

To hold the current SIRIUS Satellite Radio information, press ENTER on the remote control while it is being displayed. The HOLD indicator flashes in the front panel display while you are holding the SIRIUS Satellite Radio information. Press ENTER again to release the held information.

When the antenna of the SiriusConnect tuner cannot receive the signals, ACQUIRING appears in the front panel display.

When an information is unavailable, ---- appears.

PIN:____

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

CHANNEL INFO e.g.) 008 Big '80s

Channel number/name

CATEGORY INFO e.g.) Pop

Channel category

SONG INFO e.g.) Sanumemo / Roa

Artist name / Song title

COMPOSER INFO e.g.) Frankie Zipper

Composer name

ANTENNA INFO e.g.) 043 ANT: -

Channel number/Antenna reception level

DSP PROG. INFO e.g.) STEREO

Sound field program

Back to CHANNEL INFO

59 En

Using iPod Once you have stationed your iPod in the Yamaha iPod universal dock (such as YDS-10/ YDS-11, sold separately) connected to the DOCK terminal of the subwoofer/system control (Page 20), you can enjoy playback on your iPod.

Supported iPod iPod (Click and Wheel) iPod touch iPod nano iPod mini

Battery charge feature This system charges the battery of an iPod stationed in the Yamaha iPod universal dock connected to the DOCK terminal of the subwoofer/system control while this system is turned on.

Stationing your iPod in the Yamaha iPod universal dock Once you station your iPod in the Yamaha iPod universal dock, iPod connected and the DOCK indicator appear in the front panel display.

Notes

Some features may not be available depending on the model or the software version of your iPod.

For a complete list of status messages that appear in the front panel display, Refer to the iPod section in TROUBLESHOOTING (Page 67).

Be sure to set the volume to minimum before docking or removing your iPod.

DOCK Set the input source to DOCK.

Playback control buttons Controls the connected iPod.

Cursor buttons ( / / / )/ENTER Navigates the menus on your iPod.

Press to move to a previous menu level.

Press / to move the cursor to an upper/ lower menu.

Press ENTER or to confirm the selected menu. Press ENTER in the Songs level menu screen to

play the selected song.

INFO. Switches between simple remote mode and menu browse mode.

Controlling your iPod in simple remote mode Docking your iPod in the Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately) enters simple remote mode. You can perform the basic operations of your iPod (play, stop, skip backward/ forward, etc.) using the supplied remote control in this mode.

Hint

Operations can be also done with the controls on your iPod. Refer to the instruction manuals of your iPod for information about these operations.

USING OPTIONAL EQUIPMENT

PLAY MODE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

CLEAR

MEMORY

LOCK

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4 DOCK

CH

SRCH MODE

h: Play/pause (Normal mode), Play (Menu browse mode)

e: Play/pause (Normal mode), Pause (Menu browse mode)

s: Stop

b / a: Skip backward/forward. When you press b just after a song has started, skip backward to the beginning of the previous song.

w / f: Search backward/forward.

60 En

USING OPTIONAL EQUIPMENT O

T H

E R

F U

N C

T IO

N S

E n

g lish

6

Controlling your iPod in menu browse mode Song information and play lists are displayed in the front panel display so that you can select and play back songs or adjust settings using the supplied remote control in this mode.

Notes

Operations cannot be done with the controls of your iPod.

Characters that cannot be displayed in the front panel display are replaced with underscores _.

1 Press INFO. to enter menu browse mode.

2 Press / / / repeatedly to select the desired menu, and then press ENTER to play back the selected song.

Shuffle Use this feature to set the system to play songs or albums in random order.

Options: Off, Songs, Album You can switch each option by pressing ENTER. Select Off to deactivate this feature. Select Songs to set the system to play songs in

random order. Select Album to set the system to play albums in

random order.

Repeat Use this feature to set the system to repeat one song or a sequence of songs.

Options: Off, One, All You can switch each option by pressing ENTER. Select Off to deactivate this feature. Select One to set the system to repeat one song. Select All to set the system to repeat a sequence

of songs.

Note

The contents of the iPod menu vary, depending on the model or the generation.

Using Bluetooth components You can connect the Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of the subwoofer/system control and enjoy the music contents stored in your Bluetooth component (such as a portable music player or computer equipped with a Bluetooth transmitter, etc.) without connecting it to the system. You need to perform pairing of the connected Yamaha Bluetooth wireless audio receiver and your Bluetooth component in advance.

DOCK Set the input source to DOCK.

BLUETOOTH ON / BLUETOOTH OFF Start or cancel the pairing. Connect or disconnect a Bluetooth component.

Playback control buttons Control the playback of a Bluetooth component.

h: Play e: Pause s: Stop b / a: Skip backward/forward

Options Level 1 Level 2 Level 3 Level 4

Playlists Playlist Song list

Artists Artist list Album list Song list

Albums Album list Song list

Songs Song list

Genres Genre list Artist list Album list Song list

Composers Composer list

Album list Song list

Settings Setting list

AUDIO

PLAY MODE

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

ANGLE

CLEAR

MEMORY

LOCK

SUBTITLE

AUTO/ MANUAL

PRESET/CH

ENTER

TV/ STB

TV VOL VOLUME

TUNER MUTETV INPUT

DVD/ USB INPUT 1-4 DOCK

CH

SRCH MODE

ON OFFBLUETOOTH

61 En

USING OPTIONAL EQUIPMENT

Pairing the Yamaha Bluetooth wireless audio receiver and your Bluetooth component

Pairing must be performed before using a Bluetooth component with the Yamaha Bluetooth wireless audio receiver connected to the system for the first time or if the registered pairing data has been deleted. Pairing refers to the operation of registering a Bluetooth component for Bluetooth communications.

1 Connect the Yamaha Bluetooth wireless audio receiver to the DOCK terminal of the subwoofer/ system control. (Page 20)

2 Press DOCK to set the input source to DOCK.

3 Turn on the Bluetooth component you want to pair with, and then enter pairing mode. Refer to the instruction manual of your Bluetooth component for details.

4 Press and hold BLUETOOTH ON for more than 3 seconds to start pairing. Searching... appears when the pairing starts. While the Yamaha Bluetooth wireless audio receiver is in pairing mode, the DOCK indicator flashes in the front panel display.

Hint

To cancel the pairing, press BLUETOOTH OFF.

5 Check that the Bluetooth component detects the Yamaha Bluetooth wireless audio receiver. If the Bluetooth component detects the Yamaha Bluetooth wireless audio receiver, the audio receiver name (YBA-10 YAMAHA for example) appears in the device list of the Bluetooth component.

6 Select the Yamaha Bluetooth wireless audio receiver in the device list of the Bluetooth component, and then enter the pass key 0000 on the Bluetooth component. When the pairing procedure is successful, Completed appears in the front panel display.

Hints

If the pairing is not completed within 8 minutes, Not found appears and the DOCK indicator is turned off in the front panel display.

If the pairing is canceled during the pairing, Canceled appears in the front panel display.

Note

The Yamaha Bluetooth wireless audio receiver can be paired with up to eight Bluetooth components. When pairing is conducted successfully with a ninth component and the pairing data is registered, the pairing data for another least recently used component is deleted.

Establishing a connection After the pairing is completed, perform the connecting operation on the system or on the Bluetooth component to enable communication between them. The connecting operation on the system is only available for the most recently connected Bluetooth component.

1 Press DOCK to set the input to DOCK.

2 Press BLUETOOTH ON to start a connection. Searching... appears in the front panel display. When the system finds the last connected Bluetooth component, BT connected appears in the front panel display for 3 seconds.

Hints

If the system cannot find the last connected Bluetooth component, Not found appears in the front panel display.

If you want to establish a connection with a Bluetooth component other than the one most recently connected to, connect from that Bluetooth component. Refer to the instruction manual of your Bluetooth component for details.

Disconnecting Press DOCK, and then BLUETOOTH OFF to disconnect the system from the Bluetooth component. Disconnected appears in the front panel display.

Playing back the Bluetooth component You can play back your Bluetooth component using the supplied remote control. You can also play back your Bluetooth component by operating it directly.

Hint

Operation using the remote control is available only when the connection is established between the Bluetooth component you want to play back and the system.

To ensure security, a time limit of 8 minutes is set for the pairing operation. Please read and fully understand all the instructions before starting.

62 En

USEFUL OPERATION

E n g lish U S E F U L O P E R A T IO N
7 Adjusting the audio delay FPD TV images sometimes lag behind the sound. You can use this function to delay the sound output to synchronize it with the video image. 1 Press AUDIO DELAY to enter adjusting mode. 2 Press / to adjust the delay time. Options: 0 to 240 ms You can adjust the delay time by the 10 ms. 3 Press AUDIO DELAY again or ENTER to exit adjusting mode. Hints The default setting is 0 ms and DELAY OFF appears in the front panel display. The system memorizes the settings assigned to each input source. Notes If you do not operate this function within 30 seconds after entering adjusting mode, the system automatically exits adjusting mode. Listening at low volume (night listening mode) Night listening mode enables you to listen to dialog or vocals more clearly at lower volume by suppressing louder sound effects. This function is useful when playing sources with wide dynamic range of the sound at night. Press NIGHT. NIGHT ON appears in the front panel display. The NIGHT indicator lights up when night listening mode is selected. Hints To cancel night listening mode, press NIGHT again. When this function is on, compressed music enhancer mode is automatically set to off. (Page 45) The setting is set for all the input sources. USEFUL OPERATION SLEEPNIGHTENHANCER AUDIO DELAY AUDIO ANGLESUBTITLE STEREO ON SCREENZOOM ON OFFBLUETOOTH DISP. MODE GAMESPORTSMUSIC FUNC. WP87010DVX-700 TV STB POWERSTANDBY/ON 10KEY MOVIE INFO. A-E/CAT. A-E/CAT. MENUTOP MENU SETUP RETURN CODE SET PRESET/CH ENTER Switch FUNC./10KEY to FUNC. DELAY 120ms Setting value SLEEPNIGHTENHANCER AUDIO DELAY STEREO ON SCREENZOOM BLUETOOTH DISP. MODE GAMESPORTSMUSIC FUNC. WP87010DVX-700 TV STB POWERSTANDBY/ON 10KEY MOVIE Switch FUNC./10KEY to FUNC. NIGHT ON Lights up

63 En

USEFUL OPERATION

Adjusting the audio balance for the playback

You can adjust the volume balance of the virtual speakers and subwoofer.

1 Press SOUND repeatedly to select the item you want to adjust. Each time you press SOUND, the item changes to subwoofer, center and surround.

SWFR Adjusts the output level of the subwoofer channel.

CENTER Adjusts the output level of the center virtual speaker channel.

SUR. Adjusts the output level of the surround virtual speaker channels.

2 Use / to adjust the volume balance. You can adjust the balance from +6 to 6.

Hints

The volume balance setting for the virtual surround speaker is assigned to both left and right channels.

You can also adjust the speaker volume while the test tone is output. (Page 45)

The setting is set for all the input sources.

Note

You cannot check the volume balance of the center virtual speaker and surround virtual speaker when the surround mode is off. Set the surround mode to on to check the volume balance.

Changing the brightness of the front panel display

You can change the brightness of the front panel display. You can also turn off the front panel display to view a movie in a darker environment.

Press DISP. MODE repeatedly. Each time you press DISP. MODE, the brightness of the front panel display changes.

The front panel display lights up momentarily when any operation is performed while DISPLAY OFF is selected.

Hints

The default setting is DIMMER OFF. Only the power indicator remains lit in DISPLAY

OFF mode.

INFO.

A-E/CAT. A-E/CAT.

MENUTOP MENU

SETUP RETURN

CODE SET

PRESET/CH

ENTER

TV/ STB TUNER MUTETV INPUT

DVD/ USB INPUT 1-4

POSITION AREA SOUND TEST

DOCK

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO

PLAY MODE

ANGLE

CLEAR

LOCK

SUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

* Selecting DISPLAY OFF turns off the front panel display. Before it turns off, DISPLAY OFF appears briefly in the front panel display.

Bright

Dark

64 En

USEFUL OPERATION U

S E

F U

L O

P E

R A

T IO

N E

n g

lish

7

Setting the sleep timer The sleep timer function sets the system to the standby mode automatically at the preset time.

Press SLEEP repeatedly until the desired turn-off time is displayed. The preset time appears on the front panel display.

Select [OFF] to cancel the sleep timer.

System menu This feature allows you to initialize the settings (such as DVD setting) or change the HDMI audio output settings by opening a specialized menu (system menu) for this purpose.

1 Set the system to standby mode.

2 Press and hold INPUT and e on the DVD controller, then press STANDBY/ON. Keep holding INPUT and e until SYSTEM MENU appears in the front panel display. The system menu appears on the front panel display.

3 Press / to select the item you want.

1:DVD INIT Resets the settings for DVD settings to the initial factory settings.

2:HDMI INIT Resets the settings for HDMI settings to the initial factory settings.

3:HDMI A ON Select if the audio signal is output from the HDMI terminal. Select [ON] to output the audio signal to HDMI components such as TV.

4:HDMI A OFF Select if the audio signal is output from the HDMI terminal. Select [OFF] not to output the audio signal to HDMI components such as TV.

5:SIRIUS P.CLR (U.S.A. and Canada models only) Clears the parental lock code for the SiriusConnect tuner.

4 Press ENTER to confirm. * is displayed on the left side of the selected item in the front panel display. Each time you press ENTER, set (asterisk * appears) and cancel (asterisk * disappears) switches in sequence. The settings will be activated the next time you turn on this unit. Press STANDBY/ON to set the system to the standby mode, then turn on the power again.

Hints

If you select other items before the system is set to the standby mode, the item you confirmed is canceled.

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO

PLAY MODE

ANGLE

CLEAR

LOCK

SUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

SLEEP 120min

Flashes

OFF

30 min.

60 min.

90 min.

120 min.

SYSTEM MENU

1:DVD INIT

65 En

USEFUL OPERATION

The next time you turn on the system after selecting an item between 1 and 4 in the system menu, the system starts with DVD as an input source.

Setting the preset code You can use the remote control to control the power, TV input, channel, and volume for up to two components, such as TV or Set top box (STB). Set the preset codes depending on the components.

Hint

The preset cords are set to 298 (TV) and 748 (STB) as the default settings.

1 Switch TV/STB to the side you want to set.

2 Press and hold CODE SET, then press POWER.

3 Point the remote control toward the remote control sensor on the DVD controller and enter a 3-digit code while holding CODE SET. Refer to LIST OF PRESET CODES on the appendix for the corresponding codes.

4 Release CODE SET. If the preset cord is set correctly, PRESET OK! appears in the front panel display.

Note

If you have failed to set the preset code, PRESET NG! appears in the front panel display. Try to set it again.

Hints

When you select the preset cord for cable or DBS, you can use only POWER and CH +/. If a preset cord for TV is set on the other side, you can use TV VOL +/ or TV INPUT to control TV.

To set another preset code, switch TV/STB to the other side and repeat the step 2 to step 4.

Operating a TV/STB Once you set the preset code, you can operate your TV/ STB.

1 Switch TV/STB to the side, which the preset code is set.

2 Press the button you want to operate.

SLEEPNIGHTENHANCER

AUDIO DELAY

AUDIO ANGLESUBTITLE

STEREO

ON SCREENZOOM

ON OFFBLUETOOTH

DISP. MODE

GAMESPORTSMUSIC

FUNC.

WP87010DVX-700

TV STB POWERSTANDBY/ON

10KEY

MOVIE

A-E/C T. A-E

SETUP RETURN

CODE SET

EN ER

TV/ STB

Switches TV or STB.

66 En

ADDITIONAL INFORMATION

E n g lish A D D IT IO N A L IN F O R M A T IO N
8 If there is any problem with your unit, check the following items. If you cannot solve your problem with the following remedies or if your problem is not listed below, turn off the system and unplug the unit, then consult the nearest authorized Yamaha dealer or service center. General TROUBLESHOOTING Problem Cause Remedy See page Power turns on but immediately shuts off. The power cable may be connected improperly. Make sure the power cable is plugged into the outlet firmly. 20 A speaker cable may be shorted. Make sure all speaker cables are connected properly. 14 This system may have received a strong electrical shock, such as from a lightening bolt or excessive static electricity. Set this system to standby mode, and then disconnect the power cable. Wait for about 30 seconds, connect the power cable, and then turn the system on again. 20, 22 The speakers make no sound. The volume may be set to minimum level. Adjust the volume level. 5, 10 The mute function may be activated. Cancel the mute function. 10 The input source or input setting may be incorrect. Select the correct input source or input setting. 5, 10 The cables may be connected improperly. Make sure all cables are connected properly. 14 Sound is too low on one side. The cables may be connected improperly. Make sure all cables are connected properly. 14 Speaker channels other than the front ones make no sound. You may be listening to stereo sounds without surround mode. Press a surround mode button to enable the sound field effect. 43 The virtual speaker channel makes no sound. The volume of the center virtual speaker channel may be set to minimum level. Adjust the volume level of the center virtual speaker channel. 64 The volume of the surround virtual speaker channels may be set to minimum level. Adjust the volume level of the surround virtual speaker channels. 64 The subwoofer makes no sound. The volume of the subwoofer channel may be set to minimum level. Adjust the volume level of the subwoofer. 64 Sound is poor (noisy). A speaker cable may be shorted. Make sure all cables are connected properly. 14 This system does not operate properly. This system may receive a strong electrical shock, such as from a lightening bolt or excessive static electricity, or drop in power supply. Set this system to standby mode, and then disconnect the power cable. Wait for about 30 seconds, connect the power cable, and then turn on this system. 20, 22 The system control cable may be connected improperly. Connect the system control cable firmly. 14 A digital or high-frequency equipment produces noises. The system may be placed close to digital equipment or high-frequency equipment. Place this system farther away from such equipment. -- The remote control does not operate the system. The system may be outside the remote control operation range. For information on the remote control operation range, refer to Using the remote control. 21 The remote control sensor of this system may be exposed to direct sunlight or lighting. Change the lighting. -- The batteries may be worn out. Replace the batteries. 21

67 En

TROUBLESHOOTING

Tuner (FM)

XM Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the causes and follow the corresponding remedies.

The picture is not displayed on the TV screen.

The TV cables may be connected improperly.

Make sure all cables are connected properly.

17

If the COMPONENT VIDEO OUTPUT and HDMI connections are used simultaneously, the COMPONENT VIDEO OUTPUT jacks may output progressive video signal regardless of the Component Out setting.

Disconnect the HDMI component, or connect a TV that supports progressive video to the COMPONENT VIDEO OUTPUT jacks.

18

The picture is not displayed on the TV screen correctly.

The Video Output settings may be incorrect.

Check the Video Output settings and correct as necessary.

38

The Component Out setting is set to Progressive, but the TV connected to the COMPONENT VIDEO OUTPUT may not support progressive scanning.

Change the Component Out setting to Interlace.

38

The TV connected to the HDMI OUTPUT terminal may not support the selected resolution.

Change the HDMI Resolution setting to a resolution supported by the HDMI TV.

38

The message HDMI ERROR is displayed or the picture is not displayed on the HDMI TV screen.

The wrong HDMI resolution may be selected or an HDMI error may have occurred.

Check the HDMI Resolution setting and correct as necessary.

38

Reset the HDMI settings. 65

Problem Cause Remedy See

page

FM stereo reception is noisy. The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away, or if the antenna quality is poor.

Check the antenna connections. 18

Try using a high-quality directional FM antenna.

--

Use the manual tuning method. 46

There is distortion, and clear reception cannot be obtained, even with a good FM antenna.

There is multi-path interference. Adjust the antenna position to eliminate multi-path interference.

--

The desired station cannot be tuned into with the automatic tuning method.

The signal is too weak. Use a high-quality directional FM antenna.

--

Use the manual tuning method. 46

Status message Cause Remedy See

page

CHECK XM TUNER The XM Mini-Tuner is not installed in the XM Mini-Tuner Home Dock or the XM Mini-Tuner Home Dock is not connected to this unit.

Confirm the XM Mini-Tuner is fully seated in the dock and check that the XM Mini-Tuner Home Dock cable is connected to this unit.

50

CHECK ANTENNA The XM antenna is not connected to the XM Mini-Tuner Home Dock or the XM antenna cable has become damaged.

Check that the XM antenna is securely connected to the XM Mini-Tuner Home Dock and check the antenna cable for damage. Replace the XM antenna if the cable is damaged.

50

Problem Cause Remedy See

page

68 En

TROUBLESHOOTING A

D D

IT IO

N A

L IN

F O

R M

A T

IO N

E n

g lish

8

SIRIUS Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the causes and follow the corresponding remedies.

LOADING The XM Mini-Tuner is acquiring audio or program information from the XM satellite signal. This message can also occur in weak XM signal conditions. Note that this unit may not respond to some operations while this message is displayed.

This message should disappear in a few seconds in good signal conditions. If you see this message often, reposition the XM antenna to get better signal reception. Use the ANTENNA INFO information in the front panel display or XM Information screen in the video monitor to check the antenna reception level.

53

NO SIGNAL The XM Mini-Tuner is not receiving the XM satellite signal. Something may be blocking the XM antenna view of the satellites or the antenna is not properly aimed.

Check for antenna obstructions and reposition the XM antenna to get better signal reception. Use the ANTENNA INFO information in the front panel display or XM Information screen in the video monitor to check the antenna reception level. See instructions supplied with the XM Mini-Tuner and Dock for antenna installation information.

53

OFF AIR The XM channel you selected is not currently broadcasting.

Check back at a later time; in the mean time, select another channel.

--

CH UNAUTH You may be attempting to tune to an XM channel that is blocked or that you cannot receive with your XM subscription package.

Consult the latest channel guide at http://www.xmradio.com/ (US residents) and http://www.xmradio.ca/ (Canadian residents) for the current list of channels. For information on receiving this channel, visit http:// www.xmradio.com/ (US residents) and http://www.xmradio.ca/ (Canadian residents) or contact XM Satellite Radio at 1-800-967-2346 (US residents) and 1-877-438-9677 (Canadian residents).

--

CH UNAVAIL The selected channel is not available. The channel may have been reassigned to a different channel number. This message may occur initially with a new XM Mini-Tuner that has not received XM signal for an extended period.

Consult the latest channel guide at http://www.xmradio.com/ (US residents) and http://www.xmradio.ca/ (Canadian residents) for the current list of channels. For the case of a new XM Mini-Tuner that has not received XM signal for an extended period, allow the XM Mini-Tuner to receive the XM satellite signal for at least 5 minutes and then try to select the channel again.

--

- - - - No artist name or song title is available for this selection.

No action required. --

UPGRADE XM TUNER This unit does not support the connected XM Mini-Tuner.

Connect a XM Mini-Tuner that is compatible with XM Rev 4x.

--

Status message Cause Remedy See

page

ANTENNA ERROR The antenna is not connected to the SiriusConnect tuner properly.

Check the connection of the antenna and SiriusConnect tuner.

54

Status message Cause Remedy See

page

69 En

TROUBLESHOOTING

iPod

Note

In case of a transmission error without a status message appearing in the front panel, check the connection to your iPod.

CHECK SR TUNER The SiriusConnect tuner is not connected to the SIRIUS terminal of this unit correctly.

Check the connection of the SiriusConnect tuner and this unit.

54

The SiriusConnect tuner is not connected to the AC wall outlet.

Connect the power cable of the SiriusConnect tuner to the AC wall outlet.

54

NOT SUPPORTED This unit does not support the connected SIRIUS Satellite Radio tuner.

Connect the SiriusConnect tuner that is compatible with this unit.

--

ACQUIRING The signal is too weak. Adjust the orientation of the antenna of the SiriusConnect tuner. Use the ANTENNA INFO information in the front panel display or SIRIUS Information screen in the video monitor to check the antenna reception level.

59

UPDATING The SiriusConnect tuner is updating the channel list.

Wait until the updating is completed. --

The period of the subscription is end. Contact SIRIUS Satellite Radio to renew the subscription.

--

F/W UPDATING The SiriusConnect tuner is updating the firmware.

Wait until the updating is completed. --

CALL SIRIUS (CALL 888-539-SIRIUS TO SUBSCRIBE)

The selected channel is not subscribed. Contact SIRIUS Satellite Radio to subscribe the selected channel. URL: https://activate.siriusradio.com/ Phone: 1-888-539-SIRIUS (1-888-539-7474)

--

Select another channel. --

SUB UPDATED The subscription information is updated.

-- --

INVALID The selected channel is currently out of service.

Select another channel. --

Not Available The operation you made is not available.

-- --

Status message Cause Remedy See

page

Unknown iPod The iPod being used is not supported by this system.

Only iPod (Click and Wheel), iPod touch, iPod nano, and iPod mini are supported.

--

iPod connected Your iPod is properly stationed in the Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately) connected to the DOCK terminal of this system, and the connection between your iPod and this system is completed.

-- --

Disconnected Your iPod was removed from the Yamaha iPod universal dock (such as YDS-10 or YDS-11, sold separately) connected to the DOCK terminal of this system.

Station your iPod back in the Yamaha iPod universal dock (YDS-10 or YDS- 11, sold separately) connected to the DOCK terminal of this system.

20

Status message Cause Remedy See

page

70 En

TROUBLESHOOTING A

D D

IT IO

N A

L IN

F O

R M

A T

IO N

E n

g lish

8

Bluetooth

Note

In case of a transmission error without a status message appearing in the front panel, check your Bluetooth component.

Disc

Status message Cause Remedy See

page

Searching... The Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) and the Bluetooth component are in the process of the pairing.

-- --

The Yamaha Bluetooth wireless audio receiver and the Bluetooth component are in the process of establishing the connection.

-- --

Completed The pairing is completed. -- --

Canceled The pairing is canceled. -- --

Not found The system cannot find the Bluetooth component while performing the pairing or trying to connect to the Bluetooth component.

-- --

BT connected The connection between the Yamaha Bluetooth wireless audio receiver and the Bluetooth component is established.

-- --

Disconnected The Bluetooth component is disconnected from the Yamaha Bluetooth wireless audio receiver.

-- --

Not Available The pairing is performed when the Yamaha Bluetooth wireless audio receiver is connected to the Bluetooth component.

Perform the pairing when the Yamaha Bluetooth wireless audio receiver is not connected to the Bluetooth component.

61

Problem Cause Remedy See

page

Some functions do not work. Not all discs support all of the disc playback functions of this unit.

Try another disc. 2

Playback does not start, the sound or picture is distorted or playback is stopped halfway.

The disc is not properly set. Place the disc, label-side up. 26

The disc is dirty. Check the disc and clean as necessary. 2

The loaded disc in not supported. Use only supported disc formats. The Disc that is not compliant with the CD Audio specification (e.g. copy control CD, the non-DVD side of the DualDisc, etc.) may not play.

2

Condensation on the pickup lens. When this system is moved from a cold environment to a warm one, condensation may form on the pickup lens.

Wait for one to two hours for the condensation to evaporate, then try again.

--

After loading a DVD-Video, the same picture is usually displayed and you cannot move to the main contents or the main menu.

The Resume/Last memory function is effective.

Press s twice to set the Resume function to off.

29

Reset the DVD setting to the initial factory settings (DVD INIT) to clear the resume point.

65

71 En

TROUBLESHOOTING

USB

Cannot select foreign language soundtracks or subtitles.

The loaded disc does not contain foreign language soundtracks or subtitles.

See the disc packaging for details on foreign language soundtracks and subtitles.

--

The loaded disc does not allow this operation.

Select foreign language soundtracks or subtitles in the disc menu.

28

Subtitles are not displayed. Subtitles are turned off. Select a subtitle. 29

The loaded disc does not contain subtitles.

See the disc packaging for details on subtitles.

--

When using A-B repeat playback, subtitles outside of the specified section may not be displayed.

Turn off A-B repeat playback. 30

Cannot select camera angles. The loaded disc does not contain multiple camera angles.

See the disc packaging for details on multiple camera angles.

--

Cannot play some files. Only MP3, WMA, MPEG-4 AAC, and JPEG files with no copy protection (DRM) can be played.

Use files with no copy protection. --

The file is not supported. Use only supported file format. 26, 27, 33

Cannot record a DVD. The DVD is copy protected. Most DVD-Video discs are copy protected and cannot be recorded.

--

The TV picture is disturbed. The picture may be disturbed while rewinding or fast forwarding.

This is not a malfunction. --

The picture is stretched or black bars are displayed.

The TV Screen setting is set incorrectly.

Check the TV Screen setting and change as necessary.

38

Ghosting appears in some areas of the picture.

The video material is incompatible with the Progressive Scanning function due to the way in which it was edited or the type of material it is.

Change the Component Out setting to Interlace.

38

The disc ejected as soon as it was loaded.

The loaded disc in not supported. Use only supported disc formats. 2

The message No Disc is displayed even though a disc is loaded.

The disc is not properly inserted into the disc slot.

Insert the disc, label-side up into the disc slot.

26

Cannot display the DVD setup menu, Initial Settings, and Video Adjust menus.

These menus can be displayed only when DVD as the input source is selected.

Select DVD as the input source. 5, 9

Problem Cause Remedy See

page

Cannot play content stored on a USB mass storage device.

Not all USB storage devices are recognized by this unit.

Try another USB storage device. --

Only USB storage devices formatted with FAT16 or FAT32 are supported.

Reformat the USB storage device with FAT16 or FAT32.

--

The USB storage device is connected to a USB hub, but this unit does not support USB hubs.

Connect the USB storage device directly to the USB port of this unit.

35

Cannot play some files. Only MP3, WMA, MPEG-4 AAC, and JPEG files with no copy protection (DRM) can be played.

Use files with no copy protection. --

The file is not supported. Use only supported file format. 33

Problem Cause Remedy See

page

72 En

TROUBLESHOOTING A

D D

IT IO

N A

L IN

F O

R M

A T

IO N

E n

g lish

8

The message NO USB or USB ERROR is displayed.

The USB device is not compatible, or this unit cannot supply enough power to the device for it to function properly.

Turn this unit off and on again. 22

Set this unit to standby, disconnect the USB storage device, and then reconnect it.

22, 35

Select the USB input source, and then connect the USB device.

35

Select a different input source and select USB again.

35

If the USB storage device came with its own power adapter, use it to power the USB storage device while connecting to this unit.

--

If the message still appears, the USB storage device is probably incompatible with this unit.

--

Problem Cause Remedy See

page

73 En

AAC (Advanced Audio Coding) An audio compression scheme defined as part of the MPEG-2/MPEG-4 standard. AAC supports up to 48 channels and generally achieves better sound quality than MP3 at the same bit rate.

Analog Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These terminals send audio through two channels, the left and right.

Aspect ratio The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9.

Bit Short for binary digit. Represents the smallest unit of information manipulated on a computer. In audio systems, the bit size determines resolution to digitize analog signals. The larger the bit size, the larger the dynamic range (the ratio of maximum and minimum frequency level) and the finer the sounds. Generally, an audio CD is 16 bit and DVD audio is 24 bit.

Bit rate The amount of data used to hold a given length of music; measured in kilobits per second, or kbps. Also, the speed at which you record. Generally, the higher the bit rate, or recording speed, the better the sound quality. However, higher bit rates use more space on a disc.

Component Video Terminals for inputting or outputting a component video signal.Component video signal consists of three lines, the luminance signal (Y) and two color difference signals (PB/CB, PR/CR), which enable to provide high- quality video.

Disc menu A screen display prepared for allowing selection of images, sounds, subtitles, multi-angles, etc. recorded on a DVD.

DivX DivX is a popular media technology created by DivX, Inc. DivX media files contain highly compressed video with high visual quality that maintains a relatively small file size. DivX files can also include advanced media features like menus, subtitles, and alternate audio tracks. Many DivX media files are available for download online, and you can create your own using your personal content and easy-to-use tools from DivX.com.

DivX Ultra DivX Ultra Certified products provide enhanced playback of advanced media features supported by the DivX Media Format. Key features include interactive video menus, subtitles, alternate audio tracks, video tags, and chapter points.

DMF (DivX Media Format) The DivX Media Format supports advanced media features, adding controls for an interactive media experience: interactive video menus, chapter points, multi-language subtitles, and alternate audio tracks.

Dolby Digital Digital surround sound system which is developed by Dolby Laboratories provides completely independent multi-channel audio. With 3 front channels (left, center, and right) and 2 surround stereo channels, Dolby Digital provides five full-range audio channels. With an additional channel especially for bass effects (called LFE, or low frequency effect), the system has a total of 5.1-channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the surround speakers, more accurate moving sound effects and surround sound environment are possible than with Dolby Surround.

Dolby Pro Logic II It is an improved matrix decoding technology that provides better spatiality and directionality on Dolby Surround programmed material; provides a convincing three-dimensional soundfield on conventional stereo music recordings; and is ideally suited to bring the surround experience to automotive sound. While conventional surround programming is fully compatible with Dolby Pro Logic II decoders, soundtracks will be able to be encoded specifically to take full advantage of Pro Logic II playback, including separate left and right surround channels. (Such material is also compatible with conventional Pro Logic decoders).

DTS (Digital Theater Systems) Digital surround sound system developed by Digital Theater Systems, Inc., which provides 5.1 channel audio (max). With an abundance of audio data, it is able to provide authentic-sounding effects.

HDMI HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital audio/video interface. Providing an interface between any source (such as a set-top box or AV controller) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as well as multi-channel digital audio using a single cable. HDMI transmits all ATSC (Advanced Television Systems Committee) HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements. When used in combination with HDCP (High- bandwidth Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operators. For further information on HDMI, visit the HDMI website at www.hdmi.org/.

GLOSSARY

74 En

GLOSSARY A

D D

IT IO

N A

L IN

F O

R M

A T

IO N

E n

g lish

8

Interlace The most common type of scanning used in televisions. It divides a screen into even and odd numbered fields for scanning, and then builds an image by combining them into one image (frame).

JPEG (Joint Photographic Experts Group) A standardized image compression system proposed by the Joint Photographic Experts Group. It can reduce image data sizes to 1 to 10% of their original sizes, and works on digital photographs effectively.

MP3 (MPEG Audio Layer-3) An audio file compression technology. It can reduce audio data sizes to about 10% of their original sizes while maintaining CD-level audio quality.

MPEG (Moving Pictures Experts Group) International standard for digital video and audio compression generated by ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission). Includes MPEG-1, MPEG-2, and MPEG-4. MPEG-1 offers VHS level video quality and is often used on video CDs. MPEG-2 offers S-VHS level video quality and is often used on DVDs.

Parental lock (On DVD) Limits Disc play according to the age of the users or the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the softwares level is higher than the user-set level. (On Sirius Satellite Radio) Limits the channel (channel skip) to protect children from inappropriate contents. The limitation is set by channel basis.

Playback control (PBC) An on-screen menu recorded on a Video CD or Super Video CD that enables interactive playback and searching.

Progressive Scan A method of displaying all scanning lines in a frame at once, reducing flicker noticeable on a larger screen and creating a sharp and smooth image.

Region code Many DVD discs include a region code so that the copyright owner can control DVD software distribution only to regions where they are ready to distribute. There are six regions codes, which restrict a DVD player to playing a DVD disc with the same region code.

Surround A controller for creating realistic three-dimensional sound fields full of realism by arranging multiple speakers around the listener.

VR format (Video Recording format) A DVD video recording format, which allows editing DVD video data recorded onto a disc. You need a VR format compatible player for playback.

75 En

DVR-700 Input

Others ............................................................................................. USB: 1 Output

Video.....................................................................................Composite: 1 Component: 1

HDMI: 1 Others ........................................................................System Connector: 1

Dimensions (W x H x D)................................................360 x 68 x 224 mm Weight ................................................................................................. 2.6 kg

NS-P700 Woofer.................................................................... 5.5 cm cone woofer x 2,

Magnetic shielding type Tweeter........................................................2.5 cm Balanced dome tweeter,

Magnetic shielding type Input Power (Nominal/Maximum)........................................... 40 W/100 W Frequency Response............................................ 130 Hz 20 kHz (-10 dB) Dimensions (W x H x D)

Excluding stands ...........................................................95 x 190 x 98 mm Including stands/Upright position...............................95 x 206 x 106 mm Including stands/Horizontal position ........................ 190 x 111 x 106 mm

Weight .................................................................. 1.2 kg (Excluding stands)

NS-PSW700 Type..................................................................................... Bass reflex type

16.5 cm cone, Magnetic shielding type Frequency Response.............................................. 35 Hz 130 Hz (-10 dB) Dimensions (W x H x D)..............................................194 x 450 x 400 mm Weight .................................................................................................. 13 kg Power Supply

[U.S.A. and Canada models].......................................... AC 120 V, 60 Hz [Asia, Europe, Russia models] ....................................... AC 230 V, 50 Hz [Taiwan model] .............................................................. AC 110 V, 60 Hz [Australia model] ........................................................... AC 240 V, 50 Hz

Power Consumption ............................................................................. 50 W Standby Power Consumption (reference data)....................... Less than 1 W INPUT

Analog Audio............................................................... Pin Jack: 1 (AUX) Digital Audio..............................................................................Coaxial: 1

Optical: 2 DOCK: 1

(YDS-10, YDS-11, YBA-10) FM Antenna terminal: 1

XM Tuner: 1 (U.S.A., and Canada model only) Sirius Tuner: 1 (U.S.A., and Canada model only)

OUTPUT Analog Audio.................................................................. SPEAKER OUT Others ........................................................................System Connector: 1

Amplifier Section Maximum Power

SP OUT......................................................70 W [6 , 1 kHz, 10 %THD] Subwoofer ................................................70 W [6 , 100 Hz, 10 %THD]

Minimum RMS Output Power SP OUT........................................................55 W [6 , 1 kHz, 1 %THD] Subwoofer ..................................................55 W [6 , 100 Hz, 1 %THD]

Input Sensitivity/Input Impedance AUX................................................................................... 350 mV/32 k

Maximum Input Signal AUX ............................................................... 2.2 V [1 kHz, DSP=Thru]

Frequency Response SP OUT.......................................................................-2.0 1 dB [20 Hz]

0 dB [1 kHz] -0.5 1 dB [20 kHz]

S / N Ratio SP OUT .......................................... 82 dB [1 kHz, 18.5 V/6 , Analog] SP OUT ........................................... 98 dB [1 kHz, 18.5 V/6 , Digital]

[IHF-A Network] Total Harmonic Distortion

SP OUT ........................... 0.06 % [1 kHz, Analog, Digital 20 kHz-LPF] Residual Noise ............................................................... SP OUT: 138 uV

DVD Section Video Output.......................................................Composite: 1 Vp-p (75 ) Y Output/Component Video Output ..................Component: 1 Vp-p (75 ) PB Output/Component Video Output..............Component: 0.7 Vp-p (75 ) PR Output/Component Video Output..............Component: 0.7 Vp-p (75 )

Tuner Section FM Tuning Range

[U.S.A. and Canada models]........................................ 87.5 to 107.9 MHz [Other models] ......................................................... 87.50 to 108.00 MHz

Radio Data System Function (Europe and Russian model only)

Other Section SOUND FIELD................................... MOVIE, MUSIC, SPORTS, GAME

Surround mode Night listening mode Extended stereo Compressed music enhancer

VIRTUAL SURROUND PROCESSOR .......AIR SURROUND XTREME AUDIO DECODE.......................Dolby Digital / Dolby Pro Logic II / DTS Speakers distance mode ..........................................Wide / Normal /Narrow

Specifications are subject to change without prior notice.

SPECIFICATIONS

76 En

ADDITIONAL INFORMATION

E n g lish A D D IT IO N A L IN F O R M A T IO N
8 A A-B repeat playback ............................ 30 AIR SURROUND XTREME .............. 43 Angle Indicator, Display menu ............ 41 angle selection ...................................... 29 ANGLE, remote control ...................... 10 ANTENNA terminal, subwoofer/system control rear panel ............................... 8 AREA, remote control ......................... 10 AUDIO DELAY, remote control ........... 9 audio file playback ............................... 33 Audio language .................................... 25 Audio Language, Language menu ....... 40 AUDIO, remote control ....................... 10 AUTO indicator, front panel display ..... 7 Automatic station preset, FM ............... 47 B battery insertion, remote control .......... 21 Bluetooth component listening ............ 61 brightness of front panel display .......... 64 Brightness, Video Adjust menu ........... 37 C CH, remote control .............................. 10 Chroma Level, Video Adjust menu ..... 37 CLEAR, remote control ....................... 10 CODE SET, remote control ................. 10 Component Out, Video Output menu ................................................ 38 COMPONENT VIDEO OUTPUT jacks, DVD controller rear panel ................. 6 compressed music enhancer ................. 45 connecting DVD controller .................. 16 connecting external AV component .... 19 connecting FM antenna ........................ 18 connecting HDMI component ............. 18 connecting power cable ....................... 20 connecting speakers ............................. 14 connecting TV ...................................... 17 connection ............................................ 14 Contrast, Video Adjust menu ............... 37 Country Code, Parental Lock ............... 42 D Decoder indicator, front panel display ... 7 Direct frequency tuning, FM ............... 47 disc ejection ......................................... 28 disc information displaying ................. 29 Disc loading slot, front panel ................. 5 disc menu ............................................. 28 Disc menu language ............................. 25 disc navigator ....................................... 32 disc playback ........................................ 26 DISP. MODE, remote control ................ 9 Display, Initial Setting menu ............... 41 displaying disc information ................. 29 distance between speakers setting ........ 44 DivX video playback ........................... 26 DivX VOD, Options menu .................. 42 DOCK indicator, front panel display .....7 DOCK terminal, subwoofer/system control rear panel ...............................8 DOCK, remote control .........................10 DVD controller connection ..................16 DVD Menu Lang., Language menu .....40 DVD setup menu ..................................36 DVD/USB, remote control ...................10 E EJECT, front panel .................................5 ejecting disc ..........................................28 ENHANCER indicator ...........................7 ENHANCER, remote control .................9 ENTER, remote control .......................10 extended stereo mode ...........................45 external AV component connection .....19 F FM antenna connection ........................18 FM listening .........................................46 FM tuning operation .............................46 front panel display brightness ..............64 Front panel display, DVD controller ......7 Front panel display, front panel .............5 Front panel, DVD controller ..................5 FUNC./10KEY, remote control .............9 G GAME, AIR SURROUND XTREME .........................................43 GAME, remote control ...........................9 Gamma, Video Adjust menu ................37 H HDMI Color, Video Output menu .......39 HDMI component connection ..............18 HDMI OUTPUT terminal, DVD controller rear panel ...........................6 HDMI Resolution, Video Output menu .................................................39 Hue, Video Adjust menu ......................37 I Initial Setting menu ..............................38 initialization ..........................................65 INPUT 1 OPTICAL jack, subwoofer/ system control rear panel ...................8 INPUT 2 OPTICAL jack, subwoofer/ system control rear panel ...................8 INPUT 3 COAXIAL jack, subwoofer/ system control rear panel ...................8 INPUT 4 ANALOG jacks, subwoofer/ system control rear panel ...................8 Input selection buttons, remote control ..............................................10 INPUT, front panel .................................5 INPUT, remote control .........................10 inserting batteries, remote control ........21 iPod content playback ..........................60 J JPEG file slide show ............................ 34 L language preference setting ................. 25 Language, Initial Setting menu ............ 40 Level Change, Parental Lock .............. 42 Lights up when compressed .................. 7 listening area shifting .......................... 44 M Manual station preset, FM ................... 48 Manual tuning, FM .............................. 46 MEMORY indicator, front panel display ............................................... 7 menu browse mode, iPod .................... 61 MENU, remote control ........................ 10 MOVIE, AIR SURROUND XTREME ........................................ 43 MOVIE, remote control ......................... 9 MUSIC, AIR SURROUND XTREME ........................................ 43 MUSIC, remote control ......................... 9 MUTE, remote control ........................ 10 N NIGHT indicator, front panel display ... 7 NIGHT, remote control ......................... 9 Numeric keypad, remote control ........... 9 O ON SCREEN, remote control ................ 9 On-screen display language ................. 25 Options, Initial Setting menu ............... 41 OSD language ...................................... 25 OSD Language, Display menu ............ 41 P pairing to Bluetooth component .......... 62 Parental Lock, Options menu .............. 41 Password, Parental Lock ..................... 41 PBC ...................................................... 28 placing speakers ................................... 12 PLAY MODE, remote control ............ 10 playable disc .......................................... 2 playback control .................................. 28 playback controls ................................. 27 playing back audio file ........................ 33 playing disc .......................................... 26 playing DivX video ............................. 26 playing WMV file ................................ 26 POSITION, remote control ................. 10 power cable connection ....................... 20 Power cable, subwoofer/system control rear panel ........................................... 8 Power indicator, front panel .................. 5 POWER, remote control ........................ 9 preset code, remote control .................. 66 preset station, FM ................................ 47 program playback ................................ 31 INDEX

77 En

INDEX

R random playback .................................. 30 Rear panel, subwoofer/system control ... 8 Recalling preset station, FM ................ 49 Remote control ....................................... 9 Remote control sensor, front panel ........ 5 remote control using ............................ 21 repeat playback .................................... 30 resuming playback ............................... 29 RETURN, remote control .................... 10

S search mode ......................................... 31 SETUP, remote control ........................ 10 Sharpness, Video Adjust menu ............ 37 shifting listening area ........................... 44 simple remote mode, iPod ................... 60 SLEEP indicator, front panel display .... 7 sleep timer ............................................ 65 SLEEP, remote control .......................... 9 slide show of JPEG file ........................ 34 SOUND, remote control ...................... 10 soundtrack language changing ............. 28 speaker connection ............................... 14 speaker layout ...................................... 11 speaker placement ................................ 12 SPEAKER terminals, subwoofer/system

control rear panel ............................... 8 SPORTS, AIR SURROUND

XTREME ......................................... 43 SPORTS, remote control ....................... 9 STANDBY/ON, front panel .................. 5 STANDBY/ON, remote control ............ 9 station preset, FM ................................ 47 STEREO indicator, front panel

display ................................................ 7 STEREO, remote control ....................... 9 Subtitle Display, Language menu ........ 40 Subtitle language .................................. 25 subtitle language changing ................... 29 Subtitle Language, Language menu ..... 40 SUBTITLE, remote control ................. 10 supplied accessory ................................. 4 SYSTEM CONNECTOR terminal, DVD

controller rear panel ........................... 6 SYSTEM CONNECTOR terminal,

subwoofer/system control rear panel .................................................. 8

system menu ........................................ 65

T TEST, remote control .......................... 10 TUNED indicator, front panel display ... 7 TUNER, remote control ....................... 10 tuning operation, FM ........................... 46 Turning on ............................................ 22 TV connection ...................................... 17 TV display setting ................................ 23 TV INPUT, remote control .................. 10 TV Screen, Video Output menu .......... 38 TV VOL, remote control ..................... 10

U USB device using ................................. 35

USB terminal, front panel ......................5

V Video Adjust menu ..............................37 video input/output setting .....................23 VIDEO OUTPUT jack, DVD controller

rear panel ............................................6 Video Output, Initial Setting menu ......38 virtual surround effect checking ..........45 VOLUME, front panel ...........................5 VOLUME, remote control ...................10

W WMV file playback ..............................26

Z ZOOM, remote control ..........................9 zooming in ............................................29

78 En

APPENDIX

LIST OF PRESET CODES LISTE DES CODES PRDFINIS

TV Brand name Preset code Yamaha 299, 292, 242, 285, 287,

253, 206 Admiral 292, 293, 216 Aiwa 294, 276, 283, 284 Akai 295, 296 Alba 296 AOC 297 Bell & Howell 292 Bester 298 Blaupunkt 229, 222 Blue sky 298 Brandt 223 Brocsonic 297 Bush 296 By Design 201, 202 Clatronic 298 Craig 224 Croslex 225, 298 Curtis Mathis 297, 226 Daewoo 297, 298, 224, 227, 228,

215, 289 Daytron 239 Dual 298 Dwin 293, 281 Electrograph 289 Emerson 297, 224, 239, 232 Ferguson 223, 265, 266 First line 298 Fisher 295, 233 Fraba 298 Fujitsu 290 Funai 277, 278 Gateway 215, 289 GE 293, 297, 234, 235, 236 Goodmans 296, 298, 223 Grundig 229, 238, 249 Hitachi 297, 239, 242, 243, 285,

206 ICE 296 Irradio 296 Itt/Nokia 244, 245 JC Penny 293, 297, 234, 237, 240 JVC 296, 246, 247, 286 Kendo 298 KTV 297, 239 LG/Goldstar 297, 298, 239, 237, 240 Loewe 298, 248, 207 LXI 293, 297, 225, 226, 233,

298 Magnavox 297, 225, 239, 298 Marantz 298, 210 Matsui 295 Medion 203, 204, 298 Memorex 297, 216

Mitsubishi 299, 297, 259, 287 Nad 226, 255 NEC 297, 252, 282 Nokia 244, 245 Nokia Oceanic 245 Nordmende 265, 266 Onwa 296 Panasonic 234, 235, 236, 253, 288 Philco 297, 225, 239, 298 Philips 225, 205, 298 Pioneer 226, 235, 254, 255 Portland 297, 256 Proscan 293, 221, 231, 241, 251 Proton 297, 250, 260, 270 Quasar 234, 235 Radio Shack 299, 293, 297 RCA 293, 297, 234, 256, 257,

258, 221 Runco 220, 230, 271 SABA 223, 269, 265, 266 Sampo 281, 297, 280 Samsung 297, 239, 248, 262, 275 Sanyo 295, 233, 279, 272, 273,

274, 212 Schneider 296 Scott 297 Sharp 292, 239, 232, 208 Siemens 229 Signature 216, 292 Sony 263, 214 Sylvania 297, 225, 298 Symphonic 217, 218, 219, 291 Tatung 215 Telefunken 269, 264, 265, 266 Thomson 223, 266 Toshiba 292, 226, 267 V 209, 211, 215, 289 Videch 297, 242 Viewsonic 209, 211, 289 VIZIO 209, 211, 213, 215, 268,

289 Wards 297, 239, 232, 216 Westinghouse 211 Yamaji 298 Zenith 216, 261, 271

TV Brand name Preset code

CABLE Brand name Preset code ABC 739, 752, 753, 755, 758,

759, 762 General Instrument

722, 786, 787, 788

Hamlin 723, 724, 725, 726, 727 Hitachi 722 Jerrold 722, 728, 729, 732, 733,

734, 735, 736, 737 Magnavox 738 Motorola 748, 728 Oak 739, 742, 743 Panasonic 744, 745, 746, 747, 783,

784 Philips 763, 764, 765, 766, 767,

768 Pioneer 748, 785, 747 Radio Shack 749 RCA 744, 792, 793 Scientific Atlanta 752, 753, 754, 789 Sony 756, 757 Tocom 755 Universal 769, 772, 773, 774, 775 Viewstar 764, 766, 776, 777, 778,

779, 782

i

DBS Brand name Preset code Bell expressvu 822, 855 DirecTV 825, 832, 842, 843, 846,

848, 849, 856, 857, 858, 859, 862, 863, 864, 865, 866

Dish Network system

822, 854, 855

Dishpro 822, 854 Echostar 822, 854, 855 Expressvu 822 GE 837, 838, 839, 857, 858 General Instrument

823

Goi 822 Hitachi 824 Houston 822 HTS 822 Hughes 843, 844, 845, 846 JVC 822, 855 Magnavox 825 Panasonic 826, 829 Philips 825, 843, 844, 845, 846,

847, 848, 849, 822 Primestar 827 Proscan 837, 838, 839, 842 Radio Shack 828, 822 RCA 837, 838, 839, 842, 822 Samsung 852 SKY + 853 SKY HD 853 Sony 832, 835 Toshiba 833, 836 Uniden 825 Zenith 834

ii

LIST OF COUNTRY CODES LISTE DES CODES DE PAYS

Country/region Country code Argentina ar 0118 Australia au 0121 Austria at 0120 Belgium be 0205 Brazil br 0218 Britain gb 0702 Canada ca 0301 Chile cl 0312 China cn 0314 Denmark dk 0411 Finland fi 0609 France fr 0618 Germany de 0405 Hong Kong hk 0811 India in 0914 Indonesia id 0904 Italy es 0920 Japan jp 1016 Korea kr 1118 Malaysia my 1325 Mexico mx 1324 Netherlands nl 1412 New Zealand nz 1426 Norway no 1415 Pakistan pk 1611 Philippines ph 1608 Portugal pt 1620 Russia ru 1821 Singapore sg 1907 Spain es 0519 Sweden se 1905 Switzerland ch 0308 Taiwan tw 2023 Thailand th 2008 U.S.A. us 2119

LIST OF LANGUAGE CODES LISTE DE CODES DE LANGUES

Language Lanruage code Abkhazian ab 0102 Afar aa 0101 Afrikaans af 0106 Albanian sq 1917 Amharic am 0113 Arabic ar 0118 Armenian hy 0821 Assamese as 0119 Aymara ay 0125 Azerbaijani az 0126 Bashkir ba 0201 Basque eu 0521 Bengali bn 0214 Bhutani dz 0426 Bihari bh 0208 Bislama bi 0209 Breton br 0218 Bulgarian bg 0207 Burmese my 1325 Byelorussian be 0205 Cambodian km 1113 Catalan ca 0301 Chinese zh 2608 Corsican co 0315 Croatian hr 0818 Czech cs 0319 Danish da 0401 Dutch nl 1412 English en 0514 Esperanto eo 0515 Estonian et 0520 Faroese fo 0615 Fiji fi 0609 Finnish fi 0609 French fr 0618 Frisian fy 0625 Galician gl 0712 Georgian ka 1101 German de 0405 Greek el 0512 Greenlandic kl 1112 Guarani gn 0714 Gujarati gu 0721 Hausa ha 0801 Hebrew iw 0923 Hindi hi 0809 Hungarian hu 0821 Icelandic is 0919 Indonesian in 0914 Interlingua ia 0901 Interlingue ie 0905 Inupiak ik 0911 Irish ga 0701

Italian it 0920 Japanese ja 1001 Javanese jw 1023 Kannada kn 1114 Kashmiri ks 1119 Kazakh kk 1111 Kinyarwanda rw 1823 Kirghiz ky 1125 Kirundi rn 1814 Korean ko 1115 Kurdish ku 1121 Laotian lo 1215 Latin la 1201 Latvian lv 1222 Lingala ln 1214 Lithuanian lt 1220 Macedonian mk 1311 Malagasy mg 1307 Malayalam ml 1312 Maori mi 1309 Marathi mt 1320 Moldavian mo 1315 Mongolian mn 1314 Nauru na 1401 Nepali ne 1405 Norwegian no 1415 Occitan oc 1503 Oriya or 1518 Oromo om 1513 Panjabi pa 1601 Pashto, Pushto ps 1619 Persian fa 0601 Polish pl 1612 Portuguese pt 1620 Quechua qu 1721 Rhaeto-Romance rm 1813 Romanian ro 1815 Russian ru 1821 Samoan sm 1913 Sangho sg 1907 Sanskrit sa 1901 Scots-Gaelic gd 0704 Serbian sr 1918 Serbo-Croatian sh 1908 Sesotho st 1920 Setswana tn 2014 Shona sn 1914 Sindhi sd 1904 Sinhalese si 1909 Siswati ss 1919 Slovak sk 1911 Slovenian sl 1912 Somali so 1915

Language Lanruage code Spanish es 0519 Sudanese su 1921 Swahili sw 1923 Swedish sv 1922 Tagalog tl 2012 Tajik tg 2007 Tamil ta 2001 Tatar tt 2020 Telugu te 2005 Thai th 2008 Tibetan bo 0215 Tigrinya ti 2009 Tonga to 2015 Tsonga ts 2019 Turkish tr 2018 Turkmen tk 2011 Twi tw 2023 Ukrainian uk 2111 Urdu ur 2118 Uzbek uz 2126 Vietnamese vi 2209 Volapk vo 2215 Welsh cy 0325 Wolof wo 2315 Xhosa xh 2408 Yiddish ji 1009 Yoruba yo 2515 Zulu zu 2621

Language Lanruage code

iii

2008 All rights reserved.

UC

OWNERS MANUAL MODE DEMPLOI

DVX-700 (DVR-700 + NS-PSW700 + NS-P700)

DVD HOME THEATER SYSTEM SYSTEME HOME CINEMA AVEC LECTUER DVD

D V

X -700

Printed in China WQ33520

LASER INFORMATION INFORMATION LASER

The name plate is located on the rear panel of the DVD controller.

Manualsnet FAQs

If you want to find out how the DVR-700 Yamaha works, you can view and download the Yamaha DVR-700 Theater System Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha DVR-700 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha DVR-700. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha DVR-700 Theater System Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha DVR-700 Theater System Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha DVR-700 Theater System Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha DVR-700 Theater System Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha DVR-700 Theater System Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.