Contents

Yamaha NS-WSW121 Subwoofer Owner's Manual PDF

1 of 67
1 of 67

Summary of Content for Yamaha NS-WSW121 Subwoofer Owner's Manual PDF

Front Surround System

Owners Manual

Read the supplied booklet Quick Start Guide before using the unit.

English EN

En 2

Contents PREPARATION

Supplied items .......................................................................3 Features ..................................................................................4 Frequently asked questions..................................................5 Part names and functions .....................................................6 Installation .............................................................................9

Installing the center unit on a TV stand, etc............................................. 10

Mounting the center unit on a wall............................................................. 10

Connecting the unit ............................................................ 12 Connecting the unit to a TV ........................................................................... 12

Connecting playback devices........................................................................ 13

Turning on the unit............................................................. 15 Displaying the menu screen on the TV ...................................................... 16

Screen displayed on a TV when the unit is turned on .......................... 17

PLAYBACK

Operations........................................................................... 18 Operating the unit by TVs remote control (HDMI control) ................ 22

Wireless playback of audio via Bluetooth connection .... 23 Listening to the sound from a Bluetooth device (Receiving) ............ 24

Using wireless headphones to listen to audio (Transmitting)........... 25

NETWORKS

Networks.............................................................................. 26 Network functions and the MusicCast CONTROLLER app .................. 26

Connecting to a network ................................................................................ 26

Playing back music stored on media servers (PCs/NAS)...................... 39

Listening to Internet radio.............................................................................. 40

Playing back music with AirPlay ................................................................... 41

Playing back music stored on mobile devices ........................................ 42

SETTINGS

Settings................................................................................ 43 Setup menu.......................................................................................................... 43

Configuring 4K video mode........................................................................... 51

Updating the units firmware ........................................................................ 52

Initializing the unit............................................................................................. 53

APPENDIX

Troubleshooting ................................................................. 54 Pairing the center unit and subwoofer ...................................................... 62

Specifications ...................................................................... 63

About this manual NOTE This indicates precautions for use of the product and its feature limitations.

HINT This indicates supplementary explanations for better use.

PREPARATION

Supplied items Make sure you have received all of the following items.

The YAS-706

Supplied accessories

Preparing the remote control Peel off the protection sheet before use.

Operating range of the remote control Operate the remote control within the range as shown below. When the center unit is mounted on a wall, point the remote control at the remote control sensor on the top panel (p. 10).

Center unit (YAS-CU706) Wireless subwoofer (NS-WSW121)

Remote control Batteries x 2 (AAA, R03, UM4)

Optical digital audio cable* (1.5 m [4.9 ft])

Mounting template Use when mounting the center unit on a wall

Spacers 2 Use when mounting the

center unit on a wall

Quick Start Guide

Cover (for the TV remote repeater)

MusicCast Setup Guide Owners Manual CD-ROM

* The China model comes with a coaxial digital audio cable rather than an optical digital audio cable.

Remote control sensor Within 6 m (20 ft)

PREPARATION Supplied items En 3

Features This front surround system is easily installed and has a built-in subwoofer for enjoying powerful and realistic sound with connection to a TV or other devices.

* In this manual, iOS and Android mobile devices are collectively referred to as mobile devices. The specific type of mobile device is noted in explanations as needed.

AIR SURROUND XTREME Enjoy 7.1 channel surround sound, which creates a wide and deep soundstage, as if speakers are positioned not only in front of, but also to the left, right, and behind the listener.

Bass extension Enjoy powerful bass with Yamahas exclusive bass boosting technology, Advanced Bass Extension Processing (p. 19).

Unrestricted playback of music over a network using MusicCast CONTROLLER The free app for mobile devices*, MusicCast CONTROLLER, allows you to listen to music stored on mobile devices such smartphones, or on servers, or to listen to Internet radio stations and many kinds of major streaming services (p. 26). This app also allows you to distribute content to other MusicCast-enabled devices for synchronized playback. The MusicCast CONTROLLER app can also be used to perform such tasks as selecting the input source and adjusting volume.

See the MusicCast Setup Guide, or visit the Yamaha website for details. Search for MusicCast CONTROLLER on the App Store or Google Play.

Transmission of 4K high dynamic range (HDR) video supported Enjoy high-resolution video from a cable or satellite set-top box, or a BD/DVD player. When a TV that supports Audio Return Channel (ARC) is used, this ARC-compatible unit can be connected to the TV via a single HDMI cable (p. 12).

HDMI control function Link functions of a TV and the unit are available using the TVs remote control (p. 22).

Clear voice This feature makes speech, such as dialog and narration, clearer (p. 19).

PREPARATION Features En 4

Frequently asked questions The following section covers popular functions and frequently asked questions about the unit.

Q1 Switching between remote controls is inconvenient. Can I use the TVs remote control to operate the unit?

A1 Yes. When the unit is connected to a TV via HDMI cable, the TVs remote control can be used to operate both the TV and the unit (p. 22).

Q2 Can I improve the clarity of dialogue?

A2 Yes. Dialogue in movies, TV news, sports programs, etc., can be made clearer using the clear voice function (p. 19).

Q3 Can I operate the unit using a smartphone?

A3 Yes. The unit can be operated with a smartphone or other mobile device using the free mobile device app, MusicCast CONTROLLER, installed on the device (p. 26). The MusicCast CONTROLLER app allows you to perform such tasks as turning the unit on or off, selecting the input source, and adjusting the volume.

Q4 Can headphones be used?

A4 Yes. Bluetooth wireless headphones can be used (p. 25).

Q5 Can sound playing via the unit be played on another audio device at the same time, or vice versa?

A5 Yes. Sound from one MusicCast-enabled audio device can be played on another MusicCast-enabled audio device at the same time. Note that all devices must support MusicCast. Tap in the MusicCast CONTROLLER apps Rooms screen, and follow the on-screen instructions to set up the master room (the source device) and to link other rooms (devices to which audio is distributed) with the master room. Refer to the supplied MusicCast Setup Guide, or visit Yamahas website for details.

Q6 How can music content stored on a smartphone be played via the unit?

A6 Choose one of the following methods. Connecting via Bluetooth (p. 24) This method is useful for playing music content stored on a smartphone or other mobile device without connecting to a network. Playing music with AirPlay (p. 41) This method is useful for those using an iPhone or other iOS device. Playing music with the MusicCast CONTROLLER app (p. 42) This method is useful for playing music content stored on a smartphone or other mobile device on which the MusicCast CONTROLLER app is installed.

Q7 Can Internet radio be played?

A7 Yes. Use the MusicCast CONTROLLER apps Net Radio feature (p. 40).

PREPARATION Frequently asked questions En 5

Part names and functions Center unit (front panel/top panel)

1 Indicators The indicators on the top panel flash or glow, to show the operation and setting status. In this manual, illustrations of the nine in-line indicators are used for explanation as necessary.

Example: When the STATUS indicator glows, and the indicator flashes

2 CONNECT key Use to connect the unit to a network using the MusicCast CONTROLLER app (p. 27).

3 (input) key Select an input source to be played back (p. 18).

4 (mute) key Mute the audio output. Press the key again to unmute (p. 20).

5 / (volume +/-) keys Adjust the volume (p. 20).

6 (power) key Turn on or off the unit (p. 18).

HINT The unit may automatically turn off when the auto power

standby function is enabled (p. 50).

7 Remote control sensors Receive infrared signals from the remote control of the unit (p. 3) or TVs remote control (p. 10). The remote control sensors are located on the front panel and on the top panel of the center unit (p. 10).

8 Dual built-in subwoofers The built-in subwoofers are located in the top part of the center unit.

9 Speakers

9

8 7

7

8

9

STATUS TV HDMI1 HDMI2

COAXIAL BLUETOOTH NET

SURROUNDANALOG CONNECT

1 2 3 4 5 6 Keys are located in the rear part of the center unit.

: Off : Glows : Flashes

PREPARATION Part names and functions En 6

Center unit (rear panel)

1 Power cable For connecting to an AC wall outlet (p. 14).

2 TV remote repeater Used to transmit signals from the TVs remote control, received by the units remote control sensor, to the TV (p. 10).

3 HDMI OUT (ARC) jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p. 12).

4 HDMI IN 1 and 2 jacks For connecting HDMI-compatible playback devices such as a BD/DVD player, a satellite and cable TV tuner, and a game console (p. 13).

5 TV input jack For connecting to a TV with an optical digital audio cable (p. 12).

6 COAXIAL input jack For connecting to a playback device, such as a Blu- ray Disc (BD) player, with a coaxial digital audio cable (p. 13).

7 NETWORK jack For connecting to a network with a network cable (p. 26).

8 ANALOG input jacks For connecting to an external device with a stereo cable (p. 12, 14).

9 SUBWOOFER OUT jack For connecting to the supplied subwoofer using a wired connection (p. 15).

0 SYSTEM CONNECTOR jack For connecting to the supplied subwoofer using a wired connection (p. 15).

A UPDATE ONLY jack Use to update this units firmware (p. 53).

HDMI

IN 2IN 1OUT (ARC) TV COAXIAL NETWORK ANALOG

R

SUBWOOFER OUT

SYSTEM CONNECTOR UPDATE ONLY

L

53 6 7 84 9 0 A

21

PREPARATION Part names and functions En 7

Subwoofer (rear panel)

1 Power cable For connecting to an AC wall outlet (p. 14).

2 SUBWOOFER PAIRING key Used to pair the center unit with the subwoofer manually (p. 62). Use a pin or other pointed object to press this key.

3 STATUS indicator Shows subwoofers connection status (p. 15). Glows green: Power on Glows red: Power off

4 SYSTEM CONNECTOR jack For connecting to the center unit using a wired connection (p. 15).

5 INPUT jack For connecting to the center unit using a wired connection (p. 15).

SYSTEM CONNECTOR

SUBWOOFER PAIRING

INPUTSTATUS

SYSTEM CONNECTOR

SUBWOOFER PAIRING

INPUTSTATUS

2 3 4 5

1

PREPARATION Part names and functions En 8

Installation Position the center unit and subwoofer as shown below with installation.

Wireless connections The center unit and subwoofer communicate wirelessly. Subwoofer performance may be affected if the subwoofer is placed on a metal rack, or if there is a metal plate between the subwoofer and the center unit. Use a wired connection to connect the subwoofer to the center unit if sounds are interrupted due to the installation condition (p. 15).

Cautions Be sure to install the center unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children. Do not stack the center unit and subwoofer directly on top of other playback devices, or vice versa. Doing so may cause a malfunction due to heat and vibrations. Do not hold the speaker portion (fabric parts) on the front and the top of the center unit. The center unit and subwoofer contain non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk drive, etc.) near the unit. Depending on your installation environment, it may be better to connect the unit and external devices before installing the unit.

The center unit can be installed on a TV stand (p. 10) or mounted on a wall (p. 10). It is equipped with remote sensors positioned to support installation on a TV stand or mounting on a wall.

To prevent sound reflecting off of walls, angle the subwoofer slightly toward the center of the room.

Center unit

Subwoofer

PREPARATION Installation En 9

Position the center unit so that the keys are on the far side of the center unit.

About the TV remote repeater The center unit receives signals from the TVs remote control via the remote control sensor located on the front panel. It then transmits these signals from the TV remote repeater located on the rear panel.

HINT This function is available only when the TVs remote control uses infrared signals. The TVs remote control can be used even when the unit is turned off as long as the units power cable is

plugged into an AC wall outlet.

Mount the center unit on the wall so that the keys face upwards.

Installing the center unit on a TV stand, etc.

Caution Position the center unit more than 5 cm (2 in) away from the TV to ensure proper transmission of signals from the remote control to the remote control sensor on the TV.

Remote control sensor (front panel)

Keys

TV remote repeater

TVs remote control

More than 5 cm (2 in)

TV remote control sensor

Mounting the center unit on a wall

Cautions When mounting the center unit on a wall, all installation work must be performed by a qualified

contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the center unit to fall, resulting in personal injury.

To avoid falling the center unit, attach the center unit to a dry wall. Make sure you use commercially available screws that can support the weight of the installation

(specified in Step 2 on the next page). Using clamps other than specified screws, such as short screws, nails, and two-sided tape, may cause the center unit to fall.

Fix the cables in place where they will not become loose. If your foot or hand accidentally gets caught on a loose cable, the center unit may fall.

Do not lean on the center unit or apply excessive force to the top of the unit. Doing so may cause the center unit to fall.

Check that the center unit is fixed securely after the installation. Yamaha will bear no responsibility for any accidents caused by improper installations.

Keys Remote control sensor (top panel)

PREPARATION Installation En 10

How to mount the center unit on the wall

1 Attach the mounting template on a wall and mark for the screw holes.

2 Remove the mounting template from the wall, then install commercially available screws (as illustrated below) at the points marked on the wall.

3 Peel off the backing paper from the spacers and attach the adhesive face to the center unit as illustrated below.

4 Hang the center unit on the screws.

Using the supplied cover (for the TV remote repeater) When the center unit is mounted on a wall, the TV remote repeater may appear white. If this presents a distraction while watching TV, attach the supplied cover to the TV remote repeater.

Tapes or thumbtacks

Mounting template (supplied)

Screw holes

7 to 9 mm (1/4" to 3/8")

13 to 15 mm (1/2" to 5/8")

4 mm (#8)

20 mm (3/4") or more

Spacers

Mounting holes on bottom of the

unit

Cover (for the TV remote repeater) Peel off the backing and attach the sticky sheet.

TV remote repeater

PREPARATION Installation En 11

Connecting the unit

Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.

HINT Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is

recommended to prevent degradation of signal quality. For playback of 3D and 4K video content, use a high-speed HDMI cable. This unit supports HDCP version 2.2, a copy protection technology. For playback of 4K video, connect the

unit to the HDMI input jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV. To play 4K (4:4:4) video content, set 4K MODE to MODE 1 (p. 51).

TVs that support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied).

When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI control function (p. 46).

HINT Use an ARC-compatible HDMI cable.

TVs that do not support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied) and an optical digital audio cable.

TV audio will be output through the unit by switching the units input to TV using the TV key on the remote control.

HINT If the TV has no optical jack

Connect the audio output jack on the TV to the ANALOG input jacks or COAXIAL input jack on the unit. TV audio will be output through the unit by switching the units input to ANALOG or COAXIAL using the ANALOG or COAXIAL key on the remote control accordingly.

Connecting the unit to a TV

What is Audio Return Channel (ARC)? In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV.

HDMI (ARC)

OUT (ARC)

HDMI HDMI

Center unit (rear)

HDMI OUT (ARC) jack ARC-compatible HDMI input

TV

HDMI

OUT (ARC)

OPTICAL

TV

HDMI HDMI

OO

Center unit (rear)

HDMI OUT (ARC) jack HDMI input

TV input jack Audio output (optical digital)

TV

1. Remove the cap 2. Check the direction of the plug

PREPARATION Connecting the unit En 12

Connect video devices such as BD/DVD players, cable or satellite set-top boxes (STBs), and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack.

HDMI connection Connect a video device to the unit with an HDMI cable (not supplied).

NOTE This unit supports HDCP version 2.2, a copy protection technology.

The audio/video played on the video device will be output though the unit by switching the units input to HDMI 1 or 2 using the HDMI 1 or 2 key on the remote control.

HINT Once the HDMI control function has been activated (p. 46), video and audio content from playback devices

can be output from the TV even when this unit is off (HDMI signal pass-through). Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is

recommended to prevent degradation of signal quality. For playback of 3D and 4K video content, use a high-speed HDMI cable.

Coaxial connection Connect a video device to this unit via a coaxial digital cable. Next, connect the video devices video output to the TVs video input.

The audio played on the video device will be output though the unit by switching the units input to COAXIAL using the COAXIAL key on the remote control.

Connecting playback devices

HDMI

IN 1 IN 2

HDMI

HDMI

HDMI

Center unit (rear)

HDMI IN 1 and 2 jacks HDMI output

Video device

COAXIAL

COAXIAL

C C

Center unit (rear)

COAXIAL input jack Audio output

(coaxial digital)

Video device

TV

To video output jack

To video input jack

PREPARATION Connecting the unit En 13

Analog connection Connect a video device to this unit via a stereo cable (not supplied). Next, connect the video devices video output to the TVs video input.

The audio played on the video device will be output though the unit by switching the units input to ANALOG using the ANALOG key on the remote control.

Connecting the power cable After all the connections are complete, plug in the power cable of the center unit and the subwoofer.

AUDIO

R

L

ANALOG

R L

R L

L

R

Center unit (rear)

ANALOG input jacks

Audio output (analog)

Video device

TV

To video output jack

To video input jack

SYSTEM CONNECTOR

SUBWOOFER PAIRING

INPUTSTATUS

Center unit (rear)

To an AC wall outlet

Subwoofer (rear)

To an AC wall outlet

PREPARATION Connecting the unit En 14

z

Turning on the unit This section explains initial setup of the unit, performed when it is turned on for the first time after purchase.

1 Press the z key to turn on the unit. When the center unit is turned on, the center unit and subwoofer are automatically connected via wireless connection. Once the connection has been successfully established, the STATUS indicator on the subwoofer glows as shown in the illustration below, and the unit is ready for play back.

NOTE If the STATUS indicator does not glow properly the first time the unit is

turned on, pair the center unit and subwoofer manually. See Pairing the center unit and subwoofer (p. 62).

STATUS

STATUS indicator

Glows green

Wired connection If there is no sound coming from the subwoofer, or if sound is intermittent, due to the influence of radio waves from other devices, connecting the center unit and subwoofer via cables will solve the problem. Connect the center unit and subwoofer via an RCA mono cable (not supplied) and a 3.5 mm monaural mini plug cable (not supplied). A 3.5 mm monaural mini plug cable is required to turn the center unit and subwoofer on and off at the same time.

To connect the center unit and subwoofer using a wired connection, set Bass Out of Subwoofer in the setup menu to Wired (p. 45). When the center unit is turned on, the subwoofer turns on and its STATUS indicator glows green.

NOTE Be sure the center unit is turned off before connecting the subwoofer. The subwoofer supplied with the unit can only be connected.

SYSTEM CONNECTOR

SUBWOOFER PAIRING

INPUTSTATUS

SYSTEM CONNECTOR

SUBWOOFER OUT

INPUTSYSTEM CONNECTOR

RCA mono cable

3.5 mm monaural mini plug cable

PREPARATION Turning on the unit En 15

SETUP

Visual operation of this unit is possible by displaying its menu screen on the TV. Turn on the unit and the TV, and then use the input button on the TVs remote control to switch input so that video input from this unit is displayed. When this unit and the TV are connected as shown below, select HDMI 1 using the TVs remote control.

The menu display The menu is displayed on the TV screen when the SETUP key is pressed. When the TV is receiving HDMI signals, the menu is superimposed over video content. Press the SETUP key a second time to cancel menu display.

Displaying the menu screen on the TV

TV remote control (example)

Switch input sources

OUT (ARC)

HDMI INPUT 1 2 3

HDMI

HDMI

TV Center unit (rear)

PREPARATION Turning on the unit En 16

SETUP

RETURN

/ ENTER

When the unit is turned on for the first time after purchase, the screen shown below will be displayed on the TV and the indicator will be flashing.

Follow the on-screen instructions to use an iOS device (iPhone, etc.) to connect the unit to a wireless network (p. 41)). Connecting the unit to a wireless network is simpler when the MusicCast CONTROLLER app installed on your mobile device is used. Press the RETURN key to cancel this screen, and then refer to p. 27.

HINT This screen will not be displayed and the indicator will not be flashing if the

unit is connected to a router via its NETWORK jack (wired connection).

Selecting a language for menu display

1 Turn the unit and TV on.

2 Switch the TVs input to display video input from this unit (p. 16).

3 Press and hold the SETUP key until the OSD Language menu appears on the TV.

HINT When the menu is not displayed Confirm the following cases.

The HDMI input jack of your TV and the HDMI OUT (ARC) jack of the unit are connected.

The input of your TV is set to HDMI 1 (example).

4 Use the / key to select the desired language and press the ENTER key. Settings ENGLISH (default), FRANAIS, ESPAOL

5 Press the SETUP key to exit the setup menu.

Screen displayed on a TV when the unit is turned on

PREPARATION Turning on the unit En 17

PLAYBACK

Operations

1

2

Remote control signal transmitter Transmits infrared signals.

(power) key Turns on or off the unit.

Turned on

Turned off (when the HDMI control function (p. 46) or network standby function (p. 49) is enabled)

Turned off

The indicator for the last input source selected glows.

Indicates the surround setting, and network (p. 26) or Bluetooth (p. 24) connection status.

Glows (red)

1 Input keys Select an input source to be played back. TV .............................TV audio or sound from a device

connected to the units TV input jack

HDMI 1, HDMI 2 .......Sound from a device connected to the HDMI IN 1 or HDMI IN 2 jack

COAXIAL .................Sound from a device connected to the COAXIAL input jack

ANALOG ..................Sound from a device connected to the ANALOG input jacks

BLUETOOTH ...........Sound from a Bluetooth connected device

NET ..........................Audio acquired via a network The last audio source listened to is selected when the NET key is pressed.

The indicator for the selected input source glows. (Example: when TV is selected)

HINT To play sound from the device connected to the TV or to

watch video from the device, set the TVs input source to the playback device.

For playback from a Bluetooth device, refer to page 24. For audio playback via a network, refer to pages 39 to 42.

TV HDMI1 HDMI2

COAXIAL BLUETOOTH NET

ANALOG

HDMI 1 (green) HDMI 2 (red)

BLUETOOTH (green) NET (red)

2

PLAYBACK Operations En 18

3

4

5

6

7

Surround program keys and STEREO key Select surround playback using the MOVIE, MUSIC, SPORTS, GAME or TV PROGRAM key, or select stereo (2 channels) playback using STEREO key. When a surround program (MOVIE, MUSIC, SPORTS, GAME, or TV PROGRAM) is selected, you can enjoy a realistic sound effect using Yamahas exclusive AIR SURROUND XTREME.

MOVIE, MUSIC, SPORTS, GAME, or TV PROGRAM ............................ Glows (surround playback)

STEREO.............. Off (stereo playback)

HINT Dolby Pro Logic II is used when 2-channel stereo signal is

played with a surround program other than MUSIC.

SURROUND

SURROUND

3

BASS EXTENSION key Enable/disable the bass extension function. When this function is enabled, you can enjoy a powerful bass sound with the Yamaha original bass boost technology Advanced Bass Extension Processing.

Enabled: Flashes three times and goes out Disabled: Flashes once and goes out

4

/ / / keys, ENTER key, RETURN key Use to configure the setup menu.

5

SETUP key Display the setup menu on the TV.

6

CLEAR VOICE key Enable/disable the clear voice function. When this function is enabled, human voices such as lines in movies and TV shows, or news and sport commentary, are played clearly.

Enabled: Flashes three times and goes out Disabled: Flashes once and goes out

7

PLAYBACK Operations En 19

8

9

SUBWOOFER (+/) keys Adjust the volume of the subwoofer.

MUTE key Mute the audio output. Press the key again to unmute.

VOLUME (+/) keys Adjust the volume of the unit.

Volume down () Volume up (+)

Flash (on mute)

Volume down () Volume up (+)

8 NET RADIO (13) keys Assign audio input via a network (Internet radio stations, music files stored on media servers, etc.) to the NET RADIO key.

Assign a station 1 Play the desired Internet radio station (p. 39

to 42). 2 Hold down the NET RADIO 1, 2, or 3 key for

more than 3 seconds.

Tune-in to an assigned Internet radio station 1 Press the NET RADIO 1, 2, or 3 key to which

the desired Internet radio station has been assigned.

HINT When an Internet radio station is assigned to the NET

RADIO 1, 2, or 3 key on the remote control, the same station is also registered with No. 1, 2, or 3 in the MusicCast CONTROLLER apps Favorites. When an Internet radio station is registered with No. 1, 2, or 3 in Favorites with the MusicCast CONTROLLER app, the same station is also assigned to the NET RADIO 1, 2, or 3 key on the remote control.

9

PLAYBACK Operations En 20

INFO key While the INFO key is held down, status, including the type of audio signal being input and whether the clear voice function is enabled or disabled, can be confirmed by the glowing of indicators.

Type of audio signal being input TV audio input signal with the ARC function activated

DTS digital surround, DTS 96/24, DTS Express, DTS-HD High Resolution, or DTS-HD Master Audio

Dolby Digital, Dolby Digital Plus, or Dolby TrueHD

Dolby Pro Logic II is used (when 2-channel stereo signal is played with a surround program other than MUSIC)

Unit functions and positioning The bass extension function is enabled

The clear voice function is enabled

When positioned on top of something, such as a TV stand

When mounted on a wall

HINT The unit is able to play the following types of audio signal. The indicators do not glow when analog or PCM audio signal is input.

Green

Green

Green

Green

Green

Green

Green

Blue

Analog signal PCM (2 channels, multi-channels) Dolby Digital Dolby Digital Plus

Dolby TrueHD DTS digital surround DTS 96/24

DTS Express DTS-HD High Resolution DTS-HD Master Audio

10

10

PLAYBACK Operations En 21

The HDMI control function (link function) coordinates operation of a TV and the unit so that the unit can be operated using the TVs remote control. When a TV is connected to the unit with an HDMI cable (p. 12), the TVs remote control can be used to perform the following operations.

Coordinated functions via the TV remote control HINT Even if your TV supports the HDMI control function, some functions may not be available. For details, refer

to documentation supplied with your TV. We suggest using devices (TV, BD/DVD player, etc.) from the same manufacturer.

Operating the unit by TVs remote control (HDMI control)

Remote control of TV (Example)

2. Switch input sources The units input source switches accordingly when the TVs input source

is switched. Examples When a TV program is selected on the TV, the units audio input

source is switched to the HDMI OUT (ARC) jack using the ARC function or TV jack.

When a BD/DVD player is connected to the HDMI IN 12 jack on the unit, the units input source switches to HDMI when the BD/DVD player is selected with the TVs remote control.

The input source can be switched while the unit is off.

1. Turn on/off Both the TV and this unit turn on/off at the same time.

3. Switch the audio output device (TV or this unit (amplifier))

4. Adjust volume This unit's volume can be adjusted when the TVs audio output is set to this unit (amplifier).

If the unit cannot be operated with the TVs remote control Confirm the settings are properly configured as described below. The HDMI control function of this unit is enabled (p. 46). The HDMI control function is enabled on the TV.

Examples of TV settings From the setup menu on your TV, select Link setting HDMI control setting, then set a setting

such as HDMI control function to ON. Set audio output to any option other than TV.

If the unit cannot be operated with the TVs remote control even after the settings described above have been applied correctly: Turn off this unit and the TV, and then turn them back on again. Disconnect the power cable of the unit and external devices connected to the unit via HDMI cable. Plug

them in again after about 30 seconds.

PLAYBACK Operations En 22

Wireless playback of audio via Bluetooth connection The unit can be used to receive and play audio from a Bluetooth device, and to transmit audio for playback on a Bluetooth device. See documentation supplied with your Bluetooth device for more information.

Receiving audio from a Bluetooth device Audio from a Bluetooth device, such as a mobile device or a digital music player, can be played over a wireless connection.

Transmitting audio to a Bluetooth device Use Bluetooth wireless headphones and the like to listen to audio.

NOTE Audio cannot be received by the unit from mobile devices and the like, and transmitted to speakers or

headphones at the same time.

HINT Bluetooth in the setup menu must be set to On (default; p. 46) to use Bluetooth functions. A Bluetooth device that has been assigned a passkey (PIN) other than 0000 cannot be connected to the

unit. Be sure that the Bluetooth device is no farther than 10 m (33 ft) from the unit when connecting the two. Refer to Bluetooth (p. 58) in Troubleshooting if a Bluetooth connection cannot be established. Adjust the Bluetooth devices volume as needed.

Bluetooth device (such as a mobile device)

Bluetooth speakers/ headphones

PLAYBACK Wireless playback of audio via Bluetooth connection En 23

Audio from a Bluetooth device, such as a mobile device or a digital music player, can be played over a wireless connection.

NOTE Adjust the volume level of the Bluetooth device as required. When the network standby function (p. 49) is enabled, the unit turns on with operation of the Bluetooth

device.

1 Press the BLUETOOTH key on the units remote control to select Bluetooth as the input source. The BLUETOOTH/NET indicator on the unit glows green.

If a Bluetooth device has been connected before, the unit will connect to the last connected device when the BLUETOOTH key is pressed. Terminate this connection to connect a new device.

2 Enable the Bluetooth function on the Bluetooth device.

3 Select YAS-706 xxxxxx Bluetooth* in the Bluetooth device list on the device. * If the unit is registered as a MusicCast-enabled device (p. 27), the room name (network

name) is displayed.

If a passkey (PIN) is required, enter the number 0000.

When the connection is established, the indicator on the unit glows.

The indicator or a completion message is displayed on the Bluetooth device.

4 Play back a song on the Bluetooth device.

Terminating Bluetooth connection Perform one of the following operations to terminate Bluetooth connection. The indicator on the unit turns off when the connection is terminated. Turn off the Bluetooth function on the Bluetooth device. Press the BLUETOOTH key on the units remote control for more than 3

seconds. Switch the unit's input source to any input source other than Bluetooth. Turn off the unit.

Listening to the sound from a Bluetooth device (Receiving)

BLUETOOTH NET

YAS-706 xxxxxx Bluetooth

PIN 0 0 0 0

1 2 3 4 5 6 7 8 9

0

Blue

PLAYBACK Wireless playback of audio via Bluetooth connection En 24

SETUP

/ ENTER

Input keys

Bluetooth wireless headphones can be used to listen to audio played via the unit.

NOTE Use a Bluetooth device that supports the A2DP profile. Audio input using AirPlay, or from a Bluetooth device, cannot be transmitted to

other Bluetooth devices for playback.

HINT Audio will also be output from the unit. The MusicCast CONTROLLER app installed on your mobile device (p. 26) can

also be used to transmit audio to a Bluetooth device.

1 Turn on the Bluetooth device.

2 Select the input source (other than Bluetooth) with the input keys.

3 Press the SETUP key. The setup menu is displayed on the TV screen.

4 Use the / keys to select Bluetooth, and then press the ENTER key.

5 Use the / keys to select Transmission, and then press the ENTER key.

6 Use the / keys to select On, and then press the ENTER key.

7 Use the / keys to select Device Search, and then press the ENTER key.

8 Use the / keys to select a Bluetooth device, and then press the ENTER key.

When a connection is established, the indicator on the unit glows.

9 Play an audio source, and enjoy music via the Bluetooth device.

HINT Not found is displayed on the screen with step 8 if the unit was unable to find a

device to which to connect. No Device Name replaces the device name on the screen with step 8 if the unit

is unable to recognize the name of the device.

Terminating Bluetooth connection Perform one of the following operations to terminate Bluetooth connection. The indicator on the unit turns off when the connection is terminated. Terminate Bluetooth connection from the Bluetooth device,

or turn off the Bluetooth device.

Set Transmission in the setup menu to Off. Press the BLUETOOTH key on the units remote control for

more than 3 seconds. Turn off the unit.

Using wireless headphones to listen to audio (Transmitting)

Blue

PLAYBACK Wireless playback of audio via Bluetooth connection En 25

NETWORKS

Networks

A network connection allows you to listen to Internet radio stations or music streaming services, and to use AirPlay to play music files, or to play music files stored on your computer (media server) via this unit. Most playback requires the MusicCast CONTROLLER app for mobile devices. Install and use the MusicCast CONTROLLER app on your mobile device to play music files.

Proceed from network connection to playback in the following sequence.

* AirPlay can be used to play music files without using the MusicCast CONTROLLER app.

NOTE To use network function, the unit, your PC and mobile device must be connected to the same router. Make

sure whether the network parameters (such as the IP address) are properly assigned to the unit in Information (p. 47) in the setup menu.

When using a multiple SSID router, access to the unit might be restricted depending on the SSID to connect. Connect the unit and mobile device to the same SSID.

Some security software installed on your computer, or network device settings (such as a firewall), may block the units access to your computer or Internet radio stations. Should this occur, change security software and/or network device settings.

A network connection cannot be established if the MAC address filter on your router is enabled. Check your routers settings.

To configure your routers subnet mask manually, apply the same subnet used by this unit to all devices. Use of a broadband connection is recommended when using Internet services.

HINT If your router supports DHCP, network settings for the unit need not be configured. Network parameters

(such as the IP address) will be assigned automatically. If your router does not support DHCP, or if you prefer to configure network parameters manually, you must configure network settings yourself (p. 48).

Choose a wired or wireless network connection based on your network environment.

Wired network connections To use a wired network connection, connect the unit to a router via an STP network cable (category 5 or higher straight cable; not supplied).

HINT If the unit is already connected to a wireless network and you would like to switch to a wired connection,

change Network in the setup menu to Wired.

Network functions and the MusicCast CONTROLLER app

a Choose a wired network connection (p. 26) or a wireless network connection (p. 27).

b Use the MusicCast CONTROLLER app to connect the unit to a network, and register the unit as a MusicCast-enabled device (p. 27).

c Use the MusicCast CONTROLLER app to play music over a network* (p. 39 to 42).

Connecting to a network

NETWORK

LAN

WAN

Internet

PC

Network cable

Modem

Mobile device

Router

Network Attached Storage (NAS)

NETWORKS Network functions and the MusicCast CONTROLLER app En 26

Wireless network connections Connect the unit to a wireless router (access point) to use a network. Refer to the following for instructions on connecting to a wireless router (access point).

Using the MusicCast CONTROLLER app (p. 27) Using connection methods other than the MusicCast CONTROLLER app (p. 30 to 36)

The indicator on the unit glows when the unit is connected to a wireless network.

NOTE You cannot use the wireless network connection simultaneously with the wired network connection or

Wireless Direct (p. 37). If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless

router (access point). In such case, place them close to each other.

HINT If the unit will not be connected to a wireless router (access point), Wireless Direct (p. 37) can be used to

connect the unit directly to a mobile device to control the unit using the MusicCast CONTROLLER app installed on that mobile device.

Connecting with the MusicCast CONTROLLER app (registering the unit as a MusicCast-enabled device) Install the MusicCast CONTROLLER app on your mobile device to connect the unit to a network and register it as a MusicCast-enabled device.

HINT Confirm that your mobile device is connected to your home router before beginning. This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples. MusicCast CONTROLLER app screens and menu labels are subject to change without prior notice.

1 Install the MusicCast CONTROLLER app on your mobile device, and open the app. Search for MusicCast CONTROLLER on the App Store or Google Play.

2 Tap Setup.

Internet

Wireless router (access point)

Modem

Mobile device

Green

NETWORKS Connecting to a network En 27

3 Turn on the unit, and then tap Next.

4 Hold down the CONNECT key on the unit until the indicator on the unit starts flashing.

5 Follow the on-screen instructions to configure network settings.

HINT When a screen like that below is displayed, follow the on-screen instructions to configure network

settings.

When a screen like that at left below is displayed, select the network to which the unit will be connected and enter the routers password (encryption key). The routers password (encryption key) is often noted on the router itself. Refer to documentation supplied with the router for details.

1. Use the Home button on your mobile device to return to the Home screen.

2. Select Wi-Fi from Settings. 3. Select MusicCastSetup from CHOOSE A

NETWORK.... 4. Use the Home button to return to the MusicCast

CONTROLLER app.

NETWORKS Connecting to a network En 28

6 To register the unit as a MusicCast-enabled device, configure the following items. Location name (home, Johns house, etc.) Name and photo of the room where the unit is installed The location name, and the name and photo of the room where the unit is installed can be changed later.

Network connection with the MusicCast CONTROLLER app is now complete, and the unit has been registered as a MusicCast-enabled device.

HINT If a different MusicCast-enabled device is already registered with the MusicCast CONTROLLER app, tap

(Setup) in the room selection screen, and then select Add New Device to add the unit to the app.

Tap

NETWORKS Connecting to a network En 29

SETUP

RETURN

/ ENTER

Using connection methods other than the MusicCast CONTROLLER app (wireless network) Use the setup menu on the unit to connect to a wireless network without using the MusicCast CONTROLLER app. Sharing the iOS device setting (p. 30) Using the WPS push button configuration (p. 31) Searching for a wireless router (access point) (p. 32) Setting up the wireless connection manually (p. 34) Using the WPS PIN code (p. 36)

NOTE Once the unit has been connected to a wireless network using any of the methods

described above, network settings will change when connection to a wireless network is established with the MusicCast CONTROLLER app.

AirPlay is the only network function that can be used without the MusicCast CONTROLLER app.

Sharing the iOS device setting You can easily setup a wireless connection by applying the connection settings on iOS devices (such as an iPhone). Before proceeding, confirm that your iOS device is connected to a wireless router (access point).

NOTE You need iOS device with iOS 7 or later. The connection settings on iOS devices cannot be applied to the unit to establish

a wireless connection if your wireless router (access point) uses WEP encryption. See Searching for a wireless router (access point) (p. 32) to establish a connection.

1 Press the z key to turn on this unit.

2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack; p. 16).

3 Press the SETUP key. The setup menu is displayed on the TV screen.

4 Use the / keys to select Network, and press the ENTER key.

5 Use the / keys to select Network Connection, and press the ENTER key.

6 Use the / keys to select Wireless (Wi-Fi), and press the ENTER key.

7 Use the / keys to select Share Wi-Fi Settings, and press the ENTER key.

8 When the following screen is displayed, press the ENTER key.

HINT The settings to be deleted (initialized) will be displayed. If you do not want to

delete these settings, press the RETURN key to terminate the connection.

NETWORKS Connecting to a network En 30

SETUP

/ ENTER

9 When the following screen is displayed, press the ENTER key.

10 Display the Wi-Fi setup screen on the iOS device and select the unit from SETUP A NEW AIRPLAY SPEAKER.... Follow the on-screen instructions displayed on the iOS device.

Using the WPS push button configuration A wireless connection can be established by pressing WPS button on the wireless router (access point).

1 Press the z key to turn on this unit.

2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack; p. 16).

3 Press the SETUP key. The setup menu is displayed on the TV screen.

4 Use the / keys to select Network, and then press the ENTER key.

5 Use the / keys to select Network Connection, and then press the ENTER key.

6 Use the / keys to select Wireless (Wi-Fi), and then press the ENTER key.

7 Use the / keys to select WPS Button, and then press the ENTER key.

NETWORKS Connecting to a network En 31

SETUP

/ ENTER

8 Push the WPS button on the wireless router (access point). When a connection has been established, Completed will be displayed on the TV screen. If Not connected is displayed, press the ENTER key to repeat the procedure beginning with step 6, or see the information below to try another connection method.

NOTE The WPS button cannot be used to establish a wireless connection if your

wireless router (access point) uses WEP encryption, or if the routers MAC address filter is enabled. See Searching for a wireless router (access point) (p. 32) to establish a connection.

The WPS button cannot be used to establish a wireless connection if your wireless router (access point) is configured so that it does not broadcast its SSID. See Setting up the wireless connection manually (p. 34) to establish a connection.

9 Press the SETUP key to exit the setup menu.

Searching for a wireless router (access point) Find and connect to a nearby wireless router (access point).

1 Press the z key to turn on this unit.

2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack; p. 16).

3 Press the SETUP key. The setup menu is displayed on the TV screen.

4 Use the / keys to select Network, and then press the ENTER key.

5 Use the / keys to select Network Connection, and then press the ENTER key.

6 Use the / keys to select Wireless (Wi-Fi), and then press the ENTER key.

7 Use the / keys to select Access Point Scan, and then press the ENTER key.

The list of available access points appears on the TV screen.

About WPS WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network.

NETWORKS Connecting to a network En 32

SETUP

/// ENTER

8 Use the / keys to select the desired access point and press the ENTER key. The wireless connection setting screen appears on the TV.

9 Press the ENTER key.

10 Use the / / / and ENTER keys to enter the security key.

Once the security key been entered, select OK, and then press the ENTER key. The screen will return to that displayed in step 8.

11 Use the / keys to select Connect and press the ENTER key to start the connection process. When a connection has been established, Completed will be displayed on the TV screen. If Not connected is displayed, press the ENTER key to repeat the procedure beginning with step 6, or see the information below to try another connection method.

NOTE Access Point Scan cannot be used to establish a wireless connection if

your wireless router (access point) is configured so that it does not broadcast its SSID. See Setting up the wireless connection manually (p. 34) to establish a connection.

12 Press the SETUP key to exit the setup menu.

[ ]/[ ]: Move the cursor left and right. [Space]: Enter a space. [BKSP]: Delete the character to the left of the selected one. [DELETE]: Delete the selected character. [CLEAR]: Delete all characters entered. [CANCEL]: Cancel character entry, and return to the previous screen.

NETWORKS Connecting to a network En 33

SETUP

RETURN

/// ENTER

Setting up the wireless connection manually Setup the SSID (network name), encryption method and security key for your network manually.

1 Press the z key to turn on this unit.

2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack; p. 16).

3 Press the SETUP key. The setup menu is displayed on the TV screen.

4 Use the / keys to select Network, and then press the ENTER key.

5 Use the / keys to select Network Connection, and then press the ENTER key.

6 Use the / keys to select Wireless (Wi-Fi), and then press the ENTER key.

7 Use the / keys to select Manual Setting, and then press the ENTER key.

8 Use the / keys to select SSID.

9 Use the / / / keys and the ENTER key to enter the SSID of the access point.

Once the security key been entered, select OK, and then press the ENTER key. The screen will return to that displayed in step 8.

[ ]/[ ]: Move the cursor left and right. [Space]: Enter a space. [BKSP]: Delete the character to the left of the selected one. [DELETE]: Delete the selected character. [CLEAR]: Delete all characters entered. [CANCEL]: Cancel character entry, and return to the previous screen.

NETWORKS Connecting to a network En 34

SETUP

/// ENTER

10 Use the / keys to select Security and the / keys to select the encryption method. Settings None, WEP, WPA2-PSK (AES), Mixed Mode

NOTE As communications are not encrypted when None is selected, selecting

this option poses the risk that third parties may access the unit without your permission.

11 Use the / keys to select Security Key and press the ENTER key.

HINT If you select None in step 10, this item is not available.

12 Use the / / / and ENTER keys to enter the security key. If you select WEP in step 10, enter either 5 or 13 character string, or 10 or 26 hexadecimal (base 16) keys. If you select the method other than WEP, enter either 8 to 63 character string, or 64 hexadecimal (base 16) keys.

HINT Hexadecimal (base 16) keys use combinations of the numbers 0 through 9

and the letters a through f. Letters are not case sensitive.

Once the security key been entered, select OK, and then press the ENTER key. The screen will return to that displayed in step 8.

13 Use the / keys to select Connect and press the ENTER key to start the connection process. When a connection has been established, Completed will be displayed on the TV screen. If Not connected is displayed, press the ENTER key to repeat the procedure beginning with step 6.

14 Press the SETUP key to exit the setup menu.

[ ]/[ ]: Move the cursor left and right. [Space]: Enter a space. [BKSP]: Delete the character to the left of the selected one. [DELETE]: Delete the selected character. [CLEAR]: Delete all characters entered. [CANCEL]: Cancel character entry, and return to the previous screen.

NETWORKS Connecting to a network En 35

SETUP

/ ENTER

Using the WPS PIN code Register the units PIN code with your wireless router (access point) to establish a connection. This procedure applies if your wireless router (access point) supports the WPS PIN feature.

1 Press the z key to turn on this unit.

2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack; p. 16).

3 Press the SETUP key. The setup menu is displayed on the TV screen.

4 Use the / keys to select Network, and then press the ENTER key.

5 Use the / keys to select Network Connection, and then press the ENTER key.

6 Use the / keys to select Wireless (Wi-Fi), and then press the ENTER key.

7 Use the / keys to select PIN Code, and then press the ENTER key.

The list of available access points appears on the TV screen.

8 Use the / keys to select the desired access point and press the ENTER key. The PIN code of the unit appears on the TV screen.

9 Enter the units PIN code into the wireless router (access point). For details on settings, refer to documentation supplied with the wireless router (access point).

10 Press the ENTER key to start the connection process. When a connection has been established, Completed will be displayed on the TV screen. If Not connected is displayed, press the ENTER key to repeat the procedure beginning with step 6, or see the information below to try another connection method.

NOTE The PIN code cannot be used to establish a wireless connection if your

wireless router (access point) uses WEP encryption, or if the routers MAC address filter is enabled. See Searching for a wireless router (access point) (p. 32) to establish a connection.

11 Press the SETUP key to exit the setup menu.

NETWORKS Connecting to a network En 36

SETUP

/// ENTER

Connecting a mobile device to the unit directly (Wireless Direct) Connect a mobile device directly to the unit without using a wireless router (access point). Wireless Direct supports the following. Operation of the unit using a mobile device to which the dedicated

MusicCast CONTROLLER app has been installed. Use of AirPlay to play music files stored on an iOS device.

NOTE You cannot use Wireless Direct simultaneously with the wired network connection

(p. 26) or the wireless network connection (p. 27). When Wireless Direct is enabled, the mobile device and the unit cannot connect

to the Internet. Therefore, you cannot use any kind of Internet service such as Internet radio.

1 Press the z key to turn on this unit.

2 Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack; p. 16).

3 Press the SETUP key. The setup menu is displayed on the TV screen.

4 Use the / keys to select Network, and then press the ENTER key.

5 Use the / keys to select Network Connection, and then press the ENTER key.

6 Use the / keys to select Wireless Direct, and then press the ENTER key.

7 Use the / keys to select Security and the / keys to select the encryption method. Settings None, WPA2-PSK (AES)

In most cases, WPA2-PSK (AES) should be selected. If your mobile device does not support WPA2-PSK (AES), select None.

NOTE As communications are not encrypted when None is selected, selecting

this option poses the risk that third parties may access the unit without your permission.

8 Use the / keys to select Security Key and press the ENTER key.

HINT If you select None in step 7, this item is not available.

Mobile device

NETWORKS Connecting to a network En 37

SETUP

/// ENTER

9 Use the / / / and ENTER keys to enter the security key. Enter either 8 to 63 character string, or 64 hexadecimal (base 16) keys.

HINT Hexadecimal (base 16) keys use combinations of the numbers 0 through 9

and the letters a through f. Letters are not case sensitive.

Once the security key been entered, select OK, and then press the ENTER key. The screen below will be displayed.

HINT Before proceeding to the next step, record the following information. These

information will be needed to configure the Wi-Fi setting of a mobile device. SSID displayed on the TV screen Security key you have just entered

10 Use the / keys to select Save and press the ENTER key to save the setting. This completes the settings and Set the mobile device. will be displayed on the TV screen. The unit functions as an access point. Next, configure the Wi-Fi settings of a mobile device.

11 Configure the Wi-Fi settings of a mobile device. For details on settings of your mobile device, refer to documentation supplied with the mobile device. 1 Enable the Wi-Fi function on the mobile device. 2 Select the SSID displayed in step 9 from the list of available

access points. 3 When you are prompted for a password, enter the security

key displayed in step 9.

12 Press the SETUP key to exit the setup menu.

[ ]/[ ]: Moves the cursor left and right. [Space]: Enter a space. [BKSP]: Delete the character to the left of the selected one. [DELETE]: Delete the selected character. [CLEAR]: Delete all characters entered. [CANCEL]: Cancel character entry, and return to the previous screen.

NETWORKS Connecting to a network En 38

You can play back music files stored on your PC or DLNA-compatible NAS via the unit.

NOTE The audio may be interrupted while using the wireless network connection. In this case, use the wired

network connection.

Supported File formats

* Linear PCM format only

NOTE To play back FLAC files stored on a PC or NAS, you need to install server software that supports sharing of

FLAC files via DLNA on your PC or use a NAS that supports FLAC files. Digital Rights Management (DRM) contents cannot be played back.

Media sharing setup To play back music files stored on your PC or DLNA-compatible NAS, first you need to configure the media sharing setting on each music server.

For a PC with Windows Media Player installed This unit supports Windows Media Player 11 or later. This section explains Windows Media Player 12 setup as an example.

NOTE Operation may vary depending upon your PC or settings. Refer to documentation provided by your PCs

manufacturer or Windows Media Player Help for details.

1 Start Windows Media Player 12 on your PC.

2 Select Stream, then Turn on media streaming.

3 Click Turn on media streaming.

4 Select Allowed from the drop-down list next to the units model name.

5 Click OK to exit.

For a PC or a NAS with other DLNA server software installed Refer to documentation supplied with the device or software and configure the media sharing settings.

Playing music files Use the MusicCast CONTROLLER app (p. 27) installed on your mobile device to play music files.

NOTE Register the unit as a MusicCast-enabled device (p. 27) before playing music files.

1 Use the MusicCast CONTROLLER app to select the units room (Room1, etc.).

2 Tap (Server).

3 Follow the on-screen instructions to select a song.

HINT When a music file is registered with No. 1, 2, or 3 in Favorites with the MusicCast CONTROLLER app, the

registered music file can be played with the NET RADIO 1, 2, or 3 key on the remote control.

Playing back music stored on media servers (PCs/ NAS)

File Sampling frequency (kHz) The number of channels Gapless playback

WAV* 32 to 192 2

MP3 8 to 48 2

WMA 8 to 48 2

MPEG-4 AAC 8 to 48 2

FLAC 32 to 192 2

ALAC 32 to 96 2

AIFF 32 to 192 2

NETWORKS Playing back music stored on media servers (PCs/NAS) En 39

You can listen to Internet radio stations from all over the world.

NOTE You may not be able to receive some Internet radio stations. The unit uses the vTuner Internet radio station database service. This service may be discontinued without

notice.

Playback of Internet radio Use the MusicCast CONTROLLER app (p. 27) installed on your mobile device to select an Internet radio station.

NOTE Register the unit as a MusicCast-enabled device (p. 27) before listening to Internet radio.

1 Use the MusicCast CONTROLLER app to select the units room (Room1, etc.).

2 Tap (Net Radio).

3 Select a station from Locations, Genres, etc.

HINT When an Internet radio station is registered with No. 1, 2, or 3 in Favorites with the MusicCast

CONTROLLER app, the registered Internet radio station can be played with the NET RADIO 1, 2, or 3 key on the remote control.

Using the MusicCast CONTROLLER app to bookmark a station

1 Select the desired Internet radio station.

2 Tap in the playback screen, and then tap Add Bookmark.

HINT You can use the Web browser on your PC to access the vTuner website (http://yradio.vtuner.com/)

and edit bookmarks. When the vTuner website is accessed, a dialog in which the units vTuner ID can be entered is

displayed. Confirm the units vTuner ID from Network of Information in the setup menu beforehand (p. 47)

Tuning into registered Internet radio stations

1 Tap Bookmarks, and then tap My_Favorites to select the desired Internet radio station.

Listening to Internet radio

Tap

NETWORKS Listening to Internet radio En 40

The AirPlay function allows you to play back iTunes or iPod music on the unit via network.

HINT This section describes iPod touch, iPhone and iPad as the iPod. iPod refers to iPod touch,

iPhone and iPad, unless otherwise specified.

NOTE AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or

later, and Mac and PC with iTunes 10.2.2 or later.

HINT When the unit is turned on for the first time after purchase, the indicator flashes slowly and the Share

Wi-Fi Settings screen is displayed on the TV. While the indicator is flashing and the screen is displayed, network settings from your iOS device (an iPhone, etc.) can be applied to the unit to connect the unit to a wireless network. The indicator does not flash and the screen is not displayed if the units NETWORK jack is connected to a router using a cable (wired connection).

Display Wi-Fi settings on the iOS device and select the unit from SETUP A NEW AIRPLAY SPEAKER....

When the following screen is displayed, select the network (access point) to which the unit will be connected.

NOTE If the unit is connected to a network using the MusicCast CONTROLLER app (p. 27), network settings will

be changed to those of the MusicCast CONTROLLER app.

Playing back music with AirPlay

PC

iTunes

Router

iPod

(wired or wireless)

(wired or wireless)

Name of the unit

Example

Name of the unit

Example Tap to connect to the selected network

Name of the selected network

NETWORKS Playing back music with AirPlay En 41

Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit.

1 Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears.

NOTE If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.

2 On the iTunes/iPod, click (tap) the AirPlay icon and select the unit as the audio output device.

3 Select a song and start playback. To operate playback, use the Music app on the iPod or iTunes on the PC.

HINT When the network standby function (p. 49) is enabled, the unit automatically turns on when iTunes/

iPod playback begins. You can adjust the units volume from the iTunes/iPod during playback.

Use this function to play music stored on your mobile device over a network.

Using a mobile device to play songs Use the MusicCast CONTROLLER app (p. 27) installed on your mobile device to operate playback.

NOTE Register the unit as a MusicCast-enabled device (p. 27) before playing music files.

1 Use the MusicCast CONTROLLER app to select the units room (Room1, etc.).

2 Tap .

3 Select a song from Playlists, Artists, etc.

Caution When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback on the iTunes/iPod immediately.

iTunes (example) iPod (example)

YAS-706

YAS-706

iPod touch

iTunes (example) iPod (example)

The unit

Playing back music stored on mobile devices

Caution When you use mobile device controls to adjust volume, the volume may be unexpectedly loud. This could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback on the mobile device immediately.

Router

Mobile device

(wired or wireless)

NETWORKS Playing back music stored on mobile devices En 42

SETTINGS

SETUP

RETURN

/// ENTER

Settings

A variety of settings for this unit can be specified and adjusted from the setup menu. Among the options available are the sound beam output method for optimal surround sound effects, channel volume control, and HDMI settings. The setup menu is displayed on, and operated from, the TV screen. See Displaying the menu screen on the TV (p. 16) for instructions on displaying the setup menu on the TV.

Setting the setup menu

1 Press the SETUP key.

NOTE Hold down the SETUP key to display OSD Language directly on the

screen (p. 17, 49). If an update for the units firmware is available, an envelope icon ( ) will be

displayed in the setup menu (p. 52).

2 Press the / key to select a menu and then press the ENTER key or key. Repeat these steps to display the desired menu.

Press the key or RETURN key to return to the previous menu.

3 Press the / key to change the setting value of each menu.

4 Press the SETUP key again to exit the setup menu.

Setup menu

SETTINGS Setup menu En 43

Setup menu list

Menu Settings Function Page

Sound

Dynamic Range Specify dynamic range. 45

Audio Delay Specify audio output timing. 45

Audio Delay (LINK) Audio Sync, Lip Sync Specify audio output timing when distributing sound from the unit to other MusicCast-enabled devices.

45

Subwoofer Bass Out

Specify whether the subwoofer will be connected via a wired or wireless connection.

45

Pairing Manually pair the center unit with the subwoofer. 45

HDMI HDMI Control Turn HDMI control on or off. 46

HDMI Audio Out Choose whether HDMI audio input is played via this unit or the TV. 46

Bluetooth

Bluetooth Enable/disable the Bluetooth functions. 46

Transmission Turn the function that transmits audio to a Bluetooth device, such as Bluetooth speakers, on or off.

46

Device Search Search for the Bluetooth device, such as Bluetooth speakers, to which audio will be transmitted.

46

MAC Address Display the MAC address for the Bluetooth connection. 46

Network

Information Display the units network information. 47

Network Connection Select the network connection method. 47

IP Address DHCP, IP Address, Subnet Mask, Default Gateway, DNS Server (P), DNS Server (S)

Configure the network parameters (such as IP address). 48

MAC Address Filter Filter, MAC Address 110 Set the MAC address filter to limit access to the unit from other network devices.

48

Network Standby Enable/disable the function that turns on the unit from other network devices. 49

Network Update Perform Update Update the firmware via the network. 49

Function

Dimmer Adjust the brightness of the indicators. 49

OSD Language Changes the language used for menus displayed on the TV screen. 49

Auto Power Standby Enable/disable the function that turns off the unit automatically. 50

Information

Audio Display audio input signal information. 50

Video Display video input signal information. 50

System Display this units firmware version. 50

SETTINGS Setup menu En 44

Sound

Dynamic Range

Adjust this units dynamic range (difference between maximum and minimum volumes).

Settings

Audio Delay

TV images sometimes lag behind the sound. You can use this function to delay the sound output to synchronize it with the video image.

NOTE Audio Delay is not available when all of the following conditions are met.

Audio Delay (LINK) (p. 45) is set to Audio Sync. Sound (an input source other than BLUETOOTH or NET) is distributed from this unit to other MusicCast-

enabled devices. Link Control is set to Standard (default) or Speed Boost with the MusicCast CONTROLLER app.

Adjustable range

* When Auto is selected, output timing is automatically adjusted. This setting is only available when the TV connected via HDMI cable supports the audio delay automatic adjustment feature.

Audio Delay (LINK)

Specify whether or not the units sound output timing is synchronized with other MusicCast-enabled devices when sound is distributed from this unit to other MusicCast- enabled devices.

NOTE This setting can only be configured when Link Control is set to Standard (default) or Speed Boost with

the MusicCast CONTROLLER app.

Settings

Subwoofer

Apply subwoofer settings, such as the connection method.

Bass Out Specify how the subwoofer is connected.

Settings

Pairing Manually pair the center unit with the subwoofer. After Pairing is selected, press the SUBWOOFER PAIRING button on the subwoofer for three seconds. For details, refer to Pairing the center unit and subwoofer (p. 62).

HINT Pairing can be selected when Bass Out is set to Wireless.

Setup Menu Sound Dynamic Range

Min/Auto

Min: Sets dynamic range at a level that supports comfortable listening at low volumes. Auto: Sets dynamic range in accordance with information received from input signal.

Standard The dynamic range recommended for regular home use.

Max (default) Outputs sound without adjusting the dynamic range of the input signals.

Setup Menu Sound Audio Delay

HDMI1, 2, TV, COAXIAL, ANALOG

Auto* (default), 0 ms to 500 ms, 5 ms increments

Setup Menu Sound Audio Delay (LINK)

Audio Sync (default)

Output timing is synchronized with other MusicCast-enabled devices (to which sound from this unit is distributed).

Lip Sync Output timing is adjusted in accordance with the Audio Delay setting (p. 45). Select this option if you notice a deviation in timing between audio and video playing on a TV or BD/DVD player.

Setup Menu Sound Subwoofer

Wireless (default)

Select to connect the center unit and subwoofer wirelessly.

Wired Select to connect the center unit and subwoofer via the subwoofer cable (RCA mono cable) and system control cable (3.5 mm monaural mini plug cable).

SETTINGS Setup menu En 45

HDMI Use to configure the settings related to HDMI signals and the HDMI control function.

HDMI Control

Turn HDMI control function (p. 22) on or off.

Settings

HINT Set the HDMI control function to On when a TV that supports audio return channel (ARC) is used (p. 12),

or when using the HDMI signal pass-through function (p. 13).

HDMI Audio Out This setting can be configured only when HDMI Control is set to Off.

Use to select a device to play HDMI audio input signal.

Settings

HINT When HDMI Control is set to On, select the audio output device based on the settings configured for the

TV connected to this unit. HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT

(ARC) jack of this unit.

Bluetooth Configures the Bluetooth settings.

Bluetooth

Enables/disables the Bluetooth function.

Settings

Transmission

Transmit audio from the unit to Bluetooth speakers or headphones.

Settings

Device Search

Select the Bluetooth speakers or headphones to which audio will be transmitted, and connect the unit to the speakers or headphones wirelessly.

MAC Address

Display the MAC address for the Bluetooth connection.

Setup Menu HDMI HDMI Control

Off Disable the control function. The standby power consumption of this unit decreases.

On (default) Enable the control function.

Setup Menu HDMI HDMI Audio Out

AMP (default) Play HDMI audio input signal from the unit.

TV Play HDMI audio input signal from the TV connected to the HDMI OUT (ARC) jack on the unit. The unit cannot be used to adjust volume.

Setup Menu Bluetooth Bluetooth

Off Disable the Bluetooth function.

On (default) Enable the Bluetooth function.

Setup Menu Bluetooth Transmission

Off (default) Audio can not be transmitted.

On Audio input to the unit can be transmitted to Bluetooth speakers or headphones.

Setup Menu Bluetooth Device Search

Setup Menu Bluetooth MAC Address

SETTINGS Setup menu En 46

Network Configures the network settings.

Information

Display the network information on the unit.

HINT The options displayed vary according to the type of network connection (Wired/Wireless (Wi-Fi)/Wireless

Direct).

Network Connection

Select the network connection method.

Settings Setup Menu Network Information

Status The connection status of the NETWORK jack

Connection Connection method

MC Network The connection status of MusicCast Network

SSID The access point to which the unit is connected

Security The encryption method for your network

MAC Address MAC address (Ethernet/Wi-Fi)

IP Address IP address

Subnet Mask Subnet mask

Default Gateway The IP address of the default gateway

DNS Server (P) The IP address of the primary DNS server

DNS Server (S) The IP address of the secondary DNS server

vTuner ID The ID of the Internet radio (vTuner)

Setup Menu Network Network Connection

Wired Select this option when connecting the unit to a network with a network cable (not supplied).

Wireless (Wi-Fi) Select this option when connecting the unit to a network via the wireless router (access point).

Wireless Direct Select this option when connecting a mobile device to the unit directly.

SETTINGS Setup menu En 47

IP Address

Configure the network parameters (such as IP address).

DHCP Select whether to use a DHCP server.

Settings

Manual network settings

1 Set DHCP to Off.

2 Use the / keys to select a parameter type.

3 Use the / keys to move the edit position and the / keys to select a value.

4 Press the ENTER key.

MAC Address Filter

The MAC address filter limits network devices that can be used to operate the unit. When operating the unit via an app on a mobile device, specify the MAC address of the device.

HINT Operation of the AirPlay function (p. 41) or DLNA-compatible device (p. 39) is not limited by this setting.

Filter Enable/disable the MAC address filter.

Settings

MAC Address 110 Specify the MAC addresses (up to 10) of the network devices that will operate the unit when Filter is set to On.

1 Use the / keys to select an MAC address number (1 to 10).

2 Use the / keys to move the edit position and the / keys to select a value.

3 Press the ENTER key.

Setup Menu Network IP Address

Off The DHCP server is not used. Configure the network parameters manually. For details, see Manual network settings.

On (default) The DHCP server is used to automatically obtain the units network parameters (such as IP address).

IP Address Specify an IP address.

Subnet Mask Specify a subnet mask.

Default Gateway Specify the IP address of the default gateway.

DNS Server (P) Specify the IP address of the primary DNS server.

DNS Server (S) Specify the IP address of the secondary DNS server.

Setup Menu Network MAC Address Filter

Off (default) Disable the MAC address filter.

On Enable the MAC address filter. In MAC Address 110, specify the MAC addresses of the network devices that will operate the unit.

SETTINGS Setup menu En 48

Network Standby

Turn the function that controls the units power (Network Standby) when a mobile device or Bluetooth device is operated on or off.

Settings

HINT The unit consumes more power when it is off with the network standby function enabled than it does when

it is off with this function disabled.

Network Update

Update the firmware via the network.

Perform Update This option is available after a new firmware has been released. For details, see Updating the units firmware (p. 52).

Function

Dimmer

Adjust the brightness of the indicators. The smaller the value, the dimmer the indicators.

Settings -2 (off), -1 (dim; default), 0 (bright)

HINT Indicators glow brightly just after operation and change to the specified brightness after a few seconds.

OSD Language

Use to select the language used for menus displayed on the TV screen.

Settings

HINT Hold down the SETUP key to display OSD Language directly on the TV screen.

The settings may be changed automatically when using the TV which supports the HDMI control function.

Setup Menu Network Network Standby

Off Disable the network standby function.

On (default) Enable the network standby function.

When the unit is turned off, it will turn on with the following playback operations. Play back with AirPlay Music files stored on a DLNA-compliant network

attached storage (NAS) unit are played The unit can also be turned on and off using the

MusicCast CONTROLLER app installed on your mobile device.

When a Bluetooth device is connected to this unit while it is off, this unit turns on.

Setup Menu Network Network Update

Setup Menu Function Dimmer

Setup Menu Function OSD Language

ENGLISH (default)

Menus are displayed in English.

FRANAIS Menus are displayed in French.

ESPAOL Menus are displayed in Spanish.

SETTINGS Setup menu En 49

Auto Power Standby

Enabling the auto power standby function prevents the unit from remaining on when not in use.

Settings

Information Display information for the audio and video signal input to this unit.

Audio

The following information on the current audio input signal is displayed.

HINT The audio bit rate may not be displayed for some input signals.

Video

The following information on the current video input signal is displayed.

System

Display the version of firmware currently installed on this unit.

Setup Menu Function Auto Power Standby

Off (default) Disable the auto power standby function.

On Enable the auto power standby function.

The unit automatically turns off in any of the following situations. No operations for 8 hours No audio input and no operations for 20

minutes when HDMI 1-2, BLUETOOTH or NET is selected as the input source.

The auto power standby function can also be configured without using the setup menu. Follow the procedure below.

1 Turn off the unit.

2 Hold down the key and press the key on the unit.

The auto power standby function is enabled or disabled, and the unit turns on. For several seconds immediately after the unit is turned on, the indicator shows auto power standby function status.

CONNECT

Off (enabled), glows (disabled)

Setup Menu Information Audio

Format Digital audio format

Number of channels

The number of channels contained within the input signalfront/ surround/low field effects (LFE). Example: 3/2/0.1 means signal contains 3 front channels, 2 surround channels, and LFE. If the signal contains channels other than front, surround, and LFE, the total number of channels may be displayed. Example: 5.1ch

Sampling frequency The sampling frequency of the digital input signal

Bit rate The per-second bit rate of the input signal

Setup Menu Information Video

Type HDMI or DVI

Resolution Video signal resolution

Setup Menu Information System

SETTINGS Setup menu En 50

When playing 4K video, select Mode 1 or Mode 2 according to the video signal format.

* When Mode 1 is selected, use a high-speed HDMI cable that supports bandwidth of 18 Gbps.

1 Turn off the unit.

2 Hold down the CONNECT key and press the key on the unit.

The selected 4K video mode (Mode 1 or Mode 2) is enabled, and the unit turns on. The indicator shows that Mode 1 or Mode 2 has been enabled for several seconds immediately after the unit turns on.

Configuring 4K video mode

Mode 1*

4K (60 Hz/50 Hz) signals are input and output in 4:4:4, 4:2:2, or 4:2:0 format. Depending upon the device connected or the HDMI cable used, video may not be displayed correctly. Should this occur, select Mode 2.

Mode 2 (default)

4K (60 Hz/50 Hz) signals are input and output in 4:2:0 format.

CONNECT

Off (Mode 1), glows (Mode 2)

SETTINGS Configuring 4K video mode En 51

SETUP

RETURN

/ ENTER

New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it.

The units firmware can be updated as follows. Update firmware from Network Update in the setup menu. To

perform the procedure, your TV must be connected to the unit via HDMI.

Update firmware using the dedicated MusicCast CONTROLLER app installed on a mobile device. Follow MusicCast CONTROLLER guides to operate the app and update the firmware.

Using Network Update in the setup menu to update firmware When the unit is turned on for the first time after a new version of the units firmware has been released, a message indicating that a firmware update is available will be displayed on the TV screen.

HINT To update the firmware later, press the RETURN key when the Network Update

screen is displayed on the TV screen.

1 Press the SETUP key.

2 Use the / keys to select Network, and then press the ENTER key.

3 Use the / keys to select Network Update, and then press the ENTER key.

4 Press the ENTER key. The TV screen goes black and firmware update begins. Update progress can be confirmed using the indicators on the unit.

If the update is completed successfully, all indicators on the unit will flash.

5 Press the key on the unit.

The firmware update is complete.

NOTE If the firmware update fails, the indicator at far right on the unit will flash blue.

Press the key to turn unit off and then on again, and repeat the procedure from step 1 again. If the update fails again, check the network connection.

Updating the units firmware

Cautions Do not operate the unit or disconnect the power cable or network cable during

firmware update. If the Internet connection speed is slow, or the unit is connected to the wireless

network, network update may not be possible depending on the condition of the network connection. Should this occur, try again at a later time.

For details on update, visit the Yamaha website.

Network Update

New rmware available.

You can start the update from

the Setup Menu .

It takes about 20 min. to

update rmware.

[SETUP] : Setup Menu

[RETURN] : Cancel

Update progress

CONNECT

SETTINGS Updating the units firmware En 52

Updating firmware with connection of a USB flash drive Download the latest firmware version from the Yamaha website to a USB flash drive, which can then be used to update the units firmware. See information provided when updating firmware for details.

1 Save this units firmware to a USB flash drive.

2 Turn off the unit.

3 Connect the USB flash drive to the UPDATE ONLY jack on the units rear panel.

4 Hold down the key and press the key.

The firmware update begin. Update progress can be confirmed using the indicators on the unit.

If the update is completed successfully, all indicators on the unit will flash.

5 Press the key on the unit.

The firmware update is complete.

NOTE If the firmware update fails, the indicator at far right on the unit will flash blue. Press the key to turn unit

off and then on again, and repeat the procedure from step 1 again. If the firmware update fails again, confirm the USB flash drive is correctly connected to the UPDATE ONLY jack.

Follow the procedure below to initialize the unit.

1 Turn off the unit.

2 Hold down the key and press the key on the unit until all indicators flash.

CONNECT

Update progress

CONNECT

Initializing the unit

CONNECT

Initialized

SETTINGS Initializing the unit En 53

APPENDIX

Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following:

1 The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. 2 The unit, TV and playback devices (such as BD/DVD players) are turned on. 3 The connectors of each cable are securely inserted into jacks on each device.

Power and system

Problem Cause Remedy

The power turns off suddenly. When the auto power standby function is enabled, the unit automatically turns off in any of the following situations: - No operations have been performed for 8 hours - HDMI 12, BLUETOOTH, or NET is selected as the input source, but

no audio has been input to the unit or no operations have been performed with the unit for more than 20 minutes.

Turn on the unit again. If the auto power standby function is not used, disable the function (p. 50).

The protection circuitry has been activated. (The STATUS indicator on the center unit flashes.)

After confirming that all connections are made properly, turn on the unit again. If the power still turns off frequently, unplug the power cable from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center.

The power cannot be turned on. The protection circuitry has been activated three times consecutively. (If you try to turn on the power in this condition, the STATUS indicator on the center unit will flash.)

To protect the product, the power cannot be turned on. Unplug the power cable from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center.

All indicators go out although the unit is turned on (it may seem that the unit is turned off).

The unit is configured so that indicators do not glow or flash unless the unit is being operated.

Select the desired brightness from Dimmer in the setup menu (p. 49).

The unit does not function correctly. The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage.

Hold down the key on the unit for more than 10 seconds to turn on the unit. (If the problem persists, unplug the power cable from the AC wall outlet and plug it again.)

The unit turns on by itself. Another Bluetooth device is being operated nearby. Terminate Bluetooth connection with the unit (p. 24).

The TVs 3D glasses do not work. The unit is blocking the TVs 3D glasses transmitter. Confirm the position of the TVs 3D glasses transmitter, and position the unit so that it does not obstruct the transmitter.

APPENDIX Troubleshooting En 54

Audio

Problem Cause Remedy

No sound. Another input source is selected. Select an appropriate input source (p. 18).

The mute function is activated. Cancel the mute function (p. 20).

The volume is too low. Turn up the volume (p. 20).

The power cable of the unit is not connected properly. Make sure that the power cable of the unit is connected to an AC wall outlet securely (p. 12).

Input jacks on a playback device are connected. Connect the input jack on the unit and the output jack on the playback device.

Signals that the unit cannot play back are being input. Change the digital audio output setting on the playback device to PCM, Dolby Digital or DTS Digital Surround.

HDMI Audio Out is set to TV. Set to AMP (p. 46).

HDMI Control is set to Off. When connecting ARC (Audio Return Channel) supported TV and this unit using an HDMI cable only, set HDMI Control to On (p. 46).

To use this unit with HDMI Control set to Off, connect the TVs audio output jack to this units TV (optical digital) input jack via the optical digital audio cable (p. 12).

Sound from an HDMI control-enabled TV is set for output from the TVs built-in speakers.

Use the TVs HDMI settings to set audio output to any option other than the TVs built-in speakers.

No sound is coming from the subwoofer. Refer to the No sound is coming from the subwoofer. and The volume of the subwoofer is low. problems (p. 56).

The volume decreases when the unit is turned on.

The automatic volume adjustment function is activated. To prevent excessive loudness, the unit automatically controls its volume within a certain level when the unit is turned on.

Turn up the volume as required (p. 20).

No surround effect. Stereo playback is selected. Select surround playback (p. 19).

The volume is too low. Turn up the volume (p. 20).

The TV or playback device is set to output 2 channel audio (such as PCM) only.

Change the digital audio output setting on the TV or playback device to BitStream.

Sound is also heard from the TV built-in speakers. Set the TV volume to minimum (p. 12).

The listening position is too close to the unit. The listening position should be at some distance from the unit.

Noise is heard. The unit is too close to another digital or high-frequency device. Move those devices away from the unit.

APPENDIX Troubleshooting En 55

No sound is coming from the subwoofer.

Wired/Wireless The AC power supply cable of the subwoofer is not firmly connected to the AC wall outlet.

Connect the AC power supply cable firmly to the AC wall outlet.

Wired/Wireless The volume of the subwoofer is low. Increase the volume of the subwoofer with the SUBWOOFER + key on the remote control (p. 20).

Wired/Wireless The subwoofers built-in protective circuit was activated. (The STATUS indicator on the subwoofer glows orange.)

Disconnect the power cable, and contact your nearest Yamaha dealer or service center to request repair.

Wired Bass Out of Subwoofer is set to Wireless. Set it to Wired (p. 45).

Wired The system control cable (3.5 mm monaural mini plug cable) and subwoofer cable (RCA mono cable) are not connected firmly.

Connect the cables firmly.

Wireless Conditions for wireless communications are not good, and the center unit and the subwoofer are not connected. (The STATUS indicator on the subwoofer flashes green, or glows red.)

Move the subwoofer closer to the center unit. If the problem persists, move the subwoofer to a location where its STATUS indicator steadily glows green.

If there are obstacles such as metal furniture obstructing communications between the center unit and the subwoofer, rearrange the furniture or reposition the subwoofer.

If there are devices such as microwave ovens or wireless network devices that emit electromagnetic waves, move the center unit and the subwoofer away from these devices.

Use cables to connect the subwoofer to the center unit (p. 15).

Wireless The center unit is not paired with the subwoofer. (The STATUS indicator on the subwoofer flashes or grows red.)

Move the subwoofer closer to the center unit to improve conditions for wireless communications, and pair the two (p. 62). If the indicator on the subwoofer does not glow green steadily after pairing, the unit may be malfunctioning. Disconnect the power cable and contact your nearest Yamaha dealer or service center to request repairs.

Wireless Bass Out of Subwoofer is set to Wired. Set to Wireless (p. 45).

The volume of the subwoofer is low.

Wired/Wireless The volume of the subwoofer is low. Increase the volume of the subwoofer with the SUBWOOFER + key on the remote control (p. 20).

Wired/Wireless Content from an input source with a limited support for low tones is playing.

Play content from an input source with broader support for low tones to see if volume is still low.

Wired/Wireless Move or reposition the subwoofer (p. 9).

Wired/Wireless A subwoofer other than that supplied with this unit is connected. This unit supports the supplied subwoofer NS-WSW121 only.

Sound from the subwoofer is intermittent.

Wired Cables used to connect the subwoofer to the center unit are not connected firmly.

Connect the cables firmly (p. 15).

Wireless Wireless communication conditions are not good, and the center unit and the subwoofer are not connected steadily.

Move the subwoofer closer to the center unit. If the problem persists, move the subwoofer to a location where its STATUS indicator steadily glows green.

If there are obstacles such as metal furniture obstructing communication between the center unit and the subwoofer, rearrange the furniture and the subwoofer.

If there are devices such as microwave ovens or wireless network devices that emit electromagnetic waves, move the center unit and the subwoofer away from these devices.

Problem Cause Remedy

APPENDIX Troubleshooting En 56

Audio/Video

Remote control

Problem Cause Remedy

The image is not displayed on TV screen. The HDMI cable is not securely connected. Connect the HDMI cable properly (p. 12, 13).

Menu screen of this unit is not displayed. 4K mode is not properly configured. Select Mode 1 or Mode 2 in accordance with the 4K signal format (p. 51).

A digital or high-frequency equipment produces noises.

The input switch of TV is not set correctly. Set the TVs input source to this unit (p. 16).

The HDMI control function does not work properly.

The unit may be placed close to digital equipment or high-frequency equipment.

Move the equipment away from the unit.

HDMI Control is set to Off. Set HDMI Control to On (p. 46).

The HDMI control function is disabled on your TV. Refer to documentation supplied with your TV and check the setting.

The number of the connected HDMI devices exceeds the limit. Disconnect some of the HDMI devices.

Amplifiers (AV amplifiers, sound bars, etc.) other than the unit are connected to the TV or a playback device with an HDMI cable.

Connect only this unit to the TV or a playback device for use as an amplifier.

When the unit is turned off, video and/or audio from a playback device are not output to the TV.

HDMI Control is set to Off. Set HDMI Control to On (p. 46).

Audio delay control function is not effective even Audio Delay is set to Auto.

The TV does not support the audio delay auto adjustment feature. Adjust timing of sound output manually from Audio Delay in the setup menu (p. 45).

Problem Cause Remedy

The unit cannot be operated using the remote control.

The unit is out of the operating range. Use the remote control within the operating range (p. 3).

The batteries are weak. Replace with new batteries (p. 3).

The remote control sensor of the unit is exposed to direct sunlight or strong lighting.

Adjust the lighting angle, or reposition the unit.

The TV cannot be operated when the TVs remote control is pointed toward the units remote sensor.

The unit and TV are too far apart (or too close), preventing proper operation of the unit's TV remote repeater function.

Position the unit so that it is more than 5 cm (2 in) away from the TV (p. 10).

There are obstacles between the unit and the TV (cables, etc.), preventing proper operation of the unit's TV remote repeater function.

Remove obstacles between the unit and the TV.

The TVs remote control does not use infrared signals. The units TV remote repeater function cannot be used. Reposition the unit so that it does not obstruct the remote control sensor on the TV, and point the TVs remote control at the remote control sensor on the TV to control the TV.

Signals transmitted from the TVs remote control and the unit's TV remote repeater interfere with each other, making it difficult for the TV to receive signals.

APPENDIX Troubleshooting En 57

Bluetooth Receiving

Problem Cause Remedy

Unable to connect the unit to a Bluetooth device.

Bluetooth is set to Off. Set it to On (p. 46).

Bluetooth is not selected as the input source. Select Bluetooth as the input source (p. 24).

Another Bluetooth device is connected. Terminate the current Bluetooth connection, and connect to the device from which audio should be received (p. 24).

A Bluetooth adaptor, etc. that you want to connect to the unit has a password other than 0000.

Use a Bluetooth adaptor, etc. whose password is 0000 (p. 24).

The device does not support A2DP. Connect to a Bluetooth audio device that supports A2DP.

The unit and device are too far apart. Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit and connect the device to this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

No sound is heard or the sound is intermittent via the unit.

The device is not set to send Bluetooth audio signals to the unit. Check that the Bluetooth function of the device is set properly.

Playback on the device has not been performed. Perform playback on the device.

The devices volume is set to minimum. Turn up the volume level on the device.

The unit and device are too far apart. Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signal.

The Bluetooth connection of the unit with the device is disconnected. Perform Bluetooth connection operations again (p. 24).

APPENDIX Troubleshooting En 58

Transmitting

Problem Cause Remedy

Cannot make the unit connected to the Bluetooth device.

Bluetooth is set to Off. Set it to On (p. 46).

Transmission is set to Off. Set it to On (p. 46).

Another Bluetooth device is connected. Terminate the current Bluetooth connection, and connect to the device to which audio should be transmitted (p. 25).

The device does not support A2DP. Connect to a Bluetooth audio device that supports A2DP.

The unit and device are too far apart. Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit and connect the device to this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

No sound is heard or the sound is intermittent via the Bluetooth device.

The device is not set to receive Bluetooth audio signals from the unit. Check that the Bluetooth function of the device is set properly.

The devices volume is set to minimum. Turn up the volume level on the device.

The sound to be transmitted is not playing. Play sound on the device selected with the input key (p. 25).

The unit and device are too far apart. Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

The Bluetooth connection of the unit with the device is disconnected. Perform Bluetooth connection operations again (p. 25).

Attempted to establish a connection during playback with AirPlay. Playback with AirPlay cannot be transmitted. Terminate AirPlay playback and try again to establish a connection (p. 41).

APPENDIX Troubleshooting En 59

Network

Problem Cause Remedy

The network feature does not function. The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set DHCP in the setup menu to On on the unit (p. 48). If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network.

Not connected is displayed with Wireless (Wi-Fi) configuration; unable to connect to wireless router (access point).

The wireless routers MAC address filter is enabled. A connection cannot be established if the wireless routers MAC address filter is enabled. Check wireless router (access point) settings and try a different connection method (p. 48).

Not connected is displayed with Wireless (Wi-Fi) configuration using the WPS function (WPS Button and PIN Code) and Access Point Scan; unable to connect to wireless router (access point).

The wireless router (access point) does not broadcast its SSID. A connection cannot be established if the wireless router (access point) is configured so that it does not broadcast its SSID. Check wireless router (access point) settings and try a different connection method (p. 31, 36).

Not connected is displayed with Wireless (Wi-Fi) configuration using the WPS function (WPS Button and PIN Code); unable to connect to wireless router (access point).

The wireless router (access point) uses WEP encryption. A connection cannot be established using the WPS function. Try a different connection method (p. 31, 36).

Playback stops unexpectedly and files cannot be played continuously.

The folder contains some files that cannot be played via the unit. Delete or move files (including video or hidden files) that cannot be played via the unit from the folder.

The unit does not detect the PC. The media sharing setting is not correct. Configure the sharing setting and select the unit as a device to which music contents are shared (p. 39).

Some security software installed on your PC is blocking the access of the unit to your PC.

Check the settings of security software installed on your PC.

The unit and PC are not in the same network. Check the network connections of the unit and PC, and then connect the unit and the PC to the same network.

The MAC address filter is enabled on the unit. In MAC Address Filter in the setup menu, disable the MAC address filter or specify the MAC address of your PC to allow it to access to the unit (p. 48).

The files in the PC cannot be viewed or played back.

The files are not supported by the unit or the media server. Use the file format supported by both the unit and the media server (p. 39).

APPENDIX Troubleshooting En 60

The Internet radio cannot be played. The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may have been stopped. Try the station later or select another station.

The selected Internet radio station is currently broadcasting silence. Some Internet radio stations broadcast silence at certain of times of the day. Try the station later or select another station.

Access to the network is restricted by the firewall settings of your network devices (such as the router).

Check the firewall settings of your network devices. The Internet radio can be played only when it passes through the port designated by each radio station. The port number varies depending on the radio station.

The dedicated apps for mobile device does not detect the unit.

The MAC address filter is enabled on the unit. In MAC Address Filter in the setup menu, disable the MAC address filter or specify the MAC address of your mobile device to allow it to access to the unit (p. 48).

The unit and mobile device are not in the same network. Check the network connections and your router settings, and then connect the unit and mobile device to the same network.

Firmware update via the network (Network Update) fails.

It may not be possible depending on the condition of the network. Update the firmware via the network (Network Update) again or use a USB flash drive (p. 52).

The iPod does not recognize the unit when using AirPlay.

The unit and iPod/mobile device are connected to different SSIDs on the same access point.

Check the network connections for the unit and your mobile device, and connect them to the same SSID.

The app installed on a mobile device does not recognize the unit.

The unit cannot connect to the Internet via a wireless router (access point).

The wireless router (access point) is turned off. Turn on the wireless router (access point).

The unit and the wireless router (access point) are too far apart. Place the unit and the wireless router (access point) closer to each other.

There is an obstacle between the unit and the wireless router (access point).

Move the unit and the wireless router (access point) in a location where there are no obstacles between them.

Wireless network is not found. There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

Access to the network is restricted by the firewall settings of the wireless router (access point).

Check the firewall setting of the wireless router (access point).

Problem Cause Remedy

APPENDIX Troubleshooting En 61

SETUP

/ ENTER

NOTE Be sure that Bass Out of Subwoofer in the setup menu is set to Wireless (p.

45).

Pairing is the process of establishing a wireless connection between the center unit and subwoofer. When the center unit is turned on for the first time, the center unit and subwoofer are usually paired automatically. If a problem occurs (e.g., the STATUS indicator on the subwoofer does not glow green), follow the instructions below to pair the center unit and subwoofer manually.

1 Turn on the center unit.

2 Press the SETUP key.

3 Use the / keys to select Sound, and then press the ENTER key.

4 Use the / keys to select Subwoofer, and then press the ENTER key.

5 Use the / keys to select Pairing, and then press the ENTER key.

6 Use an object with a fine point, such as a pin, to hold down the SUBWOOFER PAIRING button on the subwoofer for more than 3 seconds.

The subwoofers STATUS indicator will rapidly blink green. Once pairing has been completed and the link between the center unit and subwoofer has been re-established, the STATUS indicator will glow green. Completed appears on the TV screen.

HINT If Not connected is displayed on the TV screen or the subwoofers STATUS

indicator does not glow green after 30 seconds have passed, repeat the procedure from step 2. If the problem persists, refer to No sound is coming from the subwoofer. in Troubleshooting (p. 56).

Pairing the center unit and subwoofer

SYSTEM CONNECTOR

SUBWOOFER PAIRING

INPUTSTATUS

SUBWOOFER PAIRING

STATUS

Rear panel of the subwoofer

APPENDIX Troubleshooting En 62

Specifications YAS-CU706

Item Specifications

Amplifier Section

Maximum Output Power

Front L/R 50 W x 2 ch

Tweeter 5 W x 2 ch

Subwoofer 100 W

Front L/R Section

Type Acoustic suspension type

Driver 5.5 cm (2-1/8") cone non-magnetic shielding type x 2

Frequency Response 220 Hz to 4 kHz

Impedance 6

Tweeter Section

Type

Driver Tweeter 19 mm (3/4") balanced dome magnetic shielding type x 4 (2 in use at any particular time)

Frequency Response 4 kHz to 23 kHz

Impedance 8

Subwoofer Section

Type Bass reflex type

Driver 7.5 cm (3") cone non-magnetic shielding type x 2

Frequency Response 100 Hz to 220 Hz

Impedance 6

Decoder Supported audio signal

Dolby Digital, Dolby Digital Plus, Dolby True HD DTS, DTS96/24, DTS Express, DTS-HD High Resolution / Master Audio PCM (2-channel, Multi-channel)

Input Jacks

HDMI 2 (HDMI IN 12)

Digital (Optical) 1 (TV)

Digital (Coaxial) 1 (COAXIAL)

Analog (RCA/stereo) 1 pair (ANALOG)

Output Jack

HDMI 1 (HDMI OUT (ARC))

Analog (RCA/monaural)

1 (SUBWOOFER OUT)

System connection 1 (SYSTEM CONNECTOR)

Other Jacks USB 1 (UPDATE ONLY)

LAN 1 (NETWORK)

Network

Ethernet standard: 100BASE-T/10BASE-T

Supported codecs

WAV (PCM format only) /AIFF/FLAC: up to 192 kHz ALAC: up to 96 kHz MP3/WMA/MPEG-4 AAC: up to 48 kHz

Compatible with DLNA ver. 1.5 AirPlay supported Internet Radio

Wireless LAN (Wi-Fi)

Wireless LAN Standards

IEEE802.11b/g/n

Radio Frequency Band

2.4 GHz

WPS (Wi-Fi Protected Setup)

Push-Button-Method, PIN Method

Security Type WEP, WPA2-PSK (AES), Mixed Mode

Bluetooth

Bluetooth version Ver. 2.1 +EDR

Radio Frequency Band

2.4 GHz

Supported profiles A2DP, AVRCP

Supported codecs Receiving: SBC, AAC Transmitting: SBC

Wireless output Bluetooth Class 2

Maximum communication distance

Approx. 10 m (33 ft) (without obstructions)

Supported content protection method

SCMS-T (receiving)

Item Specifications

APPENDIX Specifications En 63

NS-WSW121

General

Power Supply

U.S.A. and Canada models: AC 120 V, 60Hz Taiwan model: AC 110 - 120 V, 50/60Hz China model: AC 220V, 50Hz Other models: AC 220 - 240 V, 50/60Hz

Power Consumption 38 W

Standby Power Consumption

HDMI Control Off, Network Standby Off: 0.3 W HDMI Control On, Network Standby Off: 1.0 W HDMI Control Off, Network Standby On (Wired/Wi-Fi/Wireless Direct/Bluetooth): 1.9/2.0/2.0/1.7 W HDMI Control On, Network Standby On: 2.5 W

Dimensions (W x H x D)

950 x 72 x 131 mm (37-3/8" x 2-7/8" x 5-1/8") (installing the unit in front of a TV, etc.)

950 x 131 x 80 mm (37-3/8" x 5-1/8" x 3-1/8") (mounting the unit on a wall, with spacer)

Weight 5.4 kg (11.9 lbs)

Item Specifications

Item Specifications

Amplifier section

Output power 75 W (100 Hz, 6 , 10% T.H.D)

Dynamic power 130 W

Speaker section

Driver 14 cm (5-1/2 in) cone non-magnetic shielding type 1

Frequency response 40 Hz to 100 Hz

Input jacks Analog (RCA/ monaural)

1 (INPUT)

1 (SYSTEM CONNECTOR)

Wireless function

Radio frequency band 2.4 GHz

Maximum communication distance

10 m (33 ft) (without obstructions)

General

Power supply

U.S.A. and Canada models: AC 120 V, 60 Hz Taiwan model: AC 110120 V, 60 Hz Australia model: AC 240 V, 50 Hz China model: AC 220 V, 50 Hz Korea model: AC 220 V, 60 Hz Asia model: AC 220240 V, 50/60 Hz

Power consumption 75 W

Standby Power Consumption

1.5 W (Wireless) 1.5 W (Wired)

Dimensions (W x H x D)

295 297 307 mm (11-5/8 11-3/4 12-1/8 in)

Weight 9.1 kg (20 lbs)

APPENDIX Specifications En 64

HDMI signal Audio signals

HINT Refer to documentation supplied with the playback device, and set

the device appropriately. When CPPM copy-protected DVD-Audio is played back, video and

audio signals may not be output depending on the type of the DVD player.

This unit is not compatible with HDCP-incompatible HDMI or DVI devices. Refer to documentation supplied with the HDMI or DVI device for HDCP compatibility.

To decode audio bitstream signals on this unit, set the input source device appropriately so that the device outputs the bitstream audio signals directly (does not decode the bitstream signals on the device). Refer to documentation supplied with the device for details.

Video signals This unit is compatible with the following video signals. Deep Color

x.v.Color

3D video signal

High Dynamic Range (HDR) video

This unit is compatible with the following resolutions.

HINT The resolution of transmitted video signal varies according to

specifications of the TV connected to this unit.

Digital audio signal Optical/coaxial

HDMI (ARC)

The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.

Audio signal types

Audio signal formats

Compatible media

2ch Linear PCM 2ch, 32192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM

8ch, 32192 kHz, 16/20/24 bit

DVD-Audio, Blu- ray disc, HD DVD, etc.

Bitstream (SD Audio)

Dolby Digital, DTS

DVD-Video, etc.

Bitstream (HD Audio)

Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express

Blu-ray disc, HD DVD

VGA

480i/60 Hz

480p/60 Hz

576i/50 Hz

576p/50 Hz

720p/60 Hz, 50 Hz

1080i/60 Hz, 50 Hz

1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz

4K (4:4:4, 4:2:2, 4:2:0)/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz

Audio signal types

Audio signal formats

Compatible media

2ch Linear PCM 2ch, 3296 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio, etc.

Bitstream Dolby Digital, Dolby Digital EX, DTS, DTS-ES

DVD-Video, etc.

Audio signal types

Audio signal formats

Compatible media

2ch Linear PCM 2ch, 32192 kHz, 16/20/24 bit

TV

Bitstream Dolby Digital Plus, Dolby Digital, DTS

TV

APPENDIX Specifications En 65

This system is equipped with Yamahas AIR SURROUND XTREME virtual sound technology that achieves superior positional, high-grade 7.1 channel surround sound using the sound bar.

MusicCast is a trademark or registered trademark of Yamaha Corporation.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. DTS, Inc. All Rights Reserved.

The terms HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

x.v.Color and x.v.Color logo are trademarks of Sony Corporation.

DLNA and DLNA CERTIFIED are trademarks or registered trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited.

The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance. The Wi-Fi Protected Setup Identifier Mark is a certification mark of Wi- Fi Alliance. Wi-Fi, Wi-Fi Alliance, Wi-Fi CERTIFIED, Wi-Fi Protected Setup, WPA and WPA2 are trademark or registered trademark of Wi-Fi Alliance.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license.

Bluetooth Bluetooth is a technology for wireless communication employing the 2.4 GHz frequency band, which can be used without a license.

Handling Bluetooth communications The 2.4 GHz band used by Bluetooth compatible devices is a radio

band shared by many types of equipment. While Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio band, such influence may reduce the speed or distance of communications and in some cases interrupt communications.

The speed of signal transfer and the distance at which communications is possible differs according to the distance between the communicating devices, the presence of obstacles, radio wave conditions and type of equipment.

Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function.

Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Supports iOS 7 or later for setup using Wireless Accessory Configuration.

iTunes, AirPlay, iPad, iPhone, iPod, iPod nano, iPod touch, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.

AppStore App Store is a service mark of Apple Inc.

Android / Google Play Android and Google Play are trademarks of Google Inc.

Blu-ray Blu-ray Disc, Blu-ray, and the logos are trademarks of the Blue-ray Disc Association.

Explanations regarding GPL This product utilizes GPL/LGPL open-source software in some sections. You have the right to obtain, duplicate, modify, and redistribute this open-source code only. For information on GPL/LGPL open source software, how to obtain it, and the GPL/LGPL license,

refer to the Yamaha Corporation website (http://download.yamaha.com/sourcecodes/musiccast/).

Bluetooth protocol stack (Blue SDK) Copyright 1999-2014 OpenSynergy GmbH All rights reserved. All unpublished rights reserved.

Windows Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Internet Explorer, Windows Media Audio and Windows Media Player are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

APPENDIX Specifications En 66

Published 01/2019 KS-D0

Manual Development Group 2016 Yamah

Manualsnet FAQs

If you want to find out how the NS-WSW121 Yamaha works, you can view and download the Yamaha NS-WSW121 Subwoofer Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha NS-WSW121 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha NS-WSW121. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha NS-WSW121 Subwoofer Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha NS-WSW121 Subwoofer Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha NS-WSW121 Subwoofer Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha NS-WSW121 Subwoofer Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha NS-WSW121 Subwoofer Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.