Contents

Yamaha NS-10MMF Speaker Owner's Manual PDF

1 of 5
1 of 5

Summary of Content for Yamaha NS-10MMF Speaker Owner's Manual PDF

NS-10MMF SPEAKER SYSTEM

SYSTEME DENCEINTES

OWNERS MANUAL MODE DEMPLOI

BEDIENUNGSANLEITUNG

G R

NS-10MMT PRE(02.8.20)a 02.8.28, 11:39 AM1

E-2

Read this before using the speaker.

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

Install the speaker in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the speaker to rain or water.

To prevent the enclosure from warping or discoloring, do not place the speaker where it will be exposed to direct sunlight or excessive humidity.

Do not place the following objects on the speaker: Glass, china, etc.

If glass etc. falls by vibrations and breaks, it may cause personal injury.

A burning candle etc. If the candle falls by vibrations, it may cause fire and personal injury.

A vessel with water in it If the vessel falls by vibrations and water spills, it may cause damage to the speaker, and/or you may get an electric shock.

Do not place the speaker where foreign objects such as water drips might fall. It might cause a fire, damage to the speaker, and/or personal injury.

Do not place the speaker where it is liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance.

PRECAUTIONS

The speaker is constructed with the majority of the weight located in its upper portion, and is thus susceptible to falling over if proper care is not taken to insure its stability. If the speaker falls over, it may damage the speaker or be the cause of injury (or even death) to persons and/or damage to personal property.

For safe and proper use of the speaker: Position the speaker in a location that is solid, level,

smooth, and low (with respect to the floor). Do not push or apply pressure to the side of the speaker

when moving, or lean objects against the side of the speaker.

Do not sit on or set objects on top of the speaker.

Vibrations or jolts associated with earthquakes and other phenomena or activities may cause the speaker to fall over. For safety reasons, using commercially available products that increase stability in the speaker is recommended (metal fittings or chains, etc.).

PRECAUTIONS WHEN POSITIONING THE SPEAKERS

Thank you for selecting this YAMAHA NS-10MMF speaker system.

Placing the speaker on the same shelf or rack as the turntable can result in feedback.

Never put a hand or a foreign object into the port located on the rear of the speaker as this might cause personal injury and/or damage to the speaker.

When moving the speaker, do not hold the port as it might cause personal injury and/or damage to the speaker.

Any time you note distortion, reduce the volume control on your amplifier to a lower setting. Never allow your amplifier to be driven into clipping. Otherwise the speaker may be damaged.

When using an amplifier with a rated output power higher than the nominal input power of the speaker, care should be taken never to exceed the speakers maximum input.

Do not attempt to clean the speaker with chemical solvents as this might damage the finish. Use a clean, dry cloth.

Do not attempt to modify or fix the speaker. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

Secure placement or installation is the owners responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of the speaker.

1

NS-10MMF-Eng-B 02.8.28, 11:39 AM2

E n

g lish

E-3

SPEAKERS

LR

++

1

3

4

Before making connections, make sure that the amplifier is switched off.

CONNECTIONS Connect the screw-type input terminals at the rear of the

speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable.

One side of the speaker cable is red and the other side is black. Connect the (+) terminals on the amplifier (or receiver) and speakers using the red side. Connect the () terminals on both components using the black side of the cable.

Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, ). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass.

How to Connect:

1 Loosen the knob. 2 Remove the insulation coating at the extremity of each

speaker cable by twisting the coating off.

3 Insert the bare wire. 4 Tighten the knob and secure the cables.

Test the firmness of the connection by pulling lightly on the cables at the terminal.

Speaker (R) Speaker (L)

Note Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them.

When using a banana plug 1 Remove the cover by pulling it toward you. 2 Tighten the terminal knob. 3 Simply insert the banana plug into the terminal.

Using the non-skid pads Put the provided non-skid pads at the four corners on the bottom of speaker to prevent the speaker from moving by vibrations etc.

Black

Red Red

Speaker output terminals of the amplifier (or receiver)

CONNECTIONS TO YOUR AMPLIFIER

Non-skid pad

2

3Banana plug

1

Amplifier or Receiver

Black Black

2

NS-10MMF-Eng-B 02.8.28, 11:39 AM3

E-4

PLACING THE SPEAKERS

Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners.

Using as main speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owners manual supplied with your amplifier.

Note This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set.

Rear

Subwoofer Center

NS-10MMF

NS-10MMF

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at six points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six holes on the inner surface of the cover with the six corresponding pegs on the speaker and push gently.

Note When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

SPECIFICATIONS

Type ................................ 2-way bass-reflex speaker system Magnetic shielding type

Driver ................................... 9 cm (3-9/16) cone woofer x 2 2.2 cm (7/8) balanced dome tweeter

Impedance ...................................................................... 6

Frequency Response .................................. 55 Hz to 35 kHz

Nominal Input Power .................................................... 70 W

Maximum Input Power ................................................ 200 W

Sensitivity ..................................................... 86 dB/2.83 V/m

Crossover Frequency .................................................. 6 kHz

Dimensions (W x H x D) .................... 179 x 898.5 x 234 mm (7-1/16 x 35-3/8 x 9-3/16)

Weight .................................................. 9.8 kg (21 lbs. 9 oz.)

Accessories ................................................ Non-skid pad x 4 Speaker cable (4 m) x 1

Specifications subject to change without notice due to product improvements.

Care should be taken not to exceed the input power values noted above.

Rear center

3

NS-10MMF-Eng-B 02.8.28, 11:39 AM4

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUST

Manualsnet FAQs

If you want to find out how the NS-10MMF Yamaha works, you can view and download the Yamaha NS-10MMF Speaker Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha NS-10MMF as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha NS-10MMF. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha NS-10MMF Speaker Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha NS-10MMF Speaker Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha NS-10MMF Speaker Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha NS-10MMF Speaker Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha NS-10MMF Speaker Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.