Yamaha MS45DR Speaker Owner's Manual PDF

1 of 15
1 of 15

Summary of Content for Yamaha MS45DR Speaker Owner's Manual PDF

MONITOR SPEAKER MONITOR SPEAKER SYSTME DCOUTE SISTEMA DE MONIO

MS45DR Owners Manual Bedienungsanleitung Mode demploi Manual do Proprietrio

EN

DE

FR

PT

ZH

KO

JA

S-1

PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance (servicing) instructions in the literature accompanying the product.

The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.

IMPORTANT NOTICE: All Yamaha electronic products are tested and approved by an independent safety testing laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner, all foreseeable risks have been eliminated. DO NOT modify this unit or commission others to do so unless specifically authorized by Yamaha. Product perfor- mance and/or safety standards may be diminished. Claims filed under the expressed warranty may be denied if the unit is/has been modified. Implied warranties may also be affected.

SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of print- ing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.

ENVIRONMENTAL ISSUES: Yamaha strives to produce prod- ucts that are both user safe and environmentally friendly. We sin- cerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following:

Battery Notice: This product MAY contain a small non-recharge- able battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service repre- sentative to perform the replacement.

Warning: Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by applicable laws. Note: In some areas, the servicer is required by law to return the defective parts. However, you do have the option of having the ser- vicer dispose of these parts for you.

Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc.

NOTICE: Service charges incurred due to lack of knowledge relat- ing to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturers warranty, and are therefore the owners responsibility. Please study this manual care- fully and consult your dealer before requesting service.

NAME PLATE LOCATION: The graphic below indicates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase.

Model

Serial No.

Purchase Date

92-469- q (rear)

SPECIAL MESSAGE SECTION

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

S-2

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifi- cations not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accesso- ries and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instruc- tions could void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these require- ments provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not

occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to dis- tribute this type of product. If you can not locate the appro- priate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products dis- tributed by Yamaha Corporation of America or its subsidiar- ies.

* This applies only to products distributed by Yamaha Corporation of America. (class B)

FCC INFORMATION (U.S.A.)

COMPLIANCE INFORMATION STATEMENT (Suppliers declaration of conformity procedure)

Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011 Type of Equipment : MONITOR SPEAKER

Model Name : MS45DR

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation.

* This applies only to products distributed by Yamaha Corporation of America. (FCC SDoC)

S-3

The above warning is located on the rear of the unit.

Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magni- tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte- nance (servicing) instructions in the litera- ture accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accor-

dance with the manufacturers instructions. 8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta- cles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table speci- fied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/appara- tus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Ser- vicing is required when the apparatus has been dam- aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate nor- mally, or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

S-4

L'avertissement ci-dessus se trouve larrire de l'instrument.

Explication des symboles graphiques L'clair avec une flche l'intrieur d'un triangle quilatral est destin attirer l'attention de l'utilisateur sur la prsence d'une tension dangereuse non isole l'intrieur de l'appareil, pouvant tre suffisamment leve pour constituer un risque d'lectrocution.

Le point d'exclamation l'intrieur d'un triangle quilatral est destin attirer l'attention de l'utilisateur sur la prsence d'instructions importantes sur l'emploi ou la maintenance (rparation) de l'appareil dans la documentation fournie.

CONSIGNES DE SCURIT LIRE ATTENTIVEMENT 1 Lisez les instructions ci-aprs.

2 Conservez ces instructions.

3 Tenez compte des avertissements.

4 Suivez toutes les instructions.

5 N'utilisez pas cet instrument dans un milieu humide.

6 Employez uniquement un chiffon sec pour nettoyer l'instrument.

7 N'obstruez pas les ouvertures prvues pour la ventilation. Installez l'instrument conformment aux instructions du fabricant.

8 N'installez pas l'instrument prs d'une source de chaleur, notamment un radiateur, une bouche de chaleur, un pole ou autres (y compris les amplificateurs).

9 Ne modifiez pas les caractristiques de la fiche avec mise la terre polarise. Une fiche polarise est dote de deux broches (l'une est plus large que l'autre). Une fiche avec mise la terre comprend deux broches, ainsi qu'une troisime qui relie l'instrument la terre. La broche la plus large (ou troisime broche) permet de scuriser l'installation lectrique. Si vous ne pouvez pas brancher le cordon d'alimentation dans la prise d'alimentation, demandez un lectricien de la remplacer.

10 Protgez le cordon d'alimentation. Cela permet d'viter de marcher dessus ou de le tordre au niveau de la fiche, de la prise d'alimentation et des points de contact sur l'instrument.

11 N'employez que les dispositifs/accessoires indiqus par le fabricant.

12 Utilisez uniquement le chariot, le socle, le trpied, le support ou le plan indiqus par le fabricant ou livrs avec l'instrument. Si vous utilisez un chariot, soyez prudent si vous le dplacez avec l'instrument pos dessus pour viter de le renverser.

13 Dbranchez l'instrument en cas d'orage ou lorsque vous ne l'utilisez pas pendant des priodes prolonges.

14 Confiez toutes les rparations des techniciens qualifis. Des rparations sont ncessaires lorsque l'instrument est endommag, notamment dans les cas suivants : cordon d'alimentation ou fiche dfectueuse, liquides ou objets projets sur l'appareil, exposition aux intempries ou l'humidit, fonctionnement anormal ou chute.

(UL60065_03)

ATTENTION RISQUE D'LECTROCUTION

NE PAS OUVRIR

ATTENTION : POUR RDUIRE LES RISQUES D'LECTROCUTION, NE PAS RETIRER LE CAPOT (OU LE DOS). NE CONTIENT

PAS DE PICES NCESSITANT L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION,

FAIRE APPEL DES PROFESSIONNELS QUALIFIS.

AVERTISSEMENT N'UTILISEZ PAS L'INSTRUMENT SOUS LA PLUIE OU DANS UN ENVIRONNEMENT HUMIDE, FAUTE DE QUOI VOUS RISQUEZ DE PROVOQUER UN INCENDIE OU DE VOUS LECTROCUTER.

S-5

(weee_eu_en_02)

(weee_eu_de_02)

(weee_eu_fr_02)

(weee_eu_pt_02a)

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

For business users in the European Union: If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union: This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogerte

Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Gerte nicht mit dem normalen Haushaltsabfall entsorgt werden. In bereinstimmung mit Ihren nationalen Bestimmungen bringen Sie alte Gerte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.

Durch die fachgerechte Entsorgung der Elektrogerte helfen Sie, wertvolle Ressourcen zu schtzen, und verhindern mgliche negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Mllentsorgung auftreten knnten.

Fr weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogerte kontaktieren Sie bitte Ihre rtliche Stadt- oder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.

Information fr geschftliche Anwender in der Europischen Union: Wenn Sie Elektrogerte ausrangieren mchten, kontaktieren Sie bitte Ihren Hndler oder Zulieferer fr weitere Informationen.

Entsorgungsinformation fr Lnder auerhalb der Europischen Union: Dieses Symbol gilt nur innerhalb der Europischen Union. Wenn Sie solche Artikel ausrangieren mchten, kontaktieren Sie bitte Ihre rtlichen Behrden oder Ihren Hndler und fragen Sie nach der sachgerechten Entsorgungsmethode.

Informations concernant la collecte et le traitement des dchets dquipements lectriques et lectroniques

Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits lectriques ou lectroniques usags ne doivent pas tre mlangs avec les dchets domestiques habituels. Pour un traitement, une rcupration et un recyclage appropris des dchets dquipements lectriques et lectroniques, veuillez les dposer aux points de collecte prvus cet effet, conformment la rglementation nationale.

En vous dbarrassant correctement des dchets dquipements lectriques et lectroniques, vous contribuerez la sauvegarde de prcieuses ressources et la prvention de potentiels effets ngatifs sur la sant humaine qui pourraient advenir lors d'un traitement inappropri des dchets.

Pour plus d'informations propos de la collecte et du recyclage des dchets dquipements lectriques et lectroniques, veuillez contacter votre municipalit, votre service de traitement des dchets ou le point de vente o vous avez achet les produits.

Pour les professionnels dans l'Union europenne : Si vous souhaitez vous dbarrasser des dchets dquipements lectriques et lectroniques, veuillez contacter votre vendeur ou fournisseur pour plus d'informations.

Informations sur la mise au rebut dans d'autres pays en dehors de l'Union europenne : Ce symbole est seulement valable dans l'Union europenne. Si vous souhaitez vous dbarrasser de dchets dquipements lectriques et lectroniques, veuillez contacter les autorits locales ou votre fournisseur et demander la mthode de traitement approprie.

Informaes para os utilizadores relativas recolha e eliminao de equipamentos usados

Este smbolo, presente em produtos, embalagens e/ou includo na documentao associada, indica que os produtos eltricos e eletrnicos usados no devem ser eliminados juntamente com os resduos domsticos em geral. O procedimento correto consiste no tratamento, recuperao e reciclagem de produtos usados, pelo que deve proceder respetiva entrega nos pontos de recolha adequados, em conformidade com a legislao nacional em vigor.

A eliminao destes produtos de forma adequada permite poupar recursos valiosos e evitar potenciais efeitos prejudiciais para a sade pblica e para o ambiente, associados ao processamento incorreto dos resduos.

Para mais informaes relativas recolha e reciclagem de produtos usados, contacte as autoridades locais, o servio de eliminao de resduos ou o ponto de venda onde foram adquiridos os itens relevantes.

Informaes para utilizadores empresariais na Unio Europeia: Para proceder eliminao de equipamento eltrico e eletrnico, contacte o seu revendedor ou fornecedor para obter informaes adicionais.

Informaes relativas eliminao em pases no pertencentes Unio Europeia: Este smbolo vlido exclusivamente na Unio Europeia. Caso pretenda eliminar este tipo de itens, contacte as autoridades locais ou o seu revendedor e informe-se acerca do procedimento correto para proceder respetiva eliminao.

P-1

PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively bend or otherwise damage the cord, or place heavy objects on it.

Only use the voltage specified as correct for this product. The required voltage is printed on the name plate of this product.

Use only the supplied power cord/plug. Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

This instrument contains no user-serviceable parts. Do not open this product or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel.

Do not expose this product to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into this product, turn off the power immediately and unplug the power cord from the AC outlet. Then have this product inspected by qualified Yamaha service personnel.

Never insert or remove an electric plug with wet hands.

Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire.

When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged. - It emits unusual smells or smoke. - Some object has been dropped into this product. - There is a sudden loss of sound during use of this product.

CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to this product or other property. These precautions include, but are not limited to, the following:

Do not connect this product to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.

Do not use an AC outlet where the power plug fits loosely when inserted. Failure to observe this may cause a fire, electric shocks, or burns.

Insert the power plug firmly all the way into the AC outlet. Using the unit when it is not plugged in sufficiently can cause dust to accumulate on the plug, causing a fire or burns.

When removing the electric plug from this product or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.

Remove the electric plug from the outlet when this product is not to be used for extended periods of time, or during electrical storms.

Read carefully the attached documentation explaining the assembly process. Failure to assemble this product in the proper sequence might result in damage to the instrument or even injury.

Confirm that the finished installation is safe and secure. Also, carry out safety inspections periodically. Failure to observe this may cause devices to fall and result in injury.

Do not place this product in an unstable position where it might accidentally fall over.

Do not place this product in a poorly ventilated place. Inadequate ventilation in the room may cause the speakers to overheat, possibly resulting in malfunction or fire.

Before moving this product, remove all connected cables, to prevent damage to the cables or injury to anyone who might trip over them.

When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.

Use only the rack specified for this product. When attaching the satellite speakers to the rack, use the provided pipe clamps only. Failure to do so could cause this product to fall over or fall off the rack onto the floor, or cause damage to this product or rack. For more information on the specified rack, see page 3.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Assembly

Location

DMI-5 1/2

Before connecting this product to the drum module, turn off the power for both this product and the drum module. Before turning the power on or off, set all volume levels to minimum.

Be sure to set the volume levels of this product and the drum module to the minimum and gradually raise the volume controls while playing the drums to set the desired listening level.

Do not insert a finger or hand in any gaps on this product. Never insert or drop paper, metallic, or other objects into the gaps on the panel. This

could cause physical injury to you or others, damage to this product or other property, or operational failure.

Do not rest your weight on, or place heavy objects on this product, and do not use excessive force on the switches, knobs or connectors.

Do not use this product for a long period of time at a high or uncomfortable volume level since this can cause permanent hearing loss or cause damage to this product. If you experience any hearing loss or ringing in the ears, consult a physician.

Always turn the power off when this product is not in use. Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to this product at the minimum level. When you are not using this product for a long time, make sure you unplug the power cord from the wall AC outlet.

NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.

Handling Do not use this product in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the

instrument, TV, or radio may generate noise. When you use a smart phone, tablet, or any other smart devices near this product, we recommend that you set Airplane Mode to ON on that device in order to avoid noise caused by communication.

Do not expose this product to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation.

Do not place vinyl, plastic or rubber objects on this product, since this might discolor the panel.

Maintenance When cleaning this product, use a soft cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemical-impregnated

wiping cloths. Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch this products finish. During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of this product.

If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth.

Information

About this manual The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on

your speakers. The company names and product names in this manual are the trademarks or registered trademarks of their respective compa-

nies.

(rear_en_01)

Connections Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to this product, or data that is lost or destroyed.

The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the rear of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your pur- chase to aid identification in the event of theft.

Model No.

Serial No.

DMI-5 2/2

P-2

2

Thank you for purchasing the Yamaha MS45DR Monitor Speaker system. Before using the speakers, we ask that you thoroughly read this Owners Manual

to use the product in a safe manner.

Packing List

Controls & Connectors

Satellite speakers (2) Subwoofer speaker (1)

Pipe clamps (2)

8-pin Mini DIN / Phone / RCA pin combination cable (1)

Cable band (1)

Power cord (1) Owners Manual

(this document)

To prevent cables from getting in the way of your performance, use the included cable band to secure cables where necessary. Be sure to set cables away from the pedals.

q [ ] (Standby/On) Switch Switches Standby ( ) power to off (indicator is off) or On ( ) (indicator is on).

w [BASS VOLUME] control Use this control to adjust the volume of the subwoofer. Turn it clockwise to increase the volume and counterclock- wise to decrease it.

e [MASTER VOLUME] This dial controls the master volume. Turn the dial clockwise to increase the volume or counter-clockwise to decrease it.

r [TO DRUM MODULE / SATELLITE SP] jack This jack is used to connect the sub- woofer speaker to the satellite speakers and the drum module.

t [AC IN] jack Connect the included power cord to this connector.

[Front] [Rear]

e

r

t

q

w

Subwoofer speaker

Satellite speaker

1. First insert the speaker mount of the satellite speaker into the hole q of the pipe clamp, then tighten the wing bolt.

2. As shown in Figure A, slowly insert one leg of your drum rack through the hole w of the pipe clamp. When you finish adjusting the position, tighten the wing bolt as shown in Figure B.

3. See Figure C. Place the Subwoofer speaker on a flat floor.

4. Connect the satellite speakers, subwoofer speaker, and the drum module via the included combination cable as shown in Figure C.

Installing the Monitor Speakers

y

[Rear] y [INPUT] jack

This jack is used to connect the satellite speaker to the subwoofer.

CAUTION The MS45DR satellite speakers can be attached to straight vertical pipes of 1.5-inch (38.1-mm) diameter. These speakers cannot be attached to curved pipes or any pipes of different diameter sizes.

CAUTION Be sure to attach the satellite speakers to the leg of the drum rack slowly and deliberately to avoid injury.

Be sure to tighten the wing bolts securely.

Wing bolt

Pipe clampq

Speaker mount

Satellite speaker

NOTE

[Figure A] [Figure B]

Wing boltDrum rack leg

w

WARNING Use only the supplied power cord.

CAUTION When setting up the product, make sure that the AC out- let you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet.

3

4

A

B

A

B

C

C

D

E

B

A

CD

E

E

D

Satellite speaker

Drum module

Subwoofer speaker

Red White

OUTPUT L/MONOOUTPUT R

Satellite speaker

* The red RCA connector is for the right channel, and the white RCA connector is for the left channel.

[Figure C]

White

Red

RedRed

White

White

Use a commercially available Y cable if there is only one OUTPUT jack on your drum module.

Y-cable

Stereo audio plug

Mono phone jack

Mono phone jack

Examples of other setups The satellite speakers can be attached to other pipes on the drum rack, as in the examples shown below.

5. Connect the power cord to the [AC IN] jack on the subwoofer.

6. Plug the power cord into an AC wall socket or another electrical outlet.

Turning the power on

1. Lower the volume with the [MAIN VOLUME] control on the subwoofer speaker and the volume control on your drum module to the minimum.

2. Press the [ ](Standby/On) switch on the subwoofer speaker to turn the power on.

3. Turn on your drum module.

4. Adjust the volume with the [MAIN VOLUME] control on the subwoofer speaker and the volume control on your drum module while playing the pads.

Tuning the power off

1. Lower the volume with the [MAIN VOLUME] control on the subwoofer speaker and the volume control on your drum module to the minimum.

2. Press the [ ](Standby/On) switch on the subwoofer speaker to turn the power off.

3. Turn off your drum module.

Follow the order shown above in reverse when disconnecting the power cord.

Turning the power on or off

NOTE

CAUTION Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.

5

6

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

Troubleshooting

No sound comes from the satellite speakers or subwoofer.

The power cord is not properly plugged into the wall outlet.

Insert the power cord firmly into the wall outlet.

The [ ](Standby/On) Switch on the subwoofer is set to OFF.

Set the [ ](Standby/On) Switch to ON.

Connections are faulty or incomplete. Make sure the connections are secure. Make sure to use the included power cord.

The volume is set too low. Turn the [MASTER VOLUME] clockwise to increase the vol- ume.

Turn the subwoofer [BASS VOLUME] control clockwise to increase the volume.

Raise the volume on your drum module.

Sound is distorted. The volume is set too high. Turn the [MASTER VOLUME] counterclockwise to decrease the volume.

Turn the subwoofer [BASS VOLUME] control counterclock- wise to decrease the volume.

Lower the volume on your drum module.

The levels of the low frequency ranges in the Master EQ settings of your drum module are set too high.

Lower the Master EQ settings of your drum module. For details, refer to the Owners Manual that came with your drum module.

Sound is interrupted. The level of the signal being input is too high.

Turn down the volume on the instrument and/or the subwoofer speaker.

Noise occurs in the sound. Connections are faulty or incomplete. Make sure the connections are secure. Make sure to use the included power cord.

The speakers produce a pop sound whenever the power is turned ON or OFF.

The subwoofer is turned on before the drum module is turned on.

First turn on the drum module, and then turn on the subwoofer.

Specifications

Output power Satellite speakers 20 W + 20 W (2 kHz, 4 )

Subwoofer 20 W (60 Hz, 8 )

Frequency response Satellite speakers / Subwoofer speaker 4020000 Hz (-10 dB)

Speaker unit Satellite speakers Tweeter: 2 cm (0.8") dome (5 ) Midrange: 8 cm (3") cone (4.5 )

Subwoofer 16 cm (6.5") cone (8 )

Dimensions (W H D) Satellite speakers 110 183 138 mm (4 5/16" 7 3/16" 5 7/16" ) not including holder

Subwoofer 221 351 343 mm (8 11/16" 13 13/16" 13 1/2")

Weight Satellite speakers 1.0 kg (2 lb, 3 oz) 2

Subwoofer 6.5 kg (14 lb, 5 oz)

Accessories Pipe clamps* (2), combination cable (8 pin mini DIN to phone and RCA pin) (1), cable band (1), power cord (1), Owners Manual (this document) (1) * Can be attached to straight vertical pipes of 1.5-inch (38.1-mm) diameter.

MEMO

7

Manual Development Group 2019 Yamaha Corporation

Published 01/2019 20191

PO-A0

VCA3720

Manualsnet FAQs

If you want to find out how the MS45DR Yamaha works, you can view and download the Yamaha MS45DR Speaker Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha MS45DR as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha MS45DR. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha MS45DR Speaker Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha MS45DR Speaker Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha MS45DR Speaker Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha MS45DR Speaker Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha MS45DR Speaker Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.