Contents

Yamaha ATS-1090 Soundbar Update Guide PDF

1 of 8
1 of 8

Summary of Content for Yamaha ATS-1090 Soundbar Update Guide PDF

EN

YAS-109 / ATS-1090

Update Guide

Table of contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

1.1. Equipment required for firmware update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

1.2. Preparing the firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

2. Updating the units firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

3. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

3.1. Flashing (red) indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

3.2. Indicators off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

1. Introduction This Guide provides instructions for updating firmware with a USB flash drive on the following products.

YAS-109

ATS-1090

Sold only in certain countries or regions

See product pages on the Yamaha website for details regarding the issues resolved, and functions added, by updating firmware.

1.1. Equipment required for firmware update

Prepare the following items before attempting to update firmware.

USB flash drive: use a USB flash drive that meets all of the following requirements.

Supports the USB mass storage device class

Formatted in FAT16 or FAT32 format

No encryption applied

No data stored on the device (empty)

Computer that can be connected to the Internet: download the firmware from the Yamaha website.

1.2. Preparing the firmware

Download the latest version of firmware from the Yamaha website, and then save the firmware data file to your USB flash drive.

1. Download the latest version of firmware from the Yamaha website to a computer. See product pages on the Yamaha website for more information.

2. Decompress the downloaded file and save the firmware data file to the USB flash drive.

Be sure to save the firmware data files in the top folder (root folder) of the USB flash drive.

Do not change the file name when saving it. File names are as follows:

mcu.enc

update.enc

yamaha_usb_upgrade.enc

yamaha_ver.txt

1. Introduction

YAS-109 / ATS-1090 Update Guide | 1

2. Updating the units firmware Update the firmware of the unit.

1. Turn off the unit.

2. Unplug the power cable from the AC wall outlet.

3. Connect the USB flash drive to the UPDATE ONLY jack on the unit.

USB flash drive containing the

firmware data file

4. Plug the power cable into an AC wall outlet.

5. Touch and hold (volume -) and (power) together for at least 3 seconds.

The firmware update begins. The (wireless) indicator will flash as shown below (interval of flashing: approx. one second) while the firmware is being updated.

The update will be finished within 10 minutes. The indicators will flash as shown below when the firmware update has been successfully completed.

Flashes

If indicators flash differently than shown above, or fail to glow or flash at all, see Troubleshooting. Depending on the firmware virsion, this unit restart automatically when the firmware update is successfully completed.

6. Touch (power) when the firmware update is complete.

7. Disconnect the USB flash drive. The firmware update has been completed.

Notice

Do not unplug the power cable or disconnect the USB flash drive until the following procedures are completed.

2. Updating the units firmware

2 | YAS-109 / ATS-1090 Update Guide

Note

When the firmware version of the unit is newer than the firmware to be installed, the update does not begin.

2. Updating the units firmware

YAS-109 / ATS-1090 Update Guide | 3

3. Troubleshooting If the firmware update fails, the indicators will flash as illustrated below. Confirm the problem and try updating the firmware again.

3.1. Flashing (red) indicator

Flashes (red)

3.1.1. The USB flash drive is not connected to the unit correctly.

1. Terminate the update by touching (power).

2. Connect the USB flash drive to the unit correctly.

3. Try updating the firmware again.

3.1.2. The firmware data file was not properly saved to the USB flash drive.

1. Terminate the update by touching (power).

2. Disconnect the USB flash drive and be sure that the firmware data file has been saved as follows:

the file name has not been changed, and

the file is stored in the top folder (root folder).

3. Connect the USB flash drive and try updating the firmware again.

3.1.3. The USB flash drive was disconnected from the unit while firmware was being updated.

1. Terminate the update by touching (power).

2. Connect the USB flash drive to the unit correctly.

3. Try updating the firmware again.

3.1.4. The USB flash drive is damaged.

1. Terminate the update by touching (power).

2. Save the firmware data file to another USB flash drive and try updating the firmware again.

3.1.5. There is a problem with the firmware data file.

1. Terminate the update by touching (power).

2. Download the firmware data file for your unit from the Yamaha website and save it to the USB flash drive.

3. Try updating the firmware again.

3.2. Indicators off

3. Troubleshooting

4 | YAS-109 / ATS-1090 Update Guide

3.2.1. The power cable was unplugged while firmware was being updated.

1. Plug the power cable into an AC wall outlet.

2. Be sure that the USB flash drive is correctly connected to the unit.

3. Touch (power). The firmware update will resume.

3.2.2. A power failure occurred.

1. Be sure that the USB flash drive is correctly connected to the unit.

2. Touch (power). The firmware update will resume.

3. Troubleshooting

YAS-109 / ATS-1090 Update Guide | <

Manualsnet FAQs

If you want to find out how the ATS-1090 Yamaha works, you can view and download the Yamaha ATS-1090 Soundbar Update Guide on the Manualsnet website.

Yes, we have the Update Guide for Yamaha ATS-1090 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Update Guide should include all the details that are needed to use a Yamaha ATS-1090. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha ATS-1090 Soundbar Update Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha ATS-1090 Soundbar Update Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha ATS-1090 Soundbar Update Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha ATS-1090 Soundbar Update Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha ATS-1090 Soundbar Update Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.