Contents

Yamaha ATS-1010 Soundbar Owner's Manual PDF

1 of 20
1 of 20

Summary of Content for Yamaha ATS-1010 Soundbar Owner's Manual PDF

U

Front Surround System

ATS-1010

OWNERS MANUAL

i En

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in

accordance with the manufacturers instructions. 8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference.

FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.

ii En

Yamaha and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Associations Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3 NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

4 Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures:

5 Relocate either this product or the device that is being affected by the interference.

6 Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

7 In the case of radio or TV interference, relocate/ reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

8 If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave., Buena Park, CA 90620.

9 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

We Want You Listening For A Lifetime

iii En

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances. Top: 5 cm (2 in) Rear: 5 cm (2 in) Sides: 1 cm (3/8 in)

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: Other components, as they may cause damage and/or

discoloration on the surface of this unit. Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury. Containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable. 11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this unit must be used. Using

this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the Troubleshooting section on common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press to set this unit in standby mode, and disconnect the power supply cable from the wall outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power supply cable from the outlet, then leave the unit alone.

19 Install this unit near the wall outlet and where the AC power plug can be reached easily.

20 The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

21 Secure placement or installation is the owners responsibility. Yamaha shall not be liable for any accident caused by improper placement or installation of speakers.

Caution: Read this before operating your unit.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by . In this state, this unit is designed to consume a very small quantity of power.

(Power key) Turns on the power of this unit or sets it to the standby mode.

1 En

E n

g lish

F ran

ais D

eu tsch

S ven

ska Italian

o E

sp a

o l

N ed

erlan d

s

Supplied items ............................................2 Front panel .................................................2 Placing........................................................3 Connection .................................................4 Operation....................................................6

Enjoying sound with your preference ......... 7 Additional Information ................................ 8 Operation indicators of the unit ................ 11 Troubleshooting ....................................... 12 Specification............................................. 14

Contents

In this manual, operations that can be performed using either the front panel buttons or the remote control are explained using the remote control.

y indicates a tip for your operation. Notes contain important information about safety and operating instructions. This manual is produced prior to production. Design and specifications are subject to change in part as a result of

improvements, etc. In case of differences between the manual and the product, the product has priority.

Do not spill water or other liquids on the remote control. Do not drop the remote control. Do not leave or store the remote control in the following places:

- places of high humidity, such as near a bath - places of high temperatures, such as near a heater or a stove - places of extremely low temperatures - dusty places

Do not expose the remote control sensor of this unit to direct sunlight or lighting such as inverted fluorescent lamps. If the batteries grow old, the effective operation range of the remote control decreases considerably. If this happens,

replace the batteries with two new ones as soon as possible. Do not use old batteries together with new ones. Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging

carefully as these different types of batteries may have the same shape and color. Exhausted batteries may leak. If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material

or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Do not throw away batteries with general house waste. Dispose of them correctly in accordance with your local regulations. Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor immediately. When not planning to use the remote control for long periods of time, remove the batteries from the remote control. Do not charge or disassemble the supplied batteries.

About this manual

Notes on the remote control and batteries

What you can do with this unit Enjoy high quality surround sound (AIR SURROUND XTREME)............................ 7 Enjoy clear dialogue and narration (Clear voice) ......................................................... 7 Maintain a consistent volume level between different channels, programs,

commercials. (UniVolume) .......................................................................................... 7 Operate the unit by the TVs remote control (TV remote control learning)................. 9

2 En

Before assembly and connecting, make sure you have received all of the following items.

1 Indicators Light up to show the system condition.( P. 11)

y The indicators automatically become darker if the unit is left turned on for 5 seconds without any operation being performed. (Auto dimmer function)

2 Remote control sensor Receives infrared signals from the remote control of this unit.

3 TV remote control sensor Receives infrared signals from the TV remote control.

4 INPUT Selects an input source you want to listen to. ( P. 6)

5 VOLUME /+ Controls the volume of the unit. ( P. 8)

6 (Power) Turns on the unit, or sets it to standby mode.

Supplied items

Front panel

Remote control 1

Battery 2 (AAA, R03, UM4)

Spacer 2 (for attaching to a wall)

Mounting template 1

Optical cable 1 (1.5 m (4.9 ft))

Main unit 1

1

2 3

4 65

3 En

E n

g lish

Installation: illustrated examples

Example 1: Unit beneath TV Example 2: Unit without stand beneath TV ( P. 9) Example 3: Wall mounting

Do not place the unit on/under any other components such as BD player in a pile. The vibration of the unit may cause system failure, etc. in other components.

Depending on your installation environment, connections to external components such as TV or BD player can be done before installing the unit. We recommend that you temporarily place and arrange all components in order to decide which procedure is best done first.

When you clean the unit, use a clean, dry and soft cloth (such as cloth for glasses).

Do not touch the grille on the front and bottom of the unit.

Place the unit away from your TV more than 50 mm (2) so as not to damage your TV with rear panel of the unit. The brackets on the rear of the unit are removable.

You can attach the unit to a wall using the brackets on the rear of the unit.

1 Attach the supplied mounting template on a wall and mark the holes of the mounting template.

2 Remove the mounting template and then install the commercially available screws and the supplied spacers at the marks.

3 Hang the unit on the screws using the brackets on the rear of the unit.

Do not attach the unit to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the unit to fall.

Use commercially available screws that can support the weight of the installation.

Make sure you use specified screws to attach the unit. Using clamps other than specified screws, such as short screws, nails, or two-sided tape, may cause the unit to fall.

When connecting the unit, fix the cables in place where they will not become loose. If your foot or hand accidentally gets caught on a loose cable, the unit may fall.

After attaching the unit, check that the unit is fixed securely. Yamaha will bear no responsibility for any accidents caused by improper installations.

Placing

Notes

Attaching the unit to a wall

When installing the unit on a wall, all installation work must be performed by a qualified contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the unit to fall, resulting in personal injury.

Example 1 Example 2 Example 3

Notes

Tapes or thumbtacks

Mark

7 to 9 mm (1/4 to 3/8)

2 to 4 mm (1/16 to 3/16)

Minimum 20 mm (3/4)

4 mm (#8)

Spacer (5 mm (1/4))

4 En

Do not connect the power cable until all connections are completed. Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug

and/or terminal.

As connections are completed, set your TV as below before operation. Set the volume of the TV to minimum. If applicable, set the audio output of your TVs built-in speakers to off.

Connection

Connecting a TV

The unit plays the audio output from your TV. Connect input components such as a BD player, etc., to your TV first and check the components play properly before connecting to the unit. See the manuals of your TV and BD player, etc., for details. After that, connect the unit to your TV as the illustration below.

Setting your TV

OPTICAL OUTPUT

SYSTEM CONNECTOR

SUBWOOFER OUT

SYSTEM CONNECTOR

SUBWOOFER OUT

BD player STB

Optical cable (supplied)

TV

1. Remove the cap

To AC wall outlet

2. Check the direction of the plug

Connection

5 En

E n

g lish

yAlternative connections

Refer to Using an external subwoofer ( P. 8) for details on the use of an external subwoofer and appropriate settings of the unit.

* If connecting an external Yamaha subwoofer, use the cable supplied with the subwoofer to enable synchronous on/ off switching of the unit and subwoofer.

Connect the input components (BD player, STB, etc) to the unit directly in the following cases. When the unit does not play the sound output from the components connected to your TV ( P. 4). When your TV does not have any audio input jacks to connect input components, such as a BD player, etc.

SYSTEM CONNECTOR

SUBWOOFER OUT

SYSTEM CONNECTOR

MONAURAL INPUT

OPTICAL OUTPUT

COAXIAL OUTPUT

SYSTEM CONNECTOR

SUBWOOFER OUT

System connector cable (commercially available)*

Subwoofer cable (sold separately)

Optical cable (sold separately)

Audio digital pin cable (sold separately)

External subwoofer

BD player

STB

6 En

Once you have finished all cable connections and remote control operation, follow the procedure below to start basic playback operation.

1 (Power): Turns on the unit, or sets it to standby mode.

2 Input buttons: Select the input source you want to listen to.

3 UNIVOLUME: Turns UniVolume mode on and off. ( P. 7)

4 CLEAR VOICE: Turns Clear voice mode on and off. ( P. 7)

5 AUDIO DELAY: Turns the audio delay adjusting mode on and off. ( P. 8)

6 SURROUND/STEREO: Switch surround/stereo mode. ( P. 7)

7 SUBWOOFER +/: Adjust the subwoofer volume. ( P. 8)

8 VOLUME +/: Adjust the volume. ( P. 8)

9 MUTE: Switches mute mode on and off. ( P. 8)

Before installing batteries or using the remote control, make sure that you read precautions on the remote control and batteries in Notes on the remote control and batteries ( P. 1).

Use the remote control within 6 m (20 ft) of the main unit and point it toward the remote control sensor.

Operation

Remote control

1

2

8

9

53

6

4

7

Installing the batteries

Operation range

1 3

2

Within 6 m (20 ft)

Enjoying sound with your preference

7 En

E n

g lish

1 Turn your TV on.

2 Press the TV button to switch the input of the unit to TV.

The unit plays the TV sound. The INPUT indicator lights up in green. ( P. 11)

3 Switch the input of your TV if you use components such as a BD player.

yWhen you play back components such as a BD player connected to the audio input jack of the unit.

1 Switch the video input of your TV to the video source such as a BD player.

2 Press the BD/DVD or STB button to switch the input of the unit.

The color of INPUT indicator depends on the selected input. ( P. 11)

3 Start playback.

y For information on the external component, refer to the instruction manual for the product.

Playback in surround sound: You can enjoy a realistic sound effect using Yamahas exclusive AIR SURROUND XTREME. Playback in stereo sound: An extended sound is achieved for a 2 channel source.

While watching the TV, compensate the excessive volume differences to make it easier to hear during the following cases. When switching the channel When a TV program changed to commercial When one program is finished and another program

started

This function makes dialogue in movies, TV dramas or play-by-play broadcasting clear to listen to.

Basic playback operation

Enjoying sound with your preference

Switching stereo/surround sound

Surround Stereo

Green No light

Automatic volume level adjustment (UniVolume)

Hear narration or dialogue from your TV more clearly (Clear voice)

On/Off Green

GreenOn/Off

Additional Information

8 En

Press VOLUME +/ to adjust the volume level.

The color of qD DTS indicator changes depending on the adjustable range. Green indicates a lower volume level, orange a moderate level, and red a higher level.

Note that when the qD DTS indicator is red, the volume is set to a higher level. Excessive sound may damage your hearing or bother others.

y To turn off the volume temporarily, press MUTE.

To resume the volume, press MUTE again or press VOLUME +/.

Press SUBWOOFER +/ to adjust the bass level.

The color of qD DTS indicator changes depending on the bass level. Green indicates a minus level, orange a standard level (default value is 0), and red a plus level.

You can use this function to delay sound to synchronize with a lagging video image.

1 Press and hold AUDIO DELAY more than 3 seconds to enter adjustment mode.

2 Press SUBWOOFER +/ to adjust the delay time. (+ increases the delay time)

The color of qD DTS indicator changes depending on the adjustable range. Green indicates a shorter delay time, orange a medium delay, and red a longer delay.

3 Press AUDIO DELAY to exit the adjustment mode.

y The adjustment mode is canceled if the unit is left for 20 seconds without any operation being performed.

Although the unit has a subwoofer built-in, you can use commercially available powered subwoofer of your choice. Refer to Alternative connections ( P. 5).

1 Set the unit to standby mode.

2 Press both the VOLUME button and button of the main unit, release the button first, then release the VOLUME button.

This unit is turned on when switching between the built-in subwoofer and external subwoofer. The SURROUND indicator lights up as the following illustration. Check if the setting is correct. ( P. 11)

The default setting is playback of the built-in subwoofer.

You can verify the current setting by turning the unit on again from standby mode.

You cannot use the built-in subwoofer and the external subwoofer simultaneously.

Adjust the volume level

Note

Adjust the subwoofer level

Up

Down

Audio delay control

Flashes in green ( P. 11)

Make the delay time longer

Make the delay time shorter

Additional Information

Using an external subwoofer Built-in subwoofer

External subwoofer

The SURROUND indicator (for 2 seconds after the unit is turned on)

Note

Green No light

Additional Information

9 En

E n

g lish

TV remote control operation may be difficult if the unit hides the sensor of your TV when beneath or under the TV. Try the two solutions below and see whether this solves the problem.

1 Move the unit in all directions.

2 Remove the stands to lower the height of the unit.

Keep the stands and screws in a safe place for future use.

If you cannot solve the problem by the suggestions above, follow the procedure below and use the TV remote control relay function, which relays the TV remote control signal received at the front of the unit to the remote control sensor of your TV through the TV remote control signal transmitter at the rear of the unit.

1 Set the unit to standby mode.

2 Press both the VOLUME + button and button of the main unit, release the button first, then release the VOLUME + button.

The unit is turned on when switching the TV remote control relay function on/off. The CLEAR VOICE indicator lights up as the following illustration. Check if the setting is correct. ( P. 11)

The default setting is off. You can verify the current setting by turning the

unit on again from standby mode.

Move the unit in all directions again if TV remote control remains difficult.

The TV remote control relay function is enabled even if the unit is in standby mode.

You can use the TV remote control solely to operate by having the unit learn the TV remote control operations. You can operate the following functions by TV remote control. Volume down Volume up Power on/standby mode

y Some TV remote controls may not control these functions. Use the remote control supplied with the unit in this case.

1 Set the unit and TV to standby mode.

2 Press both the INPUT button and button of the main unit, release the button first, then release the INPUT button.

The unit enters the remote control learning mode.

Operation by the TV remote control is difficult (with unit beneath/under TV)

Note

Using TV remote control relay function

Use a + driver to remove the screws. The unit will be 19 mm lower without the stands.

The remote control sensor of your TV

TV remote control signal transmitter

On Off

The CLEAR VOICE indicator (for 2 seconds after the unit is turned on)

Notes

Operate the unit by TV remote control (TV remote control learning function)

No light Green

Flashes in red

Continued to the next page. \

Additional Information

10 En

3 Press the button below of the main unit to select the operation you want the unit to learn.

4 Point your TV remote control at the remote control sensor and press the respective button twice or three times until the indicator changes from flashing green to lit green.

Fault in learning The UNIVOLUME, CLEAR VOICE and SURROUND indicators flash in green simultaneously for about 3 seconds.

5 Repeat steps 3 and 4 to make the unit learn the other operations.

6 Press the button of the main unit for more than 3 seconds to finish the remote control learning mode.

Release the button of the main unit when all the indicators light up in green. The unit enters standby mode.

The unit will automatically set to standby mode if the unit in the remote control learning mode is left turned on for 5 minutes without any operation being performed.

If learning fails, try again with your TV turned off. Note that screen glare may disturb TV remote control learning.

1 Set the unit to standby mode.

2 Press both the INPUT button and button of the main unit, release the button first, then release the INPUT button.

3 Press the INPUT button of the main unit again for more than 3 seconds.

4 Release the INPUT button of the main unit when qD DTS indicator flashes.

Press the button of the main unit for more than 3 seconds to finish the remote control learning mode, or to have the unit learn operations of another TV remote control.

Should the unit freeze for any reason, this may be remedied by initiating the factory settings.

1 Set the unit to standby mode.

2 Press and hold the button of the main unit for more than 3 seconds.

All the indicator flashes in green.

3 Release the button of the main unit.

Operation you want the unit to

learn

The button of the unit

The Indicator flashes in green

Volume down VOLUME

Volume up VOLUME +

Power on/standby mode

Press (1 sec)

Release (1 sec)

Press (1 sec)

Flashes rapidly

Indicator

Approx. 30 cm (1 ft)

Flashes

Flashes rapidly

Success in learning

e.g. Volume up

Notes

Removing all learned TV remote control operations

Resetting the unit

Flashes in red

11 En

E n

g lish

Immediately after turning on the unit, the indicators show the state of the unit as below.

The indicators show the setting mode as below.

* These indicators light up according to the state.

Operation indicators of the unit

The six indicators are placed in the above order, and their color and appearance are symbolically represented as below. : Lights up in green : Lights up in red : Lights up in orange : No light : Flashes in green : Flashes in red

Indication immediately after turning on the unit

Playback of the subwoofer ( P. 8)

TV remote control relay function ( P. 9) Indicators

Built-in subwoofer Off

External subwoofer Off

Built-in subwoofer On

External subwoofer On

Indication of the setting mode

Setting mode Indicators

Audio delay control ( P. 8) *

TV remote control learning ( P. 9) *

Normal indication

INPUT

: TV

: BD/DVD

: STB

: Stand-by

SURROUND

: Surround playback

: Stereo playback

CLEAR VOICE

: Clear voice on

: Clear voice off

UNIVOLUME

: UniVolume on

: UniVolume off

qD DTS

: Dolby Digital

: PCM

: DTS Digital Surround

qPL II

: Surround playback of 2ch stereo signal input

: Stereo

playback Surround

playback of surround signal input: Mute

12 En

Refer to the chart below should the unit not function properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, set the unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. Check the below first. 1 The AC power supply cable of the unit, TV and external components (such as BD player) are firmly connected to

the AC wall outlet. 2 The power supply of the unit, TV and the external components (such as BD player) are turned on. 3 All cables are firmly connected to their respective jacks on each component.

Troubleshooting

Problem Cause Solution See page

Power turns on but immediately shuts off.

The power cable may be connected improperly. Make sure the power cable is plugged into the outlet firmly.

4

The unit may have received a strong electrical shock, such as from a lightening bolt or excessive static electricity.

Set the unit to standby mode, and then disconnect the power cable. Wait for about 30 seconds, connect the power cable, and then turn the unit on again.

The unit has an auto-sleep function, which will automatically set to standby mode if the unit is left turned on for 12 hours without any operation being performed.

The speakers make no sound.

The volume may be set to minimum. Adjust the volume level. 8

The mute function may be activated. Press MUTE on the remote control to cancel the mute function and adjust the volume.

8

The input source or input setting may be incorrect.

Select the correct input source or input setting. 7

Surround effect is not achieved.

A surround mode is not selected. Press SURROUND on the remote control to play back the source in surround effect.

7

No bass / The external subwoofer makes no sound.

The volume of the subwoofer channel may be set to minimum level.

Adjust the volume level of the subwoofer. 8

Opposite setting of subwoofer is selected. Select collect setting of subwoofer. 8

The source does not contain low frequency signals.

The cable between the unit and the subwoofer not connected when selecting playback of the external subwoofer.

Connect the unit and the external subwoofer by using a subwoofer pin cable.

5

The volume level decreases without any operation.

The unit controls its volume within a certain level to prevent the next playback from sudden output at excessive volume.

Reset the volume. 8

This unit does not operate properly.

The unit may receive a strong electrical shock, such as from a lightening bolt or excessive static electricity, or drop in power supply.

Set the unit to standby mode, and then disconnect the power cable. Wait for about 30 seconds, connect the power cable, and then turn on the unit again.

A digital or high-frequency equipment produces noises.

The unit may be placed close to digital equipment or high-frequency equipment.

Place the unit away from such equipment.

The remote control does not operate the unit.

The unit may be outside the remote control operation range.

The operation range for the remote control of the unit is within 6 m (20 ft).

6

The remote control sensor of the unit may be exposed to direct sunlight or other lighting.

Change the lighting or reposition the unit.

The batteries may be worn out. Replace the batteries. 6

The volume of the unit and TV increases simultaneously.

Your TV itself received the signal from TV remote control, having learned the operation of the unit.

Set the volume of your TV to minimum, or set the audio output of your TV built-in speaker to off.

Adjust the volume by using the remote control of the unit.

8

Troubleshooting

13 En

E n

g lish

Contact your nearest authorized Yamaha dealer or service center if the following problem occurs.

The volume, subwoofer and audio delay time is not adjustable.

The adjustment has reached the maximum or minimum.

8

The unit does not learn the operation of TV remote control.

The remote control sensor of the unit may be exposed to direct sunlight or lighting.

Reposition the unit.

The screen glare of TV disturbs the remote control signal.

Disconnect the power cable and perform the remote control learning operation again.

The batteries of TV remote control may be worn out.

Replace the batteries.

The button of the unit was not pressed long enough for the remote control learning operation.

Press the button of TV remote control in the order press 1 second release 1 second press 1 second

9

The TV remote control is not available for remote control learning.

Use the remote control of the unit. 9

The TV remote control is outside of the operation range.

Point your TV remote control towards the remote control sensor of the unit keeping a distance of 30 cm (1 ft) between them.

9

The unit does not enter the remote control learning mode.

Operate after checking that the INPUT indicator is flashing in red.

9

The power state of the unit and of your TV is opposite. (For example, though your TV is on, the unit is in standby mode.)

The power state of the unit and of your TV is opposite from the beginning.

Press the power button of TV remote control to set your TV and the unit to standby mode after pressing the power button of your TV itself and of the unit to set both your TV and the unit to on.

9

The TV remote control is out of work even if you use TV remote control relay function.

The unit and TV are too close/far from one another.

Try to use the TV remote control relay function again after repositioning the TV remote control signal transmitter of the unit and the remote control sensor of your TV.

9

Try to use the TV remote control relay function again after adjusting the height of the unit by removing or attaching its stands.

9

Something is between the unit and your TV. Remove the obstruction.

The TV remote control relay function is not activated.

Restart the unit and check the indicator status. 9

The TV remote control is not compatible with the TV remote control relay function.

Place the unit (without the stands, for example) so as not to hide the remote control sensor of your TV.

9

You cannot use 3D glasses. The unit obstructs the 3D glasses transmitter of your TV.

Check the position of 3D glasses transmitter of your TV by referring to the manual of your TV, and move the unit to the position where there is no obstruction.

The picture on your TV screen becomes blurred or distorted.

The unit is too close to your CRT TV. Move the unit away from your TV.

Problem Cause Solution See page

The power of the unit immediately shuts off, and the INPUT indicator flashes.

The protection circuit is activated.

Problem Cause Solution See page

14 En

Amplifier section Minimum RMS Output Power

Front Left and Right (1 kHz, 1% THD, 6 ) .......................................................................24 W + 24 W

Subwoofer (100 Hz, 1% THD, 3 )...........................48 W

Maximum Power

Front Left and Right (1 kHz, 10% THD, 6 ) .......................................................................30 W + 30 W

Subwoofer (100 Hz, 10% THD, 3 ) .........................60 W

Speaker section Type

Front speaker ........................... Accoustic suspension type/

Non-magnetic shielding type Subwoofer.................................................Bass reflex type/

Non-magnetic shielding type Driver

Front speaker .............................6.5 cm (2-1/2 in) cone 2

Subwoofer........................................ 7.5 cm (3 in) cone 2

Impedance

Front speaker .................................................................6 Subwoofer......................................................................3

Frequency Response (-10 dB, Stereo mode)

Front speaker .......................................... 150 Hz to 20 kHz

Subwoofer................................................. 50 Hz to 150 Hz

Input Jacks Optical ...................................................... 2 (TV,BD/DVD)

Coaxial ................................................................... 1 (STB)

Output Jacks Subwoofer ......................................................................... 1

System Connector (for subwoofer power interlock) ......... 1

General Power Supply .......................................... AC 120 V, 60 Hz

Power Consumption....................................................22 W

Standby Power Consumption.................... Less than 0.5 W

Dimensions (W H D)

With stands.......................................890 107 120.5 mm

(35-1/8 4-1/4 4-3/4 in) Weight ........................................................ 4.2 kg (9.3 lbs.)

* Specifications are subject to change without notice.

This system employs new technologies and algorithms that make it possible to achieve 7-channel surround sound with only front speakers, and without using wall reflections.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Surround are registered trademarks of DTS, Inc.

UniVolume is a trademark of Yamaha Corporation.

Specification

Manualsnet FAQs

If you want to find out how the ATS-1010 Yamaha works, you can view and download the Yamaha ATS-1010 Soundbar Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha ATS-1010 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha ATS-1010. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha ATS-1010 Soundbar Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha ATS-1010 Soundbar Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha ATS-1010 Soundbar Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha ATS-1010 Soundbar Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha ATS-1010 Soundbar Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.