Contents

Yamaha CDX-E400 Receiver Owner's Manual PDF

1 of 32
1 of 32

Summary of Content for Yamaha CDX-E400 Receiver Owner's Manual PDF

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VSTRA FRLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia V922180

CRX-E400

OWNERS MANUAL MODE DEMPLOI

BEDIENUNGSANLEITUNG BRUKSANVISNING

MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Receiver/CD Player Rcepteur/Lecteur CD

GB

RX-E400 CDX-E400

C R

X -E

4 0 0

0101CRXE400(M)./H1-H4.E 02.6.13, 7:30 PM1

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place away from direct sunlight, heat sources, vibration, dust, moisture or cold. In a cabinet, allow about 10 cm (4 in.) of free space all around RX-E400 for adequate ventilation.

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, nor locate this unit in an environment with high humidity (i.e., a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign objects may fall onto this unit or where this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: Other components, as they may cause damage and/or

discoloration on the surface of this unit. Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury. Containers with liquid in them, as they may fall, spilling

the liquid and causing an electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use excessive force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.

13 To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reason.

15 When not planning to use this unit for long periods of time (i.e., vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the Troubleshooting section on common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set the unit in standby mode, then disconnect the AC power plug from the wall outlet.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT

18 VOLTAGE SELECTOR (General model only)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110/120/ 220/240 V AC, 50/60 Hz.

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

The unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

CAUTION FOR CARRYING THE UNIT Before carrying the unit, first remove the disc from the unit, press STANDBY/ON to turn the unit off, then disconnect the AC power plug from the wall outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Blue: NEUTRAL Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described above.

Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

RX-E400 (U.S.A., Canada and General models) The nameplate is located on the bottom of the unit.

0102CRXE400(M).Cau.E 02.6.13, 7:16 PM2

1

E n

g lish

FEATURES

Minimum RMS output power per

channel 40 W + 40 W (6, 20 Hz to 20 kHz, 0.1% THD)

Full operation system remote control 40-station FM/AM preset tuning Multi-function RDS reception SUBWOOFER output terminal

S-bit DAC and 8fs digital filter Optical digital output Random, repeat, and program play CD TEXT display Copy time control CD-RW compatible

The receiver (RX-E400) and CD player (CDX-E400) are the main units of the YAMAHA Piano Craft Series. You can upgrade the system by adding the cassette deck (KX-E300) and MD recorder (MDX-E300)*. * MD recorder (MDX-E300) may not be available for some areas.

CONTENTS

SUPPLIED ACCESSORIES ....................... 2

CD PREVENTIVE CARE .......................... 2

GETTING STARTED Remote control .................................................... 3 Connecting the speakers and antennas ................ 4 Connecting the system......................................... 5 Setting the clock .................................................. 6 Adjusting the brightness of the display ............... 6

NAMES OF BUTTONS AND CONTROLS Front panel ........................................................... 7 Display................................................................. 7 Remote control .................................................... 8

BASIC OPERATIONS Listening to a source............................................ 9

TUNING Listening to the radio ......................................... 10 Presetting stations .............................................. 11

RECEIVING RDS STATIONS Receiving RDS data .......................................... 12 PTY SEEK mode............................................... 13 Optional settings for RDS functions ................. 14

USING THE BUILT-IN TIMER Before using the timer ....................................... 15 Timer play and recording .................................. 15 Sleep timer ......................................................... 16

NAMES OF BUTTONS AND CONTROLS Front panel ......................................................... 17 Display............................................................... 17 Remote control .................................................. 18

CD OPERATIONS Playing a disc ..................................................... 19 Selecting the time display and CD TEXT ......... 20 Random-sequence play...................................... 20 Repeat play ........................................................ 21 Program play ..................................................... 21

SYSTEM CONTROL Controlling other components ........................... 23 Before recording ................................................ 24 Dubbing setting ................................................. 24 Copy time control .............................................. 25

ADDITIONAL INFORMATION Troubleshooting ................................................. 26 Specifications .................................................... 28

0103CRXE400(M).01-02.E 02.6.13, 7:16 PM1

2

SUPPLIED ACCESSORIES

Remote control

AM loop antenna

Indoor FM antenna

Batteries (AA, R6, UM-3)

System control cable

Audio pin cable

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

After unpacking, check that the following parts are contained.

CD PREVENTIVE CARE

No!

Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center.

Do not try to clean the discs surface by using any type of disc cleaner, record spray, antistatic spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the discs surface.

Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc.

This compact disc player is designed for use with following types of disc only. Never attempt to load any other type of disc into the unit. The unit will also play 8-cm (3-inch) compact discs.

Be sure to use only CD-R and CD-RW discs made by reliable manufacturers.

Some discs cannot be played depending on the disc characteristics or recording conditions (copyright- protected in a particular way, etc.).

Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the discs play.

Do not use cleaning discs or warped discs. All of these could damage the unit.

To prevent a malfunction of this unit Do not use any non standard shaped CD (heart, etc.)

available on the market, because it may damage the unit.

Do not use a CD with tape, seals, or paste on it, because damage to the unit may result.

(Playback only)

0103CRXE400(M).01-02.E 02.6.13, 7:16 PM2

3

E n

g lish

Remote control This remote control controls a whole system: not only RX-E400 but also CDX-E400. Moreover, a cassette deck (KX-E300) and MD recorder (MDX-E300) that level up your system can be operated by it. Operating buttons for each unit are explained on the pages below:

Receiver, RX-E400: p.8 CD player, CDX-E400: p.18 Cassette deck, KX-E300: p.23 MD recorder, MDX-E300: p.23

Battery installation

1 Remove the battery compartment cover.

2 Insert batteries into the battery compartment.

3 Replace the battery compartment cover.

Battery replacement If you find that the remote control must be used closer to the main unit than usual, the batteries are weak. Replace batteries with new ones.

Notes Use only AA, R6, UM-3 batteries for replacement. Be sure the polarities are correct. (See the illustration inside

the battery compartment.) Remove the batteries if the remote control will not be used for

an extended period of time. If batteries leak, dispose of them immediately. Avoid touching

the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Remote control operation range

Notes There should be no large obstacles between the remote control

and the main unit. If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp, etc.), it might cause the remote control not to work correctly. In this case, reposition the main unit to avoid direct lighting.

Removing the protection sheet The remote control is shipped with a protection sheet to prevent the surface from being scratched during transportation. When removing the sheet, first put adhesive tape on an edge of the remote control so that the tape sticks to the sheet. Then peel the sheet off with the tape.

Note Do not scratch the remote control surface when peeling the

sheet off.

GETTING STARTED

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

30 30

2

1

3

Remote control sensor

Within approximately 6 m (20 feet)

PO W

ER

1

1 2

2 3

3

4

4 7

7 8

8 95

5 6

6

PO W

ER

1

1 2

2 3

3

4

4 7

7 8

8 95

5 6

6

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM3

4

Connecting the speakers and antennas

Never plug the AC power cord to the wall outlet until all connections are completed. Follow the steps as shown below to connect the system using the supplied cords and accessories. Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, + to + and to .

1 Connect the Speakers. 1 Unscrew the knob. 2 Remove approx. 10 mm (4) of insulation from

each of the speaker wires and insert the bare wire into the terminal.

3 Tighten the knob to secure the wire.

2 Connect the AM Antenna. Set up the AM loop antenna, then connect it.

3 Connect the FM Antenna.

4 Connect the AC power cord to a wall outlet.

Notes Use external FM/AM antennas if you need better reception.

Consult your dealer. The AM loop antenna should be placed apart from the main

unit. The antenna may be hung on a wall.

To connect the subwoofer (optional) You can reinforce the bass frequencies by adding a subwoofer (optional). Connect the SUBWOOFER OUT terminal of the unit to the INPUT terminal of the subwoofer.

1

3 FM antenna

2 AM loop antenna

Right speaker Left speaker

GETTING STARTED

Red: positive(+) Black: negative()

GND

AM ANT

FM ANT 75 UNBAL

1 2

3

FM ANT 75 UNBAL.

IN

IN

IN

IN

OUT

OUT

6 MIN./SPEAKER

SPEAKERS

SUBWOOFER OUT

SYSTEM CONNECTOR

GND

AM ANT

TAPE

CD

AUX

MD

R L

R L

+

A

B

E

C

D

4 To wall outlet

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM4

5

E n

g lish

Connecting the system

Connecting RX-E400 and CDX-E400 1 Connect to using the Audio pin cable.

Insert the plugs into the jacks of the same color.

2 Connect RX-E400 and CDX-E400 with the system control cable. The other SYSTEM CONNECTOR of CDX-E400 is for connecting MDX-E300 or KX-E300.

3 Connect the AC power plug of CDX-E400 to AC OUTLET of RX-E400. This connection allows you to control the power of the system through one-touch operation. It also reduces the standby power consumption of CDX-E400.

Adding KX-E300 and MDX-E300 to the above system (For details, refer to the owner's manual supplied with the respective component.)

1 Connect and of RX-E400 to and of KX-E300.

2 Connect and of RX-E400 to and of MDX-E300.

3 Connect an external component to the AUX terminal of RX-E400.

4 Connect DIGITAL OPTICAL OUT of CDX-E400 to DIGITAL OPTICAL IN of MDX-E300.

Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL IN jack before making digital connections. Be sure to replace the terminals cover when the terminal on the rear panel is not being used, in order to protect from dust.

Caution Never turn RX-E400 on until all connections between components have been completed. Never connect or disconnect the system control cable and/or power cord while the system components are turned on.

GETTING STARTED

To wall outlet

To RX-E400

Audio pin cable

FM ANT 75 UNBAL.

IN

IN

IN

IN

OUT

OUT

6 MIN./SPEAKER

SPEAKERS

SUBWOOFER OUT

SYSTEM CONNECTOR

GND

AM ANT

TAPE

CD

AUX

MD

R L

R L

+

A

B

E

C

D

DIGITAL OPTICAL

ANALOG OUT

SYSTEM CONNECTOR

E

R

L OUT

1 System control cable 2

3

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM5

6

GETTING STARTED

Setting the clock You must set the clock before you use the timer functions. The clock is based on a 24-hour system.

1 Turn on the power by pressing STANDBY/ON on the front panel, or POWER on the remote control.

2 While the power is on, press DISPLAY to display the time.

3 While holding TIME ADJ, press HOUR to set the hour. If you want to move the time in the reverse

direction, press HOUR while holding TIME ADJ and PRESET/BAND.

4 While holding TIME ADJ, press MIN to set the minutes. If you want to move the time in the reverse

direction, press MIN while holding TIME ADJ and PRESET/BAND.

To display the clock Press DISPLAY. The current time appears for about 8 seconds, then the normal display returns. Some buttons and controls may not work while the current time is displayed.

Note In the event of a power failure or when the AC power cord is

disconnected for more than five minutes, you must reset the clock.

Adjusting the brightness of the display

You can adjust the brightness of the display. If you have connected the CD player (CDX-E400), cassette deck (KX-E300), and/or MD recorder (MDX-E300) to this unit, the brightness of the displays is automatically adjusted to that of this unit.

Press and hold DISPLAY for about two seconds so that Dimmer 0 appears on the display. While holding DISPLAY, turn INPUT clockwise to increase or counterclockwise to decrease brightness.

Control Range: 0 to 6 (Preset value: 0)

HOURDISPLAY

PRESET/BANDTIME ADJ

MIN

INPUT

DISPLAY

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

STANDBY/ON

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM6

7

E n

g lish

Display

7 MEMORY indicator (P.11)

8 RDS indicator (P.12)

9 RDS mode indicators (P.12)

0 PTY HOLD indicator (P.13)

q TIMER indicator (P.15)

w SLEEP indicator (P.16)

1 STANDBY/ON (P.9)

2 TIMER indicator (P.15)

3 DISPLAY (P.15)

4 TIME ADJ/MEMORY (P.6/P.11)

5 AUTO/MANL/TIMER (P.10/P.15)

6 PRESET/BAND (P.10)

7 Display (P.7)

8 PRESET/TUNING / (P.10) HOUR/MIN (P.6/P.15)

1 Multi-information display

2 EDIT indicator

3 PRESET indicator (P.11)

4 STEREO indicator (P.10)

5 TUNED indicator (P.10)

6 AUTO indicator (P.10)

RX-E400 NAMES OF BUTTONS AND CONTROLS

9 VOLUME (P.9)

0 PHONES (P.9)

q Remote control sensor (P.3)

w BASS (P.9)

e TREBLE (P.9)

r BALANCE (P.9)

t INPUT (P.9)

Front panel

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

1 2 3 4 5 6 7 8 9

0 q w e r t

EDIT TIMER SLEEP

STEREO AUTO RDS PS RT CTPTY MEMORYTUNED PTY HOLD

PRESET

1 3 452 6 7 89 0 q w

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM7

8

Remote control

1 POWER (P.9)

2 Preset numbers (P.11)

3 FREQ/RDS (P.12)

4 PTY SEEK MODE (P.13/P.14)

5 PTY SEEK START (P.13/P.14)

6 A/B/C/D/E (P.11)

7 PRESET / (P.11)

8 TUNER (RX-E400) (P.11)

9 MD (MDX-E300) (P.23)

0 TAPE (KX-E300) (P.23)

q CD (CDX-E400) (P.19)

w AUX (The equipment connected to the AUX terminal) (P.5)

e SLEEP (P.16)

r DISPLAY (P.15)

t VOLUME %/ (P.9)

Note 8~w are operation buttons and input selectors for each

component.

RX-E400 NAMES OF BUTTONS AND CONTROLS

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

1

2

3 4 5

8

0 q

w

r

t

6

7 9

e

0104CRXE400(M).03-08.E 02.6.13, 7:16 PM8

E n

g lish

9

BASIC OPERATIONS

Listening to a source 1 Set the volume to MIN by turning VOLUME.

2 Turn on the power by pressing STANDBY/ON on the front panel, or POWER on the remote control.

Piano Craft series components that have correct system connections made to RX-E400 can be controlled to turn to the on or standby mode by RX-E400. However, once the connected components are turned to the standby mode with their respective STANDBY/ON button, they cannot be controlled by RX-E400 STANDBY/ ON button.

3 Select the desired input source by turning INPUT so that the source appears on the display.

When you operate the component connected to the AUX terminal, turn INPUT to select AUX.

4 Play the source. (Refer to the owners manual supplied with each selected component.)

5 Adjust the volume level by turning VOLUME on the front panel or pressing VOLUME %/ on the remote control.

6 If desired, adjust BASS, TREBLE, and BALANCE.

BASS: Turn this control clockwise to increase (or counterclockwise to decrease) the low frequency response.

TREBLE: Turn this control clockwise to increase (or counterclockwise to decrease) the high frequency response.

BALANCE: Adjust the balance of the output volume from the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions.

When you use headphones Connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through the headphones.

When you have finished using this unit Press STANDBY/ON on the front panel again or POWER on the remote control to set this unit to the standby mode.

Auto standby function This unit will be put automatically into the standby mode under the following conditions: A component connected with a system control cable is

selected as an input source. The component connected to this unit is in stop mode

and not operated for 30 minutes.

VOLUMESTANDBY/ON

INPUTBALANCE

TREBLE

BASSPHONES

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

POWER

VOLUME %/

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

0105CRXE400(M).09-09.E 02.6.13, 7:16 PM9

10

TUNING

Automatic tuning

1 Select TUNER by turning INPUT so that the frequency of a radio station appears in the display.

2 Press PRESET/BAND to select the reception band. Do not select the preset tuning mode (in which PRESET appears on the display).

3 Press AUTO/MANL so that AUTO appears in the display.

4 Press PRESET/TUNING (For a higher frequency) or (For a lower frequency).

5 The unit starts searching for a station.

When the unit finds a station, the unit stops searching and TUNED appears on the display.

6 If the located station is not the one you want, repeat steps 4 and 5 until a station you want is tuned.

Notes If automatic tuning search does not find the desired station, try

manual tuning as described next. When an FM stereo broadcast with sufficient signal strength is

received, STEREO appears on the display and you can listen to stereo sound.

Listening to the radio You can find radio stations automatically and manually.

Manual tuning

1 Follow steps 1 and 2 described in Automatic tuning.

2 Press AUTO/MANL so that AUTO disappears from the display.

3 Press PRESET/TUNING (For a higher frequency) or (For a lower frequency) to select your desired station. Each time you press PRESET/TUNING or ,

the frequency changes step by step.

STEREO AUTO

TUNED

PRESET/TUNING /

PRESET/BAND

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

INPUT

AUTO/MANL

0106CRXE400(M).10-11.E 02.6.13, 7:16 PM10

11

E n

g lish

TUNING E n

g lish

To preset stations manually

1 Tune in a desired station. (Refer to the previous page for the tuning procedure.)

2 Press MEMORY.

3 Within about 5 seconds, use PRESET/TUNING / to select a desired preset number. Continue

pressing PRESET/TUNING / to select the group of the preset stations (A, B, C, D, and E).

4 Press MEMORY. MEMORY, PRESET, and preset number will

appear on the display.

5 Repeat steps 1 to 4 until all desired stations are preset.

Notes A new setting can be preset in place of a previous one. The preset stations are retained for a week after you disconnect

the AC power cord or a power failure occurs.

Presetting stations The unit can preset station frequencies selected by Automatic tuning or Manual tuning. Up to 40 stations can be stored. With this function, you can select any desired station by pressing the corresponding preset station number.

To preset stations automatically

1 Select TUNER as input source by turning INPUT.

2 Press MEMORY for about 2 seconds. The unit starts presetting stations, AUTO and

MEMORY will flash on the display.

Received stations are stored to A1, A2...A8 sequentially. After 40 stations or all FM and AM stations are stored, the display will show the preset station A1.

To recall a preset station Press TUNER and select the desired number by pressing PRESET/BAND and PRESET/TUNING / on the front panel or PRESET / , A/B/C/D/E and 18 on the remote control.

The arrow will appear for a second when it is preset.

INPUTPRESET/BANDMEMORY 18

A/B/C/D/E

TUNER

PRESET /

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

PRESET/TUNING /

STEREO

TUNED MEMORY

PRESET

STEREO

TUNED MEMORY

PRESET

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

0106CRXE400(M).10-11.E 02.6.13, 7:16 PM11

12

Receiving RDS data RDS (Radio Data System) is a data transmission system by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various types of information, such as PS (Program Service), PTY (Program Type), RT (Radio Text), and CT (Clock Time).

1 Tune in the FM station. (Refer to page 10, or you can simply press TUNER on the remote control.)

2 Press FREQ/RDS to choose the mode. Each time you press FREQ/RDS, the type changes as follows:

FREQ/RDS

TUNER

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

PS The name of the RDS station being received is displayed. If the unit cannot find a station with PS data, the unit stops

searching and NO PS appears on the display.

PTY The type of the program on the RDS station now being received is displayed. You can make this unit search for a station which is broadcasting a program of a desired program type. (Refer to PTY program mode in the next section for details.)

RT Information about the program (such as the title of the song, name of the singer, etc.) on the RDS station being received is displayed by a maximum of 64 alphanumeric characters, including the umlaut symbol. If other characters are used in the RT data, they are displayed with an under-bar. If the unit cannot find a station with RT data, the unit stops

searching and NO RT appears on the display.

CT Current time is displayed. If the unit cannot find a station with CT data, the unit stops

searching and NO CT appears on the display.

Notes RDS may not work properly if the station you are tuned to is

not transmitting the RDS signal properly or if the signal strength is weak.

Some FM stations do not offer RDS service. Of those that do, not all provide the same types of services. The types provided by the received RDS station are dimmed on the display. Check with your local radio stations for details on RDS services in your area.

RDS PS

RDS PTY

RDS RT

RDS CT

RECEIVING RDS STATIONS

0107CRXE400(M).12-14.E 02.6.13, 7:16 PM12

13

Playing CDsGetting Started

E n

g lish

PTY SEEK mode You can locate a desired station by selecting a program type. The unit searches all preset stations into the type of programs currently being broadcast from the RDS stations.

To locate a station

1 Tune in the FM station. (Refer to page 10, or you can simply press TUNER on the remote control.)

2 Press PTY SEEK MODE once so that PTY and a PTY program flashes on the display.

3 Within about 20 seconds, press PRESET / repeatedly until the desired program type appears on the display.

4 Within about 20 seconds, press PTY SEEK START. If a station broadcasting the selected program type

is found, the unit stops searching and the Program Service name appears on the display. PTY HOLD appears on the display.

5 Repeat step 4 until the desired station is located.

If there is no station broadcasting the program type you select, NO PTY appears on the display, then the Program Service name or frequency appears on the display.

List of PTY (Program Type)

PTY SEEK MODE

PRESET /

PTY SEEK START

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

PTY

RDS PTY

PTY HOLD

PRESET

NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M.O.R. M

LIGHT M CLASSICS OTHER M

News Current Affairs General Information Sports Education Drama Culture Science Light Entertainment Pops Rock Middle of the Road Music (Easy-listening) Light Classics Serious Classics Other Music

RECEIVING RDS STATIONS

0107CRXE400(M).12-14.E 02.6.13, 7:16 PM13

14

Optional settings for RDS functions

The tuner has the following functions which make use of the RDS data service. These are originally in operation ON. However, you can turn these functions OFF, if so desired.

1 Select the FM band by pressing TUNER.

2 Press DISPLAY to display the current time.

3 Press FREQ/RDS.

4 Each time you press PTY SEEK MODE the display will change as follows:

1. CT = CLOCK (ON/OFF) The tuner corrects the time of the built-in clock automatically by synchronizing it with the CT data on the RDS station being received.

If you receive an RDS station of some other country, the built-in clock is synchronized with the time setting of the country.

If the built-in clock is not yet set for the current time or reset due to a power failure, etc., it will be set for the time of the CT data automatically, whether this setting is ON or OFF.

2. LOCAL = CT (ON/OFF) If the RDS station being received employs the local time (summer time, etc.) data service, its time is displayed in the CT mode.

3. A.M. = RDS (ON/OFF) RDS stations are searched instead of all FM stations by the automatic preset tuning operation when the setting is ON. (Refer to page 11.)

4. RT SPEED: 0 Changes the scrolling speed of the radio text decreasing the value and, in turn, reducing the speed.

Control Range: 0 to 3 (Preset value: 0)

5 Choose the function ON or OFF by pressing PTY SEEK START, confirming it in the display. Press PTY SEEK START repeatedly to change the value for RT SPEED. If there is no operation for about 20 seconds, this

mode is cancelled and turns into the frequency display. If the station has PS data, it turns into the PS mode.

6 Press FREQ/RDS again to restore the frequency display mode.

PTY SEEK MODE PTY SEEK STARTFREQ/RDS

TUNER

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

DISPLAY

RECEIVING RDS STATIONS

0107CRXE400(M).12-14.E 02.6.13, 7:16 PM14

15

E n

g lish

USING THE BUILT-IN TIMER

Timer play and recording By using the built-in timer, you can have the unit turn on at a specified time and begin playing or recording automatically. You can also specify the turn off time.

3. Timer REC Select the recording component by turning INPUT. If you like to enjoy timer play with TUNER or AUX, select REC Mode OFF.

4. ON Time ON Time appears on the display for a second, and changed to the time setting mode. Press HOUR to set the hour. Press MIN to set the minute.

5. OFF Time Set the time the same way as above. If you set the ON time but not OFF time, the timer play or recording will finish automatically after an hour.

Notes The display mode will change in about 8 seconds. If the

mode is changed before the setting is completed, call the mode again by pressing DISPLAY once or more.

If you select the input other than TUNER and AUX on 2. Timer Input, 3. Timer REC is skipped.

2 Press TIMER to complete the timer setting. The system is put in the standby mode. TIMER indicator lights up.

If you continue using the system, press STANDBY/ ON to turn on this unit.

To cancel the timer play setting Press DISPLAY to show the current time, then press TIMER so that TIMER goes off from the display. You can also cancel by pressing TIMER in standby mode.

Note In the event of a power failure or when the AC power cord is

disconnected for more than five minutes, you must reset the clock.

1 Press DISPLAY. Whenever DISPLAY is pressed, the display mode changes as follows:

1. Clock Time (TIMER on/off mode) If you have not set the clock yet Set Clock appears. You need to set the current time as described on page 6.

2. Timer Input Select the source to be played by turning INPUT. Timer recording is possible only when you

select TUNER or AUX.

MIN

INPUT

DISPLAY HOUR

TIMER

Before using the timer If you want to use the cassette deck, KX-E300 or the MD Recorder, MDX-E300 for timer play or recording, you must first make the connections as shown in Connecting the system on page 5. For details, refer to the instructions supplied with the MDX-E300 or KX-E300.

(Example)

BALANCE INPUT

VOLUME

L R

TREBLEBASS

PHONES

STANDBY/ON

TIMER DISPLAY MEMORY

NATURAL SOUND STEREO RECEIVER RXE400

AUTO/MAN'L PRESET/BAND

TIMER HOUR MIN

MIN MAXPRESET/TUNING

TIMER ADJ

+ +

USING THE BUILT-IN TIMER

0108CRXE400(M).15-16.E 02.6.13, 7:17 PM15

16

Sleep timer The unit can be turned off automatically at a selected SLEEP time.

1 Play the desired sound source.

2 Press SLEEP repeatedly until the desired sleep time appears in the display. Each time you press SLEEP, the sleep time changes as follows:

About 4 seconds after setting, the normal display will resume. SLEEP will appear in the display.

3 The unit will turn off automatically when the selected sleep time is reached.

SLEEP

SLEEP 2h00m

SLEEP 1h30m

SLEEP 1h00m

SLEEP 0h30m

SLEEP OFF

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

USING THE BUILT-IN TIMER

0108CRXE400(M).15-16.E 02.6.13, 7:17 PM16

17

CDX-E400 NAMES OF BUTTONS AND CONTROLS E n

g lish

Display

6 RANDOM indicator (P.20)

7 PROGRAM indicator (P.21)

8 REPEAT S/F (Single or Full) indicator (P.21)

9 CD-TEXT indicator (P.20)

Front panel

1 STANDBY/ON (P.19)

2 Disc tray (P.19)

3 (Open/Close) (P.19)

4 & (Stop) (P.19)

1 Multi-information Display

2 * Pause indicator

3 # Play indicator

4 A B Tape side indicator (P.25)

5 Music calendar

5 ^ (Play/Pause) (P.19)

6 Display (this page)

7 $/! (Skip/Search Backward)

/ (Skip/Search Forward) (P.19)

STANDBY/ON

NATURAL SOUND COMPACT DISC PLAYER CDXE400

/ /

2 3 4 51

76

F 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

SPACEPROGRAM RANDOMSREPEAT TITLEARTISTTRACK CDTEXT

A B

8 7 6 5 4

1 2 39

0109CRXE400(M).17-18.E 02.6.13, 7:17 PM17

18

CDX-E400 NAMES OF BUTTONS AND CONTROLS

Remote control

1 Numeric buttons (P.19) +100 button is used when operating

MDX-E300.

2 REP (Repeat) (P.21)

3 RANDOM (Random) (P.20)

4 PROG (Program) (P.21)

5 TEXT/TIME (P.20)

6 ^ (Play/Pause) (P.19)

7 & (Stop) (P.19)

8 $ ! (Skip/Seach Backward) (P.19)

9 (Skip/Seach Forward) (P.19)

0 CD input (P.19)

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

1

2 4

6

3

5

7 8 9

0

0109CRXE400(M).17-18.E 02.6.13, 7:17 PM18

19

E n

g lish

1 Turn on the power of RX-E400 and CDX-E400. (Refer to page 9.)

2 Press CD on the remote control in order to operate the CD player by the remote control.

Playing a disc 3 Press to open the disc tray, and place a CD on the tray.

4 Press ^ to start play. This unit starts play.

To pause play Press ^. To resume play, press ^ again.

To stop play Press &.

To eject the CD Press to open the disc tray, and remove the CD from the tray.

To play a specific track on the disc (Skip)

Direct play Select a desired track using the numeric button. (Example: To select 35, press +10 three times so that 3 appears in the display, then press 5.)

Skip play Press / to skip forward or $/! to skip backward. Press once for each track to be skipped.

Notes You cannot enter a number that is higher than the last track

number on the disc. These operations can also be performed when the unit is in the

pause or stop mode. During stop mode, if / or $/! is pressed, the

track number successively changes to higher numbers (or lower numbers).

To advance or reverse playback rapidly (Search) Press and hold / to advance playback rapidly, and $/! to reverse playback rapidly.

Note This unit cannot play a CD-R or CD-RW disc unless the disc is

finalized. Please make sure to finalize the disc on the CD recorder before playing on this unit.

^ &

^&

/$/!

$ !/

CD

Numeric buttons

STANDBY/ON

NATURAL SOUND COMPACT DISC PLAYER CDXE400

/ /

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

NATURAL SOUND COMPACT DISC PLAYER C DX-E400

STANDBY/ON

CD OPERATIONS

0110CRXE400(M).19-22.E 02.6.13, 7:17 PM19

20

CD OPERATIONS

Each time you press TEXT/TIME, the display changes as follows:

Note The disc title, artist names, or track names may not be

displayed with some CD TEXT discs. In this case, (NO ENTRY) appears on the display for about two seconds and then go back to the time display.

Press RANDOM. RANDOM appears on the display. The unit starts random sequence play.

To cancel random-sequence play mode Press & or RANDOM. RANDOM disappears from the display.

Notes This feature will not function during programming, or during

programmed play. If / is pressed during random-sequence play, the next

randomly programmed track will be played. If $/! is pressed, play will return to the beginning of the current track.

Total remaining time on the disc will not be displayed during random-sequence play.

Random-sequence play The unit can play all the tracks in a random sequence.

RANDOM

Selecting the time display and CD TEXT

You can select any of four time displays by pressing TEXT/TIME. When you play a CD with CD TEXT, the disc title, artist name, and track name are also displayed.

Elapsed time of the current track

Disc title

Artist name

Track name

CD-TEXT appears on the display if a CD has CD TEXT.

Total remaining time of the disc

Total disc play time

Remaining time of the current track

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D ETEXT/TIME

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

0110CRXE400(M).19-22.E 02.6.13, 7:17 PM20

21

E n

g lish

SINGLE REPEAT The current track is played repeatedly.

FULL REPEAT The current disc is played repeatedly. In random-sequence play mode, all randomly

sequenced tracks are played repeatedly in the same order.

To cancel repeat play mode Press REP successively until REPEAT S and REPEAT F disappear from the display. 1 Press & to stop the unit.

2 Press PROG. PROGRAM appears in the display.

3 Use the numeric buttons to select a track number until the desired track number appears on the display.

4 Repeat step 3 to program more tracks. You can select the same track again.

5 Press ^ to start program play.

Program play By creating a program, you can enjoy listening to your favourite tracks in any desired order. As many as 30 tracks can be programmed in sequence.

PROG

Repeat play You can play any desired track or disc repeatedly. Press REP to select the repeat mode.

REP

Numeric buttons

$ !/

^

&

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

PROGRAM

REPEAT S

REPEAT F

PROGRAM

CD OPERATIONS

0110CRXE400(M).19-22.E 02.6.13, 7:17 PM21

22

CD OPERATIONS

To stop program play mode Press &.

Note / or $/! can be used during program play to skip

to tracks within the program.

To check program data

1. Press & to stop program play.

2. Press PROG. Then each time you press / / $/!, the track number and the program number are displayed in the order of the program.

To change program data

1. Follow the preceding procedure described in To check program data.

2. Display the track number to be changed by pressing / / $/!.

3. Press the numeric button of the desired track. The previously programmed track will be cleared from memory and the new one will be programmed.

To delete all program data When program play is stopped, press &.

Note Turning the unit to the standby mode or opening the disc tray

also deletes the program data.

0110CRXE400(M).19-22.E 02.6.13, 7:17 PM22

23

E n

g lish

Controlling other components MDX-E300

1 Numeric buttons

2 REP (Repeat)

3 RANDOM

4 TEXT/TIME

5 PROG (Program)

6 ^ (Play/Pause)

7 (Skip/Search Forward)

8 $ ! (Skip/Search Backward)

9 & (Stop)

0 MD input

q MD REC/PAUSE

KX-E300

1 ^ (Play)

2 (Fast-foward)

3 $ ! (Rewind)

4 & (Stop)

5 TAPE input

6 TAPE REC/PAUSE

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

1

2 5

6,1

3

4

9,4 8,3 7,2

50

q 6

SYSTEM CONTROL

0111CRXE400(M).23-25.E 02.6.13, 7:17 PM23

24

SYSTEM CONTROL

Same as CD = TAPE

Recording automatically starts at the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.)

2 Press DUBBING START to start recording.

Note The displays 1~4 which include the component you have

not connected to your receiver (RX-E400) will be skipped.

To stop dubbing Press &.

Before recording When you record by using MDX-E300 or KX-E300, you must first make the connections as shown in Connecting the system on page 5. For details, refer to the instructions supplied with the MDX-E300 or KX-E300. A source from the component which is connected to the AUX terminal component can be recorded on a tape or MD.

Dubbing setting There are six different combinations of components. Once you choose a certain mode, recording starts and ends automatically in a certain way for each mode.

DUBBING START

DUBBING MODE

1

2

1 Decide the combination of the components. Each time you press DUBBING MODE, the mode will change in the below order.

Recording automatically starts from the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.)

When the recording on side A finishes while a track is being played back, the recording on side B starts from the beginning of the same track.

The sound is automatically faded out when it gets close to the end of side B.

3

4

Record unitPlay unit

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

Record unitPlay unit

0111CRXE400(M).23-25.E 02.6.13, 7:17 PM24

25

E n

g lish

1 Insert the desired disc into the CD player, and load a blank tape into the KX-E300.

2 Press R.TIME repeatedly to select the length of tape to be used. Each time you press R.TIME, the length of the tape changes as follows:

You can use numeric buttons to input the length of the tape.

3 Press PROG to start programming. A B appears in the display to indicate the

direction of the tape.

Copy time control By specifying the length of the tape, CDX-E400 programs tracks or helps you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. There are three ways of programming.

1 Manual tape programming

4 Select the desired track number using numeric buttons. Repeat step 4 to continue programming tracks. The remaining time is shown on the display. If the

track is longer than the remaining time, Error appears on the display.

5 Press R.TIME to continue programming tracks on side B. Repeat step 4.

6 Press PROG to confirm the program.

7 Choose CD = TAPE by pressing DUBBING MODE, and press DUBBING START to start recording.

2 Automatic tape programming

1 Repeat steps 1 and 2 of Manual tape programming.

2 Press REP to start programming. Programming is done in the order on the CD from

side A to side B. When complete, the programmed track number and total time are indicated in the display for 3 seconds.

3 Press PROG to confirm the program.

4 Choose CD = TAPE by pressing DUBBING MODE, and press DUBBING START to start recording.

3 Random tape programming

1 Repeat steps 1 and 2 of Manual tape programming.

2 Press RANDOM to start programming. Programming of CD tracks is done randomly from

side A to side B. When complete, the programmed track number and total time are indicated in the display for 3 seconds.

3 Press PROG to confirm the program.

4 Choose CD = TAPE by pressing DUBBING MODE, and press DUBBING START to start recording.

To stop dubbing Press & on CDX-E400 or & on KX-E300.

To cancel tape programming Press & on CDX-E400 when dubbing is stopped.

DUBBING START

DUBBING MODE

PROG

R.TIME

REP RANDOM

POWER

1 2 3

1 2 3 4 5 6

4 5 6 7 8 9

7 8 0 +10 +100

FREQ/RDS MODEPTY SEEKSTART REP RANDOM PROG

A B C TEXT/TIME R. TIME

D E

TAPE DIRECTION

PRESET TUNER PRESET

MD CD TAPE

AUX

MD REC/PAUSE

TAPE REC/PAUSE

MODE

SLEEP DISPLAY

DUBBING

VOLUME

START

90 60

46 54

SYSTEM CONTROL

0111CRXE400(M).23-25.E 02.6.13, 7:17 PM25

Troubleshooting If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. When taking the service, the MDX-E300 or KX-E300 may be needed. For details, contact your authorized YAMAHA dealer or service center.

The unit does not switch ON when the STANDBY/ON switch is pressed.

No sound from one speaker.

The sound suddenly goes off.

No sound from an external unit connected with this unit or play does not begin.

Sound distorted.

SYMPTOM CAUSE REMEDY

R X

-E 40

0 R

E C

E IV

E R

Securely connect the power cord.

Connect properly.

Check the speaker wires are not touching each other and then turn the unit back on.

Connect the cords properly. If the problem persists, the cords may be defective.

Make a proper input source selection.

Connect the AC power cord of the component to an AC outlet.

The AC power cord is not connected or not completely connected.

Loose speaker connections.

The protection circuit has been activated because of a short circuit, etc.

Incorrect cord connections.

Input source selection is not proper.

The component connected to this unit is disconnected from AC outlet.

ADDITIONAL INFORMATION

Excessive static in FM broadcasts.

Noise increases during stereo broadcasts.

Stereo broadcasts are noisy and STEREO indicator blinks on and off.

Cannot select preset stations.

Buzzing or static during AM broadcasts.

AM broadcast sensitivity is poor.

Cannot set timer.

The unit does not work normally.

Interference from starting motor of a nearby car.

Interference from the thermostat of a nearby electrical appliance.

Antenna input is too weak due to obstructions or excessive distance from the broadcasting station.

Insufficient antenna input.

Preset memory has been erased.

Interference from sources such as lightning, fluorescent lights, electric motors or thermostat of nearby electrical appliance.

TV or microprocessor is being used nearby.

Radio signal is weak or the antenna is not properly connected.

Current time is not set.

The internal microcomputer has been frozen by an external electric shock (lightning, excessive static electricity, etc.) or the power supply with low voltage.

Position the FM antenna as high and as far away from nearby roads as possible. Connect using a coaxial cable.

Check the antenna connection.

Install a multi-element type FM antenna if possible.

Install an antenna appropriate for the electric field strength of your area.

Reprogram memory presets.

The problem is difficult to eliminate, but can be lessened by grounding AM loop antenna.

Move away from TV or microprocessor.

Properly connect the AM loop antenna.

Change orientation of the AM loop antenna.

Install an external AM loop antenna.

Set current time.

Unplug the AC power cord from the wall outlet, and then plug in again after about one minute.

26

0112CRXE400(M).26-29.E 02.6.13, 7:17 PM26

SYMPTOM CAUSE REMEDY

Play does not begin.

Play is delayed, or begins at the wrong place.

CD synchronized recording or Automatic recording function does not work.

Sound skips.

Sound hums.

Noise from inside of the unit.

The remote control does not work.

TV functions strangely when the remote control is being used.

Check the disc carefully; replace it if necessary.

Wait 20 to 30 minutes after switching the unit ON before trying to play a disc.

Reload the disc with the label side facing up.

Clean the disc.

Check the disc carefully; replace it if necessary.

Connect the system cable properly.

Relocate the unit.

Clean the disc.

Securely connect the audio cables. If the problem persists, the cables may be defective.

Replace the disc.

Replace the batteries with new ones.

Use within 6 meters and 60 degree radius.

Change the position of the unit.

Relocate this unit away from the TV or cover the TVs remote control sensor.

The disc is damaged.

There is moisture on the laser pick-up.

The disc has been loaded upside down.

The disc is dirty.

The disc may be scratched or damaged.

The system cable is not connected securely.

The unit is being subjected to vibrations or impacts.

The disc is dirty.

Improper cable connections.

The disc may be warped.

The batteries of the remote control are too weak.

Remote control is too far away or is being used at an incorrect angle.

Direct sunlight or lighting (of an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of the unit.

Remote control is being used near TV set with a remote control sensor.

R E

M O

T E

C O

N T

R O

L C

D X

-E 40

0 C

D P

L A

Y E

R

27

ADDITIONAL INFORMATION E n

g lish

0112CRXE400(M).26-29.E 02.6.13, 7:17 PM27

Specifications

Amplifier section Minimum RMS output power per channel

................................................ 55 W + 55 W (6 1kHz 0.1% THD)

.............................. 40 W + 40 W (6 20 Hz to 20 kHz 0.1% THD) DIN Standard output power per channel (Europe model)

................................................ 60 W + 60 W (4 1kHz 0.7% THD) Input sensitivity/Impedance

CD/TAPE/MD/AUX ................................................. 150 mV/47 k Frequency response

CD etc. ..................................................... 20 Hz to 20 kHz, 0.5 dB Total Harmonic Distortion (20 Hz to 20 kHz)

CD etc. 20 W, 6 ................................................................... 0.04% Signal-to-Noise ratio (IHF-A Network)

CD etc. (250 mV, Input shorted) ............................................. 98 dB Output level/Impedance

PHONES ..................................................................... 0.43 V/330

Tuner section Tuning range FM

[U.S.A. and Canada models] ................................ 87.5 107.9 MHz [U.K., Europe, Australia and General models] .......................................................................... 87.50 108.00 MHz

AM [U.S.A. and Canada models] ................................... 530 1710 kHz [U.K., Europe and Australia models] ...................... 531 1611 kHz [General model] ....................................... 530/531 1710/1611 kHz

Sensitivity FM (S/N 30dB) ....................................................................... 1.0 V AM .................................................................................... 300 V/m

General Power supply

[U.S.A. and Canada models] ................................. AC 120 V, 60 Hz [Australia model] ................................................... AC 240 V, 50 Hz [U.K. and Europe models] ..................................... AC 230 V, 50 Hz [General model] .......................... AC 110/120/220/240 V, 50/60 Hz

Power consumption [U.S.A. and Canada models] .................................................. 110 W [U.K., Europe, Australia and General models] ...................... 125 W

Power consumption (standby mode) [U.S.A. and Canada models] ................................................... 0.7 W [U.K., Europe and Australia models] ...................................... 0.8 W Dimensions (W x H x D) .................................. 217 x 108 x 372 mm Weight ..................................................................................... 5.4 kg

CD player section D/A converter ...................................................................... S-bit DAC Frequency response ...................................... 2 Hz to 20 kHz, 0.5 dB S/N ratio ................................................................................... 102 dB

Laser diode properties Material: GaAIAs Wavelength: 780 nm Emission duration: continuous Laser output: max. 44.6 W*

* This output is the value measured at a distance of about 200 mm from the objective lens surface on the Optical Pick-up Block.

General Power supply

[U.K. and Europe models] ..................................... AC 230 V, 50 Hz [General model] .......................... AC 110/120/220/240 V, 50/60 Hz

Power consumption ..................................................................... 10 W Power consumption (standby mode) ......................................... 4.0 W Dimensions (W x H x D) ..................................... 217 x 108 x 346 mm Weight ........................................................................................ 3.0 kg

Specifications are subject to change without notice.

ADDITIONAL INFORMATION

28

0112CRXE400(M).26-29.E 02.6.13, 7:17 PM28

VARO! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASERSTEILYLLE. L KATSO STEESEEN.

VARNING! OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN.

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

ATTENTION Lemploi de commandes, de rglages ou un choix de procdures diffrents des spcifications de cette brochure peut entraner une exposition dventuelles radiations pouvant tre dangereses.

ACHTUNG Die Verwendung von Bedienungselementen oder Einstellungen oder die Durchfhrung von Bedienungsvorgngen, die nicht in dieser Anleitung aufgefhrt sind, kann zu einem Kontakt mit gefhrlichen Laserstrahlen fhren.

OBSERVERA Anvndning av kontroller och justeringar eller genomfrande av procedurer andra n de som specificeras i denna bok kan resultera i att du utstter dig fr farlig strlning.

ATTENZIONE Uso di controlli o regolazioni o procedure non specificamente descritte pu causare lesposizione a radiazioni di livello pericoloso.

PRECAUCIN El uso de los controles o los procedimientos de ajuste o utilizacin diferentes de los especificados en este manual pueden causar una exposicin peligrosa a la radiacin.

VOORZICHTIG Gebruik van bedieningsorganen of instellingen, of uitvoeren van handelingen anders dan staan beschreven in deze handleiding kunnen leiden tot blootstelling aan gevaarlijke stralen.

On the rear panel

CDX-E400

0801CRXE400(M).H3 02.6.13, 7:26 PM1

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VSTRA FRLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia V922180

CRX-E400

OWNERS MANUAL MODE DEMPLO

Manualsnet FAQs

If you want to find out how the CDX-E400 Yamaha works, you can view and download the Yamaha CDX-E400 Receiver Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha CDX-E400 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha CDX-E400. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha CDX-E400 Receiver Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha CDX-E400 Receiver Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha CDX-E400 Receiver Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha CDX-E400 Receiver Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha CDX-E400 Receiver Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.