Yamaha Clavinova CVP-501 Piano Upgrade Manual PDF

1 of 2
1 of 2

Summary of Content for Yamaha Clavinova CVP-501 Piano Upgrade Manual PDF

1

Version 1.10 Upgrade Manual Version 1.10 of the Clavinova rmware adds the following functionality to CVP-501, CVP-503, CVP-505, and CVP-509 models. Support for the Wi-Fi Protected Access (WPA) wireless encryption standard (with the exception of certain

USB-LAN adaptors*1) Support for the Wi-Fi Protected Setup (WPS)*2 standard, which makes it easier to setup wireless home

networks (with the exception of certain USB-LAN adaptors*1) Support for the following USB-LAN adaptors.

Wireless: Buffalo WLI-UC-GN Buffalo WLI-UC-GNHP Planex GW-USMicroN Planex GW-USMini2N Edimax EW-7711UAn Edimax EW-7711UTn Hawking HWUN3 Tenda W311U Belkin F6D4050 LogiLink WL0049A LogiLink WL0054

Wired: LINKSYS USB300M AIRLINK101 ASOHOUSB 10/100Mbps Fast Ethernet USB 2.0 Adapter macally AIR2NET INTELLINET Hi-Speed USB 2.0 to Fast Ethernet Adapter

*1: For more details, please visit the Yamaha Piano / Keyboard website (below) and refer to the list of USB devices conrmed as working with our products. http://music.yamaha.com/download

*2: For more details, please refer to the Internet Connection Guide, which can be downloaded from the Yamaha Manual Library website. http://www.yamaha.co.jp/manual/english/

1. Turn on the Clavinova. This can be done by pressing the Power switch located at the right of the front panel.

2. Conrm the instruments current rmware version as follows.

2-1 Press the [FUNCTION] button.

2-2 Press the [J] (UTILITY) button.

2-3 Using the TAB [E] / [F] buttons, select the OWNER tab and display the Owner setting screen.

2-4 Press the [7] (VERSION) button to display the current rmware version. If the displayed version number is less than 1.10, the rmware should be upgraded.

2-5 Press the [8] (EXIT) button or the [EXIT] button to close the window.

3. Turn off the Clavinova. This can be done by pressing the Power switch located at the right of the front panel.

To upgrade the Clavinova rmware, place the upgrade data on a USB ash memory device and then carry out the upgrading procedure as described below.

1. Plug the USB ash memory device containing the upgrade data into the Clavinova.

2. Hold down the [START/STOP] button and press the Power switch

Continue to hold down the [START/STOP] button until the following message is displayed.

3. Install the upgrade data. To do so, release the [START/STOP] button and then press it once again.

Conrming the Current Version

Upgrading the Firmware

CVP-509/505/503/501

2

After indicating that data is being loaded, the Clavinova will begin to install the new version of the rmware. The following message is displayed at this time. Upgrading of the rmware takes approximately 5 minutes.

The USB ash memory device must not be unplugged and the instrument must not be turned off while the rmware is being installed. Failure to observe this precaution may render the Clavinova unt for use.

The following message is displayed upon completion of the rmware installation process.

4. Turn off the Clavinova and unplug the USB ash memory device.

After any rmware upgrade, it is recommended that you conrm the current version once again as described below.

1. Turn on the Clavinova. This can be done by pressing the Power switch located at the right of the front panel.

2. Conrm the instruments current rmware version as follows.

2-1 Press the [FUNCTION] button.

2-2 Press the [J] (UTILITY) button.

2-3 Using the TAB [E] / [F] buttons, select the OWNER tab and display the Owner setting screen.

2-4 Press the [7] (VERSION) button to display the current rmware version.

If the upgrade process has been completed successfully, version 1.10 will be shown in the window displayed. If the version has not changed, it is likely that the installation procedure was not completed successfully. In such a case, repeat the procedure carefully as described herein.

3. Press the [8] (EXIT) button or the [EXIT] button to close the window.

Deletion using the instrument: Version 1.10 of the rmware for Clavinova CVP-501, CVP-503, CVP-505, and CVP-509 models makes it possible to delete upgrade data from a USB ash memory device using the instrument itself. To do so, proceed as follows.

1. Plug the USB ash memory device containing the upgrade data into the Clavinova.

2. Hold down the [START/STOP] button and press the Power switch.

Continue to hold down the [START/STOP] button until the following message is displayed.

The USB ash memory device must not be unplugged and the instrument must not be turned off at this time. Failure to observe this precaution may render the Clavinova unt for use.

3. Press the [BREAK] button to delete the upgrade data.

The following conrmation message will be displayed.

4. To delete the upgrade data, release the [START/ STOP] button and then press it once again. The Clavinova will begin deleting the upgrade data. The following message is displayed at this time.

The USB ash memory device must not be unplugged and the instrument must not be turned off while the upgrade data is being deleted. Failure to observe this precaution may result in the USB ash memory device being perman

Manualsnet FAQs

If you want to find out how the Clavinova Yamaha works, you can view and download the Yamaha Clavinova CVP-501 Piano Upgrade Manual on the Manualsnet website.

Yes, we have the Upgrade Manual for Yamaha Clavinova as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Upgrade Manual should include all the details that are needed to use a Yamaha Clavinova. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha Clavinova CVP-501 Piano Upgrade Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha Clavinova CVP-501 Piano Upgrade Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha Clavinova CVP-501 Piano Upgrade Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha Clavinova CVP-501 Piano Upgrade Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha Clavinova CVP-501 Piano Upgrade Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.