Contents

Yamaha Clavinova CLP-115 Piano Owner's Manual PDF

1 of 46
1 of 46

Summary of Content for Yamaha Clavinova CLP-115 Piano Owner's Manual PDF

Clavinova Web site (English only) http://www.yamahaclavinova.com/ Yamaha Manual Library http://www2.yamaha.co.jp/manual/english/

DIC 244

Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones Before using the Clavinova, be sure to read PRECAUTIONS on pages 6-7. Achten Sie darauf, vor Einsatz des Clavinova die VORSICHTSMASSNAHMEN auf Seite 6-7 durchzulesen. Avant d'utiliser le Clavinova, lire attentivement la section PRECAUTIONS D'USAGE aux pages 6- 7. Antes de utilizar el Clavinova, lea las PRECAUCIONES que debe tener en cuenta en las pginas 6- 7.

IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.

WICHTIG berprfung der Stromversorgung Vergewissern Sie sich vor dem Anschlieen an das Stromnetz, da die rtliche Netzspannung den Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswhler an der Unterseite neben der Netzkabeldurchfhrung ausgestattet. Falls vorhanden, mu der Spannungswhler auf die rtliche Netzspannung eingestellt werden. Der Spannungswhler wurde werkseitig auf 240 V voreingestellt. Zum Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher, bis der Zeiger auf den korrekten Spannungswert weist.

IMPORTANT Contrler la source d'alimentation Vrifiez que la tension spcifie sur le panneau infrieur correspond la tension du secteur. Dans certaines rgions, l'instrument peut tre quip d'un slecteur de tension situ sur le panneau infrieur du clavier proximit du cordon d'alimentation. Vrifiez que ce slecteur est bien rgl en fonction de la tension secteur de votre rgion. Le slecteur de tension est rgl sur 240 V au dpart d'usine. Pour modifier ce rglage, utilisez un tournevis lame plate pour tourner le slecteur afin de mettre l'indication correspondant la tension de votre rgion vis vis du repre triangulaire situ sur le panneau.

IMPORTANTE Verifique la alimentacin de corriente Asegrese de que tensin de alimentacin de CA de su rea corresponde con la tensin especificada en la placa de caractersticas del panel inferior. En algunas zonas puede haberse incorporado un selector de tensin en el panel inferior de la unidad del teclado principal, cerca del cable de alimentacin. Asegrese de que el selector de tensin est ajustado a la tensin de su rea. El selector de tensin se ajusta a 240V cuando la unidad sale de fbrica. Para cambiar el ajuste, emplee un destornillador de cabeza "recta" para girar el selector de modo que aparezca la tensin correcta al lado del indicador del panel.

M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation C 2003 Yamaha Corporation

WB29560 30?AP???.?-01A0 Printed in Indonesia

CLP-115

C LP-115

Introduction

92-469 1

(bottom)

SPECIAL MESSAGE SECTION

PRODUCT SAFETY MARKINGS:

Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section.

See bottom of Keyboard enclosure for graphic symbol markings.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servic- ing) instructions in the literature accompanying the product.

The lightning ash with arrowhead symbol, within the equilateral trian- gle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclo- sure that may be of sufcient magni- tude to constitute a risk of electrical shock.

IMPORTANT NOTICE:

All Yamaha electronic products are tested and approved by an independent safety testing laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner, all foreseeable risks have been eliminated. DO NOT modify this unit or commission others to do so unless specically authorized by Yamaha. Product perfor- mance and/or safety standards may be diminished. Claims led under the expressed warranty may be denied if the unit is/has been modied. Implied warranties may also be affected.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specications without notice or obligation to update existing units.

ENVIRONMENTAL ISSUES:

Yamaha strives to pro- duce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non- rechargable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately ve years. When replacement becomes necessary, contact a qualied service representative to perform the replacement.

Warning:

Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by applicable laws. Note: In some areas, the servicer is required by law to return the defective parts. However, you do have the option of having the servicer dispose of these parts for you.

Disposal Notice:

Should this product become damaged beyond repair, or for some reason its useful life is consid- ered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc.

NOTICE:

Service charges incurred due to lack of knowl- edge relating to how a function or effect works (when the unit is operating as designed) are not covered by the man- ufacturers warranty, and are therefore the owners respon- sibility. Please study this manual carefully and consult your dealer before requesting service.

NAME PLATE LOCATION:

The graphic below indi- cates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase.

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Model

Serial No.

Purchase Date

CLP-115

About this Owners Manual

EN G

LI SH

3

Thank you for purchasing the Yamaha Clavinova! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the CLP-115. We also recommend that you keep this manual in a safe and handy place for future reference.

About this Owners Manual

This manual consists of three main sections: Introduction, Reference and Appendix.

Introduction (page 2):

Please read this section rst.

Reference (page 13):

This section explains how to make detailed settings for the CLP-115s various functions.

Appendix (page 33):

This section introduces reference material.

* The model CLP-115 will be referred to as the CLP/Clavinova in this Owners Manual. * The illustrations of the controls in this owners manual are for instructional purposes only and actual appearance of

the controls may be somewhat different on your instrument.

Trademarks:

Apple and Macintosh are trademarks of Apple Computer, Inc. Windows is a registered trademark of Microsoft Corporation. All other trademarks are the property of their respective holders.

COPYRIGHT NOTICE

This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others copyrights. Such copyrighted materials include, without limitation, all computer software, MIDI les and WAVE data. Any unauthorized use of such programs and contents outside of per- sonal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DONT MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

The Clavinova-Computer Connection,

is a supplementary guidebook that describes, for beginners, what you can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is not written for a specic model). The document is available as a PDF le (in English) at the following Internet address:

Clavinova Web site (English only):

http://www.yamahaclavinova.com/

Yamaha Manual Library:

http://www2.yamaha.co.jp/manual/english/

CLP-115

Table of Contents

EN G

LI SH

4

Table of Contents

Introduction

Application Index........................................ 5

PRECAUTIONS............................................. 6

Accessories .................................................. 8

Maintenance ............................................... 8

Features....................................................... 9

Before Using the CLP-115......................... 10

Key Cover ...........................................................10 Music Rest ..........................................................10 Turning the Power On.......................................11 Setting the Volume.............................................11 Using Headphones .............................................12

Reference

Panel Controls and Terminals................... 14

Listening to the Demo Songs ................... 15

Listening to 50 Piano Preset Songs .......... 16

Selecting & Playing Voices........................ 17

Selecting Voices ..................................................17 Using the Pedals .................................................17 Adding Variations to the Sound Reverb ........18 Combining Two Voices (Dual mode)...............19 Transposition .....................................................20 Fine-tuning the Pitch .........................................20 Using the Metronome........................................21

About MIDI ............................................... 23

Connecting a Personal Computer ............ 24

MIDI Functions.......................................... 26

MIDI Transmit/Receive Channel Selection......26 Local Control ON/OFF......................................26 Program Change ON/OFF.................................27 Control Change ON/OFF ..................................27

Troubleshooting ....................................... 28

Options...................................................... 28

Keyboard Stand Assembly ........................ 29

Index ......................................................... 32

Appendix

MIDI Data Format / MIDI-Datenformat / Format des donnes MIDI / Formato de datos MIDI ..........................34

MIDI Implementation Chart .....................38

Specifications / Technische Daten / Caractristiques techniques / Especificaciones ......................................39

CLP-115

Application Index

EN G

LI SH

5

Application Index

Use this index to nd reference pages that may be helpful for your particular application and situation.

Listening

Listening to demo songs with different voices...................................................... Listening to the Demo Songs on page 15

Listening to songs from 50 Greats for the Piano ...................................... Listening to 50 Piano Preset Songs on page 16

Playing

Using three pedals ....................................................................................................................... Using the Pedals on page 17

Playing an accompaniment that matches pitch ............................................................................. Transposition on page 20

Fine-tuning the pitch of the entire instrument when you play the CLP-115 along with other instruments or CD music.......................................................................Fine-tuning the Pitch on page 20

Changing voices

Viewing the list of voices............................................................................................................. Selecting Voices on page 17

Simulating a concert hall .................................................................... Adding Variations to the Sound Reverb on page 18

Combining two voices............................................................................... Combining Two Voices (Dual mode) on page 19

Practicing

Practicing with an accurate and steady tempo .................................................................Using the Metronome on page 21

Connecting the CLP-115 to other devices

What is MIDI? ....................................................................................................................................About MIDI on page 23

Connecting the computer ...............................................................................Connecting a Personal Computer on page 24

Assembling

Assembling and disassembling the CLP-115 ......................................................Keyboard Stand Assembly on pages 2931

C

EN G

LI SH

6

(1)B-7 1/2

PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited to, the following:

Only use the voltage specied as correct for the instrument. The required voltage is printed on the name plate of the instrument.

Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.

Use only the supplied power cord/plug. Do not place the power cord near heat sources such as heaters

or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.

Do not open the instrument or attempt to disassemble the inter- nal parts or modify them in any way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualied Yamaha service personnel.

Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liq- uids which might spill into any openings.

Never insert or remove an electric plug with wet hands.

Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a re.

If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the instrument inspected by qual- ied Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:

When removing the electric plug from the instrument or an out- let, always hold the plug itself and not the cord. Pulling by the cord can damage it.

Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms.

Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.

Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury.

Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel dis- guration or damage to the internal components.

Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.

Do not place the instrument in an unstable position where it might accidentally fall over.

Before moving the instrument, remove all connected cables. Do not place the instrument against a wall (allow at least 3 cm/

one-inch from the wall), since this can cause inadequate air cir- culation, and possibly result in the instrument overheating.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Assembly

Location

LP-115 PRECAUTIONS

EN G

LI SH

Before connecting the instrument to other electronic compo- nents, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to mini- mum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level.

When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use paint thinners, solvents, cleaning uids, or chemical-impregnated wiping cloths.

Take care that the key cover does not pinch your ngers, and do not insert a nger or hand in any gaps on the key cover or instrument.

Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualied Yamaha service personnel.

Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

Do not rest your weight on, or place heavy objects on the instru- ment, and do not use excessive force on the buttons, switches or connectors.

Do not operate the instrument for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.

Do not place the bench in an unstable position where it might accidentally fall over.

Do not play carelessly with or stand on the bench. Using it as a tool or step-ladder or for any other purpose might result in acci- dent or injury.

Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury.

If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool.

Always turn the power off when the instrument is not in use.

Connections

Maintenance

Handling caution

Using the bench (If included)

Yamaha cannot be held responsible for damage caused by improper use or modications to the instrument, or data that is lost or destroyed.

(1)B-7 2/2

CLP-115 PRECAUTIONS 7

C

EN G

LI SH

8

Accessories 50 Greats for the Piano (Music Book)

Owners Manual This manual contains complete instructions for operating your CLP-115.

Quick Operation Guide

Bench A bench may be included or optional, depending on your locale.

Maintenance Clean the instrument using a dry or slightly damp soft cloth (wring well).

CAUTION Do not use benzene, thinner, detergent, or chemically-treated cloth for cleaning. Do not place vinyl, plastic or rubber products on the instrument. Otherwise, the panel or keys may become discolored or degraded.

CAUTION Before using the CLP-115, be sure to read PRECAUTIONS on pages 6 7.

Tuning Unlike an acoustic piano, the CLP-115 does not need to be tuned. It always stays perfectly in tune.

Transporting If you move to another location, you can transport the CLP-115 along with your other belongings. You can move the unit as it is (assembled) or you can disassemble the unit before moving. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock.

LP-115 Accessories / Maintenance

EN G

LI SH

Features The Yamaha Clavinova CLP-115 digital piano offers unmatched sonic realism and natural grand-piano type playability as well as Yamahas original AWM Stereo Sampling tone-generation technology for rich, musical voices, and a special Graded Hammer keyboard that provides graded key weight and response throughout the keyboard range. The Grand Piano 1 and 2 voices feature samples painstakingly recorded from a full concert grand piano. The E. Piano 1 voice features a single velocity-switched sample (Dynamic Sampling) and E. Piano 2 voice features two velocity-switched sample. The CLP-115 sounds much closer to a true acoustic piano.

MASTER VOLUME

DEMO

METRONOME

VOICE

MIN MAX

MIDI

INOUTTHRU

MASTER VOLUME

DEMO

METRONOME

VOICE

MIN MAX

POWER

PHONES

PEDAL

MIDI [IN/OUT/THRU] Connect a MIDI device to this connector to use various MIDI functions (pages 2425). (About MIDIpage 23)

[PEDAL] Connect the pedal cord here to use the CLP-115s pedals (page 30).

[MASTER VOLUME] Adjust the volume level using this control (page 11).

[DEMO] Playback of a demo song and 50 preset songs is available (page 15).

[METRONOME] Control the metronome functions (page 21).

[VOICE] Select voices from 10 internal sounds, including Grand Piano 1 and 2 (page 17). You can also combine two voices simultaneously (page 19), select various reverb effects (page 18), etc.

[PHONES] A set of standard stereo headphones can be plugged in here for private practice (page 12).

CLP-115 Features 9

C

EN G

LI SH

10

Before Using the CLP-115

Key Cover To open the key cover:

Lift the cover slightly, then push and slide it open.

To close the key cover: Slide the cover toward you and gently lower the cover over the keys.

CAUTION Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be care- ful to avoid catching ngers (yours or others, especially childrens) between the cover and main unit.

CAUTION Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, re or other serious damage to the instrument.

Music Rest To raise the music rest: 1. Pull the music rest up and toward yourself as far as it will go. 2. Flip down the two metal supports at the left and right on

the rear of the music rest. 3. Lower the music rest so that it rests on the metal sup-

ports.

To lower the music rest: 1. Pull the music rest toward yourself as far as it will go. 2. Raise the two metal supports (at the rear of the music rest). 3. Gently lower the music rest backward until it is all the

way down.

CAUTION Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from the music rest until it is all the way down.

Be careful to avoid catching your fingers when opening or closing the cover.

CAUTION

LP-115 Before Using the CLP-115

EN G

LI SH

Turning the Power On 1. Connect the power cord.

Insert the plugs at the ends of the cord: one into the AC INLET on the CLP-115, and the other into a standard AC out- let. In some areas, a plug adaptor may be provided to match the pin conguration of AC wall outlets in your area.

(The shape of the plug differs depending on locale.)

2. Turn the power on. Press the [POWER] button. The power indicator located below the left end of the keyboard lights up.

When youre ready to turn off the power, press the [POWER] button again. The power indicator turns off.

Setting the Volume When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.

CAUTION Do not use the CLP-115 at a high volume level for a long period of time, or your hearing may be damaged.

TIP Power indicator If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is still on.

1 2

(bottom surface)

Power indicator

[POWER]

MASTREVOLUME

DEMO

METRONOME

VOICE

MIN MAX

TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound

TIP You can also adjust the [PHONES] output level using the [MASTER VOLUME] control.

MASTER VOLUME

MIN MAX

The level decreases. The level increases.

CLP-115 Before Using the CLP-115 11

C

EN G

LI SH

12

Using Headphones Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.)

Using the Headphone Hanger A headphone hanger is included in the CLP-115 package so that you can hang the headphones on the CLP-115. Install the headphone hanger using the included two screws (4 10mm) as shown in the gure.

CAUTION Do not hang anything other than the headphones on the hanger. Otherwise, the CLP-115 or the hanger may be damaged.

PHONES

MASTREVOLUME

DEMO

METRONOME

VOICE

MIN MAX

standard stereo phone plug

bottom surface

PHONES

LP-115 Before Using the CLP-115

EN G

LI SH

Reference Panel Controls and Terminals ................................. 14

Listening to the Demo Songs................................... 15

Listening to 50 Piano Preset Songs.......................... 16

Selecting & Playing Voices ....................................... 17 Selecting Voices ........................................................... 17 Using the Pedals .......................................................... 17 Adding Variations to the Sound Reverb.................. 18 Combining Two Voices (Dual mode)......................... 19 Transposition............................................................... 20 Fine-tuning the Pitch .................................................. 20 Using the Metronome................................................. 21

About MIDI.............................................................. 23

Connecting a Personal Computer ........................... 24

MIDI Functions........................................................ 26 MIDI Transmit/Receive Channel Selection ............... 26 Local Control ON/OFF............................................... 26 Program Change ON/OFF ......................................... 27 Control Change ON/OFF ........................................... 27

Troubleshooting ....................................................... 28

Options ..................................................................... 28

Keyboard Stand Assembly........................................ 29

Index ......................................................................... 32

This section explains how to make detailed settings for the CLP-115s various functions.

CLP-115 13

C

EN G

LI SH

14

Panel Controls and Terminals Top panel

MASTER VOLUME

DEMO

METRONOME

VOICE

MIN MAX

POWER

MIDI

INOUTTHRU

PHONES

MASTER VOLUME

DEMO

METRONOME

VOICE

MIN MAX

C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7B-1A-1

PEDAL

8

1

9 0

A

2

6

7

3

4

5

1 [POWER] ....................................... P11 2 [MASTER VOLUME] ....................... P11 3 [DEMO] ...................................P1516 4 [METRONOME]........................P2122 5 [VOICE]....................................P1719 6 [PHONES] ..................................... P12 7 MIDI [IN] [OUT] [THRU]................ P23

8 [PEDAL]......................................... P30 9 Soft (Left) Pedal ............................ P18 0 Sostenute (Center) Pedal............... P18

A Damper (Right) Pedal ................... P17

LP-115 Panel Controls and Terminals

EN G

LI SH

Listening to the Demo Songs Demo songs are provided that effectively demonstrate each of the CLP-115s voices.

1. Turn on the power. (In case the power is not turned ON) Press the [POWER] button. When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.

2. Engage Demo mode. Press the [DEMO] button to engage Demo mode. The [DEMO] button indicator will light.

3. Play a Voice demo. While holding down the [DEMO] button, press one of the C1A1 keys to select and start the corresponding demo song. Starting with the selected tune, the demo songs will play in sequence until stopped.

Demo Song List Demo songs are original (2002 Yamaha Corporation) except for the three songs listed below. Refer to the voice list on page 17 for voice key assignments. The demo songs listed below are short re-arranged excerpts from the original compositions.

Adjusting the Volume

Use the [MASTER VOLUME] control to adjust the volume.

4. Stop the Voice demo. Press the [DEMO] button to stop playback.

Procedure

NOTE Refer to the voice list on page 17 for more information on the characteristics of each pre- set voice.

TERMINOLOGY Mode: A mode is a condition or status under which you can execute a certain function. In Demo mode, you can play back demo songs.

NOTE You cannot adjust the tempo of demo songs.

Key Voice Name Title Composer

C1 GrandPiano1 Consolation No.3 F. Liszt

E1 Harpsichord1 Gavotte J.S. Bach

F1 Harpsichord2 Invention No.1 J.S. Bach

C1The lowest key A1

DEMO

CLP-115 Listening to the Demo Songs 15

C

EN G

LI SH

16

Listening to 50 Piano Preset Songs The CLP-115 provides performance data for 50 piano songs. You can simply listen to these songs. You can also refer to the included 50 Greats for the Piano that contains scores for 50 piano preset songs.

1. Engage Preset Song mode. Press the [DEMO] button to engage Preset Song mode. The [DEMO] button indicator will light.

2. Play a preset song. While holding down the [DEMO] button, press one of the C2C

6 keys to select

and start the corresponding tune. To play all preset songs in sequence, while holding down the [DEMO] button, press the D6 key.

Adjusting the Volume

Use the [MASTER VOLUME] control to adjust the volume.

3. Stop playback. Playback will stop automatically when the selected preset song has nished. To stop the song during playback (or continuous playback), press the [DEMO] but- ton. To continue playing other songs, see procedure 2 above.

Procedure

TERMINOLOGY Song: On the CLP-115, performance data is called a Song. This includes demo songs and piano preset tunes.

TIP You can play the keyboard along with the preset song. You can change the voice playing on the keyboard.

TIP You can adjust the Reverb type (page 18) that is applied to the voice you play on the keyboard and to the preset song play- back.

NOTE The default tempo is automati- cally selected whenever a new preset song is selected, and when a new preset song begins playback.

NOTE To adjust the tempo of the preset song playback, see page 21.

NOTE When you select a different song (or a different song is selected during chained playback), an appropriate reverb type will be selected accordingly.

NOTE MIDI reception is not possible in Piano Song mode. Piano song data is not transmitted via the MIDI connectors.

C2 D6

C 6

The highest key

DEMO

LP-115 Listening to 50 Piano Preset Songs

EN G

LI SH

Selecting & Playing Voices

Selecting Voices

While holding down the [VOICE] button, press one of the C1A1 keys to select and start the corresponding voice.

Then, when you start playing, adjust the [MASTER VOLUME] control to the most com- fortable listening level.

Using the Pedals Damper (Right) Pedal The damper pedal functions in the same way as a damper pedal on an acoustic piano. When the damper pedal is pressed, notes sustain longer. Releasing the pedal immediately stops (damps) any sustained notes.

Procedure

TIP To understand the characteris- tics of various voices, listen to demo songs for each voice (page 15).

TERMINOLOGY Voice: On the CLP-115, a voice means a tone or tonal color.

NOTE Selecting a voice automatically engages the best-suited reverb type and depth (page 18) for that particular voice.

Key Voice Name Description

C1 Grand Piano 1 Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano.

C 1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music.

D1 E.Piano 1 An electronic piano sound created by FM synthesis. Good for popu- lar music.

D 1 E.Piano 2 The sound of an electric piano using hammer-struck metallic tines. Soft

tone when played lightly, and an aggressive tone when played hard.

E1 Harpsichord 1 The denitive instrument for baroque music. Since harpsichord uses plucked strings, there is no touch response.

F1 Harpsichord 2 Mixes the same voice an octave higher for a more brilliant tone.

F 1 Vibraphone Vibraphone played with relatively soft mallets. It has a tremolo effect

that is typical for vibraphone.

G1 Church Organ 1 This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period.

G 1 Church Organ 2 This is the organs full coupler sound, often associated with Bachs

Toccata and Fugue.

A1 Strings Spacious and large-scale string ensemble. Try combining this voice with piano in DUAL mode.

C1 D1 E1 F1 G1 A1

C 1

D 1

F 1

G 1

The lowest key

VOICE

When you press the damper pedal here, the notes you play before you release the pedal sustain longer.

NOTE If the damper pedal doesnt work, make sure that the pedal cord is properly plugged into the main unit (page 30).

CLP-115 Selecting & Playing Voices 17

C

EN G

LI SH

18

Sostenuto (Center) Pedal If you play a note or chord on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will not be sus- tained. This makes it possible to sustain a chord, for example, while other notes are played stac- cato.

Soft (Left) Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing when it is pressed.

Adding Variations to the Sound Reverb This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create a realistic acoustic ambience.

When you select a reverb, the reverb is automatically turned on. While holding down the [VOICE] button, press one of the C2E2 keys to select a reverb type.

Adjusting Reverb Depth

Adjust the reverb depth for the selected voice by pressing one of the C3G 4 keys while

holding down the [VOICE] button. The depth range is from 0 through 20.

When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal.

Procedure

Key Reverb Type Description

C2 Room This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room.

C 2 Hall1 For a bigger reverb sound, use the HALL 1 setting. This effect sim-

ulates the natural reverberation of a small-size concert hall.

D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall.

D 2 Stage Simulates the reverb of a stage environment.

E2 Off No effect is applied.

C2 D2 E2

C 2

D 2

The lowest key

VOICE

TIP The default reverb type (includ- ing OFF) and depth settings are different for each voice.

TIP depth 0: no effect

depth 20: maximum reverb depth

C3: depth 0

G 4: depth 20

The lowest key

VOICE

The depth value increases as you press higher keys.

NOTE Organ and string voices will con- tinue to sound for as long as the sostenuto pedal is depressed.

LP-115 Selecting & Playing Voices

EN G

LI SH

Combining Two Voices (Dual mode) You can play two voices simultaneously across the entire range of the keyboard. In this way, you can simulate a melody duet or combine two similar voices to create a thicker sound.

1. Engage Dual mode. While holding down the [VOICE] button, press two of the C1A1 keys at simul- taneously (or press one key while holding another). Refer to the voice list on page 17 for available voices.

According to the voice priority shown in the voice list (page 17), the voice assigned to the lower keyboard will be designated as Voice 1 (the other voice will be designated as Voice 2).

You can make the following settings only in Dual mode:

Setting the Octave

You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde- pendently. Depending on which voices you combine in Dual mode, the combi- nation may sound better if one of the voices is shifted up or down an octave.

While holding down the [VOICE] button, press one of the C5F5 keys.

Setting the Balance

You can set one voice as the main voice, and another voice as a softer, mixed voice.

While holding down the [VOICE] button, press one of the F 5F

6 keys.

A setting of 0 produces an equal balance between the two Dual mode voices. Settings below 0 increases the volume of Voice 2 in relation to Voice 1, and set- tings above 0 increases the volume of Voice 1 in relation to Voice 2.

2. Exit Dual mode and return to normal play mode. While holding down the [VOICE] button, press one of the C1A1 keys.

Procedure

NOTE You cannot assign the same voice to Voice 1 and Voice 2 simultaneously in Dual mode.

TIP Reverb in Dual Mode The reverb type assigned to Voice 1 will take priority over the other. (If the reverb is set to OFF, Voice 2 reverb type will be in effect.) Reverb depth setting (page 18) will be applied only to Voice 1.

C1 A1The lowest key

VOICE

C5 F5

VOICE

The highest keyFor setting the octave. (C5F5)

C5 key: 1 (Voice 1), C 5 key: 0 (Voice 1), D5 key: +1(Voice 1),

D 5 key: 1 (Voice 2), E5 key: 0 (Voice 2), F5 key: +1(Voice 2)

F 5

F 6

-5

-6 -4 -2 +1 +3 +6

-3 -1 0 +2 +4 +5

VOICE

The highest key

For setting the balance. (F5F6)

CLP-115 Selecting & Playing Voices 19

C

EN G

LI SH

20

Transposition The CLP-115s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals up to a maximum of six semitones, and lets you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set the transposition amount to 5, playing key C produces pitch F. In this way, you can play a song as though it were in C major, and the CLP-115 will transpose it to the key of F.

While holding down the A-1 and C 0 keys, press one of the F

2F

3 keys to set the

desired amount of transposition.

Pressing the C3 key produces normal keyboard pitch. Pressing the key to the left of C3 (=B2) transposes the pitch of the keyboard down a semitone, the next key to the left (=B

2) transposes down a whole tone (two semitones), etc., down to the F

2 key, which

transposes down six semitones. Upward transposition is accomplished in the same way using the keys to the right of C3, up to F

3, which transposes up six semitones.

Fine-tuning the Pitch You can ne-tune the pitch of the entire instrument. This function is useful when you play the CLP- 115 along with other instruments or CD music.

To tune up (in about 0.2Hz steps): Hold down the A-1 and B-1 keys simultaneously and press any key between C3 and B3.

To tune down (in about 0.2Hz steps): Hold down the A-1 and A

-1 keys simultaneously and press any key between C3 and

B3.

To restore standard pitch: Hold down the A-1, A

-1 and B-1 simultaneously and press any key between C3 and B3.

Setting range: 427.0-453.0 Hz Standard pitch: 440.0 Hz

Procedure

TERMINOLOGY Transpose: Changing the key signature of a song. On the CLP-115, trans- posing shifts the pitch of the entire keyboard.

TIP Notes below and above the A-1 .... C7 range of the CLP-115 sound one octave higher and lower, respectively.

A-1 C 0 C3

Normal pitch.

Transpose down.

Transpose up.

-5 -3 -1 0 +2 +4 +5

-6 -4 -2 +1 +3 +6

F 2 F 3

TERMINOLOGY Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a sec- ond.

Procedure

C3 B3A-1 B-1 A-1 A -1 A -1

A-1 B-1

To tune up To tune down To restore standard pitch

LP-115 Selecting & Playing Voices

EN G

LI SH

Using the Metronome The CLP-115 features a built-in metronome (a device that keeps an accurate tempo) that is conve- nient for practicing.

1. Start the metronome. Press the [METRONOME] button to turn on the metronome.

Determines the time signature

While holding down the [METRONOME] button, press one of the C3F3 keys.

Adjusting the tempo

The tempo of the metronome and preset song playback can be set from 32 to 280 beats per minute.

While holding down the [METRONOME] button, press a sequence of C4A4 keys to specify a three-digit number. Select a number starting from the left-most digit. For example, to set the tempo 95, press the C4 (0), A4 (9) and F4 (5) keys in sequence.

To increase the tempo value in steps of one, while holding down the [METRO- NOME] button, press the C

5 key. To decrease the tempo value in steps of one,

while holding down the [METRONOME] button, press the B4 key. To increase the tempo value in steps of ten, while holding down the [METRO- NOME] button, press the D5 key. To decrease the tempo value in steps of ten, while holding down the [METRONOME] button, press the A

4 key.

To set the default tempo (the metronomes original tempo or the songs original tempo), while holding down the [METRONOME] button, press the C5 key.

Procedure

NOTE During preset song playback, you can set the tempo from 20 to 400 beats per minute, depending on the song data.

D 3C 3

C3 D3 E3 F3

METRONOME

The highest key

C3 key: No downbeat, C 3 key: 2/4, D3 key: 3/4, D

3 key: 4/4, E3 key: 5/4, F3 key: 6/4

C4 A4

METRONOME

The highest key

0 2 4 5 7 9

8631

B4 C5 D5

C 5A 4 METRONOME

The highest key

CLP-115 Selecting & Playing Voices 21

C

EN G

LI SH

22

Adjusting the volume

You can change the volume of the metronome sound. While holding down the [METRONOME] button, press one of the C1G2 keys to determine the volume.

2. Stop the metronome. Turn off the metronome by pressing the [METRONOME] button.

C1 G2

METRONOME

The lowest key

The volume level increases as you press higher keys.

LP-115 Selecting & Playing Voices

EN G

LI SH

About MIDI MIDI (Musical Instrument Digital Interface) is a standard format for data transmission and reception. It enables the transfer of performance data and commands between MIDI devices and personal computers. Using MIDI, you can control a connected MIDI device from the CLP- 115, or control the CLP-115 from a connected MIDI device or com- puter.

MIDI connectors

MIDI [IN]: Receives MIDI data. MIDI [OUT]: Transmits MIDI data. MIDI [THRU]: Transmits data received at the MIDI [IN] connector, passing it through

the unit unmodied.

MIDI cables Prepare dedicated MIDI cables.

TIP MIDI performance data and commands are transferred in the form of numeric values.

TIP Since MIDI data that can be transmitted or received varies depending on the type of MIDI device, check the MIDI Imple- mentation Chart to nd out what MIDI data and commands your devices can transmit or receive. The CLP-115s MIDI Implementation Chart appears on page 38.

MIDI

INOUTTHRU

TIP You can also obtain detailed information about MIDI from various music books and other publications.

CLP-115 About MIDI 23

C

EN G

LI SH

24

Connecting a Personal Computer You can enjoy computer music data on the CLP-115 by connecting a computer to the MIDI jack.

There are two methods by which to connect the Clavinova to a personal computer: 1. Use a MIDI interface and the CLP-115s MIDI connectors (page 25). 2. Use the USB port on the computer and a USB interface (model UX16, UX96, or UX256) (page 25).

NOTE When the CLP-115 is used as a tone module, performance data with voices that are not found on the CLP-115 will not be played correctly.

The Clavinova-Computer Connection, is a supplementary guidebook that describes, for beginners, what you can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is not written for a specic models). The document is available as a PDF le (in English) at the following Internet address:

Clavinova Web site (English only): http://www.yamahaclavinova.com/

Yamaha Manual Library: http://www2.yamaha.co.jp/manual/english/

NOTE Before you connect the CLP-115 to a personal computer, rst turn off the power to both the CLP-115 and the computer. After you make the connections, turn on the power to the computer rst, then turn on the power to the CLP-115.

LP-115 Connecting a Personal Computer

EN G

LI SH

1. Using a MIDI interface and the CLP-115s MIDI connectors

Connection Use a MIDI interface to connect a computer to the CLP-115 using special MIDI cables.

2. Connecting the computers USB port to the CLP-115 via a USB interface, such as the UX16,UX96, or UX256

Connect the computers USB port to the USB interface (such as the UX16, UX96, or UX256) using a USB cable. Install the driver (that came with the USB interface) on the computer, and connect the USB interface to the CLP-115 using a serial cable or MIDI cables. For more information, refer to the instruction manual for the USB interface.

An example of connecting the USB interface to the CLP-115 using MIDI cables

MIDI OUT

MIDI OUT

MIDI IN

MIDI IN

MIDI OUT

MIDI IN

Windows Macintosh

CLP-115

MIDI interface

MIDI interface

MIDI

INOUTTHRU

USB cable

MIDI cables

CLP-115

USB interface

computer

MIDI

INOUTTHRU

MASTER

VOLUME

DEMO

METRONOME

VOICE

MIN MAX

POWER

CLP-115 Connecting a Personal Computer 25

C

EN G

LI SH

26

MIDI Functions You can make detailed adjustments to MIDI settings. For more information about MIDI, see the About MIDI section (page 23).

MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equip- ment must be matched for proper data transfer. This parameter enables you to specify the channel on which the CLP-115 transmits or receives MIDI data.

Setting the transmit channel While holding down the A-1 and C

0 keys, press one of the C1E2 keys.

Setting the receive channel While holding down the A-1 and C

0 keys, press one of the C4F5 keys.

Local Control ON/OFF Local Control refers to the fact that, normally, the CLP-115 keyboard controls its internal tone generator, allowing the internal voices to be played directly from the key- board. This situation is Local Control On, since the internal tone generator is con- trolled locally by its own keyboard. Local control can be turned OFF, however, so that the CLP-115 keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN con- nector.

While holding down the A-1 and C 0 keys, press the C6 key.

NOTE Demo and preset song data are not transmitted via MIDI.

NOTE In Dual mode, Voice 1 data is transmitted on its specied channel and Voice 2 data is transmitted on the next greater channel number relative to the specied channel. In this mode, no data is transmitted if the transmit channel is set to OFF.

TIP ALL:

A Multi-timbre Receive mode is available. It allows simulta- neous reception of different parts on all 16 MIDI channels, enabling the CLP-115 to play multi-channel song data received from a music computer or sequencer.

1+2:

A 1+2 Receive mode is avail- able. It allows simultaneous reception on channels 1 and 2 only, enabling the CLP-115 to play 1 and 2 channel song data received from a music computer or sequencer.

TIP Program change and other like channel messages received will not affect the CLP-115s panel settings or the notes you play on the keyboard.

NOTE The CLP-115 does not receive MIDI data when it is in Demo or Preset Song mode.

Procedure

Procedure

A-1 C1 C4 F5 E2

OFF

C 0 D 2

E5

1 3 5 6 8 10

2 4 7 9 11 14 16

12 13 15

For ALL mode

1 3 5 6 8 10

2 4 7 9 11 14 16

12 13 15 1+2

For setting the transmit channels.

(C1D 2)

For setting the receive channels.

(C4F5)

A-1 C 0 C6

The highest key

LP-115 MIDI Functions

EN G

LI SH

Program Change ON/OFF Normally the CLP-115 will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The CLP-115 will normally also send a MIDI program change number when- ever one of its voices is selected, causing the correspondingly-numbered voice or pro- gram to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and trans- mission so that voices can be selected on the CLP-115 without affecting the external MIDI device.

While holding down the A-1 and C 0 keys, press the C

6 key.

Control Change ON/OFF Normally the CLP-115 will respond to MIDI control change data received from an external MIDI device or keyboard, causing the voice on the corresponding channel to be affected by pedal and other control settings received from the controlling device (the keyboard voice is not affected). The CLP-115 also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmis- sion so that, for example, the CLP-115s pedal and other controls can be operated with- out affecting an external MIDI device.

While holding down the A-1 and C 0 keys, press the D6 key.

TIP For information on program change numbers for each of the CLP-115s voices, refer to page 35 in the MIDI Data For- mat section.

Procedure

A-1 C 0 C 6

The highest key

TIP For information on control changes that can be used with the CLP-115, refer to the MIDI Data Format on page 34.

Procedure

A-1 C 0 D6

The highest key

CLP-115 MIDI Functions 27

C

EN G

LI SH

28

Troubleshooting

Options BC-100 Bench

A comfortable bench styled to match your Yamaha Clavinova. HPE-160 Stereo Headphones

High-performance lightweight dynamic headphones with extra-soft ear pads.

Problem Possible Cause and Solution

The CLP-115 does not turn on. The CLP-115 has not been plugged in properly. Securely insert the female plug into the socket on the CLP-115, and the male plug into a proper AC outlet (page 11).

A click or pop is heard when the power is turned on or off.

This is normal when electrical current is being applied to the instrument.

Noise from the speakers or headphones is audible.

The noise may be due to interference caused by the use of a mobile phone in close proximity to the CLP-115. Turn off the mobile phone, or move it further away from the CLP-115.

The overall volume is low, or no sound is heard.

The Master Volume is set too low. Set it to an appropriate level using the [MASTER VOLUME] control.

Make sure a pair of headphones is not connected to the headphones jack. Make sure that Local Control (page 26) is ON.

The damper pedal has no effect, or the sound continuously sustains even when the damper pedal is not pressed.

The pedal cord may not be properly connected. Make sure to securely insert the pedal cord into the [PEDAL] jack (page 30).

LP-115 TroubleshootingCLP-115 Troubleshooting/Options

EN G

LI SH

Keyboard Stand Assembly CAUTION

Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accor- dance with the sequence given below.

Assembly should be carried out by at least two persons. Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage. Be sure to tighten up all screws upon completing assembly of each unit. To disassemble, reverse the assembly sequence given below.

Remove the following parts from the package.

1. Attach the side panels to the pedal box.

2. Attach the rear panel.

TIP A headphone hanger is included in the CLP-115 package. You can attach a headphone hanger on the CLP-115 to hang the headphones (page 12).

Have a Phillips-head (+) screwdriver ready

Assembly Parts

6 20 mm long screws 4 1

4 12 mm thin screws 2 3

Cord holders 26 16 mm short screws 4 2

4 20 mm tapping screws 4 4

Pedal box

Rear panel

Main unit

Side panel (left)

Side panel (right)

Bundled pedal cord inside

AC power cord

L

Side panel (right)

Side panel (left)

(1) Untie and straighten out the bun- dled cord attached to the bottom of the pedal box. Dont discard the twist tie, youll need it later in step 5.

(3) Use the four 620 mm long screws 1 to attach the pedal box.

(2) Align the sides of the pedal box with the left and right side panels.

R

L

(1) Secure the top of the rear panel to the side panel brackets using two 412 mm thin screws 3.

(2) Secure the bottom of the rear panel to the pedal box using four 420 mm tapping screws 4.

Place the bottom edges of the rear panel on the feets protruding edges, with the panel slightly angled as shown in the illustration.

CLP-115 Keyboard Stand Assembly 29

C

EN G

LI SH

30

3. Mount the main unit.

CAUTION Fingers can become pinched between the main

unit and the rear or side panels, be extra careful so as not to drop the main unit.

Do not hold the keyboard in any position other than the position shown in the illustration.

4. Fix the main unit.

5. Connect the pedal cord.

6. Set the voltage selector and connect the power cord.

Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a minus screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the AC INLET and an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin conguration of the AC wall outlets in your area.

R

Be sure to place your hands at least 10 cm from either end of the main unit when positioning it.

At least 10 cm

(1) Center the main unit to pro- duce equal clearance on the left and right sides.

(2) Use 6x16 mm short screws 2 to secure the main unit from the front.

PEDAL (1) Insert the pedal cord

plug to the pedal con- nector from the rear.

(2) Attach the cord holders to the rear panel as shown, then clip the cord into the holders.

(3) Use a twist tie to take up any slack in the pedal cord.

240

127

11 0220

LP-115 Keyboard Stand Assembly

EN G

LI SH

WARNING An improper voltage setting can cause serious damage to the CLP-115 or result in improper operation.

7. Set the adjuster.

After completing the assembly, please check the following.

When moving the instrument after assembly, always hold the bottom of the main unit.

CAUTION Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury.

Are there any parts left over? Review the assembly procedure and correct any

errors. Is the CLP-115 clear of doors and other movable

xtures? Move the CLP-115 to an appropriate location.

Does the CLP-115 make a rattling noise when you shake it? Tighten all screws.

Does the pedal box rattle or give way when you step on the pedals? Turn the adjuster so that it is set rmly against

the oor. Are the pedal and power cords inserted securely

into the sockets? Check the connection.

If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws.

Rotate the adjuster until it comes in rm contact with the oor surface.

Top portion

Key cover

CLP-115 Keyboard Stand Assembly 31

CLP-115 Index

EN G

LI SH

32

Index

Numerics

50 Greats for the Piano ...................................................16

50 Piano Preset Songs .....................................................16

A

Accessories .........................................................................8

Adjust Reverb Depth.............................................................18 Tempo (metronome) ................................................21 Volume (50 Piano Preset Songs) ..............................16 Volume (Demo) ........................................................15 Volume (metronome)...............................................22

Assembly ....................................................................2931

C

Center Pedal ..............................................................14, 18

Combining Two Voices (Dual mode)............................19

Connecting a Personal Computer ..................................24

D

Damper Pedal ............................................................14, 17

DEMO........................................................................1416

Dual mode .......................................................................19

H

Headphone Hanger.........................................................12

Headphones.....................................................................12

K

Key Cover ........................................................................10

L

Left Pedal ...................................................................14, 18

M

MASTER VOLUME..................................................11, 14

METRONOME ...................................................14, 2122

MIDI ................................................................................23

MIDI [IN] [OUT] [THRU]......................................14, 23

MIDI cables ...............................................................23, 25

MIDI connectors .......................................................23, 25

MIDI Data Format..........................................................34

MIDI Implementation Chart .........................................38

Music Rest .......................................................................10

P

PEDAL ....................................................................... 14, 30

PHONES.................................................................... 12, 14

POWER ..................................................................... 11, 14

PRECAUTIONS............................................................67

Preset songs 50 Piano Preset Songs ...........................16

R

Reverb..............................................................................18

Right Pedal ................................................................ 14, 17

S

Soft Pedal................................................................... 14, 18

Song .................................................................................16

Sostenute Pedal ......................................................... 14, 18

Specifications...................................................................39

Start/Stop playback 50 Piano Preset Songs ...............................................16 Demo Songs...............................................................15

T

Transporting .....................................................................8

Transposition ..................................................................20

Troubleshooting..............................................................28

V

VOICE .................................................................14, 1719

Appendix/Anhang/ Annexe/Apndice This section introduces reference material.

In diesem Abschnitt nden Sie Referenzmaterial.

Cette section prsente le matriel de rfrence.

En esta seccin se incluye material de referencia.

MIDI Data Format / MIDI-Datenformat / Format des donnes MIDI / Formato de datos MIDI ................... 34

MIDI Implementation Chart / MIDI Implementierung stabelle / Feuille dimplantation MIDI / Grca de implementacin MIDI ................................................................... 38

Specications / Technische Daten / Caractristiques techniques / Especicaciones .......................................... 39

CLP-115 33

C34

MIDI Data Format / MIDI-Datenformat / Format des donnes MIDI / Formato de datos MIDI

If youre already very familiar with MIDI, or are using a computer to control your music hardware with computer- generated MIDI messages, the data provided in this section can help you to control the CLP-115.

Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von MIDI-Steuermeldungen fr die Instrumente verwenden, knnen Sie sich zur Steuerung des CLP-115 nach den im folgenden Abschnitt aufgefhrten Spezikationen richten.

Si vous tes trs familier avec linterface MIDI ou si vous utilisez un ordinateur pour commander votre matriel de musique au moyen de messages MIDI gnrs par ordinateur, les donnes suivantes vous seront utiles et vous aideront commander le CLP-115.

SI usted est ya familiarizado con MIDI, o si emplea una computadora para controlar sus aparatos musicales con mensajes MIDI generados por computadora, los datos proporcionados en esta seccin le ayudarn a controlar la CLP-115.

1. NOTE ON/OFF Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /

Receive: 00H ~ 7FH = C-2 ~ G8)* vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv] (reception only) 8nH = Note OFF event (n = channel number) kk = Note number: 00H ~ 7FH = C-2 ~ G8 vv = Velocity * If received value exceeds the supported range for the

selected voice, the note is adjusted by the necessary num- ber of octaves.

2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv]

BnH = Control change (n = channel number) cc = Control number vv = Data Range

(1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H...7FH Bank selection processing does not occur until receipt of next Program Change message.

(2) Main Volume (reception only) ccH Parameter Data Range (vvH) 07H Volume MSB 00H...7FH

(3) Expression (reception only) ccH Parameter Data Range (vvH) 0BH Expression MSB 00H...7FH

(4) Damper ccH Parameter Data Range (vvH) 40H Damper MSB 00H...7FH

(5) Sostenuto ccH Parameter Data Range (vvH) 42H Sostenuto 00H-3FH:off, 40H-7FH:on

(6) Soft Pedal ccH Parameter Data Range (vvH) 43H Soft Pedal 00H-3FH:off, 40H-7FH:on

(7) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H...7FH Adjusts the reverb send level.

(8) Effect4 Depth (Variation Effect Send Level) (reception only) ccH Parameter Data Range (vvH) 5EH Effect4 Depth 00H...7FH

3. MODE MESSAGES Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number) cc = Control number vv = Data Range

(1) All Sound Off ccH Parameter Data Range (vvH) 78H All Sound Off 00H

(2) Reset All Controllers ccH Parameter Data Range (vvH) 79H Reset All Controllers 00H Resets controllers as follows. Controller Value Expression 127 (max) Damper Pedal 0 (off) Sostenuto 0 (off) Soft Pedal 0 (off)

(3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on)

(4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the spec- ied channel. Any notes being held by the damper or soste- nuto pedal will continue to sound until the pedal is released.

(5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off.

(6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off.

(7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off.

(8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off.

When control change reception is turned OFF, control change data will not be transmitted or received except for Bank Select and Mode messages.

Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with All Note Off transmission).

When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received.

The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received.

LP-115 Appendix/Anhang/Annexe/Apndice

4. PROGRAM CHANGE Data format: [CnH] -> [ppH]

CnH = Program event (n = channel number) ppH = Program change number

P.C.#=Program Change number

When you specify a program change as a number in the range of 0-127, specify a number that is one less than the program number listed above. For example, to specify pro- gram number 1, you would specify program change 0.

When program change reception is turned OFF, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received.

5. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing

Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs.

6. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) (1) Universal Realtime Message

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H]

MIDI Master Volume

Simultaneously changes the volume of all channels. When a MIDI master volume message is received, the volume

only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received.

X = dont care 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive

(2) Universal Non-Realtime Message (GM On)

General MIDI Mode On

Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H]

F0H = Exclusive status 7EH = Universal Non-Realtime 7FH = ID of target device 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive or F0H = Exclusive status 7EH = Universal Non-Realtime XnH = When received, n=0~F.

X = dont care 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings. This message requires approximately 50ms to execute, so sufcient time should be allowed before the next message is sent.

Voice Name MSB LSB P.C.#

Grand Piano 1 0 122 1

Grand Piano 2 0 112 1

E.Piano 1 0 122 6

E.Piano 2 0 122 5

Harpsichord 1 0 122 7

Harpsichord 2 0 123 7

Vibraphone 0 122 12

Church Organ 1 0 123 20

Church Organ 2 0 122 20

Strings 0 122 49

Data Transmission Reception

F8H Transmitted every 96 clocks

Received as 96-clock tempo timing when MIDI clock is set to External.

FAH Song start Song start Not received when the MIDI clock is set to Internal.

FCH Song stop Song stop Not received when the MIDI clock is set to Internal.

FEH Transmitted every 200 milliseconds

If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received.

CLP-115 Appendix/Anhang/Annexe/Apndice 35

C36

7. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change

Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H]

F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F.

When transmitted, n=0. 4CH = Model ID of XG hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | F7H = End of Exclusive Data size must match parameter size (2 or 4 bytes). When the XG System On message is received, the MIDI sys- tem will be reset to its default settings. The message requires approximately 50ms to execute, so sufcient time should be allowed before the next message is sent.

(2) XG Native Bulk Data (reception only)

Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] -> [bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...-> [ccH] -> [F7H]

F0H = Exclusive status 43H = YAMAHA ID 0nH = When received, n=0~F.

When transmitted, n=0. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive

Receipt of the XG SYSTEM ON message causes reinitializa- tion of relevant parameters and Control Change values. Allow sufcient time for processing to execute (about 50 msec) before sending the CLP-115 another message.

XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size).

For information about the Address and Byte Count values, refer to Table 1 below. Note that the tables Total Size value gives the size of a bulk block. Only the top address of the block (00H, 00H, 00H) is valid as a bulk data address.

8. SYSTEM EXCLUSIVE MESSAGES (Clavinova MIDI Format) Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]

F0H = Exclusive status 43H = Yamaha ID 73H = Clavinova ID 01H = Product ID (CLP common)

or

7F= Extended Product ID 24H = Product ID nnH = Substatus

nn Control 02H Internal MIDI clock 03H External MIDI clock 06H Bulk Data (the bulk data follows 06H)

F7H = End of Exclusive * When nn=02H or 03H, Clavinova common ID (01H) is

rec-ognized as well as 75H.

9. SYSTEM EXCLUSIVE MESSAGES (Special Control)

Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] -> [0nH] -> [ccH] -> [vvH] -> [F7H]

F0H = Exclusive status 43H = Yamaha ID 73H = Clavinova ID 7FH = Extended Product ID 24H = Product ID 11H = Special control 0nH = Control MIDI change (n=channel number) cc = Control number vv = Value F7H = End of Exclusive

Control Channel ccH vvH

Metronome Always 00H 1BH 00H : off 01H : 02H : 2/4 03H : 3/4 04H : 4/4 05H : 5/4 06H : 6/4 7FH : No accent

Channel Detune

ch: 00H-0FH 43H (Sets the Detune value for each channel) 00H-7FH

Voice Reserve

ch: 00H-0FH 45H 00H : Reserve off 7FH : on*

*

When Volume, Expression is received for Reserve On, they will be effective from the next Key On. Reserve Off is normal.

10. SYSTEM EXCLUSIVE MESSAGES (Others)

Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H] -> [00H] -> [mmH] -> [

ll

H] -> [ccH] -> [F7H] Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H = Exclusive Status 43H = Yamaha ID 1nH = When received, n=0~F.

When transmitted, n=0. 27H = Model ID of TG100 30H = Sub ID 00H = 00H = mmH = Master Tune MSB

ll

H = Master Tune LSB ccH = dont care (under 7FH) F7H = End of Exclusive

LP-115 Appendix/Anhang/Annexe/Apndice

MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) Parameter Description Default value (H)

00 00 00 4 020C - 05F4(*1) MASTER TUNE -50 - +50[cent] 00 04 00 00 01 1st bit 3 - 0

bit 15 - 12 400 02 2nd bit 3 - 0

bit 11 - 8 03 3rd bit 3 - 0

bit 7 - 4 4th bit 3 - 0

bit 3 - 0 04 1 00 - 7F MASTER VOLUME 0 - 127 7F 05 1 06 1 34 - 4C(*2) TRANSPOSE -12 - +12[semitones] 40 7E 00 XG SYSTEM ON 00=XG system ON 7F 00 RESET ALL PARAMETERS 00=ON (receive only) TOTAL SIZE 07

*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents. *2: Values from 28H through 33H are interpreted as -12 through -1. Values from 4DH through 58H are interpreted as +1 through +12.

MIDI Parameter Change table (EFFECT 1)

Refer to the Effect MIDI Map for a complete list of Reverb, Chorus and Variation type numbers.

Address (H) Size (H) Data (H) Parameter Description Default value (H)

02 01 00 2 00-7F REVERB TYPE MSB Refer to Effect MIDI Map 01(=HALL1) 00-7F REVERB TYPE LSB 00 : basic type 00

02 01 40 2 00-7F VARIATION TYPE MSB Refer to Effect MIDI Map 00(=Effect off) 00-7F VARIATION TYPE LSB 00 : basic type 00

VARIATION refers to the EFFECT on the panel.

MIDI Parameter Change table (MULTI PART) Address (H) Size (H) Data (H) Parameter Description Default value (H)

08 nn 11 1 00 - 7F DRY LEVEL 0 - 127 7F nn = Part Number

Effect MIDI Map

REVERB

MSB LSB ROOM 02H 10H HALL 1 01H 10H HALL 2 01H 11H STAGE 03H 10H

EFFECT

MSB LSB CHORUS 42H 10H PHASER 48H 10H TREMOLO 46H 10H DELAY 05H 10H

CLP-115 Appendix/Anhang/Annexe/Apndice 37

C38

MIDI Implementation Chart

YAMAHA [Clavinova] Date: 7 Mar, 2003 Model: CLP-115 MIDI Implementation Chart Version: 1.0

Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO O : Yes

Function Transmitted Recognized Remarks

Basic Default Channel Changed

1 1 - 16

1 1 - 16

Default Mode Messages

Altered

3 X *****************

1 *1 X X

Poly Mode only

Note Number : True voice

9 - 120 *****************

0 - 127 0 - 127

Velocity Note ON Note OFF

O 9nH, v=1 - 127 O 9nH, v=0

O 9nH, v=1 - 127 O 9nH, v=0 or 8nH

After Keys Touch Chs

X X

X X

Pitch Bend X X

Control Change 0, 32

7

11

64

66

67

91

94

O

O

X

O

O

O

O

X

O

O

O

O

O

O

O

O

Bank Select

Volume

Expression

Damper

Sostenuto

Soft pedal

Reverb Depth

Effect Depth

Program Change : True #

O *****************

O

System Exclusive O O

: Song Pos. Common : Song Sel.

: Tune

X X X

X X X

System : Clock Real Time : Commands

O O

O O

: All Sound Off Aux : Reset All Cntrls

: Local ON/OFF Messages : All Notes OFF

: Active Sense : Reset

O O X O O X

O (120, 126, 127) O (121) O (122) O (123 - 125) O X

Notes : *1 = Recieve Mode is always multi timbre and Poly mode.

LP-115 Appendix/Anhang/Annexe/Apndice

Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO X : No

Specications / Technische Daten /

Caractristiques techniques / Especicaciones

* Specications and descriptions in this owners manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specications at any time without prior notice. Since specications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

* Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behlt sich das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankndigung zu verndern oder zu modizieren. Da die technischen Daten, das Gert selbst oder Sonderzubehr nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-Hndler in Verbindung.

* Les caractristiques techniques et les descriptions du mode demploi ne sont donnes que pour information. Yamaha Corp. se rserve le droit de changer ou modier les produits et leurs caractristiques techniques tout moment sans aucun avis. Du fait que les caractristiques techniques, les quipements et les options peuvent diffrer dun pays lautre, adressez-vous au distributeur Yamaha le plus proche.

* Las especicaciones y descripciones de este manual del propietario tienen slo el propsito de servir como informacin. Yamaha Corp. se reserva el derecho a efectuar cambios o modicaciones en los productos o especicaciones en cualquier momento sin pre- vio aviso. Puesto que las especicaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite informacin a su distribuidor Yamaha.

Item CLP-115

Keyboard 88 keys (A-1 - C7)

Sound Source AWM Stereo Sampling

Polyphony 32 Notes Max.

Voice Selection 10

Effect Reverb

Volume Master Volume

Controls Dual, Metoronome, Transpose

Pedal Damper, Sostenuto, Soft

Demo Songs 10 voice Demo Songs, 50 preset Songs

Jacks/Connectors MIDI (IN/OUT/THRU), PHONES

2

Main Ampliers 20W

2

Speakers Oval (12cm

6cm)

2

Dimensions (W

D

H) (with music rest)

1345mm

426mm

815mm [52-15/16"

16-3/4"

32-1/16"] (1345mm

426mm

968mm) [53-15/16"

16-3/4"

38-1/8"]

Weight 41kg (90lbs., 6oz)

Accessories Owners Manual, 50 greats for the Piano (Music Book), Bench (included or optional depend- ing on locale), Quick Operation Guide

CLP-115 Appendix/Anhang/Annexe/Apndice 39

C40

MEMO

LP-115 Appendix/Anhang/Annexe/Apndice

MEMO

CLP-115 Appendix/Anhang/Annexe/Apndice 41

C42

MEMO

LP-115 Appendix/Anhang/Annexe/Apndice

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING

- When using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limited to, the following:

1.

Read all Safety Instructions, Installation Instructions, Spe-

cial Message Section items, and any Assembly Instructions found in this manual BEFORE making any connections, includ- ing connection to the main supply.

2.

Main Power Supply Verication: Yamaha products are

manufactured specically for the supply voltage in the area where they are to be sold. If you should move, or if any doubt exists about the supply voltage in your area, please contact your dealer for supply voltage verication and (if applicable) instruc- tions. The required supply voltage is printed on the name plate. For name plate location, please refer to the graphic found in the Special Message Section of this manual.

3.

This product may be equipped with a polarized plug (one

blade wider than the other). If you are unable to insert the plug into the outlet, turn the plug over and try again. If the problem persists, contact an electrician to have the obsolete outlet replaced. Do NOT defeat the safety purpose of the plug.

4.

Some electronic products utilize external power supplies

or adapters. Do NOT connect this type of product to any power supply or adapter other than one described in the owners manual, on the name plate, or specically recommended by Yamaha.

5.

WARNING:

Do not place this product or any other

objects on the power cord or place it in a position where anyone could walk on, trip over, or roll anything over power or connect- ing cords of any kind. The use of an extension cord is not recom- mended! If you must use an extension cord, the minimum wire size for a 25 cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician.

6.

Ventilation: Electronic products, unless specically

designed for enclosed installations, should be placed in locations that do not interfere with proper ventilation. If instructions for enclosed installations are not provided, it must be assumed that unobstructed ventilation is required.

7.

Temperature considerations: Electronic products should

be installed in locations that do not signicantly contribute to their operating temperature. Placement of this product close to heat sources such as; radiators, heat registers and other devices that produce heat should be avoided.

8.

This product was NOT designed for use in wet/damp loca-

tions and should not be used near water or exposed to rain. Examples of wet/damp locations are; near a swimming pool, spa, tub, sink, or wet basement.

9.

This product should be used only with the components

supplied or; a cart, rack, or stand that is recommended by the manufacturer. If a cart, rack, or stand is used, please observe all safety markings and instructions that accompany the accessory product.

10.

The power supply cord (plug) should be disconnected

from the outlet when electronic products are to be left unused for extended periods of time. Cords should also be disconnected when there is a high probability of lightning and/or electrical storm activity.

11.

Care should be taken that objects do not fall and liquids are

not spilled into the enclosure through any openings that may exist.

12.

Electrical/electronic products should be serviced by a

qualied service person when: a. The power supply cord has been damaged; or b. Objects have fallen, been inserted, or liquids have been

spilled into the enclosure through openings; or c. The product has been exposed to rain: or d. The product dose not operate, exhibits a marked change

in performance; or e. The product has been dropped, or the enclosure of the

product has been damaged.

13.

Do not attempt to service this product beyond that

described in the user-maintenance instructions. All other servic- ing should be referred to qualied service personnel.

14.

This product, either alone or in combination with an

amplier and headphones or speaker/s, may be capable of pro- ducing sound levels that could cause permanent hearing loss. DO NOT operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. 15.

Some Yamaha products may have benches and/or accessory

mounting xtures that are either supplied as a part of the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional xtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended.

PLEASE KEEP THIS MANUAL

92-469-2

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

(2 wires) This applies only to products distributed by Yamaha-Kemble Music

(U.K.) Ltd.

(polarity) This applies only to products distributed by Yamaha Canada Music

Ltd. Ceci ne sapplique quaux produits distribus par Yamaha Canada

Musique Lte.

FCC INFORMATION (U.S.A.)

1.

IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instruc- tions contained in this manual, meets FCC require- ments. Modications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2.

IMPORTANT:

When connecting this product to acces- sories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Fail- ure to follow instructions could void your FCC authoriza- tion to use this product in the USA.

3.

NOTE:

This product has been tested and found to com- ply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/ uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of

other electronic devices. Compliance with FCC regula- tions does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line lter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfac- tory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corpo- ration of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:

BLUE : NEUTRAL BROWN : LIVE

As the colours of the wires in the mains lead of this appa- ratus may not correspond with the coloured makings iden- tifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth ter- minal of the three pin plug.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR VITER LES CHOCS LEC- TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.

Pour plus de dtails sur les produits, veuillez-vous adresser Yamaha ou au distributeur le plus proche de vous gurant dans la liste suivante.

Die Einzelheiten zu Produkten sind bei Ihrer unten aufgefhrten Niederlassung und bei Yamaha Vertragshndlern in den jeweiligen Bestimmungslndern erhltlich.

Para detalles sobre productos, contacte su tienda Yamaha ms cercana o el distribuidor autorizado que se lista debajo.

CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311

U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011

MEXICO Yamaha de Mexico S.A. De C.V., Departamento de ventas Javier Rojo Gomez No.1149, Col. Gpe Del Moral, Deleg. Iztapalapa, 09300 Mexico, D.F. Tel: 686-00-33

BRAZIL Yamaha Musical do Brasil LTDA. Av. Rebouas 2636, So Paulo, Brasil Tel: 011-853-1377

ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021

PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanizacin Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panam, Panam Tel: +507-269-5311

THE UNITED KINGDOM Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700

IRELAND Danfay Ltd. 61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin Tel: 01-2859177

GERMANY Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

SWITZERLAND/LIECHTENSTEIN Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zrich, Switzerland Tel: 01-383 3990

AUSTRIA Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900

THE NETHERLANDS Yamaha Music Central Europe, Branch Nederland Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040

BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032

FRANCE Yamaha Musique France, S.A. Division Professionnelle BP 70-77312 Marne-la-Valle Cedex 2, France Tel: 01-64-61-4000

ITALY Yamaha Musica Italia S.P.A. Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771

SPAIN/PORTUGAL Yamaha-Hazen Msica, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888

GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160

SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box 30053 S-400 43 Gteborg, Sweden Tel: 031 89 34 00

DENMARK YS Copenhagen Liaison Ofce Generatorvej 8B DK-2730 Herlev, Denmark Tel: 44 92 49 00

FINLAND F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511

NORWAY Norsk lial av Yamaha Scandinavia AB Grini Nringspark 1 N-1345 sters, Norway Tel: 67 16 77 70

ICELAND Skifan HF Skeifan 17 P.O. Box 8120 IS-128 Reykjavik, Iceland Tel: 525 5000

OTHER EUROPEAN COUNTRIES Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312

TURKEY/CYPRUS Yamaha Music Central Europe GmbH Siemensstrae 22-34, 25462 Rellingen, Germany Tel: 04101-3030

OTHER COUNTRIES Yamaha Music Gulf FZE LB21-128 Jebel Ali Freezone P.O.Box 17328, Dubai, U.A.E. Tel: +971-4-881-5868

HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688

INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577

KOREA Yamaha Music Korea Ltd. Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0661

MALAYSIA Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-703-0900

PHILIPPINES Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551

SINGAPORE Yamaha Music Asia Pte., Ltd. 11 Ubi Road #06-00, Meiban Industrial Building, Singapore Tel: 65-747-4374

TAIWAN Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688

THAILAND Siam Music Yamaha Co., Ltd. 121/60-61 RS Tower 17th Floor, Ratchadaphisek RD., Dindaeng, Bangkok 10320, Thailand Tel: 02-641-2951

THE PEOPLES REPUBLIC OF CHINA AND OTHER ASIAN COUNTRIES

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317

AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111

NEW ZEALAND Music Houses of N.Z. Ltd. 146/148 Captain Springs Road, Te Papapa, Auckland, New Zealand Tel: 9-634-0099

COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN

Yamaha Corporation, Asia-Pacic Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA

MIDDLE EAST

ASIA

OCEANIA

HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-3273

[CL] 29

Clavinova Web site (English only) http://www.yamahaclavinova.com/ Yamaha Manual Library http://www2.yamaha.co.jp/manual/english/

DIC 244

Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones Before using the Clavinova, be sure to read PRECAUTIONS on pages 6-7. Achten Sie darauf, vor Einsatz des Clavinova die VORSICHTSMASSNAHMEN auf Seite 6-7 durchzulesen. Avant d'utiliser le Clavinova, lire attentivement la section PRECAUTIONS D'USAGE aux pages 6- 7. Antes de utilizar el Clavinova, lea las PRECAUCIONES que debe tener en cuenta en las pginas 6- 7.

IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.

WICHTIG berprfung der Stromversorgung Vergewissern Sie sich vor dem Anschlieen an das Stromnetz, da die rtliche Netzspannung den Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswhler an der Unterseite neben der Netzkabeldurchfhrung ausgestattet. Falls vorhanden, mu der Spannungswhler auf die rtliche Netzspannung eingestellt werden. Der Spannungswhler wurde werkseitig auf 240 V voreingestellt. Zum Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher, bis der Zeiger auf den korrekten Spannungswert weist.

IMPORTANT Contrler la source d'alimentation Vrifiez que la tension spcifie sur le panneau infrieur correspond la tension du secteur. Dans certaines rgions, l'instrument peut tre quip d'un slecteur de tension situ sur le panneau infrieur du clavier proximit du cordon d'alimentation. Vrifiez que ce slecteur est bien rgl en fonction de la tension secteur de votre rgion. Le slecteur de tension est rgl sur 240 V au dpart d'usine. Pour modifier ce rglage, utilisez un tournevis lame plate pour tourner le slecteur afin de mettre l'indication correspondant la tension de votre rgion vis vis du repre triangulaire situ sur le panneau.

IMPORTANTE Verifique la alimentacin de corriente Asegrese de que tensin de alimentacin de CA de su rea corresponde con la tensin especificada en la placa de caractersticas del panel inferior. En algunas zonas puede haberse incorporado un selector de tensin en el panel inferior de la unidad del teclado principal, cerca del cable de alimentacin. Asegrese de que el selector de tensin est ajustado a la tensin de su rea. El selector de tensin se

Manualsnet FAQs

If you want to find out how the Clavinova Yamaha works, you can view and download the Yamaha Clavinova CLP-115 Piano Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha Clavinova as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha Clavinova. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha Clavinova CLP-115 Piano Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha Clavinova CLP-115 Piano Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha Clavinova CLP-115 Piano Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha Clavinova CLP-115 Piano Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha Clavinova CLP-115 Piano Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.