Summary of Content for Yamaha PDS-150 Pedestal User's Manual PDF
PDS 150 PEDESTAL
Manuel dinstallation Avant d'essayer d'essembler ces accessoires, veuillez lire ces instructions compltement. Veuillez garder ce manuel pour une rfrence future.
Instrucciones de instalacin Antes de instalar estos accesorios, lea cuidadosamente estas instrucciones. Guarde estas instrucciones para futuras referencias.
Installation Instructions Before attempting to assemble these accessories, please read these instructions completely. Please retain this book for future reference.
Precautions with regard to setting up WARNING
Installation work should only be carried out by a qualified technician. If the pedestal is not installed correctly, the wide plasma display may fall over and personal injury may result.
Do not use any displays other than those given in the catalogue. Do not climb up onto the pedestal or use it as a step. (Young children should be made particularly aware of this caution.) If the unit falls over or becomes damaged through misuse, injury may result.
Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal whilst it is physically damaged, personal injury may result. Contact your
nearest YAMAHA Dealer immediately.
Set up on a stable, level surface. If this is not done, the unit may fall over and become damaged, and personal injury may result.
Do not use in places with high humidity. Long-term usage in such conditions can cause warping or deformation. This can lead to loss of
strength, and the unit may fall over and become damaged, and personal injury may result.
During setting-up, make sure that all screws are securely tightened. If sufficient care is not taken to ensure screws are properly tightened during assembly, the
pedestal will not be strong enough to support the wide plasma display, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the wide plasma display. If the unit is knocked or children climb onto the pedestal with the wide plasma display installed,
the wide plasma display may fall over and personal injury may result.
Two people are required to install and remove the display. If two people are not present, the display may be dropped, and personal injury may result.
Notes on handling 1) If the unit is placed in direct sunlight or next to a stove, the light and heat may cause discoloration or deformation.
Wipe the unit with a dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a
small amount of neutral detergent has been added, and then wipe with a dry cloth.
Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface
(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)
3) Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty.
Assembling the pedestal / Setting-up
Assembly screw ...........................4
Assembly screw (Black screw) ....4
Pole ...................2 Base ..................1
For 50 display(Outside)
Insert the poles into the left and right holes in the underside of the base so that they fit securely as shown in the illustration above.
2. Securing the poles
Use the assembly screws to secure the poles firmly to the bottom of the base.
Accessories for pedestal assembly
Assembling the pedestal The numbers (such as ) in the explanatory text indicate part numbers in the table of accessories.
1. Installing the poles
1. Setting up the display unit
Cloth or similar
Spread a clean cloth or similar material over a level floor or base, and place the display unit on it face down.
2. Securing the display unit
* Carry out work on a horizontal and level surface.
Use the assembly screws (Black screw) to fasten securely. Lift the display unit above the pedestal base, with the back of the display unit on the same side as the Nameplate. Then align the holes in the display unit with the poles of the pedestal and lower the display unit into place.
Assemble the poles correctly by referring to the illustrations below.
If securing to the base If securing to a wall
Screw into the middle of the back edge of a wood worktop.
Band .................2 Wood screw......2 Clamp ...............4Black screw ......4
* Use strong wire or chain which is commercially available to secure the wide plasma display to a solid area of the wall or a pillar.
Preventing the wide plasma display from falling over
685 (26 31/32)
5 / 8) 10
(4 5 /
727 (28 5/8) 62.5 (2 29/64)
Units : mm (inches)
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VSTRA FRLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in Japan M0602-0
If you want to find out how the PDS-150 Yamaha works, you can view and download the Yamaha PDS-150 Pedestal User's Manual on the Manualsnet website.
Yes, we have the User's Manual for Yamaha PDS-150 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User's Manual should include all the details that are needed to use a Yamaha PDS-150. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Yamaha PDS-150 Pedestal User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Yamaha PDS-150 Pedestal User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Yamaha PDS-150 Pedestal User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Yamaha PDS-150 Pedestal User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha PDS-150 Pedestal User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.