Contents

Yamaha CZD300N XMAX 2022 Owner's Manual PDF

1 of 122
1 of 122

Summary of Content for Yamaha CZD300N XMAX 2022 Owner's Manual PDF

CZD300N

LIT-11626-35-13

1

2

3

4

5

6

o

MOTORCYCLE

OWNERS MANUAL

For your safety pre-operation checks

Instrument and control functions

Smart key system

Description

Safety information

Location of important labels

Read efore

7

8

9

10

11Consumer information

Specifications

Scooter care and storage

Operation and important riding points

Periodic maintenance and adjustment

b

this manual carefully perating this vehicle.

B5

DIC183

12

X-F8199-10

Index

[English (E)]

EAU10045

Operating, servic maintaining a passenger vehicle or off-ro an expose you to chemicals including engin

s, and lead, w rnia to cause uctive harm. xhaust, do no , service you ar gloves or w icing your ve re

assenger-ve

Read le. This man tay with the vehicle if it is sold.

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

carbon monoxide, phthalate known to the State of Califo birth defects or other reprod exposure, avoid breathing e engine except as necessary well-ventilated area and we hands frequently when serv information go to www.P65Warnings.ca.gov/p

this manual carefully before operating the vehic

ing and ad vehicle c e exhaust,

hich are cancer and To minimize t idle the

r vehicle in a ash your

hicle. For mo

hicle

ual should s

Introduction

EAU10084

Congratulations on your purchase of the Yamaha CZD300N. This model is the result of Yamahas vast experience in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer. The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable at the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual. Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur- rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and this manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA10012

Please read this manual and the YOU AND YOUR MOTORCYCLE: RIDING TIPS booklet carefully before operating

this motorcycle. Do not attempt to operate this motorcycle until you have attained adequate knowledge of its con-

trols and operating features. Regular inspections and careful maintenance, along with good operating techniques,

will help ensure that you safely enjoy the capabilities and reliability of this motorcycle.

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Im

EAU10134

Pa ions:

*P

to potential personal injury ymbol to avoid possible injury

if not avoided, could result in

e taken to avoid damage to the

ier or clearer.

N

T

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

portant manual information

rticularly important information is distinguished in this manual by the following notat

roduct and specifications are subject to change without notice.

This is the safety alert symbol. It is used to alert you hazards. Obey all safety messages that follow this s or death.

A WARNING indicates a hazardous situation which, death or serious injury.

A NOTICE indicates special precautions that must b vehicle or other property.

A TIP provides key information to make procedures eas

WARNING

OTICE

IP

t manual information

EAUN0770

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

Importan

CZD300N OWNERS MANUAL

2022 by Yamaha Motor Corporation, U.S.A.

1st edition, August 2021 All rights reserved.

Any reprinting or unauthorized use without the written permission of

Yamaha Motor Corporation, U.S.A. is expressly prohibited.

Printed in Indonesia. P/N LIT-11626-35-13

eriodic maintenance chart for the emission control system ....... 8-3 eneral maintenance and lubrication chart .......................... 8-4 emoving and installing the panel............................................ 8-8 hecking the spark plug................. 8-9 anister ........................................ 8-10 ngine oil and oil filter element..... 8-10 hy Yamalube.............................. 8-12

inal transmission oil .................... 8-13 oolant ......................................... 8-14 ir filter and V-belt case air filter elements.................................... 8-15 hecking the throttle grip free play..................................... 8-19

alve clearance............................. 8-20 ires .............................................. 8-20 ast wheels .................................. 8-22 hecking the front and rear brake lever free play.................. 8-22 hecking the front and rear brake pads ................................ 8-23 hecking the brake fluid level ...... 8-23 hanging the brake fluid .............. 8-24 hecking the V-belt ...................... 8-25 hecking and lubricating the cables.................................. 8-25 hecking and lubricating the throttle grip and cable ............... 8-25

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Ta

Loc

Sa

F

De

L R C

Sm

S P O

H

S S M

Ins

In

S T M H F R A

ble of contents

ation of important labels........... 1-1

fety information............................ 2-1 urther safe-riding points ............... 2-5

scription ....................................... 3-1 eft view ......................................... 3-1 ight view....................................... 3-2 ontrols and instruments ............... 3-3

art key system ........................... 4-1 mart key system........................... 4-1 art 15 of FCC Rules...................... 4-2 perating range of the smart key system......................................... 4-2 andling of the smart key and mechanical keys ......................... 4-3

mart key ....................................... 4-5 mart key battery ........................... 4-6 ain switch .................................... 4-7

trument and control functions... 5-1 dicator lights and warning lights............................................ 5-1

peedometer.................................. 5-2 achometer .................................... 5-2 ulti-function display ..................... 5-3 andlebar switches...................... 5-10 ront brake lever .......................... 5-12 ear brake lever ........................... 5-12 BS .............................................. 5-12

Traction control system ................5-13 Fuel tank cap ................................5-15 Fuel ...............................................5-16 Fuel tank overflow hose ................5-17 Catalytic converter ........................5-18 Storage compartments .................5-18 Windshield ....................................5-20 Handlebar position .......................5-22 Adjusting the shock absorber

assemblies.................................5-23 Power outlet ..................................5-23 Sidestand ......................................5-24 Ignition circuit cut-off system .......5-25

For your safety pre-operation

checks ...............................................6-1

Operation and important riding

points .................................................7-1 Engine break-in ...............................7-1 Starting the engine..........................7-2 Starting off ......................................7-3 Acceleration and deceleration ........7-3 Braking............................................7-3 Tips for reducing fuel

consumption................................7-4 Parking ............................................7-4

Periodic maintenance and

adjustment ........................................8-1 Tool kit ............................................8-2

P

G

R

C C E W F C A

C

V T C C

C

C C C C

C

Table of contents

S

S

C

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

Lubricating the front and rear brake levers................................8-26

Checking and lubricating the centerstand and sidestand ........8-26

Checking the front fork..................8-27 Checking the steering ...................8-28 Checking the wheel bearings ........8-28 Battery...........................................8-28 Replacing the fuses.......................8-30 Vehicle lights .................................8-31 Replacing a turn signal light

bulb ............................................8-31 Replacing the license plate

light bulb ....................................8-32 Troubleshooting ............................8-33 Troubleshooting chart ...................8-35 Emergency mode .........................8-37

cooter care and storage ................9-1 Matte color caution .........................9-1 Care.................................................9-1 Storage............................................9-3

pecifications..................................10-1

onsumer information ...................11-1 Identification numbers...................11-1 Diagnostic connector ....................11-2 Vehicle data recording ..................11-2 Reporting safety defects ...............11-4 Scooter noise regulation ...............11-5

Maintenance record...................... 11-6 YAMAHA MOTOR

CORPORATION, U.S.A. 2020 AND LATER MODEL SCOOTER LIMITED WARRANTY............................... 11-8

YAMAHA EXTENDED SERVICE (Y.E.S.)..................................... 11-10

Index ................................................ 12-1

L

1 EAU10385

Re ion for safe and proper operation of yo read or comes off, a replacement lab

8 9

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

ocation of important labels

1-1

ad and understand all of the labels on your vehicle. They contain important informat ur vehicle. Never remove any labels from your vehicle. If a label becomes difficult to el is available from your Yamaha dealer.

2,31

45

6,7,

n of important labels

1

NG

ns high en gas. cause

anual

e, n.

B74-F2259-10

OTTLE BODY

ATMOSPHERE

ROUTING

B74-F1686-00

WARNING

can cause loss of control. nual for proper loading.

B74-F816J-00

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

Locatio

1-2

LOAD LIMIT 1 kg { 2 lbs}

BB8-F4877-20

B74-F118K-00

WARNING BEFORE YOU OPERATE THIS VEHICLE, READ THE OWNERS MANUAL AND ALL LABELS. ALWAYS WEAR AN APPROVED MOTORCYCLE HELMET, eye protection, and protective clothing.

NOTICE Cleaning with alkaline or acid cleaner, gasoline or solvent will damage windshield. Use neutral detergent.

B74-F815K-00

WARNI

This unit contai pressure nitrog Mishandling can explosion.

Read owners m for instructions. Do not incinerat puncture or ope

FUEL TANK THR

CANISTER

EMISSION HOSE

Improper loading Read owners ma

1

2

3

4

5

6

L

1

IT )

4877-00

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

ocation of important labels

1-3

LOAD LIMIT 5 kg { 11 lbs}

BB8-F4877-30

LOAD LIM 0.5 kg ( 1.1 lb

B74-F

B74-F1668-10

TIRE INFORMATION Cold tire normal pressure should be set as follows. Up to 90 kg (198 lbs) load FRONT REAR

: 200 kPa, (2.00 kgf/cm), 29 psi : 225 kPa, (2.25 kgf/cm), 33 psi

90kg (198 lbs) ~ maximum load FRONT REAR

: 200 kPa, (2.00 kgf/cm), 29 psi : 225 kPa, (2.25 kgf/cm), 33 psi

7

8

9

2

Safety information

conspicuous appears to be very effective in reducing the chance of this type of accident. Therefore:

Wear a brightly colored jacket. Use extra caution when you are

approaching and passing through intersections, since in- tersections are the most likely places for scooter accidents to occur.

Ride where other motorists can see you. Avoid riding in another motorists blind spot.

Never maintain a scooter with- out proper knowledge. Contact an authorized scooter dealer to inform you on basic scooter maintenance. Certain mainte- nance can only be carried out by certified staff.

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Be

As sp at Sc Th pe te th kn fo He

2-1

EAU1026B

a Responsible Owner

the vehicles owner, you are re- onsible for the safe and proper oper- ion of your scooter. ooters are single-track vehicles. eir safe use and operation are de- ndent upon the use of proper riding

chniques as well as the expertise of e operator. Every operator should ow the following requirements be- re riding this scooter. or she should:

Obtain thorough instructions from a competent source on all aspects of scooter operation. Observe the warnings and mainte- nance requirements in this Own- ers Manual. Obtain qualified training in safe and proper riding techniques. Obtain professional technical ser- vice as indicated in this Owners Manual and/or when made neces- sary by mechanical conditions.

Never operate a scooter without proper training or instruction. Take a training course. Beginners should receive training from a cer- tified instructor. Contact an autho- rized scooter dealer to find out about the training courses nearest you.

Safe Riding

Perform the pre-operation checks each time you use the vehicle to make sure it is in safe operating condition. Failure to inspect or maintain the vehi- cle properly increases the possibility of an accident or equipment damage. See page 6-1 for a list of pre-operation checks. This scooter is designed to carry

the operator and a passenger. The failure of motorists to detect

and recognize scooters in traffic is the predominating cause of auto- mobile/scooter accidents. Many accidents have been caused by an automobile driver who did not see the scooter. Making yourself

2

tective Apparel

majority of fatalities from scooter idents are the result of head inju- . The use of a safety helmet is the le most critical factor in the pre- tion or reduction of head injuries. Always wear an approved helmet. Wear a face shield or goggles. Wind in your unprotected eyes could contribute to an impairment of vision that could delay seeing a hazard. The use of a jacket, substantial shoes, trousers, gloves, etc., is ef- fective in preventing or reducing abrasions or lacerations. Never wear loose-fitting clothes, otherwise they could catch on the control levers or wheels and cause injury or an accident. Always wear protective clothing that covers your legs, ankles, and feet. The engine or exhaust sys- tem become very hot during or af- ter operation and can cause burns. A passenger should also observe the above precautions.

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

Safety information

2-2

Many accidents involve inexperi- enced operators. In fact, many op- erators who have been involved in accidents do not even have a cur- rent drivers license. Make sure that you are qualified

and that you only lend your scooter to other qualified opera- tors.

Know your skills and limits. Staying within your limits may help you to avoid an accident.

We recommend that you prac- tice riding your scooter where there is no traffic until you have become thoroughly familiar with the scooter and all of its con- trols.

Many accidents have been caused by error of the scooter op- erator. A typical error made by the operator is veering wide on a turn due to excessive speed or under- cornering (insufficient lean angle for the speed). Always obey the speed limit and

never travel faster than warrant- ed by road and traffic condi- tions.

Always signal before turning or changing lanes. Make sure that other motorists can see you.

The posture of the operator and passenger is important for proper control. The operator should keep both

hands on the handlebar and both feet on the operator foot- rests during operation to main- tain control of the scooter.

The passenger should always hold onto the operator, the seat strap or grab bar, if equipped, with both hands and keep both feet on the passenger footrests. Never carry a passenger unless he or she can firmly place both feet on the passenger footrests.

Never ride under the influence of alcohol or other drugs.

This scooter is designed for on- road use only. It is not suitable for off-road use.

Pro

The acc ries sing ven

Safety information

2

A

A m c a c C le p a c a u le fo ve sy so fr M

Cargo and accessory weight should be kept as low and close to the scooter as possible. Securely pack your heaviest items as close to the center of the vehicle as pos- sible and make sure to distribute the weight as evenly as possible on both sides of the scooter to minimize imbalance or instability. Shifting weights can create a sud- den imbalance. Make sure that accessories and cargo are se- curely attached to the scooter be- fore riding. Check accessory mounts and cargo restraints fre- quently. Properly adjust the suspension

for your load (suspension-ad- justable models only), and check the condition and pres- sure of your tires.

Never attach any large or heavy items to the handlebar, front fork, or front fender. Such items can create unstable handling or a slow steering response.

This vehicle is not designed to

pull a trailer or to be attached to

a sidecar.

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

2-3

void Carbon Monoxide Poisoning

ll engine exhaust contains carbon onoxide, a deadly gas. Breathing

arbon monoxide can cause head- ches, dizziness, drowsiness, nausea, onfusion, and eventually death. arbon Monoxide is a colorless, odor- ss, tasteless gas which may be resent even if you do not see or smell ny engine exhaust. Deadly levels of arbon monoxide can collect rapidly nd you can quickly be overcome and nable to save yourself. Also, deadly vels of carbon monoxide can linger r hours or days in enclosed or poorly ntilated areas. If you experience any mptoms of carbon monoxide poi- ning, leave the area immediately, get

esh air, and SEEK MEDICAL TREAT- ENT. Do not run engine indoors. Even if

you try to ventilate engine exhaust with fans or open windows and doors, carbon monoxide can rap- idly reach dangerous levels.

Do not run engine in poorly venti- lated or partially enclosed areas such as barns, garages, or car- ports.

Do not run engine outdoors where engine exhaust can be drawn into a building through openings such as windows and doors.

Loading

Adding accessories or cargo to your scooter can adversely affect stability and handling if the weight distribution of the scooter is changed. To avoid the possibility of an accident, use extreme caution when adding cargo or acces- sories to your scooter. Use extra care when riding a scooter that has added cargo or accessories. Here, along with the information about accessories be- low, are some general guidelines to fol- low if loading cargo to your scooter: The total weight of the operator, pas- senger, accessories and cargo must not exceed the maximum load limit. Operation of an overloaded vehicle

could cause an accident.

When loading within this weight limit, keep the following in mind:

Maximum load: 161 kg (355 lb)

2

Ge

Ch is Ya ab be by M to ce fo a th Th do ce m m ins

Af

M

W uc ge niz rie be yo

Bulky or large accessories may seriously affect the stability of the scooter due to aerodynamic effects. Wind may attempt to lift the scooter, or the scooter may become unstable in cross winds. These accessories may also cause instability when passing or being passed by large vehicles.

Certain accessories can dis- place the operator from his or her normal riding position. This improper position limits the freedom of movement of the operator and may limit control ability, therefore, such accesso- ries are not recommended.

Use caution when adding electri- cal accessories. If electrical ac- cessories exceed the capacity of the scooters electrical system, an electric failure could result, which could cause a dangerous loss of lights or engine power.

UB5X10E0.book Page 4 Thursday, May 27, 2021 8:55 AM

Safety information

2-4

nuine Yamaha Accessories

oosing accessories for your vehicle an important decision. Genuine

maha accessories, which are avail- le only from a Yamaha dealer, have en designed, tested, and approved Yamaha for use on your vehicle. any companies with no connection Yamaha manufacture parts and ac- ssories or offer other modifications r Yamaha vehicles. Yamaha is not in position to test the products that ese aftermarket companies produce. erefore, Yamaha can neither en- rse nor recommend the use of ac- ssories not sold by Yamaha or odifications not specifically recom- ended by Yamaha, even if sold and talled by a Yamaha dealer.

termarket Parts, Accessories, and

odifications

hile you may find aftermarket prod- ts similar in design and quality to nuine Yamaha accessories, recog- e that some aftermarket accesso- s or modifications are not suitable cause of potential safety hazards to u or others. Installing aftermarket

products or having other modifications performed to your vehicle that change any of the vehicles design or operation characteristics can put you and others at greater risk of serious injury or death. You are responsible for injuries related to changes in the vehicle. Keep the following guidelines in mind, as well as those provided under Load- ing when mounting accessories. Never install accessories or carry

cargo that would impair the per- formance of your scooter. Careful- ly inspect the accessory before using it to make sure that it does not in any way reduce ground clearance or cornering clearance, limit suspension travel, steering travel or control operation, or ob- scure lights or reflectors. Accessories fitted to the han-

dlebar or the front fork area can create instability due to improp- er weight distribution or aerody- namic changes. If accessories are added to the handlebar or front fork area, they must be as lightweight as possible and should be kept to a minimum.

Safety information

2

A

T sc p vi b si a sp re

T

B ti a

EAU57600

rther safe-riding points Be sure to signal clearly when making turns. Braking can be extremely difficult on a wet road. Avoid hard braking, because the scooter could slide. Apply the brakes slowly when stopping on a wet surface. Slow down as you approach a corner or turn. Once you have completed a turn, accelerate slowly. Be careful when passing parked cars. A driver might not see you and open a door in your path. Railroad crossings, streetcar rails, iron plates on road construction sites, and manhole covers be- come extremely slippery when wet. Slow down and cross them with caution. Keep the scooter up- right, otherwise it could slide out from under you. The brake pads or linings could get wet when you wash the scoot- er. After washing the scooter, check the brakes before riding.

UB5X10E0.book Page 5 Thursday, May 27, 2021 8:55 AM

2-5

ftermarket Tires and Rims

he tires and rims that came with your ooter were designed to match the

erformance capabilities and to pro- de the best combination of handling, raking, and comfort. Other tires, rims, zes, and combinations may not be ppropriate. Refer to page 8-20 for tire ecifications and more information on placing your tires.

ransporting the Scooter

e sure to observe following instruc- ons before transporting the scooter in nother vehicle. Remove all loose items from the

scooter. Point the front wheel straight

ahead on the trailer or in the truck bed, and choke it in a rail to pre- vent movement.

Secure the scooter with tie-downs or suitable straps that are at- tached to solid parts of the scoot- er, such as the frame or upper front fork triple clamp (and not, for example, to rubber-mounted han- dlebars or turn signals, or parts that could break). Choose the lo-

cation for the straps carefully so the straps will not rub against painted surfaces during transport.

The suspension should be com- pressed somewhat by the tie- downs, if possible, so that the scooter will not bounce exces- sively during transport.

Fu

2

UB5X10E0.book Page 6 Thursday, May 27, 2021 8:55 AM

Safety information

2-6

Always wear a helmet, gloves, trousers (tapered around the cuff and ankle so they do not flap), and a brightly colored jacket. Do not carry too much luggage on the scooter. An overloaded scoot- er is unstable. Use a strong cord to secure any luggage to the carri- er (if equipped). A loose load will affect the stability of the scooter and could divert your attention from the road. (See page 2-3.)

Description

3

EAU10411

L

4

56 1. 2. 3. 4. 5. 6. 7. 8.

8-10) age 8-10)

-14)

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

3-1

eft view

1

10 812 791113

2 3

Storage compartment A (page 5-18) Tool kit (page 8-2) Grab bar (page 7-3) Air filter element (page 8-15) Shock absorber assembly spring preload adjusting ring (page 5-23) Final transmission oil filler cap (page 8-13) Final transmission oil drain bolt (page 8-13) V-belt case air filter element (page 8-15)

9. Engine oil drain bolt (page 10.Engine oil filter element (p 11.Sidestand (page 5-24) 12.Spark plug (page 8-9) 13.Coolant reservoir (page 8

D

3

EAU10421

R

5,6

1. 2. 3. 4. 5. 6. 7. 8.

-10)

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

escription

3-2

ight view

2 3 41

9 8 7 Rear storage compartment (page 5-18) Fuel tank cap (page 5-15) Storage compartment B (page 5-18) Windshield (page 5-20) Battery (page 8-28) Fuses (page 8-30) Centerstand (page 8-26) Engine oil level check window (page 8-10)

9. Engine oil filler cap (page 8

Description

3

EAU10431

C

10

11

9

1. 2. 3. 4. 5. 6. 7. 8.

12)

23)

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

3-3

ontrols and instruments

12

1 2 3 875 64

Rear brake lever (page 5-12) Left handlebar switches (page 5-10) Rear brake fluid reservoir (page 8-23) Speedometer (page 5-2) Multi-function display (page 5-3) Tachometer (page 5-2) Front brake fluid reservoir (page 8-23) Right handlebar switches (page 5-10)

9. Front brake lever (page 5- 10.Throttle grip (page 8-19) 11.Main switch (page 4-7) 12.Auxiliary DC jack (page 5-

S

4

Sm Th op m an ca pa

TICE ECA24080

smart key system uses weak ra-

waves. The smart key system

y not work in the following situa-

s.

The smart key is placed in a lo-

cation exposed to strong radio

waves or other electromagnetic

noise

There are facilities nearby that

are emitting strong radio waves

(TV or radio towers, power

plants, broadcasting stations,

airports, etc.)

1. 2.

ehicle mounted antenna

1

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

mart key system

4-1

EAU76444

art key system e smart key system enables you to erate the vehicle without using a

echanical key. In addition, there is an swer-back function to help you lo- te the vehicle in a parking lot. (See ge 4-5.)

WARNING

EWA14704

Keep implanted pacemakers or

cardiac defibrillators, as well as

other electric medical devices

away from the vehicle mounted

antenna (see illustration).

Radio waves transmitted by the

antenna may affect the opera-

tion of such devices when close

by.

If you have an electric medical

device, consult a doctor or the

device manufacturer before us-

ing this vehicle.

NO

The

dio

ma

tion

Smart key Smart key button

1 2 1. Main switch

2. Main switch knob

2

1

1. V

Smart key system

4

In

k

th

n

e

T

T sm m u a th ke

EAU76453

erating range of the smart

y system e approximate operating range of smart key system is shown below.

he smart key is turned off, the vehi- will not recognize the smart key n if it is within operating range. If the art key battery is discharged, the

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

4-2

You are carrying or using com-

munication equipment such as

radios or mobile phones in

close proximity of the smart key

The smart key is in contact with

or covered by a metallic object

Other vehicles equipped with a

smart key system are nearby

such situations, move the smart

ey to another location and perform

e operation again. If it still does

ot work, operate the vehicle in

mergency mode. (See page 8-37.)

IP

o preserve vehicle battery power, the art key system turns off approxi-

ately 9 days after the vehicle was last sed (the answer-back function is dis- bled). In this situation, simply push e main switch knob to turn the smart y system back on.

EAU66881

Part 15 of FCC Rules This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interfer- ence, and (2) this device must accept any inter- ference, including interference that may cause undesired operation of this device.

FCC WARNING

Changes or modifications not express- ly approved by the party responsible for compliance could void the users authority to operate the equipment.

Op

ke Th the

If t cle eve sm

S

4

sm op sh

TI

WARNING

EWA17952

The smart key should be carried

with you. Do not store it on the

vehicle.

When the smart key is within

operating range, exercise due

care because other people not

carrying the smart key can start

the engine and operate the vehi-

cle.

luded with the vehicle is one smart , two mechanical keys, and one ntification number card. e vehicle battery is discharged, the chanical key can be used to open seat. Carry one mechanical key

ddition to the smart key.

e smart key is lost or the smart key tery has discharged, the identifica- number can be used to operate vehicle in emergency mode. (See e 8-37.) Write down the identifi-

ion number in case of emergen-

e smart key is lost and the smart system identification number is un- wn, the entire smart key system will

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

mart key system

4-3

art key system may not work or its erating range may become very ort.

P

Do not place the smart key in a storage compartment. Always carry the smart key with you. Turn the smart key off when leav- ing the vehicle.

EAU78624

Handling of the smart key and

mechanical keys

Inc key ide If th me the in a

If th bat tion the pag cat

cy.

If th key kno

1. Smart key 2. Mechanical key

1. Identification number card

1

868588

1

Smart key system

4

n c c

N

T

tr

lo

p

still does not operate, check the vehicle battery and then have a Yamaha dealer check the vehicle. If the smart key continually re- ceives radio waves, the smart key battery will discharge quickly. (For example, when placed in the vicin- ity of electrical products such as televisions, radios, or computers.) You can register up to six smart keys for the same vehicle. See a Yamaha dealer regarding spare smart keys. If a smart key is lost, contact a Yamaha dealer immediately to prevent the vehicle from being stolen.

UB5X10E0.book Page 4 Thursday, May 27, 2021 8:55 AM

4-4

eed to be replaced at considerable ost. Keep the identification number

ard in a safe place.

OTICE ECA21573

he smart key has precision elec-

onic components. Observe the fol-

wing precautions to prevent

ossible malfunction or damage.

Do not place or store the smart

key in a storage compartment.

The smart key may be damaged

from road vibrations or exces-

sive heat.

Do not drop, bend, or subject

the smart key to strong impacts.

Do not submerge the smart key

in water or other liquids.

Do not place heavy items or ex-

cessive stress on the smart key.

Do not leave the smart key in a

place exposed to direct sun-

light, high temperature or high

humidity.

Do not grind or attempt to mod-

ify the smart key.

Keep the smart key away from

strong magnetic fields and

magnetic objects such as key

holders, TVs, and computers.

Keep the smart key away from

electric medical equipment.

Do not allow oils, polishing

agents, fuel, or any strong

chemicals to come in contact

with the smart key. The smart

key body may become discol-

ored or cracked.

TIP

The smart key battery life is ap- proximately two years, but this may vary according to operating conditions.

Replace the smart key battery when the smart key system indi- cator light flashes for 20 seconds when the vehicle is turned on, or when the smart key indicator light does not come on when the smart key button is pushed. (See page 4-6.) After changing the smart key battery, if the smart key system

S

4

Sm

erating range of the answer-back

ction

approximate operating range of answer-back function is as shown.

the smart key system uses weak ra- waves, the operating range may be cted by the surrounding environ- nt.

turn the answer-back beeper on

ff

beeper, which sounds when the wer-back function is operated, can turned on or off according to the fol- ing procedure. Turn the smart key on and bring it within operating range.

1. 2.

~5m

UB5X10E0.book Page 5 Thursday, May 27, 2021 8:55 AM

mart key system

4-5

EAU76474

art key

WARNING

EWA17952

The smart key should be carried

with you. Do not store it on the

vehicle.

When the smart key is within

operating range, exercise due

care because other people not

carrying the smart key can start

the engine and operate the vehi-

cle.

To turn the smart key on or off

Push the smart key button for approxi- mately 1 second to turn the smart key on or off. When the smart key is turned off, the vehicle cannot be operated even if the smart key is within operating range. To operate the vehicle, turn the smart key on and bring it within operat- ing range.

To check whether the smart key is

turned on or off

Push the smart key button to confirm the current operating status of the smart key. If the smart key indicator light: Comes on quickly for 0.1 sec-

onds: The smart key is turned on. Comes on slowly for 0.5 seconds:

The smart key is turned off.

Remote answer-back function

Push the smart key button to operate the answer-back function remotely. The beeper will sound twice and all of the turn signal lights will flash twice. This feature is convenient for locating your vehicle in a parking lot and other areas.

Op

fun

The the

As dio affe me

To

or o

The ans be low

1.

Smart key indicator light Smart key button

1

2

Smart key system

4

Do not expose the battery to di-

rect sunlight or other heat

sources.

replace the smart key battery

. Open the smart key case as shown.

. Remove the battery.

attery

1

UB5X10E0.book Page 6 Thursday, May 27, 2021 8:55 AM

4-6

2. Turn the main switch to OFF, and then push the main switch knob once.

3. Within 9 seconds of pushing the knob, push and hold the knob again for 5 seconds.

4. When the beeper sounds, the set- ting is complete. If the beeper: Sounds twice: The beeper is

turned off. Sounds once: The beeper is

turned on.

EAU83293

Smart key battery

If the smart key system indicator light flashes for 20 seconds when the vehi- cle is first turned on, the smart key bat- tery is low and should be replaced. Also, if the answer-back function does not work or its operating range is very short, replace the battery soon.

WARNING

EWA14724

The battery and other remov-

able parts may cause injury if

swallowed. Keep the battery

and other removable parts away

from children.

To

1

2

1. Smart key system indicator light

1

1. B

S

4

TI

Di co

3

4

EAU76893

in switch

main switch is used to turn the ve- e power ON/OFF, lock/unlock the ering, and open the seat, fuel tank and storage compartment A. After

1.

ain switch ain switch knob

mart key system indicator light

2

1

1

UB5X10E0.book Page 7 Thursday, May 27, 2021 8:55 AM

mart key system

4-7

P

spose of the removed battery in ac- rdance with local regulations.

. Install a new battery as shown. Note the polarity of the battery.

. Gently snap the smart key case closed.

NOTICE ECA15785

Use a cloth when opening the

smart key case with a screw-

driver. Direct contact with hard

objects may damage or scratch

the smart key.

Take precautions to prevent the

waterproof seal from being

damaged or contaminated by

dirt.

Do not touch the internal cir-

cuits and terminals. This may

cause malfunctions.

Do not apply excessive force to

the smart key when replacing

the battery.

Make sure the battery is in-

stalled correctly. Confirm the di-

rection of the positive + side

of the battery.

Ma

The hicl ste lid

Specified battery: CR2032

Battery

1 1. M 2. M

1. S

Smart key system

4

p c ta tu c o

N

O

h

tr

w

a

T

D p a w d te sy o st m

T sc

If the vehicle battery voltage is low, the turn signal lights will not flash. See Emergency mode on page 8-37 for information on turning the vehicle power on without the smart key.

EAU76511

F

electrical systems are off.

turn the vehicle power off . With the smart key turned on and

within operating range, turn the main switch to OFF.

urn.

1

UB5X10E0.book Page 8 Thursday, May 27, 2021 8:55 AM

4-8

ushing the main switch knob and onfirmation with the smart key has ken place, the main switch can be rned while the smart key system indi-

ator light is on (approximately 4 sec- nds).

WARNING

EWA18720

ever turn the main switch to

FF, , or OPEN while the ve-

icle is moving. Otherwise the elec-

ical systems will be switched off,

hich may result in loss of control or

n accident.

IP

o not push the main switch knob re- eatedly or turn the main switch back nd forth beyond normal use. Other- ise, to protect the main switch from amage, the smart key system will mporarily disable and the smart key stem indicator light will flash. If this

ccurs, wait until the indicator light ops flashing before operating the ain switch again.

he main switch positions are de- ribed below.

EAU76502

ON

All electrical circuits are supplied with power, and the engine can be started.

To turn the vehicle power on 1. Turn the smart key on and bring it

within operating range. 2. Push the main switch knob and

the smart key indicator light will come on for approximately 4 sec- onds.

3. While the smart key system indi- cator light is on, turn the main switch to ON. All of the turn sig- nal lights will flash twice and the vehicle power will turn on.

TIP

OF

All

To 1

1. Push. 2. Turn.

1 2

1. T

S

4

2

TI

W O co sid tu se di

OP

Po Th ca

To open storage compartment A, push the LID button.

SEAT button

1

UB5X10E0.book Page 9 Thursday, May 27, 2021 8:55 AM

mart key system

4-9

. The turn signal lights flash once and the vehicle power turns off.

P

hen the main switch is turned to FF but the smart key cannot be nfirmed (the smart key is either out- e operation range or has been

rned off), the beeper will sound for 3 conds and the smart key system in- cator light will flash for 30 seconds.

During this 30 seconds, the main switch can be freely operated. After 30 seconds, the vehicle power will turn off automatically. To turn the vehicle power off im- mediately, push the main switch knob four times within 2 seconds.

EAU79042

EN (open)

wer is supplied to the main switch. e seat and storage compartment A n be opened.

To open the seat and storage compart- ment A

1. With the smart key turned on and within operating range, push the main switch knob.

2. While the smart key system indi- cator light is on, turn the main switch to OPEN.

3. To open the seat, push the SEAT button, and then lift the rear of the seat.

4.

1. Push. 2. Turn.

1 2

1.

Smart key system

4

T

M c fo

EAU76521

(lock)

e steering is locked and all electrical tems are off.

lock the steering . Turn the handlebar all the way to

the left. . With the smart key turned on and

within operating range, push the main switch knob.

. While the smart key system indi- cator light is on, push and turn the main switch to .

1.

1.

1

ush. ush and turn.

2

UB5X10E0.book Page 10 Thursday, May 27, 2021 8:55 AM

4-10

IP

ake sure that the seat and storage ompartment are securely closed be- re starting off.

Open position reminder

To prevent you from accidentally leav- ing the vehicle unlocked by walking away with the main switch still in the OPEN position, the smart key system beeper will sound under the following conditions. When the main switch has been in

the OPEN position for 3 minutes If the smart key is turned off while

the main switch is in the OPEN position

If you walk out of range of the smart key system with the main switch in the OPEN position

If the beeper sounds after 3 minutes, turn the main switch to OFF or . If the beeper sounds because the smart key was turned off or moved out of range, turn the smart key on and walk back into range.

TIP

The beeper will turn off after 1 minute.

The seat can also be opened with the mechanical key. (See page 5-18.)

Th sys

To 1

2

3

LID button

Storage compartment A

1

1. P 2. P

1

S

4

TI

If th

To

1

2

ke sure that fuel tank cap lid is se- ely closed before starting off.

1. 2.

1

UB5X10E0.book Page 11 Thursday, May 27, 2021 8:55 AM

mart key system

4-11

P

the steering will not lock, try turning e handlebar back to the right slightly.

unlock the steering

. With the smart key turned on and within operating range, push the main switch knob.

. While the smart key system indi- cator light is on, push and turn the main switch to the desired posi- tion.

EAU79000

(fuel tank cap lid)

To open the fuel tank cap lid

1. With the smart key turned on and within operating range, push the main switch knob.

2. While the smart key system indi- cator light is on, turn the main switch to .

To close the fuel tank cap lid Push the fuel tank cap lid down until it is closed.

TIP

Ma cur

Push. Push and turn.

2

1. Push. 2. Turn.

1 2

nd control functions

5

In

li

T

a

E c

WARNING

EWA16043

the ABS warning light does not

n off after reaching 10 km/h (6

/h), or if the warning light comes

while riding:

Use extra caution to avoid pos-

sible wheel lock during emer-

gency braking.

Have a Yamaha dealer check

the vehicle as soon as possible.

he engine is revved while the brakes applied or the vehicle is on its cen- stand (if equipped), the ABS warning t may come on. If this happens, turn vehicle power off and then back on

ain to reset the ABS warning light.

EAU78591

ction control system indicator

ht TCS

is indicator light will flash when trac- n control has engaged. he traction control system is turned , this indicator light will come on. e page 5-13.)

1. 2. 3. 4.

5. 6. 7.

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Instrument a

5-1

EAU4939P

dicator lights and warning

ghts

EAU11033

urn signal indicator lights

nd

ach indicator light will flash when its orresponding turn signal lights flash.

EAU11081

High beam indicator light

This indicator light comes on when the high beam of the headlight is switched on.

EAU77562

Engine trouble warning light

This warning light comes on if a prob- lem is detected in the engine or other vehicle control system. If this occurs, have a Yamaha dealer check the on- board diagnostic system.

TIP

When the vehicle is turned on, this light should come on for a few seconds and then go off. Otherwise, have a Yamaha dealer check the vehicle.

EAU78173

ABS warning light

This warning light comes on when the vehicle is first turned on, and goes off after starting riding. If the warning light comes on while riding, the anti-lock brake system may not work correctly.

If

tur

mi

on

TIP

If t are ter ligh the ag

Tra

lig

Th tio If t off (Se

Left turn signal indicator light Right turn signal indicator light High beam indicator light Anti-lock Brake System (ABS) warning light Engine trouble warning light Traction control system indicator light Smart key system indicator light

1 2

367 45

ABS

ABS

In

5

TI

W sh th on Ya

Sm

lig

Th st th m ind nic ke sm rie

TI

W sm sm pl en lig co sm

EAU63551

chometer

electric tachometer allows the rid- to monitor the engine speed and p it within the ideal power range. en the vehicle power is turned on, tachometer needle will sweep once oss the r/min range and then return ero r/min in order to test the electri- circuit.

TICE ECA10032

not operate the engine in the ta-

meter red zone.

zone: 9000 r/min and above

achometer achometer red zone

1

2

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-2

P

hen the vehicle is turned on, the light ould come on for a few seconds and en go off. If the light does not come , or if the light remains on, have a maha dealer check vehicle.

EAU78601

art key system indicator

ht

is indicator light communicates the atus of the smart key system. When e smart key system is operating nor- ally, this indicator light will be off. The icator light will flash when commu- ation between the vehicle and smart y takes place and when certain art key system operations are car- d out.

P

hile the vehicle is operating, if the art key cannot be detected (e.g. the art key fell to the ground, or is in a

ace with electromagnetic interfer- ce), the smart key system indicator ht will flash repeatedly. If this occurs, nfirm the location and status of the art key.

EAU63544

Speedometer

The speedometer shows the vehicles traveling speed. When the vehicle power is turned on, the speedometer needle will sweep once across the speed range and then return to zero in order to test the elec- trical circuit.

Ta

The er kee Wh the acr to z cal

NO

Do

cho

Red

1. Speedometer

1

1. T 2. T

nd control functions

5

M

B

m

m

s

o

a

T th sw

ck

e clock uses a 24-hour time system.

set the clock . Turn the main switch to OFF. . Push and hold the TRIP switch. . Turn the main switch to ON

while holding the TRIP switch, and then continue to hold the TRIP switch for eight seconds. The hour digits will start flashing.

. Use the TRIP switch to set the hours.

. Hold the TRIP switch for three seconds, and then release it. The minute digits will start flashing.

. Use the TRIP switch to set the minutes.

1. 2. 3. 4. 5. 6.

lock

1

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

Instrument a

5-3

EAU82302

ulti-function display

WARNING

EWA12423

e sure to stop the vehicle before

aking any setting changes to the

ulti-function meter unit. Changing

ettings while riding can distract the

perator and increase the risk of an

ccident.

he TRIP/INFO switch is located on e right side of the handlebar. This itch allows you to control or change

the settings of the multi-function meter unit. To use the TRIP switch, move the TRIP/INFO switch in direction (a). To use the INFO switch, move the TRIP/INFO switch in direction (b).

TIP

To switch the displays between kilo- meters and miles, turn the main switch to ON while holding the INFO switch, and then continue to hold the INFO switch for eight seconds.

Clo

Th

To 1 2 3

4

5

6

Fuel meter Information display Coolant temperature meter Clock Tripmeter display Icy road warning indicator

2

3

4

1

6

5

1. TRIP/INFO switch

1

(b)(a)

1. C

In

5

7

Fu

Th fu th to de th so

TI

TICE ECA10022

not continue to operate the en-

e if it is overheating.

If a problem is detected in the coolant temperature meter, all segments will flash repeatedly. If this occurs, have a Yamaha dealer check the vehicle as soon as pos- sible. The coolant temperature varies with changes in the weather and engine load.

meter display

1.

1

ripmeter display

1

UB5X10E0.book Page 4 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-4

. Hold the TRIP switch for three seconds, and then release it to start the clock.

el meter

e fuel meter indicates the amount of el in the fuel tank. The segments of e fuel meter disappear from F (full) wards E (empty) as the fuel level creases. When the last segment of e fuel meter starts flashing, refuel as on as possible.

P

If a problem is detected in the fuel meter, the all segments will flash repeatedly. If this occurs, have a Yamaha dealer check the vehicle.

When approximately 2.4 L (0.63 US gal, 0.53 Imp.gal) of fuel re- mains in the fuel tank, the last seg- ment of the fuel meter will start flashing. The display will automat- ically change to the fuel reserve tripmeter F Trip and start count- ing the distance traveled from that point.

Coolant temperature meter

The coolant temperature meter indi- cates the temperature of the coolant. If the top segment flashes, stop the ve- hicle, then stop the engine, and let the engine cool. (See page 8-36.)

NO

Do

gin

TIP

Trip

Fuel meter

1. Coolant temperature meter

1

1. T

nd control functions

5

T th

U d tr T a B

O V

O

T

T tr T e T in th

reset the time tripmeter, select it by ing the TRIP switch, and then hold TRIP switch for three seconds.

el reserve tripmeter F Trip

en approximately 2.4 L (0.63 US l, 0.53 Imp.gal) of fuel remains in the l tank, the last segment of the fuel ter will start flashing. The display l automatically change to the fuel re- ve tripmeter F Trip and start unting the distance traveled from t point. In this case, use the TRIP itch to cycle the display in the fol- ing order:

uel reserve tripmeter

1

UB5X10E0.book Page 5 Thursday, May 27, 2021 8:55 AM

Instrument a

5-5

he tripmeter display is equipped with e following: odometer tripmeter time tripmeter fuel reserve tripmeter oil change tripmeter V-belt replacement tripmeter se the TRIP switch to change the isplay between the odometer Odo, ipmeter Trip, time tripmeter Trip ime, oil change tripmeter Oil Trip, nd V-belt replacement tripmeter V- elt Trip in the following order:

do Trip Trip Time Oil Trip -Belt Trip Odo

dometer Odo and tripmeter

rip

he odometer shows the total distance aveled by the vehicle. he tripmeter shows the distance trav- led since it was last reset. o reset the tripmeter, select it by us- g the TRIP switch, and then hold e TRIP switch for three seconds.

TIP

The odometer will lock at 999999. The tripmeter will reset and con-

tinue counting after 9999.9 is reached.

Time tripmeter Time

The time tripmeter displays the time that has elapsed while the main switch was in the ON position since it was last reset. The maximum time that can be shown is 99:59.

TIP

To us the

Fu

Wh ga fue me wil ser co tha sw low

1. Time tripmeter

1 1. F

In

5

F To lec th se Th to ing

Oi

Th di ch

elt replacement tripmeter V-

t Trip

V-belt replacement tripmeter ws the distance traveled since the elt was last replaced. V-belt replacement indicator V- t will flash every 20000 km (12500 to indicate that the V-belt should be laced. r replacing the V-belt, reset the V-

t replacement indicator and the V- t replacement tripmeter. To reset m both, select the V-belt replace- nt tripmeter, and then hold the IP switch for three seconds.

1. 2.

1

-belt replacement indicator V-Belt -belt replacement tripmeter

2

UB5X10E0.book Page 6 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-6

Trip Oil Trip V-Belt Trip Odo Trip Trip Time F Trip reset the fuel reserve tripmeter, se- t it by using the TRIP switch, and

en hold the TRIP switch for three conds. e fuel reserve tripmeter will reset au- matically and disappear after refuel- and traveling 5 km (3 mi).

l change tripmeter Oil Trip

e oil change tripmeter shows the stance traveled since the oil was last anged.

The oil change indicator OIL flashes at the initial 1000 km (625 mi), then at 4000 km (2500 mi) and every 5000 km (3125 mi) thereafter to indicate that the engine oil should be changed. After changing the engine oil, reset the oil change indicator and the oil change tripmeter. To reset them both, select the oil change tripmeter, and then hold the TRIP switch for three seconds. While the oil change tripmeter is flash- ing, hold the TRIP switch for 15 to 20 seconds. Release the TRIP switch, and the oil trip value will reset to zero.

TIP

If the engine oil is changed before the oil change indicator comes on (i.e., be- fore the periodic oil change interval has been reached), the oil change tripmeter must be reset for the oil change indica- tor to come on at the correct time.

V-b

Bel

The sho V-b The Bel mi) rep Afte bel bel the me TR

Oil change indicator Oil Oil change tripmeter

2

1. V 2. V

1

nd control functions

5

W is 1 sw se

T

If b (i. m b se to

In

T w

When kilometers are selected as the display units, Consumption + Average MPG and Consump- tion MPG are not displayed. When miles are selected for the display units, Consumption + Av- erage km/L, Consumption + Av- erage L/100 km, Consumption km/L, and Consumption L/100 km are not displayed.

temperature display

is display shows the air temperature m 14 F to 122 F in 1 F increments.

1.

ir temperature display cy road warning indicator

1

UB5X10E0.book Page 7 Thursday, May 27, 2021 8:55 AM

Instrument a

5-7

hile the V-belt replacement tripmeter flashing, hold the TRIP switch for 5 to 20 seconds. Release the TRIP

itch, and the V-belt trip value will re- t to zero.

IP

the V-belt is replaced before the V- elt replacement indicator comes on e., before the periodic V-belt replace- ent interval has been reached), the V- elt replacement tripmeter must be re- t for the V-belt replacement indicator come on at the correct time.

formation display

he information display is equipped ith the following displays:

Air temperature Air-temp Battery voltage Battery Traction control system TCS ON

or TCSOFF Average fuel consumption Con-

sumption + Average km/L or Consumption + Average L/100 km or Consumption + Average MPG

Instantaneous fuel consumption Consumption km/L or Con- sumption L/100 km or Con- sumption MPG

Average speed Average Warning message function

Use the INFO switch to cycle be- tween the displays in the following or- der:

Air-temp Battery TCS ON or TC- SOFF Consumption + Average km/L Consumption + Average L/100 km Consumption + Average MPG Consumption km/L Consumption L/100 km Consumption MPG Av- erage Air-temp

TIP

Air

Th fro

Information display

1

1. A 2. I

2

In

5

Th fla F Th fro

TI

Th ing wh m na

Ba

Th st

nly TCS is displayed, there is a munication error within the vehi-

Have a Yamaha dealer check the icle as soon as possible.

rage fuel consumption display

s function calculates the average l consumption since it was last re- . average fuel consumption can be layed in km/L, L/100 km or G. Consumption/Average km/L: The average distance that can be traveled on 1.0 L of fuel is shown.

1.

verage fuel consumption display

1

UB5X10E0.book Page 8 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-8

e icy road warning indicator will sh when the temperature is below 38 . e temperature displayed may vary m the actual ambient temperature.

P

e accuracy of the temperature read- may be affected by engine heat en riding slowly (under 20 km/h [12

i/h]) or when stopped at traffic sig- ls, etc.

ttery voltage display

is display shows the current charge ate of the battery.

TIP

If the engine turns over slowly when using the start switch, have a Yamaha dealer charge the bat- tery.

If --- appears in the battery volt- age display, have a Yamaha deal- er check the battery.

Traction control system display

This display shows the current status of the traction control system. (See page 5-13.) TCS ON: the system is on TCSOFF: the system is off

TIP

If o com cle. veh

Ave

Thi fue set The disp MP

Battery voltage display

1

1. Traction control system display

1

1. A

nd control functions

5

T h th

T

A su th

Consumption MPG: The dis- tance that can be traveled on 1.0 US.gal of fuel under the current riding conditions is shown.

en traveling at speeds under 10 /h (6 mi/h), _ _._ is displayed.

erage speed display

e average speed Average kmh or verage MPH is displayed. e average speed is the total distance ided by the total time (with the main itch in the ON position) since the play was last reset to zero. is display shows the average speed ce it was last reset.

verage speed display

1

UB5X10E0.book Page 9 Thursday, May 27, 2021 8:55 AM

Instrument a

5-9

Consumption/Average L/100 km: The average amount of fuel necessary to travel 100 km is shown.

Consumption/Average MPG: The average distance that can be traveled on 1.0 US.gal of fuel is shown.

o reset the average fuel consumption, old the INFO switch for at least ree seconds.

IP

fter resetting the average fuel con- mption, _ _._ will be shown until e vehicle has traveled 1 km (0.6 mi).

Instantaneous fuel consumption

display

This function calculates the fuel con- sumption under current riding condi- tions. The instantaneous fuel consumption can be displayed as either Consump- tion km/L, Consumption L/100 km or Consumption MPG. Consumption km/L: The dis-

tance that can be traveled on 1.0 L of fuel under the current riding conditions is shown.

Consumption L/100 km: The amount of fuel necessary to travel 100 km under the current riding conditions is shown.

TIP

Wh km

Av

Th A Th div sw dis Th sin

1. Instantaneous fuel consumption display

1

1. A

In

5

To se an th

W

Th sa wa L m L as H m st pl en IC wa IC ro O ch If en ch m

EAU1234R

ndlebar switches

t

ht

immer/Pass switch / /PASS urn signal switch / orn switch

top/Run/Start switch / / azard switch

TRIP/INFO switch

1

2

3

1

2

3

UB5X10E0.book Page 10 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-10

reset the average speed display, lect it by using the INFO switch, d then hold the INFO switch for ree seconds.

arning message function

is function displays a warning mes- ge corresponding to the current rning.

FUEL: Appears when the last seg- ent of the fuel meter starts flashing. If FUEL is displayed, refuel as soon possible. TEMP: Appears when the top seg-

ent of the coolant temperature meter arts flashing. If H TEMP is dis- ayed, stop the vehicle, then stop the gine, and let the engine cool. E: Appears when the icy road rning indicator starts flashing. If E is displayed, be careful of icy

ads. IL SERV: Appears when the oil ange indicator OIL starts flashing. OIL SERV is displayed, change the gine oil, and then reset the oil ange indicator and oil change trip- eter.

V-BELT SERV: Appears when the V- belt replacement indicator V-Belt starts flashing. If V-BELT SERV is displayed, replace the V-belt, and then reset the V-belt replacement indicator and V-belt replacement tripmeter.

When there are two or more warnings, the warning messages are displayed in the following order:

L FUEL H TEMP ICE OIL SERV VBELT SERV L FUEL

Ha

Lef

Rig

1. D 2. T 3. H

1. S 2. H 3.

nd control functions

5

D

S b T sw h

T

T sw tu re te lig tu

H

P

EAU78491

RIP/INFO switch

is switch is used to make setting and play changes in the multi-function ter unit. See page 5-3 for more in- mation. use the TRIP switch, move the IP/INFO switch in direction (a). To

e the INFO switch, move the IP/INFO switch in direction (b).

TRIP/INFO switch

(b)(a)

UB5X10E0.book Page 11 Thursday, May 27, 2021 8:55 AM

Instrument a

5-11

EAU54203

immer/Pass switch / /PASS

et this switch to for the high eam and to for the low beam. o flash the high beam, push the

itch down towards PASS while the eadlights are on low beam.

EAU12461

urn signal switch /

o signal a right-hand turn, push this itch to . To signal a left-hand

rn, push this switch to . When leased, the switch returns to the cen- r position. To cancel the turn signal hts, push the switch in after it has re- rned to the center position.

EAU12501

orn switch

ress this switch to sound the horn.

EAU54213

Stop/Run/Start switch / /

To crank the engine with the starter, set this switch to , and then push the switch down towards . See page 7-2 for starting instructions prior to starting the engine. Set this switch to to stop the en- gine in case of an emergency, such as when the vehicle overturns or when the throttle cable is stuck.

EAU78190

Hazard switch

With the main switch in the ON or position, use this switch to turn on the hazard lights (simultaneous flashing of all turn signal lights). The hazard lights are used in case of an emergency or to warn other drivers when your vehicle is stopped where it might be a traffic hazard.

NOTICE ECA10062

Do not use the hazard lights for an

extended length of time with the en-

gine not running, otherwise the bat-

tery may discharge.

T

Th dis me for To TR us TR

1.

1

In

5

Fr

Th rig th th

EAU78201

S Yamaha ABS (Anti-lock Brake tem) features a dual electronic con- system, which acts on the front and r brakes independently. erate the brakes with ABS as you uld conventional brakes. If the ABS ctivated, a pulsating sensation may felt at the brake levers. In this situa- , continue to apply the brakes and the ABS work; do not pump the kes as this will reduce braking ef- tiveness.

WARNING

EWA16051

ays keep a sufficient distance

m the vehicle ahead to match the

ng speed even with ABS.

The ABS performs best with

long braking distances.

On certain surfaces, such as

rough or gravel roads, the brak-

ing distance may be longer with

the ABS than without.

ABS is monitored by an ECU, ich will revert the system to conven- al braking if a malfunction occurs.

1.

UB5X10E0.book Page 12 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-12

EAU12902

ont brake lever

e front brake lever is located on the ht side of the handlebar. To apply e front brake, pull this lever toward e throttle grip.

EAU12952

Rear brake lever

The rear brake lever is located on the left side of the handlebar. To apply the rear brake, pull this lever toward the handlebar grip.

AB The Sys trol rea Op wo is a be tion let bra fec

Alw

fro

ridi

The wh tion

Front brake lever

1

1. Rear brake lever

1

nd control functions

5

T

N

B

s

w

A

EAU78614

action control system e traction control system helps intain traction when accelerating on pery surfaces, such as unpaved or t roads. If sensors detect that the r wheel is starting to slip (uncon- lled spinning), the traction control tem assists by regulating engine

wer until traction is restored. en traction control has engaged, indicator light will flash. You

y notice changes in engine re- onse or exhaust sound.

WARNING

EWA18860

e traction control system is not a

bstitute for riding appropriately

the conditions. Traction control

nnot prevent loss of traction due

excessive speed when entering

ns, when accelerating hard at a

arp lean angle, or while braking,

d cannot prevent front wheel slip-

g. As with any vehicle, approach

rfaces that may be slippery with

ution and avoid especially slip-

ry surfaces.

UB5X10E0.book Page 13 Thursday, May 27, 2021 8:55 AM

Instrument a

5-13

IP

The ABS performs a self-diagnos- tic test each time the vehicle first starts off after the main switch is turned to ON and the vehicle has traveled at a speed of 10 km/h (6 mi/h) or higher. During this test, a clicking noise can be heard from the front of the vehicle, and if ei- ther brake lever is even slightly ap- plied, a vibration can be felt at the lever, but these do not indicate a malfunction.

This ABS has a test mode which allows the owner to experience the pulsation at the brake levers when the ABS is operating. How- ever, special tools are required, so please consult your Yamaha deal- er.

OTICE ECA20100

e careful not to damage the wheel

ensor or wheel sensor rotor; other-

ise, improper performance of the

BS will result.

Tr Th ma slip we rea tro sys po Wh the ma sp

Th

su

for

ca

to

tur

sh

an

pin

su

ca

pe

1. Front wheel sensor 2. Front wheel sensor rotor

1. Rear wheel sensor 2. Rear wheel sensor rotor

2

1

2

1

In

5

Se

W co To us inf tro FO di T

etting the traction control sys-

traction control system will auto- tically disable under certain condi- s; such as when a sensor fault is ected, or when only one wheel is al- ed to rotate for more than a few onds. Should this happen, the icator light will come on, and possi- the warning light, too.

en the vehicle is on the centerstand, not rev the engine for an extended iod of time. Otherwise, the traction trol system will automatically dis-

e and need to be reset.

1. 2.

raction control system indicator light ngine trouble warning light

2

UB5X10E0.book Page 14 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-14

tting the traction control system

hen the vehicle is turned on, traction ntrol is automatically turned on. turn the traction control system off, e the INFO switch to change the ormation display to the traction con- l system display. Then hold the IN- switch for three seconds. The

splay will show TCSOFF, and the CS indicator light will come on.

TIP

Turn the traction control system off to help free the rear wheel if the vehicle gets stuck in mud, sand, or other soft surfaces.

NOTICE ECA16801

Use only the specified tires. (See

page 8-20.) Using different sized

tires will prevent the traction control

system from controlling tire rotation

accurately.

Res

tem

The ma tion det low sec ind bly

TIP

Wh do per con abl

Traction control system indicator light Traction control system display

1 2

1. Traction control system indicator light 2. Traction control system display

1 2

1. T 2. E

1

nd control functions

5

If ic lo

T

If te ri e b

install the fuel tank cap

. Insert the fuel tank cap onto the tank opening and turn it clockwise until the install mark aligns with .

. Close the fuel tank cap lid.

uel tank cap elease mark

nstall mark

1

2

1

UB5X10E0.book Page 15 Thursday, May 27, 2021 8:55 AM

Instrument a

5-15

the traction control system automat- ally disables, try resetting it as fol- ws. 1. Stop the vehicle and turn it off

completely. 2. Wait a few seconds and then turn

the vehicle power on. 3. The indicator light should

turn off and the system be en- abled.

IP

the indicator light remains on af- r resetting, the vehicle may still be

dden; however, have a Yamaha deal- r check the vehicle as soon as possi- le.

4. Have a Yamaha dealer check the vehicle and turn off the warning light.

EAU78502

Fuel tank cap

To remove the fuel tank cap

1. Turn the main switch to to open the fuel tank cap lid.

2. Turn the fuel tank cap counter- clockwise until the release mark aligns with , and then pull the cap off.

To

1

2

1. Fuel tank cap lid

1 1. F 2. R

1. I

In

5

M

pr

Le

Wipe up any spilled fuel immedi- ately. NOTICE: Immediately

wipe off spilled fuel with a clean,

dry, soft cloth, since fuel may

deteriorate painted surfaces or

plastic parts. [ECA10072]

Be sure to securely close the fuel tank cap.

WARNING

EWA15152

soline is poisonous and can

se injury or death. Handle gaso-

with care. Never siphon gasoline

mouth. If you should swallow

e gasoline or inhale a lot of gas-

e vapor, or get some gasoline in

r eyes, see your doctor immedi-

uel tank filler tube aximum fuel level

1 2

UB5X10E0.book Page 16 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-16

WARNING

EWA11092

ake sure that the fuel tank cap is

operly closed after filling fuel.

aking fuel is a fire hazard.

EAU13213

Fuel Make sure there is sufficient gasoline in the tank.

WARNING

EWA10882

Gasoline and gasoline vapors are

extremely flammable. To avoid fires

and explosions and to reduce the

risk of injury when refueling, follow

these instructions.

1. Before refueling, turn off the en- gine and be sure that no one is sit- ting on the vehicle. Never refuel while smoking, or while in the vi- cinity of sparks, open flames, or other sources of ignition such as the pilot lights of water heaters and clothes dryers.

2. Do not overfill the fuel tank. Stop filling when the fuel reaches the bottom of the filler tube. Because fuel expands when it heats up, heat from the engine or the sun can cause fuel to spill out of the fuel tank.

3.

4.

Ga

cau

line

by

som

olin

you

1. F 2. M

nd control functions

5

a

w

lin

y

N

U

o

d

s

a

Y si lin [(R o kn g

EAU58301

el tank overflow hose

fore operating the vehicle: Check the fuel tank overflow hose connection and routing. Check the fuel tank overflow hose for cracks or damage, and replace it if necessary. Make sure that the fuel tank over- flow hose is not blocked, and clean it if necessary.

uel tank overflow hose

1 1

UB5X10E0.book Page 17 Thursday, May 27, 2021 8:55 AM

Instrument a

5-17

tely. If gasoline spills on your skin,

ash with soap and water. If gaso-

e spills on your clothing, change

our clothes.

EAU36086

OTICE ECA11401

se only unleaded gasoline. The use

f leaded gasoline will cause severe

amage to internal engine parts,

uch as the valves and piston rings,

s well as to the exhaust system.

our Yamaha engine has been de- gned to use regular unleaded gaso- e with a pump octane number +M)/2] of 86 or higher, or a research

ctane number of 91 or higher. If ocking (or pinging) occurs, use a

asoline of a different brand or premi-

um unleaded fuel. Use of unleaded fuel will extend spark plug life and reduce maintenance costs. Gasohol

There are two types of gasohol: gaso- hol containing ethanol and that con- taining methanol. Gasohol containing ethanol can be used if the ethanol con- tent does not exceed 10% (E10). Gas- ohol containing methanol is not recommended by Yamaha because it can cause damage to the fuel system or vehicle performance problems.

Fu

Be

Recommended fuel Regular unleaded gasoline (E10 ac- ceptable)

Fuel tank capacity: 13 L (3.4 US gal, 2.9 Imp.gal) 1. F

In

5

C Th co em

Th

er

bu

Storage compartment A must be opened using the smart key sys- tem. (See page 4-9.) The seat/rear storage compart- ment can be opened using the smart key system or the mechani- cal key. Some helmets cannot be stored in the rear storage compartment be- cause of their size or shape.

rage compartment A

open storage compartment A, turn main switch to OPEN and then h the LID button. close storage compartment A, push storage compartment lid until it is sed.

rage compartment B

open storage compartment B, push storage compartment lid inward to ock it, and then pull to open.

UB5X10E0.book Page 18 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-18

EAU13435

atalytic converter e exhaust system contains catalytic nverter(s) to reduce harmful exhaust issions.

WARNING

EWA10863

e exhaust system is hot after op-

ation. To prevent a fire hazard or

rns:

Do not park the vehicle near

possible fire hazards such as

grass or other materials that

easily burn.

Park the vehicle in a place

where pedestrians or children

are not likely to touch the hot

exhaust system.

Make sure that the exhaust sys-

tem has cooled down before

doing any maintenance work.

Do not allow the engine to idle

more than a few minutes. Long

idling can cause a build-up of

heat.

EAU78514

Storage compartments

This model is equipped with 3 storage compartments. The front storage com- partments and rear storage compart- ment are located as shown.

TIP

Sto

To the pus To the clo

Sto

To the unl

1. Storage compartment A 2. Storage compartment B

1. Rear storage compartment

2

1

1

nd control functions

5

T th o

S

T p T th

T p

sure to close the seat and all stor- e compartments before starting off.

TICE ECA24020

ke sure that the keyhole cover is

talled when the mechanical key is

t being used.

TICE ECA21150

ep the following points in mind

en using the storage compart-

nt.

Since the storage compartment

accumulates heat when ex-

posed to the sun and/or the en-

gine heat, do not store anything

susceptible to heat, consum-

ables or flammable items inside

it.

To avoid humidity from spread-

ing through the storage com-

partment, wrap wet articles in a

plastic bag before storing them

in the compartment.

1. 2.

UB5X10E0.book Page 19 Thursday, May 27, 2021 8:55 AM

Instrument a

5-19

o close storage compartment B, push e storage compartment lid into the

riginal position.

eat/rear storage compartment

o open the seat/rear storage com- artment via the main switch urn the main switch to OPEN, and en push the SEAT button.

o open the seat/rear storage com- artment with the mechanical key 1. Open the keyhole cover.

2. Insert the mechanical key into the seat lock, and then turn it clock- wise.

TIP

Be ag

NO

Ma

ins

no

NO

Ke

wh

me

Lid Storage compartment

1

2

1. Keyhole cover

1. Seat lock 2. Unlock.

1

12

In

5

Remove the windshield by remov- ing the bolts.

Remove the bolts, and then install the bolts in the desired position.

uick fastener olt access cover

olt

1

1

1

UB5X10E0.book Page 20 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-20

Since the storage compartment

may get wet while the vehicle is

being washed, wrap any articles

stored in the compartment in a

plastic bag.

Do not keep anything valuable

or breakable in the storage

compartment.

WARNING

EWA18950

Do not exceed the load limit of

1.0 kg (2.2 lb) for storage com-

partment A.

Do not exceed the load limit of

0.5 kg (1.1 lb) for storage com-

partment B.

Do not exceed the load limit of

5.0 kg (11 lb) for the rear storage

compartment.

Do not exceed the maximum

load of 161 kg (355 lb) for the ve-

hicle.

EAU78521

Windshield To suit the riders preference, the wind- shield height can be changed to one of two positions.

To change the windshield height to

the high position

1. Remove the bolt access covers by removing the quick fasteners.

2.

3.

1. Windshield

1

1. Q 2. B

1. B

2

nd control functions

5

change the windshield height to

low position

. Remove the bolt access covers by removing the quick fasteners.

. Remove the windshield by remov- ing the bolts.

. Remove the bolts, and then install the bolts in the desired position.

1.

1.

olt access cover

1

UB5X10E0.book Page 21 Thursday, May 27, 2021 8:55 AM

Instrument a

5-21

4. Install the windshield to the high position by installing the bolts, and then tighten the bolts to the spec- ified torque. WARNING! A loose

windshield could cause an acci-

dent. Be sure to tighten the

screws to the specified torque.

[EWA15511]

5. Place the bolt access covers, and then install the quick fasteners.

To

the

1

2

3

Bolt

Bolt

1 1

1

1 1. Bolt

Tightening torque: Windshield bolt:

8 Nm (0.8 kgfm, 5.9 lbft)

1

1 1. B

In

5

4

EAU46833

ndlebar position handlebar can be adjusted to one wo positions to suit the riders pref- nce. Have a Yamaha dealer adjust position of the handlebar.

1.

1.

andlebar 1

UB5X10E0.book Page 22 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-22

. Install the windshield to the low position by installing the bolts, and then tighten the bolts to the spec- ified torque. WARNING! A loose

windshield could cause an acci-

dent. Be sure to tighten the

screws to the specified torque.

[EWA15511]

5. Place the bolt access covers, and then install the quick fasteners.

Ha The of t ere the

Bolt

Bolt

1

1

1

1

1. Bolt

Tightening torque: Windshield bolt:

8 Nm (0.8 kgfm, 5.9 lbft)

1

1

1. H

nd control functions

5

A

a

A

a

h

s

E e in

N

T

d

m

A T to T to

EAUN3360

wer outlet is model is equipped with a 12V DC wer outlet.

TICE ECAN0140

not use the power outlet when

engine is off, and do not exceed

specified electrical load; other-

se the fuse may blow or the bat-

y may discharge.

en washing the vehicle, do not di-

t high-pressure washers at the

wer outlet area.

ower outlet

aximum electrical load: 12 W (1 A)

1

UB5X10E0.book Page 23 Thursday, May 27, 2021 8:55 AM

Instrument a

5-23

EAU14895

djusting the shock absorber

ssemblies

WARNING

EWA10211

lways adjust both shock absorber

ssemblies equally, otherwise poor

andling and loss of stability may re-

ult.

ach shock absorber assembly is quipped with a spring preload adjust- g ring.

OTICE ECA10102

o avoid damaging the mechanism,

o not attempt to turn beyond the

aximum or minimum settings.

djust the spring preload as follows. urn the adjusting ring in direction (a) increase the spring preload.

urn the adjusting ring in direction (b) decrease the spring preload. Align the appropriate notch in the

adjusting ring with the position in- dicator on the shock absorber.

Use the spring preload adjusting tool included in the kit to make this adjustment.

Po Th po

NO

Do

the

the

wi

ter

Wh

rec

po

1. Spring preload adjusting ring 2. Special wrench 3. Position indicator

Spring preload setting: Minimum (soft):

1 Standard:

3 Maximum (hard):

5

1 2 3 4 5

2 1 (a) (b)

3

1. P

M

In

5

To

1 2

3 4 5

6

7

TI

W ce po

EAU15306

estand sidestand is located on the left of the frame. Raise the sidestand

ower it with your foot while holding vehicle upright.

built-in sidestand switch is part of ignition circuit cut-off system, ich cuts the ignition in certain situa- s. (See the following section for an lanation of the ignition circuit cut- system.)

WARNING

EWA10242

vehicle must not be ridden with

sidestand down, or if the side-

nd cannot be properly moved up

does not stay up), otherwise the

estand could contact the ground

distract the operator, resulting

a possible loss of control.

ahas ignition circuit cut-off

tem has been designed to assist

operator in fulfilling the respon-

ility of raising the sidestand be-

e starting off. Therefore, check

1.

UB5X10E0.book Page 24 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-24

use the power outlet

. Turn the vehicle power off.

. Open the storage compartment A. (See page 5-18.)

. Remove the power outlet cap.

. Turn the accessory off.

. Insert the accessory plug into the power outlet.

. Turn the vehicle power on and start the engine.

. Turn the accessory on.

P

hen finished riding, turn off the ac- ssory and disconnect it from the wer outlet, and then install the cap.

WARNING

EWAN0050

To prevent electrical shock or short-

circuiting, install the cap when the

power outlet is not in use.

Sid The side or l the

TIP

The the wh tion exp off

The

the

sta

(or

sid

and

in

Yam

sys

the

sib

for

Power outlet cap

1

nd control functions

5

th

Y

fu

UB5X10E0.book Page 25 Thursday, May 27, 2021 8:55 AM

Instrument a

5-25

is system regularly and have a

amaha dealer repair it if it does not

nction properly.

EAUT1098

Ignition circuit cut-off system Check the operation of the sidestand switch according to the following pro- cedure.

In

5

placed on the spection.

, have the vehicle

UB5X10E0.book Page 26 Thursday, May 27, 2021 8:55 AM

strument and control functions

5-26

Turn the main switch on.

Put the sidestand up.

Push the start switch while applying either of the brake levers. The engine will start.

Put the sidestand down.

If the engine stalls:

The sidestand switch is OK.

Place vehicle on centerstand. WARNING

The vehicle must be centerstand during this in If a malfunction is found inspected before riding.

re-operation checks

6

EAU1559B

In ndition. Always follow the inspection a

EWA11152

F accident or equipment damage.

D ted by the procedures provided in

th

B

PAGE

F

nd check 5-16, 5-17

E 8-10

F 8-13

C 8-14

F 8-22, 8-23, 8-23

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

For your safety p

6-1

spect your vehicle each time you use it to make sure the vehicle is in safe operating co nd maintenance procedures and schedules described in the Owners Manual.

WARNING

ailure to inspect or maintain the vehicle properly increases the possibility of an

o not operate the vehicle if you find any problem. If a problem cannot be correc

is manual, have the vehicle inspected by a Yamaha dealer.

efore using this vehicle, check the following points:

ITEM CHECKS

uel

Check fuel level in fuel tank. Refuel if necessary. Check fuel line for leakage. Check fuel tank overflow hose for obstructions, cracks or damage, a

hose connection.

ngine oil

Check oil level in engine. If necessary, add recommended oil to specified level. Check vehicle for oil leakage.

inal transmission oil Check vehicle for oil leakage.

oolant

Check coolant level in reservoir. If necessary, add recommended coolant to specified level. Check cooling system for leakage.

ront brake

Check operation. If soft or spongy, have Yamaha dealer bleed hydraulic system. Check brake pads for wear. Replace if necessary. Check fluid level in reservoir. If necessary, add specified brake fluid to specified level. Check hydraulic system for leakage.

F

6

R 8-22, 8-23, 8-23

T ricate ca- 8-19, 8-25

C 8-25

W 8-20, 8-22

B 8-26

C 8-26

C

In

a

S 5-24

PAGE

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

or your safety pre-operation checks

6-2

ear brake

Check operation. If soft or spongy, have Yamaha dealer bleed hydraulic system. Check brake pads for wear. Replace if necessary. Check fluid level in reservoir. If necessary, add specified brake fluid to specified level. Check hydraulic system for leakage.

hrottle grip

Make sure that operation is smooth. Check throttle grip free play. If necessary, have Yamaha dealer adjust throttle grip free play and lub

ble and grip housing.

ontrol cables Make sure that operation is smooth. Lubricate if necessary.

heels and tires

Check for damage. Check tire condition and tread depth. Check air pressure. Correct if necessary.

rake levers Make sure that operation is smooth. Lubricate lever pivoting points if necessary.

enterstand, sidestand Make sure that operation is smooth. Lubricate pivots if necessary.

hassis fasteners Make sure that all nuts, bolts and screws are properly tightened. Tighten if necessary.

struments, lights, signals

nd switches

Check operation. Correct if necessary.

idestand switch Check operation of ignition circuit cut-off system. If system is not working correctly, have Yamaha dealer check vehicle.

ITEM CHECKS

portant riding points

7

R b th u

F

th

tr

o

00 km (1000 mi) and beyond

e vehicle can now be operated nor- lly.

TICE ECA10311

Keep the engine speed out of

the tachometer red zone.

If any engine trouble should oc-

cur during the engine break-in

period, immediately have a

Yamaha dealer check the vehi-

cle.

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Operation and im

7-1

EAU15952

ead the Owners Manual carefully to ecome familiar with all controls. If ere is a control or function you do not

nderstand, ask your Yamaha dealer.

WARNING

EWA10272

ailure to familiarize yourself with

e controls can lead to loss of con-

ol, which could cause an accident

r injury.

EAU16842

Engine break-in There is never a more important period in the life of your engine than the period between 0 and 1600 km (1000 mi). For this reason, you should read the fol- lowing material carefully. Since the engine is brand new, do not put an excessive load on it for the first 1600 km (1000 mi). The various parts in the engine wear and polish themselves to the correct operating clearances. During this period, prolonged full-throt- tle operation or any condition that might result in engine overheating must be avoided.

EAU34323

01000 km (0600 mi)

Avoid prolonged operation above 4500 r/min. NOTICE: After 1000 km (600

mi) of operation, be sure to replace

the engine oil, final transmission oil

and the oil filter element. [ECA12932]

10001600 km (6001000 mi)

Avoid prolonged operation above 5400 r/min.

16

Th ma

NO

O

7

St

N

Se

st

hi

In sy st

1

TI

Th an tra hig

EAU78221

s model is equipped with a lean an- sensor to stop the engine in case of urnover. In this case, the engine ble warning light will come on but is not a malfunction. Before re- rting the engine, turn the main tch off and then back on to reset the ine trouble warning light. Failing to so will prevent the engine from

rting even though the engine will nk when pushing the start switch.

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

peration and important riding points

7-2

EAU78231

arting the engine

OTICE ECA10251

e page 7-1 for engine break-in in-

ructions prior to operating the ve-

cle for the first time.

order for the ignition circuit cut-off stem to enable starting, the side- and must be up. (See page 5-25.) . Turn the main switch on and make

sure that the stop/run/start switch is set to . The following warning lights and indicator lights should come on for a few seconds, then go off. Engine trouble warning light Traction control system indi-

cator light Smart key system indicator

light

P

e ABS warning light should come on d stay on until the vehicle reaches a veling speed of 10 km/h (6 mi/h) or her.

NOTICE ECA22510

If a warning or indicator light does

not work as described above, see

page 5-1 for the corresponding

warning and indicator light circuit

check.

2. Close the throttle. 3. While applying the front or rear

brake, push the side of the stop/run/start switch. Release it when the engine starts.

TIP

If the engine does not start, release the start switch after 5 seconds. Before pressing the start switch again, wait 10 seconds to allow battery voltage to re- store.

NOTICE ECA11043

For maximum engine life, never ac-

celerate hard when the engine is

cold!

TIP

Thi gle a t trou this sta swi eng do sta cra

portant riding points

7

S EAU60650

aking

WARNING

EWA17790

Avoid braking hard or suddenly

(especially when leaning over to

one side), otherwise the vehicle

may skid or overturn.

Railroad crossings, streetcar

rails, iron plates on road con-

struction sites, and manhole

covers become extremely slip-

pery when wet. Therefore, slow

down when approaching such

areas and cross them with cau-

tion.

Keep in mind that braking on a

wet road is much more difficult.

Ride slowly down a hill, as brak-

ing downhill can be very diffi-

cult.

. Close the throttle completely.

. Apply both front and rear brakes simultaneously while gradually in- creasing the pressure.

1.

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

Operation and im

7-3

EAU45093

tarting off 1. While pulling the rear brake lever

with your left hand and holding the grab bar with your right hand, push the scooter off the center- stand.

2. Sit astride the seat, and then ad- just the rear view mirrors.

3. Switch the turn signals on. 4. Check for oncoming traffic, and

then slowly turn the throttle grip (on the right) in order to take off.

5. Switch the turn signals off.

EAU16782

Acceleration and deceleration

The speed can be adjusted by opening and closing the throttle. To increase the speed, turn the throttle grip in di- rection (a). To reduce the speed, turn the throttle grip in direction (b).

Br

1 2

Grab bar

1

(b)

(a)

ZAUM0199

O

7

Ti

su Fu yo ing

WARNING

EWA10312

Since the engine and exhaust

system can become very hot,

park in a place where pedestri-

ans or children are not likely to

touch them and be burned.

Do not park on a slope or on soft

ground, otherwise the vehicle

may overturn, increasing the

risk of a fuel leak and fire.

Do not park near grass or other

flammable materials which

might catch fire.

UB5X10E0.book Page 4 Thursday, May 27, 2021 8:55 AM

peration and important riding points

7-4

EAU16821

ps for reducing fuel con-

mption el consumption depends largely on ur riding style. Consider the follow- tips to reduce fuel consumption:

Avoid high engine speeds during acceleration. Avoid high engine speeds with no load on the engine. Turn the engine off instead of let- ting it idle for an extended length of time (e.g., in traffic jams, at traf- fic lights or at railroad crossings).

EAUN1421

Parking When parking, turn the vehicle power off, and then turn the smart key off.

TIP

Even when the vehicle is parked in a lo- cation partitioned by a fence or the glass window of a shop, if the smart key is within operating range, other people will be able to start the engine and operate the vehicle. Please turn the smart key off when leaving the ve- hicle. (See page 4-5.)

If the sidestand is lowered when the engine is running, the engine will stop and the beeper will sound for approxi- mately 1 minute. To stop the beeper, turn the vehicle power off or raise the sidestand.

TIP

Before leaving the vehicle, be sure to turn the main switch to OFF or . Otherwise, the battery may discharge.

The sidestand alarm beeper can be set to not activate. Please con- tact your Yamaha dealer.

ance and adjustment

8

P lu sa p ve p a p T m c n p g th b

F

c

ti

yo

s

y

v

s

EAU17303

ission controls not only function to sure cleaner air, but are also vital to per engine operation and maximum

rformance. In the following periodic intenance charts, the services relat- to emissions control are grouped arately. These services require

ecialized data, knowledge, and uipment. Maintenance, replace- nt, or repair of the emission control vices and systems may be per- med by any repair establishment or ividual that is certified (if applicable). maha dealers are trained and uipped to perform these particular vices.

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-1

EAU17246

eriodic inspection, adjustment, and brication will keep your vehicle in the fest and most efficient condition

ossible. Safety is an obligation of the hicle owner/operator. The most im-

ortant points of vehicle inspection, djustment, and lubrication are ex- lained on the following pages. he intervals given in the periodic aintenance charts should be simply

onsidered as a general guide under ormal riding conditions. However, de- ending on the weather, terrain, geo- raphical location, and individual use, e maintenance intervals may need to e shortened.

WARNING

EWA10322

ailure to properly maintain the vehi-

le or performing maintenance ac-

vities incorrectly may increase

ur risk of injury or death during

ervice or while using the vehicle. If

ou are not familiar with vehicle ser-

ice, have a Yamaha dealer perform

ervice.

WARNING

EWA15123

Turn off the engine when performing

maintenance unless otherwise

specified.

A running engine has moving

parts that can catch on body

parts or clothing and electrical

parts that can cause shocks or

fires.

Running the engine while ser-

vicing can lead to eye injury,

burns, fire, or carbon monoxide

poisoning possibly leading to

death. See page 2-3 for more in-

formation about carbon monox-

ide.

WARNING

EWA15461

Brake discs, calipers, drums, and

linings can become very hot during

use. To avoid possible burns, let

brake components cool before

touching them.

Em en pro pe ma ed sep sp eq me de for ind Ya eq ser

P

8

To

Th Th an int m m wr to co

TI

If en yo

1.

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-2

EAU85230

ol kit

e tool kit is in the location shown. e information included in this manual d the tools provided in the tool kit are ended to assist you in the perfor- ance of preventive maintenance and inor repairs. However, a torque ench and other tools are necessary perform certain maintenance work rrectly.

P

you do not have the tools or experi- ce required for a particular job, have ur Yamaha dealer perform it for you.

Tool kit

1

ance and adjustment

8

EAU48491

T

ting from 8000 mi (13000 km) or 12

e a Yamaha dealer perform the ser-

EAU17602

P

N

OMETER READINGS

i

)

hs

12000 mi

(19000 km)

or

18 months

16000 mi

(25000 km)

or

24 months

20000 mi

(31000 km)

or

30 months

1

2

00 mi (19000 km)

3 00 mi (19000 km)

4

5

6 00 mi (19000 km)

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-3

IP

From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals star months.

Items marked with an asterisk require special tools, data and technical skills, hav vice.

eriodic maintenance chart for the emission control system

o. ITEM ROUTINE

INITIAL OD

600 mi

(1000 km)

or

1 month

4000 mi

(7000 km)

or

6 months

8000 m

(13000 km

or

12 mont

* Fuel line

Check fuel hoses for cracks or damage.

Replace if necessary.

* Spark plug

Check condition. Adjust gap and clean.

Replace. Every 120

* Valve clearance Check and adjust. Every 120

* Fuel injection Check engine idle speed.

* Exhaust system

Check for leakage. Tighten if necessary. Replace gasket(s) if necessary.

* Evaporative emis-

sion control system

Check control system for dam- age.

Replace if necessary. Every 120

P

8

EAU67553

G

N

OMETER READINGS

)

s

12000 mi

(19000 km)

or

18 months

16000 mi

(25000 km)

or

24 months

20000 mi

(31000 km)

or

30 months

1

2 0 mi (19000 km)

3 0 mi (19000 km)

4 0 mi (19000 km)

5

6

7

8

9

y 4 years

10 y 2 years

11

UB5X10E0.book Page 4 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-4

eneral maintenance and lubrication chart

o. ITEM ROUTINE

INITIAL OD

600 mi

(1000 km)

or

1 month

4000 mi

(7000 km)

or

6 months

8000 mi

(13000 km

or

12 month

* Diagnostic system

check

Perform dynamic inspection us- ing Yamaha diagnostic tool.

Check the error codes.

* Air filter element Replace. Every 1200

* Pre air filter element Clean. Every 1200

* Sub air filter ele-

ment Replace. Every 1200

Air filter check hose Clean.

V-belt case air filter

element Clean.

* Front brake

Check operation, fluid level, and for fluid leakage.

Replace brake pads if necessary.

* Rear brake

Check operation, fluid level, and for fluid leakage.

Replace brake pads if necessary.

* Brake hoses

Check for cracks or damage. Check for correct routing and

clamping.

Replace. Ever

* Brake fluid Change. Ever

* Wheels Check runout and for damage. Replace if necessary.

ance and adjustment

8

1

1

1

00 mi (19000 km)

1

1

1

1

1

N

OMETER READINGS

i

)

hs

12000 mi

(19000 km)

or

18 months

16000 mi

(25000 km)

or

24 months

20000 mi

(31000 km)

or

30 months

UB5X10E0.book Page 5 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-5

2 * Tires

Check tread depth and for dam- age.

Replace if necessary. Check air pressure. Correct if necessary.

3 * Wheel bearings

Check bearings for smooth oper- ation.

Replace if necessary.

4 * Steering bearings

Check bearing assemblies for looseness.

Moderately repack with lithium- soap-based grease. Every 120

5 * Chassis fasteners

Check all chassis fitting and fas- teners.

Correct if necessary.

6 Front brake lever

pivot shaft Apply silicone grease lightly.

7 Rear brake lever

pivot shaft Apply silicone grease lightly.

8 Centerstand and

sidestand pivots

Check operation. Apply lithium-soap-based grease

lightly.

9 * Sidestand switch Check operation and replace if

necessary.

o. ITEM ROUTINE

INITIAL OD

600 mi

(1000 km)

or

1 month

4000 mi

(7000 km)

or

6 months

8000 m

(13000 km

or

12 mont

P

8

20

21

22

nge indicator flashes

23 y 12000 mi (19000 km)

24

y 3 years

25

y 12000 mi (19000 km)

26 acement indicator flashes

27

28

29

N

OMETER READINGS

)

s

12000 mi

(19000 km)

or

18 months

16000 mi

(25000 km)

or

24 months

20000 mi

(31000 km)

or

30 months

UB5X10E0.book Page 6 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-6

* Front fork

Check operation and for oil leak- age.

Replace if necessary.

* Shock absorber as-

semblies

Check operation and for oil leak- age.

Replace if necessary.

Engine oil

Check oil level and vehicle for oil leakage.

Change. When the oil cha

Engine oil filter ele-

ment Replace. Ever

* Cooling system

Check coolant level and vehicle for coolant leakage.

Change coolant. Ever

* Final transmission

oil

Check vehicle for oil leakage.

Change. Ever

* V-belt Replace. When the V-belt repl

* Front and rear

brake switches Check operation.

* Control cables Lubricate.

* Throttle grip

Check operation. Check throttle grip free play, and

adjust if necessary. Lubricate cable and grip housing.

o. ITEM ROUTINE

INITIAL OD

600 mi

(1000 km)

or

1 month

4000 mi

(7000 km)

or

6 months

8000 mi

(13000 km

or

12 month

ance and adjustment

8

EAU82340

T

annot be cleaned with compressed

r dusty conditions.

nd change the brake fluid every two

3

N

OMETER READINGS

i

)

hs

12000 mi

(19000 km)

or

18 months

16000 mi

(25000 km)

or

24 months

20000 mi

(31000 km)

or

30 months

UB5X10E0.book Page 7 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-7

IP

Engine air filter and V-belt air filter The engine air filter uses a disposable oil-coated paper element. This element c

air, it must be replaced. All filter elements must be serviced more frequently if you often ride in the rain o

Hydraulic brake service Regularly check the brake fluid levels and replenish the reservoirs as needed. Replace the internal components of the brake master cylinders and calipers, a

years. Replace the brake hoses every four years or sooner if cracked or damaged.

0 * Lights, signals and

switches

Check operation. Adjust headlight beam.

o. ITEM ROUTINE

INITIAL OD

600 mi

(1000 km)

or

1 month

4000 mi

(7000 km)

or

6 months

8000 m

(13000 km

or

12 mont

P

8

R

pa Th to jo th to

Pa

To Re pa sh

1.

UB5X10E0.book Page 8 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-8

EAU18752

emoving and installing the

nel e panel shown needs to be removed perform some of the maintenance bs described in this chapter. Refer to is section each time the panel needs be removed and installed.

EAU78530

nel A

remove the panel move the screws, and then pull the nel outward and slide it forward as own.

To install the panel Place the panel in the original position, and then install the screws.

Panel A

1

1. Screw

1. Panel A

1 1

1

ance and adjustment

8

C T c p d c it a n ti c T c sh id n d c a yo e If tr o

a torque wrench is not available en installing a spark plug, a good imate of the correct torque is 1/4 turn past finger tight. However, the

ark plug should be tightened to the ecified torque as soon as possible.

UB5X10E0.book Page 9 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-9

EAU19623

hecking the spark plug he spark plug is an important engine omponent, which should be checked eriodically, preferably by a Yamaha ealer. Since heat and deposits will ause any spark plug to slowly erode, should be removed and checked in ccordance with the periodic mainte- ance and lubrication chart. In addi- on, the condition of the spark plug an reveal the condition of the engine. he porcelain insulator around the enter electrode of the spark plug ould be a medium-to-light tan (the eal color when the vehicle is ridden ormally). If the spark plug shows a istinctly different color, the engine ould be operating improperly. Do not ttempt to diagnose such problems urself. Instead, have a Yamaha deal-

r check the vehicle. the spark plug shows signs of elec- ode erosion and excessive carbon or ther deposits, it should be replaced.

Before installing a spark plug, the spark plug gap should be measured with a wire thickness gauge and, if necessary, adjusted to specification.

Clean the surface of the spark plug gasket and its mating surface, and then wipe off any grime from the spark plug threads.

TIP

If wh est 1/2 sp sp

Specified spark plug: NGK/LMAR8A-9

1. Spark plug gap

Spark plug gap: 0.80.9 mm (0.0310.035 in)

Tightening torque: Spark plug:

13 Nm (1.3 kgfm, 9.6 lbft)

P

8

C

Th to int th fo

If the engine oil is below the mini- mum level mark, add sufficient oil of the recommended type to raise it to the correct level.

change the engine oil (with or

hout oil filter element replace-

nt)

Start the engine, warm it up for several minutes, and then turn it off. Place an oil pan under the engine to collect the used oil.

1. 2.

ngine oil level check window aximum level mark inimum level mark

3

1

2

UB5X10E0.book Page 10 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-10

EAU36113

anister

is model is equipped with a canister prevent the discharging of fuel vapor o the atmosphere. Before operating is vehicle, make sure to check the llowing:

Check each hose connection. Check each hose and canister for cracks or damage. Replace if damaged. Make sure that the canister breather is not blocked, and if necessary, clean it.

EAU79021

Engine oil and oil filter ele-

ment The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter ele- ment replaced at the intervals specified in the periodic maintenance and lubri- cation chart.

To check the engine oil level

1. Place the vehicle on a level sur- face and hold it in an upright posi- tion. A slight tilt to the side can result in a false reading.

2. Start the engine, warm it up for several minutes, and then turn it off.

3. Wait a few minutes for the oil level to settle for an accurate reading, and then check the oil level through the check window locat- ed at the bottom-right side of the crankcase.

TIP

The engine oil should be between the minimum and maximum level marks.

4.

To

wit

me

1.

2.

Canister Canister breather hose

2 1 1. E

2. M 3. M

ance and adjustment

8

. Remove and replace the oil filter element and O-ring.

. Install the oil filter element cover by installing the bolts, then tight- ening them to the specified torque.

ke sure that the O-ring is properly ted.

. Install the engine oil drain bolt and its new gasket, and then tighten the bolt to the specified torque.

1. 2.

il filter element -ring

ightening torque: Oil filter element cover bolt:

10 Nm (1.0 kgfm, 7.4 lbft)

1

2

UB5X10E0.book Page 11 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-11

3. Remove the engine oil filler cap and its O-ring, and then remove the engine oil drain bolt and its gasket to drain the oil from the crankcase.

4. Check the O-ring for damage, and replace it if necessary.

TIP

Skip steps 57 if the oil filter element is not being replaced.

5. Remove the oil filter element cover by removing the bolts.

6

7

TIP

Ma sea

8

Engine oil filler cap O-ring

1

2

1. Engine oil drain bolt 2. Gasket

1. Bolt 2. Oil filter element cover

12

2

1

1. O 2. O

T

P

8

9

TI

Be pa te

N

M

en

10

EAU85450

y Yamalube ALUBE oil is a Genuine YAMAHA

t born of the engineers passion belief that engine oil is an impor-

t liquid engine component. We form ms of specialists in the fields of me- nical engineering, chemistry, elec- ics and track testing, and have

m develop the engine together with oil it will use. Yamalube oils take full antage of the base oils qualities blend in the ideal balance of addi- s to make sure the final oil clears performance standards. Thus,

alube mineral, semisynthetic and thetic oils have their own distinct racters and value. Yamahas expe- ce gained over many years of re- rch and development into oil since 1960s helps make Yamalube the t choice for your Yamaha engine.

UB5X10E0.book Page 12 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-12

. Refill with the specified amount of the recommended engine oil.

P

sure to wipe off spilled oil on any rts after the engine and exhaust sys-

m have cooled down.

OTICE ECA24060

ake sure that no foreign material

ters the crankcase.

. Install and tighten the oil filler cap and its O-ring.

11. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause.

12. Turn the engine off, wait a few minutes for the oil level to settle for an accurate reading, and then check the oil level and correct it if necessary.

Wh YAM Par and tan tea cha tron the the adv and tive our Yam syn cha rien sea the bes

Tightening torque: Engine oil drain bolt:

20 Nm (2.0 kgfm, 15 lbft)

Recommended engine oil: See page 10-1.

Oil quantity: Oil change:

1.50 L (1.59 US qt, 1.32 Imp.qt) With oil filter removal:

1.60 L (1.69 US qt, 1.41 Imp.qt)

ance and adjustment

8

F T c ri Y sc si th m

. Install the final transmission oil drain bolt and its new gasket, and then tighten the bolt to the speci- fied torque.

. Refill with the specified amount of the recommended final transmis- sion oil. WARNING! Make sure

that no foreign material enters

the final transmission case.

Make sure that no oil gets on

the tire or wheel. [EWA11312]

. Install the final transmission oil fill- er cap and its new O-ring, and then tighten the oil filler cap.

. Check the final transmission case for oil leakage. If oil is leaking, check for the cause.

ightening torque: Final transmission oil drain bolt:

20 Nm (2.0 kgfm, 15 lbft)

ecommended final transmission il: See page 10-1.

il quantity: 0.20 L (0.21 US qt, 0.18 Imp.qt)

UB5X10E0.book Page 13 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-13

EAU20067

inal transmission oil he final transmission case must be hecked for oil leakage before each de. If any leakage is found, have a amaha dealer check and repair the ooter. In addition, the final transmis-

on oil must be changed as follows at e intervals specified in the periodic aintenance and lubrication chart. 1. Start the engine, warm up the final

transmission oil by riding the scooter for several minutes, and then stop the engine.

2. Place the scooter on the center- stand.

3. Place an oil pan under the final transmission case to collect the used oil.

4. Remove the final transmission oil filler cap and its O-ring from the fi- nal transmission case.

5. Remove the final transmission oil drain bolt and its gasket to drain the oil from the final transmission case.

6

7

8

9

1. Final transmission oil filler cap 2. O-ring

1. Final transmission oil drain bolt 2. Gasket

1

2

12

T

R o

O

P

8

C Th be an sp an

To

1

TI

2

TI

Th m

Remove the coolant reservoir cap, add coolant to the maximum level mark, and then install the reservoir cap. WARNING! Remove only

the coolant reservoir cap. Never

attempt to remove the radiator

cap when the engine is hot.

[EWA15162] NOTICE: If coolant is not

available, use distilled water or

soft tap water instead. Do not

use hard water or salt water

since it is harmful to the engine.

If water has been used instead

of coolant, replace it with cool-

ant as soon as possible, other-

wise the cooling system will not

be protected against frost and

corrosion. If water has been

oolant reservoir cover

1

UB5X10E0.book Page 14 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-14

EAU20071

oolant e coolant level should be checked fore each ride. In addition, the cool- t must be changed at the intervals ecified in the periodic maintenance d lubrication chart.

EAU78580

check the coolant level

. Place the vehicle on the center- stand.

P

The coolant level must be checked on a cold engine since the level varies with engine tem- perature. Make sure that the vehicle is posi- tioned straight up when checking the coolant level. A slight tilt to the side can result in a false reading.

. Check the coolant level through the check window.

P

e coolant should be between the inimum and maximum level marks.

3. If the coolant is at or below the minimum level mark, remove the left floorboard mat by pulling it up.

4. Remove the coolant reservoir cov- er.

5.

1. Coolant level check window 2. Maximum level mark 3. Minimum level mark

1. Floorboard mat

1

2 3

1

1. C

ance and adjustment

8

EAU78574

r filter and V-belt case air fil-

r elements e air filter element and the sub air fil- element should be replaced, and pre air filter element and the V-belt

se air filter element should be aned at the intervals specified in the riodic maintenance and lubrication art. Service the air filter elements re frequently if you are riding in un-

ually wet or dusty areas. The air filter eck hose must be frequently ecked and cleaned if necessary.

aning the air filter check hose 1.

ir filter check hose

1

UB5X10E0.book Page 15 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-15

added to the coolant, have a

Yamaha dealer check the anti-

freeze content of the coolant as

soon as possible, otherwise the

effectiveness of the coolant will

be reduced. [ECA10473]

6. Install the coolant reservoir cover. 7. Place the left floorboard mat in the

original position and push it down- ward to secure it.

EAU33032

Changing the coolant

The coolant must be changed at the in- tervals specified in the periodic main- tenance and lubrication chart. Have a Yamaha dealer change the coolant. WARNING! Never attempt to remove

the radiator cap when the engine is

hot. [EWA10382]

Ai

te Th ter the ca cle pe ch mo us ch ch

Cle Coolant reservoir cap

Coolant reservoir capacity (up to the maximum level mark):

0.18 L (0.19 US qt, 0.16 Imp.qt)

1

1. A

P

8

1

2

TI

If ho m re

Re

su

th

1

2

Insert a new sub air filter element into the air filter case cover. Insert a new air filter element into the air filter case. NOTICE: Make

sure that the air filter element is

properly seated in the air filter

ir filter element

ub air filter element ir filter case cover

1

2

UB5X10E0.book Page 16 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-16

. Check the hose on the rear side of the air filter case for accumulated dirt or water.

. If dirt or water is visible, remove the hose from the clamp, clean it, and then install it.

P

dirt or water was found in the check se, be sure to check the air filter ele- ent for excessive dirt or damage and place it if necessary.

placing the air filter element and

b air filter element and cleaning

e pre air filter element

. Place the vehicle on the center- stand.

. Remove the rubber plugs.

3. Remove the air filter case cover by removing the screws.

4. Pull the air filter element and sub air filter element out.

5.

6.

1. Rubber plug

1. Air filter case cover 2. Screw

1

1

2

22

2

1. A

1. S 2. A

1

ance and adjustment

8

. Install the rubber plugs.

aning the V-belt case air filter el-

ent

. Place the vehicle on the center- stand.

. Remove the air filter case cover. (See the previous section.)

. Remove the V-belt case cover screws.

1. 2.

ong screw

1

UB5X10E0.book Page 17 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-17

case. The engine should never

be operated without the air filter

element installed, otherwise the

piston(s) and/or cylinder(s) may

become excessively worn.

[ECA10482]

7. Pull the pre air filter element out, and then blow out the dirt with compressed air as shown.

8. Check the pre air filter element for damage, and replace it if neces- sary.

9. Insert the pre air filter element into the air filter case cover.

10. Install the air filter case cover by installing the screws.

TIP

The long screw should be installed as shown.

11

Cle

em

1

2

3 Pre air filter element Air filter case cover

1

2 1. L

P

8

4

5

Remove the air filter element, and then blow out the dirt with com- pressed air from the clean side as shown.

Check the V-belt case air filter ele- ment for damage and replace it if necessary.

1.

1.

1

-belt case air filter element

lean side

1

1

UB5X10E0.book Page 18 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-18

. Remove the air filter case bolts.

. Lift up the air filter case slightly, re- move the rear wheel sensor lead from the holder, and then remove the V-belt case cover.

6. Remove the V-belt case air filter cover by removing the bolts.

7.

8.

Screw

Bolt

1

1

1. Rear wheel sensor lead 2. Lead holder

1. V-belt case air filter cover 2. Bolt

1

2 2

1

2

2 1. V

1. C

ance and adjustment

8

1

1

1

1

EAU21386

ecking the throttle grip free

y asure the throttle grip free play as

own.

riodically check the throttle grip free y and, if necessary, have a Yamaha aler adjust it.

1. 2. 3.

hrottle grip free play

hrottle grip free play: 3.05.0 mm (0.120.20 in)

1

UB5X10E0.book Page 19 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-19

9. Insert the element into the V-belt case.

0. Install the V-belt case air filter cov- er by installing the bolts.

1. Install the rear wheel sensor lead into the holder at the white tape on the lead as shown.

2. Install the air filter case bolts, and then tighten the bolts to the spec- ified torque.

3. Install the V-belt case cover by in- stalling the screws.

14. Install the air filter case cover by installing the screws. Ch

pla Me sh

Pe pla de

Rear wheel sensor lead White tape Lead holder

Tightening torque: Bolt:

10 Nm (1.0 kgfm, 7.4 lbft)

1

3 3

2 2

3

2 2

3

1. T

T

P

8

Va Th co ch ch sp ch im no To yo th

TI

Th th

weight of rider, passenger, car-

go, and accessories approved

for this model.

WARNING

EWA10512

ver overload your vehicle. Opera-

of an overloaded vehicle could

se an accident.

old tire air pressure: Up to 90 kg (198 lb) load:

Front: 200 kPa (2.00 kgf/cm2, 29 psi)

Rear: 225 kPa (2.25 kgf/cm2, 33 psi)

90 kg (198 lb) to maximum load: Front:

200 kPa (2.00 kgf/cm2, 29 psi) Rear:

225 kPa (2.25 kgf/cm2, 33 psi) aximum load: Vehicle:

161 kg (355 lb) The vehicles maximum load is the combined weight of the rider, pas- senger, cargo, and any accessories.

UB5X10E0.book Page 20 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-20

EAU21403

lve clearance e valves are an important engine mponent, and since valve clearance anges with use, they must be ecked and adjusted at the intervals ecified in the periodic maintenance art. Unadjusted valves can result in proper air-fuel mixture, engine ise, and eventually engine damage. prevent this from occurring, have ur Yamaha dealer check and adjust e valve clearance at regular intervals.

P

is service must be performed when e engine is cold.

EAU64221

Tires Tires are the only contact between the vehicle and the road. Safety in all con- ditions of riding depends on a relatively small area of road contact. Therefore, it is essential to maintain the tires in good condition at all times and replace them at the appropriate time with the speci- fied tires.

Tire air pressure

The tire air pressure should be checked and, if necessary, adjusted before each ride.

WARNING

EWA10504

Operation of this vehicle with im-

proper tire pressure may cause se-

vere injury or death from loss of

control.

The tire air pressure must be

checked and adjusted on cold

tires (i.e., when the temperature

of the tires equals the ambient

temperature).

The tire air pressure must be

adjusted in accordance with the

riding speed and with the total

Ne

tion

cau

C

M

ance and adjustment

8

T

T ri lin h th Y th

WARNING

EWA10462

e front and rear tires should be of

same make and design, other-

se the handling characteristics of

vehicle may be different, which

uld lead to an accident.

er extensive tests, only the tires list- below have been approved for this del by Yamaha.

1. 2. 3.

ront tire: Size:

120/70-15 M/C 56P Manufacturer/model:

DUNLOP/SCOOTSMART ear tire: Size:

140/70-14 M/C 62P Manufacturer/model:

DUNLOP/SCOOTSMART

UB5X10E0.book Page 21 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-21

ire inspection

he tires must be checked before each de. If a tire tread shows crosswise es (minimum tread depth), if the tire

as a nail or glass fragments in it, or if e sidewall is cracked, contact a amaha dealer immediately and have e tire replaced.

WARNING

EWA10523

It is dangerous to ride with a

worn-out tire. When a tire tread

begins to show crosswise lines,

have a Yamaha dealer replace

the tire immediately. Brakes,

tires and related wheel parts re-

placement should also be left to

a Yamaha dealer.

Ride at moderate speeds after

changing a tire since the tire

surface must first be broken

in for it to develop its optimal

characteristics.

Tire information

This model is equipped with tubeless tires and tire air valves. Tires age, even if they have not been used or have only been used occasion- ally. Cracking of the tread and sidewall rubber, sometimes accompanied by carcass deformation, is an evidence of ageing. Old and aged tires shall be checked by tire specialists to ascertain their suitability for further use.

Th

the

wi

the

co

Aft ed mo

Tire sidewall Tire wear indicator Tire tread depth

Minimum tire tread depth (front and rear):

1.0 mm (0.04 in)

F

R

P

8

C To ity no sp

re should be no free play at the ke lever ends. If there is free play, e a Yamaha dealer inspect the ke system.

WARNING

EWA14212

oft or spongy feeling in the brake

er can indicate the presence of

in the hydraulic system. If there is

in the hydraulic system, have a

aha dealer bleed the system be-

e operating the vehicle. Air in the

raulic system will diminish the

king performance, which may re-

t in loss of control and an acci-

t.

UB5X10E0.book Page 22 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-22

EAU21963

ast wheels maximize the performance, durabil- , and safe operation of your vehicle, te the following points regarding the ecified wheels.

The wheel rims should be checked for cracks, bends, warp- age or other damage before each ride. If any damage is found, have a Yamaha dealer replace the wheel. Do not attempt even the smallest repair to the wheel. A de- formed or cracked wheel must be replaced. The wheel should be balanced whenever either the tire or wheel has been changed or replaced. An unbalanced wheel can result in poor performance, adverse han- dling characteristics, and a short- ened tire life.

EAU50861

Checking the front and rear

brake lever free play

Front

Rear

The bra hav bra

A s

lev

air

air

Yam

for

hyd

bra

sul

den

1. No brake lever free play

1. No brake lever free play

1

1

ance and adjustment

8

C

b

F

R

EAU22584

ecking the brake fluid level fore riding, check that the brake fluid bove the minimum level mark.

ke sure the reservoir is parallel to ground when checking.

TICE ECA17641

ake fluid may damage painted

rfaces or plastic parts. Always

an up spilled fluid immediately.

nt brake

1.

1.

pecified brake fluid: DOT 4

inimum level mark

1

UB5X10E0.book Page 23 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-23

EAU22312

hecking the front and rear

rake pads

ront brake

ear brake

The front and rear brake pads must be checked for wear at the intervals spec- ified in the periodic maintenance and lubrication chart. Each brake pad is provided with a wear indicator, which allows you to check the brake pad wear without having to disassemble the brake. To check the brake pad wear, check the position of the wear in- dicator while applying the brake. If a brake pad has worn to the point that the wear indicator almost touches the brake disc, have a Yamaha dealer re- place the brake pads as a set.

Ch Be is a

TIP

Ma the

NO

Br

su

cle

Fro

Brake pad wear indicator

Brake pad wear indicator

1

1

S

1. M

P

8

Re

As th do

Im

lo

th

EAU22734

anging the brake fluid e a Yamaha dealer change the

ke fluid every 2 years. In addition, e the seals of the master cylinders brake calipers, as well as the brake es replaced at the intervals listed ow or sooner if they are damaged or ing. Brake seals: every 2 years Brake hoses: every 4 years1.

UB5X10E0.book Page 24 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-24

ar brake

the brake pads wear, it is normal for e brake fluid level to gradually go wn.

A low brake fluid level may indi- cate worn brake pads or brake system leakage; therefore, be sure to check the brake pads for wear and the brake system for leakage. If the brake fluid level goes down suddenly, have a Yamaha dealer check the cause before further rid- ing.

WARNING

EWA15991

proper maintenance can result in

ss of braking ability. Observe

ese precautions:

Insufficient brake fluid may al-

low air to enter the brake sys-

tem, reducing braking

performance.

Clean the filler cap before re-

moving. Use only DOT 4 brake

fluid from a sealed container.

Use only the specified brake flu-

id; otherwise, the rubber seals

may deteriorate, causing leak-

age.

Refill with the same type of

brake fluid. Adding a brake fluid

other than DOT 4 may result in a

harmful chemical reaction.

Be careful that water does not

enter the brake fluid reservoir

when refilling. Water will signifi-

cantly lower the boiling point of

the fluid and may result in vapor

lock.

Ch Hav bra hav and hos bel leak Minimum level mark

1

ance and adjustment

8

C T p va m

EAU49921

ecking and lubricating the

rottle grip and cable e operation of the throttle grip ould be checked before each ride. In dition, the cable should be lubricat- by a Yamaha dealer at the intervals ecified in the periodic maintenance art.

UB5X10E0.book Page 25 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-25

EAUU0311

hecking the V-belt he V-belt must be checked and re- laced by a Yamaha dealer at the inter- ls specified in the periodic aintenance and lubrication chart.

EAU23098

Checking and lubricating the

cables The operation of all control cables and the condition of the cables should be checked before each ride, and the ca- bles and cable ends should be lubri- cated if necessary. If a cable is damaged or does not move smoothly, have a Yamaha dealer check or re- place it. WARNING! Damage to the

outer housing of cables may result

in internal rusting and cause inter-

ference with cable movement. Re-

place damaged cables as soon as

possible to prevent unsafe condi-

tions. [EWA10712]

Ch

th Th sh ad ed sp ch

Recommended lubricant: Yamaha cable lubricant or other suitable cable lubricant

P

8

Lu

br

Fr

Re

Th br int te

EAU23215

ecking and lubricating the

nterstand and sidestand

operation of the centerstand and stand should be checked before h ride, and the pivots and metal-to- tal contact surfaces should be lubri- ed if necessary.

WARNING

EWA10742

e centerstand or sidestand does

move up and down smoothly,

e a Yamaha dealer check or re-

r it. Otherwise, the centerstand or

estand could contact the ground

distract the operator, resulting

possible loss of control.

UB5X10E0.book Page 26 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-26

EAU23173

bricating the front and rear

ake levers

ont brake lever

ar brake lever

e pivoting points of the front and rear ake levers must be lubricated at the ervals specified in the periodic main- nance and lubrication chart.

Ch

ce

The side eac me cat

If th

not

hav

pai

sid

and

in a

Recommended lubricant: Silicone grease

ance and adjustment

8

TICE ECA10591

ny damage is found or the front

k does not operate smoothly,

ve a Yamaha dealer check or re-

ir it.

UB5X10E0.book Page 27 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-27

EAU23273

Checking the front fork The condition and operation of the front fork must be checked as follows at the intervals specified in the periodic maintenance and lubrication chart.

To check the condition

Check the inner tubes for scratches, damage and excessive oil leakage.

To check the operation

1. Place the vehicle on a level sur- face and hold it in an upright posi- tion. WARNING! To avoid injury,

securely support the vehicle so

there is no danger of it falling

over. [EWA10752]

2. While applying the front brake, push down hard on the handle- bars several times to check if the front fork compresses and re- bounds smoothly.

NO

If a

for

ha

pa

Recommended lubricant: Lithium-soap-based grease

P

8

C W ca of lo pe ch

1

2

EAU60691

ttery

battery is located behind panel A. e page 8-8.) s model is equipped with a VRLA lve Regulated Lead Acid) battery. re is no need to check the electro- or to add distilled water. However, battery lead connections need to checked and, if necessary, tight- d.

WARNING

EWA10761

Electrolyte is poisonous and

dangerous since it contains sul-

furic acid, which causes severe

egative battery lead (black) ositive battery lead (red) attery

1

2

UB5X10E0.book Page 28 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-28

EAU45512

hecking the steering orn or loose steering bearings may use danger. Therefore, the operation the steering must be checked as fol- ws at the intervals specified in the riodic maintenance and lubrication art. . Place the vehicle on the center-

stand. WARNING! To avoid inju-

ry, securely support the vehicle

so there is no danger of it falling

over. [EWA10752]

. Hold the lower ends of the front fork legs and try to move them for- ward and backward. If any free play can be felt, have a Yamaha dealer check or repair the steer- ing.

EAU23292

Checking the wheel bearings

The front and rear wheel bearings must be checked at the intervals specified in the periodic maintenance and lubrica- tion chart. If there is play in the wheel hub or if the wheel does not turn smoothly, have a Yamaha dealer check the wheel bearings.

Ba

The (Se Thi (Va The lyte the be ene

1. N 2. P 3. B

3

ance and adjustment

8

T

H te h

nect the positive lead before

connecting the negative lead.

[ECA16842]

. After installation, make sure that the battery leads are properly con- nected to the battery terminals.

TICE ECA16531

ays keep the battery charged.

ring a discharged battery can

use permanent battery damage.

UB5X10E0.book Page 29 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-29

burns. Avoid any contact with

skin, eyes or clothing and al-

ways shield your eyes when

working near batteries. In case

of contact, administer the fol-

lowing FIRST AID.

EXTERNAL: Flush with plenty

of water.

INTERNAL: Drink large quan-

tities of water or milk and im-

mediately call a physician.

EYES: Flush with water for 15

minutes and seek prompt

medical attention.

Batteries produce explosive hy-

drogen gas. Therefore, keep

sparks, flames, cigarettes, etc.,

away from the battery and pro-

vide sufficient ventilation when

charging it in an enclosed

space.

KEEP THIS AND ALL BATTER-

IES OUT OF THE REACH OF

CHILDREN.

o charge the battery

ave a Yamaha dealer charge the bat- ry as soon as possible if it seems to

ave discharged. Keep in mind that the

battery tends to discharge more quick- ly if the vehicle is equipped with op- tional electrical accessories.

NOTICE ECA16522

To charge a VRLA (Valve Regulated

Lead Acid) battery, a special (con-

stant-voltage) battery charger is re-

quired. Using a conventional battery

charger will damage the battery.

To store the battery

1. If the vehicle will not be used for more than one month, remove the battery, fully charge it, and then place it in a cool, dry place. NOTICE: When removing the

battery, be sure to turn the main

switch off, then disconnect the

negative lead before discon-

necting the positive lead. [ECA16304]

2. If the battery will be stored for more than two months, check it at least once a month and fully charge it if necessary.

3. Fully charge the battery before in- stallation. NOTICE: When install-

ing the battery, be sure to turn

the main switch off, then con-

4

NO

Alw

Sto

ca

P

8

R Th wh ua (S

TI

To st

rating than recommended to

avoid causing extensive dam-

age to the electrical system and

possibly a fire. [EWA15132]

1. 2. 3. 4.

pecified fuses: Main fuse:

20.0 A Main fuse 2:

10.0 A Terminal fuse 1:

2.0 A Signaling system fuse:

10.0 A Signaling system fuse 2:

7.5 A Radiator fan motor fuse:

7.5 A Backup fuse:

15.0 A Turn signal light and hazard fuse:

15.0 A ABS control unit fuse:

7.5 A ABS motor fuse:

30.0 A ABS solenoid fuse:

15.0 A Answer back fuse:

2.0 A

UB5X10E0.book Page 30 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-30

EAU78242

eplacing the fuses e main fuse and the fuse boxes, ich contain the fuses for the individ- l circuits, are located under panel A. ee page 8-8.)

P

access the main fuse, remove the arter relay cover as shown.

If a fuse is blown, replace it as follows. 1. Turn the main switch off and turn

off the electrical circuit in ques- tion.

2. Remove the blown fuse, and then install a new fuse of the specified amperage. WARNING! Do not

use a fuse of a higher amperage

Fuse box Main fuse Spare main fuse Starter relay cover

1 2

3

4

1. Signaling system fuse 2 2. Signaling system fuse 3. ABS control unit fuse 4. Main fuse 2 5. Radiator fan motor fuse 6. Backup fuse 7. Spare fuse 8. ABS motor fuse 9. ABS solenoid fuse 10.Turn signal light and hazard fuse 11.Terminal fuse 1 12.Answer back fuse

1 2

3 4

5 6 7

8 9 10

11 12

7 S

ance and adjustment

8

EAU43006

placing a turn signal light

lb . Remove the turn signal light unit

by removing the screw.

. Remove the turn signal light bulb socket (together with the bulb) by turning it counterclockwise.

urn signal light lens crew

1

2

UB5X10E0.book Page 31 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-31

3. Turn the main switch on and turn on the electrical circuit in question to check if the device operates.

4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system.

EAUN2261

Vehicle lights This model is equipped with LED lights for headlights, auxiliary lights and brake/tail light. If a light does not come on, check the fuse and then have a Yamaha dealer check the vehicle.

NOTICE ECA16581

Do not affix any type of tinted film or

stickers to the headlight lens.

Re

bu 1

2 1. Headlight (low beam) 2. Headlight (high beam) 3. Auxiliary light

2

13 3

1. T 2. S

P

8

3

4 5

EAU78560

placing the license plate

ht bulb Remove the license plate light unit by removing the bolts and plate, and then remove the license plate light bulb socket (together with the bulb) by pulling it out.

Remove the burnt-out bulb by pulling it out.

1.

1.

icense plate light unit olt icense plate light bulb socket late

1

2

34

UB5X10E0.book Page 32 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-32

. Remove the burnt-out bulb by pulling it out.

. Insert a new bulb into the socket.

. Install the socket (together with the bulb) by turning it clockwise.

6. Install the turn signal light unit by installing the screw. NOTICE: Do

not overtighten the screw, oth-

erwise the lens may break.

[ECA11192]

Re

lig 1.

2.

Turn signal light bulb socket

Turn signal light bulb

1

1

1. L 2. B 3. L 4. P

ance and adjustment

8

aters or furnaces. Gasoline or

soline vapors can ignite or ex-

de, causing severe injury or prop-

y damage.

EAU76551

art key system troubleshooting

ase check the following items when smart key system does not work.

Is the smart key turned on? (See page 4-5.) Is the smart key battery dis- charged? (See page 4-6.) Is the smart key battery installed correctly? (See page 4-6.) Is the smart key being used in a lo- cation with strong radio waves or other electromagnetic noise? (See page 4-1.) Are you using the smart key that is registered to the vehicle? Is the vehicle battery discharged? When the vehicle battery is dis- charged, the smart key system will not operate. Please have the vehi- cle battery charged or replaced. (See page 8-28.)

1.

UB5X10E0.book Page 33 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-33

3. Insert a new bulb into the socket. 4. Install the socket (together with

the bulb) by pushing it in, and then install the license plate light unit by installing the plate and bolts.

EAU60701

Troubleshooting Although Yamaha vehicles receive a thorough inspection before shipment from the factory, trouble may occur during operation. Any problem in the fuel, compression, or ignition systems, for example, can cause poor starting and loss of power. The following troubleshooting charts represent quick and easy procedures for checking these vital systems your- self. However, should your vehicle re- quire any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the vehicle prop- erly. Use only genuine Yamaha replace- ment parts. Imitation parts may look like Yamaha parts, but they are often inferior, have a shorter service life and can lead to expensive repair bills.

WARNING

EWA15142

When checking the fuel system, do

not smoke, and make sure there are

no open flames or sparks in the ar-

ea, including pilot lights from water

he

ga

plo

ert

Sm

Ple the

License plate light bulb

1

P

8

If af Ya sy

TI

Se fo wi

UB5X10E0.book Page 34 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-34

the smart key system does not work ter checking the above items, have a maha dealer check the smart key stem.

P

e Emergency mode on page 8-37 r information on starting the engine thout the smart key.

ance and adjustment

8

EAU86350

T

s not start. ry.

hicle.

ehicle.

engine does not start. eck the compression.

starting the engine.

The engine does not start. Check the ignition.

UB5X10E0.book Page 35 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-35

roubleshooting chart

Check the fuel level in the fuel tank.

1. Fuel There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel. The engine doe Check the batte

Try starting the engine.

4. Compression There is compression.

There is no compression.

The engine does not start. Have a Yamaha dealer check the ve

Have a Yamaha dealer check the v

Remove the spark plug and check the electrodes.

3. Ignition Wipe off with a dry cloth and correct the spark plug gap, or replace the spark plug(s).

Have a Yamaha dealer check the vehicle. The Ch

Operate the electric starter.

2. Battery The engine turns over quickly.

The engine turns over slowly.

The battery is good.

Dry

Wet Try

Check the battery lead connections, and charge the battery if necessary.

P

8

EAU86420

En EWAT1041

ding hot fluid and steam may be

until the engine has cooled.

the cap counterclockwise to the

stopped, press down on the cap

TI

If c hanged to the recommended cool- an

Have a Yamaha dealer check and repair the cooling system.

Add coolant. (See TIP.)

f the engine overheats again, have a eck and repair the cooling system.

is e.

is age.

UB5X10E0.book Page 36 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-36

gine overheating

WARNING

Do not remove the radiator cap when the engine and radiator are hot. Scal

blown out under pressure, which could cause serious injury. Be sure to wait

Place a thick rag, like a towel, over the radiator cap, and then slowly rotate

detent to allow any residual pressure to escape. When the hissing sound has

while turning it counterclockwise, and then remove the cap.

P

oolant is not available, tap water can be temporarily used instead, provided that it is c t as soon as possible.

Wait until the engine has cooled.

Check the coolant level in the reservoir and radiator.

The coolant level is OK.

The coolant level is low. Check the cooling system for leakage.

Start the engine. I Yamaha dealer ch

There leakag

There no leak

ance and adjustment

8

E W a ve e ke

T

m

For example, if the identification number is 123456: Push and hold the knob. The smart key system indicator light will start to flash.

Release the knob after the smart key system indicator light flashes once. The first digit of the identification number has been set as 1. Push and hold the knob again.

UB5X10E0.book Page 37 Thursday, May 27, 2021 8:55 AM

Periodic mainten

8-37

EAU76561

mergency mode hen the smart key is lost or dam-

ged, or its battery has discharged, the hicle can still be turned on and the

ngine started. You will need the smart y system identification number.

o operate the vehicle in emergency

ode

1. Stop the vehicle in a safe place and turn the main switch to OFF.

2. Push the main switch knob for 5 seconds until the smart key sys- tem indicator light flashes once, then release it. Repeat two more times. The smart key system indi- cator light will come on for three seconds to indicate the transition to emergency mode.

3. After the smart key system indica- tor light goes off, input the identifi- cation number as follows.

4. Inputting the identification number is done by counting the number of flashes of the smart key system in- dicator light.

1. Smart key system indicator light

1. Identification number card

1

868588

1

P

8

TI

W ap m di se fro

UB5X10E0.book Page 38 Thursday, May 27, 2021 8:55 AM

eriodic maintenance and adjustment

8-38

Release the knob after the smart key system indicator light flashes twice. The second digit has been set as 2. Repeat the above procedure until all digits of the identification num- ber have been set. The smart key system indicator light will flash for 10 seconds if the correct identifi- cation number was entered.

P

hen one of the following situations plies, emergency mode will be ter- inated and the smart key system in- cator light will flash quickly for 3 conds. In this case, start over again m step 2.

When there are no knob opera- tions for 10 seconds during the identification number input pro- cess. When the smart key system indi- cator light is allowed to flash nine or more times.

The identification number is not entered correctly.

5. While the smart key system indi- cator light is on, push the knob once more to complete emergen- cy mode access. The smart key indicator light will go off and then come back on for approximately 4 seconds.

6. While the smart key system indi- cator light is on, turn the main switch to ON. The vehicle can now be operated normally.

ter care and storage

9

M

N

S

m

s

a

fo

b

c

th

th

b

is

TICE ECA26280

proper cleaning can cause cos-

tic and mechanical damage. Do

t use:

high-pressure washers or

steam-jet cleaners. Excessive

water pressure may cause wa-

ter seepage and deterioration of

wheel bearings, brakes, trans-

mission seals and electrical de-

vices. Avoid high-pressure

detergent applications such as

those available in coin-operated

car washers.

harsh chemicals, including

strong acidic wheel cleaners,

especially on spoke or magne-

sium wheels.

harsh chemicals, abrasive

cleaning compounds, or wax on

matte-finished parts. Brushes

can scratch and damage the

matte-finish, use soft sponge or

towel only.

towels, sponges, or brushes

contaminated with abrasive

cleaning products or strong

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Scoo

9-1

EAU37834

atte color caution

OTICE ECA15193

ome models are equipped with

atte colored finished parts. Be

ure to consult a Yamaha dealer for

dvice on what products to use be-

re cleaning the vehicle. Using a

rush, harsh chemical products or

leaning compounds when cleaning

ese parts will scratch or damage

eir surface. Wax also should not

e applied to any matte colored fin-

hed parts.

EAU83911

Care Frequent, thorough cleaning of the ve- hicle will not only enhance its appear- ance but also will improve its general performance and extend the useful life of many components. Washing, clean- ing, and polishing will also give you a chance to inspect the condition of the vehicle more frequently. Be sure to wash the vehicle after riding in the rain or near the sea, because salt is corro- sive to metals.

TIP

The roads of heavy snowfall areas may be sprayed with salt as a de- icing method. This salt can stay on the roads well into spring, so be sure to wash the underside and chassis parts after riding in such areas.

Genuine Yamaha care and main- tenance products are sold under the YAMALUBE brand.

See your Yamaha dealer for addi- tional cleaning tips.

NO

Im

me

no

S

9

Be

1

2

3

4

5

windshield. Additionally, some

cleaning compounds for plastic

may scratch the windshield, so

be sure to test all cleaning prod-

ucts before general application.

[ECA26310]

Rinse off thoroughly with clean water. Be sure to remove all deter- gent residues, as they can be harmful to plastic parts.

er washing

Dry the vehicle with a chamois or absorbent towel, preferably mi- crofiber terrycloth. For drive chain-equipped models, dry and then lubricate it to prevent rust. Use a chrome polish to shine chrome, aluminum, and stainless steel parts. Often the thermally in- duced discoloring of stainless steel exhaust systems can be re- moved through polishing. Apply a corrosion protection spray (YAMALUBE Silicone Protectant & Lubricant) on all metal parts in- cluding chrome or nickel-plated surfaces. WARNING! Do not ap-

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

cooter care and storage

9-2

chemicals such as, solvents,

gasoline, rust removers, brake

fluid, or antifreeze, etc.

fore washing

. Park the vehicle out of direct sun- light and allow it to cool. This will help avoid water spots.

. Make sure all caps, covers, elec- trical couplers and connectors are tightly installed.

. Cover the muffler end with a plas- tic bag and a strong rubber band.

. Pre-soak stubborn stains like in- sects or bird droppings with a wet towel for a few minutes.

. Remove road grime and oil stains with a biodegradable degreaser (YAMACLEAN Pro-Wash Spray) and a plastic-bristle brush or sponge. NOTICE: Do not use

degreasing agent on areas re-

quiring lubrication such as

seals, gaskets, and wheel axles.

Follow product instructions.

[ECA26290]

Washing

1. Rinse off any degreaser and spray down the vehicle with a garden hose. Use only enough pressure to do the job. Avoid spraying wa- ter directly into the muffler, instru- ment panel, air inlet, or other inner areas such as underseat storage compartments.

2. Wash the vehicle with a quality au- tomotive-type detergent (YAMALUBE Wash & Wax) mixed with cool water and a soft, clean towel or sponge. Use an old tooth- brush or plastic-bristle brush for hard-to-reach places. NOTICE: Use cold water if the vehicle has

been exposed to salt. Warm wa-

ter will increase salts corrosive

properties. [ECA26301]

3. For windshield-equipped vehicles: Clean the windshield with a soft towel or sponge dampened with water and a pH neutral detergent. If necessary, use a high-quality windshield cleaner (YAMACLEAN Glass Cleaner) or windshield pol- ish. NOTICE: Never use any

strong chemicals to clean the

4.

Aft

1.

2.

3.

4.

ter care and storage

9

1

EAU84141

orage ays store the vehicle in a cool, dry ce. If necessary, protect it against st with a porous cover. Be sure the gine and the exhaust system are ol before covering the vehicle. If the icle often sits for weeks at a time

tween uses, the use of a quality fuel bilizer (Fuel Med RX) is recommend- after each fill-up.

TICE ECA21170

Storing the vehicle in a poorly

ventilated room or covering it

with a tarp, while it is still wet,

will allow water and humidity to

seep in and cause rust.

To prevent corrosion, avoid

damp cellars, stables (because

of the presence of ammonia)

and areas where strong chemi-

cals are stored.

ng term storage

fore storing the vehicle long term (60 ys or more):

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

Scoo

9-3

ply silicone or oil spray to seats,

hand grips, rubber foot pegs or

tire treads. Otherwise these

parts will become slippery,

which could cause loss of con-

trol. Thoroughly clean the sur-

faces of these parts before

operating the vehicle. [EWA20650]

5. Treat rubber, vinyl, and unpainted plastic parts with a suitable care product (YAMACLEAN Vinyl Dressing).

6. Touch up minor paint damage caused by stones, etc.

7. Wax all painted surfaces using a non-abrasive wax or use a detail spray for motorcycles (YAMALUBE Spray Polish & In- stant Detailer).

8. When finished cleaning, start the engine and let it idle for several minutes to help dry any remaining moisture.

9. If the headlight lens has fogged up, start the engine and turn on the headlight to help remove the moisture.

0. Let the vehicle dry completely be- fore storing or covering it.

NOTICE ECA26320

Do not apply wax to rubber or

unpainted plastic parts.

Do not use abrasive polishing

compounds as they will wear

away the paint.

Apply sprays and wax sparingly.

Wipe off excess afterwards.

WARNING

EWA20660

Contaminants left on the brakes or

tires can cause loss of control.

Make sure there is no lubricant

or wax on the brakes or tires.

If necessary, wash the tires with

warm water and a mild deter-

gent.

If necessary, clean the brake

discs and pads with brake

cleaner or acetone.

Before riding at higher speeds,

test the vehicles braking per-

formance and cornering behav-

ior.

St Alw pla du en co veh be sta ed

NO

Lo

Be da

S

9

1

2

3

4

5

6

Check and correct the tire air pressure, and then lift the vehicle so that all wheels are off the ground. Otherwise, turn the wheels a little once a month in or- der to prevent the tires from be- coming degraded in one spot. Cover the muffler outlet with a plastic bag to prevent moisture from entering it. Remove the battery and fully charge it, or attach a maintenance charger to keep the battery opti- mally charged. NOTICE: Confirm

that the battery and its charger

are compatible. Do not charge a

VRLA battery with a convention-

al charger. [ECA26330]

If the battery will be removed, charge it once a month and store it in a temperate location between 32-90 F (0-30 C). See page 8-28 for more informa- tion on charging and storing the battery.

UB5X10E0.book Page 4 Thursday, May 27, 2021 8:55 AM

cooter care and storage

9-4

. Make all necessary repairs and perform any outstanding mainte- nance.

. Follow all instructions in the Care section of this chapter.

. Fill up the fuel tank, adding fuel stabilizer according to product in- structions. Run the engine for 5 minutes to distribute treated fuel through the fuel system.

. For vehicles equipped with a fuel cock: Turn the fuel cock lever to the off position.

. For vehicles with a carburetor: To prevent fuel deposits from build- ing up, drain the fuel in the carbu- retor float chamber into a clean container. Retighten the drain bolt and pour the fuel back into the fuel tank.

. Use a quality engine fogging oil (YAMALUBE Stor-Rite Engine Fogging Oil) according to product instructions to protect internal en- gine components from corrosion. If engine fogging oil is not avail- able, perform the following steps for each cylinder:

a. Remove the spark plug cap and spark plug.

b. Pour a teaspoonful of engine oil into the spark plug bore.

c. Install the spark plug cap onto the spark plug, and then place the spark plug on the cylinder head so that the electrodes are grounded. (This will limit spark- ing during the next step.)

d. Turn the engine over several times with the starter. (This will coat the cylinder wall with oil.) WARNING! To prevent dam-

age or injury from sparking,

make sure to ground the

spark plug electrodes while

turning the engine over.

[EWA10952]

e. Remove the spark plug cap from the spark plug, and then install the spark plug and the spark plug cap.

7. Lubricate all control cables, piv- ots, levers and pedals, as well as the sidestand and centerstand (if equipped).

8.

9.

10.

TIP

Specifications

10

D

W

E

uel tank capacity: 13 L (3.4 US gal, 2.9 Imp.gal)

uel reserve amount: 2.4 L (0.63 US gal, 0.53 Imp.gal)

el injection:

hrottle body: ID mark:

B741 nt tire:

ype: Tubeless

ize: 120/70-15 M/C 56P

anufacturer/model: DUNLOP/SCOOTSMART

ar tire:

ype: Tubeless

ize: 140/70-14 M/C 62P

anufacturer/model: DUNLOP/SCOOTSMART

ading:

aximum load: 161 kg (355 lb)

Total weight of rider, passenger, cargo and ccessories) nt brake:

ype: Hydraulic single disc brake

ar brake:

ype: Hydraulic single disc brake

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

10-1

imensions:

Overall length: 2185 mm (86.0 in)

Overall width: 775 mm (30.5 in)

Overall height: 1415/1465 mm (55.7/57.7 in)

Seat height: 795 mm (31.3 in)

Wheelbase: 1540 mm (60.6 in)

Ground clearance: 135 mm (5.31 in)

Minimum turning radius: 2.6 m (8.53 ft)

eight:

Curb weight: 180 kg (397 lb)

ngine:

Combustion cycle: 4-stroke

Cooling system: Liquid cooled

Valve train: SOHC

Number of cylinders: Single cylinder

Displacement: 292 cm3

Bore stroke: 70.0 75.9 mm (2.76 2.99 in)

Starting system: Electric starter

Engine oil:

Recommended brand:

SAE viscosity grades: 10W-40, 10W-50, 15W-40, 20W-40 or 20W-50

Recommended engine oil grade: API service SG type or higher, JASO standard MA or MB

Engine oil quantity: Oil change:

1.50 L (1.59 US qt, 1.32 Imp.qt) With oil filter removal:

1.60 L (1.69 US qt, 1.41 Imp.qt) Final transmission oil:

Type: Motor oil SAE 10W-40 type SG or higher

Quantity: 0.20 L (0.21 US qt, 0.18 Imp.qt)

Coolant quantity:

Coolant reservoir (up to the maximum level mark):

0.18 L (0.19 US qt, 0.16 Imp.qt) Radiator (including all routes):

1.10 L (1.16 US qt, 0.97 Imp.qt) Fuel:

Recommended fuel: Unleaded gasoline (E10 acceptable)

Octane number (RON): 90

F

F

Fu

T

Fro

T

S

M

Re

T

S

M

Lo

M

( a

Fro

T

Re

T

S

10

Fr

Re

El

Ba

Bu

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

pecifications

10-2

ont suspension:

Type: Telescopic fork

ar suspension:

Type: Unit swing

ectrical system:

System voltage: 12 V

ttery:

Model: GTZ8V

Voltage, capacity: 12 V, 7.0 Ah (10 HR)

lb wattage:

Headlight: LED

Brake/tail light: LED

Front turn signal/position light: 21.0 W/5.0 W

Rear turn signal light: 10.0 W

Auxiliary light: LED

License plate light: 5.0 W

onsumer information

11

Id R b m p n th a fr

V

E

M

EAU26442

gine serial number

e engine serial number is stamped o the crankcase.

EAU26501

del label

ngine serial number

odel label

1

1

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

C

11-1

EAU53562

entification numbers ecord the vehicle identification num- er, engine serial number, and the odel label information in the spaces rovided below. These identification umbers are needed when registering e vehicle with the authorities in your

rea and when ordering spare parts om a Yamaha dealer.

EHICLE IDENTIFICATION NUMBER:

NGINE SERIAL NUMBER:

ODEL LABEL INFORMATION:

EAU26411

Vehicle identification number

The vehicle identification number is stamped into the frame.

TIP

The vehicle identification number is used to identify your vehicle and may be used to register it with the licensing authority in your area.

En

Th int

Mo

1. Vehicle identification number

1

1. E

1. M

C

11

Th of pa th inf ing

Ve

tio

Th tio illu tio re En

EAU90250

hicle data recording s models ECU stores certain vehi- data to assist in the diagnosis of

lfunctions and for research, statisti- analysis and development purpos-

ough the sensors and recorded a will vary by model, the main data nts are:

Vehicle status and engine perfor- mance data Fuel-injection and emission-relat- ed data

s data will be uploaded only when a cial Yamaha diagnostic tool is at- hed to the vehicle, such as when intenance checks or service proce- es are performed. icle data uploaded will be handled ropriately according to the follow-

Privacy Policy.

acy Policy

1.

s://yamaha-motor.com/ acy-policy

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

onsumer information

11-2

e model label is affixed to the inside the rear storage compartment. (See ge 5-18.) Record the information on is label in the space provided. This ormation will be needed when order- spare parts from a Yamaha dealer.

EAU48271

hicle Emission Control Informa-

n label

e Vehicle Emission Control Informa- n label is affixed at the location in the stration. This label shows specifica- ns related to exhaust emissions as quired by federal law, state law and vironment Canada.

EAU69910

Diagnostic connector

The diagnostic connector is located as shown.

Ve Thi cle ma cal es. Alth dat poi

Thi spe tac ma dur Veh app ing

Priv

Vehicle Emission Control Information label

1

1. Diagnostic connector

1

http priv

onsumer information

11

Y th e ve o d Y p p ly

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

C

11-3

amaha will not disclose this data to a ird party except in the following cas-

s. In addition, Yamaha may provide hicle data to a contractor in order to

utsource services related to the han- ling of vehicle data. Even in this case, amaha will require the contractor to roperly handle the vehicle data we rovided and Yamaha will appropriate- manage the data. With the consent of the vehicle

owner Where obligated by law For use by Yamaha in litigation When the data is not related to an

individual vehicle nor owner

C

11

EAU26553

R If injury or death, you should immedi- at tifying Yamaha Motor Corporation, U. that a safety defect exists in a group of me involved in individual problems be To 236 (TTY: 1-800-424-9153); go to ht SE, West Building, Washington, DC 20 w.safercar.gov.

UB5X10E0.book Page 4 Thursday, May 27, 2021 8:55 AM

onsumer information

11-4

eporting safety defects you believe that your vehicle has a defect which could cause a crash or could cause ely inform the National Highway Traffic Safety Administration (NHTSA) in addition to no S.A. If NHTSA receives similar complaints, it may open an investigation, and if it finds vehicles, it may order a recall and remedy campaign. However, NHTSA cannot beco tween you, your dealer, or Yamaha Motor Corporation, U.S.A. contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4

tp://www.safercar.gov; or write to: Administrator, NHTSA, 1200 New Jersey Avenue, 590. You can also obtain other information about motor vehicle safety from http://ww

onsumer information

11

EAU26581

S T

F ring inoperative by any person other th f design incorporated into any new ve chaser or while it is in use or (2) the u ed inoperative by any person. A LISTED BELOW. T tc.

UB5X10E0.book Page 5 Thursday, May 27, 2021 8:55 AM

C

11-5

cooter noise regulation AMPERING WITH NOISE CONTROL SYSTEM PROHIBITED:

ederal law prohibits the following acts or the causing thereof: (1) The removal or rende an for purposes of maintenance, repair, or replacement of any device or element o hicle for the purpose of noise control prior to its sale or delivery to the ultimate pur

se of the vehicle after such device or element of design has been removed or render MONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS

hese acts include tampering with the following systems; i.e., modification, removal, e Exhaust system

Muffler Exhaust pipe Silencer

Intake system

Air cleaner case Air cleaner element Intake duct

C

11

EAU26633

M Co le will be required to document that m t below is printed only as a reminder th

ler

ess Remarks

UB5X10E0.book Page 6 Thursday, May 27, 2021 8:55 AM

onsumer information

11-6

aintenance record pies of work orders and/or receipts for parts purchased and installed on your vehic

aintenance has been completed in accordance with the emissions warranty. The char at maintenance work is required. It is not acceptable proof of maintenance work.

Maintenance

interval

Date of

service Mileage

Servicing dea

name and addr

600 mi (1000 km) or

1 month 4000 mi

(7000 km) or 6 months 8000 mi

(13000 km) or 12 months 12000 mi

(19000 km) or 18 months 16000 mi

(25000 km) or 24 months 20000 mi

(31000 km) or 30 months 24000 mi

(37000 km) or 36 months 28000 mi

(43000 km) or 42 months 32000 mi

(49000 km) or 48 months

onsumer information

11

ler

ress Remarks

UB5X10E0.book Page 7 Thursday, May 27, 2021 8:55 AM

C

11-7

36000 mi (55000 km) or

54 months 40000 mi

(61000 km) or 60 months

Maintenance

interval

Date of

service Mileage

Servicing dea

name and add

C

11

EAU87060

YA SCOOTER LIMITED WAR-

R

Ya e Ya w th lim

T sh m w

D Ya re by th w p p

G in

S in m

T w

PERIOD 6,000 km (3,750 miles)

or five years, whichever occurs first

12,000 km (7,465 miles) or five years, whichever occurs first

18,000 km (11,185 miles) or five years, whichever occurs first

30,000 km (18,641 miles) or five years, whichever occurs first

AHA MOTOR CORPORATION, U.S.A. MAKES NO ER WARRANTY OF ANY KIND, EXPRESSED OR IED. ALL IMPLIED WARRANTIES OF CHANTABILITY AND FITNESS FOR A ICULAR PURPOSE WHICH EXCEED THE

IGATIONS AND TIME LIMITS STATED IN THIS RANTY ARE HEREBY DISCLAIMED BY YAMAHA OR CORPORATION, U.S.A. AND EXCLUDED M THIS WARRANTY.

E STATES DO NOT ALLOW LIMITATIONS ON LONG AN IMPLIED WARRANTY LASTS, SO THE VE LIMITATIONS MAY NOT APPLY TO YOU. ALSO LUDED FROM THIS WARRANTY ARE ANY

ENTAL OR CONSEQUENTIAL DAMAGES UDING LOSS OF USE. SOME STATES DO NOT W THE EXCLUSION OR LIMITATION OF ENTAL OR CONSEQUENTIAL DAMAGES, SO

ABOVE EXCLUSION MAY NOT APPLY TO YOU.

WARRANTY GIVES YOU SPECIFIC LEGAL TS, AND YOU MAY ALSO HAVE OTHER RIGHTS H VARY FROM STATE TO STATE.

YAMAHA MOTOR CORPORATION, U.S.A. Post Office Box 6555

Cypress, California 90630 1-800-962-7926

INE LACEMENT r 50cc

to 169cc

c to 279cc

c or over

1

a b

c d

e f g

UB5X10E0.book Page 8 Thursday, May 27, 2021 8:55 AM

onsumer information

11-8

MAHA MOTOR CORPORATION, U.S.A. 2020 AND LATER MODEL

ANTY

maha Motor Corporation, U.S.A. hereby warrants that ach new Yamaha scooter purchased from an authorized maha scooter dealer in the continental United States

ill be free from defects in material and workmanship for e period of time stated herein, subject to certain stated itations.

HE PERIOD OF WARRANTY for Yamaha scooters all be one (1) year from the date of purchase, with no ileage limitation, except for the battery, which is arranted for thirty (30) days from the date of purchase.

URING THE PERIOD OF WARRANTY any authorized maha scooter dealer will, free of charge, repair or place, at Yamahas option, any part adjudged defective Yamaha due to faulty workmanship or material from e factory. Parts used in warranty repairs will be arranted for the balance of the products warranty eriod. All parts replaced under warranty become the roperty of Yamaha Motor Corporation, U.S.A.

ENERAL EXCLUSIONS from this warranty shall clude any failures caused by: Competition or racing use. Installation of parts or accessories that are not qualitatively equivalent to genuine Yamaha parts. Abnormal strain, neglect, or abuse. Lack of proper maintenance and off-season storage as described in the Owners Manual. Accident or collision damage. Modification to original parts. Damage due to improper transportation

PECIFIC EXCLUSIONS from this warranty shall clude parts replaced due to normal wear or routine aintenance.

HE CUSTOMERS RESPONSIBILITY under this arranty shall be to: Operate and maintain the scooter as specified in the appropriate Owners Manual, and

Give notice to an authorized Yamaha scooter dealer of any and all apparent defects within ten (10) days after discovery, and make the machine available at that time for inspection and repairs at such dealers place of business.

WARRANTY TRANSFER: To transfer any remaining warranty from the original purchaser to any subsequent purchaser, it is imperative that the machine be inspected and registered for warranty by an authorized Yamaha scooter dealer. In order for this warranty to remain in effect, this inspection and registration must take place within ten (10) days after transfer. A reasonable dealer-imposed fee may be charged for the inspection.

EMISSIONS CONTROL SYSTEM WARRANTY Yamaha Motor Corporation, U.S.A. also warrants to the ultimate purchaser and each subsequent purchaser of each Yamaha scooter covered by this warranty that the vehicle is designed, built, and equipped so as to conform at the time of sale with all U.S. emissions standards applicable at the time of manufacture and that it is free from defects in materials and workmanship which would cause it not to meet these standards within the periods listed immediately below. Failures other than those resulting from defects in material or workmanship which arise solely as a result of owner abuse and/or lack of proper maintenance are not covered by this warranty.

YAM OTH IMPL MER PART OBL WAR MOT FRO

SOM HOW ABO EXC INCID INCL ALLO INCID THE

THIS RIGH WHIC

ENG DISP Unde

50cc

170c

280c

2.

.

.

.

.

.

.

.

.

onsumer information

11

UB5X10E0.book Page 9 Thursday, May 27, 2021 8:55 AM

C

11-9

C

11

EAU26753

YA

ecreation Interruption Protection extra cost. TRIP gives you up to r occurrence for any reasonable ecause your Yamaha needs ment vehicle rental, emergency food and lodging when you are

uperb coverage goes into effect S., so it applies to any warranty red repairs during your entire

red at any authorized Yamaha

sferable to a new owner if you make your Yamaha much more

coverage is only available to d only while your Yamaha is still Warranty period. So visit your get all the facts. They can show ct your investment with Yamaha

UB5X10E0.book Page 10 Thursday, May 27, 2021 8:55 AM

onsumer information

11-10

MAHA EXTENDED SERVICE (Y.E.S.)

Keep your Yamaha protected even after your limited warranty expires with genuine Yamaha Extended Service (Y.E.S.).

Y.E.S. is designed and administered by Yamaha Motor Corporation to provide maximum owner satisfaction. It provides uninterrupted factory-backed coverage for extra peace of mind.

Y.E.S. is flexible. You choose the plan thats right for you: 12 months, 24 months, 36 months or, on certain models, even 48 months beyond your warranty period.

Y.E.S. is designed and administered by the same Yamaha people who handle your warranty and it shows in the comprehensive coverage benefits. There are no mileage limitations. Coverage isnt limited to moving parts or the drivetrain like many other plans. And Y.E.S. covers manufacturing defects just like the warranty. See the sample contract at your Yamaha dealer to see how comforting uninterrupted factory- backed protection can be.

You dont have to pay anything for covered repairs. Theres no deductible to pay, and repairs arent pro-rated. You dont have any out-of-pocket expenses for covered repairs.

In addition, Travel and R (TRIP) is included at no $250 reimbursement pe expenses you incur b covered service: replace towing, phone calls, even away from home. This s when you purchase Y.E. repairs as well as cove Y.E.S. plan period.

Y.E.S. coverage is hono dealer nationwide.

Y.E.S. coverage is tran sell or trade-in. That can valuable!

This excellent Y.E.S. plan Yamaha owners like you, an within the Yamaha Limited authorized Yamaha dealer to you how easy it is to prote Extended Service.

onsumer information

11

NDED SERVICE

UB5X10E0.book Page 11 Thursday, May 27, 2021 8:55 AM

C

11-11

We urge you to act now. Youll get the excellent benefits of TRIP coverage right away, and youll rest easy knowing youll have strong factory-backed protection even after your Yamaha Limited Warranty expires.

A special note: If visiting your dealer isnt convenient, contact Yamaha with your VIN number and well be happy to help you get the Y.E.S. coverage you need.

Yamaha Service Marketing P.O. Box 6555 Cypress, CA 90630 1-(866)-YES-EXTD (1-866-937-3983)

YAMAHA EXTE

1

del label ...........................................11-1 lti-function display .............................5-3

ise regulation ....................................11-5

erating range of the smart key ystem ..................................................4-2

nel, removing and installing ................8-8 rking....................................................7-4 rt 15 of FCC Rules ..............................4-2 rt locations ..........................................3-1 wer outlet..........................................5-23

fe-riding points....................................2-5 fety defects, reporting ......................11-4 fety information...................................2-1 ock absorber assemblies, djusting .............................................5-23 estand..............................................5-24 art key................................................4-5 art key battery....................................4-6 art key system ...................................4-1 art key system indicator light.............5-2 art key system, troubleshooting ......8-33 ark plug, checking ..............................8-9 ecifications .......................................10-1 eedometer ..........................................5-2

arting off ..............................................7-3 arting the engine..................................7-2 eering, checking ................................8-28 op/Run/Start switch ..........................5-11 orage ...................................................9-3 orage compartments .........................5-18

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

2

In

A

AB AB Ac Ai

e B

B B B B B B B

C

C C C C C

c C

D

D D D

E

Em En En En En En

12-1

dex

S.......................................................5-12 S warning light ...................................5-1 celeration and deceleration ................7-3

r filter and V-belt case air filter lements .............................................8-15

attery ..................................................8-28 rake fluid, changing ............................8-24 rake fluid level, checking ....................8-23 rake lever, front ..................................5-12 rake lever, rear....................................5-12 rake levers, lubricating .......................8-26 raking....................................................7-3

ables, checking and lubricating .........8-25 anister.................................................8-10 are ........................................................9-1 atalytic converter................................5-18 enterstand and sidestand, hecking and lubricating ....................8-26

oolant .................................................8-14

ata recording, vehicle.........................11-2 iagnostic connector............................11-2 immer/Pass switch.............................5-11

ergency mode..................................8-37 gine break-in.......................................7-1 gine oil and oil filter element.............8-10 gine overheating ...............................8-36 gine serial number ............................11-1 gine trouble warning light ...................5-1

F

Final transmission oil ............................ 8-13 Front and rear brake lever free play,

checking............................................. 8-22 Front and rear brake pads, checking ... 8-23 Front fork, checking ............................. 8-27 Fuel....................................................... 5-16 Fuel consumption, tips for reducing ...... 7-4 Fuel tank cap........................................ 5-15 Fuel tank overflow hose ....................... 5-17 Fuses, replacing ................................... 8-30

H

Handlebar position, adjusting .............. 5-22 Handlebar switches.............................. 5-10 Hazard switch....................................... 5-11 High beam indicator light ....................... 5-1 Horn switch .......................................... 5-11

I

Identification numbers.......................... 11-1 Ignition circuit cut-off system............... 5-25 Indicator lights and warning lights ......... 5-1

K

Key, handling of smart and mechanical keys................................... 4-3

L

Labels, location ...................................... 1-1 License plate light bulb, replacing........ 8-32

M

Main switch ............................................ 4-7 Maintenance and lubrication, periodic ... 8-4 Maintenance, emission control

system.................................................. 8-3 Maintenance record ............................. 11-6 Matte color, caution ............................... 9-1

Mo Mu

N

No O

Op s

P

Pa Pa Pa Pa Po

S

Sa Sa Sa Sh

a Sid Sm Sm Sm Sm Sm Sp Sp Sp St St St St St St

Index

12

T

V

W

Y

UB5X10E0.book Page 2 Thursday, May 27, 2021 8:55 AM

12-2

Tachometer ............................................ 5-2 Throttle grip and cable,

checking and lubricating .................... 8-25 Throttle grip free play, checking........... 8-19 Tires...................................................... 8-20 Tool kit .................................................... 8-2 Traction control system........................ 5-13 Traction control system indicator light ... 5-1 TRIP/INFO switch ................................. 5-11 Troubleshooting.................................... 8-33 Troubleshooting chart .......................... 8-35 Turn signal indicator lights ..................... 5-1 Turn signal light bulb, replacing ........... 8-31 Turn signal switch................................. 5-11

Valve clearance .................................... 8-20 V-belt, checking.................................... 8-25 Vehicle Emission Control Information

label.................................................... 11-2 Vehicle identification number ............... 11-1 Vehicle lights ........................................ 8-31

Warranty, extended ............................ 11-10 Warranty, limited .................................. 11-8 Wheel bearings, checking .................... 8-28 Wheels.................................................. 8-22 Windshield ............................................ 5-20

Yamalube.............................................. 8-12

UB5X10E0.book Page 3 Thursday, May 27, 2021 8:55 AM

EAU55803

ts as the ones originally come to expect. Why settle for

tandards for quality and right and perform right right

are products. Theyre formulated ow your Yamaha from the inside

at the technicians at your aler or you can order them

UB5X10E0.book Page 1 Thursday, May 27, 2021 8:55 AM

Fo

Ge eq aft

Ge pe ou

Ya an ou

Ge au dir

Ge

Fin Fo Fo

r your best ownership experience, think Genuine Yamaha!

nuine Yamaha Parts Genuine Yamaha replacement parts are the exact same par uipped on your vehicle, providing you with the performance and durability you have ermarket parts that may not provide full confidence and satisfaction?

nuine Yamaha Accessories Yamaha only offers accessories that meet our high s rformance. Buy with confidence, knowing your Genuine Yamaha Accessories will fit t of the box.

malube Take care of your Yamaha with legendary Yamalube oils, lubricants, and c d approved by the toughest judges we know: the Yamaha engineering teams that kn t.

nuine Yamaha Service Manuals Get the same factory manual for your vehicle th thorized Yamaha dealer use. Service manuals are available through your Yamaha de ectly through yamahapubs.com (for US consumers only).

nuine Yamaha products are available only from your Yamaha dealer.

d out more at: r US consumers, please visit yamaha-motor.com r Canadian consumers, please visit yamaha-motor.ca

DIC183

PRINTED IN

Manualsnet FAQs

If you want to find out how the CZD300N Yamaha works, you can view and download the Yamaha CZD300N XMAX 2022 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha CZD300N as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha CZD300N. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha CZD300N XMAX 2022 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha CZD300N XMAX 2022 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha CZD300N XMAX 2022 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha CZD300N XMAX 2022 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha CZD300N XMAX 2022 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.