Contents

Yamaha CC-50 Mini Component System Owner's Manual PDF

1 of 48
1 of 48

Summary of Content for Yamaha CC-50 Mini Component System Owner's Manual PDF

Active Servo

Technology

CC-50 Natural Sound Mini Component System

Chane Mini de la srie Natural Sound Natural Sound Mini Komponenten-System Natural Sound Mini Komponent System

Sistema di Componenti Mini a Suono Naturale Sistema de Componentes con Sonido Natural

Natural Sound Mini Component Systeem

OWNERS MANUAL MODE DEMPLOI

BEDIENUNGSANLEITUNG BRUKSANVISNING

MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

CC-50: RX-S50 + CDX-S50 + KXW-S70 + NX-S50

Remote control transmitter Tlcommande Fernbedienung Fjrrkontroll Telecomando Controlador remoto Afstandbediening

Batteries (size AA, UM/SUM-3, R6, HP-7) Piles (format AA, UM/SUM-3, R6, HP-7) Batterien (Gre AA, UM/SUM-3, R6, HP-7) Batterier (Storl. AA, UM/SUM-3, R6, HP-7) Batterie (dimensioni AA, o UM/SUM-3, o R6, o HP-7) Pilas (tamao AA, tipo UM/SUM-3, R6, HP-7) Batterijen (maat AA, UM/SUM-3, R6, HP-7)

AM (MW/LW) loop antenna Cadre-antenne AM (PO/GO) MW/LW-Rahmenantenne MV/LV ramantenn Antenna ad anello per AM (MW e LW) Antena de cuadro AM (OM/OL) AM (MW/LW) lusantenne

Indoor FM antenna Antenne intrieure FM UKW-Innenantenne FM inomhusantenn Antenna FM per interni Antena interior de FM FM binnenantenne

Speaker cords Cbles denceintes Lautsprecheranschlukabel Hgtalarledningar Cavi per gli altoparlanti Cables de los altavoces Luidsprekerdraden

SUPPLIED ACCESSORIES After unpacking, check that the following parts are contained. ACCESSOIRES FOURNIS Aprs le dballage, vrifier que les pices suivantes sont incluses. MITGELIEFERTES ZUBEHR Nach dem Auspacken berprfen, ob die folgenden Teile vorhanden sind. MEDFLJANDE TILLBEHR Kontrollera efter det apparaten packats upp att fljande delar finns med. ACCESSORI IN DOTAZIONE Verificare che tutte le parti seguenti siano contenute nellimballaggio dellapparecchio. ACCESORIOS INCLUIDOS Desembale el aparato y verificar que los siguientes accesorios estn en la caja. BIJGELEVERDE ACCESSOIRES Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.

This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC.

Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE.

Diese Gerte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG.

Dette apparat overholder det gaeldende EF-direktiv vedrrende radiostj.

Questo apparecchio conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi.

Este producto est de acuerdo con los requisitos sobre interferencias de radio frequencia fijados por el Consejo Directivo 87/308 CEE.

Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG.

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

INTRODUCTION

CONTENTS

E-1

E n

g lish

ENGLISH

Page PRECAUTIONS..................................................................2-3 ACTIVE SERVO TECHNOLOGY ..........................................3 NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS........................................................4-6 REMOTE CONTROL TRANSMITTER................................7-9 PREPARATION FOR USE .............................................10-11 OPEN/CLOSE THE CONTROL DOOR ...............................12 TURNING THE POWER ON/OFF TO THIS SYSTEM.........12 SETTING THE CLOCK ........................................................13 SOUND CONTROL..............................................................14

Page DIGITAL SOUND FIELD PROCESSOR (DSP) CONTROL............................................................................14 COMPACT DISC PLAYER OPERATION.......................15-22 TUNING OPERATION ....................................................23-25 TAPE DECK OPERATION ............................................26-29 RECORDING A COMPACT DISC ..................................30-35 OTHER RECORDINGS...................................................36-37 HOW TO USE THE BUILT-IN TIMER.............................38-41 USING EXTERNAL UNITS.............................................42-43 MAINTENANCE ...................................................................43 SPECIFICATIONS................................................................44 TROUBLESHOOTING .........................................................45

Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.

FEATURES

35W + 35W (6) RMS Output Power, 0.08% THD, 5020,000 Hz

4-Mode Digital Sound Field Processor (DSP) Digital Sound Field Effective Even by Listening

with Headphones Random Access Programmable CD Playback Single Track/Entire Disc Repeat Play Random-sequence Play Automatic Synchronized Recording with CD

Playback Automatic CD Editing Function for Recording to

Tape

Double Cassette Tape Deck with Automatic Reversing Function

2-Way Speed Dubbing Dolby B/C Noise Reduction System 40 Station Automatic Preset Tuning Multi-Use Timer/Sleep Timer Active Servo Processing Speaker System

(NX-S50) Remote Control Capability

NOTE Please check the copyright laws in your country to record from records, compact discs, radio, etc. Recording of copyright material may infringe copyright laws.

IMPORTANT Please record the serial number of this unit in the space below.

Serial No.:

The serial number is located on the rear of the unit. Retain this Owners Manual in a safe place for future reference.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION (FOR CANADA MODEL) TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

FOR CANADIAN CUSTOMER THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN DEPARTMENT OF COMMUNICATION.

E-2

PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT

CD pickup Leave the power on with no disc in the unit until normal playback is possible (about 1 hour).

Tape head Leave the power on with no cassette in the unit until normal playback is possible (about 1 hour). Note If condensation forms on the tape head, foreign matter may accumulate during use.

Remote control Wipe off condensation on the transmitter window with a soft cloth before operating the unit.

CAUTION FOR CARRYING THE CD PLAYER Be sure not to carry or tip the CD player with discs remaining in it.

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

This system is equipped with the newly developed Active Servo Processing Speaker System. It is not designed for use with conventional speakers. Therefore, do not attempt to connect other speakers than the provided speaker system.

Choose the installation location of this unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from sources of hum such as transformers and electric motors.

Do not operate this unit upside-down. It may overheat, possibly causing damage.

Never open the cabinet. If something drops into the set, contact your dealer.

The openings on the cabinet assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the cabinet will rise rapidly and eventually damage the circuits. Therefore, avoid placing objects against these openings and do not install the unit where the flow of air through the ventilation openings could be impeded.

Always set the VOLUME control to 0 before starting the audio source play: increase the volume gradually to an appropriate level after the play has been started.

When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet.

Grounding or polarization Precautions should be taken so that the grounding or polarization of an appliance is not defeated.

Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wire itself.

Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

Be sure to read the TROUBLESHOOTING section regarding common operating errors before concluding that the unit is faulty.

To prevent lightning damage, disconnect the AC power plug and the antenna cable when there is an electrical storm.

Do not plug the AC power plug to the wall socket before you finish all connections.

Never allow metallic items (e.g. screwdrivers, tools, etc.) to come near the cassette decks record/playback head assembly in this unit. Doing so may not only scratch or damage the heads mirror- smooth finish, it may change the magnetic characteristics of the heads, causing a deterioration in reproduction performance quality.

Although the cassette decks record/playback heads used in this unit are high quality heads with outstanding reproduction characteristics, they can become dirty through the use of old tapes or from dust accumulation over time. This can have a serious effect on reproduction quality. Clean the heads regularly with one of the commonly available head cleaners or with cleaning solutions.

The voltage to be used must be the same as that specified on this unit. Using this product with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

The sound level at a given volume setting depends on a combination of speaker efficiency, location and many other factors. Care should be taken to avoid exposure to sudden high levels of sound, which may occur when turning on the unit with the volume control setting at high, and to continuous high levels of sound.

Sudden temperature changes and storage or operation in an extremely humid environment may cause condensation inside the cabinet. Condensation can cause the unit to malfunction. Follow the procedure below to eliminate condensation.

For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT: The wire in the mains lead are coloured in accordance with the following code:

Blue: NEUTRAL Brown: LIVE

The colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug. Proceed as follows: the wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.

ACTIVE SERVO TECHNOLOGY

Active Servo Processing Amplifier

Port

Cabinet

High- amplitude bass sound

Signals of low amplitude Negative-impedance output drive

Air woofer (Helmholtz resonator)

Signals

E-3

E n

g lish

The theory of the Active Servo Technology is based upon two major factors, the Helmholtz resonator and negative- impedance drive. Active Servo Processing speakers reproduce the bass frequencies through an air woofer, which is a small port or opening in the speakers cabinet. This opening is used instead of, and performs the functions of, a woofer in a conventionally designed speaker system. Thus, signals of low amplitude within the cabinet can, according to the Helmholtz resonance theory, be output from this opening as waves of great amplitude if the design is such that the size of the opening and the volume of the cabinet are in the correct proportion to satisfy a certain ratio. In order to accomplish this, moreover, the amplitudes within the cabinet must be both precise and of sufficient power because these amplitudes must overcome the load presented by the air that exists within the cabinet.

Thus it is this problem that is resolved through the employment of a design in which the amplifier functions to supply the signals. If the electrical resistance of the voice coil is reduced to zero, the movement of the speaker unit would become linear with respect to signal voltage, and, to accomplish this, a special negative-impedance output-drive amplifier for subtracting output impedance of the amplifier is used. By employing negative-impedance drive circuits, the amplifier is able to generate precise, low-amplitude low-frequency waves with superior damping characteristics, and these waves are then radiated from the cabinet opening as high- amplitude signals. The system can, therefore, by employing the negative-impedance output drive amplifier and a speaker cabinet with the Helmholtz resonator, reproduce an extremely wide range of frequencies with amazing sound quality and less distortion. The features described above are combined to be the fundamental structure of the Active Servo Technology.

CAUTION 1 Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION 2 As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT

WARNING

To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior. (Europe and U.K. model only)

Laser Diode Properties Material: GaAlAs Wavelength: 780nm Emission Duration: continuous Laser Output: max. 44.6W* * This output is the value measured at a distance of about 200mm

from the objective lens surface on the Optical Pick-up Block.

CLASS 1 LASER PRODUCT

APPAREIL LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS

E-4

CD Player (CDX-S50)

1. Disc Table 2. RESUME button 3. OPEN/CLOSE Button: 4. RANDOM Play Button 5. SKIP Buttons: /

(SEARCH Buttons: / ) 6. Stop Button: 7. Play/Pause Button: / 8. Track Number Indicator 9. Time Display

10. (S, F) REPEAT Indicator 11. RANDOM Play Indicator 12. PROGRAM Indicator 13. Music Calendar Indicator 14. Music Calendar OVER Indicator 15. Tape Side Indicator 16. EDIT Indicator 17. Play Indicator:

Receiver (RX-S50)

18. Effect Level Indicator 19. Phones Mode Indicator 20. Preset Number Indicator 21. Band Indicator 22. Station Frequency Indicator 23. DSP ON/OFF Indicator 24. DSP Mode Indicators 25. MEMORY Indicator 26. AUTO TUNING Indicator 27. STEREO Indicator 28. TIMER Set Indicator 29. SLEEP Indicator

30. POWER Switch 31. DSP ON/OFF Selector Button 32. Remote Control Sensor 33. DSP MODE Selector Button 34. SP/PHONES Mode Selector Button 35. INPUT Selector Buttons: / 36. VOLUME Control 37. PHONES Jack 38. DISPLAY Button 39. TUNER PRESET DOWN/UP Buttons 40. A/B/C/D/E (TIMER) Button 41. MEMORY (TIME ADJUST) Button 42. TUNING DOWN (HOUR) Button 43. TUNING UP (MINUTE) Button 44. AUTO/MANL (SEC) Button 45. BAND Selector Button 46. AUTO MEMORY (TIMER REC) Button 47. BASS Tone Control 48. TREBLE Tone Control 49. BALANCE Control

30 32 35 36

37 38

39 40

41 42

43 44

45 46

47 48

49

31 33 34

STEREOAUTO TUNING

PRESET

MHz MEMORY SLEEPTIMER

HALL DISCO

CHURCH JAZZ CLUB

DSPON OFF

OVER A B

TRACK TOTALREMAIN RANDOM PROG

EDIT

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

SF REP

HALL DISCO

CHURCH JAZZ CLUB

1 20

DSPON OFF

8 9 10 11 12

13 16 171514

18 19 18 20 22

28 292726252423

21

For CD Player

For Receiver

1

4 5

2 3

6 7

E-5

E n

g lish

NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS

Double Cassette Tape Deck (KXW-S70)

50. DECK A Cassette Compartment 51. DECK A Select Button and Indicator 52. DECK B Select Button and Indicator 53. DECK B Cassette Compartment 54. Stop Button: 55. Play Direction Indicator ( ) 56. DECK A EJECT Button 57. Fast Wind Button: 58. Play Button: 59. Reverse Mode Switch 60. DUBBING (NORMAL/HIGH) Buttons and

Indicators 61. REC/PAUSE Button and Indicator 62. Dolby NR Switch 63. Play Button: 64. Fast Wind Button: 65. DECK B EJECT Button 66. Play Direction Indicator ( ) 67. PLAY Indicator

Speakers (NX-S50)

68. YST Port 69. Speaker Terminals

50 51 52 53

54 55

56 57

58 59

60 61 62

63 64

65

66 67

68

69

E-6

NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS

FREQUENCY STEP switch (General model only) Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area. Before setting this switch, disconnect the AC supply lead of this unit from the AC outlet.

Rear Panel of Receiver

1. Antenna Terminals 2. INPUT (PHONO and AUX) Terminals 3. GND Terminal 4. SPEAKERS Terminals 5. VOLTAGE SELECTOR (General model only) 6. FREQUENCY STEP Switch (General model only) 7. System Control Sockets 8. AC Supply Lead

VOLTAGE SELECTOR (General model only) The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110/120/220/240V AC, 50/60 Hz.

Rear Panel of Cassette Tape Deck

9. System Control Connector

Rear Panel of CD Player

10. System Control Connector

10

9

1 2 3 4 5

6 7 8

Names of control buttons

Receiver Control Buttons

1. Remote Control Transmitter Window 2. Preset Station Number Buttons 3. A, B, C, D, E Selector Buttons 4. PRESET DOWN/UP Buttons 5. A/B/C/D/E Button 6. EFFECT LEVEL Down ()/Up (+) Buttons 7. POWER Switch 8. SLEEP Button 9. DISPLAY Button

10. DSP On/Off Button 11. VOLUME Down ()/Up (+) Buttons 12. DSP MODE Selector Button 13. SP/PHONES Mode Selector Button 14. Input Selector Buttons

E-7

E n

g lish

REMOTE CONTROL TRANSMITTER

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

1

2

3

4

5

6

7

8 9 10 11

14

13

12

CD Player Control Buttons

15. Track Number Input Buttons 16. TIME Button 17. SKIP Buttons: /

(SEARCH Buttons: / ) 18. REPEAT Button 19. RANDOM Button 20. STOP Button: 21. PLAY/PAUSE Button: 22. EDIT Button 23. TAPE Button 24. PROGRAM Button

Tape Deck Control Buttons

25. Play Button: 26. Stop Button: 27. Play Button: 28. DECK A/B Select Button 29. Fast Wind Button: 30. REC/PAUSE Button: 31. Fast Wind Button:

E-8

REMOTE CONTROL TRANSMITTER

- +

RANDOM TAPEPLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

A/B

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

28

29

25 26 27

31

30

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSEDECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

15

16 17

18 19

24

20

23

22

21

E-9

E n

g lish

30 30

Remote control sensor

0.2 m 6 m (8 20)

Loading the batteries for the remote control transmitter 1 Remove the battery compartment cover.

(Press the left edge of the cover to right with a finger, and then pull it upward.)

2 Insert 2 AA size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment. * Installing the batteries improperly may cause failure.

3 Replace the battery compartment cover.

Precautions for battery use Insert the batteries according to the direction indicated in

the battery compartment. Replace all batteries with new ones at the same time. Remove the batteries if they are weak or if the unit is not

in use for long periods. Dont mix normal batteries with rechargeable batteries.

Proper use of the remote control transmitter Aim (within the range of 60 with no obstacles) the remote control transmitter at the remote control sensor and operate as shown.

Notes concerning use Replace the batteries if control distance decreases or

operation becomes unstable. Periodically clean the transmitter window on the remote

control transmitter and the sensor on the main unit with a soft cloth.

Exposing the sensor on the main unit to strong light (especially an inverter type of fluorescent lamp etc.) may interfere with operation. In this case, reposition the main unit to avoid direct lighting.

Keep the remote control transmitter away from moisture, excessive heat, shock and vibrations.

The remote control transmitters usable range is within 0.2m (8) and 6m (20) away from the sensor.

REMOTE CONTROL TRANSMITTER

2

3

1

E-10

AM ANT

GND

FM ANT

75 UNBAL.

Placing the system This system can be placed any way you like, however, be sure not to place another unit or any object on top of the receiver to prevent the ventilation holes on the top panel of the receiver from being obstructed. If doing so, it may damage the receiver.

Notes If the system is put in a rack, allow a space of at least 5

cm (1-15/16) above and behind the unit. Disconnect the AC supply lead from the AC outlet before

connecting or disconnecting any component.

Antenna connection (1) Supplied FM antenna

Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire to the direction where the strongest signal can be received.

(2) Supplied AM (MW/LW) loop antenna

Connect the AM (MW/LW) loop antenna wire to the corresponding terminals. Position the AM (MW/LW) loop antenna for optimum reception. Place the AM (MW/LW) loop antenna on a shelf etc., or install it on the rack or wall with screws (not supplied).

Notes When static is still heard even after adjusting the position

of the AM (MW/LW) loop antenna, try reversing the connection (top to bottom).

Do not place the AM (MW/LW) loop antenna on the unit. It will result in noise generation, since the unit is equipped with digital electronics. Place the AM (MW/LW) loop antenna away from the unit.

(3) External FM antenna

Use an external FM antenna instead of an indoor FM antenna if you need better reception. Consult your dealer.

(4) External AM (MW/LW) antenna

Use an external AM (MW/LW) antenna if you need better reception. Consult your dealer.

Note When using an external AM (MW/LW) antenna, be sure to keep the wire of the AM (MW/LW) loop antenna connected.

PREPARATION FOR USE

AM ANT

GND

FM ANT

75 UNBAL.

or

Earth rod

7.5 m (25 feet)

15 m (49 feet)

* For U.K. and Europe models, AM is replaced by MW LW.

RX-S50 CDX-S50

KXW-S70

KXW-S70

RX-S50

CDX-S50

Placing examples

(1

(2

(3 (4

E-11

E n

g lishSpeaker connection

Connect each speaker wire to the SPEAKERS terminals.

Cautions Do not let the bare speaker wires touch each other as this

could damage the receiver and/or speakers. When connecting the speakers to the unit, be sure to

connect the speaker wires properly. Do not mistake the right channel for the left channel and the plus (+) terminal for the minus () terminal.

Do not connect these SPEAKERS terminals to speakers other than the provided speaker system NX-S50.

System connection Connect the red connector on the rear of CDX-S50 to the

red socket on the rear of RX-S50. Connect the black connector on the rear of KXW-S70 to

the black socket.

How to disconnect the system connector Grasp both sides of the connector to disconnect the connector.

Connecting the AC supply lead After connecting the speakers and system connectors,

plug the AC supply lead into a convenient AC outlet. Unplug the AC supply lead from the AC outlet if the unit is

not to be used for a long period of time.

PREPARATION FOR USE

R L

(Black wire with white line plus (+) terminal, black wire minus () terminal)

To an AC outlet

RX-S50

CDX-S50

KXW-S70

OPEN/CLOSE THE CONTROL DOOR

When it is not necessary to operate controls inside the control door, close the door.

To open or close the door, press the right edge until it clicks.

E-12

STANDBY mode While the power is on, pressing the POWER switch (or the POWER switch on the remote control transmitter) switches the system to the STANDBY mode. (In this mode, the display shows only the time.) In this mode, main voltage is still present inside the system. If you want to switch off the system completely, disconnect the AC power plug from the AC outlet.

TURNING THE POWER ON/OFF TO THIS SYSTEM

If the AC supply lead is connected to the AC outlet, this system can be turned ON and OFF (STANDBY mode) by pressing the POWER switch on the front panel of the receiver or the POWER button on the remote control transmitter.

- +

RANDOM TAPEPLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

A/B

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

E-13

E n

g lish1 While the power is on, press the DISPLAY button to

display the time. If the power is off, you can proceed to the next step.

2 While pressing the TIME ADJUST button, press the HOUR button and set the hour. * Press the HOUR button once to advance the time by 1

hour. Press and hold to advance continuously.

3 While pressing the TIME ADJUST button, press the MINUTE button and set the desired time. * Press the MINUTE button once to advance the time by

1 minute. Press and hold to advance continuously. * The hour setting will not advance even if the minute

advance from 59 to 00.

To display the time by second While pressing the SEC button, the current time is displayed by minute and second.

To reset the second to 00 While pressing the SEC button, press the TIME ADJUST button. * If the current second is lower than 30, it is reset to 00. * If the current second is higher than 30, the minute is

advanced by 1 minute and the second is reset to 00. (If the current minute is 59, in this case, the hour is also advanced by 1 hour.)

In the event of a power failure or when the AC supply lead is disconnected. The time display will go out, however, the clock will function for about 30 minutes without power supply. So you do not have to reset the time if the AC power supply is resumed within about 30 minutes. When the AC power supply is resumed after more than 30 minutes pass without power supply, the time display will flash on and off to indicate that the time must be reset.

Note If this system is left for several minutes without setting the time after the AC power lead of this system is connected to the AC outlet, there may be a case that the display is turned into a demonstration mode. (This mode is virtually unnecessary for using this system.) In this case, first turn the power on by pressing the POWER switch to cancel the mode, and then set the time.

DISPLAY

MEMORY

TIME ADJ

DOWN UP TUNING

HOUR MINUTE

MEMORY

TIME ADJ

DOWN UP TUNING

HOUR MINUTE

SETTING THE CLOCK

Changes.

Changes.

1

2

3

The Digital Sound Field Processor (DSP) built into this unit presents you with the ambience of an actual concert hall, jazz club, etc. by adding effects as sonic reflections or reberverations that create the sound environment of a hall etc.

This unit provides the following 4 DSP modes that simulates actual sound environments.

E-14

DIGITAL SOUND FIELD PROCESSOR (DSP) CONTROL

VOLUME

0 I0

- + VOLUME

SOUND CONTROL

Volume Front panel operation Rotate the VOLUME control towards 10 to increase the volume, and towards 0 to decrease the volume.

Remote control operation Press the VOLUME + button to increase the volume and the VOLUME button to decrease the volume.

Balance Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from the speaker settings or the listening room condition. Turn this clockwise to emphasize the right and counterclockwise for the left.

Tone BASS : Turn this clockwise to increase (or counter-

clockwise to decrease) the low frequency response.

TREBLE : Turn this clockwise to increase (or counter- clockwise to decrease) the high frequency response.

BALANCE

L R

BASS TREBLE

+ +

Mode

HALL

DISCO

CHURCH

JAZZ CLUB

Feature

This mode is suitable for reproducing live recordings of pop or rock music including vocals. You can obtain sound expansion and reverberations of a hall by this mode.

You can enjoy an atmosphere of disco with lively bass and powerful sound field.

This mode creates a rich sound field of church with long reverberations. It is suitable for vocals etc.

This mode creates a sound field with much presence adding spatial effect as if music instruments are coming in front.

HALL

DISCO

CHURCH

JAZZ CLUB

MODE

E-15

E n

g lish

COMPACT DISC PLAYER OPERATION

DIGITAL SOUND FIELD PROCESSOR (DSP) CONTROL

Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. Do not write on either side of the disc, particularly the non-

label side. Signals are read from the non-label side. Do not mark this surface.

Keep your discs away from direct sunlight, heat and excessive moisture.

Always hold the CDs by the edges. Fingerprints, dirt or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the center, along the radius.

Listening to the music with the DSP 1 Press the DSP ON/OFF switch so that ON DSP

illuminates on the display.

2 Select a desired DSP mode by pressing the DSP MODE selector button once or more until the name of the mode appears on the display.

3 Playback a source. (For source playback, refer to other sections described later.)

4 Adjust the level of effects by pressing the EFFECT LEVEL down () or up (+) button. * Effect level can be checked with the effect level indicator

on the display.

If you will not use the DSP Press the DSP ON/OFF switch so that DSP OFF illuminates on the display.

When listening with headphones Press the SP/PHONES mode button so that the phones mode indicator is illuminated on the display. You can obtain a DSP effect suitadle for the headphone listening. If not using headphones, the SP/PHONES mode button should be set so that the phones mode indicator is not illuminated on the display.

Note DSP effect is also recorded along with a source. If you wish to record a source without DSP effect, turn the DSP off when recording.

Receiver

HALL

DSPON

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

1 2

4 2

1

Phones mode indicator

Receiver

E-16

CD playback 1 Select the CD player so that CD appears on the display

by pressing the INPUT selector or button.

2 Press the OPEN/CLOSE button to open the disc table.

3 Place a disc on the table, label side up. * 8 cm (3) disc can be played without an adaptor.

4 Press the OPEN/CLOSE button to close the disc table. * The total number of tracks and the total playing time of

the disc will be displayed for several seconds. * The music calendar will be displayed only for the

number of tracks on the disc. * If the compact disc contains more than 21 tracks, the

OVER indicator will light up on the music calendar.

5 Press the play/pause button to start playback from track 1. * The indicator will appear and playback will begin.

As the playback of each track on the music calendar is finished, that track number will go out.

To interrupt playback

1 Press the play/pause button. * The indicator will flash.

2 Press the play/pause button to resume playback from the same point.

To stop playback Press the stop button.

To switch the unit off after use Turn the unit off by pressing the POWER switch. (The indicators will go off except for the current time display.)

COMPACT DISC PLAYER OPERATION

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

POWER

POWER

Total number of tracks

Music calendar Total playing time

Receiver

CD Player

1

2, 4

1

3

5, 1, 2

5, 1, 2

TRACK TOTAL

2 3 4 5 6 7 8 9 10 11 12

HALL

1

DSPON

E-17

E n

g lish

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

E

+I0

TUNER DIRECT

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

COMPACT DISC PLAYER OPERATION

Direct operation Even when an input source other than CD player is selected, pressing the play/pause button, a track number input button or the RANDOM play button, or pressing the front edge of the disc table gently will start playback directly. In this case, if the tape deck is playing back a tape, it will be stopped automatically. * These ways of playback can also be used to close the disc

table. If the table is closed in these ways, playback will begin automatically, however, the display will not show the total number of tracks and the total playing time of the disc.

Precautions If TV or radio interference occurs during CD player

operation, move the unit away from the TV or radio. Subjecting the unit to shock or vibration can cause

mistracking. Playing some compact discs at high volume can cause

mistracking. In this case, listen at lower volume. Do not push the disc table while it is moving. If the power fails while the table is open, wait until the

power supply returns or gently push the table manually to close it.

The temperature range for playing compact discs is recommended to be 5C (41F) 35C (95F).

Direct-selection play By using the track number input buttons on the remote control transmitter, any track you wish to listen to can be played directly.

Use the track number input buttons to select the desired track number. Play will begin automatically.

A. For example, to choose selection 5 Press the 5 button.

B. For example, to choose selection 12 (1)Press the +10 button. (2)Within 3 seconds, press 2 button.

C. For example, to choose selection 20 (1)Press the +10 button. (2)Within 3 seconds, press the +10 button again. (3)Within 3 seconds, press the 0 button.

Note A track number higher than the number of tracks on the disc cannot be selected. Also, if a higher track number is selected while the disc table is open, play will begin from the last track on the disc when the disc table is closed.

E-18

COMPACT DISC PLAYER OPERATION

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Skip search and Manual search are performed using the same buttons.

Skip search The beginning of any track can be found automatically.

1 Load a disc and begin playback.

2 Press the button to advance or button to reverse through the disc. Press once for each track to be advanced or reversed. Press once to advance to the track following the

one now playing back. Press once to return to the start of the track now

playing back. Press twice to return to the track before the track

now playing back.

Notes This function can also be performed while the unit is

stopped. Press the play/pause button when your desired track number appears in the track number display. Playback will begin from the beginning of the track.

This function will be performed forward or backward from any point on the disc. However, it will not move forward during playback of the final track.

Manual search 1 Begin playback.

2 Press and hold the button to advance play rapidly, and the button to reverse play rapidly. * The sound can be heard (although slightly garbled)

during manual search in either direction. This is convenient for reviewing the contents quickly.

Note Manual search can also be performed while playback is paused, though no sound will be heard.

CD Player 1

2

1 2

E-19

E n

g lish

COMPACT DISC PLAYER OPERATION

Program play You can program up to 20 tracks in any desired order.

1 Load a disc and close the disc table.

2 When in the stop mode, press the PROGRAM button to prepare for programming. * PROG and P-01 illuminate on the display, and all

track numbers on the disc begin flashing.

3 Use the track number input buttons to select the desired track number. * The selected track number and the total play time of

the programmed tracks will illuminate on the display, and soon it is replaced by the display of the next playback order. Programmed track numbers will stop flashing and illuminate on the music calendar.

* Pressing the TIME button displays the total play time of the programmed tracks for about 1 second, and then it is replaced by the display of the next playback order.

* For example, to choose selection 12 (1)Press the +10 button. (2)Press the 2 button.

4 Repeat step 3 for any other track. Up to 20 tracks can be programmed.

5 Press the play/pause button to start playback of programmed tracks.

Notes It is also possible to program a sequence of tracks while

looking at the list of tracks on the surface of the disc before closing the disc table.

During playback or pause, programming is not possible. If the total time of the programmed tracks reaches 100

minutes or more, only the last two-digits will be displayed for the three-digit number.

The total time of the programmed tracks will not be displayed, if a track number higher than 19 is programmed.

Skip search can be performed during playing back, but only within the range of the programmed tracks.

Manual search can be performed during playing back to search through all tracks, including unprogrammed tracks.

Playback order

Music calendar

Selected disc Total playing time

Display information during programming

Selected track number

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

CD Player 6 1

5

3

2

TRACK PROG

2 3 4 5 6 7 8 9 10 11 12

HALL

1

DSPON

TRACK TOTAL PROG

2 3 4 5 6 7 8 9 10 11 12

HALL

1

DSPON

/

E-20

To stop program play

Press the stop button. The first track number programmed will be displayed.

To resume playback, press the play/pause / button. Playback will begin from the beginning of the program.

To cancel a programmed sequence

There are several methods as described below. Press the stop button while the unit is stopped. Open the disc table Switch off the power.

COMPACT DISC PLAYER OPERATION

To check program data

1. If during playing back, press the stop button. 2. Press the PROG button. 3. Each time the SKIP button is pressed, the track

numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button.

To correct program data

1. Follow the procedure described in To check program data.

2. Display the track number to be corrected by pressing the SKIP button.

3. Press a track number input button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed.

4. After the correction has been completed, press the PROG button or play/pause / button once again.

/ CD Player

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

PROG

E-21

E n

g lishRepeat play

An entire disc, a single track or a programmed sequence can be continuously repeated.

1 While watching the display, press the REPEAT button once or more to select a desired repeat play mode (S REP or F REP).

2 Press the play/pause button.

Repeat play modes

SINGLE REPEAT (S REP) A single track is played back repeatedly. * This is also available in the program play mode and the

random play mode. (If the repeat play mode is switched off, the program play mode or the random play mode will be resumed.)

FULL REPEAT (F REP) An entire disc is played back repeatedly. * In the random play mode, the disc is repeatedly played

back, but the order of tracks is different every time.

To cancel the repeat play

Press the REPEAT button once or more so that the (S, F) REP indicator goes out.

COMPACT DISC PLAYER OPERATION

CD Player

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

2

1 2

off S REP F REP

TRACK

2 3 4 5 6 7 8 9 10 11 12

HALL

DSPON

TRACK REMAIN

2 3 4 5 6 7 8 9 10 11 12

HALL

DSPON

TRACK TOTAL

2 3 4 5 6 7 8 9 10 11 12

HALL

DSPON

TRACK TOTALREMAIN

2 3 4 5 6 7 8 9 10 11 12

HALL

DSPON

E-22

Random play The tracks on the disc can be played back in a random order.

1 Load a disc and close the disc table.

2 Press the RANDOM button to begin random play. * The RANDOM indicator will light up.

To cancel the random play Press the stop button. The RANDOM indicator goes out.

Note This feature will not function during programming, or during program play.

Switching the time display Each time the TIME button is pressed, the display will change as described below.

[Example] When the second track is being played back (Refer to the illustration on the left.)

The elapsed play time for the track now playing back will be displayed. * 8 seconds have passed since the beginning of the

second track. The remaining play time for the current track will be

displayed. * 2 minutes and 58 seconds remain till the end of the

second track. The total play time of the disc will be displayed.

(If the unit is in the program play mode, the total play time of the programmed tracks will be displayed.)

The total remaining play time from the point being played at that time will be displayed. * 41 minutes remain till the end of the disc.

Notes During random play, the total remaining play time on the

disc will not be displayed. The total remaining play time will not be displayed for

track number 20 or higher.

COMPACT DISC PLAYER OPERATION

TIME

2 1

2

CD Player

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

E-23

E n

g lish

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (Automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (Manual tuning).

Automatic tuning 1 Select the tuner so that TUNER appears on the display

by pressing the INPUT selector or button.

2 Select the reception band [FM or AM (MW or LW)] by pressing the BAND button while watching the display.

3 Press the AUTO/MANL button so that AUTO TUNING appears on the display. (In this mode, stations are received in stereo or monaural automatically.)

4 Press the TUNING UP button to tune to a higher frequency, or press the TUNING DOWN button to tune to a lower frequency.

5 If the station where tuning search stopped is not the desired one, follow step 4 again.

* If the tuning search does not stop at the desired station, change to the Manual tuning method as described below.

* STEREO indicator will illuminate when an FM stereo broadcast with sufficient signal strength is received.

Manual tuning 1 Follow steps 1 and 2 of the Automatic tuning method.

2 Press the AUTO/MANL button so that AUTO TUNING disappears from the display. (In this mode, stations are received in monaural.)

3 Press and hold the TUNING UP button to tune to a higher frequency, or press and hold the TUNING DOWN button to tune to a lower frequency. Release it just before reaching the desired frequency, and then press it repeatedly until the desired frequency appears.

Note If you tune to an FM station manually, it is received in monaural automatically to increase the signal quality.

AM is for Australia and General models. MW/LW is for U.K. and Europe models.

TUNING OPERATION

Receiver

1

4, 3 3, 2 2

E-24

TUNING OPERATION

Preset tuning This unit can store station frequencies selected by tuning operation. With this function, you can select any desired station by only calling the corresponding preset station number. Up to 40 stations (8 stations x 5 areas) can be stored.

To store stations

(Example: To store a station to A1)

1 Tune to a desired station. (Refer to the previous page for tuning procedure.)

2 Press the MEMORY button. * The MEMORY indicator will flash for about 5 seconds.

3 Select a desired area (A E) by pressing the A/B/C/D/E button while watching the display, before the MEMORY indicator goes out. (In this case, select area A)

4 Select a preset station number by pressing the TUNER PRESET DOWN or UP button repeatedly before the MEMORY indicator goes out. (In this case, select 1.)

5 Within about 5 seconds, press the MEMORY button again.

* In the same way, program other stations to A2, A3 ... A8. * You can program more stations to the preset station

numbers on other areas in the same way by selecting other areas in step 2.

To recall a preset station

1 Select the area of preset station numbers by pressing the A/B/C/D/E button.

2 Select the desired preset station number by pressing the TUNER PRESET DOWN or UP button repeatedly.

Notes A new setting can be programmed in place of the former

one. For presets the setting of the AUTO/MANL button is

stored along with the station frequency.

For easier operation By using the preset station number buttons and the A,B,C,D,E selector buttons on the remote control transmitter, a preset station number and an area can be selected directly.

Shows the displayed station has been programmed to A1.

Receiver

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

4, 2

3, 1 2, 5

4, 2

3, 1 4, 2

3, 1

STEREOAUTO TUNING

PRESET

MHz

HALL

DSPON

E-25

E n

g lishAutomatic preset tuning

You can also make use of an automatic preset tuning function. By this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the previous page.

1 Select the tuner so that TUNER appears on the display by pressing the INPUT selector or button.

2 Press and hold the AUTO MEMORY button for about 2 seconds. * The MEMORY and AUTO TUNING indicators will flash.

This unit performs automatic tuning and received stations are programmed to A1, A2 ... A8 sequentially.

After the automatic preset tuning is completed The display shows the frequencies of the first preset station (stored to A1). Check the contents and the number of preset stations by following the procedure of the section To recall a preset station on the previous page.

To recall a preset station Simply follow the procedure of the section To recall a preset station on the previous page.

Notes The automatic preset tuning search will be performed

through all frequencies until 40 stations are stored. If the number of received stations is less than 40, the search will stop after searching through all frequencies.

With this function, only stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune to it in monaural manually and program it by following the procedure of the section To store stations on the previous page.

You can replace a preset station by another FM or AM (MW or LW) station manually by simply following the procedure of the section To store stations on the previous page.

TUNING OPERATION

Fundamental rules of internal automatic preset tuning operation Basically, FM stations are programmed onto area A, B and C, and AM stations are programmed onto area D and E (MW stations are onto D and LW stations are onto E) in that order automatically. * If, for example, the number of received FM stations is not

enough to fill up three areas (A, B and C), AM (MW or LW) stations are programmed closely from the preceeding empty areas. In such a case, AM (MW) stations are programmed from area B or C (and LW stations are from area C or D.)

* Moreover, one area is programmed with stations of the same band only. If, for example, the last FM station is programmed to B4, B5B8 will be programmed with no station, and AM (MW) stations are programmed from area C.

Memory back-up The memory back-up circuit prevents the programmed data from being lost even if the AC supply lead is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re- programmed by simply following the Preset tuning steps.

Receiver

1

2

E-26

Detection hole

Tab

TAPE DECK OPERATION

General information Do not use C-120 tapes, tapes with internal reels or poor-

quality tapes, since they can cause malfunctions. Before loading a tape into the cassette compartment,

tighten the slack tape with a pen or pencil. Tapes have removable tabs which prevent accidental

recording or erasing from taking place. Removing the tab on the top left protects the side facing you from erasure. Cover the tab holes with adhesive tape to erase or record again.

This deck is a Double Cassette Deck with Automatic Reverse Function. DECK A: Playback only. DECK B: Playback or recording.

This deck features an auto tape selector. Just load the tape, and the tape formula being used will be sensed automatically.

This unit can play back metal tapes as well as normal or chrome tapes, and recording can also be done on metal tapes.

When covering erasure prevention tab holes, do not cover the chrome and metal detection holes. Otherwise, the deck will treat tape as normal tape.

Do not press the EJECT button during playback or recording.

E-27

E n

g lishTape A or tape B playback

1 Select the tape deck so that TAPE appears on the display by pressing the INPUT selector or button.

2 Open the DECK A or DECK B cassette compartment by pressing the EJECT button.

3 Load the tape into the DECK A or DECK B cassette compartment, and close the lid panel completely by pressing the upper part of the center of the panel as figured left. * If you loaded two tapes into both the DECK A and B

cassette compartments, select the DECK A or B in which the tape to be played back is loaded by pressing the DECK A or B select button.

4 Set the Dolby NR switch to B or C if the tape has been recorded with Dolby noise reduction, and to OFF if Dolby NR was not used. * For selection of the Dolby B or C position, refer to the

Dolby B and C Type Noise Reduction on page 29.

5 Set the reverse mode switch as desired.

The reverse mode switch can be operated before or during playback, and changes tape playback as follows:

6 Press the play button to listen to side A, or the play button for side B.

To stop playback Press the stop button.

Note When removing the tape, press the stop button, and then open the cassette compartment.

Direct operation Even if an input source other than tape deck is selected, pressing the play button (or the fast wind button) will start playback (or fast winding) directly.

TAPE DECK OPERATION

3

DECK A select button

DECK B select button

Side A only

Side B only

Side A Side B

Side B only

Side A Side B Continuous play (8 times)

Side B Side A Continuous play (8 times)

Receiver

Tape Deck

2 5 6 6 4 2

1

E-28

Winding the tape 1 If during playback, first press the stop button.

2 Next press the fast wind or fast wind button to wind the tape.

3 Press the stop button to stop.

* While winding the tape, the corresponding play direction indicator flashes rapidly.

Note When the tape is wound to the end, this unit will then function as described below, according to the setting of the reverse mode switch.

: The tape stops at the end. : If the winding direction is , when the tape reaches

the end, playback automatically starts from the reverse side. If the winding direction is , the tape stops at the end.

: When the tape reaches the end, playback automatically starts from the reverse side.

Searching for the beginning of a desired selection Carry out the following operation during playback to find the beginning of a desired selection on the tape.

To listen to the same selection Press the button if the direction of the current playback is . Press the button if the direction of the current playback is .

To listen to the next selection Press the button if the direction of the current playback is . Press the button if the direction of the current playback is .

* While searching, the corresponding play direction indicator flashes slowly.

Notes This function may not work for tapes with

* Material with long pauses or quiet passages. * Low recording levels or excessive noise. * Pauses of less than 4 seconds between selections.

If searching is carried out at the first or the last part of a selection, the searching may not function correctly.

TAPE DECK OPERATION

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Tape Deck

E-29

E n

g lishContinuous playback

1 Load the tapes into the DECK A and DECK B cassette compartments.

2 Set the reverse mode switch to .

The reverse mode switch can be operated before or during playback, and changes tape playback as follows:

3 Press the DECK A or B select button to select the tape to be played back first.

4 Press the play button to listen to side A, or the play button for side B.

Tape A Side A B Tape B Side A B Continuous play (8 times)

Tape A Side B Tape B Side A B Tape A Side A Continuous play (8 times)

Dolby B and C Type Noise Reduction With cassette tapes, the most noticeable form of noise is high frequency hiss. To reduce this hiss noise, this unit has been equipped with a newly developed Dolby C noise reduction system in addition to its conventional Dolby B NR. Either type of noise reduction may be selected with the switch provided. Dolby B NR has a noise reduction effect of about 10 dB in the high frequency range. The corresponding figure with Dolby C NR is about 20 dB, but this is over the entire range where the human ear is most sensitive to noise (2 kHz to 8 kHz). Also, Dolby C NR has the same noise reduction effect at both high and low signal levels. In addition, Dolby C NR improves the tapes MOL (Maximum Output Level). Dolby noise reduction is a 2 part process that acts both on recording and playback; be sure that the noise reduction button is set to the same position on record and play. * Noise in the source material cannot be reduced with the

Dolby NR system.

Dolby and the double D mark are trademarks of Dolby Laboratories Licensing Corp. Dolby noise reduction system manufactured under license from Dolby Laboratories Licensing Corp.

DOLBY B.C NR

TAPE DECK OPERATION

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Tape Deck 3

4

4

3

1 2 4 4 1

Side A only

Side B only

Side A Side B

Side B only

Side A Side B

Side B only

When recording important selections, be sure to make a preliminary test to ensure that the desired source material is being properly recorded with good sound quality.

The automatic recording level control circuit automatically controls the level of the input signal used for recording.

Adjusting the VOLUME, BALANCE, TREBLE and BASS controls have no effect on the recorded sound. If, however, the DSP is on, the DSP effect is recorded along with the source. * Music with DSP effect is suitable for listening to inside

a car etc. For the tape deck, the deck which can be used for

recording is the DECK B only. When recording, be sure to load a tape into the DECK B cassette compartment.

CD synchronized recording 1 Select the CD player so that CD appears on the display

by pressing the INPUT selector or button, and load the disc to be recorded.

2 Load a tape into the DECK B cassette compartment. * Wind past the beginning part of the tape on which

recording can not be performed.

3 When recording with the Dolby NR system, set the Dolby NR switch to B or C; if not, set it to OFF. * For selection of the Dolby B or C position, refer to the

Dolby B and C Type Noise Reduction on page 29.

4 Set the reverse mode switch as desired.

When the tape is set so that side A faces you, recording will be done as follows automatically according to the selected reverse mode.

5 Press the REC/PAUSE button. * The corresponding indicator will light up and the play

direction indicators flash.

6 Start CD playback by pressing the play/pause button. * Before CD playback begins, recording automatically

begins on the side of the tape now selected.

E-30

RECORDING A COMPACT DISC

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Receiver

CD Player

Tape Deck

1

6

15

6

4 5 3 2

E-31

E n

g lish

To stop recording temporarily

1 Press the stop button of the CD player.

2 Choose the selection to be recorded next by using the SKIP or button, and then press the play button of the CD player to resume recording (or simply press the track number input button on the remote control transmitter).

To stop recording Press the stop button of the tape deck. (At this time, CD playback does not stop.)

Recording programmed tracks

Programmed tracks can also be recorded in the same way.

1 Program desired tracks. (Refer to page 19 for the programming procedure.)

2 Follow steps 25 on the previous page.

3 Press the play/pause / button of the CD player.

Notes During CD Synchronized Recording, when more than 4

seconds elapse between tracks, the tape will stop automatically and resume recording when the beginning of the next track is found.

The CD Synchronized Recording will function even when the CD player is turned into random play mode.

RECORDING A COMPACT DISC

/ CD Player

Tape Deck

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

/

E-32

Recording CD on both sides of a tape automatically 1 Select the CD player so that CD appears on the display

by pressing the INPUT selector or button, and load the disc to be recorded.

2 Load a tape into the cassette compartment.

3 When recording with the Dolby NR system, set the Dolby NR switch to B or C; if not, set it to OFF. * For selection of the Dolby B or C position, refer to the

Dolby B and C Type Noise Reduction on page 29.

4 Set the reverse mode switch to or .

5 Press the EDIT button. (EDIT appears on the display.) CD playback and recording starts. Recording is carried out on side A and B of the tape continuously. * If the tape has not rewound to the end, it is rewound to

the end rapidly before recording starts. Recording starts from the first part of the tape on which recording can be done.

* A (or B) on the display shows the side of the tape on which recording is being carried out.

* When the recording on side A finishes while a track is being played back, the sound is automatically faded out, and then the recording stops. The recording on side B starts from the beginning of the same track.

Note The CD players repeat play mode will be canceled during this recording mode.

Recording programmed tracks

Programmed tracks can also be recorded in the same way.

1 Program desired tracks. (Refer to page 19 for the programming procedure.)

2 Follow steps 25 described above.

To cancel this function Before recording, press the stop button of the CD player or the tape deck.

To stop recording Press the stop button of the tape deck. (At this time, CD playback automatically stops.)

RECORDING A COMPACT DISC

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Receiver

CD Player

Tape Deck

1

1

5

1

4 3 2

E-33

E n

g lishAutomatic tape-editing

This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tapes total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape.

To record a disc with the order of tracks unchanged

1 Select the CD player so that CD appears on the display by pressing the INPUT selector or button, and load the disc to be recorded.

2 Load a tape into the cassette compartment.

3 When recording with the Dolby NR system, set the Dolby NR switch to B or C; if not, set it to OFF. * For selection of the Dolby B or C position, refer to the

Dolby B and C Type Noise Reduction on page 29.

4 Set the reverse mode switch to or .

5 Press the TAPE button to select the length of the tape to be used. Whenever pressed, C-46, C-54, C-60 and C-90 appear on the display in turn, and next it returns to the normal display mode.

When using tapes other than C-46, C-54, C-60 or C-90 When C-46, C-54, C-60 or C-90 is appearing on the display, input the tape length by using the track number input buttons on the remote control transmitter (Examples) C-62: Press 6 and then 2. C-30: Press 3 and then 0, or press +10 three times

and then 0.

6 Press the EDIT button. (EDIT appears on the display.) The following internal operations are carried out before recording is automatically started.

1)Tracks on the disc are automatically divided between side A and side B. You can check the process by watching the display.

2)The end part of the tape on which recording cannot be done is wound.

3)This unit starts searching for a peak level through all tracks to be recorded. (While searching, LEVEL flashes on the display.) When searching is finished, this unit adjusts the recording level properly on the basis of this data.

4)CD playback and recording starts. Recording is carried out on both side A and B of the tape.

off C-46 C-54 C-60 C-90

RECORDING A COMPACT DISC

Receiver

CD Player

Tape Deck

1

1

4 3 2

5 6

5

1

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

E-34

RECORDING A COMPACT DISC

Note The CD players repeat play mode will be canceled during this recording mode.

To cancel tape-editing function Before recording, press the stop button of the CD player or the tape deck.

To stop recording Press the stop button of the tape deck. (At this time, CD playback automatically stops.)

To make this unit program tracks on a disc automatically so that the least amount of unrecorded space remains on the tape

1 Follow steps 15 on the previous page.

2 Press the PROGRAM button.

3 Press the TAPE button. AP A> illuminates during programming for side A, and AP B> illuminates during programming for side B.

* After AP B> goes out from the display, you can check the programmed contents for side A and B respectively. To check, cancel or correct program data, refer to page 20.

4 Press the EDIT button. (EDIT appears on the display.) The recording is automatically started. * The unit searches for a peak level on each track to

adjust the recording level properly. The search is carried out before recording each track. (While searching, LEVEL flashes on the display, and recording is paused.)

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

CD player

Tape Deck

3

4

2

E-35

E n

g lish

RECORDING A COMPACT DISC

To record programmed tracks

1 Select the CD player so that CD appears on the display by pressing the INPUT selector or button, and load the disc to be recorded., and load a disc on the disc table.

2 Follow steps 25 on page 33.

3 Press the PROGRAM button. * PROG and P-01 illuminate on the display, and all

track numbers on the disc begin flashing.

4 Use the track number input buttons to select the desired track number.

5 Repeat step 4 to set more programs for the side A of the tape. You can select the same track again. * Pressing the TIME button displays the total remaining

time on the side of the tape for about 1 second, and then it is replaced by the display of the next playback order.

* If ERR appears on the display, the track number just selected cannot be programmed because there is not enough time remaining on the side A of the tape. However, at this time, if any other track number is flashing continuously on the display, you can program it instead of the unprogrammable one.

6 After you finish the programming for the side A, press the TAPE button. * Pu appears on the display, then you can begin

programming for side B.

7 Repeat step 4 to set more programs for the side B of the tape. You can select the same track again. * If ERR appears on the display, the track number just

selected cannot be programmed because there is not enough time remaining on the side B of the tape. However, at this time, if any other track number is flashing continuously on the display, you can program it instead of the unprogrammable one.

8 Press the EDIT button. (EDIT appears on the display.) The recording is automatically started. * The unit searches for a peak level on each track to

adjust the recording level properly. The search is carried out before recording each track. (While searching, LEVEL flashes on the display, and recording is paused.)

Notes on tape-editing

To check, cancel or correct program data, refer to page 20.

The maximum number of tracks that can be programmed is 20.

This function can be used to program up to track number 20. If the disc has more than 20 tracks, track number 20 and thereafter will not be programmed.

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Receiver

1 CD Player

1

4

13 6

8

A

TRACK PROG

2 3 4 5 6 7 8 9 10 11 12

HALL

1

DSPON

Display information during programming

Side of the tape

Next playback order

A

TRACK REMAIN PROG

2 3 4 5 6 7 8 9 10 11 12

HALL

1

DSPON

Selected track number Total remaining time on the side of the tape

Programmed track numbers illuminate and unprogrammed ones flash.

E-36

Recording from the built-in tuner 1 Select the tuner so that TUNER appears on the display

by pressing the INPUT selector or button.

2 Tune to the desired station. (Refer to the TUNING OPERATION on pages 23 and 24.)

3 Load a tape into the cassette compartment.

4 When recording with the Dolby NR system, set the Dolby NR switch to B or C; if not, set it to OFF. * For selection of the Dolby B or C position, refer to the

Dolby B and C Type Noise Reduction on page 29.

5 Set the reverse mode switch to to record on only one side, or to (or ) for continuous recording on both sides.

6 Press the REC/PAUSE button. * The corresponding indicator lights up and the play

direction indicators flash.

7 Press the play button to record on side A, or the play button to record on side B.

* For continuous recording on both sides, begin on side A. Recording stops automatically at the end of side B.

To stop recording temporarily

1 Press the REC/PAUSE button.

2 To resume recording, press the play button whose indicator is flashing.

To stop recording Press the stop button.

OTHER RECORDINGS

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Receiver

1

5 7, 2 6, 1 7, 2

Tape Deck

4 3

1

7, 2 7, 2

6, 1

Dubbing During dubbing, adjusting the VOLUME, BALANCE,

TREBLE and BASS controls have no effect on the recorded sound. If, however, the DSP is on, the DSP effect is recorded along with the source. * Music with DSP effect is suitable for listening to inside

a car etc. Try to use the same tape formula and length for the

recording tape as for the master tape.

1 Select the tape deck so that TAPE appears on the display by pressing the INPUT selector or button.

2 Load a prerecorded tape into the DECK A cassette compartment. Insert a blank tape into the DECK B cassette compartment.

3 Set the reverse mode switch to to record on only one side, or to (or ) for continuous recording on both sides.

4 Press the DUBBING button. * Press NORMAL to dub at normal speed, and HIGH

to dub at about twice the normal speed. * Dubbing will begin from side A regardless of the side

now selected.

To stop dubbing Press the stop button. * Tape A and tape B will stop at the same time.

Note Only tapes originally encoded with Dolby B or C NR will be dubbed onto tapes with Dolby B or C NR encoding. The Dolby NR switch will have no effect on the recording of tape B during dubbing. However, the playback tonal quality of tape A will change according to the Dolby NR switch position.

Erasing recorded tapes 1 Load the tape to be erased into the DECK B cassette

compartment.

2 Select the tape deck so that TAPE appears on the display by pressing the INPUT selector or button.

3 Set the reverse mode switch to to erase only one side and to (or ) to erase both sides.

4 Press the REC/PAUSE button, then press the play button to erase side A of the tape, or the play button to erase side B.

E-37

E n

g lish

OTHER RECORDINGS

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

1, 2

Receiver

Tape Deck

4 3, 3 4 4

4

1, 2

4

4

2 4 2, 1

E-38

HOW TO USE THE BUILT-IN TIMER

Timer play By using the built-in timer, you can set the time when the unit turns on and a source begins playing automatically, and the time when the unit turns off automatically.

1 Prepare the source to be played.

For tuner: Tune in to the station you will listen to.

For tape deck: Load a tape into the cassette compartment. (If tapes are loaded in both the compartments, tape A takes priority of tape B, and is played back by the timer play.)

For CD player: Load a disc on the disc table.

2 Press the DISPLAY button. Whenever the DISPLAY button is pressed, the display mode changes as follows. At each mode, make a setting for the timer play, referring to the setting procedure described below.

Current time (TIMER on/off mode)

Source selecting mode (TAPE, TUNER, CD)

ON TIME/Time setting mode

OFF TIME/Time setting mode

Normal display mode

* The display mode will be changed to the next mode after about 8 seconds elapse automatically. If the mode is changed before the setting is completed, call the mode again by pressing the DISPLAY button once or more.

Setting procedure:

At the display of current time Check to be sure that the current time is correct, and press the TIMER button so that TIMER appears on the display.

At source selecting mode Select the source (TAPE, TUNER or CD) to be played by pressing the INPUT selector or button. * If TUNER is selected, soon it is changed to the

frequency display mode. In this mode, you can select the station to listen to with the timer play by using the BAND button, A/B/C/D/E button and TUNER PRESET DOWN/UP buttons.

2 2- 2-

Receiver

E-39

E n

g lish At ON TIME/time setting mode

[ON TIME appears on the display, and soon it is changed to a time setting mode.] Set to the time when the timer play begins by using the HOUR button and the MINUTE button.

At OFF TIME/time setting mode [OFF TIME appears on the display, and soon it is changed to a time setting mode.] If necessary, set to the time when you want to finish the timer play (to turn this unit off) by using the HOUR button and the MINUTE button. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour.

* The TIMER button functions also in the time (ON TIME or OFF TIME) setting mode.

3 If you will not use this unit until the timer play begins, turn the power off by pressing the POWER switch or the TIMER button.

Note If a timer play setting is made and the power is not turned off, the source set for the timer play will begin playing when the time comes in place of the source played at that time.

To cancel the timer play setting After the timer play is finished, press the DISPLAY button to call the current time. While the current time is displayed, press the TIMER button so that TIMER goes out from the display. If it is not canceled, the system will be turned on at the same time every day, so it can be used as an alarm. However, if you will be out at that time, cancel the timer play setting. * Unless the AC supply lead is unplugged or there is a

power failure for more than 30 minutes, the time set on the timer will be retained until it is reset.

How to make time setting in the ON TIME or OFF TIME mode

For the hour: Press the HOUR button to change the hour to a higher value. Press and hold to change continuously. To change the hour to a lower value, while pressing the TIME ADJUST button, press the HOUR button.

For the minute: Use the MINUTE button and operate it in the same way as you did to change the hour.

HOW TO USE THE BUILT-IN TIMER

POWER TIME ADJ

Receiver

DISPLAY TIMER 2-,

E-40

To begin CD playback from a desired track by the timer play.

1. Play back the track which you want to play back from the beginning of the timer play.

2. Press the RESUME button on the CD player so that appears on the display.

3. Make the timer play setting. 4. Turn the power off while the track is being played back.

when the time comes, the timer play begins from the beginning of the track.

* If you will not play back a CD from a designated track by the timer play, press the RESUME button so that disappears from the display.

Timer recording (To record a tuner program) 1 Load a blank tape into the DECK B cassette

compartment.

2 Tune to the station of which program you want to record.

3 Follow step 2 of the Timer play on pages 38 and 39.

* In step 2-, select TUNER by pressing the INPUT selector or button, and then press the TIMER REC button so that REC and the station frequency flashes alternately.

4 If desired, change the setting of the reverse mode switch and the Dolby NR switch.

5 If you will not use this unit untill the timer recording begins, turn the power off by pressing the POWER switch or the TIMER button.

To confirm the timer time setting Press the DISPLAY button.

To cancel the setting of timer recording Press the DISPLAY button once or more so that REC flashes on the display. While REC is flashing, press the TIMER REC button. * Unless the AC supply lead is unplugged or there is a

power failure for more than 30 minutes, the time set on the timer will be retained until it is reset.

Note When the timer recording is finished, the timer setting is automatically canceled to avoid repeating timer recording of the same setting.

HOW TO USE THE BUILT-IN TIMER

Receiver

CD Player

DISPLAY TIMER

POWER

Tape Deck

4 4 1

TIMER REC

INPUT

RESUME

E-41

E n

g lish

HOW TO USE THE BUILT-IN TIMER

Sleep timer operation This unit can be turned off automatically.

1 Play the desired sound source.

2 Press the SLEEP button. SLEEP appears on the display, and soon it is replaced by 120.

3 Press the SLEEP button repeatedly until the desired sleep time appears in the display. The display will change as described below. (Time is displayed by the minute.)

* The original display mode will resume about 4 seconds after the selection is made.

* The SLEEP indicator illuminates to indicate that the sleep timer is on.

4 The unit will turn off automatically when the preset sleep time has passed.

To confirm the sleep time setting Press the SLEEP button once. SLEEP appears on the display, and soon it is replaced by the remaining time of the preset sleep time.

To change the sleep time While the SLEEP indicator illuminates, press the SLEEP button repeatedly until the desired time appears.

To stop the sleep timer operation Press the POWER switch, or press the SLEEP button repeatedly until OFF SLEEP appears on the display. (The SLEEP indicator will go out.)

To set the sleep time using front panel buttons First press the DISPLAY button to display the current time. Within 7 seconds, press the AUTO MEMORY button. Whenever the AUTO MEMORY button is pressed, the sleep time changes.

Using the timer and the sleep timer at the same time 1 Prepare timer playback. (See pages 38 and 39.)

* Do not turn the power of this unit off after the timer setting is finished.

2 Press the SLEEP button and set the sleep time.

When the sleep timer operation finishes, the timer will function to turn the source on at the preset time.

Notes Do not set the timer time so that the timer will start during

sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.)

If the power is turned off by the sleep timer while playing back a CD with is illuminated on the display, when CD playback begins at the time set on the timer play setting, playback begins from the beginning of the track which had been being played back when the power was turned off by the sleep timer. * The indicator is switched on and off by pressing

the RESUME button on the CD player.

OFF SLEEP (Sleep timer is off.)

120 90 60 30

- +

1 2 3 4 5

1 2 3 4 5

6 7 8

6 7 8 9 0

A B C D E

TIME PROG TAPE EDIT +I0

STOP PLAY/PAUSE

RANDOM

REPEAT

CD

TUNER

TAPE

PRESET

DOWN UP

PLAY STOP

REC/PAUSE

SLEEPPOWER DISPLAY VOLUME

DECK PHONO/AUX

TUNER DIRECT

A/B

A/B/C/D/E

PLAY

EFFECT LEVEL DSP MODE SP/PHONES

- +

Receiver

POWER

DISPLAY AUTO MEMO

POWER

SLEEP

E-42

INPUT

PHONO

AUX

R L

Auxiliary (AUX) 1 Connect the output lead of a video cassette player, video

disc player, etc. to the AUX inputs of this unit. (red right channel, white left channel)

2 Press the INPUT selector or button once or more until AUX appears on the display.

3 Operate the unit connected to the AUX inputs.

4 Start recording with this unit, if so desired. (See page 36.)

Turntable (PHONO) 1 Connect the output lead of a turntable.

(red right channel, white left channel)

2 Connect the GND lead of a turntable.

3 Press the INPUT selector or button once or more until PHONO appears on the display.

4 Operate the turntable.

5 Start recording with this unit, if so desired. (See page 36.)

USING EXTERNAL UNITS

INPUT

PHONO

AUX

R L

GND

E-43

E n

g lish

PHONES

Headphones Be sure that your headphones have a 3.5 mm (1/8)

diameter plug and are between 16 ohms and 50 ohms impedance. Recommended impedance is 32 ohms.

When headphones are connected, the speakers are defeated automatically. Adjust the VOLUME control for desired volume.

Internal care Dirty heads, capstans and pinch rollers can cause poor

sound and tape jams. Clean these parts with a cotton swab moistened with commercially available head/pinch roller cleaner or isopropyl alcohol, or with a commercially available cleaning tape.

After long use, the decks heads and capstans may become magnetized, causing poor sound. Demagnetize these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetizer. Read the demagnetizers instructions carefully before use.

External care Periodically clean the surfaces of this system, especially

the top panel of the receiver to prevent the ventilation holes from being blocked with dust etc.

Do not use chemically treated cleaning cloths or other chemicals. (See Precautions.)

USING EXTERNAL UNITS

MAINTENANCE

DECK B

DECK A

E-44

SPECIFICATIONS

As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

Receiver (RX-S50)

Minimum RMS Output Power per Channel 6 ohms, 50 Hz to 20 kHz, 0.08% THD .......................... 35W+35W 6 ohms, 1 kHz, 10% THD

[U.K. and General models only] ............................... 50W+50W DIN Standard Output Power per Channel [Europe model only]

6 ohms, 1 kHz, 1% THD .......................................................... 40W IEC Power [Europe model only]

6 ohms, 1 kHz, 0.1% THD ....................................................... 35W Input Sensitivity/Impedance

PHONO MM ....................................................... 2.5 mV/47 k-ohms AUX .................................................................. 300 mV/20 k-ohms

Headphone Output Impedance.......................................... 68 ohms Total Harmonic Distortion (20 Hz to 20 kHz)

AUX to SP OUT (17.5W/6 ohms) ......................................... 0.08% Tone Control Characteristics

BASS: Boost/cut ................................................... 10 dB (50 Hz) TREBLE: Boost/cut ............................................. 10 dB (20 kHz)

Tuning Range FM

[Australia, Europe, U.K. and General models] ...................................................................... 87.5 to 108.0 MHz

AM (MW) [General model] ........................................... 530 1,710 kHz [Australia, U.K. and Europe models] ......... 531 1,611 kHz

LW [U.K. and Europe models only] ..................... 153 288 kHz

Usable Sensitivity FM (75 ohms)

(30 dB S/N Quieting, 1 kHz, 100% mod.) [Except Europe model]................................1.2 V (12.8 dBf)

(DIN, Mono, S/N 26 dB) [Europe model] ........................1.5 V AM (MW)........................................................................ 280 V/m LW ................................................................................. 560 V/m

Power Supply [Australia and U.K. models] ............................. AC 240V, 50 Hz [Europe model] ................................................. AC 230V, 50 Hz [General model] ...................... AC 110/120/220/240V, 50/60 Hz

Power consumption [Australia, Europe, U.K. and General models] ............... 120W

Dimensions (W x H x D)............................. 280 x 107.5 x 339.5 mm (11 x 6-7/8 x 13-3/8)

Weight ............................................................ 5.3 kg (11 lbs. 11 oz.)

CD player (CDX-S50)

Power Source ................................... AC supplies from receiver unit Type ................................................................. Compact Disc Player Signal Readout ........................... Non-contact, 3-beam semi-conductor laser pick-up D/A Converter ................................................................... 1-bit DAC Filter ......................................8-time oversampling 18-bit digital filter Wow and Flutter .........................................Below measurable limits Dimensions (W x H x D)............................. 280 x 107.5 x 322.5 mm

(11 x 6-7/8 x 12-11/16) Weight .............................................................. 3.0 kg (6 lbs. 10 oz.)

Tape Deck (KXW-S70)

Power Source ................................... AC supplies from receiver unit Type ............... Auto Reverse 4-Track 2-Channel playback/recording

and playback stereo double Cassette Deck Heads ................................................ PB, REC/PB : Hard Permalloy

Erase : Double Gap Ferrite Motors ................................................................ DC servo motor x 2 Wow and Flutter ................................................. 50.19%, W.PEAK

0.09%, W.RMS Fast Winding Time (C-60 Tape) ........................ About 120 seconds Frequency Response (20 dB) ........................................................ 30 15,000 Hz 53 dB (Normal)

30 16,000 Hz 53 dB (CrO2) 30 18,000 Hz 53 dB (Metal)

Signal-to-Noise Ratio .................................. 58 dB (Dolby NR OFF) 66 dB (Dolby B NR ON) 74 dB (Dolby C NR ON)

Harmonic Distortion .......................................... No more than 1.2% Channel Separation (Input Shorted 1 kHz) ................................................................................. More than 40 dB Crosstalk (Input Shorted 125 Hz).......................... More than 55 dB Dimensions (W x H x D)................................ 280 x 117.5 x 326 mm

(11 x 4-5/8 x 12-13/16) Weight ................................................................ 4.2 kg (9 lbs. 4 oz.)

Speaker (NX-S50)

Type .................................................... Active Servo Processing type Speakers ........................................................ 13 cm (5-1/8) woofer

5 cm (2) tweeter Frequency Range .................................................... 50 20,000 Hz Sound Pressure Level.......................................................... 88.5 dB Maximum Power Handling Capacity........................................ 50W Impedance ............................................................................ 6 ohms Dimensions (W x H x D)................................ 170 x 332.5 x 222 mm

(6-11/16 x 13-1/16 x 8-3/4) Weight .......................................................... 3.3 kg (7 lbs. 4 oz.) x 2

E-45

E n

g lish

CAUSE

AC supply lead is not plugged in.

Loose speaker connections.

Internal protection circuit is functioning.

Interference from starting motor of nearby car.

Interference from thermostat of nearby electrical appliance.

Antenna input is too weak due to obstructions or excessive distance from broadcasting station.

Insufficient antenna input.

Preset memory has been erased.

Interference from source such as lightning, flourescent lights, electric motors or thermostat of nearby electrical appliance.

TV or microprocessor is being used nearby.

Radio signal is weak or antenna is not properly connected.

Current time is not set.

The internal microcomputer has been frozen by an external electric shock (lightning, excessive static electricity, etc.) or power supply with low voltage.

Disc is upside down.

Disc is dirty.

Input selector setting is incorrect.

Disc is dirty.

Volume set too high.

Slack tape wrapped around pinch roller.

Erasure prevention tab is broken off.

Head is dirty.

Head is dirty.

Head has become magnetized.

Tape is worn.

Dolby NR switch is set to wrong position.

Head is dirty.

Head is dirty.

Head has become magnetized.

Tape is worn.

Slack tape coming out of cassette shell.

Tape is creased or torn.

Endless tape is being used.

Silent gaps between selections are too short.

Excessively soft passages in middle of selections.

Conversation etc. is recorded.

Batteries are dead.

Remote control is too far away or is being used at incorrect angle.

Direct sunlight or lighting (of an inverter type of flourescent lamp etc.) is striking the remote control sensor of the main unit.

Remote control is being used near TV set with a remote control sensor.

SYMPTOM

No power even if the POWER switch is pressed.

No sound from one speaker

No sound from speakers.

Excessive static in FM broadcasts.

Noise increases during stereo broadcasts.

Stereo broadcasts are noisy and STEREO indicator blinks on and off.

Cannot select preset stations.

Buzzing or static during AM (LW or MW) broadcasts.

AM (LW or MW) broadcast sensitivity is poor.

Cant set timer.

This unit will not operate properly.

Play does not begin even if disc is loaded.

No sound.

Sound stops suddenly (always at same spot).

Tape wont move during playback or recording.

Cant record.

Sound is distorted or fades out.

Poor sound quality.

Stereo balance is poor.

Excessive noise.

Tape travel stops in middle of playback or recording.

Cant find the beginning of desired selections on tape.

Remote control doesnt work.

TV functions strangely when the remote control is used.

TROUBLESHOOTING

If your unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. Should be service required, the servicer will need all three pieces (RX-S50, CDX-S50, KXW-S70).

REMEDY

Plug in the AC supply lead.

Connect properly.

Unplug the AC supply lead from the wall AC outlet, and then plug in again.

Position the FM antenna as high and as far away from nearby roads as possible. Connect using a coaxial cable.

Check antenna connections.

Install a multi-element type FM antenna if possible.

Install an antenna appropriate for the electric field strength of your area.

Reprogram memory presets.

Problem is difficult to eliminate but can be lessened by grounding MW/LW (AM) loop antenna.

Move away from TV or microprocessor.

Properly connect MW/LW (AM) loop antenna.

Change orientation of MW/LW (AM) loop antenna.

Install an external MW/LW (AM) antenna.

Set current time.

Unplug the AC supply lead from the wall AC outlet, and then plug in again after about one minute.

Load disc label side up.

Clean disc.

Select CD by the INPUT selector buttons.

Clean disc.

Lower volume.

Take up slack with a pencil before using.

Replace tape or cover erasure prevention hole with cellophane tape.

Clean heads.

Clean heads.

Demagnetize heads with head eraser.

Replace tape.

Set to positions matching those used when tape was recorded.

Clean heads.

Clean heads.

Demagnetize heads with head eraser.

Replace tape.

Take up slack by turning reels with a pencil.

Replace with new tape.

Dont use endless tapes.

The function for searching the beginning of desired selections wont operate unless the silent gaps between selections are at least four seconds long.

Replace batteries.

Use within 6 m and 60 radius.

Change position of the main unit.

Move TV farther away or cover its remote control sensor.

R E

C E

IV E

R C

D P

L A

Y E

R R

E M

O T

E C

O N

T R

O L

T A

P E

D E

C K

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMA

Manualsnet FAQs

If you want to find out how the CC-50 Yamaha works, you can view and download the Yamaha CC-50 Mini Component System Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha CC-50 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha CC-50. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha CC-50 Mini Component System Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha CC-50 Mini Component System Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha CC-50 Mini Component System Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha CC-50 Mini Component System Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha CC-50 Mini Component System Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.