Yamaha Firmware Firmware Update Guide PDF

Download download
Yamaha Firmware Firmware Update Guide PDF
Yamaha Manual Yamaha Firmware Manual Yamaha Firmware Manual Yamaha Firmware Update Guide
Pages 6
Year 0
Language(s)
English en
1 of 6
1 of 6

Summary of Content for Yamaha Firmware Firmware Update Guide PDF

Page 1

1

Choose from the following 2 methods to update to the latest firmware.

Click here for Firmware Update Through the Internet (Connection to the Internet is required)

Click here for Firmware Update by USB

(A USB thumb drive is required)

In case of error, see the Troubleshooting section

IMPORTANT NOTICE Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty.

FIRMWARE UPDATING PROCEDURE

Page 2

2

UPDATE SUCCESS POWER OFF! PLEASE...

MAIN ZONE key

Firmware Update Through the Internet

Requirement: Internet connection

Your receiver is connected to the Internet if you can receive Internet radio stations. (See owners manual for details)

1 Power off the receiver (Standby mode)

2 Enter the ADVANCED SETUP mode

3 Select FIRM UPDATE from the menu

4 Start firmware update

While pressing the STRAIGHT key, press the MAIN ZONE key and keep STRAIGHT key pressed until

ADVANCED SETUP appears on the front panel display.

* ADVANCED SETUP is displayed only for a few seconds.

a. Press the PROGRAM key until FIRM UPDATE USB is displayed.

b. Then, press STRAIGHT key until NETWORK is displayed.

a. Press INFO (WPS) key to start the update.

(Update process may take up to 15 minutes)

* If UPDATE SUCCESS appears, this means your receiver is already up-to-date. In this case, power off to

exit from Advanced Setup. Your AV receiver is ready for normal use. Firmware update in progress

Caution DO NOT interrupt power during the update.

In case the power is accidentally cut off resulting in a condition where you cant recover normal operation, refer to the troubleshooting method (Troubleshooting CASE 2) on the last page.

b. When completed, UPDATE SUCCESS , PLEASE... and POWER OFF! appears on the display.

c. Turn off the power of the receiver by pressing the MAIN ZONE key.

INFO (WPS) keySTRAIGHT key

PROGRAM key

Page 3

3

5 Select FIRM UPDATE from the menu

a. Power on the AV receiver and press the ON SCREEN key on the remote control.

b. Select Information > System.

c. Confirm that the firmware version is updated to the latest version.

ON SCREEN key

Congratulations! You have completed the firmware update. Your AV receiver is ready for normal use.

Page 4

4

Firmware Update by USB

Requirement: USB thumb drive, with enough free space to store over 25MB. (File system with FAT16 or FAT32 format)

Firmware file provided by YAMAHA, R03xx-xxxx.bin.

1 Prepare USB thumb drive for the update

Download the firmware, unzip and copy R03xx-xxxx.bin into the root directory of the USB thumb drive.

Drag & Drop the file into USB thumb drive.

2 Power off the receiver (Standby mode)

3 Insert the USB thumb drive

USB port is located at the lower left corner of the front panel.

4 Enter the ADVANCED SETUP mode

While pressing the STRAIGHT key, press the MAIN ZONE key and keep STRAIGHT key pressed until ADVANCED SETUP appears on the front panel display.

5 Select firmware update from the menu

Press the PROGRAM key until FIRM UPDATE USB is displayed.

USB port

STRAIGHT key

PROGRAM key

MAIN ZONE key

R03xx-xxxx.bin

Page 5

5

UPDATE SUCCESS POWER OFF! PLEASE...

6 Start firmware update

a. Press INFO (WPS) key to start the update.

(Update process may take up to 10 minutes)

* If UPDATE SUCCESS appears, this means your receiver is already up-to-date. In this case, power off to

exit from Advanced Setup. Your AV receiver is ready for normal use. Firmware update in progress

Caution DO NOT interrupt power during the update.

In case the power is accidentally cut off resulting in a condition where you cant recover normal operation, refer to the troubleshooting method (Troubleshooting CASE 2) on the last page.

b. When completed, UPDATE SUCCESS , PLEASE... and POWER OFF! appears on the display.

c. Turn off the power of the receiver by pressing the MAIN ZONE key.

7 Select FIRM UPDATE from the menu

a. Power on the AV receiver and press the ON SCREEN key on the remote control.

b. Select Information > System.

c. Confirm that the firmware version is updated to the latest version.

ON SCREEN key

Congratulations! You have completed the firmware update. Your AV receiver is ready for normal use.

USB port

MAIN ZONE key

INFO (WPS) key

Page 6

6

UPDATE SUCCESS POWER OFF! PLEASE...USB FIRM UPDATE

CASE 1 Error message appeared during the update

Cause: For some reason, the receiver cant read the firmware data.

Method: For your solution, check the following

[Update through Internet]

Check Internet connection.

Your Internet connection is working by playing an Internet radio station. (See owners manual for details)

[Update by USB thumb drive]

USB thumb drive is connected properly to the receiver.

USB thumb drive is not password protected.

(AV receiver cannot read data from a security protected USB thumb drive)

Make sure the USB thumb drive is inserted before the receiver is powered on for the

update.

The firmware data, R03xx-xxxx.bin is stored in the root directory of the USB thumb drive.

There is no other data except the firmware data in the USB thumb drive.

No folders are created in the USB thumb drive.

Else, retry the update by USB using another USB thumb drive. CASE 2 Firmware update doesnt start for other reasons

Receiver doesnt power up after the update.

Or, error message appeared when confirming the firmware version.

Recovery method using USB method: 1. Unplug the AC power cable from wall outlet.

2. Insert the USB thumb drive which has the firmware data stored inside, into the USB port located on the front panel.

3. Press and hold the PURE DIRECT key and keep it pressed while you plug the AC power cable back into the wall outlet again. FIRM UPDATE USB will appear on the front display. Then, release the PURE

DIRECT key.

4. The update will start automatically.

5. When UPDATE SUCCESS , PLEASE... , POWER OFF! appears on the

display, firmware update is co

Manualsnet FAQs

If you want to find out how the Firmware Yamaha works, you can view and download the Yamaha Firmware Firmware Update Guide on the Manualsnet website.

Yes, we have the Update Guide for Yamaha Firmware as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Update Guide should include all the details that are needed to use a Yamaha Firmware. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha Firmware Firmware Update Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha Firmware Firmware Update Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha Firmware Firmware Update Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha Firmware Firmware Update Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha Firmware Firmware Update Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.