Contents

Yamaha ATS-4080 Firmware Update Guide PDF

1 of 6
1 of 6

Summary of Content for Yamaha ATS-4080 Firmware Update Guide PDF

1

This Guide provides instructions for updating firmware with a USB flash drive on the following products.

YAS-408

ATS-4080*

YMS-4080* * Sold only in certain countries or regions

See product pages on the Yamaha website for details regarding the issues resolved, and functions added, by updating firmware.

Equipment required for firmware update

Prepare the following items before attempting to update firmware.

USB flash drive Use a USB flash drive that meets all of the following requirements. Supports the USB mass storage device class Formatted in FAT16 or FAT32 format No encryption applied No data stored on the device (empty)

Computer that can be connected to the Internet Download the firmware from the Yamaha website.

Update Guide

Manual Development Group 2018 Yamaha Corporation

Published 08/2018 NVOD-A0

AV17-0326

EN

2

Preparing the firmware

1 Download the latest version of firmware from the Yamaha website to a computer. See product pages on the Yamaha website for more information.

2 Decompress the downloaded file and save the firmware data file to the USB flash drive. Be sure to save the firmware data file in the top folder (root folder) of the USB flash drive.

Do not change the file name when saving it. File names are as follows:

YAS-408: 000450-xxxx.bin ATS-4080: 000652-xxxx.bin

YMS-4080: 000451-xxxx.bin

xxxx is a set of pre-determined alphanumeric characters.

3

Updating the units firmware

1 Turn off the unit.

2 Unplug the power cable from the AC wall outlet.

3 Connect the USB flash drive to the UPDATE ONLY jack on the unit.

YAS-408 ATS-4080 YMS-4080

4 Plug the power cable into an AC wall outlet.

5 Touch and hold and together for at least 3 seconds.

The firmware update begins. The indicators will glow as shown below while the firmware is being updated.

The indicators will flash as shown below when the firmware update has been successfully completed.

If indicators flash differently than shown above, or fail to glow or flash at all, see Troubleshooting (p. 5 and 6).

USB flash drive containing the firmware data file

Running display (glow in succession) Glows

Flash

4

6 Touch when the firmware update is complete. The unit will turn off.

7 Disconnect the USB flash drive.

The firmware update has been completed.

NOTICE Do not unplug the power cable or disconnect the USB flash drive until the following procedures are completed.

5

Troubleshooting

If the firmware update fails, the indicators will flash as illustrated below. Confirm the problem and try updating the firmware again.

Flashing (red) indicator

Cause Remedy

The USB flash drive is not connected to the unit correctly.

1. Terminate the update by touching z. 2. Connect the USB flash drive to the

unit correctly. 3. Try updating the firmware again.

Flashes (red)

Cause Remedy

The firmware data file was not properly saved to the USB flash drive.

1. Terminate the update by touching z. 2. Disconnect the USB flash drive and

be sure that the firmware data file has been saved as follows. The file name has not been

changed. The file is stored in the top folder

(root folder). 3. Connect the USB flash drive and try

updating the firmware again.

6

Indicators off

Cause Remedy

The USB flash drive was disconnected from the unit while firmware was being updated.

1. Terminate the update by touching z. 2. Connect the USB flash drive to the

unit correctly. 3. Try updating the firmware again.

The USB flash drive is damaged.

1. Terminate the update by touching z. 2. Save the firmware data file to another

USB flash drive and try updating the firmware again.

There is a problem with the firmware data file.

1. Terminate the update by touching z. 2. Download the firmware data file for

your unit from the Yamaha website and save it to the USB flash drive.

3. Try updating the firmware again.

Cause Remedy

The power cable was unplugged while firmware was being updated.

1. Plug the power cable into an AC wall outlet.

2. Be sure that the USB flash drive

Manualsnet FAQs

If you want to find out how the ATS-4080 Yamaha works, you can view and download the Yamaha ATS-4080 Firmware Update Guide on the Manualsnet website.

Yes, we have the Update Guide for Yamaha ATS-4080 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Update Guide should include all the details that are needed to use a Yamaha ATS-4080. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha ATS-4080 Firmware Update Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha ATS-4080 Firmware Update Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha ATS-4080 Firmware Update Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha ATS-4080 Firmware Update Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha ATS-4080 Firmware Update Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.