Yamaha BD-S2900 Version 1.2 Firmware Firmware Update PDF

1 of 4
1 of 4

Summary of Content for Yamaha BD-S2900 Version 1.2 Firmware Firmware Update PDF

YAMAHA ELECTRONICS CORPORATION, USA 6660 Orangethorpe Avenue, Buena Park CA 90620-1345

M Su Ya yo (P NO a De well as O ink be Cl If co an

arch, 2009

bject: BD-S2900 Firmware Update ver. 1.2 maha is pleased to offer a new firmware update to ensure the best possible performance for ur Yamaha BD-S2900 Blu-ray Disc Player. This firmware update will improve the PiP icture in Picture) video playback.

TE: This firmware update is only applicable to USA models purchased from authorized Yamah alers. Attempting this firmware update on NON-USA models may cause damage to the unit as void the Yamaha Warranty.

wner's of the Yamaha BD-S2900 can perform the firmware update themselves. Included in the l low you will find a zip file with the firmware update and instructions.

ick here for firmware update.

you are not able to perform the update, or if you experience issues during the update, please ntact Yamaha Customer Support at (800) 292-2982, Monday through Friday 8 a.m. - 12 p.m. d 1 p.m. - 4 p.m. PT for assistance.

< IMPORTANT NOTICE > Do not attempt to update your Yamaha Blu-ray Player using any other data file except those provided directly from the Yamaha website. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty.

Page 2 of 4 Yamaha BD-S2900 Firmware Update

Date: March, 2009 Subject: YAMAHA Blu-ray Player BD-S2900 Firmware Update 1. Firmware History Version 1.2 Improves PiP (Picture in Picture) video playback Version 1.1 Improves Blu-ray disc playback with 24p frame rate setting 2. Check your current version STEP1. Connect power cable to AC outlet. STEP2. Turn on the unit by pressing the [STANDBY/ON] button.

STEP3. When No DISC appears on the front display, open the SETUP menu by pressing the [SETUP] button on the remote controller. STEP4. Move cursor down to highlight DISPLAY and press [OK] on the remote controller.

STEP5. By pressing the [STATUS] button on the remote controller, the units current version will appear for 5 seconds.

3. Prepare update disc

Download (BDS_firmware_V12.zip) from YAMAHA website. Unzip this zip file and burn BD___UPD.FRM onto a CD-R/RW disc. NOTE: Burn as DATA disc with ISO9660 format and make sure BD___UPD.FRM is the only data on the disc.

OK

Version 1.0 or 1.1 If firmware version is 1.0 or 1.1, proceed to the next step to update your BD-S2900. If firmware version is 1.2, your BD-S2900 is already up to date. No need to update.

Page 3 of 4 Yamaha BD-S2900 Firmware Update

4. PRECAUTIONS before you start the update FOLLOW INSTRUCTIONS CAREFULLY.

Firmware update may take approximately 5 minutes. Do NOT press any buttons on the front panel or the remote controller while update

is in progress. Firmware may not be installed properly. Do NOT power off or unplug the AC power cable while update is in progress.

Worst case the BD-S2900 may not recover.

5. Installing firmware to BD-S2900 STEP1. Connect power cable to the AC outlet. STEP2. Turn on the unit by pressing the [STANDBY/ON] button. STEP3. Open the disc tray by pressing the [OPEN/CLOSE] button.

STEP4. Set the update disc on the disc tray and close the disc tray by pressing the [OPEN/CLOSE] button.

Note When NoUPDATE scrolls across and STOP appears on the front display, the firmware version in your BD-S2900 is the same as or higher than the version in the update disc. In this case, update is unnecessary. Remove update disc from the disc tray.

STANDBY/ON OPEN/CLOSE

Page 4 of 4 Yamaha BD-S2900 Firmware Update

STEP5. Firmware update will start automatically. Front display will change sequentially .

BYE L FVU L MAIN W MAIN FINISH

STEP6. When FINISH appears on front display, the tray will open automatically. Keep

the disc tray open and remove the update disc. STEP7. Press [STANDBY/ON]. Disc tray will close automatically and turn itself off.

6. Check updated version

STEP1. Turn on the unit by pressing the [STANDBY/ON] button. STEP2. When No DISC appears on the front display, open the SETUP menu by pressing the [SETUP] button on the remote controller. STEP3. Move cursor down to highlight DISPLAY and press [OK] on the remote controller. STEP4. By pressing the [STATUS] button on the remote controller, the units current version will appear for 5 seconds. Please verify the unit was successfully updated by visually verifying the version number.

STEP5. Press the STEP5. [SETUP] button on remote controller to exit from setup menu.

Version 1.2

0% 100%

Manualsnet FAQs

If you want to find out how the BD-S2900 Yamaha works, you can view and download the Yamaha BD-S2900 Version 1.2 Firmware Firmware Update on the Manualsnet website.

Yes, we have the Firmware Update for Yamaha BD-S2900 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Firmware Update should include all the details that are needed to use a Yamaha BD-S2900. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha BD-S2900 Version 1.2 Firmware Firmware Update is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha BD-S2900 Version 1.2 Firmware Firmware Update consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha BD-S2900 Version 1.2 Firmware Firmware Update free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha BD-S2900 Version 1.2 Firmware Firmware Update, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha BD-S2900 Version 1.2 Firmware Firmware Update as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.