DT2K10SP 1,2 Pads Set Accessories List
The following accessories are included with this set. if any item is missing, please contact the dealer from whom you purchased the set. Please refer to the Owners Manual for each product on the proper use and set-up.
SPECIAL MESSAGE SECTION
NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not
covered by the manufacturers warranty, and are therefore the owners responsibility. Please study this manual carefuly and consult your dealer before
requesting service.
ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our
products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be
aware of the following:
Warning: Do not attempt to disassemble.
Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe
all local, state, and federal regulations that relate to the disposal of products that contain lead, plastics, etc. If your dealer is unable to assist you, please
contact Yamaha directly.
NAME PLATE LOCATIOIN: The name plate is located on the bottom of the product. The model number, serial number, power are located on this plate.
You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent
record of your purchase.
Model : TP100 (1) Serial No. Model : PCY130 Serial No.
Model : TP100 (2) Serial No. Model : PCY130S Serial No.
Model : TP100 (3) Serial No. Model : PCY150S Serial No.
Model : TP100 (4) Serial No. Model : RHH130 Serial No.
Model : TP120SD Serial No. Model : KP65 Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
DT2K10SP 1,2 DT2K10SP 1,2 TP100/120SDPCY130/130S/ 150SRHH130KP65
1.
2. 6
3.
4. 6
(1)
(2)
(3)
(4)
(5)
(6)
(7)
5.
This warranty is valid only in Japan.
6.
TP100 (1)
TP100 (2)
TP100 (3)
TP100 (4)
TP120SD
PCY130
PCY130S
PCY150S
RHH130
KP65
6
Accompanying the DT2K10SP 1 Snare Pad TP120SD X1
Cymbal Pad PCY150S X1 Stopper x1 / Felt x1 (Thin Type) (For PCY150S)
Real Hi-hat Pad RHH130 X1 Clamp Base Assy x1 (For RHH130)
Kick Pad KP65 X1
Body
Base
Snare Stand SS652 X1
Hi-hat Stand HS740 X1
Drum Key X1
Each cable is labeled with a name that corresponds to the Input Jack on the
DTXTREME IIs Drum Trigger Module.
As cable lengths (2.5m/4m) have been determined according to a common setup
like the one shown in the illustration on the right, connect the labeled cables to their
corresponding Input Jacks (Input name = Cable name) when using a similar setup.
If, for example, the Drum Trigger Module or pads are set in a position other than
what is shown in the setting on the right, ignore the cable labels and attach the
cables according to the distance between the pad and the drum trigger module.
* Make sure a parallel type stereo phone cable is used when connect- ing the TP100/120SD to the module. The parallel type stereo phone cable is designed with two lines run- ning in parallel carrying left and right signals on their own indepen- dently shielded lines.
Parallel Type (Individually shielded lines)
Shield
L R
Spiral Tube 2m X1 Cut the tube to a suitable length and use it to bind the cables together when setting up the system.
Stereo Phone Cables (Parallel Type) 2.5m X7
Stereo cables have connectors with two black lines.
1 SNARE 2 TOM1 3 TOM2
HH CON 8 HI-HAT 9 KICK
7 CRASH1
4m X4
4 TOM3 5 TOM4 6 RIDE 11 CRASH2
CRASH1 PCY130S
RIDE PCY150S
CRASH2 PCY130
HI-HAT RHH130 SNARE
TP120SD TOM4 TP100
TOM3 TP100
TOM2 TP100
TOM1 TP100
KICK KP65
DTXTREME IIs
DT2K10SP 1,2 Pads Set Accessories List (this sheet) X1
Owners Manuals 1each (TP100/120SD,PCY130/130S/ 150S,RHH130,KP65)
Accompanying the DT2K10SP 2
Tom Pads TP100 X4 Clamp bolts x4 (For TP100)
Cymbal Pads PCY130 X1 PCY130S X1 Stopper x2 / Felt x2 (Thin Type) (For PCY130/130S)
en
ja
de
fr
sp
zh