Yamaha DTX500 Drum Kit Setup Guide PDF

1 of 2
1 of 2

Summary of Content for Yamaha DTX500 Drum Kit Setup Guide PDF

DTX500 Module Setup Guide

1. Press the power switch while holding down the [SHIFT] button.

2. Check the number on the display that indicated in the picture below.

3. Set the trigger setup with the parameters listed below. The parameters should be different

for each number which youve checked at procedure 2 above.

XP70

Number = 1.00 Number = 1.10 Number = 1.20

TRG2=Type For Snare : SN-1

For Tom : TM-1

For Snare : SN-4

For Tom : TM-4

For Snare : SN-7

For Tom : TM-7

TRG3=Gain,MVl Gain*1 Gain*1 Gain*1

TRG4=VelCurve loud2 norm norm

XP80

Number = 1.00 Number = 1.10 Number = 1.20

TRG2=Type For Snare : SN-1

For Tom : TM-1

For Snare : SN-4

For Tom : TM-4

For Snare : SN-6

For Tom : TM-6

TRG4=VelCurve loud1 norm norm

PCY100

Number = 1.00 Number = 1.10 Number = 1.20

TGR2=Type CY-1 / CY-2 / CY-3* CY-1 / CY-2 / CY-3* CY-1 / CY-2 / CY-3*

TRG4=VelCurve norm norm norm

*1 In case if you feel the XP70 wouldnt sound when you hit it softly, please increase the value of the parameter Gain

in TGR3 = Gain, MVl.

*2 CY-1 is the setting that the sensitivities of the three sections(Bow / Edge / Cup) are the same.

CY-2 is the setting that the sensitivity of the Edge section is set fairly lower than the other section.

CY-3 is the setting that the sensitivity of the Cup section is set fairly lower than the other section.

APPENDIX : How to setup the trigger setup settings?

1. Press the [SHIFT] + [DRUM KIT] buttons to call up the Trigger Setup Select page (TRG1). The currently

selected Trigger Setup is indicated in the display.

* If you want to edit a different trigger setup, use the jog dial and select the setup here.

2. Press the [<]/[>] buttons to change pages(TRG2 through TRG8) and move the ashing cursor to the

parameter you want to set.

*To select the Trigger Input (input jack) you want to edit, simply hit the pad you want to edit or use the

[SHIFT] + [<]/[>] buttons.

3. Rotate the jog dial to change the setting as listed in the tables above.

4. Press the [SAVE/ENTER] button.

5. Rotate the jog dial to select the destination trigger setup number (811).

*If you want to change the Trigger Setup name, press the [<]/[>] buttons to move the ashing cursor to the

character you want to edit, then rotate the jog dial to select a chara

Manualsnet FAQs

If you want to find out how the DTX500 Yamaha works, you can view and download the Yamaha DTX500 Drum Kit Setup Guide on the Manualsnet website.

Yes, we have the Setup Guide for Yamaha DTX500 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Setup Guide should include all the details that are needed to use a Yamaha DTX500. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha DTX500 Drum Kit Setup Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha DTX500 Drum Kit Setup Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha DTX500 Drum Kit Setup Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha DTX500 Drum Kit Setup Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha DTX500 Drum Kit Setup Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.