Contents

Yamaha APD-1 Demodulator Owner's Manual PDF

1 of 4
1 of 4

Summary of Content for Yamaha APD-1 Demodulator Owner's Manual PDF

OWNERS MANUAL MODE DEMPLOI

BEDIENUNGSANLEITUNG BRUKSANVISNING

MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

1

Natural Sound RF Demodulator

APD-1 ENGLISH

This unit converts DOLBY DIGITAL AC-3 RF signal sent from a laserdisc player (with DOLBY DIGITAL AC-3 RF output) etc. to both optical and coaxial digital signals. Digital signals converted in this unit are output from both the OPTICAL and COAXIAL digital signal output terminals respectively.

This unit is useful for connecting a laserdisc player etc. whose DOLBY DIGITAL AC-3 output is an RF output only to a Dolby Digital Decoder or an amplifier equipped with a Dolby Digital Decoder which dose not have a DOLBY DIGITAL AC-3 RF signal input terminal.

SAFETY INSTRUCTIONS

1 Read Instructions All the safety and operating instructions should be read before the unit is operated.

2 Retain Instructions The safety and operating instructions should be retained for future reference.

3 Heed Warnings All warnings on the unit and in the operating instructions should be adhered to.

4 Follow Instructions All operating and other instructions should be followed.

5 Water and Moisture The unit should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

6 Carts and Stands The unit should be used only with a cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn.

7 Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

8 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9 Heat The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.

10 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit.

11 Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.

12 Cleaning The unit should be cleaned only as recommended by the manufacturer.

13 Nonuse Periods The power cord of the unit should be unplugged from the outlet when left unused for a long period of time.

14 Object and Liquid Entry Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit.

15 Damage Requiring Service The unit should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or exhibits a marked

change in performance; or E. The unit has been dropped, or the cabinet damaged.

16 Servicing The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.

17 Power Lines An outdoor antenna should be located away from power lines.

18 Grounding or Polarization Precautions should be taken so that the grounding or polarization is not defeated.

IMPORTANT Please record the serial number of this unit in the space below.

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owners Manual in a safe place for future reference.

Manufactured under license from Dolby Laboratories Licensing Corporation. Dolby, AC-3, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Explanation of Graphical Symbols

CAUTION

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Thank you for selecting this YAMAHA RF demodulator.

SPECIAL NOTES FOR FCC COMPOSITE DEVICE (for US customers only) This device is a composite system. The digital device component may not cause harmful interference.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

CAUTION (FOR CANADA MODEL) TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

FOR CANADIAN CUSTOMER THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

We Want You Listening For A Lifetime (for US customers only)

YAMAHA and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Associations Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.

1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2. Install this unit in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water.

3. Never open the cabinet. If something drops into the set, contact your dealer.

4. Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves.

5. Digital signals generated by the unit may interefer with other equipment such as tuners, receivers or TVs. Move the system farther away from such equipment if interference is observed.

6. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

7. When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet.

8. To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm.

9. Grounding or polarization Precautions should be taken so that the grounding or polarization of an appliance is not defeated.

10. The voltage to be used must be the same as that specified on this unit. Using this unit with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

11. Voltage Selector (General Model only) The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110-120/220-240 V AC, 50/60 Hz.

For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

Special Instructions for U.K. Model

IMPORTANT THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL Brown: LIVE

As the colours of the wires in the main lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Make sure that neither core is connected to the earth terminal of the three pin plug.

The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.

2

CONNECTIONS Never plug in this unit and other components until all connections are completed.

Example of Connections (See Fig. 1 on page 8) Laserdisc player with DOLBY DIGITAL AC-3 RF output or

another unit with DOLBY DIGITAL AC-3 RF output Dolby Digital Decoder or amplifier equipped with Dolby

Digital Decoder Coaxial cable (included) Coaxial cable (not included) Optical fiber cable (not included) To AC outlet * For connecting to the Dolby Digital Decorder or the amplifier,

use either the OPTICAL or COAXIAL cable connection. * Digital signals are output from both the OPTICAL and

COAXIAL DIGITAL OUT terminals of this unit respectively.

Notes For connecting to the OPTICAL terminal, use an optical fiber

cable that conforms to EIAJ standards. Other cables might not function correctly.

Be sure to attach the OPTICAL terminals cover when this terminal is not being used, in order to protect the terminal from dust.

SPECIFICATIONS Input (RF) ........................................................................ 75 ohms Output (Coaxial) .............................................. 0.5 Vp-p, 75 ohms Power requirements

U.S.A. and Canada models ................................. 120V, 60 Hz Australia model .................................................... 240V, 50 Hz Europe and U.K. models ...................................... 230V, 50 Hz General model ........................... 110-120/220-240V, 50/60 Hz

Power consumption ............................................................... 8W Dimensions (W x H x D) .......................... 100 x 62.4 x 132.5 mm

(3-15/16 x 2-7/16 x 5-3/16) Weight ........................................................... 0.8 kg (1 lbs. 12 oz.)

Accesoriese ....................................................... Coaxial cable x 1

7

ENGLISH

BRANCHEMENTS Ne jamais brancher cet appareil et les autres composants avant davoir compltement effectu tous les raccordements.

Exemple de branchements (Voir lillustration 1 de la page 8.) Lecteur de disques laser avec sortie DOLBY DIGITAL AC-3

RF ou autre appareil avec sortie DOLBY DIGITAL AC-3 RF Dcodeur numrique Dolby ou amplificateur quip dun

dcodeur numrique Dolby Cble coaxial (inclus) Cble coaxial (non inclus) Cble fibres optiques (non inclus) Vers la prise secteur * Pour ce qui concerne le branchement du dcodeur numrique

Dolby ou de lamplificateur, utiliser la connexion de cble OPTICAL ou bien COAXIAL.

* Des signaux numriques sont mis respectivement des bornes OPTICAL et COAXIAL DIGITAL OUT de cet appareil.

Remarques Pour raccorder la borne OPTICAL, utiliser un cble fibres

optiques conforme aux normes EIAJ. Les autres cbles risquent de ne pas fonctionner correctement.

Veiller fixer le couvercle de la borne OPTICAL lorsque cette borne nest pas utilise, afin de protger la borne contre la poussire.

SPECIFICATIONS Entre (RF) ..................................................................... 75 ohms Sortie (Coaxial) ............................................... 0.5 Vc.c, 75 ohms Alimentation

Modles pour les Etats-Unis et le Canada ......... 120V, 60 Hz Modle pour lAustralie ....................................... 240V, 50 Hz Modles pour IEurope et le Royaume-Uni ........ 230V, 50 Hz Modle gnral .......................... 110-120/220-240V, 50/60 Hz

Consommation ...................................................................... 8W Dimensions (L x H x P) ........................... 100 x 62,4 x 132,5 mm Poids .................................................................................... 0,8 kg

Accessoires ...................................................... Cble coaxial x 1

FRANAIS

ANSCHLSSE Schlieen Sie dieses Gert und die anderen Komponenten erst an einer Netzsteckdose an, nachdem alle Anschlsse gemacht worden sind.

Anschlubeispiel (siehe Abb. 1 auf Seite 8) Laserdisc-Player oder anderes Gert mit HF-Ausgang

DOLBY DIGITAL AC-3 Dolby-Digital-Dekoder oder Verstrker, der Dolby-Digital-

Dekoder ausgerstet ist Koaxialkabel (mitgeliefert) Koaxialkabel (nicht mitgeliefert) Lichtleiterkabel (nicht mitgeliefert) zur Netzsteckdose * Verwenden Sie Kabelanschlu OPTICAL oder COAXIAL fr

den Anschlu an einem Dolby-Digital-Dekoder oder Verstarker. * Die digitalen Signale liegen sowohl an den Buchsen OPTICAL

als auch COAXIAL DIGITAL OUT dieses Gertes an.

Hinweise Fr den Anschlu an der Buchse OPTICAL mu ein

Lichtleiterkabel verwendet werden, das der EIAJ-Norm entspricht. Bei anderen Kabeln knnen Strungen auftreten.

Bringen Sie an der Buchse OPTICAL zum Schutz vor Staubeintritt die Abdeckung an, falls die Buchse nicht verwendet wird.

TECHNISCHE DATEN Eingang [RF (HF)] ........................................................... 75 Ohm Ausgang (koaxial) ............................................0,5 Vp-p, 75 Ohm Spannungsversorgung

USA- und Kanada-Modell .................................... 120V, 60 Hz Australien-Modell ................................................ 240V, 50 Hz Europa- und Grobritannien-Modell .................. 230V, 50 Hz Allgemeines Modell ................... 110-120/220-240V, 50/60 Hz

Leistungsaufnahme ............................................................... 8W Abmessungen (B x H x T) ....................... 100 x 62,4 x 132,5 mm Gewichtt ............................................................................... 0,8 kg

Zubehrteile ....................................................... Koaxialkabel x 1

DEUTSCH

ENGLISH

NEDERLANDS

ESPAOL

ITALIANO

FRANAIS

DEUTSCH

SVENSKA

POWER

DEMODULATE

NATURAL 80UND RF DEMODULATOR APD1

TURNING THE POWER ON/OFF When you use this unit, depress the POWER switch on the front panel inward (on). When you finish using this unit, press the POWER switch to release it outward (off).

DEMODULATE indicator * This indicator lights up when this unit is

demodulating input signals normally.

ATTIVAZIONE E DISATTIVAZIONE DEL DISPOSITIVO

Per poter utilizzare questo dispositivo premere in dentro (attivazione) il tasto POWER, ubicato sul pannello anteriore. Terminato luso del dispositivo, premere di nuovo il tasto POWER per farlo fuoriuscire (disattivazione).

Indicazione di demodulazione (DEMODULATE) * Lindicazione si illumina quando lapparecchio

demodula normalmente i segnali in ingresso.

MISE SOUS/HORS TENSION DE LAPPAREIL Lorsquon utilise cet appareil, enfoncer linterrupteur POWER situ sur le panneau avant (sous tension). Lorsquon a fini dutiliser cet appareil, appuyer sur linterrupteur POWER de manire le refaire sortir vers lextrieur (hors tension).

Tmoin DEMODULATE * Ce tmoin sallume lorsque cet appareil

dmodule normalement les signaux dentre.

ENCENDIDO/APAGADO DEL APARATO Para usar este aparato, presione hacia adentro el interruptor POWER del panel de control. Para dejar de usar este aparato, presione el interruptor POWER del panel de control de manera que el interruptor quede hacia afuera.

Indicador DEMODULATE * Este indicador se enciende cuando el

aparato est demodulando normalmente las seales de entrada.

EIN- UND AUSSCHALTEN DES GERTES Drcken Sie zum Einschalten den Netzschalter (POWER) an der Frontseite in die eingerastete Stellung (on). Drcken Sie zum Ausschalten den Netzschalter (POWER) nochmals, um den Schalter auszuschalten (off).

Anzeige DEMODULATE * Diese Anzeige leuchtet whrend dem normalen

Demodulieren von Eingangssignalen.

IN- EN UITSCHAKELEN Druk wanneer u dit apparaat gaat gebruiken de POWER schakelaar op het voorpaneel naar binnen (aan). Druk wanneer u het gebruik van dit apparaat gaat beindigen de POWER schakelaar in zodat deze terug naar buiten springt (uit).

DEMODULATE indicator * Deze indicator licht op wanneer dit

apparaat de ingangssignalen op de normale wijze demoduleert.

ATT SL P OCH AV STRMMEN Nr du anvnder denna enhet, tryck in POWER-knappen p frampanelen (till). Nr du slutat anvnda denna enhet, tryck ter p POWER- knappen s att den kommer ut (av).

DEMODULATE-indikator * Denna indikator tnds nr enheten

demodulerar ingngssignalerna normalt.

DEMODULATE

DEMODULATE DEMODULATE

DEMODULATEDEMODULATE

DEMODULATE

DEMODULATE

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE

Manualsnet FAQs

If you want to find out how the APD-1 Yamaha works, you can view and download the Yamaha APD-1 Demodulator Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha APD-1 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha APD-1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha APD-1 Demodulator Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha APD-1 Demodulator Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha APD-1 Demodulator Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha APD-1 Demodulator Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha APD-1 Demodulator Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.