Yamaha YMC-700 Controller Software Update PDF

1 of 3
1 of 3

Summary of Content for Yamaha YMC-700 Controller Software Update PDF

Software Update Procedure for YMC-700

Page.1 of 3

IMPORTANT NOTICE Do not attempt to update your neoHD using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty. The following pages contain the software update instructions for neoHD Media Controller, YMC-700. You can easily apply the latest software through the Internet or by using a USB thumb drive. In order to properly execute the update, read all instructions carefully. Note: If your neoHD is connected to the Internet, Network Update is recommended. In this case, USB thumb drive is unnecessary. Simply select: Setup > Update > Network Update

Software Update Procedure for YMC-700

Page.2 of 3

PREPARATION Download the corresponding software file, YMC700_FIRMWARE_Vxxx.zip for your neoHD from Yamaha website. Unzip and copy the software file to the root folder of your USB thumb drive

Note: We recommend that you DO NOT store any other files or documents on your

thumb drive during this software update

PROCEDURE STEP1 Insert USB thumb drive to the USB terminal located on the rear side

of your neoHD.

STEP2 Power ON the neoHD.

The software file, YMC700_xxx.bin

Software Update Procedure for YMC-700

Page.3 of 3

STEP3 Enter USB Update. From the TOP MENU, select Setup. Move cursor down and select Update.

Select USB Update and when Start updating? appears, select Yes.

Note: In case Update file is not found appears on your TV, the data in your USB

thumb drive may have some issue. Re-copy the software data (BIN file), and retry. Make sure the software is stored in the root folder of your thumb drive. If the software is stored in a folder, neoHD cant detect it.

STEP4 NEOHD will start the update automatically.

Progress will be shown on TV. Allow about 3 minutes for the update. When the update is completed, neoHD will turn itself off.

STEP5 Confirm updated software version. Power ON and enter Setup. Move cursor down and select Update. Then, select System Information </

Manualsnet FAQs

If you want to find out how the YMC-700 Yamaha works, you can view and download the Yamaha YMC-700 Controller Software Update on the Manualsnet website.

Yes, we have the Software Update for Yamaha YMC-700 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Software Update should include all the details that are needed to use a Yamaha YMC-700. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha YMC-700 Controller Software Update is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha YMC-700 Controller Software Update consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha YMC-700 Controller Software Update free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha YMC-700 Controller Software Update, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha YMC-700 Controller Software Update as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.