Contents

Yamaha YCHS7018 Chimes Owner's Manual PDF

Yamaha YCHS7018 Chimes Owner's Manual PDF
Pages 10
Year 2019
Language(s)
German de
English en
French fr
Japanese ja
Korean ko
Russian ru
Spanish sp
Chinese zh
Portuguese pt
1 of 10
1 of 10

Summary of Content for Yamaha YCHS7018 Chimes Owner's Manual PDF

CHIMES

YCH7018 YCH6018 CHIME STAND

YCHS7018 YCHS7006

Owners Manual

Benutzerhandbuch

Mode demploi

Manual de instrucciones

Manual do Proprietrio

E n

g li

s h

D e u

ts c h

F ra

n

a is

E s

p a

o

l P

o rt

u g

u

s P

YCH7018YCHS7006

JA KOZH-TWRUPTESFRDEEN ZH-CN

2 YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual

PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from the chimes overturning, falling, the assembly running out of control or the parts falling.

Lock the casters except when moving or transporting the chimes.

Use a sufficient number of people when moving or transporting the chimes.

The chimes should only be moved across smooth, flat surfaces when using the casters. Always move the chimes slowly, supporting the side frames as shown in the illustration. Never move the chimes on a sloped, unstable, or gravel surface.

Never run when moving or transporting the chimes. Doing so can result in the chimes running out of control, hitting an obstacle or wall and causing serious injury.

With the sound tubes attached, do not lift the chimes and do not go up or down stairs with the chimes. Only move the chimes after the unit has been disassembled.

Stop use immediately if you notice any of the following abnormalities in the casters. - One of the casters stops rotating when moving. - The stoppers behave abnormally. These could cause the chimes to move or tip over, possibly causing injury.

Do not go near the chimes during an earthquake. Strong shaking during an earthquake could cause the chimes to move or tip over, possibly causing injury.

CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:

When transporting the chimes, make sure that all caster locks are released.

When removing the chimes from the package, raising the chimes and assembling the stand, always use two or more people. Failure to do so might result in damage to the chimes or the chimes overturning, and possibly causing injury.

Assemble the chimes in the proper sequence by following the assembly instructions in this manual. Failure to do so might result in chimes overturning, and possibly causing injury.

Make sure to tighten the screws or bolts regularly. Failure to do so might result in misalignment of the chimes during playing, noises, possibly causing injury.

Use only the specified chime stand. Failure to do so might result in the sound tubes falling, and possibly causing injury.

Before every playing, make sure to confirm that the wires are not damaged and that all wires are properly secured. Replace any wire that is damaged. Failure to do so might result in the sound tubes falling, and possibly causing injury.

When handling the sound tubes, be careful not to drop them. Especially be careful when transporting and attaching or removing the sound tubes, and when replacing the wires. Failure to do so may result in damage to the sound tubes, possibly causing injury.

Do not recklessly swing the chime mallets. It may injure people or damage surrounding objects.

Make sure to periodically check that the screws and bolts are not loose. Use the included hex key of the YCHS7006. For models other than YCHS7006, use the hex key you own or consult qualified Yamaha service personnel.

Keep small parts (such as wires, wire caps, screws or bolts) away from small children who might accidentally swallow them.

Replace the wire cap if it is damaged. Do not directly touch the frayed wire with your hand. Before playing, make sure to check that the tops of all the sound

tubes are in line. Failure to do so might result in the sound tubes falling, and possibly causing injury.

Do not insert your finger, hand or foot in any gaps on the casters, height adjustment mechanism or active part of dampers. Doing so can result in pinching your finger/hand/foot, and possibly causing injury.

Moving the instrument

Handling

Moving the instrument

Assembly

Handling

YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual3

NOTICE When transporting the chimes, remove all sound tubes from

the chime stand. After the sound tubes are removed, wrap them in a soft cloth, etc., to prevent scratching while transporting.

When attaching or removing the sound tubes, do so in a place where there is sufficient room, so that the tubes do not come into contact with other objects.

When transporting or moving the instrument, do not subject it to strong shocks.

The sound tubes pitch and/or tone may change if the tubes are scratched or bent. Be careful to avoid this.

Hit the Head cap when playing the chime. Never directly hit the sound tube with the chime mallet. Failure to do so might result in damage to the sound tube.

Do not use hammers other than chime mallets for playing the chimes. Doing so can result in damage to the sound tube.

Do not use the chime mallets for anything other than playing the chimes.

Always use the chimes on a flat, level surface. The chimes will not function properly on a sloped surface.

Do not rest your weight, or place heavy objects on the damper pedal. Doing so can result in damage to the damper.

When not playing the chimes, contact the damper with the sound tubes. Doing so prevents resonance of the sound tubes from the acoustic sound of surrounding instruments.

Do not keep the chimes in an environment with high temperature or high humidity.

When cleaning the product, wipe with a soft and dry cloth. Do not use thinners or polishing preparations.

INFORMATION When exposed to the air, the sound tubes may discolor over

time, but this does not affect the sound quality.

Use the sound tube and chime stand in the correct combination. When a sound tube for the YCH6018 is attached to the YCHS7018, the reverberation cannot be shortened by the damper pedal.

The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.

The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Chime mallet

Sound tube

Head cap

4 YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual

Introduction Thank you for purchasing the Yamaha YCH series chimes. YCH7018 is a set of the stand YCHS7018 and the sound tubes (YCHT7018). YCH6018 is a set of the stand YCHS6018 and the sound tubes (YCHT6018). The product name in this manual uses the set name.

Accessories Chime mallet x2 (included in YCH7018 and YCH6018)

Spare wire x1 (included in YCH7018 and YCH6018)

Dust cover x1 (included in YCH7018 and YCH6018)

Tuning key x1 (included in YCH7018 and YCHS7018)

Hex key 5 mm x1 (included in YCHS7006)

Owners Manual x1 (this book)

Yamaha representative or the authorized distribu- tor list x1

Part Names YCHS7006

Base bar

Base (right)

Base (left)

Guide plate

Hanger

Side frame (left)

Side frame (right)

YCH7018 YCH6018 YCHS7018 The illustration shows the YCH7018, but the information applies to all models (except where indi- cated).

Side frame (right)

Side frame (left)

Damper unit

Hanger

Sound tubes (YCH7018, YCH6018 only)

Lock nut

Base (left)

Caster Pedal rod Fixing bolt

Damper rod

Base (right)

Bolt cap

Caster

Stopper

YCH7018, YCHS7018 only

Stopper

Damper Pedal

YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual5

Assembly Procedure Assembling the Stand: YCH7018, YCH6018, YCHS7018

YCH7018, YCH6018 and YCHS7018 are packaged assembled.

When taking the chimes out from the package and raising them, always use two or more people.

1. Take the stand out from the package, and then stand it on a flat, level surface.

2. Press down with your foot on the caster stop- pers to lock the casters.

3.Lower the damper pedal.

To lower the damper pedal, loosen the fixing bolt, lower the pedal, and then tighten the fixing bolt again.

4.Release the damper. To release the damper, push the damper stopper while pressing the damper pedal, and then release your foot from the pedal.

5. Install the sound tubes by following the assembly instructions in Attaching the Sound Tubes.

6.Adjust the amount of damper pedal depres- sion by following the instructions in Adjust- ing the Damper Pedal (YCH7018, YCH6018, YCHS7018).

CAUTION

This stopper switches between locking and unlocking the casters. (Press down on it to lock.)

Damper pedal

Fixing bolt

Damper stopper

6 YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual

Assembly Procedure

Assembling the Stand: YCHS7006

When assembling the chimes, always use two or more people.

1. Link the left and right bases with the base bar. Insert the base bar into the holes of the bases firmly all the way, and then tighten with the included bolts to secure using the included hex key.

2. Lock the stoppers of the left and right cast- ers.

3. Insert the side frames into the bases so that the hanger, guide plate and casters with stopper are on the player side.

Align the bolt holes on the side frame with bolt holes on the bases, and then temporarily fix with the included bolts.

4.Tighten the two bolts temporarily fixed in step 3.

5.Attach the sound tubes to the frame accord- ing to the Attaching the Sound Tubes (page 7).

CAUTION

Base (left)

Base bar

Base (right)

Bolt

Bolt

Switching the stopper

ON (lock)

OFF (unlock)

Side frame Side frame

Guide plate

Base Base

Bolt holes

Hanger

Player side

Bolts

YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual7

Assembly Procedure

Attaching the Sound Tubes

Install the sound tubes with the damper released.

1. Put the sound tubes on a stable, flat, level surface. To prevent damage to the tubes, place a soft cloth on the floor where the tubes will be placed.

2. Remove the protective film that was applied to the sound tube surface.

3. Hook both end balls of the wire in the grooves of the hanger. At this time, turn the note name toward the player.

Replacing the Wire

1. Hold the sound tube while being careful not to contact other sound tubes and stand, detach the end balls from the grooves of the hanger, and then remove the sound tube.

NOTICE When removing the sound pipes, pull them up straight.

Pulling them up aslant can cause the wire to contact the outside surface and result in damage to the chimes.

2.Put the sound tubes on a stable, flat, level surface. To prevent damage to the tubes, place a soft cloth on the floor where the tubes will be placed.

3.Remove the wire caps.

When removing the wire cap, pass the wire through the slit of the wire cap.

4.Replace the wire.

5.Attach the wire caps to the sound tube.

The wire is structured by multiple strands of thin metal wires. When a thin metal wire is cut, replace the wire with a wire which is not damaged. If the wire is broken, the sound tube might fall, and possi- bly causing injury.

NOTICE Replace the wire cap if it is damaged. If you keep using

the damaged wire cap, the wire will be easily damaged. Please contact qualified Yamaha service personnel about the wire cap (sold separately) for replacement.

NOTE Since the wire caps are very small and can be easily lost, be

careful when handling them.

End ballEnd ball

Hanger Hanger

Note name

Accidental tone side

YCH7018, YCH6018, YCHS7018

Generally, arrange the sound tubes as shown below. The places filled with gray are not used.

Natural tone side Long tube Short tube

End ballEnd ball

Wire cap

Slit

Wire

Wire cap

Slit

Wire

CAUTION

8 YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual

Preparation Before Playing Play the chimes on a flat, level surface.

In YCH7018 and YCHS7018, if some sound tubes are in contact with the damper felt while releasing the damper, adjust the four casters according to the steps below.

In YCH6018, if some sound tubes are in contact with the damper felt even while the damper is released, place the chimes on a flat, level surface.

For the YCHS7006, place the chimes where all sound tubes are not in contact with the guide plate.

Adjusting the Height of the Casters (YCH7018, YCHS7018)

1. Turn the lock nut on upper of the caster counterclockwise to release the height lock.

2. Turn the bolt cap of each caster using the included tuning key to adjust the chimes height from the floor. Turning it clockwise raises the height away from the floor, while turning it counterclockwise lowers it toward the floor.

3. After the height is adjusted, turn the lock nut clockwise to lock the height.

Adjusting the Damper Pedal (YCH7018, YCH6018, YCHS7018)

The damper holds the sound tubes with the damper felt to shorten the reverberation of the chime sound. While pressing the damper pedal, the damper is released and reverberations are heard. When you stop pressing the damper pedal, the damper will work and the reverberation will stop.

The position of the damper pedal can be adjusted by the following steps.

1.Loosen the fixing bolt.

2.Adjust the position of the damper pedal.

3.Tighten the fixing bolt to fix the damper pedal.

Using the damper stopper You can keep the damper release by pushing in the damper stopper while pressing the damper pedal. To release the damper stopper, press the damper pedal again.

NOTE When the depth of pressing the pedal is insufficient, the

damper stopper cannot be pushed in. In this case, adjust the damper pedal position so that you can fully depress the pedal.

Sound tube

Damper felt In contact Height adjustment required

Tuning key

Bolt cap

Lock nut

Damper pedal

Damper stopper

Fixing bolt

YCH7018 YCH6018 YCHS7018 YCHS7006 Owners Manual9

Troubleshooting The damper does not release

Stop pressing the damper pedal while pressing the damper stopper.

When the depth of pressing the damper pedal is insufficient, the damper stopper cannot be pushed in. In this case, adjust the damper pedal position so that you can fully depress the pedal.

Noise, poor sound

Place the chimes on a flat, level surface.

(YCH7018, YCHS7018 only) When the floor is not a level surface, adjust the height of the four casters.

When the wire cap is damaged, replace it with a wire cap which is not damaged. Please contact qualified Yamaha service per- sonnel about the wire cap (sold separately) for replacement.

Maintenance grease Apply a small amount of grease to the locations indicated below at least once a year, or as needed. A spray type lithium soap based grease is recommended.

Specifications

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website and then download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

YCH7018 YCH6018 YCHS7018 YCHS7006

Range C52F69 C52F69

Tube diameter (mm) 38.1 31.8

Dimensions (cm) W D H 81 71 177181 81 71 167 81 71 175179 56 68 181

Pitch (Hz) A=442 A=442

Damper Yes Yes Yes

Hight adjustment mechanism Yes Yes

Weight (kg) 85 63 30 15

18182 4000517700 http://www.yamaha.com.cn

: : 10-1 : :

Manualsnet FAQs

If you want to find out how the YCHS7018 Yamaha works, you can view and download the Yamaha YCHS7018 Chimes Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha YCHS7018 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha YCHS7018. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha YCHS7018 Chimes Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha YCHS7018 Chimes Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha YCHS7018 Chimes Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha YCHS7018 Chimes Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha YCHS7018 Chimes Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.