Contents

Yamaha AT-800 Bracket Owner's Manual PDF

Yamaha AT-800 Bracket Owner's Manual PDF
Pages 7
Year 2011
Language(s)
German de
English en
French fr
Italian it
Japanese ja
Korean ko
Russian ru
Swedish sv
Spanish sp
Chinese zh
Dutch; Flemish nl
1 of 7
1 of 7

Summary of Content for Yamaha AT-800 Bracket Owner's Manual PDF

E n

g lish

F ran

ais D

eu tsch

S ven

ska Italian

o E

sp a

o l

N ed

erlan d

s

ATTACHMENT

ATTACHE

AT-800

Owners Manual

Mode demploi

Bedienungsanleitung

Bruksanvisning

Manuale di istruzioni

Manual de instrucciones

Gebruiksaanwijzing

JTG

i

DIMENSIONS DIMENSIONS ABMESSUNGEN MATTSKISSER DIMENSIONI DIMENSIONES

AFMETINGEN

200 mm (7-7/8")

51 mm (2")

51 mm (2")

22 mm (7/8")

61.5 mm (2-3/8")

90 mm (3-1/2")

22 7

m m

( 8-

7/ 8"

)

21 5.

5 m

m (8

-1 /2

")

18 3

m m

( 7-

1/ 4"

)

308 mm (12-1/8")

410 mm (16-1/8")

(ISX-800)

E n

g lish

ATTACHMENT

AT-800 Owners Manual Thank you for selecting this Yamaha product. Be sure to read this manual thoroughly before using this product. After you have read this manual, retain it for future reference.

* For information on the dimensions of the Attachment, please refer to page i (back of the cover page).

SAFETY INSTRUCTIONS Always follow the instructions set forth in this manual when installing the audio unit using this

Attachment. Insufficiently secure installation or insecure Attachment could cause the audio unit to fall, resulting in personal injury. Install the audio unit so that it will withstand extended use and will not fall due to vibrations caused by earthquakes or children. To ensure safety, all screws must be tightened securely. Never hang from the audio unit or the Attachment.

Once the audio unit is installed, safety checks should be conducted on a regular basis. If the audio unit is used over an extended period of time, screws can become loose and the installation can become weaker due to the passage of time, vibrations, etc.

Yamaha is not responsible for any accident or personal injury caused by a falling audio unit, nor for damage to a wall caused by inappropriate wall conditions or inadequate installation.

Make sure to leave adequate ventilation space around the unit to allow heat generated by the audio unit to dissipate. Failure to provide adequate space around the unit could cause the audio unit to overheat internally, resulting in a fire.

Install the audio unit in a location where the units buttons will be easily accessible. Leave enough space around the unit so that you can easily insert a CD or connect a USB device, or iPod, etc. to the unit.

iPod

USB

CD

1 En

Make sure the package contains the following items.

Make sure that you leave adequate ventilation space around the unit and follow the instructions below. Be sure to use the specified mounting screws for installation to prevent the audio unit from falling. Illustrations for each step use the ISX-800.

1 Use the template on the back cover to mark screw positions on the wall with a pin.

2 Remove the template, and then attach commercially-available tapping screws (6 mm (1/4")) in the marked positions. To prevent the wall surface from being damaged, drill pilot holes, then attach the screws.

Notes Choose a secure wall or beam to fasten the screws. Do not install them into walls made of weak material that can easily come off,

such as mortar or plywood wall panels. Loose screws could cause the audio unit to fall, resulting in personal injury. Do not use screws shorter than the specified length, nails, or double-sided adhesive tape. Otherwise, the audio unit may fall due

to wear or vibration, possibly resulting in personal injury.

PACKAGE CONTENTS

ASSEMBLING PROCEDURE

Attaching the screws to the wall

Attachment (AT-800) Have the following items ready in addition:

Commercially available tapping screws (x4) (6 mm (1/4") , 31 mm (1-1/4") or more in length, 7 mm (1/4") or more in screw head diameter)

M4 screws that came with the audio unit (x4) (If the screws are being used to mount the audio unit on a dedicated stand, remove the screws.)

Phillips(+) screwdriver (Do not use electric tools.)

Weight: 1.3 kg (2.9 lbs)

Safety wire (x2)

Length: 300 mm (11-3/4")

Washer (x2)

(for M6, 16 mm (5/8") of outer diameter)

7 mm (1/4") or more

25 mm (1") or more

200 mm (7-7/8")

6 mm (1/4")

2 En

E n

g lish

1 Remove the rear cover and terminal cover from the audio unit.

If the audio unit has been mounted on a dedicated stand, remove the stand. Also, remove the power cable, antenna and/or external devices. Four M4 screws that you remove from the stand will be used in Step 3.

Note Spread a soft cloth under the audio unit to avoid any damage to the audio unit or work surface.

For more information, refer to the Assembly Guide for the ISX-800.

2 Connect the power cable, antenna and/or external devices.

Pass the cables through a hole in the bottom of the Attachment, then connect them to the audio unit. After connecting the cables, replace the terminal cover.

3 Install the Attachment on the audio unit. Attach four M4 screws that came with the audio unit (for attaching the stand to the audio unit). Do not tighten the screws using excessive force. Do not use electric tools.

Notes Be careful not to pinch the cables between the

Attachment and audio unit.

Make sure that you identify the screws for the rear cover and the screws for the stand correctly.

If you tighten the screws on a slant, the screw threads in the audio unit might break.

Installing the Attachment on the audio unit

The rear cover and the screws you removed from the rear cover will not be used to install the Attachment. Keep them in a safe place.

Terminal cover

Rear cover

3 En

1 Attach the safety wires to the Attachment. Attach the safety wires as shown in the figure on the right.

2 Installing the audio unit on the wall. Hang the audio unit by hooking the mounting holes on the upper part of the Attachment onto the screws in the wall.

3 Attach the safety wires to the wall. Pass the screws (commercially available) through the washers (supplied), and then through the loops on the end of the safety wires, and tighten the screws into the wall to secure the safety wires while removing any slack of the wires.

Notes Make sure that the screws are strong

enough to bear the weight of the audio unit and the Attachment in case they fall.

Choose a secure wall or beam to fasten the screws.

Notes After installation is complete, make sure that the audio unit is securely affixed. Yamaha is not responsible for any accident

caused by inappropriate wall conditions or inadequate installation. Be sure to secure the cables so that they will not be caught by feet or hands, possibly causing the audio unit to fall.

Installing the audio unit on the wall

Slip one end through the loop at the other end

Safety wire

<

Manualsnet FAQs

If you want to find out how the AT-800 Yamaha works, you can view and download the Yamaha AT-800 Bracket Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha AT-800 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha AT-800. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha AT-800 Bracket Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha AT-800 Bracket Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha AT-800 Bracket Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha AT-800 Bracket Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha AT-800 Bracket Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.