Yamaha ELS-02 Bench Owner's Manual PDF

1 of 2
1 of 2

Summary of Content for Yamaha ELS-02 Bench Owner's Manual PDF

Checking the included items

Remove all parts from the package and make sure you have all of the items. Bench board 1 Legs 4 Foot rest 1 Bolts 4 Washers 4 Screws 4 Wrench* 1 *Wrench is attached on the backside of bench board.

Bench assembly

1 Turn the bench board over and install two legs for the front side. Tighten the bolts using the included wrench (as shown).

CAUTION Make sure to put washers between the bolts and the bench board. Make sure to properly tighten all bolts so that there is no gap between the bolts and the washers. If the bolts are not properly tightened, accident or injury may occur.

2 Install the foot rest to the legs with the included four screws, using a screwdriver.

3 Install the two legs for the back side. Have a Phillips-head (+) screwdriver of the appropriate size ready.

Washer Bolt

Logo is written on back

L

R

After completing the assembly, be sure to read the PRECAUTIONS section of the Owners Manual of ELS-02/ELS-02C.

Foot rest

Bench for ELS-02/ELS-02C Owners Manual

1

Post-assembly checklist

After completing the assembly, please check the following.

Are all of the bolts and screws properly tightened? Make sure to properly tighten all bolts and screws.

Is the bench stable? If the bench is unstable, adjust the bench legs, referring

to the instructions in the next section, If the bench is unstable.

Are the legs attached correctly (left and right)?

If the bench is unstable

If the bench is unstable, adjust it in the following manner.

1 With the legs on the floor in the normal position, temporarily loosen the bolts indicated with a mark written on them.

2 Tighten the bolts that attach the legs using the included wrench. Make sure to properly tighten all bolts so that there is no gap between the bolts and the washers.

3 Return the bench to the original position, and check that the bench is stable. If the bench is in any way unstable, adjust it in steps 1 and 2 again. If this does not solve the problem, contact your Yamaha dealer.

Logo is written on back

L

R

If the bench bolts/screws become loose due to extensive long-term use, tighten them periodically using the included tool and a screwdriver.

Washer

Bolt

C.S.G., DMI Development Division 2014 Yamaha Corporation

Published 04/2014 MW-01B0

EN

Manualsnet FAQs

If you want to find out how the ELS-02 Yamaha works, you can view and download the Yamaha ELS-02 Bench Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha ELS-02 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha ELS-02. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha ELS-02 Bench Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha ELS-02 Bench Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha ELS-02 Bench Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha ELS-02 Bench Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha ELS-02 Bench Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.