Yamaha TSX-10 Audio System Owner's Manual PDF

1 of 28
1 of 28

Summary of Content for Yamaha TSX-10 Audio System Owner's Manual PDF

TSX-10 TSX-15 TSX-20

OWNERS MANUAL MODE DEMPLOI

BEDIENUNGSANLEITUNG BRUKSANVISNING

MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

TABLETOP STEREO SYSTEM SYSTEM HIFI TABLETOP

G B

02/TSX-10E(6.12)b 01.6.12, 4:17 PM1

CAUTION - VISIBLE AND/OR INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.AVOID EXPOSURE TO BEAM.

VARNING - SYNLIG OCH/ELLER OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD OCH SPARRAR AR URKOPPLADE. STRALEN AR FARLIG.

VARO ! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTINA NAKYVALLE JA/TAI NAKYMATOMALLE LASERSATEILYLLE. ALA KATSO SATEESEEN.

VARNING - SYNLIG OCH/ELLER OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRALEN.

ATTENTION - RADIATION LASER VISIBLE ET/OU INVISIBLE LORSQUE LAPPAREIL EST OUVERT ET QUE LE VERROUILLAGE EST DESACTIVE. EVITEZ TOUTE EXPOSITION AU FAISCEAU.

VORSICHT ! SICHTBARE UND/ODER UNSICHTBARE LASERSTRAHLUNG TRITT AUS,WENN DECKEL GEOFFNET UND WENN SICHERHEITSVERRIEGELUNG UBERBRUCKT IST. NICHT DEM STRAHL AUSSETZEN.

MODEL NO. CRX-TS10 230 VOLTS 35 WATTS 50 Hz ~ MADE IN MALAYSIA

CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT

CAUTION - VISIBLE AND/OR INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

VARNING - SYNLIG OCH/ELLER OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD OCH SPARRAR AR URKOPPLADE. STRALEN AR FARLIG.

VARO ! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTINA NAKYVALLE JA/TAI NAKYMATOMALLE LASERSATEILYLLE. ALA KATSO SATEESEEN.

VARNING - SYNLIG OCH/ELLER OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRALEN.

ATTENTION - RADIATION LASER VISIBLE ET/OU INVISIBLE LORSQUE LAPPAREIL EST OUVERT ET QUE LE VERROUILLAGE EST DESACTIVE. EVITEZ TOUTE EXPOSITION AU FAISCEAU.

VORSICHT ! SICHTBARE UND/ODER UNSICHTBARE LASERSTRAHLUNG TRITT AUS,WENN DECKEL GEOFFNET UND WENN SICHERHEITSVERRIEGELUNG UBERBRUCKT IST. NICHT DEM STRAHL AUSSETZEN.

CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT

VARO! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NKYMTTMLLE LASERSTEILYLLE. L KATSO STEESEEN.

VARNING! OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD OCH SPRREN R URKOPPLAD. BETRAKTA EJ STRLEN.

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

ATTENTION Lemploi de commandes, de rglages ou un choix de procdures diffrents des spcifications de cette brochure peut entraner une exposition dventuelles radiations pouvant tre dangereses.

ACHTUNG Die Verwendung von Bedienungselementen oder Einstellungen oder die Durchfhrung von Bedienungsvorgngen, die nicht in dieser Anleitung aufgefhrt sind, kann zu einem Kontakt mit gefhrlichen Laserstrahlen fhren.

OBSERVERA Anvndning av kontroller och justeringar eller genomfrande av andra procedurer n de som specificeras i denna bok kan resultera i att du utstter dig fr farlig strlning.

ATTENZIONE Uso di controlli o regolazioni o procedure non specificamente descritte pu causare lesposizione a radiazioni di livello pericoloso.

PRECAUCIN El uso de los controles o los procedimientos de ajuste o utilizacin diferentes de los especificados en este manual pueden causar una exposicin peligrosa a la radiacin.

VOORZICHTIG Gebruik van bedieningsorganen of instellingen, of uitvoeren van handelingen anders dan staan beschreven in deze handleiding kunnen leiden tot blootstelling aan gevaarlijke stralen.

*: This label also shows the model number, required

voltage and power consumption of this unit, and other cautions, etc.

*

02/TSX-10E(6.12)b 01.6.12, 4:17 PM2

1

E n

g lish

Remote control

Battery (CR2025)

AM loop antenna

Indoor FM antenna

Speaker cable x 2

Stand x 3

Mounting bracket

Non-slip pad x 4

Package number Components

CD receiver Speaker system

TSX-10 CRX-TS10 NX-TS10

TSX-15 CRX-TS20 NX-TS10

TSX-20 CRX-TS20 NX-TS20

INTRODUCTION

Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.

ENGLISH

FEATURES

Output Power per Channel 18 W + 18 W (4, 1 kHz, 10% THD)

Installation-free design Full Operation Remote Control Multi-Function Timer/Sleep Timer SUBWOOFER Output Terminal

Tuner 40-Station FM/AM Preset Tuning Multi-Function RDS Reception

CD Player S-bit DAC and 8fs Digital Filter Optical Digital Output Random and Repeat Play

Speakers 2-Way Bass-Reflex Speaker System

Magnetic Shielding Type

This owners manual covers three packages TSX-10, TSX-15 and TSX-20. Please check the package number of your product and its components by refering to the following table.

SUPPLIED ACCESSORIES

After unpacking, check that the following parts are included.

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

REP

TIME

RANDOM

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

Screw x 9

Paper pattern

03/TSX-10E(6.12)b 01.6.12, 4:17 PM1

2

INTRODUCTION ..................................... 1

FEATURES .............................................. 1

SUPPLIED ACCESSORIES ....................... 1

SETTING UP THIS SYSTEM .................... 2

PRECAUTIONS ....................................... 3

NAMES OF BUTTONS AND CONTROLS Front panel ........................................................... 4 Display................................................................. 4 Remote control .................................................... 5

GETTING STARTED Connections ......................................................... 6 Installation ........................................................... 8 CD preventive care ............................................ 10 Remote control .................................................. 11 Setting the clock ................................................ 12 Adjusting the brightness of the display ............. 12

LISTENING TO A SOURCE.................... 13

COMPACT DISC PLAYER OPERATIONS CD play.............................................................. 14 Selecting the time display.................................. 15 Random-sequence play ...................................... 15 Repeat play ........................................................ 16

TUNER OPERATIONS Listening to the radio ......................................... 17 Presetting stations .............................................. 18

RECEIVING RDS STATIONS Receiving RDS data .......................................... 19 PTY SEEK mode............................................... 20 Optional settings for RDS functions ................. 21

USING THE BUILT-IN TIMER Timer play ......................................................... 22 Sleep timer ......................................................... 23

ADDITIONAL INFORMATION Troubleshooting ................................................. 24 Specifications .................................................... 26

CONTENTS

Set up this system by allowing spaces specified in the figure or more around and behind the main unit to assure good ventilation. To prevent the ventilation holes from being obstructed, be sure not to place another unit or any object on top of the main unit. Otherwise, it may cause fire or damage to the main unit.

Cautions If the main unit is put inside a rack, the front of it must be fully open. When mounting this system on the wall, allow spaces specified in the figure around the system as well, however,

the space between the system and the wall is determined by the mounting bracket and screws used. When mounting this system on the wall, make sure that there is no metalic projection on the wall. If a metallic

projection get into an opening of the main unit, it may cause fire or an electric shock to the user.

SETTING UP THIS SYSTEM

When using the stands

10mm

100mm100mm

400mm

50mm

400mm

TIMERTIME ADJ

10mm

100mm

When not using the stands

03/TSX-10E(6.12)b 01.6.12, 4:17 PM2

3

E n

g lish

1 To assure the best performance, please read this manual carefully. Keep it in a safe place for future reference.

2 To avoid humming sounds, position this system away from other electrical appliances, motors and transformers. To prevent fire or electrical shock, do not place this system where it may get exposed to rain or any kind of liquid.

3 Avoid extreme temperature fluctuations or excessive use of a humidifier in the room where this system is installed to prevent condensation inside this system, which may cause an electrical shock, fire damage to this unit, and/or personal injury.

4 In order not to obstruct heat radiation, do not cover the main unit with a newspaper, a tablecloth, a curtain, etc. If the temperature inside the main unit rises, it may cause fire, damage to the main unit and/or personal injury.

5 Avoid installing this system in a place where foreign objects and liquid might fall. It might cause a fire, damage to this system and/or personal injury. Do not place the following objects on this system: Other components, as they may cause damage and/or

discolor the surface of this system. Burning objects (i.e., candles), as they may cause fire,

damage to this system and/or personal injury. Containers with liquid in them, as they may cause an

electrical shock to the user and/or damage to this system.

6 Do not use force on switches, controls or connection cables. Never pull the cables when disconnecting them.

7 Only the voltage specified on the main unit must be used. Using this system with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from the use of this system with a voltage other than that specified.

8 Placing the speakers on the same shelf or rack as the turntable can result in howling.

9 Secure placement or installation is the owners responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of this system.

10 Any time you note distortion, reduce the volume to a lower setting. Never allow the amplifier to be driven into clipping. Otherwise the speakers may be damaged.

11 Do not attempt to clean this system with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Disconnect the power cord from the wall outlet when not planning to use this system for a long period of time, or during an electrical storm, as it could be damaged by lightning.

13 Do not attempt to modify or fix this system yourself. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reason.

14 Be sure to read the Troubleshooting section regarding common operating errors before concluding that this system is faulty.

PRECAUTIONS: READ THIS BEFORE OPERATING THIS SYSTEM

This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear panel.

The laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described above.

Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

The main unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the unit itself is turned off. This state is called the standby mode. In this state, the unit is designed to consume a very small quantity of power.

CAUTION FOR CARRYING THE MAIN UNIT Before carrying the main unit, first remove the disc from the unit, press STANDBY/ON to turn the unit off, then disconnect the AC power plug from the wall outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Blue: NEUTRAL Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.

CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT

03/TSX-10E(6.12)b 01.6.12, 4:17 PM3

4

NAMES OF BUTTONS AND CONTROLS

Front panel

1 STANDBY/ON (P.13)

2 PHONES (P.13)

3 MEMORY/TIME ADJ (P.12, 18)

4 AUTO/MANL/TIMER (P.17, 22)

5 SLEEP (P.23)

6 OPEN/CLOSE (P.14)

7 DISPLAY (P.12, 22)

8 PRESET/BAND (P.17)

9 Display (P.4)

0 PRESET/TUNING / (P.17)

When TUNER is selected as an input source

$/!// (P.14)

When CD is selected as an input source

A ^ (Play/Pause) (P.14)

B VOLUME (P.13)

C INPUT/SNOOZE (P.8, 23)

D A/B/C/D/E (P.18)

When TUNER is selected as an input source

& (Stop) (P.14)

When CD is selected as an input source

Display

1 Multi information display

2 PRESET indicator (P.18)

3 STEREO indicator (P.17)

4 AUTO indicator (P.17)

5 RDS indicator (P.19)

6 RDS mode indicators (P.19)

7 PTY HOLD indicator (P.20)

8 TOTAL indicator (P.15)

9 B (Play) indicator (P.14)

0 TIMER indicator (P.22)

A SLEEP indicator (P.23)

B MEMORY indicator (P.18)

C TUNED indicator (P.17)

D REP S/F (repeat single/full) indicator (P.16)

E RANDOM indicator (P.15)

F B. BOOST (Bass boost) indicator (P.13)

G TONE indicator (P.13)

TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

INPUT SNOOZE

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD

1 3 4 8 62 5 7 9

A B C

D0

TONETOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

0 A

21 3 8 94 5 6

B C D E F G7

04/TSX-10E(6.12)e 01.6.12, 4:17 PM4

5

E n

g lish

Remote control

1 STANDBY/ON (P.13)

2 SLEEP (P.23)

3 B. BOOST (Bass boost) (P.13)

4 BASS/TREBLE (P.13)

5 LEVEL +/ (P.13)

6 FREQ/RDS (P.19)

7 PTY SEEK MODE/START (P.20, 21)

8 A/B/C/D/E (P.18)

9 PRESET / (P.18)

0 ^ (Play/Pause) (P.14)

A REP (Repeat) (P.16)

B RANDOM (Random) (P.15)

C INPUT (P.13)

D $ !/ (P.14)

E TIME (P.15)

F (Open/Close) (P.14)

G & (Stop) (P.14)

H MUTE (P.13)

I DISPLAY (P.12, 22)

J VOL (Volume) +/ (P.13)

NAMES OF BUTTONS AND CONTROLS

CRX-TS10/20 RDS V776930

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

REP

TIME

RANDOM

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

1

B

F

G

2

4

6

A

E

H

0

C

8

3

9

5

7

I J

D

04/TSX-10E(6.12)e 01.6.12, 4:17 PM5

6

4 MIN. /SPEAKER SPEAKERS SETTING

HRIZ OTHER OUT FM 75 UNBAL. GND AM

SUBWOOFER

CD DIGITAL OUT

OPTICAL

ANTENNA FOR USA : CLASS 2 WIRING

OUT IN

LINE

A

B

NX-TS20

NX-TS10

NX-TS20

NX-TS10

Connections

Never plug the AC power cord into the wall outlet until all connections are completed. Follow the steps as shown below to connect the system using the supplied cables and accessories.

Indoor FM antenna

AM loop antenna

Right speaker Left speaker

GETTING STARTED

To wall outlet

On the speakers (NX-TS20)

Red: positive (+) Black: negative ()

Caution Do not let the bare speaker wires touch each other as this could damage the main unit and/or speakers.

1 Connecting speakers

Connect the speakers to the SPEAKERS terminals of the main unit by using the speaker cables. Make sure that the polarity of the speaker cables is correct, i.e. the + and markings are observed. If these cables are reversed, the sound will be unnatural and lack bass.

On the main unit

On the speakers (NX-TS10)

Red: positive (+) Black: negative ()

1 Press the tab. 2 Remove approx. 10 mm

(3/8) of insulation from each of the speaker cables and insert the bare wire into the terminal.

3 Release the tab and secure the cable.

1 Unscrew the knob. 2 Remove approx. 10 mm

(3/8) of insulation from each of the speaker cables and insert the bare wire into the terminal.

3 Tighten the knob to secure the cable.

Loosen Tighten

1

3

2

04/TSX-10E(6.12)e 01.6.12, 4:17 PM6

7

E n

g lish

GETTING STARTED

2 Connecting antennas

AM loop antenna

Set up the AM loop antenna, then connect it.

Indoor FM antenna

Notes Use external FM/AM antennas if you need better reception.

Consult your dealer. The AM loop antenna should be placed apart from the main

unit. The antenna may be hung on a wall.

To enhance your system

A. To connect a Subwoofer (optional)

You can reinforce the bass frequencies by adding a subwoofer (optional). Connect the SUBWOOFER OUT terminal of the main unit to the INPUT terminal of the subwoofer.

B. To connect an external component

An external audio/video component can be connected to the LINE OUT (output) and/or IN (input) mini-jack terminals of the main unit.

Digital-to-digital recording is possible from a CD played on this system to an MD (or tape) on an external MD (or DAT) recorder by connecting the CD DIGITAL OUT (OPTICAL) terminal on the rear of the main unit to the MD (or DAT) recorder.

3 Connecting to the wall outlet

After all connections are finished, connect the AC power cord to a wall outlet.

GND AM

04/TSX-10E(6.12)e 01.6.12, 4:17 PM7

8

Installation You can install this system in various ways to fit neatly into your listening room (Except for the NX-TS20 speakers).

GETTING STARTED

Mounting the system on the wall

* The supplied paper pattern helps you to align the main unit with the speakers properly.

4 Hang the main unit and/or the speakers using the holes on the back on the protruding screws. * Make sure that the screws securely connect with the

narrow parts of the holes.

Important To avoid dropping and possible injury, be extremely

careful when mounting the system on the wall. Check if the wall is strong enough to carry the

weight of the unit (refer to the Specifications page). When in doubt, consult qualified service personnel.

Confirm that all screws are fastened tightly and the wall mounting screws are properly fitted into the holes of the bracket and the speakers.

To avoid accidents resulting from tripping over loose speaker cables, fix them to the wall.

YAMAHA shall not be liable for any accident caused by improper installation.

1 Attach the bracket on the main unit with the screws.

2 Mark where to fasten the screws on the wall using the paper pattern.

Wall mounting screws are not supplied with this system. Use screws suitable for the wall material. Also, select the screws of appropriate size for the holes size as illustrated below.

3 Drive the screws into the wall.

Paper pattern

Bracket

Main unit

Speaker

2 mm

Min. 20 mm

4 mm

Min. 20 mm

5 mm

10 mm

04/TSX-10E(6.12)e 01.6.12, 4:17 PM8

9

E n

g lish

GETTING STARTED

Standing the main unit and/or speakers on a surface

You can stand the main unit and/or the speakers on a hard surface at an angle of 45 degrees or 70 degrees using the supplied stands.

1 Peel off the seals of the non-slip pads and apply them to the bottom of the main unit and the stands.

2 Attach the stand to the main unit and/or the speakers with the screws.

* The standing angle can be selected as 45 or 70 degrees by attaching the stands upside-down.

3 Fine adjustment can be made by sliding the position of a screw within a rectangular hole so that you can align the main unit and the speakers.

Note Change the setting of the remote control sensor switch so that the main unit can receive the remote control signal properly;

When the switch is set to the HRIZ position, the sensor A is active.

When the switch is set to the OTHER position, the sensor B is active.

HRIZ OTHER

Main unit

Non-slip pad

Stand

Main unit

Speaker

70 degrees 45 degrees

A

B

Remote control sensor switch

04/TSX-10E(6.12)e 01.6.12, 4:17 PM9

10

CD preventive care This compact disc player is designed for use with the

following types of discs only. Never attempt to load any other type of disc into the unit. The unit can also play 8-cm (3-inch) compact discs.

Be sure to use only CD-R and CD-RW discs made by reliable manufacturers.

Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect disc play.

Do not use cleaning discs or warped discs. All of these could damage the unit.

To prevent malfunction of this unit Do not use any non-standard shaped CD (heart, etc.)

available on the market, because it may damage the unit.

Do not use a CD with tape, seals, or paste on it, because damage to the unit may result.

No!

Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center.

Do not try to clean the discs surface by using any type of disc cleaner, record spray, antistatic spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the discs surface.

Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc.

GETTING STARTED

Removing the front cover of the speakers

The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four holes on the inner surface of the cover with the four corresponding pegs on the speaker and push gently.

Note When the cover is removed, be sure not to touch the speaker units with your hands or to exert excessive force on them.

NX-TS20 NX-TS10

04/TSX-10E(6.12)e 01.6.12, 4:17 PM10

11

E n

g lish

Remote control

GETTING STARTED

Remote control operation range When the unit is hung on the wall, or installed with the stands, set the remote control sensor switch to the OTHER position. When using the unit installed horizontally, set the switch to the HRIZ position.

Notes There should be no large obstacles between the remote control

and the main unit. If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp, etc.), it might cause the remote control not to work correctly. In this case, reposition the main unit to avoid direct lighting.

If you install the unit horizontally and operate with the remote control from a higher position than the unit, setting the remote control sensor switch to OTHER may improve the response.

Loading the battery for the remote control

1 Slide out the battery holder from the remote control by pushing into the hole in the holder with a ball-point pen, etc.

2 Place the battery in the holder, positive side upward.

3 Slide the holder into the remote control.

Battery replacement If you find that the remote control must be used closer to the main unit than usual, the battery is weak. Replace the battery with new one.

Notes on the lithium battery Please take care when using the lithium battery as it may explode if mistreated. Never abuse or disassemble the battery. Be sure the battery polarity is correct. If it is not

installed correctly, it may cause fire or explosion. Avoid placing the lithium battery and also the remote

control with the battery installed, in high temperature such as direct sunlight.

Do not recharge the battery. When replacing the battery, make sure to only use a

CR2025 battery. Keep the battery out of reach of children. If swallowed,

get immediate medical help. When disposing of the battery, insulate it with tape, etc.

Never dispose of it in fire. Also, dispose of the battery according to local regulations.

If the battery leaks, dispose of it immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Skin contact may cause burn. If it occurs, wash with water promptly and get medical attention.

TIMERTIME ADJ

30 30

1 2

3

Remote control sensor

Within approximately 6 m (20 feet)

HRIZ OTHER

Remote control sensor switch

In the OTHER position In the HRIZ position

04/TSX-10E(6.12)e 01.6.12, 4:17 PM11

12

Setting the clock You must set the clock before you use the timer functions. The clock is based on the 12-hour system for U.S.A. and Canada models, and the 24-hour system for Europe, U.K., Australia and China models.

1 While the power is on, press DISPLAY to display the time.

2 While holding TIME ADJ, press HOUR + to set the hour. If you want to move the time in the reverse

direction, press HOUR while holding TIME ADJ.

3 While holding TIME ADJ, press MIN + to set the minutes. If you want to move the time in the reverse

direction, press MIN while holding TIME ADJ.

To display the clock Press DISPLAY. First Clock Time appears and then the current time is displayed for about 8 seconds. Then the normal display returns.

Note In the event of a power failure or when the AC power cord is

disconnected for more than five minutes, Set Clock may appear on the display instead of the current time. In that case, you need to reset the clock.

Adjusting the brightness of the display

You can adjust the brightness of the display not only when the unit is turned on but also in the standby mode. The adjustment can be made individually.

Press and hold DISPLAY for about two seconds so that Dimmer 0 appears on the display. While holding DISPLAY, turn VOLUME clockwise to increase or counterclockwise to decrease brightness.

Control Range: 0 to 6 (Preset value: 0)

Note During the standby mode, the display is not as bright as the

one when the unit is on. You can further decrease the brightness in the standby mode so that the light does not disturb in a dark ambience.

VOLUMEDISPLAY

HOUR +

DISPLAYTIME ADJ MIN +

GETTING STARTED

TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

INPUT SNOOZE

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD INPUT SNOOZE

HOUR

MIN

04/TSX-10E(6.12)e 01.6.12, 4:17 PM12

E n

g lish

13

TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD INPUT SNOOZE

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

REP

TIME

RANDOM

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

LISTENING TO A SOURCE

1 Turn on the power by pressing STANDBY/ON.

2 Select the desired input source by pressing INPUT repeatedly until the source appears on the display. When you operate the component connected to the

LINE IN terminal, select AUX.

3 Play the source. (Refer to the instructions of each selected component.)

4 Adjust the volume level by turning VOLUME on the main unit or pressing VOLUME +/ on the remote control.

Sound controls You can perform various sound controls using the remote control. These controls and VOLUME adjustment have no effect on the material being recorded with the component connected to the LINE OUT terminal.

MUTE: You can mute the sound. Press MUTE. Mute appears on the display. Pressing the button again cancels this feature.

BASS/TREBLE: You can adjust the level of low frequency response (BASS) and high frequency response (TREBLE).

1 Press BASS/TREBLE repeatedly until BASS 0dB or TREBLE 0dB appears on the display.

2 Press LEVEL /+ to adjust the level.

The value increases or decreases in steps of 2 dB.

Control range: 10dB to +10dB (Preset value: 0dB)

B. BOOST (Bass boost): You can reinforce the bass frequency response. Press B.BOOST. The B.BOOST indicator lights up on the display. Pressing the button again cancels this feature.

When you use headphones Connect the headphones to the PHONES jack. You can listen to the sound to be output from the speakers through the headphones.

When you have finished using this unit Press STANDBY/ON to set this unit to the standby mode. The brightness of the display decreases.

INPUT

VOLUMESTANDBY/ON

PHONES

This chapter explains the basic operations common to tuning, playing CDs and other connected components.

BASS/ TREBLE

B. BOOST

MUTE

STANDBY/ON

LEVEL /+

INPUT

VOLUME +/

05/TSX-10E(6.12)a 01.6.12, 4:17 PM13

14

COMPACT DISC PLAYER OPERATIONS

TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD INPUT SNOOZE

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

REP

TIME

RANDOM

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

To play CDs

1 Press STANDBY/ON to turn on this unit.

2 Press INPUT repeatedly until CD appears on the display.

CD play Never touch or look directly at the laser pickup lens when the cover is open.

3 Press to open the cover, and place a CD with the label side upward on the CD holder.

* Press down the CD until the holder clicks.

4 Press to close the cover.

5 Press ^ to start play. This unit starts play.

To pause play Press ^. To resume play, press ^ again.

To stop play Press &.

To remove the CD Press N to open the cover, and remove the CD from the

holder.

To play a specific track on the disc (Skip)

Press to skip forward or $ ! to skip backward. Press once for each track to be skipped.

Notes This operation can also be performed when the unit is in the

pause or stop mode. During stop mode, if or $ ! is pressed, the

track number successively changes to higher numbers (or lower numbers).

To advance or reverse playback rapidly (Search)

Press and hold to advance playback rapidly, and $ ! to reverse playback rapidly.

Note This unit cannot play a CD-R or CD-RW disc unless the disc

has been finalized. Please make sure to finalize the disc on the CD recorder before playing it on this unit.

^

&

^ &

$ !STANDBY/ON

INPUT

STANDBY/ON

$ ! INPUT

Holder

Laser pickup lens

06/TSX-10E(6.12)a 01.6.12, 4:17 PM14

15

COMPACT DISC PLAYER OPERATIONS E n

g lish

Each time you press TIME, the display changes as follows:

Press RANDOM. RANDOM indicator lights up on the display. The unit starts random sequence play.

To cancel the random-sequence play mode Press & or RANDOM. RANDOM disappears from the display.

Notes If is pressed during random-sequence play, the next

randomly programmed track will be played. If $ ! is pressed, play will return to the beginning of the current track.

The total remaining time on the disc will not be displayed during random-sequence play.

Random-sequence play The unit can play all the tracks in a random sequence.

RANDOM

Selecting the time display

You can select any of four time displays by pressing TIME.

TIME

Elapsed time of the current track

Total remaining time of the disc

Total disc play time

Remaining time of the current track

Current track number

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

REP RANDOM

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

TIME

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

TIME

RANDOMREP

&

$ !

TOTAL

TOTAL

06/TSX-10E(6.12)a 01.6.12, 4:18 PM15

16

COMPACT DISC PLAYER OPERATIONS

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

TIME

RANDOMREP

SINGLE REPEAT The current track is played repeatedly.

FULL REPEAT The current disc is played repeatedly. In random-sequence play mode, all randomly

sequenced tracks are played repeatedly, but each time in different order.

To cancel the repeat play mode Press REP successively until REP F disappears from the display.

Repeat play You can play any desired track or disc repeatedly. Press REP to select the repeat mode.

REP

REP S

REP F

06/TSX-10E(6.12)a 01.6.12, 4:18 PM16

17

E n

g lish

TUNER OPERATIONS E n

g lish

Automatic tuning

1 Select TUNER by pressing INPUT repeatedly until the frequency of a radio station appears in the display.

2 Press PRESET/BAND to select the AM or FM reception band. Do not select the preset tuning mode (in which PRESET appears on the display).

3 Press AUTO/MANL so that AUTO appears in the display.

4 Press PRESET/TUNING (for a higher frequency) or (for a lower frequency).

5 The unit starts searching for a station.

When the unit finds a station, the unit stops searching and TUNED appears on the display.

6 If the located station is not the one you want, repeat steps 4 and 5 until a station you want is tuned in.

Notes If automatic tuning search does not find the desired station, try

manual tuning as described next. When an FM stereo broadcast with sufficient signal strength is

received, STEREO appears on the display and you can listen to stereo sound.

Listening to the radio You can find radio stations automatically and manually.

Manual tuning

1 Follow steps 1 and 2 described in Automatic tuning.

2 Press AUTO/MANL so that AUTO disappears from the display.

3 Press PRESET/TUNING (for a higher frequency) or (for a lower frequency) to select the desired station. Each time you press PRESET/TUNING or

, the frequency changes in small steps.

PRESET/TUNING /

PRESET/BAND INPUTAUTO/MANL

TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD INPUT SNOOZE

AUTOSTEREO TUNED

07/TSX-10E(6.12)a 01.6.12, 4:18 PM17

18

TUNER OPERATIONS

3 Before MEMORY goes out, press A/B/C/D/E repeatedly to select the desired group (A to E) of preset stations.

4 Before MEMORY goes out, use PRESET/ TUNING / to select a desired preset number (1 to 8).

5 Press MEMORY. MEMORY, PRESET, and the preset number

appears on the display.

6 Repeat steps 1 to 5 until all desired stations are preset.

Notes A new station can be preset in place of a previous one. The preset stations are retained for a week after you disconnect

the AC power cord or if a power failure occurs.

To preset stations automatically

1 Select TUNER as the input source by pressing INPUT.

2 Press MEMORY for about 2 seconds. The unit starts presetting stations, AUTO and

MEMORY flash on the display.

Received stations are stored to A1, A2...A8 sequentially. After 40 stations or all FM and AM stations are stored, the display will show the station preset on A1.

To recall a preset station

1 Select TUNER as the input spurce.

2 If PRESET is not lit on the display, press PRESET/BAND to light it.

3 Select the desired preset station number by using A/ B/C/D/E and PRESET/TUNING / on the main unit (or ABCDE and PRESET / on the remote control).

TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD INPUT SNOOZE

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

REP

TIME

RANDOM

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

Presetting stations The unit can preset station frequencies selected by Automatic tuning or Manual tuning. Up to 40 stations can be stored. With this function, you can select any desired station by pressing the corresponding preset station number.

To preset stations manually

1 Tune in a desired station. (Refer to the previous page for the tuning procedure.)

2 Press MEMORY. MEMORY and PRESET flash on the display

for about 5 seconds.

INPUTPRESET/BANDMEMORY A/B/C/D/E

PRESET /

PRESET/TUNING /

The arrow appears for one second when the displayed station is preset successfully.

INPUT

ABCDE

STEREOPRESET TUNEDMEMORY

STEREOPRESET TUNEDMEMORY

Preset numberGroup

07/TSX-10E(6.12)a 01.6.12, 4:18 PM18

19

Playing CDsGetting Started

RECEIVING RDS STATIONS E n

g lish

Receiving RDS data RDS (Radio Data System) is a data transmission system used by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various types of information, such as PS (Program Service), PTY (Program Type), RT (Radio Text), and CT (Clock Time).

1 Tune in an FM station broadcasting RDS data. (Refer to page 17 and 18.)

2 Press FREQ/RDS to choose the mode. Each time you press FREQ/RDS, the type changes as follows:

FREQ/RDS

PS The name of the RDS station being received is displayed. If the unit cannot find a station with PS data, the unit stops

searching and NO PS appears on the display.

PTY The program type of the RDS station now being received is displayed. You can make this unit search for a statio which is broadcasting programs of a desired program type. (Refer to PTY program mode in the next section for details.)

RT Information about the program (such as the title of the song, name of the singer, etc.) on the RDS station being received is displayed by a maximum of 64 alphanumeric characters, including the umlaut symbol. If other characters are used by the RT data, they are displayed with an underscore. If the unit cannot find a station with RT data, the unit stops

searching and NO RT appears on the display.

CT Current time is displayed. If the unit cannot find a station with CT data, the unit stops

searching and NO CT appears on the display.

Notes RDS may not work properly if the station you have tuned in to

is not transmitting the RDS signal properly or if the signal strength is weak.

Some FM stations do not offer RDS services. Of those that do, not all provide the same types of services. The types provided by the received RDS station are dimmed on the display. Check with your local radio stations for details on available RDS services in your area.

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

TIME

RANDOMREP

RDS PS

RDS PTY

RDS CT

08/TSX-10E(6.12)b 01.6.12, 4:18 PM19

20

RECEIVING RDS STATIONS

PTY SEEK mode You can locate a desired station by selecting a program type. The unit searches all preset stations for the type of programs currently being broadcast among the RDS stations.

To locate a station

1 Tune in an FM station. (Refer to page 17 and 18.)

2 Press PTY SEEK MODE once so that PTY and a PTY program flash on the display.

3 Within about 20 seconds, press FREQ/RDS repeatedly until the desired program type appears on the display.

4 Within about 20 seconds, press PTY SEEK START. If a station broadcasting the selected program type

is found, the unit stops searching and the Program Service name appears on the display. PTY HOLD appears on the display.

5 Repeat step 4 until the desired station is located.

If there is no station broadcasting the program type you select, NO PTY appears on the display, then the Program Service name or frequency appears on the display.

List of Program Types

PTY SEEK MODE

FREQ/RDS PTY SEEK START

NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M.O.R. M

LIGHT M CLASSICS OTHER M

News Current Affairs General Information Sports Education Drama Culture Science Light Entertainment Pops Rock Middle of the Road Music (Easy-listening) Light Classics Serious Classics Other Music

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

TIME

RANDOMREP

PTY

RDSPRESET PTY PTY HOLD

08/TSX-10E(6.12)b 01.6.12, 4:18 PM20

21

Playing CDsGetting Started

RECEIVING RDS STATIONS E n

g lish

Optional settings for RDS functions

The tuner has the following functions which make use of the RDS data service. These are originally in operation ON. However, you can turn these functions OFF, if so desired.

defs

1 Select the FM band. (Refer to page 17.)

2 Press DISPLAY to display the current time.

3 Press FREQ/RDS.

4 Each time you press PTY SEEK MODE the display will change as follows:

1. CT = CLOCK (ON/OFF) The tuner corrects the time of the built-in clock automatically by synchronizing it with the CT data from the RDS station being received.

If you receive an RDS station of some other country, the built-in clock is synchronized with the time setting of that country.

If the built-in clock is not yet set for the current time or was reset due to a power failure, etc., it will be set for the time of the CT data automatically, whether this setting is ON or OFF.

2. LOCAL = CT (ON/OFF) If the RDS station being received employs the local time (daylight savings time, etc.) data service, its time is displayed in the CT mode.

3. A.M. = RDS (ON/OFF) RDS stations are searched instead of all FM stations by the automatic preset tuning operation when the setting is ON. (Refer to page 10.)

4. RT SPEED: 0 Changes the scrolling speed of radio text. Increase the value to increase the speed, and decrease the value to reduce the speed.

Control Range: 0 to 3 (Preset value: 0)

5 Choose the ON or OFF function by pressing PTY SEEK START and confirming it in the display. Press PTY SEEK START repeatedly to change the value for RT SPEED. If there is no operation for about 20 seconds, this

mode is cancelled and the frequency display returns. If the station is broadcasting PS data, it switches to the PS mode.

6 Press FREQ/RDS again to restore the frequency display mode.

PTY SEEK MODE

PTY SEEK START

FREQ/RDS

DISPLAY

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

MUTE VOL DISPLAY

INPUT

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

TIME

RANDOMREP

08/TSX-10E(6.12)b 01.6.12, 4:18 PM21

22

USING THE BUILT-IN TIMER

TONEPROGTOTALREPRDSAUTOSTEREOPRESET PSPTYRTCT B. BOOSTRANDOMS FPTY HOLDTUNEDMEMORYSLEEPTIMER

NATURAL SOUND CD RECEIVER

STANDBY/ON OPEN/CLOSE

MEMORY AUTO/MANL

TIMER

SLEEP

PRESET/TUNING

A/B/C/D/E

HOUR

MIN MIN

HOUR

PHONES DISPLAY

TIME ADJ

PRESET/BAMD INPUT SNOOZE

Timer play By using the built-in timer, you can have the unit turn on at a specified time and begin playing automatically. You can also specify the turn off time.

3. ON Time ON Time appears on the display for a second, and then changes to the time setting mode. Press HOUR /+ to set the hour. Press MIN /+ to set the minute.

4. OFF Time Set the time the same way as above. If you set the ON time but not any OFF time, timer play will finish automatically after an hour.

5. Timer Volume You can specify the desired volume level for the timer play by turning VOLUME or pressing VOLUME +/ on the remote control. If you adjust this setting during play, the

volume of the currently playing material changes so that you can confirm the volume level for the timer play. When the display mode changes, the volume reverts to the original level.

Note The display mode will change in about 8 seconds. If the

mode is changed before the setting is completed, call up the mode again by pressing DISPLAY once or more.

2 Press TIMER to complete the timer setting. If you press TIMER during the ON Time or

OFF Time mode, the system is put in the standby mode and TIMER lights up on the display. To continue using the system, press STANDBY/ON to turn on this unit.

When timer play starts, the backlight of the volume control starts flashing slowly. If TUNER is selected as the timer source, the current

time and the frequency of the current station appears on the display.

If CD has been selected as the timer source, the current time and the current track number appears on the display.

1 Press DISPLAY. Whenever DISPLAY is pressed, the display mode changes as follows:

1. Clock Time (TIMER on/off mode) If you have not set the clock yet, Set Clock appears. You need to set the current time as described on page 12.

2. Timer Input Select the source to be played by pressing INPUT.

When you select TUNER, you can select the desired preset station. Use PRESET/BAND, A/B/C/D/E and

PRESET/TUNING / on the main unit or PRESET / and ABCDE on the remote control to select the station.

When you select CD, the following display appears. You can specify the desired track you want to start playing and set the repeat and/or random-sequence mode.

Use $ !, to specify the track. Press REPEAT on the remote control to set

the repeat mode. Press RANDOM on the remote control to set

the random-sequence mode.

MIN INPUT SNOOZE

DISPLAY

HOUR TIMER HOUR +

MIN +STANDBY/ON

VOLUME

Current time Frequency

Current time Current track

09/TSX-10E(6.12)a 01.6.12, 4:18 PM22

23

E n

g lish

USING THE BUILT-IN TIMER

SLEEP

B. BOOST

LEVEL

STANDBY/ON

BASS/TREBLE

MODE

ABCDE

INPUT

TUNER

START

FREQ/RDS

PRESET PRESET

RTY SEEK

TIME

RANDOMREP

Sleep timer The unit can be turned off automatically at a selected SLEEP time.

1 Play the desired sound source.

2 Press SLEEP repeatedly until the desired sleep time appears in the display. Each time you press SLEEP, the sleep time changes as follows:

About 4 seconds after setting, the normal display will resume. SLEEP will appear in the display.

3 The unit will turn off automatically when the selected sleep time is reached.

Notes If you press SLEEP while the sleep timer is functioning, the

remaining time is displayed. Then pressing the button successively changes the sleep time described as above.

When you have set both the sleep timer and timer play, the unit turns off at the time which comes first (at the designated sleep time or the time set on 4. OFF TIME).

SLEEP

SLEEP 2h00m

SLEEP 1h30m

SLEEP 1h00m

SLEEP 0h30m

SLEEP OFF

To cancel the timer play setting Press DISPLAY to show the current time, then press TIMER so that TIMER goes off on the display. You can also cancel by pressing TIMER in the standby mode.

Note In the event of a power failure or when the AC power cord is

disconnected for more than five minutes, Set Clock may appear on the display instead of the current time. In that case, you need to reset the clock.

Snooze function With this feature, you can stop the timer play temporarily and resume play automatically in five minutes. When you set the timer play as the alarm, it helps you not to oversleep.

Press SNOOZE during timer play. The current time and Snooze turns on and off slowly on the display. Also the backlight of the volume control turns off.

Notes Some controls such as B (play), INPUT, etc. do not work in

the snooze mode. If you have selected CD as the input source, the unit resumes

from the beginning of the track that was playing when SNOOZE was pressed.

09/TSX-10E(6.12)a 01.6.12, 4:18 PM23

24

ADDITIONAL INFORMATION

Troubleshooting If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help.

The main unit does not switch ON when STANDBY/ON is pressed.

No sound from one speaker.

The sound suddenly disappers.

No sound from an external component connected with the main unit or play does not begin.

Sound distorted.

Cannot set timer.

The main unit does not work normally.

Excessive static in FM broadcasts.

Noise increases during stereo broadcast reception.

Stereo broadcasts are noisy and the STEREO indicator blinks on and off.

Cannot select preset stations.

Buzzing or static during AM broadcasts.

AM broadcast sensitivity is poor.

SYMPTOM CAUSE REMEDY

Securely connect the power cord.

Connect properly.

Check the speaker wires are not touching each other and then turn the main unit back on.

Connect the cords properly. If the problem persists, the cords may be defective.

Select AUX by pressing the INPUT button.

Turn on the component.

Set current time.

Unplug the AC power cord from the wall outlet, and then plug in again after about one minute.

Position the FM antenna as high and as far away from nearby roads as possible. Connect using a coaxial cable.

Check the antenna connection.

Install a multi-element type FM antenna if possible.

Install an antenna appropriate for the electric field strength of your area.

Reprogram memory presets.

The problem is difficult to eliminate, but can be lessened by grounding the AM loop antenna.

Move away from the TV or microprocessor.

Properly connect the AM loop antenna.

Change orientation of the AM loop antenna.

Install an external AM loop antenna.

The AC power cord is not connected or not completely connected.

Loose speaker connections.

The protection circuit has been activated because of a short circuit, etc.

Incorrect cord connections.

Input source selection is not proper.

The external component connected to the LINE IN terminal of the main unit is not turned on.

Current time is not set.

The internal microcomputer has been frozen by an external electric shock (lightning, excessive static electricity, etc.) or the power supply voltage is too low.

Interference from the starting motor of a nearby car.

Interference from the thermostat of a nearby electrical appliance.

Antenna input is too weak due to obstructions or excessive distance from the broadcasting station.

Insufficient antenna input.

Preset memory has been erased.

Interference from sources such as lightning, fluorescent lights, electric motors or the thermostat of nearby electrical appliance.

A TV or microprocessor is being used nearby.

Radio signal is weak or the antenna is not properly connected.

G E

N E

R A

L T

U N

E R

10/TSX-10E(6.12)b 01.6.12, 4:18 PM24

25

ADDITIONAL INFORMATION E n

g lish

SYMPTOM CAUSE REMEDY

Play does not begin.

Play is delayed, or begins at the wrong place.

Sound skips.

Sound hums.

Noise from inside of the unit.

The remote control does not work.

TV functions strangely when the remote control is being used.

Check the disc carefully; replace it if necessary.

Wait 20 to 30 minutes after switching the unit ON before trying to play a disc.

Reload the disc with the label side facing up.

Clean the disc.

Check the disc carefully; replace it if necessary.

Relocate the unit.

Clean the disc.

Securely connect the audio cables. If the problem persists, the cables may be defective.

Replace the disc.

Replace the battery with a new one.

Use within 6 meters and 60 degree radius.

Change the active remote control sensor to the other one by using the remote control sensor switch.

Change the position of the unit.

Relocate the main unit away from the TV or cover the TVs remote control sensor.

The disc is damaged.

There is moisture on the laser pick-up.

The disc has been loaded upside down.

The disc is dirty.

The disc may be scratched or damaged.

The unit is being subjected to vibrations or impacts.

The disc is dirty.

Improper cable connections.

The disc may be warped.

The battery of the remote control is too weak.

Remote control is too far away or is being used at an incorrect angle.

The active remote control sensor cannot receive the remote control signal.

Direct sunlight or strong lighting (of an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of the unit.

The remote control is being used near a TV set with a remote control sensor.

C D

P L

A Y

E R

R E

M O

T E

C O

N T

R O

L

10/TSX-10E(6.12)b 01.6.12, 4:18 PM25

26

ADDITIONAL INFORMATION

Specifications Amplifier section Minimum RMS output power per channel

.................................................. 18 W +18 W (4 1kHz 10% THD) DIN Standard output power per channel (Europe model)

.................................................... -- W + -- W (-- 1kHz --% THD) Input sensitivity/Impedance

AUX .......................................................................... 250 mV/47 k Frequency Response

...................................................................... -- Hz to -- kHz, -- dB Total Harmonic Distortion (20 Hz to 20 kHz)

12.5 W, 6 ................................................................................. --% Signal-to-Noise Ratio (IHF-A Network)

(250 mV, Input Shorted) ........................................................... -- dB Output Level/Impedance

SUBWOOFER ................................................................. -- V/-- k PHONES ............................................................................ -- V/--

Tuner section Tuning range

FM [U.S.A. and Canada models] .............................................................................. 87.5 107.9 MHz [U.K., Europe, Australia and China models] .......................................................................... 87.50 108.00 MHz AM [U.S.A., Canada and China models] ................................................................................. 530 1710 kHz [U.K., Europe and Australia models] ................................................................................. 531 1611 kHz

Sensitivity FM (IHF, MONO) [U.S.A., Canada and China models] ................................................................................................ 1.5 V [U.K., Europe and Australia models] ................................................................................................ 1.8 V AM .............................................................................................. -- V/m

CD player section D/A converter

.......................................................................................... S-bit DAC

Laser Diode Properties Material: GaAIAs Wavelength: 780 nm Emission duration: continuous Laser output: max. 44.6 W*

* This output is the value measured at a distance of about 200 mm from the objective lens surface on the Optical Pick-up Block.

Speaker section Type

..................................................... 2-way bass-reflex speaker system Magnetic shielding type

Driver ............................................................................ 10 cm cone woofer

2 cm dome tweeter Maximum input power

................................................................................................... 20 Impedance

.................................................................................................... 4 W Frequency response

............................................................................................ -- -- Hz Sensitivity

................................................................................... -- dB/2.83V/m

General Power supply

[U.S.A. and Canada models] ............................................................................... AC 120 V, 60 Hz [Australia model] ............................................................................... AC 240 V, 50 Hz [U.K. and Europe models] ............................................................................... AC 230 V, 50 Hz [China model] ............................................................................... AC 120 V, 60 Hz

Power consumption .................................................................................................. 35 W

In standby mode: 3.0 W Dimensions (W x H x D)

CRX-TS10/20 ............................................................................ 297 x 80 x 214 mm NX-TS10/15 .................................................................................... -- x -- x -- mm NX-TS20 .................................................................................... -- x -- x -- mm

Weight CRX-TS10/20 ................................................................................................... -- kg NX-TS10/15 ................................................................................................... -- kg NX-TS20 ................................................................................................... -- kg

Accessories ............................................................................ Remote control x 1

Battery (CR2025) x 1 Indoor FM antenna x1 AM loop antenna x 1

Speaker cable x 2 Stand x 3

Mounting bracket x 1 Non-slip pa

Manualsnet FAQs

If you want to find out how the TSX-10 Yamaha works, you can view and download the Yamaha TSX-10 Audio System Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Yamaha TSX-10 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Yamaha TSX-10. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha TSX-10 Audio System Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha TSX-10 Audio System Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha TSX-10 Audio System Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha TSX-10 Audio System Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha TSX-10 Audio System Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.