Summary of Content for Yamaha UD-USB01 Adaptor Owner's Manual PDF
This warranty is valid only within Japan. 6
FAX //// 03-5762-2125 ///// 06-6465-0367
143-0006 21-1 14A-5F FAX 03-5762-2125
554-0024 6 2-82 9F FAX 06-6465-0374 *
() *4 *
212 (W) x 132 (D) x 30 (H) mmUSB 0.3kg USB TO DEVICE
C.S.G., DMI Development Division
2008-2014 Yamaha Corporation
Published 01/2014 MWTO-B0
UD-USB01USB TO DEVICE
ELS-01/01C/01X ( )
USB Option Unit USB
Included items Owners Manual Screws (4 mm x 10 mm) x 4 Cord clamp
The screws are used for installing the UD-USB01 to the Electone.
The cord clamp is only for Japanese users.
For installation instructions, see the back of this document.
Installing this unit to the ELS-01/01C/01X The UD-USB01 can be installed to the bottom of the ELS series Electone by using four screws. Youll also need a Phillips
head (+) screwdriver.
CAUTION Make sure that the screwdriver head snugly fits the slots of the screw head. In particular, avoid applying excessive force
with an ill-fitting screw driver; doing so may strip the slots and damage the screws.
This Owners Manual describes two methods of installation to the Electone: installing only this unit, and installing both this
unit and the UD-FD01 oppy disk drive. For installation instructions, see the back of this document.
Precautions Before using the UD-USB01, be sure to read the Precautions and Precautions when using the USB TO DEVICE terminal
sections in the Owners Manual of your Electone.
Specications Dimensions: 212 (W) x 132 (D) x 30 (H) mm (Excluding the USB cable)
Weight: 0.3 kg
Connector: USB TO DEVICE terminal
(4 mm x 10 mm) x 4
ELS-01/01C UD-USB01 ELS Electone
UD-USB01 Electone USB TO DEVICE
212 x 132 x 30 mm USB
USB TO DEVICE
10:0018:00 10:0017:00 ()
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.
1: Method 1: Installing only this unit to the Electone
1 Insert but do not fully tighten one of the screws to the right front screw hole under the Electone.
A Hook this unit (with hole A, shown below) onto the installed screw.2
3 3 4
Insert and partially fix the remaining three screws. Then, firmly tighten all four screws.
USB USB TO DEVICE
Connect the USB cable to the USB TO DEVICE terminal.4 USB USB TO DEVICE
For Japanese users only
5 MIDI USB
USB /Connecting USB storage devices USB
While holding this button, pull the unit toward you.
USB USB TO DEVICE
USB TO DEVICE
When connecting a USB storage device to the USB TO DEVICE, make sure that the connector
on the device is appropriate and that it is connected in the proper direction.
During your performance, make sure to slide the USB unit under the keyboard. If you leave it in the
forward position, there is a danger of hitting it with your hand and breaking the USB device.
4 Follow step 4 in Method 1.
Temporarily install these two units together with screw A. Insert and partially x the
remaining three screws.
Then, rmly tighten all four
Then, align the four holes of
these two units.
Put this unit on top of the floppy disk drive as shown.
Remove the floppy disk drive from the Electone (if the floppy disk drive has already been installed.) The floppy disk drive can be removed by reversing the order of the installation instructions described in the Owners Manual of the Electone.
2: UD-FD01 Method 2: Installing both this unit and the UD-FD01 floppy disk drive to the Electone
2 UD-FD01 Electone
None of the included screws are necessary in this method.
Both this unit and the oppy disk drive are installed by using the screws for the oppy disk drive.
If you want to find out how the UD-USB01 Yamaha works, you can view and download the Yamaha UD-USB01 Adaptor Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for Yamaha UD-USB01 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a Yamaha UD-USB01. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Yamaha UD-USB01 Adaptor Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Yamaha UD-USB01 Adaptor Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Yamaha UD-USB01 Adaptor Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Yamaha UD-USB01 Adaptor Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha UD-USB01 Adaptor Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.