Contents

Yamaha UD-WL01 Adaptor Connection Manual PDF

1 of 6
1 of 6

Summary of Content for Yamaha UD-WL01 Adaptor Connection Manual PDF

The UD-WL01 USB Wireless LAN Adaptor allows you to easily establish a wireless connection between your instrument and your smart device, such as an iPhone, iPad, or iPod touch, or your computer. With this setting and the help of some specific applications, you can manage your music files more easily and take advantage of various functions expanding the potential of your instrument and making it even more integral part of your total music life.

NOTE In this manual, iPhone, iPad, and iPod touch are hereafter collectively called a smart device.

NOTE The UD-WL01 can be used with Yamaha products having wireless-LAN capability. For information on UD-WL01 compatible products, visit the UD-WL01 product page on the Yamaha website.

Setting up

1. Turn off the power to the instrument. Quit any open application software on your smart device/computer.

2. Connect the UD-WL01 to the [USB TO DEVICE] terminal of the instrument.

3. Turn on the power to the instrument.

When you are finished with the setup, go on to the next page, and connect your instrument to a network.

Required devices USB Wireless LAN Adaptor: UD-WL01

Access point with router (When your computer is using a modem with router capability, no router is required.)

NOTE When you set your instrument to Accesspoint mode for direct wireless connection between your instrument and your smart device/ computer, no access point is required (see Choosing the connection type on page 2).

Access point An access point refers to a device which acts as a base station when data is transmitted/received via a wireless LAN. Some access points are combined with router or modem functions.

USB Wireless LAN Adaptor: UD-WL01 Connection Manual

USB Wireless LAN Adaptor: UD-WL01 Connection Manual 2

Choosing the connection type

To connect your instrument to a network, you can use one of the four types of connections below. Select one which is most suitable for your network environment. For types (A) through (C), you need to set up an access point. If your access point supports WPS, choose type (A), which makes network connection easier.

Access point required: (A) Setting automatically by WPS; Do this when your access point supports WPS (see page 3). (B) Selecting from a network list; Do this when your access point does not support WPS (see page 4). (C) Setting manually; Do this when your access point does not support WPS, and also you cannot

find your access point on the instruments display (see page 4). Access point NOT required: (D) Using Accesspoint mode; Do this when you do not have an access point, or there is no access point

available nearby, such as when you are away from home (see page 5).

Connection types (A), (B), and (C) Infrastructure mode When you use type (A), (B), or (C), connection will be established via an access point.

Connection type (D) Accesspoint mode You can use your instrument as an access point to achieve a direct wireless connection between your instrument and your smart device/computer.

If you cannot find your access point on the instruments display, or when there is no access point nearby, select this type. Please note that when your instrument is set to Accesspoint mode, no Internet access is available on your smart device/computer, limiting part of their functions, such as mailing and searching.

WPS (Wi-Fi Protected Setup) WPS refers to a structure to easily make settings of a wireless LAN, just by pressing the WPS button of a wireless LAN adaptor and an access point. This helps you save time and effort in making all the settings necessary for connecting to a network.

UD-WL01

Access point

Wireless LANWireless LAN Computer

iPhone

iPad

UD-WL01 Wireless LAN

Computer

iPhone

iPad

USB Wireless LAN Adaptor: UD-WL01 Connection Manual 3

Connecting to a network

(A) Setting automatically by WPS When your access point supports WPS, you can easily connect your instrument to a network just by following the procedures below, without making any additional settings, such as entering a password.

NOTE To check whether your access point supports WPS, refer to the owners manual supplied with your access point.

1. Connect the UD-WL01 to the instrument, and then hold down the [WPS] button on the UD- WL01 for at least three seconds. The LED lamp on the UD-WL01 flashes every 0.5 seconds.

2. Press the WPS button on your access point within two minutes after step 1.

When the UD-WL01 is successfully connected to the access point, the LED lamp on the UD-WL01 lights, and then flashes during communication over the network.

Connection between the UD-WL01 and the access point is now established. Once your instrument is connected to your access point by WPS, the setting will be stored automatically to the instrument, and you no longer need to repeat the same setting next time. Once this is done, be sure to make the necessary settings on your smart device/computer (see page 6).

Infrastructure mode and Accesspoint mode The Infrastructure mode uses an access point for data communication, between a USB wireless LAN adaptor and a network. When you select connection type (A), (B), or (C) above, your instrument will be set to this mode. The Accesspoint mode allows you to directly connect a USB wireless LAN adaptor and your smart device/computer, without using an access point. With connection type (D) above, your instrument will use this mode.

LED lamp

[WPS] button

Press the WPS button on your access point

USB Wireless LAN Adaptor: UD-WL01 Connection Manual 4

(B) Selecting from a network list You can use a network list shown on your instruments display to select the network for connecting to your instrument. For details, refer to the Owners Manual or the Reference Manual for your instrument, since the operation and setting may vary depending on the instrument used.

1. Call up the wireless LAN display on your instrument, and then go to the network list.

Example: CLP-585/CLP-575/CLP-545/CLP-535

NOTE If no signal from a network is received, the network will not be listed. Also, no closed networks will be listed.

2. Connect the instrument to a network. The networks near your instrument will be listed on the display. From the networks listed, select the desired one. For a network with a lock icon ( ), you need to enter the password, and for a network without a lock icon, you can connect to the network just by selecting it.

Connection between the UD-WL01 and the access point is now established. Once this is done, be sure to make the necessary settings on your smart device/computer (see page 6).

(C) Setting manually If you cannot find a desired network on the instruments display, the network may be closed. In this case, you need to manually input the SSID, security setting, and password for connection. For details on how to input security information on the display, refer to the Owners Manual or the Reference Manual for your instrument.

NOTE For more information on how to check or change access point settings, refer to the owners manual supplied with your access point.

1. Call up the wireless LAN display, and then input the SSID, security setting, and password.

Example: CLP-585/CLP-575/CLP-545/CLP-535 System Menu > Utility > Wireless LAN > Select Network > Other

2. On the instruments display, touch the [Connect] button, or select an appropriate setting for connection.

Connection between the UD-WL01 and the access point is now established. Once this is done, be sure to make the necessary settings on your smart device/computer (see page 6).

System Menu display Utility display Wireless LAN display

USB Wireless LAN Adaptor: UD-WL01 Connection Manual 5

(D) Using Accesspoint mode You will use your instrument as an access point to achieve a direct wireless connection between your instrument and your smart device/computer.

NOTE Only an instrument which has the Accesspoint mode function can serve as an access point.

NOTE When your instrument is set to Accesspoint mode, no Internet access is available using a wireless LAN.

1. Call up the wireless LAN display on the instrument. For more information on how to call up the wireless LAN display, refer to the Owners Manual or the Reference Manual for your instrument.

2. Set the instrument to the Accesspoint mode. In the default setting, your instrument is set to Infrastructure mode. Select Accesspoint mode in the wireless LAN display.

Example: CLP-585/CLP-575/CLP-545/CLP-535 System Menu > Utility > Wireless LAN Option > Wireless LAN Mode

The LED lamp on the UD-WL01 lights up, when the instrument is set to Accesspoint mode.

3. If necessary, set the SSID, security, password, and channel. When you are using more than one instrument, set a different SSID and channel for each instrument to avoid interference.

4. Store the settings.

Now your instrument is available as an access point, enabling a direct wireless connection between your instrument and smart device/computer (see page 6).

Checking the IP and MAC addresses You can check the IP address of your instrument and the MAC address of the UD-WL01 on the instruments Wireless LAN display. For more information, refer to the Owners Manual or the Reference Manual for your particular instrument.

The MAC address is also shown at the back of the UD-WL01.

MAC address

USB Wireless LAN Adaptor: UD-WL01 Connection Manual 6

Setting your smart device/computer

For a smart device:

1. Call up the Wi-Fi display on your smart device by tapping Settings > Wi-Fi.

2. Turn on the Wi-Fi.

3. From the network list shown on the display, tap on the network to which you connected your instrument, or the instrument that you set to Accesspoint mode. If necessary, enter a password, and then connect.

For a computer: Set your computer to a wireless network connection. For details, refer to the owners manual supplied with your computer.

Connection to a desired network is now completed. Try using some applications on your smart device/computer to communicate with your instrument.

NOTE Some applications need a certain setting to communicate with the instrument. For details, refer to the relevant manuals for those applications.

The illustrations and screens as shown in this manual are for instructional purpo

Manualsnet FAQs

If you want to find out how the UD-WL01 Yamaha works, you can view and download the Yamaha UD-WL01 Adaptor Connection Manual on the Manualsnet website.

Yes, we have the Connection Manual for Yamaha UD-WL01 as well as other Yamaha manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Connection Manual should include all the details that are needed to use a Yamaha UD-WL01. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Yamaha UD-WL01 Adaptor Connection Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Yamaha UD-WL01 Adaptor Connection Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Yamaha UD-WL01 Adaptor Connection Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Yamaha UD-WL01 Adaptor Connection Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Yamaha UD-WL01 Adaptor Connection Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.