Xiaomi Yunbike C1 User Manual PDF

1 of 6
1 of 6

Summary of Content for Xiaomi Yunbike C1 User Manual PDF

Xiaomi Yunbike C 1 Accessories

Battery Charging device Pedals 2 Hex wrench Keys 2 Wrench

1. Wheel 2. Front sleeve 3. Fork 4. Front brake 5. Brake System 6. Headlights 7. Front steering cup 8. Wheel 9. Measuring panel 10. Right brake handle 11. Stem 12. Left brake handle 13. Saddle 14. Saddle pin

15. Battery 16. Power 17. Battery 18. Lock Battery 19. Socket 20. Pedal 21. Rear brake 22. Chain wheel 23. Chain 24. Motor 25. Footstep

XIAOMI-MI.COMXI AO

MI-M I.C

OM

Assembling and settings

1. Spinning front wheel clockwise by 180 degrees, confirm the right direction of motion (after the scroll wheel, press the front brakes). 2. Reduce the stem clamp bolt using a 5mm hex wrench (need to twist counterclockwise). Alternately, remove the front fork cartridge and other connecting elements. 3. First assemble front fork sleeve and place the into steering column. Take connecting elements of stern (logo side up) and connect with the sleeve, insert tensioner bolt.

4. Set a stem parallel with the front wheel, then tighten the tensioner bolt. 5. Set and secure the right and left pedals using the 5mm Allen key (on the pedals, you will see notation R / L, indicating the right and left foot).

Setting / Removing of battery

When installing battery in a special slot, follow the signs depicted direction, then you need to connect the battery to the socket. If you need to disassemble the battery, unplug it from the socket, turn key 90 degrees clockwise, remove the battery, pulling it up. After dismantling the battery, you can see the presence of USB port. Open the protective case and connect USB cable, you can charge your digital devices (5V / 1A).

Socket

port

Slot for battery installation

Express Install Mi YunBike C1 For more information, visit the website www.zhixingche.com

Video

XI AO

MI-M I.C

OM

Driving of the Bicycle

Press and hold the power button (more than 2 seconds), the system will give power then strengthening is possible.

When driving, keep the velocity faster than 4.2 km / h (usually this speed is reached after passage of two circles). Using the control panel (which is located on the right side), you can adjust the ride only by an electric motor, in which case you can not pedal. Turn off power of brake and gears, then switch to gain.

Measuring panel has an USB port to charge your phone (5V / 1A).

If after bike C1 be at rest for 20 minutes, it automatically turns off.

During braking better use the left rear brake handle;

Please choose roads, that are banned from entering self-propelled vehicles;

Timely check the battery level since riding, low charge could affect the lifespan of the battery. Use battery according to the conditions described in the instructions; When driving on long distances, you need to contact the pro shop to check the spokes and screws.

1. Level of gain; low, medium and high speed

2. Current speed

3. Run; ODO total mileage / TRIP single run

4. Mileage

5. Charge level of 4 blocks - 100-80% of charge; 3 blocks - 80-60% of charge; 2 blocks - 60-40% of charge; 1 unit - 40-20% of charge; 0 units - 20-0% of charge

6. Switch Gears

7. Gain -: Turn on: short press to decrease gain

8. Error Code: Hall sensor fault (1), switching of speeds fault (2) failure of the electric motor (3) protection of low pressure (4), protection against electric overload

(5), protection from blocking messages (6), problems powered brake system (7), failure data (8). If you find faults displayed wink appropriate designation

9. Gain + / Rear lights: Turn on: short press to increase the gain; long press to turn on backlight, repeated long press to turn off backlight

10. Bluetooth icon: when Bluetooth is connected, appropriate designation lits

11.USB icon: when connected to the USB port, the display shows the USB icon designation

XI AO

MI-M I.C

OM

Free warranty Terms

Note: The following are the conditions which can not be free warranty service.

A. Term of the warranty expired; B. The emergence of breakage, due to improper care and device settings, and as a result of using Mi YunBike C1 is not in accordance with instructions; C. Failure as a result of misuse, improper care or accident; D. Damage caused by self repair, alteration, dismantling, then the device does not meet its original state, or as a result of improper technical analysis and determination of fault; E. Improper use of original charger, which caused

problems of Mi YunBike C1 charging; F. You have not a valid document (current invoice) or a mismatch of data from the device; G. Malfunction through smoke, pharmaceuticals, chemicals, corrosion, water ingress, etc.; H. Malfunction of the electronic system bike through dampness, rain or snow; I. Damage incurred in a force majeure (including but not limited to - lightning, fire or flood); J. Natural breakdown / failure of parts that easily wear parts and consumables (fuses, light bulbs, brake pads, brake cables, spokes, tires, pedals, rubber plugs, plastic parts); K. Maintenance device in unauthorized service centers; L. After purchase you do not like the color, size vehicle.

Warranty

After-sales servicing is carried out according to the law on The rights of consumers of China and Law on product quality of China. In warranty service includes:

During the warranty period you have the right to repair, modify or return.

For repair, replacement or return of goods, you must have a receipt.

First, officials from the customer must examine the goods, identify existing problems and confirm its compliance with the terms of the warranty service.

Enable / disable the battery, rear lights, charging

Power button

System:

1. Press and hold the power button for more than 2 seconds, then turns indicator will light up 4. Every indicator points to a level of charge;

75-100% 4 LED1- lits; 50-75%, LED1 is off, LED2-4 lit; 25-50%, LED1, LED2 are off, LED3-4 lit; 0-25%, LED1, LED2, LED3 are off, LED4 lights;

2. One short press the power button - continuous flicker of 4 indicators; Press power button - 4 simultaneous flashing indicators; Press power button - all 4 lights on constantly; Press power button - repeat of three specified modes listed above indicators;

Turn off: under any circumstances, hold down the power button for 2 seconds to eliminate the vehicle; Charging: When the battery charge indicators are lit red when the battery is fully charged, green lights are flashing; Determining the level of charge the device while it is charging:

> 98%, lamp 4 lits; 75-98%, LED1 flickers, the other 3 indicator lit continuously; 50-75%, LED1 is off, LED2 blinking, LED3, LED4 is constantly lit; 20-50%, LED1, LED2 are off, LED3 flickers, LED4 is lit constantly; 0-20%, LED1, LED2, LED3 are off, LED4 flickers;XI

AO MI-M

I.C OM

List of faults

XI AO

MI-M I.C

OM

Specifications

Use of APP

1. Scan the QR-code or go to https://zhixingche. com/product/app, to download the Smart Bike RDA. 2. Start Smart Bike RDA application, select the appropriate bike home page. Click on the Bike C1 to access more information about the bike.

3. Click the button on the left side of the main page connecting the vehicle and enter the

Manualsnet FAQs

If you want to find out how the Yunbike Xiaomi works, you can view and download the Xiaomi Yunbike C1 User Manual on the Manualsnet website.

Yes, we have the User Manual for Xiaomi Yunbike as well as other Xiaomi manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Xiaomi Yunbike. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Xiaomi Yunbike C1 User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Xiaomi Yunbike C1 User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Xiaomi Yunbike C1 User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Xiaomi Yunbike C1 User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Xiaomi Yunbike C1 User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.