Contents

Xerox Creo CX700i Server User Guide PDF

1 of 16
1 of 16

Summary of Content for Xerox Creo CX700i Server User Guide PDF

Xerox 700 Digital Color Press

Image Shift/Corner Shift

Version 1.0 October 2009

2009 Xerox Corporation. All rights reserved. Xerox, Xerox Canada Ltd, Xerox Limited, and the sphere of connectivity design are trademarks of Xerox Corporation in the United States and/or other countries.

Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.

Xerox 700 Digital Color Press Image Shift/Corner Shift i

Table of contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Image Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Accessing the Image Shift feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Image Shift options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 No Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Auto Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Corner Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Margin Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Presets values (buttons) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Original Orientation and Mirror Side 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Original Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Mirror Side 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Table of contents Xerox 700 Digital Color Press

ii Image Shift/Corner Shift

Xerox 700 Digital Color Press Image Shift/Corner Shift 1

Overview

Image Shift The Image Shift feature is used with copy jobs. This feature allows you to move the image of your original so that it positions onto a desired area of the printed output page. This is especially useful when you need to leave a margin for binding (such as three-hole punch) without losing any information on the printed page.

The Image Shift feature consists of the following options:

No Shift Auto Center Corner Shift Margin Shift Three Preset values/buttons

Each of these options is discussed in the remainder of this document.

Accessing the Image Shift feature You can access the Image Shift feature from the machines User Interface (UI) by performing the following steps:

1. If necessary, select the All Services feature, and then select the Copy feature.

Overview Xerox 700 Digital Color Press

2 Image Shift/Corner Shift

2. From the main Copy screen, select the Layout Adjustment tab.

3. Select the Image Shift feature.

Xerox 700 Digital Color Press Overview

Image Shift/Corner Shift 3

The Image Shift option is displayed:

The No Shift option is the machine default setting for the Image Shift feature.

Image Shift options Xerox 700 Digital Color Press

4 Image Shift/Corner Shift

Image Shift options

No Shift If the No Shift option is selected, the machine assumes that the original document is registered in the upper left corner of the Document Glass. If the document is offset from this registration point, the image on the output copy will be offset by the same amount. No adjustment is made to your copies.

Xerox 700 Digital Color Press Image Shift options

Image Shift/Corner Shift 5

Auto Center The Auto Center option automatically places the scanned image in the center of the selected output paper size. The original should be smaller than the output paper, or the image should be reduced if the original is larger than the selected output paper.

In some cases, the original image center is shifted slightly on the output copy.

The orientation of the output image is determined by the placement of the original on the Document Glass and the orientation of the selected paper supply.

To use the Auto Center option, perform the following steps:

1. On the Image Shift window, select the Auto Center option. 2. Select the corresponding Up/Down/Left/Right button to adjust the image to the desired

adjustment. The image can be adjusted 0-2.0 in./0-50.8 mm Up/Down or Left/Right. 3. Select Save. 4. Select any additional copy options for your job. 5. When you are finished selecting options, press the Start button on the Control Panel.

Image Shift options Xerox 700 Digital Color Press

6 Image Shift/Corner Shift

Corner Shift The Corner Shift option enables you to move the image to each of the four corners of the paper or to the center of each of the four sides of the paper (eight positions total).

Note Corner shift may not be evident on your output if you copy your original at 100%.

The orientation of the image on the copies is determined by the placement of the document on the Document Glass and by the orientation of the select paper supply.

To use the Corner Shift option, perform the following steps:

1. On the Image Shift window, select the Corner Shift option. 2. Touch the arrow that corresponds to the location in which you would like to place the

image. 3. Select the corresponding Up/Down/Left/Right button to adjust the image to the desired

adjustment. The image can be adjusted 0-2.0 in./0-50.8 mm Up/Down or Left/Right. 4. Select Save. 5. Select any additional copy options for your job. 6. When you are finished selecting options, press the Start button on the Control Panel.

Xerox 700 Digital Color Press Image Shift options

Image Shift/Corner Shift 7

Margin Shift Use the Margin Shift option to create a margin for binding one edge of a document by shifting the image away from that edge.

The Margin Shift option enables you to center a document image, shift the image to one edge slightly, or move the image to a specified edge (0-2.0 in./0-50.8 mm Left/Right or Top/Bottom) of the output.

To use the Margin Shift option, perform the following steps:

1. On the Image Shift window, select the Margin Shift option. 2. Select the corresponding Up/Down/Left/Right button to adjust the image to the desired

adjustment. The image can be adjusted 0-2.0 in./0-50.8 mm Up/Down or Left/Right. 3. Select Save. 4. Select any additional copy options for your job. 5. When you are finished selecting options, press the Start button on the Control Panel.

Image Shift options Xerox 700 Digital Color Press

8 Image Shift/Corner Shift

Presets values (buttons) The Image Shift feature comes with three Preset options. The top two Preset options/buttons come with factory-loaded, default selections. Those default selections are Shift Right and Shift Left. The bottom button is set to (Not in Use) by default.

Note These Preset buttons can be changed in Tools by the System Administrator.

When one of these buttons is selected, they change the Shift settings which are displayed in the Shift area. Users can then adjust the Shift settings in a more unrestricted manner up/down/left/ right. The limit is the maximum dimension of the selected paper supply.

Xerox 700 Digital Color Press Image Shift options

Image Shift/Corner Shift 9

Original Orientation and Mirror Side 1

Original Orientation

Selecting the Original Orientation button launches the Original Orientation feature. If the Original Orientation feature is launched from the Image Shift feature, you can select your desired original orientation option. After the Save or Cancel button is selected, you are returned to the Image Shift feature.

Mirror Side 1

Selecting the Mirror Side 1 option places a check mark in the box, and when checked, automatically assigns Side 2 with the horizontal opposite of the Side 1 Image Shift options. When this option is selected, the Side 2 choices are displayed as unselectable (grayed out).

Image Shift options Xerox 700 Digital Color Press

10 Image Shift/Corner Shift

Manualsnet FAQs

If you want to find out how the Creo Xerox works, you can view and download the Xerox Creo CX700i Server User Guide on the Manualsnet website.

Yes, we have the User Guide for Xerox Creo as well as other Xerox manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Xerox Creo. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Xerox Creo CX700i Server User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Xerox Creo CX700i Server User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Xerox Creo CX700i Server User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Xerox Creo CX700i Server User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Xerox Creo CX700i Server User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.