Xerox DocuColor 5750 Server Starter Guide PDF

Pages 70
Year 1998
Language(s)
English en
1 of 70
1 of 70

Summary of Content for Xerox DocuColor 5750 Server Starter Guide PDF

Page 3

Adobe, the Adobe logo, Adobe Illustrator, PostScript, Adobe Photoshop, Adobe Separator, and Adobe PageMaker, are registered trademarks of Adobe Systems Incorporated, registered in certain jurisdictions... EPS (Encapsulated PostScript) is a trademark of Altsys Corporation... Apple, the Apple logo, AppleShare, AppleTalk, EtherTalk, LaserWriter, and Macintosh are registered trademarks, and MultiFinder is a trademark of Apple Computer, Inc... Microsoft, MS, MS-DOS, and Windows are registered trademarks of Microsoft in the US and other countries... QuarkXPress is a registered trademark of Quark, Inc... Times, Helvetica, and Palatino are trademarks of Linotype AG and/or its subsidiaries... ITC Avant Garde, ITC Bookman, ITC Zapf Chancery, and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation... Ethernet is a registered trademark of Xerox Corporation... Farallon, PhoneNET PC, and PhoneNET Talk are trademarks of Farallon Computing, Inc... COPS and COPSTalk are trademarks of CoOperative Printing Solutions, Inc... NetWare and Novell are registered trademarks and Internetwork Packet Exchange (IPX) is a trademark of Novell, Inc... SyQuest is a registered trademark, in the United States and certain other countries, of SyQuest Technology, Inc... UNIX is a registered trademark of UNIX System Laboratories, a wholly owned subsidiary of Novell, Inc... PANTONE is a registered trademark of Pantone, Inc...

Page 4

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules... These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment... This equipment generates, and uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications... Operation of this equipment in a residential area is likely to cause interference in which case the user will be required to correct the interference at his own expense...

Page 5

You acknowledge that the Software, Coded Font Programs, Typefaces, Trademarks and accompanying documentation are proprietary to Electronics for Imaging and its suppliers and that title and other intellectual property rights therein remain with Electronics for Imaging and its suppliers... Except as stated above, this Agreement does not grant you any right to patents, copyrights, trade secrets, trademarks (whether registered or unregistered), or any other rights, franchises or licenses in respect of the Software, Coded Font Programs, Typefaces, Trademarks or accompanying documentation... You may not adapt or use any trademark or trade name which is likely to be similar to or confusing with that of Electronics for Imaging or any of its suppliers or take any other action which impairs or reduces the trademark rights of Electronics for Imaging or its suppliers... The trademarks may only be used to identify printed output produced by the Coded Font Programs... At the reasonable request of Electronics for Imaging, you must supply samples of any Typeface identified with a trademark...

Page 6

IN NO EVENT WILL ELECTRONICS FOR IMAGING OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM THE USE OF THE SOFTWARE, CODED FONT PROGRAMS OR ACCOMPANYING DOCUMENTATION, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY... THIS LIMITATION WILL APPLY EVEN IF ELECTRONICS FOR IMAGING OR ANY AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE... YOU ACKNOWLEDGE THAT THE PRICE OF DOCUCOLOR XJ REFLECTS THIS ALLOCATION OF RISK... BECAUSE SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU...

Page 7

Installing user software on a Windows computer Installation overview 3

Page 9

This manual describes how to install the user software for the DocuColor Color Server and set up printing from Macintosh and Windows computers... For information on setting up network servers and clients to use the DocuColor, see the Administrator Guide... For general information on using the color copier, your computer, your application software, or your network, see the manuals that accompany those products...

Page 10

To print to the DocuColor from Windows, you need to use a PostScript printer driver and PostScript Printer Description (PPD) file... These drivers and PPD files are included with the User Software... Use the Adobe PostScript Printer Driver for Windows version 3... 0... 1 with Windows 3... 1x... Use version 4... 2 with Windows 95...

Page 11

To print from computers running Windows NT 3... 51 or 4... 0, you can use the PostScript driver delivered with the operating system, and the DocuColor PPD file provided with the User Software...

Page 12

Printer Files Printer description files for popular applications that require them in order for the DocuColor to appear in the applications Print and Page Setup dialog boxes... The DocuColor printer description files provide information about the DocuColor to applications and printer drivers...

Page 13

Verifying the network Verify that your system administrator has set up the network for IPX printing as described in the Administrator Guide... Printing from Macintosh computers is supported only for IPX networks...

Page 14

If you operate the DocuColor in a copy shop, quick print shop, or service bureau, you might want to provide copies of the printer driver, printer description files, and relevant documentation to customers... This ensures that jobs they create and print to files are properly formatted for printing to the DocuColor...

Page 15

If you will be using the utilities with Windows 95 or Windows NT 4... 0 over an IPX/SPX or TCP/IP network, configure the Chooser list... (This is sometimes done by your system administrator... )

Page 16

2... In the NT File Manager, double-click the icon for the CD-ROM to display its contents... If you have Windows 95, open the My Computer window and double-click the icon for the CD drive...

Page 17

7... Specify the name of the Program Folder in which to install the utilities, or click Next to use the default name...

Page 18

NOTE: The network protocol you choose here will become the default when you configure the utilities... If you choose TCP/IP (the default) and your network protocol is IPX/SPX, you need to do two things after the installation: delete the NET_WSCK... DLL file from the System folder in your active Windows folder, and re-install the utilities, this time choosing IPX/SPX in the Network dialog box...

Page 19

If you do not have a customized NET_WSCK... INI file, you can use the default file... If you use the default file, make sure that you configure the Chooser list before you try to use the utilities... See Configuring the Chooser list for Windows 95 and Windows NT 4... 0 on page 7 for instructions...

Page 20

If your network does not support DNS servers, edit the HOSTS file in your WINDOWS directory and insert an IP address for the DocuColor... (See your system documentation for information... ) Then go to page 11, To configure the Chooser list for TCP/IP networks: for TCP/IP instructions...

Page 21

The Server Name is indicated in the Server Setup section of the Configuration page... The server name is the name you entered for Server Name on the DocuColor Control Panel if you are using IPX/SPX (Windows 95)...

Page 22

6... When you have entered all the information, click Add...

Page 23

NOTE: Configuring the Chooser list also customizes the NET_WSCK... INI configuration file in your active Windows folder... This file is now ready to be copied to a floppy disk... You can insert the floppy disk containing the customized NET_WSCK... INI file when you install the utilities on other workstations that will be used for printing to the DocuColor (see step 10, page 7)...

Page 24

The server name is either the DNS name or the IP address for a DocuColor server when you are using TCP/IP with Windows NT... The Server Name is indicated in the Server Setup section of the Configuration page... The IP address is indicated in the Network Setup section of the Configuration page...

Page 25

4... When you have entered all the information, click Add...

Page 26

NOTE: Configuring the Chooser list also customizes the NET_WSCK... INI configuration file in your active Windows folder... This file is now ready to be copied to a floppy disk... You can insert the floppy disk containing the customized NET_WSCK... INI file when you install the utilities on other workstations that will be used for printing to the DocuColor (see step 10, page 7)...

Page 27

Setting up the DocuColor as a PostScript printer To set up the DocuColor as a PostScript printer, you need a PostScript printer driver and the appropriate DocuColor printer description files... Printer drivers and procedures vary across Windows versions... These sections also include some information about network setup...

Page 28

The Adobe PostScript Printers dialog box appears when Windows restarts... If you do not see it, double-click the Adobe PostScript Printers icon in the Windows Program Manager Control Panel...

Page 29

When you install a printer, Windows assigns it to a default printer port... If the DocuColor is connected to your computer through a network or you want to assign it to a different port, you need to change the port assignment... For information on which port to use, see your system administrator...

Page 30

To print to a file, select FILE... Printing to a file is useful if the DocuColor is off-site... However, if you select the FILE port, you cannot print to a printer until you select a network or printer port... (In some applications, you can select the FILE port from the Print dialog box; this is preferable for temporary use since it doesnt require resetting the port in the Control Panel... )

Page 31

If you are printing to a file, select FILE... Printing to a file is useful if the printer is elsewhere... However, if you select the FILE port, you cannot print to a printer until you select a network or printer port... If you select Network, the next window depends on the NetWare client driver version...

Page 32

Setting up printing with Windows 95 You can print to the printer from your Windows 95 workstation in several ways... First, you need to install the Adobe PostScript Printer Driver for Windows (included with the user software) and the printer description file (PPD) on your computer...

Page 33

The default setting for this option is 5 seconds, which is not adequate for spooling... Setting this option to 10 seconds ensures that spooling is not interrupted due to timeout... The Port Timeout in Seconds option is accessed from the Network Setup section of Setup... You can change this Setup option from the Control Panel or from the Command WorkStation... An Administrator password may be required to access Setup... For instructions, see the Administrator Guide...

Page 34

To access the BIOS settings, restart the computer and press the key indicated on your monitor as soon as the computer starts up... You may have to scroll through several screens to reach the parallel port settings... After setting the Parallel Port Mode to Compatible, save your changed setting and exit...

Page 35

The choice you make here depends on the action you took in step 2 of To prepare the DocuColor and your computer for parallel port printing: on page 21... If you set the port timeout in Setup to 10 seconds, you can select either option, but spooling will be faster... If you left the port timeout at its default, select Print directly to the printer...

Page 36

NOTE: You need to perform the following procedure only if the LPT 1 port is not currently set to Printer Port...

Page 37

4... Double-click Ports and then double-click the LPT1 port...

Page 38

5... In the LPT1 port Properties dialog box, click the Driver tab and then click Change Driver...

Page 39

If you are printing through a Novell server, before you begin, the Novell network and file server should be set up... The file server should be configured with a print server and print queue for the printer... For details see your NetWare documentation and the Administrator Guide...

Page 40

NOTE: You must enable TCP/IP printing to ensure that all files required for IPX/SPX will be installed... You can select it and click Remove after you set up IPX/SPX if you do not need to use the TCP/IP protocol...

Page 41

6... In the Property list, click Frame Type and select the Frame Type that corresponds to the one set during DocuColor Control Panel Setup...

Page 42

Check with your network administrator to determine whether this type of connection is appropriate for your network environment... You might need to specify additional settings... For example, if your computer and the DocuColor are on different subnets, you might need to enable WINS resolution and specify a WINS Name Server...

Page 43

To set up printing to a second queue, you must install a new printer for each queue and repeat the following procedures... Give each printer a descriptive name during printer driver installation, such as Astro-Print or Astro-Direct, so you can easily identify printers...

Page 44

The printer name you are browsing for is the WINS Name Server... Refer to the Configuration page for this information...

Page 45

If your administrator has set up the DocuColor on an NT server and shared it, you may not have to enter all the information described in this section... Any windows that are not necessary will not appear, and you can verify information that appears in other windows instead of typing in new information... For information about setting up and printing to the DocuColor with a Windows NT server, see the Administrator Guide...

Page 46

If you have not already installed a PostScript printer, you will be prompted to insert your Windows NT system software CD or floppy disks... In that case, if the CD-ROM drive with your system CD is the d: drive, type the path:

Page 47

6... Enter a name for the DocuColor in the Printer Name box in the Create Printer dialog box, and then click OK...

Page 48

The printer is ready to accept parallel print jobs from your computer, using the Windows NT PostScript printer driver and the copier printer description file... When you select Print, your PostScript files will be transmitted over the parallel port connection to the Print queue... The network administrator should verify the parallel port connection by printing a simple document to LPT1, the designated port...

Page 49

This option is available if you installed TCP/IP with the LPR printing protocol when you installed Windows NT... See your Windows NT documentation for information...

Page 50

Setting up printing with Windows NT 4... 0 Before you can set up PostScript printing for Windows NT 4... 0, you need to install the Windows NT PostScript printer driver... The following procedures describe how to install the PostScript Printer Description file (PPD) for your printer and how to configure printing for your network type... The printer files provided on the User Software CD support the Intel version of Windows NT...

Page 51

My Computer is available if you logged in to a computer on which you have Administrator privileges... If it is not available, you can add a network printer... The procedure is similar to adding a port (see page 45)...

Page 52

8... In the Locate File dialog box, browse to the ENGLISH\PRNTDRV\WIN_NT4X folder and click Open...

Page 53

11... Enter a name for the DocuColor, or leave the default name, and choose whether you want the DocuColor to be your default printer... Click Next...

Page 54

If this is the first PostScript printer installed on your system, you may need to eject the User Software CD and insert the Windows NT Installation CD to locate a PSCRIPT... DLL file... The path on the Windows CD is \i386...

Page 55

Select the operating system or systems used by your network clients if you want to install a printer driver that those clients can download...

Page 56

Before you continue, ask the system administrator for the IP address assigned to the DocuColor, as well as the subnet mask and the gateway address, if they are used...

Page 57

If the LPR port is not listed, install the TCP/IP protocols... See the Administrator Guide or your Windows NT documentation...

Page 58

If your network uses Domain Name Services (DNS), enter the DNS name assigned to the DocuColor instead of the IP address...

Page 59

Configure the Novell network and file server for handling DocuColor print jobs... The file server should be configured with a print server and print connection for the DocuColor... For details, see your NetWare documentation...

Page 60

If the NetWare server does not have a suitable driver for the DocuColor you may be asked if you want to set up the printer on your workstation...

Page 61

The DocuColor polls the NetWare server for print jobs in the print connection defined for the DocuColor... When you print, your PostScript files are spooled to that connection and transmitted over the queue port to the DocuColor...

Page 63

Setting up the WebTools In order for network users to access and use the WebTools, you need to set options in Network Setup and Printer Setup on the DocuColor Control Panel... You also need to prepare each users workstation to communicate with the DocuColor over the Internet or intranet...

Page 64

Using the WebTools Installer The WebTools Installer provides the same printer driver installer as found on the User Software CD, allowing you to easily download the current version of the printer driver from the DocuColor to your workstation...

Page 65

For Mac OS computers, a folder named Printer Driver is downloaded to the desktop in a BinHex-encoded, compressed format... If your internet browser is equipped with an expander utility such as StuffIt Expander, the folder will be decoded and decompressed automatically...

Page 67

Installing Adobe PostScript Printer Driver If you are re-installing the Adobe PostScript Printer Driver, you must delete any previous versions and related files from DOS before you can successfully install the driver... See the Adobe README file included with the Printer Driver for instructions...

Page 68

Open the NET_WSCK... INI file with a text editor and make sure that it is customized correctly for your site...

Page 69

Macintosh Chooser 2 Windows 3... 1x by IPX (Novell) 18 Windows 3... 1x by parallel port 18 Windows 95 by IPX 28 Windows 95 by parallel port 24 Windows 95 by Windows printing 30 Windows NT 3... 51 by parallel port 36 Windows NT 3... 51 by TCP/IP 37 Windows NT 4... 0 by parallel port 43 Windows NT 4... 0 by TCP/IP 44

Page 70

Windows 95 Adobe PostScript printer driver 21 connecting to parallel port 24 connecting via Windows printing 30 installing utilities 4 IPX/SPX 28

Manualsnet FAQs

If you want to find out how the DocuColor 5750 Xerox works, you can view and download the Xerox DocuColor 5750 Server Starter Guide on the Manualsnet website.

Yes, we have the Starter Guide for Xerox DocuColor 5750 as well as other Xerox manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Starter Guide should include all the details that are needed to use a Xerox DocuColor 5750. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Xerox DocuColor 5750 Server Starter Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Xerox DocuColor 5750 Server Starter Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Xerox DocuColor 5750 Server Starter Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Xerox DocuColor 5750 Server Starter Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Xerox DocuColor 5750 Server Starter Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.