Contents

Xerox Fiery EX12 Server Quick Start Guide PDF

1 of 8
1 of 8

Summary of Content for Xerox Fiery EX12 Server Quick Start Guide PDF

QUICK START GUIDE

This Quick Start Guide provides system requirements and an overview of how to set up your Fiery EX12/EX2000d Color Server so you can begin printing. The guide describes the initial tasks you must perform and points you to sections in the user documentation where the procedures are described in detail. A full set of user documentation is provided on the User Documentation CD. A brief description of the user manuals and how to print them follows.

Media pack Your Fiery media pack should contain the following:

User Software CD

System Software CD(s) (for service use only)

Back-up/Restore Utility CD (for service use only)

User Documentation CD

Printed Quick Start Guide

Printed Customer Release Notes

Kodak Gray Scale

About the documentation Along with the printed Customer Release Notes included in the Media Pack, documentation is provided in electronic form on the User Documentation CD. The documents are provided as Acrobat PDF (Portable Document Format) les, which are linked and cross- referenced. A description of the documentation follows:

The Quick Start Guide summarizes the steps for conguring the Fiery and setting up printing. It also describes how to access the online documentation.

The Conguration Guide explains basic conguration and administration of the Fiery for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0, and Novell NetWare servers to provide printing services to users.

The User Software Installation Guide describes installation of printer drivers and other software from the User Software CD to enable users to print to the Fiery.

The Printing Guide describes the printing features of the Fiery for users who send jobs from their computers.

The Color Guide provides information on managing the color output of the Fiery. It explains how to calibrate your copier and take advantage of the ColorWise color management system, as well as features in ColorWise Pro Tools.

Part Number: 450256942002 Electronics For Imaging, Inc.

2 Quick Start Guide

The Fiery Color Reference addresses concepts and issues associated with managing color output of the Fiery and outlines key workow scenarios. In addition, it offers information on printing from popular Microsoft Windows and Apple Mac OS applications.

The Job Management Guide explains the functions of the Fiery client utilities, including EFI Command WorkStation and Fiery DocBuilder Pro, and how you can use them to manage jobs and maintain color quality. This manual is intended for an operator or administrator, or a user with the necessary access privileges, who needs to monitor and manage job ow, perform color calibration, and troubleshoot problems that may arise.

Customer Release Notes provide last-minute product information and workarounds for some of the problems you may encounter.

Printing the manuals The PDF les on the User Documentation CD include blank pages to allow for correct pagination with duplex printing. The CD also includes an installer for the Adobe Acrobat reader, an application that allows you to view and print the user documentation from a Windows or Mac OS computer. If your system includes Acrobat Reader version 3.0 or later, you can view and print these documents directly from the User Documentation CD. If not, install the version of Acrobat Reader provided on the User Documentation CD.

TO INSTALL ACROBAT READER ON A MAC OS OR WINDOWS COMPUTER

1. Insert the User Documentation CD into the CD-ROM drive of your computer.

2. Double-click the CD icon to open the Documentation folder.

3. For Macintosh: Open the Acrobat Reader 4.0 folder, and then open the Mac folder. Double-click Reader Installer.

For Windows 9x/Me/NT/2000/XP: Open the Acrobat Reader 4.0 folder, and then open the Windows folder. Double-click ar405eng.exe.

When installation is complete, you can view, print, and search the following les: Conguration Guide, User Software Installation Guide, Printing Guide, Job Management Guide, Color Guide, and Fiery Color Reference.

NOTE: To access the online documentation, you must place all book les in a folder called English on your desktop.

Part Number: 45025694

3 System requirements

System requirements To install the Fiery user software on a Windows or Mac OS computer, the computer must be equipped with a built-in or external CD-ROM drive. The following table lists the minimum system requirements.

Minimum requirements for Windows 9x/Me Windows NT Windows 2000/XP Mac OS

Computer Windows-based computer with an 80486, AMD, or Pentium processor

Mac OS computer

Operating System Windows 9x/Me Windows NT with NT Service Pack 6

Windows 2000/XP Mac OS 8.6 to 9.1

Memory for printing and Fiery utilities (Fiery Downloader

and ColorWise Pro Tools)

8MB of RAM for printing

32MB of RAM for utilities

32MB of RAM for printing

64MB of RAM for utilities

Networking protocol IPX/SPX or TCP/IP IPX/SPX, TCP/IP, or AppleTalk AppleTalk

PostScript printer driver Adobe PostScript Printer Driver for Windows (included with user software)

Adobe PostScript Printer Driver for Windows NT (included with user software)

Microsoft PostScript Printer Driver for Windows 2000/XP (included with Windows 2000/XP operating system)

Adobe PostScript Printer Driver (included with user software)

Fiery Scan Adobe Photoshop version 4.0 or later

Fiery WebTools Java-enabled web browser: Either Netscape Communicator v4.5 or Internet Explorer v4.0.1

NOTE: Netscape and Microsoft release frequent updates to their browsers. As support cannot be guaranteed for all versions, use the versions specied above for best results.

A monitor and video memory that supports 16-bit color at a minimum resolution of 800x600

A TCP/IP-enabled network and the IP address or DNS name of the Fiery Web Services enabled on the Fiery

Command WorkStation

(Windows only)

Windows-based computer with a 200MHz Pentium processor 60MB of available hard disk drive 2x CD-ROM drive 17" monitor that supports 16-bit color at a minimum resolution of

1024x768 64MB of RAM Video adapter card with 2MB of video memory TCP/IP networking protocol installed

Doc Builder Pro on Command WorkStation (Windows only)

In addition to requirements for Command WorkStation: Windows-based computer with 333MHz Pentium processor 90MB of available hard disk space

Part Number: 45025694

4 Quick Start Guide

Preparing to print To set up your Fiery, you must perform the following tasks:

Connect the Fiery physically to a functioning network.

Congure the network server.

Set up the Fiery from the Control Panel.

Prepare client workstations for printing.

A brief explanation of each task follows.

Connecting the Fiery to a functioning network NOTE: When you add the Fiery to a network, it is assumed that a network administrator has already installed a network cabling system and has connected workstations and servers. For examples of different networks, see the Conguration Guide.

Prepare a network node for the Fiery.

Route the cable to a location near the copier where the Fiery will be installed and attach the cable to the network interface of the Fiery.

For more information, see Chapter 1 of the Conguration Guide.

Connect the Fiery to the copier and print a test page.

For detailed instructions, see the Conguration Guide.

TO PREPARE FOR FIERY CONFIGURATION

1. Print a copier test page to verify the copier is functioning normally.

2. Turn off the copier and connect the interface cable from the copier to the Fiery.

3. To conrm this connection, turn on the copier and the Fiery and print a Test Page from the Fiery Control Panel.

To print a Test Page, press the Menu button on the Control Panel to access the Functions menu. Choose Print Pages, and then choose Test Page.

4. With both the copier and the Fiery turned off, connect the network cable to the Fiery.

The network should already be installed and operational.

5. Turn on the copier and then the Fiery.

Other Network Requirements

UNIX (TCP/IP) workstation Standard TCP/IP connectivity (for example, Sun SPARCStation or Silicon Graphics workstation with Solaris version 2.5 or later or SunOS version 4.1.x software)

TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)

IPX (Novell) network Novell server Novell NetWare software version 3.x, 4.x, or 5.x Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types

Part Number: 45025694

5 Preparing to print

Conguring the network server If you require a network server, you must congure that server to provide client access to the Fiery as a color printer. To congure a network server in a Windows or UNIX network environment, see the Conguration Guide. For Token Ring, Novell, and Windows NT (using TCP/IP) networks, the network servers must be congured for printing to the Fiery before you congure Fiery network settings in Setup. For more information, see the Conguration Guide.

Setting up the Fiery from the Control Panel Setup congures the Fiery to communicate with other devices and manage print jobs. You must perform Setup the rst time you turn on the Fiery after new system software is loaded or any time Server software is reinstalled. Initial Setup must be performed at the Fiery Control Panel.

Perform the following Setup options in the order listed:

Server Setupspecies system options.

Network Setupspecies all the active network systems that transmit print jobs to the Fiery.

Printer Setupspecies how print jobs and queues are managed.

NOTE: This is the minimum setup required to enable your Fiery to begin printing. To congure network settings in Setup, you need a live network connection so the Fiery can query the network for zones, servers, and server-based queues.

To perform Setup from the Control Panel, select one menu after another and enter information about your Fiery and your network and printing environment. In each Setup screen, the last line of the display shows the name of the current Setup menu. Most of the menus you see are displayed on the Control Panel Map, a ow chart you can print from the Control Panel.

TO PRINT THE CONTROL PANEL MAP

1. At the Control Panel, press the Menu button to access the Functions menu.

2. Press the line selection button for Print Pages.

The Control Panel displays the rst four types of pages you can print. To see the remaining types of pages, press the Down arrow button.

3. Press the line selection button for Control Panel Map.

NOTE: The other pages you can print from the Control Panel include the Conguration page, Test Page, Font List, Job Log, and color charts. Print the Conguration page after you have nished running Setup to conrm your settings.

For an introduction to Fiery Setup and detailed instructions on setting up the Fiery from the Control Panel or a Windows computer, see the Conguration Guide.

Part Number: 45025694

6 Quick Start Guide

Preparing client workstations for printing Before you can print to the Fiery, you must install the appropriate printer les from the User Software CD and connect the client to the Fiery over the network. The software provided on the User Software CD is described in the User Software Installation Guide.

NOTE: The steps to set up printing vary slightly for Windows and Mac OS computers.

Windows computers

For all Windows operating systems supported (including Windows 9x/Me and Windows NT/2000/XP), the minimum steps for setting up printing are as follows:

Install the printer drivers and corresponding printer driver les.

Congure installable print options.

Congure the print connection between the client and the Fiery.

For details, see the User Software Installation Guide. It also contains instructions for the following:

Installing Fiery utilities

Conguring the connection for Fiery utilities

Copying additional les from the User Software CD as required

Mac OS computers

To set up printing on a Mac OS computer, perform the following steps:

Install the printer driver and PPD les.

Set up the Fiery in the Chooser.

For details, see the User Software Installation Guide. It also contains instructions for the following:

Installing Fiery utilities

Installing printer and screen fonts

Conguring the connection for Fiery utilities

Copying additional les from the User Software CD as required

Safety warnings The Fiery display window is a liquid crystal display (LCD) that is made of glass and can break. Do not subject it to strong shocks.

If the display window breaks and the liquid crystal material leaks out, do not inhale, ingest, or touch it. If the material gets on your skin or clothing, wash it off with soap and water immediately.

Do not touch or put pressure on the panel. This will change the color of the panel.

Part Number: 45025694

7 Cleaning the Fiery display window

Cleaning the Fiery display window Clean the Fiery with a soft cloth moistened with isopropyl alcohol or ethyl alcohol. Never use water or ketone as these may permanently alter the display.

Summary of Fiery network installation

At each workstation that will print to the Fiery:

Install the appropriate printer les and connect to one or more queues.

For computers that will use them, install Fiery utilities and an Internet browser.

Verify the Fiery in the list of printers and run a test print.

Fiery available on the network

Network server

UNIX Mac OS Windows

Fiery

Fiery Prepare a network node. Connect the Fiery to the copier and the network.

Congure UNIX, Windows NT 4.0, and IPX (Novell) servers to specify Fiery print queues and Fiery users.

No special conguration of AppleShare servers is required.

On the Fiery Contr

Manualsnet FAQs

If you want to find out how the Fiery EX12 Xerox works, you can view and download the Xerox Fiery EX12 Server Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Xerox Fiery EX12 as well as other Xerox manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Xerox Fiery EX12. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Xerox Fiery EX12 Server Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Xerox Fiery EX12 Server Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Xerox Fiery EX12 Server Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Xerox Fiery EX12 Server Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Xerox Fiery EX12 Server Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.