Xerox DocuPrint N32 Printer Instruction Manual PDF

Download download
Xerox DocuPrint N32 Printer Instruction Manual PDF
Xerox Manual Xerox Printer Manual Xerox DocuPrint N32 Manual Xerox Printer Instruction Manual
Pages 15
Year 1999
Language(s)
English en
1 of 15
1 of 15

Summary of Content for Xerox DocuPrint N32 Printer Instruction Manual PDF

Page 1

Version 1.8 2/4/99 1

Xerox DocuPrint N24/N32/N40

Instructions

for

Controller Software Upgrades

Page 2

Version 1.8 2/4/99 2

Table of Contents

Printer Controller Software Upgrades .................................................................................................2 Before you upgrade ................................................................................................................................3 Upgrade Methods....................................................................................................................................4 Printer Controller Upgrade Process ....................................................................................................4 Determining a Successful Upgrade........................................................................................................5 Upgrade Procedure.................................................................................................................................6 General Troubleshooting ....................................................................................................................13

Page 3

Version 1.8 2/4/99 3

Printer Controller Software Upgrades:

The Printer Controller is FLASH ROM equipped. This means as software fixes and upgrades are available, you are able to update printer software without generating a service call.

The following options are available for software updates:

Option 1

The printer controller software is provided on the product CD-ROM. The path to the software on your CD-ROM is

\INSTAL\UTILITIES\FIRMWARE\(version #).xfc

Option 2

The printer controller software can also be downloaded from the following Web sites:

http://xerox.network printers.com/products/N24

http://xerox.networkprinters.com/products/N32

http://xerox.networkprinters.com/products/N40

Option 3

You may also contact your local customer support for help if necessary.

Page 4

Version 1.8 2/4/99 4

Before you upgrade: Be sure the printer is in communication with the workstation or PC via parallel port or over the network.

If the Token Ring option is installed on your printer, be sure to disconnect the cable to the Token Ring card prior to downloading the controller software via the parallel port.

PRINT A CONFIGURATION SHEET The Configuration sheet provides a record of the critical parameters set for your printer as well as the software versions.

Follow these steps to print a Configuration sheet:

1. Press the 1 button until <Print Menu> is displayed.

2. Press the 2 buttonuntil is displayed.

3. Press the 4 button.

4. At this point the Configuration sheet will print.

Page 5

Version 1.8 2/4/99 5

Upgrade Methods: Select a method from the chart to do an upgrade for your operating system. The bold letter indicates the upgrade procedure to use.

Operating System

CentreWare DP LPR Parallel Port

Novell NetWare

Macintosh Printer Utility

CentreWare Internet Services

Win 3.x A *** C D * F

Win 95 A *** C D * F

NT 3.51 & 4.0 A B ** C D * F

OS/2 * B ** C D * F

UNIX * B * * * F

Macintosh * * * * E F

* - Not Applicable

** - Requires TCP/IP services to be installed from your operating system.

*** - Requires LPR capable software to be installed independently from the operating system.

Printer Controller Upgrade Process During the upgrade process the printers Control Panel will display Downloading Please Wait. After the complete file has been received, the Control Panel will display Download Passed.Please Reboot.

NOTE: It is important to not interrupt any part of the process. DO NOT TURN OFF THE PRINTER IN THE MIDDLE OF AN UPGRADE.

If you experience any problems, call your Xerox Customer Support Center.

Page 6

Version 1.8 2/4/99 6

Determining a Successful Upgrade: If your upgrade is successful, the Control Panel display will show Download Passed Please Reboot for a few seconds and then will automatically reboot unless you upgraded the printer via the parallel port while pressing the button 1 and button 5 simultaneously, in which case the message will remain and the printer needs to be powered OFF and then ON to reboot. To confirm the software version, print a Configuration sheet.

If the Token Ring option is installed on your printer, please be sure to reconnect the cable to the option card prior to rebooting the printer via the power OFF and ON procedure.

Page 7

Version 1.8 2/4/99 7

Upgrade Procedures:

PROCEDURE A UPGRADE FROM CENTREWARE DP

Warning: Once the upgrade process has begun DO NOT Power off your Printer!

1. Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you Upgrade

2. Start the CentreWare DP software from your workstation. Select the printer from the Printers List.

3. At the CentreWare DP main screen select the Tools menu.

4. From the Tools menu select the Upgrade Printer item.

5. The Upgrade Printer prompt will appear warning that this process may take several minutes click OK if you wish to continue.

6. Enter the path of the upgrade file and click OK.

7. CentreWare DP will send the upgrade file to the printer. The upgrade should take less than 10 minutes to perform.

8. To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade. For problems, consult the section labeled General Troubleshooting.

Warning: If the download was not successful, upgrade via the parallel port!

Page 8

Version 1.8 2/4/99 8

PROCEDURE B LPR UPGRADE PROCEDURE

Warning: Once the upgrade process has begun DO NOT Power off your Printer!

1. Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you Upgrade.

2. Send the upgrade file to the printer. Use the format based on your client operating system:

WINDOWS NT (3.51 & 4.)

lpr -S -PRAW [RETURN]

OS/2

lpr -p ps -s [RETURN]

UNIX (use lp or lpr as appropriate)

lpr [RETURN] lp [RETURN]

Where: = the TCP/IP address the printer has been

assigned = the path and name of the upgrade file = the native queue to which the printer is assigned = use switches as appropriate to your UNIX environment. Remember switches are case sensitive.

3. To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade.

IF YOU HAVE PROBLEMS: Try to ping the printer to make sure it has a valid ip address

In addition, consult the section labeled General Troubleshooting

Warning: If the download was not successful, upgrade via the parallel port!

Page 9

Version 1.8 2/4/99 9

PROCEDURE C THE PARALLEL PORT

Warning: Once the upgrade process has begun, DO NOT power off your printer!

1. Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you Upgrade.

2. If your Xerox DocuPrint N24/N32/N40 printers User Interface displays Ready go to step 3. If a previous download attempt was not successful and your printer is not Ready, power the printer Off then "ON" while pressing button 1 and button 5 simultaneously. Continue pressing these two keys until the User Interface displays:

"Entering... Download Mode"

3. To send the upgrade file to the printer:

An OS/2 user should open a command prompt.

A Windows (95/NT/3.1x) user should run from DOS or run a DOS session. For speed, it is recommended to exit Windows 3.1x and run from DOS.

The format for the mode command is as follows:

mode :,,p [RETURN] (two commas following the colon)Note: This format is not valid under Windows NT.

The format for the copy command is as follows:

copy [RETURN]

Where:

</b> = binary file

= the parallel port to which the printer is connected (LPT1:, LPT2:, etc.)

= the path and name of the upgrade file

Ex: copy /b LPT1:

4. Wait until User Interface displays "Download Passed Please Reboot"

Page 10

Version 1.8 2/4/99 10

5. Power "OFF" then "ON" the Xerox DocuPrint N24/N32/N40 laser printer. The User Interface should display "Ready".

6. To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade.

IF YOU HAVE PROBLEMS: Make sure you are using an IEEE 1284 compliant cable. Make sure the printers parallel port time-out is set to Infinite Retry

(e.g. mode lpt1:,,p) If running a DOS window from Windows 95, make sure that one of

your printers through Settings/Printers is mapped directly to LPT1 (not re-directed to a network queue). Also check the port settings by selecting the Port Settings button on the Details tab dialog. Make sure the selection Spool MS-DOS Print Jobs is selected. If still having problems after making these settings, try powering your PC off and on.

Windows 3.1x or 95 users: if experiencing time-outs on the host PC ("Problem detected on parallel port, Abort, Retry, Fail") then you need to set the port to an infinite time-out against busy on the printer. From the command line, or as an entry in autoexec.bat, type the following command:

mode :,,p (two commas following the colon)

The "p" option sets the port for infinite time-out. After setting the port to an infinite time-out, try using the copy command again. If the command prompt does not appear within 20 minutes, a ctrl-break can be used to abort the copy command without rebooting your computer.

Windows 3.11 users should turn off Print Manager. If the Token Ring option is installed on your printer, be sure to

disconnect the cable to the Token Ring card prior to downloading the controller software via the parallel port and be sure to reconnect the cable to the option card prior to rebooting the printer via the power OFF and ON procedure.

In addition, consult the section labeled General Troubleshooting

Page 11

Version 1.8 2/4/99 11

PROCEDURE D UPGRADE VIA NOVELL NETWARE QUEUE

Warning: Once the upgrade process has begun DO NOT Power off your Printer!

1. Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you Upgrade

2. Submit the upgrade file to the printer queue using your normal Novell NetWare print procedure. Send the file directly, do not use a print driver or an application.

3. The upgrade should take about 10 minutes to perform.

4. To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade.

IF YOU HAVE PROBLEMS: If the printer never goes to Downloading check the status of the job in the queue. If the job is in the queue and Active, but not being sent to the printer, power the printer off and then on. See if the job is then sent to the printer.

In addition, consult the section labeled General Troubleshooting.

Warning: If the download was not successful, upgrade via the parallel port!

Page 12

Version 1.8 2/4/99 12

PROCEDURE E MACINTOSH XEROX PRINTER UTILITY

Warning: Once the upgrade process has begun DO NOT Power off your Printer!

1. Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you Upgrade.

2. Launch the Xerox Printer Utility

3. Select the N24, N32 OR N40 printer to upgrade in PostScript Printers list.

4. Select Send File.

5. Locate the upgrade file.

6. Select Open to send the upgrade file to the printer.

7. The Xerox Printer Utility will send the upgrade file to the printer. The upgrade should take about 10 minutes.

8. To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade. For problems, consult the section labeled General Troubleshooting.

Warning: If the download was not successful, upgrade via the parallel port!

Page 13

Version 1.8 2/4/99 13

PROCEDURE F UPGRADE PROCEDURE VIA CENTREWARE INTERNET SERVICES

Warning: Once the upgrade process has begun, DO NOT power off your printer!

1. Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you Upgrade.

2. Launch your web browser and connect to the printer URL (typically http://ipaddress)

3. Select the Print page to get to the File Download dialog.

4. In the File: box enter the path and name of the upgrade file, or select the Browse.. button to select the upgrade file.

5. Select the Start button.

6. The upgrade file will be sent to the printer. The upgrade should take less than 10 minutes to perform.

7. To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade.

IF YOU HAVE PROBLEMS:

If having problems with time-outs when sending the file using a proxy server, try turning off the proxy server and sending the file again. Alternatively, the printer IP address can be entered individually as an address, for which a proxy should not be used.

Check your browser version to be sure your are using the correct version. The upgrade procedure requires Netscape 3.0 or later or Internet Explorer 4.0 or later

Try to ping the printer to make sure it is a valid ip address

In addition, consult the section labeled General Troubleshooting.

Warning: If the download was not successful, upgrade via the parallel port!

Page 14

Version 1.8 2/4/99 14

General Troubleshooting Some of the individual printer upgrade methods will have their own trouble shooting sections. This section is to address general problems.

PRINTER CONTOLLER UPGRADE: If the printer controller upgrade has failed, you will not receive an error page. Check the following and try the upgrade again:

1. Make sure you are using the correct upgrade file for your printer controller.

2. Check your method of connectivity to your printer. Can you successfully send a job over your chosen method of connectivity? For parallel port users: Are you using an IEEE 1284 compliant parallel cable?

3. If the flash software was downloaded from a ftp site, make sure it was downloaded in binary format, not ASCII. To change to binary format, type binary at any ftp prompt. If you are using a ftp software package such as Chameleon ftp, you can select binary from within the software.

4. Consult your upgrade procedure to see if there is a If you have problems section in your chosen upgrade procedure.

5. If the printer never goes to Downloading Please Wait and stays Ready, check your method of printer connection. Try powering off and on. If sending via a NetWare queue, check the status of the job in the queue. Powering off and on the printer may cause the job to be sent to the printer.

6. If you are network connected and the download has failed, you must connect via parallel port (i.e. see Procedure C).

7. If the Token Ring option is installed on your printer, be sure to disconnect the cable to the Token Ring card prior to downloading the controller software via the parallel port and be sure to reconnect the cable to the option card prior to rebooting the printer via the power OFF and ON procedure.

8. If all attempts to upgrade the printer controller have failed, contact your support center for assistance.

Manualsnet FAQs

If you want to find out how the DocuPrint N32 Xerox works, you can view and download the Xerox DocuPrint N32 Printer Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Xerox DocuPrint N32 as well as other Xerox manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Xerox DocuPrint N32. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Xerox DocuPrint N32 Printer Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Xerox DocuPrint N32 Printer Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Xerox DocuPrint N32 Printer Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Xerox DocuPrint N32 Printer Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Xerox DocuPrint N32 Printer Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.