Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide PDF

Pages 28
Year 2009
Language(s)
English en
1 of 28
1 of 28

Summary of Content for Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide PDF

Page 3

Main components ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 2 Paper path ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 3 Control panel ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4

Page 4

Table of contents SquareFold Trimmer Module

Page 5

The booklet is assembled and stapled in the booklet area of the finisher; therefore, the booklet enters the SquareFold Trimmer Module already assembled... Any adjustments to the image of the original and its placement on the booklet page must be done either from the machines UI or from your print driver...

Page 6

The top covers cannot be opened during normal operation or when the machine is idle... The covers can be opened only when an indicator is lit (refer to page 4) and a jam/fault occurs within the SquareFold Trimmer Module...

Page 7

Booklets exiting/leaving the SquareFold Trimmer Module may contain trim remnants/scraps from the previously trimmed booklet... This is due to static electricity build-up and is normal... If booklets contain trim remnants/scraps, simply remove and discard them...

Page 8

If one of these indicators (1a, 1b, 1c) is lit, the top covers can be opened, and the jam/fault cleared; otherwise, during normal operation or when the machine is idle, the top covers cannot be opened... For information on jam/fault clearance, refer to page 15...

Page 9

Square Fold feature Accessing the Square Fold options The Square Fold feature can be selected for both your copy and network print jobs... Depending on the copy/print job, the Square Fold feature can be selected from either the machine's UI or from the print driver on your workstation...

Page 10

For network print jobs, the Square Fold feature can be accessed from the print driver options either from your workstation (before the job is submitted for printing) or at the print server (after the job is submitted for printing)... To access the Square Fold feature for network print jobs, perform the following:

Page 11

For the remainder of this section, only the SquareFold Trimmer Module Control Panel and the machine's UI are shown... The descriptions given for each of the Square Fold options are applicable for both copy and network print jobs, and applies to any print server connected to the machine... To see the actual screens for each print server, go to the desired print server and follow the instructions given in the previous section entitled "Network print jobs... "

Page 12

This booklet was not square-folded... It has a more rounded, thicker appearance to the spine of the booklet... This booklet was square-folded... The booklet

Page 13

From the Booklet Creation screen, select On and Fold & Staple... From the Booklet Creation - Fold & Staple screen, select either Fold Only or Fold & Staple... To access the Trimmer feature, select the Booklet Trimming/Pressing button...

Page 14

For network print jobs, the Trimmer feature can be accessed from the print driver options either from your workstation (before the job is submitted for printing) or at the print server (after the job is submitted for printing)... To access the Trimmer feature for network print jobs, perform the following:

Page 15

For the remainder of this section, only the machine's UI is shown... The descriptions given for the Trimmer options are applicable for both copy and network print jobs, and applies to any print server connected to the machine... To see the actual screens for each print server, go to the desired print server and follow the instructions given in the previous section entitled "Network print jobs... "

Page 16

The following table shows various scenarios using different paper weights, media types, and trim setting selections... Use this table as a guideline when selecting a trim setting for your specific job... The settings shown in the following table are provided as examples and are not meant to represent every possible job scenario; again, use this table as a guideline only...

Page 17

What is the desired size of the finished booklet? Does the booklet contain full-page images? Are you using preprinted covers with full-page images? Are you trimming the booklet? Do you need to shift any full-page images in order to ensure they fit on the finished booklet?

Page 18

Use the various selections from your applications print driver; refer to your print drivers Help information, and/or Use the various selections from the machines UI for the booklet creation and image shift features; refer to your machines user guide for more information

Page 19

The top covers cannot be opened during normal operation or when the machine is idle... The covers can be opened only when an indicator is lit (refer to page 4) and a jam/fault occurs within the SquareFold Trimmer Module...

Page 20

If the SquareFold Trimmer Module Control Panel and/or the machines UI indicate there is a still a jam, recheck the SquareFold Trimmer Module (steps 1-8)...

Page 21

If a jam/fault occurs in the SquareFold Trimmer Module, the machines UI displays a jam/fault message... The following table provides a list of fault codes for the SquareFold Trimmer Module and a list of related finisher fault codes...

Page 22

If full, empty the container and reinsert it into the SquareFold Trimmer Module... If the container is partially pulled out, push it completely in...

Page 23

A top cover is open... Open the Top Left and Right Covers of the SquareFold Trimmer Module...

Page 24

If machines UI continues to reflect a fault/jam, open the finisher and remove any jams...

Page 25

50 in... (1271... 4 mm) width x 28... 5 in... (724... 3 mm) depth x 22 in... (558... 8 mm) height

Page 28

2009 Xerox Corporation... All rights reserved... Xerox, the sphere of connectivity design, and SquareFold are trademarks of Xerox Corporation in the United States and/or other countries...

Manualsnet FAQs

If you want to find out how the Ver.2.0 Xerox works, you can view and download the Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide on the Manualsnet website.

Yes, we have the User Guide for Xerox Ver.2.0 as well as other Xerox manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Xerox Ver.2.0. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Xerox SquareFold Trimmer Module Ver.2.0 Finishing Device User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.