Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide PDF

1 of 10
1 of 10

Summary of Content for Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide PDF

Fiery Express Driver Setup Guide   

July 20, 2011  Page 1 

Setup Guide

Fiery Express Driver for Mac OS X 10.7

Fiery Express Driver Setup Guide   

July 20, 2011  Page 2 

TABLE OF CONTENTS 1  INTRODUCTION .................................................................................................................. 3 

1.1  Overview .......................................................................................................................... 3  1.2  Features Supported ........................................................................................................... 3 

2  INSTALLING THE FIERY EXPRESS DRIVER SOFTWARE ........................................... 6  2.1  Prerequisites ..................................................................................................................... 6  2.2  Languages Supported ....................................................................................................... 6  2.3  Installing Driver Software ................................................................................................ 6  2.4  Adding Printers ................................................................................................................ 9 

3  KNOWN ISSUES ................................................................................................................. 10 

Fiery Express Driver Setup Guide   

July 20, 2011  Page 3 

1 INTRODUCTION

1.1 Overview This document describes EFIs Fiery Express Driver. The Fiery Express Driver is a universal driver that can be used with any Fiery. The driver will provide basic feature support for Fiery printing. The Fiery Express Driver is a solution that can be installed on any Macintosh using Mac OS X 10.7 to provide basic feature support for Fiery printing. Macintosh OS X 10.7 users who want to print using Fiery features should print to the Fiery Held queue then use Command WorkStation 5.x to edit the Job Properties.

1.2 Features Supported

The Fiery Express driver will support the following features for Fiery printing:

Duplex allows the automatic printing of a sheet of paper on both sides;

Staple turns stapling on/off;

Fiery Express Driver Setup Guide   

July 20, 2011  Page 4 

Output Paper Size allows selection of different paper sizes from a list. The supported paper sizes are: o Letter 8.5x11 o Legal 8.5x14 o Tabloid 11x17 o 12x18 o 13x19 o A5 o A4 o A3 o SRA3

Color Mode - The different native color models supported for printing are: o CMYCyan-magenta-yellow color model. o CMYKCyan-magenta-yellow-black color model. o RGBRed-green-blue color model. o GrayGray-scale color model.

Composite Overprint - All colors used for data are overlaid and printed on one plate so you can check the finished result without separating the colors.

Document Size will be displayed from the Paper Size option in the Page Setup dialog:

Fiery Express Driver Setup Guide   

July 20, 2011  Page 5 

Input Slot will be displayed from the Paper Feed option in the Print dialog:

The Imageable Area, total page size less any unprintable border used by a printer, will always be full-bleed for the selected media.

Fiery Express Driver Setup Guide   

July 20, 2011  Page 6 

2 INSTALLING THE FIERY EXPRESS DRIVER SOFTWARE The Fiery Express Driver provides basic feature support for Fiery printing using Mac OS X 10.7 clients.

2.1 Prerequisites

You must have Mac OS X 10.5, or above, installed to use the Fiery Express Driver.

You must know the user authentication password for your local machine. The password is required during the installation process.

IMPORTANT: The PPDs installed by the FieryExpressMacDriver.pkg are the only supported PPDs for use with the Fiery Express Driver. Printer specific PPDs are not supported. Macintosh OS X 10.7 users who want to print using Fiery features should print to the Fiery Held queue then use Command WorkStation 5.x to edit the Job Properties.

2.2 Languages Supported

The Fiery Express Driver provides support for English, French, Italian, German, Spanish, Japanese, Dutch, Brazilian Portuguese, Simplified Chinese, Swedish, Finnish, Danish, Norwegian, Turkish and Russian.

2.3 Installing Driver Software

Installing the Fiery Express Driver is a two-step process. First, the Fiery Express Driver files are installed to your hard disk. Second, the printer must be selected before printing .

Double-clicking on the FieryExpressMacDriver.pkg will begin the installation process.

Fiery Express Driver Setup Guide   

July 20, 2011  Page 7 

To continue the installation process, click Continue.

To install the Fiery Express Driver you must agree to the Terms as described in the License Agreement as described in the Software License Agreement dialog.

If you do NOT agree with the Terms as described in the Software License Agreement the installation process will be aborted.

After agreeing to the Software License Agreement terms, begin the Fiery Express Driver installation process by selecting the destination:

Fiery Express Driver Setup Guide   

July 20, 2011  Page 8 

Enter the directory location if you want change the default installation directory

Select Install to continue the installation.

Enter your user authentication.

Fiery Express Driver Setup Guide   

July 20, 2011  Page 9 

After successful user authentication the installation will continue. A successful installation will display the following dialog:

2.4 Adding Printers

After installing the Fiery Express Driver, a printer must be selected.

To select a printer: Go to the Apple menu to select System Preferences; Select Print&Fax in the Hardware category; Click on + and select the desired printer from the available list After selecting the printer, add it using one of the following methods:

Method 1: Select the Other option in the Print Using dialog box; Locate your printers PostScript Printer Description (PPD) file in the

/Library/Printers/PPDs/Contents/Resources/ .lproj folder; and Click Add to complete the Add Printer procedure.

Method 2: Select the Select Printer Software option in Print Using dialog box; Select EFI Fiery Express Mac Driver; and Click Add to complete the Add Printer procedure.

Fiery Express Driver Setup Guide   

July 20, 2011  Page 10 

3 KNOWN ISSUES The following are known issues when using the Fiery Express Driver: The Fiery Express Driver will not provide access to Fiery features. The PPDs installed by the

FieryExpressMacDriver.pkg are the only supported PPDs for use with the Fiery Express Driver. OEM-specific PPDs are not supported.

Fiery Software Uninstaller for Macintosh does not recognize the

Manualsnet FAQs

If you want to find out how the Fiery Express for Mac OS X 10.7 Xerox works, you can view and download the Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide on the Manualsnet website.

Yes, we have the Setup Guide for Xerox Fiery Express for Mac OS X 10.7 as well as other Xerox manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Setup Guide should include all the details that are needed to use a Xerox Fiery Express for Mac OS X 10.7. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Xerox Fiery Express for Mac OS X 10.7 Driver Setup Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.