Whistler XTR255 Laser Radar Detector Owners Manual PDF

1 of 9
1 of 9

Summary of Content for Whistler XTR255 Laser Radar Detector Owners Manual PDF

XTR- 140/255/260/330 Total Band Protection

LASER-RADAR DETECTOR

OWNERS MANUAL

The Whistler Group Corporate Headquarters 13016 N. Walton Blvd. Bentonville, AR 72712

Tel 479.273.6012 Fax 479.273.2927 Whistler Customer Return Center

551 N. 13th St. Rogers, AR 72756 Customer Service Tel 800.531.0004

www.whistlergroup.com

P/N 260011, Whistler 2007, REV2

Dear Whistler Owner,

If you have questions concerning the oper- ation of this Whistler product please call:

CuSTOmer SeRVICE 1-800-531-0004

Monday - Friday 8:00 am - 5:00 pm CT or visit our website

www.whistlergroup.com

Please keep the receipt in a safe place. You may register your product online at www.whistlergroup.com. For warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work. If the unit is returned without a dated store receipt, an out of warranty service charge applies.

INTRODUCTION

Note: Your warranty period begins at the time of purchase. The warranty is validated only by the dated store receipt! Please record the serial num- ber of the unit in the space provided in the warranty section of the manual. To fully acquaint yourself with the operation of your Whistler detector and to better understand the differ- ences between detecting radar, laser and safety radar signals, we recom- mend reading this entire manual or visiting our FAQ page on our website www.whistlergroup.com Enjoy your Whistler detector and please drive safely. Sincerely, The Whistler Group, Inc.

TABLE OF CONTENTS

XTR-330 FEATURES

Model Features Summary................................. 3 - 6 Installation....................................................... 7 - 8 Mounting Guidelines 7 Windshield Mounting 7 Power Connection And Fuse Replacement 8 Operation....................................................... 8 - 12 Power On Self Test & Volume 8 Integrated Real Voice 8 Feature Engaged Confirmation 9 Self Test Mute 9 Setting Saver 9 Auto Quiet Mode 9 Quiet Mode 10 City/City 1/City 2 Modes 10 Highway Mode 10 Dim/Dark Modes 11 Engaging/Disengaging VG-2 Detection 12 Vehicle Battery Saver Mode 12 Stay Alert 12 Laser & Radar Alerts..................................... 13 - 14 Laser Audio/Visual Alerts 13 Laser Tips 13 Pulse Protection 13 Safety Warning System 14 VG-2 Alerts......................................................... 14 POP Mode....................................................... 15 Option Select Mode........................................... 15 Troubleshooting Guide................................. 16 - 17 Care & Maintenance 17 Are Detectors Legal?......................................... 18 FCC Information 19 Speed Facts.................................................. 19 - 21 Radar Facts 19 Laser Facts 19-20 Other Speed Detection Systems 20 - 21 Warranty Information................................... 22 - 24 Specifications..................................................... 25 Accessories......................................................... 26

4 5

Total Band Protection

Red Numeric Icon Display

Detects POP Mode 360 Protection Real Voice

VG-2 Cloaking 3 City Modes

Quiet/Auto Quiet Mode Dim/Dark Mode Stay Alert Setting Saver Vehicle Battery Saver

Safety Warning System

Alert Priority Dual LED Periscopes

3

Features of XTR-330

3 4

XTR-140 FEATURES

Total Band Protection

Icon Display 360 Protection VG-2 Cloaking 3 City Modes

Quiet/Auto Quiet Mode Vehicle Battery Saver Alert Priority Dual LED Periscopes

XTR-255 FEATURES

4 5

3

14

20 17

18

19

4 5

3

Total Band Protection

Blue Numeric Icon Display

360 Protection VG-2 Cloaking 3 City Modes Quiet/Auto Quiet Mode

Dim/Dark Mode Stay Alert Setting Saver Vehicle Battery Saver

Safety Warning System

Alert Priority Dual Alert Display Dual LED Periscopes

21

14

15

16

Features of XTR-255

Features of XTR-140

13

17,18,19, 22

21

14

15

16 17,18,19, 22

12c

2 10

7

12

8

9

6 1

12c

2 11

7

12a

8

9

6 1

10

12b12b

12c

2 11

7

12a

8

9

6 1

10

XTR-260 FEATURES

4 5

3

Total Band Protection

Blue Numeric Icon Display

360 Protection VG-2 Cloaking 3 City Modes Quiet/Auto Quiet Mode

Dim/Dark Mode Stay Alert Setting Saver Vehicle Battery Saver

Safety Warning System

Alert Priority Dual Alert Display Dual LED Periscopes

21

14

15

16

Features of XTR-260

17,18,19, 2212c

2 11

7

12a

8

9

6 1

10 12b12b

Whistlers ergonomic and user-friendly design provides a new level of operating convenience. Special features include: Note: Not all units have all features listed. 1. Bracket Release Button provides quick

and easy release of the mounting bracket. 2. Speaker provides distinct audio warnings

for X, K, Ka band radar, safety radar, laser and VG-2.

3. Mounting Bracket Location slot holds mounting bracket firmly.

4. Radar Antenna compact, high-efficiency antenna receives radar signals.

5. Front Laser high gain optical lens provides increased sensitivity and field of view for leading-edge laser detection.

6. Rear Laser an integrated optical waveguide provides superior detection of laser signals transmitted from behind.

7. City Button - reduces the annoyance of false alerts typically encountered in urban driving areas.

8. Quiet Button - pressing QUIET before a radar signal is detected engages Auto Quiet Mode which provides clicking sounds after the initial warning. Pressing QUIET during a radar encounter silences audio alerts, while allowing visual alerts to keep you informed.

9. Power / Volume Control turns unit on/off and adjusts audio level.

10. Dim Dark - engages Dim/Dark modes 11. Menu Button - (XTR-140) turns VG2 on/off.

(XTR-255/260/330) enters option select mode. 12. Icon Display - offers easy-to-read display to

indicate power, city mode, radar band identification, and signal strength.

FEATURE DESCRIPTIONS 12a. Numeric Icon Display (XTR-255/260/330)

combines icon display with a 7 segment digital display that shows signal strength indication and band identification.

12b. Dual Alert Display: D.A.D. (XTR-255/260) provides additional visual alerts of threats ahead.

12c. Dual Alert LED Periscope - provides additional visual alerts.

13. VG-2/Laser Icon indicates the unit is receiving VG-2 or laser signals.

14. X-band Icon - indicates the unit is receiving an X-band signal.

15. K-band Icon - indicates the unit is receiving a K-band signal.

16. Ka-band Icon - indicates the unit is receiving a Ka-band signal.

17. H - indicates unit is in Highway mode. 18. C - City Icon - indicates that the unit is

operating in city mode. 19. Signal Strength Icon - indicates the strength

of the signal being detected. 20. K/Ka-band Icon - shows the unit is receiving

a K or Ka band signal. K/Ka indicator will flash for Ka band.

21. V - indicates that the unit is receiving a VG-2 signal. Indicates that VG-2 is engaged.

22. L - indicates that the unit is receiving a laser signal.

Total Band Protection - Complete Band Coverage that detects laser, radar, VG-2 and safety radar bands.

FEATURE DESCRIPTIONS

5 6

Mounting Guidelines Mount the unit as low as possible near the center of

the windshield. Do not mount the unit behind wipers, ornaments,

mirrored sunscreens, etc. These obstructions have metal surfaces which can affect radar and laser signals and reduce critical warning time. (Regular tinted glass does not affect reception.)

Some windshields have an Instaclear or Electriclear

type coating, which affects radar signals. Consult your dealer or the owners manual to determine if your windshield has this coating.

Avoid placing unit in direct contact with the wind shield.

To reduce the possibility of theft, conceal the unit when not in use.

Windshield Mounting Install the two suction cups and rubber bumper onto

the bracket by fitting them into their holes. Press the suction cups onto the windshield at the

location you have chosen.

IMPORTANT: Some newer cars have a plastic safety coating on the inside of the windshield. The windshield bracket may leave permanent marks on this type of surface. To find out if your vehicle has this type of windshield, check the owners manual or ask your dealer. We recommend that you do not leave the suction cup bracket on the windshield in direct sunlight. If the detector is removed, this may cause blistering of the dash in some vehicles.

INSTALLATION

7

Power Connection Plug the small end of the power cord into the

units power jack. Plug the large end into the vehicles cigarette

lighter.

Fuse Replacement The lighter socket plug is equipped with a replaceable 2 amp 3AG fuse located behind the silver tip. To replace the fuse, carefully unscrew the tip of the plug.

IMPORTANT: Unscrew slowly. The tip contains a spring which may fly out when disas- sembling. Insert the new fuse with the spring and screw on the tip. With use, the screw cap on the plug may loosen. Retighten it occasionally.

OPERATION Power On Self Test & Volume Each time your Whistler detector is turned on, an automatic self-test sequence confirms that the speak- er and visual displays are functional. To increase the volume, continue turning the volume knob.

Integrated Real Voice (XTR-330) When selected, Real Voice will be used to artic- ulate the following:

1. Band Identification 2. Safety Warning System messages 3. Feature Selection

Voice OFF/ON is selected by holding quiet but- ton for approximately 2 seconds. Voice ON will announce "caution", Voice OFF will give a dou- ble beep.

INSTALLATION Feature Engaged Confirmation Each time a button is pressed, one beep confirms the feature is on, two beeps confirm feature off. Self Test Mute Simply press the Quiet button during the self-test sequence to cancel the self-test audio. This will not affect radar/laser alerts. To restore the self- test audio, simply press the Quiet button during the next self-test. Setting Saver (XTR-255/260/330) Setting Saver saves your personalized settings so that when the detector is turned off and then on again, you do not have to re-enter them. Auto Quiet Mode Pressing QUIET before a radar signal is detected provides an alternate alert pattern, consisting of four beeps (indicating X, K, Ka or Safety Radar) followed by clicking. The clicking will continue for as long as the detected signal is present or any new signal is detected within 20 seconds, becoming more rapid as the strength of the signal increases. Press Quiet (before a signal is detected) to

engage Auto Quiet. Once the Auto Quiet mode is engaged, you

may cancel the audio alarm by pressing Quiet. Press Quiet (when the unit is not alarming) to

cancel Auto Quiet mode.

Quiet Mode Pressing Quiet cancels the audio during an alert and any new alert within 20 seconds. After approximately 20 seconds, 2 beeps are provided on any new alert, and the unit then remains quiet. Press Quiet to cancel the audio. Press Quiet a second time during an alert to restore the

standard audio alert pattern; or turn the unit off, then on.

OPERATION City/City I/City II Mode Whistlers Three Stage City Mode is designed to reduce the annoyance of automatic door openers, intrusion alarms and other devices which share fre- quencies with police radar. Generally, X band is used for these devices.

Press City button to cancel Highway mode and engage City Mode. The display will switch from H to C.

Press City button again to enter City I Mode. Press City button again to enter City II Mode.

Note: After 3 seconds, I or II City Mode indicator turns off on the XTR-140.

Pressing City button a fourth time cancels City II Mode and returns the unit to Highway Mode.

In City Mode, weak speed/safety radar signals give an initial alarm of two beeps, and then remains quiet unless the signal becomes very strong. When the signal strength increases, two additional beeps are provided. City I and City II Modes operate the same as Highway Mode, but in City I Mode, only the X band sensitivity is low- ered. In City II Mode, X-band is not detected. Caution: Some towns/small cities may still be using X band radar. City Modes do not change the audio alert for laser or VG-2.

Highway Mode Highway mode provides full audio warnings any time radar (X, K, Ka, Safety Radar) or laser signals are detected, and is recommended for open road driving.

OPERATION

8 9 10

OPERATION Dual Alert Display D.A.D. (XTR-255/260) Whistlers Dual Alert Display (D.A.D.) provides an additional attention getting visual alert to the already Intense Blue Numeric Display. The two extra LEDs in the display area flash on and off when the unit alarms to provide a unique visual alert. D.A.D. can be programmed, through the Option Select Mode to: 1. flash for all alarms, 2. remain on, or 3. turn D.A.D. off completely.

Dual LED Alert Periscope Whistlers new Dual LED Alert Periscope provides an additional attention getting visual alert. The two extra LEDs flash on and off when the unit alarms to provide a unique visual alert. This alert can be programmed, through the Option Select Mode to: 1. flash for all alarms, 2. remain on, or 3. turn LEDs off completely.

Dim/Dark Mode (XTR-255/260/330) Dim/Dark Mode reduces the illumination of the display. Press the Dark button to reduce illumination to a

Dim setting. Press the Dark button a second time engages Dark

Mode. In Dark mode display illumination is further reduced.Dim or dark can be engaged dur- ing an alert. In Dark Mode, the display goes dark for as long as a signal is being detect- ed and for 20 seconds after, then the display returns to the dimmer setting. Pressing the Dark button a third time restores full

illumination to the display.

Engaging/Disengaging VG-2 See Option Select Mode to turn this feature on. Vehicle Battery Saver Mode The Vehicle Battery Saver Mode automatically shuts off your detector after 6 hours. The timer is reset if the detector is turned off, unplugged or any button is pressed before the time has expired. The detector will alert you with an audible and visual warning before it shuts off. During this warning, you can momentarily reset the unit by pressing any button. This will reset the timer. If the unit has automatically turned itself off, press any button to turn the unit back on. Stay Alert Feature (XTR-255/260/330) The Stay Alert Feature is designed to test a drivers alertness. To engage (when unit is not alarming): Press and hold the City button for less then 2 seconds.

The H or C will flash indicating Stay Alert is activated.Within 30-60 seconds two beeps are sounded; to show alertness, the driver must press either the City, Menu or Quiet button within 3-5 seconds. If the button is pressed within 3-5 seconds, the cycle is repeated. If a button was not pressed within 3-5 seconds, the alarm sounds and the display flashes all the LEDs.

Press Dark to cancel Stay Alert.

WARNING!!! Stay Alert is NOT intended as a substitute for adequate rest. You should NOT operate a vehicle if you are drowsy. During extended periods of vehicle operation, you should take frequent breaks. Improper reliance on the Stay Alert may result in vehicle damage, personal injury or death. NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.

OPERATION Laser Audio / Visual Alerts When a laser signal is detected, the display indi- cates alert by illuminating the V/L and scrolling the signal strength indicators from right to left or display indicates an L on the display. The audio alert is continuous for a minimum of 3 seconds. Laser Tips If you are the targeted vehicle, a laser gun can often determine your speed within a few seconds after you receive an alert. In this situation there is generally no time to safely adjust your speed. However, if you are traveling near or behind the targeted vehicle and receive an alert, response time should be sufficient. Any laser alert, regardless of duration, requires immediate action! Pulse Protection

Pulse (or instant-on) radar is more difficult to detect than conventional radar because it remains off until activated to measure the speed of a targeted vehicle. When a pulse type transmission is detected, your Whistler detector sounds an urgent 3-second audio warning and flashes the Alert strength indicators at their fastest rate. After the 3-second pulse alert, the standard alert pat- tern continues for as long as the signal is pres- ent. It is important to respond promptly to a pulse alert, since warning time may be mini- mal.

LASER/RADAR ALERTS

11 12 13

POP MODE ALERTSLASER/RADAR ALERTS Safety Warning System/Audio/Visual Alerts When your Whistler detector detects a safety radar signal, it provides a distinctive audio tone and the Numeric Icon display shows an S. and a decimal point when a Safety radar sig- nal is detected. (XTR-255/260/330)

Note: You will not be able to receive SWS alerts if transmitters are not located in your area.

VG-2 ALERTS VG-2 Detection Mode The VG-2, also known as a radar detector detector, is a special receiver used by police to detect signals radiated by a radar detector. See page 21 for more information on VG-2.

When a VG-2 signal is detected, the VG-2 alert is sounded. After 3 seconds, the audio is can- celled and the VG-2 indicator flashes at a slower rate. Every 30 seconds, the detector checks for a VG-2 signal. This cycle is repeated if the VG-2 signal is detected again. If no signal is detected, two beeps are provided indicating an all clear condition.

During the period a VG-2 signal is detected, a radar signal cannot be detected. However, because the VG-2 alert has confirmed that a patrol car is nearby, you are already aware of the potential for speed monitoring and can adjust your speed accordingly. Laser detection is not affected while a VG-2 signal is detected.

14 15

TROUBLESHOOTING GUIDE Reset Features All user features can be reset to factory settings.

Default Factory 1. Unplug Power Cord from unit. 2. Press and hold Quiet. 3. Plug the Power Cord into the unit.

(Power switch turned on) 4. Wait for 2 beeps. 5. Release the Quiet button. Unit is now reset.

Default Factory Settings are: Highway Mode. Dim/Dark Mode to full illumination of display. Auto Quiet Mode OFF. VG-2 Detection Mode OFF. Self Test Mute OFF D.A.D. ON (XTR-255/260) Dual LED Alert Periscope to Flash POP Mode ON (XTR-330)

Your Whistler detector is expertly engineered and designed to exacting quality standards to provide you with reliable, trouble-free operation. If your unit has been correctly installed following the guidelines in this manual, but is not operating optimally, please refer to the troubleshooting guide below. PROBLEM: No display or audio. Check fuse in plug; replace if necessary with a 2 amp 3AG type. Check fuse for lighter sock- et; replace if necessary. Make sure cigarette the lighter socket is clean. PROBLEM: Audio alerts are not loud enough. Cancel Auto Quiet Mode or City Mode. Check audio level setting (see pg.8).

XTR-260/330 SWS Display

Alert

16

POP Mode Alerts Because POP Mode radar utilizes the same K or Ka band frequencies, POP Mode Alerts will be displayed as regular radar alerts.

OPTION SELECT MODE Option Select Mode (XTR-140) To turn VG-2 ON/OFF, press the Menu button and the V icon will illuminate indicating VG-2 is engaged. Press the Menu button again to disengage VG-2. Option Select Mode (XTR-255/260/330) Press the Menu button to enter Option Select Mode. Each press of the Menu button changes to the next selectable feature. The Dark (D) button and the Quiet (Q) button turns the feature ON/OFF or Blinking. The deci- mal point illumination indicates whether a fea- ture is on or off. A button must be pressed with- in 20 seconds or Option Select Mode will auto- matically be exited.

Model: XTR-255/260 Feature: Option: VG-2 (default = OFF) D for ON, Q for OFF

Dual LED Alert Periscope D or Q for ON, OFF, BLINKING (default = Blinking with alert)

Dual Alert Display D or Q for ON, OFF, BLINKING (default = Blinking with alert)

Model: XTR-330 Feature: Option: VG-2 (default = OFF) D for ON, Q for OFF

Dual LED Alert Periscope D or Q for ON, OFF, BLINKING (default = Blinking with alert)

POP Mode D for ON, Q for OFF (default = ON)

SWS D for ON, Q for OFF (default = ON)

PROBLEM: The unit gives laser alert when accelerating. See F. A. Q. on website.

PROBLEM: The unit alarms when vehicle hits bumps. Check for loose lighter socket; tighten and clean. Check connections at both ends of power cord. Substitute another cord to determine if the cord is defective. Return the defective cord to the factory.

If difficulties occur which cannot be solved by information in this Troubleshooting Guide, please call Whistler Customer Service at 1-800-531-0004 or visit our FAQ page at www.whistlergroup.com/faq-detectors.asp before returning your unit for service.

Care & Maintenance During the summer months, avoid prolonged exposure to direct sunlight by removing your unit from the dash when your vehicle is parked for an extended period of time. Do not spray water, cleaners, or polishes directly onto the unit. The spray may penetrate through the openings and damage the unit. Also, do not use any abrasive cleaners on the units exterior.

In Most States YES! Laser-Radar detectors are legal in every state (with the exception of Virginia and Washington, D.C., which have local regula- tions restricting the use of radar receivers in any vehicle) when used in automobiles or light trucks (under 10,000 lbs.). Concerning trucks over 10,000 lbs., the Federal Highway Administration (FHWA) issued a regulation, effective January, 1994 which prohibits radar and laser detector use in these types of vehicles nationally. Prior to the FHWA regulation, laws existed in the state of New York restricting the use of radar detectors in trucks over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.

FCC Information FCC ID: HSXWH10 - XTR-140/255/260/330 FCC ID: HSXWH21 - XTR-140/255/260/330

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT: FCC requirements state that changes or modifications not expressly approved by Whistler could void the users authority to operate the equipment.

TROUBLESHOOTING GUIDE ARE DETECTORS LEGAL?

17

SPEED MONITORING Radar Facts A radar gun operates by transmitting radio waves at certain frequencies which reflect off objects and are then picked up by the radar guns receiving section. When a radar beam reflects off a moving target, a measurable frequency shift occurs. The radar unit converts this shift into miles per hour to determine your vehicles speed. Currently, the FCC (Federal Communications Commission) permits operation of traffic radar guns at X Band (10.500 - 10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band (33.400 - 36.000 GHz).

Note: A radar detector will only alarm if an officer is transmitting on any one of the above radar bands.

Laser Facts Its well documented that many radar guns cannot reliably provide the speed of a targeted vehicle that is traveling in a group of vehicles. In contrast, a laser gun can target a specific vehicle out of a line of traffic and determine its speed. The advantage of laser over radar in terms of target identification is the result of the laser guns narrow beam. A radar transmission can cover more than a four-lane highway at a distance of 1,000 feet, compared with a laser transmission which covers about 3 feet at the same distance. For best protection, keep these points, listed on the following section, in mind:

18 19

SPEED MONITORING Laser Facts (Continued) Because your vehicles license plate or headlights are the laser guns primary targets, mounting your Whistler detector on the dashboard can improve laser detection at short range.

Do not follow closely behind any vehicle you cannot see through. If you cant see past a vehicle ahead of you, chances are your detector wont either.

The receiving range of your laser detector will not be the same as a radar detector. Laser guns are most often used at short range.

Whistler Laser/Radar detectors receive all current laser guns which operate at a laser wavelength of 905 +/- 10nm. Pro Laser I II III LTI 20-20 Ultra Lyte

Other Speed Detection Systems Several techniques other than radar or laser are used to measure vehicle speeds. When these methods are being used, no detector can provide a warning. These techniques include:

Pacing - A patrol car drives behind you and matches your driving speed.

Vascar/Aircraft - The time it takes a vehicle to travel a known distance is measured.

20

SPEED MONITORING Radar Detector Detectors (VG-2) Spectre The Interceptor VG-2, or simply VG-2, is a microwave receiver used by police to detect signals radiated by the local oscillator of a radar detector. Because its purpose is to identify persons driving with radar detectors, the VG-2 is known as a radar detector detector.The VG-2 is a tool used by the police to identify radar detector equipped vehicles. If caught, in a state where detectors are illegal, (see page 18), drivers risk losing their radar detector and receiving a fine. In addition, instant-on radar is almost always used in combination with a VG-2, leaving unsus- pecting motorists vulnerable to receiving two ticketsone potentially for speeding, the other for possession of a detector. Having a radar detector capable of detecting the VG-2 may alert you to the presence of a speed trap. For more information on speed monitoring technologies, please visit our F.A.Q. page on our website: www.whistlergroup.com It is the responsibility of the individual radar detector operator to know and understand the laws in your area regarding the legality of the use of radar detectors.

NOTE: Having a radar detector capable of detecting the VG-2 may alert you to the pres- ence of a speed trap. The newest tool Police have to detect radar detectors is called Spectre. Spectre can detect the majority of undetectable (VG-2) laser/radar detectors on the market.

21

WARRANTY INFORMATION Consumer Warranty This Whistler Laser/Radar detector is warrant- ed to the original purchaser for a period of one year from the date of original purchase against all defects in materials and workmanship. This limited warranty is void if the unit is abused, modified, installed improperly, if the housing has been removed, or if the serial number is missing. There are no express warranties cov- ering this product other than those set forth in this warranty. All express or implied warranties for this product are limited to one year. Whistler is not liable for damages arising from the use, misuse, or operation of this product.

Service Out of Warranty Units will be repaired at out of warranty service rates when: The units original warranty has expired. A dated store receipt is not supplied. The unit has been returned without its serial number. The unit has been abused, modified, installed improperly, or had its housing removed.

Service Under Warranty During the warranty period, defective units will be repaired without charge when returned with a dated store receipt to the address below. Units returned without dated store receipt will be handled as described in section Service Out Of Warranty. Due to the specialized equipment necessary for testing a laser/radar receiver, there are no authorized service stations for Whistler brand detectors other than Whistler.

22

WARRANTY INFORMATION When returning a unit for service, please follow these instructions:

1. Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with return receipt requested to:

Whistler Repair Dept. 551 N. 13th St.

Rogers, AR. 72756 Please allow 3 weeks turn around time.

IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted!

2. Include with your unit the following information,clearly printed: Your name and street address (for shipping via UPS), a daytime telephone number and an e-mail address, if applicable. A detailed description of the problem (e.g., Unit performs self-test but does not respond to radar). A copy of your dated store receipt or bill of sale.

3. Be certain your unit is returned with its serial number. For reference, please write your units serial number in the following space: ________. Units without serial numbers are not covered under warranty. IMPORTANT: To validate that your unit is within the warranty period, make sure you keep a copy of your dated store receipt. You may register your warranty online at www.whistlergroup.com, however, for warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work.

Service Out of Warranty (Continued) The minimum out of warranty service fee for your Whistler detector is $35.00 (U.S.). If you require out of warranty service, please return your unit as outlined in the section Service Under Warranty along with a certified check or money order for $35.00. Payment may also be made by MasterCard, VISA or American Express; personal checks are not accepted.

In the event repairs cannot be covered by the minimum $35.00 service fee, you will be contacted by a Whistler technical service specialist who will outline options available to you. If you elect not to have your unit repaired, it will be returned to you along with your certified check or money order. IMPORTANT: When returning your unit for service, be certain to include a daytime telephone number and an email address (if applicable). Customer Service If you have questions concerning the operation of your Whistler detector, or require service during or after the warranty period, please call Customer Service at:

1-800-531-0004. Representatives are available to answer your questions

Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT). www.whistlergroup.com

23

WARRANTY INFORMATION

24

SPECIFICATIONS Laser Wavelength: 905 50 nanometers (nm)

Radar Frequencies: 10.500 - 10.550 GHz (X Band) 24.050 - 24.250 GHz (K Band ) 33.400 - 36.000 GHz (Ka Superwideband)

Operating Temperature Range: -20 C to +80 C (-4 F to +176 F)

Power Requirements: Operational 12 to 15 volts DC, 250mA nominal Vehicle Battery Saver, 30mA nominal.

One or more U.S. patents may apply: #5,146,227, #5,379,456, #5,666,120, #5,990,821 #7,215,276

POP Mode is a trademark of MPH Industries, Inc. SWS is a trademark of Safety Warning System L.C.

Specifications are subject to change without notice.

These and other accessories can be ordered directly from Whistler by calling 1-800-531-0004 or visiting our online store at www.whistlergroup.com

Order # Description Price 202138 Visor Bracket $ 6.95

202151 Windshield Bracket Kit $ 9.95

206552 Straight Power Cord (5) $14.95

206553 Coiled Power Cord (7) $15.95

206880 Hardwire Kit (10' ) $ 9.95 (for wiring to fuse box)

206666 Modular* Cord Package $17.95 (includes coiled and straight cords, and power adapter)

159032 Package of 8 Suction Cups $ 2.95

402081 Non Skid Dash Pad $ 6.95

Manualsnet FAQs

If you want to find out how the XTR255 Whistler works, you can view and download the Whistler XTR255 Laser Radar Detector Owners Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Whistler XTR255 as well as other Whistler manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Whistler XTR255. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Whistler XTR255 Laser Radar Detector Owners Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Whistler XTR255 Laser Radar Detector Owners Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Whistler XTR255 Laser Radar Detector Owners Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Whistler XTR255 Laser Radar Detector Owners Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Whistler XTR255 Laser Radar Detector Owners Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.