Whistler XTR195 Laser Radar Detector Owners Manual PDF

1 of 9
1 of 9

Summary of Content for Whistler XTR195 Laser Radar Detector Owners Manual PDF

OWNERS MANUAL

The Whistler Group Corporate Headquarters 13016 N. Walton Blvd. Bentonville, AR 72712

Tel 479.273.6012 Fax 479.273.2927 Customer Return Center

551 N. 13th St. Rogers, AR 72756 Customer Service Tel 800.531.0004

www.whistlergroup.com

P/N 203343 2008 The Whistler Group, Inc.

XTR-180/ XTR-185 XTR-190/XTR-195

Battery Powered

LASER-RADAR DETECTOR

Dear Whistler Owner, If you have questions concerning the operation of this Whistler product please call:

CuSTOmer SeRVICE 1-800-531-0004

Monday - Friday 8:00 am - 5:00 pm CT or visit our website

www.whistlergroup.com Please keep the receipt in a safe place. You may regis- ter your product online at www.whistlergroup.com. For warranty verification purposes, a copy of your dated store receipt must still accompany any unit sent in for warranty work. If the unit is returned without a dated store receipt an out of warranty service charge applies. Note: Your warranty period begins at the time of pur- chase. The warranty is validated only by the dated store receipt! Now is the time to record the serial number of the unit in the space provided in the war- ranty section of the manual. To fully acquaint yourself with the operation of your Whistler and to better understand the differences between detecting radar, laser and safety radar sig- nals, we recommend reading this entire manual or visit our FAQ page on our website www.whistler- group.com Enjoy your Whistler and please drive safely. Sincerely, The Whistler Group, Inc.

Model Features Summary .................... 2 - 3 Installation ........................................... 4 - 6 Battery Installation 4 Mounting Guidelines 5 Windshield Mounting 5- 6 Power Connection and Fuse Replacement 6 Operation .......................................... 6 - 13 Battery Life 6 Battery Charging 6 Power On, Self-Test Mute 7 Setting Saver 7 Feature Engaged Confirmation 7 Audio Level Adjustment 7 Quiet Mode 8 Auto Quiet Mode 8 City/City 1/ City 2 Mode 9 Highway Mode 10 Teach/Tutorial Mode 10 Dim/Dark 10 Engaging/Disengaging VG-2 11 VG-2 Detection/Alerts 11 Auto Shut Off Mode 12 Stay Alert Feature 13 Safety Warning System ......................... 13 Laser/Radar Alerts ................................. 14 Speed Radar Audio/Visual Alerts 14 Laser Audio/Visual Alerts 14 Pulse Protection 14 Alert Priority 15 POP Mode Alerts ................................. 15 Reset Features ....................................... 16 Troubleshooting Guide ..................... 16 - 17 Care and Maintenance ........................... 18 Are Detectors Legal? ............................. 18 FCC Information ..................................... 19 Speed Monitoring ............................ 19 - 22 Radar Facts 19 POP Mode 19 Total Band Protection 20 Laser Facts/Tips 20-21 Other Speed Detection Systems 21 -22 Warranty Information ....................... 22 - 25 Specifications ......................................... 25 Accessories ............................................ 26

WHISTLER FEATURES FEATURE DESCRIPTIONS Battery Installation Units requires 3 AA rechargeable batteries (included). Unit may need to be plugged into a live lighter socket to fully charge the batteries overnight before first use! Remove the battery compart- ment cover by sliding the cover to the edge of the unit and lift up. Insert batteries and reinstall battery compartment cover. Ni-MH rechargeable batteries are recommend- ed and are included with the unit. Note: DO NOT mix battery types as this can damage the batteries. Important: Use only NiMH batteries. Ni-Cd bat- teries should not be used. These batteries will not provide enough capacity to be useful. Caution: Only use rechargeable batteries. Charging non-rechargeable batteries can dam- age the unit or possibly cause the batteries to explode. See battery charging section (page 6) to charge batteries with the power cord.

Mounting Guidelines Mount the unit as low as possible near the

center of the windshield. Do not mount your unit behind wipers,

ornaments, mirrored sunscreens, etc. These obstructions have metal surfaces which can affect radar and laser signals and reduce critical warning time. (Regular tinted glass does not affect reception.)

Some windshields have an Instaclear or Electriclear type coating, which affect radar signals. Consult your dealer or the vehicles owners manual supplied with your vehicle to determine if your windshield has this coating.

Avoid placing unit in direct contact with windshield.

To reduce the possibility of theft, unplug and conceal your unit when not in use.

INSTALLATION

1

79

6

4 5

3

10

12

Accessories: Windshield Bracket Kit, Rechargeable Batteries, Straight Power Cord

11

XTR-180/185/190/195 Whistlers ergonomic and user-friendly design pro- vides a new level of operating convenience. Special features include: 1. Bracket Release Button Provides quick

and easy release of the mounting bracket. 2. Speaker Provides distinct audio warnings

for X, K, Ka band radar, safety radar, laser and VG-2. 3. Mounting Bracket Location Slot holds

mounting bracket firmly. 4. Radar Antenna Compact, high-efficiency

antenna receives radar signals. 5. Front Laser Antenna High gain optical lens

provides increased sensitivity and field of view for leading-edge laser detection.

6. Rear Laser Antenna An integrated optical waveguide provides superior detection of laser signals transmitted from behind.

7. City Button - Reduces the annoyance of false alerts typically encountered in urban driving areas.

8. Quiet Button - Pressing QUIET before a signal is detected engages Auto Quiet Mode. Pressing QUIET during a radar/laser encounter silences audio alerts. (A long press of QUIET turns VG-2 On/Off)

9. Power/Dark -Turns unit on/off and engages Dim/Dark settings (press and hold).

10. Volume Button Adjust volume Up/Down. 11. Icon Display Provides distinct visual

confirmation of signals detected, signal strength, and indicates engaged modes of operation.

12. Power Jack Provides connection for the power cord.

13. Battery Compartment Compartment for which you place the batteries.

14. Solar Panel The solar panel absorbs sunlight extending the battery life of the unit.

8

3 42

1

7

9

14

6 10

12

118

2

2

13

1

79

6

10

12

118

2

Windshield Mounting Install the two suction cups and rubber bumper

onto the bracket by fitting them into their holes.

Press the suction cups onto the windshield at the location you have chosen.

Slide the detector onto the bracket until it locks into place.

If necessary, the unit may be leveled by bending the windshield bracket.

Press the bracket release button and remove the detector before bending.

Power Cord Connection Plug the small end of the power cord into the

units power jack. Plug the large end into the vehicles cigarette

lighter socket. Note: Cord fits tightly into detector. When installing the cord, expect some resistance.

Fuse Replacement The lighter socket plug is equipped with a replaceable 2 amp 3AG fuse located behind the silver tip. To replace the fuse, carefully unscrew the tip of the plug. Important: Unscrew slowly. The tip contains a spring which may fly out when disassembling. Insert the new fuse with the spring and screw on the tip. With use, screw cap on plug may loosen. Retighten occasionally. Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp fuse.

INSTALLATION Battery Life The unit can provide approximately 15 hours of laser/radar detection. There are settings that can maximize battery life. 1) Display intensity set to Dim 2) Auto Quiet engaged 3) Auto Shut Off set to 1 hour 4) Using a lower volume setting 5) Using Mute whenever possible Important: The detectors display will flash a I and three fast beeps will sound when the batter- ies have approximately one hour of battery life left. This is a reminder to recharge your batter- ies.

Battery Charging Power Cord: Plug your included power cord into your detector and into your lighter socket to slowly charge the rechargeable batteries. This will also provide power to the detector. The dis- play will dimly blink the III icon when the unit is charging the batteries. When the power cable is removed from the detector or the vehicles lighter socket is switched off, the unit will alarm and illuminate the icons in a sequencing fashion, then turn off. Note: As with all battery operated devices, remove the batteries when this unit will not be used for an extended period of time. Damage caused by leaky or improperly charged batteries are not covered under warranty.

Solar Panel: In direct sunlight, the solar panel provides an additional charge to the batteries. The solar panel is not functional when the unit is powered by the power cord.

OPERATION

Windshield

Mounting

5 6

Rubber Bumper

Power On and Self-Test Each time your Whistler detector is turned on, an automatic self-test sequence confirms that the speaker and visual displays are functional. Press Power. Display shows in order:

1. X-Band 2. K-Band 3. Ka-Band 4. LASER 5. SWS 6. Battery Status 7. Highway

Self Test Mute Simply press the Quiet button during the self-test sequence to cancel the self-test audio. This will not affect radar/laser alerts. To restore the self-test audio, simply press the Quiet button during the next self-test. Setting Saver Setting Saver saves your personalized settings when the detector is turned off or you lose power.

Feature Engaged Confirmation Each time a button is pressed, one beep confirms feature on, two beeps confirm feature off.

Audio Level Adjustment The audio levels can be adjusted high to low or low to high. Press and hold the VOL button and the

volume level will increase (Level III) then proceed to lower the volume (Level 0). Continuing to hold this button will repeat the sequence. As audio level is adjusted, beeps are provided and the display indicates volume level.

OPERATION

7

Quiet Mode Quiet cancels audio during an alert and any new alert within 20 seconds. After 20 seconds, approximately 2 beeps are provided on any new alert and unit then remains quiet. Press Quiet to cancel the audio. Press Quiet a second time during an alert to restore the standard audio alert pattern; or turn the unit off, then on.

Auto Quiet Mode Auto Quiet reduces the selected audio level to level (1) approximately 5 seconds after a radar or safety radar signal is detected. The alert for any new signal within 20 seconds will resume at level (1). Auto Quiet does not affect VG-2 or laser alerts. Press Quiet/Menu (before a signal is detected)

to engage Auto Quiet. Once the Auto Quiet mode is engaged, you

may cancel the audio alarm by pressing Quiet. Press Quiet (when the unit is not alarming) to

cancel Auto Quiet mode.

OPERATION City/City I/City II Mode Whistlers Three Stage City Mode is designed to reduce the annoyance of automatic door open- ers, intrusion alarms and other devices which share frequencies with police radar. Generally, X band is used for these devices.

Press City to cancel Highway mode and engage City. Display will switch from H to C

Press City again to enter City I Mode Press City again to enter City II Mode

Note: After 3 seconds, I or II City Mode indicator turns off.

Pressing City a fourth time cancels City II Mode and returns the unit to Highway Mode.

In City Mode, weak speed/safety radar signals give an initial alarm of two beeps, and then remains quiet unless the signal becomes very strong. When the signal strength increases, two additional beeps are provided. City I and City II Modes operate the same as Highway Mode, but in City I Mode, only the X band sensitivity is low- ered. In City II Mode, X-band is not detected. Caution: Some towns/small cities may still be using X band radar. City Modes do not change the audio alert for laser or VG-2.

OPERATION Highway Mode Highway mode provides full audio warnings any time radar (X, K, Ka, Safety Radar) or laser sig- nals are detected, and is recommended for open road driving. For more information on City and Highway mode, please visit our FAQ page on our website: www.whistlergroup.com

Teach/Tutorial Mode Provides simulated alerts for each type of signal.

Press City and Quiet simultaneously and release. Unit will go thru all the bands detected. Press Power to exit.

Dim/Dark Mode Dim/Dark Mode reduces the illumination of the display

Press and hold Power for 2 seconds to reduce illumination to a dim setting

Pressing and holding the Power button a second time engages Dark Mode. The display illumination is further reduced.

Dim or Dark can be engaged during an alert. In Dark Mode, the display goes dark for as long as a signal is being detected and 20 seconds after, then the display returns to the dimmer setting.

Pressing and holding the Power button a third time restores the display to full illumination.

OPERATION

8 9 10

Engaging/Disengaging VG-2 To engage VG-2:

Press and hold the Quiet button until the V/L is illuminated.

To disengage VG-2: Press and hold the Quiet button until the

V/L turns off.

VG-2 Detection When a VG-2 signal is detected, the VG-2 alert is sounded for 3 seconds and the display flashes the V/L icon for 30 seconds.This cycle is repeated if the VG-2 signal is again detected. During the period a VG-2 signal is detected, a radar signal cannot be detected. However, because the VG-2 alert has confirmed that a patrol car is nearby, you are already aware of the potential for speed monitoring and can adjust your speed accordingly. Laser detection is not affected while a VG-2 signal is detected.

VG-2 Audio/Visual Alerts Note: You must turn this feature on before it will detect VG-2. When a VG-2 signal is detected, the detector hides its own radiated signal and becomes undetectable by the VG-2. Every 30 seconds, the detector checks for a VG-2 signal. If a VG-2 signal is still present, the unit continues to hide and repeats the VG-2 alert. If no signal is detected, two beeps are provided, indicating an all clear condition. During a VG-2 Alert X, K, and Ka band signals cannot be received (Reference page 21 for VG-2 information).

OPERATION OPERATION Stay Alert Feature The Stay Alert Feature is designed to test a dri- vers alertness. To engage (when unit is not alarm- ing): Press and hold City until a first audible alert is

given. The H or C will flash indicating Stay Alert is activated.

Within 30-60 seconds two beeps are sounded; to show alertness, the driver must press either the City, Volume, or Quiet buttons within 3-5 seconds. If a button is pressed within 3-5 sec- onds, the cycle is repeated. If a button is not pressed within 3-5 seconds an alarm sounds and displays multiple scrolling icons Press Power to cancel Stay Alert.

WARNING!!! Stay Alert is NOT intended as a substitute for adequate rest. You should NOT oper- ate a vehicle if you are drowsy. During extended periods of vehicle operation, you should take fre- quent breaks. Improper reliance on the Stay Alert feature may result in vehicle damage, personal injury or death. NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.

SWS

Safety Warning System In communities where Safety Warning System transmitters are located, the detector will receive over 60 messages. When Safety Radar is detected, the audio alert is given and the dis- play alternately flashes the I, III and II icons. Note: Not all areas have Safety Warning System

transmitters.

OPERATION

11 12 13

Auto Shut Off Mode Auto Shut Off Mode automatically shuts off the detector if you forget. The timer is reset: 1. Each time the detector is turned off 2. The optional power cord is unplugged 3. Any button is pressed before the timer has

expired. The detector will alert you with an audible and visual warning before it shuts off. This auto off function can be programmed for the following: Off, 1, 2, or 3 hours. During this warning you can reset the timer by pressing any button. If the unit has automatically turned itself off, press the Power button to turn the unit back on. You can manually engage the Auto Shut Off Mode by pressing and holding the City button until one beep is heard. The Auto Shut Off feature can be disabled or changed to 1 hour, 2 hours, or 3 hours. Press and hold the Quiet button for approximately 2 seconds until a single beep is heard. The dis- play will flash the H or C and the signal strength indicators I, II or III, representing hours. Pressing the Volume button will change the selection. When no signal strength icons are flashing, the feature is disabled.

Speed Radar Audio/Visual Alerts When X, K, or Ka band is detected, the band ID and signal strength is displayed. The audio alert is continuous and has a geiger counter-like pattern. The faster the beep, the closer or stronger the radar source.

I = weak signal, III = strong signal

K/Ka Icon will flash for Ka detection

Laser Audio/Visual Alerts When a laser signal is detected, the V/L will be illuminated.

Pulse Protection

Pulse (or instant-on) radar is more difficult to detect than conventional radar because it remains off until activated to measure the speed of a targeted vehicle. When a pulse type transmission is detected, your Whistler detector sounds an urgent 3-second audio warning and the display will show a max signal strength level.

Max Signal After the 3-second pulse alert, the standard alert pattern continues for as long as the signal is present. It is important to respond promptly to a pulse alert, since warning time may be minimal.

LASER/RADAR ALERTS Alert Priority When two or more signals are received at the same time, the alert priority is: 1. Laser 2. VG-2 3. Speed Radar 4. Safety Radar Example: If X band is alerting, then suddenly a VG-2 signal is detected, the VG-2 warning will override the X band alert.

POP MODE ALERTS POP Mode Alerts Because POP Mode travels on regular radar bandwidth, there is no particular alert for POP

Mode transmissions. POP Mode alerts will be displayed as a regular radar alert.

ALERT PRIORITY Reset Features All user features can be reset to factory settings.

Unplug Power Cord from unit. Remove Batteries. Press and hold Power and Quiet. Plug Power Cord into unit. Wait for 2 beeps. Release Power and Quiet buttons. Unit is now reset to the following features and settings.

Default factory settings are: 1. Audio to level (4) 2. Display shows H 3. Auto Quiet Mode OFF 4. VG-2 Detection Mode OFF 5. Auto Shut Off to 1 hour 6. Full Power Up sequence 7. Dim/Dark to full Illumination

TROUBLESHOOTING Your Whistler detector is expertly engineered and designed to exacting quality standards to provide you with reliable, trouble-free operation. If your unit has been correctly installed following the guidelines in this manual, but is not operating optimally, please refer to the troubleshooting guide below.

PROBLEM: No display or audio. Make sure batteries are installed with the

correct polarity. Make sure batteries are fully charged. Make sure battery contacts are clean. Check fuse in Whistler plug; replace if

necessary with a 2 amp 3AG type.

RESET FEATURES

14 15 16

Check fuse for lighter socket; replace if necessary.

Make sure lighter socket is clean. PROBLEM: Unit alarms when vehicle hits bumps. Make sure batteries are seated properly. Make sure that the battery door is fully closed. Make sure battery contacts are clean. Check for loose lighter socket; tighten and

clean. Check connections at both ends of power

cord. Substitute another cord to determine if cord is defective. Return defective cord to the factory.

PROBLEM: Audio alerts are not loud enough. Cancel Auto Quiet Mode or City Mode. Check audio level setting (see pages 7-8 ).

PROBLEM: Low Battery Life. One or more of the batteries may be

defective. See the battery life tips on page 6. If difficulties occur which cannot be solved by information in this Troubleshooting Guide, please call Whistler Customer Service at 1-800-531-0004 or visit our FAQ page at www.whistlergroup.com/faq-detectors.asp, before returning your unit for service. PROBLEM: Unit turns itself off See Auto Shut Off Mode feature on page 12.

TROUBLESHOOTING Care And Maintenance During the summer months, avoid prolonged exposure to direct sunlight by removing your unit from the dash when your vehicle is parked for an extended period of time. Do not spray water, cleaners, or polishes directly onto the unit. The spray may penetrate through the openings and damage the unit. Also, do not use any abrasive cleaners on the units exterior. As with all battery operated devices remove the batteries when this unit will not be used for an extended period of time. Damage caused by leaky or improperly charged batteries are not covered under warranty. Check with the battery manufacturer about the specific battery warranty.

ARE DETECTORS LEGAL? In Most States YES! Laser-Radar detectors are legal in every state (with the exception of Virginia and Washington, D.C., which have local regulations restricting the use of radar receivers in any vehicle) when used in automobiles or light trucks (under 10,000 lbs.). Concerning trucks over 10,000 lbs., the Federal Highway Administration (FHWA) issued a regulation, effective January, 1994 which prohibits radar and laser detector use in these types of vehicles nationally. Prior to the FHWA regulation, laws existed in the state of New York restricting the use of radar detectors in trucks over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.

CARE AND MAINTENANCE FCC ID : HSXWH15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device many not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important: FCC requirements state that changes or modifications not expressly approved by Whistler could void the users authority to operate the equipment.

SPEED MONITORING Radar Facts A radar gun operates by transmitting radio waves at certain frequencies which reflect off objects and are picked up by the radar guns receiving section. When a radar beam reflects off a moving target, a measurable frequency shift occurs. The radar unit converts this shift into miles per hour to determine your vehicles speed. Currently, the FCC (Federal Communications Commission) permits operation of traffic radar guns at X Band (10.500 - 10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band (33.400 - 36.000 GHz). Note: A radar detector will not alarm if an offi- cer is not transmitting on any one of the above radar bands.

POP Mode POP Mode is a feature on some newer radar guns operating on K and Ka bands. When the gun is in POP Mode and activated, a brief burst of energy, less that 1/15 of a second, is transmit- ted and the vehicles speed is quickly acquired. A detector without POP Mode detection capabili- ty cannot respond to this brief transmission.

FCC INFORMATION

17 18 19

Total Band Protection Complete Band Coverage that detects laser, radar, VG-2 and safety radar bands.

Laser Facts Its well documented that many radar guns cannot reliably provide the speed of a targeted vehicle that is traveling in a group of vehicles. In contrast, a laser gun can target a specific vehicle out of a line of traffic and determine its speed. The advantage of laser over radar in terms of target identification is the result of the laser guns narrow beam. A radar guns transmission can cover more than a four-lane highway at a dis- tance of 1,000 feet, compared with a laser guns transmission which covers about 3 feet at the same distance. For best protection, keep these points in mind: Because the vehicles license plate or headlights are the laser guns primary targets, mounting the Whistler detector on the dashboard can improve laser detection at short range. Do not follow closely behind any vehicle you cannot see through. If you cant see past a vehicle ahead of you, chances are your detector wont either. The receiving range of a laser detector will not be the same as a radar signal. Laser guns are most often used at short range.

Whistler Laser-Radar detectors receive all current laser guns which operate at a laser wavelength of 905 +/- 10nm.

Pro Laser I II III LT1 20-20 Ultra Lyte

SPEED MONITORING

20

Laser Tips If you are the targeted vehicle, a laser gun can often determine your speed within a few seconds after you receive an alert. In this situa- tion there is generally no time to safely adjust your speed. However, if you are traveling near or behind the targeted vehicle and receive an alert, response time should be sufficient. Any laser alert, regardless of duration, requires immediate action!

Other Speed Detection Systems Several techniques other than radar or laser are used to measure vehicle speeds. When these methods are being used, no detector can provide a warning. These techniques include: Pacing - A patrol car drives behind you and

matches your driving speed. Vascar/Aircraft - The time it takes a vehicle to

travel a known distance is measured.

Radar Detector Detectors: VG-2, Spectre The Interceptor VG-2 or simply VG-2, is one type of microwave receiver used by Police to detect signals radiated by the local oscillator of a radar detector. Because it purpose is to identify persons driving with radar detectors, these devices are known as a radar detector detector (RDD). An RDD is the primary tool used by the police to identify radar detector equipped vehicles. If caught in a state or country where detectors are illegal (see page 18). drivers risk losing their radar detector and receiving a fine. In addition, instant-on radar is almost always used in combination with a RDD, leaving unsuspecting motorists vulnerable to receive two tickets - one potentially for speeding, the other for possession of a detector.

SPEED MONITORING Note: Having a radar detector capable of detecting the VG-2 may alert you to the pres- ence of a speed trap. The newest tool Police have to detect radar detectors is called Spectre. Spectre can detect the majority of undetectable (VG-2) laser/radar detectors on the market. It is the responsibility of the individual radar detector owner to know and understand the laws in your area regarding the legality of the use of radar detectors.

WARRANTY INFORMATION Consumer Warranty This Whistler Laser-Radar detector is warranted to the original purchaser for a period of one year from the date of original purchase against all defects in materials and workmanship. This limited warranty is void if the unit is abused, modified, installed improperly, if the housing and/or serial numbers have been removed. There are no express warranties covering this product other than those set forth in this warranty. All express or implied warranties for this product are limited to the above time. Whistler is not liable for damages arising from the use, misuse, or operation of this product. Note: Damaged caused by incorrect battery placement or battery leakage is not covered under this warranty.

SPEED MONITORING

21 22

Service Under Warranty During the warranty period, defective units will be repaired without charge to the purchaser when returned with a dated store receipt to the address below. Units returned without a dated store receipt will be handled as described in section

Service Out Of Warranty. Due to the specialized equipment necessary for testing a Laser-Radar receiver, there are no authorized service stations for Whistler brand detectors other than Whistler. When returning a unit for service under warranty, please follow these instructions: 1. Ship the unit in the original carton or in a

suitable sturdy equivalent, fully insured, with return receipt requested to:

Whistler Repair Dept. 551 N. 13th St.

Rogers, AR. 72756

Please allow 3 weeks turnaround time. Important: Whistler will not assume responsi- bility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted! 2. Include with your unit the following

information, clearly printed: Your name and street address (for shipping via UPS), a daytime telephone number and an email address, if applicable. A detailed description of the problem (e.g., Unit performs self-test but does not respond

` to radar). A copy of your dated store receipt or bill of sale.

WARRANTY INFORMATION 3. Be certain your unit is returned with its serial

number. For reference, please write your units serial number in the following space: s/n______________.

Units without serial numbers are not covered under warranty. Important: To validate that your unit is within the warranty period, make sure you keep a copy of your dated store receipt. You may register your warranty online at www.whistlergroup.com, however, for warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work.

Service Out of Warranty Units will be repaired at out of warranty service rates when:

The units original warranty has expired. A dated store receipt is not supplied. The unit has been returned without its serial

number. The unit has been abused, modified,

installed improperly, or had its housing removed.

The minimum out of warranty service fee for your Whistler detector is $55.00 (U.S.). If you require out of warranty service, please return your unit as outlined in the section Service Under Warranty along with a certified check or money order for $55.00. Payment may also be made by MasterCard, VISA or American Express; personal checks are not accepted. In the event repairs cannot be covered by the minimum $55.00 service fee, you will be con- tacted by a Whistler technical service special- ist who will outline options available to you. If you elect not to have your unit repaired, it will be returned to you along with your certified check or money order.

WARRANTY INFORMATION Important: When returning your unit for service, be certain to include a daytime telephone number and an email address (if applicable).

Customer Service If you have questions concerning the operation of your Whistler detector, or require service during or after the warranty period, please call Customer Service at:

1-800-531-0004 Representatives are available to answer your questions Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or visit the FAQs at www.whistlergroup.com.

SPECIFICATIONS Radar Frequencies: 10.500 - 10.550 GHz (X Band) 24.050 - 24.250 GHz (K Band ) 33.400 - 36.000 GHz (Ka Superwideband) Operating Temperature Range:-20 C to +80 C (-4 F to +176 F) Power Requirements: 3 AA Ni-MH batteries 1.2 volts each. 12 volts with power cord. One or more U.S. patents may apply: #5,146,227, #5,379,456, #5,666,120, #5,990,821, #7,215,276

POP Mode is a trademark of MPH Industries, Inc.

Specifications are subject to change without notice.

SWS is a trademark of Safety Warning System L.C.

WARRANTY INFORMATION These and other accessories can be ordered directly from Whistler by calling 1-800-531-0004 or visiting our online store at www.whistlergroup.com

Order # Description Price 202152 Windshield Bracket Kit $ 9.95

206552 Straight Power Cord (5) $14.95

206553 Coiled Power Cord (7) $15.95

206880 Hardwire Kit (10' ) $ 9.95 (for wiring to fuse box)

206666 Modular Cord Package $17.95 (includes coiled and straight cords, and power adapter)

402081 Non Skid Dash Pad $ 6.95

206660 Straight Modular Cord & $11.95 Socket Multiplier

206661 Coiled Modular Cord & $12.95 Socket Multiplier

500501 Zip

Manualsnet FAQs

If you want to find out how the XTR195 Whistler works, you can view and download the Whistler XTR195 Laser Radar Detector Owners Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Whistler XTR195 as well as other Whistler manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Whistler XTR195. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Whistler XTR195 Laser Radar Detector Owners Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Whistler XTR195 Laser Radar Detector Owners Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Whistler XTR195 Laser Radar Detector Owners Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Whistler XTR195 Laser Radar Detector Owners Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Whistler XTR195 Laser Radar Detector Owners Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.