Whistler Jump and Go Portable Jump Starter User Manual PDF

1 of 20
1 of 20

Summary of Content for Whistler Jump and Go Portable Jump Starter User Manual PDF

USER MANUAL

JUMP&GO Portable Jump Start

& Power Supply

2

Welcome Thank you for choosing a Whistler product. We are dedicated to providing products that represent both quality and value. Please read the USER Manual carefully before using this product. If you have additional questions, please visit the FAQ's page on our website at www.whistlergroup.com or call Toll Free (800)531-0004 / Tel (479)273-6012, 8am to 5pm CT, Monday through Friday to speak to a Customer Service Representative.

Packing List JUMP&GO Premium Protection Cables 12V DC Car Adapter Home AC Adapter USER Manual Zipper Storage Case

Feature Description

PRODUCT LAYOUT

2.1A USB Output Port

12V DC OUT HIGH CURRENT Jump Start Port

LED Power Indicator Lights

Power Button

12V DC IN Charging Port

Flashlight

3

Please read these safety instructions, operating instructions, and warnings before charging or using the JUMP&GO.

Explosion Hazard - USE ONLY IN WELL VENTILATED AREAS. The jump start cable clamps MUST be connected in correct polarity ~ RED clamp to the battery Positive (+) and BLACK clamp to the battery Negative (-) terminals, making sure they have a good connection. A reverse polarity connection (positive to negative) can cause damage to the JUMP&GO and/or create a sparking/explosion hazard.

Fire Hazard - Do not crush, puncture or damage the JUMP&GO. Never allow the jump start clamps to touch each other or another common metal conductor. This could cause damage to the unit and/or create a fire hazard. Always disconnect the jump start cables from the JUMP&GO after each use and store separately.

Burn Hazard - Keep away from children. Do not insert foreign objects into the jumper cables port/jack, the USB output port, or the DC input jack. Do not expose this product to water, rain, snow, condensation, or spray. Do not open the JUMP&GO to replace the internal battery. There are no user replaceable parts inside the JUMP&GO.

Additional Warnings 1. Keep the unit clear of fire and water.

2. USE ONLY THE WHISTLER PREMIUM PROTECTION CABLES. Use of other cables may result in damage to the JUMP&GO, fire, personal injury and damage to vehicle or property.

3. If at any time you witness the JUMP&GO starting to swell, smoke, or become hot to the touch, DISCONNECT THE JUMP&GO AND DISCON- TINUE USE IMMEDIATELY. Move JUMP&GO to a safe place away from combustible materials and safely observe it for approximately 15 minutes as a battery can still ignite after 10 minutes.

WARNINGS AND SAFETY GUIDELINES

4

Cautions 1. The JUMP&GO is intended for use on a discharged, but otherwise capable

battery. It will not work on a battery that has developed a shorted cell or become damaged. If vehicle cannot be jump started, have battery tested and/or replaced.

2. Before attempting to start 12V vehicle, please make sure at least 3 LED lights are illuminated on the JUMP&GO when pressing the power button.

3. Always use the JUMP&GO in a well ventilated area and keep the JUMP&GO away from children, fire, water, explosive gasses, and combustible materials.

4. DO NOT CRANK IGNITION FOR MORE THAN 3 SECONDS. Cranking for more than 3 seconds may cause damage to the unit. If vehicle does not start, wait 1 minute before trying again. The jump-start feature is designed for short term operation only. Refer to page 8 for additional information.

5. If the JUMP&GO becomes warm to the touch during use, disconnect the JUMP&GO from the cables and allow to cool before reattempting to start the vehicle.

6. When charging the JUMP&GO, please place on a hard surface and keep away from combustible materials. Please dont leave unattended while charging.

If you have questions concerning the operation of your Whistler product, or require service during or after the warranty period, please call Customer Service at Toll Free (800)531-0004 / Tel (479)273-6012.

CAUTIONS - PLEASE READ

5

BATTERY PRECAUTIONS

1. Lithium Polymer batteries are volatile. Failure to read and follow the use and operating instructions may result in fire, personal injury and damage to property if charged or used improperly. Li-Polymer battery may explode and cause fire if misused or defective. Please follow our jump starting Instructions exactly which are listed in the User Manual, label on the JUMP&GO, and the information card included.

2. Never allow a metal tool to concurrently touch the positive and negative cable ends or battery terminals.

3. Be sure someone is close enough to come to your aid when working with batteries.

4. If you need to remove a vehicle battery, always remove the negative terminal from the battery first. Make sure all accessories are off so you dont cause an arc.

5. When working with lead-acid vehicle batteries, have ample water, soap and baking soda on hand in case of skin contact with battery acid.

6. The JUMP&GO is supplied with an internal rechargeable Li-Polymer battery.

This battery is self-contained and not consumer replaceable. Battery must be disposed of properly when it no longer holds a charge. Proper charging practices will increase the life of the batteries. For information on battery recycling, go to www.call2recycle.org/locator, or contact them toll free at 800-822-8837 (automated system) or 877-273-2925 for www.call2recycle.org customer service.

6

Charging the JUMP&GO 1. Plug the home adaptor into a 100-240V AC outlet of the proper plug type. 2. Connect the other end of the home adaptor to the 12V DC IN Charging Port. -or- 1. Plug the car adaptor into the socket of the vehicle auxiliary power. 2. Connect the other end of the car adaptor to the 12V DC IN Charging Port.

(Refer to NOTE 3 below)

Indicator Lights Press the power button to check the level of the JUMP&GO battery. Number of lights ON indicate percentage of charge available. (1=20%, 2=40%, 3=60%, 4=80%, 5=100%)

NOTES: 1. The JUMP&GO should be charged before initial use. Place on a hard surface

and keep away from combustible materials. Please dont leave unattended while charging.

2. A minimum of 3 indicator lights must be illuminated before attempting to jump start a vehicle.

3. The JUMP&GO will flash all 5 battery indicators simultaneously and provide an audible beep if the input charging voltage is too low or too high. To prop- erty charge the JUMP&GO with the Car Charger, the DC input voltage should be 13.6 to 16 volts (Vehicle charging system when vehicle engine is running).

4. Periodic charging every 3-4 months is recommended when the JUMP&GO is being stored for long periods of time.

CHARGING

7

5. When charging, the LED indicator lights will sequentially flash. The percentage of charge completed is indicated by the number of solid lights as charging progresses. The JUMP&GO is fully charged when all lights are solid.

6. If during charging the JUMP&GO begins beeping and stops charging IMMEDIATELY DISCONNECT THE JUMP&GO FROM POWER SUPPLY AND DISCONTINUE USE. Refer to FAQs.

For Charging / Powering Devices Using USB Port 1. Plug the USB cable of the device into the USB output port of the JUMP&GO.

2. Press the JUMP&GO power button to initiate charging/ power to the attached device.

CHARGING

8

WARNING Explosion Hazard - USE ONLY IN WELL VENTILATED AREAS. The jump

start cable clamps MUST be connected in correct polarity ~ RED clamp to the battery Positive (+) and BLACK clamp to the battery Negative (-) terminals, making sure they have a good connection. A reverse polarity connection (positive to negative) can cause damage to the JUMP&GO and/or create a sparking/explosion hazard.

USE ONLY THE WHISTLER PREMIUM PROTECTION CABLES. Use of other cables may result in damage to the JUMP&GO, fire, personal injury and damage to vehicle or property.

For Jump Starting 12V Vehicle 1. Before attempting to start 12V vehicle, please make sure at least 3 LED lights

are illuminated on the JUMP&GO when pressing the power button.

2. Connect the Red clamp to the battery Positive (+) and Black clamp to the battery Negative (-) terminals, making sure they have a good connection. WARNING: REVERSING THE CONNECTIONS MAY RESULT IN DAMAGE TO THE JUMP&GO, FIRE OR PERSONAL INJURY.

3. Insert the blue connector firmly into the Jump Start port. (If below 32o F/0o C, please allow a few minutes before starting the vehicle)

4. Start the vehicle. CAUTION: DO NOT CRANK IGNITION FOR MORE THAN 3 SECONDS. If vehicle does not start, wait 1 minute before trying again.

5. Once vehicle is started, unplug the blue connector from the JUMP&GO, then remove the battery clamps.

JUMP STARTING

START

9

JUMP STARTING

CAUTION: The jump start feature is designed for short term operation only. Turn the ignition key for no more than 3 seconds at a time. Operating the jump start feature for more than 3 seconds may cause damage to the unit. Allow the JUMP&GO to cool down for at least 1 minute after each jump start attempt.

CAUTION: NEVER press the cable RESET button before having the cables properly connected to the vehicle battery. Failure to follow proper connection sequence outlined in JUMP STARTING section of this manual MAY RESULT IN DAMAGE TO THE JUMP&GO, TO THE VEHICLE, OR PERSONAL INJURY. Always disconnect the jump start cables from the JUMP&GO after each use and store separately.

The Premium Protection Cables provided have a built-in feature that prevents cranking for more than 3 seconds and will automatically enter a 60 second rest period between cranking attempts (indicated by cable LED blinking GREEN).

After 5 consecutive starting attempts, the Premium Protection Cables must be reset by pressing the RESET button before another starting attempt can be made. If the JUMP&GO becomes warm to the touch, disconnect the JUMP&GO from the cables and allow to cool before reattempting to start the vehicle. Please refer to Premium Protection Cable Operation on pages 10 & 11 for additional information.

Th e

JU M

P& G

O P

re m

iu m

P ro

te ct

io n

Ca bl

e O

pe ra

ti on

LE D

S ta

tu s

Co nd

iti on

D es

cr ip

tio n

A ct

io n

G RE

EN so

lid

Th e

JU M

P& G

O v

ol ta

ge a

bo ve

1 1V

, ve

hi cl

e ba

tt er

y ab

ov e

lo w

li m

it th

re sh

ol d,

a nd

c ab

le p

ol ar

ity c

or re

ct .

N O

TE : I

f n o

st ar

tin g

at te

m pt

is m

ad e

w ith

in 2

m in

. o f c

on ne

ct io

n to

v eh

ic le

ba

tt er

y: a

) l ig

ht w

ill re

m ai

n G

RE EN

. b)

li gh

t w ill

ch an

ge to

fa st

b lin

ki ng

AM

BE R

(s ee

b el

ow ).

c) li

gh t w

ill ch

an ge

to

so lid

A M

BE R

(s ee

b el

ow ).

Ve hi

cl e

m ay

n ow

a tte

m pt

to b

e st

ar te

d.

G RE

EN bl

in ki

ng

St ar

tin g

cu rr

en t d

et ec

te d

fo r

m ax

im um

3 s

ec on

ds , t

he n

en te

rs 6

0 se

co nd

re st

p er

io d,

w ith

n o

cu rr

en t

ou tp

ut a

llo w

ed .

Af te

r 6 0

se co

nd s,

LE D

w ill

in di

ca te

st

at us

. N O

TE : I

f n o

st ar

tin g

at te

m pt

w

as m

ad e,

ca bl

es d

et ec

te d

a he

av y

lo ad

fr om

v eh

ic le

sy st

em in

di ca

tin g

a de

fe ct

iv e/

da m

ag ed

v eh

ic le

b at

te ry

or

v eh

ic le

sy st

em is

su e

w hi

ch m

us t b

e re

so lv

ed b

ef or

e us

in g

th e

JU M

P& G

O .

H av

e ve

hi cl

e ba

tt er

y te

st ed

a nd

/o r

re pl

ac ed

.

G RE

EN fa

st bl

in ki

ng

Af te

r 5 c

on se

cu tiv

e st

ar tin

g at

te m

pt s

of 3

se c.

c ra

nk in

g/ 60

se c.

re st

c yc

le ,

no c

ur re

nt o

ut pu

t a llo

w ed

.

Pr es

s R ES

ET b

ut to

n to

in iti

at e

an ot

he r

5 st

ar tin

g at

te m

pt c

yc le

s.

10

Th e

JU M

P& G

O P

re m

iu m

P ro

te ct

io n

Ca bl

e O

pe ra

ti on

(c on

t'd fr

om p

g. 10

)

A M

BE R

so lid

Th e

JU M

P& G

O v

ol ta

ge is

lo w

er th

an

11 V

(3 b

ar s o

r l es

s o n

th e

JU M

P& G

O ).

N o

cu rr

en t o

ut pu

t a llo

w ed

a nd

RE

SE T

bu tt

on d

is ab

le d.

Fu lly

c ha

rg e

th e

JU M

P& G

O b

ef or

e at

te m

pt in

g to

s ta

rt v

eh ic

le .

A M

BE R

fa st

bl

in ki

ng

Th e

JU M

P& G

O v

ol ta

ge is

a bo

ve 1

1V

(3 b

ar s

or m

or e

on th

e JU

M P&

G O

), ve

hi cl

e ba

tt er

y no

t d et

ec te

d. N

o cu

rr en

t o ut

pu t a

llo w

ed . N

O TE

: Cl

am ps

a re

n ot

co nn

ec te

d to

v eh

ic le

ba

tt er

y or

v eh

ic le

b at

te ry

is b

el ow

lo w

lim

it th

re sh

ol d.

Ch ec

k fo

r s ec

ur e

ba tte

ry ca

bl e/

cl am

p co

nn ec

tio ns

to v

eh ic

le b

at te

ry . If

AM

BE R

lig ht

co nt

in ue

s t o

fa st

b lin

k,

pr es

s R ES

ET b

ut to

n fo

r v eh

ic le

b at

te ry

s

ys te

m ch

ec k

. N O

TE : A

v eh

ic le

b at

te ry

be

lo w

lo w

lim it

th re

sh ol

d m

ay n

ee d

to

be re

ch ar

ge d

or re

pl ac

ed .

A M

BE R

/G RE

EN al

te rn

at in

g bl

in ki

ng

In di

ca te

s 3 se

co nd

v eh

ic le

b at

te ry

s

ys te

m c

he ck

i n

pr og

re ss

a fte

r pr

es sin

g RE

SE T

bu tt

on w

he n

pr op

er ly

co

nn ec

te d

to a

v eh

ic le

b at

te ry

.

Af te

r sy

st em

ch ec

k , L

ED w

ill re

tu rn

w

ith sy

st em

st at

us co

nfi rm

at io

n. R

ef er

to

lis te

d LE

D S

ta tu

s f or

fu rt

he r a

ct io

ns .

RE D

fa st

b lin

ki ng

Th e

JU M

P& G

O v

ol ta

ge is

a bo

ve 1

1V ,

ca bl

es c

on ne

ct ed

in re

ve rs

e po

la rit

y or

v eh

ic le

b at

te ry

sh or

t d et

ec te

d. N

o cu

rr en

t o ut

pu t a

llo w

ed a

nd R

ES ET

bu

tt on

d is

ab le

d.

D isc

on ne

ct c

ab le

s f ro

m th

e JU

M P&

G O

an

d re

m ov

e cl

am ps

fr om

v eh

ic le

ba

tt er

y. Co

nn ec

t c la

m ps

to v

eh ic

le

ba tt

er y

in c

or re

ct p

ol ar

ity (p

os iti

ve -

to -p

os iti

ve /n

eg at

iv e-

to -n

eg at

iv e)

an

d th

en re

co nn

ec t c

ab le

s t o

th e

JU M

P& G

O to

re se

t. N

O TE

: S ou

rc e

of p

ro bl

em m

us t b

e r es

ol ve

d be

fo re

re

at te

m pt

in g

to st

ar t v

eh ic

le u

sin g

th e

JU M

P& G

O .

11

12

Flashlight LED Illumination Press and hold the power button for 3 seconds to initiate the flashlight. Once the flashlight is on, a press and release of the power button will change to an alternate mode of operation in the order listed below. To shut the flashlight off, you must cycle thru the selections.

FLASHLIGHT BEACON STROBE SOS OFF

FLASHLIGHT FUNCTION

13

Frequently Asked Questions Q: What may the JUMP&GO be used to jump start?

A: The JUMP&GO is for use on single battery 12V systems like GARDEN TRACTORS, ATVs, BOATS, MOTORCYCLES and PASSENGER VEHICLES (4, 6 and 8 cyl.)

Q: How to turn off the JUMP&GO?

A: The JUMP&GO will power off automatically when no load or charging is detected

Q: How many times can the JUMP&GO charge my mobile phone?

A: Approximately 7 times depending on phone

Q: How long will the JUMP&GO take to fully charge my mobile phone?

A: 1-2 hours depending on phone

Q: How many times can the fully charged JUMP&GO start the vehicle?

A: 10 times or more depending on vehicle

Q: How long will the JUMP&GO hold a charge?

A: The JUMP&GO will hold a charge up to 1 year (refer to Charging Section in manual)

FREQUENTLY ASKED QUESTIONS

14

Q: Why does the JUMP&GO stop charging and begin beeping?

A: The JUMP&GO has detected a problem with charging and has discontinued charging as a safety precaution.  Press and hold the power button for 10-30 seconds to force the continuation of charging and possibly correct the detected charging issue. After pressing and holding the power button, disconnect the charger from the wall and the JUMP&GO to reset. Reconnect charger to allow the unit to begin charging normally HOWEVER if after this process the unit again discontinues charging and begins to beep, IMMEDIATELY DISCONNECT THE JUMP&GO FROM POWER SUPPLY AND DISCONTINUE USE. NOTE: Pressing and holding the power button will cause the flashlight to turn ON which is normal. After disconnecting charger, the flashlight may be turned OFF before reconnecting

Q: Why does the JUMP&GO not indicate charging when using a vehicle power port adapter?

A: Start the vehicle to provide adequate voltage for charging (refer to page 6)

Q:  How do I dispose of the JUMP&GO when it reaches end of service life?

A:  The JUMP&GO contains a rechargeable Lithium Polymer (LiPo) battery pack. This battery pack is self-contained and is not replaceable. Refer to page 5 for battery disposal information

FREQUENTLY ASKED QUESTIONS

15

SPECIFICATIONS

SPECIFICATIONS SIZE: 130mm x 78mm x 24mm (5.1 x 3.0 x 0.9)

WEIGHT: <1 lb. with silicone cover

BATTERY CAPACITY: 33300 mWh

OUTPUT: 5V=2.1A; 12V=HIGH CURRENT*

INPUT: 12V < 2A

FULL CHARGING TIME: 3-4 hours

*STARTING CURRENT: 200A (< or = 3 second)

*PEAK CURRENT: 400A (inrush current)

OPERATING TEMP (Charge): 0o~ 40o C (32o~ 104o F)

OPERATING TEMP (Discharge): -20o~ 60o C (-4o~ 140o F)

STORAGE TEMP: -10o ~ 30o C (14o~ 86o F)

LIFETIME: >1000 Cycles depending on usage

16

WARRANTY INFORMATION

Consumer Warranty This Whistler product is warranted to the original purchaser for a period of one (1) year from the date of original purchase against all defects in materials and workmanship, when purchased from an authorized Whistler retailer. This limited warranty is void if the unit is abused, misused, modified, installed improperly, or if the housing and/or serial numbers have been removed. There are no express warranties covering this product other than those set forth in this warranty. All express or implied warranties for this product are limited to one (1) year. Whistler is not liable for damages arising from the use, misuse, or operation of this product including but not limited to loss of time, inconvenience, loss of use of your product or property damage caused by your product or its failure to work, or any other incidental or consequential damages including personal injury.

DO NOT RETURN ITEM TO STORE WHERE PURCHASED. FOR WARRANTY INFORMATION, CONTACT WHISTLER CUSTOMER SERVICE AT

Toll Free (800)531-0004 / Tel (479)273-6012.

Representatives are available to answer your questions Monday Friday from 8:00 a.m. to 5:00 p.m. CT

Service Under Warranty During the warranty period, defective units will be repaired or replaced (with the same or a comparable model), at Whistlers option, without charge to the purchaser when returned prepaid, with dated proof of purchase to the address below. Units returned without dated proof of purchase will be considered out of warranty and therefore are not covered by the described Limited Warranty. (Refer to Service Out of Warranty section.) Due to the specialized equipment necessary for testing Whistler products, there are no authorized service centers other than Whistler. When returning a unit for service under warranty, please follow these instructions:

1. Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with return receipt requested to:

Whistler Repair Dept. 1412 South 1st St. Rogers, AR. 72756

Please allow 3 weeks turnaround time.

17

WARRANTY INFORMATION

IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted!

2. Include with your unit the following information, clearly printed: Your name and physical street address for shipping (no PO Boxes), a

daytime telephone number, and an email address (if applicable). A detailed description of the problem (e.g.,device will not power ON). A copy of your dated proof of purchase or bill of sale.

3. Be certain your unit is returned with its serial number. Units without serial numbers are not covered under warranty.

IMPORTANT: To validate that your unit is within the warranty period, make sure you keep a copy of your dated proof of purchase. For warranty verification purposes, a copy of your dated store receipt must accompany any Whistler product sent in for warranty work.

Service Out Of Warranty Units will be repaired at out of warranty service rates when:

The units original warranty has expired. A dated proof of purchase is not supplied. The unit has been returned without its serial number. The unit has been misused, abused, modified, installed improperly, or

had its housing removed.

The minimum out of warranty service fee for your Whistler JUMP&GO is $50.00 (U.S.). If you require out of warranty service, please return your unit as outlined in the section Service Under Warranty along with a cashiers check or money order in the amount of $50.00. Payment may also be made by MasterCard, VISA or American Express. Personal checks are not accepted.

18

WARRANTY INFORMATION

In the event repairs cannot be covered by the minimum service fee, you will be contacted by a Whistler technical service specialist who will outline options available to you.

IMPORTANT: When returning your unit for service, be certain to include a daytime telephone number and an email address (if applicable).

Customer Service If you have questions concerning the operation of your Whistler product, or require service during or after the warranty period, please call Customer Service at Toll Free (800)531-0004 / Tel (479)273-6012.

Representatives are available to answer your questions Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or visit the FAQ's at www.whistlergroup.com.

CORPORATE HEADQUARTERS 1716 SW Commerce Dr. Ste. 8 Bentonville, AR 72712 Toll Free (800) 531-0004 TEL (479) 273-6012 www.whistlergroup.com

CUSTOMER RETURN CENTER 1412 South 1st St. Rogers, AR 72756 Email: info@whis

Manualsnet FAQs

If you want to find out how the Jump and Go Whistler works, you can view and download the Whistler Jump and Go Portable Jump Starter User Manual on the Manualsnet website.

Yes, we have the User Manual for Whistler Jump and Go as well as other Whistler manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Whistler Jump and Go. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Whistler Jump and Go Portable Jump Starter User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Whistler Jump and Go Portable Jump Starter User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Whistler Jump and Go Portable Jump Starter User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Whistler Jump and Go Portable Jump Starter User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Whistler Jump and Go Portable Jump Starter User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.