Whistler WIC2750 Wireless Inspection Camera Owners Manual PDF

1 of 16
1 of 16

Summary of Content for Whistler WIC2750 Wireless Inspection Camera Owners Manual PDF

CORPORATE HEADQUARTERS 1716 SW Commerce Dr. Ste. 8 Bentonville, AR 72712 Toll Free (800) 531-0004 TEL (479) 273-6012 FX (479) 273-2927 www.whistlergroup.com

CUSTOMER RETURN CENTER 551 N. 13th St. Rogers, AR 72756 Consumer Service Tel (800) 531-0004 Email: info@whistlergroup.com

P/N 2014 The Whistler Group, Inc.

OWNERS MANUAL

Wireless Inspection Camera With Color LCD Monitor

WIC2750

TABLE OF CONTENTS

Welcome ...................................................................... 1 Packing List .................................................................. 2 Component / Controls ................................................. 3 Installation .................................................................... 4 Operation .................................................................... 6 Caution ........................................................................ 8 FCC Information ......................................................... 8 Troubleshooting ........................................................... 9 Specifications .............................................................10 Warranty ..................................................................... 11

Welcome Congratulations on your purchase of our inspection video camera with color LCD monitor with video out capabilities. Please read the user manual carefully before using this product. This product is designed as a remote inspection device, appropriate for use in surveying pipes or other hard-to-reach places, equipment or furnishing installation, car repair, etc.

If you have any question concerning the operation of this Whistler product please call:

Customer Service 1-800-531-0004

Monday - Friday 8:00AM - 5:00PM CT or visit:

www.whistlergroup.com

Please keep your purchase receipt in a safe place. You may register your product online at www.whistlergroup.com. For warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work. If the unit is returned without a dated store receipt, an out of warranty service charge will be applied. Note: Your warranty period begins at the time of purchase. The warranty is validated only by dated store receipt! Please record the serial numbers (located on the back on the monitor and bottom of the handheld unit) in the space provided in the warranty section of this manual.

Enjoy your Whistler Inspection Camera.

Sincerely,

The Whistler Group, Inc.

Packing List

INTRODUCTION

9mm Camera with 3.3 ft. Tube

3.3 ft. Extension Tube

Accessory Collar

Handheld Unit

Video Cable

2.7 in. LCD Monitor

Power Adapter

Magnet Accessory

Clip

Mirror Accessory

Clip

Hook Accessory

Clip

2

Camera Unit

Monitor

FEATURE DESCRIPTION

3.3 ft. Camera Tube

Power Indicator

Power Indicator

2.7in. LCD Display

Contrast

Brightness ZoomImage

Rotation Power ON / OFF

Signal Output

9mm Camera Lens with LEDS

Power ON / OFF LED Brightness Control

3

Installing the Camera Flexible Tube When connecting the camera tube to the handheld unit, make sure that the keyed ends are properly aligned. Once they are lined up, finger tighten the knob to hold the connector in place.

Install the Accessories The three (3) included accessories (mirror, hook and magnet) are all attached to the tube in the same way as illustrated below:

Place hook into hole at end of tube. Place rubber ring around camera head and hook.

INSTALLATION

4

Keyed end plugs into socket

Finger tighten the knurled knob

Install Monitor for Wired Use This product also supports wired use by connecting the monitor to the camera.

Connect AC Adapter Connect the adapter to the monitor and then plug the adapter into a wall outlet. The power indicators on the handheld unit and the monitor will light red, which indicates the monitor and the handheld unit are charging at the same time and they will turn off after fully charged. The product can be used while charging.

NOTE: Monitor must be attached to handheld unit when charging.

Video Out Insert the video cable into the Video Out jack on the side of the unit. Insert the other end of the video cable to a video in on a TV or other video monitor system. The unit will provide high quality video to an external monitor.

INSTALLATION

5

Operation Rotate the ON/OFF switch to turn on the camera. The power indicator on top of the handheld unit will illuminate. The switch then acts as a dimmer of the LEDs, that surrounds the camera and provide high quality lighting.

Press and hold on the Power ON/OFF button on monitor for 2 seconds, the power indicator will be green and the picture will display on LCD display.

Rotate the ON/Off switch to adjust the display brightness.

OPERATION

6

OPERATION

7

To orientate the images displayed on LCD display, press the button. Image orientation as below:

Press the button to digital zoom the image. Zoom capacity of 1.5x, 2x and 3x.

Gently guide the tube into the desired location. Slight adjustments can be made while maneuvering the head in a forward direction.

IMPORTANT: The flexible tube can be bent to accommodate exploration in a variety of locations.

The accessories can be used to retrieve small items such as screws or rings.

FCC INFORMATION

8

CAUTION: Do not expose the monitor or handheld unit dripping or

splashing liquids. Turn off camera and monitor when not in use. Use only the AC adaptor and cable supplied with the unit. Properly dispose of the batteries. Exposure to high

temperatures can cause the batteries to explode. Do not dispose of the batteries in a fire. When stored, place tape over the terminals to prevent direct contact with other objects. Some countries have regulations concerning battery disposal. Please follow all applicable regulations.

FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT: FCC requirements state that changes or modifications not expressly approved by Whistler could void the users authority to operate the equipment.

FCC ID: TW5GB8863

TROUBLESHOOTING

Troubleshooting

Why wont the monitor turn on? Make sure that the monitor has been charged at least overnight before

first use. Press the reset button on the unit.

Message on monitor says to See Manual for Troubleshooting. Make sure that the handheld unit is turned on and that the camera tube

is properly attached to the handheld unit.

The power light comes on but nothing shows on the screen? This could be due to weak batteries in the handheld. Replace batteries. Is the camera tube fully inserted to the handheld unit? When connecting

the camera tube to the handheld unit, make sure the keyed ends are properly aligned. Once they are lined up, press in firmly and then finger tighten the knob to hold the connector in place.

Why is my picture upside down? Simply press the image orientation button or move the camera tube to

properly orient the image.

What is the maximum depth the waterproof camera can be submerged? Approximately 12 feet - the camera extension limit of the unit. Camera

tube has a rating of IP67.

Why does the video look Scrambled? There are two video formats that the inspection camera can be set to:

NTSC format which is used in North America. The PAL format is used in Europe and other overseas countries. Enter the menu selection and check the video format to make sure the monitor is in NTSC format.

What format are the pictures and movies saved as? Still images are saved in a .jpg format. Movies are saved in a .avi format,

with video resolution at 640x480 pixels.

Video Output, will display live video or will it only display playback of recorded video?

When connected to a different monitor the unit will display live video as well as picture and recorded playback.

9

SPECIFICATIONS

10

WIC2750

WARRANTY

Consumer Warranty This Whistler product is warranted to the original purchaser for a period of one (1) year from the date of original purchase against all defects in materials and workmanship, when purchased from an authorized Whistler retailer. This limited warranty is void if the unit is abused, misused, modified, installed improperly, or if the housing and/or serial numbers have been removed. There are no express warranties covering this product other than those set forth in this warranty. All express or implied warranties for this product are limited to one (1) year. Whistler is not liable for damages arising from the use, misuse, or operation of this product including but not limited to loss of time, inconvenience, loss of use of your product or property damage caused by your product or its failure to work, or any other incidental or consequential damages including personal injury.

DO NOT RETURN ITEM TO STORE WHERE PURCHASED. FOR WARRANTY INFORMATION, CONTACT WHISTLER CUSTOMER

SERVICE AT 1-800-531-0004. Representatives are available to answer your questions Monday Friday

from 8:00 a.m. to 5:00 p.m. CST

Service Under Warranty During the warranty period, defective units will be repaired or replaced (with the same or a comparable model), at Whistlers option, without charge to the purchaser when returned prepaid, with dated proof of purchase to the address below. Units returned without dated proof of purchase will be considered out of warranty and therefore are not covered by the described Limited Warranty. (Refer to Service Out of Warranty section.) Due to the specialized equipment necessary for testing Whistler products, there are no authorized service centers other than Whistler. When returning a unit for service under warranty, please follow these instructions:

11

WARRANTY

1. Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with return receipt requested to:

Whistler Repair Dept. 551 N. 13th St.

Rogers, AR. 72756

Please allow 3 weeks turnaround time.

IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted!

2. Include with your unit the following information, clearly printed: Your name and physical street address for shipping (no PO Boxes),

a daytime telephone number, and an email address (if applicable). A detailed description of the problem (e.g.,device will not

power ON). A copy of your dated proof of purchase or bill of sale.

3. Be certain your unit is returned with its serial number. Units without serial numbers are not covered under warranty.

IMPORTANT: To validate that your unit is within the warranty period, make sure you keep a copy of your dated proof of purchase. For warranty verification purposes, a copy of your dated store receipt must accompany any Whistler product sent in for warranty work.

Service Out Of Warranty Units will be repaired at out of warranty service rates when:

The units original warranty has expired. A dated proof of purchase is not supplied. The unit has been returned without its serial number. The unit has been misused, abused, modified, installed

improperly, or had its housing removed.

12

WARRANTY

The minimum out of warranty service fee for your Whistler WIC2750 is $75.00 (U.S.). If you require out of warranty service, please return your unit as outlined in the section Service Under Warranty along with a cashiers check or money order in the amount of $75.00. Payment may also be made by MasterCard, VISA or American Express. Personal checks are not accepted.

In the event repairs cannot be covered by the minimum service fee, you will be contacted by a Whistler technical service specialist who will outline options available to you.

IMPORTANT: When returning your unit for service, be certain to include a daytime telephone number and an email address (if applicable).

Customer Servi

Manualsnet FAQs

If you want to find out how the WIC2750 Whistler works, you can view and download the Whistler WIC2750 Wireless Inspection Camera Owners Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Whistler WIC2750 as well as other Whistler manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Whistler WIC2750. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Whistler WIC2750 Wireless Inspection Camera Owners Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Whistler WIC2750 Wireless Inspection Camera Owners Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Whistler WIC2750 Wireless Inspection Camera Owners Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Whistler WIC2750 Wireless Inspection Camera Owners Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Whistler WIC2750 Wireless Inspection Camera Owners Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.