Volvo V50 2005 Owners Manual PDF

1 of 228
1 of 228

Summary of Content for Volvo V50 2005 Owners Manual PDF

2005

V50 VOLVO

2 0

0 5

TP 7482 (English). AT 0446. Printed in Sweden, Elanders Infologistics Vst AB, Mlnlycke 2004

T P

7 4

8 2

V O

LV O

V 5

0 O

W N

E R

'S M

A N

U A

L

WEB EDITION

1

Introduction

Dear Volvo owner We hope you will enjoy many years of driving pleasure in your Volvo. The car has been designed for the safety and comfort of you and your passengers. Volvo is one of the safest cars in the world. Your Volvo has also been designed to satisfy all current safety and environmental requirements.

In order to increase your enjoyment of the car, we recommend that you familiarise yourself with the equipment, instructions and maintenance information contained in this owners manual.

Thank you for choosing Volvo!

V50 book w446.book Page 1 Thursday, September 9, 2004 10:27 AM

2

Introduction

Owners Manual A good way of getting to know your new car is to read the owners manual, ideally before your first journey. This will give you the oppor- tunity to familiarise yourself with new func- tions, to see how best to handle the car in dif- ferent situations, and to make the best use of all the cars features. Please pay attention to the safety instructions contained in the manual:

The equipment described in the owners manual is not present in all models. In addi- tion to standard equipment, this manual also describes options (factory fitted equipment) and certain accessories (extra equipment).

NOTE! Volvo cars are adapted for the varying requirements of different markets, as well as

for national or local legal requirements and regulations.

The specifications, design features and illus- trations in this owners manual are not bind- ing. We reserve the right to make modifica- tions without prior notice.

Volvo Car Corporation

WARNING! "Warning!" texts indicate where there is a risk of personal injury in the event of the instructions not being followed.

Important! "Important!" texts indicate a risk of damage to the car in the event of the instructions not being followed.

V50 book w446.book Page 2 Thursday, September 9, 2004 10:27 AM

3

Volvo Cars and the environment

Volvo Cars and the environment

Our environmental philosophy Quality, Safety and Environmental care are the three core values which guide all the activities of Volvo Cars. Volvo cars comply with strict international environmental stand- ards and are manufactured in some of the cleanest and most resource-efficient plants in the world. Volvo Cars has been awarded multi-site global certification under the ISO 14001 environmental standard, ensuring continuous improvement in the area. All Volvo models are supplied with an environmental product declaration - or EPD - which enables the customer to compare the environmental performance of different models and engines. Visit epd.volvocars.se for more information.

Clean inside and out Your Volvo is designed to be clean inside and out, a concept which means that you benefit in two ways - from a clean cabin and a highly efficient exhaust treatment system, which ensures that your car saves fuel and releases a minimum of harmful substances. Inside, the air entering the passenger com- partment is filtered to protect you and your passengers from dust, particles and pollen. A sophisticated air quality system known as IAQS1 can be added as an option to ensure that the air supplied to the passenger com- partment is cleaner than the air outside. Con- sisting of an electronic sensor and an acti- vated carbon filter, the system monitors the

level of carbon monoxide in the incoming air and closes the air intakes to prevent the level in the cabin from becoming too high - for example in heavy city traffic, tailbacks and tunnels - while the carbon filter traps nitrogen oxides, ground-level ozone and hydrocar- bons. In addition, to benefit allergy sufferers, the fabrics used in the interior comply with the provisions of the international ko-Tex2 standard. Outside, a special catalytic coating

known as PremAir3 is used to convert harm- ful ground-level ozone in the air passing through the radiator into pure oxygen.

1. Interior Air Quality System

2. An international ecological standard for textiles

3. Applies only to five-cylinder engines PremAir is a registered trademark of Engelhard Corporation

V50 book w446.book Page 3 Thursday, September 9, 2004 10:27 AM

4

Volvo Cars and the environment

Volvo Cars and the environment

A Volvo meets strict international environ- mental demands and delivers low fuel con- sumption to reduce emissions of greenhouse carbon dioxide. In terms of fuel economy, Volvo cars are highly competitive in their respective segments.

Volvo workshops and the environment Regular maintenance carried out by an authorised Volvo workshop creates the con- ditions for low fuel consumption and contrib- utes to a cleaner environment. Volvo service technicians are equipped with the knowhow and tools to ensure that your car delivers the best possible environmental performance.

Reducing environmental impact We believe that our customers share our concern for the environment. You can con- tribute to improving the environment by using only ecologically approved car care products, and by ensuring that your car is serviced and maintained according to the instructions in the owner's manual.

The following hints will help you to do your bit for the environment:

Always ensure that your tyre pressures are correct. Poorly inflated tyres increase fuel consumption.

Since roof racks and ski boxes increase air resistance, leading to significantly higher fuel consumption, they should be removed immediately after use.

Remove unnecessary items from the car - the greater the load the higher the fuel consumption.

Is your car equipped with an engine block heater? If so, use it for a few hours before starting from cold to reduce fuel con- sumption and exhaust emissions.

Drive gently! Avoid accelerating and brak- ing too hard.

Drive in the highest pos- sible gear - lower engine revs reduce fuel con- sumption.

Ease back on the accel- erator on downhill gradients.

Use engine braking. Take your foot off the accelerator and change down.

Avoid idling. Switch off the engine in traf- fic queues.

Always dispose of envi- ronmentally hazardous waste, such as batter- ies and oils, in an envi- ronmentally safe man- ner. If uncertain, ask your authorised Volvo workshop for advice.

Service your car regularly. These hints will help you to reduce your fuel consumption without increasing your travel time or lessening the enjoyment of driving. Apart from being kind to your car, you'll be saving money - and the Earth's resources.

V50 book w446.book Page 4 Thursday, September 9, 2004 10:27 AM

5

Contents

Instrument overview 7 Safety 13 Instruments and controls 37 Climate control 65 Interior 77 Locks and alarm 91 Starting and driving 103 Wheels and tyres 135 Car care 151 Maintenance and service 157 Infotainment system 181 Technical data 209

V50 book w446.book Page 5 Thursday, September 9, 2004 10:27 AM

6

V50 book w446.book Page 6 Thursday, September 9, 2004 10:27 AM

7

Instrument overview Overview, left-hand drive car 8 Overview, right-hand drive car 10 Drivers door control panel 12

V50 book w446.book Page 7 Thursday, September 9, 2004 10:27 AM

8

Instrument overview

Overview, left-hand drive car

Left-hand drive

V50 book w446.book Page 8 Thursday, September 9, 2004 10:27 AM

9

Instrument overview

1. Steering wheel adjustment 2. Bonnet release 3. Control panel 4. Direction indicators, main beam, trip

computer 5. Lighting, fuel filler flap opener 6. Door handle, central locking 7. Air vents in dashboard 8. Air vent for side window 9. Cruise control 10. Horn, airbag 11. Combined instrument panel 12. Keypad for infotainment system 13. Windscreen wipers and washers,

headlamp washers 14. Ignition switch 15. Interior rearview mirror 16. Seatbelt reminder 17. Interior lighting for left-hand side 18. Deactivation of alarm detectors,

deadlocks 19. Switch for interior lighting 20. Position of accessory switch 21. Interior lighting for right-hand side 22. Sunroof controls 23. Display for climate control and

infotainment system 24. Infotainment system

25. Controls for climate control, infotainment system and personal preferences

26. Climate control 27. Gear lever 28. Hazard warning flashers 29. Door handle 30. Glovebox 31. Parking brake 32. Electrical socket/cigarette lighter 33. STC or DSTC stability system 34. Switch, optional equipment

V50 book w446.book Page 9 Thursday, September 9, 2004 10:27 AM

10

Instrument overview

Overview, right-hand drive car

Right-hand drive

V50 book w446.book Page 10 Thursday, September 9, 2004 10:27 AM

11

Instrument overview

1. Switch for retrofitted accessory 2. STC or DSTC stability system 3. Electrical socket, cigarette lighter 4. Parking brake 5. Control panel 6. Glovebox 7. Door handle 8. Air vent for side window 9. Air vents in dashboard 10. Gear lever 11. Climate control 12. Controls for climate control,

infotainment system and personal preferences

13. Infotainment system 14. Display for climate control and

infotainment system 15. Sunroof controls 16. Interior lighting for left-hand side 17. Deactivation of alarm detectors,

deadlocks 18. Switch for interior lighting 19. Switch for retrofitted accessory 20. Interior lighting for right-hand side 21. Seatbelt reminder 22. Interior rearview mirror 23. Ignition switch 24. Windscreen wipers and washers,

headlamp washers

25. Cruise control 26. Combined instrument panel 27. Horn, airbag 28. Keypad for infotainment system 29. Hazard warning flashers 30. Door handle, central locking 31. Lighting, fuel filler flap opener 32. Direction indicators, main beam, trip

computer 33. Bonnet release 34. Steering wheel adjustment

V50 book w446.book Page 11 Thursday, September 9, 2004 10:27 AM

12

Instrument overview

Drivers door control panel

1. Blocking switch for rear power windows (standard) Electric child locks (option)

2. Power windows 3. Door mirror, left-hand side 4. Door mirrors, setting 5. Door mirror, right-hand side

V50 book w446.book Page 12 Thursday, September 9, 2004 10:27 AM

13

Safety Seatbelts 14 Airbags (SRS) 17 Activating/deactivating the airbag (SRS) 20 Side airbags (SIPS) 22 Inflatable Curtain (IC) 24 WHIPS 25 When are the safety systems activated? 27 Crash mode 28 Inspecting the airbags and inflatable curtains 29 Child safety 30

V50 book w446.book Page 13 Thursday, September 9, 2004 10:27 AM

14

Safety

Seatbelts

Tensioning the hip strap. The belt must be positioned low down.

Always use a seatbelt Heavy braking can have serious conse- quences if the seatbelts are not used. Ensure that all passengers use their seatbelts. Otherwise, rear seat passengers may be thrown forward against the backs of the front seats in a collision.

Putting on a seatbelt:

Pull the belt out slowly and secure it by pressing the buckle into the lock. A loud "click" indicates that the belt has locked.

Releasing the belt:

Press the red lock button and let the belt retract. If the belt does not retract fully, feed the belt in by hand so that it does not hang lose.

The belt locks and cannot be withdrawn:

if it is pulled out too quickly. during braking and acceleration. if the car leans heavily. It is important that the belt lies against the body so it can provide maximum protection. Do not lean the backrest too far back. The seatbelt is designed to protect in a normal seating position.

Keep the following in mind:

do not use clips or anything else that can prevent the belt from fitting properly.

ensure the belt is not be twisted or caught on anything.

the hip strap must be positioned low down (not over the abdomen).

tension the hip strap over the lap by pulling the diagonal shoulder belt as illus- trated.

WARNING! The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this may diminish the protection provided by the airbag in the event of a collision.

WARNING! Each belt is intended for one person only.

WARNING! If the belt has been subjected to a major load, such as in a collision, the entire belt must be replaced. This includes the reel, mountings, bolts and buckles. Some of the protective characteristics of the belt may have been lost, even if it appears to be undamaged. Replace the seatbelt if the belt is worn or damaged. The new seatbelt must be type-approved and intended for installation in the same position as the replaced belt. Never modify or repair the seatbelts yourself. Contact an authorised Volvo workshop.

V50 book w446.book Page 14 Thursday, September 9, 2004 10:27 AM

15

Safety

Seatbelt reminder1

A symbol lights up in the roof console (above the rearview mirror) as a reminder that the seatbelts are not buckled up. A symbol also lights up on the combined instrument panel. If the car is stationary, the reminder is extin- guished after approximately six seconds.

Front seat The symbols remain lit as long as the driver or front seat passenger do not have their seatbelts on. (If a child seat is place on the front seat, the reminder does not come on.) In addition to the two symbols, an audible

reminder is heard that changes frequency with the speed of the car.

Rear seat The seatbelt reminder has two sub-functions:

Notifies of the number of seatbelts being used via a message on the information display. This function is automatically activated as soon as a rear door is opened and closed, even if no one is actually sitting in the rear seat. The message is automatically erased approx. 10 seconds after the car is driven away, or can be acknowledged manually by pressing the READ button.

Warns that someone in the rear seat has removed their seatbelt while the car is moving. A message appears on the infor- mation display and an audible warning sounds. The warning ceases once the belt has been put back on, or can be acknowledged manually by pressing the READ button.

The message on the display that states how many seatbelts are in use can be viewed at any time. To read saved messages, press the READ button.

Seatbelts and pregnancy It is extremely important that the seatbelt is used correctly during pregnancy. It should be in contact with the body. The upper part of the seatbelt should fit between the breasts and against the side of the abdomen. The hip section of the seatbelt must be flat and as far under the abdomen as possible. It must not slide up towards the abdomen.

An expectant mother who is driving should move the seat as far back as possible in order to obtain the greatest possible distance between the steering wheel and the abdomen. Set the steering wheel as far forward as a comfortable driving position permits.1. Function can depend on market

V50 book w446.book Page 15 Thursday, September 9, 2004 10:27 AM

16

Safety

Seatbelts

Label on seatbelts with seatbelt tensioner

Seatbelt tensioner All the seatbelts (except the centre rear belt) are equipped with belt tensioners. A mechanism in the belt tensioner tightens the belt around the body in the event of a suffi- ciently violent collision. This provides more effective restraint for passengers.

V50 book w446.book Page 16 Thursday, September 9, 2004 10:27 AM

17

Safety

Airbags (SRS)

Airbag (SRS) on the drivers side The car has an SRS airbag (Supplemental Restraint System) in the steering wheel to supplement the protection afforded by the seatbelt. This airbag is fitted into the centre of the steering wheel. The steering wheel is marked SRS AIRBAG.

Passenger airbag (SRS) The passenger airbag1 is fitted behind a panel above the glovebox. This panel is marked SRS AIRBAG

WARNING! The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this may diminish the protection provided by the airbag in the event of a collision. 1. Not all cars have a passenger airbag

(SRS). This can be unselected when the car is ordered.

WARNING! To minimise the risk of injury if the airbag deploys, passengers must sit as upright as possible with their feet on the floor and backs against the backrest. Seatbelts must be secured.

WARNING! Never place a child in a child seat or on a booster cushion in the front seat if the airbag (SRS) is activated.1

Never allow a child to stand or sit in front of the front passenger seat. No one shorter than 140 cm (4 ft 11) should sit in the front passenger seat if the airbag (SRS) is activated. Failure to follow the advice given above can endanger the life of the child.

1. For information on activated/deactivated airbag (SRS), see page 20.

V50 book w446.book Page 17 Thursday, September 9, 2004 10:27 AM

18

Safety

Airbags (SRS)

Location of the passenger airbag in left-hand drive and right-hand drive cars

Warning symbol on the combined instrument panel The AIRBAG system is monitored continu- ously by the cars electronic control system. The warning symbol on the combined instrument panel lights when the ignition key is turned to position I, II or III. The symbol goes out after about six seconds if the AIRBAG system is working correctly.

As well as the warning symbol, a message appears on the information display. If the warning symbol malfunc- tions, the warning triangle comes on and the message SRS AIRBAG SERVICE URGENT appears on the display. Contact an

authorised Volvo workshop immediately.

WARNING! Objects and accessories must not be positioned or glued on or near the SRS AIRBAG panel (above the glovebox) or in the area affected by a deployed airbag. Never interfere with SRS components in the steering wheel or the panel above the glovebox.

WARNING! If the warning symbol for the AIRBAG system remains on or comes on while driving, it means that the AIRBAG system is not functioning fully. The symbol can indicate a fault in the seatbelt buckle, SIPS, SRS or IC system. Contact an authorised Volvo workshop immediately.

V50 book w446.book Page 18 Thursday, September 9, 2004 10:27 AM

19

Safety

SRS system, left-hand drive

SRS system The SRS system consists of a gas generator surrounded by an inflatable airbag. A suffi- ciently violent collision trips sensors and ignites the gas generator, inflating the airbag with hot gas. To cushion the impact, the airbag deflates when compressed. When this occurs, smoke escapes into the car. This is completely normal. The entire process, including inflation and deflation of the airbag, occurs within tenths of a second.

SRS system, right-hand drive. NOTE! The sensors react differently depending on the course of the collision and whether the seatbelts on the driver and passenger side are used. It is therefore possible that only one (or none) of the airbags may inflate in a collision. The SRS system senses the force of the collision on the car and adapts accordingly so that one or more airbags is deployed.

Airbags (SRS) NOTE! The airbags have a function whereby their capacities are adapted to the collision force to which the vehicle is subjected.

WARNING! Work on the SRS system can cause malfunction and result in serious personal injury. Repairs must only be performed by an authorised Volvo workshop.

V50 book w446.book Page 19 Thursday, September 9, 2004 10:27 AM

20

Safety

Activating/deactivating the airbag (SRS)

Indicator showing that the passenger airbag (SRS) is deactivated.

PACOS (option) The airbag (SRS) for the front passenger seat can be deactivated. This is necessary if a child seat is to be placed there.

Indicator A text message on the roof panel indicates that the passenger airbag (SRS) is deacti- vated.

PACOS (Passenger Airbag Cut-Off Switch) Activating/deactivating The switch is located on the passenger end of the dashboard and is accessible when the passenger door is open. Check that the switch is in the required position. Volvo recommends that that the ignition key is used to change position. (Other items with a shape similar to a key can be used.)

WARNING! Activated airbag (passenger seat): Never place a child in a child seat or on a booster cushion in the front passenger seat. This also applies to persons shorter than 140 cm (4 ft 7). Deactivated airbag (passenger seat): Persons taller than 140 cm (4 ft 7) must never sit in the passenger seat. Failure to follow the advice given above can endanger life.

WARNING! If the car is equipped with a front passenger airbag (SRS), but does not have PACOS, the airbag will always be activated.

V50 book w446.book Page 20 Thursday, September 9, 2004 10:27 AM

21

Safety

Switch for SRS in ON position.

Switch position ON = Airbag (SRS) activated. With the switch in this position, persons taller than 140 cm (4 ft 7) can sit in the front passenger seat, but never children in a child seat or on a booster cushion.

Switch for SRS in Off position. OFF = Airbag (SRS) is deactivated. With the switch in this position, children in a child seat or on a booster cushion can sit in the front passenger seat, but never persons taller than 140 cm (4 ft 7).

WARNING! Do not allow anyone to sit in the front passenger seat if the text message in the roof panel indicates that the airbag (SRS) is deactivated and the airbag warning symbol is displayed in the combined instrument panel. This indicates that there has been a severe malfunction. Contact an authorised Volvo workshop as soon as possible.

V50 book w446.book Page 21 Thursday, September 9, 2004 10:27 AM

22

Safety

Side airbags (SIPS)

Side airbag locations.

Side airbags SIPS bags A large proportion of the collision force is transferred by the SIPS to the floor, roof, beams, pillars, and other structural parts of the body. The side airbags on the driver and front passenger seats protect the chest area and are an important part of the SIPS. The SIPS bag system consists of two main parts: The side airbags and the sensors. The side airbags are located in the front seat backrests.

Child seats and side airbags The side airbag does not diminish the protection provided by the car to children seated in a child seat or on a booster cushion.

A child seat or booster cushion can be placed on the front passenger seat provided that the car does not have an activated1 passenger airbag.

Side airbags are a supplement to the SIPS system. Always wear a seatbelt.

WARNING! Use only Volvo genuine car seat covers, or seat covers approved by Volvo. Other seat covers may impede the operation of the side air bags.

WARNING! Side airbags are a supplement to the SIPS system. Always wear a seatbelt.

WARNING! Work on the SIPS bag system can cause malfunction and result in serious personal injury. Always contact an authorised Volvo workshop. Do not put objects in the area between the outside of the seat and the door panel, since this area is required by the side airbag.

1. For information on activated/deacti- vated airbag (SRS), see page 20.

V50 book w446.book Page 22 Thursday, September 9, 2004 10:27 AM

23

Safety

Left-hand drive

SIPS bag system The SIPS bag system consists of a gas generator, side airbag and sensors. A suffi- ciently violent collision trips the sensors and ignites the gas generator, inflating the side airbag. The airbag inflates between the occupant and the door panel and thereby cushions the initial impact while deflating. The side airbag is only normally deployed on the side of the collision.

Right-hand drive

V50 book w446.book Page 23 Thursday, September 9, 2004 10:27 AM

24

Safety

Inflatable Curtain (IC)

Properties The inflatable curtain is a supplement to the SIPS system. It is concealed in the headlining along both sides of the roof and protects both front and rear seat passengers. The inflatable curtain is activated by the SIPS collision sensors if the car is hit from the side. When deployed, the inflatable curtain inflates. The inflatable curtain helps to prevent the driver and passengers from striking their heads on the inside of the car during a collision.

WARNING! The inflatable curtain is a supplement to the seatbelts. Always use a seatbelt.

WARNING! Never hang or fasten anything on the roof handles. The hook is only intended for light outer garments (not for hard objects such as umbrellas). Do not screw or fit anything to the headlining, door pillars or side panels. This could compromise the intended protection. Only use Volvo genuine parts that are approved for placement in these areas.

V50 book w446.book Page 24 Thursday, September 9, 2004 10:27 AM

25

Safety

WHIPS

Protection against whiplash injury WHIPS The whiplash protection system (WHIPS) consists of energy absorbing backrests and specially designed head restraints for the front seats. The system is actuated by a rear- end collision, where the angle and speed of the collision, and the nature of the colliding vehicle all have an influence.

Properties of the seat When the WHIPS system is deployed, the front seat backrests fall backward to alter the position of the driver and front seat passenger. This diminishes the risk of whiplash injury.

WHIPS system and child seats/ booster cushions The WHIPS system does not diminish the protection provided by the car to children seated in a child seat or on a booster cushion.

Correct seating position For the best possible protection, the driver and front seat passenger should sit in the

WARNING! The WHIPS system is a supplement to the seatbelts. Always wear your seatbelt.

WARNING! Never modify or repair the seat or WHIPS system yourself. Contact an authorised Volvo workshop.

V50 book w446.book Page 25 Thursday, September 9, 2004 10:27 AM

26

Safety

WHIPS

centre of the seat with as little space as possible between the head and the head restraint.

You may place:

a child seat or booster cushion on the front passenger seat, provided the

passenger airbag is not activated1. a rear-facing child seat in the rear seat

that uses the back of the front seat as support.

Do not obstruct the WHIPS system

1. For information on activated/deacti- vated airbag (SRS), see page 20.

WARNING! If a seat has been subjected to extreme forces, such as due to a rear collision, the WHIPS system must be checked by an authorised Volvo workshop. Part of the WHIPS systems protective capacity may have been lost even if the seats appear to be undamaged. Contact an authorised Volvo workshop to have the system checked even after a minor rear-end collision.

WARNING! Do not squeeze rigid objects between the rear seat cushion and the front seat backrest. Make sure you do not to obstruct the function of the WHIPS system.

WARNING! If a rear seat backrest is folded down, the corresponding front seat must be moved forward so that it does not touch the folded backrest.

V50 book w446.book Page 26 Thursday, September 9, 2004 10:27 AM

27

Safety

When are the safety systems activated?

If the airbags have been deployed, the following is recommended:

Have the car transported to an authorised Volvo workshop. Do not drive with deployed airbags.

Let an authorised Volvo workshop replace components in the cars safety system.

Always contact a doctor.

NOTE! The SRS, SIPS, IC and belt tensioner systems are deployed only once during a collision.

System Triggered

Seatbelt tensioner In a frontal collision and/or side-impact accident. Airbags (SRS) In a frontal collision.1

Side airbags (SIPS) In a side-impact accident.1

Inflatable curtains In a side-impact accident.1

Whiplash protection WHIPS In a rear-end collision.

1. Airbags do not always deploy during a collision. The particular impact may not require the function, with the cars other safety systems providing occupants adequate protection.

WARNING! The AIRBAG control unit is located in the centre console. If the centre console is drenched with water or other liquid, disconnect the battery cables. Do not attempt to start the car since the airbags may deploy. Have the car transported to an authorised Volvo workshop.

WARNING! Never drive with deployed airbags. They can make steering difficult. Other safety systems may also be damaged. The smoke and dust created when the airbags are deployed can cause skin and eye irritation after intensive exposure. In case of irritation, wash with cold water. The rapid deployment sequence and airbag fabric may cause friction and skin burns.

V50 book w446.book Page 27 Thursday, September 9, 2004 10:27 AM

28

Safety

Crash mode

Driving after a collision If the car is involved in a collision, the text CRASH MODE SEE MANUAL may appear on the information display. This means that the car has reduced functionality. CRASH MODE is a protective state that is enforced when the collision may have damaged the cars vital functions, such as the fuel lines, sensors for one of the safety systems, or the brake system.

Attempting to start the car First, check that no fuel is leaking from the car. There should be no smell of fuel.

If everything seems normal and you have checked for indications of fuel leakage, you may attempt to start the car.

Firstly, remove the ignition key and then reinsert it. The cars electronics will now try to reset themselves to normal mode. Then try to start the car. If CRASH MODE

is still shown in the display then the car must not be driven or towed. Even if the car appears to be driveable, hidden damage may make the car impossible to control once moving.

Moving the car If NORMAL MODE is shown after CRASH MODE has been reset, the car can be moved carefully out of a dangerous position. Do not move the car further than necessary.

WARNING! Never attempt to repair your car or reset the electronics yourself if the car has been in CRASH MODE . This could result in personal injury or the car not functioning as normal. Always allow an authorised Volvo workshop to check and restore the car to normal status after CRASH MODE has been displayed.

WARNING! Never, under any circumstances, attempt to restart the car if it smells of fuel when the CRASH MODE message is indicated. Leave the car at once.

WARNING! If the car is in CRASH MODE it must not be towed. It must be transported to an authorised Volvo workshop.

V50 book w446.book Page 28 Thursday, September 9, 2004 10:27 AM

29

Safety

Inspecting the airbags and inflatable curtains

Inspection intervals The decal on the door pillar(s) shows the dates (year, month) when you should contact an authorised Volvo workshop to inspect and, if necessary, replace the airbags, belt tensioners and inflatable curtains. If you have questions concerning the systems, contact an authorised Volvo workshop.

This decal is located in the rear left door opening.

1. Driver airbag 2. Front passenger airbag 3. Side airbag on the drivers side 4. Side airbag on the passenger side 5. Inflatable curtain on the drivers side 6. Inflatable curtain on the passenger side

V50 book w446.book Page 29 Thursday, September 9, 2004 10:27 AM

30

Safety

Child safety

Children should sit comfortably and safely The position of a child in the car and the choice of equipment is dictated by the childs height and weight, for more information, see page 32.

Children of all ages and sizes must always sit correctly secured in the car. Never allow a child to sit on the knee of a passenger.

Volvos own child safety equipment is designed for your car. Use Volvo genuine equipment to best ensure that the mounting points and attachments are correctly positioned and are sufficiently strong.

NOTE! Regulations regarding the placement of children in cars vary from country to country. Check what laws apply.

You may place:

a child seat or booster cushion on the front passenger seat, provided the passenger airbag is not activated1.

a rear-facing child seat in the rear seat that uses the back of the front seat as support.

Child seats and airbags are not compatible

Child seats and airbags Always place a child in the rear seat if the passenger airbag is activated2. A child in a child seat on the front passenger seat may suffer serious injury if the airbag deploys.

1. For information on activated/deacti- vated airbag (SRS), see page 20.

2. For information on activated/deacti- vated airbag (SRS), see page 20.

WARNING! Persons shorter than 140 cm (4 ft 7) may only sit in the front passenger seat if the passenger airbag is deactivated.

V50 book w446.book Page 30 Thursday, September 9, 2004 10:27 AM

31

Safety

Decals on the end of the dashboard Decal located on the cars sun visor

WARNING! Never place a child in a child seat or on a booster cushion in the front seat if the airbag (SRS) is activated1. Failure to follow this advice can endanger the life of the child.

1. For information on activated/deacti- vated airbag (SRS), see page 20.

V50 book w446.book Page 31 Thursday, September 9, 2004 10:27 AM

32

Safety

Child safety

Placement of children in the car

Weight/age Front seat1 Outer rear seat Centre rear seat

<10 kg (09 months)

Rear-facing child seat, secured with seatbelt and straps. Use a protective cushion between the child seat and the dashboard.

L2: Type approval no. E5 03135

Rear-facing child seat, secured with seatbelt, support legs and straps.

L2: Type approval no. E5 03135

Rear-facing child seat, secured with seatbelt, support legs and straps.

L2: Type approval no. E5 03135

918 kg (936 months)

Rear-facing child seat, secured with seatbelt and straps. Use a protective cushion between the child seat and the dashboard.

L2: Type approval no. E5 03135

Rear-facing child seat, secured with seatbelt, support legs and straps.

L2: Type approval no. E5 03135

Rear-facing child seat, secured with seatbelt, support legs and straps.

L2: Type approval no. E5 03135

1536 kg (312 years)

Booster cushion with or without backrest.

L2: Type approval no. E5 03139

Alternatives: Booster cushion with or without backrest.

L2: Type approval no. E5 03139 Integrated booster cushion.

L2: Type approval no. E5 03168

Booster cushion with or without backrest.

L2: Type approval no. E5 03139

1. For information on activating/deactivating the airbag (SRS), see page 20. 2. L: Suitable for certain child seats as listed in the specified type approval. Child seats can be vehicle-specific, limited, semi-universal or universal.

V50 book w446.book Page 32 Thursday, September 9, 2004 10:27 AM

33

Safety

ISOFIX fixture system for child seats (option) The outer rear seats have ISOFIX attachment points. Contact a Volvo dealer for further information on child safety equipment.

Integrated booster cushion (option) Volvos integrated booster cushion for the outer rear seats is specially designed to provide optimum safety for children. Combined with the regular seatbelts, the booster cushion is approved for children weighing between 15 and 36 kg.

WARNING! Never place a child in a child seat or on a booster cushion in the front seat if the airbag (SRS) is activated. No one shorter than 140 cm (4 ft 7) should sit in the front passenger seat if the airbag (SRS) is activated.1

Failure to follow the advice given above can endanger the life of the child.

1. For information on activating/deactivating the airbag (SRS), see page 20.

V50 book w446.book Page 33 Thursday, September 9, 2004 10:27 AM

34

Safety

Child safety

Raising the booster cushion Pull that handle to raise the booster

cushion (1). Grasp the cushion with both hands and

push it backwards (2). Push until it locks in place (3).

Check that:

the seatbelt is in contact with the childs body and is not slack or twisted, and that the belt is positioned correctly across the shoulder.

the hip strap is low across the hips for optimum protection.

the belt does not touch the childs throat or lie below the shoulder.

Carefully adjust the position of the head restraint to suit the child.

Lowering Pull the handle (1). Lower the seat and press until it locks (2). NOTE! Remember to stow away the booster cushion before lowering the rear seat backrest.

WARNING! The booster cushion must be in the locked position before the child is placed there.

WARNING! If an integrated booster cushion has been subjected to a major load, such as in conjunction with a collision, the entire booster cushion must be replaced. This includes the seatbelt, complete with bolts. Even if the booster cushion appears to be undamaged, it may not afford the same level of protection. The booster cushion must also be replaced if it is heavily worn.

V50 book w446.book Page 34 Thursday, September 9, 2004 10:27 AM

35

Safety

Replacing the booster cushion It is important that the integrated booster cushion is properly secured. Therefore, leave replacement and any repair of the cushion to an authorised Volvo workshop. Do not modify or adapt the booster cushion in any way.

Fitting a child seat Volvo has child safety products that are designed for and tested by Volvo.

When using other products that are available on the market, it is important to read the fitting instructions included with the product.

Do not attach the straps for the child seat to the horizontal adjustment bar, springs, rails or beams under the seat. Sharp edges can damage the straps.

Allow the back of the child seat to rest against the dashboard. This applies to cars without a passenger airbag, or where the airbag is deactivated.

Never place the child seat in the front seat if the car is equipped with an activated1 front passenger airbag. If problems arise when fitting child safety products, contact the manufacturer for clearer instructions.

1. For information on activated/deacti- vated airbag (SRS), see page 20.

V50 book w446.book Page 35 Thursday, September 9, 2004 10:27 AM

36

Safety

V50 book w446.book Page 36 Thursday, September 9, 2004 10:27 AM

37

Instruments and controls Combined instrument panel 38 Indicator and warning symbols 39 Information display 43 Electrical socket and switches on centre console 44 Lighting panel 45 Left-hand stalk switch 47 Right-hand stalk switch 49 Cruise control (option) 51 Steering wheel keypad (option) 52 Steering wheel adjustment, hazard warning flashers 53 Parking brake, electrical socket 54 Power windows 55 Rearview and door mirrors 58 Power sunroof (option) 61 Personal preferences 63

V50 book w446.book Page 37 Thursday, September 9, 2004 10:27 AM

38

Instruments and controls

Combined instrument panel

1. Speedometer 2. Direction indicators, left 3. Warning symbol 4. Information display The display

presents information and warning messages, outside temperature and the time. When the ambient temperature is between +2 C and 5 C, a snowflake symbol appears on the display. This warns of icy roads. The outside temper- ature gauge may show a slightly high reading after the car has been stationary.

5. Information symbol

6. Direction indicator, right 7. Tachometer Indicates engine speed in

thousands of revolutions per minute (rpm).

8. Indicator and warning symbols 9. Fuel gauge 10. Button for trip meter Used to measure

short distances. Press the button to switch between trip meters T1 and T2. Press and hold (more than 2 seconds) to zero the active trip meter.

11. Display Display for automatic gear position, rain sensor, odometer, trip meter and cruise control.

12. Main beam indicator 13. Knob for clock Turn the knob to adjust

the time. 14. Temperature gauge Displays the

temperature of the engine cooling system. A message will appear on the display if the temperature becomes too high and the gauge goes into the red zone. Bear in mind that extra lights placed in front of the air intake, for example, reduce the cooling capacity at high outside temperatures and high engine loads.

15. Indicator and warning symbols

V50 book w446.book Page 38 Thursday, September 9, 2004 10:27 AM

39

Instruments and controls

Indicator and warning symbols

Indicator and warning symbols All indicator and warning symbols light up when the ignition key is turned to position II before starting. This is to check that the symbols/lights are working. When the engine starts, all the symbols should go out except the handbrake symbol, which extinguishes when the handbrake is released.

If the engine does not start within five seconds, all symbols extinguish except the symbols for a fault in the cars emissions system and for low oil pressure. Certain symbols

may have no function, depending on the cars specifications.

Symbols in the centre of the instrument panel

The red warning symbol lights up when a fault has been indicated which could affect the safety and/or driveability of the

car. At the same time an explanatory text is shown in the information display. Symbol and message text are visible until the fault has been rectified.

The warning symbol can also light up in conjunction with other symbols.

Stop in a safe place. Do not drive the car further.

Read the information on the information display.

Rectify the fault as instructed or contact an authorised Volvo workshop.

When one of the cars systems does not behave as intended, the yellow information symbol lights up and a text appears on the display. The message text is

cleared using the READ button, see page 43, or disappears automatically after 2 minutes.

The yellow information symbol can also come on in conjunction with other symbols.

NOTE! When the message text "TIME FOR REGULAR SERVICE" is shown, the symbol lamp and message text are cleared using the READ button, or disappear automatically after 2 minutes.

V50 book w446.book Page 39 Thursday, September 9, 2004 10:27 AM

40

Instruments and controls

Indicator and warning symbols

Indicator symbols left-hand side 1. Fault in cars emissions system

Drive to an authorised Volvo workshop to have the system checked.

2. ABS fault If this symbol lights, the system is not working. The cars regular brake system continues to work, but without the ABS function.

Stop the car in a safe place and turn off the engine.

Restart the engine.

Drive to an authorised Volvo workshop to have the ABS checked if the symbol remains lit.

3. Rear fog lamp This symbol is lit when the rear fog lamp is on.

4. STC or DSTC stability system A flashing symbol indicates that the stability system is operating.

5. No function 6. Engine preheater (diesel)

This symbol is lit during engine preheating. Preheating occurs when the temperature is below -2 C. The car can be started

once the symbol extinguishes.

7. Low level in fuel tank This symbol lights when there are approximately 8 litres of usable fuel left in a petrol-engined car, or 7 litres in a diesel-engined car.

Indicator symbols right-hand side 1. Indicator symbol for trailer

This symbol flashes when the direction indicators are used and a trailer is coupled. If the symbol does not flash, one of the lamps

on the trailer or the car is defective.

2. Parking brake applied This symbol is lit even if the parking brake is only applied one notch. Check that the lever is properly applied.

V50 book w446.book Page 40 Thursday, September 9, 2004 10:27 AM

41

Instruments and controls

3. Airbags SRS If this symbol remains on or comes on while driving, it means a fault has been detected in the seatbelt buckle, SRS, SIPS, or IC

system. Drive directly to an authorised Volvo workshop to have the system checked.

4. Low oil pressure If this symbol lights up while driving, the engine oil pressure is too low. Stop the engine immedi- ately and check the engine oil

level, top up if necessary. If the symbol lights up and the oil level is normal, contact an authorised Volvo workshop.

5. Seatbelt reminder This symbol lights if someone in a front seat has not put on their seatbelt or if someone in a rear seat has taken off their seatbelt.

6. Alternator not charging If this symbol lights while driving, a fault has occurred in the electrical system. Contact an authorised Volvo workshop.

7. Fault in brake system If this symbol lights, the brake fluid level may be too low.

Stop the car in a safe place and check the level in the brake fluid reservoir, see page 164. If the level in the reservoir is below MIN, the car should not be driven any further. Transport the car to an authorised Volvo workshop to have the brake system checked.

If the BRAKE and ABS symbols come on at the same time, there may be a fault in the brake force distribution system.

Stop the car in a safe place and turn off the engine.

Restart the engine. If both symbols extinguish, continue

driving. If the symbols remain on, check the level

in the brake fluid reservoir. See page 164. If the brake fluid level is normal but the

symbols are still lit, the car can be driven, with great care, to an authorised Volvo workshop to have the brake system checked.

If the level in the reservoir is below MIN, the car should not be driven any further. Have the car transported to an authorised Volvo workshop to have the brake system checked.

WARNING! If the BRAKE and ABS symbols are lit at the same time, there is a risk that the rear end will skid during heavy braking.

V50 book w446.book Page 41 Thursday, September 9, 2004 10:27 AM

42

Instruments and controls

Indicator and warning symbols

Reminder doors not closed If one of the doors, the bonnet1 or the tailgate is not properly closed, the driver will be reminded of this.

Low speed If the car is travelling at more than 7 km/h, the information symbol will light and one of the following texts will be shown on the display: DRIVER DOOR

OPEN, PASSENGER DOOR OPEN, LEFT REAR DOOR OPEN, BONNET OPEN, or RIGHT REAR DOOR OPEN. Stop the car as soon as it is safe to do so and close the door that is open.

High speed If the car is travelling at more than 7 km/h, the warning symbol will light and one of the texts from the previous paragraph will appear on the display.

Tailgate reminder If the tailgate is open, this infor- mation symbol will come on and TAILGATE OPEN will appear on the display.

1. Only cars with alarms.

V50 book w446.book Page 42 Thursday, September 9, 2004 10:27 AM

43

Instruments and controls

Information display

Messages When a warning or indicator symbol come, a message appears on the information display.

Press the READ button (A). Switch between messages with the READ button. Fault messages are stored in the memory until the fault is rectified.

NOTE! If a warning message appears while you are using the trip computer, the message must be read (press READ) before the previous activity can be resumed.

Message Specification

STOP SAFELY Stop and switch off the engine. Serious risk of damage. STOP ENGINE Stop and switch off the engine. Serious risk of damage. SERVICE URGENT Leave the car for servicing immediately. SEE MANUAL Read the owners manual. SERVICE REQUIRED Have your car serviced as soon as possible. TIME FOR REGULAR SERVICE Time for service. The interval depends on distance, number of months since last service and

engine running time.

V50 book w446.book Page 43 Thursday, September 9, 2004 10:27 AM

44

Instruments and controls

Electrical socket and switches on centre console

Electrical socket, DSTC system, extra equipment

12 V electrical socket The electrical socket can be used for 12 V accessories, such as mobile phone chargers and coolers. The maximum current is 10 A. For the socket to supply current, the ignition key must be in at least position I.

Cigarette lighter (option) Activate the lighter by pushing in the button. The button pops out when the lighter is hot.

Pull out the lighter and light a cigarette on the heated coils.

Stability system, STC or DSTC1

The stability control system comes on automatically when the car is started.

To suppress the stability control system:

Press and hold the button for at least half a second.

For further information, see page 117.

Extra equipment Space for an extra switch for retrofitted equipment.

WARNING! Always leave the plug in the socket when the socket is not in use.

1. Option on certain markets

WARNING! Suppressing the stability control system alters the driving characteristics of the car.

V50 book w446.book Page 44 Thursday, September 9, 2004 10:27 AM

45

Instruments and controls

Lighting panel

1. Headlamp levelling This control adjusts the height of the headlamp beam. This is used when the car is so heavily laden that it affects the height of the beams. Normal bean height - move the control

upward (0). Lowered beam height - move the control

downward. Cars with Bi-Xenon headlamps (option) have automatic headlamp levelling.

2. Headlamps and position/ parking lamps

All lighting off.

Cars with daytime running lights (certain countries) Dipped beam comes on automatically when the ignition key is switched to the driving position (II) and cannot be switched off. Before trips to countries where automatic dip beam is unsuitable, the daytime running lights can be deactivated. Contact an authorised Volvo workshop. Front and rear position/ parking lamps, number plate lighting and instrument lighting are lit at the same time as dipped beam.

Position/parking lamps Front and rear position/parking lamps, number plate lighting and instrument lighting. See also page 47.

Main and dipped beam Ignition key in position II:

Headlamps (plus front and rear position/parking lamps, number plate lighting and instrument lighting) are lit.

NOTE! The light switch must be turned to this position to switch on the main beam. However, it is possible to flash the main beam in all positions, even when the ignition key is removed. See also page 47.

3. Instrument lighting Manual adjustment: Brighter illumination - move the control

upwards. Dimmer illumination - move the control

downwards. Automatic control: To improve readability and save electricity, a twilight sensor automatically adjusts the brightness of the instrument lighting.

To improve the clarity of the centre console display, the background colour switches between dark and light to suit lighting conditions.

4. Front fog lamps (option) Ignition key in position II: Press the button. The front fog lamps light along with the position/parking lamps and main/dipped beam. The LED in the button is lit while the front fog lamps are on.

NOTE! In some countries, it is prohibited to use dipped beam or main beam at the same time as front fog lamps.

5. Fuel filler flap Press the button to open the fuel filler flap.

V50 book w446.book Page 45 Thursday, September 9, 2004 10:27 AM

46

Instruments and controls

Lighting panel

6. Rear fog lamp Ignition key in position II: Press the button to switch on the rear fog lamp. The rear fog lamp lights along with the front fog lamps or main/dipped beam. The LED in the button and the symbol in the combined instrument panel light. If the front fog lamps and the main or dipped beam are switched off and on again, the rear fog lamp goes out. Press the button to switch it on again.

Dazzling Remember to switch off the rear fog lamp when you see a car in the rearview mirror. Only the last car in a queue should have the rear fog lamp switched on.

NOTE! Regulations for the use of front and rear fog lamps vary from country to country.

V50 book w446.book Page 46 Thursday, September 9, 2004 10:27 AM

47

Instruments and controls

Left-hand stalk switch

Direction indicators, light switch and main beam flash Resistance point position (1) When changing lanes or overtaking, move the lever until you feel a distinct resistance. The lever returns when released. This action results in three flashes.

Normal turns (2) The direction indicators light when you move the lever in the direction the steering wheel moves during a turn. When the steering wheel returns to centre after a turn, the direction indicators switch off automatically.

Main beam flash (3) Pull the lever towards you (until you feel a slight resistance). The main beam remains lit until you release the lever.

Switching between main and dipped beam (3) Pull the lever towards you past the "flash position" and release it to change between main and dipped beam.

Home safe lighting (3) When leaving the car in the dark or in a dimly lit area:

Remove the key from the ignition switch. Pull the stalk switch towards you. Exit the car. Lock the doors. The dipped-beam lighting, position/parking lights, number plate lighting and door mirror lamps (option) will come on. These lamps will remain lit for 30, 60 or 90 seconds. You can adjust the delay from the car settings menu on the centre console display. See page 64.

Trip computer Controls To scroll through trip computer information, turn the thumbwheel (B) in steps, either upward or downward. Continue turning to return to the starting point.

NOTE! If a warning message interrupts while you are using the trip computer, this message must be acknowledged. Acknowledge by pressing the READ button (A) and revert to the trip computer function.

Functions The trip computer displays the following information:

AVERAGE SPEED

V50 book w446.book Page 47 Thursday, September 9, 2004 10:27 AM

48

Instruments and controls

Left-hand stalk switch

SPEED IN MILES PER HOUR1

CURRENT FUEL CONSUMPTION AVERAGE FUEL CONSUMPTION RANGE TO EMPTY FUEL TANK Average speed When the ignition is switched off, the average speed is stored and used as the basis of the new value when you continue driving. Reset using the RESET button (C).

Speed in miles per hour1

Current speed is displayed in mph.

Current fuel consumption Present fuel consumption is calculated every second. The information on the display is updated every couple of seconds. When the car is stationary, " ---- " appears on the display.

Average fuel consumption The average fuel consumption since the last reset (RESET). The average fuel consumption is stored when the ignition is switched off and remains until the function is reset. Reset using the RESET button (C).

NOTE! There may be a slight error in the reading if a fuel-driven heater is used.

Range to empty fuel tank This calculation is based on the average fuel consumption over the last 30 km (19 miles) and the remaining fuel volume. It displays the approximate distance that can be driven with the fuel remaining in the tank. When the range to empty is less than 20 km (12 miles) "----" appears on the display.

NOTE! There may be a slight error in the reading if a fuel-driven heater is used.

Resetting Select average speed or average fuel

consumption. Press and hold the RESET button (C) for

at least five seconds to reset the average speed and average fuel consumption at the same time.

1. Certain countries

V50 book w446.book Page 48 Thursday, September 9, 2004 10:27 AM

49

Instruments and controls

Right-hand stalk switch

Windscreen wipers A. Windscreen and headlamp washers B. Rain sensor - On/Off C. Thumbwheel D. Rear window wiper and washer Windscreen wipers off

The windscreen wipers are off when the stalk switch is in position 0.

Single sweep Raise the stalk switch to make a single sweep.

Intermittent wiping The delay between sweeps can be adjusted. Turn the thumbwheel (C) upward for a

shorter interval between sweeps. Turn it downward to increase the delay.

Continuous wiping The wipers sweep at normal speed.

The wipers sweep at high speed.

Windscreen/headlamp washer Pull the stalk switch towards the steering wheel to start the windscreen and headlamp washers. The wipers will make three more sweeps once the stalk is released.

High-pressure headlamp washing (option on certain markets)

High-pressure headlamp washing consumes a large quantity of washer fluid. To save fluid, the headlamps are washed as follows.

Dipped beam selected with the switch on lighting panel:

The headlamps are washed the first time the windscreen is washed. Within the next ten minutes, they are washed every fifth wash of the windscreen. If more than ten minutes passes between washes, the headlamps are washed every time.

Parking/position lamps selected with the switch on the lighting panel:

Bi-Xenon headlamps are only washed every fifth wash cycle irrespective of the time that elapses.

Halogen headlamps are not washed. The switch on the lighting panel is in position 0:

Bi-Xenon headlamps are only washed every fifth wash cycle irrespective of the time that elapses.

Halogen headlamps are not washed.

V50 book w446.book Page 49 Thursday, September 9, 2004 10:27 AM

50

Instruments and controls

Right-hand stalk switch

Rain sensor (option) The rain sensor detects the amount of water on the windscreen so that the windscreen wipers automatically increase or decrease speed. The sensitivity of the rain sensor is adjusted with the thumbwheel (C).

Turn the thumbwheel upward for higher sensitivity and downward for lower sensitivity. (An extra sweep is made when the thumbwheel is turned upward.)

On/Off When activating the rain sensor, the ignition key must be in at least position I and the windscreen wiper stalk must be in position 0.

To activate the rain sensor:

press button (B). The rain sensor symbol is shown on the lower display.

To turn the rain sensor off, either:

press button (B). press the stalk switch downward to

another wiper program. If the stalk switch is raised, the rain sensor will remain active; the wipers make an extra sweep and then return to rain sensor mode when the stalk is released to position 0.

The rain sensor is automatically deactivated when the key is removed from the ignition switch or five minutes after the ignition is switched off.

Thumbwheel Use the thumbwheel to adjust the frequency of sweeps when intermittent wiping is selected, or the sensitivity to rain when the rain sensor is selected.

Rear window wiper and washer Press the stalk switch forward to initiate rear window washing and wiping. The wiper blade makes several sweeps once washing has finished. The switch at the end of the stalk has three positions:

Intermittent wiping:

Depress the top of the switch. Normal speed:

Depress the bottom of the switch. Neutral:

Function deactivated. Wiper reversing Engaging reverse gear while the windscreen wipers are on initiates intermittent rear window wiping. If the rear window wiper is already on at normal speed, no change is made.

The function for intermittent wiping for reverse can be deactivated. Contact an authorised Volvo workshop.

V50 book w446.book Page 50 Thursday, September 9, 2004 10:27 AM

51

Instruments and controls

Cruise control (option)

Activating The controls for cruise control are to the left of the steering wheel.

Setting the desired speed:

Press the CRUISE button. CRUISE is shown on the combined instrument panel.

Touch + or to lock the vehicle speed. CRUISE ON appears on the combined instrument panel.

Cruise control cannot be engaged at speeds below 30 km/h (20 mph) or above 200 km/h (125 mph).

Increasing or decreasing speed Increase or decrease the speed by

pressing and holding + or . The speed of the car when the button is released is set as the new speed.

Pressing (less than half a second) + or changes the speed 1 km/h (0.6 mph) or 1.6 km/h (1 mph)1.

NOTE! A temporary increase in speed (less than one minute) using the accelerator, such as while overtaking, does not affect the cruise control setting. When you release the accel- erator, the car will return to the programmed speed.

Temporary disengagement Press 0 to disengage the cruise control

temporarily. CRUISE will be shown on the combined instrument panel. The speed set earlier is stored in the memory.

The cruise control is also temporarily disen- gaged when:

the brake pedal or clutch pedal is depressed

speed falls below 25-30 km/h when travelling uphill1

the gear selector is moved to position N wheel spin or wheel lock-up occurs. a temporary increase in speed lasts

longer than one minute.

Return to the set speed Press this button to resume the previously set speed. CRUISE ON appears on the combined instrument panel.

Disengaging Press CRUISE to disengage the cruise control. CRUISE ON goes out on the combined instrument panel.

1. Depending on engine type

V50 book w446.book Page 51 Thursday, September 9, 2004 10:27 AM

52

Instruments and controls

Steering wheel keypad (option)

The four buttons at the bottom of the steering wheel keypad control the radio and the telephone. The function of a button depends on which system is active. The steering wheel keypad can be used to scroll between preset stations, change CD/MD tracks and adjust the volume.

Press and hold one of the arrow keys to fast forward/reverse or search for the next station.

The telephone must be in standby mode to adjust audio system settings.

The telephone must be activated to control the telephone functions using the arrow keys.

V50 book w446.book Page 52 Thursday, September 9, 2004 10:27 AM

53

Instruments and controls

Steering wheel adjustment, hazard warning flashers

Steering wheel adjustment The steering wheel can be adjusted for both height and reach. Pull the lever towards you to release the

steering wheel. Adjust the steering wheel to the position

that suits you best. Push back the lever to fix the steering

wheel in place. If the lever is stiff, press the steering wheel lightly at the same time as you push the lever back.

Hazard warning flashers Use the hazard warning flashers (all direction indicators flash) when the car is stopped where it could be a traffic hazard or obstruction. Press the button to activate the function.

NOTE! Regulations regarding the use of hazard warning flashers vary from country to country.

WARNING! Adjust the steering wheel before driving off, never while driving. Before driving, check that the steering wheel is fixed in position.

V50 book w446.book Page 53 Thursday, September 9, 2004 10:27 AM

54

Instruments and controls

Parking brake, electrical socket

Parking brake (handbrake) The lever is located between the front seats. The parking brake acts on the rear wheels. A warning symbol on the combined instrument panel lights when the brake is applied.

The warning symbol lights even if the parking brake is only applied one notch. Check that the lever is properly applied.

To release the parking brake:

Pull the lever up slightly and press in the button. Lower the lever and release the button.

Electrical socket in the rear seat The electrical socket can be used for 12 V accessories, such as mobile phone chargers

and coolers. The maximum current is 10 A. For the socket to supply current, the ignition key must be in at least position I.

Cigarette lighter (option) Activate the lighter by pushing in the button. The button pops out when the lighter is hot. Pull out the lighter and light a cigarette on the heated coils.

WARNING! Always leave the plug in the socket when the socket is not in use.

V50 book w446.book Page 54 Thursday, September 9, 2004 10:27 AM

55

Instruments and controls

Power windows

Operation The power windows are operated using the controls in the door armrests. The ignition key must be in position I or II for the power windows to operate. The windows continue to work when the car is stopped and ignition key removed, provided neither of the front doors is opened.

To open a window:

Depress the front of the control. To close a window:

Raise the front of the control. Remote control and central locking buttons All side windows can be opened/closed automatically with the remote control or the central locking buttons:

Press and hold the lock button for two seconds - the windows will open or close.

To interrupt opening/closing:

Press the lock button again.

A. Front door window B. Rear door window

Drivers door The driver can operate all of the power windows from the drivers seat.

The windows in the front doors can be opened and closed in two ways:

Manual operation Depress one of the controls (A) or (B)

gently or raise it gently. The power window opens or closes as long as the switch is actuated.

Automatic operation Fully depress one of the controls (A) or

(B) or raise it fully, then release. The side window will then open or close automati- cally. If the window is obstructed by an object, the movement will stop.

WARNING! Make sure that childrens or other passengers hands are clear when closing the windows by remote control.

WARNING! If there are children in the car: Remember to switch off the supply to the power windows by removing the ignition key if the driver leaves the car. Make sure that childrens and other passengers hands are clear when closing the windows.

WARNING! If the rear door windows are operated from the drivers door: Check that none of the rear seat passengers are in danger of getting their hands caught when closing the windows.

V50 book w446.book Page 55 Thursday, September 9, 2004 10:27 AM

56

Instruments and controls

Power windows

Blocking rear power windows and electric child safety locks1

Blocking power windows in the rear doors The switch LED is lit.

The rear door windows can only be operated from the drivers door.

NOTE! If the car has electric child safety locks1 on the rear doors, the LED indicates that these are activated. The doors cannot then be opened from the inside. When the electric child safety locks are activated, a text message is shown on the display.

The switch LED is unlit The rear door windows can be operated both with the control on each rear door and with the controls on the drivers door.

Front passenger seat

Front passenger seat The control in the front passenger door operates that window only.

1. Option

V50 book w446.book Page 56 Thursday, September 9, 2004 10:27 AM

57

Instruments and controls

Rear power windows The rear door windows can be operated with the control on each door or with the switch on the drivers door. If the LED in the switch for blocking the rear power windows (located in the control panel in the drivers door) is lit, the rear door windows can only be operated from the drivers door. The windows in the rear doors are operated in the same way as the windows in the front doors.

V50 book w446.book Page 57 Thursday, September 9, 2004 10:27 AM

58

Instruments and controls

Rearview and door mirrors

Interior rearview mirror Dipping 1. Dip the mirror with the lever 2. Normal position 3. Dipped position. Use this to reduce

annoying dazzle from the headlights of following vehicles.

Autodimming (option) A sensor (4) on the bottom edge of the mirror detects light coming from behind and dims the mirror if the light is strong. An authorised Volvo workshop can adjust the sensitivity.

NOTE! The illustration is a montage. The mirror has either manual dipping or automatic dimming, never both at the same time.

Rearview mirror with compass (option on certain markets) The upper right-hand corner of the rearview mirror has an integrated display that shows the compass direction in which the front of the car is pointing. Eight different directions are shown with English abbreviations: N (north), NE (north east), E (east), SE (south east), S (south), SW (south west), W (west) and NW (north west).

Calibrating the compass The compass may need calibrating in special cases (setting points of the compass). The letter C is shown in the mirrors display if the compass needs calibrating.

Stop the car in a large open area. Start the car. Press and hold button (1) (use the point

of a pen or similar) for at least six seconds. The character C will reappear.

Drive slowly in a circle at a speed of no more than 10 km/h until a compass direction appears on the display.

Calibration is complete.

V50 book w446.book Page 58 Thursday, September 9, 2004 10:27 AM

59

Instruments and controls

Magnetic zones Adjusting the zone The earth is divided into 15 magnetic zones. The compass is set for the geographical area to which the car was delivered.

Select a different compass area as follows:

Turn on the ignition. Press and hold button (1) for at least

three seconds (use the point of a pen or similar). The number for the current area is displayed.

Press the button repeatedly until the number for the required geographic area (1-15) is shown.

The display will revert to showing the compass direction a few seconds after you stop scrolling.

Door mirrors The controls for adjusting the two door mirrors are at the front of the drivers door armrest.

Press the L button for the left-hand door mirror or R for the right-hand door mirror. The LED in the button lights.

Adjust the position with the joystick in the centre.

Press the L or R button again. The LED should no longer be lit.

Retractable power door mirrors (option) The mirrors can be retracted for parking and driving in narrow spaces.

V50 book w446.book Page 59 Thursday, September 9, 2004 10:27 AM

60

Instruments and controls

Rearview and door mirrors

Press the L and R button at the same time.

Release them after approximately one second. The mirrors automatically stop in the fully retracted position.

Folding out the mirrors Press the L and R button at the same

time. The mirrors automatically stop in the fully extended position.

Resetting to neutral Mirrors that have been moved out of position by an external force must be reset to the neutral position for electric retracting and extending to work.

Proceed as follows:

Press the L and R button to retract the mirrors.

Extend the mirrors again with the L and R button. The mirrors are now reset to the neutral.

Home safe and approach lighting The lamps on the door mirrors light when the home safe lighting or approach lighting is activated.

Important! Do not use a scraper to remove ice from the mirrors as this can scratch the glass. Use the defroster function instead, see page 69.

WARNING! The driver-side door mirror is wide angled to provide optimal vision. Objects may appear further away than they actually are.

V50 book w446.book Page 60 Thursday, September 9, 2004 10:27 AM

61

Instruments and controls

Power sunroof (option)

Open positions The sunroof controls are located in the roof panel. The sunroof can be opened to two positions:

A. Ventilation position, raised at the rear edge

B. Sliding position, backwards/forwards The ignition key must be in position I or II.

1. Opening, automatic 2. Opening, manual 3. Closing, manual 4. Closing, automatic 5. Opening, ventilation position 6. Closing, ventilation position Ventilation position Open:

Press the rear edge of the control (5) upward.

Close:

Pull the rear edge of the control (6) downward.

From ventilation position to fully open sunroof:

Pull the control rearward to the end position (1) and release.

Sliding position Automatic operation Pull the control past the point of resistance (2) to the rear end position (1) or past the point of resistance (3) to the forward end position (4) and release. The sunroof opens/closes completely.

Manual operation Open:

Pull the control rearward to the point of resistance (2). The sunroof moves toward the fully open position as long as the button is held in this position.

Close:

Press the control forward to the point of resistance (3). The sunroof moves toward the closed position as long as the button is held in this position.

WARNING! If there are children in the car: Switch off the supply to the power sunroof by removing the ignition key if the driver leaves the car.

WARNING! The sunroofs pinch-protection function only operates during automatic closing, not manual closing.

V50 book w446.book Page 61 Thursday, September 9, 2004 10:27 AM

62

Instruments and controls

Power sunroof (option)

Closing using the remote control or central locking button Closing using the remote control or central locking button:

Press and hold the lock button for two seconds. The sunroof and windows close and the doors lock.

If you need to interrupt closing:

Press the lock button again.

Sunscreen The sunroof features a manual, sliding interior sunscreen. The sunscreen slides back automatically when the sunroof is opened. Grip the handle and slide the screen forwards to close the screen.

Pinch protection The sunroofs pinch protection function is activated if the hatch is blocked by an object. If blocked, the sunroof will stop and automat- ically open to the previous position.

WARNING! Make sure that the hands of children and passengers are clear when closing the sunroof by remote control.

WARNING! The sunroofs pinch protection function only operates during automatic closing, not during manual closing. Make sure childrens hands are clear when closing the sunroof.

V50 book w446.book Page 62 Thursday, September 9, 2004 10:27 AM

63

Instruments and controls

Personal preferences

Control panel

Possible settings Personal preferences can be set for some of the cars functions: the locks, climate control

and audio functions. For audio functions, see page 185.

Control panel A. Display B. MENU C. EXIT D. ENTER E. Navigation Use The settings are shown on the display (A).

Open the menu to enter settings:

Press MENU (B). Scroll, for example, to " Car Settings "

with the navigation button (E). Press ENTER (D). Select an alternative with the navigation

button (E). Activate your selection with ENTER. Close the menu:

Press EXIT (C) for approximately one second.

Climate control Automatic fan adjustment The fan speed can be set to AUTO mode in cars equipped with ECC:

Select between Low, Normal and High.

Recirculation timer When the timer is active, the air recirculates for 3-12 minutes, depending on the outside air temperature.

Select On/Off depending on whether you wish the recirculation timer to be active.

Reset all Resets the climate function options to the factory settings.

Car settings Unlock feedback light The hazard warning flashers can provide feedback when the car is unlocked with the remote control. This function can be turned On or Off.

Lock feedback light The hazard warning flashers can provide feedback when the car is locked with the remote control. This function can be turned On or Off.

Autolock The doors and tailgate can be locked automatically when the car starts to move. The setting options are On or Off.

Unlock doors There are two alternatives for unlocking:

All doors one press of the remote control unlocks all doors.

V50 book w446.book Page 63 Thursday, September 9, 2004 10:27 AM

64

Instruments and controls

Personal preferences

Drivers door first, then all others one press of the remote control unlocks the drivers door. A second press then unlocks all the other doors.

Keyless door opening All doors - all doors are locked or

unlocked at the same time. Doors on the same side - front and rear

doors on the same side are unlocked together.

Both front doors - both front doors are unlocked together.

One front door - one of the front doors (either) can be unlocked separately.

Approach lighting Select the time the cars lights should remain on when the approach lighting button is pressed. The following alternatives are available: 30/60/90 seconds.

Home safe lighting Select the time the cars lights should remain on when the left-hand stalk switch is pulled back after the ignition key has been removed. The following alternatives are available: 30/ 60/90 seconds.

Information VIN (Vehicle Identification Number). The

cars unique identity number.

Number of keys. The number of keys registered for the car is shown.

V50 book w446.book Page 64 Thursday, September 9, 2004 10:27 AM

65

Climate control General information on climate control 66 Manual climate control, A/C 68 Electronic climate control, ECC (option) 70 Air distribution 73 Fuel-driven parking heater (option) 74

V50 book w446.book Page 65 Thursday, September 9, 2004 10:27 AM

66

Climate control

General information on climate control

Air conditioning The climate control system cools or heats, and dehumidifies the air entering the passenger compartment. The car is equipped with either manual (A/C) or electronic climate control (ECC).

NOTE! The air conditioning can be switched off, but for optimum air quality in the passenger compartment and to prevent the windows from misting up, it should always be on (even at temperatures of 0-15 C).

Misting windows Reduce the problem of windows misting up on the inside by cleaning the windows. Use a regular window cleaner.

Ice and snow Remove ice and snow from the climate control air intake (the grille between the bonnet and the windscreen).

Fault tracing An authorised Volvo workshop has the instru- ments and tools required for any fault tracing or repair of your climate control system. Entrust checks and repairs only to trained personnel.

Refrigerant The air conditioning system contains R134a refrigerant. This refrigerant contains no

chlorine, which means that it is harmless to the ozone layer. The system must only be charged with R134a refrigerant. Have an authorised Volvo workshop carry out this work.

Passenger compartment filter All air which enters the passenger compartment is first cleaned by a filter. This filter must be replaced regularly. Follow the Volvo Service Programme for the recom- mended replacement intervals. If the car is used in a severely contaminated environment, it may be necessary to replace the filter more often.

NOTE! There are several different types of passenger compartment filter. Ensure that the correct filter is installed.

Display There is a display above the climate control panel that displays climate control settings.

Personal preferences You can set preferences for two climate control functions:

Fan speed in AUTO mode (applies only to cars with ECC).

Recirculation timer for passenger compartment air.

For information about these settings, see page 63.

Air vents in the dashboard A. Open B. Closed C. Lateral airflow D. Vertical airflow Aim the outer vents towards the side windows to remove misting.

Cold weather: Close the centre vents for optimum comfort and best demisting.

V50 book w446.book Page 66 Thursday, September 9, 2004 10:27 AM

67

Climate control

ECC (option) Actual temperature The temperature you select corresponds to the physical experience with reference to factors such as air speed, humidity and solar radiation in and around the car.

Sensor location: The sun sensor is on the top side of the

dashboard. The temperature sensor for the

passenger compartment is behind the climate control panel.

NOTE! Do not cover or block the sensors with clothing or other objects.

Side windows and sunroof To ensure that the air conditioning works satisfactorily, close all side windows and the sunroof (if fitted).

Acceleration The air conditioning system switches off temporarily at full throttle. You may feel a temporary rise in temperature.

Condensation In warm weather, condensation from the air conditioning system may drip under the car. This is normal.

V50 book w446.book Page 67 Thursday, September 9, 2004 10:27 AM

68

Climate control

Manual climate control, A/C

Control panel 1. Fan 2. Recirculation 3. Defroster 4. Air distribution 5. AC - ON/OFF 6. Heated front left seat 7. Heated front right seat 8. Rear window and door mirror defrosters 9. Temperature

Functions Fan

Increase or decrease the fan speed by turning the knob.

If the knob is turned anticlockwise and the fan indicator in the display goes out, the fan and the air condi-

tioning are switched off. The display shows the fan symbol and OFF.

Recirculation Recirculation can be used to shut out bad air, exhaust fumes, etc. from the passenger compartment. The air in the passenger compartment is recirculated.

No outside air is taken into the car when this function is activated. Recirculation (together with the air conditioning system ) cools the passenger compartment more quickly in hot weather. If the air in the car recirculates for too long, there is a risk of the windows misting.

V50 book w446.book Page 68 Thursday, September 9, 2004 10:27 AM

69

Climate control

Timer The timer function minimises the risk of icing, misting and bad air if recirculation is selected. See the Personal Preferences section, page 63, for how to activate and deactivate the function. Recirculation is always disen- gaged when you select Defroster (3).

Defroster Defroster quickly removes misting and ice from the windscreen and side windows.

Air is directed to the windows at high fan speed.

The LED in the defroster button lights when the function is active. The air condi- tioning system gives maximum dehumidifi- cation.

The air does not recirculate. Air distribution

The airflow can be distributed to the windows, dashboard vents or floor by pressing the air distribution buttons.

A symbol on the display above the climate control panel and a lit LED in the button indicate which function has been selected.

See the table on page 73.

AC - ON/OFF ON: Air conditioning is engaged. OFF: Air conditioning is disengaged. If Defroster (3) is activated the air condi- tioning is always engaged.

Heated front seats (option on certain markets)

To activate front seat heating:

Higher heat level Press the button once - both LEDs light.

Lower heat level Press the button twice - one LED lights.

Heat off Press the button three times - LEDs not lit.

Rear window and door mirror defrosters

Heating is used to quickly remove misting and ice from the rear window and door mirrors.

The rear window and door mirrors are defrosted simul-

taneously if the switch is pressed once. The function is active if one LED is lit in the switch.

The door mirror heating is deactivated automatically after approximately 6 minutes. The rear window heating is deactivated after approximately 12 minutes.

Temperature Select cooling or heating for both driver and passenger side.

V50 book w446.book Page 69 Thursday, September 9, 2004 10:27 AM

70

Climate control

Electronic climate control, ECC (option)

Control panel 1. Auto 2. Fan 3. Recirculation/Air quality system 4. Defroster 5. Air distribution 6. AC - ON/OFF 7. Heated front left seat 8. Heated front right seat 9. Rear window and door mirror defrosters 10. Temperature

Functions AUTO

The AUTO function automatically regulates climate control and maintains the desired temperature. The AUTO function controls heating, air

conditioning, fan speed, recirculation, and air distribution. If you select one or more manual functions, the other functions continue to be controlled automatically. All manual settings are switched off when AUTO is switched on. The display shows AUTO CLIMATE.

Fan Increase or decrease fan speed by turning the knob. The fan speed is regulated automatically if AUTO is selected and the previously set fan speed is disengaged.

NOTE! If the knob is turned anticlockwise and the fan indication on the display goes out, the fan and the air conditioning are switched off. The display shows the fan symbol and OFF.

V50 book w446.book Page 70 Thursday, September 9, 2004 10:27 AM

71

Climate control

Recirculation Recirculation can be used to shut out bad air, exhaust fumes, etc. from the passenger compartment. The air in the passenger compartment is recirculated.

No outside air is taken into the car when this function is activated. If the air in the car recir- culates for too long, there is a risk of misting on the insides of the windows.

Timer The timer function minimises the risk of icing, misting and bad air if recirculation is selected. See Personal Preferences, page 63, for how to activate and deactivate the function.

NOTE! When Defroster (4) is selected, recir- culation is always deactivated.

Air quality system (option) (same button as recircu- lation)

The air quality system consists of a multi-filter and a sensor. The filter separates gases and particles to

reduce the levels of odours and pollution in the passenger compartment. When the sensor detects polluted outside air, the air intakes are closed and the air in the passenger compartment is recirculated.

A green LED (A) lights in the button when the air quality sensor is active.

Activating the air quality sensor: Press the AUTO button (1) to activate the

air quality sensor (normal setting). Or:

Switch between three functions by pressing repeatedly the recirculation button.

Air quality sensor engaged - LED (A) lights.

No recirculation engaged, provided it is not required for cooling in hot weather - LED not lit.

Recirculation engaged - LED (M) lights. Keep in mind the following: As a rule, the air quality sensor should

always be engaged. Recirculation is limited in cold weather to

avoid misting. If the insides of the windows start misting

up, disengage the air quality sensor. The defroster function for the front, side

and rear windows can also be used to demist the windows.

Defroster Defroster quickly removes misting and ice from the windscreen and side windows. Air flows to the windows at high fan speed. The LED in the defroster

button lights when the function is active. The air conditioning system gives maximum dehumidification. The air is not recirculated.

Air distribution The airflow can be distributed to the windows, dashboard vents or floor by pressing the air distribution buttons.

A symbol on the display above the climate control panel and a lit LED in the button indicate which function has been selected.

See the table on page 73.

AC ON/OFF The air conditioning system is controlled automatically by the system when the ON LED is lit. This way, incoming air is sufficiently cooled and dehumidified. When the

OFF LED lights, the air conditioning system is always disengaged. Other functions are still

V50 book w446.book Page 71 Thursday, September 9, 2004 10:27 AM

72

Climate control

Electronic climate control, ECC (option)

controlled automa tically. When Defroster (4) is selected, the air conditioning system is set for maximum dehumidification.

Heated front seats (option on certain markets)

To activate front seat heating:

Higher heat level: Press the button once - both LEDs light.

Lower heat level: Press the button twice - one LED lights.

Heat off: Press the button three times - LEDs not lit.

Heated rear window and door mirrors Heating is used to quickly remove misting and ice from the rear window and door mirrors.

The rear window and door mirrors are defrosted simul-

taneously if the switch is pressed once. The function is active if one LED is lit in the switch. The door mirror heating is deactivated automatically after approximately 6 minutes. The rear window heating is deactivated after approximately 12 minutes.

Temperature selector The temperatures on the driver and passenger sides can be set independently.

Press the button once to activate one side. Press again to activate the other

side. Press the button a third time to activate both sides.

The active side is indicated by an LED in the button and on the display above the climate control panel.

When the car is started, the previous settings are resumed.

NOTE! Heating or cooling cannot be hastened by selecting a higher or lower temperature than the actual desired temperature.

V50 book w446.book Page 72 Thursday, September 9, 2004 10:27 AM

73

Climate control

Air distribution

Air distribution

Air distribution Use: Air distribution Use: Air to windows. Some air flows to the dashboard air vents. The air is not recircu- lated. Air conditioning is always engaged.

To remove ice and misting quickly.

Air to the floor and windows. Some air flows to the dashboard air vents.

To ensure comfortable condi- tions and good demisting in cold or humid weather.

Air to windscreen and side windows. Some air flows to the dashboard air vents.

To prevent misting and icing in a cold and humid climate. (Not for low fan speed.)

Air to floor and from dashboard air vents.

In sunny weather with cool outside temperatures.

Airflow to windows and from dashboard air vents.

To ensure good comfort in warm, dry weather.

Air to the floor. Some air flows to the dashboard air vents and windows.

To warm the feet.

Airflow to the head and chest from the dashboard air vents.

To ensure efficient cooling in warm weather.

Airflow to windows, from dashboard air vents and to the floor.

To provide cooler air for the feet or warmer air to the upper body in cold weather or hot, dry weather.

V50 book w446.book Page 73 Thursday, September 9, 2004 10:27 AM

74

Climate control

Fuel-driven parking heater (option)

General information about heaters The parking heater can be started immedi- ately or set with two different start times using TIMER 1 and TIMER 2. Here, start time refers to the time the car is heated and ready. The cars electronic system calculates when heating should be started based on the outside temperature. The heater is not run if the outdoor temperature exceeds 25 C. At temperatures of 10 C and below, the

maximum running time of the parking heater is 60 minutes.

Warning decal on fuel filler flap

WARNING! The car must be outdoors when the petrol or diesel heater is used.

WARNING! Switch off the fuel-driven heater before refuelling. Spilled fuel could be ignited by the exhaust gases. Check on the information display that the heater is off. (When the additional heater is running, PARK HEAT ON is shown on the information display.) WARNING!

The car must be outdoors when the petrol or diesel heater is used.

V50 book w446.book Page 74 Thursday, September 9, 2004 10:27 AM

75

Climate control

Activating the heater Enter the time when the car is to be used.

Press RESET (C) to enter the hours and minutes.

Press and hold the RESET button until the timer is activated.

Parking on a hill If the car is parked on a steep hill, the front of the car should point downhill to ensure that there is a supply of fuel to the parking heater.

Direct start Use the thumbwheel (B) to scroll to

DIRECT START. Press RESET (C) to access the options

ON and OFF. Select ON. The heater will now run for

60 minutes. Heating of the passenger compartment will begin as soon as the engine coolant has reached a temper- ature of 30 C.

Immediate stop of heater Use the thumbwheel (B) to scroll to

DIRECT START. Press RESET (C) to access the options

ON and OFF. Select OFF. NOTE! The car can be started and driven while the parking heater is still running.

Battery and fuel If the battery has insufficient charge or the fuel level is too low, the parking heater will be switched off automatically. A message appears on the information display. Acknowledge the message by pressing the READ button (A).

Setting TIMER 1 and 2 For safety reasons, you can only programme times for the following 24 hours, not several days in advance.

Scroll with the thumbwheel to TIMER. Touch RESET to move to the flashing

hours setting. Scroll with the thumbwheel to the desired

hour. Touch RESET to move to the flashing

minutes setting.

Scroll with the thumbwheel to the desired minute.

Touch RESET to confirm the setting. Press RESET to activate the timer. After

setting TIMER 1, a second start time can be programmed with TIMER 2 . Access this with the thumbwheel. Set the alter- native start time in the same way as TIMER 1.Important!

Repeated use of the parking heater combined with short journeys may discharge the battery and impair starting. If the heater is used regularly, the car must be driven for the same as the heater is run to ensure that the alternator has time to charge the battery.

V50 book w446.book Page 75 Thursday, September 9, 2004 10:27 AM

76

Climate control

Fuel-driven heater (option)

Messages on the display When TIMER 1, TIMER 2 and DIRECT START are activated, the information symbol on the combined instrument panel lights and an explanatory text appears on the infor- mation display. The display also indicates which timer is active when the driver removes the key from the ignition to leave the car.

Clock/timer If the car clock is reset after the heater timers are programmed, the selected times will be cancelled.

Additional heater (diesel) (certain countries)

Extra heat from the additional heater may be required in cold weather to reach the correct temperature in the passenger compartment.

The additional heater starts automatically when extra heat is required if the engine is running. It is switched off automatically when the correct temperature is reached or when the engine is switched off.

V50 book w446.book Page 76 Thursday, September 9, 2004 10:27 AM

77

Interior Front seats 78 Interior lighting 80 Storage spaces in the passenger compartment 82 Rear seat 84 Cargo area 86

V50 book w446.book Page 77 Thursday, September 9, 2004 10:27 AM

78

Interior

Front seats

Seating position The drivers and passenger seats can be adjusted to the optimum sitting and driving positions

1. Forward/backward: lift the handle to adjust the distance to the steering wheel and pedals. Check that the seat is locked after changing position.

2. Raise/lower the front of the seat cushion: pump up/down (option on passenger side).

3. Raise/lower the seat: pump up/down (option on passenger side).

4. Lumbar support (option, passenger side), turn the wheel.

5. Backrest rake: turn the wheel. 6. Control panel for power seat (option). Controls (2) and (3) are not present on all seat models.

Lowering the front seat backrest The passenger seat backrest can be folded forward to make room for long loads.

Move the seat as far back as possible. Adjust the backrest to an upright position

90 degrees. Lift the catches on the rear of the

backrest while folding it forwards.

WARNING! Adjust the position of the drivers seat before setting off, never while driving. Check that the seat is locked in position.

V50 book w446.book Page 78 Thursday, September 9, 2004 10:27 AM

79

Interior

Power seat (option) Preparations The seat is normally adjusted with the ignition key is in position I or II. It can also be adjusted within 10 minutes of the door being unlocked with the key or remote control. If the door is closed and the ignition key is not yet in the ignition, or is in the 0 position, adjustments can be made within 40 seconds of the door being closed.

Memory function in remote control The remote control used to unlock the car stores information about the changes made to the seat settings. When the car is next unlocked with the same remote control and

the door is opened within two minutes, the drivers seat returns to the stored position.

Seat with memory function (option) 1. Seat adjustment, memory 1 2. Seat adjustment, memory 2 3. Seat adjustment, memory 3 4. Storing preset positions Three positions can be stored. After adjusting the seat, press and hold button M (4) and then press button (1). Further seat settings can be stored in the memory using memory buttons (2) and (3).

Setting preset positions Press and hold one of the memory buttons (1), (2) or (3) until the seat stops. If you release the button, the seat stops immediately for safety reasons.

Seat adjustment The following can be set with switches (5), (6) and (7):

5. Backrest rake 6. Seat forward/backward and up/down 7. Front edge of seat cushion up/down Only one of the electric motors can be operated at a time. The power front seats have overload protection which is tripped if a seat is blocked by an object. If this happens, turn off the ignition (position 0) and wait

about 20 seconds before adjusting the seat again.

Emergency stop If the seat accidentally begins to move, press one of the buttons to stop the seat.

WARNING! Ensure that there is nothing in front of, behind, or under the seat during adjustment. Ensure that none of the backseat passengers will be trapped. To avoid injury, ensure that children do not play with the switches.

V50 book w446.book Page 79 Thursday, September 9, 2004 10:27 AM

80

Interior

Interior lighting

Front seat lighting 1. Lighting for left-hand side 2. Switch 3. Lighting for right-hand side The lighting in the front part of the passenger compartment is controlled with the buttons in the roof console.

Switch (2) has three positions for all passenger compartment lighting:

Off - right side depressed, passenger compartment lighting is switched off.

Neutral position - passenger compartment lighting comes on when a door is opened and goes out when the door is closed. The dimmer function is active.

On - left side depressed, passenger compartment lighting is on.

Automatic lighting The interior lighting switches on and off automatically when switch (2) is in the neutral position. See illustration.

The lighting comes on and remains on for 30 seconds if:

the car is unlocked from outside with the key or remote control.

the engine is stopped and the ignition key is turned to position 0.

The compartment lighting comes on and remains on for five minutes if:

one of the doors is open. the lighting is not switched off. The interior lighting is switched off when:

the engine is started. the car is locked from outside with the key

or remote control. The interior lighting is automatically switched off five minutes after the engine is switched off. The interior lighting can be switched on or off within 30 minutes of the key being turned to position 0 by briefly pressing button 2. The programmed times can be changed in accordance with the instructions in the Personal Preferences section, see page 59.

Rear seat lighting Turn the lights on or off by pressing the appropriate button. The lighting is turned off automatically ten minutes after the engine is switched off.

V50 book w446.book Page 80 Thursday, September 9, 2004 10:27 AM

81

Interior

Vanity mirror1

The light comes on automatically when the cover is lifted.

1. Option on certain markets.

V50 book w446.book Page 81 Thursday, September 9, 2004 10:27 AM

82

Interior

Storage spaces in the passenger compartment

V50 book w446.book Page 82 Thursday, September 9, 2004 10:27 AM

83

Interior

Storage spaces 1. Storage pocket (also on the front edge

of the front seat cushions). 2. Compartment in door panel. 3. Ticket clip. 4. Glovebox. 5. Waste bin (accessory). 6. Storage compartment and cup holder. 7. Storage compartment and cup holder.

Glovebox The owners manual and maps can be kept here. There are also holders for coins, pens and fuel cards. The glovebox can be locked with the removable key blade in the remote control. For further information about the key, see page 92.

Floor mats (option) Volvo supplies floor mats specially manufac- tured for your car. These should be properly anchored with the clips on the floor so they do not slide and get jammed beside or under the drivers pedals.

Important! The waste bin (5) must not be mounted if a phone handset is mounted on the right- hand side of the centre console.

WARNING! Ensure that no hard, sharp or heavy objects lie or protrude in such a way that they could cause injury during heavy braking. Always secure large and heavy objects with a seatbelt or cargo retaining straps.

V50 book w446.book Page 83 Thursday, September 9, 2004 10:27 AM

84

Interior

Rear seat

Centre rear head restraint All head restraints can be adjusted vertically to suit the height of the passenger. The upper edge of the head restraint should be aligned with the middle of the back of the head. Raise the head restraint if necessary. To lower the head restraint, press the button by the right- hand pillar at the same time as pushing down the head restraint.

To remove the head restraint, press the button by the right-hand pillar while lifting the head restraint.

Tipping the rear seat backrest The rear seat backrests can be tipped forwards together, or individually, to make it easier to transport long objects. To avoid damaging the seatbelts when folding the backrests up or down, these should be hooked onto the grab handles.

Hang the seatbelts on the hooks before lowering or raising the backrests.

Pull the straps (1) to fold the seat cushions forward.

Important! The head restraints can be damaged if they are not removed for loading. The centre head restraint must also be removed for heavy loads.

V50 book w446.book Page 84 Thursday, September 9, 2004 10:27 AM

85

Interior

Pull the lock (2) catch up and forward to release the backrest. A red indicator on the lock catch shows that the backrest is no longer locked in place.

Fold the backrest (3) forward halfway and remove the head restraint. The centre seats head restraint must be lowered fully or removed.

Place the head restraints in the plastic sleeves on the undersides (4) of the raised seat cushions.

NOTE! When the backrest has been raised, the red indicator should no longer be showing. If it is, the backrest is not locked in place.

WARNING! Remember to take down the seatbelts once you have raised the backrest.

V50 book w446.book Page 85 Thursday, September 9, 2004 10:27 AM

86

Interior

Cargo area

Safety grille (option) The safety grille is designed to help prevent loads or pets from being thrown forward in the passenger compartment in the event of sudden braking. For safety reasons, the grille must always be correctly fastened and secured.

Folding up If the safety grille is in the way it can be folded up to the roof:

Take hold of the bottom of the safety grille.

Pull straight backward and upward. Then release. The gas struts prevent the grille from dropping down.

To fold down the grille, do the reverse.

Removing Remove the safety grille as follows:

Fold the rear seat backrest forward slightly (to relieve the load from the gas struts).

Remove the caps from the nuts on either side that secure the safety grille.

Unscrew the nuts until the threads are flush with the edge of the nuts.

Turn the grille backward in the car slightly to release it from the trim. Do not angle the grille too much as it can become wedged, making it difficult to pull out.

Repeat for the other mounting and then carefully lift the grille out of the car.

Fitting To fit the safety grille:

Follow the instructions in the reverse order.

Tighten the two nuts to 24 Nm. If unsure about installing or removing the safety grille, consult an authorised Volvo workshop.

Cargo cover (option) Pull the cargo cover over the cargo area and hook it into the recesses in the rear pillars.

Fitting the cargo cover: Fit the cargo cover as follows:

The end pieces must be locked in their inner position.

Position the cover in the recesses in the side panels. Press the buttons to secure the cover in place.

Check that the end pieces are locked.

V50 book w446.book Page 86 Thursday, September 9, 2004 10:27 AM

87

Interior

Removing the cargo cover Remove the cargo cover as follows:

Press the buttons on the cargo cover and pull the end pieces out of the side panels. Release the buttons, lift the cover and remove it from the car.

Opening the storage cover Open the cover by pressing on the cargo

cover at the "PUSH" text (see illustration). Following which, lift up the cover. Closing the storage cover Close the cover by lowering it (in slightly

open position). Lock by pressing on the cargo cover (see

illustration) at the "PUSH" text. Safety net The retractable safety net1 storage cassette is mounted on the back of the rear seat backrest.

Using the safety net with raised backrests Pull out the safety net horizontally

backward. Extend the right hand attachment and hold it extended. Insert the attachment into the rear keyed recess in the roof panel. Press the attachment forward in the keyway. The attachment must be pressed so far that the flange

rides over the restriction between the front and rear holes.

Perform the same procedure on the other side. The attachments on the net spring shut. Pull the net over towards the left bracket to fit it in place.

Check that the attachments on the safety net are securely fastened in the keyed recesses in the roof panel.

Using the safety net with lowered backrests The safety net can also be used when the backrests are lowered. In this case, use the front attachment points in the roof panel.

Removing the safety net Pull one of the nets attachments

rearward to the large hole and pull it out. Detach the other attachment in the same

way.

1. Option on certain markets

V50 book w446.book Page 87 Thursday, September 9, 2004 10:27 AM

88

Interior

Cargo area

Removing the safety net cassette Lower the entire backrest. Press the cassette outward to release it

from the mounting brackets.

Using the safety net together with the cargo cover Tip the backrests slightly forward to

access the safety net cassette. Start with the 40% section.

Extend the safety net rearward. Fold the backrests back up. Hook the net into the attachment points in

the roof panel as described for raised backrests.

NOTE! When the backrest has been raised, the red indicator should no longer be showing. If it is, the backrest is not locked in place.

Load retaining eyelets The load retaining eyelets1 are used to fasten straps or nets to anchor items in the cargo area.

WARNING! Loads in the cargo area must be firmly secured even if the safety net is correctly fitted.

1. Option on certain markets.

V50 book w446.book Page 88 Thursday, September 9, 2004 10:27 AM

89

Interior

Electrical socket in the cargo area Fold down the cover to access the electrical socket. This socket works regardless of whether the ignition is on. If the ignition is switched off and an appliance requiring a current greater than 0.1 A is plugged into the electrical socket, a warning message appears on the information display. Avoid using the electrical socket with the ignition switched off due to the risk of running the battery flat.

Bag holder (option) The bag holder holds shopping bags in place and prevents them tipping over and spilling their contents.

Open the hatch in the cargo area. Secure the shopping bags with the strap.

V50 book w446.book Page 89 Thursday, September 9, 2004 10:27 AM

90

Interior

V50 book w446.book Page 90 Thursday, September 9, 2004 10:27 AM

91

Locks and alarm Remote control with key blade 92 Keyless drive (option) 95 Locking and unlocking 97 Child safety locks 99 Alarm (option) 100

V50 book w446.book Page 91 Thursday, September 9, 2004 10:27 AM

92

Locks and alarm

Remote control with key blade

Remote control The car is supplied with two remote controls. These also work as ignition keys. The remote controls contain a removable metal key blade for the manual locking and unlocking of the drivers door and the glovebox. A separate label with the code for key blade is included. Keep this label in a safe place. Take it to an authorised Volvo workshop when ordering new keys. A maximum of six remote controls/ key blades can be programmed and used for one car.

Loss of a remote control If you lose a remote control, take the car and the other remote control to an authorised Volvo workshop. The code of the missing remote control must be erased as a theft prevention measure.

Immobiliser The remote controls are fitted with coded chips. The code must be accepted by the reader (receiver) in the ignition switch. The car can only be started if the correct remote control with the correct code is used.

Remote control functions 1. Locking - Locks the doors and the

tailgate. Press and hold to close the windows and sunroof.

2. Unlocking - Unlocks the doors and tailgate. Press and hold to open the windows.

3. Approach lighting - When you approach the car: Press the yellow button on the remote control to switch on the interior lighting, position/parking lights, number plate lighting and door mirror lamps (option). The lighting is switched off automatically after 30, 60 or 90 seconds. For how to set the desired delay time, see page 64.

4. Tailgate - Press the button once to unlock the tailgate only.

5. Panic function - Used to attract attention in an emergency. Press and hold the red button for at least three seconds or press it twice within three seconds to activate the direction indicators and the horn. The function can be turned off with the same button once it has been active for at least five seconds. The function switches off automatically after 30 seconds.

Key blade This feature is intended for when leaving the car, such as for servicing or valet parking at a hotel. Hand over the remote control and keep the removable key blade.

Important! The narrow section of the remote control is particularly sensitive - this contains the chip. The car cannot be started if the chip is damaged.

V50 book w446.book Page 92 Thursday, September 9, 2004 10:27 AM

93

Locks and alarm

Removing the key blade To take the key blade out of the remote control:

Slide the spring-loaded catch (1) to the side while pulling the key blade (2) out.

Inserting the key blade Be careful when inserting the key blade into the remote control.

Hold the remote control with the narrow end pointing down and lower the key blade into its slot.

Lightly press the key blade to lock it in position. You should hear a "click".

Active locks 1. Active locks, remote control 2. Active locks, key blade

Key blade Use the key blade to lock and unlock the glovebox. You can also lock and unlock the drivers door with the key blade.

Weak remote control battery When the battery runs down and full functionality cannot be guaranteed, the infor- mation symbol and REMOTE BATTERY LOW VOLTAGE appear on the display.

V50 book w446.book Page 93 Thursday, September 9, 2004 10:27 AM

94

Locks and alarm

Remote control with key blade

Changing the remote control battery If the locks repeatedly fail to respond to signals from the remote control at a normal distance, the battery should be changed (type CR 2032, 3 volt).

Pull out the key blade. Place the remote control with the keypad

downward and remove the screw (1) using a small screwdriver.

Remove the cover. Carefully note the position of the batterys

+ and poles on the inside of the cover.

Prise out (2) and change the battery. Avoid touching the battery and its terminals with your fingers.

Refit the cover and screw it shut. Press the key blade back into place. Dispose of the old battery in an environmen- tally-friendly way.

V50 book w446.book Page 94 Thursday, September 9, 2004 10:27 AM

95

Locks and alarm

Keyless drive (option)

Keyless lock and ignition system The keyless drive system allows the car to be unlocked, driven and locked without the need for a key. You simply have to have the remote control with you in a pocket or bag.

The system makes it easier and more convenient to open the car, for example with shopping bags in one hand and a child in the other. It saves you having to take out or look for the remote control.

The two remote controls incorporate the keyless drive feature. You can order additional remote controls. The keyless drive system can handle up to six remote controls.

Remote control max. 1.5 m from the car To be able to open a door or the tailgate, the remote control must be within a maximum of approximately 1.5 m of the cars door handles or tailgate. The grey shaded area in the image shows the area covered by the systems antennae.

If someone leaves the car and takes with them a keyless drive remote control, a warning message appears on the information display while a reminder signal is heard. The warning message disappears when the remote control is brought back to the car or the ignition dial is turned to position I. The warning is only issued if the key dial is in position 1 or 2 after someone has opened and closed a door.

The warning message and reminder signal disappear when the remote control is brought back to the car after one of the following actions:

a door has been opened and closed the ignition dial has been turned to

position I the READ button has been pressed. Do not leave a remote control in the car If a keyless drive remote control is left in the car, it becomes passive when you lock the car. No unauthorised person can open the door. But if someone breaks into the car and finds the remote control, it can be activated and used again.

V50 book w446.book Page 95 Thursday, September 9, 2004 10:27 AM

96

Locks and alarm

Keyless drive (option)

Interference to remote control function Electromagnetic screening and fields can interfere with the keyless drive system. To avoid this:

Do not place the remote control near mobile phones, metallic objects or, for example, in a metal briefcase.

If interference is experienced nonetheless, use the remote control and key blade in the normal way. See page 92.

Unlocking Unlock the car by:

opening one of the doors with the handle or opening the tailgate by pressing the button.

Power seat (option) remote control with memory function If several people with keyless drive remote controls get into the car, the drivers seat will be adjusted for the person who opens the door first.

Locking Lock the doors and tailgate by:

pushing in the lock button on one of the door handles.

All doors and the tailgate must be closed before the lock button is pushed in. Otherwise they will not lock.

When the car is locked, the lock buttons on the inside of the doors retract in the normal way.

Personal settings for keyless drive The keyless drive system can be tailored to your personal requirements. Read more about personal settings on page 64.

V50 book w446.book Page 96 Thursday, September 9, 2004 10:27 AM

97

Locks and alarm

Locking and unlocking

Locking/unlocking the car from outside You can lock and unlock all the cars doors and the tailgate simultaneously using the remote control. The drivers door can be unlocked with the key blade.

Automatic relocking If none of the doors or the tailgate are opened within two minutes of unlocking, all are locked again automatically. This function prevents the car from being left unlocked unintentionally. For cars with alarms, see page 101.

Unlocking the tailgate To unlock only the tailgate:

Press the tailgate button on the remote control.

If all doors are locked when the tailgate is closed, then the tailgate remains unlocked until the car is locked with the remote control or from inside.

Locking/unlocking the car from inside All the doors and the tailgate can be locked or unlocked simultaneously using the switch by the door handle.

Unlocking Press the upper section of the lock

button. Press and hold to also open the side windows.

Locking Press the lower part of the lock button.

Press and hold to also close the windows and sunroof.

It is not possible to unlock a door by pulling up the lock button. All the doors can however

be locked manually with their respective lock buttons. Pull the door handle twice to unlock and open the door from the inside.

WARNING! Be aware that you can be locked in the car if it is locked from the outside.

V50 book w446.book Page 97 Thursday, September 9, 2004 10:27 AM

98

Locks and alarm

Locking and unlocking

Locking the glovebox The glovebox can only be locked and unlocked with the removable key blade in the remote control.

Unlock the glovebox (1) by turning the key a quarter of a turn (90 degrees) anticlockwise. The keyhole is vertical in the unlocked position.

Lock (2) the glovebox by turning the key a quarter of a turn (90 degress) clockwise. The keyhole is horizontal in the locked position.

1. Deactivation of the detectors 2. No function

Deadlocks When deadlocked, the doors cannot be opened from the inside if they are locked. The deadlocks are activated with the remote control. The deadlocks are set after a 25 second delay after the doors are locked.

The car can only be unlocked from a deadlock state with the remote control. The doors can also be opened from the outside with the key.

Temporary deactivation of the deadlocks and any detectors If someone is going to stay in the car but you still want to lock the doors from the outside, the deadlocks can be disabled.

Insert the key into the ignition switch, turn it to position II and then back to position I or 0.

Press button 1. If the car is equipped with an alarm, movement and tilt detectors are also deacti- vated. See page 101.

The LED in the button lights up until the car is locked with the key or the remote control. A message remains on the display as long as the key is in the ignition switch. The detectors are reactivated the next time the ignition is switched on.

WARNING! Do not allow anyone to remain in the car without first deactivating the deadlocks.

V50 book w446.book Page 98 Thursday, September 9, 2004 10:27 AM

99

Locks and alarm

Child safety locks

Manual child lock in rear left door

Manual child locks in the rear doors To lock manually: The child safety locks are found on the trailing edge of the rear doors and are only accessible when the doors are open. Use the key blade to turn the lock and thus activate or deactivate the child safety lock.

A. The doors cannot be opened from inside.

B. The doors can be opened from inside. Electric child locks: Press the switch on the drivers door. A message appears on the information display.

Switch for electric child safety locks and disengaging rear power window buttons.

Electric child safety locks and disabling the rear window buttons (option) When the electric child safety locks are activated, the rear window buttons are disabled.

To activate the child safety locks:

Turn the ignition key to position I or II. Press the switch. When the LED in the

switch is lit, the rear window buttons are disabled.

A message appears on the information display when the child safety locks are activated.

NOTE! Cars with electric child safety locks do not also have manual child locks.

Child safety locks activated A lit LED together with a text message on the display indicates that the locks are activated. The doors cannot be opened from inside. The power windows can only be operated with the controls on the drivers door.

WARNING! Always keep the lock buttons pulled up when driving. In the event of an accident, this allows the emergency services to get into the car quickly. Passengers in the rear seat cannot open the doors from inside if the child safety locks are activated.

V50 book w446.book Page 99 Thursday, September 9, 2004 10:27 AM

100

Locks and alarm

Alarm (option)

The alarm system When the alarm is armed, it continually monitors all alarm inputs.

The alarm is triggered if:

a door, the bonnet or the tailgate is opened.

the tailgate is opened. a non-approved key is used in the ignition

or if an attempt is made to force the lock. a movement is detected in the passenger

compartment (if fitted with a movement detector).

the car is raised or towed away (if fitted with a tilt detector).

a battery cable is disconnected. anyone tries to disconnect the siren.

Alarm LED on the dashboard An LED on the dashboard indicates the alarm systems status:

LED not lit - the alarm is not armed. The LED flashes once a second - the

alarm is armed. The LED flashes rapidly after disarming

the alarm and until the ignition is switched on - the alarm has been triggered.

If there is a fault in the alarm system, a message appears on the information display. Contact an authorised Volvo workshop.

NOTE! Do not attempt to repair or modify alarm system components. All such attempts may affect the terms of insurance.

Arming the alarm Press the LOCK button on the remote

control. A long flash from the cars direction indicators confirms that the alarm is armed and that all the doors are locked.

Disarming the alarm Press the UNLOCK button on the remote

control. Two short flashes from the cars direction indicators confirms that the alarm is disarmed and all doors are unlocked.

V50 book w446.book Page 100 Thursday, September 9, 2004 10:27 AM

101

Locks and alarm

Automatic alarm activation This function prevents you accidentally leaving the car without the alarm on.

If none of the side doors or the tailgate are opened within two minutes of disarming the alarm (and the car has been unlocked with the remote control), the alarm is automatically rearmed. The car is also locked.

Switching off a triggered alarm Press the UNLOCK button on the remote

control. Confirmation is given by two short flashes from the direction indicators.

Alarm signals When the alarm is triggered, the following happens:

A siren sounds for 30 seconds. The siren has its own battery which is used if the car battery has insufficient charge or is disconnected.

The direction indicators flash for five minutes or until the alarm is deactivated.

Remote control not working If for some reason the remote control is not working, the alarm can still be switched off and the car started as follows:

Open the drivers door with the key blade. The alarm is triggered and the siren sounds.

Insert the remote control into the ignition switch. The alarm is deactivated. The alarm LED flashes rapidly until the ignition key is turned to position II.

1. Deactivation of the detectors 2. No function

Temporary deactivation of the deadlocks and detectors To prevent the alarm being tripped errone- ously, such as during a ferry journey, the movement and tilt detectors can be tempo- rarily disengaged.

Turn the ignition key to position II and then back to position 0. Remove the key.

Press button (1). The LED in the button is lit until the car is locked.

A message remains on the display as long as the key remains in the ignition switch (and for 1 minute after the key is removed).

V50 book w446.book Page 101 Thursday, September 9, 2004 10:27 AM

102

Locks and alarm

Alarm (option)

The detectors are reactivated the next time the ignition is switched on.

If the car has deadlocks, these are also re- engaged.

Testing the alarm system Testing the movement detector in the passenger compartment Open all the windows. Arm the alarm. Activation of the alarm is

confirmed by the alarm LED flashing slowly.

Wait 30 seconds. Test the movement detector in the

passenger compartment, such as by lifting out a bag from a seat. A siren should sound and all direction indicators flash.

Deactivate the alarm by unlocking the car with the remote control.

Testing the doors Arm the alarm. Wait 30 seconds. Unlock the drivers door with the key

blade. Open one of the doors. A siren should

sound and all direction indicators flash. Deactivate the alarm by unlocking the car

with the remote control.

Testing the bonnet Sit in the car and deactivate the

movement detector. Arm the alarm. Remain in the car and lock

the doors with the button on the remote control.

Wait 30 seconds. Open the bonnet with the handle under

the dashboard. A siren should sound and all direction indicators flash.

Deactivate the alarm by unlocking the car with the remote control.

V50 book w446.book Page 102 Thursday, September 9, 2004 10:27 AM

103

Starting and driving General 104 Refuelling 105 Starting the car 106 Manual gearbox 109 Automatic gearbox 111 All-wheel drive 114 Brake system 115 Stability system 117 Parking assistance (option) 119 Towing and recovery 121 Start assistance 123 Driving with a trailer 124 Towing equipment 126 Detachable towbar 128 Loading 133 Adjusting headlamp pattern 134

V50 book w446.book Page 103 Thursday, September 9, 2004 10:27 AM

104

Starting and driving

General

Economical driving Driving economically means driving smoothly while thinking ahead and adjusting your driving style and speed to the prevailing conditions.

Get the engine warmed up as soon as possible.

Do not let the engine idle, but drive at light loads as soon as it is possible.

A cold engine consumes more fuel than a warm one.

Avoid sudden unnecessary acceleration and heavy braking.

Do not drive with unnecessary loads in the car.

Do not use winter tyres when the roads are dry.

Remove load carriers when they are not being used.

Avoid driving with open windows.

Slippery driving conditions Practise driving on slippery surfaces under controlled conditions to learn how the car reacts.

Engine and cooling system Under special conditions, for example when driving in hilly terrain, extreme heat or with

heavy loads, there is a risk that the engine and cooling system will overheat.

Avoid overheating the cooling system Maintain a low speed when driving with a

trailer up long, steep ascents. Do not turn the engine off immediately

you stop after a hard drive. Remove any auxiliary lamps from in front

of the grille if driving in extreme high temperatures.

Avoid overheating the engine Do not drive at more than 4500 rpm

when towing a trailer or caravan in hilly terrain, as the oil temperature can become too high.

Open tailgate Avoid driving with the tailgate open. If it is necessary to drive with the tailgate open for a short distance:

Close all windows. Set the air distribution to the windscreen

and floor and run the fan at high speed.

Do not overload the battery The electrical functions in the car load the battery to varying degrees. Avoid having the ignition key in position II when the engine is turned off. Use position I instead, as less power is used. The 12 volt outlet in the cargo area supplies power even when the ignition key is removed.

Examples of functions that use a lot of power:

ventilation fan windscreen wipers audio equipment (high volume) parking lights Also, be aware of different accessories that load the electrical system. Do not use functions which use a lot of power when the engine is switched off.

If the battery voltage is low, a message appears on the display. The energy-saving function shuts down certain functions or reduces the load on the battery by, for example, slowing the ventilation fan and switching off the audio equipment. Charge the battery by starting the engine.

WARNING! Do not drive with the tailgate open. Toxic exhaust fumes can be drawn into the car through the cargo area.

V50 book w446.book Page 104 Thursday, September 9, 2004 10:27 AM

105

Starting and driving

Refuelling

Switch off the fuel-driven heater before refuelling.

Opening the fuel filler flap Open the fuel filler flap with the button on the lighting panel, see page 45. The engine must be switched off before the flap can be opened. The fuel flap is located on the rear right wing.

Closing Push in the flap until you hear a click.

Fuel filler flap Turn the fuel cap until an obvious resistance is felt. Turn past the resistance until it comes to a stop. Take out the cap. Hang up the cap on the inside of the fuel filler flap. Put the petrol cap back after refuelling. Turn until one or more clear clicks are heard.

Filling up with fuel Fill the tank with fuel until the filler pump cuts out. Too much fuel can overflow in warm weather.

Fuel of a lower quality than that specified on page 218 should not be used as engine power and fuel consumption can be negatively affected.

Petrol

Diesel At low temperatures (5 C to 40 C), a paraffin precipitate may form in the diesel fuel, which can lead to ignition problems.WARNING!

Fuel which spills on to the ground can be ignited by the exhaust fumes. Switch off the fuel-driven heater before starting to refuel. Never carry an activated mobile phone when refuelling the ring signal could cause spark build-up and ignite petrol fumes, leading to fire and injury.

Important! Do not add cleaning additives to the petrol, unless recommended by Volvo.

Important! Use special winter grade fuel during cold months.

V50 book w446.book Page 105 Thursday, September 9, 2004 10:27 AM

106

Starting and driving

Starting the car

Depending on the engine temperature when the engine is started, the idling speed after a cold start may be higher than normal for certain engine types. Volvo strives to minimise exhaust emissions by having the engine exhaust system reach the correct operating temperature as quickly as possible.

NOTE! Never rev the engine hard immedi- ately after a cold start.

Before starting the engine Apply the parking brake (handbrake). Automatic gearbox: The ignition key must be in position II,

depress the brake pedal and move the gear selector to position P or N.

Manual gearbox: Put the gear lever in neutral and hold the

clutch pedal fully depressed. This is

particularly important in very cold condi- tions.

Starting the engine Petrol engine: Turn the ignition key to position III.

If the engine does not start within 5-10 seconds, release the key and try again.

Diesel engine: Turn the ignition key to position II. A lamp

on the combined instrument panel will come on indicating that the engine preheater is activated. Turn the key to position III when the lamp extinguishes.

Diesel particle filter (certain models) Certain diesel cars are equipped with a particle filter which results in additionally effective exhaust purification. When the engine is at its normal operating temperature (the engine is warm) a "regeneration" of the filter takes place automatically, which means that the particles collected in the filter are burned away and the filter is emptied.

Regeneration takes between five and ten minutes. During this time fuel consumption may increase slightly.

Winter driving If the car is frequently driven short distances in cold weather then the engine does not

reach normal operating temperature. This means that regeneration of the diesel particle filter does not take place and the filter is not emptied.

When the filter has become approx. 80% full of particles then the warning text ENGINE SERVICE REQUIRED is shown in the dashboard display. Regeneration should be carried out regularly if the car is frequently driven short distances in cold weather in order to avoid impaired function of the filter. Start regeneration of the filter by driving

the car until the engine reaches normal operating temperature, preferably on a main road or motorway. The car should then be driven for approximately 20 minutes more.

To clear the warning text when regener- ation is complete, switch off the ignition, remove the key, wait for at least three minutes and switch the ignition on again.

Use the parking heater (option) in cold weather so that the engine reaches normal operating temperature more quickly.

WARNING! Never remove the ignition key from the steering lock while driving or when the car is being towed. The ignition key must be in position (II) when the car is towed. The steering lock could otherwise be activated, making it impossible to steer the car.

Important! If the filter fills up with particles then it can be difficult to start the engine and the filter will be incapable of functioning and must then be replaced.

V50 book w446.book Page 106 Thursday, September 9, 2004 10:27 AM

107

Starting and driving

Ignition keys and electronic immobiliser The ignition key must not hang with other keys or metal objects on the same key ring. The electronic immobiliser could be activated accidentally.

Ignition switch and steering lock

0 Locked position The steering lock is activated when the key is removed from the lock.

I Radio position Certain electrical compo- nents can be switched on. The engines electrical system is not activated.

II Driving position The key position when driving. The cars electrical system is energised.

III Start position The starter motor is engaged. Release the key, which springs back automatically to the driving position, once the engine has started.

A ticking sound may be heard if the key is between positions. Turn the key to position II and back to eliminate the sound.

When the steering lock is activated If the front wheels are positioned so that there is tension in the steering lock, a warning message may be shown in the information display and the car prohibited from starting.

Remove the key and turn the steering wheel to release the tension.

Hold the steering wheel in this position. Reinsert the key and make a new attempt to start the car.

Make sure the steering lock is activated when the car is left to reduce the risk of theft.

WARNING! Never remove the ignition key from the ignition switch while driving or when the car is being towed. The steering lock could otherwise be activated, making it impossible to steer the car.

WARNING! Always remove the ignition key from the ignition when leaving the car, especially if there are children in the car.

V50 book w446.book Page 107 Thursday, September 9, 2004 10:27 AM

108

Starting and driving

Starting the car

Starting the car Instead of an ignition key, the car has an ignition dial. The dial is used in the same way as the key. The only difference is that to start the car, either the clutch pedal (manual gearbox car) or brake pedal (automatic gearbox car) must be depressed. This is a safety measure.

For the car to start, the cars passive remote control/key must be in the passenger or cargo area.

To start the car:

Depress the clutch or brake pedal. Press in and turn the dial to position III. Ignition dial or ignition key The car can be started with the dial or with the key.

To remove the ignition dial:

Push in the catch and pull out the dial.

V50 book w446.book Page 108 Thursday, September 9, 2004 10:27 AM

109

Starting and driving

Manual gearbox

Gear positions, five-speed Depress the clutch pedal fully with each gear change. Remove your foot from the clutch pedal between gear changes! Follow the appropriate shifting pattern.

For the best possible fuel economy, use the highest gear possible as often as possible.

Reverse gear inhibitor, five-speed Only engage reverse gear when the car is stationary. To engage reverse gear, the gear lever must first be put in position N. Reverse gear cannot therefore be engaged directly from fifth gear, because of the reverse gear inhibitor.

Gear positions, six-speed (petrol) Depress the clutch pedal fully with each gear change. Remove your foot from the clutch pedal between gear changes! Follow the appropriate shifting pattern.

For the best possible fuel economy, use the highest gear possible as often as possible.

It can be difficult to find the positions for fifth and sixth gear when the car is stationary as the reverse gear inhibitor (which blocks sideways movement towards reverse) is then not activated.

V50 book w446.book Page 109 Thursday, September 9, 2004 10:27 AM

110

Starting and driving

Manual gearbox

Reverse gear inhibitor, six-speed (petrol) Only engage reverse gear when the car is stationary.

Gear positions, six-speed (diesel) Depress the clutch pedal completely for each gear change. Remove your foot from the clutch pedal between gear changes. Follow the indicated gear pattern. For optimum fuel economy use the highest possible gear as often as possible.

Reverse gear inhibitor, six-speed (diesel) Only engage reverse gear when the car is stationary. To engage reverse gear, press the gear lever to the left past the spring-loaded inhibitor.

Important! The spring-loaded inhibitor can be forced when engaging 1st or 2nd gear if you apply too much pressure to the left when changing gear. This can lead to reverse being engaged when driving forwards.

V50 book w446.book Page 110 Thursday, September 9, 2004 10:27 AM

111

Starting and driving

Automatic gearbox

Cold start When starting in low temperatures, the gear changes can sometimes feel hard. This is due to the gearbox oils viscosity at low tempera- tures. To minimise engine emissions, the gearbox shifts up later than normal when the engine is started at low temperatures.

NOTE! Depending on the engine temper- ature when the engine is started, the idle speed after a cold start may be higher than normal for certain engine types.

Kick-down When the accelerator pedal is pressed all the way to the floor, beyond the position normally regarded as full acceleration, a lower gear is immediately engaged. This is known as kick-down.

If the accelerator is released from the kick- down position, the gearbox automatically changes up.

Kick-down is used when maximum acceler- ation is needed, such as for overtaking.

To prevent overrevving, the gearbox control program has a protective downshift inhibitor which prevents the kick-down function.

The kick-down function cannot be used in manual gear position (Geartronic).

Safety systems Cars with an automatic gearbox have special safety systems:

Keylock To remove the ignition key, the gear selector must be in the P position. The key is locked in all other positions.

Parking position (P) Stationary car with engine running:

Hold your foot on the brake pedal when moving the gear selector to another position.

Electric gear inhibitor Shiftlock Parking position (P position) To be able to move the gear selector from the P position to other gear positions, the ignition key must be in position II and the brake pedal must be depressed.

Shiftlock - Neutral (N position) If the gear selector is in the N position and the car has been stationary for at least three seconds (irrespective of whether the engine is running) then the gear selector is locked in the N position.

To be able to move the gear selector from the N position to another gear position, the brake pedal must be depressed and the ignition key must be in position II.

Disengaging shiftlock In certain cases, it may be necessary to move the car when it is not driveable, for example if the battery is flat. Proceed as follows to move the car:

There is a small cover behind P- R- N- D on the gear selector panel. Open the rear edge.

Insert the key blade from the remote control. Press down and hold the key blade. The gear selector can now be moved out of the P position.

V50 book w446.book Page 111 Thursday, September 9, 2004 10:27 AM

112

Starting and driving

Automatic gearbox

Mechanical gear selector inhibitor The gear selector can be moved freely between N and D. Other positions are locked with a latch that is released with the inhibitor button on the gear selector.

Press the inhibitor button to move the lever forward or back between the different gear positions.

Automatic gear positions P Parking position Select position P when you wish to start the engine or park the car.

NOTE! The brake pedal must be depressed to engage the P position.

The gearbox is mechanically blocked when P position is engaged. Always apply the parking brake when parking the car.

R Reverse The car must be stationary when R is selected.

N Neutral N is the neutral position. No gear is engaged and the engine can be started. Apply the parking brake when the car is stationary with the gear selector is in position N.

D Drive D is the normal driving position. Shifting up and down between the different gearbox ratios takes place automatically based on the level of acceleration and speed. The car should be stationary when the gear lever is moved from position R to position D.

Manual positions To move from the automatic driving position D to a manual position, move the gear selector to position M. To go from position M to the automatic driving position D, move the selector to position D.

While driving The manual gearshift mode can be selected at any time while driving. The engaged gear is locked until you choose another gear.

If the gear selector is moved to (minus) the car changes down a gear and engine brakes at the same time as the accelerator pedal is

Important! The car must be stationary when the P is selected.

V50 book w446.book Page 112 Thursday, September 9, 2004 10:27 AM

113

Starting and driving

released.. If the gear selector is moved to + (plus) the car changes up a gear.

The selected gear is indicated in the combined instrument panel (see page 38).

NOTE! Geartronic contains two safety functions:

Geartronic does not permit downshifting/ kick-down which would result in an engine speed high enough to damage the engine. Nothing happens if the driver tries to shift down in this way. The original gear remains engaged.

Geartronic automatically shifts down if the driver allows the speed to decrease lower than a level suitable for the selected gear, in order to avoid jerking and stalling.

W Winter The W button by the gear selector engages and disen- gages the winter programme W. The symbol W is shown in the combined instrument panel when the winter

programme is activated.

The winter programme starts the gearbox in a higher gear to facilitate starting off on slippery surfaces. The lower gears are only activated with kick-down when the winter programme is engaged.

The W programme can only be selected in position D.

To prevent overrevving, the gearbox control program has a protective downshift inhibitor.

V50 book w446.book Page 113 Thursday, September 9, 2004 10:27 AM

114

Starting and driving

All-wheel drive

All-wheel drive AWD All-wheel drive is always engaged.

All-wheel drive means that all four road wheels are driven at the same time. Power is automatically distributed between front and rear wheels. An electronically controlled clutch system distributes the power to the pair of wheels that grips best. This provides the best traction and prevents wheel spin.

Under normal driving conditions, the majority of power is transmitted to the front wheels.

All-wheel drive improves driving safety in rain, snow and icy conditions.

V50 book w446.book Page 114 Thursday, September 9, 2004 10:27 AM

115

Starting and driving

Brake system

Brake servo If the car is rolling or is being towed with the engine turned off, the brake pedal must be pressed about five times harder than when the engine is running. If the brake pedal is pressed when the engine is started, you will feel the pedal drop. This is normal and due to the brake servo becoming active. This may be more noticeable if the car has emergency brake assistance (EBA).

NOTE! If braking with the engine switched off, press the brake pedal sharply once, not repeatedly.

Brake circuits This symbol lights if a brake circuit is not working.

If a fault should occur in one of the circuits, it is still possible to brake the car. The brake pedal will travel further and may feel softer than normal. Harder pressure on the pedal is needed to produce the normal braking effect.

Dampness can affect braking characteristics Brake components become wet when the car is driven in heavy rain, through pools of water or when the car is washed. This may alter brake pad friction characteristics so that there is a delay before braking effect is noticed.

Press the brake pedal lightly from time to time if driving for long stretches in rain or slushy snow, as well as after setting off in very damp or cold weather. This warms up the braking surfaces and dries off any water. It is also recommended to do this before parking the car for a long period in such weather condi- tions.

If the brakes are used heavily When driving in the Alps or other roads with similar characteristics, the cars brakes are heavily loaded even if the brake pedal is not being depressed especially hard.

Because speed is often low, the brakes are not cooled as effectively as when driving on flat roads at higher speed.

So as not to overload the brakes, shift down when driving downhill instead of using the foot brake. Use the same gear driving downhill as you would use driving uphill. This

using engine braking more efficiently and requires the foot brake for only brief periods.

Bear in mind that driving with a trailer puts an additional load on the cars brakes.

Anti-lock braking system (ABS) The anti-lock braking system (ABS) prevents the wheels from locking up under braking. This means the ability to steer is

maintained and it is easier to swerve to avoid a hazard, for example.

After the engine has been started, the ABS will perform a brief self-test at a speed of about 20 km/h. This can be felt and heard as pulses in the brake pedal.

To get the most out of the ABS:

Press brake pedal with full force. Pulses will be felt.

Steer the car in the direction of travel. Do not release the pressure on the pedal.

Practice braking with the ABS system in a traffic-free area and in different weather conditions.

The ABS symbol lights up:

for about two seconds when the car is started if the ABS is disengaged due to a fault.

WARNING! The brake servo only works when the engine is running.

V50 book w446.book Page 115 Thursday, September 9, 2004 10:27 AM

116

Starting and driving

Brake system

Emergency brake assistance EBA (Emergency brake assistance) In case of sudden braking, full-strength braking is provided instantaneously. The EBA function senses when heavy braking is underway by registering how quickly the brake pedal is depressed. Continue braking without easing off on the brake pedal. The function is suspended when the pressure on the brake pedal eases. This function is always active and cannot be disengaged.

WARNING! If the BRAKE and ABS warning symbols are lit at the same time, a fault may have occurred in the brake system. If the level in the brake fluid reservoir is normal, drive carefully to the nearest authorised Volvo workshop to have the brake system checked. If the brake fluid is under the MIN level in the brake fluid reservoir, do not drive further before topping up the brake fluid. The reason for the loss of brake fluid must be investigated.

V50 book w446.book Page 116 Thursday, September 9, 2004 10:27 AM

117

Starting and driving

Stability system

When the system is in action, it may seem like the car does not respond normally to acceler- ation. This is because the system detects the amount of friction on the road surface and allows the different stability system functions to operate.

The car is either equipped with the stability and traction control system (STC) - or the dynamic stability and traction control system (DSTC).

Traction Control (TC) The Traction Control function transfers power from the spinning drive wheel to the drive wheel which has grip by braking the spinning drive wheel. To increase forward traction in this situation, it may be necessary to depress the accelerator more than usual. A pulsing sound is heard when Traction Control is working. This is completely normal. The TC function is most active at low speeds. It cannot be deactivated.

Spin Control (SC) The Stability Control function prevents the drive wheels from slipping during acceler- ation. This improves road safety on slippery surfaces. Under certain conditions, such as when driving with snow chains or in deep snow or sand, it may be beneficial to deactivate the SC function to increase traction. This is done with the STC/DSTC button.

Active Yaw Control (AYC) The Active Yaw Control function automati- cally brakes one or more wheels to stabilise the car in the event of a skid. If the brake pedal were to be depressed in this situation, it would feel more rigid than usual and a pulsing sound would be heard.

The AYC function is always active and cannot be deactivated.

STC/DSTC button The STC/DSTC button in the centre console is used to suppress or reactivate the system. When the LED in the button is lit, the system is active. The LED in the button goes out when the stability system has been suppressed. Other functions are not affected.

NOTE! To suppress the STC or DSTC function, the button must be pressed and held for at least half a second. The LED in the button goes out and STC/DSTC SPIN CONTROL OFF appears on the information display. The system is automatically activated every time the engine is started.

Function/ system

STC DSTC1

1. Option on certain markets.

TC X X SC X X AYC X

V50 book w446.book Page 117 Thursday, September 9, 2004 10:27 AM

118

Starting and driving

Stability system

Symbols on the combined instrument panel

The symbol lights and goes out again after about 2 seconds The symbol is lit for a system check when the car is started.

Flashing warning symbol The SC function is operating to prevent the cars drive wheels from spinning. The TC function is operating to improve the cars

traction. The AYC function is operating to prevent skidding.

The information symbol comes on and stays lit TRACTION CONTROL TEMPORARILY OFF is shown in the information display together

with the symbol. The TC function has been temporarily reduced due to too high brake temperature.

Automatic reactivation of the function takes place when the brake temperature has returned to normal.

The information symbol comes on and stays lit ANTI-SKID SERVICE REQUIRED appears on the information display together with the symbol. The STC

or DSTC system has been switched off because of a fault.

Stop the car in a safe place and turn off the engine.

Restart the engine. If the warning symbol remains lit, drive to a

workshop to have the system checked.

WARNING! Suppressing the STC or DSTC system may alter the driving characteristics of the car. Always take care when cornering and driving in slippery conditions.

V50 book w446.book Page 118 Thursday, September 9, 2004 10:27 AM

119

Starting and driving

Parking assistance (option)

Parking assistance front and rear

General Parking assistance is used as an aid to parking. A signal indicates the distance to a detected object.

The frequency of the signal increases as you come closer to an object1 in front of or behind the car.

The tone becomes constant at a distance of about 30 cm. If there are objects within this distance both behind and in front 1 of the car, the signal alternates between front and rear speakers.

If the volume of another sound source from the audio system is high, this is automatically lowered.

The system is always active when the car is started and the text message "Park Assist active Exit to deactivate" appears on the audio display.

Front parking assistance The distance covered to the front of the car is about 0.8 m.

Front parking assistance cannot be combined with extra lights because the sensors are affected by the extra lights.

Rear parking assistance The distance covered to the rear of the car is about 1.5 m.

NOTE! The system must be deactivated when driving with a trailer, bike carrier on the towbar or the like as they would trigger the sensors.

Rear parking assistance is deactivated automatically when towing a trailer if a Volvo genuine trailer cable is used.

Deactivating and reactivating the parking assistance The parking assistance can be deactivated by pressing EXIT on the control panel, see page 63. "Park Assist deactivated Enter to activate" will appear on the audio display. The parking assistance can be reactivated by pressing ENTER on the control panel. "Park Assistance active Exit to deactivate" will then appear on the audio display.

Front parking assistance The front parking assistance is active at speeds of below 15 km/h, even during reversing.

The signal comes from the front loudspeakers.

Rear parking assistance Rear parking assistance is activated when reverse gear is engaged. If the system is switched off, the text "Park Assist deactivated Enter to activate" will appear on the display as soon as reverse gear is engaged.

The signal comes from the rear loudspeakers.

Fault indicator The information symbol comes on and stays lit PARK ASSIST SERVICE REQUIRED is shown on the infor-

mation display in the centre of the combined instrument panel together with the symbol.

1. Provided that the parking assistance is mounted both front and rear.

WARNING! Parking assistance does not relinquish the drivers own responsibility during parking. The sensors have blind spots where objects cannot be detected. Be aware of children and animals near the car.

V50 book w446.book Page 119 Thursday, September 9, 2004 10:27 AM

120

Starting and driving

Parking assistance (option)

Parking assistance sensors

Cleaning the sensors The sensors must be cleaned regularly to ensure that they work properly. Clean them with water and car shampoo.

The sensors can react if covered by ice and snow.

V50 book w446.book Page 120 Thursday, September 9, 2004 10:27 AM

121

Starting and driving

Towing and recovery

Never tow the car to bump start it Jump start the car with a donor battery if the battery is flat and the engine does not start. Do not bump start the car.

Towing Find out the highest legal speed for towing before towing the car.

Turn the ignition switch to position II and unlock the steering lock so that the car can be steered, see page 106.

The ignition key must remain in position II while the car is being towed.

Automatic gearbox: Move the gear selector to position N. Manual gearbox: Move gear lever into neutral. Ensure the towrope is always taut to

avoid violent jerks. Keep your foot on the brake pedal.

Do not tow cars with an automatic gearbox faster than 80 km/h nor further than 80 km.

Recovery Cars with an automatic gearbox should not, if partly lifted, be towed at more than 80 km/h. They should not be towed further than 80 km.

Important! Bump starting the car can damage the catalytic converter.

WARNING! The steering lock stays in the position it was in when the power was cut off. The steering lock must be unlocked before towing. The ignition key must be in position II. Never remove the ignition key from the ignition switch while driving or when the car is being towed.

WARNING! The brake servo and power steering do not work when the engine is switched off. The break pedal must be pressed about five times harder than normal, and the steering will be considerable heavier than normal.

V50 book w446.book Page 121 Thursday, September 9, 2004 10:27 AM

122

Starting and driving

Towing and recovery

Towing eye Use the towing eye if the car needs to be towed on the road. The towing eye is attached in the recess on the right-hand side of the front or rear bumper. To fit the towing eye:

Take out the towing eye. This is stored under the floor hatch in the cargo area.

Release the bottom edge of the cover on the bumper with a screwdriver or coin.

Screw in the towing eye properly, right up to the flange. Use the wheel wrench to tighten the towing eye.

After use, unscrew the towing eye and return it in the cargo area. Refit the cover on the bumper.

Important! The towing eye is only designed for towing on roads, not for pulling the car unstuck or out of a ditch. Call a recovery service for assistance.

V50 book w446.book Page 122 Thursday, September 9, 2004 10:27 AM

123

Starting and driving

Start assistance

Starting with a donor battery If the battery in the car has become flat, you can "borrow" electric current from either a separate battery or the battery in another car. Always make sure the crocodile clips on the jump leads are attached securely to eliminate sparks during the start attempt.

When jump starting the car, the following steps are recommended to avoid risk of explosion:

Turn the ignition key to position 0. Ensure that the other battery is 12 volt. If the donor battery is in another car,

switch off the engine in the other car and

ensure that the cars do not touch one another.

Connect the red jump lead between the positive terminal on the donor battery (1+) and the one in your car (2+).

Connect one end of the black jump lead to the donor batterys negative terminal (3).

Connect the other end of the black jump lead to the earthing point (4) by the left- hand strut tower.

Start the engine of the "donor car". Let the engine run a few minutes at a speed slightly higher than idle 1500 rpm.

Start the engine of the car with the flat battery.

Remove the jump leads, first the black and then the red. Ensure that neither end of the black jump lead comes into contact with the batterys positive terminal or the crocodile clip on the red jump lead.

Do not touch the crocodile clips during the start procedure. This could cause sparking.

WARNING! The battery can generate oxyhydrogen gas, which is highly explosive. One spark, which can be generated if you connect the jump leads incorrectly, is sufficient to make the battery explode. The battery contains sulphuric acid, which can cause serious burns. If the acid comes into contact with eyes, skin or clothing, flush with large quantities of water. If acid splashes into the eyes, seek medical attention immediately.

V50 book w446.book Page 123 Thursday, September 9, 2004 10:27 AM

124

Starting and driving

Driving with a trailer

General The load capacity is affected by extra acces- sories mounted on the car, such as a towbar, the load on the towball (75 kg with trailer hitched), load carriers and roof box, as well as the passengers combined weight. The load capacity of the car is reduced by the number of passengers and their weight.

If the towing bracket is mounted at the Volvo factory, the car is delivered with the necessary equipment for driving with a trailer.

The cars towing bracket must be of an approved type.

If the towbar is retrofitted, check with your Volvo dealer that the car is fully equipped for driving with a trailer.

Distribute the load on the trailer so that the weight on the towing bracket follows the specified maximum towball load.

Increase the tyre pressure to the recom- mended pressure for a full load. See page 139 for the location of the tyre pressure label.

Clean the towbar regularly and grease the towball1.

Do not tow a heavy trailer when the car is brand new. Wait until it has been driven at least 1000 km.

The brakes are loaded much more than usual on long and steep downhill slopes. Downshift to a lower gear and adjust your speed.

The engine is loaded more heavily than usual when driving with a trailer.

The engine and gearbox can overheat if the car is driven with a heavy load in hot weather. If the temperature gauge for the engines cooling system goes into the red zone, stop and let the engine idle for a few minutes. The gearbox responds through a built-in protection system. See the message on the information display. If the car overheats, the air conditioning may be switched off temporarily.

In the interests of safety, speed should be restricted to 80 km/h, even if the laws of certain countries allow for higher speeds.

The gear selector should be in the parking position P when a car with an automatic gearbox and attached trailer are parked. Always use the parking brake.

Place chocks under the wheels to prevent the car from rolling when parked on a hill with trailer attached. The gear selector should be in the parking position P when

a car with an automatic gea rbox and attached trailer are parked. Always use the parking brake.

Trailer weights See page 211 for permitted trailer weights.

NOTE! The stated maximum permitted trailer weights are those permitted by Volvo. National vehicle regulations can further limit trailer weights and speeds. Towbars can be certified for higher towing weights than the car can actually tow.

1. Does not apply to the towball if using a stabiliser hitch.

WARNING! Follow the stated recommendations for trailer weights. Otherwise, the rig may be difficult to control during evasive manoeuvres and braking.

V50 book w446.book Page 124 Thursday, September 9, 2004 10:27 AM

125

Starting and driving

Automatic gearbox, driving with a trailer Parking on a hill: Apply the parking brake (handbrake). Move gear selector to the parking

position P. Starting on a hill: Move the gear selector to driving

position D. Release the parking brake (handbrake). Steep inclines: Select an appropriate manual gear

position when climbing steep inclines or at low speeds. This prevents the gearbox from changing up and keeps the gearbox oil cooler.

Do not use a higher manual gear than the engine can "handle". It is not always economical to drive in high gears.

Avoid driving with a trailer on inclines of more than 15%.

Diesel engine with manual gearbox, driving with a trailer If the car is driven with a heavy load in hot weather then the engine cooling fan should be replaced with a cooling fan with greater capacity than the fan fitted as standard. This is to avoid temporary shut down of the car's

air conditioning and temporary reduction in engine torque. Consult your Volvo dealer for information regarding your car's specifica- tions.

V50 book w446.book Page 125 Thursday, September 9, 2004 10:27 AM

126

Starting and driving

Towing equipment

Towbars The towball must be cleaned and greased regularly. If a towball hitch with vibration damper is used, it is not necessary to grease the towball.

If the car is equipped with a detachable towbar, the towball mounting instructions must be followed carefully, see page 128.

NOTE! Always take off the towball section after use. Keep it in the cargo area.

Trailer cable An adapter is required if the cars towbar has 13 pin electrics and the trailer has 7 pin electrics. Use an adapter cable approved by Volvo. Make sure the cable does not drag on the ground.

WARNING! Be sure to attach the trailers safety cable to the correct place.

WARNING! If the car is fitted with a Volvo detachable towbar: Follow the assembly instructions for the towball section carefully. The towball section must be locked with the key before setting off. Check that the indicator window shows green.

V50 book w446.book Page 126 Thursday, September 9, 2004 10:27 AM

127

Starting and driving

Specifications Distance A Fixed towbar: 1100 mm

Detachable towbar: 1100 mm

Maximum ball load: 75 kg

Distance B Fixed towbar: 72 mm

Detachable towbar: 72 mm

V50 book w446.book Page 127 Thursday, September 9, 2004 10:27 AM

128

Starting and driving

Detachable towbar

Fitting the towball Remove the guard plug.

Ensure that the mechanism is in the unlocked position by turning the key clockwise.

Check that the indicator window (3) shows red. If the window does not show red, press in (1) and turn the locking wheel anticlockwise (2) until you hear a click.

V50 book w446.book Page 128 Thursday, September 9, 2004 10:27 AM

129

Starting and driving

Insert the towball section until your hear a click.

Check that the indicator window shows green.

Turn the key anticlockwise to the locked position. Remove the key from the lock.

V50 book w446.book Page 129 Thursday, September 9, 2004 10:27 AM

130

Starting and driving

Detachable towbar

NOTE! Check that the towball section is secure by pulling it up, down and back. If the towball section is not fitted correctly then it must be removed and refitted in accordance with the previous steps.

NOTE! The trailers safety cable must be attached to the attachment on the towbar.

V50 book w446.book Page 130 Thursday, September 9, 2004 10:27 AM

131

Starting and driving

Removing the towball Insert the key and turn it clockwise to the

unlocked position.

Push in the locking wheel and turn it anticlockwise until you hear a click.

Turn the locking wheel down fully, until it comes to a stop. Hold it in this position while pulling the towball rearward and upward.

V50 book w446.book Page 131 Thursday, September 9, 2004 10:27 AM

132

Starting and driving

Detachable towbar

Insert the guard plug.

V50 book w446.book Page 132 Thursday, September 9, 2004 10:27 AM

133

Starting and driving

Loading

General The load capacity is affected by extra acces- sories mounted on the car, such as a towbar, the load on the towball (75 kg with trailer hitched), load carriers and roof box, as well as the passengers combined weight. The cars load carrying capacity is reduced by the number of passengers and their weight.

Loading the cargo area Stop the engine and apply the parking brake when loading or unloading long objects. The gear lever or gear selector can be knocked out of position by long loads, which could set the car in motion. To increase the size of the cargo area, the head rests can be removed and the seats folded down, see page 84.

Place the load firmly against the backrest in front.

The head rests can be removed so that they are not damaged.

Put wide loads in the centre.

Heavy objects should be placed as low as possible. Avoid placing heavy loads on a lowered backrest.

Cover sharp edges with something soft to avoid damaging the upholstery.

Secure all loads to the load retaining eyelets with straps or web lashings.

Load carriers To avoid damaging the car and for maximum possible safety while driving, it is recom- mended to use load carriers specially designed for your car by Volvo.

Carefully follow the mounting instructions supplied with the carriers.

Check periodically that the load carriers and load are properly secured. Lash the load securely with retaining straps.

Distribute the load evenly over the load carriers. Put the heaviest objects at the bottom.

The size of the area exposed to the wind, and therefore fuel consumption, increase with the loads size.

Drive gently. Avoid quick accelerations, heavy braking and taking curves hard.

WARNING! The cars driving characteristics change depending on how heavily it is loaded and how the load is distributed.

WARNING! A loose object weighing 20 kg can, in a front-on collision at a speed of 50 km/h, carry the impact of an item weighing 1000 kg.

WARNING! Never load cargo above the backrest. The protection provided by the inflatable curtain in the headlining may be compro- mised or eliminated by high loads. Always secure the load. During heavy braking the load may otherwise shift, causing personal injury.

WARNING! Load no more than 75 kg on the roof, inclusive of the load carriers and any roof box. The cars centre of gravity and driving characteristics are altered by roof loads.

V50 book w446.book Page 133 Thursday, September 9, 2004 10:27 AM

134

Starting and driving

Adjusting headlamp pattern

A. Headlamp pattern for left-hand traffic B. Right-hand traffic

Correct light pattern for left or right-hand traffic The headlamps projection can be adjusted to avoid dazzling other motorists. The correct pattern will also better illuminate the verge.

Halogen lights Halogen headlamps The headlamp control should be in position (A) for left-hand traffic and position (B) for right-hand traffic.

Bi-Xenon lights Bi-Xenon headlamps The headlamp control should be in position (A) for left-hand traffic and position (B) for right-hand traffic.

WARNING! On cars with Bi-Xenon headlamps, all work on the lights should be carried out at an authorised Volvo workshop. Bi-Xenon headlamps must be handled with extreme care due to the high-voltage unit.

V50 book w446.book Page 134 Thursday, September 9, 2004 10:27 AM

135

Wheels and tyres General 136 Tyre pressure 139 Changing wheels 140 Warning triangle and spare wheel 141 Removing wheels 142 Emergency puncture repair 144

V50 book w446.book Page 135 Thursday, September 9, 2004 10:27 AM

136

Wheels and tyres

General

Driving characteristics and tyres The tyres greatly affect the cars driving characteristics. The type of tyre, dimensions, tyre pressure and speed rating are important for how the car performs.

When changing tyres, ensure that tyres of the same type and dimensions, and preferably also the same make, are fitted to all four wheels. Follow the recommended tyre pressures specified on the tyre pressure label, see page 139.

Designation of dimensions The dimensions are stated on all car tyres. Example: 205/55R16 91 W.

Speed ratings The car is approved as a whole, which means that dimensions and speed ratings must not differ from those specified on the vehicles registration document. The only exception to these conditions is winter tyres (both those with metal studs and those without). If such a tyre is chosen, the car must not be driven

faster than the speed rating of the tyre (for example, class Q can be driven at a maximum of 160 km/h).

Remember that traffic regulations determine how fast a car can be driven, not the speed class of the tyres.

Note! Maximum permitted speeds indicated.

New tyres Tyres are perishable. After a few years they begin to harden at the same time as the friction capacity/charac- teristics gradually deteri- orate. Therefore aim to get

as fresh tyres as possible when you replace them. This is especially important with regard to winter tyres. The week and year of manufacture are stated with four digits, for example 1502. The tyre in the illustration was manufactured in week 15 of 2002.

Tyre age Even if tyres have a theoretical lifespan of up to ten years, it is not recommended to drive on tyres which are more than six years old.

205 Section width (mm) 55 Ratio between section height and

width (%) R Radial ply 16 Rim diameter in inches (") 91 Tyre load index (in this case 615 kg) W Speed rating (in this case 270 km/h)

Q 160 km/h (used only on winter tyres)

T 190 km/h H 210 km/h V 240 km/h W 270 km/h Y 300 km/h

V50 book w446.book Page 136 Thursday, September 9, 2004 10:27 AM

137

Wheels and tyres

Tyres with tread wear indicators Tread wear indicators are narrow treadless bands across the width of the tread. On the side of the tyre are the letters TWI (tread wear indicator). When only 1.6 mm of tread remains, this band is clearly visible. Change the tyres as soon as possible. Remember that tyres with little tread depth provide very poor grip in rain and snow.

Winter tyres Volvo recommends winter tyres with parti- cular dimensions. These are stated on the tyre pressure label, see page 139 for its location. The tyre dimensions are dependent

on the engine variant. When driving on winter tyres, these must be fitted to all four wheels.

NOTE! Ask a Volvo dealer which rim and tyre types are most suitable.

Studded tyres Studded winter tyres should be run in gently for 500-1000 km so the studs settle properly into the tyre. This gives the tyre, and especially the studs, a longer lifespan.

NOTE! The legal provisions for the use of studded tyres vary from country to country.

Tread depth Road conditions with ice, slush and low temperatures place considerably higher demands on tyres than summer conditions. It is therefore not recommended to drive on winter tyres that have a tread depth of less than four millimetres.

Snow chains Snow chains may only be used on the front wheels. This also applies to all-wheel-drive cars.

Never drive faster than 50 km/h with snow chains. Avoid driving on bare ground as this wears out both the snow chains and tyres. Never use quick-fit snow chains as the space

between the brake disks and the wheels is too small.

Important! Use Volvo genuine snow chains or equivalent chains designed for the car model, and tyre and rim dimensions. Consult an authorised Volvo workshop.

V50 book w446.book Page 137 Thursday, September 9, 2004 10:27 AM

138

Wheels and tyres

General

Standard (1) and bulge acorn (2) wheel nuts

Rims and wheel nuts Only use rims that are tested and approved by Volvo and which are Volvo genuine acces- sories. There are two types of wheel nut, depending on whether the rims are made of steel or aluminium. Tighten the wheel nuts to 85 Nm. Check the torque with a torque wrench.

Steel rims standard wheel nuts (1) Steel rims are normally mounted with the standard wheel nuts, but the bulge acorn variety may also be used.

Aluminium rims bulge acorn wheel nuts (2) Only use the bulge acorn variety of nuts with aluminium rims. These differ markedly from other nut types as they have a rotating conical washer.

NOTE! These nuts may also be used with steel rims.

Locking wheel nuts Locking wheel nuts can be used on both aluminium and steel rims. If steel rims with locking nuts are used in combination with wheel covers, the locking wheel nut should be mounted on the bolt nearest the air valve. Otherwise the wheel cover cannot be fitted to the rim.

Temporary spare The spare wheel1 is only intended to be used for the short time it takes to get the ordinary wheel replaced or repaired. Replace the spare wheel as soon as possible with a normal wheel. The cars handling may be altered by the use of the spare wheel.

Never drive faster than 80 km/h with a spare wheel on the car.

Important! The wheel nuts should be tightened to 85 Nm. Overtightening can damage the nuts and the bolts.

WARNING! Never use standard nuts for aluminium rims. The wheels can come loose.

1. Certain variants and markets

Important! The car must never be driven fitted with more than one temporary spare wheel.

V50 book w446.book Page 138 Thursday, September 9, 2004 10:27 AM

139

Wheels and tyres

Tyre pressure

Recommended tyre pressure The tyre pressure decal on the inside of the fuel filler flap shows what pressure the tyres should have with different load and speed conditions.

Checking the tyre pressure Check the tyre pressure regularly. The correct tyre pressure is shown in the tyre pressure table. The stated tyre pressures refer to cold tyres. (Cold tyres mean the tyres are the same temperature as the ambient temperature.)

Driving with the wrong tyre pressure adversely affects the cars driving characte- ristics and can increase tyre wear. After just a few kilometres of driving, the tyres warm up and the pressure increases. Therefore air should not be released if the pressure is checked when the tyres are warm. However the pressure should be increased if it is too low.

V50 book w446.book Page 139 Thursday, September 9, 2004 10:27 AM

140

Wheels and tyres

Changing wheels

The arrow shows the tyres direction of rotation.

Summer and winter wheels When summer and winter wheels are changed they should be marked with which side of the car they were mounted on, for example L for left and R for right. Tyres with a tread pattern which are designed to only turn in one direction have the direction of rotation marked with an arrow. The tyre should always rotate in the same direction throughout its lifespan. Tyres should only be switched between front and rear positions, never between left and right-hand sides, or vice versa. If the tyre is mounted incorrectly, the cars braking characteristics and capacity to force rain, snow and slush out of the way are

adversely affected. Tyres with the greatest tread depth should always be fitted to the rear of the car (to decrease the risk of skidding.)

Wheels should be stored lying down or hanging up, and not standing up.

Contact an authorised Volvo workshop if you are uncertain about tread depth.

V50 book w446.book Page 140 Thursday, September 9, 2004 10:27 AM

141

Wheels and tyres

Warning triangle and spare wheel

Warning triangle Follow the regulations for the use of a warning triangle1. Place the warning triangle in a suitable place with regard to the traffic.

Undo the case containing the warning triangle, it is attached with Velcro. Take the warning triangle out of the case.

Lower the warning triangles support legs. Ensure the warning triangle and its case are properly secured in the cargo area after use.

Spare wheel and jack The cars original jack

The original jack2 should only be used for changing wheels. The jacks thread should always be well greased.

The spare wheel, jack and wheel spanner are found under the floor in the cargo area.

Taking out the spare wheel: Fold the rear edge of the floor mat

forward. Release the spare wheel and lift it out. Take out the jack and the wheel spanner.

Putting the spare wheel and jack into the cargo area: Wind the jack to halfway (1). The marking

on the plate (2) should line up with the marking on the arm (3) so that the jack can fit lying down in the holder.

Fold in the handle (4) and place the wheel spanner (5) on the jack.

Put the jack back (1) in the hole on the right (6). Fasten the spare wheel (7) in the hole on the left (8).

1. Certain markets 2. Certain variants and markets

V50 book w446.book Page 141 Thursday, September 9, 2004 10:27 AM

142

Wheels and tyres

Removing wheels

Set up the warning triangle if a wheel must be replaced at a busy location. Make sure that the car and jack are on a firm horizontal surface.

Take out the spare wheel, jack and wheel spanner, which are found under the carpet in the cargo area.

Apply the parking brake and engage first gear, or position P if the car has an automatic gearbox.

Place chocks in front of and behind the wheels which will remain on the ground. Use heavy wooden blocks or large stones.

Cars with steel rims have removable wheel covers, Prize off the wheel cover with the end of the wheel spanner, or pull it off by hand.

Loosen the wheel nuts -1 turn antic- lockwise with the wheel spanner.

On each side of the car are two jacking points. Wind down the jacks base so that it sits level on the ground. Check that the jack is seated correctly in the jacking point, as illustrated, and that the base is located directly under it.

Jack up the car high enough that the wheel is clear of the ground. Remove the wheel nuts and lift off the wheel.

V50 book w446.book Page 142 Thursday, September 9, 2004 10:27 AM

143

Wheels and tyres

Fitting the wheel Clean the contract surfaces on the wheel

and hub. Put on the wheel. Tighten the wheel nuts. Lower the car so that the wheel cannot

rotate. Tighten the wheel nuts crosswise. It is

important that the wheel nuts are tightened properly. Tighten to 85 Nm. Check the torque with a torque spanner.

Put on the wheel cover (steel rim).

WARNING! Never crawl under the car when it is raised on the jack. Passengers must leave the car when it is raised on the jack. Ensure that passengers wait with the car - or preferably a crash barrier - between them and the road.

V50 book w446.book Page 143 Thursday, September 9, 2004 10:27 AM

144

Wheels and tyres

Emergency puncture repair

General Cars which do not have a spare wheel are instead equipped with an emergency puncture repair kit. This kit can be used to both seal the puncture and to check and adjust the tyre pressure. The kit consists of an electric air compressor and an integrated canister with sealing liquid.

Emergency p uncture repair kit The emergency puncture repair kit1 is only intended to work as a temporary repair so that the car can be driven a further 200 km (max.) or to the nearest tyre centre. The

sealing fluid has the ability to effectively seal tyres which have punctures in the tread.

The canister with the sealing fluid should be replaced before the best-before date has expired or after the emergency repair kit has been used. Puncture repair kit replacement, see page 149 for canister replacement.

NOTE! The emergency puncture repair kit is only intended for sealing tyres with a puncture in the tread.

1. Certain variants and markets

V50 book w446.book Page 144 Thursday, September 9, 2004 10:27 AM

145

Wheels and tyres

The emergency puncture repair kit has limited abilities to seal tyres which have punctures in the wall of the tyre. Do not seal tyres with the emergency puncture repair kit if they have larger slits, cracks, irregularities or similar damage.

The emergency puncture repair kit with compressor and tools are found under the floor in the cargo area.

12 V sockets for the compressor are located by the centre console in the front, by the rear seat and in the cargo area. Choose the electrical socket that is nearest the punctured tyre.

Taking out the emergency puncture repair kit Fold away the rear edge of the floor mat

forward. Lift up the emergency puncture repair kit.

WARNING! The sealing fluid may cause irritation if it comes into direct contact with skin. In the case of contact with skin, wash away the fluid with soap and water.

V50 book w446.book Page 145 Thursday, September 9, 2004 10:27 AM

146

Wheels and tyres

Emergency puncture repair

Inflating tyres Set up the warning triangle if a tyre must be inflated in an area close to traffic.

Ensure that the orange switch (2) is in position 0 and take out the lead (5) and air hose (4) from the side compartment (3).

Screw the air hoses valve connection to the bottom of the thread on the tyres air valve.

Connect the lead (5) to one of the cars 12 V sockets.

Start the engine. The car must be in a well-ventilated place.

Start the compressor by flicking the switch (2) to position I.

Pump up the tyre to the pressure specified on the tyre pressure label.

Turn off the compressor, the switch (2) should be in position 0. Detach the air hose and unplug the lead. Replace the valves dust cap.

Put the lead (5) and air hose (4) into the side compartment (3).

Put the puncture repair kit back under the floor in the cargo area.

The compressor should not run for more than ten minutes at a time. Let it cool afterwards as there is a risk of overheating.

Objects with a volume of up to 50 litres can be pumped up with the compressor.

WARNING! Inhaling car exhaust fumes can result in danger to life. Never leave the engine running in sealed areas or areas that lack sufficient ventilation.

V50 book w446.book Page 146 Thursday, September 9, 2004 10:27 AM

147

Wheels and tyres

Sealing punctured tyres Set up the warning triangle if emergency tyre repairs must be carried out in an area where there is other traffic.

Remove the decal (1) regarding the highest permitted speed from the emergency puncture repair kit and stick it on the steering wheel where it can be clearly seen by the driver.

Ensure that the orange switch (2) is in position 0 and take out the lead (5) and air hose (4) from the side compartment (3).

Screw the air hoses valve connection to the bottom of the thread on the tyres air valve.

Connect the lead (5) to one of the cars 12 V sockets.

Release the safety catch (6) and turn the orange-coloured part (7) 90 degrees to the vertical position, until a click is heard.

Start the engine. The car must be in a well-ventilated place.

Start the compressor by flicking the switch (2) to position I. The pressure may increase temporarily up to a maximum of 4 bar while the sealing liquid is being

pumped in. After about one minute, the pressure will drop and the pressure gauge show a more correct tyre pressure.

Pump the tyre to a pressure of between 1.8 bar and 3.5 bar. If the pressure does not reach 1.8 bar after ten minutes of pumping, the compressor should be turned off so it does not overheat.

Undo the air hose (4) from the air valve and put the dust cap back on. Unplug the lead (5) from the electrical socket. Fold the orange-coloured part (7) back into its original position and secure the catch (6). Keep the emergency repair kit in a safe place in the car.

WARNING! Inhaling car exhaust fumes can result in danger to life. Never leave the engine running in sealed areas or areas that lack sufficient ventilation.

V50 book w446.book Page 147 Thursday, September 9, 2004 10:27 AM

148

Wheels and tyres

Emergency puncture repair

Immediately drive about 3 km, at a maximum speed of 80 km/h, to allow the sealing fluid to seal the tyre well.

Check the tyre pressure again: NOTE! Do not raise the orange-coloured part (7) when only the compressor is to be used for inflation.

Connect the air hose (4) to the air valve on the tyre. Connect the lead (5) to the 12 V power point. Read the pressure on

the compressor. If the tyre pressure is below 1.3 bar, the tyre has not been suffi- ciently well sealed. The journey should not be continued under these circums- tances. Contact a tyre centre.

If the tyre pressure is higher than 1.3 bar, the tyre should be pumped up to the pressure stated on the tyre pressure label, see page 139 for its location. Release pressure with the reduction valve (8) if the tyre pressure is too high.

Turn off the compressor, the switch (2) should be in position 0. Detach the air hose and unplug the lead. Replace the valves dust cap.

Put the lead (5) and air hose (4) into the side compartment (3).

Put the puncture repair kit back under the floor in the cargo area.

The compressor should not run for more than ten minutes at a time. Let it cool afterwards as there is a risk of overheating.

NOTE! The canister with sealant and hose should be replaced after use.

WARNING! Never stand next to the tyre when the compressor is running. Be particularly observant of the tyre walls. If cracks, irregularities or other damage appears, turn off the compressor immediately. Under these circumstances your journey should not continue. Contact an authorised tyre centre.

WARNING! You should not drive faster than 80 km/h after the emergency tyre repair kit has been used. The temporarily sealed tyre must be changed as soon as possible (maximum driving distance: 200 km).

V50 book w446.book Page 148 Thursday, September 9, 2004 10:27 AM

149

Wheels and tyres

Changing the sealing fluid canister The canister of sealing fluid should be changed before the best-before date has expired, see date label (1), or after the tyre has been sealed. After use, the canister (6) with holder (8) and air hose (10) should be changed.

The canister can be replaced by an autho- rised Volvo workshop or according to the instructions.

Changing the canister before the best-before date has expired Undo the two screws (2) on the orange-

coloured case (3). Remove the speed label (4) and date

label (1), and open the safety catch (5). Loosen the case (3) and take it off.

Unscrew and remove the canister (6).

Check that the seal (7) on the new canister is not damaged. Screw the canister into place.

Refit the case (3). Check that the case is correctly fitted. Screw it on with the screws (2).

Affix the speed label (4) and new date label (1) to the tyre repair kit.

Treat the removed canister as hazardous waste.

Changing the canister and hose after use Undo the two screws (2) on the orange-

coloured case (3). Important! Read the safety instructions on the bottom of the canister.

WARNING! Ensure the compressor is not connected to the 12 V socket when the canister is changed.

V50 book w446.book Page 149 Thursday, September 9, 2004 10:27 AM

150

Wheels and tyres

Emergency puncture repair

Remove the speed label (4) and date label (1), and open the safety catch (5). Loosen the case (3) and take it off.

Push down the button (8) while turning the canister (6) and the holder (9) clockwise. Remove them.

Pull out the air hose (10). Wipe off remaining sealing fluid with a rag

or scrape it away if it is has already dried. Fit a new air hose (10). Check that it is

fitted correctly. Check that the seal (7) on the new canister is not damaged. Screw the holder (9) onto the canister (6) and turn it anticlockwise until a click is heard.

Refit the case (3). Check that the case is correctly fitted. Screw it on with the screws (2).

Affix the speed label (4) and new date label (1) to the tyre repair kit.

The empty canister and air hose can be treated as normal waste.

V50 book w446.book Page 150 Thursday, September 9, 2004 10:27 AM

151

Car care Cleaning 152 Touching up paintwork 154 Rustproofing 155

V50 book w446.book Page 151 Thursday, September 9, 2004 10:27 AM

152

Car care

Cleaning

Washing the car Wash the car as soon as it becomes dirty. Use car shampoo. Dirt and road salt can lead to corrosion.

Do not park the car in direct sunshine. Washing a car with hot paintwork can cause permanent paintwork damage. Wash the car in a carwash with waste water separator.

Thoroughly rinse dirt off the underbody of the car.

Rinse the entire car to remove loose dirt. When using a pressure washer: Make sure that the nozzle of the pressure washer is not closer than 30 cm to the bodywork. Do not spray directly at the locks.

Wash using a sponge, car shampoo and plenty of lukewarm water.

If the dirt is difficult to dislodge, wash the car using a cold degreasing agent.

Dry the car using a clean, soft chamois or a water scraper.

Clean the wiper blades with a lukewarm soap solution or car shampoo.

Removing bird droppings Wash bird droppings off the paintwork as soon as possible. Bird droppings contain chemicals that affect and discolour paintwork

very quickly. This discoloration can only be removed by a specialist.

Automatic carwashes Although an automatic carwash is a quick and easy way to clean the car, it is no substitute for a proper hand wash. The brushes of an automatic carwash cannot reach all parts. We recommend that new cars are washed by hand for the first few months.

Press the brake pedal lightly from time to time if driving for long periods in rain or slush. This heats and dries the brake pads. You should also do this when you begin driving in extremely damp or cold weather.

Cleaning the upholstery Treating spots on fabric A special cleaning agent, available from your Volvo dealer, is recommended for cleaning the fabric upholstery. Other chemicals can impair the fire retardant qualities of the uphol- stery.

Treating spots on vinyl and plastic parts A special cleaning agent, available from your Volvo dealer, is recommended for cleaning interior vinyl and plastic parts. Do not scrape or rub spots. Do not use strong stain removers.

Treating spots on leather A special cleaning agent, available from your Volvo dealer, is recommended when cleaning leather upholstery. Treat the leather uphol- stery once or twice a year using Volvos leather care kit. Never use strong solvents. Such products may damage fabric, vinyl and leather upholstery.

WARNING! Always have the engine cleaned by a workshop. There is a risk of fire if the engine is hot.

WARNING! Always test the brakes after washing the car to ensure that moisture and corrosion do not attack the brake pads and reduce braking performance.

Important! Sharp objects and Velcro may damage the fabric upholstery.

V50 book w446.book Page 152 Thursday, September 9, 2004 10:27 AM

153

Car care

Cleaning seatbelts Use water and a synthetic detergent. A special textile cleaning agent is available from you Volvo dealer. Make sure the seatbelt is dry before allowing it to retract.

Polishing and waxing Polish and wax the car if the paintwork is dull or to give the paintwork extra protection.

The car does not need to be polished until it is at least one year old. However, the car can be waxed during this time. Do not polish or wax the car in direct sunlight.

Wash and dry the car thoroughly before you begin polishing or waxing. Clean off asphalt and tar stains using Volvo tar remover or white spirit. More stubborn marks can be removed using fine rubbing paste designed for car paintwork.

Polish first with a polish and then wax with liquid or solid wax. Follow the instructions on the packaging carefully. Many preparations contain both polish and wax.

V50 book w446.book Page 153 Thursday, September 9, 2004 10:27 AM

154

Car care

Touching up paintwork

Paintwork Paint is an important part of the cars rustproofing and should therefore be checked regularly. To avoid the onset of rust, damaged paintwork must be rectified immediately. The most common types of paintwork damage are stone chips, scratches, and marks on the edges of wings and doors.

Colour code It is important that the correct colour is used. The cars colour code is shown on the product decal on the B-pillar. See page 210.

Stone chips and scratches Before touching up paintwork, the car must be clean and dry and at a temperature above 15 C.

Materials Primer in a can Paint in a can or touch-up pen Brush Masking tape Minor stone chips and scratches If the stone chip has not penetrated to the bare metal and there is an undamaged colour coat, you can paint straight after cleaning the damaged area.

If the stone chip has penetrated to the bare metal Stick a piece of masking tape over the

damaged surface. Then remove the tape to remove any loose paint.

Stir the primer well and apply using a fine brush or matchstick. Apply paint using a brush once the primer is dry.

For scratches, proceed as above, but mask around the damaged area to protect the undamaged paintwork.

After a few days, polish the touched-up areas. Use a soft rag and a small amount of lapping paste.

V50 book w446.book Page 154 Thursday, September 9, 2004 10:27 AM

155

Car care

Rustproofing

Inspection and maintenance Your car received a thorough and complete rustproofing at the factory. Parts of the body are made of galvanised sheet metal. The underbody is protected by a wear-resistant anti-corrosion compound. And, a thin, penetrating rustproofing fluid was sprayed into the members, cavities and closed sections.

Maintain the cars rustproofing.

Keep the car clean. Hose down the underbody. If using a pressure washer, keep the nozzle at least 30 cm from the painted surfaces.

Regularly check and touch-up the rustproofing treatment as necessary.

The cars rustproofing does not normally require treatment for approximately 12 years. After that time, it should be treated at three- year intervals. If the car needs further treatment, please contact an authorised Volvo workshop.

V50 book w446.book Page 155 Thursday, September 9, 2004 10:27 AM

156

Car care

V50 book w446.book Page 156 Thursday, September 9, 2004 10:27 AM

157

Maintenance and service Volvo service 158 Self-maintenance 159 Bonnet and engine compartment 160 Diesel 161 Oils and fluids 162 Wiper blades 166 Battery 167 Bulbs 169 Replacing bulbs 170 Fuses 175

V50 book w446.book Page 157 Thursday, September 9, 2004 10:27 AM

158

Maintenance and service

Volvo service

Volvo service programme Before the car left the factory, it was thoroughly test driven. It was checked again in accordance with Volvo Car Corporation regulations before it was handed over to you.

To keep your Volvo as safe and reliable as possible, follow the Volvo service programme specified in the Service and Warranty Booklet. Have an authorised Volvo workshop carry out service and maintenance work. Volvo workshops have the personnel, special tools and service literature to guarantee the highest quality of service.

Special service measures Certain service measures, which affect the cars electrical system, can only be performed using electronic equipment specially developed for your car. Always contact an authorised Volvo workshop before beginning or performing service work that affects the electrical system.

Installing accessories The incorrect connection and installation of accessories can negatively affect the cars electrical system. Certain accessories only function when the appropriate software has been programmed into the cars electrical system. Always contact an authorised Volvo workshop before installing accessories which are connected to or affect the electrical system.

Recording vehicle data One or more of the computers in your Volvo are capable of recording detailed information. This information is intended for use in research to enhance safety and for diagnosing faults in some of the in-car systems. The data may include details regarding seatbelt use by the driver and passengers, the functions of various vehicle systems and modules, and status information about the engine, throttle, steering, brakes and other systems. This data can also include details of the way the car is driven. This type of information can include, without being limited to, specific details such as vehicle speed, the use of the brake and accelerator pedals and steering wheel position. This latter type of data can be stored for a limited period while the car is being driven and subse- quently during a collision or a near-collision.

Volvo Car Corporation will not disclose the stored information without consent. However, Volvo Car Corporation may be forced to disclose the information due to national legis- lation. Volvo Car Corporation and its workshops may also read and use the infor- mation.

Adverse driving conditions Change the engine oil and replace the air and oil filters more often than recommended in the Service and Warranty Booklet when driving in adverse conditions.

Adverse driving conditions include extended periods of driving:

in a dusty or sandy environment. towing a caravan or trailer. in mountainous regions. at high speeds. at low speeds or idling. short journeys (less than 10 km) at low

temperatures (below 5 C).

Important! For the Volvo warranty to apply, check and follow the instructions in the Service and Warranty Booklet.

V50 book w446.book Page 158 Thursday, September 9, 2004 10:27 AM

159

Maintenance and service

Self-maintenance

Before starting work on the car Battery Check that the battery cables are correctly connected and tightened.

Never disconnect the battery when the engine is running (e.g. if replacing the battery).

Never use a quick charger to charge the battery. The battery cables must be discon- nected when charging the battery.

The battery contains acid that is both corrosive and toxic. Handle the battery in an environmentally-suitable way. Let your Volvo dealer assist you.

Check regularly Check the following at regular intervals, for example, when refuelling:

Coolant The level must be between the MIN and MAX marks on the expansion tank.

Engine oil The level must be between the MIN and MAX marks.

Power steering fluid The level must be between the MIN and MAX marks.

Washer fluid The reservoir should be well filled. Use washer antifreeze at temperatures around freezing.

Brake and clutch fluid The level must be between the MIN and MAX marks.

WARNING! High voltage output from the ignition system. The voltage in the ignition system is dangerous. The ignition must therefore always be switched off for work in the engine compartment. Do not touch the spark plugs or ignition coils when the ignition is on or the engine is hot.

WARNING! Bear in mind that the radiator fan may start automatically some time after the engine has been switched off. Always have the engine cleaned by a workshop. There is a risk of fire if the engine is hot.

V50 book w446.book Page 159 Thursday, September 9, 2004 10:27 AM

160

Maintenance and service

Bonnet and engine compartment

Opening the bonnet To open the bonnet:

Pull the handle on the far left under the dashboard. You will hear when the catch releases.

Insert your hand under the centre of the front edge of the bonnet and press the safety catch to the right.

Open the bonnet.

Engine compartment 1. Washer fluid reservoir (4 cyl.) 2. Coolant expansion tank 3. Power steering fluid reservoir

4. Engine oil dipstick1

5. Radiator 6. Radiator fan 7. Washer fluid reservoir (5 cyl.) 8. Brake and clutch fluid reservoir

(right-hand drive)

9. Filler orifice for engine oil1

10. Brake and clutch fluid reservoir (left-hand drive)

11. Battery

12. Relay and fuse box

13. Air filter1

WARNING! Check that the bonnet locks properly when closed.

1. Dependent on engine variant.

V50 book w446.book Page 160 Thursday, September 9, 2004 10:27 AM

161

Maintenance and service

Diesel

Fuel system Diesel engines are sensitive to contaminants. Only use diesel from a well-known oil company. Never fill up with diesel if the quality is dubious. The large oil companies also produce a special winter-grade diesel for temperatures around freezing. This fuel is less viscous at low temperatures and reduces the risk of wax forming in the fuel system.

The risk of condensation in the fuel tank is reduced if the tank is kept well filled. When refuelling, check that the area around the fuel filler pipe is clean. Avoid spilling fuel onto the paintwork. Wash off any spillage with detergent and water.

Empty tank No special procedures are required if the tank runs dry.

RME (Rape methyl ester) A maximum of 5% RME may be mixed with the diesel.

Draining condensation from the fuel filter The fuel filter separates condensation from the fuel. Condensation can disrupt engine operation.

The fuel filter must be drained at the intervals specified in the Service and Warranty Booklet or if you suspect that the car has been filled with contaminated fuel.Important!

There is a risk of engine damage if the RME concentration is greater than 5%.

V50 book w446.book Page 161 Thursday, September 9, 2004 10:27 AM

162

Maintenance and service

Oils and fluids

Dipstick, petrol engines

Checking and changing the engine oil and oil filter The Service and Warranty Booklet specifies suitable intervals for changing the oil and oil filter. Shorter intervals are recommended if driving in adverse conditions. See page 158.

Check the level of engine oil and change the oil regularly.

Dipstick, diesel engine The oil level in a new car must be checked during the period preceding the first regular oil change. The Service and Warranty Booklet specifies the odometer readings for oil changes. Volvo recommends checking the oil level every 2500 km. The most accurate measurements are made on a cold engine before starting. The measurement will be inaccurate if taken immediately after the engine is switched off. The dipstick will indicate that the level is too low because the oil has not had time to flow down into the oil sump.

NOTE! See the recommended oil grade, viscosity and capacities on page 214.

The oil level must be within the area marked on the dipstick

Important! Always use oil of the recommended grade and correct viscosity. Never use oil additives. These can damage the engine. If the system is topped up with a different oil, contact the nearest authorised Volvo workshop for servicing.

V50 book w446.book Page 162 Thursday, September 9, 2004 10:27 AM

163

Maintenance and service

Checking the oil in a cold engine: Wipe the dipstick clean before checking

the level. Check the oil level using the dipstick. The

oil level must be between the MIN and MAX marks.

If the level is close to the MIN mark, start by topping up with 0.5 litres of oil. Top up until the oil level is nearer the MAX than the MIN mark on the dipstick. See page 214 for capacities.

Checking the oil in a warm engine: Park the car on a level surface, switch off

the engine and wait 10-15 minutes to allow the oil time to run back to the sump.

Wipe the dipstick clean before checking the level.

Check the oil level using the dipstick. The oil level must be between the MIN and MAX marks.

If the level is close to the MIN mark, start by topping up with 0.5 litres of oil. Top up until the oil level is nearer the MAX than

the MIN mark on the dipstick. See page 214 for capacities.

Location of washer fluid reservoir1

Washer fluid, topping up The windscreen and headlamp washers share a common reservoir.

1. Filler cap on 4 cylinder engines and diesel.

2. Filler cap on 5 cylinder engines. Add washer antifreeze during the winter so that the fluid does not freeze in the pump, reservoir and hoses. See the capacities on page 215.

NOTE! Mix the washer antifreeze and water before filling the reservoir.

Important! Never fill above the MAX mark. Oil consumption may increase if too much oil is poured into the engine.

WARNING! Do not spill oil onto the hot exhaust manifold due to the risk of fire.

1. Dependent on engine variant.

V50 book w446.book Page 163 Thursday, September 9, 2004 10:27 AM

164

Maintenance and service

Oils and fluids

Checking and topping up the coolant When topping up the coolant, follow the instructions on the packaging. It is important that the mixture of coolant concentrate and water is correct for the prevailing weather conditions. Never top up with water only. The risk of freezing increases with both too little and too much coolant concentrate.

See the capacities on page 215.

Check the coolant regularly The level should lie between the MIN and MAX marks on the expansion tank. If the system is not filled sufficiently, high local temperatures could occur, causing a risk of damage (cracks) to the cylinder head. Top up the coolant when the level falls to the MIN mark.

NOTE! The engine must only be run with a well-filled cooling system. High temperatures can occur, causing a risk of damage (cracks) to the cylinder head.

Checking and topping up the brake and clutch fluid The brake and clutch fluid have a common reservoir1. The fluid level must be between the MIN and MAX marks. Check the level regularly. Change the brake fluid every other year or at every other regular service.

See the capacities and recommended fluid grade on page page 215.

The fluid should be changed annually on cars driven in conditions requiring hard, frequent

Important! Always use coolant with anti-corrosion agent as recommended by Volvo. New cars are filled with coolant that can withstand temperatures down to approximately -35 C.

WARNING! The coolant may be very hot. If the coolant requires topping up when the engine is at operating temperature, unscrew the expansion tank cap slowly to gently release the overpressure.

1. Location dependent on whether car is left or right-hand drive.

V50 book w446.book Page 164 Thursday, September 9, 2004 10:27 AM

165

Maintenance and service

braking, such as driving in mountains or tropical climates with high humidity.

Checking and topping up the power steering fluid Check the level at every service. The fluid does not require changing. The fluid level must be between the MIN and MAX marks.

See the capacities and recommended oil grade on page 215.

If a fault should arise in the power steering system or if the car is without power and must be towed, it can still be steered. However the steering will be much heavier than normal and it will require more effort to turn the wheel.

WARNING! If the brake fluid is under the MIN level in the brake fluid reservoir, do not drive further before topping up the brake fluid. The reason for the loss of brake fluid must be investigated.

V50 book w446.book Page 165 Thursday, September 9, 2004 10:27 AM

166

Maintenance and service

Wiper blades

Changing the wiper blades Lift up the wiper arm and position the

wiper blade at 90 degrees to the wiper arm.

Pull the wiper blade off the shaft, straight out to the side.

Fit the new wiper blade (1), at 90 degrees to the wiper arm.

Position the wiper blade (2) under the curved metal plate (3) and lower the wiper arm.

NOTE! The wiper blades are different lengths. The blade on the drivers side is longer than the blade on the passenger side.

Changing the rear window wiper blade Fold out the wiper arm. Detach the wiper blade by pulling it

towards the rear window. Press home the new wiper blade. Check

that it is securely fitted. Lower the wiper arm.

V50 book w446.book Page 166 Thursday, September 9, 2004 10:27 AM

167

Maintenance and service

Battery

Battery care The service life and function of the battery is influenced by factors such as the number of starts, discharging, driving style, driving conditions and climatic conditions.

For the battery to function satisfactorily, consider the following:

Regularly check that the battery electrolyte level is correct (A).

Check all cells. Use a screwdriver to remove the caps. Each cell has its own maximum level mark.

If necessary, top up with distilled water to the batterys maximum mark.

NOTE! Never fill above the maximum mark (A).

Tighten the caps properly. NOTE! The life of the battery is shortened if it becomes discharged repeatedly.

Symbols on the battery These symbols displayed on the battery.

Use protective goggles

Further information in the owners manual.

Store the battery out of the reach of children.

The battery contains corrosive acid.

Avoid sparks and naked flames.

Risk of explosion.

Important! Always use distilled or deionised water (battery water).

V50 book w446.book Page 167 Thursday, September 9, 2004 10:27 AM

168

Maintenance and service

Battery

Changing the battery Removing the battery: Switch off the ignition and remove the key. Unscrew the cover over the battery. Wait at least 5 minutes before touching

any electrical terminals. This allows time for the information in the cars electrical system to be stored in the control modules.

Remove the lid and unscrew the front wall of the battery box using a screwdriver.

Disconnect the negative battery lead. Release the clamp securing the battery. Disconnect the positive battery lead. Remove the battery. Fitting the battery: Fit the battery into position. Connect the positive lead. Fit the clamp securing the battery. Connect the negative lead. Refit the front wall of the battery box and

the lid. Refit the cover over the battery.

WARNING! Batteries can generate oxyhydrogen gas, which is highly explosive. A spark, which can be generated if you connect the jump leads incorrectly, is sufficient to make the battery explode. The battery also contains sulphuric acid, which can cause serious burns. If the acid comes into contact with eyes, skin or clothing, flush with large quantities of water. If acid splashes into the eyes, seek medical advice immediately.

V50 book w446.book Page 168 Thursday, September 9, 2004 10:27 AM

169

Maintenance and service

Bulbs

General All bulb specifications are given on page 221.

The following list contains bulbs and point- source lamps that are specialised or unsui- table for changing except at a workshop:

General interior lighting in the roof. Reading lamps. Glovebox lighting. Direction indicators in the door mirrors. Approach lighting in the door mirrors. High-level brake light.

Changing front bulbs All front bulbs (except for fog lamps) are changed by first removing the lamp housing from the engine compartment.

Removing the lamp housing: Remove the ignition key and turn the light

switch to position 0. Withdraw the lamp housings locking

pin (1). Pull the lamp housing to the side and then

forward (2). Unplug the connector. Lift out the lamp housing and place it on a

soft surface to avoid scratching the lens. Fitting the lamp housing: Plug in the connector. Refit the lamp housing and fit the locking

pin. Check that the pin is correctly inserted.

Check the lighting. The lamp housing must be plugged in and secured in place before the lighting is turned on or the ignition key inserted into the ignition switch.

Important! Never touch the bulbs glass with your fingers. Grease and oils from your fingers are vaporised by the heat, coating and damaging the reflector.

WARNING! On cars with Bi-Xenon headlamps, all work on the lights should be carried out at an authorised Volvo workshop. Bi-Xenon headlamps must be handled with extreme care due to the high-voltage unit.

V50 book w446.book Page 169 Thursday, September 9, 2004 10:27 AM

170

Maintenance and service

Replacing bulbs

Dipped beam Removing the cover and bulb:

Remove the entire lamp housing. Bend aside the catches and remove the

cover. Unplug the connector from the bulb. Release the spring clip that secures the

bulb. First, press it to the left to release it, then out and down.

Pull out the bulb. Refit the lamp housing.

Fitting a new bulb:

Fit the new bulb. It can only be fitted in one position.

Press the spring clip up and then slightly to the right so that it clicks into place.

Press the connector back on. Refit the plastic cover. Refit the lamp housing.

Main beam Remove the entire lamp housing. Left-hand headlamp:

Turn the bulb holder anticlockwise. Right-hand headlamp: Turn the bulb holder clockwise.

Withdraw the bulb holder and change the bulb.

Refit the bulb holder. It can only be fitted in one way.

Refit the lamp housing.

V50 book w446.book Page 170 Thursday, September 9, 2004 10:27 AM

171

Maintenance and service

Position/parking lamps Pull out the bulb holder with a pair of

pliers. Do not pull out the bulb holder by pulling the electrical cable.

Replace the bulb. Press the bulb holder back into place. It

can only be fitted in one way.

Direction indicators Twist the bulb holder anticlockwise and

remove it. To remove the bulb from the bulb holder,

press the bulb in and turn it anticlockwise. Fit a new bulb and refit the bulb holder

into the lamp housing.

Side marker lamps Twist the bulb holder anticlockwise and

withdraw it. Change the bulb. Refit the bulb holder. It can only be fitted

in one way.

V50 book w446.book Page 171 Thursday, September 9, 2004 10:27 AM

172

Maintenance and service

Replacing bulbs

Fog lamps Switch off all lights and turn the ignition

key to position 0. Remove the panel from around the lamp

housing. Remove the two Torx screws securing the

lamp housing and take out the lamp housing.

Unplug the connector from the bulb. Turn the bulb anticlockwise and pull it out. Fit the new bulb and turn it clockwise. Plug in the connector to the bulb. Secure the lamp housing with the screws

and press the panel back into place.

Removing the bulb holder All bulbs in the rear lamp cluster can be changed from inside the cargo area.

Switch off all lights and turn the ignition key to position 0.

Remove the covers from the left/right panel to access the bulbs.

These bulbs are located in separate bulb holders.

Unplug the connector from the bulb holder.

Squeeze together the catches and remove the bulb holder.

Replace the bulb. Plug in the connector.

Press the bulb holder back into place and refit the cover.

V50 book w446.book Page 172 Thursday, September 9, 2004 10:27 AM

173

Maintenance and service

Bulb holder

Location of the bulbs in the rear light cluster 1. Brake light 2. Position/parking lamps 3. Direction indicator 4. Rear fog lamp (one side) 5. Reversing lamp NOTE! If the error message "BULB FAILURE"/"CHECK STOP LAMP" remains after a faulty lamp has been replaced then an authorised Volvo workshop needs to be consulted to rectify the fault.

Number plate lighting Switch off all lights and turn the ignition

key to position 0. Remove the screw with a screwdriver. Carefully detach the entire lamp housing

and withdraw it. Turn the connector antic- lockwise and pull out the bulb.

Replace the bulb. Insert the connector and turn clockwise. Refit the entire lamp housing and screw it

into place.

Courtesy lighting There is courtesy lighting under the dashboard on the driver and passenger sides.

Insert a screwdriver and gently turn so that the lens detaches.

Remove the blown bulb. Fit a new bulb. Refit the lens.

V50 book w446.book Page 173 Thursday, September 9, 2004 10:27 AM

174

Maintenance and service

Replacing bulbs

Cargo area Insert a screwdriver and gently turn so

that the lamp housing comes loose. Remove the blown bulb. Fit a new bulb.

Vanity mirror lighting Removing the mirror glass:

Insert a screwdriver underneath the lower edge, in the centre. Carefully prise up the lug on the edge.

Insert the screwdriver underneath the edge on the left and right-hand sides (by the black rubber sections). Carefully prise free the lower edge of the glass.

Carefully detach and lift aside the entire mirror glass and cover.

Remove the blown bulb and replace it with a new one.

Fitting the mirror glass:

First, press the three lugs at top edge of mirror glass back into position.

Then press the three lower lugs back into position.

V50 book w446.book Page 174 Thursday, September 9, 2004 10:27 AM

175

Maintenance and service

Fuses

All electrical functions and components are fused to protect the cars electrical system from damage by short circuiting and overloading.

The fuses are in two different locations in the car:

Relay/Fuse box in the engine compartment. Relay/fuse box in the passenger compartment.

Changing If an electrical component or function does not work, it may be because the components fuse was temporarily overloaded and blew.

Look in the fuse diagram to locate the fuse. Pull out the fuse and check from the side to see whether the

curved wire has blown. If this is the case, replace it with a new fuse of the same colour and

amperage. Each fuse box has space for several spare fuses. If the same fuse blows repeatedly it means that there is a fault in the component. Contact an authorised Volvo workshop to have the system checked.

Relay/fuse box in the engine compartment The fuse box has 36 fuse positions. Be sure to replace a blown fuse with a new fuse of the same colour and amperage.

1936 are of the "Mini Fuse" type. Fuses 718 are of the "JCASE" type and should be replaced by

an authorised Volvo workshop. Fuses 16 are of the "Midi Fuse" type and may only be replaced

by an authorised Volvo workshop. On the inside of the cover are tweezers to assist removing and fitting fuses.

V50 book w446.book Page 175 Thursday, September 9, 2004 10:27 AM

176

Maintenance and service

Fuses

1. Radiator fan................................................................................... 50 A 2. Power steering.............................................................................. 80 A 3. Supply to passenger compartment fuse box......................... 60 A 4. Supply to passenger compartment fuse box......................... 60 A 5. Heating and ventilation unit,

Additional heater relay coil (PTC) (only 4 cyl. petrol) .......... 80 A 6. Glow plugs (diesel) ..................................................................... 60 A 7. ABS pump..................................................................................... 30 A 8. ABS valves .................................................................................... 20 A 9. Engine control module (ECM) .................................................. 30 A 10. Ventilation fan................................................................................ 40 A 11. Headlamp washers...................................................................... 20 A 12. Supply to heated rear window.................................................. 30 A 13. Starter motor relay ....................................................................... 30 A 14. Trailer wiring .................................................................................. 40 A 15. Reserve .................................................................................................. -

16. Supply to infotainment system ................................................. 30 A 17. Windscreen wipers ..................................................................... 30 A 18. Supply to passenger compartment fuse box ........................ 40 A 19. Reserve .................................................................................................. - 20. Horn ................................................................................................ 15 A 21. Fuel-driven additional heater, passenger

compartment heater .................................................................... 20 A 22. SUBWOOFER ............................................................................ 15 A 23. Engine control module (ECM)/

Transmission control module (TCM) ....................................... 10 A 24. Diesel filter heater........................................................................ 20 A 25. Reserve .................................................................................................. - 26. Ignition switch............................................................................... 15 A 27. A/C compressor........................................................................... 10 A 28. Climate control module (CCM)

Multimedia module (MMM) ....................................................... 10 A

V50 book w446.book Page 176 Thursday, September 9, 2004 10:27 AM

177

Maintenance and service

29. Fog lamp, front.............................................................................. 15 A 30. Engine control module (ECM) .....................................................3 A 31. Alternator voltage regulator ....................................................... 10 A 32. Injectors (5 cyl), oxygen sensor (4 cyl)

intercooler (diesel), air preheater valve (diesel) .................... 10 A 33. Oxygen sensor heater element (5 cyl.),

vacuum pump (5 cyl)................................................................... 20 A 34. Ignition coils, injectors (1.6 petrol)

fuel pump (diesel) pressure switch, climate control (5 cyl) .................................. 10 A

35. Engine sensor valves, A/C relay oil trap PTC element, injectors (1.8 petrol)............................ 15 A

36. Engine control module (ECM), accelerator pedal position sensor ............................................................................. 10 A

V50 book w446.book Page 177 Thursday, September 9, 2004 10:27 AM

178

Maintenance and service

Fuses

Relay/fuse box in the passenger compartment The fuse box has 50 fuse positions. The fuses are located under the glovebox. The box also provides space for several spare fuses.

Changing fuses:

Remove the trim concealing the fuse box by pressing in the pin in the centre of the clips (1) about 1 cm and then withdrawing the clips.

Turn the two wing screws (that secure the fuse box) (2) antic- lockwise and remove them.

Lower the fuse box (3) half way. Pull it towards the seat until it stops. Lower it completely. The fuse box can be unhooked.

Close the fuse box in the reverse order. Remove the pins from the centre of the clips. Fit the trim and the

clips. Reinsert the pins to expand the clips and secure the trim.

V50 book w446.book Page 178 Thursday, September 9, 2004 10:27 AM

179

Maintenance and service

37. Reserve .................................................................................................. - 38. Reserve .................................................................................................. - 39. Reserve .................................................................................................. - 40. Reserve .................................................................................................. - 41. Reserve .................................................................................................. - 42. Reserve .................................................................................................. - 43. Telephone, audio .......................................................................... 15 A 44. SRS system .................................................................................. 10 A 45. Electrical socket, rear seat......................................................... 15 A 46. Passenger compartment, glovebox and courtesy lighting.....5 A 47. Sunroof relay coil, door mirrors....................................................5 A 48. Washer ........................................................................................... 15 A 49. SRS system .................................................................................. 10 A 50. Reserve .................................................................................................. -

51. Auxiliary heater relay coil (PTC), front lights parking assistance....................................................................... 10 A

52. ABS system.....................................................................................5 A 53. Power steering ............................................................................. 10 A 54. Transmission control module (TCM),

differential gear (DEM) ............................................................... 10 A 55. Remote control module, Keyless control module................. 20 A 56. Battery charging control module.............................................. 10 A 57. Computer system, brake light switch...................................... 15 A 58. Main beam (right), extra lights relay coil ................................ 7.5 A 59. Main beam, left ............................................................................ 7.5 A 60. Seat heating (drivers side) ....................................................... 15 A 61. Seat heating (passenger side) ................................................. 15 A 62. Sunroof .......................................................................................... 20 A 63. Supply to rear right door............................................................ 20 A 64. Audio .................................................................................................5 A

V50 book w446.book Page 179 Thursday, September 9, 2004 10:27 AM

180

Maintenance and service

Fuses

65. Infotainment system .......................................................................5 A 66. Infotainment control module (ICM), infotainment

relay coil ......................................................................................... 10 A 67. Reserve .................................................................................................. - 68. Cruise control ..................................................................................5 A 69. Climate control, rain sensor..........................................................5 A 70. Reserve .................................................................................................. - 71. Reserve .................................................................................................. - 72. Reserve .................................................................................................. - 73. Sunroof, overhead console (OHC)

rear seatbelt reminder....................................................................5 A 74. Fuel pump relay ............................................................................ 15 A 75. Reserve .................................................................................................. - 76. Reserve .................................................................................................. - 77. Electrical socket in cargo area, accessory

electronic module (AEM) ........................................................... 15 A 78. Reserve .................................................................................................. - 79. Reversing lamp................................................................................5 A 80. Reserve .................................................................................................. - 81. Supply to rear left door............................................................... 20 A 82. Supply to front right door........................................................... 25 A 83. Supply to front left door ............................................................. 25 A 84. Power passenger seat ................................................................ 25 A 85. Power drivers seat ...................................................................... 25 A 86. Interior lighting relay, power seats ..............................................5 A

V50 book w446.book Page 180 Thursday, September 9, 2004 10:27 AM

181

Infotainment system Audio and telephone 182 Control panel 183 Audio functions 185 Radio functions 187 CD/MD (option) 192 CD changer (option) 194 Menu settings and options Audio 196 Telephone (option) 198 Telephone functions 200 Menu settings and options Telephone 206

V50 book w446.book Page 181 Thursday, September 9, 2004 10:27 AM

182

Infotainment system

Audio and telephone

Audio and telephone system (option) The infotainment system integrates the audio and telephone functions. The infotainment system can be used easily and conveniently using the common control panel and the steering wheel keypad. The control panel display indicates the present function.

The system can be equipped with Dolby Surround Pro Logic II (certain markets). This feature gives more natural sound repro- duction.

There are three levels of audio system:

Performance: AM/FM radio, CD player, 4x20 W, four full range loudspeakers (or four full range speakers and two tweeters on certain markets).

High Performance: AM/FM radio, CD player, 4x40 W, eight loudspeakers (woofer and tweeter in each door).

Premium Sound: AM/FM radio, CD player, 4x70 W + 25 W, Dolby Pro Logic II, 12 loudspeaker (woofer, mid-range and tweeter in the front doors, woofer and tweeter in the rear doors, woofer and tweeter in the centre dashboard speaker).

The exact specifications for these levels may vary between markets. Certain levels are not offered on all markets. The options list (sub- woofer, CD/MD player, CD changer, telephone, navigation, etc.) differs between markets. Not all options are available for all levels.

This owners manual describes one way of operating the audio and telephone system. If your car has a keypad in the steering wheel, this can also be used.

V50 book w446.book Page 182 Thursday, September 9, 2004 10:27 AM

183

Infotainment system

Control panel

Control panel on centre console

Control panel on centre console 1. POWER Audio On/Off 2. PHONE Telephone On/Off/Standby 3. VOLUME Volume control 4. CD/MD Switches between CD and

MD (option) 5. AM/FM Switches between FM1, FM2

and AM 6. MENU Opens the main menu 7. ENTER Selects menu options,

activates a selection or wakes the telephone from standby.

8. EXIT Goes back in the menu, cancels a selection, puts the telephone into standby, and erases the preceding character when entering text and numbers.

9. Navigation button scrolls up/down in the menus, scans/changes tracks/ stations, scroll forward/backward when entering text and digits, and switches between discs in the CD changer

10. TUNING Scan/change tracks or station

11. SOUND Audio settings (e.g. bass, treble and fader)

12. SCAN Automatic station search 13. AUTO Finds and stores the strongest

stations

14. Display Displays options, menus and information

15. Slot for inserting/ejecting 16. Eject CD/MD 17. Station preset buttons/CD changer disc

(1-6), number/character buttons for the telephone, and menu presets

Display The display shows the function currently in use, for example menu options, messages, telephone numbers or settings. In daylight the information is displayed against a light background. In darkness it is displayed against a dark background. Clean the display with a soft, dry cloth. Never use cleaning agent.

This display is also used for the climate control system.

Menus Press MENU to access the main menu. The settings for the active audio system source (radio for example) are selected from the main menu. Audio settings cannot be made if the audio system is not switched on.

Using the menu:

Use the navigation button to scroll up and down in the menu.

V50 book w446.book Page 183 Thursday, September 9, 2004 10:27 AM

184

Infotainment system

Control panel

Press EXIT to cancel, decline an option, or go back one step in the menu structure.

Press ENTER to confirm, select or scroll from one submenu to the next submenu.

If the battery voltage is low, a message appears on the display. The energy saving feature switches off certain functions or reduces the load on the battery, such as by lowering the volume of the sound system.

V50 book w446.book Page 184 Thursday, September 9, 2004 10:27 AM

185

Infotainment system

Audio functions

Audio On/Off The ignition switch must at least be in position I. Press the POWER button to switch the audio system on or off. If the audio system is active when the ignition is switched off, it will reactivate automatically when the car is restarted.

Selecting the sound source Select the sound source with the CD/MD and AM/FM buttons.

Press the AM/FM button repeatedly to scroll between FM1, FM2 and AM.

The selected sound source is shown on the display.

Volume control Turn the volume knob clockwise or antic- lockwise to raise or lower the volume. The volume can also be controlled using the steering wheel keypad.

The car has a speed-dependent volume feature known as active sound control ASC. This adjusts the volume automatically depending on the speed of the car.

Pause mode When the volume is turned to zero, the CD/MD player switches to pause mode. Reactivate the player by turning up the volume.

Volume control for TP, PTY, news and alarms If a CD is playing when the radio receives a traffic announcement, the CD player enters pause mode. The announcement is played at the volume selected for that type of message. The system then returns to the volume selected for the CD player. If the volume is adjusted while the announcement is broadcast, this new volume is saved and used for the next bulletin.

Audio settings Press SOUND. Press the SOUND button repeatedly until

you reach the function you wish to set.

Choose between BASS, TREBLE, FADER, BALANCE, SUBWOOFER (option), CENTRE, and SURROUND.

Use the TUNING knob to set the level. The display shows a max-min scale. The middle indicates the normal position.

The level for the centre speaker can only be set if Dolby Pro Logic II (DPL II ) or 3 channel (3CH) has been selected from the menu. The subwoofer level can only be set if the subwoofer is activated.

Audio settings Shown on the

display

Bass BASS Treble TREBLE Balance between the front and rear speakers

FADER

Balance between the left and right- hand speakers

BALANCE

Level for subwoofer

SUBWOOFER (option)

Level for centre loudspeaker (certain models)

CENTRE

Level for surround sound (certain models)

SURROUND

V50 book w446.book Page 185 Thursday, September 9, 2004 10:27 AM

186

Infotainment system

Audio functions

Dolby Surround Pro Logic II (certain models) Dolby Surround Pro Logic II, with its centre loudspeaker in the dashboard, provides more realistic sound reproduction.

The normal left and right stereo channels are divided into left-centre-right. In addition, ambient surround sound is produced through the rear loudspeaker channels.

Dolby Surround Pro Logic II works in CD and MD modes. 3 channel is recommended for AM and FM radio broadcasts. Dolby Surround Pro Logic II is only available for the highest audio level, Premium Sound.

Setting the surround sound:

Press MENU. Select the menu for the sound source and

press ENTER. Select AUDIO SETTINGS and press

ENTER. Select SURROUND AM/FM or

SURROUND CD/MD and press ENTER. Select Dolby Pro Logic II, 3 channel or

Off and press ENTER. The symbol for Dolby Pro Logic II is shown on the display if this has been selected. 3 channel is shown on the display if this has been selected. Off means the system is in normal stereo mode.

Dolby Surround Pro Logic II and the Dolby icon are trade- marks of Dolby Laboratories Licensing Corporation. The Dolby Pro Logic II Surround

System is manufactured under license from Dolby Laboratories Licensing Corporation.

Subwoofer (option) Gives the system a fuller sound and deeper bass:

Press MENU. Select the menu for the sound source and

press ENTER. Select SUBWOOFER and press ENTER.

A check in the box (on the display) indicates that the subwoofer is activated.

Equalizer, front/rear (certain models) Fine adjustment of the sound from the front speakers:

Press MENU. Select the menu for the sound source and

press ENTER. Select AUDIO SETTINGS and press

ENTER. Select Equalizer front (rear) and press

ENTER.

Use the navigation button or TUNING knob to set the level.

Use the navigation button to select the next frequency. Five frequencies can be adjusted.

Press ENTER to save any changes and exit.

Press EXIT to exit without saving any changes.

V50 book w446.book Page 186 Thursday, September 9, 2004 10:27 AM

187

Infotainment system

Radio functions

Tuning Select radio mode AM, FM1 or FM2

using the AM/FM button. Press the left or right arrow on the

navigation button to search for the next strong station.

Press one of the arrows again to initiate a new search.

Manual tuning There are two ways to tune into a station manually.

Turn the TUNING knob to set the desired frequency.

Press and hold the left or right arrow on the navigation button. The frequency rolls

slowly in the selected direction and increases speed after a few seconds. Release the button when the desired frequency appears on the display.

If the frequency needs adjusting, touch one of the arrows.

Storing stations To store stations on the preset buttons 0-9:

Set the desired station. Press and hold the button you wish to

store the station on. The sound will be muted for a couple of seconds and Station stored appear on the display.

You can store up to 10 stations each for AM, FM1 and FM2, i.e. a total of 30 stations.

Autostoring stations Automatically tune and store up to ten AM or FM stations in a separate memory. If more than ten stations are found, the ten strongest are selected. This function is particularly useful if you are in an area in which you are unfamiliar with the radio stations and their frequencies.

Select radio mode with the AM/FM button.

Start the search by pressing and holding AUTO (more than 2 seconds).

Autostoring appears on the display and a number of strong stations (max. 10) from the selected frequency band are stored in the autostore memory. It there are no stations that are sufficiently strong, No station found appears on the display.

The stations are stored on buttons 0-9. When the radio is in autostore mode, Auto is shown on the display. The text disappears when you return to the ordinary radio mode. Return to the ordinary radio mode by pressing the AM/ FM button or EXIT, or by touching (less than 0.7 seconds) AUTO.

Returning to autostore mode:

To access the most recently stored stations, touch AUTO and then select a station with buttons 0-9.

Scanning Scanning for a station:

Select radio mode with the AM/FM button Press SCAN. Scan appears on the

display. Press SCAN or EXIT to quit. This function automatically searches for the next strong AM or FM station signals. When the radio finds a station, scanning pauses for approximately 8 seconds, after which it continues.

V50 book w446.book Page 187 Thursday, September 9, 2004 10:27 AM

188

Infotainment system

Radio functions

Radio Data System RDS RDS is a system that links together specific network transmitters. It is used, for example, to tune the correct frequency of a station irrespective of the transmitter or the active audio source (e.g. CD). The system can also be used for receiving traffic information and for finding broadcasts of a specific type. Radio text is also a component of RDS. A radio station can transmit information about the radio programme currently being broadcast.

NOTE! Some radio stations do not use RDS or only use a limited range of its features.

PI seek (automatic search for transmitter) PI seek appears on the display when reception is poor for the selected station. The radio automatically searches for the strongest transmission for that station. PI seek Exit to cancel is shown on the display until the station is found.

News Messages with a programme code (such as news from RDS stations) will interrupt other sound sources at the volume set for this specific feature. As soon as the news broadcast is finished, the audio system

returns to the previous sound source and volume setting.

Activating News: Select radio mode with the AM/FM

button. Press MENU. Select the menu for the sound source and

press ENTER. Select News and press ENTER. NEWS appears on the display. Press EXIT if you do not wish to listen to a news broadcast. The News function remains active and the radio waits for the next news programme.

Deactivating Select radio mode with the AM/FM

button. Press MENU. Select the menu for the sound source and

press ENTER. Select News and press ENTER.

V50 book w446.book Page 188 Thursday, September 9, 2004 10:27 AM

189

Infotainment system

Interruptions for news from the current station Select the radio with the AM/FM button. Activate the station broadcasting the

news items. Press MENU. Select Advanced audio settings and

press ENTER. Select News station and press ENTER. Select News from current station and

press ENTER. Deactivating Press MENU. Select the menu for the

sound source and press ENTER. Select Advanced radio settings and press

ENTER. Select News and press ENTER. Select News station and press ENTER. Select News from all stations and press

ENTER.

Traffic information TP station Traffic information from RDS stations inter- rupts other sound sources. The message is heard at the volume set for this specific feature. As soon as the message ends, the audio system returns to the previous sound source and volume setting.

Activating traffic information Press MENU.

Select the menu for the sound source. Select TP and press ENTER. TP is shown on the display when the function is activated. If the set station does not broadcast traffic information TP))) appears on the display. Press EXIT if you do not wish to listen to the current traffic announcement. The TP function remains active and the radio waits for the next traffic announcement.

Activating traffic information from a specific station Select radio mode with the AM/FM

button. Activate the station from which traffic

information is to be received. Press MENU. Select the menu for the

sound source and press ENTER. Select Advanced radio settings and press

ENTER. Select TP and press ENTER. Select TP Station and press ENTER. Select TP from current station. Deactivating TP station Press MENU. Select the menu for the

sound source and press ENTER. Select Advanced radio settings and press

ENTER. Select TP and press ENTER. Select TP Station and press ENTER.

Select TP from all stations and press ENTER.

TP search This function allows you to listen to traffic information when travelling between different areas and countries without selecting a station.

Press MENU. Select a sound source. Select Advanced radio settings and press

ENTER. Select TP and press ENTER. Select TP search and press ENTER. Deactivating Select TP search again and press ENTER.

Radio text Some RDS stations broadcast information, such as about programme content and artists. Displaying text information on the display: Press MENU. Select the menu for the

sound source and press ENTER (the current sound source is always highlighted when you access the menu if the audio system is on).

Select Radio text on the menu and press ENTER.

Deactivating Select Radio text again and press ENTER.

V50 book w446.book Page 189 Thursday, September 9, 2004 10:27 AM

190

Infotainment system

Radio functions

Alarm Alarms are transmitted automatically. The function cannot be deactivated. ALARM! is shown on the radio display when an alarm message is broadcast. The function is used to warn motorists of serious accidents or disasters.

Programme type PTY Use the PTY function to select between the various programme types.

Press MENU. Select the menu for the sound source and press ENTER.

Select PTY and press ENTER. Select Show PTY and press ENTER. The

set stations programme PTY will be shown on the display.

NOTE! Not all radio stations have a PTY designation.

Programme type shown on display Current affairs Information Sport Education Drama Cultures Science Varied speech Pop music

Rock music Easy listening Light classic Serious classic Other music Weather & Metro Finance Childrens progs Social affairs Religion Phone In Travel & Touring Leisure & Hobby Jazz music Country music National music Oldies music Folk music Documentary

Searching for a specific programme type Search through the entire frequency band:

Select FM 1 or FM 2 and press MENU. Select the menu for the sound source and

press ENTER. Select PTY and press ENTER. Scroll to Select PTY and press ENTER.

Press ENTER for one or more of the listed programme types. The PTY symbol on the display lights up when the first selection is made and the radio is set to standby for PTY.

Press EXIT to go back. Select Search PTY and press ENTER. If

the radio finds a station with the selected programme type, this is played.

If the radio does not find a station with the selected programme type, it returns to the previous frequency.

PTY mode is then in standby until the selected programme type is broadcast. When this happens, the radio automatically switches to the station broadcasting the selected programme type.

Deactivating Select Clear all PTY. The PTY symbol

disappears from the display and the radio returns to normal mode.

PTY standby To set the radio to PTY standby, perform steps 1-6.

V50 11 Infotainment w446.fm Page 190 Thursday, September 9, 2004 6:22 PM

191

Infotainment system

Automatic frequency updating The AF function is normally activated and ensures that the radio tunes to the strongest available transmitter.

Automatic frequency updating Press MENU. Select the menu for the

sound source and press ENTER. Select Advanced radio settings and press

ENTER. Select AF and press ENTER. Reactivating Select AF and press ENTER.

Regional radio programmes The regional function is normally deactivated. When the function is activated you can continue to listen to a regional broadcasts even if the signal is weak.

Activating regional radio programmes: Press MENU. Select the menu for the

sound source and press ENTER. Select Advanced radio settings and press

ENTER. Select Regional and press ENTER. REG is shown on the display. Deactivating Select REG again and press ENTER.

EON - Local/Distant/Off (Enhanced Other Networks) With EON activated, traffic announcements and news broadcasts interrupt radio programmes.

The function has three levels:

Local - Only interrupts if the signal is strong.

Distant - Interrupts even if the signal is weak.

Off - Deactivated. Activating EON Press MENU. Select the menu for the sound source and

press ENTER. Select Advanced radio settings and press

ENTER. Select EON and press ENTER. Select Local, Distant or Off and press

ENTER.

Resetting RDS functions Resets all radio settings to the original factory settings.

Press MENU. Select the menu for the sound source and press ENTER.

Select Advanced radio settings and press ENTER.

Select Reset all and press ENTER. Press ENTER again to confirm.

V50 book w446.book Page 191 Thursday, September 9, 2004 10:27 AM

192

Infotainment system

CD/MD (option)

Starting the CD/MD player (option) Activate the CD/MD player by pressing the CD/MD button. Insert a disc into the player.

CDs If the quality of the CD does not comply with the requirements of standard EN60908 or if it has been recorded using poor equipment, sound quality may be poor or playback inter- rupted.

Changing tracks Press the left or right arrow on the navigation button to skip to the previous or next track. The track number is shown on the display. You can also use the TUNING knob (or steering wheel keypad).

Fast forward/reverse Press and hold the left or right arrow on the navigation button to search within a track or the whole disc. Searching continues for as long as the button is depressed.

Random This function chooses a CD track in no parti- cular order.

Press MENU. Select the menu for the sound source and press ENTER.

Select Random and press ENTER. RND is shown on the display as long as the function is activated.

Deactivating Select Random again and press ENTER,

or press EXIT.

Scan Scan plays the first ten seconds of each track.

Press SCAN. Press EXIT to play the current track.

Disc text Some CDs have title information. The infor- mation is displayed as text on the display (only applies to the combined CD/MD player).

Activating Disc text Press MENU. Select the menu for the

sound source and press ENTER. Select Disc text and press ENTER. If information is stored on the disc, this is shown on the display.

Deactivating Select Disc text and press ENTER.

Important! Use only standard 12 cm CDs, no mini CDs. Do not use CDs with adhesive disc labels. The heat from the CD player may cause the label to detach from the disc. This could damage the CD player.

V50 book w446.book Page 192 Thursday, September 9, 2004 10:27 AM

193

Infotainment system

Ejecting a CD/MD Press the eject button to eject the disc. For traffic safety reasons, a CD remains ejected for only 12 seconds. The player will then feed the disc back into the player and switch to pause mode (N/A MD). Press CD/MD to reactivate the player.

V50 book w446.book Page 193 Thursday, September 9, 2004 10:27 AM

194

Infotainment system

CD changer (option)

Starting the CD changer The CD changer can hold up to six discs.

Starting the CD changer:

Press the CD button. Select an empty slot using the buttons 1-6

(or up/down navigation button). The display shows which slots are empty.

Insert a CD into the CD changer. Make sure Insert disc is displayed before you insert the disc

CDs If the quality of the CD does not comply with the requirements of standard EN60908 or if it has been recorded using poor equipment, sound quality may be poor or playback interrupted.

Selecting discs Select the disc you wish to play using the buttons 1-6 or by pressing the up or down arrow on the navigation button. The number of the disc and track are shown on the display.

Changing tracks Press the left or right arrow on the navigation button to skip to the previous or next track. The track number is shown on the display. You can also use the TUNING knob (or steering wheel keypad).

Fast forward/reverse Press and hold the left or right arrow on the navigation button to search within a track or the whole disc. Searching continues for as long as the button is depressed.

Random Plays tracks from a CD or CDs in random order.

Press MENU. Select the menu for the sound source and press ENTER.

Select Random and press ENTER. Select Single disc or All discs to play

tracks from a single disc or all discs in the CD changer in random order.

RND or RND ALL is shown on the display while the function is active.

Press the right arrow on the navigation button to select the next random track.

Deactivating Press EXIT. NOTE! You can only select the next random track on the current disc.

Scan Scan plays the first ten seconds of each track.

Press SCAN. NOTE! Press EXIT to play the current track.

Important! Use only standard 12 cm CDs, no mini CDs. Do not use CDs with adhesive disc labels. The heat from the CD player may cause the label to detach from the disc. This could damage the CD player.

V50 book w446.book Page 194 Thursday, September 9, 2004 10:27 AM

195

Infotainment system

Disc text Some CDs have title information. The infor- mation is displayed as text on the display.

Activating disc text Press MENU. Select the menu for the

sound source and press ENTER. Select Disc text and press ENTER. If information is stored on the disc, this is shown on the display.

Deactivating Select Disc text and press ENTER.

Ejecting single disc Press the eject button. The CD remains ejected for only 12 seconds. The changer will then feed the disc back in and switch to pause mode. Press CD/MD to reactivate the player.

Ejecting all discs Press and hold the eject button (for longer than 2 seconds) to initiate the eject function. The entire magazine is emptied, disc by disc. Eject all is shown on the display.

V50 book w446.book Page 195 Thursday, September 9, 2004 10:27 AM

196

Infotainment system

Menu settings and options Audio

FM1/FM2 menu 1. News Off/1

2. TP On/Off1

3. PTY 3.1. Select PTY

3.1.1. CLEAR ALL PTY 3.1.2. List of PTY

3.2. Search PTY 3.3. Show PTY On/Off

4. Radio text On/Off1

5. Advanced radio settings 5.1. TP

5.1.1. TP station 5.1.2. TP search On/Off1

5.2. News station 5.3. AF On1/Off 5.4. Regional On/Off1

5.5. EON 5.5.1. Off 5.5.2. Local 5.5.3. Distant1

5.6. Reset all 6. Audio settings

6.1. Surround AM/FM (certain models) 6.1.1. Dolby Pro Logic II 6.1.2. 3 channel 6.1.3. Off1

6.2. Surround CD/MD (certain models) 6.2.1. Dolby Pro Logic II 6.2.2. 3 channel 6.2.3. Off

6.3. Subwoofer On1/Off (option) 6.4. Equalizer front (certain models) 6.5. Equalizer rear (certain models) 6.6. Automatic volume control

6.6.1. Low 6.6.2. Medium 6.6.3. High

6.7. Reset all

AM menu 1. Audio settings

1.1. Surround AM/FM (certain models) 1.1.1. Dolby Pro Logic II 1.1.2. 3 channel Off1

1.2. Surround CD/MD (certain models) 1.2.1. Dolby Pro Logic II 1.2.2. 3 channel 1.2.3. Off

1.3. Subwoofer On1/Off (option) 1.4. Equalizer front (certain models) 1.5. Equalizer rear (certain models) 1.6. Automatic volume control

1.6.1. Low 1.6.2. Medium 1.6.3. High

1.7. Reset all

CD menu 1. Random 2. News (Off1) 3. TP (Off1) 4. Audio settings

4.1. Surround AM/FM (certain models) 4.1.1. Dolby Pro Logic II 4.1.2. 3 channel 4.1.3. Off1

4.2. Surround CD/MD (certain models) 4.2.1. Dolby Pro Logic II 4.2.2. 3 channel 4.2.3. Off

4.3. Subwoofer (On1) (option) 4.4. Equalizer front (certain models) 4.5. Equalizer rear (certain models) 4.6. Automatic volume control

4.6.1. Low 4.6.2. Medium 4.6.3. High

4.7. Reset all

V50 book w446.book Page 196 Thursday, September 9, 2004 10:27 AM

197

Infotainment system

CD changer menu 1. Random

1.1. Off1

1.2. Single disc 1.3. All discs

2. News (Off1) 3. TP (Off1) 4. Disc text (Off1) 5. Audio settings

5.1. Surround AM/FM (certain models) 5.1.1. Dolby Pro Logic II 5.1.2. 3 channel 5.1.3. Off1

5.2. Surround CD/MD (certain models) 5.2.1. Dolby Pro Logic II1

5.2.2. 3 channel 5.2.3. Off

5.3. Subwoofer (On1) (option) 5.4. Equalizer front (certain models) 5.5. Equalizer rear (certain models) 5.6. Automatic volume control

5.6.1. Low 5.6.2. Medium 5.6.3. High

5.7. Reset all

CD/MD menu 1. Random 2. News (Off1) 3. TP (Off1) 4. Disc text (Off1) 5. Audio settings

5.1. Surround AM/FM (certain models) 5.1.1. Dolby Pro Logic II 5.1.2. 3 channel 5.1.3. Off1

5.2. Surround CD/MD (accessory) 5.2.1. Dolby Pro Logic II1

5.2.2. 3 channel 5.2.3. Off

5.3. Subwoofer (On1) (option) 5.4. Equalizer front (option) 5.5. Equalizer rear (option) 5.6. Automatic volume control

5.6.1. Low 5.6.2. Medium 5.6.3. High

5.7. Reset all

1. Default/Factory setting

V50 book w446.book Page 197 Thursday, September 9, 2004 10:27 AM

198

Infotainment system

Telephone (option)

Telephone system components

V50 book w446.book Page 198 Thursday, September 9, 2004 10:27 AM

199

Infotainment system

1. Antenna

The antenna is mounted on the roof.

2. Steering wheel keypad

The majority of the telephone functions can be controlled using the keypad. When the telephone is active, the keypad can only be used for telephone functions. Telephone information is always displayed on the control panel when the telephone is activated.

3. Microphone

The hands free microphone is integrated in the roof console beside the rearview mirror.

4. Control panel

All functions (except call volume) can be controlled using the keypad in the control panel. The display shows menu functions, messages, telephone numbers, etc.

5. Privacy handset (option)

6. SIM card

The SIM card is located in a holder in the glovebox.

General Always put traffic safety first. If the driver needs to use the privacy

handset, park the car in a safe place first. Switch off the telephone system when

refuelling the car.

Switch off the system near blasting work. Let only authorised personnel service the

telephone system.

Emergency calls Emergency calls to alarm centres can be made without a SIM card as long as there is coverage by a GSM operator.

Making an emergency call: Activate the telephone. Ring the emergency number that applies

to your region (within EU: 112). Press ENTER.

Loudspeaker The telephone uses the loudspeaker in the drivers door or the audio systems centre speaker (if there is one).

V50 book w446.book Page 199 Thursday, September 9, 2004 10:27 AM

200

Infotainment system

Telephone functions

SIM card The telephone can only be used with a valid SIM card (Subscriber Identity Module). The card is provided by your network operator. Contact your network operator if you experience difficulties with the SIM card. Insert the SIM card to start using the telephone. Switch off the telephone. Open the glovebox and the cover for the

SIM card holder. Pull out the SIM card holder. Place the card metal side up. Ensure that

the bevelled corner of the SIM card matches the bevel of the holder.

Carefully press the holder back in.

Double SIM cards Many network operators offer double SIM cards - one for your car and one for another telephone. A double SIM card allows you to have the same number for two different telep- hones. Ask your network operator about the offers available and the use of double SIM cards.

Specifications

IMEI number To block the telephone, you must provide your network operator with the telephones IMEI number. This is a 15 digit serial number that is programmed in the phone. To display this number, dial *#06#. Make a note of this number and keep it in a safe place.

Output 2 W

SIM card Small

Memory entries 2551

1. The capacity of the SIM cards memory varies depending on the subscription.

SMS (Short Message Service)

Yes

Data/Fax No

Dualband Yes (900/ 1800)

V50 book w446.book Page 200 Thursday, September 9, 2004 10:27 AM

201

Infotainment system

Control panel on centre console

1. PHONE On/Off/Standby. 2. MENU Opens the main menu. 3. ENTER Accept a call, select in the

menu or activate the telephone from standby. Press ENTER once to display the last dialled number.

4. EXIT Terminate/reject a call, scroll back in the menu, cancel a selection or erase entered digits/characters.

5. Navigation button Scroll up or down in the menus, scroll forwards or back when entering text and digits.

6. Display 7. Number/character keys and menu

option shortcuts. 8. VOLUME Controls the background

volume from the radio, for example, during a call.

Steering wheel keypad 1. ENTER Accept a call, scroll the menu

or activate the telephone from standby. Press ENTER once to display the last dialled number.

2. EXIT Terminate/reject a call, scroll back in the menu, cancel a selection or erase entered digits/characters.

3. Volume Increase/decrease call volume during a call.

4. Navigation button Scroll up/down in menus, scroll forward/back when entering text and digits.

V50 book w446.book Page 201 Thursday, September 9, 2004 10:27 AM

202

Infotainment system

Telephone functions

Switch When the telephone system is active or in standby mode, a handset is shown on the display. If the cars ignition is switched off while the telephone system is on, the system will be on the next time the ignition is switched on. No calls can be received while the telephone system is switched off.

Activating the telephone system Press PHONE. Enter the PIN code and press ENTER. Switching off Press and hold the PHONE button to

switch off the telephone system. Standby Press PHONE or EXIT to out the

telephone system into standby. Reactivating The system can be reactivated by

touching the PHONE button.

Making and receiving calls To call:

Dial the number and press ENTER on the steering wheel keypad or on the control panel, or lift the handset.

Receiving a call:

Press ENTER or lift the handset. You can also use Automatic Answer. See menu option 4.3.

The cars audio system can be muted automatically while a telephone conversation is in progress. See menu option 5.5.3.

Volume reduction during telephone call If the telephone rings when the radio is switched on, the volume is lowered when the call is answered. When the call is concluded, the volume returns to the previously set level. It is possible to adjust the radio volume when the telephone is in use and this new volume kept after the call is ended. The audio system can also be muted during a telephone call. See menu 5.5.3. This function only applies to the Volvo integrated telephone system.

Ending a call Press EXIT or hang up the handset. The audio system resumes its previous activity. Reject an incoming call by pressing EXIT.

Standby Calls can be received while the audio system is active and information from an audio system source is shown on the display. The telephone must be in active mode to use the other functions of the telephone system.

Menu shortcuts In the menu system, you can use numbers instead of the arrows and ENTER to select a menu at the main menu level. Each menu selection is numbered. The numbers are shown on the display together with the menu option.

Traffic safety For safety reasons, parts of the menu system cannot be accessed at speeds in excess of 8 km/h. Only activities started in the menu system can be completed. The speed limiter can be deactivated using menu function 5.6.1 Menu lock.

IDIS (Intelligent Driver Information System) The IDIS system allows incoming telephone calls and text (SMS) messages to be delayed so that the driver can concentrate on driving. Incoming calls and text messages can be delayed by 5 seconds before they are connected. Missed calls are shown on the display. IDIS can be deactivated using menu function 5.6.2.

V50 book w446.book Page 202 Thursday, September 9, 2004 10:27 AM

203

Infotainment system

Privacy handset (option) Making a call using the handset:

Dial the number using the keypad on the centre console and lift the handset to make the call. Press the handset down before lifting it.

The call is ended when the handset is hung back in its cradle.

Adjust the handset volume using the dial on the side of the handset.

To switch to handsfree without ending the call:

Press the right arrow on the steering wheel keypad (or the menu button on the control panel) and select Handsfree.

Press ENTER and return the handset to its cradle. If the handset is already removed from its cradle at the start of a call, the other party will be audible via the handsfree system. Press the MENU button, scroll to Handset and press ENTER in order to transfer to the handset.

Last dialled number The telephone automatically stores the last telephone numbers/names called.

Calling the last dialled number:

Press ENTER on the steering wheel keypad or control panel (when in active mode).

Use the navigation buttons to scroll forward or back through the last numbers dialled. These are shown on the display.

Press ENTER.

Speed dial A number stored in the phone book can be linked to a speed dial button (1-9).

Select Phone book on the menu and press ENTER.

Scroll to Speed dial, menu 3.4, and press ENTER.

Select which number is to be the speed dial number. Press ENTER to confirm.

Search for the desired name or phone number in the phone book. Press ENTER to select.

To make a call, press and hold the desired speed dial button for two seconds or press the button briefly and then press ENTER.

NOTE! When the telephone is switched on, it takes a while before speed dialling is available. Menu option 3.4.1 must be activated to use the speed dial function.

Call waiting A two-tone signal during a telephone call indicates that there is another incoming call. The display shows: Answer? Receiving a call:

Press ENTER. Your current call will be put on hold.

Select Hold/Resume to finish the call and return to a call on hold.

To reject the incoming call: Press EXIT.

To end the current call: Press EXIT. The function can be de-selected in the menu.

Functions during a call Several functions are available during a call.

V50 book w446.book Page 203 Thursday, September 9, 2004 10:27 AM

204

Infotainment system

Telephone functions

Scroll with the navigation button and press ENTER to make a selection.

Several functions are available during a call while another call is on hold.

Scroll with the navigation button and press ENTER to make a selection.

Call volume Control the call volume during the call by pressing the buttons with the large and small loudspeakers on the steering wheel keypad.

When the telephone is activated, the steering wheel keypad only controls the telephone functions.

The telephone must be in standby mode to control the audio system using the steering wheel keypad.

Phone book Telephone numbers and names can be stored in either the telephone memory or the SIM card memory.

If the number of the person calling is stored in the phone book, the name of the caller will be shown on the display.

The telephone memory can store up to 255 names.

Storing a telephone numbers and name:

Press MENU. Select Phone book and press ENTER. Scroll to Enter item and press ENTER. Enter a name and press ENTER. Enter a number and press ENTER. Select the memory in which the entry is to

be saved an d press ENTER.

Copying entries between the SIM card and Phone book Copying from the SIM card to the phone book:

Press MENU. Select Phone book. Select Copy all. Select From SIM card to phone book and

press ENTER. You can also copy entries from the phone book to the SIM card.

Erasing names Erasing from the phone book:

Press MENU. Select Phone book. Select Search. Enter the first letter of the name (or the

entire name) and press ENTER. Scroll to the name you wish to delete and

press ENTER. Select Erase to delete the entry.

Entering a name/message Press the button with the relevant character. Press once for the first character, twice for the second character and so on. Press 1 for space.

Secret mode/ Secret mode off

Secret mode

Hold/Resume Choose whether the call is to be put on hold or resumed.

Handsfree/ headset

Use the handsfree function or headset

Phone book Show phone book

Secret mode/ Secret mode off

Secret mode

Handsfree/ headset

Use the handsfree function or headset

Three-way calling

Conference call (further options)

Switch Switch between two calls

Phone book Show phone book

V50 book w446.book Page 204 Thursday, September 9, 2004 10:27 AM

205

Infotainment system

Quitting text input: Erase all entered characters with by

pressing and holding EXIT Return to the menu by again pressing and

holding EXIT.

Calling from the memory Press MENU Scroll downward using the navigation

button (or the left arrow button on the steering wheel to search the phone book).

Press ENTER. Scroll to the desired name using the navigation button or press the first letter of the name (or enter the entire name). Press ENTER.

Press ENTER to dial the selected number.

1 space 1- ? ! , . : " ' ( ) 2 a b c 2 3 d e f 3 4 g h i 4 5 j k l 5 6 m n o 6 7 p q r s 7 8 t u v 8 9 w x y z 9 * if you enter two letters in a row

from the same button, press * between them or wait a few seconds.

0 + 0 @ * # & $ / % # switch between upper and lower

case EXIT Erase the last entered character. If

you press and hold this, the entire number or text is deleted.

V50 book w446.book Page 205 Thursday, September 9, 2004 10:27 AM

206

Infotainment system

Menu settings and options Telephone

Telephone menu 1. Call log

1.1. Missed calls 1.2. Received calls 1.3. Outgoing calls 1.4. Erase list

1.4.1. All calls 1.4.2. Missed calls 1.4.3. Received calls 1.4.4. Outgoing calls

1.5. Call duration 1.5.1. Last call 1.5.2. Number of calls 1.5.3. Total time 1.5.4. Reset time

2. Messages 2.1. Read 2.2. Write 2.3. Message settings

2.3.1. SMSC number 2.3.2. Validity period 2.3.3. Message type

3. Phone book 3.1. Enter item 3.2. Search 3.3. Copy all

3.3.1. SIM to telephone 3.3.2. Telephone to SIM

3.4. Speed dial 3.4.1. Active 3.4.2. Select number

3.5. Empty SIM 3.6. Empty telephone 3.7. Memory status

4. Call options. 4.1. Transmit number 4.2. Call waiting 4.3. Automatic answer 4.4. Automatic redial 4.5. Call divert

4.5.1. All calls 4.5.2. When busy 4.5.3. When not answered 4.5.4. If unreachable 4.5.5. Fax calls 4.5.6. Data calls 4.5.7. Cancel all diverts

5. Tel. settings 5.1. Network selection

5.1.1. Automatic 5.1.2. Manual

5.2. Language 5.2.1. English UK 5.2.2. English US 5.2.3. Espaol 5.2.4. Franais CAN

5.2.5. Franais FR 5.2.6. Italiano 5.2.7. Nederlands 5.2.8. Portugus BR 5.2.9. Portugus P 5.2.10. Suomi 5.2.11. Svenska 5.2.12. Dansk 5.2.13. Deutsch

5.3. SIM security 5.3.1. On 5.3.2. Off 5.3.3. Automatic

5.4. Change codes 5.4.1. PIN code 5.4.2. Telephone code

5.5. Volume 5.5.1. Ringer volume 5.5.2. Ringer tone 5.5.3. Mute radio 5.5.4. Message beep

5.6. Traffic safety 5.6.1. Menu lock 5.6.2. IDIS

5.7. Factory settings.

V50 book w446.book Page 206 Thursday, September 9, 2004 10:27 AM

207

Infotainment system

Menu options, description 1. Call log 1.1. Missed calls List of missed calls. You can choose to call, erase or store the number in the phone book.

1.2. Received calls List of received calls. You can choose to call, erase or store the number in the phone book.

1.3. Outgoing calls List of dialled numbers. You can choose to call, erase or store the number in the phone book.

1.4. Erase list Erase the lists found in the menus 1.1, 1.2 and 1.3 as below.

1.4.1. All 1.4.2. Missed 1.4.3. Received 1.4.4. Outgoing 1.5. Call duration Call duration of all calls or of the latest call.

1.5.1. Last call 1.5.2. Number of calls 1.5.3. Total time 1.5.4. Reset time The telephone code is required to reset the call timer (see Menu 5.4).

2. Messages 2.1. Read Received text messages. Select whether to erase, forward, change or save the entire message or parts of it.

2.2. Write Write a message using the keypad. Choose whether to save or send it.

2.3. Message settings Enter the number (SMSC number) of the message centre to which you want your messages transferred as well as how long they are to be saved at the message centre.

2.3.1. SMSC number 2.3.2. Validity period 2.3.3. Message type Contact your network operator for information about these settings and for an SMSC number. Normally, these settings should not be altered.

3. Phone book 3.1. Enter item Store names and numbers in the phone book. See the section on phone book functions for more information.

3.2. Search Search for a name in the phone book.

3.3. Copy all Copy telephone numbers and names from the SIM card to the telephone memory.

3.3.1. From SIM to telephone memory 3.3.2. From telephone to SIM memory 3.4. Speed dial A number stored in the phone book can be stored as a speed dial number.

3.5. Empty SIM Select to erase the entire memory of the SIM card.

3.6. Empty memory Erase the entire telephone memory.

3.7. Memory status Shows how many entries are occupied by names and numbers in the SIM card and telephone memory. The table shows how many spaces are occupied of the total, e.g. 100(250).

4. Call options 4.1. Transmit number Select whether or not your own number should be displayed to the person you call. Contact your network operator regarding ex- directory numbers.

V50 book w446.book Page 207 Thursday, September 9, 2004 10:27 AM

208

Infotainment system

Menu settings and options Telephone

4.2. Call waiting Select whether or not you want to be alerted during a phone call that there is another incoming call.

4.3. Automatic answer Automatically answers incoming calls.

4.4. Call back Calls a previously engaged number.

4.5. Call divert service Choose when and what type of calls are to be diverted to a specified telephone number.

4.5.1. All calls (this setting only applies during the call in progress).

4.5.2. When busy 4.5.3. When not answered 4.5.4. If unreachable 4.5.5. Fax calls 4.5.6. Data calls 4.5.7. Cancel all diverts

5. Telephone settings 5.1. Network selection Choose a network automatically or manually. The selected operator is shown in the display in the telephones basic mode.

5.1.1. AUTO 5.1.2. Manual

5.2. Language Select the telephone language.

5.2.1. English UK 5.2.2. English US 5.2.3. Espaol 5.2.4. Franais CAN 5.2.5. Franais FR 5.2.6. Italiano 5.2.7. Nederlands 5.2.8. Portugus BR 5.2.9. Portugus P 5.2.10. Suomi 5.2.11. Svenska 5.2.12. Dansk 5.2.13. Deutsch 5.3. SIM security Select if the PIN code should be on, off or if the telephone should automatically give the PIN code.

5.3.1. On 5.3.2. Off 5.3.3. Automatic 5.4. Change codes Change the PIN code or telephone code 5.4.1 PIN code 5.4.2.Telephone code (use 1234 until you change to your own code). The telephone code is used to reset the call timer. Make a note of your code and save it in a safe place.

5.5. Volume 5.5.1. Volume. Adjust the ring tone

volume. 5.5.2. Ring tone. There are seven different

ring tones. 5.5.3. Mute radio: On/Off 5.5.4. Message beep 5.6. Traffic safety Disengage the speed function, i.e. make all menu options accessible while driving.

5.6.1. Menu lock 5.6.2. IDIS The IDIS function can be deactivated. Incoming calls will not be delayed, irrespective of whether the car is being driven or not.

5.7. Factory settings Reset the systems factory settings.

V50 book w446.book Page 208 Thursday, September 9, 2004 10:27 AM

209

Technical data Type designations 210 Dimensions and weights 211 Engine specifications 212 Capacities 214 Fuel 217 Catalytic converter 219 Electrical system 220

V50 book w446.book Page 209 Thursday, September 9, 2004 10:27 AM

210

Technical data

Type designations

Whenever contacting your Volvo dealer and when ordering spare parts and accessories for your car, it makes things easier if you know your cars type designation, vehicle identification number and engine number.

1. Type designation, VIN, maximum permitted loads, code number for colour and trim, and type approval number (on right-hand B-pillar).

2. Engine type designation, component and serial number (on the right-hand side of the engine).

3. VIN (Type and model year designa- tions and chassis number) stamped in the engine compartment underneath the windscreen.

4. Gearbox type designation and serial number,

(a) manual gearbox (on front side)

(b), (c) automatic gearbox (on the top).

V50 book w446.book Page 210 Thursday, September 9, 2004 10:27 AM

211

Technical data

Dimensions and weights

Dimensions Length: 451 cm

Width: 177 cm

Wheelbase: 264 cm

Front track: 154-155 cm

Rear track: 153-154 cm

Weights The kerb weight includes the driver, the fuel tank 90 % full and all fluids. The weight of passengers and accessories, such as a towbar, towball load (when a trailer is hitched, see table), load carriers, and roof box etc. influence the payload and must not be included in the kerb weight. Permitted weight (in addition to driver) = Gross vehicle weightKerb weight.

For the location of the label, see page 210.

1. Max. total weight 2. Max. train weight (car+trailer) 3. Max. front axle load 4. Max. rear axle load Maximum load: See registration document.

Maximum roof load: 75 kg

Maximum trailer weight

Maximum towball load:

1.6 1200 kg 75 kg 1.6D manual 1300 kg 1.8 1300 kg others 1500 kg

Trailer without brakes

Maximum trailer weight

Maximum towball load:

700 kg 50 kg

WARNING! The cars driving characteristics change depending on how heavily it is loaded and how the load is distributed.

V50 book w446.book Page 211 Thursday, September 9, 2004 10:27 AM

212

Technical data

Engine specifications

Engine type designation, component and serial number can be read on the engine, see page 210.

1.6 1.8 2.4 2.4i

Engine designation B4164S3 B4184S11 B5244S5 B5244S4 Output (kW/rps) 74/100 92/100 103/83 125/100 (hp/rpm) 100/6000 125/6000 140/5000 170/6000 Torque (Nm/rps) 150/67 165/67 220/67 230/73 (kpm/rpm) 15.3/4000 16.8/4000 22.4/4000 23.4/4400 No. of cylinders 4 4 5 5 Bore (mm) 79 83 83 83 Stroke (mm) 81,4 83.1 90 90

Swept volume (dm3 or litres) 1.60 1.80 2.44 2.44

Compression ratio 11.0:1 10.8:1 10.3:1 10.3:1 Spark plugs: Electrode gap (mm) 1.2 1.3 3x0.6 +/-0.1 3x0.6 +/-0.1 Tightening torque (Nm) 15 2 12 30 30

V50 book w446.book Page 212 Thursday, September 9, 2004 10:27 AM

213

Technical data

Engine type designation, component and serial number can be read on the engine, see page 210.

T5 1.6D 2.0D 2.0D

Engine designation B5254T3 D4164T D4204T D4204T21

Output (kW/rps) 162/83 81/67 100/67 98/67 (hp/rpm) 220/5000 110/4000 136/4000 133/4000 Torque (Nm/rps) 320/25-80 240/ 320/33 320/33 (kpm/rpm) 32.6/1500-4800 24.5/ 32.6/2000 32.6/2000 No. of cylinders 5 4 4 4 Bore (mm) 83 75 85 85 Stroke (mm) 93.2 88.3 88 88

Swept volume (dm3 or litres) 2.52 1.56 2.00 2.00

Compression ratio 9.0:1 18.3:1 18.5:1 18.5:1 Spark plugs: Electrode gap (mm) 0.7 +0.1 - - - Tightening torque (Nm) 30 - - -

1. France

V50 book w446.book Page 213 Thursday, September 9, 2004 10:27 AM

214

Technical data

Capacities

Engine oil

Extreme driving conditions Check the oil more often in extreme driving conditions such as alpine driving with a great deal of engine braking or motorway driving at high speed. These conditions may cause abnormally high oil temperatures and oil consumption. Petrol engines: For extreme conditions, choose a fully synthetic engine oil to provide extra protection.

Volvo recommends Castrol oil products.

Engine variant Volume between MIN

MAX Volume1

litres Recommended oil grade:2 Viscosity3

1.6 B4164S3 0-0.75 4.0 WSS-M2C913-B SAE 5W-30

1.8 B4184S11 0-0.75 4.3

2.4 B5244S5 0-1.6 5.8 ACEA A1/B1

2.4i B5244S4

T5 B5254T3

1.6D D4164T 0-1.0 3.7 WSS-M2C913-B

2.0D D4204T 0-2.0 5.5

2.0D D4204T2

1. Including filter change. 2. Alternative ACEA A5/B5 3. The oil grade requirement must be fulfilled even if a different viscosity is chosen according to the diagram.

Important! Always use oil of the recommended grade and correct viscosity. Do not use oil additives. These can damage the engine.

If the system is topped up with a different oil, contact the nearest authorised Volvo workshop for servicing.

V50 book w446.book Page 214 Thursday, September 9, 2004 10:27 AM

215

Technical data

Other fluids and lubricants

Important! The recommended transmission fluid must be used to prevent damage to the gearbox. Do not mix with any other transmission fluid. If the transmission is topped up with a different fluid, contact an authorised Volvo workshop for servicing.

Fluid Engine variant/number of components Volume Recommended oil grade: Gearbox oil 1.6 Manual 5 speed 2.1 litres Transmission fluid: WSD-M2C200-C

1.8 Manual 5 speed 1.9 litres 1.6D Manual 5 speed 1.9 litres 2.0D Manual 6 speed 1.7 litres 2.4 Manual 5 speed 2.1 litres Transmission fluid: MTF 97309-10 2.4i Manual 5 speed 2.1 litres T5 Manual 6 speed 2.0 litres T5 Automatic gearbox 7.75 litres Transmission fluid: JWS 3309

Coolant 5 cyl. Petrol, manual gearbox 8.0 litres Coolant with corrosion inhibitor mixed with water, see packaging. The thermostat starts opening at: 90 C in petrol engines and at 82 C in diesel engines. petrol engine (1.6) 82 C diesel engine (1.6D) 83 C

5 cyl. Petrol, automatic gearbox 8.5 litres 4 cyl. Petrol (1.8) 7.5 litres 4 cyl. Diesel (2.0D) 9.5 litres 4 cyl. Petrol (1.6) 6.2 litres 4 cyl. Diesel (1.6D) 7.2 litres

Air conditioning1 180-200 grams Compressor oil PAG 500-600 grams Refrigerant R134a (HFC134a)

Brake fluid 0.6 litres DOT 4+ Power steering System: 1.2 litres Power steering fluid: WSS M2C204-A or

equivalent product with same specifica- tions.

of which reservoir 0.2 litres

V50 book w446.book Page 215 Thursday, September 9, 2004 10:27 AM

216

Technical data

Capacities

Washer fluid 4 cyl. Petrol/Diesel 4.0 litres Use a washer antifreeze recommended by Volvo mixed with water at temperatures below freezing.

5 cyl. Petrol 6.5 litres

Fuel tank See page 217

1. Weights can vary depending on the engine variant. Contact an authorised Volvo workshop for the exact information.

Fluid Engine variant/number of components Volume Recommended oil grade:

V50 book w446.book Page 216 Thursday, September 9, 2004 10:27 AM

217

Technical data

Fuel

Consumption, emissions and volume

Engine Gearbox Consumption litre/100 km

Emissions of CO2 (g/km)

Tank volume (litres)

1.6 B4164S3 Manual 5 speed (IB5) 7.2 171 55 1.8 B4184S11 Manual 5 speed (MTX75) 7.3 174 55 2.4 B5244S5 Manual 5 speed (M56) 8.5 203 62

Automatic gearbox (AW55-50/51) 9.2 220 2.4i B5244S4 Manual 5 speed (M56) 8.6 204 62

Automatic gearbox (AW55-50/51) 9.2 220 T5 B5254T3 Manual 6-speed (M66) 8.8 209 62

Automatic gearbox (AW55-50/51) 9.6 229 AWD Manual 6-speed (M66) 9.6 229 58

Automatic gearbox (AW55-50/51) 10.2 243 1.6D D4164T (EURO3)

(EURO4) Manual 5 speed (MTX75) 5.0 132 55

2.0D D4204T (EURO3) Manual 6 speed (MMT6) 5.7 153 55 (EURO4) 5.8 154 (EURO3) Manual 5 speed (M56L2) 5.5 145 (EURO4) 5.5 145

2.0D D4204T21 (EURO3) (EURO4) (7CV)

Manual 6 speed (MMT6) 5.6 148 55

1. France

V50 12 Tekniska data w446.fm Page 217 Monday, November 8, 2004 3:48 PM

218

Technical data

Fuel

Fuel consumption and emissions of carbon dioxide Official fuel consumption figures are based on a standard driving cycle in accordance with EU Directive 80/1268 comb. Fuel consumption figures may change if the car is equipped with extra equipment that affects the cars weight. The manner in which the car is driven and other non-technical factors can affect fuel consumption. Consumption is higher and power output lower for fuel with an octane rating of 91 RON.

Petrol Most engines can be run with octane ratings of 91, 95 and 98 RON.

91 RON must not be used in 4 cylinder engines.

95 RON can be used for normal driving. 98 RON is recommended for optimum

performance and minimum fuel consumption.

When driving in temperatures above +38 C, it is recommended to use fuel with the highest possible octane rating for optimum performance and fuel economy.

Petrol: Standard EN 228

Diesel: Standard EN 590

V50 book w446.book Page 218 Thursday, September 9, 2004 10:27 AM

219

Technical data

Catalytic converter

Catalytic converter The purpose of the catalytic converter is to purify exhaust gases. It is located in the flow of exhaust gasses close to the engine so that it quickly reaches operating temperature. The catalytic converter consists of a monolith (ceramic or metal) with channels. The channel walls are lined with a thin layer of platinum, rhodium and palladium. These metals act as catalysts, i.e. they participate in and accelerate a chemical reaction without being used up themselves.

Lambda-sondTM oxygen sensor The Lambda-sond is part of a control system intended to reduce emissions and improve fuel economy.

An oxygen sensor monitors the oxygen content of the exhaust gases leaving the engine. This value is fed into an electronic system that continuously controls the injectors. The ratio of air to fuel is continu- ously adjusted. These adjustments create optimal conditions for efficient combustion, and together with the three-way catalytic converter reduce harmful emissions (hydro- carbons, carbon monoxide and nitrous oxides).

V50 book w446.book Page 219 Thursday, September 9, 2004 10:27 AM

220

Technical data

Electrical system

General 12 volt system with a voltage-regulated alter- nator. Single pole system in which the chassis and engine block are used as conductors.

* Cars equipped with High Performance audio system.

** Diesel cars with Premium Sound audio system, fuel-driven heater, RTI.

If the battery is changed, replace it with a battery of the same cold start capacity and reserve capacity as the original (see the decal on the battery).

Alternator Max. current = 120/150 A1

Starter motor Output = 1.4/1.9 kW1

Battery

Voltage 12 V 12 V 12 V

Cold start capacity (CCA) 520 A 600 A* 700 A**

Reserve capacity (RC) 100 min 120 min 150 min

1. Dependent on engine variant

V50 book w446.book Page 220 Thursday, September 9, 2004 10:27 AM

221

Technical data

Electrical system

Bulbs

Lighting Output W Socket

1. Dipped beam 55 H7 2. Bi-Xenon 35 D2S 3. Main beam 55 HB3 4. Brake lights, reversing lamps, rear fog lamp 21 BA15s 5. Direction indicators, front/rear (yellow) 21 BAU 15s 6. Rear position/parking lamps, rear side marker lamps 5 BAY15d 7. Courtesy lighting, cargo area lighting, number plate lighting

5 SV8.5

8. Vanity mirror 1.2 SV5.5 9. Front position/parking lamps, front side marker lamps 5 W 2.1 x 9.5d 10. Direction indicators in door mirrors (yellow) 5 W 2.1 x 9.5d 11. Fog lamps 55 H11 Glovebox lighting 3 BA9

V50 book w446.book Page 221 Thursday, September 9, 2004 10:27 AM

222

Technical data

V50 book w446.book Page 222 Thursday, September 9, 2004 10:27 AM

223

A A/C ....................................................................68 ABS ................................................................ 115 Additional heater ............................................76 Air conditioning ..............................................66 Air distribution ................................................73 Air distribution, A/C .......................................69 Air quality system, ECC ................................71 Airbag, drivers side .......................................17 Airbag, passenger side .................................17 Airbags and inflatable curtains, inspection ........................................................29 Alarm ....................................................100, 101 Alarm signals ................................................ 101 Alarm system, test ...................................... 102 All-wheel drive ............................................. 114 Alternator ...................................................... 220 Approach lighting ..........................................60 Automatic carwashes ................................ 152

B Backrest, front seat .......................................78 Backrests, rear ...............................................84 Battery ............................104, 123, 167, 220 Bird droppings ............................................. 152 Bonnet ........................................................... 160 Booster cushion, integrated ........................33 Brake fluid ..................................................... 164 Brake system ............................................... 115 Bulb holder ................................................... 172

C Car care .........................................................151 Car upholstery ..............................................152 Carbon dioxide .............................................218 Cargo area ................................. 86, 133, 174 Cargo cover .................................................... 86 Catalytic converter ......................................219 Child safety ..................................................... 30 Child safety locks .......................................... 99 Child seat, fitting ........................................... 35 Child seats and airbags ............................... 30 Child seats and side airbags ...................... 22 Children in the car, placement ................... 32 Cigarette lighter ............................................. 44 Clean inside and out ........................................3 Cleaning, Car washing ...............................152 Clutch fluid ....................................................164 Cold start ......................................................111 Collision sensors ........................................... 24 Colour code ..................................................154 Combined instrument panel ........................ 38 Compass, calibrating .................................... 58 Condensation ...............................................161 Coolant ..........................................................164 Cooling system ............................................104 Courtesy lighting .........................................173 Crash mode .................................................... 28 Cruise control ................................................. 51

D Defroster ..........................................................69 Diesel particle filter ..................................... 106 Dimensions ................................................... 211 Dipped beam ............................................... 170 Direction indicators ............................ 47, 171 Display ..............................................................43 Door mirrors ....................................................59 Drivers door control panel ..........................12 DSTC ..................................................... 44, 117

E ECC ..................................................................67 Economical driving ..................................... 104 Electrical socket in the centre console .....44 Electrical system ......................................... 220 Emissions ..................................................... 217 Engine compartment .................................. 160 Engine oil ............................................162, 214 Engine specifications ................................. 212 Environment ...................................................... 3 Environmental philosophy .............................. 3 Expectant mothers .........................................15

F Fan, A/C ...........................................................68 Fan, ECC .........................................................70 Floor mats ........................................................83 Fluids ............................................................. 215

V50 book w446.book Page 223 Thursday, September 9, 2004 10:27 AM

224

Fog lamps ............................................. 45, 172 Fuel consumption .............................217, 218 Fuel consumption, current ...........................48 Fuel filler flap ........................................ 45, 105 Fuel system .................................................. 161 Fuses ............................................................. 175

G Gearbox, automatic .................................... 111 Gearbox, manual ......................................... 109 Glovebox ..................................................83, 98 Gross vehicle weight ................................. 211

H Handbrake .......................................................54 Hazard warning flashers ...............................53 Head restraints ...............................................84 Headlamp dipper ...........................................47 Headlamp levelling ........................................45 Headlamp pattern ....................................... 134 Headlamp washer ..........................................49 Headlamps ......................................................45 Heated front seats .........................................69 Heated rear window ......................................69 Heated rearview and door mirrors .............69 Home safe lighting ........................................60

I Ignition keys ................................................. 106

Ignition system ............................................... 95 Immobiliser ............................................92, 106 "Important!" texts ..............................................2 Indicator symbols .................................. 39, 40 Inflatable curtains .......................................... 24 Information display ........................................ 43 Instrument lighting ......................................... 45 Instrument overview, left-hand drive ............8 Instrument overview, right-hand drive ....... 10 Integrated booster cushion ......................... 33 Interior .............................................................. 77 Interior lighting ............................................... 80

K Kerb weight ..................................................211 Key .................................................................... 92 Key blade ................................................ 92, 93 Keyless drive .................................................. 95 Keys .................................................................. 92 Kick-down .....................................................111

L Lambda-sond ...............................................219 Lighting ..........................................................169 Lighting panel ................................................. 45 Loading ..........................................................133 Locking ............................................................ 97 Locks ........................................................ 91, 95 Lubricants .....................................................215

M Magnetic zones ..............................................59 Main beam .................................................... 170 Maintenance ................................................. 157 Messages ........................................................43

N "Note" texts ....................................................... 2 Number plate lighting ................................ 173

O Oil filter .......................................................... 162 Oil grade ....................................................... 214

P PACOS ............................................................20 Paint ............................................................... 154 Paintwork damage ...................................... 154 Panel vents ......................................................66 Parking .......................................................... 119 Parking brake ..................................................54 Parking heater ................................................74 Parking heater, battery and fuel ..................75 Parking heater, parking .................................75 Parking lamps .............................................. 171 Passenger compartment filter .....................66 Petrol grade ................................................. 218 Pinch protection, sunroof .............................62 Polishing ....................................................... 153

V50 book w446.book Page 224 Thursday, September 9, 2004 10:27 AM

225

Position lamps ..................................... 45, 171 Power steering fluid ................................... 165 Power windows ..............................................55 Puncture repair kit ...................................... 144

R Rain sensor .....................................................50 Rear fog lamp .................................................46 Rearview mirror ..............................................58 Rearview mirror with compass ....................58 Recirculation, A/C .........................................68 Recirculation, ECC ........................................71 Recovery ....................................................... 121 Refrigerant .......................................................66 Refuelling ...................................................... 105 Relay/fuse box ...................................175, 178 Remote control ...............................................92 Remote control functions .............................92 Reverse gear inhibitor ................................ 110 Reverse gear inhibitor, five-speed .......... 109 Rims ............................................................... 138 RME ............................................................... 161 Rustproofing ................................................ 155

S Safety grille ......................................................86 Safety net ........................................................87 Scratches ..................................................... 154 Seat, power seat ............................................79 Seat, seating position ...................................78

Seatbelt reminder .......................................... 15 Seatbelt tensioner ......................................... 16 Seatbelts ...............................................14, 153 Service programme ....................................158 Side airbags ................................................... 22 Side marker lamps ......................................171 SIPS bag system ........................................... 23 Slippery driving conditions ........................104 Spots ..............................................................152 SRS system .................................................... 19 SRS, switch .................................................... 21 Stability system ......................... 44, 117, 118 Start assistance ...........................................123 Starter motor ................................................220 STC ........................................................44, 117 Steering lock ................................................107 Steering wheel adjustment ......................... 53 Stone chips ..................................................154 Storage spaces ............................................. 82 Sunroof ............................................................ 61 Sunscreen, sunroof ....................................... 62 Switches in the centre console .................. 44 Symbols .........................................................118

T Tailgate ..........................................................104 Tank volume ..................................................217 Temperature selector, ECC ........................ 72 Temperature, A/C .......................................... 69 Timer, A/C ....................................................... 69

Timer, ECC ......................................................71 Towbar ................................................126, 128 Towing ........................................................... 121 Trailer ............................................................. 124 Trailer weight ............................................... 211 Trip computer .................................................47 Type designation ......................................... 210 Tyre pressure ............................................... 139 Tyres, designation of dimensions ............ 136 Tyres, direction of rotation ........................ 140 Tyres, driving characteristics .................... 136 Tyres, speed ratings ................................... 136 Tyres, tread wear indicators ..................... 137

U Unlocking .........................................................97

V Vanity mirror ................................................. 174 Vehicle data ................................................. 158 Viscosity ........................................................ 214

W Warning symbol, AIRBAG system .............18 Warning symbols ...................................39, 40 "Warning!" texts ............................................... 2 Warning triangle ......................................... 141 Washer .............................................................50 Washer fluid ................................................. 163

V50 book w446.book Page 225 Thursday, September 9, 2004 10:27 AM

226

Washing the car .......................................... 152 Waxing .......................................................... 153 Weights ......................................................... 211 Wheel nuts ................................................... 138 Wheels, fitting ............................................. 143 Whiplash injury ...............................................25 WHIPS .............................................................25 WHIPS and child seat/booster cushion ...25 Windscreen washer ......................................49 Windscreen wipers .......................................49 Winter tyres .................................................. 137 Wiper ................................................................50 Wiper blades ............................................... 166

V50 book w4

Manualsnet FAQs

If you want to find out how the V50 Volvo works, you can view and download the Volvo V50 2005 Owners Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Volvo V50 as well as other Volvo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Volvo V50. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Volvo V50 2005 Owners Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Volvo V50 2005 Owners Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Volvo V50 2005 Owners Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Volvo V50 2005 Owners Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Volvo V50 2005 Owners Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.