Volvo V70 Road and Traffic Information System 2013 Instruction Manual PDF
Summary of Content for Volvo V70 Road and Traffic Information System 2013 Instruction Manual PDF
ROAD AND TRAFFIC INFORMATION SYSTEM - RTI V40, S60, V60, XC60, V70, XC70
& S80
Road type Colour
Motorway Orange
Primary road Dark grey
Smaller primary road Grey
Ordinary road Light grey
Local road White
Text and symbols on screen
Event at next guidance point
Distance to next guidance point
Name of next road/street
Facility (Restaurant)
Planned route final destination
Symbol for destination/final destination
Calculated arrival time at final destination
Planned route waypoint
Calculated remaining distance to destination
Maximum permitted speed - at car's current position (17) [Not in cars with RSI.]
Compass
Traffic information
Section covered by traffic information
Current road/street name - at car's current position (17)
Next guidance point
Planned route
The car's current position
Stored location
Completed planned route
Planned route start
Map scale
ROAD AND TRAFFIC INFORMATION - RTI Volvo's navigation system is a traffic information and road navigation system developed by Volvo. The system guides you to a destination and gives information along the route. It
informs of situations that can affect the drive, such as accidents, road works and shows alternative routes.
It is possible to create an itinerary, search for facilities along the route, store special places etc. The system displays the car's exact position and in event of a wrong turning always corrects to guide you to the destination.
You will see just how intuitive it is to use. Try it out. In order to get along with the system we recommend that you familiarise yourself with the information in this manual.
By facilitating accessibility and shortening driving distances, Volvo's navigation system contributes to a better environment.
License agreement NAVTEQ DATABASE
For information for the end user - see page 76.
Table of contents
2
01 01 Quick Guide
Quick start................................................... 8
02 02 Get to know your navigation
system
Manual...................................................... 12 Before starting.......................................... 14 Overview................................................... 16 Controls.................................................... 19 Voice recognition...................................... 22 Keyboard................................................... 26 DVD disc, screen...................................... 28 Maps, road types and compass............... 30 Menus....................................................... 32 Menu tree in three levels........................... 34 03
03 Planning your trip
Specify a destination................................ 40 Itinerary..................................................... 47 Current position........................................ 50 Settings..................................................... 51 Simulation................................................. 59
Table of contents
3
04 04 Traffic information
General...................................................... 62 Reading information.................................. 64 Handling traffic problems.......................... 66
05 05 Symbols on the map
Facilities.................................................... 70
06 06 Questions and answers
Frequently asked questions...................... 74 EULA - License agreement....................... 76 Copyright.................................................. 78
Table of contents
4
07 07 Alphabetical Index
Alphabetical Index.................................... 80
Table of contents
5
6
Quick start................................................................................................. 8
QUICK GUIDE
01 Quick Guide
Quick start 01
8
Activating the system
The car's electrical system must first be acti- vated:
1. Press the remote control key into the igni- tion switch and activate key position I (see the owner's manual for the car).
2. If the navigation system does not start within a few seconds - press the centre console's NAV button.
Disclaimer
When the navigation system is started the dis- play screen shows a text which must be con- firmed:
Press the OK button.
For more information, see page 14.
Controls
Volvo's GPS navigator can be operated in sev- eral ways:
With the steering wheel's right-hand key- pad
With the controls in the centre console
With a remote control
With voice recognition.
For a functional description, see page 19.
Main commands
The steering wheel keypad is used in the fol- lowing two examples to give guidance to an Address or Facility.
Scroll/select in the menus with the Thumb-
wheel (1).
Activate selections with a brief press on the Thumbwheel (abbreviated in the fol- lowing example with "+ OK".
Go back in menus and/or undo using EXIT (2).
Centre console controls
If the centre console keypad is used instead of the steering wheel keypad then the following applies:
Keypad in steer- ing wheel
Centre console
Turn the Thumb-
wheel
Turn TUNE
Press the Thumb-
wheel
Press OK
Press EXIT Press EXIT
Guidance to a street address
Display screen/ menu
Action
If the display screen does not show a map image, proceed as follows:
Press the centre console button NAV.
Map Press NAV to dis- play the "Shortcuts" menu.
Shortcut menu, see page 32.
Select Set address
+ OK.
Set destination Select Address + OK.
Address: Select City: + OK.
01 Quick Guide
Quick start 01
9
Display screen/ menu
Action
Daisy wheel - see page 26.
Turn the Thumb-
wheel to select characters and enter it by clicking OK - a list of options emerges on the dis- play screen.
Daisy wheel Select the appropri- ate district from the list + OK.
Navigation menu Select Set single
destination + OK.
Map Guidance starts - follow the instruc- tions.
The navigation system calculates the route, travel time and distance to the selected desti- nation. The system provides guidance and instructions on junctions etc.
If there is a deviation from the planned route outline during the journey then the system automatically calculates a new route outline.
Guidance to a facility (POI)
Display screen/ menu
Action
If the display screen does not show a map image, proceed as follows:
Press the centre console button NAV.
Map Press NAV to bring up a menu.
Shortcut menu, see page 32.
Select Set Point Of
Interest + OK.
Set destination Select Point of
interest (POI) + OK.
Point of interest
(POI)
Select e.g. Near the
car + OK.
Latest 5 POI types Select e.g. All
types + OK.
All POI types Select e.g. Airport + OK.
Results list Select the desired option from the list + OK.
Display screen/ menu
Action
Navigation menu Select Set single
destination + OK.
Map Guidance starts - follow the instruc- tions.
10
Manual.................................................................................................... 12 Before starting........................................................................................ 14 Overview................................................................................................. 16 Controls................................................................................................... 19 Voice recognition.................................................................................... 22 Keyboard................................................................................................. 26 DVD disc, screen.................................................................................... 28 Maps, road types and compass............................................................. 30 Menus..................................................................................................... 32 Menu tree in three levels......................................................................... 34
GET TO KNOW YOUR NAVIGATION SYSTEM
02 Get to know your navigation system
Manual
02
12
Heading level 1
Heading level 2
The content under this heading is part of Head- ing level 1.
Heading level 3
The content under this heading is part of Head- ing level 2.
Heading level 4
The content under this heading is part of Head- ing level 3.
General information on the manual
There is a quick guide for the user who wants to get started right away - see page 8.
For a more in-depth description of the opera- tion and options as well as the selection of set- tings to the destination, the recommendation is to read the manual in combination with practi- cal use.
Menu options/Search paths
All options that can be selected on the display screen are marked in this manual with slightly larger and grey-shaded text, e.g. Set
destination.
Search paths in the menu tree are stated as e.g.:
Set destination Address City:
English text
The manual's images are common to all mar- kets and languages so where they contain text it is mainly in English.
In order to facilitate the user's understanding of the images and their menu options with search paths connected to the manual's text, the English word for the image is in brackets immediately after the intended text/phrase in the language of the manual:
Set destination Address
(Set destination > Address)1
Special text
NOTE
NOTE
Texts marked with NOTE provide advice or tips to facilitate use of e.g. features and functions.
Footnote
There is information in the manual that is added as a footnote at the bottom of the page or in direct association with a table. This information
1 Not in English manuals - but shown here as an example.
02 Get to know your navigation system
Manual
02
13
is a supplement to the text to which it refers via the footnote number/letter.
Options
All types of options/accessories are marked with an asterisk (*).
In addition to standard equipment, this manual also describes options (factory fitted equip- ment) and certain accessories (retrofitted extra equipment).
The equipment described in this owner's man- ual is not available in all cars - they have dif- ferent equipment depending on adaptations for the needs of different markets and national or local laws and regulations.
In the event of uncertainty over what is stand- ard or an option/accessory - contact a Volvo dealer.
Changes in the manual
The specifications, design features and illus- trations in this owner's manual are not binding.
We reserve the right to make modifications without prior notice.
Volvo Car Corporation
02 Get to know your navigation system
Before starting
02
14
General
The Volvo navigation system uses reference system WGS84, which gives longitude and lat- itude positions.
The car's navigation system can be used with- out a destination being selected.
Map position
Upon start-up, the navigation system shows an on-screen text message, which must be con- firmed by pressing the OK/MENU button. The text is as follows:
This system provides route information
to help you reach your destination. Due
to road conditions, some
recommendations may not be
accurate. Obey all traffic laws and drive
based on your own good judgement.
Always concentrate on your driving by
keeping your eyes and mind on the
road.
Then a map of the current geographic area is shown where the car is symbolised by a blue triangle.
Settings
The system is supplied with default settings, but starts with the settings last used.
There is a function that resets all settings to default settings simultaneously, see page 58.
On/Off
On
1. Push the remote control key into the igni- tion switch.
2. The screen activates automatically in the key position I (see the car's manual).
3. Press the centre console's button NAV if the navigation system does not start auto- matically.
4. Press OK when the "Start up" text appears on-screen, see previous section "Map mode".
The system may need a few seconds in order to detect the position and movement of the car.
Off
The navigation system is shut down when the remote control key is removed from the ignition switch.
The Navigator cannot be switched off man- ually, but always works in the background after
the "Start up" sequence. If the navigation sys- tem is not to be switched on:
Press EXIT at the "Start up" sequence, see section "Map mode".
NOTE
The navigation system is also available when the engine is switched off. When the battery level gets too low the system switches off.
Demo (simulated guidance)
To see how the system works, guidance to an indicated destination can be simulated on- screen - see page 59.
02 Get to know your navigation system
Before starting
02
15
02 Get to know your navigation system
Overview
02
16
NOTE: The picture is schematic - some details may vary depending on car model and market.
02 Get to know your navigation system
Overview
02
17
Antenna for GPS
The antenna is integrated into the roof antenna.
Voice recognition
Some procedures in the Navigation system can also be voice controlled. The microphone (2a) is fitted in the ceiling and the activation button (2b) is located on the right-hand keypad on the steering wheel. For more information, see page 22.
Main unit
The main unit is fitted in and behind the centre console and includes the following functions:
Calculating the position of the car
Calculating the route to the specified des- tination
Handling traffic information
Voice guidance
DVD player
Receiver for GPS and traffic information (TMC1) is integrated into the main unit.
Positioning
The car's speed sensor and a gyro calculate the current position and the direction of travel
of the car using signals from the GPS satellite system.
The advantage of this concept is that the Nav- igation system registers and calculates the route outline even if the GPS signal is tempo- rarily lost, e.g. when driving through a tunnel.
Traffic information
TMC1 is a standardised coding system for traf- fic information. The receiver automatically searches for the correct frequency. Reception takes place via the FM antenna.
NOTE
TMC is not available in all areas/countries. The system's coverage area is under con- stant construction and updating may some- times be necessary.
For information about updating map data and software, see page 28.
Screen
The screen displays maps and provides detailed information on route type, distance, menus etc. For information screen care, see page 29.
Keypad, centre console
As an alternative to the steering wheel keypad, the centre console's numeric keypad can be used in combination with buttons OK/MENU, TUNE and EXIT to scroll between different menu options, confirm options or go back in menus, see page 19.
Volume control and IR receiver
Use the audio unit's volume control during ongoing voice messages to adjust the volume, see page 31. The volume can also be adjusted in the menu system.
Point the remote control towards the centre console during use - its IR receiver is located there.
1 Traffic Message Channel
02 Get to know your navigation system
Overview
02
18
Keypad, steering wheel
A keypad is located on the right-hand side of the steering wheel. Use it to scroll between dif- ferent menu options, to confirm selections or to move back in menus, see page 19.
Speakers
Navigation system audio uses the front loud- speakers.
02 Get to know your navigation system
Controls
02
* Option/accessory, for more information, see Introduction. 19
General information about controls
The navigation system is operated by controls on the centre console, the steering wheel key- pad or using a remote control*. The three dif- ferent control unit keypads have common functions but differ in appearance and opera- tion. The design may also vary depending on market.
The system can also be controlled by voice recognition using specific commands - see page 22.
Centre console
Centre console keypad.
NAV activates the GPS navigator on the display screen. With GPS activated, a quick menu opens/closes, see page 32.
Numerical keys enter information for address and name search, and scroll on the map, see pages 26 and 33.
Press OK/MENU once to confirm or acti- vate a selection. Described in this manual with the "OK button" or "+ OK".
Turning TUNE scrolls between different menu options or zooms when the map image is shown. Described in this manual with the "TUNE knob".
Press EXIT once to go back in the menu structure or undo a selection.
Steering wheel
The steering wheel's keypad is available in sev- eral versions depending on market and selec- tion of audio system.
Steering wheel right-hand keypad.
Turn the thumbwheel to scroll between dif- ferent menu options or zoom when the map image is shown.
Press the thumbwheel to confirm/activate a selection.
EXIT goes back in the menu structure or undoes a selection.
02 Get to know your navigation system
Controls
02
20
Voice recognition
See page 22.
Remote control
The remote control can be used to control/ operate several different functions in the car - only the related navigation system is described here.
Point the remote control at the centre con- sole during use.
Remote control keypad.
NAV activates the GPS navigator on the display screen. With GPS activated, a quick menu opens/closes, see page 32
EXIT goes back in the menu structure or undoes a selection.
OK/MENU confirms or activates a selec- tion. Described in this manual with the "OK button" or "+ OK".
Arrow keys move the menu cursor.
Numerical keys enter data for address and name search, and scroll on the map.
NOTE
If the remote control does not work, try replacing with new AA/LR6 batteries first of all.
WARNING
Store the remote control and other similar objects in one of the storage compartments - in event of hard braking and/or collision such objects can cause personal injury or other damage.
Additional information
02 Get to know your navigation system
Controls
02
21
Sometimes there is more information available than can fit on the menu bar - the line then ends with the character: "#".
To view the rest of the information:
Press the INFO button.
02 Get to know your navigation system
Voice recognition
02
22
General about Voice control
Voice control means that certain functions in the navigation system can be activated by the spoken word.
The Voice commands offer comfort and help the driver to avoid distraction - instead the driver can concentrate on driving and focus attention on the road and traffic situation.
WARNING
The driver always holds overall responsibil- ity for driving the vehicle in a safe manner and complying with all applicable rules of the road.
The Voice control uses the common micro- phone of the hands-free system - the driver receives responses to the Voice control through the vehicle's loud speakers.
The microphone is positioned in the ceiling in front of the driver for optimal take-up of the driver's speech - it can however be disturbed by/pick up loud voices from passengers.
Handling
Keypad in steering wheel.
Button for voice control
Activate the system
One short press on the steering wheel but- ton (1) activates the system - it is then ready to accept a command.
Think of the following when using the Voice control system:
For commands - Speak after the tone with a normal voice at a normal tempo
The car's doors, windows and sunroof must be closed
Avoid background noise in the passenger compartment.
NOTE
If unsure of which command to use the driver can say "Help" - the system then responds with several different commands that can be used in the relevant situation.
The voice command can be interrupted by:
not speaking
saying "Cancel"
holding the steering wheel button for voice control for a couple of seconds
press EXIT
press one of the centre console buttons NAV, RADIO, MEDIA, MY CAR or CAM.
Use the voice command
Entering information in the navigation system using the voice command is very simple because the screen lists the frequently occur- ring commands to be used in the relevant sit- uation.
Start
A voice command is started as follows:
02 Get to know your navigation system
Voice recognition
02
23
1. Press the steering wheel button for Voice control - the display lists examples of pos- sible commands.
2. Select "Navigation" for example and state the word clearly and in normal conversa- tional tone.
3. The screen shifts to the option "Repeat
instruction/Navigation go to address/ Itinerary" - Select and say "Itinerary".
4. Etc....
Note that greyed out text and text in brackets is not included in the spoken command.
NOTE
For various reasons, it is not possible to select all menus and options that are visible on the screen:
Selectable - menu lines/options are clear and white.
Not selectable - menu lines/options are matt and grey.
The command can be given in several
ways
The command "Navigation go to address" can be stated as:
"Navigation > Go to > Address" - Say "Navigation", wait for the system response in the form of suitable on-screen
options. Continue by saying, for example, "Go to" and conclude with "Address".
or
Say the whole command in one sequence - "Navigation go to address".
Tips
Some good advice:
Give a command by first pressing the voice button and then speaking naturally after the tone.
To respond to the Voice control system - speak after the tone at the end of the ques- tion.
To interrupt a voice session - hold the voice button in.
The driver can obtain help during a dia- logue by saying "Help" after a listening tone.
The dialogue with the system can be spee- ded up - Interrupt the system's speech with a short press on the button's voice button, wait for a tone and then start talk- ing.
If the driver is concentrating on driving, there is no need to make an immediate response to the question.
The system asks for an action a maximum of three times - if the driver does not respond the dialogue is ended.
Avoid speaking while the system is responding - the system is not disturbed by this but the driver may miss information stated by the system
Example
Here are some normal commands:
Navigation go to address
Navigation go to POI
Navigation delete next waypoint
Navigation cancel guidance.
NOTE
A complete list of quick commands is in MY
CAR-menu - Go to Settings Voice
settings Voice command list
Navigation commands.
Help functions and settings
In the menu systemMY CAR there are pro- grams where the driver can practice the differ- ent functions in the Voice control system. To describe the menu system MY CAR - see the car's normal instruction manual.
The better the driver knows the Voice control system, the more comfortable the driver will be using the functions. Practicing using the inte-
02 Get to know your navigation system
Voice recognition
02
24
grated practice programs is therefore recom- mended.
NOTE
The practice programs are only accessible when the car is stationary with the hand- brake applied.
Introduction to voice control
The program Voice tutorial gives the driver step by step instructions in the use of the Voice control system and is a simple way of becom- ing familiar with the methods of giving the com- mands.
The program can be started in two ways:
Press the steering wheel button for voice control and say "Voice tutorial".
or
Activate the program in MY CAR - Go to Settings Voice settings Voice
tutorial.
Voice training
The program Voice training teaches the Voice control system to recognise the driver's voice and speech pattern. It is also possible to create a second user profile - an advantage if more than one person is likely to use the car/system regularly.
The voice training is started in MY CAR - Go to Settings Voice settings Voice
training User 1 or User 2.
NOTE
The menu option Default setting can be changed to User 1 first after a lesson in Voice training has been completed.
More settings in MY CAR
User profile - 2 x different user profiles can be set. Go to Settings Voice settings
Voice user setting. Tick one of the options Default setting, User 1 or User
2.
Voice volume - Go to Settings Voice
settings Voice output volume and select the desired level.
The system's voice volume can also be adjusted using the centre console TUNE knob when the system is speaking.
Language
The voice control system is under constant development and at time of printing the follow- ing languages were available:
English (UK)
English (US)
French (CAN)
French (FRA)
Dutch
Italian
Spanish (EU)
Spanish (US)
Swedish
German
NOTE
Voice recognition GPS navigation is only available in the countries listed here. Loca- tion names and address records have not been loaded for other languages/markets.
To change the language - Go to Settings
System options Language and select.
The languages that are included in the Voice control system have this icon in the language list.
Language dependent user profile
The voice control system only understands the language set in System options.
Say that user profile User 1 is stored by a Swedish speaking driver with the system set in Swedish. If the driver changes the car language to English the user profile User 1 will no longer be selectable because the system now only
02 Get to know your navigation system
Voice recognition
02
25
understands, and expects English speech - instead the option Default setting becomes active.
To improve the system's understanding of the driver's English speech the solution is to teach and store the driver's English speech in User
2 with the system set to English (to have both variants available) or to replace the Swedish language profile in User 1 with an English pro- file.
02 Get to know your navigation system
Keyboard
02
26
Entering and selecting options
Screen view with text field or optional text.
This navigation system uses a "daisy wheel" to enter specific information, e.g. type of facility, place/town, area/country, address, street or post code.
Activate an option
After marking a desired function/menu bar using the thumb wheel or the TUNE knob, press the thumb wheel/OK to see the next level of functions/options.
Enter as follows
The daisy wheel.
1. Mark a text field. 2. Press OK to call up the "daisy wheel". 3. Select the characters using the thumb
wheelTUNE knob and enter them by pressing thumb wheelOK.
Numerical keyboard
Another way of entering characters is using the centre console's buttons 0-9, * and #.
When 9 is pressed, a bar appears with all char- acters1 under the buttons, e.g. W, x, y, z and 9. Quick press the move/"loop" cursor through these characters.
Stop using the cursor on the desired char- acter to select it - the character is shown on the enter line.
Delete/change using EXIT.
More options
NOTE
Muted characters cannot be selected in combination with the relevant entered char- acters.
In the daisy wheel's inset menu there are fur- ther options that have more characters and digits:
More (More) + OK - alternative characters appear in the wheel.
123 + OK - digits appear in the wheel.
=> + OK - the cursor moves to the list on the right-hand side of the screen where selections using OK can be made.
Last 5 (Last 5) + OK - lists the most recent searches. Mark one of them + OK.
1 The character for each button may vary depending on market/state/language.
02 Get to know your navigation system
Keyboard
02
27
List of options
List that matches entered characters.
The digit 5 in the screen's top right-hand corner indicates that the list contains 5 possible options that match the entered letters BEZ.
No list
An empty list and the characters *** in the upper right-hand corner's digit window, mean that the available options with current entered characters are more than 1000 - when the amount is less, the current options are shown automatically.
To reduce the number of options in the list:
Enter more characters on the text line.
02 Get to know your navigation system
DVD disc, screen
02
28
DVD contents
DVDs with updated map data and related enhanced information are being developed continually. Contact a Volvo dealer for infor- mation on the latest issue.
NOTE
Map data does not have 100 percent cov- erage in all areas/countries.
The system's coverage area is under con- stant construction and updating may some- times be necessary.
See also www.volvocars.com/navi for further information on maps etc.
Map areas
The car's map system varies depending on market. The following main maps are available:
Australia & New Zealand (Pacific)
Europe
Hong Kong
Japan
China
Middle East
North America
Russia
South Africa
South America
Southeast Asia
Turkey.
Should you need to modify the navigation sys- tem's map area - contact a Volvo dealer for information on how to proceed.
Updating the map data
When updating, DVDs are used to transfer new information to your car's navigation system. This is done using the car's regular DVD player.
NOTE
A number of the Infotainment functions are disabled or reduced during updat- ing.
Before an update begins - read through the instructions first.
In the event of any questions about updating - contact a Volvo dealer.
License code
To be able to activate an update, a licence code has to be entered first. This code can be found on the Internet.
1. Open the website1 "Activate your naviga- tion system".
2. Enter your car's VIN number and the owner's e-mail address in the relevant entry fields, then click to close the website.
3. Note the licence code which is then dis- played on screen. This licence code is also sent to the specified e-mail address.
Updating
How to update the navigation system:
1. Start the engine. 2. Insert the first disc in the DVD player and
follow the instructions on screen. An update is often distributed on several discs2 - insert the discs in the logical/ numerical order.
1 The Internet address from which the licence code is generated comes with the update DVDs. 2 The number of discs depends on the market.
02 Get to know your navigation system
DVD disc, screen
02
29
3. The screen shows New software
found - start the update by pressing OK. (Cancel by pressing EXIT).
4. The screen shows Please enter licence
code: - input the licence code using the numeric keypad, see page 19.
5. Follow the instructions on screen, which continuously show the progress of the update and the approximate time remain- ing.
The update has to be enabled once all DVDs have been loaded. This is done by switching off the engine and waiting 5 minutes before restarting. The update is then complete and the navigation system can be used again.
NOTE
Updating of map data can in some cases also introduce new functions to the system, which are not described in this manual.
Continue an interrupted update
If the update is not complete when the engine is switched off, the process continues from where it left off the next time you start the engine. Proceed as follows to restart an inter- rupted update:
If the disc is inserted into the DVD player: Start the engine - the update is resumed automatically. Follow the instructions on screen.
If the disc is removed: Start the engine and insert the disc into the DVD player - the update is resumed automatically. Follow the instructions on screen.
Care of DVD discs
Handle DVD discs with care.
When they are not in use they must be stored in their packaging. Avoid storing them in damp, high temperature, direct sunlight or dusty sur- roundings.
Screen care
Clean the screen with a soft, lint-free rag, lightly moistened with a mild window cleaning agent.
IMPORTANT
Do not place any objects in front of the GPS navigator's display screen - the surface could then be scratched. Mobile phones can also interfere with the display screen's function.
02 Get to know your navigation system
Maps, road types and compass
02
30
NOTE: The images are schematic - some details may vary depending on software version and market.
02 Get to know your navigation system
Maps, road types and compass
02
31
Map image of current position
The appearance of the screen image depends on geographic position and the settings made, e.g. map scale, facilities selected for display etc.
Explanations for the text, signs and symbols that may appear on the display are available on the front of the cover.
POIs along the motorway - see page 42.
Detailed junction map - the left-hand sec- tion of the display screen shows a detailed enlargement of the next junction1. The sit- uation is always supplemented with a voice message, see next section.
Two maps can be selected as display mode. The screen shows the same map image but in two different scales. 2D or 3D display can also be selected - see page 53.
Scroll mode - see page 33.
Voice guidance
After a destination has been entered and the car approaches a junction or exit, a voice mes- sage sounds stating distance and type of the next manoeuvre. At the same time a detailed map of the junction is displayed. The voice guidance message is repeated closer to the junction.
The volume can be adjusted with the audio unit's volume button (during ongoing voice message).
To repeat a message:
Press twice on the OK button.
Also see Settings Guidance options
Voice guidance - see page 55.
NOTE
There is no voice guidance during a current call with a Bluetooth-connected mobile phone.
To select male or female voice and language:
Go to the menu system in MY CAR - see the car's manual. The voice volume can also be adjusted there.
Compass
The red tip of the compass needle points north and the white end points south.
Go to Settings Map options Compass
to select a different view or so that the com- pass is not shown - see page 54.
1 This function can be expanded - see page 56.
02 Get to know your navigation system
Menus
02
32
Menu system
All menus and options are presented in the rel- evant section of the manual.
NOTE
For various reasons, it is not possible to select all menus and options that are visible on the screen:
Selectable - menu lines/options are clear and white.
Not selectable - menu lines/options are matt and grey.
Shortcuts
After pressing the NAV button to start the nav- igation system there is a menu of shortcuts to the most frequently used functions, the first menu that meets the user after the next press the NAV button.
The shortcuts are:
Set address - see also page 40.
Set Point Of Interest - see also page 41.
Previous destinations - see also page 44.
Traffic events on route - see also page 66.
Cancel guidance - deletes the current itinerary. There is also the option Pause
guidance, see page 33.
To the shortcuts from map mode
Press the NAV button.
Main menu
The main menu is located at the top of the nav- igation system's menu tree.
To the main menu from map mode
Press the OK MENU button.
To the main menu from another menu
Press NAV and then OK MENU.
or
Press EXIT repeatedly until it is shown.
Back to the Main menu
Regardless of where the user is in the menu structure, the Main menu can always be accessed by pressing once or more on the EXIT button.
Back to the map
There is an easy way to quickly bring up the map on the screen again, no matter how deep into the menu system the user is:
Hold in EXIT for a few seconds.
02 Get to know your navigation system
Menus
02
33
Scroll menu
In Scroll mode a crosshair is moved over the map image with the centre console's numerical keys.
Activating Scroll mode in normal map
mode
Press one of the numerical keys 0-9.
Scrolling
Press one of the numerical digit keys 1-2-3-4-6-7-8-9 - a directional arrow is shown in the margins combined with the number that will be used to scroll the map in the desired direction.
Zooming out/in
Turn the TUNE knob.
Exiting from Scroll mode
Press EXIT.
Crosshair
Press OK MENU once to show a menu for the point on the map, which the centre of the crosshair points to:
Set single destination - Deletes any pre- vious destinations in the itinerary, and starts guidance on the map.
Add waypoint - Adds the selected point to the itinerary.
POIs nearby - Allows you to search/view available facilities around the selected location.
Read traffic message - Allows you to view traffic messages1 around the selected location.
Information - Shows information available about the selected location.
Store location - Allows you to store the selected location in the memory. (Opens the menu Set destination Stored
location Edit - see page 44).
Pause guidance
Pause guidance
With the cursor on Pause guidance + OK
MENU the guidance can be switched off tem- porarily after which neither visual nor acoustic guidance is given - at the same time the menu- bar changes to Resume guidance. However, the system's car symbol continues to show the car's actual position on the map.
Resuming guidance
Select Resume guidance + OK MENU.
1 The service is not available for all areas/markets/states.
02 Get to know your navigation system
Menu tree in three levels
02
34
Shown here are three of the menu tree's levels. Several of the menus at level 3 have further submenus - these are described in more detail in each respective section.
The menus are structured as follows:
Menu level 1
Menu level 2
Menu level 3
Menu level 4
p. x
Menus and functions
Repeat voice guidance page 31
Set destination page 40
Address
Area:
City:
Street:
Number:
Junction:
Set single destination
Add as waypoint
Information
page 40
Point of interest (POI)
By name
Near the car
Along the route
Around point on map
Along the street
Along the motorway
MyPOI near the car
MyPOI around point on map
page 41
Stored location
Set single destination
Add as waypoint
Information
Edit
Sort by
Delete
page 43
Previous destination
Set single destination
Add as waypoint
Information
Store
Delete
Delete all
page 44
Return trip
Start guidance
Add as waypoint
Edit itinerary
page 45
Select point on map page 45
02 Get to know your navigation system
Menu tree in three levels
02
35
Latitude & longitude page 45
Postcode page 46
Route details page 47
Itinerary
Start guidance
Add another waypoint
Edit itinerary
page 47
Avoid page 48
Next destination page 48
Route instructions page 49
Map of entire route page 49
Map of remaining route page 49
Start demo
or
Stop demo
page 59
Traffic informationA page 62
Read traffic message page 64
Traffic events on route
or
Traffic events ahead
page 66
Avoided traffic events page 66
Current position page 50
Settings page 51
Traffic informationA
Traffic message
page 51
Route options
Route type
Route proposals
Customise route
Route learning
Reset route learning
page 51
Map options
Map colours
Show dual map mode
Single map settings
Right map settings
Left map settings
POI on map
Show full-screen map
POI on map
Compass
Show current road name
Show speed limitsB
page 53
02 Get to know your navigation system
Menu tree in three levels
02
36 * Option/accessory, for more information, see Introduction.
Guidance options
Voice guidance
Voice output volume
Street names in voice guidance
Turn-by-turn navigation *
Time of arrival format
Always show intersec- tion map
MyPOI Alert
page 55
System information
GPS information
Map version:
Map loading progress
page 56
Import/edit MyPOI page 57
Reset navigation settings page 58
Delete all user data page 58
Pause guidance
or
Resume guidance
page 33
A Not available in all areas/markets/states. B Not in cars with Road Sign Information (RSI Road Sign
Information).
02 Get to know your navigation system
02
37
38
Specify a destination............................................................................... 40 Itinerary................................................................................................... 47 Current position...................................................................................... 50 Settings................................................................................................... 51 Simulation............................................................................................... 59
PLANNING YOUR TRIP
03 Planning your trip
Specify a destination
03
40
Address
Set destination Address
There are several different ways to program a destination.
It is sufficient to simply specify a district/city and start the journey - it leads to the centre of the district/city.
If a destination's latitude and longitude are known then these can be entered.
See page 26 for information on how characters are written/entered into the system's various text fields.
NOTE
The definition of city or area can vary from country to country, and also within the same country. In some cases a metropolitan area is indicated - in others an individual suburb.
City or street
The cursor first rests on Street.
How to search and locate a destination:
1. With the previous image view on the dis- play screen - Press OK to activate the pre- set text box.
2. Enter the street's name Street: with the "daisy wheel" (see page 26) and then select a desired City:.
3. Or City: + OK and start by entering it.
The following search criteria can be used:
Area: - Enter a country.
City: - Enter a district/city.
Postcode: - Under City: the search can also be made using a post code.
Street: - Enter the street address.
Number: - Select one of the street's house numbers.
Junction: - Select a destination based on where the two streets/roads intersect.
Set single destination - Deletes any des- tinations in the itinerary and starts guid- ance to the current destination.
Add as waypoint - Select + OK to add the address to the itinerary.
Information - Select + OK to view infor- mation about the selected destination.
03 Planning your trip
Specify a destination
03
41
More about Information
Select an address/street + OK - then the fol- lowing can be selected:
Map - Shows where on the map the loca- tion can be found - sometimes with addi- tional information.
Call1 - Calls the facility if a telephone num- ber is given.
Related POI - Lists the facilities associ- ated with the current/selected facility.
Parking nearby - Lists parking where appropriate around the selected location, with distance.
Facilities
Set destination Point of interest (POI)
The system contains a large number of search- able facilities which can be specified as desti- nations. The list of desired facilities can be shortened by specifying which facility/facilities the current search relates to:
Select Type: and specify which facilities should be covered by the search (it is the same approach as described on page 54).
To select which facilities should be perma- nently visible on the map, go to the menu Settings POI on map - see page 54.
All searches are made in the manner described in the previous section City or street:
1. Specify Area:/City:/Type:/Name:. 2. Then select Set single destination, Add
as waypoint or Information + OK.
With name
By name
In addition to searching with main group, such as Restaurant, the company name of the facility can also be used, e.g. "Peppes Bod- ega". The procedure is the same as when searching with Address, see page 40.
When searching with Name: with e.g. "London Airport", all combinations with "London" will be shown when "Lo" is entered. The more letters you input the more specific the reply.
A search with "Lo" also produces reply alter- natives such as "Restaurant Lou Trivalou" for
1 Requires connected mobile phone.
03 Planning your trip
Specify a destination
03
42
example, as alternatives containing several words separated by spaces are also included in the search.
NOTE
There are subcategories for restaurants in order to simplify the search.
Around the car
Near the car
Search of facility refers to the area around the car's current position.
Along the route
Along the route
Search of facility refers to the area along the set itinerary.
Around point on map
Around point on map
Search of facility is made with the Scroll func- tion's crosshair - see page 33.
The scroll map is shown - place the cross- hair on the desired location + OK
Along the street
Along the street
Search of facility refers to the area along a spe- cific street/road.
Along the motorway
Along the motorway
This search lists the facilities easy to reach from the motorway, e.g. service stations along the motorway or at the exits.
NOTE
The car must be on the motorway in ques- tion for the list to be available for presenta- tion.
03 Planning your trip
Specify a destination
03
43
My POI around the car
MyPOI near the car
This function allows facilities that the user has entered into the system - My POI2 - to be searched for in the area around the car's cur- rent position. The search is made within a radius of approx. 32 km.
NOTE
My POI icons are shown on the map from and including scale "1.0 km" and lower.
My POI around point on map
MyPOI around point on map
Facilities that the user has entered into the sys- tem - My POI2 - are searched for here around the cursor position on the map. The search is made within a radius of approx. 32 km.
The search is made with the Scroll function's crosshair - see page 33.
The scroll map is shown - position the crosshair on the desired My POI + OK
Stored location
Set destination Stored location
The driver can store a large number of his/her own locations in the system. They can then be used to quickly draw up/supplement an itiner- ary.
Storing a location
To store a chosen location:
1. Use the Scroll function (see page 33) and select the location to be stored.
2. Press OK to display the "crosshair" menu. 3. Select Store location + OK - now the
location is stored and is included in the list Stored location.
2 For information about how individual facilities (My POI) can be added to the map database - see page 57.
03 Planning your trip
Specify a destination
03
44
Mark a stored location in the list + OK and choose between the following options/head- ings:
Set single destination
Set single destination
This option deletes any previous destinations in the itinerary, and starts guidance on the map.
Add waypoint
Add as waypoint
Opens the same window as for Set
destination Address Add as waypoint - see page 47.
Information
Information
Opens the same window as for Set
destination Address Add as waypoint
Information - see page 41.
Edit
Edit
Opens selected "Stored location" and allows you to change/update the following:
Name - Enter a name for the location.
Icon - Select the symbol to represent the current location.
Address - Opens the map to adjust the location's geographical position.
Phone: - Enter a telephone number.
Edit voice tag - Record own sound3. Fol- low the on-screen instructions.
Show name on map - Untick if the loca- tion name is not to be displayed on the map.
Store - Save changes with OK.
Sort by
Sort by
Select whether stored locations are to be sor- ted by:
Name
Icon
Distance
Chronological
Clear
Delete
Delete a marked stored location.
Previous destinations
Set destination Previous destination
3 Only in combination with audio system "High Performance" or "Premium".
03 Planning your trip
Specify a destination
03
45
Previously used destinations are stored here. Mark one of them and then select between:
Set single destination
Add as waypoint
Information
Store - see more about this option after the next image.
Delete
Delete all.
The Store option presents this Edit menu.
The Store menu option leads to the same Edit menu as for Stored location Edit.
For more information - see page 43.
To add/change information for a destina- tion - Select Store + OK.
Return trip
Return trip
Goes back to the itinerary starting point. Can be selected anywhere/anytime in the itinerary.
Search via point on map
Set destination Select point on map
Shows maps with current location pointed out by a cursor.
Turn TUNE to change the scale. 1. Move the crosshair using the centre con-
sole's numerical keys: [6 MNO] moves to the right, [8 TUV] moves down, etc. - see page 33.
2. When the desired location has been found - Press OK.
Search via Latitude/Longitude
Set destination Latitude & longitude
Select destination with GPS coordinates:
1. Place the cursor on the character to be changed and press OK - the character win- dow becomes "active".
2. Enter a digit using the centre console's numerical keys (or turn TUNE) - finish with OK or place the cursor on the next char- acter - the previous character window becomes "deactivated".
3. Move the cursor to the next character loca- tion to be changed and repeat.
4. With the cursor in both windows to the far right, (or turn TUNE) the letters for the car-
03 Planning your trip
Specify a destination
03
46
dinal points - N = 6, S = 7, W = 9 and E = 3 are entered.
5. When both coordinates are entered - select Add as waypoint + OK to add the location to the itinerary.
Add to itinerary
Add as waypoint
Add the location of the selected coordinates on the map to the itinerary.
Information
Information
Shows information available about the loca- tion.
Post code
Postcode
Search destination by post code:
1. Select Postcode: + OK to display the "daisy wheel".
2. Select characters with the TUNE knob and type/enter them by pressing OK. (Or type/ enter characters using the centre con- sole's numerical keys - see page 26).
NOTE
Presentations of post codes may differ between different markets/areas.
03 Planning your trip
Itinerary
03
47
Menu overview
Route details
The system handles one itinerary at a time with a maximum of 8 intermediate destinations.
The first specified destination is the journey's Final destination - subsequent input destina- tions are Intermediate destinations.
NOTE
The most recently added destination is always Way point-1 - previous Way points are increased a step: "Old" Waypoint-1 becomes Waypoint-2, etc.
If a new order is required - Go to Route
details Itinerary, Mark a way point and Move in list.
Enter an itinerary
Route details Itinerary
Draw up an itinerary with several stops to avoid entering destination after destination during your trip.
One final destination with up to 8 intermediate destinations can be specified.
Start guidance
Results with "Route proposal 3" ticked.
Cursor on Start guidance + OK activates cur- rent itinerary.
If the display of 3 alternative itineraries is preset then the driver can select one of them, see the menu Settings Route options Route
proposals, page 52.
Add as waypoint
Adds an intermediate destination. Gives the same menu as in "Set destination" - see page 40.
Edit itinerary
Gives the options:
03 Planning your trip
Itinerary
03
48
Clear itinerary - deletes the current itin- erary.
Route options - opens a shortcut to Settings Route options - see page 51.
Intermediate destinations in the itinerary
By selecting intermediate destination + OK
each intermediate destination in the itinerary can be updated.
Information - Full name and address, and Latitude and Longitude. In addition, a facility can be Called up and any Facilities around the location and Car parking in the vicinity can be seen.
Delete - deletes the intermediate destina- tion.
Move in list - changes the order in the itin- erary.
Adjust on map - shows the location on the map with a crosshair. Another location there be scrolled forward and selected with OK, see more about the Scroll function on page 33.
Store - opens the menu Set destination
Stored location Edit - see page see page 44).
Avoid
Route details Avoid
A distance in the itinerary can be deselected here. The alternative distances are calculated from the car's current position. The system then selects another route.
Select the desired option + OK.
Next destination
Route details Next destination
Shows the next intermediate destination's position on the map, name, address, estimated time of arrival and distance there. Also gives the options:
03 Planning your trip
Itinerary
03
49
Delete - deletes the current intermediate destination and shows the next one.
Map - shows the position on the map in the Scroll menu, see page 33.
>> - scrolls to the next intermediate desti- nation in the itinerary, in a loop.
Call - calls up the facility if possible.
Route instructions
Route details Route instructions
The itinerary's waypoints are listed here.
Map of entire route
Route details Map of entire route
The whole itinerary is shown here - scaled down to fit on the display screen.
Otherwise, the same functions as in the Scroll menu, see page 33.
Map of the remaining route
Route details Map of remaining route
Shows screen image similar to the one in the previous section, but here only with the itiner- ary's remaining distance from the car's current position.
Otherwise, the same functions as in the Scroll menu, see page 33.
03 Planning your trip
Current position
03
50
Where am I?
Current position
Displays a map with the car's current position and information on the location, such as name and coordinates.
03 Planning your trip
Settings
03
51
Traffic information
Settings Traffic information
Further settings that affect traffic information can be made, in addition to those described here - see page 66.
Traffic message
Traffic message
Certain traffic message sorting can be done here:
All - all reported traffic disruptions appear.
Most serious - indicates, for example, closed roads due to accidents or other large/long-term disruption.
None - indication of traffic problem off.
NOTE
This setting does not affect the calculation of a route.
Route options
Settings Route options
Route type
Route type
Different types of itinerary can be selected here:
Fast - shortest possible travel time priori- tised
Short - shortest possible route prioritised
Easy - minimum number of junctions and similar traffic systems prioritised.
03 Planning your trip
Settings
03
52
Route proposals
Route proposals
At the command Start guidance there may be several similar suitable options. Select this if the driver should be asked in case there are several options to choose from:
Select 1 if the navigation system is to select the most suitable option.
Select 3 if the driver is to be able to select between the maximum 3 suggestions.
See more information on page 47.
Customise route
Customise route
Here you can deselect certain traffic sugges- tions. Tick to avoid the following element1
along the route:
Avoid motorways
Avoid toll roads
Avoid ferries
Avoid congestion charging zones
Avoid tunnels
Avoid time-restricted roads
Avoid season-restricted roads
Avoid car trains
Avoid unverified roads
Avoid borders
NOTE
If an itinerary is entered when these selections are made, there may be a certain delay after an alternative has been ticked/unticked because the travel plan must be recalculated.
If tunnels, toll roads and motorways are deselected these are avoided to the greatest possible degree and only used if there are no other suitable alternative is available.
Route learning
Route learning
The basic condition is a stored itinerary. If the driver deviates from the itinerary and take a different route to the final destination than the system recommends, the system memorizes the driver's choice.
If the same itinerary is used again 2 times and the driver repeats the route choice, the system will instead show the path that the driver selected.
Ticked window means that a route that is driven 3 times is stored as itinerary instead of the original itinerary.
1 Available options vary depending on market/area/state.
03 Planning your trip
Settings
03
53
Reset route learning
Reset route learning
Erase driving history.
Map options
Settings Map options
Map colours
Map colours
Choose between:
Automatic - a light sensor detects whether it is day or night.
Day (in previous image)
Night
Single map settings
Single map settings
Map orientation - Select Heading or North.
North - the map always shows North at the top of the screen. The car symbol moves in the rel- evant direction on the screen.
Heading - the car symbol is in the centre and always points up on the screen. The map image rotates under the car symbol in relation to how the road bends.
Map view - Select 2D or 3D.
2D - car symbol and map image seen at right angles straight from above.
3D2 - car symbol and map image seen obli- quely from the side/above.
Show dual map mode
Show dual map mode
The screen can display the map of the entire image area or the same map view in 2 different scales on each left and right half.
Select by ticking in the box by Show dual map
mode + OK and EXIT.
2 Only if Map orientation > Heading is selected.
03 Planning your trip
Settings
03
54
Adjust the map scale in dual map mode
To view both maps with different map scales, they can be adjusted individually as follows:
1. Start from map view mode. Turn the TUNE knob to the left and right - one screen half is surrounded by a colour frame.
2. Press OK - selected screen half is now "active".
3. Turn the TUNE knob to adjust the scale. 4. Press OK again - done, the screen half is
"deactivated".
Left map settings
Left map settings
Map orientation - Select Heading or North.
Map view - Select 2D or 3D.
Right map settings
Right map settings
Same as for left map - see previous section.
Show full-screen map
Cursor on Show full-screen map + OK ticks the function that shows the map image across the whole of the display screen. This removes the information fields in the bottom and top of the screen with information on e.g. passenger compartment temperature.
Facility on map
POI on map
Tick the desired option for how many facilities are to be shown on the map:
All - all facilities appear.
None - no facilities appear.
Selected - A menu with all facilities appears: Tick the facilities that you want to appear on the map.
NOTE
If a POI category with many symbols on the map is deselected/switched off, more POIs from other categories can be shown/viewed on the screen.
Possible facilities are listed on page 70.
Compass
Compass
Select the type of compass you want to appear on the map image:
Graphic
Text - compass direction (upwards on the display screen) is indicated by a letter, e.g. N for "North".
None.
See more information about the compass on page 31.
Show current road name
Cursor on Show current road name + OK
ticks the function that shows the name of the street/road where car is located in the lower edge of the display screen.
Show speed limits
03 Planning your trip
Settings
03
55
Cursor on Show speed limits + OK ticks the function that shows a traffic sign with the cur- rent speed limit in the top right-hand corner of the display screen.
Cars with Road Sign Information - RSI
In cars with the function for identifying road signs (Road Sign Information) the current speed limit is only shown on the instrument panel - the option to select the display of the speed limit on the map image is not available in these cars.
See the normal owner's manual for the car for more information on RSI.
Guiding options
Settings Guidance options
Voice guidance
Voice guidance
If you want voice guidance - tick option Voice
guidance. See more information on page 31.
Voice output volume
Voice output volume
The option shows a volume control on the screen that can be used to adjust the Voice guidance volume.
Adjust using the TUNE knob + OK.
See more information on page 17.
Street names in voice guidance3
Cursor on Street names in voice guidance + OK ticks the function that enables voice guid- ance information about distance and direction to be complemented with spoken names of streets and roads.
Navigation with Turn-by-turn4
3 Certain markets and languages. 4 Only V40 with "Digital" instrument panel.
03 Planning your trip
Settings
03
56
Cursor on Turn-by-turn navigation + OK
ticks the function which means that the next manoeuvre in the itinerary, as well as the dis- tance to it, is shown on the instrument panel.
Time of arrival format
Time of arrival format
Select the time to appear on the screen:
ETA - shows the estimated arrival time
RTA - shows the remaining time until arrival.
Show junction map in other program
The navigation system can work in the back- ground while at the same time the display screen shows a different program source, e.g. Radio or Phone.
Cursor on Always show intersection map + OK ticks the function that also shows detailed junction maps on half of the display screen when other sources/programs are in use - see page 31.
Alarm for My POI
Cursor on MyPOI Alert + OK ticks the function that enables a preset warning sound to alert when the car approaches a My POI position - see page 57.
System information
Settings System information
GPS information
GPS information
The screen shows:
Number of received satellites:
Received position
Map-matched position
Altitude:
The geographic name of the current posi- tion.
Map version
Map version:
The screen shows:
Software version:
Map version:
Map market:.
Map download status
Map loading progress
When updating the map database, the pro- gress of the update is shown here. See more information on page 28.
03 Planning your trip
Settings
03
57
Import/Edit My POI
Settings Import/edit MyPOI
Many companies offer POI files on their Inter- net pages. Using this function the user can supplement Volvo's map database with facili- ties from other suppliers.
NOTE
Adding POI files to the map database requires a certain amount of computer knowledge!
File format for POI files and how the files are downloaded from the Internet are determined by the respective manufac- turer/distributor. Consequently there is no standardised process for download- ing the POI files from the Internet - and for this reason this owner's manual does not show an exact step-by-step description.
If you have any questions - contact a Volvo dealer.
In order to show the principle for how to down- load a POI file from the Internet, a simple exam- ple follows here with the fictitious company "Department Store" and its stores:
1. Go to the company's page on the Internet and search for the location with its POI file.
2. Select a POI file with the "gpx" format and download it to the computer - if the format is not available then the POI file must be converted to the gpx format5 after down- loading.
3. Load the POI file "Department Store.gpx" onto a USB memory stick.
4. Then insert the USB memory stick into the car's USB port (under the tunnel console's armrest/hatch) and locate Settings
Import/edit MyPOI in the menu system. 5. Select Import + OK and follow the
onscreen instructions.
When the import is complete, some settings can be made for the new My POI group "Department Store":
the name can be changed
the map image My POI icon can be replaced (if an icon is included in the impor- ted POI file it automatically becomes the default)
one of 3 sounds can be selected (to get a warning when the car approaches the My POI icon - see page 56)
choose whether or not the My POI icon is to be shown on the map.
When all selections have been made, select Store + OK to finish, or a new POI group can be imported/edited.
All facilities added are grouped under the heading "My POI".
5 There are freeware conversion programs available for download from the Internet.
03 Planning your trip
Settings
03
58
NOTE
The type of information permissible for inclusion on the map is stipulated in national legislation. For current information, see www.volvocars.com/navi.
The map database can be complemented with 100 My POI groups or 50 000 My POI locations in GPX 1.1 format.
NOTE
In addition to all the variants of POI files that can be downloaded from the Internet, Volvo can offer supplementary files for certain markets - contact your local Volvo dealer for information on any possible options.
Reset navigation settings
Settings Reset navigation settings
This function resets the system to default set- tings.
The menu option Settings Reset
navigation settings + OK gives a screen image with the question Reset all navigation
settings?, Continue with OK Cancel with
EXIT - press OK to reset the settings to default settings or undo with EXIT.
Erase all user information
Settings Delete all user data
The menu option Settings Delete all user
data+ OK gives a screen image with the ques- tion Do you want to delete all navigation
user data?, Continue with OK Cancel with
EXIT - press OK to delete or undo with EXIT.
The following settings are deleted with OK:
all stored locations
history for Last 5
previous destinations
route learning
changed default settings.
03 Planning your trip
Simulation
03
59
Start demo
Route details Start demo
The journey specified in the itinerary is simula- ted here.
The system shows how the journey to the itin- erary's specified destination will be carried out.
To exit the demo run:
The previous menu option Start demo has switched to Stop demo - Select + OK.
NOTE
A destination must be specified for the dem- onstration to work.
G 00 00 00
60
General.................................................................................................... 62 Reading information................................................................................ 64 Handling traffic problems........................................................................ 66
TRAFFIC INFORMATION
04 Traffic information
General
04
62
Display and reception
Transmitted traffic information is always received and presented - even if no destina- tions are given.
How traffic information should be presented can be set and changed in Settings, see page 51.
The presentation of traffic information also depends on how it is transmitted.
NOTE
Traffic information is not available in all areas/countries.
The transmission range for traffic informa- tion is being increased continuously.
Traffic symbols on the map
Symbol for traffic message/problems.
When there is at least one traffic message along the itinerary route, a TMC symbol1
appears in the map's upper left-hand corner.
The scroll function (see page 33) can be used to scroll through the traffic problem to see its precise position and nature.
Point on map
Traffic problems are marked with arrows, lines and frames:
Traffic with disruption
Traffic with disruptions in both directions
Extent
Marking's colour
Colour of arrows, lines and frames indicates the degree of the disruption:
Black Closed road
Red Stationary traffic
Orange Slow traffic
Yellow General information
Type of traffic disruption
Shown here are examples of map symbols2
that can mark different disruptions in the traffic:
1 Traffic Message Channel 2 Map symbols may vary between different markets/states.
04 Traffic information
General
04
63
Accident
Contraflow
Diversion
Information
Narrow road
Parking information
Congestion
Roadwork
Slippery road
Other hazard
Closed road
Extent
Certain traffic messages also contain informa- tion on the extent of the traffic obstruction.
On all scales up to 5 km - except the traffic message symbol, a line the same colour as the direction arrow is shown along the affected route. The length of the line is corresponds to the extent (distance) of the traffic problem.
Size of area for traffic information
The scale of the map determines how great a quantity of traffic information can be shown - the larger the map area shown on the screen, the more information can be displayed.
04 Traffic information
Reading information
04
64
Message
Examples of, with arrows, selected traffic prob- lems and their extent.
When the crosshair is placed over a traffic problem (indicated by an arrow along the road) you'll see a flashing
frame with a traffic disruption symbol (e.g. slip- pery road) on the map.
To take advantage of the symbol's traffic infor- mation:
Press OK and select Traffic information
+ OK.
Traffic information
Main menu.
Traffic information
Read traffic message
Read traffic message
With the cursor on Read traffic message + OK the following view is shown:
1. Scroll the crosshair to the traffic incident (coloured line/arrow parallel to the affected road section) about which information is required - a road sign with frame starts to flash out on the map.
2. Press OK - Following which, information like this is shown:
Detailed information on the traffic problem is linked to the symbol, and to the extent that
04 Traffic information
Reading information
04
65
information is available the following is also displayed:
duration
restrictions on speed, vehicle width and height
roads affected.
If there are several traffic problems in the crosshair frame, then the problem closest to the centre of the crosshair is shown first after a pressing OK once.
The upper section of the display screen can show e.g. "2/5" which means that the current information is number 2 of a total of 5 mes- sages in the crosshair - the remaining mes- sages can be scrolled to using short presses on OK.
Return to map display with EXIT.
04 Traffic information
Handling traffic problems
04
66
To avoid traffic problems
Traffic problems ahead
Menu bar 2 without itinerary added.
Traffic events ahead
Press OK on Traffic events ahead to list the current traffic problems.
Traffic problems along the route
Menu bar 2 with itinerary added.
Traffic events on route
This is the same menu bar as in the previous section, but with an activated itinerary - the menu bar now instead reads Traffic events on
route. Here the system can be made to guide past the traffic disruption using a different route.
Press OK on the selected menu bar to list the traffic problems along the route:
List with 1 disruption on the itinerary's route.
The driver can avoid traffic problems by allow- ing the system to determine a different route. Proceed as follows:
1. Select/highlight the traffic obstacle to be avoided + OK - the traffic problem is ticked.
2. If several obstacles need to be avoided - tick these too. A maximum of 15 can be selected.
3. Then select Calculate new route + OK.
The system then calculates a route that leads past the ticked traffic disruptions.
To obtain detailed information about a listed traffic problem:
Select/highlight a traffic problem + # INFO - information about the traffic prob- lem is shown.
Avoided traffic problems
Avoided traffic events
Ticked traffic problems from the previous sec- tion are listed here.
04 Traffic information
Handling traffic problems
04
67
List with 1 editable traffic problem.
The following can be performed:
Clear all - unticks all traffic problems.
Select/highlight one of the traffic problems + OK - the traffic problem is unticked.
Select/highlight one of the traffic problems + # INFO - detailed information with map image is shown on the display screen, see example on next page:
Detailed information - return to the menu using EXIT.
Return to map display with EXIT or select Calculate new route + OK - the itinerary is adjusted with regard to the changes made.
68
Facilities.................................................................................................. 70
SYMBOLS ON THE MAP
05 Symbols on the map
Facilities
05
70
Specify which facilities are to be shown on the map or select All or None are to be shown - see page 54.
Pre-ticked facilities are shown on the map.
Settings Map options POI on map
Selected
Proceed as follows:
Select/mark facility with the TUNE knob - tick/untick using OK and close with EXIT.
To avoid making the map image difficult to read, the number of facilities that can be viewed simultaneously on the screen is limited - zooming into an area provides an opportunity to view several facilities.
NOTE
The symbol for a facility and the number of facilities may vary between different countries.
New symbols may appear and others disappear in conjunction with updating the map data - one can scroll through all the POI symbols for the relevant map system under Settings in the menu system.
Shown here are examples of symbols for dif- ferent facilities - they are grouped here accord- ing to their function in society:
Petrol station
Petrol station with CNG (biogas)
Petrol station with LPG
Car wash
Car workshop
Car hire
Motorsport facility
Volvo dealer
Parking
Parking garage
Parking, large vehicles
Tourist information
Historical monument
Tourist attraction
Ice skating
Sport facility
Exercise facility
Ski facility
Cinema
Amusement park
05 Symbols on the map
Facilities
05
71
Animal park
Opera
Theatre
Bar
Nightclub
Restaurant
Restaurant
Restaurant, Chinese
Restaurant, seafood
Fastfood
Coffee shop
Shopping Centre
Dry cleaners
Kiosk
Hairdresser
Rest area
Camp site
Hotel
Conference facility
Exhibition grounds
Train station
Commuter railway station
Airport
Bus station
Ferry
Marina
Marina
Civic building
Authority
University
University
City centre
City centre
Police station
Fire station
Library
Hospital
Pharmacy
Bank
ATM
Post office
Kindergatan
School
72
Frequently asked questions.................................................................... 74 EULA - License agreement..................................................................... 76 Copyright................................................................................................ 78
QUESTIONS AND ANSWERS
06 Questions and answers
Frequently asked questions
06
74
The position of the car on the map is
wrong
The Navigation system shows the position of the car to an accuracy of about 20 metres.
There is a greater chance of error when driving on roads lying parallel to another road, on winding roads, on roads on several levels and after driving a long distance without making any distinctive turns.
High mountains, buildings, tunnels, viaducts, over/underpasses etc. also have a negative affect on the reception of GPS signals, which means that accuracy in calculating the position of the car may decrease.
The system does not always calculate
the fastest/shortest route
When calculating a route outline, distance, width of road, type of road, number of right or left turns, roundabouts etc. are all taken into account in order to produce the best theoreti- cal route. A more efficient selection of route may be possible based on experience and knowledge of the area.
The system uses toll roads, motorways
and ferries even though I chose to avoid
them
For technical reasons, the system can only use major roads when calculating a route outline extending over a long distance.
If you selected to avoid toll roads and motor- ways, then they are avoided to the greatest possible extent and are only used if there is no other reasonable alternative available.
The position of the car on the map is
incorrect after transportation
If the car is transported, for example by ferry or train, or in such a way as to impede the recep- tion of GPS signals, it can take up to 5 minutes before the position of the car is cor- rectly calculated.
The position of the car on the map is
incorrect after the car battery has been
disconnected
If power has been cut from the GPS antenna, it can take more than 5 minutes for the GPS signals to be received correctly and the posi- tion of the car to be calculated.
The car symbol on screen behaves errati-
cally after a tyre change
In addition to the GPS receiver, the car's speed sensor and a gyro assist in calculating the cur- rent position and direction of travel of the car. After fitting the spare wheel or changing between summer and winter tyres the system needs to "learn" the size of the new wheels.
In order for the system to work optimally it is recommended to turn the steering wheel to full
lock a few times while driving, in a suitable location.
The map image does not correspond
with the real situation
Factors such as the constant expansion and rebuilding of the road network, new traffic reg- ulations constantly being introduced etc. mean that the map database is not always complete.
Continuous development and updating of map data is underway - a Volvo dealer can provide more information.
See also www.volvocars.com/navi for further information on maps etc.
The scale of the map sometimes
changes
There is no detailed map information in certain areas. The system then automatically changes the degree of magnification.
The expected menu option is missing
Check the settings that have been made. Select Reset navigation settings to restore the original settings.
If this does not help, select Delete all user
data.
06 Questions and answers
Frequently asked questions
06
75
The car symbol on screen jumps
forwards or spins
The system may need a few seconds to sense the position and movement of the car before driving off.
Switch off both the system and the engine. Start again, but remain stationary for a while before starting to drive.
I shall go on a long trip but do not want
specify a particular route outline to the
cities I plan to travel through - How do I
most simply create an itinerary?
Specify the destination directly on the map using the hairline cross. The system automati- cally guides you to the final destination even though you are driving beside the intermediate destinations.
My map information is not up-to-date
Contact your nearest Volvo Dealer regarding the updating of map data.
See also www.volvocars.com/navi
How can I easily check which map
version is used?
See Settings System information Map
version: for information on version and geo- graphic area covered.
06 Questions and answers
EULA - License agreement
06
76
Notice to the user
PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE NAVTEQ DATABASE.
THIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT FOR SALE BETWEEN YOU AND NAVTEQ EUROPE B.V. FOR YOUR COPY OF THE NAVTEQ NAVIGABLE MAP DATABASE, INCLUDING ASSOCIATED COM- PUTER SOFTWARE, MEDIA AND EXPLANA- TORY PRINTED DOCUMENTATION PUB- LISHED BY NAVTEQ (JOINTLY "THE DATA- BASE"). BY USING THE DATABASE, YOU ACCEPT AND AGREE TO ALL TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT ("AGREEMENT"). IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREE- MENT, PROMPTLY RETURN THE DATABASE, ALONG WITH ALL OTHER ACCOMPANYING ITEMS, TO YOUR SUPPLIER FOR A REFUND.
OWNERSHIP
The Database and the copyrights and intellec- tual property or neighbouring rights therein are owned by NAVTEQ or its licensors. Ownership of the media on which the Database is con- tained is retained by NAVTEQ and/or your sup- plier until after you have paid in full any amounts due to NAVTEQ and/or your supplier pursuant to this Agreement or similar agree- ment(s) under which goods are provided to you.
LICENSE GRANT
NAVTEQ grants you a non-exclusive license to use the Database for your personal use or, if applicable, for use in your business' internal operations. This license does not include the right to grant sub-licenses.
LIMITATIONS ON USE
The Database is restricted for use in the spe- cific system for which it was created. Except to the extent explicitly permitted by mandatory laws (e.g. national laws based on the European Software Directive (91/250) and the Database Directive (96/9)), you may not extract or reutil- ise substantial parts of the contents of the Database nor reproduce, copy, modify, adapt, translate, disassemble, decompile, reverse engineer any portion of the Database. If you wish to obtain interoperability information as meant in (the national laws based on) the Euro- pean Software Directive, you shall grant NAV- TEQ reasonable opportunity to provide said information on reasonable terms, including costs, to be determined by NAVTEQ.
TRANSFER OF LICENSE
You may not transfer the Database to third par- ties, except when installed in the system for which it was created or when you do not retain any copy of the Database, and provided that the transferee agrees to all terms and condi- tions of this Agreement and confirms this in
writing to NAVTEQ. Multi-disc sets may only be transferred or sold as a complete set as provi- ded by NAVTEQ and not as subset thereof.
LIMITED WARRANTY
NAVTEQ warrants that, subject to the warnings set out below, for a period of 12 months after acquisition of your copy of the Database, it will perform substantially in accordance with NAV- TEQ's Criteria for Accuracy and Completeness existing on the date you acquired the Data- base; these criteria are available from NAV- TEQ at your request. If the Database does not perform in accordance with this limited war- ranty, NAVTEQ will use reasonable efforts to repair or replace your non-conforming copy of the Database. If these efforts do not lead to performance of the Database in accordance with the warranties set out herein, you will have the option to either receive a reasonable refund of the price you paid for the Database or to rescind this Agreement. This shall be NAV- TEQ's entire liability and your sole remedy against NAVTEQ. Except as expressly provi- ded in this section, NAVTEQ does not warrant nor make any representations regarding the use of results of the use of the Database in terms of its correctness, accuracy, reliability, or otherwise. NAVTEQ does not warrant that the Database is or will be error free. No oral or writ- ten information or advice provided by NAV- TEQ, your supplier or any other person shall
06 Questions and answers
EULA - License agreement
06
77
create a warranty or in any way increase the scope of the limited warranty described above. The limited warranty set forth in this Agreement does not affect or prejudice any statutory legal rights that you may have under the legal war- ranty against hidden defects.
If you did not acquire the Database from NAV- TEQ directly, you may have statutory rights against the person from whom you have acquired the Database in addition to the rights granted by NAVTEQ hereunder according to the law of your jurisdiction. The above warranty of NAVTEQ shall not affect such statutory rights and you may assert such rights in addi- tion to the warranty rights granted herein.
LIMITATION OF LIABILITY
The price of the Database does not include any consideration for assumption of risk of conse- quential, indirect or unlimited direct damages which may arise in connection with your use of the Database. Accordingly, in no event shall NAVTEQ be liable for any consequential or indirect damages, including without limitation, loss of revenue, data, or use, incurred by you or any third party arising out of your use of the Database, whether in an action in contract or tort or based on a warranty, even if NAVTEQ has been advised of the possibility of such damages. In any event NAVTEQ's liability for
direct damages is limited to the price of your copy of the Database.
THE LIMITED WARRANTY AND LIMITATION OF LIABILITY, SET FORTH IN THIS AGREE- MENT, DO NOT AFFECT OR PREJUDICE YOUR STATUTORY RIGHTS WHERE YOU HAVE ACQUIRED THE DATABASE OTHER- WISE THAN IN THE COURSE OF A BUSI- NESS.
WARNINGS
The Database may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results. The Database does not include or reflect information on - inter alia - neighbourhood safety; law enforcement; emer- gency assistance; construction work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; traffic congestion; or travel time.
GOVERNING LAW
This Agreement shall be governed by the laws of the jurisdiction, in which you reside at the date of acquisition of the Database. Should you at that moment reside outside the European Union or Switzerland, the law of the jurisdiction within the European Union or Switzerland
where you acquired the Database shall apply. In all other cases, or if the jurisdiction where you acquired the Database cannot be defined, the laws of the Netherlands shall apply. The courts competent at your place of residence at the time you acquired the Database shall have jurisdiction over any dispute arising out of, or relating to this Agreement, without prejudice to NAVTEQ's right to bring claims at your then current place of residence.
06 Questions and answers
Copyright
06
78
Austria
Bundesamt fr Eich- und Vermessungswe- sen.
France
Source Goroute IGN France & BD Carto IGN France.
Germany
Die Grundlagendaten wurden mit Genehmi- gung der zustndigen Behrden entnommen.
Great Britain
Based upon Crown Copyright material.
Greece
Copyright Geomatics Ltd.
Hungary
Copyright 2003; Top-Map Ltd.
Italy
La Banca Dati Italiana stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana.
Norway
Copyright 2000; Norwegian Mapping Authority.
Poland
EuroGeographics.
Portugal
Source: IgeoE - Portugal.
Spain
Informacin geogrfica propiedad del CNIG.
Sweden
Based upon electronic data National Land Survey Sweden.
Switzerland
Topografische Grundlage: Bundesamt fr Landestopographie.
NOTE
Australia is not covered by this Agreement, see special information.
2005 - 2012 NAVTEQ All rights reserved.
Denso
Hereby, DENSO CORPORATION declares that this DN-NS-020 is in com- pliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
06 Questions and answers
06
79
07 Alphabetical Index
07
80
A
About information on the map disc................. 56
Acoustic signal Stored location..................................... 44
Activating the system.................................. 8
Additional information................................ 20
Address enter...................................................... 40
Antenna location................................................. 17
Arrow keys................................................. 20
Audible signal stored location...................................... 44
Auto. notification........................................ 51
Avoid ferries.................................................... 52 motorways............................................ 52 toll roads............................................... 52
Avoid stretch of road................................. 48
B
Back to starting point................................ 45
Basic functions.......................................... 19
Basic settings............................................ 14
Battery remote control...................................... 20
Brackets with English text......................... 12
C
Change scale of traffic information............ 63
Changes in the manual.............................. 13
Compass................................................... 31
Component positioning, overview............. 16
Crosshair................................................... 33
Current position on the map...................... 50
D
Delete itinerary........................................... 48
Demo......................................................... 59
Destination set......................................................... 40
Distance unit ETA....................................................... 56 RTA....................................................... 56
DVD disc care....................................................... 29 changing............................................... 28
E
English text in brackets............................. 12
Enter an itinerary........................................ 47
Erase user information............................... 58
ETA, distance unit...................................... 56
Extent......................................................... 63
F
Facilities Symbols................................................ 70
Facilities as destination............................. 41
Factory settings......................................... 14
07 Alphabetical Index
07
81
Functions keypad and remote control.................. 20
G
GPS information........................................ 56
GPS receiver.............................................. 17
Guidance................................................... 47 quick guide............................................. 8
Guiding options......................................... 51
I
IR receiver and remote control.................. 20
J
Junction..................................................... 40
K
Keypad....................................................... 20 location........................................... 17, 18
L
Licence code............................................. 28
M
Main unit location................................................. 17
Map point on................................................. 45
Map areas.................................................. 28
Map colour................................................. 53
Map image................................................. 30
Map mode................................................. 14
Map options............................................... 53
Map scroll.................................................. 33
Map version............................................... 56
Map view................................................... 53
Menus/functions........................................ 34
My POI........................................... 43, 56, 57
N
Next destination in itinerary....................... 48
O
On/Off........................................................ 14
Overview component location................... 16
P
Pause route guidance................................ 33
POIs on the map........................................ 54
Post code search................................................... 46
R
Read traffic message........................... 51, 64
Reset navigation settings.......................... 58
Return to default settings.......................... 58
Return trip.................................................. 45
Road sign information............................... 55
07 Alphabetical Index
07
82
Route options...................................... 52, 55
RSI - Road Sign Information...................... 55
RTA, distance unit..................................... 56
S
Save a location.......................................... 43
Saved destinations.................................... 44
Scale change............................................ 45, 63
Scrolling..................................................... 33
Search post code.............................................. 46 via point on map................................... 45
Search paths described in the manual...... 12
Set destination........................................... 40
Simulation.................................................. 59
Speakers location................................................. 18
Start guidance........................................... 47
Store a location.......................................... 43
Stored location Acoustic signal..................................... 44 add information.................................... 44
Stored locations......................................... 43
Symbols facilities................................................. 70
System options.......................................... 56
System settings......................................... 14
T
TMC receiver............................................. 17
Traffic-info. selection................................. 51
Traffic information................................ 17, 51 transmission......................................... 62
Traffic symbols on the map....................... 62
Transport of car......................................... 74
TV screen care....................................................... 29
V
Voice commands (Voice control)............... 22
Voice control.............................................. 22
Voice guidance.......................................... 31
Volume control for voice messages.......... 17
W
Waypoint.................................................... 48
Related manuals for Volvo V70 Road and Traffic Information System 2013 Instruction Manual
Manualsnet FAQs
If you want to find out how the V70 Volvo works, you can view and download the Volvo V70 Road and Traffic Information System 2013 Instruction Manual on the Manualsnet website.
Yes, we have the Instruction Manual for Volvo V70 as well as other Volvo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Instruction Manual should include all the details that are needed to use a Volvo V70. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Volvo V70 Road and Traffic Information System 2013 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Volvo V70 Road and Traffic Information System 2013 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Volvo V70 Road and Traffic Information System 2013 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Volvo V70 Road and Traffic Information System 2013 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Volvo V70 Road and Traffic Information System 2013 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.