Volvo XC60 2013 Owners Manual PDF

1 of 416
1 of 416

Summary of Content for Volvo XC60 2013 Owners Manual PDF

OWNERS MANUAL XC60

DEAR VOLVO OWNER THANK YOU FOR CHOOSING VOLVO

We hope you will enjoy many years of driving pleasure in your Volvo. The car has been designed for the safety and comfort of you and your passengers. Volvo is one of the safest cars in the world. Your Volvo has also been designed to satisfy all current safety and environmental requirements.

In order to increase your enjoyment of the car, we recommend that you familiarise yourself with the equipment, instructions and mainte- nance information contained in this owner's manual.

Table of contents

2 * Option/accessory, for more information, see Introduction.

00 00 Introduction

Important information................................. 6 Volvo and the environment....................... 11

01 01 Safety

Seatbelts .................................................. 16 Airbags...................................................... 19 Activating/deactivating the airbag*........... 22 Side airbags (SIPS bags) ......................... 24 Inflatable Curtain (IC) ............................... 26 WHIPS ...................................................... 27 Roll-Over Protection System - ROPS....... 29 When the systems deploy ........................ 30 Safety mode.............................................. 31 Child safety............................................... 32 02

02 Locks and alarm

Remote control key/key blade.................. 46 Battery replacement, remote control key/ PCC*......................................................... 51 Keyless drive*............................................ 53 Locking/unlocking..................................... 56 Child safety locks...................................... 62 Alarm*....................................................... 63

Table of contents

* Option/accessory, for more information, see Introduction. 3

03 03 Your driving environment

Instruments and controls.......................... 68 Volvo Sensus ........................................... 77 Key positions............................................ 78 Seats......................................................... 80 Steering wheel.......................................... 85 Lighting..................................................... 86 Wipers and washing.................................. 98 Windows, rearview and door mirrors...... 101 Compass*............................................... 106 Power panorama roof* ........................... 107 Alcolock*................................................. 110 Starting the engine.................................. 114 Starting the engine external battery..... 119 Gearboxes............................................... 120 DRIVe Start/Stop*................................... 126 All-wheel drive AWD*........................... 132 Foot brake............................................... 133 HDC Hill Descent Control....................... 135 Parking brake.......................................... 137

HomeLink *............................................ 141

04 04 Driver support

DSTC Stability and traction control sys- tem.......................................................... 146 Road sign information - RSI*.................. 148 Cruise control*........................................ 150 Adaptive cruise control*.......................... 152 Distance Warning*.................................. 162 City Safety........................................... 165 Collision Warning with Auto Brake & Pedestrian Protection*............................ 170 Driver Alert System*................................ 178 Driver Alert System - DAC*..................... 179 Driver Alert System - LDW*..................... 182 Park assist syst*...................................... 185 Park assist camera*................................ 188 BLIS* Blind Spot Information System. . 191 05

05 Comfort and driving pleasure

Menus and messages............................. 198 Menu source MY CAR............................ 200 Climate control........................................ 208 Fuel-driven engine block heater and pas- senger compartment heater*.................. 218 Additional heater*.................................... 221 Trip computer......................................... 222 Adapting driving characteristics............. 224 Comfort inside the passenger compart- ment........................................................ 225

Table of contents

4 * Option/accessory, for more information, see Introduction.

06 06 Infotainment system

General information on infotainment...... 232 Radio....................................................... 244 Media player........................................... 251 External audio source via AUX/USB* input........................................................ 255

Media Bluetooth * ................................. 258

Bluetooth handsfree*............................ 261 Voice recognition* mobile phone............ 270 TV*........................................................... 274 Remote control* ..................................... 278 RSE - Rear Seat Entertainment system* 280 07

07 During your journey

Recommendations during driving........... 292 Refuelling................................................ 295 Fuel......................................................... 296 Loading................................................... 299 Cargo area.............................................. 302 Driving with a trailer................................ 305 Towing and recovery.............................. 311

08 08 Wheels and tyres

General ................................................... 316 Changing wheels ................................... 320 Tyre pressure ......................................... 323 Warning triangle and first-aid kit*............ 324 Emergency puncture repair (TMK)* ........ 325

Table of contents

5

09 09 Maintenance and service

Engine compartment............................... 332 Lamps..................................................... 339 Wiper blades and washer fluid................ 345 Battery..................................................... 348 Fuses...................................................... 353 Car care.................................................. 364

10 10 Specifications

Type designations................................... 372 Dimensions and weights......................... 374 Engine specifications.............................. 377 Engine oil................................................ 378 Fluids and lubricants............................... 380 Fuel......................................................... 382 Wheel and tyres, dimensions and pres- sure ........................................................ 385 Electrical system..................................... 386 Type approval......................................... 387 Symbols in the display............................ 399 11

11 Alphabetical Index

Alphabetical Index.................................. 402

Introduction

Important information

6 * Option/accessory, for more information, see Introduction.

Reading the Owner's Manual

Introduction

A good way of getting to know your new car is to read the owner's manual, ideally before your first journey. This will give you the opportunity to familiarise yourself with new functions, to see how best to handle the car in different sit- uations, and to make the best use of all the car's features. Please pay attention to the safety instructions contained in the manual.

The specifications, design features and illus- trations in this owner's manual are not binding. We reserve the right to make modifications without prior notice. Volvo Car Corporation

Option

All types of option/accessory are marked with an asterisk*.

In addition to standard equipment, this manual also describes options (factory fitted equip- ment) and certain accessories (retrofitted extra equipment).

The equipment described in the owner's man- ual is not available in all cars - they have dif- ferent equipment depending on adaptations for the needs of different markets and national or local laws and regulations.

In the event of uncertainty over what is stand- ard or an option/accessory, contact a Volvo dealer.

Special texts

WARNING

Warning texts advise of a risk of personal injury.

IMPORTANT

Important texts advise of a risk of material damage.

NOTE

NOTE texts give advice or tips that facilitate the use of features and functions for exam- ple.

Footnote

There is footnote information in the owner's manual that is located at the bottom of the page. This information is an addition to the text that it refers to via a number. If the footnote refers to text in a table then letters are used instead of numbers for referral.

Message texts

There are displays in the car that show text messages. These text messages are high-

lighted in the owner's manual by means of the text being slightly larger and printed in grey. Examples of this are in menu texts and mes- sage texts on the information display (e.g. Audio settings).

Decals

The car contains different types of decal which are designed to convey important information in a simple and clear manner. The decals in the car have the following descending degree of importance for the warning/information.

Warning for personal injury

G031590

Black ISO symbols on yellow warning field, white text/image on black message field. Used to indicate the presence of danger which, if the

Introduction

Important information

7

warning is ignored, may result in serious per- sonal injury or fatality.

Risk of property damage

G 03 15 92

White ISO symbols and white text/image on black or blue warning field and message field. Used to indicate the presence of danger which, if the warning is ignored, may result in damage to property.

Information

G 03 15 93

White ISO symbols and white text/image on black message field.

NOTE

The labels shown in the owner's manual are not provided as exact reproductions of those in the car. The purpose is to show their approximate appearance and location in the car. The information that applies to your car in particular is available on the label in question in your car.

Procedure lists

Procedures where action must be taken in a certain sequence are numbered in the owner's manual.

When there is a series of illustrations for step-by-step instructions each step is numbered in the same way as the corres- ponding illustration.

There are numbered lists with letters adja- cent to the series of illustrations where the order of the instructions is not significant.

Arrows appear numbered and unnum- bered and are used to illustrate a move- ment.

Arrows with letters are used to clarify a movement when the reciprocal order is of no relevance.

If there is no series of illustrations for step-by- step instructions then the different steps are numbered with normal numbers.

Position lists

Red circles containing a number are used in overview images where different com- ponents are pointed out. The number recurs in the position list featured in con- nection with the illustration that describes the item.

Introduction

Important information

8 * Option/accessory, for more information, see Introduction.

Bulleted lists

A bulleted list is used when there is a list of points in the owner's manual.

Example:

Coolant

Engine oil

To be continued

This symbol is located furthest down to the right when a section continues on the following page.

Recording data

Your vehicle contains a number of computers whose function is to continuously check and monitor the vehicle's operation and function- ality. Some of the computers can record infor- mation during normal driving if they detect an error. In addition, information is recorded in the event of a collision or incident. Parts of the recorded information are required so that tech- nicians can diagnose and rectify faults in the vehicle during servicing and maintenance and so that Volvo can fulfil legal requirements and other regulations. In addition to this, the infor- mation is used for research purposes by Volvo in order to continually develop quality and safety, as the information can contribute to a better understanding of the factors that cause accidents and injuries. The information

includes details of the status and functionality of various systems and modules in the vehicle with regard to engine, throttle, steering and brake systems, amongst other things. This information may include details regarding the way the driver drives the vehicle, such as vehi- cle speed, brake and accelerator pedal use, steering wheel movement and whether or not the driver and passengers have used their seatbelts. For the reasons given this informa- tion may be stored in the vehicle's computers for a certain length of time, but also as a result of a collision or incident. This information may be stored by Volvo as long as it can help to further develop and further enhance safety and quality and as long as there are legal require- ments and other regulations that Volvo needs to consider.

Volvo will not contribute to the above-descri- bed information being disclosed to third parties without the vehicle owner's consent. However, due to national legislation and regulations Volvo may be required to disclose such infor- mation to authorities such as police authorities, or others who may assert a legal right to have access to it.

To be able to read and interpret the information recorded by the computers in the vehicle requires special technical equipment that Volvo, and workshops that have entered into agreements with Volvo, have access to. Volvo

is responsible that the information, which is transferred to Volvo during servicing and main- tenance, is stored and handled in a secure manner and that the handling complies with applicable legal requirements. For further infor- mation - contact a Volvo dealer.

Accessories and extra equipment

The incorrect connection and installation of accessories can negatively affect the car's electrical system. Certain accessories only function when their associated software is installed in the car's computer system. Volvo therefore recommends that you always con- tact an authorised Volvo workshop before installing accessories which are connected to or affect the electrical system.

Change of ownership for cars with Volvo On Call*

Volvo On Call is a supplemental service that consists of safety, security and comfort serv- ices. If the car has Volvo On Call and there is a change of owner, it is very important that these services are discontinued so that the former owner cannot access the services in the car. Contact the call centre by pressing the ON

CALL button in the car or contact an author- ised Volvo workshop. See also "Changing the security code" in the owner's manual for Volvo On Call.

Introduction

Important information

9

Laser sensor

This vehicle is equipped with a sensor which transmits laser light. It is absolutely essential to follow the prescribed instructions when han- dling the laser sensor.

The following two labels in English are fitted directly on the laser sensor unit:

The upper label in the figure describes the laser beam's classification:

Laser radiation - Do not look into the laser beam with optical instruments - Class 1M laser product.

The lower label in the figure describes the laser beam's physical data:

IEC 60825-1:1993 + A2:2001. Complies with FDA (U.S. Food Administration) stand- ards for laser product design with the

exception of deviations in accordance with "Laser Notice No. 50" from 26 July 2001.

Radiation data for the laser sensor

The following table specifies the laser sensor's physical data.

Maximum pulse energy 2.64 J

Maximum average output 45 mW

Pulse duration 33 ns

Divergence (horizontal x verti- cal)

28 12

WARNING

If any of these instructions are not followed then there is a risk of eye injury!

Never look into the laser sensor (which emits spreading invisible laser radiation) at a distance of 100 mm or closer with magnifying optics such as a magnifying glass, microscope, lens or similar opti- cal instruments.

Testing, repair, removal, adjustment and/or replacement of the laser sen- sor's spare parts must only be carried out by a qualified workshop - we rec- ommend an authorised Volvo work- shop.

To avoid exposure to harmful radiation, do not carry out any readjustments or maintenance other than those specified here.

The repairer must follow specially drawn up workshop information for the laser sensor.

Do not remove the laser sensor (this includes removing the lenses). A removed laser sensor does not fulfil laser class 3B as per standard IEC 60825-1. Laser class 3B is not eye-safe and therefore entails a risk of injury.

Introduction

Important information

10

The laser sensor's connector must be unplugged before removal from the windscreen.

The laser sensor must be fitted onto the windscreen before the sensor's con- nector is plugged in.

The laser sensor transmits laser light when the remote control key is in posi- tion II and also with the engine switched off (see page 78 on key positions).

For more information on the laser sensor, see page 165.

Information on the Internet

At www.volvocars.com there is further infor- mation concerning your car.

To be able to read the QR code, you need a QR code reader, which is available as an add-on for a number of mobile phones. A QR code reader can be downloaded from the App Store or Android Market.

QR code

Introduction

Volvo and the environment

* Option/accessory, for more information, see Introduction. 11

Volvo Cars' environmental philosophy

G 00 00 00

Environmental care is one of Volvo Car Corpo- ration's core values which influence all opera- tions. We also believe that our customers share our consideration for the environment.

Your Volvo complies with strict international environmental standards and is also manufac- tured in one of the cleanest and most resource- efficient plants in the world. Volvo Car Corpo- ration has global ISO certification, which includes the environmental standard ISO 14001 covering all factories and several of our other units. We also set requirements for our partners so that they work systematically with environmental issues.

Fuel consumption

Volvo cars have competitive fuel consumption in each of their respective classes. Lower fuel consumption generally results in lower emis- sion of the greenhouse gas, carbon dioxide.

It is possible for the driver to influence fuel con- sumption. For more information read under the heading, Reducing environmental impact.

Efficient emission control

Your Volvo is manufactured following the con- cept "Clean inside and out" a concept that encompasses a clean interior environment as well as highly efficient emission control. In

many cases the exhaust emissions are well below the applicable standards.

Clean air in the passenger compartment

A passenger compartment filter prevents dust and pollen from entering the passenger com- partment via the air intake.

A sophisticated air quality system, IAQS* (Inte- rior Air Quality System) ensures that the incom- ing air is cleaner than the air in the traffic out- side.

The system consists of an electronic sensor and a carbon filter. The incoming air is moni- tored continuously and if there is an increase in

Introduction

Volvo and the environment

12 * Option/accessory, for more information, see Introduction.

the level of certain unhealthy gases such as carbon monoxide then the air intake is closed. Such a situation may arise in heavy traffic, queues and tunnels for example.

The entry of nitrous oxides, ground-level ozone and hydrocarbons is prevented by the carbon filter.

Interior

The interior of a Volvo is designed to be plea- sant and comfortable, even for people with contact allergies and for asthma sufferers. Extreme attention has been given to choosing environmentally-compatible materials.

Volvo workshops and the environment

Regular maintenance creates the conditions for a long service life and low fuel consumption for your car. In this way you contribute to a cleaner environment. When Volvo's workshops are entrusted with the service and mainte- nance of your car it becomes part of our sys- tem. Volvo makes clear demands regarding the way in which our workshops are designed in order to prevent spills and discharges into the environment. Our workshop staff have the knowledge and the tools required to guarantee good environmental care.

Reducing environmental impact

You can easily help reduce environmental impact - here are a few tips:

Avoid letting the engine idle - switch off the engine when stationary for longer periods. Pay attention to local regulations.

Drive economically - think ahead.

Perform service and maintenance in accordance with the owner's manual's instructions - follow the Service and War- ranty Booklet's recommended intervals.

If the car is equipped with an engine block heater*, use it before starting from cold - it improves starting capacity and reduces wear in cold weather and the engine rea- ches normal operating temperature more quickly, which lowers consumption and reduces emissions.

High speed increases consumption con- siderably due to increased wind resistance - a doubling of speed increases wind resis- tance 4 times.

Always dispose of environmentally hazar- dous waste, such as batteries and oils, in an environmentally safe manner. Consult a workshop in the event of uncertainty about how this type of waste should be discarded - an authorised Volvo workshop is recom- mended.

Following this advice can save money, the planet's resources are saved, and the car's durability is extended. For more information and further advice, see the pages 292 and 382.

Recycling

As a part of Volvo's environmental work, it is important that the car is recycled in an envi- ronmentally sound manner. Almost all of the car can be recycled. The last owner of the car is therefore requested to contact a dealer for referral to a certified/approved recycling facility.

The owner's manual and the environment

The Forest Stewardship Council symbol shows that the paper pulp in this publication comes from FSC certified forests or other controlled sources.

Introduction

13

14 * Option/accessory, for more information, see Introduction.

Seatbelts ................................................................................................ 16 Airbags.................................................................................................... 19 Activating/deactivating the airbag*......................................................... 22 Side airbags (SIPS bags) ....................................................................... 24 Inflatable Curtain (IC) ............................................................................. 26 WHIPS .................................................................................................... 27 Roll-Over Protection System - ROPS..................................................... 29 When the systems deploy ...................................................................... 30 Safety mode............................................................................................ 31 Child safety............................................................................................. 32

SAFETY

01 Safety

Seatbelts 01

16

General information

Heavy braking can have serious consequences if the seatbelts are not used. Ensure that all passengers use their seatbelts.

It is important that the seatbelt lies against the body so it can provide maximum protection. Do not lean the backrest too far back. The seatbelt is designed to protect in a normal seating position.

Putting on a seatbelt

Pull the belt out slowly and secure it by press- ing its locking tab into the seatbelt buckle. A loud "click" indicates that the belt has locked.

The buckles only fit the intended lock in the rear seat1.

Releasing the seatbelt

Press the red button on the seatbelt buckle and then let the belt retract. If the seatbelt does not retract fully, feed it in by hand so that it does not hang loose.

The seatbelt locks and cannot be with-

drawn:

if it is pulled out too quickly

during braking and acceleration

if the car leans heavily.

Make sure that you:

do not use clips or anything else that can prevent the seatbelt from fitting properly

ensure that the seatbelt is not twisted or caught on anything

the hip strap must be positioned low down (not over the abdomen)

tension the hip strap over the lap by pulling the diagonal shoulder belt up towards the shoulder.

WARNING

The seatbelts and airbags interact. If a seat- belt is not used or is used incorrectly, this may diminish the protection provided by the airbag in the event of a collision.

WARNING

Each seatbelt is designed for only one per- son.

WARNING

Never modify or repair the seatbelts your- self. Volvo recommends that you contact an authorised Volvo workshop.

If a seatbelt has been subjected to a major load, such as in conjunction with a collision, the entire seatbelt must be replaced. Some of the protective characteristics of the seat- belt may have been lost, even if it appears to be undamaged. In addition, replace the seatbelt if the belt is worn or damaged. The new seatbelt must be type-approved and intended for installation in the same position as the replaced seatbelt.

1 Certain markets.

01 Safety

Seatbelts 01

17

Seatbelts and pregnancy

G 02

09 98

The seatbelt should always be worn during pregnancy. But it is crucial that it be worn in the correct way. The diagonal section should wrap over the shoulder then be routed between the breasts and to the side of the abdomen.

The lap section should lay flat over the thighs and as low as possible under the abdomen. It must never be allowed to ride upward. Remove the slack from the seatbelt and ensure that it fits as close to the body as possible. In addition, check that there are no twists in the seatbelt.

As the pregnancy progresses, pregnant drivers should adjust their seats and steering wheel such that they can easily maintain control of the vehicle as they drive (which means that they must be able to easily operate the foot pedals

and steering wheel). The aim should be to posi- tion the seat with as large a distance as possi- ble between abdomen and steering wheel.

Seatbelt reminder

G 01

77 26

Unbelted occupants will be reminded to fasten their seatbelts by means of an audio and visual reminder. The audio reminder is speed dependent, and in some cases time depend- ent. The visual reminder is located in the roof console and the combined instrument panel.

Child seats are not covered by the seatbelt reminder system.

Rear seat

The seatbelt reminder in the rear seat has two subfunctions:

Provides information on which seatbelts are being used in the rear seat. A message appears in the information display when the seatbelts are in use, or if one of the rear doors has been opened. The message is cleared automatically after driving for approximately 30 seconds or after press- ing the indicator stalk's OK button.

Provides a warning if one of the rear seat- belts is unfastened during travel. This warning takes the form of a message on the information display along with the audio/visual signal. The warning stops when the seatbelt is re-fastened, or it can also be acknowledged manually by press- ing the OK button.

The message on the information display show- ing which seatbelts are in use is always avail- able. Press the OK button to see stored mes- sages.

01 Safety

Seatbelts 01

18

Certain markets

An acoustic signal and indicator lamp remind the driver and front seat passenger to use a seatbelt if either of them is not wearing one. At low speed, the audio reminder will sound for the first 6 seconds.

Seatbelt tensioner

All the seatbelts are equipped with belt ten- sioners. A mechanism in the seatbelt tensioner tightens the seatbelt in the event of a suffi- ciently violent collision. The seatbelt then pro- vides more effective restraint for the occu- pants.

WARNING

Never insert the tongue of the passenger's seatbelt into the buckle on the driver's side. Always insert the tongue of the seatbelt into the buckle on the correct side. Do not make any damages on seatbelts nor insert any foreign objects into a buckle. The seatbelts and buckles would then possibly not func- tion as intended in the event of a collision. There is a risk of serous injury.

01 Safety

Airbags 01

19

Warning symbol on the combined instrument panel

The warning symbol in the combined instru- ment panel illuminates when the remote con- trol key is in key position II. The symbol clears after approx. 6 seconds provided the airbag system is fault-free.

WARNING

If the warning symbol for the airbag system remains illuminated or illuminates while driv- ing, it means that the airbag system does not have full functionality. The symbol indi- cates a fault in the seatbelt tensioner sys- tem, SIPS, the IC system or some other fault in the system. Volvo recommends that you contact an authorised Volvo workshop immediately.

As well as the warning symbol, a message may appear on the information display in appropri- ate cases. If the warning symbol malfunctions, the warning triangle illuminates and SRS

Airbag Service required or SRS Airbag

Service urgent appears in the display. Volvo recommends that you contact an authorised Volvo workshop immediately.

Airbag system

G 01

86 65

Airbag system, left-hand drive car.

G 01

86 66

Airbag system, right-hand drive car.

The system consists of airbags and sensors. A sufficiently violent collision trips the sensors and the airbag(s) are inflated and become hot. To cushion the impact, the airbag deflates when compressed. When this occurs, smoke escapes into the car. This is completely nor- mal. The entire process, including inflation and deflation of the airbag, occurs within tenths of a second.

WARNING

Volvo recommends that you contact an authorised Volvo workshop for repair. Defective work in the airbag system could cause malfunction and result in serious per- sonal injury.

01 Safety

Airbags 01

20

NOTE

The sensors react differently depending on the course of the collision and whether or not the seatbelts on the driver and passen- ger side are used.

It is therefore possible that only one (or none) of the airbags may inflate in a colli- sion. The airbag system senses the force of the collision on the car and adapts accord- ingly so that one or more airbags are deployed.

The capacity of the airbags is also adapted to the collision force to which the vehicle is subjected.

Airbag on the driver's side

The car has an airbag to supplement the pro- tection afforded by the seatbelt on the driver's side. It is folded up into the centre of the steer- ing wheel. The steering wheel is marked AIRBAG.

WARNING

The seatbelts and airbags interact. If a seat- belt is not used or is used incorrectly, this may diminish the protection provided by the airbag in the event of a collision.

Passenger airbag

Location of the front passenger airbag in a left- hand drive car.

Location of the front passenger airbag in a right- hand drive car.

The car has an airbag to supplement the pro- tection afforded by the seatbelt on the passen- ger side. It is folded up into a compartment above the glovebox. Its cover panel is marked AIRBAG.

WARNING

The seatbelts and airbags interact. If the belt is not used or is used incorrectly, this may diminish the protection provided by the air- bag in the event of a collision.

To minimise the risk of injury if the airbag deploys, passengers must sit as upright as possible with their feet on the floor and backs against the backrest. Seatbelts must be secured.

WARNING

Do not put objects in front of or above the dashboard where the passenger airbag is located.

01 Safety

Airbags 01

21

WARNING

Never place a child in a child seat or on a booster cushion in the front seat if the airbag is activated.

Never allow anybody to stand or sit in front of the front passenger seat.

No one shorter than 140 cm should ever sit in the front passenger seat if the airbag is activated.

Failure to follow the advice given above can endanger life.

01 Safety

Activating/deactivating the airbag* 01

22 * Option/accessory, for more information, see Introduction.

Key switch off - PACOS*

General information

The airbag for the front passenger seat can be deactivated if the car is equipped with a switch, PACOS (Passenger Airbag Cut Off Switch). For information on how to activate/deactivate, see under the heading Activating/deactivating.

Key switch off/switch

The switch for the passenger airbag (PACOS) is located on the passenger end of the instru- ment panel and is accessible when the pas- senger door is open (see under the heading below, Activating/deactivating).

Check that the switch is in the required posi- tion. Volvo recommends that the remote con- trol key's key blade be used to change posi- tion.

For information on the key blade, see page 50.

WARNING

Failure to follow the advice given above could endanger the life of passengers in the car.

WARNING

If the car is equipped with a front passenger airbag, but does not have a PACOS switch (Passenger Airbag Cut Off Switch), then the airbag will always be activated.

WARNING

Never place a child in a child seat or on a booster cushion in the front seat if the airbag is activated and the symbol in the roof console is illuminated. Failure to follow this advice could endanger the life of the child.

WARNING

Do not allow anyone to sit in the front pas- senger seat if the message in the roof con- sole (see page 23) indicates that the air- bag is deactivated and if the warning sym- bol for the airbag system is also displayed in the combined instrument panel. This indi- cates that there has been a severe malfunc- tion. Visit a workshop as soon as possible. Volvo recommends that you contact an authorised Volvo workshop.

Activating/deactivating

Switch location.

The airbag is activated. With the switch in this position, persons taller than 140 cm can sit in the front passenger seat, but never children in a child seat or on a booster cushion.

The airbag is deactivated. With the switch in this position, children in a child seat or on a booster cushion can sit in the front passenger seat, but never persons taller than 140 cm.

01 Safety

Activating/deactivating the airbag* 01

* Option/accessory, for more information, see Introduction. 23

WARNING

Activated airbag (passenger seat):

Never place a child in a child seat or on a booster cushion on the front passenger seat when the airbag is activated. This applies to everyone shorter than 140 cm.

Deactivated airbag (passenger seat):

No one taller than 140 cm should ever sit in the front passenger seat when the airbag is deactivated.

Failure to follow the advice given above can endanger life.

NOTE

When the remote control key is in key posi- tion II the warning symbol for the airbag is displayed on the combined instrument panel for approx. 6 seconds (see page 19).

Following which, the indicator in the roof console is illuminated showing the correct status for the front passenger seat airbag. For more information about the different key positions for the remote control key, see page 78.

Activated airbag

G 01

78 00

Indicator showing that the passenger airbag is activated.

A warning symbol in the roof console indicates that the airbag for the front passenger seat is activated (see preceding illustration).

Deactivated airbag

2

2

G 01

77 24

Indicator showing that the passenger airbag is deactivated.

A text message and a symbol in the roof con- sole indicate that the airbag for the front pas- senger seat is deactivated (see preceding illus- tration).

01 Safety

Side airbags (SIPS bags) 01

24

Side airbag

G 03

29 49

In a side impact collision a large proportion of the collision force is transferred by the SIPS (Side Impact Protection System) to beams, pil- lars, the floor, the roof and other structural parts of the body. The side airbags at the driv- er's and front passenger seats protect the chest area and the hip and are an important part of the SIPS.

The SIPS bag system consists of two main components, side airbag and sensors. The side airbags are located in the front seat back- rests.

WARNING

Volvo recommends that repairs are only carried out by an authorised Volvo workshop. Defective work in the SIPS- bag system could cause malfunction and result in serious personal injury.

Do not put objects in the area between the outside of the seat and the door panel, since this area is required by the side airbag.

Volvo recommends the use only of car seat covers approved by Volvo. Other seat covers may impede the operation of the side airbags.

The side airbag is a supplement to the seatbelts. Always use a seatbelt.

Child seats and side airbags

The protection provided by the car to children seated in a child seat or on a booster cushion is not diminished by the side airbag.

A child seat or booster cushion can be placed on the front passenger seat provided that the car does not have an activated1 passenger air- bag.

Location

Driver's seat, left-hand drive.

Front passenger seat, left-hand drive.

The SIPS bag system consists of side airbags and sensors. A sufficiently violent collision trips

1 For information on activating/deactivating the airbag, see page 22.

01 Safety

Side airbags (SIPS bags) 01

25

the sensors and the side airbags are inflated. The airbag inflates between the occupant and the door panel and thereby cushions the initial impact. The airbag deflates when compressed by the collision. The side airbag is normally only deployed on the side of the collision.

01 Safety

Inflatable Curtain (IC) 01

26

Properties

The inflatable curtain IC (Inflatable Curtain) is a part of SIPS and the airbags. It is fitted in the headlining along both sides of the roof and protects the car's occupants sitting in the outer seats. A sufficiently violent collision trips the sensors and the inflatable curtain is inflated. The inflatable curtain helps to prevent the driver and passengers from striking their heads on the inside of the car during a collision.

WARNING

Never hang or attach heavy items onto the handles in the roof. The hook is only designed for light clothing (not for solid objects such as umbrellas for example).

Do not screw or install anything onto the car's headlining, door pillars or side panels. This could compromise the intended pro- tection. Volvo recommends that you only ever use Volvo genuine parts that are approved for placement in these areas.

WARNING

Do not load the car higher than 50 mm under the top edge of the door windows. Other- wise, the intended protection of the inflat- able curtain, which is concealed in the head- lining, may be compromised.

WARNING

The inflatable curtain is a supplement to the seatbelts.

Always use a seatbelt.

01 Safety

WHIPS 01

27

Protection against whiplash injury WHIPS

The whiplash protection system (WHIPS) con- sists of energy absorbing backrests and spe- cially designed head restraints in the front seats. The system is actuated by a rear-end collision, where the angle and speed of the col- lision, and the nature of the colliding vehicle all have an influence.

WARNING

The WHIPS system is a supplement to the seatbelts. Always use a seatbelt.

Properties of the seat

When the WHIPS system is deployed, the front seat backrests are lowered backward to alter the seating position of the driver and front seat passenger. This reduces the risk of whiplash injury.

WARNING

Never modify or repair the seat or WHIPS system yourself. Volvo recommends that you contact an authorised Volvo workshop.

WHIPS system and child seats/booster

cushions

The protection provided by the car to children seated in a child seat or on a booster cushion is not diminished by the WHIPS system.

Correct seating position

For the best possible protection, the driver and front seat passenger should sit in the centre of the seat with as little space as possible between the head and the head restraint.

Do not obstruct the WHIPS system

Do not leave any objects on the floor behind the driver's seat/passenger seat that may prevent the WHIPS system from functioning.

WARNING

Do not squeeze rigid objects between the rear seat cushion and the front seat back- rest. Make sure you do not to obstruct the function of the WHIPS system.

01 Safety

WHIPS 01

28

Do not place objects on the rear seat that may prevent the WHIPS system from functioning.

WARNING

If a rear seat backrest is folded down, the corresponding front seat must be moved forward so that it does not touch the folded backrest.

WARNING

If a seat has been subjected to extreme forces, such as due to a rear-end collision, the WHIPS system must be checked. Volvo recommends that it is checked by an authorised Volvo workshop.

Part of the WHIPS system's protective capacity may have been lost even if the seats appear to be undamaged.

Volvo recommends that you contact an authorised Volvo workshop to have the sys- tem checked even after a minor rear-end collision.

01 Safety

Roll-Over Protection System - ROPS 01

29

Function

Volvo's Roll-Over Protection System (ROPS) has been designed to reduce the risk of the car overturning and to provide the best possible protection in the event of such an accident.

The system consists of a stabiliser system, Roll Stability Control (RSC) that minimises the risk of overturning, for example, during sudden evasive manoeuvres or if the car skids.

The RSC system uses a sensor which registers changes in the car's lateral inclination angle. This information is used to calculate the risk of the car overturning. If a risk exists, the DSTC system engages, engine torque is lowered and one or more wheels are braked until the car has regained its stability.

For more information on the DSTC system, see page 146 .

WARNING

Under normal driving conditions, the RSC system improves the car's road safety, but this must not be taken as a reason to increase speed. Always follow the usual precautions for safe driving.

01 Safety

When the systems deploy 01

30

When the systems deploy

System Triggered

Seatbelt tensioner, front seat

In the event of a frontal collision, and/or side-impact collision, and/or rear-end collision and/or overturning

Seatbelt tensioner, rear seat

In a frontal collision and/or side-impact accident and/or overturning

Airbags (SRS) In a frontal collisionA

Side airbags (SIPS) In a side-impact accident

Inflatable Curtain IC In the event of a side impact and/or over- turning and/or some frontal collisions

Whiplash protection WHIPS

In a rear-end colli- sion

A The bodywork of the car could be greatly deformed in a col- lision without airbag deployment. A number of factors such as the rigidity and weight of the object hit, the speed of the car, the angle of the collision etc. affects how the different safety systems of the car are activated.

If the airbags have deployed, the following is recommended:

Recovering the car. Volvo recommends that you have it conveyed to an authorised Volvo workshop. Do not drive with deployed airbags.

Volvo recommends that you engage an authorised Volvo workshop to handle the replacement of components in the car's safety systems.

Always contact a doctor.

NOTE

The airbags and belt tensioner system are deployed only once during a collision.

WARNING

The airbag control module is located in the centre console. If the centre console is drenched with water or other liquid, discon- nect the battery cables. Do not attempt to start the car since the airbags may deploy. Recovering the car. Volvo recommends that you have it conveyed to an authorised Volvo workshop.

WARNING

Never drive with deployed airbags. They can make steering difficult. Other safety systems may also be damaged. The smoke and dust created when the airbags are deployed can cause skin and eye irritation/ injury after intensive exposure. In case of irritation, wash with cold water. The rapid deployment sequence and airbag fabric may cause friction and skin burns.

01 Safety

Safety mode 01

31

Driving after a collision

If the car is involved in a collision, the text Safety mode See manual may appear on the information display. This means that the car has reduced functionality. Safety mode is a protective state that is enforced when the col- lision may have damaged any of the car's vital functions, such as the fuel lines, sensors for one of the safety systems, or the brake system.

Attempting to start the car

First, check that no fuel is leaking from the car. There must be no smell of fuel either.

If everything seems normal and you have checked for indications of fuel leakage, you may attempt to start the car.

Remove the remote control key and open the driver's door. If a message is now shown to the

effect that the ignition is on, press the start button. Then close the door and reinsert the remote control key. The car's electronics will now try to reset themselves to normal mode. Then try to start the car.

If the message Safety mode See manual is still shown on the display then the car must not be driven or towed, but a vehicle recovery serv- ice used instead. Even if the car appears to be driveable, hidden damage may make the car impossible to control once moving.

Moving the car

If Normal mode is shown after Safety mode

See manual has been reset, the car can be moved carefully out of a dangerous position. Do not move the car further than necessary.

WARNING

Never attempt to repair your car or reset the electronics yourself if the car has been in safety mode. This could result in personal injury or the car not functioning as normal. Volvo recommends that you engage an authorised Volvo workshop to check and restore the car to normal status after Safety mode See manual has been displayed.

WARNING

Never, under any circumstances, attempt to restart the car if it smells of fuel when the Safety mode See manual message is dis- played. Leave the car at once.

WARNING

If the car is in safety mode it must not be towed. It must be transported from its loca- tion. Volvo recommends that it is transpor- ted to an authorised Volvo workshop.

01 Safety

Child safety 01

32

Children should sit comfortably and safely

Volvo recommends that children travel in rear- facing child seats until as late an age as pos- sible, at least until 3-4 years of age, and then front-facing booster cushions/child seats until up to 10 years of age.

The position of a child in the car and the choice of equipment are dictated by the child's weight and size, for more information, see page 33.

NOTE

Regulations regarding the placement of children in cars vary from country to coun- try. Check what does apply.

Children of all ages and sizes must always sit correctly secured in the car. Never allow a child to sit on the knee of a passenger.

Volvo has child safety equipment (child seats, booster cushions & attachment devices) which is designed for your particular car. Using Vol- vo's child safety equipment provides you with optimum conditions for your child to travel safely in the car. Furthermore, the child safety equipment fits and is easy to use.

NOTE

In the event of questions when fitting child safety products, contact the manufacturer for clearer instructions.

Child seats

G 02

07 39

Child seats and airbags are not compatible.

NOTE

When using child safety products it is important to read the installation instruc- tions included.

WARNING

Do not secure the straps of the child seat to the seat's horizontal adjustment bar, springs or the rails and beams under the seat. Sharp edges may damage the straps.

Look in the installation instructions for the child seat for the correct fitting.

Location of child seats

You may place:

a child seat/booster cushion on the pas- senger seat, provided the passenger air- bag is not activated1.

one or more child seats/booster cushions in the rear seat.

Always fit child seats/booster cushions in the rear seat if the passenger airbag is activated. If a child is sitting on the front passenger seat then he/she could suffer serious injury if the airbag deploys.

1 For information on activated/deactivated airbag, see page 22.

01 Safety

Child safety 01

33

WARNING

Never place a child in a child seat or on a booster cushion in the front seat if the airbag (SRS) is activated.

No one shorter than 140 cm should ever sit in the front passenger seat if the airbag (SRS) is activated.

Failure to follow the advice given above can endanger life.

WARNING

Booster cushions/child seats with steel braces or some other design that could rest on the seatbelt buckle's opening button must not be used, as they could cause the seatbelt buckle to open accidentally.

Do not allow the upper section of the child seat to rest against the windscreen.

Label Airbag

The label becomes visible when the passenger door is opened; see the illustration on page 22.

Recommended child seats2

Weight Front seat (with deactivated air- bag)

Outer rear seat Centre rear seat

Group 0

max 10 kg

Group 0+

max 13 kg

Volvo infant seat (Volvo Infant Seat) - rear-facing child seat, secured with the ISOFIX fixture system.

Type approval: E5 03301146

(L)

Group 0

max 10 kg

Group 0+

max 13 kg

Volvo infant seat (Volvo Infant Seat) - rear-facing child seat, secured with the car's seatbelt.

Type approval: E1 04301146

(U)

Volvo infant seat (Volvo Infant Seat) - rear-facing child seat, secured with the car's seatbelt.

Type approval: E1 03301146

(U)

Volvo infant seat (Volvo Infant Seat) - rear-facing child seat, secured with the car's seatbelt.

Type approval: E1 03301146

(U)

2 With regard to other child seats your car should be included in the manufacturer's enclosed list of vehicles or be universally approved in accordance with the ECE R44 legal requirement.

01 Safety

Child safety 01

34

Weight Front seat (with deactivated air- bag)

Outer rear seat Centre rear seat

Group 0

max 10 kg

Group 0+

max 13 kg

Rear-facing child seat (Child Seat) - rear-facing child seat, secured with the car's seatbelt and straps. Use a pro- tective cushion between the child seat and the dashboard.

Type approval: E5 03135

(L)

Rear-facing child seat (Child Seat) - rear-facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 03135

(L)

Rear-facing child seat (Child Seat) - rear-facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 03135

(L)

Group 0

max 10 kg

Group 0+

max 13 kg

Child seats which are universally approved.

(U)

Child seats which are universally approved.

(U)

Child seats which are universally approved.

(U)

Group 1

9-18 kg

Volvo rear-facing/turnable child seat (Volvo Convertible Child Seat) - rear- facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 04192

(L)

Volvo rear-facing/turnable child seat (Volvo Convertible Child Seat) - rear- facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 04192

(L)

01 Safety

Child safety 01

35

Weight Front seat (with deactivated air- bag)

Outer rear seat Centre rear seat

Group 1

9-18 kg

Rear-facing child seat (Child Seat) - rear-facing child seat, secured with the car's seatbelt and straps. Use a pro- tective cushion between the child seat and the dashboard.

Type approval: E5 03135

(L)

Rear-facing child seat (Child Seat) - rear-facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 03135

(L)

Rear-facing child seat (Child Seat) - rear-facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 03135

(L)

Group 1

9-18 kg

Britax Fixway rear-facing child seat, secured with the ISOFIX fixture system and straps.

Type approval: E5 03171

(L)

Group 1

9-18 kg

Child seats which are universally approved.

(U)

Child seats which are universally approved.

(U)

Child seats which are universally approved.

(U)

Group 2

15-25 kg

Volvo rear-facing/turnable child seat (Volvo Convertible Child Seat) - rear- facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 04192

(L)

Volvo rear-facing/turnable child seat (Volvo Convertible Child Seat) - rear- facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 04192

(L)

Volvo rear-facing/turnable child seat (Volvo Convertible Child Seat) - rear- facing child seat, secured with the car's seatbelt and straps.

Type approval: E5 04192

(L)

01 Safety

Child safety 01

36

Weight Front seat (with deactivated air- bag)

Outer rear seat Centre rear seat

Group 2

15-25 kg

Volvo rear-facing/turnable child seat (Volvo Convertible Child Seat) - front- facing child seat, secured with the car's seatbelt.

Type approval: E5 04191

(L)

Volvo rear-facing/turnable child seat (Volvo Convertible Child Seat) - front- facing child seat, secured with the car's seatbelt.

Type approval: E5 04191

(L)

Group 2/3

15-36 kg

Volvo booster seat with backrest (Volvo Booster Seat with backrest).

Type approval: E1 04301169

(UF)

Volvo booster seat with backrest (Volvo Booster Seat with backrest).

Type approval: E1 04301169

(UF)

Volvo booster seat with backrest (Volvo Booster Seat with backrest).

Type approval: E1 04301169

(UF)

Group 2/3

15-36 kg

Booster cushion with and without backrest (Booster Cushion with and without backrest).

Type approval: E5 03139

(UF)

Booster cushion with and without backrest (Booster Cushion with and without backrest).

Type approval: E5 03139

(UF)

Booster cushion with and without backrest (Booster Cushion with and without backrest).

Type approval: E5 03139

(UF)

01 Safety

Child safety 01

37

Weight Front seat (with deactivated air- bag)

Outer rear seat Centre rear seat

Group 2/3

15-36 kg

Integrated booster cushion (Integrated Booster Cushion) - available as a fac- tory fitted option.

Type approval: E5 04189

(B)

L: Suitable for specific child seats. These child seats may be intended for use in a special car model, limited or semi-universal categories.

U: Suitable for universally approved child seats in this weight class.

UF: Suitable for front-facing universally approved child seats in this weight class.

B: Built-in child seats approved for this weight class.

01 Safety

Child safety 01

38 * Option/accessory, for more information, see Introduction.

Integrated two-stage booster cushions*

Correct position, the seatbelt should be posi- tioned in on the shoulder.

Incorrect position, the head restraint must be adjusted as high as the head and the seatbelt must not be below the shoulder.

The booster cushions are specially designed to provide optimum safety. In combination with the seatbelt they are approved for children who weigh between 15 and 36 kg and who are at least 95 cm in height.

Check before driving that:

the integrated 2-stage booster cushion is correctly set (see table page 38) and in locked position

the seatbelt is in contact with the child's body and is not slack or twisted

the seatbelt does not lie across the child's throat or below the shoulder (see preced- ing illustrations)

the lap section of the seatbelt is positioned low over the pelvis to provide optimal pro- tection.

For instructions on adjusting the booster cush- ion's two levels, see pages 3839.

Raising the two-stage booster cushion

The integrated booster cushion can be folded up into two stages. How many stages the cush- ion should be folded up depends on the child's weight.

Stage 1 Stage 2

Weight 22-36 kg 15-25 kg

Stage 1

Pull the handle forward and up in order to release the booster cushion.

Press the booster cushion backwards to lock.

01 Safety

Child safety 01

39

Stage 2

Start from the lower stage. Press the but- ton.

Lift the booster cushion up at the front edge and press it back against the backrest to lock.

WARNING

Volvo recommends that repair or replace- ment is only carried out by an authorised Volvo workshop. Do not make any modifi- cations or additions to the booster cushion. If an integrated booster cushion has been subjected to a major load, such as in con- junction with a collision, the entire booster cushion must be replaced. Even if the booster cushion appears to be undamaged, it may not afford the same level of protec- tion. The booster cushion must also be replaced if it is heavily worn.

NOTE

It is not possible to adjust the booster cush- ion from stage 2 to stage 1. It must first be reset by being fully folded into the seat cushion. Refer to the heading below, Low- ering the two-stage booster cushion.

Lowering the two-stage booster cushion

Lowering can take place from both the upper and lower stage to fully lowered position in the cushion. However, it is not possible to adjust

the booster cushion from the upper stage to the lower stage.

Pull the handle forwards to release the cushion.

01 Safety

Child safety 01

40

Press down with your hand in the centre of the cushion in order to lock it.

WARNING

If the instructions regarding the two-stage booster cushion are not followed then this could cause serious injury to a child in the event of an accident.

IMPORTANT

Check that there are no loose objects (e.g. toys) left behind in the space under the cushion before lowering.

NOTE

The booster cushion must be lowered first when lowering the backrest.

Child safety locks, rear doors

The controls for operating the rear door power windows and the rear door opening handles can be blocked from opening from the inside. For more information, see page 62.

ISOFIX fixture system for child seats

Mounting points for the ISOFIX fixture system are concealed behind the lower section of the rear seat backrest, in the outer seats.

The location of the mounting points is indicated by symbols in the backrest upholstery (see pre- ceding illustration).

Press the seat cushion down to access the mounting points.

Always follow the manufacturer's installation instructions when connecting a child seat to the ISOFIX mounting points.

Size classes

Child seats are in different sizes cars are in different sizes. This means that not all child seats are suitable for all seats in all car models.

Consequently, there is a size classification for child seats using the ISOFIX fixture system in order to assist users in choosing the correct child seat (see the following table).

Size class

Description

A Full size, front-facing child seat

B Reduced size (alt. 1), front- facing child seat

B1 Reduced size (alt.2), front- facing child seat

C Full size, rear-facing child seat

D Reduced size, rear-facing child seat

E Rear-facing infant seat

F Transverse infant seat, left- hand

G Transverse infant seat, right- hand

01 Safety

Child safety 01

41

WARNING

Never place a child in the passenger seat if the car is equipped with an activated airbag.

NOTE

If an ISOFIX child seat has no size classifi- cation then the car model must be included on the child seat's vehicle list.

NOTE

Volvo recommends that you contact an authorised Volvo dealer for recommenda- tions about which ISOFIX child seats Volvo recommends.

Types of ISOFIX child seat

Type of child seat Weight Size class Passenger seats for ISOFIX installation of child seats

Front seat Outer rear seat

Infant seat transverse max 10 kg F X X

G X X

Infant seat, rear-facing max 10 kg E X OK

(IL)

Infant seat, rear-facing max 13 kg E X OK

(IL)

D X OK

(IL)

C X OK

(IL)

01 Safety

Child safety 01

42

Type of child seat Weight Size class Passenger seats for ISOFIX installation of child seats

Front seat Outer rear seat

Child seat, rear-facing 9-18 kg D X OK

(IL)

C X OK

(IL)

Front-facing child seat 9-18 kg B X OKA

(IUL)

B1 X OKA

(IUL)

A X OKA

(IUL)

X: The ISOFIX position is not suitable for ISOFIX child seats in this weight class and/or size class.

IL: Suitable for specific ISOFIX child seats. These child seats may be intended for use in a special car model, limited or semi-universal categories.

IUF: Suitable for front-facing ISOFIX child seats that are universally approved in this weight class.

A Volvo recommends rear-facing child seats for this group.

01 Safety

Child safety 01

43

Upper mounting points for child seats

The car is equipped with upper mounting points for certain front-facing child seats. These mounting points are located on the rear of the seat.

The upper mounting points are primarily intended for use with front-facing child seats. Volvo recommends that small children should sit in rear-facing child seats to as late an age as possible.

NOTE

Fold the head restraints in order to facilitate fitting this type of child seat in cars with folding head restraints on the outer seats.

NOTE

For cars equipped with a cargo area cover over the cargo area, this must be removed before a child seat can be fitted in the mounting points.

For detailed information on how the child seat should be tensioned in the upper mounting points, see the seat manufacturer's instruc- tions.

WARNING

The child seat's straps must always be drawn through the hole in the head restraint leg before they are tensioned at the attach- ment point.

44 * Option/accessory, for more information, see Introduction.

Remote control key/key blade................................................................ 46 Battery replacement, remote control key/PCC*...................................... 51 Keyless drive*.......................................................................................... 53 Locking/unlocking................................................................................... 56 Child safety locks.................................................................................... 62 Alarm*...................................................................................................... 63

LOCKS AND ALARM

02 Locks and alarm

Remote control key/key blade

02

46

General

The car is supplied with 2 remote control keys or PCCs (Personal Car Communicator). They are used to start the car and for locking and unlocking.

Additional remote control keys can be ordered - up to 6 can be programmed and used for the same car.

The remote control key contains a removable key blade made of metal. The visible section is available in two versions so that it is possible to distinguish between the remote control keys.

The PCC has increased functionality com- pared with the remote control key. The contin- uation of this chapter describes the functions available in both the PCC and the remote con- trol key.

WARNING

If there are children in the car:

Remember to switch off the supply to the power windows and sunroof by removing the remote control key if the driver leaves the car.

Loss of a remote control key

If you lose a remote control key then a new one can be ordered at a workshop - an authorised Volvo workshop is recommended. The remain- ing remote control keys must then be taken to the workshop. The code of the missing remote control key must be erased from the system as a theft prevention measure.

The current number of keys registered to the car can be checked in the menu system MY

CAR under Information Number of keys. For a description of the menu system, see page 200.

Key memory1 door mirrors and driver's

seat

The settings are automatically connected to each respective remote control key, see pages 81 and 103.

The function can be activated/deactivated in the menu system MY CAR under Settings

Car settings Car key memory.

For a description of the menu system, see page 200.

For cars with the Keyless drive system, see page 53.

Indicator for locking/unlocking

When the car is locked or unlocked using the remote control key, the direction indicators confirm that locking/unlocking was correctly performed.

Locking - one flash and the door mirrors are folded2 in.

Unlocking - two flashes and the door mir- rors are folded2 out.

After locking the indication is only given if all locks have been activated once the doors have been closed.

Selecting the function

Different options for indicating locking/unlock- ing with light can be set in the car's menu sys- tem, see page 200.

Search in the menu system MY CAR for Settings Car settings Light settings

and select Door lock confirmation light and/ or Unlock confirmation light.

Immobiliser

Each remote control key has a unique code. The car can only be started with the correct remote control key with the correct code.

1 Only in combination with power driver's seat and power mirrors. 2 Only for cars with retractable power door mirrors.

02 Locks and alarm

Remote control key/key blade

02

47

The following error messages in the combined instrument panel's information display are rela- ted to the electronic immobiliser:

Message Specification

Insert car key Error when reading the remote control key during starting - Remove the key from the ignition switch, press it in again and make a new start attempt.

Car key not found Error reading the remote control key during starting - Try to start again.

If the error persists: Insert the remote control key into the ignition switch and try to start again.

Immobiliser Try

start again

Error in immobiliser system during star- ting. If the error per- sists: Contact a workshop - an authorised Volvo workshop is recom- mended.

For starting the car, see page 114.

Functions

Remote control key, standard version.

Locking

Unlocking

Approach light duration

Tailgate

Panic function

02 Locks and alarm

Remote control key/key blade

02

48 * Option/accessory, for more information, see Introduction.

Remote control key with PCC* - Personal Car Communicator.

Information

Function buttons

Locking Locks the doors and tailgate while the alarm is activated.

Press and hold (at least 2 seconds) to close all the windows and sunroof* simultaneously.

WARNING

If the sunroof and windows are closed using the remote control key, check that no one is in danger of getting hands caught.

Unlocking Unlocks the doors and tail- gate while the alarm is deactivated.

Press and hold (at least 4 seconds) to open all windows simultaneously.

The function can be changed from unlocking all doors simultaneously, to unlocking the driv- er's door only with one press of the button and, after a further press of the button - within 10 seconds - unlocking the remaining doors.

The function can be changed in the menu sys- tem MY CAR under Settings Car settings

Lock settings Doors unlock with both the alternatives All doors and Driver door,

then all. For a description of the menu system, see page 200.

Approach light duration Used to switch on the car's lighting at a distance. For more information, see page 94.

Tailgate - Unlocks and disarms the alarm for the tailgate only. On cars with power tail- gate* the tailgate is opened after the button is kept depressed. For more information, see page 58.

Panic function Used to attract attention in an emergency.

Press and hold the button for at least 3 sec- onds or press it twice within 3 seconds to acti- vate the direction indicators and the horn.

The function can be turned off with the same button once it has been active for at least

5 seconds. Otherwise the function switches off automatically after 2 minutes and 45 seconds.

Range

The remote control key's functions have a range of about 20 m from the car.

If the car does not verify a button being pressed - move closer and try again.

NOTE

The remote control key functions can be disrupted by surrounding radio waves, buildings, topographical conditions etc. The car can always be locked/unlocked using the key blade, see page 50.

If the remote control key is removed from the car when the engine is running or key position I or II is active (see page 78) and if all doors are closed, then a warning message is shown in the information display and an audible reminder signal sounds at the same time.

The warning message clears and the audio reminder signal stops when the remote control key is brought back to the car after:

The remote control key has been inserted in the ignition switch

Speed exceeds 30 km/h

the OK button has been pressed.

02 Locks and alarm

Remote control key/key blade

02

* Option/accessory, for more information, see Introduction. 49

Unique PCC functions*

Remote control key with PCC* - Personal Car Communicator.

Information button

Indicator lamps

Using the information button enables access to certain information from the car via the indica- tor lamps.

Using the information button

Press the information button .

> All indicator lamps flash for approxi- mately 7 seconds and the light travels around on the PCC. This indicates that information from the car has been read.

If any of the other buttons are pressed during this time then the reading is inter- rupted.

NOTE

If none of the indicator lamps illumi- nates with repeated use of the information button and in different locations (as well as after 7 seconds and after the light has trav- elled around on the PCC), contact a work- shop - an authorised Volvo workshop is rec- ommended.

Indicator lamps display information in accord- ance with the following illustration:

Green continuous light the car is locked.

Yellow continuous light the car is unlocked.

Red continuous light the alarm has been triggered since the car was locked.

Red light flashing alternately in both indi- cator lamps The alarm was triggered less than 5 minutes ago.

Range PCC

The PCC's range for locking, unlocking and tailgate is about 20 m from the car - for other functions up to about 100 m.

If the car does not verify a button being pressed - move closer and try again.

NOTE

The information button functions can be disrupted by surrounding radio waves, buildings, topographical conditions etc.

Out of PCC range

If the PCC is too far away from the car for the information to be read then the status the car was last left in is shown, without the light trav- elling around on the PCC.

If several PCCs are used for the car then it is only the PCC last used for locking/unlocking that shows correct status.

02 Locks and alarm

Remote control key/key blade

02

50 * Option/accessory, for more information, see Introduction.

NOTE

If no indicator lamps illuminate when the information button is used within range then this may be because the last commu- nication between the PCC and the car was disrupted by surrounding radio waves, buildings, topographical conditions etc.

Detachable key blade

A remote control key contains a detachable key blade of metal with which some functions can be activated and some operations carried out.

The key blade's unique code is provided by authorised Volvo workshops, which are rec- ommended when ordering new key blades.

Key blade functions

Using the remote control key's detachable key blade:

the driver's door can be opened manually if central locking cannot be activated with the remote control key, see page 54.

the rear doors' mechanical child safety locks can be activated/deactivated, see page 62.

access to the glovebox can be blocked.

the airbag for front passenger seat (PACOS)* can be activated/deactivated, see page 22.

Removing the key blade

Slide the spring-loaded catch to the side.

At the same time pull the key blade straight out backwards.

Attaching the key blade

Carefully refit the key blade into its location in the remote control key.

1. Hold the remote control key with the slot pointed up and lower the key blade into its slot.

2. Lightly press the key blade. You should hear a "click" when the key blade is locked in.

Unlocking doors with the key blade

If central locking cannot be activated with the remote control key - e.g. if the batteries are discharged - then the driver's door can be opened as follows:

1. Unlock the driver's door with the key blade in the door handle's lock cylinder.

See also the illustration and further infor- mation see page 54.

NOTE

When the door has been unlocked using the key blade and is opened, the alarm is trig- gered.

2. Deactivate the alarm by inserting the remote control key in the ignition switch.

For a car with the Keyless system, see page 54.

02 Locks and alarm

Battery replacement, remote control key/PCC*

02

* Option/accessory, for more information, see Introduction. 51

Replacing the battery

The batteries should be replaced if:

the information symbol is illuminated and the display shows Low battery in remote

control. Please change batteries.

and/or

the locks repeatedly do not react to signals from the remote control key within 20 metres from the car.

Opening

Slide the spring-loaded catch to the side.

At the same time pull the key blade straight out backwards.

Insert a 3 mm slot screwdriver in the hole behind the spring-loaded catch and gently prize the remote control key up.

NOTE

Turn the remote control key over with the buttons facing up, this is to avoid the bat- teries falling out when it is opened.

IMPORTANT

Avoid touching the battery and its terminals with your fingers, as this could damage their functionality.

Battery replacement

Closely study how the battery/batteries are secured on the inside of the cover, with regard to their (+) and () sides.

Remove control key (1 battery)

1. Carefully prize out the battery. 2. Install a new one with the (+) side down.

PCC* (2 batteries)

1. Carefully prize out the batteries. 2. First install one new one with the (+) side

up. 3. Position the white plastic tab in between

and finally install a second new battery with the (+) side down.

Battery type

Use batteries with the designation CR2430, 3V - one in the remote control key and two in the PCC.

Assembly

1. Press the remote control key together.

2. Hold the remote control key with the slot pointed up and lower the key blade into its slot.

3. Lightly press the key blade. You should hear a "click" when the key blade is locked in.

02 Locks and alarm

Battery replacement, remote control key/PCC*

02

52 * Option/accessory, for more information, see Introduction.

IMPORTANT

Make sure that you dispose of old batteries in an environmentally-friendly way.

02 Locks and alarm

Keyless drive*

02

* Option/accessory, for more information, see Introduction. 53

Keyless lock and ignition system (only

PCC1)

General

The keyless drive function in the PCC allows the car to be unlocked, driven and locked with- out the need for a key. You simply have to have the PCC with you. The system makes it easier and more convenient to open the car, e.g. when your hands are full.

Both of the car's PCCs incorporate the Keyless function. Additional PCCs can be ordered, see page 46.

PCC range

In order to open a door or the tailgate, a PCC must be no more than approx. 1.5 metres from

the car door handle or tailgate. This means that the person who wishes to lock or unlock a door must have the PCC with him or her. It is not possible to lock or unlock a door if the PCC is on the opposite side of the car.

The red rings in the preceding illustration indi- cate the range covered by the system's anten- nas.

If all PCCs are removed from the car when the engine is running or key position I or II is active (see page 78) and if all doors are closed, then a warning message is shown in the information display and an audible reminder signal sounds at the same time.

The warning message clears and the audio reminder signal stops when the PCC is brought back to the car after:

a door has been opened and closed

the PCC is inserted into the ignition switch

the OK button has been pressed.

Handling the PCC safely

If a PCC with keyless drive function is left in the car, it is deactivated temporarily when the car is locked. This prevents unauthorised entry.

However, if someone breaks into the car, opens the door and finds the PCC, it can be

reactivated. It is therefore important to handle all PCCs with great care.

IMPORTANT

Never leave a PCC behind in the car.

Interference to PCC function

Electromagnetic fields and screening can inter- fere with the keyless drive system.

NOTE

Do not place/store the PCC near a mobile phone or metal object - no closer than 10-15 cm.

If interference is experienced nonetheless, use the PCC and the key blade as a remote control key, see page 47.

1 Personal Car Communicator, see page 49.

02 Locks and alarm

Keyless drive*

02

54 * Option/accessory, for more information, see Introduction.

Locking

Cars with the keyless system have a button on the outside door handles.

Lock the doors and the tailgate by pressing the lock button on one of the door handles on the outside.

All doors and the tailgate must be closed before the car can be locked - otherwise the car is not locked.

NOTE

On cars with automatic transmission, the gear selector must be set in the P position otherwise the car cannot be locked or the alarm armed.

Unlocking

Unlocking takes place when a hand grasps a door handle or the tailgate's rubberised pres- sure plate is actuated - open the door or tail- gate as normal.

Unlocking with the key blade

Hole for key blade - to loosen the cover.

If central locking cannot be activated with the PCC, e.g. if the batteries are discharged, then the left-hand front door can be opened with the PCC's detachable key blade (see page 50)

To access the lock cylinder, the door handle's plastic cover must be removed - this is also done with the key blade:

1. Press the key blade approx. 1 cm straight up into the hole on the underside of the door handle/cover - do not prize. > The plastic cover loosens automatically

by means of the torque when the blade is pushed straight up and into the open- ing.

2. Then insert the key blade in the lock cylin- der and unlock the door.

3. Refit the plastic cover after unlocking.

NOTE

When the driver's door is unlocked using the key blade and is opened, the alarm is trig- gered. It is switched off by inserting the PCC in the ignition switch, see page 64.

Key memory2 driver's seat and door

mirrors

PCC memory function

If several people each with a PCC approach the car, then the settings for seat and mirrors are implemented for the person who opens the driver's door.

After the driver's door has been opened by person A with PCC-A, but person B with PCC-

2 Only in combination with power driver's seat and power mirrors.

02 Locks and alarm

Keyless drive*

02

* Option/accessory, for more information, see Introduction. 55

B shall drive, the settings can be changed in three ways:

Standing by the driver's door, or sitting behind the steering wheel, person B presses their PCC's unlock button, see page 47.

Select one of three possible memories for seat adjustment with seat button 1-3, see page 81.

Adjust seat and mirrors manually, see page 81 and 103.

Lock settings

The Keyless function can be adapted by indi- cating in the menu system MY CAR which doors shall be unlocked, under Car settings

Lock settings Keyless entry - there select between All doors unlock, Any door, Doors on same side and Both front doors.

For a description of the menu system, see page 200.

Antenna location

The keyless system has a number of integrated antennae located around the car:

Tailgate, by wiper motor

Door handle, left rear

Cargo area, central and furthest in under the floor

Door handle, right rear

Centre console, under the rear section

Centre console, under the front section.

WARNING

People with pacemaker operations should not come closer than 22 cm to the keyless system's antennae with their pacemaker. This is to prevent interference between the pacemaker and the keyless system.

02 Locks and alarm

Locking/unlocking

02

56 * Option/accessory, for more information, see Introduction.

From the outside

The remote control key can lock/unlock all doors and the tailgate simultaneously. Different sequences for unlocking can be selected, see "Unlocking with the remote control key" page 48.

In order that the lock sequence can be acti- vated, the driver's door must be closed - if any of the other doors or the tailgate is open, then it/they is/are locked and the alarm is activated only when it/they are closed. With the Key- less* system all the doors and tailgate must be closed.

NOTE

Be aware of the risk of locking the remote control key in the car.

If it is not possible to lock/unlock with the remote control key, the battery may be dis- charged - lock or unlock the driver's door with the detachable key blade, see page 50.

NOTE

Remember that the alarm is triggered when the door is opened after being unlocked with the key blade - the alarm is switched off when the remote control key is inserted into the ignition switch.

WARNING

Be aware of the risk of being locked in the car when it is locked from the outside using the remote control key - it is then not pos- sible to open any of the doors from the inside with the door controls. Read more about this in the section "Deadlocks" later on.

Automatic relocking

If none of the doors or the tailgate is opened within 2 minutes of unlocking, all are locked again automatically. This function reduces the risk that the car is left unlocked unintentionally. (For cars with alarm, see page 63.)

From the inside

Central locking

Central locking.

All of the doors and the tailgate can be locked or unlocked simultaneously using the central locking button on either front door.

Press one side of the button to lock - the other side to unlock.

Unlocking

A door can be unlocked from the inside in two different ways:

Press the central locking button .

Press and hold (at least 4 seconds) to also open all the side windows* simultaneously.

02 Locks and alarm

Locking/unlocking

02

* Option/accessory, for more information, see Introduction. 57

Pull the door handle once and release - the door is unlocked. Pull the door handle again to open the door.

Locking

Press the central locking button after the front doors have been closed.

Press and hold (at least 2 seconds) to also close all the side windows and the sunroof* simultaneously.

All doors can also be individually locked man- ually with their lock buttons - the door in ques- tion must then be closed.

Global opening

Press and hold the central locking button (at least 4 seconds) to also open all the win- dows simultaneously - for example, to quickly ventilate the passenger compartment during hot weather.

Automatic locking

The doors and tailgate are locked automati- cally when the car starts to move.

The function can be activated/deactivated in the menu system MY CAR under Settings

Car settings Lock settings Automatic

door locking. For a description of the menu system, see page 200.

Glovebox

The glovebox can only be locked/unlocked using the remote control key's detachable key blade. For information on the key blade, see page 50.

Locking the glovebox:

Insert the key blade in the glovebox lock cylinder.

Turn the key blade 90 degrees clockwise. The keyhole is horizontal in the locked position.

Pull out the key blade.

Unlock by carrying this out in reverse order.

Tailgate

Manual opening

Rubber plate with electrical contact.

The tailgate is held closed by an electrical lock. To open:

1. Push down gently on the rubberised pres- sure plate under the outer handle - the lock is released.

2. Lift the outside handle in order to fully open the tailgate.

02 Locks and alarm

Locking/unlocking

02

58 * Option/accessory, for more information, see Introduction.

IMPORTANT

Minimal force is required to release the rear hatch lock - just gently press the rubberised panel.

Do not place the lift force on the rubber panel when opening the rear hatch - lift the handle. Using too much force may damage the electrical contact for the rubber panel.

Unlocking with the remote control key

The alarm for the tailgate can be disarmed* and the tailgate unlocked on its own by using the remote control key's button.

If the car is equipped with an alarm* the alarm indicator on the instrument panel stops to show that alarm for the whole of the car is not

armed. The alarm's level and movement sen- sors and the sensors for opening the tailgate are disconnected.

The doors remain locked and armed.

The tailgate is unlocked, but remains closed - press lightly on the rubberised pressure plate under the outer handle and lift the tailgate.

If the tailgate is not opened within 2 minutes then it is relocked and the alarm is re-armed.

Unlocking the car from inside

To unlock the tailgate:

Press the lighting panel button (1). > The tailgate is unlocked and can be

opened within 2 minutes (if the car is locked from the inside).

Locking with the remote control key

Press the remote control key's button for locking, , see page 47.

> If the car is equipped with an alarm* the alarm indicator on the instrument panel starts to flash, which means that the alarm is armed.

Power operated tailgate*

G 03

19 65

NOTE

Consider the roof height when using elec- trical operation. Do not use electrical oper- ation of the tailgate under a low roof height, see under the heading "Interrupt opening/ closing of tailgate".

02 Locks and alarm

Locking/unlocking

02

59

NOTE

If the system has been operating con- tinuously for a long time, it is switched off to avoid overload. It can be used again after about 2 minutes.

If the battery has been discharged or disconnected then the tailgate must be opened and closed again to reset the system.

Programmable max. opening

Tailgate maximum opening position can be programmed. Can be used for e.g. low roof height in a garage. Proceed as follows:

Open the tailgate manually, hold it in the desired position and give the button on the tailgate one long press (at least 3 seconds) and then release the tailgate - the pro- gramming is complete.

To clear the programming - move the tail- gate manually to a higher position.

Snow and wind

If the tailgate is forced down by something just when it is being opened, e.g. snow, ice or strong wind, and this causes the tailgate to lower, then it is closed automatically.

Pinch protection

If something with sufficient resistance prevents the tailgate from opening/closing then the pinch protection is activated.

During opening - power tailgate operation is deactivated and the tailgate is disen- gaged.

When closing - the tailgate stops and backs off from the obstacle a couple of centimetres.

WARNING

Pay attention to the risk of crushing when opening/closing. Before starting to open/ close; make sure that there is nobody close to the tailgate as a crushing injury could have serious consequences.

Always operate the tailgate with caution.

Opening the tailgate

The tailgate can be opened three ways (two of which involve this but-

ton):

Long press on the button in the lighting panel - hold the button depressed until the tailgate starts to open.

Long press on the button on the remote control key - hold the button depressed until the tailgate starts to open.

Push down gently on the rubberised pres- sure plate under the outer handle.

Closing the tailgate

Close using this button on the tailgate or manually.

Press the button the tailgate closes auto- matically.

Stop the opening/closing of the tailgate

This can be done four ways (of which three involve this button):

Press the lighting panel button

Press the remote control key button

Press the tailgate's button

Press the rubberised pressure plate beneath the outside handle.

- The tailgate's movement is interrupted and it stops.

02 Locks and alarm

Locking/unlocking

02

60 * Option/accessory, for more information, see Introduction.

Manual tailgate operation

The system is disengaged if the opening/clos- ing sequence is interrupted in accordance with the preceding section.

The tailgate can then be operated man- ually.

Deadlocks*1

Deadlocks means that all lock buttons and door handles are mechanically disengaged, which prevents doors being opened from the inside.

The deadlocks are activated with the remote control key and are set after an approximately 10 second delay after the doors have been locked.

NOTE

If a door is opened within the delay time then the sequence is interrupted and the alarm is deactivated.

The car can only be unlocked from a deadlock state with the remote control key. The front left door can also be unlocked with the detachable key blade.

WARNING

Do not allow anyone to remain in the car without first deactivating the deadlocks in order to avoid the risk of anyone being locked in.

Temporary deactivation

Active menu options are indicated with a cross.

MY CAR

OK MENU

TUNE knob control

EXIT

If someone is going to stay in the car but the doors must be locked from the outside, then

the deadlocks function can be temporarily switched off. This is carried out as follows:

1. Access the menu system MY CAR under Settings Car settings Reduced

Guard (for a detailed description of the menu system, see page 200).

2. Select Activate once. > The instrument panel display shows the

message Reduced guard See

manual and the deadlocks function is switched off when the car is locked.

or

Select Ask when exiting. > Each time the engine is switched off the

centre console display screen shows the message Activate Reduced Guard

until engine has started again? fol- lowed by the alternatives Confirm with

OK and Cancel with EXIT.

If the deadlocks function shall be switched

off

Press OK/MENU and lock the car. (Note that the alarm's movement and tilt detec- tors* are switched off at the same time, see page 64.)

1 Only in combination with alarm.

02 Locks and alarm

Locking/unlocking

02

61

> The next time the engine is started, the system is reset to zero and the instru- ment panel display shows the message Full guard at which the deadlocks function and the alarm's movement and tilt detectors are re-engaged.

If the locking system shall not be changed

Press EXIT and lock the car.

NOTE

Remember that the alarm is activated when the car is locked.

If any of the doors are opened from the inside then the alarm is triggered.

02 Locks and alarm

Child safety locks

02

62 * Option/accessory, for more information, see Introduction.

Manual blocking of the rear doors

The child safety locks prevent children from opening a rear door from the inside.

G 02

10 77

The child safety locks are located on the trailing edge of the rear doors and are only accessible when the doors are open.

To activate/deactivate the child safety locks:

Use the remote control key's detachable key blade to turn the knob - see page 50.

The door is blocked against opening from the inside.

The door can be opened from both the outside and the inside.

NOTE

A door's knob control only blocks that particular door - not both rear doors simultaneously.

Cars with an electric child safety lock do not have a manual child lock.

Electrical locking of the rear doors* and power windows

Control panel driver's door.

The child safety locks can be activated/deac- tivated in all key positions higher than 0 - see page 78. Activation/deactivation can be per- formed up to 2 minutes after switching off the engine, provided that no door is opened.

To activate the child safety locks:

1. Start the engine or choose a key position higher than 0.

2. Press the button in the driver's door control panel. > The information display shows the mes-

sage Rear child locks Activated and the button's lamp illuminates - the locks are active.

When the electric child safety lock is active then the rear:

windows can only be opened with the driv- er's door control panel

doors cannot be opened from inside.

The current setting is stored when the engine is switched off - if the child safety locks are activated at engine shutdown, the function will remain activated the next time the engine is started.

02 Locks and alarm

Alarm*

02

* Option/accessory, for more information, see Introduction. 63

General

Activated alarm is triggered if:

a door, the bonnet or the tailgate is opened

a movement is detected in the passenger compartment (if fitted with a movement detector*)

the car is raised or towed away (if fitted with a tilt detector*)

the battery's cable is disconnected

the siren is disconnected.

If there is a fault in the alarm system, the infor- mation display shows a message. In which case, contact a workshop - an authorised Volvo workshop is recommended.

NOTE

The movement sensors trigger an alarm in the event of movement in the passenger compartment - air currents are also regis- tered. For this reason the alarm is triggered if the car is left with a window or the sunroof open or if the passenger compartment heater is used.

To avoid this: Close the window/sunroof when leaving the car. If the car's integrated passenger compartment heater (or a porta- ble electric heater) shall be used - direct the airflow from the air vents so that they are not pointing upwards in the passenger com- partment.

NOTE

One of the detectors for the alarm is located under the cup holder in the centre console. This detector is sensitive for metals.

Avoid storing coins, keys or similar metal objects in the centre console's cup holder as such objects could accidentally trigger the alarm.

NOTE

Do not attempt to repair or modify alarm system components. All such attempts could affect the terms of insurance.

Alarm indicator

A red LED on the instrument panel indicates the alarm system's status:

LED not lit Alarm not armed

The LED flashes once every other second Alarm is armed

The LED flashes rapidly after disarming the alarm (and until the remote control key is inserted in the ignition switch and key posi- tion I is selected) Alarm has been trig- gered.

Arming the alarm

Press the remote control key lock button.

Deactivate the alarm

Press the remote control key unlock but- ton.

02 Locks and alarm

Alarm*

02

64 * Option/accessory, for more information, see Introduction.

Deactivating a triggered alarm

Press the remote control key unlock button or insert the remote control key in the igni- tion switch.

Other alarm functions

Automatic re-arming of the alarm

This function prevents the car being left with the alarm disarmed unintentionally.

If the car is unlocked with the remote control key (and the alarm is disarmed) but none of the doors or the tailgate is opened within 2 minutes, then the alarm is automatically re- armed. The car is relocked at the same time.

Remote control key not working

If the alarm cannot be deactivated with the remote control key, e.g. if the key's battery is discharged - the car can be unlocked, dis- armed and the engine started as follows:

1. Open the driver's door with the detachable key blade - see page 54. > The alarm is triggered, the alarm indica-

tor flashes rapidly and the siren sounds.

2. Insert the remote control key in the ignition switch. > The alarm is deactivated and the alarm

indicator goes out.

3. Start the engine.

Alarm signals

When the alarm is triggered, the following hap- pens:

A siren sounds for 30 seconds or until the alarm is switched off. The siren has its own battery and works independently of the car battery.

The direction indicators flash for 5 minutes or until the alarm is switched off.

Reduced alarm level

To avoid accidental triggering of the alarm - e.g. if a dog is left in a locked car or during transport on a car train or car ferry - temporarily deactivate the movement and tilt detectors.

The procedure is the same as with the tempo- rary disengaging of deadlocks, see page 60.

02 Locks and alarm

02

65

66 * Option/accessory, for more information, see Introduction.

Instruments and controls........................................................................ 68 Volvo Sensus ......................................................................................... 77 Key positions.......................................................................................... 78 Seats....................................................................................................... 80 Steering wheel........................................................................................ 85 Lighting................................................................................................... 86 Wipers and washing................................................................................ 98 Windows, rearview and door mirrors.................................................... 101 Compass*.............................................................................................. 106 Power panorama roof* ......................................................................... 107 Alcolock*............................................................................................... 110 Starting the engine................................................................................ 114 Starting the engine external battery................................................... 119 Gearboxes............................................................................................. 120 DRIVe Start/Stop*................................................................................. 126 All-wheel drive AWD*......................................................................... 132 Foot brake............................................................................................. 133 HDC Hill Descent Control..................................................................... 135 Parking brake........................................................................................ 137

HomeLink *.......................................................................................... 141

YOUR DRIVING ENVIRONMENT

03 Your driving environment

Instruments and controls

03

68

Instrument overview

Left-hand drive.

03 Your driving environment

Instruments and controls

03

* Option/accessory, for more information, see Introduction. 69

Function Page

Menus and messages, direction indicators, main/dipped beam, trip computer

87, 92, 198, 222

Cruise control 150, 152

Horn, airbags 20, 85

Combined instrument panel

71, 75

Menu, audio and phone control

200, 234, 261, 236

START/STOP ENGINE button

114

Ignition switch 78

Display for infotainment and menus

200, 237, 236

Door handle

Control panel 56, 62, 101, 103

Hazard warning flashers 92

Function Page

Control for infotainment and menu control

200, 236

Control panel for climate control

208

Gear selector 120

Controls for active chas- sis (Four-C)*

224

Wipers and washing 98, 99

Steering wheel adjust- ment

85

Bonnet opener 332

Parking brake 137

Headlamp control, opener for fuel filler flap and tailgate

57, 86, 295

Seat adjustment* 81

03 Your driving environment

Instruments and controls

03

70

Right-hand drive.

03 Your driving environment

Instruments and controls

03

* Option/accessory, for more information, see Introduction. 71

Function Page

Display for infotainment and menus

200, 237, 236

Ignition switch 78

START/STOP ENGINE button

114

Cruise control 150, 152

Combined instrument panel

71, 75

Horn, airbags 20, 85

Menu, audio and phone control

200, 234, 261, 236

, , ,

Wipers and washing 98, 99

Door handle

Control panel 56, 62, 101, 103

Seat adjustment* 81

Function Page

Headlamp control, opener for fuel filler flap and tailgate

57, 86, 295

Parking brake 137

Bonnet opener 332

Steering wheel adjust- ment

85

Menus and messages, direction indicators, main/dipped beam, trip computer

87, 92, 198, 222

Gear selector 120

Controls for active chas- sis (Four-C)*

224

Control panel for climate control

208

Control for infotainment and menu control

200, 236

Hazard warning flashers 92

Information displays

The combined instrument panel's information displays show information on some of the car's functions, e.g. cruise control, trip computer and messages. The information is shown with text and symbols.

There are further descriptions under the func- tions that use the information displays.

03 Your driving environment

Instruments and controls

03

72 * Option/accessory, for more information, see Introduction.

Meters

Meters in the combined instrument panel.

Speedometer

Fuel gauge. See also Trip computer, page 222, and Refuelling, page 295.

Tachometer. The meter indicates engine speed in thousands of revolutions per minute (rpm).

Indicator and warning symbols

Indicator and warning symbols.

Main beam and direction indicator symbol

warning symbols1

Symbol for DRIVe - Start/Stop*, see page 126

Indicator symbols

Functionality check

All indicator and warning symbols illuminate in key position II or when the engine is started. When the engine has started, all the symbols should go out except the parking brake sym- bol, which only goes out when the brake is dis- engaged.

If the engine does not start or if the functionality check is carried out in key position II then all symbols go out after 5 seconds except the symbol for faults in the car's emissions system and the symbol for low oil pressure.

Indicator symbols

Symbol Specification

ABL fault

Emissions system

ABS fault

Rear fog lamp on

Stability system

Stability system, sport mode

Engine preheater (diesel)

Low level in fuel tank

Information, read display text

1 For certain engine variants, the symbol for low oil pressure is not used. Warnings are made via display text. For information on checking the oil level, see page 333.

03 Your driving environment

Instruments and controls

03

* Option/accessory, for more information, see Introduction. 73

Symbol Specification

Main beam On

Left-hand direction indicators

Right-hand direction indicators

DRIVe - Start/Stop*, the engine auto-stopped, see page 126

Not used

ABL fault

The symbol illuminates if a fault has arisen in the ABL function (Active Bending Lights).

Emissions system

If the symbol illuminates then it may be due to a fault in the car's emissions system. Drive to a workshop for checking. Volvo recommends that you seek assistance from an authorised Volvo workshop.

ABS fault

If this symbol illuminates then the system is not working. The car's regular brake system con- tinues to work, but without the ABS function.

1. Stop the car in a safe place and turn off the engine.

2. Restart the engine.

3. If the symbol remains illuminated, drive to a workshop to have the ABS system checked. Volvo recommends that you seek assistance from an authorised Volvo workshop.

Rear fog lamp on

This symbol illuminates when the rear fog lamp is on. There is only one fog lamp. It is located on the driver's side.

Stability system

A flashing symbol indicates that the stability system is operating. If the symbol illuminates with constant glow then there is a fault in the system.

Stability system, Sport mode

Sport mode allows for a more active driving experience. The system then detects whether the accelerator pedal, steering wheel move- ments and cornering are more active than in normal driving and then allows controlled skid- ding of the rear section up to a certain level before it intervenes and stabilises the car.

Engine preheater (diesel)

This symbol illuminates during engine preheat- ing. Preheating takes place mostly due to low temperature.

Low level in fuel tank

When the symbol illuminates the level in the fuel tank is low, refuel as soon as possible.

Information, read display text

When one of the car's systems does not behave as intended, this information symbol illuminates and a text appears on the informa- tion display. The message text is cleared with the OK button, see page 198, or it disappears automatically after a time (time depending on which function is indicated). The information symbol can also illuminate in conjunction with other symbols.

NOTE

When a service message is shown, the sym- bol and message are cleared using the OK button, or disappear automatically after a time.

Main beam On

The symbol illuminates when main beam is on and with main beam flash.

Left/right-hand direction indicators

Both direction indicator symbols flash when the hazard warning flashers are used.

DRIVe Start/Stop*

The symbol shines when the engine is auto- stopped.

03 Your driving environment

Instruments and controls

03

74

Warning symbols

Symbol Specification

Low oil pressureA

Parking brake applied

Airbags SRS

Seatbelt reminder

Alternator not charging

Fault in brake system

Warning

A For certain engine variants, the symbol for low oil pressure is not used. Warnings are made via display text, see pages 333 and 335.

Low oil pressure

If this symbol illuminates during driving then the engine's oil pressure is too low. Stop the engine immediately and check the engine oil level, top up if necessary. If the symbol illumi- nates and the oil level is normal, contact a workshop. Volvo recommends that you seek assistance from an authorised Volvo work- shop.

Parking brake applied

This symbol illuminates with a constant glow when the parking brake is applied. The symbol flashes during application, and then changes over to a constant glow.

A flashing symbol means that a fault has arisen. Read the message on the information display.

Airbags SRS

If this symbol remains illuminated or illuminates while driving, it means a fault has been detected in the seatbelt buckle, SRS, SIPS, or IC systems. Drive immediately to a workshop to have the system checked. Volvo recom- mends that you seek assistance from an authorised Volvo workshop.

Seatbelt reminder

This symbol illuminates if someone in a front seat has not put on their seatbelt or if someone in a rear seat has taken off their seatbelt.

Alternator not charging

This symbol illuminates during driving if a fault has occurred in the electrical system. Visit a workshop. Volvo recommends that you seek assistance from an authorised Volvo work- shop.

Fault in brake system

If this symbol illuminates, the brake fluid level may be too low. Stop the car in a safe place

and check the level in the brake fluid reservoir, see page 337.

If the brake and ABS symbols illuminate at the same time, there may be a fault in the brake force distribution system.

1. Stop the car in a safe place and turn off the engine.

2. Restart the engine.

If both symbols extinguish, continue driving.

If the symbols remain illuminated, check the level in the brake fluid reservoir, see page 337. If the brake fluid level is nor- mal but the symbols are still illuminated, the car can be driven, with great care, to a workshop to have the brake system checked. Volvo recommends that you seek assistance from an authorised Volvo workshop.

WARNING

If the brake fluid is under the MIN level in the brake fluid reservoir, do not drive further before topping up the brake fluid.

The loss of brake fluid must be investigated by a workshop. Volvo recommends that you contact an authorised Volvo workshop.

03 Your driving environment

Instruments and controls

03

* Option/accessory, for more information, see Introduction. 75

WARNING

If the brake and ABS symbols are illumi- nated at the same time, there is a risk that the rear end will skid during heavy braking.

Warning

The red warning symbol illuminates when a fault has been indicated which could affect the safety and/or driveability of the car. An explan- atory text is shown on the information display at the same time. The symbol remains visible until the fault has been rectified but the text message can be cleared with the OK button, see page 198. The warning symbol can also illuminate in conjunction with other symbols.

Action:

1. Stop in a safe place. Do not drive the car further.

2. Read the information on the information display. Implement the action in accord- ance with the message in the display. Clear the message using the OK button.

Reminder doors not closed

If one of the doors, the bonnet2 or tailgate is not closed properly then the information or warn- ing symbol illuminates together with an explan- atory text message in the combined instrument

panel. Stop the car in a safe place as soon as possible and close the door, bonnet or boot lid, whichever is open.

If the car is driven at a speed lower than approx. 7 km/h then the information

symbol illuminates.

If the car is driven at a speed higher than approx. 7 km/h then the warning

symbol illuminates.

Trip meter

Trip meter and controls.

Display for trip meter

Controls for switching between trip meters T1 and T2, as well as resetting the trip meters

The meters are used to measure short dis- tances. The distance is shown in the display.

One short press on the control switches between the two trip meters T1 and T2. A long press (more than 2 seconds) resets the cur- rently displayed trip meter.

Clock

Clock and setting knob.

Display for showing the time

Controls for setting the clock

Turn the knob clockwise/anticlockwise to set the clock. Turn first to the end position and then turn past/over the end position a further approx. 1 mm - a "click" sounds and is felt in

2 Only cars with alarm*.

03 Your driving environment

Instruments and controls

03

76 * Option/accessory, for more information, see Introduction.

the button. Each "click" scrolls 1 minute. In order to change quickly - hold in the "click position".

In connection with a message the clock can be temporarily replaced by a symbol, see page 198.

Setting the clock in MY CAR

In addition to the previous manual/mechanical method the clock can also be set in the menu group MY CAR, for more information see page 200.

1. Locate Settings System options

Time. 2. The cursor is located in the first box for

Hour: Press OK - the box is activated. 3. Turn TUNE to set the correct hour and

press OK - the box is deactivated.

4. Turn TUNE to select the box for Minute (A) and press OK - the box is activated (B).

5. Turn TUNE to set the correct minute and press OK - the box is deactivated.

6. Turn TUNE to select the box for OK and press OK - the setting is complete.

The menu option Settings System options

Time format selects the 24h or 12h system (AM/PM).

RSI*

The function RSI (Road Sign Identification) helps the driver to see road signs containing information on current speed, that a motorway or road is starting/ending and when overtaking is prohibited. For detailed information on RSI, see page 148.

03 Your driving environment

Volvo Sensus

03

* Option/accessory, for more information, see Introduction. 77

General

Control panel in centre console

Navigation* - NAV, see separate owner's manual (Road and Traffic Information Sys- tem - RTI).

Infotainment (RADIO, MEDIA, TEL*), see page 232.

Car settings - MY CAR, see page 200.

Park assist camera - CAM*, see page 188.

Climate control, see page 208.

Volvo Sensus is the car's operating system, the heart of your personal Volvo experience. Volvo Sensus combines and presents many func- tions in several of the car's systems on the centre console TV screen. With Volvo Sensus

the car can be personalised by means of an intuitive user interface. Settings can be made in Car settings, Infotainment, Climate, etc.

With the centre console buttons and controls or the steering wheel's right-hand keypad* functions can be activated or deactivated and many different settings can be made.

With a press on MY CAR all settings related to the driving and control of the car are presented, such as City Safety, Locks and alarm, setting the clock, etc.

With a press on the respective function: RADIO, MEDIA, TEL*, NAV* and CAM* other sources, systems and functions can be acti- vated, e.g. AM, FM1, CD, DVD*, TV*, Blue- tooth*, navigation* and park assist camera*.

For more information on all functions/systems, see the respective section in the owner's man- ual.

03 Your driving environment

Key positions

03

78 * Option/accessory, for more information, see Introduction.

Insert and remove the remote control key

Ignition switch with remote control key extracted/ inserted.

NOTE

For cars with the Keyless* function the key does not need to be inserted into the ignition switch but can be stored in e.g. a pocket. For more information on Keyless functions - see page 53.

Insert the key

1. Hold the end of the remote control key with the detachable key blade and insert the key in the ignition switch.

2. Then press the key in the lock up to its end position.

IMPORTANT

Foreign objects in the ignition switch may jeopardise the function or destroy the lock.

Do not press the remote control key incor- rectly turned - Hold the end with the detach- able key blade, see page 50.

Withdraw the key

Push the remote control key, allow it to eject, then pull it out from the ignition switch.

Functions at different levels

In order to enable the use of a limited number of functions with the engine switched off, the car's electrical system can be set in 3 different levels (key positions) - 0, I and II - with the remote control key. Throughout this owner's manual these levels are described using the denomination "key positions".

The following table shows the functions avail- able in each key position/level.

Level Functions

0 Odometer, clock and tem- perature gauge are illumi- nated.

Power seats can be adjusted.

The audio system can be used for a limited time - see page 232.

I Panorama roof, power win- dows, 12 V socket in the pas- senger compartment, RTI, phone, ventilation fan and windscreen wipers can be used.

II The headlamps come on.

Warning/indicator lamps illu- minate for 5 seconds.

Several other systems are activated. However, heating in seat cushions and the rear window can only be activated after the engine has been started.

This key position consumes a

lot of current from the starter

battery and should therefore be

avoided!

03 Your driving environment

Key positions

03

* Option/accessory, for more information, see Introduction. 79

Choosing key position/level

Key position 0

Unlock the car - this means that the car's electrical system is at level 0.

Key position I

With the remote control key fully inserted into the ignition switch1 - Briefly press START/STOP ENGINE.

NOTE

To reach level I or II without starting the engine - do not depress the brake/clutch pedal when these key positions are due to be selected.

Key position II

With the remote control key fully inserted into the ignition switch1 - Give a long2 press on START/STOP ENGINE.

Back to key position 0

To return to key position 0 from position II and I - Briefly press on START/STOP

ENGINE.

Audio system

For information on the audio system's func- tions with remote control key removed - see page 232.

Starting and stopping the engine

For information about starting/switching off the engine - see page 114.

Towing

For important information about the remote control key during towing - see page 311.

1 Not necessary for cars with the Keyless* function. 2 Approx. 2 seconds.

03 Your driving environment

Seats

03

80 * Option/accessory, for more information, see Introduction.

Front seats

Lumbar support adjustment, turn the wheel1.

Forward/backward: lift the handle to adjust the distance to the steering wheel and ped- als. Check that the seat is locked after changing position.

Raise/lower* front edge of seat cushion, pump up/down.

Adjust backrest rake, turn the wheel.

Raise/lower the seat, pump up/down.

Control panel for power seat*.

WARNING

Adjust the position of the driver's seat before setting off, never while driving. Make sure that the seat is in locked position in order to avoid personal injury in the event of sudden braking or an accident.

Lowering the front seat backrest

The passenger seat backrest can be folded forward to make room for long loads.

Move the seat as far back/down as possi- ble.

Adjust the backrest to an upright position.

Lift the catches on the rear of the backrest and fold it forward.

4. Push the seat forward so that the head restraint "locks" in under the glovebox.

Raising takes place in reverse order.

WARNING

Grasp the backrest and make sure that it is properly locked after being folded up in order to avoid personal injury in the event of sudden braking or an accident.

1 Also applies to power seat.

03 Your driving environment

Seats

03

* Option/accessory, for more information, see Introduction. 81

Power seat*

Front edge of seat cushion up/down

Seat forward/backward and up/down

Backrest rake

The power front seats have overload protection which is tripped if a seat is blocked by an object. If this happens, go to key position I or 0 and wait a short time before adjusting the seat again.

Only one movement (forward/back/up/down) can be made at a time.

Power lumbar support*

Lumbar support, increasing

Lumbar support, decreasing

The lumbar support can be adjusted when the engine is running or when key position II is active.

Preparations

The seats can be adjusted for a certain time after unlocking the door with the remote con- trol key without the key in the ignition switch. Seat adjustment is normally made in key posi- tion I and can always be made when the engine is running.

Seat with memory function*

Store setting

Memory button

Memory button

Memory button

Button for storing settings

1. Adjust the seat and the door mirrors.

2. Hold the button depressed to store set- tings while depressing one of the memory buttons.

Using a stored setting

Hold one of the memory buttons depressed until the seat and the door mirrors stop. If you

03 Your driving environment

Seats

03

82 * Option/accessory, for more information, see Introduction.

release the button then the movement of the seat will stop.

Key memory* in remote control key2

All remote control keys can be used by differ- ent drivers to store the settings for the driver's seat and door mirrors3. Proceed as follows:

Adjust the seat as you want it.

Lock the car by pressing the lock button on the remote control key that you normally use. This stores the positions of the seat and door mirrors in the remote control key's memory4.

Unlock the car (by pressing the unlock but- ton on the same remote control key) and open the driver's door. The driver's seat

and door mirrors will automatically adopt the positions that are stored in the remote control key's memory (if the seat has been moved since you locked the car).

The key memory can be activated/deactivated in the menu system MY CAR under Settings

Car settings Car key memory. For a description of the menu system, see page 200.

Emergency stop

If the seat accidentally begins to move, press one of the setting buttons for the seat or mem- ory buttons in order to stop the seat.

Restarting to reach the seat position stored in the key memory is performed by pressing the unlock button on the remote control key. The driver's door must then be open.

WARNING

Risk of crushing! Make sure that children do not play with the controls. Check that there are no objects in front of, behind or under the seat during adjustment. Ensure that none of the backseat passengers will be trapped.

Heated seats

For heated seats, see page 213.

Rear seats

Head restraint, centre seat, rear

Adjust the head restraint according to passen- ger height so that the whole of the back of the head is covered if possible. Slide it up as required.

To lower the head restraint again, the button (located in the centre between the backrest and head restraint, see illustration) must be pressed in while the head restraint is pressed down carefully.

2 For key memory for Keyless function, see page 54. 3 Only if the car is equipped with power seat with memory and retractable power door mirrors. 4 This setting does not affect settings that have been stored in the power seat's memory function.

03 Your driving environment

Seats

03

83

Manual lowering of the outer head

restraints, rear seat

Pull the locking handle closest to the head restraint to fold the head restraint forward.

The head restraint is moved back manually until a "click" can be heard.

WARNING

The head restraints must be in locked posi- tion after being raised.

Lowering the rear seat backrest

IMPORTANT

There must be no objects on the rear seat when the backrest is to be folded down. The seat belts must not be connected either. Otherwise there is a risk of damaging the rear seat upholstery.

The triple-section backrest can be folded in different ways.

NOTE

The front seats may need to be pushed for- wards, and/or the backrests adjusted upwards, in order that the rear backrests can be folded forward fully.

The left-hand section can be folded sepa- rately.

The centre section can be folded sepa- rately.

The right-hand section can only be folded together with the centre section.

If the entire backrest is to be folded then the different sections should be folded separately.

If the centre backrest is being lowered - fold and adjust the centre backrest's head restraint downwards, see page 82.

The outer head restraints are lowered auto- matically when the outer backrests are lowered. Pull up the backrest's locking handle while folding the backrest for- ward at the same time. A red indicator on the lock catch shows that the backrest is no longer locked in place.

03 Your driving environment

Seats

03

84 * Option/accessory, for more information, see Introduction.

Raising takes place in reverse order.

NOTE

When the backrest has been raised, the red indicator should no longer be showing. If it is still showing then the backrest is not locked in place.

WARNING

Check that the backrests and head restraints in the rear seats are firmly locked after raising.

Electrical lowering of the rear seat's

outer head restraints*

1. The remote control key must be in position I or II.

2. Press the button to lower the rear outer head restraints to improve rearward visi- bility.

WARNING

Do not lower the outer head restraints if there are any passengers using of the outer seats.

Move the head restraint back manually until a click is heard.

WARNING

The head restraints must be in locked posi- tion after being raised.

03 Your driving environment

Steering wheel

03

* Option/accessory, for more information, see Introduction. 85

Adjusting

G 02

11 38

Adjusting the steering wheel.

Lever - releasing the steering wheel

Possible steering wheel positions

The steering wheel can be adjusted for both height and depth:

1. Pull the lever towards you to release the steering wheel.

2. Adjust the steering wheel to the position that suits you.

3. Push back the lever to fix the steering wheel in place. If the lever is stiff, press the steering wheel lightly at the same time as you push the lever back.

WARNING

Adjust and secure the steering wheel before driving.

With speed related power steering* the level of steering force can be adjusted, see page 224.

Keypads*

Keypads in the steering wheel.

Cruise control, see page 150

Adaptive cruise control, see page 152

Menu, audio and phone control, see page 233.

Horn

Horn.

Press the centre of the steering wheel to signal.

03 Your driving environment

Lighting

03

86 * Option/accessory, for more information, see Introduction.

Headlamp control

Overview, headlamp control.

Thumbwheel for adjusting display and instrument lighting

Rear fog lamp

Headlamp control

Thumbwheel1 for headlamp levelling

Headlamp control with AUTO mode

Overview, headlamp control.

Thumbwheel for adjusting display and instrument lighting

Rear fog lamp

Headlamp control

Thumbwheel1 for headlamp levelling

Instrument lighting

Different display and instrument lighting is switched on depending on key position, see page 78.

The display lighting is automatically subdued in darkness - the sensitivity is set with the thumbwheel.

The intensity of the instrument lighting is adjusted with the thumbwheel.

Headlamp levelling

The load in the car changes the vertical align- ment of the headlamp beam, which could daz- zle oncoming motorists. Avoid this by adjusting the height of the beam. Lower the beam if the car is heavily laden.

1. Leave the engine running, or have the car's electrical system in key position I.

2. Roll the thumbwheel up/down to raise/ lower beam alignment.

Cars with active Xenon headlamps* have auto- matic headlamp levelling and are therefore not equipped with the thumbwheel.

1 Not available for cars equipped with active Xenon headlamps*.

03 Your driving environment

Lighting

03

* Option/accessory, for more information, see Introduction. 87

Main/dipped beam

Headlamp control and stalk switch.

Position for main beam flash

Position for main beam

Position Specification

Dipped beamA/Dipped beam off.

Main beam can be activatedA.

Main beam flash operates in this position.

Position/parking lamps

Dipped beam

Main beam can be activated.

Main beam flash operates in this position.

A Applies to certain markets.

Headlamp control with AUTO mode

Headlamp control and stalk switch.

Position for main beam flash

Position for main beam

Position Specification

Dipped beam off.

Main beam flash operates in this position.

Position/parking lamps

03 Your driving environment

Lighting

03

88 * Option/accessory, for more information, see Introduction.

Position Specification

Dipped beamA/Dipped beam off in good light conditions. The "Tunnel detection*" function activates dipped beam in poor light conditions.

The function for "Main beam with automatic activation*" can be used.

Main beam flash operates in this position.

Dipped beam

Main beam can be activated.

Main beam flash operates in this position.

A Applies to certain markets.

Volvo recommends that mode is used, as long as the traffic situation or weather con- ditions are not unfavourable for the function for "Main beam with automatic activation*".

Main beam flash

Move the stalk switch gently towards the steer- ing wheel to the position for main beam flash.

Main beam comes on until the stalk switch is released.

Dipped beam

When the engine is started, dipped beam is activated automatically2 if the headlamp con- trol is in position . If necessary, auto- matic dipped beam for this position can be deactivated by a workshop. Volvo recom- mends that you contact an authorised Volvo workshop.

In position dipped beam is always switched on when the engine is running or when key position II is active.

Main beam

Main beam can be activated when the head- lamp control is in position 2 or . Activate/deactivate main beam by moving the stalk switch towards the steering wheel to the end position and release.

When main beam has been activated the sym- bol illuminates in the combined instru- ment panel.

Main beam with automatic activation -

AHB*

Main beam with automatic activation (Active High Beam - AHB) is a function which uses a camera sensor at the top edge of the wind- screen to detect the headlamp beams of oncoming traffic or the rear lights of vehicles in front, and then switches from main beam to dipped beam. The lights are switched back to main beam a second or so after the camera sensor no longer detects any such light.

In cars with this function the headlamp control has another design, see page 87.

This function can be activated when the head- lamp control is in position . For activation to take place, the engine must have been run- ning for at least 20 seconds and the speed of the car must be 20 km/h or higher.

2 Applies to certain markets, for headlamp control without AUTO mode.

03 Your driving environment

Lighting

03

89

Light switch in position AUTO.

Activate/deactivate AHB by moving the left- hand stalk switch towards the steering wheel to the end position and release. Deactivation when main beam is on means that the lights switch directly to dipped beam.

Headlamp control and stalk switch.

When AHB has been activated the symbol

illuminates in the combined instru- ment panel's display. When main beam has been activated the symbol also illumi- nates in the combined instrument panel.

NOTE

Keep the windscreen surface in front of the camera sensor clean from ice, snow, mist and dirt.

Do not attach or fit anything to the wind- screen in front of the camera sensor, as this could reduce or prevent the function of one or more camera-dependent systems.

If the message AHB temporary unavailable

is shown in the combined instrument panel's display then you have to switch manually between main and dipped beam. However, the headlamp control may nevertheless be in posi- tion . The same applies if the message Windscreen Sensors blocked and the

symbol are shown. The sym- bol goes out when these messages are shown.

AHB may be temporarily unavailable e.g. in sit- uations with dense fog or heavy rain. When AHB becomes available again, or the wind- screen sensors are no longer covered, the

message goes out and the symbol illu- minates.

WARNING

AHB is an aid for using optimum light com- position when conditions are favourable.

The driver always bears responsibility for manually switching between main and dipped beam when traffic situations or weather conditions so require.

03 Your driving environment

Lighting

03

90 * Option/accessory, for more information, see Introduction.

IMPORTANT

Examples of when manual switching between main and dipped beam may be required:

In heavy rain or dense fog

In snow flurries or slush

In moonlight

When driving in poorly lit built-up areas

When the traffic ahead has weak light- ing

If there are pedestrians on or beside the road

If there are highly reflective objects such as signs in the vicinity of the road

When the lighting from oncoming traffic is obscured by e.g. a crash barrier

When there is traffic on connecting roads

On the brow of a hill or in a hollow

In sharp bends.

For more information on the limitations of the camera sensor, see page 175.

Tunnel detection*

In cars with rain sensor* the rain sensor detects the changed light conditions when the car is

e.g. driven into a tunnel, and dipped beam is activated within a second in markets without automatic dipped beam. Dipped beam is deac- tivated approx. 20 seconds after the car has been driven out of the tunnel. Note! - The head- lamp control must be in position for tun- nel detection to work.

Active Xenon headlamps - ABL*

Headlamp pattern with function deactivated (left) and activated (right) respectively.

If the car is equipped with active Xenon head- lamps Active Bending Lights - ABL the light from the headlamps follows the steering wheel movement in order to provide maximum light- ing in bends and junctions and so provide increased safety.

The function is activated automatically when the car is started. In the event of a fault in the function the symbol illuminates in the combined instrument panel at the same time as the information display shows an explana- tory text and a further illuminated symbol.

Symbol Display Specifica- tion

Headlamp

failure

Service

required

The system is disen- gaged. Visit a workshop if the mes- sage remains. Volvo rec- ommends that you contact an authorised Volvo work- shop.

The function is only active in twilight or dark- ness and only when the car is moving.

The function3 can be deactivated/activated in the menu system MY CAR under My XC60

3 Activated on delivery from the factory.

03 Your driving environment

Lighting

03

* Option/accessory, for more information, see Introduction. 91

Active Bending Lights or under Settings

Car settings Light settings Active

Bending Lights. For a description of the menu system, see page 201.

For headlamp pattern adjustment, see page 94.

Auxiliary lamps*

If the car has auxiliary lamps, the driver can use the MY CAR menu system to choose whether they should be deactivated or switched on/off simultaneously with the main beam4, see page 202.

Position/parking lamps

Headlamp control in position for position/parking lamps.

Turn the headlamp control to the position for position/parking lamps (number plate lighting is illuminated at the same time).

When it is dark outside and the tailgate is opened the rear position lamps illuminate to alert traffic behind. This takes place irrespec- tive of what position the headlamp control is in or what key position the car's electrical system is in.

Brake lights

The brake light automatically comes on during braking. For information on the Emergency brake lights and automatic hazard warning flashers, see page 133.

Rear fog lamp

Button for rear fog lamp.

The rear fog lamp consists of one rear lamp and can only be switched on in combination with main/dipped beam.

Press the button for On/Off. The rear fog lamp indicator symbol on the combined instrument panel and the light in the button illu- minate when the rear fog lamp is switched on.

The rear fog lamp is switched off automatically when the engine is switched off.

NOTE

Regulations for using rear fog lamps vary between different countries.

4 Auxiliary lamps must be connected to the electrical system by a workshop. Volvo recommends that you contact an authorised Volvo workshop.

03 Your driving environment

Lighting

03

92

Hazard warning flashers

Button for hazard warning flashers.

Press the button to activate the hazard warning flashers. Both direction indicator symbols in the combined instrument panel flash when the hazard warning flashers are in use.

The hazard warning flashers are activated automatically when the car has been braked so suddenly that the emergency brake lights have been activated at a speed below 10 km/h. The hazard warning flashers remain on when the car has stopped and are deactivated automat- ically when the car is driven off again or the button is depressed. For more information on Emergency brake lights and automatic hazard warning flashers, see page 133.

Direction indicators/flashers

Direction indicators/flashers.

Short flash sequence

Move the stalk switch up or down to the first position and release. The direction indicators flash three times. The function can be activated/deactivated in the menu system MY CAR under Settings Car

settings Light settings Triple

indicator. For a description of the menu system, see page 201.

Continuous flash sequence

Move the stalk switch up or down to the outer position.

The stalk switch remains in its position and is moved back manually, or automatically by the steering wheel movement.

Direction indicator symbols

For direction indicator symbols, see page 72.

Interior lighting

G 02

11 49

Controls in roof console for the front reading lamps and passenger compartment lighting.

Reading lamp, left-hand side

Reading lamp, right-hand side

Interior lighting

All lighting in the passenger compartment can be switched on and off manually within 30 minutes from when:

the engine has been switched off and the car's electrical system is in key position 0

the car has been unlocked but the engine has not been started.

03 Your driving environment

Lighting

03

93

Front roof lighting

The front reading lamps are switched on or off by pressing the relevant button in the roof con- sole.

Rear roof lighting

G 02

11 50

Rear roof lighting.

Rear roof lighting in cars with panorama roof.

The lamps are switched on or off by pressing each respective button.

Courtesy lighting

Courtesy lighting (and passenger compart- ment lighting) is switched on and off respec- tively when a side door is opened or closed.

Glovebox lighting

Glovebox lighting is switched on and off respectively when the lid is opened or closed.

Vanity mirror

The lighting for the vanity mirror, see page 227, is switched on and off respectively when the cover is opened or closed.

Lighting, cargo area

The lighting in the cargo area is switched on and off respectively when the tailgate is opened or closed.

Automatic lighting

The switch for passenger compartment light- ing has three positions for the lighting in the passenger compartment:

Off right-hand side pressed in, automatic lighting deactivated.

Neutral position automatic lighting acti- vated.

On left-hand side pressed in, passenger compartment lighting switched on.

Neutral position

When the button is in neutral position the pas- senger compartment lighting is switched on and off automatically in accordance with the following.

The passenger compartment lighting is switched on and remains on for 30 seconds if:

the car is unlocked with the remote control key or key blade, see pages 47 or 50

the engine has been switched off and the car's electrical system is in key position 0.

Passenger compartment lighting is switched off when:

03 Your driving environment

Lighting

03

94

the engine is started

the car is locked.

The passenger compartment lighting comes on and remains on for two minutes if one of the doors is open.

If any lighting is switched on manually and the car is locked then it will be switched off auto- matically after two minutes.

Mood lights

When the normal passenger compartment lighting is switched off and the engine is run- ning, a number of LEDs illuminate, including one in the ceiling lighting, in order to provide a low-light and enhance the mood while driving. This lighting goes out for a little while after the normal passenger compartment lighting when the car is locked.

Home safe light duration

Some of the exterior lighting can be kept switched on to work as home safe lighting after the car has been locked.

1. Remove the remote control key from the ignition switch.

2. Move the left-hand stalk switch toward the steering wheel to the end position and release it. The function can be activated in

the same way as with main beam flash, see page 87.

3. Get out of the car and lock the door.

When the function is activated, dipped beam, parking lamps, door mirror lamps, number plate lighting, interior roof lamps and courtesy lighting are switched on.

The length of time for which the home safe lighting should be kept on can be set in the menu system MY CAR under Settings Car

settings Light settings Home safe light

duration. For a description of the menu sys- tem, see page 201.

Approach light duration

Approach lighting is switched on with the remote control key, see page 47, and is used to switch on the car's lighting at a distance.

When the function is activated with the remote control, parking lamps, door mirror lamps, number plate lighting, interior roof lamps and courtesy lighting are switched on.

The length of time for which the approach light- ing should be kept on can be set in the menu system MY CAR under Settings Car

settings Light settings Approach light

duration. For a description of the menu sys- tem, see page 201.

Adjusting headlamp pattern

G 02

11 51

Headlamp pattern, left-hand traffic.

G 02

11 52

Headlamp pattern, right-hand traffic.

The headlamp pattern must be adjusted to avoid dazzling oncoming motorists and can be

03 Your driving environment

Lighting

03

* Option/accessory, for more information, see Introduction. 95

set for right or left-hand traffic. The correct pat- tern will also better illuminate the verge.

Active Xenon headlamps*

The car must be stationary with the engine run- ning when the headlamp pattern is shifted between right and left-hand traffic.

1. Access the menu system MY CAR under Settings Car settings Light

settings.

2. Select between Temporary RH traffic

and Temporary LH traffic.

For a description of the menu system, see page 201

Halogen headlamps

The headlamp pattern for halogen headlamps is readjusted by masking the headlamp lens. The headlamp pattern may not be as good.

Masking the headlamps

1. Copy the A and B templates for left-hand drive cars or the C and D templates for right-hand drive cars with a scale of 1:1, see page 97:

A = LHD Right (left-hand drive, right lens)

B = LHD Left (left-hand drive, left lens)

C = RHD Right (right-hand drive, right lens)

D = RHD Left (right-hand drive, left lens)

2. Transfer the template to a self-adhesive waterproof material and cut it out.

3. Position the self-adhesive templates at the right distance from the edge of the head- lamp lens using the illustration, see page 96, and the dimensions in the fol- lowing list:

Templates A and D: horizontal line approx. 104 mm, vertical line approx. 20 mm

Templates B and C: horizontal line approx. 167 mm, vertical line approx. 14 mm

03 Your driving environment

Lighting

03

96

Aligning the templates

Upper row: left-hand drive cars, templates A and B. Lower row: right-hand drive cars, templates C and D.

03 Your driving environment

Lighting

03

97

Templates for halogen headlamps

03 Your driving environment

Wipers and washing

03

98 * Option/accessory, for more information, see Introduction.

Windscreen wipers1

Windscreen wipers and windscreen washers.

Rain sensor, on/off

Thumbwheel sensitivity/frequency

Windscreen wipers off

Move the stalk switch to position 0 to switch off the windscreen wipers.

Single sweep

Raise the stalk switch and release to make one sweep.

Intermittent wiping

Set the number of sweeps per time unit with the thumbwheel when inter-

mittent wiping is selected.

Continuous wiping

The wipers sweep at normal speed.

The wipers sweep at high speed.

IMPORTANT

Before activating the wipers during winter - ensure that the wiper blades are not frozen in and that any snow or ice on the wind- screen (and rear window) is scraped away.

IMPORTANT

Use plenty of washer fluid when the wipers are cleaning the windscreen. The wind- screen must be wet when the windscreen wipers are operating.

Service position wiper blade

For cleaning the windscreen/wiper blades and replacement of wiper blades see see page 345 and 364.

Rain sensor*

The rain sensor automatically starts the wind- screen wipers based on how much water it detects on the windscreen. The sensitivity of

the rain sensor can be adjusted using the thumbwheel.

When the rain sensor is activated a light in the button the rain sensor symbol is shown in the right-hand display in the combined instrument panel.

Activating and setting the sensitivity

When activating the rain sensor, the car must be running or the remote control key in position I or II while the windscreen wiper stalk switch must be in position 0 or in the position for a single sweep.

Activate the rain sensor by pressing the button . The windscreen wipers make one

sweep.

Press the stalk switch up for the wipers to make an extra sweep.

Turn the thumbwheel upward for higher sensi- tivity and downward for lower sensitivity. (An extra sweep is made when the thumbwheel is turned upward.)

Deactivate

Deactivate the rain sensor by pressing the but- ton or move the stalk switch down to another wiper program.

1 Replacing the wiper blades see page 345, service position, wiper blade see page 345 and filling washer fluid see page 347.

03 Your driving environment

Wipers and washing

03

* Option/accessory, for more information, see Introduction. 99

The rain sensor is automatically deactivated when the remote control key is removed from the ignition switch or five minutes after the engine has been switched off.

IMPORTANT

The windscreen wipers could start and be damaged in an automatic car wash. Deac- tivate the rain sensor while the car is running or the remote control key is in position I or II. The symbol in the combined instrument panel and the lamp in the button go out.

Washing the headlamps and windows

Washing function.

Washing the windscreen

Move the stalk switch toward the steering wheel to start the windscreen and headlamp washers.

The windscreen wipers will make several more sweeps and the headlamps are washed once the stalk switch has been released.

Heated washer nozzles*

The washer nozzles are heated automatically in cold weather to prevent the washer fluid freezing solid.

High-pressure headlamp washing*

High-pressure headlamp washing consumes a large quantity of washer fluid. To save fluid, the headlamps are washed automatically at every fifth windscreen wash cycle.

Reduced washing

If only approx. 1 litre of washer fluid remains in the reservoir and the message that you should fill the washer fluid is shown in the combined instrument panel's display, then the supply of washer fluid to the headlamps is switched off. This is in order to prioritise cleaning the wind- screen and the visibility through it.

Wiping and washing the rear window

Rear window wiper intermittent wiping

Rear window wiper continuous speed

Press the stalk switch forward (see the arrow in the illustration above) to initiate rear window washing and wiping.

NOTE

The rear window wiper is equipped with overheating protection which means that the motor is switched off if it overheats. The rear window wiper works again after a cool- ing period (30 seconds or longer, depending on the heat in the motor and the outside temperature).

03 Your driving environment

Wipers and washing

03

100

Wiper reversing

Engaging reverse gear while the windscreen wipers are on initiates intermittent rear window wiping2. The function stops when reverse gear is disengaged.

If the rear window wiper is already on at con- tinuous speed, no change is made.

NOTE

On cars with rain sensor, the rear window wiper is activated with reversing, if the sen- sor is activated and it is raining.

2 This function (intermittent wiping when reversing) can be deactivated. Visit a workshop. Volvo recommends that you contact an authorised Volvo workshop.

03 Your driving environment

Windows, rearview and door mirrors

03

* Option/accessory, for more information, see Introduction. 101

General

Laminated glass

The windscreen and panorama roof have laminated glass. It is reinforced which provides better protection against break-ins and improved

sound insulation in the passenger compart- ment. Other glass surfaces*.

Water and dirt-repellent coating*

Windows are treated with a coating that improves the view in difficult

weather conditions. Maintenance, see page 365.

IMPORTANT

Do not use a metal ice scraper to remove ice from the windows. Use the defroster to remove ice from the mirrors, see page 104.

Heat-reflecting windscreen*

Areas where IR film is not applied.

Dimensions

A 47 mm

B 87 mm

The windscreen is equipped with a heat- reflecting film (IR) that reduces the solar heat radiation into the passenger compartment.

The positioning of electronic equipment, such as a transponder, behind a glass surface with heat-reflecting film may affect its function and performance.

For the optimal function of electronic equip- ment, it should be positioned on the part of the

windscreen with no heat-reflecting film (see the highlighted area in the above illustration).

Power windows

Driver's door control panel.

Switch for electric child safety locks* and disengaging rear power window buttons, see page 62.

Rear window controls

Front window controls

WARNING

Check that none of the rear seat passengers is in danger of becoming trapped in any way when closing the windows from the driver's door.

03 Your driving environment

Windows, rearview and door mirrors

03

102

WARNING

Make sure that children or other passengers are not in danger of becoming trapped in any way when closing the windows, in par- ticular when the remote control key is used.

WARNING

If there are children in the car - remember to always switch off the power supply to the power windows by selecting key position 0 and then take the remote control key with you when leaving the car. For information on key positions - see page 79.

Operating

Operating the power windows.

Operating without auto

Operating with auto

All power windows can be operated using the control panel for the driver's door - the control panels for the other doors can only each oper- ate their respective power window. Only one control panel can be operated at a time.

In order for the power windows to be used the key position must be at least I - see page 78. The power windows can be operated for a few minutes after the engine has been switched off and after the remote control key has been removed - although not after a door has been opened.

Closing of the windows is stopped and the window is opened if anything prevents its movement. It is possible to force the pinch pro- tection when closing has been interrupted, e.g. with ice, by continuously holding the button up until the window is closed. The pinch protec- tion is reactivated after a brief pause.

NOTE

One way to reduce the pulsating wind noise when the rear windows are open is to also open the front windows slightly.

Operating without auto

Move one of the controls up/down gently. The power windows move up/down as long as the control is held in position.

Operating with auto

Move one of the controls up/down to the end position and release it. The window runs auto- matically to its end position.

Operating with the remote control key

and central locking

To remotely operate the power windows from the outside with the remote control key or from inside with central locking, see pages 48 and 56.

03 Your driving environment

Windows, rearview and door mirrors

03

103

Resetting

If the battery is disconnected then the function for automatic opening must be reset so that it can work correctly.

1. Gently raise the front section of the button to raise the window to its end position and hold it there for one second.

2. Release the button briefly.

3. Raise the front section of the button again for one second.

WARNING

Resetting must be carried out to ensure that pinch protection works.

Door mirrors

Door mirror controls.

Adjusting

1. Press the L button for the left-hand door mirror or the R button for the right-hand door mirror. The light in the button illumi- nates.

2. Adjust the position with the joystick in the centre.

3. Press the L or R button again. The light should no longer be illuminated.

WARNING

The mirrors are the wide angle type for opti- mum surveillance. Objects may appear fur- ther away than they actually are.

Storing the position1

The mirror positions are stored in the key mem- ory when the car has been locked with the remote control key. When the car is unlocked with the same remote control key the mirrors and the driver's seat adopt the stored positions when the driver's door is opened.

The function can be activated/deactivated in the menu system MY CAR under Settings

Car settings Car key memory Personal

settings in key memory. For a description of the menu system, see page 201.

Angling the door mirror when parking1

The door mirror can be angled down for the driver to view the side of the road when parking for example.

Engage reverse gear and press the L or R button.

When reverse gear is disengaged the mirror automatically returns to its original position after approx. 10 seconds, or sooner by press- ing the L and R button.

Automatic angling of the door mirror

when parking1

When reverse gear is engaged the door mirror is automatically angled down so that the driver can see the side of the road when parking for

1 Only in combination with power seat with memory, see page 81.

03 Your driving environment

Windows, rearview and door mirrors

03

104 * Option/accessory, for more information, see Introduction.

example. When reverse gear is disengaged the mirror automatically returns to its original posi- tion after a short time.

The function can be activated/deactivated in the menu system MY CAR under Settings

Car settings Side mirror settings Tilt

left mirror or Tilt right mirror. For a descrip- tion of the menu system, see page 201.

Automatic retraction when locking1

When the car is locked/unlocked with the remote control key the door mirrors are auto- matically retracted/extended.

The function can be activated/deactivated in the menu system MY CAR under Settings

Car settings Side mirror settings Fold

mirrors. For a description of the menu system, see page 201.

Resetting to neutral

Mirrors that have been moved out of position by an external force must be reset electrically to the neutral position for electric retracting/ extending to work correctly:

1. Retract the mirrors with the L and R but- tons.

2. Fold them out again with the L and R but- tons.

3. Repeat the above procedure as necessary.

The mirrors are now reset in neutral position.

Retractable power door mirrors*

The mirrors can be retracted for parking/driving in narrow spaces:

1. Depress the L and R buttons simultane- ously (key position must be at least I).

2. Release them after approximately 1 second. The mirrors auto- matically stop in the fully retracted posi- tion.

Fold out the mirrors by pressing down the L and R buttons simultaneously. The mirrors automatically stop in the fully extended posi- tion.

Home safe and approach lighting

The light on the door mirrors illuminates when approach lighting or home safe lighting is selected, see page 94.

Rear window and door mirror defrosters

Use the defroster to quickly remove misting and ice from the rear window and the door mir- rors.

One press of the button starts the heating. The light in the button indicates that the function is active. Disconnect the heating as soon as the ice/misting is cleared in order not to load the battery unnecessarily. However, the heating is switched off automatically after a certain time.

The door mirrors and rear window are demis- ted/defrosted automatically if the car is started in an outside temperature lower than +9 C. Automatic defrosting can be selected in the menu system MY CAR under Settings

1 Only in combination with power seat with memory, see page 81.

03 Your driving environment

Windows, rearview and door mirrors

03

* Option/accessory, for more information, see Introduction. 105

Climate settings Automatic rear

defroster. Select between On or Off. For a description of the menu system, see page 201.

Interior rearview mirror

Control for dimming

Manual dimming

Bright light from behind could be reflected in the rearview mirror and dazzle the driver. Use dimming with the dimming control when lights from behind are distracting:

1. Use dimming by moving the control in towards the passenger compartment.

2. Return to normal position by moving the control towards the windscreen.

Automatic dimming*

Bright light from behind is automatically dimmed by the rearview mirror. The control is not available in mirrors with automatic dim- ming.

The compass* can only be specified for rear- view mirrors with automatic dimming, see page 106.

03 Your driving environment

Compass*

03

106 * Option/accessory, for more information, see Introduction.

Operation

Rearview mirror with compass.

The upper right-hand corner of the rearview mirror has an integrated display that shows the compass direction in which the front of the car is pointing. Eight different directions are shown with English abbreviations: N (north), NE (north east), E (east), SE (south east), S (south), SW

(south west), W (west) and NW (north west).

The compass is activated automatically when the car is started or in key position II, see page 78. To deactivate/activate the compass - press in the button on the underside of the mir- ror using a paper clip for example.

Calibration

The earth is divided into 15 magnetic zones. The compass is set for the geographic area to which the car was delivered. The compass

should be calibrated if the car is moved across several magnetic zones. Proceed as follows:

1. Stop the car in a large open area free from steel structures and high-voltage power lines.

2. Start the car.

NOTE

For optimum calibration - switch off all elec- trical equipment (climate control system, wipers etc.) and make sure that all doors are closed.

3. Hold the button on the underside of the rearview mirror depressed approx. 6 seconds (using a paper clip for example) until the character C is shown.

G 03

02 95

Magnetic zones.

4. Hold the button on the underside of the rearview mirror depressed approx. 3 seconds. The number of the cur- rent magnetic zone is shown.

5. Press the button repeatedly until the required magnetic zone (115) is shown. See the map of magnetic zones for the compass.

6. Wait until the display resumes showing the character C.

7. Drive slowly in a circle at a speed of no more than 10 km/h until a compass direc- tion is shown in the display, indicating that calibration is complete. Then drive a further 2 circles to fine-tune calibration.

8. Repeat the above procedure as necessary.

03 Your driving environment

Power panorama roof*

03

* Option/accessory, for more information, see Introduction. 107

General

The panorama roof is divided into two sections. Only the front section can be opened - hori- zontally or vertically at the rear edge (ventilation position).

The panorama roof has a sun blind made of perforated fabric and located under the glass roof to provide extra protection from factors such as strong sunlight.

The panorama roof and curtain are operated with a control located in the roof. The control is activated when the key is in position I or II, see page 78.

WARNING

Children, other passengers or objects may be trapped by the panorama roof's moving parts.

Always operate the panorama roof with caution.

Do not allow children to play with the controls.

Remember to always switch off the power supply to the panorama roof by selecting key position 0 and then take the remote control key/PCC* with you when leaving the car. For information on key positions - see page 79.

Operating

Opening, automatic

Opening, manual

Closing, manual

Closing, automatic

The panorama roof and curtain can be oper- ated in key position I or II.

Automatic operation

1. To open the curtain all the way - press the control rearward to the automatic opening position and release.

2. To then open the panorama roof all the way - press the control rearward again to the automatic opening position and release.

03 Your driving environment

Power panorama roof*

03

108 * Option/accessory, for more information, see Introduction.

Close the roof/curtain by repeating the preced- ing procedure in reverse order - press the con- trol forward to the automatic closing position instead.

Rapid opening/closing

The panorama roof and curtain can be opened/ closed simultaneously:

To open - press the control rearward to the automatic operation position twice and release.

To close - press the control forward to the automatic operation position twice and release.

Manual operation

1. To open the curtain - press the control rearward to the point of resistance for man- ual opening. The curtain moves towards maximum opening as long as the button is depressed.

2. To angle the panorama roof - press the control rearward again to the point of resis- tance for manual opening

3. To open the panorama roof - press the control rearward to the point of resistance for manual opening a third time. The pan- orama roof moves towards maximum opening as long as the button is kept depressed.

Close the roof/curtain by repeating the preced- ing procedure in reverse order - press the con- trol forward to the manual closing position instead.

NOTE

For manual opening, the curtain must be fully open before the panorama roof can be opened. For the reverse procedure, the panorama roof must be fully closed before the curtain can be closed.

Ventilation position

Ventilation position, vertically at the rear edge.

Open by pressing the rear edge of the con- trol upward.

Close by pulling the rear edge of the con- trol down.

When the ventilation position is selected the front section is raised at its rear edge. If the curtain is fully closed when ventilation position is selected - then it opens automatically approx. 50 mm.

Closing using the remote control key or

central locking button

One long press on the lock button, see pages 47 (remote control key) and 56 (central locking button), closes the panorama roof and all the windows. The door mirrors are retracted* and the doors and tailgate are locked. To interrupt closing, press the lock button again.

WARNING

If closing the panorama roof with the remote control key, make sure nothing could become trapped.

03 Your driving environment

Power panorama roof*

03

* Option/accessory, for more information, see Introduction. 109

Wind deflector

The panorama roof has a wind deflector that is folded up when the panorama roof is in the open position.

03 Your driving environment

Alcolock*

03

110 * Option/accessory, for more information, see Introduction.

General information on the alcolock

The alcolock's1 function is to prevent the car from being driven by individuals under the influence of alcohol. Before the engine can be started the driver must take a breath test that verifies that he/she is not under the influence of alcohol. Alcolock calibration takes place in accordance with each market's limit value in force for driving legally.

WARNING

The Alcolock is an aid and does not exempt the driver from responsibility. It is always the responsibility of the driver to be sober and to drive the car safely.

Functions

1. Nozzle for breath test. 2. Switch. 3. Transmission button. 4. Lamp for battery status. 5. Lamp for result of breath test. 6. Lamp indicates ready for breath test.

Operation

Battery

Alcolock indicator lamp (4) shows battery sta- tus:

Indicator lamp (4)

Battery status

Green flashing Charging in pro- gress

Green Fully charged

Yellow Semi-charged

Red Discharged - fit the charger in the holder or connect the power supply cable from the glovebox.

NOTE

Store the Alcolock in its holder. This will keep the built-in battery fully charged and the Alcolock is activated automatically when the car is opened.

1 Also called Alcoguard.

03 Your driving environment

Alcolock*

03

* Option/accessory, for more information, see Introduction. 111

Storage

Handheld unit storage and charging station.

The handheld alcolock unit is released by depressing it slightly in its holder and releasing it - it then springs out and can be removed from the holder.

Replace the handheld unit in the holder by pushing it in until it engages.

Store the handheld unit in the holder - this provides it with the best protection and keeps its batteries fully charged.

Before starting the engine

The Alcolock is activated automatically and is then ready for use when the car is opened.

1. When the indicator lamp (6) is green the Alcolock is ready for use.

2. Withdraw the Alcolock from its holder. If the Alcolock is outside the car when it is

unlocked then it must first be activated with the switch (2).

3. Fold up the nozzle (1), take a deep breath and blow with an even pressure until a "click" is heard after approx. 5 seconds. The result will be one of the alternatives in the following table Result after breath

test. 4. If no message is shown then the transmis-

sion to the car may have failed - in which case, press the button (3) to transmit the result to the car manually.

5. Fold down the nozzle and refit the Alcolock in its holder.

6. Start the engine following an approved breath test within 5 minutes - otherwise it must be repeated.

Result after breath test

Indicator lamp (5) + Display text

Specification

Green lamp + Alco-

guard Approved

test

Start the engine - no alcohol content measured.

Yellow lamp + Alco-

guard Approved

test

Engine starting pos- sible - measured alcohol content is above 0.1 promille but below the limit value in forceA.

Red lamp + Disap-

proved test Wait 1

minute

Engine starting not possible - measured alcohol content is above the limit value in forceA.

A Limits vary between countries, so find out what limits apply. See also the section entitled General information on the Alcolock on page 110

NOTE

After a completed period of driving, the engine can be restarted within 30 minutes without a new breath test.

03 Your driving environment

Alcolock*

03

112 * Option/accessory, for more information, see Introduction.

To bear in mind

Before the breath test

In order to obtain correct function and as accu- rate a measurement result as possible:

Avoid eating or drinking approx. 5 minutes before the breath test.

Avoid excess windscreen washing - the alcohol in the washer fluid may result in an incorrect measurement result.

Change of driver

In order to ensure that a new breath test is car- ried out in the event of a change of driver - depress the switch (2) and the send button (3) simultaneously for approx. 3 seconds. At which point the car returns to start inhibition mode and a new approved breath test is required before starting the engine.

Calibration and service

The Alcolock must be checked and calibrated at a workshop2 every 12 months.

30 days before recalibration is necessary the display shows Alcoguard Calibr. required. If calibration is not carried out within these 30 days then normal engine starting will be blocked - only starting with the Bypass func-

tion will then be possible, see page 112 sec- tion Emergency situation.

The message can be cleared by pressing the send button (3) once. Otherwise it goes out on its own after approx. 2 minutes but then reap- pears each time the engine is started - only recalibration at a workshop2 can clear the mes- sage permanently.

Cold or hot weather

The colder the weather the longer it takes before the Alcolock is ready for use:

Temperature (C) Maximum heat- ing time (sec-

onds)

+10 to +85 10

-5 to +10 60

-40 to -5 180

At temperatures below -20 C or above +60 C the Alcolock requires additional power supply. The display shows Alcoguard insert

power cable. In which case, connect the power supply cable from the glovebox and wait until indicator lamp (6) is green.

In extremely cold weather the heating time can be reduced by taking the Alcolock indoors.

Emergency situation

In the event of an emergency situation or the Alcolock is out of order, it is possible to bypass the Alcolock in order to drive the car.

NOTE

All Bypass activation is logged and saved in memory, see page 8 in the section, Record- ing data.

After the Bypass function has been activated the display shows Alcoguard Bypass

enabled the whole time while driving and can only be reset by a workshop2.

The Bypass function can be tested without the error message being logged - in which case, carry out all the steps without starting the car. The error message is cleared when the car is locked.

When the Alcolock is installed, either the Bypass or Emergency function is selected as the bypassing option. This setting can be changed afterwards at a workshop2.

2 An authorised Volvo workshop is recommended.

03 Your driving environment

Alcolock*

03

* Option/accessory, for more information, see Introduction. 113

Activating the Bypass function

Depress and hold the left-hand stalk switch OK button and the button for haz- ard warning flashers simultaneously for approx. 5 seconds - the display first shows Bypass activated Wait 1 minute and then Alcoguard Bypass enabled - after which the engine can be started.

This function can be activated several times. The error message shown during driving can only be cleared at a workshop2.

Activating the Emergency function

Depress and hold the left-hand stalk switch OK button and the button for haz- ard warning flashers simultaneously for approx. 5 seconds - the display shows Alcoguard Bypass enabled and the engine can be started.

This function can be used once, after which a reset must be made at a workshop2.

Symbols and display messages

In addition to the previously described mes- sages, the combined instrument panel's dis- play can also show the following:

Display text Meaning/Action

Alcoguard Restart

possible

The engine has been switched off for less than 30 minutes - engine starting pos- sible without new test.

Alcoguard Service

required

Contact a work- shop2.

Alcoguard No sig-

nal

Transmission failed - send manually with button (3) or take a new breath test.

Alcoguard Invalid

test

Test failed - take a new breath test.

Alcoguard Blow

longer

Blowing too short - blow for longer.

Alcoguard Blow

softer

Blowing too hard - blow more gently.

Display text Meaning/Action

Alcoguard Blow

harder

Blowing too weak - blow harder.

Alcoguard wait

Preheating

Heating not finished - wait for text Alco-

guard Blow 5 sec-

onds.

2 An authorised Volvo workshop is recommended.

03 Your driving environment

Starting the engine

03

114 * Option/accessory, for more information, see Introduction.

Petrol and diesel engines

Ignition switch with remote control key extracted/ inserted. and START/STOP ENGINE button.

IMPORTANT

Do not press in the remote control key incor- rectly turned - Hold the end with the detach- able key blade, see page 50.

1. Insert the remote control key in the ignition switch and press it in to its end position. Note that if the car is equipped with an alcolock then a breath test must first be approved before the engine can be started - see page 110.

2. Hold the clutch pedal fully depressed1. (For cars with automatic gearbox - Depress the brake pedal.)

3. Press the START/STOP ENGINE button and then release it.

The starter motor works until the engine starts or until its overheating protection triggers.

IMPORTANT

If the engine fails to start after 3 attempts - wait for 3 minutes before making a further attempt. Starting capacity increases if the battery is allowed to recover.

WARNING

Never remove the remote control key from the ignition switch after starting the engine or when the car is being towed.

WARNING

Always remove the remote control key from the ignition switch when leaving the car, and make sure that the key position is 0 - in par- ticular if there are children in the car. For information on how this works - see page 79.

NOTE

The idling speed can be noticeably higher than normal for certain engine types during cold starting. This is so that the emissions system can reach normal operating tem- perature as quickly as possible, which min- imises exhaust emissions and protects the environment.

Keyless drive*

Follow steps 23 for starting petrol and diesel engines. For more information on Keyless drive - see page 53.

NOTE

A prerequisite for the car to start is that one of the car's remote control keys with the Keyless drive* function is in the passenger compartment or cargo area.

WARNING

Never remove the remote control key from the car while driving or during towing.

Stop the engine

To switch off the engine:

Press START/STOP ENGINE - the engine stops.

1 If the car is moving then it is enough to press the START/STOP ENGINE button to start the car.

03 Your driving environment

Starting the engine

03

* Option/accessory, for more information, see Introduction. 115

If the gear selector is not in P position or if the car is moving:

Press twice on START/STOP ENGINE or hold the button depressed until the engine stops.

Steering lock

A mechanical noise can be perceived when the steering lock unlocks or locks.

The steering lock unlocks when the remote control key is in the ignition switch2 and the START/STOP ENGINE button is depressed.

The steering lock locks when the driver's door is opened after the engine has been switched off.

Key positions

For information on the remote control key's dif- ferent key positions - see page 78

Remote start - ERS*

General information on ERS

Remote start (ERS Engine Remote Start) means that the car's engine can be started remotely using the remote control key. This is so that the passenger compartment can be warmed up/cooled down before departure.

The climate control starts with the same set- tings that were being used when the car was parked.

An ERS-started engine is activated for a maxi- mum of 15 minutes, then it is switched off. After two ERS-activations the engine must be started in the normal way before ERS can be re-used.

The ERS option is only available on cars with automatic gearbox.

NOTE

Follow local/national rules/regulations on idling.

WARNING

To remote-start the engine, the following criteria must be met:

The car must be supervised

There must be no people or animals inside the car

The car must not be parked in a closed, unventilated area - the exhaust gases may seriously injure humans and ani- mals.

2 Cars with Keyless drive must have a remote control key inside the passenger compartment.

03 Your driving environment

Starting the engine

03

116

Operation

Remote control buttons for remote start.

Locking

Approach lighting

Information3

Remote starting the engine

Maximum distance for enabling remote star- ting of the engine is approx. 30 metres in unob- structed space - in addition, the car must be locked.

To remote start the engine:

1. Briefly press on the remote control key's lock button (1).

2. Follow this immediately afterwards with a long press - at least 2 seconds - on button (2).

If the conditions for ERS are fulfilled then the following takes place:

1. All direction indicators flash quickly several times.

2. The engine starts. 3. All direction indicators illuminate with a

constant glow for 3 seconds to verify that the engine has started.

NOTE

After remote starting, the car continues to be locked but with the alarm deactivated.

With PCC4 key

The light indication for Approach lighting5 flashes several times when the button is pressed and then goes to constant glow if all criteria for ERS

have been fulfilled. However, this does not mean that ERS has started the engine.

To check whether ERS has started the engine, the user can press the Information button (3) - if the engine has started, there is a light indi- cation on the button for Approach lighting (2).

Active functions

The following functions are activated with a remote started engine:

Ventilation system

Audio/video system.

Deactivated functions

The following functions are deactivated with a remote started engine:

headlamps

Position lamps

Number plate lighting

Windscreen wiper.

the engine is switched off

The following steps switch off an ERS-started engine:

The remote control key's lock button (1) is depressed

The car is unlocked

A door is opened

3 Only on PCC key, see page 49. 4 Read about the PCC key on page 49. 5 Read about Approach lighting on page 48 and 94.

03 Your driving environment

Starting the engine

03

117

Accelerator pedal or brake pedal is depressed

The gear selector is moved out of P posi- tion

There is less than approx.10 litres left in the fuel tank

Active ERS time passes 15 minutes.

When an ERS-started engine is switched off, all direction indicators illuminate with a con- stant glow for 3 seconds.

Symbols and messages in the display

In situations where the ERS function fails or is interrupted, a symbol is shown on the instru- ment panel, supplemented by an explanatory message - Follow any recommendation given.

ERS function unavailable

Message Specification

No remote start

door open

ERS unavailable because a door/tail- gate was not closed.

No remote start

car not locked

ERS unavailable because the car was not locked.

Message Specification

No remote start

low battery

ERS unavailable due to low battery volt- age. Charge the bat- tery by starting the engine.

No remote start

driver in car

ERS unavailable because someone was in the passen- ger compartment.

No remote start

engine warning

ERS unavailable due to warning message from engine. Con- tact a workshopA.

No remote start

gear not in P

ERS unavailable because gear selec- tor was not in P posi- tion.

No remote start

engine coolant

ERS unavailable due to error message from cooling sys- tem, see page 336.

Message Specification

No remote start

low fuel level

ERS unavailable because fuel level too low.

No remote start

Max 2 starts

ERS unavailable because a maximum of 2 ERS activations in succession are allowed.

A An authorised Volvo workshop is recommended.

Interrupted ERS function

Message Specification

Remote start off

low battery

ERS interrupted because battery voltage too low.

Remote start off

low fuel level

ERS interrupted because fuel level too low.

Remote start off

engine warning

ERS interrupted due to error message from engine. Con- tact a workshopA.

03 Your driving environment

Starting the engine

03

118

Message Specification

Remote start off

gear not in P

ERS interrupted because gear selec- tor is not in P posi- tion.

Remote start off

driver in car

ERS interrupted because someone is in the passenger compartment.

A An authorised Volvo workshop is recommended.

03 Your driving environment

Starting the engine external battery

03

119

Jump starting

If the battery is flat then the car can be started with current from another battery.

When jump starting the car, the following steps are recommended to avoid short circuits or other damage:

1. Insert the remote control key in key posi- tion 0, see page 78.

2. Check that the donor battery has a voltage of 12 V.

3. If the donor battery is installed in another car - switch off the donor car's engine and make sure that the two cars do not touch each other.

4. Connect one of the red jump lead's clamps to the donor battery's positive terminal (1).

IMPORTANT

Connect the start cable carefully to avoid short circuits with other components in the engine compartment.

5. Open the clips on the front cover of the battery in your car and remove the cover, see page 349.

6. Connect the red jump lead's other clamp onto the car's positive terminal (2).

7. Connect one of the black jump lead's clamps to the donor battery's negative ter- minal (3).

8. Connect the other clamp to a grounding point, e.g. right-hand engine mounting at the top, the outer screw head (4).

9. Check that the jump lead clamps are affixed securely so that there are no sparks during the starting procedure.

10. Start the engine of the "donor car" and allow it to run a few minutes at a speed slightly higher than idle approx. 1500 rpm.

11. Start the engine in the car with the dis- charged battery.

IMPORTANT

Do not touch the crocodile clips during the start procedure. There is a risk of sparks forming.

12. Remove the jump leads in reverse order - first the black and then the red. > Make sure that none of the black jump

lead's clamps comes into contact with the battery's positive terminal or the clamp connected to the red jump lead!

WARNING

The battery can generate oxyhydrogen gas, which is highly explosive. A spark can be formed if a jump lead is con- nected incorrectly, and this can be enough for the battery to explode.

The battery contains sulphuric acid, which can cause serious burns.

If sulphuric acid comes into contact with eyes, skin or clothing, flush with large quantities of water. If acid splashes into the eyes - seek medical attention immediately.

For more information on the car's battery - see page 348.

03 Your driving environment

Gearboxes

03

120

IMPORTANT

The operating temperature of the gearbox is checked in order to prevent damage to any of the drive system's components. In the event of a risk of overheating a warning symbol illuminates on the instrument panel combined with a text message - In which case, follow the recommendation given.

Manual gearbox

Gearshift pattern 5-speed gearbox.

Gearshift pattern 6-speed gearbox.

The 6-speed box is available in two versions - reverse gear position differs between them. Look at the actual gearshift pattern imprinted on the gear lever.

Depress the clutch pedal fully during each gear change.

Take your foot off the clutch pedal between gear changes.

WARNING

Always apply the parking brake when park- ing on a slope - leaving the car in gear is not sufficient to hold the car in all situation.

Gear indicator1

An essential detail in connection with environ- mental driving is to drive in the right gear and change gear in time.

The driver is assisted by an indicator - GSI (Gear Shift Indicator) - which notifies the driver when it is most advantageous to engage the next higher or lower gear in order to obtain the lowest possible fuel consumption. However, taking into consideration characteristics such as performance and vibration-free running, it may be advantageous to change gear at a higher engine speed.

Indication is made with an up or down arrow in the combined instrument panel's right-hand display.

1 Only manual gearbox for the D2 model.

03 Your driving environment

Gearboxes

03

* Option/accessory, for more information, see Introduction. 121

Reverse gear inhibitor

The reverse gear inhibitor hinders the possibil- ity of mistakenly attempting to engage reverse gear during normal forward travel.

Follow the gearing pattern printed on the gear lever and start from neutral position, N before moving it to R position.

Only engage reverse gear when the car is stationary.

NOTE

With the upper variant of the shifting pattern for 6-speed gearbox (see previous illustra- tion) - first press down the gear lever in the N position in order to engage reverse gear.

Automatic gearbox Geartronic*

D: Automatic gear positions. +/: Manual gear positions.

The information display shows the position of the gear selector using the following indica- tions: P, R, N, D, S, 1, 2, 3, 4, 5 or 6, see page 71.

Gear positions

Parking position - P

Select P when starting the engine or when the car is parked. The brake pedal must be depressed to disengage the gear selector from the P position.

The gearbox is mechanically blocked when the P position is engaged. Apply the parking brake as well, as a precaution - see page 137.

NOTE

The gear selector must be in P position to allow the car to be locked and alarmed.

IMPORTANT

The car must be stationary when position P is selected.

WARNING

Always apply the parking brake when park- ing on a slope - the automatic transmis- sion's P position is not sufficient to hold the car in all situation.

Reverse position - R

The car must be stationary when R position is selected.

Neutral position - N

No gear is engaged and the engine can be started. Apply the parking brake if the car is stationary with the gear selector in N position.

Drive position - D

D is the normal driving position. Shifting up and down takes place automatically based on the level of acceleration and speed. The car must be stationary when the gear selector is moved to D position from R position.

03 Your driving environment

Gearboxes

03

122

Geartronic Manual gear positions (+/-)

The driver can also change gear manually using the Geartronic automatic gearbox. The car engine-brakes when the accelerator pedal is released.

Manual gearshift mode is obtained by moving the lever to the side from D position to the end position at +/. The information display shifts the indication from D to one of the figures 1 6, which is equivalent to the gear that is engaged just then, see page 71.

Move the lever forwards towards + (plus) to change up a gear and release the lever, which returns to its rest position between + and .

or

Pull the lever back towards (minus) to change down a gear and release it.

The manual gearshift mode (+/) can be selected at any time while driving.

Geartronic automatically shifts down if the driver allows the speed to decrease lower than a level suitable for the selected gear, in order to avoid jerking and stalling.

To return to automatic driving mode:

Move the lever to the side to the end posi- tion at D.

NOTE

f the gearbox has a Sport programme then the gearbox will only become manual after the lever has been moved forwards or back- wards in its (-+/) position. The information display then shifts the indication from S to show which of the gears 1-6 is engaged.

Geartronic - Sport mode (S)2

The Sport programme provides sportier cha- racteristics and allows higher engine speed for the gears. At the same time it responds more quickly to acceleration. During active driving, the use of a lower gear is prioritised, leading to a delayed upshift.

Sport mode is obtained by moving the lever to the side from D position to the end position at +/. The information display shifts the indica- tion from D to S.

Sport mode can be selected at any time while driving.

Geartronic - Winter mode

It can be easier to pull away on slippery roads if 3rd gear is engaged manually.

1. Depress the brake pedal and move the gear lever from D position to the end posi-

tion at +/ - the instrument panel display shifts the indication from D to the figure 1.

2. Scroll up to gear 3 by pushing the lever forward towards + (plus) twice - the display shifts the indication from 1 to 3.

3. Release the brake and accelerate carefully.

The gearbox "winter mode" means that the car moves off with a lower engine speed and reduced engine power on the drive wheels.

Kick-down

When the accelerator pedal is pressed all the way to the floor (beyond the position normally regarded as full acceleration) a lower gear is immediately engaged. This is known as kick- down.

If the accelerator is released from the kick- down position, the gearbox automatically changes up.

Kick-down is used when maximum accelera- tion is needed, such as for overtaking.

Safety function

To prevent overrevving the engine, the gearbox control program has a protective downshift inhibitor which prevents the kick-down func- tion.

2 Only models D5 and T6.

03 Your driving environment

Gearboxes

03

123

Geartronic does not permit downshifting/kick- down which would result in an engine speed high enough to damage the engine. Nothing happens if the driver still tries to shift down in this way at high engine speed the original gear remains engaged.

When kick-down is activated the car can change one or more gears at a time depending on engine speed. The car changes up when the engine reaches its maximum speed in order to prevent damage to the engine.

Mechanical gear selector inhibitor G

02 13

51

The gear selector can be moved forward and back freely between N and D. Other positions are locked with a latch that is released with the inhibitor button on the gear selector.

With the inhibitor button depressed the lever can be moved forwards or backwards between P, R, N and D.

Automatic gear selector inhibitor

The automatic gearbox has special safety sys- tems:

Parking position (P)

Stationary car with engine running:

Keep your foot on the brake pedal when mov- ing the gear selector to another position.

Electric gear inhibitor Shiftlock Parking

position (P)

To be able to move the gear selector from P to other gear positions, the brake pedal must be depressed and the remote control key must be in position II, see page 78.

Shiftlock Neutral (N)

If the gear selector is in N position and the car has been stationary for at least 3 seconds (irre- spective of whether the engine is running) then the gear selector is locked.

To be able to move the gear selector from N to other gear positions, the brake pedal must be depressed and the remote control key must be in position II, see page 78.

Deactivate automatic gear selector

inhibitor

If the car cannot be driven, e.g. due to a flat battery, the gear selector must be moved from the P position so that the car can be moved.

Lift the rubber mat in the compartment behind the centre console and open the hatch.

Fully insert the key blade. Press the key blade down and hold (For information on the key blade, see page 50.)

Move the gear selector from the P position.

03 Your driving environment

Gearboxes

03

124 * Option/accessory, for more information, see Introduction.

Automatic gearbox Powershift*

D: Automatic gear positions. +/: Manual gear positions.

Powershift is a 6-stage automatic gearbox that has double mechanical clutch discs in contrast to a conventional automatic gearbox. A con- ventional automatic gearbox has a hydraulic torque converter instead that transfers power from engine to gearbox.

Powershift transmission operates in the same way and has similar controls and functions as the Geartronic automatic transmission, descri- bed in the previous section.

Powershift or Geartronic?

In the event of uncertainty as to whether or not the car is equipped with Powershift transmis-

sion, this can be verified by checking the des- ignation on the transmission's label under the bonnet - see page 372. The designa- tion MPS6 means that it is Powershift trans- mission otherwise it is Geartronic automatic transmission.

HSA

The HSA (Hill Start Assist) function means that the pressure in the brake system remains for several seconds while the foot is moved from the brake pedal to the accelerator pedal before setting off or reversing uphill.

The temporary braking effect releases after several seconds or when the driver acceler- ates.

To bear in mind

The transmission's double clutch has overload protection that is activated if it becomes too hot, e.g. if the car is held stationary with the accelerator pedal on an uphill gradient for a long time.

Overheated transmission causes the car to shake and vibrate, and the warning symbol illu- minates and the information display shows a message. The transmission can also overheat during slow driving in queues (10 km/h or

slower) on an uphill gradient, or with a trailer hitched. The transmission cools down when the car is stationary, with foot brake depressed and the engine running at idling speed.

Overheating during slow driving in queues can be avoided by driving in stages: Stop the car and wait with your foot on the brake pedal until there is a moderate distance to the traffic ahead, drive forward a short distance, and then wait another moment with your foot on the brake pedal.

IMPORTANT

Use the foot brake to hold the car stationary on an uphill gradient - do not hold the car with the accelerator pedal. The gearbox could then overheat.

For important information regarding Powershift transmission and towing - see page 311.

Text message and action

In some situations the display may show a message at the same time as a symbol is illu- minated.

03 Your driving environment

Gearboxes

03

125

Symbol Display Driving characteristics Action

Transm. overheat brake to hold Difficulty in maintaining even speed at con- stant engine speed.

Transmission overheated. Keep the car stationary using the foot brake.A

Transm. overheat park safely Significant pulling in the car's traction. Transmission overheated. Park the car immediately in a safe manner.A

Transm. cooling let engine run No drive due to overheated gearbox. Transmission overheated. For fastest cool- ing: Run the engine at idling speed with the gear lever in the N or P position until the message clears.

A For fastest cooling: run the engine at idling speed with the gear lever in the N or P position, until the message clears.

The table shows three steps with an increased degree of seriousness should the transmission become too hot. In parallel with the display text the driver is also advised that the car's elec- tronics are temporarily changing the driving characteristics. Follow the instructions on the information display where appropriate.

NOTE

The table's examples are no indication that the car is defective but instead show that a safety function has been activated inten- tionally to prevent damage to one of the car's components.

WARNING

If a warning symbol combined with the text Transm. overheat park safely is ignored then the heat in the gearbox may become so high that the power transmission between engine and gearbox is temporarily halted in order to prevent the clutch from malfunctioning - the car then loses drive and is stationary until gearbox temperature has cooled to an acceptable level.

For more possible display messages with their respective proposals for solutions concerning automatic transmission, see page 198.

A display text clears automatically after the action has been carried out or after one press on the indicator stalk OK button.

03 Your driving environment

DRIVe Start/Stop*

03

126 * Option/accessory, for more information, see Introduction.

Quieter and cleaner

Environmental care is one of Volvo Car Corpo- ration's core values and it influences all of our operations. This target-orientation has resulted in the DRIVe vehicle series whose concept consists of an interaction between several sep- arate energy-saving functions, all with the common purpose of reducing fuel consump- tion, which in turn contributes to reduced exhaust emissions.

General information on Start/Stop

The engine is switched off - it becomes quieter and cleaner....

Some engine and gearbox combinations come fitted with a Start and Stop function which engages in the event of e.g. stationary traffic or waiting at traffic lights - the engine is then switched off temporarily and restarts automat- ically when the journey is due to continue.

The Start/Stop function gives the driver the opportunity for a more active environmentally conscious way of driving the car by means of being able to allow the engine to stop auto- matically, whenever appropriate.

Function and operation

Start/Stop On/Off.

Illuminates briefly on activation and for text messages.

The engine is auto-stopped.

The Start/Stop function is activated automatically when the engine is

started with the key. The driver is alerted to the function by means of this symbol on the instru- ment panel illuminating briefly, the display text Auto Start-Stop ON is shown and the green lamp for the On/Off button illuminates.

All of the car's normal systems such as lighting, radio, etc. work as normal even with an engine that has stopped automatically, except that some equipment may have the function tem- porarily reduced, e.g. the climate control sys-

03 Your driving environment

DRIVe Start/Stop*

03

* Option/accessory, for more information, see Introduction. 127

tem's fan speed or extremely high volume on the audio system.

Auto-stopping the engine

The following is required for the engine to auto- stop:

ConditionsA M/AB

Declutch, set the gear lever in neutral position and release the clutch pedal - the engine is switched off.

M

Stop the car with the foot brake and then keep your foot on the pedal - the engine stops automat- ically.

A

A The XC60 only has Start/Stop on manual gearbox. B M = Manual gearbox, A = Automatic gearbox.

The AUTO START symbol on the information display illumi- nates as verification and reminder that the engine is has stopped automatically.

Auto-starting the engine

ConditionsA M/AB

With the gear lever in neutral posi- tion: Depress the clutch pedal or press the accelerator pedal - the engine starts. Engage a suitable gear and continue the journey.

M

The following option is also avail- able on a downhill gradient:

Release the foot brake and let the car move off - the engine starts automatically when the speed exceeds normal walking pace.

M

Release the foot pressure on the foot brake - the engine starts automatically and the journey can continue.

A

A The XC60 only has Start/Stop on manual gearbox. B M = Manual gearbox, A = Automatic gearbox.

Deactivating the Start/Stop function

In certain situations, it may advisable to temporarily switch off the automatic Start/Stop function - this is carried out by pressing this button once, at which point the button's lamp goes out.

Disengaged Start/Stop func- tion is indicated by the infor- mation display's symbol going out and the message Auto Start-Stop OFF being displayed for about 5 seconds - while the button's lamp goes out at the same time.

The Start/Stop function is disengaged until it is reactivated with the button or until the next time the engine is started with the key.

Limitations

The engine does not auto-stop

Even if the Start/Stop function is activated, the engine does not stop automatically if:

ConditionsA M/AB

the car has not achieved approx. 5 km/h (= fast walking pace) first after a key start or the last auto-stop.

M + A

the driver has opened the seat- belt's buckle.

M + A

03 Your driving environment

DRIVe Start/Stop*

03

128 * Option/accessory, for more information, see Introduction.

ConditionsA M/AB

the capacity of the battery is below the minimum permissible level.

M + A

the engine does not have normal operating temperature.

M + A

outside temperature is below freezing point or above approx. 30 C.

M + A

the environment in the passenger compartment differs from the preset values - indicated by the ventilation fan running at a high speed.

M + A

the car is reversed. M + A

battery temperature is below freezing point or above approx. 55 C.

M + A

the driver makes greater steering wheel movements.

M + A

ConditionsA M/AB

the exhaust system's particulate filter is full - the temporarily dis- engaged Start/Stop function is reactivated once an automatic cleaning cycle has been per- formed (see page 298).

M + A

the road is very steep. M + A

a trailer is connected electrically to the cars electrical system.

M + A

the atmospheric air pressure is less than equivalent to 1500-2000 metres above sea level - the cur- rent air pressure varies with the prevailing weather conditions.

A

adaptive cruise control Queue Assist is activated.

A

the drivers door has been opened with the gear selector in D position.

A

the gear selector is moved out of the D position to S positionC or "+/-".

A

A The XC60 only has Start/Stop on manual gearbox. B M = Manual gearbox, A = Automatic gearbox. C Sport mode.

The engine auto-starts

An engine that has stopped automatically may restart in some cases without the driver having decided that the journey should continue. In the following cases the engine also starts auto- matically if the driver has not depressed the clutch pedal:

ConditionsA M/AB

Misting forms on the windows. M + A

The environment in the passen- ger compartment deviates from the preset values.

M + A

The outside temperature falls below freezing point or exceeds approx. 30 C.

M + A

There is a temporarily high cur- rent take-off or battery capacity drops below the lowest permissi- ble level.

M + A

Repeated pumping of the brake pedal.

M + A

The car starts to roll - faster than the equivalent normal walking pace.

M

03 Your driving environment

DRIVe Start/Stop*

03

* Option/accessory, for more information, see Introduction. 129

ConditionsA M/AB

The driver's belt lock is opened with the gear selector in D or N position.

A

Steering wheel movements. A

The gear selector is moved from the D position to "+/-" or R.

A

The driver's door is opened with the gear selector in D position - a "ping" sound and text message inform that the Start/Stop func- tion is active.

A

A The XC60 only has Start/Stop on manual gearbox. B M = Manual gearbox, A = Automatic gearbox.

WARNING

Do not open the bonnet when the engine has stopped automatically - the engine may suddenly start automatically. First switch off the engine as normal using the START/ STOP ENGINE button before opening the bonnet.

The engine does not auto-start

In the following cases the engine does not auto-start after having auto-stopped:

ConditionsA M/AB

A gear is engaged without declutching - a display text prompts the driver to set the gear lever in neutral position in order to enable automatic starting.

M

The driver is unrestrained, the gear selector is in P position and the drivers door is open - a nor- mal engine start must take place.

A

The gear selector is moved to P position - press the START/

STOP ENGINE button to restart the engine.

If the driver's door is opened before starting the engine with the START/STOP ENGINE but- ton, the Start/Stop function is switched off.

A

A The XC60 only has Start/Stop on manual gearbox. B M = Manual gearbox, A = Automatic gearbox.

Involuntary engine stop with manual

gearbox

In the event that a start-up fails and the engine stops, proceed as follows:

1. Depress the clutch pedal again - the engine starts automatically.

2. In certain cases the gear lever must be set in neutral position. The information display then shows the text Put gear in neutral

More information and settings

The MY CAR menu system in the car includes instructions which explain parts of the DRIVe concept along with several possible settings and options - see page 201.

03 Your driving environment

DRIVe Start/Stop*

03

130 * Option/accessory, for more information, see Introduction.

Text message

In combination with this indicator lamp the Start/Stop function may dis-

play text messages on the information display for certain situations. For some of them there is a recommended action that should be per-

formed. The following table shows some examples.

Symbol MessageA Info/Action M/AB

Auto Start-Stop ON Illuminates for about 5 seconds after Start/Stop has been activated.

M + A

Auto Start-Stop OFF Illuminates for about 5 seconds after Start/Stop has been switched off.

M + A

Auto Start-Stop serv. required Start/Stop is not operational. Contact a workshop - an authorised Volvo workshop is recommended.

M + A

Engine management system An automatic function check is carried out. M + A

AUTO-

STOP

Engine in Auto Start The engine is ready to start automatically - waiting for the brake or clutch pedal to be depressed.

M

Press Start button The engine will not start automatically - start the engine as normal with the START/STOP ENGINE button.

M

Depress clutch pedal to start The engine is ready to auto-start - waiting for the clutch pedal to be depressed.

M

Depress the foot brake to start The engine is ready to auto-start - waiting for the brake pedal to be depressed.

M

Press brake and clutch to start The engine is ready to auto-start - waiting for the brake or clutch pedal to be depressed.

M

03 Your driving environment

DRIVe Start/Stop*

03

* Option/accessory, for more information, see Introduction. 131

Symbol MessageA Info/Action M/AB

Put gear in neutral Gear is engaged without declutching - disengage and set the gear lever in neutral position.

M

AUTO-

STOP

Engine in Auto Start The engine is ready to start automatically - waiting for the brake pedal to be released.

A

Select P or N to start Start/Stop has been deactivated - move the gear selector to N or P position and start the engine as normal with the START/STOP ENGINE button.

A

Press Start button The engine will not start automatically - start the engine as normal with the START/STOP ENGINE button and the gear selector in P or N.

A

A The XC60 only has Start/Stop on manual gearbox. B M = Manual gearbox, A = Automatic gearbox.

If a message does not go out following com- pletion of the action then a workshop should be contacted - an authorised Volvo workshop is recommended.

03 Your driving environment

All-wheel drive AWD*

03

132 * Option/accessory, for more information, see Introduction.

All Wheel Drive is always available

All Wheel Drive means that the car is driving all four wheels at the same time.

The power is automatically distributed between the front and rear wheels. An elec- tronically controlled clutch system distributes the power to the wheels that have the best grip on the current road surface. This provides the best traction and prevents wheel spin. Under normal driving conditions, the majority of power is transmitted to the front wheels.

All Wheel Drive improves driving safety in rain, snow and icy conditions.

03 Your driving environment

Foot brake

03

133

General

The car is equipped with two brake circuits. If one brake circuit is damaged then this will mean that the brakes engage at a deeper level and harder pressure on the pedal is needed to produce the normal braking effect.

The driver's brake pedal pressure is assisted by a brake servo.

WARNING

The brake servo only works when the engine is running.

If the brake is used when the engine is switched off then the pedal will feel stiff and more force must be used to brake the car.

In very hilly terrain or when driving with a heavy load the brakes can be relieved by using engine braking. Engine braking is most efficiently used if the same gear is used downhill as up.

For more general information on heavy loads on the car, see page 378.

Anti-lock braking system

The car is equipped with ABS (Anti-lock Braking System) which prevents the wheels from locking during braking. This means the ability to steer is maintained and it is easier to swerve to avoid a hazard for example. Vibration

may be felt in the brake pedal when this is engaged and this is normal.

A short test of the ABS system is made auto- matically after the engine has been started when the driver releases the brake pedal. A further automatic test of the ABS system may be made when the car reaches 10 km/h. The test may be experienced as pulses in the brake pedal.

Emergency brake lights and automatic

hazard warning flashers

Emergency brake lights are activated to alert vehicles behind about sudden braking. The function means that the brake light flashes instead of - as in normal braking - shining with a constant glow.

Emergency brake lights are activated at speeds above 50 km/h if the ABS system is working and/or in the event of sudden braking. After the car's speed has been slowed below 10 km/h the brake light returns from flashing to the normal constant glow - while at the same time the hazard warning flashers are activated, and they flash until the driver changes engine speed with the accelerator pedal or they are deactivated with their button, see page 92.

Cleaning the brake discs

Coatings of dirt and water on the brake discs may result in delayed brake function. This delay is minimised by cleaning the brake linings.

Manual cleaning is advisable with wet road sur- faces, prior to long-stay parking and after the car has been washed. Carry this out by braking gently during a short period while en route.

Emergency Brake Assistance

Emergency Brake Assistance EBA (Emergency Brake Assist) helps to increase brake force and so reduce braking distance. EBA detects the driver's braking style and increases brake force as necessary. The brake force can be rein- forced up to the level when the ABS system is engaged. The EBA function is interrupted when the pressure on the brake pedal is reduced.

NOTE

When EBA is activated the brake pedal low- ers slightly more than usual, depress (hold) the brake pedal as long as necessary. If the brake pedal is released then all braking ceases.

Maintenance

To keep the car as safe and reliable as possi- ble, follow the Volvo service intervals as speci-

03 Your driving environment

Foot brake

03

134

fied in the Service and Warranty Booklet, see page 332.

IMPORTANT

The wear on the brake system's compo- nents must be checked regularly.

Contact a workshop for information about the procedure or engage a workshop to carry out the inspection - an authorised Volvo workshop is recommended.

Symbols in the combined instrument

panel

Symbol Specification

Constant glow Check the brake fluid level. If the level is low, fill with brake fluid and check for the cause of the brake fluid loss.

Constant glow for 2 seconds when the engine is started There was a fault in the brake system's ABS function when the engine was last running.

WARNING

If and illuminate at the same time, there may be a fault in the brake sys- tem.

If the level in the brake fluid reservoir is nor- mal at this stage, drive carefully to the near- est workshop and have the brake system checked - an authorised Volvo workshop is recommended.

If the brake fluid is under the MIN level in the brake fluid reservoir, do not drive further before topping up the brake fluid.

The reason for the loss of brake fluid must be investigated.

03 Your driving environment

HDC Hill Descent Control

03

135

General

HDC can be compared to an automatic engine brake. When you release the accelerator on downhill gradients the car is normally braked by means of the engine striving for low engine idling speeds, so-called engine braking. But the steeper the road and the more load there is in the car, the faster the car rolls despite engine braking. In order to then reduce speed the driver has to assist using the footbrake.

The function makes it possible to increase/ reduce speed on steep downhill gradients, with a foot only on the accelerator pedal, without using the footbrake. The sensitivity of the accelerator pedal decreases and becomes more precise by means of the full actuation of the pedal being restricted to adjusting engine speed within a limited range. The brake system brakes itself and provides the car with a low and even speed, so allowing the driver to fully focus on steering.

HDC is particularly helpful on steep gradients with an uneven road surface and slippery sec- tions. E.g. when launching a boat on a trailer from a ramp.

WARNING

HDC does not work in all situations, but is instead only intended to be supplementary assistance.

The driver always has ultimate responsibility that the car is driven safely.

Function

HDC is engaged or disengaged using a switch on the centre console. An indicator lamp in the button illuminates when the function is switched on. When HDC is operating the

symbol illuminates and the display shows Hill descent control ON.

The function only operates in first gear position and in reverse gear. For an automatic gearbox,

gear position 1 must be selected, which is shown with the figure 1 in the trip computer display, see page 122.

NOTE

HDC cannot be activated in an automatic gearbox with the gear selector in position D.

Operation

HDC allows the car to roll at a maximum of 10 km/h forwards with engine braking and 7 km/h backwards. However, any speed within the gear's speed register can be selected using the accelerator pedal. When the accelerator pedal is released, the car is braked quickly to 10 or 7 km/h respectively, irrespective of the hill's gradient and without the need for the foot- brake.

The brake lights come on automatically when the function is operating. The driver can brake or stop the car at any time by using the foot- brake.

HDC is deactivated:

03 Your driving environment

HDC Hill Descent Control

03

136

with the on/off button on the centre con- sole

if a gear higher than 1 is selected on a manual gearbox

if a gear higher than 1 is selected on an automatic gearbox, or if the gear selector is moved to position D.

The function can be disengaged at any time. If it takes place on a steep downhill gradient then the braking effect will not release directly, but slowly instead.

NOTE

With HDC activated you may experience a delay between acceleration pedal activation and engine response.

03 Your driving environment

Parking brake

03

137

General

Function

A faint electric motor noise can be heard when the electrical parking brake is being applied. The noise can also be heard during the auto- matic function checking of the parking brake.

If the car is stationary when the parking brake is applied then it only acts on the rear wheels. If it is applied when the car is moving then the normal foot brake is used, i.e. the brake acts on all four wheels. Brake function changes over to the rear wheels when the car is almost sta- tionary.

Low battery voltage

If the battery voltage is too low then the parking brake can neither be released nor applied. Connect a donor battery if the battery voltage is too low, see page 119.

Applying the parking brake

Parking brake control - apply.

1. Press the foot brake pedal down firmly.

2. Press the control. > The combined instrument panel symbol

starts flashing - once there is a constant glow it is applied.

3. Release the foot brake pedal and make sure that the car is at a standstill position.

When parking the vehicle, always engage 1st gear (for manual gearbox) or put the gear selector in position P (for automatic gearbox).

In an emergency the parking brake can be applied when the vehicle is moving by depress- ing the control. When the control is released or

the accelerator pedal is depressed the braking is interrupted.

NOTE

In the event of emergency braking at speeds above 10 km/h a signal sounds during the braking procedure.

Parking on a hill

If the car is parked facing uphill:

Turn the wheels away from the kerb.

If the car is parked facing downhill:

Turn the wheels towards the kerb.

WARNING

Always apply the parking brake when park- ing on a slope - leaving the car in gear, or in P if it has automatic transmission, is not suf- ficient to hold the car in all situation.

03 Your driving environment

Parking brake

03

138

Disengaging the parking brake

Parking brake control - release.

Cars with manual gearbox

Releasing manually

1. Insert the remote control key in the ignition switch.1

2. Press the foot brake pedal down firmly.

3. Pull the control. > The parking brake releases and the

combined instrument panel symbol goes out.

NOTE

The parking brake can also be released manually by depressing the clutch pedal instead of the brake pedal. Volvo recom- mends the use of the brake pedal.

Releasing automatically

1. Start the engine.

2. Engage 1st gear or reverse gear.

3. Ease up the clutch and depress the accel- erator. > The parking brake releases and the

combined instrument panel symbol goes out.

Cars with automatic gearbox

Releasing manually

1. Insert the remote control key in the ignition switch1.

2. Press the foot brake pedal down firmly.

3. Pull the control. > The parking brake releases and the

combined instrument panel symbol goes out.

Releasing automatically

1. Put the seatbelt on.

2. Start the engine.

3. Press the foot brake pedal down firmly.

4. Move the gear selector to position D or R and depress the accelerator. > The parking brake releases and the

combined instrument panel symbol goes out.

NOTE

For safety reasons, the parking brake is only released automatically if the engine is run- ning and the driver is wearing a seatbelt. The parking brake is released immediately on cars with automatic gearbox when the accelerator pedal is depressed and the gear selector is in position D or R.

Heavy load uphill

A heavy load, such as a trailer, can cause the car to roll backward when the parking brake is released automatically on a steep incline. Avoid this by depressing the control while driv- ing off. Release the control when the engine achieves traction.

1 For a car with the Keyless system: Press START/STOP ENGINE.

03 Your driving environment

Parking brake

03

139

Replacing the brake linings

The rear brake linings must be replaced at a workshop due to the design of the electric

parking brake - an authorised Volvo workshop is recommended.

Symbols and messages in the display

Symbol Message Meaning/Action

"Message" Read the message on the information display.

A flashing symbol indicates that the parking brake is applied.

If the symbol flashes in any other situation then this means that a fault has arisen. Read the message on the information display.

Park brake not fully

released

A fault is preventing the parking brake from being released - Try to apply and release the brake.

If the fault persists after a few attempts: Visit a workshop - an authorised Volvo workshop is recom- mended.

Note: A warning signal sounds if the journey is continued with this error message.

03 Your driving environment

Parking brake

03

140

Symbol Message Meaning/Action

Parking brake not applied A fault is preventing the parking brake from being applied - Try to release and apply the brake.

If the fault persists after a few attempts: Visit a workshop - an authorised Volvo workshop is recom- mended.

The message is also illuminated on cars with manual gearbox when the car is driven at low speed with the door open in order to alert the driver that the parking brake may have been unintentionally disengaged.

Parking brake Service

required

A fault has arisen - Try to apply and release the brake.

If the fault persists after a few attempts: Visit a workshop - an authorised Volvo workshop is recom- mended.

If the car has to be parked before the fault has been rectified then the wheels must be turned as if parking on a hill and 1st gear engaged (manual gearbox) or the gear selector must be in position P (automatic gearbox).

03 Your driving environment

HomeLink *

03

* Option/accessory, for more information, see Introduction. 141

General

HomeLink 1 is a programmable remote control which can remotely control up to three different devices (e.g. garage door opener, alarm sys- tem, outdoor lighting and indoor lighting etc.) and in doing so replace their remote controls. For more information on HomeLink , visit: www.homelink.com or ring 00 8000 466 354 65 (or premium rate phone number, +49 6838 907 277).

WARNING

If HomeLink is used to operate a garage door or gate, make sure that there is no-one in the vicinity of the door or gate while it is moving.

The car should remain outside the garage while a garage door opener is being programmed.

Do not use HomeLink for any garage door that does not have safety stop and safety reverse.

Save the original remote controls for future programming (e.g. when changing to another car or for use in another vehicle). It is also rec- ommended that the programming for the but- tons is deleted when the car is sold. See the section "Resetting the HomeLink buttons" on page 142.

Programming HomeLink

NOTE

In certain vehicles the ignition must be switched on or in "accessory position" before HomeLink can be programmed or used. If possible, fit new batteries in the remote control that shall be replaced by HomeLink for faster programming and improved transmission of the radio signal. The HomeLink buttons should be reset before programming. When this has been done HomeLink is set in "learn mode" and ready for programming.

1. Aim the original remote control towards the HomeLink button to be programmed and hold it 5-14 cm from the button. Do not obstruct the indicator lamp on HomeLink .

2. Depress the button on the original remote control and the button to be programmed on HomeLink simultaneously. Do not release the buttons until the indicator lamp has changed over from slow to rapid flash- ing. Both the buttons must be released when the indicator lamp flashes quickly.

1 HomeLink and the HomeLink house symbol are registered trademarks of Johnson Controls, Inc.

03 Your driving environment

HomeLink *

03

142 * Option/accessory, for more information, see Introduction.

3. Depress the HomeLink button being

programmed, hold it depressed for

5 seconds and then release it. Repeat if necessary until the garage door is acti- vated. If the door is not activated, press the programmed HomeLink button and hold it depressed and check the indicator lamp. > Constant glow: The indicator lamp illu-

minates with a constant glow when the button is kept depressed, this indicates that the programming is complete. The garage door, gate or similar should now be activated when the pro- grammed HomeLink button is depressed.

Glow not constant: The indicator lamp flashes quickly for approx. 2 seconds and then changes over to a constant glow. In which case, continue with the programming steps 4-6 in order to com- plete the programming of a device with rolling code (usually a garage door opener).

4. Locate the "programming button2" on the receiver for the garage door for example, normally located close to the antenna's bracket on the receiver.

5. Depress and release the receiver's "pro- gramming button". The button flashes for approx. 30 seconds and the next step must be carried out within this period.

6. While the receiver's "programming button" is still flashing, press the button on HomeLink being programmed and hold it depressed for approx. 2 seconds and then release it. Repeat the press/hold/release sequence up to 3 times to conclude the programming.

Operation

When HomeLink is fully programmed it can be used in place of the separate original remote controls.

Press the programmed button and hold it depressed until the garage door, alarm system, etc. is activated (may take several seconds). Naturally the original remote controls can still be used in parallel with HomeLink if required.

NOTE

If the ignition is switched off, HomeLink will work for 30 minutes after the driver's door has been opened.

If programming problems persist, contact HomeLink on: www.homelink.com or ring 00 8000 466 354 65 (or premium rate phone number +49 6838 907 277).

Resetting the HomeLink buttons

It is only possible to reset all of the HomeLink buttons at the same time, not each button individually. However, individual but- tons can be reprogrammed, see the following section "Programming individual buttons".

1. Depress the two outer buttons on HomeLink and do not release until the indicator lamp starts to flash.

2. Release the buttons. > HomeLink is now set in so-called

"learn mode" and is ready to be reprog- rammed, see section "Programming HomeLink" on page 141.

2 Button designation and colour vary depending on manufacturer.

03 Your driving environment

HomeLink *

03

* Option/accessory, for more information, see Introduction. 143

Programming individual buttons

To reprogram an individual HomeLink button, proceed as follows:

1. Depress the required button and do not

release.

2. When the indicator lamp on HomeLink starts to flash, after approx. 20 seconds, start with step 1 in section "Programming HomeLink" on page 141.

For more information or to leave comments about HomeLink , visit: www.homelink.com or ring 00 8000 466 354 65 (or premium rate phone number +49 6838 907 277).

G 00 00 00

144 * Option/accessory, for more information, see Introduction.

DSTC Stability and traction control system....................................... 146 Road sign information - RSI*................................................................ 148 Cruise control*...................................................................................... 150 Adaptive cruise control*........................................................................ 152 Distance Warning*................................................................................. 162 City Safety......................................................................................... 165 Collision Warning with Auto Brake & Pedestrian Protection*............... 170 Driver Alert System*.............................................................................. 178 Driver Alert System - DAC*................................................................... 179 Driver Alert System - LDW*................................................................... 182 Park assist syst*.................................................................................... 185 Park assist camera*.............................................................................. 188 BLIS* Blind Spot Information System................................................ 191

DRIVER SUPPORT

04 Driver support

DSTC Stability and traction control system

04

146 * Option/accessory, for more information, see Introduction.

General information on DSTC

The stability and traction control system, DSTC (Dynamic Stability & Traction Control) helps the driver to avoid skidding and improves the car's traction.

The activation of the system during braking may be noticed as a throbbing sound. The car may accelerate slower than expected when the accelerator pedal is depressed.

Active Yaw Control

The function limits the driving and brake force of the wheels individually in order to stabilise the car.

Spin Control

The function prevents the driving wheels from spinning against the road surface during accel- eration.

Traction control system

The function is active at low speed and trans- fers power from the driving wheel that is spin- ning to the one that is not.

Engine drag control - EDC

EDC (Engine Drag Control) prevents involun- tary wheel locking, e.g. after shifting down or

engine braking when driving in low gears on slippery road surfaces.

Involuntary wheel locking while driving can, amongst other things, impair the driver's ability to steer the car.

Trailer Stability Assist* - TSA

The function serves to stabilise the car and trailer combination if it begins to snake, see page 310.

NOTE

The function is deactivated if the driver selects Sport mode.

Operation

Selection of level - Sport mode

The DSTC system is always activated - it can- not be deactivated.

However, the driver can select the Sport mode, which allows for a more active driving experi- ence. In Sport mode the system detects whether the accelerator pedal, steering wheel movements and cornering are more active than in normal driving and then allows controlled

skidding with the rear section up to a certain level before it intervenes and stabilises the car.

If the driver stops a controlled skid by releasing the accelerator pedal then the DSTC system intervenes and stabilises the car.

With Sport mode, maximum traction is obtained if the car has become stuck, or when driving on a loose surface - e.g. sand or deep snow.

Proceed as follows to select Sport mode:

1. Press the centre console button MY CAR

and search in the display screen's menu system and locate My XC60 DSTC. (For information on the menu system, see page 200).

2. Uncheck the box and back out of the menu system with EXIT. > The system then allows a more sporty

driving style.

The Sport mode is active until the driver dese- lects it or until the engine is switched off - after the engine is started the next time the DSTC system is back in its normal mode again.

04 Driver support

DSTC Stability and traction control system

04

147

Symbols and messages in the display

Symbol Message Specification

DSTC Temporarily OFF DSTC system temporarily reduced due to excessive brake disc temperature. - The function is reac- tivated automatically when the brakes have cooled.

DSTC Service required DSTC system disengaged.

Stop the car in a safe place, switch off the engine and start it again.

Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

and

"Message" There is a message on the speedometer's display - Read it!

Constant glow for 2 seconds. System check when the engine is started.

Flashing light. DSTC system is being activated.

Sport mode is activated.

04 Driver support

Road sign information - RSI*

04

148 * Option/accessory, for more information, see Introduction.

General information on RSI

Examples of readable speed signs1.

The Road sign information function (RSI Road Sign Information) helps the driver to remember which road signs the car has passed through information on - among other things - the cur- rent speed, the start/end of a motorway or road, and when overtaking is prohibited.

If a sign for both a motorway/road for motor- ised traffic and a sign showing the maximum permitted speed are passed, RSI decides to show the sign symbol for maximum permitted speed.

WARNING

RSI does not work in all situations but is designed merely as a supplementary aid.

The driver always bears ultimate responsi- bility for ensuring that the vehicle is driven safely and that applicable road traffic rules and regulations are followed.

Operation

Recorded speed information.

When RSI has recorded a road sign with an imposed speed, the sign is displayed as a sym- bol on the instrument panel.

Together with the symbol for the current speed limit, a sign showing that overtaking is prohibited may also be dis- played where appropriate.

Additional signs

Examples of additional signs1.

Sometimes different speed limits are signpos- ted for the same road - an additional sign then indicates the circumstances under which the different speeds apply. The road section may be particularly susceptible to accidents in rain and/or fog, for example.

An additional sign relating to rain is displayed only if the windscreen wipers are in use.

1 Road signs which are displayed in the instrument panel are dependent on the market - the illustration only shows a few examples.

04 Driver support

Road sign information - RSI*

04

* Option/accessory, for more information, see Introduction. 149

The speed applicable on an exit is indicated by means of an additional sign containing an arrow. The arrow is dis- played under the symbol showing the speed.

Speed signs linked to this type of additional sign are displayed only if the driver is using the direction indicator.

Limited distance or time of day

Some speeds are applicable only after a specific distance or at a certain time of day. The driver's attention is drawn to the situation by means of an empty frame under the sym- bol showing the speed.

Setting in MY CAR

Options in MY CAR.

The instrument panels speed symbol display can be disabled. To deactivate the RSI func- tion:

Uncheck the option in MY CAR Settings

Car settings Road Sign

Information and go back by pressing EXIT, see page 201.

Speed warning

The driver can opt to receive a warning (Speed Alert) when the applicable speed limit is excee- ded by 5 km/h or more. This warning is given by the symbol showing the applicable maxi- mum speed temporarily flashing when this speed is exceeded.

To activate speed warning:

Check speed warning in MY CAR

Settings Car settings Speed alert

and go back by pressing EXIT, see page 201.

Limitations

The RSI function's camera sensor is limited - just like the human eye. Find out more about this on page 175.

Signs which indirectly provide information on a prevailing speed limit, e.g. name signs for towns/districts, are not recorded by the RSI function.

Here are several examples of what can disrupt the function:

Faded signs

Signs positioned on bends

Rotated or damaged signs

Concealed or poorly positioned signs.

Signs completely or partly covered with frost, snow and/or dirt.

04 Driver support

Cruise control*

04

150 * Option/accessory, for more information, see Introduction.

General information on CC

The cruise control (CC Cruise Control) helps the driver maintain an even speed, resulting in a more relaxed driving on motorways and long, straight roads in regular traffic flows.

WARNING

The driver must always be observant with regard to the traffic conditions and intervene when the cruise control is not maintaining a suitable speed and/or suitable distance.

The driver always bears ultimate responsi- bility for ensuring that the vehicle is driven safely.

Operation

G 02

14 11

Steering wheel keypad and display.

Cruise control - On/Off.

Standby mode ceases and the stored speed is resumed.

Standby mode

Activate and adjust the speed.

Selected speed (in brackets = Standby mode).

Activating and setting the speed

To enable cruise control:

Press the steering wheel button (1).

> The symbol illuminates in the display (5) and the brackets around (---) km/h show that cruise control is set in standby mode.

To activate cruise control:

At the required speed - press the steering wheel button or .

> Current speed is stored in the memory - the display text (---) km/h changes to show the selected speed, e.g. 100 km/h, without brackets.

NOTE

Cruise control cannot be engaged at speeds below 30 km/h.

Changing the speed

To change the stored speed:

Press briefly on the steering wheel button, or - most recent presses are stored

in memory.

A temporary increase in speed with the accel- erator pedal, e.g. during overtaking, does not affect the cruise control setting - the car returns to the set speed when the accelerator pedal is released.

NOTE

If any of the Cruise Control buttons are held down for more than approx. 1 minute, it is blocked and disabled. To be able to reacti- vate Cruise Control, the car must be stop- ped and the engine restarted.

04 Driver support

Cruise control*

04

* Option/accessory, for more information, see Introduction. 151

Temporary deactivation - standby mode

To temporarily disengage cruise control and set it in standby mode:

Press the steering wheel button .

> Set speed is shown in brackets in the dis- play (5), e.g. (100) km/h.

Automatic standby mode

Cruise control is temporarily disengaged and set in standby mode if:

wheels lose traction

the foot brake is used

speed falls below approx. 30 km/h

the clutch pedal is depressed

the gear selector is moved to neutral posi- tion (automatic gearbox)

the driver maintains a speed higher than the set speed for longer than 1 minute.

The driver must then regulate the speed.

Resume set speed

Cruise control in standby mode is re-activated with one press on the steering wheel button

- the speed is then set to the last stored speed.

NOTE

A significant increase in speed may arise after the speed has been resumed with .

Deactivate

The cruise control is switched off with the steering wheel button (1) or by switching off the engine - the set speed is deleted from the memory and cannot be resumed with the button.

04 Driver support

Adaptive cruise control*

04

152 * Option/accessory, for more information, see Introduction.

General information on ACC

The adaptive cruise control (ACC Adaptive Cruise Control) helps the driver maintain a safe distance from the vehicle ahead. An adaptive cruise control provides a more relaxing driving experience on long journeys on motorways and long straight main roads in smooth traffic flows.

The driver sets the desired speed and time interval to the car in front. When the radar detector detects a slower vehicle in front of the car, the speed is automatically adapted to that. When the road is clear again the car returns to the selected speed.

If the adaptive cruise control is switched off or set to the standby mode and the car comes too close to a vehicle in front, then the driver is warned by Distance Warning (see page 162) about the short distance.

WARNING

The driver must always be observant with regard to the traffic conditions and intervene when the adaptive cruise control is not maintaining a suitable speed or suitable dis- tance.

The adaptive cruise control cannot handle all traffic, weather and road conditions.

Read the whole of this section for informa- tion on the limitations of the adaptive cruise control. The driver must be familiar with this information before using the adaptive cruise control.

The driver always bears responsibility for maintaining the correct distance and speed, even when the adaptive cruise control is being used.

IMPORTANT

Maintenance of adaptive cruise control components must only be performed at a workshop - an authorised Volvo workshop is recommended.

Automatic gearbox

Cars with automatic gearbox have enhanced functionality with the adaptive cruise control's Queue Assistant, see page 156.

Function

Function overview1.

Warning lamp - braking by driver required

Steering wheel keypad

Radar sensor

Adaptive cruise control consists of a cruise control system and a coordinated spacing sys- tem.

1 NOTE: The illustration is schematic - details may differ depending on car model.

04 Driver support

Adaptive cruise control*

04

* Option/accessory, for more information, see Introduction. 153

WARNING

Adaptive cruise control is not a collision avoidance system. The driver must inter- vene if the system does not detect a vehicle in front.

The adaptive cruise control does not brake for humans or animals, and not for small vehicles such as bicycles and motorcycles. Nor for oncoming, slow or stationary vehi- cles and objects.

Do not use the adaptive cruise control, for example, in city traffic, in dense traffic, at junctions, on slippery surfaces, with a lot of water or slush on the road, in heavy rain/ snow, in poor visibility, on winding roads or on slip roads.

The distance to the vehicle ahead is mainly measured by a radar sensor. Cruise control regulates the speed with acceleration and braking. It is normal for the brakes to emit a low sound when they are being used by the Adap- tive cruise control.

WARNING

The brake pedal moves when the cruise control brakes. Do not rest your foot under the brake pedal as it could become trapped.

The adaptive cruise control aims to follow the vehicle ahead in the same lane at a time interval set by the driver. If the radar sensor cannot see any vehicle in front then the car will instead maintain the cruise control's set speed. This also happens if the speed of the vehicle in front exceeds the cruise control's set speed.

The adaptive cruise control aims to control the speed in a smooth way. In situations that demand sudden braking the driver must brake himself/herself. This applies with large differ- ences in speed, or if the vehicle in front brakes heavily. Due to limitations in the radar sensor, braking may come unexpectedly or not at all, see page 158.

The adaptive cruise control can be activated to follow another vehicle at speeds from 30 km/h2 up to 200 km/h. If the speed falls below 30 km/h or if the engine speed becomes too low, the cruise control is set in standby mode at which automatic braking ceases - the driver must then take over himself/herself to maintain a safe distance to the vehicle ahead.

Warning lamp - braking by driver

required

Adaptive cruise control has a braking capacity that is equivalent to more than 40% of the car's braking capacity.

If the car needs to be braked more heavily than cruise control capacity and the driver does not brake, then the cruise control uses the collision warning system's warning lamp and warning sound (see page 170) to alert the driver that immediate intervention is required.

NOTE

The warning lamp may be difficult to notice in strong sunlight or when sunglasses are being worn.

WARNING

Cruise control only warns of vehicles detected by the radar sensor. Consequently there may be no warning or it may be sub- ject to a delay. Do not wait for a warning but brake when it is necessary.

Steep roads and/or heavy load

Bear in mind that the adaptive cruise control is primarily intended for use when driving on level road surfaces. It may have difficultly in keeping the correct distance from the vehicle ahead when driving on steep roads, with a heavy load or with a trailer - in which case, be extra atten- tive and ready to slow down.

2 Queue Assistant (in cars with automatic gearbox) can operate in the range of 0-200 km/h, see page 156.

04 Driver support

Adaptive cruise control*

04

154 * Option/accessory, for more information, see Introduction.

Operation

Steering wheel keypad and display.

Standby mode ceases and the stored speed is resumed.

Cruise control - On/Off or Standby mode.

Time interval - Increase/decrease.

Activate and adjust the speed.

Selected speed (in brackets = Standby mode).

Time interval3 - On (during adjustment).

Time interval - On (after adjustment).

Activating and setting the speed

To set the Cruise control:

Press the steering wheel button - the symbol illuminates in the display. The display's symbol (---) shows that the cruise control is set in standby mode.

To activate the Cruise control:

At the desired speed - press the steering wheel button or .

> The current speed is stored in the memory - the display's symbol (---) changes to show the selected speed, e.g. 100, without brackets.

When the symbol changes to the radar sensor has detected a vehicle.

Only when the symbol (with car) is illuminated, is the distance to the vehicle in

front regulated by the cruise control.

Changing the speed

To change the stored speed:

Adjust with short presses on or - every press gives +/- 5 km/h. The last presses made are stored in the memory.

If speed is increased using the accelerator pedal prior to pressing the / button, then it is the car's current speed when the button is pressed that is stored in the cruise control.

In active mode the button has the same function as but results in a lower increase in speed: + 1 km/h.

NOTE

If any of the Cruise Control buttons are held down for more than approx. 1 minute, it is blocked and disabled. To be able to reacti- vate Cruise Control, the car must be stop- ped and the engine restarted.

In certain situations, cruise control cannot be activated. Then the display shows Cruise control Unavailable, see page 160.

3 The display shows either "dash" symbol [6] or [7] - they are never shown simultaneously.

04 Driver support

Adaptive cruise control*

04

* Option/accessory, for more information, see Introduction. 155

Set time interval

Different time intervals to the vehicle in front can be selected and shown in the display as 1-5 horizontal lines - the more lines the longer the time interval. One line corre- sponds to approx. 1 second

to the vehicle in front, 5 lines approx. 3 seconds.

To set/change the time interval:

Increase or decrease with the steering wheel buttons / .

At low speed, when the distances are short, the adaptive cruise control increases the time interval slightly.

The adaptive cruise control allows the time interval to vary noticeably in certain situations in order to allow the car to follow the vehicle in front smoothly and comfortably.

Note that small intervals only allow the driver a short time to react and take action if any unforeseen traffic problem should arise.

The number of lines for the selected time interval is shown during the setting itself and for several seconds after- wards. Then a smaller scale version of the symbol is shown to the right of the dis-

play. The same symbol is also shown when Distance Warning is activated, see page 162.

NOTE

Only use the time intervals permitted by local traffic regulations.

If Cruise Control does not appear to react when activated, this may be because the time distance to the car in front is preventing an increase in speed.

The higher the speed the longer the calcu- lated distance in metres for a given time interval.

Temporary deactivation - standby mode

To temporarily disengage Cruise control and set it in standby mode:

Press the steering wheel button .

> Set speed is shown in brackets in the dis- play, e.g. (100)

Standby mode due to driver intervention

Cruise control is temporarily disengaged and set in standby mode if:

the foot brake is used

the clutch pedal is depressed for longer than 1 minute4

the gear selector is moved to N position (automatic gearbox)

the driver maintains a speed higher than the set speed for longer than 1 minute.

The driver must then regulate the speed.

A temporary increase in speed with the accel- erator pedal, e.g. during overtaking, does not affect the cruise control setting - the car returns to the last stored speed when the accelerator pedal is released.

Automatic standby mode

The Adaptive cruise control is dependent on other systems, e.g.. DSTC (see page 146). If any of these systems stop working then cruise control is automatically deactivated.

In the event of automatic deactivation a signal will sound and the message Cruise control

Cancelled is shown in the display. The driver must then intervene and adapt the speed and distance to the vehicle ahead.

4 Disengaging and selecting a higher or lower gear does not involve standby mode.

04 Driver support

Adaptive cruise control*

04

156 * Option/accessory, for more information, see Introduction.

An automatic deactivation can be due to:

engine speed is too low/high

speed falls below 30 km/h5

wheels lose traction

brake temperature is high

the radar sensor is covered e.g. by wet snow or heavy rain (radar waves blocked).

Resume set speed

Cruise control in standby mode is re-activated with one press on the steering wheel button

- the speed is then set to the last stored speed.

NOTE

A significant increase in speed may arise after the speed has been resumed with .

Overtaking another vehicle

When the car is following another vehicle and the driver indicates an imminent overtake with the direction indicator6, the Cruise control helps to briefly accelerate the car towards the vehicle in front.

The function is active at speeds above 70 km/h.

WARNING

Be aware that this function can be activated in more situations other than during over- taking, e.g. when a direction indicator is used to indicate a change of lane or exit to another road - the car will then accelerate briefly.

Deactivate

Adaptive cruise control is deactivated with a short press on the steering wheel button in standby mode - or with one long press in active mode. The set speed is cleared and cannot be resumed with the button.

Queue Assistant

In cars with automatic gearbox Adaptive cruise control is supplemented with the Queue Assis- tant function (also referred to as "Queue Assist").

Queue Assistant has the following functions:

Extended speed range - also below 30 km/ h and at standstill

Change of target

Automatic braking ceases when stationary

Automatic activation parking brake.

Note that the lowest programmable speed for the cruise control is 30 km/h - even though the cruise control is capable of following another vehicle down to a standstill, a lower speed cannot be selected.

Extended speed range

NOTE

In order to activate the cruise control the driver's door must be closed and the driver must be wearing the seatbelt.

With automatic gearbox the cruise control can follow another vehicle within the range of 0-200 km/h.

NOTE

Activation of the cruise control below 30 km/h requires a vehicle in front within a reasonable distance.

For shorter stops in connection with inching in slow traffic or at traffic lights driving is auto- matically resumed if the stops do not exceed about 3 seconds - if it takes longer before the car in front starts moving again then the cruise control is set in standby mode with automatic

5 Does not apply to a car with Queue Assistant - it manages right down to stationary. 6 On left flash only in left-hand drive car, or right flash in right-hand drive car.

04 Driver support

Adaptive cruise control*

04

* Option/accessory, for more information, see Introduction. 157

braking. The driver must then re-activate the cruise control in one of the following ways:

Press the steering wheel button .

or

Depress the accelerator pedal.

> The cruise control will then resume follow- ing the vehicle in front.

NOTE

Queue Assist can hold the car stationary for a maximum of 4 minutes - then the parking brake is applied and Cruise Control is dis- engaged.

The driver has to release the parking brake before the cruise control can be reactivated.

Change of target

If the target vehicle in front suddenly turns then there may be stationary traffic in front.

When the cruise control is following another vehicle at speeds below 30 km/h and changes target from a moving to a stationary vehicle, the cruise control will slow down for the stationary vehicle.

WARNING

When the cruise control is following another vehicle at speeds in excess of 30 km/h and the target is changed from a moving vehicle to a stationary vehicle, the cruise control will ignore the stationary vehicle and instead select the stored speed.

The driver must intervene him/herself and brake.

Automatic standby mode with change of

target

Cruise control is disengaged and set in standby mode:

when the speed is below 5 km/h and cruise control is not sure whether the target object is a stationary vehicle or some other object, e.g. a speed bump.

when the speed is below 5 km/h and the vehicle in front turns off so the cruise con- trol no longer has a vehicle to follow.

Termination of automatic braking at a

standstill

In certain situations Queue Assist automati- cally interrupts braking when stationary. This means that the brakes are released and the car may start to roll - the driver must therefore intervene and brake the car himself/herself in order to maintain its position.

Queue Assist releases the foot brake and sets cruise control in standby mode in the following situations:

the driver puts his/her foot on the brake pedal

the parking brake is applied

the gear selector is moved to P, N or R position

the driver sets the cruise control in standby mode.

04 Driver support

Adaptive cruise control*

04

158 * Option/accessory, for more information, see Introduction.

Automatic activation parking brake

In some situations Queue Assist applies the parking brake in order to keep the car station- ary.

This takes place if:

the driver opens the door or takes off his/ her seatbelt

DSTC is changed from Normal to Sport

mode

Queue Assist has held the car stationary for more than 4 minutes

the engine is switched off

the brakes have overheated.

The radar sensor and its limitations

The radar sensor is used - apart from by Adap- tive cruise control - by the following functions as well:

Collision Warning with Auto Brake, see page 170

Distance Warning, see page 162.

The function of the radar sensor is to detect cars or larger vehicles in the same direction, in the same lane.

Modification of the radar sensor could result in it being illegal to use.

WARNING

The driver must always be observant with regard to the traffic conditions and intervene when the adaptive cruise control is not maintaining a suitable speed or suitable dis- tance.

The adaptive cruise control cannot handle all traffic, weather and road conditions.

Read the whole of this section for informa- tion on the limitations of the adaptive cruise control. The driver must be familiar with this information before using the adaptive cruise control.

The driver always bears responsibility for maintaining the correct distance and speed, even when the adaptive cruise control is being used.

WARNING

Accessories or other objects such as auxil- iary lamps must not be installed in front of the grille.

WARNING

Adaptive cruise control is not a collision avoidance system. The driver must inter- vene if the system does not detect a vehicle in front.

The adaptive cruise control does not brake for humans or animals, and not for small vehicles such as bicycles and motorcycles. Nor for oncoming, slow or stationary vehi- cles and objects.

Do not use the adaptive cruise control, for example, in city traffic, in dense traffic, at junctions, on slippery surfaces, with a lot of water or slush on the road, in heavy rain/ snow, in poor visibility, on winding roads or on slip roads.

The capacity of the radar sensor to detect vehi- cles in front is reduced significantly:

if the radar sensor becomes blocked and cannot detect other vehicles e.g. in heavy rain or slush, or if other objects have col- lected in front of the radar sensor.

NOTE

Keep the area in front of the radar sensor clean - see "Maintenance" on page 173.

if the speed of vehicles in front is signifi- cantly different from your own speed.

04 Driver support

Adaptive cruise control*

04

* Option/accessory, for more information, see Introduction. 159

Examples where the cruise control does

not work optimally

The radar sensor has a limited field of vision. In some situations another vehicle is not detected, or the detection is made later than expected.

ACC field of vision.

Sometimes the radar sensor is late at detecting vehicles at close distances, e.g. a vehicle that drives in between the car and vehicles in front.

Small vehicles, such as motorcycles, or vehicles not driving in the centre of the lane can remain undetected.

In bends the radar sensor may detect the wrong vehicle or lose a detected vehicle from view.

Fault tracing and action

If the display shows the message Radar

blocked See manual this means that the radar signals from the radar sensor are blocked and that vehicles in front of the car could not be detected.

This means that in addition to the Adaptive Cruise Control, Distance Warning and Collision Warning with Auto Brake functions are not operating either.

The following table presents possible causes for a message being shown along with the appropriate action.

04 Driver support

Adaptive cruise control*

04

160 * Option/accessory, for more information, see Introduction.

Cause Action

The radar surface in the grille is dirty or covered with ice or snow. Clean the radar surface in the grille from dirt, ice and snow.

Heavy rain or snow blocking the radar signals. No action. Sometimes the radar does not work during heavy rain or snowfall.

Water or snow from the road surface swirls up and blocks the radar sig- nals.

No action. Sometimes the radar does not work on a very wet or snowy road surface.

The radar surface has been cleaned but the message remains. Wait. It could take several minutes for the radar to sense that it is no longer blocked.

Symbols and messages in the display

Symbol Message Specification

Standby mode or active mode without detected vehicle.

Active mode with detected vehicle to which cruise control adapts the speed.

Time interval activated, during adjustment.

Time interval activated, after adjustment.

DSTC Normal to enable

Cruise

Adaptive cruise control cannot be activated until the Stability and Traction Control system (DSTC) has been set in Normal mode - see page 146.

Cruise control Cancelled Adaptive cruise control has been deactivated - the driver has to regulate the speed.

04 Driver support

Adaptive cruise control*

04

* Option/accessory, for more information, see Introduction. 161

Symbol Message Specification

Cruise control Unavailable Adaptive cruise control cannot be activated.

This could be due to:

brake temperature is high

the radar sensor is blocked by e.g. wet snow or rain.

Radar blocked See manual Adaptive cruise control temporarily disengaged.

The radar sensor is blocked and cannot detect other vehicles. For example, in the event that heavy rain or if slush has collected in front of the radar sensor.

Read about the limitations of the radar sensor, see page 158.

Cruise control Service

required

Adaptive cruise control disengaged.

Contact a workshop - an authorised Volvo workshop is recommended.

Press Brake To hold + acoustic alarm

(Only with Queue Assistant)

The car is stationary and the cruise control will release the foot brake to allow the parking brake to take over and hold the car, but a fault in the parking brake means the car will shortly begin to roll.

The driver must brake himself/herself. The message remains and the alarm sounds until the driver depresses the brake pedal or uses the accelerator pedal.

Below 30 km/h Only fol-

lowing

(Only with Queue Assistant)

Shown with attempts to activate the cruise control at speeds below 30 km/h without a vehicle in front within the activation distance (approx. 30 metres).

04 Driver support

Distance Warning*

04

162 * Option/accessory, for more information, see Introduction.

General

Distance Warning (Distance Alert) is a function that informs the driver about the time interval to vehicles in front.

Distance Warning is active at speeds above 30 km/h and only reacts to vehicles driving in front of the car, in the same direction. No dis- tance information is provided for oncoming, slow or stationary vehicles.

Orange warning lamp1.

An orange warning lamp in the windscreen illu- minates with a constant glow if the distance to the vehicle in front is shorter than the set time interval.

NOTE

Distance warning is deactivated during the time the adaptive cruise control is active.

WARNING

Distance warning only reacts if the distance to the vehicle ahead is shorter than the pre- set value - the speed of the driver's vehicle is not affected.

Operation

Press the button in the centre console to switch the function on or off. The function is switched on if one lamp is illuminated in the button.

Some combinations of the selected equipment leave no vacant space for a button in the centre console - in which case the function is handled by the car's menu system MY CAR under Settings Car settings Warning

distance. For a description of the menu sys- tem - see page 200.

Set time interval

Controls and display for time interval.

Time interval - Increase/decrease. Press up to increase, down to decrease.

Time interval2 - On (during adjustment).

Time interval2 - On (after adjustment).

1 NOTE: The illustration is schematic - details may vary depending on car model. 2 The display shows either "dash" symbol [2] or [3] - they are never shown simultaneously.

04 Driver support

Distance Warning*

04

* Option/accessory, for more information, see Introduction. 163

Different time intervals to the vehicle in front can be selected and shown in the display as 1-5 horizontal lines - the more lines the longer the time interval. One line corre- sponds to

approximately 1 second to the vehicle in front, 5 lines approximately 3 seconds.

The number of lines for the selected time interval is shown during the setting itself and for several seconds after- wards. Then a smaller scale version of the symbol is shown to the right of the dis-

play. The same symbol is also shown when adaptive cruise control is activated.

NOTE

The higher the speed, the longer the calcu- lated distance in metres for a specific time interval.

The set time interval is also used by the adaptive cruise control function, see page 154.

Only use the time interval that is allowed in accordance with local traffic regulations.

Limitations

The function uses the same radar sensor as adaptive cruise control and the collision warn- ing system. For more information on the radar sensor and its limitations, see page 158.

NOTE

Strong sunlight, reflections or strong varia- tions in light intensity, as well as wearing sunglasses, could mean that the warning light in the windscreen cannot be seen.

Poor weather or winding roads could affect the radar sensor's capacity to detect vehi- cles in front.

The size of other vehicles could also affect detection capacity, e.g. motorcycles. This could mean that the warning lamp illumi- nates at a shorter distance than the setting or that the warning is temporarily absent.

Extremely high speeds can also cause the lamp to illuminate at a shorter distance than that set due to limitations in sensor range.

04 Driver support

Distance Warning*

04

164 * Option/accessory, for more information, see Introduction.

Symbols and messages in the display

Symbol Message Specification

Set time interval, during adjustment.

Set time interval, after adjustment.

Radar blocked See manual Distance Warning temporarily disengaged.

The radar sensor is blocked and cannot detect other vehicles, e.g. in the event of heavy rain or if slush has collected in front of the radar sensor.

Read about the limitations of the radar sensor, see page 158.

Collision warn. Service

required

Distance Warning and Collision Warning with Auto Brake fully or partially disengaged.

Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

04 Driver support

City Safety

04

* Option/accessory, for more information, see Introduction. 165

General

City Safety is a function for helping the driver to avoid a collision when driving in queues, amongst other things, when changes in the traffic ahead, combined with a lapse in atten- tion, could lead to an incident.

The function is active at speeds under50 km/h and it helps the driver by auto- matically braking the car in the event of immi- nent risk of collision with vehicles in front, should the driver not react in time by braking and/or steering away.

City Safety is activated in situations where the driver should have started braking earlier, which is why it cannot help the driver in every situation.

City Safety is designed to be activated as late as possible in order to avoid unnecessary intervention.

City Safety must not be used as an excuse for the driver to change his/her driving style. If the driver solely relies on City Safety to do the braking, there will be a collision sooner or later.

The driver or passengers normally only notice City Safety if a situation arises where the car is extremely close to being in a collision.

If the car is also equipped with a Collision Warning function with Auto Brake*, these two systems complement each other. For more information on Collision Warning function with Auto Brake, see page 170.

IMPORTANT

Maintenance and replacement of City Safety components must only be per- formed by a workshop - an authorised Volvo workshop is recommended.

WARNING

City Safety does not engage in all driving situations or traffic, weather or road condi- tions.

City Safety does not react to vehicles driving in a different direction from the car, to small vehicles, motorcycles and bicycles or to humans and animals.

City Safety can prevent collision at a speed difference of less than 15 km/h - at a higher speed difference, it is only possible to reduce collision speed. In order to obtain full brake function, the driver must depress the brake pedal.

Never wait for City Safety to engage. The driver always bears responsibility for main- taining the proper distance and speed.

Function

Laser sensor transmitter and receiver window1.

City Safety detects the traffic in front of the car with a laser sensor fitted in the top edge of the windscreen. If there is an imminent risk of collision, City Safety will automatically brake the car, which may be experienced as sudden braking.

If the speed difference is 4-15 km/h in relation to the vehicle in front then City Safety can completely prevent a collision.

City Safety activates a short, sharp braking and stops the car in normal circumstances, just behind the vehicle in front. For most drivers this is well outside normal driving style and may be experienced as being uncomfortable.

1 NOTE: The illustration is schematic - details may vary depending on car model.

04 Driver support

City Safety

04

166

If the difference in speed between the vehicles is greater than 15 km/h then City Safety may not prevent the collision on its own. To obtain full brake force, the driver must depress the brake pedal. This could then make it possible to prevent a collision, even at speed differen- ces above 15 km/h.

When the function is activated and brakes, the instrument panel display shows a message to the effect that the function is/has been active.

NOTE

The brake lights come on when City Safety brakes the car.

Operation

NOTE

The City Safety function is always ena- bled after the engine has been started via key position I and II (see page 78 on key positions).

On and Off

In certain situations, it may advisable to disable City Safety, e.g. where leafy branches could sweep over the bonnet and/or windscreen.

After starting the engine City Safety can be deactivated as follows:

Using MY CAR on the centre console dis- play screen with its menu system, search and locate Settings Car settings

Driver support systems City Safety. Select the Off option. For more information on the menu system MY CAR, see page 200.

However, the function will be enabled the next time the engine is started, regardless of whether the system was enabled or dis- abled when the engine was switched off.

WARNING

The laser sensor also transmits laser light when City Safety is disabled manually.

To enable City Safety again:

Follow the same procedure as for disa- bling, but select the On option.

Limitations

The sensor in City Safety is designed to detect cars and other large vehicles in front of the car irrespective of whether it is day or night.

However, the sensor has limitations and has poorer functionality - or none at all - in e.g. heavy snowfall or rain, dense fog, dust storms or snow flurries. Mist, dirt, ice or snow on the windscreen may disrupt the function.

Low-hanging objects, e.g. a flag/pennant for projecting load, or accessories such as auxili- ary lamps and bull bars that are higher than the bonnet limit the function.

The laser light from the sensor in City Safety measures how the light is reflected. The sensor cannot detect objects with low reflection capacity. The rear sections of the vehicle generally reflect the light sufficiently thanks to the number plate and rear light reflec- tors.

On slippery road surfaces the braking distance is extended, which may reduce the capacity of City Safety to avoid a collision. In such sit- uations the ABS and DSTC systems will pro- vide best possible braking force with main- tained stability.

When your own car is reversing, City Safety is temporarily deactivated.

City Safety is not activated at low speeds - under 4 km/h, which is why the system does not intervene in situations where a vehicle in front is being approached very slowly, e.g. when parking.

Driver commands are always prioritised, which is why City Safety does not intervene in sit- uations where the driver is steering or acceler- ating in a clear manner, even if a collision is unavoidable.

04 Driver support

City Safety

04

167

When City Safety has prevented a collision with a stationary object the car remains sta- tionary for a maximum of 1.5 seconds. If the car is braked for a vehicle in front that is moving, then speed is reduced to the same speed as that maintained by the vehicle in front.

On a car with manual gearbox the engine stops when City Safety has stopped the car, unless the driver manages to depress the clutch pedal beforehand.

NOTE

Keep the windscreen surface in front of the laser sensor free from ice, snow and dirt (see the illustration for sensor loca- tion, page 165).

Do not affix or mount anything on the windscreen in front of the laser sensor

Remove ice and snow from the bonnet - snow and ice must not exceed a height of 5 cm.

Fault tracing and action

If the message Windscreen Sensors

blocked is shown on the instrument panel dis- play, it indicates that the laser sensor is blocked and cannot detect vehicles in front of the car. This means that City Safety is not operational.

The Windscreen Sensors blocked message is not shown for all situations in which the laser sensor is blocked. The driver must therefore be diligent about keeping the windscreen and area in front of the laser sensor clean.

The following table presents possible causes for the message being shown, along with sug- gestions for appropriate action.

Cause Action

The windscreen sur- face in front of the laser sensor is dirty or covered with ice or snow.

Clean the wind- screen surface in front of the sensor from dirt, ice and snow.

The laser sensor field of vision is blocked.

Remove the block- ing object.

IMPORTANT

If there are cracks, scratches or stone chips in the windscreen in front of either of the laser sensor's "windows" and they cover a surface of approx. 0.5 x 3.0 mm (or larger), then a workshop must be contacted for repair or replacement of the windscreen (see the illustration for sensor location, page 165) - an authorised Volvo workshop is rec- ommended.

Failure to take action may result in reduced performance for City Safety.

To avoid the risk of reducing City Safety performance the following also applies:

Before replacing a windscreen, contact an authorised Volvo workshop to verify that the correct windscreen is ordered and fitted. Using the wrong windscreen may result in the City Safety function failing to operate or operating incor- rectly.

The same type or Volvo-approved windscreen wipers must be fitted during replacement.

04 Driver support

City Safety

04

168

Laser sensor

The City Safety function includes a sensor which transmits laser light. Contact a qualified workshop in the event of a fault or if the laser sensor needs servicing - an authorised Volvo workshop is recommended.

WARNING

Never look into the laser sensor (which emits spreading invisible laser radiation) at a distance of 100 mm or closer with magni- fying optics such as a magnifying glass, microscope, lens or similar optical instru- ments - this would involve a risk of eye injury (the illustration on page 165 shows sensor location).

For more information on the laser sensor, see page 9.

Symbols and messages in the display

In conjunction with automatic braking by the City Safety system, one or more symbols may illuminate on the instrument panel and a message may appear on its display.

A text message can be acknowledged by briefly pressing the OK button on the direction indicator stalk.

04 Driver support

City Safety

04

169

Symbol Message Meaning/Action

Auto braking by City Safety City Safety is braking or has automatically braked.

Windscreen Sensors

blocked

The laser sensor is temporarily non-operational because something is blocking it.

Remove the object blocking the sensor and/or clean the windscreen in front of the sensor.

Read about the limitations of the laser sensor, see page 166.

City Safety Service

required

City Safety is not operational.

Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

170 * Option/accessory, for more information, see Introduction.

General

"Collision Warning with Auto Brake & Pedes- trian Detection" is an aid to assist the driver when there is a risk of colliding with a pedes- trian or vehicle in front that is stationary or moving in the same direction.

Collision Warning with Auto Brake & Pedestrian Detection is activated in situations where the driver should have started braking earlier, which is why it cannot help the driver in every situation.

Collision Warning with Auto Brake & Pedestrian Detection is designed to be activated as late as possible in order to avoid unnecessary inter- vention.

Collision Warning with Auto Brake & Pedestrian Detection may prevent a collision or reduce the collision speed.

Collision Warning with Auto Brake & Pedestrian Detection must not be used as an excuse for the driver to change his/her driving style. If the driver solely relies on Collision Warning with Auto Brake to do the braking, there will be a collision sooner or later.

Two system levels

Depending on how the car equipped, the Col- lision Warning with Auto Brake & Pedestrian Detection function may appear in two variants: Level 1 and Level 2.

Level 1

The driver is merely warned of occurring obsta- cles by means of visual and acoustic signals - no automatic braking intervenes, the driver must himself brake.

Level 2

The driver is warned of occurring obstacles by means of visual and acoustic signals - the car is braked automatically if the driver himself does not act within a reasonable time.

IMPORTANT

Maintenance of components included in Collision Warning with Auto Brake & Pedes- trian Detection must only be carried out in a workshop - an authorised Volvo workshop is recommended.

Function

Function overview1.

Audio-visual warning signal in the event of a collision risk.

Radar sensor2

Camera sensor

Collision Warning with Auto Brake executes three steps in the following order:

1. Collision warning

2. Brake support2

3. Auto Brake2

1 NOTE: The illustration is schematic - details may vary depending on car model. 2 With system Level 2 only.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

* Option/accessory, for more information, see Introduction. 171

The collision warning system and City Safety complement each other. For more information on City Safety, see page 165.

1 - Collision warning

The driver is first warned of a potentially immi- nent collision.

The collision warning system detects pedes- trians, stationary vehicles as well as vehicles driving in the same direction in front of the car.

If there is a risk of collision with a pedestrian or a vehicle, the driver's attention is attracted with a flashing red warning signal (no. [1] in the illus- tration on page 170) and an acoustic signal.

2 - Brake support2

If the risk of collision has increased further after the collision warning then the brake support is activated.

This means that the brake system is prepared for rapid braking by applying the brakes lightly, which may feel like a slight jolt.

If the brake pedal is depressed sufficiently quickly then full brake function is implemented.

Brake support also reinforces the driver's brak- ing if the system considers that the braking is not sufficient to avoid a collision.

3 - Auto Brake2

The automatic brake function is activated last.

If in this situation the driver has not yet started to take evasive action and the risk of collision is imminent then the automatic braking func- tion is deployed - this takes place irrespective of whether or not the driver brakes. Braking then takes place with full brake force in order to reduce collision speed, or with limited brake force if it is sufficient to avoid a collision.

WARNING

The collision warning system does not engage in all driving situations or traffic, weather or road conditions. The collision warning system does not react to vehicles driving in another direction to the car or to animals.

Warning only activated in the event of a high risk for collision. This section "Function" and the section "Limitations" inform about limitations that the driver must be aware of before using the Collision Warning system with Auto Brake.

Warnings and brake interventions for pedestrians are switched off at vehicle speeds exceeding 80 km/h.

Warnings and brake interventions for pedestrians do not work in darkness and tunnels - not even when streetlights are lit.

The auto-brake function can prevent a col- lision or reduce collision speed. To ensure full brake performance, the driver should always depress the brake pedal - even when the car auto-brakes.

Never wait for a collision warning. The driver is always responsible that the correct dis- tance and speed are maintained - even when the collision warning system with auto-brake is used.

2 With system Level 2 only.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

172 * Option/accessory, for more information, see Introduction.

Detection of pedestrians

Optimal examples of what the system regards as pedestrians with clear body contours.

Optimal performance of the system requires that the system function that detects pedes- trians receives as unambiguous information as possible about the contours of the body - this implies the opportunity to identify the head, arms, shoulders, legs, upper and lower body combined with a normal human pattern of movement.

If large parts of the body are not visible to the camera then the system cannot detect a pedestrian.

In order for a pedestrian to be detected he/ she must appear full-length and have a height of at least 80 cm.

The system cannot detect a pedestrian carrying larger items.

The camera sensor's ability to see pedes- trians at dusk and dawn is limited - just like the human eye.

The camera sensor's capacity to detect pedestrians is deactivated when driving in darkness and tunnels - even when street- lights are lit.

WARNING

Collision Warning with Auto Brake & Pedes- trian Detection is an assistance tool.

This function cannot detect all pedestrians in all situations and it cannot see e.g. parti- ally obscured pedestrians, people in cloth- ing that hides the contours of the body or pedestrians shorter than 80 cm.

The driver is always responsible that the vehicle is driven properly and with a safety distance adapted to the speed.

Operation

Settings are made from MY CAR via the centre console display screen and menu system. For information on how the menu system is used, see page 200.

NOTE

The Brake Support and Auto Brake func- tions are always enabled - they cannot be deactivated.

On and Off

To select whether the collision warning system should be switched on or off:

Use the menu system MY CAR via the centre console display to search for Settings Car settings Driver

support systems Collision Warning - there, select On or Off.

An activated function is tested every time the engine is started by briefly illuminating the sep- arate lights for the warning lamp (no. [1] in the illustration on page 170).

When starting the engine, the setting that was selected when the engine was switched off is obtained automatically.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

* Option/accessory, for more information, see Introduction. 173

Activating/deactivating warning signals

The warning lamp (no. [1] in the illustration on page 170) is activated automatically when the engine is started if Collision Warning is ena- bled.

The warning sound can be activated/deacti- vated separately:

Select On or Off in the menu system MY

CAR under Settings Car settings

Driver support systems Collision

Warning Warning sound.

Set warning distance

The warning distance regulates the distance at which the visual and acoustic warnings are deployed.

Select one of the options from Long, Normal or Short in the menu system MY

CAR under Settings Car settings

Driver support systems Collision

Warning Warning distance.

The warning distance determines the system's sensitivity. Warning distance Long provides an earlier warning. First test with Long and if this setting produces too many warnings, which could be perceived as irritating in certain sit-

uations, then change to warning distance Normal.

Only use warning distance Short in excep- tional cases, e.g. for dynamic driving.

NOTE

When the adaptive cruise control is in use the warning lamp and warning sound will be used by the cruise control even if the colli- sion warning system is switched off.

The collision warning system warns the driver in the event of a risk of a collision, but the function cannot shorten driver reaction time.

In order for the collision warning system to be effective, always drive with the Distance Alert set at time interval 4 5. see page 162.

NOTE

Even if the warning distance has been set to Long warnings could be perceived as being late in certain situations, e.g. when there are large differences in speed or if vehicles in front brake heavily.

WARNING

No automatic system can guarantee 100 % correct function in all situations. Therefore, never test the Auto Brake system by driving at people or vehicles - this may cause severe damage and injury and risk lives.

Checking settings

The settings required can be controlled on the centre console display screen. Search with the menu system MY CAR under Settings Car

settings Driver support systems

Collision Warning, see page 200.

Maintenance

Camera and radar sensor3.

3 NOTE: The illustration is schematic - details may vary depending on car model.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

174 * Option/accessory, for more information, see Introduction.

For the sensors to work correctly, they must be kept clear of dirt, ice and snow, and be cleaned regularly with water and car shampoo.

NOTE

Dirt, ice and snow covering the sensors will reduce their function and may prevent measurement.

Limitations

Collision Warning with Auto Brake and Pedes- trian Detection is active from approx. 4 km/h.

The visual warning signal (no. [1] in the illustra- tion on page 170) may be difficult to notice in the event of strong sunlight, reflections, when sunglasses are being worn or if the driver is not looking straight ahead. The warning sound should therefore always be activated.

On slippery road surfaces the braking distance is extended, which may reduce the capacity to avoid a collision. In such situations the ABS and DSTC systems will provide best possible braking force with maintained stability.

NOTE

The visual warning signal can be temporarily disengaged in the event of high passenger compartment temperature caused by strong sunlight for example. If this occurs then the warning sound is activated even if it is deactivated in the menu system.

Warnings may not appear if the dis- tance to the vehicle in front is small or if steering wheel and pedal movements are large, e.g. a very active driving style.

WARNING

Warnings and brake interventions could be implemented late or not at all if the traffic situation or external influences mean that the radar or camera sensor cannot detect a pedestrian or a vehicle in front correctly.

The sensor system has a limited range for pedestrians and the system therefore pro- vides effective warnings and brake inter- ventions at vehicle speeds up to 50 km/h. For stationary or slow-moving vehicles, warnings and brake interventions are effec- tive at vehicle speeds up to 70 km/h.

Warnings for stationary or slow-moving vehicles could be disengaged due to dark- ness or poor visibility.

Warnings and brake interventions for pedestrians are switched off at vehicle speeds exceeding 80 km/h.

The collision warning system uses the same radar sensors as adaptive cruise control. For more information on the radar sensor and its limitations, see page 175.

If warnings are perceived as being too frequent or disturbing then the warning distance can be reduced. This then leads to the system provid- ing a warning at a later stage, which reduces the total number of warnings; see the section "Set warning distance" on page 173.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

* Option/accessory, for more information, see Introduction. 175

Collision Warning with Auto Brake is tempo- rarily deactivated with reverse gear engaged.

Collision Warning with Auto Brake is not acti- vated at low speeds - under 4 km/h, which is why the system does not intervene in situations where the car is approaching a vehicle in front very slowly, e.g. when parking.

In situations where the driver demonstrates active, aware driving behaviour, a collision warning may be postponed slightly in order to keep unnecessary warnings to a minimum.

When Auto Brake has prevented a collision with a stationary object the car remains sta- tionary for a maximum of 1.5 seconds. If the car is braked for a vehicle in front that is moving, then speed is reduced to the same speed as that maintained by the vehicle in front.

On a car with manual gearbox the engine stops when Auto Brake has stopped the car, unless the driver manages to depress the clutch pedal beforehand.

Camera sensor limitations

The cars camera sensor is also used - as well as by Collision Warning with Auto Brake - by the functions:

Automatic main/dipped beam dimming - see page 88

Road sign information - see page 148

Driver Alert Control see page 179

Lane Departure Warning see page 182.

NOTE

Keep the windscreen surface in front of the camera sensor clean from ice, snow, mist and dirt.

Do not attach or fit anything to the wind- screen in front of the camera sensor, as this could reduce or prevent the function of one or more camera-dependent systems.

The camera sensors have limitations similar to the human eye, i.e. they "see" worse in dark- ness, heavy snowfall or rain and in thick fog for example. Under such conditions the functions of camera-dependent systems could be sig- nificantly reduced or temporarily disengaged.

Strong oncoming light, reflections in the car- riageway, snow or ice on the road surface, dirty road surfaces or unclear lane markings could also significantly reduce camera sensor func- tion when it is used to scan the carriageway and detect pedestrians and other vehicles.

The field of vision of the camera sensor is lim- ited, which is why pedestrians and vehicles cannot be detected in some situations, or they are detected later than anticipated.

During very high temperatures the camera is temporarily switched off for about 15 minutes

after the engine is started in order to protect camera functionality.

Fault tracing and action

If the display shows the message Windscreen

Sensors blocked then this means that the camera sensor is blocked and cannot detect pedestrians, vehicles or road markings in front of the car.

At the same time, this means that - besides Collision Warning with Auto Brake - the Auto- matic main/dipped beam dimming, Road sign information, Driver Alert Control and Lane Departure Warning functions will not have full functionality either.

The following table presents possible causes for a message being shown along with the appropriate action.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

176 * Option/accessory, for more information, see Introduction.

Cause Action

The windscreen sur- face in front of the camera is dirty or covered with ice or snow.

Clean the wind- screen surface in front of the camera from dirt, ice and snow.

Thick fog, heavy rain or snow means that the camera does not work sufficiently well.

No action. At times the camera does not work during heavy rain or snowfall.

Cause Action

The windscreen sur- face in front of the camera has been cleaned but the message remains.

Wait. It may take several minutes for the camera to meas- ure the visibility.

Cause Action

Dirt has appeared between the inside of the windscreen and the camera.

Visit a workshop to have the windscreen inside the camera cover cleaned - an authorised Volvo workshop is recom- mended.

Symbols and messages in the display

Symbol Message Specification

Collis'n

warning

OFF

Collision warning system switched off.

Shown when the engine is started.

The message clears after about 5 seconds or after one press of the OK button.

Collision

warn.

Unavaila-

ble

The collision warning system cannot be activated.

Shown when the driver attempts to activate the function.

The message clears after about 5 seconds or after one press of the OK button.

Auto brak-

ing was

activated

Auto Brake has been active.

The message clears after one press of the OK button.

04 Driver support

Collision Warning with Auto Brake & Pedestrian Protection*

04

* Option/accessory, for more information, see Introduction. 177

Symbol Message Specification

Wind-

screen

Sensors

blocked

The camera sensor is temporarily disengaged.

Shown in the event of snow, ice or dirt on the windscreen for example.

Clean the windscreen surface in front of the camera sensor.

Read about the limitations of the camera sensor, see page 175.

Radar

blocked

See man-

ual

Collision Warning with Auto Brake is temporarily disengaged.

The radar sensor is blocked and cannot detect other vehicles. For example, in the event of heavy rain or if slush has collected in front of the radar sensor.

Read about the limitations of the radar sensor, see page 158.

Collision

warn.

Service

required

Collision Warning with Auto Brake is fully or partially disengaged.

Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

04 Driver support

Driver Alert System*

04

178 * Option/accessory, for more information, see Introduction.

General information on Driver Alert System

The Driver Alert System is intended to assist drivers whose driving ability is deteriorating or who are inadvertently leaving the lane they are driving on.

The Driver Alert System consists of different functions which can either be switched on at the same time or individually:

Driver Alert Control DAC, see page 179.

Lane Departure Warning LDW, see page 182.

A switched-on function is set in standby mode and is not activated automatically until speed exceeds 65 km/h.

The function is deactivated again when speed decreases to below 60 km/h.

Both functions use a camera which is depend- ent on the lane having side markings painted on each side.

WARNING

The Driver Alert System does not work in all situations but is instead only intended to be of supplementary assistance.

The driver always has ultimate responsibility that the car is driven safely.

04 Driver support

Driver Alert System - DAC*

04

* Option/accessory, for more information, see Introduction. 179

General information on DAC

The DAC (Driver Alert Control) function is intended to attract the driver's attention when he/she starts to drive less consistently, e.g. if he/she becomes distracted or starts to fall asleep.

A camera detects the side markings painted on the carriageway and compares the section of the road with the driver's steering wheel move- ments. The driver is alerted if the vehicle does not follow the carriageway evenly.

NOTE

The camera sensor has certain limitations, see page 175.

The objective for DAC is to detect slowly dete- riorating driving ability and it is primarily intended for major roads. The function is not intended for city traffic.

In some cases driving ability is not affected despite driver fatigue. In which case there may not be any warning issued for the driver. For this reason it is always important to stop and take a break in the event of any signs of driver fatigue, irrespective of whether or not DAC issues a warning.

NOTE

The function must not be used to extend a driving stint. Always plan breaks at regular intervals and ensure that you are fully rested.

Limitation

In some cases the system may issue a warning despite driving ability not deteriorating, for example:

if the driver tests the LDW function.

in strong side winds.

on rutted road surfaces.

Operation

Some settings are made from the centre con- sole display screen and its menu system. For information on how the menu system is used, see page 200.

The current status of Driver Alert can be checked on the trip computer display with the thumbwheel on the left-hand stalk switch.

Thumbwheel. Turn until the display shows Driver

Alert . On the second row the options Driver Alert Standby <65 km/h, Driver

Alert

Unavailable or level mark can be shown.

OK confirms or clears a warning in the memory.

04 Driver support

Driver Alert System - DAC*

04

180 * Option/accessory, for more information, see Introduction.

On/Off

To set Driver Alert in standby mode:

Search on the centre console's display screen with its MY CAR menu system and locate Car settings Driver support

systems Driver Alert and tick the box.

No tick in the box: Function disengaged.

Function

Driver Alert is activated when speed exceeds 65 km/h and remains active as long as the speed is over 60 km/h.

The display shows a level mark with 1-5 bars, where a low number of bars indicates incon- sistent driving style. Many bars indicates stable driving.

If the vehicle is driven inconsistently then the driver is alerted by an acoustic signal as well as the text message Driver Alert Time for a

break. The warning is repeated after a time if driving ability does not improve.

WARNING

An alarm should be taken very seriously, as a sleepy driver is often not aware of his/her own condition.

In the event of an alarm or a feeling of tired- ness; stop the car in a safe manner as soon as possible and rest.

Studies have shown that it is equally as dan- gerous to drive while tired as it is under the influence of alcohol.

Symbols and messages in the display

Symbol Message Specification

Driver Alert OFF The function is disengaged.

Driver Alert Standby <65

km/h

The function is set in standby mode due to speed being lower than 65 km/h.

Driver Alert Unavailable The carriageway does not have clear side markings or the camera sensor is temporarily disengaged. Read about the limitations of the camera sensor, see page 175.

Driver Alert The function analyses the driver's driving style.

The number of bars can vary in the range 1-5, where a low number of bars indicates inconsistent driving ability. A high number of bars indicates stable driving.

04 Driver support

Driver Alert System - DAC*

04

* Option/accessory, for more information, see Introduction. 181

Symbol Message Specification

Driver Alert Time for a

break

The vehicle has been driven inconsistently - the driver is alerted by an acoustic warning signal + text.

Windscreen Sensors

blocked

The camera sensor is temporarily disengaged.

Shown in the event of snow, ice or dirt on the windscreen for example.

Clean the windscreen surface in front of the camera sensor.

Read about the limitations of the camera sensor, see page 175.

Driver Alert Sys Service

required

The system is disengaged.

Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

04 Driver support

Driver Alert System - LDW*

04

182 * Option/accessory, for more information, see Introduction.

General information on - LDW

The LDW (Lane Departure Warning) function is intended to reduce the risk of so-called single- vehicle accidents accidents where, in certain situations, the vehicle leaves the carriageway and is in danger of driving either into a ditch or into oncoming traffic.

LDW consists of a camera that detects the side markings painted on the carriageway. The driver is alerted by an acoustic signal if the vehicle crosses a side marking.

Operation and function

The function is switched on or off by means of a switch on the centre console. An indicator lamp in the button illuminates when the func- tion is switched on.

The trip computer display shows Lane Depart

Warn Standby <65 km/h when the function is in standby mode due to speed being below 65 km/h.

The LDW function is activated automatically from standby mode after the camera has scan- ned in the carriageway's side markings and speed exceeds 65 km/h. The trip computer display then shows Lane Depart Warn

Available.

If the camera can no longer detect the carria- geway's side markings the display shows Lane Depart Warn Unavailable.

If speed decreases to below 60 km/h then the function resumes standby mode and the dis- play shows Lane Depart Warn Standby <65

km/h.

If the vehicle crosses the left or right-hand side marking of the carriageway without due cause then the driver is alerted by an acoustic signal.

No warning is given in the following situations:

Direction indicators activated

The driver has his/her foot on the brake pedal1

In the event of the accelerator pedal being depressed rapidly1

In the event of rapid steering wheel move- ments1

In the event of a sudden turn so that the car rolls.

The camera sensor also has certain limitations. For more information, see page 175.

1 A warning is still given when Increased sensitivity is selected, see page 184.

04 Driver support

Driver Alert System - LDW*

04

* Option/accessory, for more information, see Introduction. 183

NOTE

The driver is only warned once each time the wheels cross a line. So there is no acoustic alarm when there is a line between the car's wheels.

Symbols and messages in the display

Symbol Message Specification

Lane departure warning

ON/Lane departure warn-

ing OFF

The function is switched on/off.

Shown at switch-on/off.

The text disappears after 5 seconds.

Lane Depart Warn Standby

<65 km/h

The function is set in standby mode due to speed being lower than 65 km/h.

Lane Depart Warn Unavail-

able

The carriageway does not have clear side markings or the camera sensor is temporarily disengaged. Read about the limitations of the camera sensor, see page 175.

Lane Depart Warn Availa-

ble

The function scans the carriageway's side markings.

04 Driver support

Driver Alert System - LDW*

04

184 * Option/accessory, for more information, see Introduction.

Symbol Message Specification

Windscreen Sensors

blocked

The camera sensor is temporarily disengaged.

Shown in the event of snow, ice or dirt on the windscreen for example.

Clean the windscreen surface in front of the camera sensor.

Read about the limitations of the camera sensor, see page 175.

Driver Alert Sys Service

required

The system is disengaged.

Visit a workshop if the message remains - an authorised Volvo workshop is recommended.

Personal preferences

Settings are made from the centre console's display screen via the menu system in MY

CAR. From there, search and locate Settings

Car settings Driver support systems

Lane Departure Warning. For information on how the menu system is used - see page 200.

Select from the options:

On at start-up - The function enters standby mode every time the engine is

started. Otherwise the same value as when the engine was switched off is obtained.

Increased sensitivity - The sensitivity increases, an alarm is triggered earlier and fewer limitations apply.

04 Driver support

Park assist syst*

04

* Option/accessory, for more information, see Introduction. 185

General

Parking assistance is used as an aid to parking. An acoustic signal as well as symbols on the centre console's display screen indicate the distance to the detected obstacle.

Parking assistance sound level can be adjusted during the ongoing acoustic signal using the centre console's VOL knob or in the car's menu system MY CAR - see page 200.

Parking assistance is available in two variants:

Rear only

Both front and rear.

NOTE

When a towbar is configured with the car's electrical system, the protrusion of the tow- bar is included when the function measures the parking space.

WARNING

Parking assistance does not relinquish the driver's own responsibility during parking.

The sensors have blind spots where obstacles cannot be detected.

Be aware of e.g. people or animals near the car.

Function

The system is automatically activated when the engine is started - the switch's On/Off lamp is illuminated. If parking assistance is switched off with the button, the lamp goes out.

Display screen view - showing an obstacle left front and right rear.

The centre console's display screen shows an overview of the relationship between the car and detected obstacle.

Marked sectors show which of the four sen- sor(s) detected an obstacle. The closer to the car symbol a selected sector box is, the shorter the distance between the car and a detected obstacle.

The frequency of the signal increases the shorter the distance to an obstacle, in front of or behind the car. Other sound from the audio system is muted automatically.

When the distance is within 30 cm the tone is constant and the active sensor's field nearest the car is filled in. If the detected obstacle is within the distance for the constant tone both

04 Driver support

Park assist syst*

04

186 * Option/accessory, for more information, see Introduction.

behind and in front of the car, then the tone sounds alternately from the loudspeakers.

IMPORTANT

Certain objects e.g. chains, thin glossy poles or low barriers may be in the "signal shadow" and are then temporarily not detected by the sensors - the pulsating tone may then unexpectedly stop instead of changing over to the expected constant tone.

In which case, pay extra attention and manoeuvre/reposition the car particu- larly slowly or stop the current parking manoeuvre - there may be a high risk of damage to vehicles or other objects since the sensors are unable to function optimally.

Rear parking assistance

The distance covered to the rear of the car is about 1.5 metres. The acoustic signal for obstacles behind comes from one of the rear loudspeakers.

Rear parking assistance is activated when reverse gear is engaged.

The system must be deactivated when revers- ing with a trailer or bike carrier on the towbar or similar - otherwise they would trigger the sensors.

NOTE

Rear parking assistance is deactivated automatically when towing a trailer if Volvo genuine trailer wiring is used.

Front parking assistance

The distance covered in front of the car is about 0.8 metres. The acoustic signal for obstacles in front comes from one of the front loudspeak- ers.

Front parking assistance is active up to 15 km/h. The lamp in the button is illuminated in order to indicate that the system is activated. When the speed is below 10 km/h the system is reactivated.

NOTE

Front parking assistance is deactivated when the parking brake is applied or P mode is selected in a car with an automatic gear- box.

04 Driver support

Park assist syst*

04

* Option/accessory, for more information, see Introduction. 187

IMPORTANT

When fitting auxiliary lamps: Remember that they must not obscure the sensors the auxiliary lamps could then be detected as obstacles.

Fault indicator

If the information symbol illuminates with constant glow and the informa-

tion display shows Park assist syst Service

required then parking assistance is disen- gaged.

IMPORTANT

In certain conditions the parking assistance system may produce incorrect warning sig- nals that are caused by external audio sources that emit the same ultrasonic fre- quencies that the system works with.

Examples of such sources include horns, wet tyres on asphalt, pneumatic brakes and exhaust noises from motorcycles etc.

Cleaning the sensors

G 03

14 02

Sensor location, front.

Sensor location, rear.

The sensors must be cleaned regularly to ensure that they work properly. Clean them with water and car shampoo.

NOTE

Dirt, ice and snow covering the sensors may cause incorrect warning signals.

04 Driver support

Park assist camera*

04

188 * Option/accessory, for more information, see Introduction.

General

The parking camera is an assist system and is activated when reverse gear is engaged (can be changed in the settings menu, see page 200).

The camera image is shown on the centre con- sole's screen.

NOTE

When a towbar is configured with the car's electrical system, the protrusion of the tow- bar is included when the function measures the parking space.

WARNING

The parking camera serves as an aid. It does not relieve the driver of responsi- bility when reversing.

The camera has blind spots, where obstacles cannot be detected.

Be aware of people and animals in the vicinity of the car.

Function and operation

CAM button location.

The camera shows what is behind the car and if something appears from the sides.

The camera shows a wide area behind the car and part of the bumper and any towbar.

Objects on the screen may appear to tilt slightly - this is normal.

NOTE

Objects on the display screen may be closer to the car than they appear to be on the screen.

If another view is active the parking camera system takes over automatically and the cam- era image is displayed on the screen.

When reverse gear is engaged two unbroken lines are shown graphically which illustrate where the car's rear wheels will roll with the current steering wheel angle, this facilitates tight parking, reversing into tight spaces and for hitching a trailer. The cars approximate external dimensions are illustrated by means of two dashed lines. These help lines can be switched off in the settings menu.

If the car is also equipped with parking assis- tance sensors* then their information is dis- played graphically as coloured fields in order to illustrate the distance to detected obstacles, see page 185.

The camera is active approx. 5 seconds after reverse gear has been disengaged or until the car's speed exceeds 10 km/h.

Camera location next to the opening handle.

04 Driver support

Park assist camera*

04

* Option/accessory, for more information, see Introduction. 189

Light conditions

The camera image is adjusted automatically according to prevailing light conditions. Because of this, the image may vary slightly in brightness and quality. Poor light conditions can result in a slightly reduced image quality.

NOTE

Keep the camera lens clear of dirt, snow and ice to ensure optimum function. This is par- ticularly important in poor light.

Park assist lines

Examples of how the park assist lines can be dis- played for the driver.

The lines on the screen are projected as if they were at ground level behind the car and are directly related to steering wheel movement,

which shows the driver the path the car will take, even when turning.

NOTE

When reversing with a trailer which is not connected electrically to the car, the lines on the display show the route the car will take - not the trailer.

The screen shows no lines when a trailer is connected electrically to the car's electrical system.

The parking camera is deactivated automatically when towing a trailer if a Volvo genuine trailer cable is used.

IMPORTANT

Bear in mind that the screen only shows the area behind the car - pay attention to the sides and front of the car when manoeuvring during reversing.

Boundary lines

The system's lines.

Boundary line, 30 cm zone backwards from the car

Boundary line, free reversing zone

"Wheel tracks"

The unbroken line (1) frames in a zone that is within about 30 cm from the bumper.

The dashed line (2) frames in a zone up to about 1.5 m back from the bumper. It is also the limit of the car's most protruding parts, such as door mirrors and corners - also during turning.

The wide "wheel tracks" (3) between the side lines indicate where the wheels will roll and can extend about 3.2 m back from the bumper if no obstacle is in the way.

04 Driver support

Park assist camera*

04

190 * Option/accessory, for more information, see Introduction.

Cars with reversing sensors*

Coloured areas (x 4, one per sensor) show dis- tance.

If the car is also equipped with parking assis- tance sensors (see page 185) the distance indi- cation will be more precise and the coloured areas show which of the 4 sensors is/are reg- istering an obstacle.

The colour of the areas changes with decreas- ing distance to the obstacle - from yellow to orange to red.

Colour / paint Distance (metres)

Yellow 1.5

Orange 0.31.5

Red 00.3

Settings

Press OK/MENU when a camera view is shown. Make the settings as desired.

Miscellaneous

The default setting is that the camera is activated when reverse gear is engaged.

One press on CAM activates the camera even if reverse gear is not engaged.

Change between normal and zoomed image by turning TUNE or by pressing CAM.

If the car has more cameras* installed then the camera in use is changed by turning TUNE.

Limitations

NOTE

A bike carrier or other accessory mounted on the rear of the car could obscure the camera's view.

Pay attention to the possibility that, even if it only looks like a relatively small part of the image is obscured, it could be a relatively large sector that is hidden from view. Obstacles could thereby go undetected until they are very close to the car.

To bear in mind

Keep the camera lens free from dirt, ice and snow.

Clean the camera lens regularly with luke- warm water and car shampoo - take care not to scratch the lens.

04 Driver support

BLIS* Blind Spot Information System

04

* Option/accessory, for more information, see Introduction. 191

General information on BLIS

G 02

14 26

Rearview mirror with BLIS function1.

BLIS camera

Indicator lamp

BLIS symbol

BLIS is an information system based on cam- era technology that under certain conditions can help the driver to notice vehicles moving in the same direction as the host vehicle in the so- called "blind spot".

WARNING

The system is a supplement to, not a replacement for, a safe driving style and use of the rearview mirrors. It can never replace the driver's attention and responsibility. The responsibility for changing lanes safely always rests with the driver.

The system is designed to work most effec- tively when driving in dense traffic on multi-lane highways.

When a camera (1) has detected a vehicle inside the blind spot zone the indicator lamp (2) illuminates with a constant glow.

NOTE

The lamp illuminates on the side of the car where the system has detected the vehicle. If the car is overtaken on both sides at the same time then both lamps illuminate.

BLIS advises the driver with a message if a fault arises in the system. If for example the sys- tem's cameras are obscured then the BLIS indicator lamp flashes and a message is shown on the information display. In such cases, check and clean the lenses.

If necessary, the system can be switched off temporarily, see the section "Activate/deacti- vate".

Blind spots

A = approx. 9.5 m and B = approx. 3.0 m.

1 NOTE: The illustration is schematic - details may vary depending on car model.

04 Driver support

BLIS* Blind Spot Information System

04

192 * Option/accessory, for more information, see Introduction.

Activate/deactivate

Button for activating/deactivating.

BLIS is activated when the engine is started. The indicator lamps in the door panels flash three times when BLIS is activated.

The system can be deactivated/activated after starting the engine with one press on the BLIS button.

Some combinations of the selected equipment leave no vacant space for a button in the centre console - in which case the function is handled by the car's menu system MY CAR under Settings Car settings BLIS. (For a description of the menu system - see page 200).

When BLIS is deactivated, the lamp in the but- ton goes out and a message is shown in the instrument panel display.

When BLIS is activated the light in the button illuminates, a new text message is shown on the display and the indicator lamps in the door panels flash 3 times. Press the OK button to delete the text message. (For a description of messages - see page 198).

When BLIS operates

The system operates when the car is driven at a speed above 10 km/h.

Overtaking

The system is designed to react if:

you overtake another vehicle at a speed of up to 10 km/h faster than the other vehicle

you are overtaken by a vehicle travelling up to 70 km/h faster than you are travelling.

WARNING

BLIS does not work in sharp bends.

BLIS does not work when the car is revers- ing.

A wide trailer coupled to the car can conceal other vehicles in adjacent lanes. It can pre- vent the vehicle in the screened area from being detected by BLIS.

Daylight and darkness

In daylight the system reacts to the shape of the surrounding vehicles. The system is designed to detect motor vehicles such as cars, trucks, buses and motorcycles.

In darkness the system reacts to the head- lamps of surrounding vehicles. If the head- lamps of surrounding vehicles are not switched on then the system does not detect the vehi- cles. This means for example that the system does not react to a trailer without headlamps which is towed behind a car or truck.

WARNING

The system does not react to cyclists or moped riders.

The BLIS cameras have limitations similar to those of the human eye, i.e. they do not "see" as well e.g. in heavy snowfall, against strong light or in thick fog.

04 Driver support

BLIS* Blind Spot Information System

04

* Option/accessory, for more information, see Introduction. 193

Cleaning

In order to work most effectively the BLIS cam- era lenses must be clean. The lenses can be cleaned with a soft cloth or damp sponge. Clean the lenses carefully so that they are not scratched.

IMPORTANT

The lenses are electrically heated to melt ice or snow. If necessary, brush snow away from the lenses.

Messages on the display

Message Specification

Blind-spot info

system ON

The BLIS system is activated.

Blind spot syst.

Service required

Blind spot syst. dis- engaged - contact a workshop.

Blind spot syst.

Camera blocked

The BLIS camera is blocked by dirt, snow or ice - clean the lenses.

Message Specification

Blind spot syst.

Reduced function

Reduced function in the data transmis- sion between the BLIS system's cam- era and the car's electrical system.

The camera resets itself when the data transmission between the BLIS system's camera and the car's electri- cal system returns to normal.

Blind-spot info

system OFF

The BLIS system is deactivated.

IMPORTANT

Repair of the BLIS system components must only be performed by a workshop - an authorised Volvo workshop is recom- mended.

Limitations

In some situations the BLIS indicator lamp may illuminate despite there being no other vehicle within the blind spot.

NOTE

If the BLIS indicator lamp illuminates on iso- lated occasions despite there being no other vehicle within the blind spot then this does not mean that a fault has arisen in the system.

In the event of a fault in the BLIS system the display shows the text Blind spot syst. Service required.

The following illustrations show examples of situations where the BLIS indicator lamp may illuminate even if there is no other vehicle within the blind spot.

Reflection from shiny wet road surface.

04 Driver support

BLIS* Blind Spot Information System

04

194 * Option/accessory, for more information, see Introduction.

Own shadow on large light smooth surface, e.g. noise barrier or concrete road surface.

Low stationary sunlight shining into the camera.

04 Driver support

04

195

196 * Option/accessory, for more information, see Introduction.

Menus and messages........................................................................... 198 Menu source MY CAR.......................................................................... 200 Climate control...................................................................................... 208 Fuel-driven engine block heater and passenger compartment heater* 218 Additional heater*.................................................................................. 221 Trip computer........................................................................................ 222 Adapting driving characteristics........................................................... 224 Comfort inside the passenger compartment........................................ 225

COMFORT AND DRIVING PLEASURE

05 Comfort and driving pleasure

Menus and messages

05

198 * Option/accessory, for more information, see Introduction.

Combined instrument panel

Information display and controls for menus.

OK access to message list and message confirmation.

Thumbwheel browse between menu options.

RESET reset the active function. Used in certain cases to select/activate a function, see the explanation under each respective function.

The menus shown on the information displays in the combined instrument panel are con- trolled with the left-hand stalk switch. The menus shown depend on key position, see page 78. If a message appears then this must

be acknowledged with OK for the menus to be shown.

Menu overview

Some of the following menu options require the function and hardware to be installed in the car.

---- km to empty tank

--.- l/100km average

--.- l/100km instantaneous

--- km/h average speed

--- km/h current speed1

Engine oil level Wait...*

Tyre pressure Calibration*

Park heat timer --:-- ---*2

Direct start Park heat ON*3

Additional heat auto ON*

Lane Depart Warn *

Driver Alert *

Message

Text message in the information display.

When a warning, information or indicator sym- bol illuminates, a corresponding message appears on the information display. An error message is stored in a memory list until the fault has been rectified.

Press OK to acknowledge and browse between the messages.

1 Only certain markets. 2 Programming is only possible when the engine is switched off. 3 Cannot be selected when the additional heater is operating.

05 Comfort and driving pleasure

Menus and messages

05

199

NOTE

If a warning message appears while you are using the trip computer, the message must be read (press OK) before the previous activity can be resumed.

Message Specification

Stop safelyA Stop and switch off the engine. Serious risk of damage - consult a workshopB.

Stop engineA Stop and switch off the engine. Serious risk of damage - consult a workshopB.

Service urgentA Contact a workshopB to check the car immedi- ately.

Service

requiredA Contact a workshopB to check the car as soon as possible.

See manualA Read the owner's man- ual.

Book time for

maintenance

Time to book regular service - contact a workshopB.

Message Specification

Time for regular

maintenance

Time for regular service - contact a workshopB. The timing is deter- mined by the number of kilometres driven, num- ber of months since the last service, engine run- ning time and oil grade.

Maintenance

overdue

If the service intervals are not followed then the warranty does not cover any damaged parts - contact a work- shopB.

Transmission

oil Change nee-

ded

Contact a workshopB to check the car as soon as possible.

Transmission

performance

low

The gearbox cannot handle full capacity. Drive carefully until the message clearsC.

If shown repeatedly - contact a workshopB.

Message Specification

Transmission

hot Reduce

speed

Drive more smoothly or stop the car in a safe manner. Disengage the gear and run the engine at idling speed until the message clearsC.

Transmission

hot Stop safely

Critical fault. Stop the car immediately in a safe manner and con- tact a workshopB.

Temporarily

OFFA A function has been temporarily switched off and is reset auto- matically while driving or after starting again.

Low battery

Power save

mode

The audio system is switched off to save energy. Charge the bat- tery.

A Part of message, shown together with information on where the problem has arisen.

B An authorised Volvo workshop is recommended. C For more messages concerning automatic transmission, see

page 124.

05 Comfort and driving pleasure

Menu source MY CAR

05

200

General information on MY CAR

Many of the car's functions are handled in this menu source, such as setting the clock, door mirrors and locks.

Navigation in the menus is carried out using buttons on the centre console or with the steer- ing wheel's right-hand keypad.

Certain functions are standard, others are optional - the range also varies depending on the market.

Operation

Centre console controls

Centre console controls for menu navigation.

Press MY CAR to open the menus under MY CAR.

Press OK MENU to select/tick in the high- lighted menu option or to store the selected function in the memory.

Turn the TUNE knob to scroll up/down among the menu options.

EXIT

EXIT functions

Depending on the function the cursor is on when EXIT is pressed, and on the menu level, one of the following occurs:

phone call is rejected

current function is interrupted

input characters are deleted

most recent selections are undone

leads up in the menu system

Short and long presses can also produce vary- ing results.

A long press leads to the highest menu level (Main source view), from where all of the car's functions/menu sources can be accessed - see also page 234.

05 Comfort and driving pleasure

Menu source MY CAR

05

* Option/accessory, for more information, see Introduction. 201

Steering wheel keypad*

The keypad may vary depending on market.

Turn the thumbwheel knob to scroll up/ down among the menu options.

Press the thumbwheel to select/tick in the highlighted menu option or to store the selected function in the memory.

EXIT (see heading "EXIT functions" page 200).

Search paths

Current menu level is shown at the top right of the centre console display screen. Search paths to the menu system functions are descri- bed in this manual in the following form:

Settings Car settings Lock settings

Doors unlock Driver door, then all.

The following is an example of how a function can be accessed and adjusted using the steer- ing wheel keypad:

1. Press the centre console button MY CAR.

2. Scroll to the desired menu, e.g. Settings, with the thumbwheel (1) and then press the thumbwheel - a submenu opens.

3. Scroll to the desired menu, e.g. Car

settings and press the thumbwheel - a submenu opens.

4. Scroll to Lock settings and press the thumbwheel - a new submenu opens.

5. Scroll to Doors unlock and press the thumbwheel - a submenu of selectable functions opens.

6. Choose between the options All doors

and Driver door, then all and press the thumbwheel - a cross is marked in the option's empty box.

7. Exit the programming by backing out of the menus incrementally with short presses on EXIT (2) or with one long press.

The procedure is the same as with the centre console's buttons - see page 200: OK MENU

(2), EXIT (4) and the TUNE knob (3).

MY CAR

The following options are available in menu source MY CAR:

My XC60

DRIVe*

Support systems

Settings

05 Comfort and driving pleasure

Menu source MY CAR

05

202 * Option/accessory, for more information, see Introduction.

My XC60

MY CAR My XC60

The display screen shows a grouping of all of the car's driver support systems - these can be activated or deactivated here.

My DRIVe*

Parts of Volvo's DRIVe concept are described here, amongst other things.

Start/Stop

Eco driving guide

For more information - see page 126.

Driver support system

MY CAR Support systems

The display screen shows a summary of the current status of the car's driver support sys- tems.

Setup - menus

The menus are structured as follows:

Menu level 1

Menu level 2

Menu level 3

Menu level 4

p. x

Shown here are the 4 first menu levels under MY CAR Settings. Some menus have fur- ther submenus - these are then described in detail in their respective sections.

When selecting whether a function should be activated/On or deactivated/Off a square is displayed:

On: Selected square.

Off: Empty square.

Select On/Off with OK - then back out of the menu with EXIT.

Car settings

Car key memory

On

Off

p. 81 and 103

05 Comfort and driving pleasure

Menu source MY CAR

05

203

Lock settings

Automatic door locking

On

Off

Doors unlock

All doors

Driver door, then all

Keyless entry

All doors

Any door

Doors on same side

Both front doors

p. 48, 55 and 57

Reduced Guard

Activate once

Ask when exiting

p. 60 and 64

Side mirror settings

Fold mirrors

Tilt left mirror

Tilt right mirror

p. 103

Light settings

Door lock confirmation light

On

Off

Unlock confirmation light

On

Off

p. 46

Approach light duration

Off

30 sec

60 sec

90 sec

p. 48 and 94

Home safe light duration

30 sec

60 sec

90 sec

p. 94

Triple indicator

On

Off

p. 92

Temporary LH traffic

On

Off

or

Temporary RH traffic

On

Off

p. 94

Active bending lights

On

Off

p. 90

Auxiliary lights

On

Off

p. 91

05 Comfort and driving pleasure

Menu source MY CAR

05

204

Steering wheel force

Low

Medium

High

p. 224

Reset car settings

All menus in Car settings are given original factory settings.

Driver support systems

Collision Warning

On

Off

Warning distance

Long

Normal

Short

Warning sound

On

Off

p. 170

Lane Departure Warning

On

Off

On at start-up

On

Off

Increased sensitivity

On

Off

p. 182

DSTC

On

Off

p. 146

City Safety

On

Off

p. 9 and 165

BLIS

On

Off

p. 191

Distance Alert

On

Off

p. 162

Driver Alert

On

Off

p. 179

System options

Time

The instrument panel clock is set here.

p. 75

Time format

12 h

24 h

p. 75

05 Comfort and driving pleasure

Menu source MY CAR

05

205

Screen saver

On

Off

The TV screen's current content fades out after a period of inac- tivity and is replaced by a blank screen if this option is selected.

The current screen content returns if any of the TV screen's buttons or controls are actuated.

p. 200

Language

Selects language for menu texts.

Show help text

On

Off

Explanatory text for the display screen's current content is shown with this option selected.

Distance and fuel units

MPG (UK)

MPG (US)

km/l

l/100km

p. 222

Temperature unit

Celsius

Fahrenheit

Selects the unit for the display of outside temperature and setting of the climate control system.

Volume levels

Voice output volume

Front park assist volume

Rear park assist volume

Phone ringing volume

Reset system options

All menus in System options are given original factory settings.

Voice settings

Voice tutorial

This menu option + OK provides spoken information about how the system works.

Voice command list

Phone commands

Phone

Phone call con- tact

Phone dial num- ber

Navigation commands

Navigation

Navigation repeat instruc- tion

Navigation go to address

General commands

Help

Cancel

Voice tutorial

The menu options under Phone

commands show several exam- ples of available voice commands - only with a Bluetooth -enabled mobile phone installed. For more

05 Comfort and driving pleasure

Menu source MY CAR

05

206 * Option/accessory, for more information, see Introduction.

and detailed information - see page 261.

The menu options under Naviga-

tion commands show several examples of available voice com- mands - only with Volvo's navi- gation system RTI* installed.

Voice user setting

Default setting

User 1

User 2

Here there is the option to create a second user profile - an advant- age if more than one person shall use the car/system regularly. Default setting gives factory set- tings.

Voice training

User 1

User 2

With Voice training the voice recognition system is taught to recognise the driver's voice and pronunciation. A number of phra- ses are presented on the screen for the driver to read aloud. When the system has learnt how the driver talks, the presentation of the phrases stops. Following which e.g. User 1 can be selected in Voice user setting in order that the system shall listen to the right user.

Voice output volume

A volume control appears on the screen - at which point, proceed as follows:

1. Adjust the volume with the thumbwheel.

2. Test-listen using OK. 3. Use EXIT to store the setting

and the menu is switched off.

Voice POI list

Edit list

The number of facilities is exten- sive and varies depending on market. Maximum 30 favourite facilities can be stored in this list.

Menu option Voice POI list is only shown if Volvo's navigation system RTI* is installed. For more information on Facilities and Voice recognition - see the Navi- gation system's owner's manual.

Audio settings p. 233

Climate settings

05 Comfort and driving pleasure

Menu source MY CAR

05

* Option/accessory, for more information, see Introduction. 207

Automatic blower adjustment

Normal

High

Low

Recirculation timer

On

Off

Automatic rear defroster

On

Off

Interior air quality system

On

Off

Reset climate settings

All menus in Climate settings

are given original factory settings.

p. 208

Favourites (FAV) p. 238

Volvo On Call

Described in a separate manual.

Information

Number of keys p. 46

VIN number p. 372

DivX VOD code p. 254

Bluetooth software version in

car

p. 260

Map and software version*

Only in cars with Volvo GPS nav- igator - see separate manual.

05 Comfort and driving pleasure

Climate control

05

208 * Option/accessory, for more information, see Introduction.

General

Climate control

The car is equipped with electronic climate control. The climate control system cools or heats as well as dehumidifies the air in the pas- senger compartment.

NOTE

The air conditioning system (AC) can be switched off, but to ensure the best possible climate comfort in the passenger compart- ment and to prevent the windows from mist- ing, it should always be on.

Actual temperature

The temperature you select corresponds to the physical experience with reference to factors such as air speed, humidity and solar radiation etc. in and around the car.

The system includes a sun sensor which detects on which side the sun is shining into the passenger compartment. This means1 that the temperature can differ between the right and left-hand air vents despite the controls being set for the same temperature on both sides.

Sensor location

The sun sensor is located on the top side of the dashboard.

The temperature sensor for the passenger compartment is located below the climate control panel.

The outside temperature sensor is located on the door mirror.

The humidity sensor* is located by the inte- rior rearview mirror.

NOTE

Do not cover or block the sensors with clothing or other objects.

Side windows and panorama roof

To ensure that the air conditioning works opti- mally the side windows, and panorama roof if appropriate, should be closed.

Misting windows

Remove misting on the insides of the windows by primarily using the defroster function.

To reduce the risk of misting, keep the win- dows clean and use window cleaner.

Temporary shut-off of the air

conditioning

When the engine requires full power, e.g. for full acceleration or driving uphill with a trailer, the air conditioning can be temporarily switched off. There may then be a temporary increase in temperature in the passenger compartment.

Condensation

In warm weather, condensation from the air conditioning may drip under the car. This is normal.

Ice and snow

Remove ice and snow from the climate control system air intake (the grille between the bonnet and the windscreen).

Total airing function

The function opens/closes all side windows simultaneously and can be used for example to quickly air the car during hot weather, see page 57.

Passenger compartment filter

All air entering the car's passenger compart- ment is cleaned with a filter. This must be replaced at regular intervals. Follow the Volvo Service Programme for the recommended replacement intervals. If the car is used in a

1 Only applies to ECC.

05 Comfort and driving pleasure

Climate control

05

* Option/accessory, for more information, see Introduction. 209

severely contaminated environment, it may be necessary to replace the filter more often.

NOTE

There are different types of passenger com- partment filter. Make sure that the correct filter is fitted.

Clean Zone Interior Package (CZIP)*

This option keeps the passenger compartment clear of allergy and asthma inducing sub- stances. For more information on CZIP, see the brochure included with the purchase of the car.

The following is included:

An enhanced fan function that means that the fan starts when the car is opened with the remote control key. The fan fills the passenger compartment with fresh air. The function starts when required and is dis- engaged automatically after a time or when one of the passenger compartment doors is opened. The amount of time the fan runs is reduced gradually due to reduced need up until the car is 4 years old.

The air quality system IAQS is a fully auto- matic system that cleans the air in the pas- senger compartment from contaminants such as particles, hydrocarbons, nitrous oxides and ground-level ozone.

NOTE

To keep the CZIP standard in cars with CZIP the IAQS filter must be changed after 15 000 km or once per year depending on whichever occurs first. However, up to 75 000 km over 5 years. In cars without CZIP and where the customer does not want to keep the CZIP standard the IAQS filter must be changed at a regular service.

Use of tested materials in the interior

equipment.

The materials have been developed in order to minimise the quantity of dust in the passenger compartment and they contribute to making the passenger compartment easier to keep clean. The carpets in both the passenger com- partment and the cargo area are removable and easy to remove and clean. Use cleaning agents and car care products recommended by Volvo, see page 366.

Menu settings

It is possible to activate/deactivate or change the default settings for four of the climate con- trol system's functions via the centre console. For general information about menu naviga- tion, see page 201:

Fan speed in automatic mode*, see page 214.

Recirculation timer for passenger com- partment air, see page 215.

Automatic rear window defrosting, see page 104.

Air quality system IAQS*, see page 215

The climate control system's functions can be reset to the default settings via the menu sys- tem in MY CAR and this is carried out under: Settings Climate settings Reset

climate settings.

Air distribution

The incoming air is divided between a number of different vents in the passenger compart- ment.

05 Comfort and driving pleasure

Climate control

05

210 * Option/accessory, for more information, see Introduction.

Air distribution is fully automatic in AUTO

mode*.

If necessary it can be controlled manually, see page 217.

Air vents in the dashboard

Open

Closed

Lateral airflow

Vertical airflow

Aim the outer vents at the side windows to remove misting.

Air vents in the door pillars

Closed

Open

Lateral airflow

Vertical airflow

Aim the vents at the windows to remove mist- ing in cold weather.

Aim the vents into the passenger compartment to maintain a comfortable climate in the rear seat in hot weather.

NOTE

Remember that small children may be sen- sitive to air flows and draughts.

05 Comfort and driving pleasure

Climate control

05

* Option/accessory, for more information, see Introduction. 211

Electronic climate control, ECC*

Temperature control, left-hand side

Electrically heated front seat, left-hand side

Max. defroster

Fan

Air distribution - ventilation floor

Air distribution - air vent instrument panel

Air distribution - defroster windscreen

Rear window and door mirror defrosters, see page 104

Electrically heated front seat, right-hand side

Temperature control, right-hand side

Recirculation

AUTO

AC Air conditioning on/off

05 Comfort and driving pleasure

Climate control

05

212

Electronic Temperature Control, ETC

Fan

Electrically heated front seat, left-hand side

AC Air conditioning on/off

Max. defroster

Air distribution - ventilation floor

Air distribution - air vent instrument panel

Air distribution - defroster windscreen

Rear window and door mirror defrosters, see page 104

Recirculation

Electrically heated front seat, right-hand side

Temperature control

05 Comfort and driving pleasure

Climate control

05

* Option/accessory, for more information, see Introduction. 213

Operating the controls

Heated seats*

Front seats

Current heat level is shown in the centre console TV screen.

One press on the button gives the highest heat level - three orange lamps illuminate in the centre console TV screen (see figure above).

Press the button twice for a lower heat level two orange lamps illuminate in the TV screen.

Press the button three times for the lowest heat level one orange lamp illuminates in the TV screen.

Press the button four times to switch off the heat no lamps illuminate.

WARNING

The heated seat should not be used by peo- ple who find it difficult to perceive tempera- ture increase because of sensory loss or for any reason have difficulty in managing to use the control of the heated seat. Other- wise, burn injuries may arise.

Rear seat2

Press the button once for the highest heat level three lamps illuminate.

Press the button twice for a lower heat level two lamps illuminate.

Press the button three times for the lowest heat level one lamp illuminates.

Press the button four times to switch off the heat no lamps illuminate.

Fan

NOTE

If the fan is fully switched off then the air conditioning is not engaged - which can cause a risk of misting on the windows.

Fan knob for ECC*

Turn the knob to increase or decrease fan speed. If AUTO

is selected then fan speed is regulated automatically. The previously set fan speed is disengaged.

2 Not included if 2-stage booster cushion is selected.

05 Comfort and driving pleasure

Climate control

05

214 * Option/accessory, for more information, see Introduction.

Fan knob for ETC

Turn the knob to increase or decrease fan speed.

Air distribution

Air distribution - defroster windscreen

Air distribution - air vent instrument panel

Air distribution - ventilation floor

The figure consists of three buttons. When pressing the buttons the corresponding figure is illuminated in the TV screen (see figure below) and an arrow in front of each part of the

figure shows the air distribution that is selected. For more information on air distribu- tion, see page 217.

The selected air distribution is shown in the centre console TV screen.

AUTO1

The Auto function automati- cally regulates temperature, air conditioning, fan speed, recirculation, and air distribu- tion.

If you select one or more manual functions, the other functions continue to be controlled auto- matically. All manual settings are disengaged

when AUTO is pressed. The TV screen shows AUTO CLIMATE.

Fan speed in automatic mode can be set in the menu system MY CAR under: Settings

Climate settings Automatic blower

adjustment. Choose between Low, Normal

or High:

Low - Automatic fan control. Low airflow is prioritised.

Normal - Automatic fan control.

High - Automatic fan control. A more intense airflow is prioritised.

For a description of the menu system, see page 201.

Temperature control

The temperature can be adjusted with the knob. For ECC* the temperature for the driver's side and the passen- ger side can be set sepa- rately.

When the car is started, the most recent setting is resumed.

1 Only applies to ECC.

05 Comfort and driving pleasure

Climate control

05

* Option/accessory, for more information, see Introduction. 215

NOTE

Heating or cooling cannot be hastened by selecting a higher/lower temperature than the actual temperature required.

AC Air conditioning on/off

When the lamp in the AC but- ton illuminates, the air condi- tioning is controlled by the system's automatic function. This way, incoming air is cooled and dehumidified.

When the lamp in the AC button is switched off the air conditioning is disconnected. Other functions are still controlled automatically. When the max. defroster function is activated the air conditioning is switched on automati- cally, so that the air is dehumidified at the maxi- mum setting.

Max. defroster

Used to quickly remove mist- ing and ice from the wind- screen and side windows. Air flowing to the windows. The light in the defroster button illuminates when the function is active.

The following also takes place in order to pro- vide maximum dehumidification in the passen- ger compartment:

the air conditioning is automatically engaged

recirculation and the air quality system are automatically disengaged.

NOTE

The noise level increases as the fan is oper- ating at max.

When the defroster is switched off the climate control returns to the previous settings.

Recirculation

Recirculation

When recirculation is engaged the orange lamp in the button illuminates. The function is selected to shut out bad air, exhaust gases etc. from the passenger com- partment. The air in the pas-

senger compartment is recirculated, i.e. no outside air is taken into the car when this func- tion is activated.

IMPORTANT

If the air in the car recirculates for too long, there is a risk of misting on the insides of the windows.

Timer

With the timer function activated the system will exit manually activated recirculation mode according to a time that depends on the out- side temperature. This reduces the risk of ice, misting and bad air. Activate/deactivate the function in the menu system MY CAR under Settings Climate settings

Recirculation timer. For a description of the menu system, see page 201.

NOTE

When max. defroster is selected, recircula- tion is always deactivated.

Air quality system IAQS*

The air quality system separates gases and particles to reduce the levels of odours and pollution in the passenger compartment. If the outside air is contaminated then the air intake is closed and the air is recirculated.

Activate/deactivate the function in the menu system MY CAR under Settings Climate

05 Comfort and driving pleasure

Climate control

05

216 * Option/accessory, for more information, see Introduction.

settings Interior air quality system. For a description of the menu system, see page 201.

NOTE

The air quality sensor should always be engaged in order to obtain the best air in the passenger compartment.

Recirculation is limited in cold weather to avoid misting.

If the insides of the windows start misting up, disengage the air quality sensor, and the defroster functions for the windscreen, the side and the rear windows should also be used to demist the windows.

Cars with Eco Start/Stop DRIVe*

With an auto-stopped engine certain equip- ment has its function temporarily reduced, e.g. climate control fan speed. For more informa- tion, see page 126.

05 Comfort and driving pleasure

Climate control

05

217

Air distribution table

Air distribution Use Air distribution Use

Air to windows. Some air flows from the air vents. The air is not recirculated. Air conditioning is always engaged.

to remove ice and misting quickly.

Air to the floor and win- dows. Some air flows from the dashboard air vents.

to ensure comfortable conditions and good demisting in cold or humid weather.

Air to windscreen, via defroster vent, and side windows. Some air flows from the air vents.

to prevent misting and icing in a cold and humid climate, (not at too low fan speed to enable this).

Air to floor and from dashboard air vents.

in sunny weather with cool outside tempera- tures.

Airflow to windows and from dashboard air vents.

to ensure good comfort in warm, dry weather.

Air to floor. Some air flows to the dashboard air vents and windows.

to direct heat or cold to the floor.

Airflow to the head and chest from the dashboard air vents.

to ensure efficient cooling in warm weather.

Airflow to windows, from dashboard air vents and to the floor.

to provide cooler air along the floor or warmer air higher up in cold weather or hot, dry weather.

05 Comfort and driving pleasure

Fuel-driven engine block heater and passenger compartment heater*

05

218 * Option/accessory, for more information, see Introduction.

Fuel-driven heater

General information about the parking

heater

The parking heater heats the engine and pas- senger compartment and can be started directly or with the timer.

Two different times can be selected using the timer. Here, time refers to the time when the car is heated and ready. The car's electronic sys- tem calculates when heating should be started based on the outside temperature.

The heater cannot start if the outside tempera- ture exceeds 15 C. At 5 C or lower the maximum running time of the parking heater is 50 minutes.

WARNING

The car must be outdoors when the parking heater is used.

NOTE

When the parking heater is active there may be smoke from the right-hand wheel hous- ing, which is perfectly normal.

Refuelling

Warning label on fuel filler flap.

WARNING

Fuel which spills out can be ignited. Switch off the fuel-driven heater before starting to refuel.

Check the information display to see that the parking heater is switched off. When it is running, the information display shows Park heat ON.

Parking on a hill

If the car is parked on a steep hill, the front of the car should point downhill to ensure that there is a supply of fuel to the parking heater.

Battery and fuel

If the battery has insufficient charge or the fuel level is too low, the parking heater will be switched off automatically and a message appears on the information display. Acknowl- edge the message by pressing the indicator stalk OK button once, see page 219.

IMPORTANT

Repeated use of the parking heater com- bined with short journeys may discharge the battery and impair starting.

The car should be driven for the same time as the heater is used to ensure that the car's battery is recharged adequately to replace the energy consumed by the heater when it is used on a regular basis.

05 Comfort and driving pleasure

Fuel-driven engine block heater and passenger compartment heater*

05

* Option/accessory, for more information, see Introduction. 219

Operation

OK button

Thumbwheel

RESET - resets/selects

For more information on the information dis- play and OK, see page 198.

Symbols and display messages

When one of the timer's settings or Direct start is activated, the infor-

mation symbol in the combined instrument panel illuminates while the information display shows an explanatory text and a further illumi- nated symbol. The table shows symbols and display texts that appear.

NOTE

G 02 51 02 - Figure 2 in the symbol means the

second climate control system in the car, where the normal climate control system is the first. The figure 2 has nothing to do with TIMER 1 or TIMER 2.

Sym- bol

Display Specification

G 02 51 02

Fuel

heater

ON

The heater is switched on and running.

G 02 51 02

Timer is

set for

Fuel

heater

The heater's timer is activated after the remote control key has been removed from the ignition switch and leaving the car - the engine and passenger com- partment are heated at the set time.

Sym- bol

Display Specification

G 02 51 02

Heater

stopped

Batt. save

mode

The heater has been stopped by the car's electron- ics in order to facil- itate starting the engine.

G 02 51 02

Heater

unavail.

Low fuel

level

Setting the heater is not possible due to fuel level being too low (approx. 7 litres) - this is in order to facilitate starting the engine as well as approx. 50 km driving.

G 02 51 02

Park

heater

Service

required

Heater not work- ing. Contact a workshop for repair. Volvo rec- ommends that you contact an author- ised Volvo work- shop.

05 Comfort and driving pleasure

Fuel-driven engine block heater and passenger compartment heater*

05

220 * Option/accessory, for more information, see Introduction.

A display text clears automatically after a time or after one press on the indicator stalk OK

button.

Direct start and immediate stop

1. Scroll with the thumbwheel to Direct start

Park heat.

2. Press RESET to select between ON and OFF.

ON: Parking heater switched on manually or with programmed timer.

OFF: Parking heater switched off.

Following the direct start of the heater it will be activated for 50 minutes.

Heating of the passenger compartment will begin as soon as the engine coolant has reached the correct temperature.

NOTE

The car can be started and driven while the parking heater is running.

Setting the timer

The time when the car shall be used and heated is specified with the timer.

Select between TIMER 1 and TIMER 2.

NOTE

The timer can only be programmed when the remote control key is in key position I, see page 78 - programming must therefore be carried out before starting the engine.

1. Scroll with the thumbwheel to Park heat

timer 1.

2. Briefly press RESET to move to the flash- ing hours setting.

3. Select the required hour using the thumb- wheel.

4. Briefly press RESET to move to the flash- ing minutes setting.

5. Select the required minute using the thumbwheel.

6. Briefly press RESET to confirm the setting.

7. Press RESET to activate the timer.

After setting Park heat timer 1 a second start time can be programmed with Park heat timer

2 by scrolling to it with the thumbwheel.

Set the alternative time in the same way as Park heat timer 1.

Deactivating a timer-started heater

A timer-started heater can be switched off manually before the set time has elapsed. Pro- ceed as follows:

1. Press OK.

2. Use the thumbwheel to scroll to the text Park heat timer 1 or 2. > The text ON flashes on the display.

3. Press RESET. > The text OFF is shown with a constant

glow and the heater is switched OFF.

A timer-started heater can be switched off in accordance with the instructions in the section "Direct start and immediate stop", see page 220.

Clock/timer

The heater's time is connected to the car's clock.

NOTE

All timer programming will be cleared if the car's clock is reset.

05 Comfort and driving pleasure

Additional heater*

05

* Option/accessory, for more information, see Introduction. 221

General information about the additional heater

In cold climate zones1 an additional heater may be required to obtain the correct operating temperature in the engine and to obtain suffi- cient heating in the passenger compartment.

Fuel-driven additional heater

A fuel-driven additional heater is fitted in cars with diesel engines.

The heater starts automatically when extra heat is required when the engine is running.

The heater is switched off automatically when the correct temperature is reached or when the engine is switched off.

NOTE

When the additional heater is active there may be smoke from the right-hand wheel housing which is perfectly normal.

Auto mode or shutdown

The additional heater's automatic start sequence can be switched off if required.

OK button

Thumbwheel

RESET button

1. Before starting the engine: Select key posi- tion I, see page 78.

2. Scroll with the thumbwheel to Additional

heat auto.

3. Press RESET to select between ON and OFF.

NOTE

The menu options are only visible in key position I - any adjustments must therefore be made before starting the engine.

Passenger compartment heater*

If the additional heater is supplemented with timer function then it can be used as a fuel- driven passenger compartment heater, see page 218.

Electric additional heater

Cars with certain petrol engines2 have an elec- tric additional heater integrated into the car's climate control system.

In a semi-cold1 climate zone diesel-driven cars have an electric additional heater instead of a fuel-driven version.

The heater cannot be controlled manually but is instead activated automatically after the engine has been started in outside tempera- tures below 14 C and is switched off after the set passenger compartment temperature has been reached.

1 An authorised Volvo dealer has information regarding the geographical areas concerned. 2 An authorised Volvo dealer has information regarding the engines concerned.

05 Comfort and driving pleasure

Trip computer

05

222 * Option/accessory, for more information, see Introduction.

General

Information display and controls.

OK - confirms.

Thumbwheel browse between menus and options in the trip computer list.

RESET resets.

The trip computer's menu is in a variable loop. One of the menu options is a blank display - it also marks the beginning/end of the loop.

Functions

NOTE

If a warning message appears when the trip computer is used then the message must first be acknowledged before the trip com- puter can be reactivated. Acknowledge the warning message by pressing OK.

To change unit for distance and speed - go to MY CAR Settings System options

Distance and fuel units, see page 200.

Average speed

Average speed is calculated from the last resetting. Reset using RESET.

Instantaneous

Current fuel consumption is calculated every second. The information on the display is updated every couple of seconds. When the car is stationary, "----" appears on the display.

Average

Average fuel consumption is calculated from the last resetting. Reset using RESET.

NOTE

There may be a slight error in the reading if a fuel-driven supplementary and/or parking heater* has been used.

Km to empty tank

The calculation is based on the average fuel consumption over the last 30 km and the remaining driveable fuel quantity. The display shows the approximate distance that can be driven with the fuel quantity remaining in the tank.

An economic driving style generally results in a longer driving distance. For more information on how fuel consumption can be influenced, see page 11.

No guaranteed range remains when the display shows "---- km to empty tank". Refuel as soon as possible.

NOTE

There may be a slight error in the reading if the driving style has been changed.

Resetting

1. Select --- km/h average speed or --.- l/ 100km average.

05 Comfort and driving pleasure

Trip computer

05

* Option/accessory, for more information, see Introduction. 223

2. Press and hold RESET for approx. 1 second to reset the selected function. If RESET is kept depressed for at least 3 three seconds then Average speed and Average are reset simultaneously.

Current speed*1

The instrument panel display changes to show current speed in mph (miles per hour) if the speedometer is graduated in km/h. If the speedometer is graduated in mph then the dis- play changes to km/h.

1 Only certain markets.

05 Comfort and driving pleasure

Adapting driving characteristics

05

224 * Option/accessory, for more information, see Introduction.

Active chassis - Four-C*

Active chassis, Four-C (Continously Controlled Chassis Concept), regulates the characteris- tics of the shock absorbers so that the car's driving characteristics can be adjusted. There are three settings: Comfort, Sport and Advanced.

Comfort

This setting means that the car is perceived as being more comfortable on rough and uneven road surfaces. Shock absorption is soft and the movement of the body is smooth and gentle.

Sport

This setting means that the car is perceived as being more sporty and is recommended for more active driving. Steering response is faster than in the Comfort mode. Shock absorption is harder and the body follows the road in order to reduce rolling during cornering.

Advanced

This setting is only recommended on very even and smooth road surfaces.

The shock absorbers are optimised for maxi- mum roadholding and rolling in bends is further minimised.

Operation

Chassis settings.

Use the buttons in the centre console to change setting. The setting in use when the engine is switched off is activated next time the engine is started.

Speed related power steering*

Steering force increases with the speed of the car to give the driver enhanced sensitivity. The steering is firmer and more immediate on motorways. Steering is light and requires no extra effort when parking and at low speed.

The driver can choose between three different levels of steering force for road responsiveness or steering sensitivity. Go to the menu system MY CAR and locate Settings Car settings

Steering wheel force and select Low, Medium or High.

For a description of the menu system, see page 200. This menu cannot be accessed while the car is in motion.

05 Comfort and driving pleasure

Comfort inside the passenger compartment

05

225

Storage spaces

05 Comfort and driving pleasure

Comfort inside the passenger compartment

05

226 * Option/accessory, for more information, see Introduction.

Storage compartment in door panel

Storage pocket* on front edge of front seat cushions

Ticket clip

Glovebox

Storage compartment, cup holder

Jacket holder

Cup holder* in armrest, rear seat

Storage pocket

Jacket holder

The jacket holder is only designed for light clothing.

WARNING

Keep loose objects such as mobile phones, cameras, remote controls for accessories, etc. in the glove compartment or other com- partments. Otherwise they may injure peo- ple in the car in the event of sudden braking or a collision.

Tunnel console

Storage compartment (e.g. for CDs) and USB*/AUX input under the armrest.

Includes cup holder for driver and passen- ger. (If ashtray and cigarette lighter are specified then there is a cigarette lighter in the 12 V socket for the front seat, see page 227, and a detachable ashtray in the cup holder.)

Avoid storing coins, keys or similar metal objects in the cup holder as such objects could accidentally trigger the alarm*, see page 63.

Cigarette lighter and ashtray*

The ashtray in the tunnel console is detached by lifting the tray straight up.

Activate the lighter by pushing in the button. The button pops out when the lighter is hot. Pull

out the lighter and light a cigarette on the heated coils.

Glovebox

The owner's manual and maps can be kept here for example. There are also holders for pens on the inside of the lid. The glovebox can be locked using the key blade, see pages 50 and 57.

05 Comfort and driving pleasure

Comfort inside the passenger compartment

05

* Option/accessory, for more information, see Introduction. 227

Inlay mats*

Volvo supplies specially manufactured inlay mats.

WARNING

Before setting off check that the inlaid mat in the driver area is firmly affixed and secured in the pins in order to avoid getting caught adjacent to and under the pedals.

Vanity mirror

Vanity mirror with lighting.

The lamp for the vanity mirror, on the driver's side* and passenger side respectively, is switched on automatically when the cover is raised.

12 V socket

G 03

14 35

12 V socket, front seat.

G 02

14 40

12 V socket in tunnel console, rear seat.

The electrical socket can be used for various accessories designed for 12 V, e.g. TV screens, music players and mobile phones. For the

socket to supply current, the remote control key must be in at least key position I, see page 78.

WARNING

Always leave the plug in the socket when the socket is not in use.

NOTE

Optional equipment and accessories - e.g. TV screens, music players and mobile phones - which are connected to one of the passenger compartment's 12V electrical sockets, could be activated by the climate control system, even when the remote con- trol key has been removed or when the car is locked, for example, when the parking heater is activated at a preset time.

For this reason remove the plugs from the electrical sockets for optional equipment or accessories when not in use because the battery could be drained in the event of such an occurrence!

05 Comfort and driving pleasure

Comfort inside the passenger compartment

05

228 * Option/accessory, for more information, see Introduction.

IMPORTANT

Max. socket is 10 A (120 W) if one socket is used at a time. If both sockets in the tunnel console are used simultaneously, 7.5 A (90 W) per socket is applicable.

If the compressor for emergency puncture repair is connected to one of the two sock- ets, no other current consumer must be connected to the other one.

NOTE

The compressor for temporary emergency puncture repair has been tested and approved by Volvo. For information on the use of Volvo's recommended temporary emergency puncture repair (TMK), see page 325.

Electrical socket in cargo area*

For more information, see page 300.

05 Comfort and driving pleasure

05

229

230 * Option/accessory, for more information, see Introduction.

General information on infotainment..................................................... 232 Radio..................................................................................................... 244 Media player......................................................................................... 251 External audio source via AUX/USB* input........................................... 255

Media Bluetooth * ................................................................................ 258

Bluetooth handsfree*.......................................................................... 261 Voice recognition* mobile phone.......................................................... 270 TV*......................................................................................................... 274 Remote control* ................................................................................... 278 RSE - Rear Seat Entertainment system* .............................................. 280

INFOTAINMENT SYSTEM

06 Infotainment system

General information on infotainment

06

232 * Option/accessory, for more information, see Introduction.

General

The infotainment system consists of radio, media player, TV* and the facility to communi- cate with mobile phone*. Information is pre- sented on a 5 or 7-inch* colour screen in the upper section of the centre console. Functions can be controlled via buttons in the steering wheel, in the centre console under the colour screen or via a remote control*. A mobile phone can also be controlled with voice recognition in certain cases.

If the Infotainment System is active when the engine is switched off then it is automatically activated the next time the key is inserted into key position I or higher, and it continues with the same source (e.g. radio) as before the engine was switched off (the driver's door must be closed on cars with Keyless systems*).

The infotainment system can be used for 15 minutes at a time without the remote control key being in the ignition switch by pressing the On/Off button.

When the car is being started the infotainment system is switched off temporarily and contin- ues when the engine has started.

NOTE

Remove the remote control key from the ignition switch if the infotainment system is used when the engine is switched off. This is to avoid discharging the battery unnec- essarily.

Dolby, Pro Logic

Made under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Audyssey MultEQ1

The Audyssey MultEQ system has been used in the development and tuning of the sound to ensure a world-class sound experience.

1 Only applies to Premium Sound Multimedia.

06 Infotainment system

General information on infotainment

06

* Option/accessory, for more information, see Introduction. 233

Overview

A/V-AUX input*

Steering wheel keypad (with*/without thumbwheel).

TV screen. The TV screen is available in two sizes: 5 and 7-inch. The manual shows a 7-inch TV screen.

Centre console control panel

Rear control panel with headphones socket*

AUX2 and USB3 inputs for external audio sources (e.g. iPod )

Operating the system

Steering wheel keypad as alternative to controls in the centre console.

SOUND - press for access to audio settings (bass, treble, etc.). For more information, see page 239.

VOL turn to raise or lower the volume.

ON/OFF/MUTE - short press starts the system and long press (until the screen is off) switches off. Note that the whole of the Sensus system (including navigation * and phone func- tions*) starts/switches off at the same time. Briefly press to mute the sound (MUTE) or restore the sound if it had been switched off.

Main sources - press to select the main source (e.g. RADIO, MEDIA). Last active source is shown (e.g. FM1). If you are in MEDIA or TEL and press the main source but- ton then a shortcut menu is shown with com- monly used menu options.

OK/MENU - Press to accept options in menus. Leads to menu view in selected source (e.g. RADIO or MEDIA). Arrow to the right of the screen is shown when there are underlying menus.

TUNE - turn to scroll among disc tracks/ folders, radio and TV* stations, phone con- tacts* or navigate through options on the TV screen.

2 Only applies to Performance 3 Does not apply to Performance

06 Infotainment system

General information on infotainment

06

234 * Option/accessory, for more information, see Introduction.

EXIT - short press leads upwards in the menu system, interrupts current function, inter- rupts/rejects phone calls or erases entered characters. Long press leads to normal view, or if you are in normal view to the highest menu level, see Main source view page 234.

INFO - If more information than can be shown on the screen is available, press the INFO button to see the remaining information.

Preset buttons, input of numbers and let- ters.

FAV shortcut to a favourite setting. The button can be programmed for a commonly used function in AM, FM, etc. For more infor- mation, see page 238.

Steering wheel keypad

The steering wheel keypad can be used as an alternative to the buttons in the centre console.

The keypad is available in three different ver- sions depending on the options and the equip- ment level of the car.

Keypad with thumbwheel*

Short presses scroll between disc tracks or preset radio stations4. A long press

fast-winds disc tracks or searches for the next available radio station.

Volume - press to raise or lower the audio volume.

EXIT - short press leads upwards in the menu system, interrupts current function, interrupts/rejects phone calls or erases entered characters. Long press leads to normal view, or if you are in normal view to the highest menu level, see Main source view page 234.

OK/MENU/TUNE - Press to accept options in menus. Leads to the menu view in the selected source (e.g. RADIO or MEDIA). Arrow to the right of the screen is shown when there are underlying menus. Turn to scroll among disc tracks/folders, radio and TV* stations, phone contacts* or navigate through options on the TV screen.

Without voice recognition5 - press to switch off the radio/media audio (MUTE) or restore the audio if it has been switched off. With voice recognition6 - Voice recogni- tion (for Bluetooth -connected mobile phone and navigation system*).

Main source view

A long press on EXIT on the steering wheel keypad* leads to normal view. If you are in nor- mal view and give a long press on EXIT then it is possible to access the same main source buttons that are in the centre console:

NAV - Volvo's navigation system (RTI)*, is described in a separate owner's manual.

RADIO - AM, FM, DAB*

4 Does not apply to DAB. 5 Applies to cars without navigation. 6 Only cars with navigation.

06 Infotainment system

General information on infotainment

06

* Option/accessory, for more information, see Introduction. 235

MEDIA - CD, DVD, AUX, USB*, Bluetooth *, TV*.

TEL Bluetooth handsfree*

MY CAR - Car settings, see page 200.

CAM - Park Assist Camera*, see page 188

Keypad without thumbwheel

Short presses scroll between disc tracks or preset radio stations7. A long press

fast-winds disc tracks or searches for the next available radio station.

Volume - press to raise or lower the audio volume.

7 Does not apply to DAB.

06 Infotainment system

General information on infotainment

06

236

Menus

The example shows navigation to different functions when a disc is played back. (1) Main source button, (2) Normal view, (3) Shortcut view, (4) Quick view, (5) Menu view

06 Infotainment system

General information on infotainment

06

* Option/accessory, for more information, see Introduction. 237

Select main source by pressing a main source button (1) (RADIO, MEDIA, TEL). To navigate in the source's menus, use the controls for TUNE, OK/MENU or EXIT.

Use TUNE to scroll in the menu, select the highlighted menu bar with OK/MENU or go back with EXIT. In some cases it is possible to access a shortcut menu by pressing the active source's main source button (1).

For Menu overview, see page 240.

NOTE

If the car is equipped with a steering wheel keypad with a thumbwheel*, these can be used instead of the controls in the centre console (TUNE, OK/MENU, EXIT), see page 234.

Views in the TV screen

For each main source there are four basic types of views:

Normal view (2) - normal mode for the source

Shortcut menu (3) - shows commonly used menu options in the main sources TEL and MEDIA (accessed by pressing the active source's main source button (1)).

Quick view (4) - fast mode when TUNE is turned, e.g. for changing disc tracks, radio station, etc.

Menu view (5) - for menu navigation (accessed by pressing OK/MENU).

The views have different appearances depend- ing on the source, in-car equipment, settings, etc.

Pop-up menu8 video and TV*

Press OK/MENU when a video file is being played back or TV* is being shown in order to access the pop-up menu.

Rear control panel with headphones socket*

Headphones with an impedance of 16-32 ohm and sensitivity of 102 dB or higher are recommended for best sound reproduc- tion.

VOLUME Volume, left and right.

Scroll/search forward and backward.

MODE - Select between AM, FM1, FM2, DAB1*, DAB2*, Disc, USB*, iPod*, Bluetooth*, AUX, TV* and On/Off. For connection via USB* or AUX, see page 255 or via Bluetooth *, see page 259.

Headphones sockets (3.5 mm).

Activate/deactivate

The control panel is activated with MODE. Deactivation is possible via a long press on MODE or when the engine is switched off.

8 Only applies when playing back videos or displaying TV*.

06 Infotainment system

General information on infotainment

06

238 * Option/accessory, for more information, see Introduction.

Scroll/search forward and backward

Pressing (2) scrolls between disc tracks/audio files or seeks the next available radio station.

Limitations

NOTE

The audio source (e.g. FM1, AM, Disc etc.) being played back through the speakers cannot be controlled from the rear control panel.

NOTE

In order that an audio source can be selected with MODE and listened to it is required that the audio source is available and connected in the car.

FAV - store a preset

The FAV button can be used to store functions that are used frequently so that the function can be started simply by pressing FAV. You can select a favourite (e.g. Equalizer) for each function as follows:

In RADIO mode:

AM

FM1/FM2

DAB1*/DAB2*

In MEDIA mode:

DISC

USB*

iPod*

Bluetooth*

AUX

TV*

It is also possible to select and store a favourite for MY CAR, CAM* and NAV*. Favourites can also be selected and stored under MY CAR. For more information on the menu system MY

CAR, see page 200.

To store a function in the FAV button:

1. Select a main source (e.g. RADIO, MEDIA).

2. Select a wavelength or source (AM, Disc, etc.).

3. Press and hold the FAV button until the "favourites menu" is shown.

4. Turn TUNE to select an option from the list and press OK/MENU to save. > When the main source (e.g. RADIO,

MEDIA) is active the stored function is available via a short press on FAV.

06 Infotainment system

General information on infotainment

06

* Option/accessory, for more information, see Introduction. 239

General audio settings

Press SOUND to access the audio settings menu (Bass, Treble, etc.). Scroll forward with SOUND or OK/MENU to your selection (e.g. Treble).

Adjust the setting by turning TUNE and save the setting with OK/MENU.

Continue pressing SOUND or OK/MENU to access other options:

Surround9 - Can be set to the On/Off posi- tion. When On is selected, the system selects the setting for optimal sound repro- duction. Normally DPLII and then appear in the TV screen. If the recording is made with Dolby Digital technology then playback will take place with this setting,

then appears in the TV screen. When Off is selected, 3-channel stereo is available.

Bass - Bass level.

Treble - Treble level.

Fader Balance between the front and rear speakers.

Balance Balance between the left and right-hand speakers.

Subwoofer*9 - Bass speaker level.

DPL II centre level3 channel centre

level9 - Volume for centre speaker.

DPL II surround level9, 10 Level for sur- round.

Advanced audio settings

Equalizer11

The volume level can be adjusted separately for different wavelengths.

1. Press OK/MENU to access Audio

settings and select Equalizer.

2. Select wavelength by turning TUNE and confirm with OK/MENU.

3. Adjust the audio settings by turning TUNE and confirm with OK/MENU. Con- tinue in the same way with other wave- lengths you want to change.

4. When you have finished with audio set- tings, press EXIT to confirm and return to normal view.

For general information on menu navigation, see page 236 and menu overview, see page 240.

Sound stage9

The sound experience can be optimised for the driver's seat, both front seats or the rear seat. If there are passengers in both the front and rear seats then the option recommended is; both front seats. The options can be selected under Audio settings Sound stage.

For general information on menu navigation, see page 236 and menu overview, see page 240.

Audio volume and automatic volume

control

The audio system compensates for disrupting noises in the passenger compartment by increasing the volume in relation to the speed of the car. The compensation level can be set to low, medium, high or off. Select the level under Audio settings Volume

compensation.

For general information on menu navigation, see page 236 and menu overview, see page 240.

External audio source audio volume

If an external audio source (e.g. an MP3 player or iPod ) is connected to the AUX input then

9 Only Premium Sound Multimedia. 10Only when Surround is activated. 11Not Performance.

06 Infotainment system

General information on infotainment

06

240

the audio source that is connected can have a different volume than the audio system's inter- nal volume (e.g. radio). Correct this by adjust- ing the volume of the input:

1. Press the MEDIA button and turn TUNE to AUX and wait a few seconds or press OK/

MENU.

2. Press OK/MENU and then turn TUNE to AUX input volume. Confirm with OK/

MENU.

3. Turn TUNE to adjust the volume for the AUX input.

NOTE

If the external audio source's volume is too high or too low, the quality of the sound may deteriorate. The audio quality may also be impaired if the player is charged while the infotainment system is in AUX mode. In which case, avoid charging the player via the 12 V socket.

Optimum sound reproduction

The audio system is pre-calibrated for opti- mum sound reproduction by means of digital signal processing.

This calibration takes into account loudspeak- ers, amplifiers, passenger compartment acoustics, listener position etc. for each com- bination of car model and audio system.

There is a also a dynamic calibration that takes into account the position of the volume control, radio reception and vehicle speed.

The controls explained in these operating instructions, e.g. Bass, Treble and Equalizer, are only intended for the user to be able to adapt the sound reproduction according to personal taste.

Menu overview

Menus RADIO

Main menu AM

AM menu

Show presets12

Scan

Audio settings13

Sound stage14

Equalizer15

Volume compensation

Reset all audio settings

Main menu FM1/FM2

FM menu

TP

Show radio text

Show presets12

Scan

News settings

12Only applies to High Performance Multimedia and Premium Sound Multimedia. 13The menu options for audio settings are the same for all audio sources. 14Only applies to Premium Sound Multimedia. 15Does not apply to Performance.

06 Infotainment system

General information on infotainment

06

* Option/accessory, for more information, see Introduction. 241

Advanced settings

REG

Alternative frequency

EON

Set TP favourite

PTY settings

Reset all FM settings

Audio settings16

Main menu DAB1*/DAB2*

DAB menu

Ensemble learn

PTY filtering

Turn off PTY filtering

Show radio text

Show presets12

Scan

Advanced settings

DAB linking

DAB band

Sub channels

Show PTY text

Reset all DAB settings

Audio settings16

Menus MEDIA

Main menu CD Audio

Disc menu

Random

Scan

Audio settings16

Main menu CD/DVD12 Data

Disc menu

Play/Pause

Stop

Random

Repeat folder

Change subtitles

Change audio track

Scan

Audio settings16

Main menu DVD12 Video

DVD Video Menu

DVD disc menu

Play/Pause/Continue

Stop

Subtitles

Audio tracks

Advanced settings

Angle

DivX VOD code

Audio settings16

Main menu iPod15

iPod menu

Random

Scan

Audio settings16

Main menu USB15

USB menu

Play/Pause

16For submenus, see "Main menu AM". 12Only applies to High Performance Multimedia and Premium Sound Multimedia. 15Does not apply to Performance.

06 Infotainment system

General information on infotainment

06

242 * Option/accessory, for more information, see Introduction.

Stop

Random

Repeat folder

Select USB device

Change subtitles

Change audio track

Scan

Audio settings16

Main menu Media Bluetooth15

Bluetooth menu

Random

Change device

Remove Bluetooth device

Scan

Bluetooth software version in car

Audio settings16

Main menu AUX

AUX menu

AUX input volume

Audio settings16

Main menu TV*

TV menu

Select country

Reorganise presets

Autostore

Scan

Audio settings16

Pop-up menu17 video and TV*

Press OK/MENU when a video file is being played back or TV* is being shown in order to access the pop-up menu.

Image settings

Source menu18

DVD disc menu19

DVD disc TOP menu19

Menus TEL

Main menu Bluetooth handsfree15

Phone menu

All calls

All calls

Missed calls

Answered calls

Dialled calls

Call duration

Phone book

Search

New contact

Speed dials

Receive vCard

Memory status

Clear phone book

Change phone

Remove Bluetooth device

16For submenus, see "Main menu AM". 15Does not apply to Performance. 17Only applies when playing back videos or displaying TV*. 18What is shown in the pop-up menu for the source menu depends on what is being played back or displayed, it can be e.g. CD/DVD data menu or USB menu. 19Only applies to DVD video discs.

06 Infotainment system

General information on infotainment

06

243

Phone settings

Discoverable

Sounds and volume

Download phone book

Bluetooth software version in car

Call options

Auto answer

Voicemail number

Disconnect phone

06 Infotainment system

Radio

06

244 * Option/accessory, for more information, see Introduction.

General

Centre console, controls for radio functions.

RADIO button for selecting the wavelength (AM, FM1, FM2, DAB1*, DAB2*).

Station presets (0-9)

Select the desired frequency/station or navigate in the radio menu by turning TUNE.

Confirm your selection or go to the radio menu by pressing OK/MENU.

Hold in the button for next/previous avail- able station. Short press for preset.

NOTE

If the car is equipped with a steering wheel keypad* and/or remote control* then in many cases these can be used instead of the buttons in the centre console. For a description of the steering wheel keypad, see page 234. For a description of the remote control, see page 278.

Menus

The menus inRADIO are controlled from the centre console and the steering wheel key- pad*. For general information on menu naviga- tion, see page 236 and menu overview, see page 240.

Radio AM/FM

Tuning

NOTE

The reception is dependent both on how good the signal strength and signal quality are. The transmission may be disturbed by various factors such as tall buildings or the transmitter being far away. Coverage level can also vary depending on where in the country you are located.

Automatic tuning

1. Press RADIO, turn TUNE until the desired wavelength (AM, FM1 etc.) is shown, press OK/MENU.

2. Hold in / in the centre console (or in the steering wheel keypad*). The radio searches for the next/previous available station.

Station list1

The radio automatically compiles a list of the strongest FM stations whose signals it is cur- rently receiving. This enables you to find a sta- tion when you drive into an area where you do not know the radio stations and their frequen- cies.

To go to the list and select a station:

1. Select the desired wavelength (FM1 or FM2).

2. Turn TUNE one step in either direction. This displays the list of all stations in the area. The currently tuned station is indi- cated with enlarged text in the list.

3. Turn TUNE again in either direction to select a station from the list.

4. Confirm your selection with OK/MENU.

1 Does not apply to Performance.

06 Infotainment system

Radio

06

245

NOTE

The list only shows the frequencies of stations that are currently being received, not a complete list of all radio frequencies on the selected wave- length.

If the signal from the currently received station is weak, this may prevent the radio from updating the station list. If this occurs, press the button (while the station list is shown in the dis- play screen) in order to change to man- ual tuning and set a frequency. If the station list is no longer shown, turn TUNE one step in either direction to show the list again, and press to switch.

The list disappears from the TV screen after a few seconds.

If the station list is no longer shown, turn TUNE one step in either direction and press the

button in the centre console to change to manual tuning (or to return from manual tun- ing to the function for "Station list").

Manual tuning

The preset from the factory is that the radio shows the station list of the strongest stations

in the area when you turn TUNE (see the sec- tion "Station list", page 244). When the station list is shown, press the button in the cen- tre console to change to manual tuning. This allows you to select a frequency from the list of all available radio frequencies in the selected wavelength. In other words, if turn TUNE one step in a manual search the frequency is changed from e.g. 93.3 to 93.4 MHz, etc.

To manually select a station:

1. Press the RADIO button, turn TUNE until the desired wavelength (AM, FM1 etc.) is shown, press OK/MENU.

2. Turn TUNE to select a frequency.

NOTE

The preset from the factory is that the radio automatically searches for the stations in the area where you are driving (see previous section "Station list" above).

But if you have changed over to manual tun- ing (by pressing the button in the cen- tre console when the station list was shown), then the radio remains set in the function for manual tuning the next time you switch on the radio. To change back to the function for "Station list", turn TUNE one step (to show the complete list of stations) and press the button .

Note that if you press when the sta- tion list is not shown then INFO is activated. For more information on this function, see page 233.

Preset

10 presets can be stored per wavelength (AM, FM1 etc.).

The stored presets are selected using the pre- set buttons.

1. Tune into a station (see "Tuning", page 244).

2. Hold in one of the preset buttons for a few seconds, the sound disappears during this

06 Infotainment system

Radio

06

246

time and returns when the station is stored. The preset button can now be used.

A list of pre-selected channels can be shown2

in the TV screen. The function is activated/ deactivated in FM/AM mode under FM menu

Show presets or AM menu Show

presets.

RDS functions

RDS (Radio Data System) links FM transmitters into a network. An FM transmitter in such a network sends information that gives an RDS radio the following functions:

Automatically switches to a stronger trans- mitter if reception in the area is poor.

Searches for programme type, such as traffic information or news.

Receives text information on current radio programme.

NOTE

Some radio stations do not use RDS or only some if its functionality.

If a required programme type is located the radio can switch stations interrupting the audio source currently in use. For example, if the CD

player is in use, it is paused. The interrupting transmission is played at a preset volume, see page 248. The radio returns to the previous audio source and volume when the set pro- gramme type is no longer broadcast.

The programme functions alarm (ALARM!), traffic information (TP), news (NEWS), and pro- gramme types (PTY) interrupt one another in order of priority, where alarm has the highest priority and programme types has the lowest. For additional settings of programming inter- ruptions (EON Distant and EON Local), see the section "Enhanced Other Networks EON" below. Press EXIT to return to the inter- rupted audio source, press the OK/MENU to clear the message.

Alarm

This function is used to warn of serious acci- dents and catastrophes. The alarm cannot be temporarily interrupted or deactivated. The message ALARM! appears on the TV screen when an alarm message is transmitted.

Traffic information TP

This function allows traffic information sent within a set station's RDS network to break through. The TP symbol indicates that the function is activated. If the preset station can

send traffic information then this is shown by TP glowing brightly in the TV screen, otherwise TP will be grey.

Activate/deactivate in FM mode under FM

menu TP.

Enhanced Other Networks EON

This function is useful in urban areas with many regional radio stations. It allows the distance between the car and the radio station trans- mitter to determine when programme functions should interrupt the current audio source.

Activate/deactivate in FM mode by select- ing one of the options under FM menu

Advanced settings EON:

Local interrupts only if the radio station transmitter is close.

Distant3 interrupts if the station trans- mitter is far away, even if there is a lot of static.

TP from selected station/all stations

The radio can only interrupt for traffic informa- tion from the selected station or all stations within the RDS network.

Go in FM mode to FM menu Advanced

settings Set TP favourite to change.

2 Only applies to High Performance Multimedia and Premium Sound Multimedia. 3 Factory settings.

06 Infotainment system

Radio

06

247

News

This function allows news broadcasts sent within a set station's RDS network to break through. The NEWS symbol indicates that the function is active.

Activate/deactivate in FM mode under FM

menu News settings News.

News from selected station/all stations

The radio can only interrupt for news from the selected station or all stations in the RDS net- work.

Go in FM mode to FM menu News

settings Set news favourite to change.

Programme types PTY

The PTY function can be used to select one or more programme types, such as pop music and serious classic. The PTY symbol indicates that the function is active. This function allows programme types broadcast within a set sta- tion's RDS network to break through.

1. Activate in FM mode by first selecting the programme types under FM menu

Advanced settings PTY settings

Select PTY.

2. Then the PTY function must be activated under FM menu Advanced settings

PTY settings Receive traffic

bulletins from other networks.

An indicator is shown in the TV screen when PTY is activated.

Deactivation of the PTY function is performed in FM mode under FM menu Advanced

settings PTY settings Receive traffic

bulletins from other networks. Selected pro- gramme types (PTY) are not reset.

Resetting and removing PTY are performed under FM menu Advanced settings

PTY settings Select PTY Clear all.

PTY search

This function searches the entire wavelength for the selected programme type.

1. In FM mode select one or more PTY under FM menu Advanced settings PTY

settings Select PTY.

2. Go to FM menu Advanced settings

PTY settings Seek PTY.

To finish searching, press EXIT.

To continue searching for another broad- cast of the selected programme types, press on or .

Display of programme type

The programme type of the current station can be shown on the TV screen.

Activate/deactivate in FM mode under FM

menu Advanced settings PTY

settings Show PTY text.

Radio text4

Some RDS stations transmit information on programme content, artists, etc. This informa- tion can be shown on the TV screen.

Activate/deactivate in FM mode under FM

menu Show radio text.

Automatic frequency update AF

The function selects the strongest transmitter for the set station. In order to find a strong transmitter the function may, in exceptional cases, need to search the entire FM wave- length.

Activate/deactivate in FM mode under FM

menu Advanced settings

Alternative frequency.

4 Only cars with 7-inch screen

06 Infotainment system

Radio

06

248 * Option/accessory, for more information, see Introduction.

Regional radio programmes REG

This function causes the radio to continue with a regional transmitter even if its signal strength is low. The symbol REG shows that the func- tion is active.

Activate/deactivate in FM mode under FM

menu Advanced settings REG.

Resetting RDS functions

All radio settings can be reset to the original factory settings.

The reset is carried out in FM mode under FM menu Advanced settings

Reset all FM settings.

Volume control, programme types

The interrupting programme types, e.g. NEWS or TP, are heard at the volume selected for each respective programme type. If the vol- ume level is adjusted during the programme interruption, the new level is saved until the next programme interruption.

Scan wavelength

The function automatically searches for avail- able channels and takes into account any pro- gramme type filtering. When a station is found, it is played for approx. 10 seconds before scanning is resumed. When a station is playing back it can be saved as a preset in the usual way, see the section Preset, page 245.

To start scanning go in FM/AM mode to FM menu Scan or AM menu Scan.

NOTE

Scanning stops if a station is saved.

Radio system - DAB*

General

DAB (Digital Audio Broadcasting) is a digital broadcasting system for radio. This system supports DAB, DAB+ and DMB.

NOTE

Coverage for DAB is not available in all loca- tions. If there is no coverage then the mes- sage No reception is shown in the display screen.

Service and Ensemble

Service - Channel, radio channel (only audio services are supported by the sys- tem).

Ensemble - A collection of radio channels on the same frequency.

Storing channel groups (Ensemble learn)

When the vehicle is moved to a new broad- casting area, programming of existing channel groups in the area may be necessary.

Programming of channel groups creates an updated list of all available channel groups. The list is not updated automatically.

Programming is carried out in the menu system in DAB mode under DAB menu Ensemble

learn. Programming can also take place as fol- lows:

1. Turn TUNE one step in either direction. > Ensemble learn is shown in the list of

available channel groups.

2. Press OK/MENU. > New programming is started.

Programming can be cancelled with EXIT.

Navigation in channel group list

(Ensemble)

To navigate in and access the channel group list turn TUNE. The name of the Ensemble is shown in the upper part of the TV screen. When switching to the new Ensemble the name changes to the new one.

Service - Shows channels irrespective of the channel group to which they are allo- cated. The list can also be filtered using the selection of programme type (PTY

filtering), see below.

06 Infotainment system

Radio

06

249

Scanning

The function automatically searches the cur- rent wavelength for strong stations. When a station is found, it is played for approx. 10 sec- onds before scanning is resumed. When a sta- tion is playing back it is saved as a preset in the usual way. For more information on presets, see "Preset" below.

Go in DAB mode to DAB menu Scan to start scanning.

NOTE

Scanning stops if a station is saved.

Scanning can also be selected in DAB-PTY mode. In which case only channels of the pre- selected programme type are played.

Programme type (PTY)

Various types of radio programmes can be selected using the programme type function. There are a number of different programme types which also include different programme categories. After selecting a programme type, navigation only takes place within the channels that are broadcasting that type.

Programme type is selected in DAB mode under DAB menu PTY filtering. Exit this mode as follows:

Press EXIT. > An indicator is shown in the TV screen

when PTY is activated.

In certain cases DAB radio will exit PTY mode when DAB to DAB linking (see below) is imple- mented.

Preset

10 station presets can be stored per wave- length. DAB has 2 memories for presets: DAB1 and DAB2. Storage of presets is made by means of a long press on the desired preset button, for more information see page 245. The stored presets are selected using the preset buttons.

A preset contains one channel but no sub- channels. If a subchannel is being played and a preset is saved then only the main channel is registered. This is because subchannels are temporary. At the next attempt to retrieve the preset, the channel which contained the sub- channel will be played. The preset is not dependent on the channel list.

A list of pre-selected channels can be shown5

in the TV screen. The function is activated/ deactivated in DAB mode under DAB menu

Show presets.

NOTE

The audio system's DAB system does not support all functions available in the DAB standard.

Radio text

Some radio stations transmit information on programme content, artists, etc. This informa- tion is shown on the TV screen.

The function is deactivated/activated in DAB mode under DAB menu Show radio text.

NOTE

Only one of the functions "Show radio text" and "Show presets" can be acti- vated at a time. If one of them is activated when the other is already activated, then the previously activated function is deactivated automatically. Both functions can be deac- tivated.

5 Only applies to High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

Radio

06

250

Advanced settings

DAB to DAB link

DAB to DAB linking means that the DAB radio can go from one channel with poor or no recep- tion to the same channel in another channel group with better reception. There may be a certain delay when changing channel group. There may be a period of silence between the current channel no longer being available to the new channel becoming available.

The function can be activated/deactivated in DAB mode under DAB menu Advanced

settings DAB linking.

Wavelength

DAB can be transmitted on two6 wavelengths:

Band III - covers most areas.

LBand - available only in a few areas.

By selecting for example Band III on its own, channel programming takes place more quickly than if both Band III and LBand have been selected. It is not certain that all channel groups will be found. Wavelength selection does not affect the stored memories.

Wavelengths can be deactivated/activated in DAB mode under DAB menu Advanced

settings DAB band.

Subchannel

Secondary components are usually named subchannels. These are temporary and can contain e.g. translations of the main pro- gramme into other languages.

If one or more subchannels are broadcast then the symbol is shown to the left of the chan- nel name in the TV screen. A subchannel is indicated by the - symbol appearing to the left of the channel name in the TV screen.

Press to access the subchannels.

Subchannels can only be accessed on the selected main channel and not on any other channel without selecting it.

Display of subchannels can be deactivated/ activated in DAB mode under DAB menu

Advanced settings Sub channels

Programme type text

Some radio stations broadcast information about programme type and programme cate- gory, for information on Programme types PTY, see page 247. This information is shown on the TV screen.

The function is activated/deactivated in DAB mode under DAB menu Advanced

settings Show PTY text.

Resetting the DAB settings

All DAB settings can be reset to the original factory settings.

The reset is carried out in DAB mode under DAB menu Advanced settings

Reset all DAB settings.

6 Not all areas/countries use both wavelengths.

06 Infotainment system

Media player

06

* Option/accessory, for more information, see Introduction. 251

CD/DVD1 functions

Centre console control panel.

Disc insert and eject slot

MEDIA button, activates last active media source. If you are already in a media source and press the MEDIA button then a short- cut menu is shown for commonly used menu options.

Disc eject

Input of numbers and letters.

Select the disc tracks/folders, or navigate through menu options by turning TUNE.

Confirm your selection or go to the menu for the selected media source by pressing OK/MENU.

Fast forward/reverse and change disc track or chapter2.

The media player supports and can play the following main types of discs and files:

Pre-recorded CD discs (CD Audio).

Burned CD discs with audio and/or video files1.

Pre-recorded DVD video discs1.

Burned DVD discs1 with audio and/or video files.

For more information about the supported for- mats, see page 254.

NOTE

If the car is equipped with a steering wheel keypad* and/or remote control* then in many cases these can be used instead of the buttons in the centre console. For a description of the steering wheel keypad, see page 234. For a description of the remote control, see page 278.

Menus

The menus inMEDIA are controlled from the centre console and the steering wheel key- pad*. For general information on menu naviga- tion, see page 236 and menu overview, see page 240.

Starting playback of a disc

Press the MEDIA button, turn TUNE until Disc is shown, press OK/MENU. If there is a disc in the media player then the disc starts playing back automatically, otherwise Insert

disc is shown in the TV screen. Then insert a disc, with text side up. The disc starts to play back automatically.

If a disc with audio/video files is inserted into the player then the disc's folder structure needs to be loaded. Depending on the quality of the disc and the quantity of information there may be a certain delay before playback starts.

Disc eject

A disc remains in the ejected position for about 12 seconds, after which it is inserted back into the player for safety reasons.

Pause

When the volume is reduced entirely or MUTE is pressed, the media player is paused. When the volume is increased or MUTE is pressed

1 Only applies to High Performance Multimedia and Premium Sound Multimedia. 2 Only applies to DVD discs.

06 Infotainment system

Media player

06

252 * Option/accessory, for more information, see Introduction.

again, the media player starts. It is also possi- ble to pause via the menu system3, press OK/

MENU, select Play/Pause.

Playback and navigation

CD audio discs

Turn TUNE to access the disc's playlist and navigate in the list. Use OK/MENU to confirm the selection of the disc track and start play- back. Press EXIT to cancel and exit the playlist. A long press on EXIT leads to the playlist's root level.

Disc tracks can also be changed by pressing on / on the centre console or the steering wheel keypad*.

Burned discs audio/video files1

Turn TUNE to access the disc's playlist/folder structure and navigate in the list/structure. Use OK/MENU to confirm either selection of sub- folder or start of playback of the selected audio/video file. Press EXIT to either stop and exit the playlist or go up (back) in the folder structure. A long press on EXIT leads to the playlist's root level.

Audio/video files can also be changed by pressing / on the centre console or the steering wheel keypad*.

Audio files have the symbol , video files1

have the symbol and folders have the symbol .

When playback of a file is complete the play- back of the other files (of the same type) in that particular folder continues. Change4 of folder takes place automatically when all the files in the current folder have been played back. The system automatically detects and changes setting when a disc containing only audio files or only video files is loaded into the media player and then plays back these files. How- ever, the system does not change setting if a disc containing a mixture of audio and video files is loaded into the media player, but instead the player continues to play back the previous file type.

NOTE

A video film is only shown when the car is stationary. When the car is moving at a speed of over about 8 km/h no picture is shown and No visual media available while driving appears on the display screen, although the audio is heard during this time. The picture is shown again as soon as the car's speed falls below about 6 km/h.

NOTE

Some audio files that are copy-protected by record companies or privately copied audio files cannot be loaded by the player.

DVD video discs1

For playback of DVD video discs, see page 253.

Fast forward/reverse

Hold in the buttons / to fast forward/ rewind. Audio files are fast forwarded/rewound at one speed, while video files are fast forwar- ded/rewound at several speeds. Repeatedly press the buttons / to increase the fast

3 Does not apply to CD Audio 1 Only applies to High Performance Multimedia and Premium Sound Multimedia. 4 If Repeat folder is activated then this does not take place.

06 Infotainment system

Media player

06

* Option/accessory, for more information, see Introduction. 253

forward/rewind speed for video files. Release the button to return to viewing at normal speed.

Scan5

This function plays the first ten seconds of each disc track/audio file. To scan:

1. Press OK/MENU

2. Turn TUNE to Scan

> The first 10 seconds of each disc track or audio file are played.

3. Cancel the scan with EXIT, the disc track or audio file being played back will con- tinue playing.

Random5

This function plays the tracks in random order. To listen to the tracks in random order:

1. Press OK/MENU

2. Turn TUNE to Random

3. Press OK/MENU to activate/deactivate the function.

Disc tracks/audio files can be changed by pressing / on the centre console or the steering wheel keypad*.

Repeat folder6

This function makes it possible to play files in a folder over and over again. When the last file has been played out, playback of the first file starts again.

1. Press OK/MENU

2. Turn TUNE to Repeat folder

3. Press OK/MENU to activate/deactivate the function.

Playback of DVD video discs1

Playback

When playing back a DVD video disc a disc menu may appear on the display screen. The disc menu gives access to additional functions and settings, such as selecting subtitles, lan- guage and scene selection.

NOTE

A video film is only shown when the car is stationary. When the car is moving at a speed of over about 8 km/h no picture is shown and No visual media available while driving appears on the display screen, although the audio is heard during this time. The picture is shown again as soon as the car's speed falls below about 6 km/h.

Navigation in the DVD video disc's menu

Navigation in the DVD video disc's menu is performed using the number keys in the centre console as illustrated above.

5 Does not apply to DVD video discs. 6 Only applies to audio/video files on burned discs or USB. 1 Only applies to High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

Media player

06

254 * Option/accessory, for more information, see Introduction.

Changing chapter or title

Turn TUNE to access the list of chapters and navigate through them (if the film is being played back then it is paused). Press OK/

MENU to select the chapter, this also leads back to the original position (if the film was being played back then it is restarted). Press EXIT to access the title list.

Titles are selected in the title list by turning TUNE and the selection is confirmed with OK/

MENU, this also leads back to the chapter list. Press OK/MENU to activate the selection and return to the start position. Use EXIT to cancel the selection and this leads back to the original position (without any selection being made).

The chapter can also be changed by pressing on / on the centre console or the steering wheel keypad*.

Advanced settings7

Angle

If the DVD video disc supports it, the function can be used to choose from which camera position a particular scene should be shown. Go in disc mode to Disc menu Advanced

settings Angle.

DivX Video On Demand

The media player can be registered in order to play DivX VOD type files from burned discs or USB. The code for registration can be found in the menu system MY CAR Settings

Information DivX VOD code. For general information on menus, see under MY CAR, see page 200.

For more information visit www.divx.com/vod.

Picture settings7

You can adjust the settings (when the car is stationary) for brightness and contrast.

1. Press OK/MENU and select Image

settings, confirm with OK/MENU.

2. Turn TUNE to the adjustment option and confirm with OK/MENU.

3. Adjust the setting by turning TUNE and confirm with OK/MENU.

To return to the settings list, press the OK/

MENU or EXIT.

The picture settings can be reset to factory settings with the Reset option.

Compatible file formats

The media player can play back a variety of file types and is compatible with the formats in the following table.

NOTE

Dual format, double-sided discs (DVD Plus, CD-DVD format) are thicker than regular CD discs and therefore playback cannot be guaranteed and malfunction may arise.

If a CD contains a mixture of MP3 and CDDA tracks, all MP3s will be ignored.

Audio formatA CD audio, mp3, wma

Audio formatB CD audio, mp3, wma, aac, m4a

Video formatC CD video, DVD video, divx, avi, asf

A Applies to Performance. B Does not apply to Performance. C Only applies to High Performance Multimedia and Premium

Sound Multimedia.

7 Applies to High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

External audio source via AUX/USB* input

06

* Option/accessory, for more information, see Introduction. 255

General

Connection points for external audio sources.

An external audio source, e.g. an iPod or MP3 player, can be connected to the audio system via any of the connections in the centre con- sole. An audio source connected to the USB input can then be handled1 with the car's audio controls. A device connected via the AUX input cannot be controlled via the car.

NOTE

If the car is equipped with a steering wheel keypad* and/or remote control* then in many cases these can be used instead of the buttons in the centre console. For a description of the steering wheel keypad, see page 234. For a description of the remote control, see page 278.

An iPod or MP3 player with rechargeable bat- teries is recharged (when the ignition is on or the engine is running) if the device is plugged into the USB connection.

To connect the audio source:

1. Press MEDIA, turn TUNE to the desired audio source USB, iPod or AUX, press OK/MENU. > If USB is selected then Connect USB is

shown in the TV screen.

2. Connect your audio source to one of the connections in the centre console's stor- age compartment (see previous illustra- tion).

The text Reading USB is shown in the TV screen when the system is loading the storage media's file structure. Depending on the file

structure and number of files there may be some delay before loading is finished.

NOTE

The system supports most iPod models produced in 2005 or later.

NOTE

To prevent damage to the USB connection, this is shut off if the USB connection is short-circuited or if a connected USB unit is taking too much power (this may happen if the unit connected does not meet the USB standard). The USB connection is reactiva- ted automatically the next time the ignition is turned on, unless the fault persists.

Menus

The menus inMEDIA are controlled from the centre console and the steering wheel key- pad*. For general information on menu naviga- tion, see page 236 and menu overview, see page 240.

1 Only applies to the media source connected via the USB connection.

06 Infotainment system

External audio source via AUX/USB* input

06

256 * Option/accessory, for more information, see Introduction.

Playback and navigation2

Turn TUNE to access the playlist/folder struc- ture and navigate in the list/structure. Use OK/

MENU to either confirm selection of subfolder or start of playback of the selected audio/video file. Press EXIT to either stop and exit the play- list or go up (back) in the folder structure. A long press on EXIT leads to the playlist's root level.

Audio/video files can also be changed by pressing / on the centre console or the steering wheel keypad*.

Audio files have the symbol , video files3

have the symbol and folders have the symbol .

When playback of a file is complete the play- back of the other files (of the same type) in that particular folder continues. Change4 of folder takes place automatically when all the files in the current folder have been played back. The system automatically detects and changes setting when a device containing only audio files or only video files is connected to the USB port and then it plays back these files. How- ever, the system does not change setting if a

device containing a mixture of audio and video files is connected to the USB port, but instead the player continues to play back the previous file type.

Fast forward/reverse2

See page 252.

Scan2

See page 253.

Random2

See page 253.

Search function2

The keypad on the control panel in the centre console can be used to find a filename in the current folder.

The search function is accessed either by turn- ing TUNE (to access the folder structure) or by pressing one of the letter keys. As a letter or character in a search string is entered you get closer to your search target.

Start playback of a file by pressing OK/

MENU.

Repeat folder5

See page 253.

Pause

When the volume is reduced entirely or MUTE is pressed, the media player is paused. When the volume is increased or MUTE is pressed again, the media player starts. It is also possi- ble to pause via the menu system6, press OK/

MENU, select Play/Pause.

Audio sources

USB memory

To facilitate the use of a USB memory stick, only store music files on it. It takes a lot longer for the system to load storage media that con- tains anything other than compatible music files.

2 Only applies to USB and iPod . 3 Applies to High Performance Multimedia and Premium Sound Multimedia. 4 If Repeat folder is activated then this does not take place. 5 Only applies to USB. 6 Does not apply to iPod

06 Infotainment system

External audio source via AUX/USB* input

06

* Option/accessory, for more information, see Introduction. 257

NOTE

The system supports mobile media compli- ant with USB 2.0 and the FAT32 file system and can handle 1000 folders with a maxi- mum of 254 subfolders/files in every folder. The top level, which can handle up to 1000 subfolders/files, is an exception to this.

NOTE

When using a longer model USB memory stick the use of a USB adapter cable is rec- ommended. This is to avoid mechanical wear to the USB input and the connected USB memory stick.

USB hub

It is possible to connect a USB hub to the USB connection and thereby connect multiple USB devices simultaneously. Selection of USB device is made in USB mode under USB menu

Select USB device.

MP3 player

Many MP3 players have their own file systems that are not supported by the audio system. For use in the system, an MP3 player must be set in USB Removable device/Mass Storage

Device mode.

iPod

An iPod is charged and supplied with power by the USB connection* via the player's con- nection cable.

NOTE

The system only supports the playback of audio files from iPod .

NOTE

When an iPod is used as audio source, the car's infotainment system has a menu structure that is similar to the iPod player's own menu structure.

Compatible file formats via the USB connection

Audio and video files in the following table are supported by the system for playback via the USB connection.

Audio format mp3, wma, aac, m4a

Video formatA divx, avi, asf

A Only applies to High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

Media Bluetooth *

06

258 * Option/accessory, for more information, see Introduction.

General

The car's media player is equipped with Bluetooth 1 and can wirelessly play streaming audio files from external devices with Bluetooth , such as mobile phones and PDAs. Navigation and control of the sound can be carried out via the centre console buttons or via the steering wheel keypad*. In some external devices it is also possible to change tracks from the device.

To play back the audio the car's media player must first be set in Bluetooth mode.

NOTE

The Bluetooth media player must support the Audio/Video Remote Control Profile (AVRCP) and Advanced Audio Distribution Profile (A2DP). The player should use AVRCP version 1.3, A2DP 1.2. Otherwise some functions may not work.

Not all mobile phones and external media players available in the market are fully com- patible with the Bluetooth function in the car's media player. Volvo recommends that you contact an authorised Volvo dealer or visit www.volvocars.com for information on compatible phones and external media players.

NOTE

The car's media player can only play the audio files via the Bluetooth function.

Menus

The menus in MEDIA are controlled from the centre console and the steering wheel key- pad*. For general information on menu naviga- tion, see page 236 and menu overview, see page 240.

Overview

Centre console control panel.

VOL volume

MEDIA button. Last active source (e.g. iPod ) is activated automatically. If a

source is activated and you press MEDIA

then a shortcut menu is shown with com- monly used menu options.

Navigate in the menu by turning TUNE.

Confirm your selection or go to the menu by pressing OK/MENU.

EXIT - leads up in the menu system, stops the function in progress.

Short presses are used to scroll between audio files. Long presses are used to fast forward and rewind audio files.

NOTE

If the car is equipped with a steering wheel keypad* and/or remote control* then in many cases these can be used instead of the buttons in the centre console. For a description of the steering wheel keypad, see page 234. For a description of the remote control, see page 278.

1 Applies to High Performance, High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

Media Bluetooth *

06

* Option/accessory, for more information, see Introduction. 259

Getting started

Connect an external Bluetooth device

A maximum of ten external devices can be reg- istered. The connection is made in the same way as for the phone, see Connect an external Bluetooth device, page 262.

Automatic connection

When the Bluetooth function is active and the last external device connected is in range it is connected automatically. When the infotain- ment system searches for the last device con- nected its name is shown in the TV screen. To connect to another device, press EXIT. Con- nect a new external device, see "Change to another external device" below.

Change to another external device

It is possible to change a connected device with another device if there are several devices in the car. However, the device must first have been paired, see "Connect an external Blue- tooth device" above. To change to another device:

1. Press MEDIA, turn TUNE until Bluetooth

is shown, press OK/MENU.

2. Check that the external device is searcha- ble/visible via Bluetooth , see the manual for the external device.

3. Press OK/MENU.

4. Turn TUNE to Change device, and con- firm with OK/MENU. > After a while, the external device's name

is shown in the TV screen. If several external devices have been paired then these are also shown.

5. Select the device to be connected by turn- ing TUNE and confirm with OK/MENU. > Connection of the external device takes

place.

Change audio file by pressing / on the centre console or the steering wheel keypad*.

Disconnecting the device

Automatic disconnection takes place if the external device moves out of the infotainment system's range. For more information on con- nection, see page 259.

Remove the connected device

1. Press Bluetooth mode on OK/MENU.

2. Turn TUNE to Remove Bluetooth

device and confirm with OK/MENU.

3. Select the device to be removed by turning TUNE, and confirm with OK/MENU. > A prompt asking whether or not you

want to remove the connection is shown in the TV screen.

4. Press OK/MENU to confirm.

EXIT cancels.

Random2

This function plays back the audio files on the external device in random order. Activate/ deactivate the random function in Bluetooth mode under Bluetooth menu Random.

Change audio file by pressing / on the centre console or the steering wheel keypad*.

Scanning of audio files in external

device2

This function play backs the first ten seconds of each audio file. Activate/deactivate the func- tion in Bluetooth mode under Bluetooth menu

Scan.

Cancel scanning with EXIT.

2 Not supported by all mobile phones.

06 Infotainment system

Media Bluetooth *

06

260 * Option/accessory, for more information, see Introduction.

Version information Bluetooth

The car's current Bluetooth version can be seen in Bluetooth mode under Bluetooth

menu Bluetooth software version in car.

06 Infotainment system

Bluetooth handsfree*

06

* Option/accessory, for more information, see Introduction. 261

General

A mobile phone equipped with Bluetooth can be connected wirelessly to the Infotainment system1. The infotainment system then works handsfree, with the option to control a range of the mobile phone's functions remotely. The microphone used is located by the driver's sun visor (2). The mobile phone can be operated by its own keys irrespective of whether or not it is connected.

NOTE

Only a selection of mobile phones are fully compatible with the handsfree function. Volvo recommends that you seek assis- tance from an authorised Volvo dealer or visit www.volvocars.com for information on compatible phones.

Menus

The menus in TEL are controlled from the cen- tre console and the steering wheel keypad*. For general information on menu navigation, see page 236 and menu overview, see page 240.

Overview

System overview

Mobile phone

Microphone

Steering wheel keypad

Centre console control panel

Phone functions, controls overview

Centre console control panel.

Number and letter buttons

TEL button activates/searches last con- nected phone. If a phone is already con- nected, and TEL is pressed, a shortcut menu is shown with commonly used menu options for the phone.

TUNE - Turn in normal view to the right to access the phone book, and to the left for the call register for all calls; also used for navigation among the options on the TV screen.

1 Applies to High Performance, High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

Bluetooth handsfree*

06

262 * Option/accessory, for more information, see Introduction.

Accept incoming calls, confirm your selec- tion or go to the Phone menu by pressing OK/MENU.

EXIT - Cancels/rejects phone calls, deletes input characters, leads up in the menu sys- tem and cancels the current function.

NOTE

If the car is equipped with a steering wheel keypad* and/or remote control* then in many cases these can be used instead of the buttons in the centre console. For a description of the steering wheel keypad, see page 234. For a description of the remote control, see page 278.

Remember

Activate

A short press on TEL activates/searches last connected phone. If a phone is already con- nected, and TEL is pressed, a shortcut menu is shown with commonly used menu options for the phone. The symbol indicates that a phone is connected.

Connect an external Bluetooth device

A maximum of ten external devices can be reg- istered. Registration is performed once per device. After registration the device no longer needs to be activated as visible/searchable.

It is possible to have two Bluetooth devices connected simultaneously. One phone and one media device, which it is possible to switch between, see page 263 or see page 259. It is also possible to use the phone while streaming audio files from a connected device.

Connecting an external device takes place in different ways depending on whether or not the device has been connected previously.

To connect a device for the first time, follow the connection alternatives below.

There are two possible ways of connecting devices, either search for the external device from the car, or search for the car from the external device. If one option does not work then try with the other.

Alternative 1 - search for the external device via the car's menu system

1. Make the external device searchable/visi- ble via Bluetooth , see the external devi- ce's manual or www.volvocars.com.

2. Press TEL. > The car searches for previously con-

nected devices.

3. Activate Bluetooth in the car. Press OK/

MENU, select Add phone or Change

phone if another phone is already con- nected.

If one or more devices have already been connected then these are also shown. Select the device you want to connect and press OK/MENU. > The menu option is shown on the TV

screen.

4. Check that the external device's Bluetooth function is switched on and press OK/MENU. > The car searches for external devices in

the vicinity. The search takes approxi- mately 30 seconds. The external devi- ces detected are specified with their respective Bluetooth name in the TV screen. The handsfree function's Bluetooth name is shown in the exter- nal device as My Volvo Car.

5. Turn TUNE to select one of the external devices shown on the car's TV screen and confirm with OK/MENU.

6. Enter the series of numbers (PIN code) that is shown on the car's TV screen via the mobile phone's keypad and press the mobile phone's button to confirm the selection.

The external device is now connected to the car and can be controlled from the car.

06 Infotainment system

Bluetooth handsfree*

06

* Option/accessory, for more information, see Introduction. 263

If connecting the phone is not successful: Press EXIT and connect in accordance with Alternative 2.

If connecting the media device is not success- ful: Connect in accordance with Alternative 2.

Alternative 2 - search for the car via the exter- nal device

1. Press TEL.

If an external device is already connected, disconnect it. > The car searches for previously con-

nected devices.

2. Make the car searchable/visible via Bluetooth . Press OK/MENU, select Phone settings Discoverable.

3. Search for the car with the external devi- ce's Bluetooth function, see the manual for the external device.

4. Select My Volvo Car in the list of devices detected in your external device.

5. Enter a PIN code of your choice in the external device via the external device's keypad when prompted for a PIN. Then enter the same PIN code via the car's key- pad.

6. Choose to connect to My Volvo Car from the external device.

When the connection is established, the exter- nal device's Bluetooth name is shown in the car's TV screen. Now the external device can be controlled from the car.

Automatic connection

When the handsfree function is active and the last mobile phone connected is in range it is connected automatically. If the last connected mobile phone is not available then the system will try to connect a mobile phone that was paired earlier. When the audio system searches for the last phone connected its name is shown in the TV screen.

Manual connection

If you want to change the connected mobile phone, go in phone mode to Phone menu

Change phone.

Change to another external device

It is possible to change a connected device with another device if there are several devices in the car. However, the device must first have been registered to the car, see Connect an external Bluetooth device. To change to another device:

1. Check that the external device is searcha- ble/visible via Bluetooth , see the manual for the external device.

2. Press TEL and then select Change

phone. > The car searches for previously con-

nected devices. The external devices detected are specified with their respec- tive Bluetooth name in the TV screen.

3. Select the device to be connected by turn- ing TUNE and confirm with OK/MENU. > Connection of the external device takes

place.

To call

1. Make sure that the symbol appears at the top of the TV screen and that the handsfree function is in phone mode.

2. Dial either the desired number or speed dial number, see page 268. Or in normal view turn TUNE to the right to access the phone book, and to the left for the call reg- ister for all calls. For information on the phone book, see page 265.

3. Press OK/MENU.

The call is interrupted with EXIT.

Disconnecting the mobile phone

Automatic disconnection takes place if the mobile phone moves out of the audio system's range. The connection to the mobile phone can be manually broken in phone mode under

06 Infotainment system

Bluetooth handsfree*

06

264 * Option/accessory, for more information, see Introduction.

Phone menu Disconnect phone. For more information on connection, see page 262.

The handsfree function is deactivated when the engine is switched off and the door is opened2.

When the mobile phone has been discon- nected an ongoing call can be continued by using the mobile phone's built-in microphone and speaker.

NOTE

Even when your mobile phone has been manually disconnected, some mobile phones may automatically couple up to the last handsfree unit connected, e.g. when a new call begins.

Remove the device

A connected mobile phone can be deregis- tered and removed. This is performed in phone mode under Phone menu Remove

Bluetooth device.

Making and receiving calls

Incoming call

Press OK/MENU to answer the call, even if the audio system is in e.g. RADIO or MEDIA mode.

Refuse or end with EXIT.

Automatic answer

The automatic answer function means that calls are accepted automatically.

Activate/deactivate in phone mode under Phone menu Call options Auto

answer.

In call menu

Press OK/MENU during an ongoing call to access the following functions:

Mute - audio system microphone is muted.

Mobile phone - the call is transferred from handsfree to the mobile phone. For some mobile phones the connection is interrup- ted. This is normal. The handsfree function asks if you want to reconnect.

Dial number - option to call a third party using the number keys (current call set in standby).

Call lists

The call lists are copied to the handsfree func- tion at each new connection and are then updated during the connection. In normal view, turn to the left with TUNE to see the call register for All calls .

In phone mode it is possible to see all the call lists under Phone menu All calls:

All calls

Missed calls

Answered calls

Dialled calls

Call duration

NOTE

Certain mobile phones show a list of the last dialled numbers in reverse order.

Voice mailbox

In normal view a speed dial number for the voice mailbox can be programmed in and then accessed later via a long press on 1.

Voice mailbox number is changed in phone mode under Phone menu Call options

Voicemail number Change number. If

2 Only Keyless Drive.

06 Infotainment system

Bluetooth handsfree*

06

* Option/accessory, for more information, see Introduction. 265

there is no number stored then this menu can be reached with one long press on 1.

Audio settings

Phone call volume

The phone call volume can only be changed during a call. Use the steering wheel keypad* or turn the VOL control.

Audio system volume

Providing there is no ongoing call taking place, the audio system volume is controlled as usual by turning VOL.

If an audio source is active during an incoming call then it can be muted automatically. Acti- vate/deactivate in phone mode under Phone

menu Phone settings Sounds and

volume Mute radio/media.

Ring volume

In phone mode go to Phone menu Phone

settings Sounds and volume Ring

volume and adjust by turning VOL. Press OK/

MENU to hear the audio volume. Press EXIT

to save.

Ring signals

The handsfree function has integrated ring sig- nals that can be selected in phone mode under Phone menu Phone settings Sounds

and volume Ring signals Ring signal 1

etc.

NOTE

For some mobile phones, the ringtone on the phone connected will not be switched off when one of the inbuilt signals for the handsfree system is used.

In order to select the connected phone's ring signal3, go in phone mode to Phone menu

Phone settings Sounds and volume

Ring signals Mobile phone ring signal.

Phone book

There are two phone books. These are merged into one in the car and are displayed as a single phone book in the car.

The car downloads the mobile phone's phone book and only displays this phone book when the mobile phone from which

this phone book was downloaded is con- nected.

The car also has a built-in phone book. This contains all the contacts stored in the car irrespective of which phone was con- nected when saving them. These contacts are visible for all users, regardless of the mobile phone that is connected to the car. If a contact is saved in the car then the symbol is shown in front of the con- tact in the phone book.

NOTE

Changes made from the car to a record in the mobile phone's telephone book will result in a new record in the car's telephone book, i.e. changes will not be saved to the phone. From the car, this will now look like you have double records, with different icons. Note also that when a shortcut num- ber is saved or a change to a contact is made, this will result in a new record in the car's phone book.

All use of the phone book requires that the symbol appears at the top of the TV

screen and that the handsfree function is in phone mode.

3 Not supported by all mobile phones.

06 Infotainment system

Bluetooth handsfree*

06

266 * Option/accessory, for more information, see Introduction.

The audio system stores a copy of the phone book from each paired mobile phone. The phone book can be copied automatically to the audio system during each connection.

Activate/deactivate the function in phone mode under Phone menu Phone

settings Download phone book.

If the phone book contains a ringing caller's contact information then this is shown in the TV screen.

Quick search for contacts

In normal view turn TUNE to the right to obtain a list of contacts. Turn TUNE to select and press OK/MENU to call.

Under the name of the contact is the phone number that is selected by default. If the sym- bol appears to the right of the contact then there are several phone numbers stored for the contact. Press OK/MENU to show the num- bers. Change and dial a number other than that selected by default by turning TUNE. Press OK/MENU to dial.

Search in the list of contacts by using the cen- tre console's keypad to key in the start of the contact's name (see "Character table keypad in centre console" for button functions).

The list of contacts can also be accessed from normal view by pressing and holding the button on the centre console's keypad with the letter

that the contact searched for starts with. For example, a long press on the button for 6 gives instant access to that part of the list where the contacts with the letter M are located.

Character table keypad in centre

console

Key Function

Space . , - ? @ : ; / ( ) 1

A B C 2

D E F 3

G H I 4

J K L 5

M N O 6

P Q R S 7

T U V 8

W X Y Z 9

Shift between upper and lower case letter.

Key Function

+ 0 p w

# *

Searching for contacts

Search contacts using the text wheel.

Character list

Changing the input mode (see table below)

Phone book

To search for or edit a contact, go in phone mode to Phone menu Phone book

Search.

06 Infotainment system

Bluetooth handsfree*

06

* Option/accessory, for more information, see Introduction. 267

NOTE

There is no text wheel for High Performance, so TUNE cannot be used there to input characters: only the digit and letter buttons on the control panel in the centre console can be used for this.

1. Turn4 TUNE to the desired letter, press OK/MENU to confirm. The number and letter buttons on the control panel in the centre console can also be used.

2. Continue with the next letter and so on. The result of the search is shown in the phone book (3).

3. To change the input mode to numbers or special characters, or to go to the phone book, turn TUNE to one of the options (see explanation in the table below) in the list for changing the input mode (2), press OK/

MENU.

123/ ABC

Change between letters and numbers with OK/MENU.

More Change to special characters with OK/MENU.

Leads to the phone book (3). Turn TUNE to select a contact, press OK/MENU to see the saved numbers and other infor- mation.

A short press on EXIT deletes an input char- acter. A long press on EXIT will clear all entered characters.

By pressing a number key in the centre console when the text wheel is shown (see illustration above), a new character list (1) appears in the TV screen. Continue repeatedly pressing the number key to the desired letter and then release. Continue with the next letter and so on. When a button is depressed the entry is confirmed when another button is depressed.

To enter a number, hold in the corresponding number key.

New contact

Entering letters for New contact.

Changing the input mode (see table below)

Input field

New contacts can be added in phone mode under Phone menu Phone book New

contact.

NOTE

There is no text wheel for High Performance, so TUNE cannot be used there to input characters: only the digit and letter buttons on the control panel in the centre console can be used for this.

4 Only applies to High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

Bluetooth handsfree*

06

268 * Option/accessory, for more information, see Introduction.

1. When the Name row is selected, press OK/MENU to reach the input mode (illus- tration above).

2. Turn4 TUNE to the desired letter, press OK/MENU to confirm. The number and letter buttons on the control panel in the centre console can also be used.

3. Continue with the next letter and so on. The name entered is shown in the input field (2) in the TV screen.

4. To change the input mode to numbers, special characters, change between uppercase/lowercase letters, etc., turn TUNE to one of the options (see explana- tion in the table below) in the list (1) and then press OK/MENU.

When the name has been fully entered, select OK in the list on the TV screen (1) and press OK/MENU. Now continue with the telephone number in the same way as above.

When the telephone number has been entered, press OK/MENU and select a telephone num- ber type (Mobile phone, Home, Work or General). Press OK/MENU to confirm.

When all details have been filled in, select Save

contact in the menu to save the contact.

123/ ABC

Change between letters and numbers with OK/MENU.

More Change to special characters with OK/MENU.

OK Save and go back to Add con-

tact with OK/MENU.

Change between uppercase and lowercase letters with OK/

MENU.

Press OK/MENU, the cursor moves to the input field (2) at the top of the TV screen. The cursor can now be moved, with TUNE, to the appropriate place to e.g. insert new letters or delete with EXIT. To be able to insert new letters first go back to the input mode, by pressing OK/MENU.

Speed dial numbers

Use phone mode to add speed dial numbers under Phone menu Phone book Speed

dial.

Dialling with speed dial numbers can be per- formed in phone mode using the number keys on the keypad in the centre console, by press-

ing a number key and then pressing OK/

MENU. If there is no contact stored on the speed dial number then an option is shown to save a contact to the selected speed dial num- ber.

Receiving a vCard

It is possible to receive a vCard to the car's phone book from other mobile phones (other than the one currently connected to the car). In order to allow this the car is set to visible mode for Bluetooth . The function is activated in phone mode under Phone menu Phone

book Receive vCard.

Memory status

Memory status of the car's phone book and the connected mobile phone's phone book can be seen in phone mode under Phone menu

Phone book Memory status.

Delete phone book

The car's phone book can be deleted, this is carried out in phone mode under Phone menu

Phone book Clear phone book.

4 Only applies to High Performance Multimedia and Premium Sound Multimedia.

06 Infotainment system

Bluetooth handsfree*

06

* Option/accessory, for more information, see Introduction. 269

NOTE

Deleting the car's telephone book only dele- tes contacts in the car's telephone book. Contacts in the mobile phone's phone book are not deleted.

Version information Bluetooth

The car's current Bluetooth version can be seen in phone mode under Phone menu

Phone settings Bluetooth software

version in car.

06 Infotainment system

Voice recognition* mobile phone

06

270 * Option/accessory, for more information, see Introduction.

General

The infotainment system's voice recognition1

allows the driver to voice-activate certain func- tions in a Bluetooth -connected mobile phone or in Volvo's navigation system - RTI (Road and Traffic Information System).

NOTE

The information in this section describes the use of voice commands to control a mobile phone connected

using Bluetooth . For detailed infor- mation on using a mobile phone con- nected using Bluetooth with the car's Infotainment system see page 261.

The Volvo navigation system RTI (Road and Traffic Information System) has a separate user manual which contains more information on voice control and voice commands to control that sys- tem.

Voice commands offer convenience and help the driver to avoid being distracted, and instead concentrate on driving and focus attention on the road and traffic conditions.

WARNING

The driver always holds overall responsibil- ity for driving the vehicle in a safe manner and complying with all applicable rules of the road.

The voice recognition system allows the driver to voice-activate certain functions of a Bluetooth -connected mobile phone and in Volvo's navigation system - RTI (Road and Traffic Information System), while the driver can keep his/her hands on the wheel at the same time. The input data are in dialogue form with spoken commands from the user and ver- bal replies from the system. The voice recog- nition system uses the same microphone as the Bluetooth handsfree system (see illustra- tion on page 261) and the voice recognition system's replies come via the car's speakers.

Language

Language list.

Voice recognition is not possible for all lan- guages. Languages available for voice recog- nition are marked with an icon in the language list - . Changing the language is performed in the menu system MY CAR, see page 202.

1 Only applies to vehicles equipped with Volvo's navigation system - RTI (Road and Traffic Information System).

06 Infotainment system

Voice recognition* mobile phone

06

* Option/accessory, for more information, see Introduction. 271

Remember

Steering wheel keypad.

Button for voice recognition

To activate the system

Before voice commands to a mobile phone can be used the mobile phone must be paired and connected via Bluetooth handsfree. If a tele- phone command is given and no mobile phone is paired, then the system will provide informa- tion about this. For information on pairing and connecting a mobile phone, see page 262.

Press the button for voice recognition (1) in order to activate the system and initiate a dialogue with voice commands. The sys- tem will then display commonly used com- mands in the TV screen in the centre con- sole.

Keep the following things in mind when you use the voice recognition system:

For a command - speak after the tone, with normal voice at normal speed.

Do not speak while the system is replying (the system cannot understand commands during this time).

The car's doors, windows and sunroof* must be closed.

Avoid background noise in the passenger compartment.

NOTE

If the driver is unsure of which command to use, he (she) can say "Help" - the system then responds with a few different com- mands which can be used in the current sit- uation.

Voice commands can be disabled by:

saying "Cancel"

not speaking

a long press on the steering wheel but- ton for Voice recognition

Press EXIT or another main source but- ton (e.g. MEDIA).

Help functions for voice recognition

Instructions: A function that helps you get familiar with the system and the procedure for giving commands.

Voice training: A function that enables the voice recognition system to learn to know your voice and your accent. The function provides an opportunity to voice train two user profiles.

The help functions can be accessed by press- ing the MY CAR button on the control panel in the centre console and then turning TUNE to the desired menu option.

Instructions

The instructions can be started in two ways:

NOTE

This instruction and voice training can only be started when the car is parked.

Press the button for Voice recognition and say "Voice instructions".

Activate the instructions in the menu sys- tem MY CAR under Settings Voice

settings Voice tutorial. For a descrip- tion of the menu system, see page 200.

The instructions are divided into 3 lessons, which take around 5 minutes in total to com- plete. The system starts with the first lesson.

06 Infotainment system

Voice recognition* mobile phone

06

272 * Option/accessory, for more information, see Introduction.

To skip a lesson and go to the next one, press the button for voice recognition and say "Next". Go back to the previous lesson by say- ing "Previous".

Exit the instructions by means of a long press on the button for voice recognition.

Voice training

The system displays up to fifteen phrases for you to say. Voice training can be started in the menu system MY CAR under Settings

Voice settings Voice training. Choose between User 1 or User 2. For a description of the menu system, see page 200.

After voice training has been completed, remember to set your user profile under Voice

user setting.

Additional settings in MY CAR

User setting - Two user profiles can be set, the function is activated in the menu system MY CAR under Settings Voice

settings Voice user setting. Choose between User 1 or User 2. For a descrip- tion of the menu system, see page 200.

Voice volume - Can be changed in the menu system MY CAR under Settings

Voice settings Voice output volume. For a description of the menu system, see page 200.

Using voice commands

The driver initiates a dialogue with the voice commands by pressing the button for voice recognition (see illustration on page 271).

Once a dialogue has been started, commonly used commands will be shown in the TV screen. Greyed-out text or text within brackets is not included in the spoken command.

When the driver becomes accustomed to the system, he/she can speed up the command dialogue and skip the prompts from the sys- tem, by briefly pressing the button for voice recognition.

Commands can be given in several ways

The command "Phone call contact" can be pronounced as e.g.:

"Phone > Call contact" - Say "Phone", wait for the system's reply, and then continue by saying "Call contact."

or

"Phone call contact" - Say the whole com- mand in one sequence.

Quick commands

Quick commands for the phone can be found in the menu system MY CAR under Settings

Voice settings Voice command list

Phone commands and General commands.

For a description of the menu system, see page 200.

Dial a number

The system understands the numbers 0 (zero) to 9 (nine). These numbers can be pronounced individually, in groups of several numbers at a time, or the whole number all at once. Numbers greater than 9 (nine) cannot be handled by the system, e.g. 10 (ten) or 11 (eleven) are not pos- sible.

The following is an example of a dialogue with voice commands. The system's reply will vary depending on the situation.

The user starts the dialogue by saying:

Phone > call number

or

Phone call number

System reply

Number?

User action

Start saying the numbers (as individual units, i.e. six-eight-seven, etc.) in the phone number. If you say several numbers and pause, the sys- tem will repeat them, and then say "Continue".

Continue to say the numbers. When finished, finish the command by saying "Call".

You can also change the number by saying the commands "Correct" (which deletes

06 Infotainment system

Voice recognition* mobile phone

06

* Option/accessory, for more information, see Introduction. 273

the last spoken group of numbers) or "Delete" (which deletes the whole spoken phone number).

Dialling from the call register

The following dialogue allows you to make a phone call from one of your mobile phone's call registers.

The user starts the dialogue by saying:

Phone > call from the call register

or

Phone call from the call register

Continue by responding to the system's prompts.

Call a contact

The following dialogue allows you to call your pre-defined contacts in the mobile phone.

The user starts the dialogue by saying:

Phone > call contact

or

Phone call contact

Continue by responding to the system's prompts.

Consider the following when you call a contact:

If there are several contacts with similar names, they will be presented in the dis-

play in the numbered rows and the system prompts you to select a row number.

If there are more rows in the list than can be displayed simultaneously, saying "Down" allows you to scroll down in the list (and saying "Up" allows you to scroll up in the list).

Calling voice mailbox

The following dialogue allows you to call your voice mailbox to check if you have received any messages. The phone number for your voice mailbox must be registered in the Bluetooth function, see page 264.

The user starts the dialogue by saying:

Phone > call voice mailbox

or

Phone call voice mailbox

Continue by responding to the system's prompts.

06 Infotainment system

TV*

06

274 * Option/accessory, for more information, see Introduction.

General

NOTE

This system only supports TV transmissions in countries which transmit signals in mpeg-2 format and follow the DVB-T stand- ard. The system does not support TV trans- missions in mpeg-4 format or analogue transmissions.

NOTE

The TV picture is only shown when the car is stationary. When the car is moving at a speed over about 6 km/h the picture disap- pears, No visual media available while driving appears on the display screen, although the audio is heard during this time. The picture reappears when the car has stopped.

Cars with RSE do not shut off the rear screens.

NOTE

The reception is dependent both on how good the signal strength and signal quality are. The transmission may be disturbed by various factors such as tall buildings or the TV transmitter being far away. Coverage level can also vary depending on where in the country you are located.

IMPORTANT

A TV licence is required for this product in some countries.

Menus

The menus in MEDIA are controlled from the centre console and the steering wheel key- pad*. For general information on menu naviga- tion, see page 236 and menu overview, see page 240.

Overview

Centre console control panel.

MEDIA button. Last active source (e.g. iPod or TV) is activated. If a source is acti- vated and you press MEDIA then a short-

cut menu is shown with commonly used menu options.

Station presets, numeric input.

Navigate in channel lists or menus by turn- ing TUNE.

Confirm your selection or go to the menu by pressing OK/MENU.

EXIT - leads up in the menu system, stops the function in progress.

The next available channel is shown by pressing / .

NOTE

If the car is equipped with a steering wheel keypad* and/or remote control* then in many cases these can be used instead of the buttons in the centre console. For a description of the steering wheel keypad, see page 234. For a description of the remote control, see page 278.

06 Infotainment system

TV*

06

* Option/accessory, for more information, see Introduction. 275

Watch TV

Press MEDIA, turn TUNE until TV is shown in the TV screen, press OK/MENU. > A search starts and after a short while

the most recently used channel is shown.

Changing channel

It is possible to change channel as follows:

Turn TUNE, a list of all available channels in the area is shown. If any of these chan- nels is already saved as a preset then its preset number is shown to the right of the channel name. Continue turning TUNE to reach the desired channel and press OK/

MENU.

By pressing the preset buttons (0-9).

Via a short press on the / buttons the next available channel in the area is shown.

NOTE

If the car has been moved within the coun- try, for example, from one city to another, it is not certain that the presets are available at the new location as the frequency range may have changed. In which case, carry out a new search and save a new preset list, see the function "Save the available TV channels as presets", page 276.

NOTE

If no reception is available on the preset buttons, it may be because the car is at a location other than where the scan of TV channels was run, for example, if the car was driven from Germany to France. A new selection of country and a new search may then need to be carried out.

Searching TV channels/Preset list

1. Press TV mode on OK/MENU.

2. Turn TUNE to TV menu and press OK/

MENU.

3. Turn TUNE to Select country and press OK/MENU. > If one or more countries have previously

been selected then they are shown in a list.

4. Turn TUNE to either Other countries or one of the previously selected countries. Press OK/MENU. > A list of all available countries is shown.

5. Turn TUNE to the desired country (e.g. Sweden) and press OK/MENU. > An automatic scan for available TV

channels starts, this scan takes a little while. During this time the figure for each channel found and added as a pre-

set is shown. When the scan is com- plete a message is shown and the pic- ture is shown. A preset list (max. 30 pre- sets) has now been created and is avail- able. To change channel, see page 275.

The scan and preset storage can be cancelled with EXIT.

Channel management

The preset list can be edited. You can change the order of the channels that are shown in the preset list. A TV channel can have more than one place in the preset list. The TV channel positions can also vary in the preset list.

To change the order in the preset list, go in TV mode to TV menu Reorganise presets.

1. Turn TUNE to the channel you want to move in the list and confirm with OK/

MENU. > The selected channel is highlighted.

2. Turn TUNE to the new location in the list and confirm with OK/MENU. > The channels change places with each

other.

After the preset channels (max. 30) come all the other channels available in the area. It is pos-

06 Infotainment system

TV*

06

276 * Option/accessory, for more information, see Introduction.

sible to move a channel up to a place in the preset list.

Save the available TV channels as

presets

If the car has been moved within the country, for example, from one city to another, it is not certain that the presets are available at the new location as the frequency range may have changed. In which case, carry out another scan and save a new preset list.

1. Press TV mode on OK/MENU.

2. Turn TUNE to TV menu and press OK/

MENU.

3. Turn TUNE to Autostore and press OK/

MENU. > An automatic scan for available TV

channels starts, this scan takes a little while. During this time the figure for each channel found and added as a pre- set is shown. When the scan is com- plete a message is shown and the pic- ture is shown. A preset list (max. 30 pre- sets) has now been created and is avail- able. To change channel, see page 275.

Scanning the TV channels

This function automatically scans through the frequency range for all channels available in the

area where you are. When a channel is found, it is shown for approx. 10 seconds before scanning is resumed. Scanning is stopped with EXIT, then the channel that you just watched continues to be shown. Scanning does not affect the preset list.

Activate scanning in TV mode under TV menu

Scan.

Teletext

It is possible to read Teletext. Follow these steps:

1. Press the button on the remote con- trol.

2. Enter the page number (3 digits) with the number keys (0-9) to select page. > The page is shown automatically.

Enter new page number, or press the remote control buttons / to go to the next page.

Return to TV screen with EXIT or by pressing the button on the remote control.

It is also possible to control the teletext with the coloured buttons on the remote control.

Information about the current programme

Press the INFO button in order to display the information about the current programme, the next programme and its start time. If the INFO button is pressed once more then addi- tional information on the current programme can sometimes be displayed, such as start and end times and a brief description of the current programme. For more information on the INFO button, see page 233.

To return to the TV picture, wait several sec- onds or press EXIT.

Picture settings

The settings for brightness and contrast can be adjusted. For more information, see page 254.

The reception is lost

If the reception for the TV channel that is being shown disappears then the picture will freeze. Shortly after this a message appears informing that the reception has been lost for the current TV channel, and a new search for the channel continues. When the reception returns the dis- play of the TV channel starts immediately. It is possible to change channel at any time when the message is shown.

If the message Reception lost, searching is shown then this is because the system has

06 Infotainment system

TV*

06

* Option/accessory, for more information, see Introduction. 277

detected that there is no reception for all TV channels. One possible reason may be that a border has been crossed and that the system is set to the wrong country. In which case, change to the right country in accordance with "Searching TV channels/Preset list", see page 275.

06 Infotainment system

Remote control*

06

278 * Option/accessory, for more information, see Introduction.

General*

Corresponds to TUNE in the centre con- sole.

The remote control can be used for all func- tions in the infotainment system. The remote control's buttons have the same functions as the buttons in the centre console or steering wheel keypad*.

When using the remote control, first press the remote control's button to position F. Then aim the remote control at the IR receiver, which is located to the right of the INFO button (see page 233) in the centre console.

If the car is fitted with rear TV screens* and you want to operate one of these, select the required TV screen with the button on the remote control. Then aim the remote control at the IR receiver for the TV screen to be oper- ated, see page 280.

WARNING

Keep loose objects such as mobile phones, cameras, remote controls for accessories, etc. in the glove compartment or other com- partments. Otherwise they may injure peo- ple in the car in the event of sudden braking or a collision.

NOTE

Do not expose the remote control to direct sunlight (e.g. on the instrument panel) - oth- erwise problems may arise with the batter- ies.

functions

Key Function

Change between:

L = Rear left TV screen*

F = Front TV screen

R = Rear right TV screen*

Change to navigation*

Change to radio source (AM, FM1 etc.)

Change to media source (Disc, TV* etc.)

Change to Bluetooth hands- free*

Scroll/fast rewind, change track/ song.

Play/pause

Stop

Scroll/fast forward, change track/song.

Menu

06 Infotainment system

Remote control*

06

* Option/accessory, for more information, see Introduction. 279

Key Function

To previous, cancels function, deletes input characters

Navigate up/down

Navigate right/left

Confirm selection or go to the menu system for the selected source

Volume, decrease

Volume, increase

0-9 Preset channels, number and let- ter input

Shortcuts for favourite setting.

Information about the current programme, song, etc. Also used when there is more information available than can be shown in the TV screen.

Selection of language for sound- track

Key Function

Subtitles, selection of language for text

Teletext*, On/Off

Replacing the battery in the remote control

NOTE

Battery life is normally 1-4 years and depends on how much the remote control is used.

The remote control is powered by four batter- ies of the AA/LR6 type.

Take along extra batteries for a long journey.

1. Push down the catch on the battery cover and slide the battery cover in the direction of the infrared lens.

2. Remove the used batteries, turn the new batteries in accordance with the symbols in the battery compartment and fit them.

3. Refit the cover.

NOTE

Be sure to dispose of the exhausted batter- ies in an environmentally safe manner.

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

280 * Option/accessory, for more information, see Introduction.

Overview

TV screen

Headphones socket

On/Off button

A/V-AUX input

Remote control

Headphones

IR receiver/transmitter

General

The RSE system is a system for rear-seat entertainment that makes it possible to e.g. watch video, play music, listen to the radio, watch TV* or connect other external devices (e.g. a games console).

The RSE system is fully integrated with the car's infotainment system and can be used simultaneously with other functions of the info- tainment system.

When the rear seat passengers are using e.g. A/V-AUX or watching TV* while listening with headphones, the driver and front seat passen- ger can still use the car's radio or media player.

However, only one disc at a time can be played in the media player. It is possible to play back music from e.g. an iPod or steaming audio files via Bluetooth .

The RSE system can be controlled from the front TV screen (parental control).

It is possible to display or play back various media from different sources on each TV screen. It is also possible to display or play back media from the same source on one or more of the TV screens (front, right rear and left rear). It is not possible to play back video from

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

* Option/accessory, for more information, see Introduction. 281

USB while a CD or DVD disc is being played back.

IMPORTANT

When loading luggage and large objects in the vehicle, ensure that sufficient space is left for the TV screens in the head restraints, so that the TV screens are not scratched or damaged. Cover the TV screens with appro- priate covering material during loading.

NOTE

The TV screens and remote control do not work at very low or high temperatures - they only "come alive" after the climate control system has created an acceptable operat- ing temperature in the passenger compart- ment.

NOTE

Clean the lens on the IR receiver regularly with a damp cloth, a dirty lens affects remote control function.

Power consumption, ignition positions

The system can be activated in ignition position I or II and while the engine is running. When the car is being started the film stops temporarily and continues when the engine has started.

NOTE

For prolonged use (more than 10 minutes) with the engine switched off, the capacity of the vehicle's battery may fall to such a low level that it is not possible to start the engine.

In this case a message will be displayed on the screen.

Menus

The menus for RSE are controlled using the remote control. For general information on menu navigation and menu structures, see page 286.

Remote control

The RSE system is equipped with a remote control. Using this it is possible to control the functions for each TV screen. The remote con- trol can also be used to control other functions in the infotainment system, even from the rear seat.

For information on the remote control, see page 278.

Wireless headphones

Control for channel A (CH.A) or channel B (CH.B)

On/Off button

Volume

Indicator lamp On/Off

The RSE system includes two wireless head- phones.

The wireless headphones are activated with the On/Off button (2), an indicator lamp illumi- nates (4). Select CH.A (channel A) or CH.B

(channel B) using the control (1). Adjust the vol- ume using the volume control (3).

The headphones are automatically switched off after about 3 minutes if they are not used.

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

282 * Option/accessory, for more information, see Introduction.

Battery replacement in wireless

headphones

The headphones are powered by two batteries of the AAA model.

Take along extra batteries for a long journey.

Wireless headphones.

1. Unscrew the screw and detach the battery cover.

2. Remove the used batteries, turn the new batteries in accordance with the symbols in the battery compartment and insert them.

3. Fit the cover and screw in the screw.

Environmental care

Be sure to dispose of the exhausted batteries in an environmentally safe manner.

Headphones socket

It is possible to connect external headphones via the headphones socket (3.5 mm) on the side of the head restraints, see the illustration on page 280. The volume is controlled using the remote control.

A/V-AUX input, Electrical socket 12 V

The input allows you to connect other equip- ment. Always follow the instructions included with the external equipment, or from the man- ufacturer or reseller, when connecting. Equip- ment connected via the A/V-AUX input can use the TV screens, wireless headphones, head- phones sockets and the car's speakers.

NOTE

The customer is responsible that equipment connected to the A/V-AUX input or head- phones socket does not cause interference in the vehicle's RSE system.

Connection of A/V-AUX input

The A/V-AUX input is located under the armrest in the tunnel console.

1. Connect the video cable to the yellow socket.

2. Connect the left-hand audio cable to the white socket and the right-hand one to the red socket.

3. Connect the power cable to the electrical socket if your equipment is designed for 12 V.

Always follow the instructions for the external equipment when connecting.

For electrical socket location, see page 227

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

* Option/accessory, for more information, see Introduction. 283

Playing back audio/video via the A/V-

AUX input

1. Switch on the rear TV screen by means pressing the On/Off button on the TV screen.

2. Aim the remote control at the IR receiver on the TV screen and press , turn TUNE to A/V AUX , confirm selection with

.

3. Switch on the connected device and press PLAY or equivalent on the connected device.

Input volume

The input volume is adjusted in the menu under A/V AUX input volume.

To activate the system

The RSE system can be activated from either the front or rear TV screen.

From the front TV screen, press MEDIA, turn TUNE and select RSE, confirm with OK/

MENU.

From the rear TV screen, by means of pressing the On/Off button on the rear TV screen and then pressing or on the remote control, turn TUNE and select a source (e.g. Disc), confirm selection with .

Settings from the front TV screen

MEDIA

TUNE

OK/MENU

EXIT

Selection of source in the rear TV

screens

From the front TV screen it is possible to select the source (what shall be displayed or played back) for the right and left-hand rear TV screens respectively. It is possible select the same source for both or different sources for the right and left-hand TV screens respectively.

1. Press MEDIA, turn TUNE to scroll down to RSE on the TV screen, confirm selection with OK/MENU.

2. Turn TUNE to select the right, left-hand or both TV screens, and confirm with OK/

MENU. 3. Turn TUNE to select RADIO, MEDIA (or

RSE settings). Press OK/MENU to con- firm.

4. Turn TUNE to the desired source (e.g. Disc) and confirm with OK/MENU. The selected source will start automatically (if e.g. a disc is in the media player).

Cancel and go back with EXIT.

The remote control can also be used for set- tings. For more information on the remote con- trol, see page 278.

Parental control for the TV*

It is possible to set a permitted age limit for the TV, so that only programmes for the appropri- ate age can be viewed. The setting is activated for both TV screens.

Activate under RSE settings TV parental

control, in accordance with point 2-4 in the section "Selection of source in the rear TV screens", see page 283. Choose between Age

0-6, Age 7-13, Age 14-18 and No parental

control.

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

284 * Option/accessory, for more information, see Introduction.

Audio off

It is possible to mute the two rear TV screens from the front TV screen. The function is acti- vated under RSE settings Mute, in accord- ance with point 2-4 in the section "Selection of source in the rear TV screens", see page 283.

TV screen off

It is possible to switch off the video for the two rear TV screens from the front TV screen. The function is activated under RSE settings

Display off, in accordance with point 2-4 in the section "Selection of source in the rear TV screens", see page 283.

Press one of the remote control's numeric keys (0 - 9) to switch on the TV screen again. The TV screen is also switched to the On mode when the ignition is switched on.

Switching off the remote control (front)

It is possible to switch off the IR receiver for the front TV screen, which means that the remote control cannot be used for the front TV screen. The function is activated under RSE settings

Disable remote control (front), in accord- ance with point 2-4 in the section "Selection of source in the rear TV screens", see page 283.

TV screen settings1 rear TV screen

When playing back video files and displaying TV* a pop-up menu is available by means of pressing on the remote control. The pop- up menu has different content depending on what is being played back or displayed.

Day/Night mode

The TV screen can be set in three different modes for different light conditions. Choose between Auto, Day and Night.

Press on the remote control and change the mode under Day/Night mode on the TV screen. For general information on menu navi- gation and menu structures, see page 286.

Picture settings

You can adjust the settings for brightness, con- trast, shade and colour.

Press on the remote control and change the mode under Image settings on the TV screen. For general information on menu navi- gation and menu structures, see page 286.

Display format

It is possible to choose between display for- mats Normal, Zoom and Screen fit.

Normal - The image is shown in its normal mode (normally 4:3 or 16:9 format).

Zoom - Full screen used but parts of the image are cut off.

Screen fit - Full screen used but image pro- portions may be slightly distorted.

Unless otherwise stated the image is displayed in the screen format Normal.

Press on the remote control and change the mode under Screen format on the TV screen. For general information on menu navi- gation and menu structures, see page 286.

Source menu

What is shown in the pop-up menu for the source menu depends on what is being played back or displayed, it can be e.g. CD/DVD data

menu or USB menu. For general information on menu navigation and menu structures, see page 286.

DVD disc's menu2

If a DVD video disc is played back then this menu option is shown in the pop-up menu. For general information on menu navigation and menu structures, see page 286.

1 Only available for playing back video files and displaying TV*. 2 Only applies to DVD video discs.

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

* Option/accessory, for more information, see Introduction. 285

Menu settings from the rear TV screen

For general information on menu navigation and menu structures, see page 286.

Random3

See page 253.

Repeat folder4

See page 253.

DivX Video On Demand4

The media player can be registered in order to play DivX VOD type files from burned discs or USB. The code for registration is available in disc mode or USB mode under DivX VOD

code. For more information visit www.divx.com/vod.

USB hub

It is possible to connect a USB hub to the USB connection, see page 257.

TV settings*

Searching TV channels/Preset list

See page 275.

Save the available TV channels as

presets

See page 276.

Scanning the TV channels

See page 276.

Music, video, radio and TV*

Playing back music

It is possible to play back music from disc tracks/audio files via the car's media player, USB port/AUX input or via streaming audio files from a Bluetooth -connected phone.

NOTE

The system only supports one iPod user at a time in the navigation mode (playlist).

For more information about media players, USB/AUX and Media Bluetooth , see the pages 251, 255 and 258.

1. Switch on the wireless headphones, select CH.A for left-hand screen or CH.B for right-hand screen.

2. Aim the remote control at the IR receiver on the TV screen and press , turn TUNE to desired source (Disc, USB, AUX etc.), confirm selection with .

3. Insert a CD disc in the car's media player or connect an external audio source via the car's USB port/AUX input or via Blue- tooth .

Playback and navigation in playlists

Rotate the scroll wheel on the remote control to access the playlist/folder structure. either gives confirmation of subfolder selection or starts playing back the selected disc track/ audio file. It is also possible to play back the disc track/audio file using on the remote control and change the disc tracks/audio file using / . Stop playback using

.

For more information, see page 252.

Watching video

It is possible to watch video from disc tracks/ video files via the car's media player or USB port.

3 Applies to CD-Audio, CD/DVD discs, USB and iPod . 4 Applies to CD/DVD discs and USB.

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

286 * Option/accessory, for more information, see Introduction.

For more information about media players and USB, see the pages 251 and 255.

1. Switch on the wireless headphones, select CH.A for left-hand screen or CH.B for right-hand screen.

2. Aim the remote control at the IR receiver on the TV screen and press , turn TUNE to desired source (Disc or USB), confirm selection with .

3. Insert a DVD disc in the car's media player or connect an external source via the car's USB port.

Playback and navigation

Play back disc track/video file using on the remote control and change disc track/ video file using / . Stop playback using . For more information about play- back and navigation of DVD video discs, see page 253 and for video files, see page 252.

Fast forward/reverse

Start fast forward/rewind by means of a long press on the buttons / . Then increase fast forward/rewind speed by short presses the buttons. Audio files are fast for- warded/rewound at one speed, while video files can be fast forwarded/rewound at four dif- ferent speeds. Fast forward/rewind is stopped by pressing -, - or the equivalent opposite / button.

Listening to radio

It is possible to listen to radio via the car's radio.

1. Switch on the wireless headphones, select CH.A for left-hand screen or CH.B for right-hand screen.

2. Aim the remote control at the IR receiver on the TV screen and press , turn TUNE to desired source (AM, FM1, DAB1* etc.), confirm selection with .

3. Select a station with one of the preset but- tons (0 - 9) on the remote control or press

/ , the radio will search for the next/previous available station.

For more information on the radio, see page 244.

Watching TV*

It is possible to watch TV via the car's media player.

1. Switch on the wireless headphones, select CH.A for left-hand screen or CH.B for right-hand screen.

2. Aim the remote control at the IR receiver on the TV screen and press , turn TUNE to TV, confirm selection with .

3. Select a channel with one of the preset buttons (0 - 9) on the remote control or

press / , the next/previous channel available in the area is displayed.

For more information on the TV, see page 274.

Menu navigation RSE

General

The RSE menus are operated both from the front TV screen, and from either of the rear TV screens. From the front TV screen it is possible to both activate a source for a rear TV screen, and to make certain settings for the two rear TV screens.

RSE menus front TV screen

To access the menu RSE must first be selected under MEDIA via the front TV screen. Then press OK/MENU to access the menu. Turn TUNE to the desired selection and confirm with OK/MENU. The remote control and steering wheel keypad can also be used.

It is possible to make settings for either right or left-hand TV screen or both TV screens.

Left RSE screen menu, Right RSE screen

menu and Both RSE screen menus:

Power off/Power on

RADIO

MEDIA

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

* Option/accessory, for more information, see Introduction. 287

RSE settings

Mute

Display off

Disable remote control (front)

TV parental control

Reset all RSE settings

Pop-up menu RSE5

Press on the remote control when a video file is being played back or the TV* is being displayed in order to access the pop-up menu. Menu selections are made using the scroll wheel and the buttons on the remote control. For information on the remote control, see page 278.

Screen format

Image settings

Day/Night mode

Source menu6

DVD disc menu7

RSE menus rear TV screens

Press on the remote control when a source (e.g. Disc) is selected in order to access the RSE menus for the rear TV screen.

Menu selections are made using the scroll wheel and the buttons on the remote control. For information on the remote control, see page 278.

RADIO

Menu valid for AM, FM1, FM2, DAB1* and DAB2*:

Day/Night mode

Display off

Reset all RSE settings

MEDIA

RSE CD Audio menu

Disc menu

Random

Day/Night mode

Display off

Reset disc settings

RSE CD/DVD Data menu

Disc menu

Random

Repeat folder

DivX VOD code

Day/Night mode

Display off

Reset disc settings

RSE DVD Video menu

DVD Video Menu

DVD disc menu

Subtitles

Audio tracks

Advanced settings

Day/Night mode

Display off

Reset disc settings

5 Only applies when playing back videos or displaying TV*. 6 What is shown in the pop-up menu for the source menu depends on what is being played back or displayed, it can be e.g. CD/DVD data menu or USB menu. 7 Only applies to DVD video discs.

06 Infotainment system

RSE - Rear Seat Entertainment system*

06

288 * Option/accessory, for more information, see Introduction.

RSE USB menu

USB menu

Random

Repeat folder

DivX VOD code

Select USB device

Day/Night mode

Display off

Reset USB settings

RSE AUX menu

AUX menu

AUX input volume

Day/Night mode

Display off

Reset AUX settings

RSE A/V-AUX menu

A/V AUX menu

A/V AUX input volume

Day/Night mode

Display off

Reset AUX settings

RSE iPod menu

iPod menu

Random

Day/Night mode

Display off

Reset iPod settings

RSE Bluetooth menu

Bluetooth menu

Random

Day/Night mode

Display off

Reset Bluetooth settings

RSE TV menu*

TV menu

Select country

Autostore

Scan

Day/Night mode

Display off

Reset TV settings

06 Infotainment system

06

289

290

Recommendations during driving......................................................... 292 Refuelling.............................................................................................. 295 Fuel....................................................................................................... 296 Loading................................................................................................. 299 Cargo area............................................................................................ 302 Driving with a trailer.............................................................................. 305 Towing and recovery............................................................................. 311

DURING YOUR JOURNEY

07 During your journey

Recommendations during driving

07

292

General

Economical driving

Driving economically means driving smoothly while thinking ahead and adjusting your driving style and speed to the prevailing conditions.

Drive in the highest gear possible, adapted to the current traffic situation and road - lower engine speeds result in lower fuel consumption.

Avoid driving with open windows.

Avoid sudden unnecessary acceleration and heavy braking.

Remove unnecessary items from the car - the greater the load the higher the fuel con- sumption.

Use engine braking to slow down, when it can take place without risk to other road users.

A roof load and ski box increase air resis- tance, leading to higher fuel consumption - remove the load carriers when not in use.

Do not run the engine to operating tem- perature at idling speed, but rather drive with a light load as soon as possible - a cold engine consumes more fuel than a warm one.

A car with D4 AWD or D5 AWD engine in combination with a 6-speed manual gear- box is started in 2nd gear.

For more information and further advice, see the pages 12 and 382.

WARNING

Never switch off the engine while moving, such as downhill, this deactivates important systems such as the power steering and brake servo.

Driving in water

The car can be driven through water at a maxi- mum depth of 25 cm at a maximum speed of 10 km/h. Extra caution should be exercised when passing through flowing water.

During driving in water, maintain a low speed and do not stop the car. When the water has been passed, depress the brake pedal lightly and check that full brake function is achieved. Water and mud for example can make the brake linings wet resulting in delayed brake function.

Clean the electric contacts of the electric engine block heater and trailer coupling after driving in water and mud.

Do not let the car stand with water over the sills for any long period of time - this could cause electrical malfunctions.

IMPORTANT

Engine damage can occur if water enters the air filter.

In depths greater than 25 cm, water could enter the transmission. This reduces the lubricating ability of the oils and shortens the service life of these systems.

In the event of the engine stalling in water, do not try restart - tow the car from the water to a workshop - an authorised Volvo work- shop is recommended. Risk of engine breakdown.

Engine, gearbox and cooling system

Under special conditions, for example hard driving in hilly terrain and hot climate, there is a risk that the engine and drive system may overheat - in particular with a heavy load.

For information about overheating when driv- ing with a trailer, see page 305.

Remove any auxiliary lamps from in front of the grille when driving in hot climates.

If the temperature in the engine's cooling system is too high the instrument panel's warning symbol is illuminated and there is a text message displayed there High

engine temp Stop safely - stop the car in a safe way and allow the engine to run at idling speed for several minutes to cool down.

07 During your journey

Recommendations during driving

07

293

If the text message High engine temp

Stop engine or Coolant level low, Stop

engine is shown then the engine must be switched off after stopping the car.

In the event of overheating in the gearbox a built-in protection function is activated which, amongst other things, illuminates the instrument panel's warning symbol and there is a text message displayed there Transmission hot Reduce speed or Transmission hot Stop safely - follow the recommendation given and lower the speed and stop the car in a safe way and allow the engine to run at idling speed for a few minutes to allow the gearbox to cool down.

If the car overheats, the air conditioning may be switched off temporarily.

Do not turn the engine off immediately you stop after a hard drive.

NOTE

It is normal for the engine's cooling fan to operate for a while after the engine has been switched off.

Open tailgate

WARNING

Do not drive with the tailgate open. Toxic exhaust fumes could be drawn into the car through the cargo area.

Do not overload the battery

The electrical functions in the car load the bat- tery to varying degrees. Avoid using the key position II when the engine is switched off. Instead use the I mode - which uses less power.

Also, be aware of different accessories that load the electrical system. Do not use functions which use a lot of power when the engine is switched off. Examples of such functions are:

ventilation fan

headlamps

windscreen wiper

audio system (high volume).

If the battery voltage is low the information dis- play shows the text Low battery Power save

mode. The energy-saving function then shuts down certain functions or reduces certain functions such as the ventilation fan and/or audio system.

In which case, charge the battery by star- ting the engine and then running it for at

least 15 minutes - battery charging is more effective during driving than running the engine at idling speed while stationary.

Before a long journey

Check that the engine is working normally and that fuel consumption is normal.

Make sure that there are no leaks (fuel, oil or other fluid).

Check all bulbs and tyre tread depths.

Carrying a warning triangle is a legal requirement in certain countries.

Winter driving

Check the following in particular before the cold season:

The engine coolant must contain at least 50% glycol. This mixture protects the engine against frost erosion down to approximately 35 C. To achieve optimum antifreeze protection, different types of gly- col must not be mixed.

The fuel tank must be kept filled to prevent condensation.

Engine oil viscosity is important. Oils with lower viscosity (thinner oils) facilitate star- ting in cold weather and also reduce fuel consumption while the engine is cold. For more information on suitable oils, see page 379.

07 During your journey

Recommendations during driving

07

294

IMPORTANT

Low viscosity oil must not be used for hard driving or in hot weather.

The condition of the battery and charge level must be inspected. Cold weather pla- ces great demands on the battery and its capacity is reduced by the cold.

Use washer fluid to avoid ice forming in the washer fluid reservoir.

To achieve optimum roadholding Volvo rec- ommends using winter tyres on all wheels if there is a risk of snow or ice.

NOTE

The use of winter tyres is a legal requirement in certain countries. Studded tyres are not permitted in all countries.

Slippery driving conditions

Practise driving on slippery surfaces under controlled conditions to learn how the car reacts.

07 During your journey

Refuelling

07

295

Refuelling

Opening/closing the fuel filler flap

Open the fuel filler flap using the button on the lighting panel - the flap opens when the button is released.

The arrow on the information display's symbol reminds which side of the car

the fuel filler cap is located.

Close the fuel filler flap by pressing it in until a click confirms that it is closed.

Opening the fuel filler flap manually

The fuel filler flap can be opened manually when electric opening from the passenger compartment is not possible.

1. Open/remove the side hatch in the cargo area (same side as fuel filler flap) and locate the green cord with handle.

2. Pull the cord gently straight back until the fuel filler flap folds out with a "click".

IMPORTANT

Pull the wire gently - minimal force is required to disengage the hatch lock.

Opening/closing the fuel cap

A certain overpressure may arise in the tank in the event of high outside temperatures. Open the cap slowly.

After refuelling - refit the cap and turn it until one or more clicking sounds are heard.

Filling up with fuel

Do not overfill the tank but fill until the pump nozzle cuts out.

NOTE

Excess fuel in the tank can overflow in hot weather.

07 During your journey

Fuel

07

296

General information on fuel

Fuel of a lower quality than that recommended by Volvo must not be used as engine power and fuel consumption is negatively affected.

WARNING

Always avoid inhaling fuel vapour and get- ting fuel splashes in the eyes.

In the event of fuel in the eyes, remove any contact lenses and rinse the eyes in plenty of water for at least 15 minutes and seek medical attention.

Never swallow fuel. Fuels such as petrol, bioethanol and mixtures of them and diesel are highly toxic and could cause permanent injury or be fatal if swallowed. Seek medical attention immediately if fuel has been swal- lowed.

WARNING

Fuel which spills onto the ground can be ignited.

Switch off the fuel-driven heater before star- ting to refuel.

Never carry an activated mobile phone when refuelling. The ring signal could cause spark build-up and ignite petrol fumes, leading to fire and injury.

IMPORTANT

Mixing different types of fuel or the use of fuel not recommended invalidates Volvo's guarantees, and any associated service agreement. This applies to all engines. NOTE: It does not apply to cars with engines that are adapted to run on ethanol fuel (E85).

NOTE

Extreme weather conditions, driving with a trailer or driving at high altitudes in combi- nation with fuel grade are factors that could affect the car's performance.

Catalytic converters

The purpose of the catalytic converters is to purify exhaust gases. They are located close to the engine so that operating temperature is reached quickly.

The catalytic converters consist of a monolith (ceramic or metal) with channels. The channel walls are lined with a thin layer of platinum/rho- dium/palladium. These metals act as catalysts, i.e. they participate in and accelerate a chem- ical reaction without being used up them- selves.

Lambda-sondTM oxygen sensor

The Lambda-sond is part of a control system intended to reduce emissions and improve fuel economy.

An oxygen sensor monitors the oxygen content of the exhaust gases leaving the engine. This value is fed into an electronic system that con- tinuously controls the injectors. The ratio of fuel to air directed to the engine is continuously adjusted. These adjustments create optimal conditions for efficient combustion, and together with the three-way catalytic converter reduce harmful emissions (hydrocarbons, car- bon monoxide and nitrous oxides).

Petrol

Petrol must fulfil the EN 228 standard. Most engines can be run with octane ratings of 95 and 98 RON. Only in exceptional cases should 91 RON be used.

95 RON can be used for normal driving.

98 RON is recommended for optimum per- formance and minimum fuel consumption.

When driving in temperatures above +38 C, fuel with the highest possible octane rating is recommended for optimum performance and fuel economy.

07 During your journey

Fuel

07

297

IMPORTANT

Always refuel with unleaded petrol so as not to damage the catalytic converter.

Do not use additives not recommended by Volvo.

Diesel

Only use diesel fuel from well-known produc- ers. Never use diesel of dubious quality. Diesel should fulfil the EN 590 or JIS K2204 stand- ards. Diesel engines are sensitive to contami- nants in the fuel, such as excessively high vol- umes of sulphur particles for example.

At low temperatures (-6 C to -40 C), a paraffin precipitate may form in the diesel fuel, which may lead to ignition problems. Special diesel fuel designed for low temperatures around freezing point is available from the major oil companies. This fuel is less viscous at low tem- peratures and reduces the risk of paraffin pre- cipitate.

The risk of condensation in the fuel tank is reduced if the tank is kept well filled. When refuelling, check that the area around the fuel filler pipe is clean. Avoid spilling fuel onto the paintwork. Wash off any spillage with deter- gent and water.

IMPORTANT

Only ever use fuel that fulfils the European diesel standard.

The sulphur content must be a maximum of 50 ppm.

IMPORTANT

Diesel type fuels that must not be used:

Special additives

Marine diesel fuel

Heating oil

FAME1 (Fatty Acid Methyl Ester) and vegetable oil.

These fuels do not fulfil the requirements in accordance with Volvo recommendations and generate increased wear and engine damage that is not covered by the Volvo warranty.

Empty tank

The design of the fuel system in a diesel engine means that if the vehicle runs out of fuel, the tank may need to be vented in the workshop in order to restart the engine after fuelling.

Once the engine has stopped due to fuel star- vation, the fuel system needs a few moments

to carry out a check. Do this before starting the engine, once the fuel tank has been filled with diesel:

1. Insert the remote control key in the ignition switch and push it in to the end position (see page 78).

2. Press the START button without depress- ing the brake and/or clutch pedal.

3. Wait approx. 1 minute. 4. To start the engine: Depress the brake and/

or clutch pedal and then press the START button again.

NOTE

Before filling with fuel in the event of fuel shortage:

Stop the car on as flat/level ground as possible - if the car is tilting there is a risk of air pockets in the fuel supply.

Draining condensation from the fuel filter

The fuel filter separates condensation from the fuel. Condensation can disrupt engine opera- tion.

The fuel filter must be drained at the intervals specified in the Service and Warranty Booklet

1 Diesel fuel may contain a certain amount of FAME, but further amounts must not be added.

07 During your journey

Fuel

07

298 * Option/accessory, for more information, see Introduction.

or if you suspect that the car has been filled with contaminated fuel.

IMPORTANT

Certain special additives remove the water separation in the fuel filter.

Diesel particle filter (DPF)

Diesel cars are equipped with a particle filter, which results in more efficient emission con- trol. The particles in the exhaust gases are col- lected in the filter during normal driving. So- called "regeneration" is started in order to burn away the particles and empty the filter. This requires the engine to have reached normal operating temperature.

Regeneration of the filter is automatic and nor- mally takes 10-20 minutes. It may take a little longer at a low average speed. Fuel consump- tion may increase slightly during regeneration.

Regeneration in cold weather

If the car is frequently driven short distances in cold weather then the engine does not reach normal operating temperature. This means that regeneration of the diesel particle filter does not take place and the filter is not emptied.

When the filter has become approximately 80% full of particles, a warning triangle on the instrument panel illuminates, and the message

Soot filter full See manual is shown on the instrument panel display.

Start regeneration of the filter by driving the car until the engine reaches normal operating tem- perature, preferably on a main road or motor- way. The car should then be driven for approx- imately 20 minutes more.

NOTE

A smaller reduction of engine power may be noticed temporarily during regeneration.

When regeneration is complete the warning text is cleared automatically.

Use the parking heater* in cold weather so that the engine reaches normal operating tempera- ture more quickly.

IMPORTANT

If the filter fills up with particles then it can be difficult to start the engine and the filter will be incapable of functioning. Then there is a risk that the filter will have to be replaced.

Fuel consumption and emissions of carbon dioxide

Fuel consumption figures may change if the car is equipped with extra equipment that affects the car's weight. See information on weights page 374 and table page 382.

The manner in which the car is driven, and other non-technical factors can also affect fuel consumption.

Consumption is higher and power output lower for fuel with an octane rating of 91 RON.

NOTE

Extreme weather conditions, driving with a trailer or driving at high altitudes in combi- nation with fuel grade are factors that could affect the car's performance.

07 During your journey

Loading

07

299

General information on loading

Payload depends on the car's kerb weight. The total of the weight of the passengers and all accessories reduces the car's payload by a corresponding weight. For more detailed infor- mation on weights, see page 374.

The tailgate is opened via a button on the lighting panel or the remote con-

trol key, see page 57.

WARNING

The car's driving characteristics change depending on the weight and distribution of the load.

To bear in mind when loading

Position the load firmly against the rear seat's backrest.

Note that objects must not prevent the function of the WHIPS system for the front seats if any of the rear seat's backrests is folded down,see page 27.

Centre the load.

Heavy objects should be placed as low as possible. Avoid placing heavy loads on lowered backrests.

Cover sharp edges with something soft to avoid damaging the upholstery.

Secure all loads to the load retaining eye- lets with straps or web lashings.

WARNING

A loose object weighing 20 kg can, in a frontal collision at a speed of 50 km/h, carry the impact of an item weighing 1000 kg.

WARNING

The protection provided by the inflatable curtain in the headlining may be compro- mised or eliminated by high loads.

Never load cargo above the backrest.

WARNING

Always secure the load. During heavy brak- ing the load may otherwise shift, causing injury to the car's occupants.

Cover sharp edges and sharp corners with something soft.

Switch off the engine and apply the parking brake when loading/unloading long items. Otherwise you may accidentally knock the gear lever or gear selector with the load into a drive position - and the car could then move off.

Front seat

The passenger seat backrest can also be folded for an extra long load, see page 80.

Roof load

Using load carriers

To avoid damaging the car and for maximum possible safety while driving, the load carriers designed by Volvo are recommended.

Carefully follow the installation instructions supplied with the carriers.

Check periodically that the load carriers and load are properly secured. Lash the load securely with retaining straps.

Distribute the load evenly over the load carriers. Put the heaviest objects at the bottom.

The size of the area exposed to the wind, and therefore fuel consumption, increase with the size of the load.

Drive gently. Avoid quick acceleration, heavy braking and hard cornering.

WARNING

The car's centre of gravity and driving cha- racteristics are altered by roof loads. For information on maximum permitted roof load, including load carriers and any space box, see page 374.

07 During your journey

Loading

07

300 * Option/accessory, for more information, see Introduction.

Lowering the rear seat backrest

To simplify loading in the cargo area, the rear seat backrest can be folded down, see page 82.

Load retaining eyelets

The folding load retaining eyelets are used to fasten straps in order to anchor items in the cargo area.

WARNING

Hard, sharp and/or heavy objects that are loose or protrude could cause injury during heavy braking.

Always secure large and heavy objects with a seatbelt or cargo retaining straps.

Bag holder*

G 01

77 45

Bag holder under folding hatch in the floor.

1. Fold up the holder, which is part of the floor hatch.

2. Fasten the bags with strap and secure the carrying handle in the hooks.

12 V electrical socket*

Lower the cover to access the electrical socket.

The socket also provides voltage when the remote control key is not in the ignition switch.

IMPORTANT

Max. power takeoff is 10 A (120 W).

NOTE

Remember that using the electrical socket with the engine switched off involves the risk of discharging the car's battery.

07 During your journey

Loading

07

301

NOTE

The compressor for temporary emergency puncture repair has been tested and approved by Volvo. For information on the use of Volvo's recommended temporary emergency puncture repair (TMK), see page 325.

07 During your journey

Cargo area

07

302

Safety net

G 03

42 13

The safety net is fitted into four mounting points.

A safety net prevents loads or pets from being thrown forward in the passenger compartment in the event of sudden braking. For safety rea- sons, the safety net must always be correctly fastened and secured.

The net is made of a strong nylon fabric and can be secured two different locations in the car:

Rear fitting - Behind the rear seat backrest

Front fitting - Behind the front seat back- rests.

WARNING

Loads in the cargo area must be firmly secured, even if the safety net is correctly fitted.

Attaching

NOTE

The safety net is most easily fitted via one of the rear doors.

WARNING

Make sure that the upper mountings of the safety net are correctly fitted and that the anchoring straps are securely fastened.

Do not use a damaged net.

1. Unfold the safety net and make sure that the split upper rod is locked in extended position.

2. Hook one end of the rod into the front or rear roof mounting with the anchoring strap locks turned towards you.

3. Hook the other end of the rod into the roof mounting on the opposite side - the tele- scopic spring-loaded retaining hooks facil- itate alignment.

Take care to press forward the rod's retain- ing hooks for each respective roof moun- ting's front end position.

Rear fitting.

4. Rear fitting: With the net fitted in the rear roof mountings, hook the safety net's anchoring straps into the front floor eyes in the cargo area.

07 During your journey

Cargo area

07

* Option/accessory, for more information, see Introduction. 303

Front fitting.

Front fitting: With the net fitted in the front roof mountings, hook the safety net's anchoring straps into the eyes on the rear of the seat slide rails - it is easier if the backrests are straightened and the seats are moved forward slightly.

Pay attention to make sure that you do not press the seat/backrest hard against the net when the seat/backrest is moved back again - only adjust until the seat/backrest makes contact with the net.

IMPORTANT

If the seat/backrest is pressed hard back- wards against the safety net then the net and/or its roof mountings could be dam- aged.

5. Tension the safety net with the anchoring straps.

Removal and storage

The safety net can be easily removed and folded up.

Release the tension in the net by pressing in the button on the anchoring strap's lock and feeding out part of the strap.

Press in the catch and detach both of the anchoring strap's hooks.

Break the rod in the centre, fold it together and roll up the net.

The folded safety net can be stored under the cargo compartment floor.

Safety grille*

G 03

19 78

A safety grille prevents loads or pets from being thrown forward in the passenger com- partment in the event of sudden braking.

Folding up

Take hold of the bottom of the safety grille and pull back/up.

IMPORTANT

The safety grille cannot be folded up or down when a cargo cover is fitted.

07 During your journey

Cargo area

07

304 * Option/accessory, for more information, see Introduction.

Fitting/removal

The safety grille is normally permanently instal- led in the car because it can easily be folded up in the roof and so be out of the way if a longer cargo area is required. However, if desired, the safety grille can be dismantled and removed from the car.

For information about the tools required and methods for fitting/removal, see the installation instructions1 that were included with the initial purchase.

For safety reasons, the safety grille must always be correctly fastened and secured when being refitted.

Cargo cover*

G 03

19 77

Pull the cargo cover over the load and hook it into the recesses at the cargo area's rear posts.

IMPORTANT

The safety grille cannot be folded up or down when the cargo cover is fitted.

Attaching the cargo cover

Move one end piece of the cover into the recess on the side panel.

Move the other end piece into the corres- ponding recess.

Press both sides in. A "click" should be audible and the red marking should disap- pear. > Check that both end pieces are locked.

Removing the cargo cover

1. Press in one end piece button and lift it out.

2. Carefully angle the cover up/out and the other end piece loosens automatically.

Lowering the cargo cover's rear sealing

disc

In its rolled-in position, the cargo cover's rear sealing disc protrudes horizontally into the cargo area when it is fitted.

Pull the sealing disc back gently, free from its support shelves, and lower.

1 Installation instructions no. 30715972.

07 During your journey

Driving with a trailer

07

* Option/accessory, for more information, see Introduction. 305

General

Payload depends on the car's kerb weight. The total of the weight of the passengers and all accessories, e.g. towbar, reduces the car's payload by a corresponding weight. For more detailed information on weights, see page 374.

If the towing bracket is mounted by Volvo, then the car is delivered with the necessary equip- ment for driving with a trailer.

The car's towing bracket must be of an approved type.

If the towbar is retrofitted, check with your Volvo dealer that the car is fully equipped for driving with a trailer.

Distribute the load on the trailer so that the weight on the towing bracket complies with the specified maximum towball load.

Increase the tyre pressure to the recom- mended pressure for a full load. For tyre pressure label location, see page 323.

The engine is loaded more heavily than usual when driving with a trailer.

Do not tow a heavy trailer when the car is brand new. Wait until it has been driven at least 1000 km.

The brakes are loaded much more than usual on long and steep downhill slopes. Downshift to a lower gear and adjust your speed.

For safety reasons, the maximum permit- ted speed for the car when coupled with a trailer should not be exceeded. Follow the regulations in force for the permitted speeds and weights.

Maintain a low speed when driving with a trailer up long, steep ascents.

Avoid driving with a trailer on inclines of more than 12%.

Trailer cable

An adapter is required if the car's towing bracket has 13 pin electrics and the trailer has 7 pin electrics. Use an adapter cable approved by Volvo. Make sure the cable does not drag on the ground.

Direction indicators and brake lights on

the trailer

If any of the trailer's lamps for direction indica- tors are broken, then the combined instrument panel's symbol for direction indicators flashes faster than normal and the display shows the text Bulb fail - Ind. signal trailer.

If any of the trailer's lamps for the brake light are broken then the Bulb fail - Stop lamp

trailer text is shown.

Level control*

The rear shock absorbers maintain a constant height irrespective of the car's load (up to the maximum permissible weight). When the car is

stationary the rear of the car lowers slightly, which is normal.

Trailer weights

For information on Volvo's permitted trailer weights, see page 375.

NOTE

The stated maximum permitted trailer weights are those permitted by Volvo. National vehicle regulations can further limit trailer weights and speeds. Towbars can be certified for higher towing weights than the car can actually tow.

WARNING

Follow the stated recommendations for trailer weights. Otherwise, the car and trailer may be difficult to control in the event of sudden movement and braking.

Manual gearbox

Overheating

When driving with a trailer in hilly terrain in a hot climate there may be a risk of overheating.

Do not run the engine at higher revolutions than 4500 rpm (diesel engines: 3500 rpm) - otherwise the oil temperature may become too high.

07 During your journey

Driving with a trailer

07

306

Diesel engine 5-cyl

In the event of a risk of overheating the optimal speed for the engine is 2300-3000 rpm for optimal circulation of the coolant.

Automatic gearbox

Overheating

When driving with a trailer in hilly terrain in a hot climate there may be a risk of overheating.

An automatic gearbox selects the optimum gear related to load and engine speed.

In the event of overheating a warning sym- bol illuminates on the instrument panel combined with a text message - follow the recommendation given.

Steep inclines

Do not lock the automatic transmission in a higher gear than the engine "can cope with" - it is not always a good idea to drive at a high gear with low engine revolutions.

IMPORTANT

See also the specific information on slow driving with trailer for cars with the Powershift automatic transmission on page 124.

Parking on a hill

1. Depress the foot brake.

2. Activate the parking brake.

3. Move the gear selector to position P.

4. Release the foot brake.

Move the gear selector to park position P when parking an automatic car with a hitched trailer. Always use the parking brake.

Block the wheels with chocks when park- ing a car with hitched trailer on a hill.

Starting on a hill

1. Depress the foot brake.

2. Move the gear selector to driving posi- tion D.

3. Release the parking brake.

4. Release the foot brake and start driving off.

Towing bracket

If the car is equipped with a detachable towbar, the installation instructions for the loose sec- tion must be followed carefully, see page 308.

WARNING

If the car is fitted with a Volvo detachable towbar:

Follow the installation instructions care- fully.

The detachable section must be locked with the key before setting off.

Check that the indicator window shows green.

Important checks

The towbar's towball must be cleaned and greased regularly.

NOTE

If a towball hitch with vibration damper is used, it is not necessary to grease the tow- ball.

07 During your journey

Driving with a trailer

07

307

Storing the detachable towbar

G 03

17 13

Towbar storage space.

IMPORTANT

Always remove the towbar after use and store it in the appointed location in the car, firmly fastened with its strap.

Specifications

G 02

14 85

Dimensions, mounting points (mm)

A 1013

B 69

C 855

D 428

E 109

F 296

G Side member

H Ball centre

07 During your journey

Driving with a trailer

07

308

Attaching the towbar

G 01

89 28

Remove the protective cover by first press- ing in the catch and then pulling the cover straight back .

G 02

14 87

Ensure that the mechanism is in the unlocked position by turning the key clock- wise.

G 02

14 88

The indicator window must show red.

G 02

14 89

Insert the towbar until you hear a click.

G 02

14 90

The indicator window must show green.

G 00

00 00

Turn the key anticlockwise to locked posi- tion. Remove the key from the lock.

07 During your journey

Driving with a trailer

07

309

G 02

14 94

Check that the towbar is secure by pulling it up, down and back.

WARNING

If the towbar is not fitted correctly then it must be detached and reattached in accordance with the previous instructions.

IMPORTANT

Only grease in the ball for the towing hitch, the remainder of the towbar should be clean and dry.

G 02

14 95

Safety cable.

WARNING

Be sure to attach the trailer's safety cable to the correct place.

Removing the towbar

Insert the key and turn it clockwise to the unlocked position.

Push in the locking wheel and turn it anticlockwise until you hear a click.

Turn the locking wheel down fully, until it comes to a stop. Hold it in this position while pulling the towbar rearward and upward.

WARNING

Secure the towbar safely if it is stored in the car, see page 307.

07 During your journey

Driving with a trailer

07

310 * Option/accessory, for more information, see Introduction.

G 01

89 29

Push the protective cover until it snaps tight.

Trailer Stability Assist - TSA*

The TSA system (Trailer Stability Assist) serves to stabilise the car and trailer combination if it begins to snake.

The TSA function is part of the DSTC system (Dynamic Stability and Traction Control), see page 146.

Function

The snaking phenomenon can occur with any car/trailer combination. Normally, snaking occurs at extremely high speeds. But, there is a risk of it occurring at lower speeds (70-90 km/h) if the trailer is overloaded or the load is improperly distributed, e.g. too far back.

In order for snaking to occur, there must be a triggering factor, e.g.:

Car with trailer subjected to a sudden and powerful side wind.

Car with trailer drives on an uneven road surface or in a pothole.

Sweeping steering wheel movements.

Operation

If snaking has started, it could be difficult or even impossible to suppress. This makes the car/trailer combination difficult to control and there is a risk that you could, for example, end up in the wrong lane or leave the carriageway.

TSA system continually monitors car move- ments, particularly lateral movements. If snak- ing is detected, the front wheels are individually braked. This serves to stabilise the car/trailer combination. This is often enough to help the driver regain control of the car.

If snaking is not eliminated the first time the TSA system comes into action, the car/trailer combination is braked with all wheels and engine power is reduced. Once snaking has been gradually suppressed and the car/trailer combination is once again stable, the TSA sys- tem stops regulating and the driver once again has full control of the car.

Miscellaneous

The TSA system can engage within the speed interval 60 to 160 km/h.

NOTE

TSA function is switched off if the driver selects Sport mode, see page 146.

TSA may fail to engage if the driver uses severe steering wheel movements to try to rectify the snaking because in such a situation the TSA system cannot determine whether it is the trailer or the driver that is causing the snaking.

The DSTC symbol in the combined instrument panel flashes when the

TSA is working.

07 During your journey

Towing and recovery

07

311

Towing

Find out the statutory maximum speed limit for towing before towing begins.

1. Unlock the steering lock by inserting the remote control key in the ignition switch and giving a long press on the START/

STOP ENGINE button - key position II is activated, see page 78 for more informa- tion on key positions.

2. The remote control key must remain in the ignition switch while the car is being towed.

3. Keep the towline taut when the towing vehicle reduces speed by holding your foot gently pressed on the brake pedal - thereby avoiding unnecessary jerking.

4. Be prepared to brake to stop.

WARNING

Check that the steering lock is unlocked before towing.

The remote control key must be in key position II - in position I all airbags are deactivated.

Never remove the remote control key from the ignition switch when the car is being towed.

WARNING

The brake servo and power steering do not work when the engine is switched off - the brake pedal needs to be depressed about 5 times more heavily and the steering is considerably heavier than normal.

Manual gearbox

Prior to towing:

Move gear lever into neutral and release the parking brake.

Automatic gearbox Geartronic

IMPORTANT

Note that the car must always be towed with the wheels rolling forward.

Cars with automatic gearbox must not be towed at speeds above 80 km/h or further than 80 km.

Prior to towing:

Move the gear selector to position N and release the parking brake.

Automatic gearbox Powershift

The model with Powershift transmission should not be towed as it is dependent on the engine running in order to receive sufficient

lubrication. If towing still has to take place, the route must be as short as possible and then with very low speed.

In the event of uncertainty as to whether or not the car is equipped with Powershift transmis- sion, this can be verified by checking the des- ignation on the transmission's label under the bonnet - see page 372. The designa- tion MPS6 means that it is Powershift trans- mission otherwise it is Geartronic automatic transmission.

IMPORTANT

Avoid towing.

However, the car can be towed for a short distance at low speed to move it from a dangerous position - not further than 10 km and not faster than 10 km/h. Note that the car must always be towed with the wheels rolling for- ward.

In the event of moving a longer distance than 10 km, the car must be transported with the drive wheels raised from the road - professional recovery is recom- mended.

Prior to towing:

Move the gear selector to position N and release the parking brake.

07 During your journey

Towing and recovery

07

312

Jump starting

Do not tow the car to bump start the engine. Use a donor battery if the battery is discharged and the engine does not start, see page 119.

IMPORTANT

The catalytic converter may be damaged during attempts to tow-start the engine.

Towing eye

The towing eye is screwed into a threaded socket behind a cover on the right-hand side of the bumper, front or rear.

Attaching the towing eye

Take out the towing eye that is located under the floor hatch in the cargo area - in some cases it may be hidden under the sill.

The cover for the towing eye's attachment point is available in two variants which must be opened in different ways:

Open the variant with a recess using a coin or similar inserted in the recess, turning it outwards. Then turn out the cover completely and remove it.

The second variant has a marking along one side or in a corner: Press the mark- ing with a finger and fold out the oppo- site side/corner at the same time using a coin or similar - the cover turns around its axis and can then be removed.

Screw the towing eye right in up to its flange. Turn in the towing eye firmly e.g. using the wheel wrench.

After use, unscrew the towing eye and return it to its place.

Finish by refitting the cover onto the bumper.

IMPORTANT

The towing eye is only designed for towing on roads - not for pulling the car unstuck or out of a ditch. Call a recovery service for recovery assistance.

NOTE

On certain cars with towbar fitted the towing eye cannot be attached in the rear bracket. Attach the towrope in the towbar.

For this reason it is advisable to store the detachable towbar's towball in the car.

07 During your journey

Towing and recovery

07

313

Recovery

Call a recovery service for recovery assistance.

IMPORTANT

Note that the car must always be transpor- ted with the wheels rolling forward.

An All Wheel Drive car (AWD) with raised front suspension must not be towed at speeds above 70 km/h. It should not be towed further than 50 km.

314 * Option/accessory, for more information, see Introduction.

General ................................................................................................. 316 Changing wheels .................................................................................. 320 Tyre pressure ....................................................................................... 323 Warning triangle and first-aid kit*.......................................................... 324 Emergency puncture repair (TMK)* ...................................................... 325

WHEELS AND TYRES

08 Wheels and tyres

General

08

316

Driving characteristics

Tyres greatly affect the car's driving characte- ristics. The type of tyre, dimensions, tyre pres- sure and speed rating are important for how the car performs.

Direction of rotation

G 02

17 78

The arrow shows the tyre's direction of rotation.

Tyres with a tread pattern which are designed to only turn in one direction have the direction of rotation marked with an arrow. The tyre must always rotate in the same direction throughout its lifespan. Tyres should only be switched between front and rear positions, never between left and right-hand sides, or vice versa. If the tyres are fitted incorrectly, the car's braking characteristics and capacity to force rain and slush out of the way are adversely affected.

Tyres with the greatest tread depth should always be fitted to the rear of the car (to decrease the risk of skidding).

NOTE

Ensure that tyres of the same type and dimensions, and also the same make, are fitted to all four wheels.

Follow the recommended tyre pressures specified in the tyre pressure table, see page 385.

Tyre care

Tyre age

All tyres older than 6 years old should be checked by an expert even if they seem undamaged. Tyres age and decompose, even if they are hardly ever or never used. The func- tion can therefore be affected. This applies to all tyres that are stored for future use. Exam- ples of external signs which indicate that the tyre is unsuitable for use are cracks or discol- oration.

New tyres

Tyres are perishable. After a few years they begin to harden at the same time as the friction capacity/characteristics gradually deteriorate. For this reason, aim to get as fresh tyres as possible when you replace them. This is espe- cially important with regard to winter tyres. The last four digits in the sequence mean the week and year of manufacture. This is the tyre's DOT marking (Department of Transportation), and this is stated with four digits, for example 1510. The tyre in the illustration was manufac- tured in week 15 of 2010.

Summer and winter tyres

When summer and winter wheels are changed the wheels should be marked with which side of the car they were mounted on, for example L for left and R for right.

08 Wheels and tyres

General

08

* Option/accessory, for more information, see Introduction. 317

Wear and maintenance

The correct tyre pressure results in more even wear, see page 323. Driving style, tyre pres- sure, climate and road condition affect how quickly your tyres age and wear. To avoid dif- ferences in tread depth and to prevent wear patterns arising, the front and rear wheels can be switched with each other. A suitable dis- tance for the first change is approx. 5000 km and then at 10 000 km intervals. Volvo recom- mends that you contact an authorised Volvo workshop for checking if you are uncertain about tread depth. If significant differences in wear (>1 mm difference in tread depth) between tyres have already occurred, the least worn tyres must always be placed on the rear. Understeer is normally easier to correct than oversteer, and leads to the car continuing for- wards in a straight line rather than having the rear end skidding to one side, resulting in pos- sible complete loss of control over the car. This is why it is important for the rear wheels never to lose grip before the front wheels.

Wheels should be stored lying down or hanging up - and not standing up.

WARNING

A damaged tyre can lead to loss of control of the car.

Tyres with tread wear indicators

G 02

18 29

Tread wear indicators.

Tread wear indicators are narrow treadless bands across the width of the tread. On the side of the tyre are the letters TWI (Tread Wear Indicator). When the tyre's tread depth is down to 1.6 mm, the tread depth will be level in height with the tread wear indicators. Change to new tyres as soon as possible. Remember that tyres with little tread depth provide very poor grip in rain and snow.

Rims and wheel bolts

IMPORTANT

The wheel bolts must be tightened to 140 Nm. Overtightening can damage the nuts and the bolts.

Only use rims that are tested and approved by Volvo and which are Volvo genuine accesso- ries. Check the torque with a torque wrench.

Locking wheel bolts*

Locking wheel bolts* can be used on both alu- minium and steel rims. Under the cargo area floor there is space for the sleeve for the lock- able wheel bolts.

Tools

Located under the cargo area floor are the car's towing eye, jack* and wheel wrench*. There is also space for the sleeve for the lock- able wheel bolts.

08 Wheels and tyres

General

08

318 * Option/accessory, for more information, see Introduction.

Jack*

The original jack should only be used for changing to the spare wheel. The jack's thread must always be well greased.

Tools - returning into place

G 02

93 36

The tools and jack* must be returned to their correct places after use. The jack needs to be cranked together to the correct position in order to have space.

The foam block and spare wheel are replaced in the reverse order to taking out.

Note that there is an arrow on the upper foam block. It must point forwards in the car.

IMPORTANT

The tools and jack* must be stored in the intended location in the car's cargo area when not in use.

Winter tyres

Volvo recommends winter tyres with particular dimensions. Tyre dimensions are dependent on engine variant. When driving on winter tyres, the correct type of tyres must be fitted to all four wheels.

NOTE

Volvo recommends that you consult a Volvo dealer about which wheel rim and tyre types are most suitable.

Studded tyres

Studded winter tyres should be run in gently for 500-1000 km so the studs settle properly into the tyres. This gives the tyre, and especially the studs, a longer service life.

NOTE

The legal provisions for the use of studded tyres vary from country to country.

Tread depth

Road conditions with ice, slush and low tem- peratures place considerably higher demands on tyres than summer conditions. Volvo there- fore recommends not to drive on winter tyres that have a tread depth of less than 4 millime- tres.

Using snow chains

Snow chains may only be used on the front wheels (also applies to all-wheel drive cars).

Never drive faster than 50 km/h with snow chains. Avoid driving on bare ground as this wears out both the snow chains and tyres.

WARNING

Use Volvo genuine snow chains or equiva- lent chains designed for the car model, and tyre and rim dimensions. In the event of uncertainty Volvo recommends that you consult an authorised Volvo workshop. The wrong snow chains may cause serious damage to your car and lead to an accident.

IMPORTANT

Only single-sided snow chains are permit- ted. Use Volvo genuine snow chains or sim- ilar that are properly suited to the car model, tyre size and wheel rim size. In the event of uncertainty Volvo recommends that you consult an authorised Volvo workshop.

08 Wheels and tyres

General

08

319

Specifications

The car has whole vehicle approval. This means that certain combinations of wheels and tyres are approved. For the permissible com- binations, see page 385

Wheel (rim) dimensions

Wheels (rims) have a designation of dimen- sions, for example: 7Jx16x50.

7 Rim width in inches

J Rim flange profile

16 Rim diameter in inches

50 Off-set in mm (dis- tance from wheel centre to wheel con- tact surface against the hub)

Tyre dimensions

The dimensions are stated on all car tyres. Example of designation:

235/60 R18 103 V.

235 Tyre width (mm)

60 Ratio between tyre wall height and tyre width (%)

R Radial ply

18 Rim diameter in inches

103 Codes for the maximum permitted tyre load, tyre load index (LI)

V Speed rating for maximum permitted speed, speed rating (SS). (In this case 240 km/h).

Load index

Each tyre has a certain capacity to carry a load, a load index (LI). The car's weight determines the load capacity required of the tyres. Mini- mum permitted index is specified in the table, see page 385.

Speed ratings

Each tyre can withstand a certain maximum speed, a speed rating (Speed Symbol; SS).

Tyre speed class must at least correspond with the car's top speed. Minimum permitted speed rating is specified in the table, see page 385.

The only exception to these conditions is win- ter tyres (both those with metal studs and those without), where a lower speed rating may be used. If such a tyre is chosen, the car must not be driven faster than the speed rating of the tyre (for example, class Q can be driven at a maximum of 160 km/h).

Traffic regulations determine how fast a car can be driven, not the speed rating of the tyres.

NOTE

It is the maximum permitted speed that is stated in the table.

Q 160 km/h (used only on winter tyres)

T 190 km/h

H 210 km/h

V 240 km/h

W 270 km/h

Y 300 km/h

WARNING

The car must be fitted with tyres which have the same or a higher load index (LI) and speed rating (SS) than specified. If a tyre with too low a load index or speed rating is used, it may overheat.

08 Wheels and tyres

Changing wheels

08

320 * Option/accessory, for more information, see Introduction.

Spare wheel*

The spare wheel (Temporary spare) is only intended for use temporarily and must be replaced by an ordinary wheel as soon as pos- sible. The car's handling may be altered by the use of the spare wheel. The spare wheel is smaller than the normal wheel. The car's ground clearance is affected accordingly. Pay attention to high kerbs and do not machine wash the car. If the spare wheel is fitted on the front axle, you cannot use snow chains at the same time. On all-wheel drive cars the drive on the rear axle can be disconnected. The spare wheel must not be repaired. The correct tyre pressure for the spare wheel is stated in the tyre pressure table, see page 385.

IMPORTANT

Never drive faster than 80 km/h with a spare wheel on the car.

IMPORTANT

The car must never be driven fitted with more than one temporary spare wheel.

The spare wheel is located in the spare wheel well with the outside down. The same bolt runs through to secure the spare wheel and the

foam block. The foam block contains all the tools.

Taking out the spare wheel

1. Fold up the cargo area floor, from the rear and forwards.

2. Undo the retaining screw.

3. Lift out the foam block with its tools.

4. Lift out the spare wheel.

Removing

Set up the warning triangle, see page 324 if a wheel must be replaced at a busy location. The car and jack* must be on a firm horizontal sur- face.

1. Apply the parking brake and engage reverse gear, or position P if the car has an automatic gearbox.

WARNING

Check that the jack is not damaged, that the threads are thoroughly lubricated and that it is free from dirt.

NOTE

Volvo recommends only using the jack* that belongs to the car model in question, which is indicated on the jack's label.

The label also indicates the jack's maximum lift capacity at a specified minimum lifting height.

2. Take out the jack*, wheel wrench* and removal tool for wheel covers* located under the cargo floor in the cargo area. If another jack is selected, see page 332.

3. Place chocks in front of and behind the wheels which will remain on the ground. Use heavy wooden blocks or large stones for example.

4. Screw together the towing eye with the wheel wrench* until the stop position as illustrated below.

08 Wheels and tyres

Changing wheels

08

321

IMPORTANT

The towing eye must be screwed into all threads in the wheel bolt wrench.

5. Loosen the wheel bolts -1 turn anticlock- wise with the wheel wrench.

WARNING

Never position anything between the ground and the jack, nor between the jack and the car's jacking point.

6. There are two jacking points on each side of the car. There is a recess in the plastic cover at each point. Crank the foot of the

jack down so it is pressed squarely on the ground.

IMPORTANT

The ground must be firm, smooth and level.

7.

Check that the jack sits in the anchorage as illustrated and that the foot is positioned vertically under the anchorage.

IMPORTANT

The jack mounting point is the rearmost of the two rear recesses.

8. Lift the car so that the wheel is free. Remove the wheel bolts and lift off the wheel.

Installation

1. Clean the contact surfaces between wheel and hub.

08 Wheels and tyres

Changing wheels

08

322

2. Put on the wheel. Tighten the wheel bolts thoroughly.

3. Lower the car so that the wheels cannot rotate.

4. Tighten the wheel bolts crosswise. It is important that the wheel bolts are tight- ened properly. Tighten to 140 Nm. Check the torque with a torque wrench.

5. Refit any full wheel covers.

NOTE

The wheel cover outlet for the valve must be positioned over the valve on the wheel rim during fitting.

WARNING

Never crawl under the car when it is raised on the jack.

Passengers must leave the car when it is raised on the jack.

Park the car so that passengers have the car - or preferably a crash barrier - between them and the road.

NOTE

The car's regular jack is designed only for use occasionally and for a short time, such as when changing a wheel with a punctured tyre, switching between summer tyres and winter tyres, etc. Only the jack belonging to the specific model is to be used to jack up the car. If the car is to be jacked up more often, or for a longer time than is required just to change a wheel, use of a garage jack is recommended. In this instance, follow the instructions for use that come with the equipment.

08 Wheels and tyres

Tyre pressure

08

323

Tyre pressure

G 02

18 30

The tyre pressure decal on the driver's side door pillar (between frame and rear door) shows which pressures the tyres should have at different loads and speed conditions. This is also specified in the tyre pressure table, see page 385.

Tyre pressure for the car's recommended tyre dimension

ECO pressure1

Spare wheel tyre pressure (Temporary Spare)

NOTE

Temperature differences change the tyre pressure.

Fuel economy, ECO pressure

At speeds under 160 km/h, the general tyre pressure is recommended (applies for both full load and light load) in order to obtain optimum fuel economy.

Checking the tyre pressure

The tyre pressures must be checked every month.

This also applies to the car's spare wheel.

Check tyre pressures on cold tyres. "Cold tyres" means the tyres are the same tempera- ture as the ambient temperature. After several kilometres of driving, the tyres warm up and the pressure increases.

Inadequate tyre pressure increases fuel con- sumption, shortens tyre lifespan and impairs the car's roadholding. Driving on tyres with tyre pressure that is too low could result in the tyres overheating and being damaged. Tyre pres- sure affects travelling comfort, road noise and steering characteristics.

NOTE

Tyre pressure decreases over time, this is a natural phenomenon. Tyre pressure also varies depending on ambient temperature.

1 ECO pressure results in improved fuel economy.

08 Wheels and tyres

Warning triangle and first-aid kit*

08

324 * Option/accessory, for more information, see Introduction.

Warning triangle Lift the floor hatch and take out the warning triangle.

Take the warning triangle from the case, fold out and assemble the two loose sides.

Fold out the warning triangle's support legs.

Follow the regulations for the use of a warning triangle. Position the warning triangle in a suit- able place with regard to traffic.

Ensure the warning triangle and its case are properly secured in the cargo area after use.

First aid kit*

A case with first aid equipment is located under the floor in the cargo area.

08 Wheels and tyres

Emergency puncture repair (TMK)*

08

* Option/accessory, for more information, see Introduction. 325

General

Emergency puncture repair (TMK; Temporary Mobility Kit) is used to seal a puncture and check and adjust tyre pressure. It consists of a compressor and a bottle with sealing fluid. The kit works as a temporary repair. The sealing fluid bottle must be replaced before its expira- tion date and after use.

The sealing fluid effectively seals tyres punc- tured in the tread.

NOTE

The emergency puncture repair kit is only intended for sealing tyres with a puncture in the tread.

The emergency puncture repair kit has limited capacity to seal tyres which have punctures in

the wall. Do not seal tyres with the emergency puncture repair kit if they have larger slits, cracks or similar damage.

Connect the compressor to one of the car's 12 V sockets, see pages 227 and 300. Choose the electrical socket that is nearest the punctured tyre.

IMPORTANT

If the compressor for emergency puncture repair is connected to one of the two sock- ets in the tunnel console, see page 227, no other current consumer must be connected to the other one.

NOTE

The compressor for temporary emergency puncture repair has been tested and approved by Volvo.

Location of the emergency puncture

repair kit

Set up the warning triangle if a tyre is being sealed in a trafficked location. The emergency puncture repair kit is located under the floor in the cargo area, see page 324.

WARNING

You should not drive faster than 80 km/h after the emergency tyre repair kit has been used. Volvo recommends that you visit an authorised Volvo workshop for inspection of the sealed tyre (maximum driving distance is 200 km). The staff there can determine whether or not the tyre can be repaired or if it needs to be replaced.

Overview

Label, maximum permitted speed

Switch

Cable

Bottle holder (orange cap)

Protective cap

08 Wheels and tyres

Emergency puncture repair (TMK)*

08

326 * Option/accessory, for more information, see Introduction.

Pressure reducing valve

Air hose

Sealing fluid bottle

Pressure gauge

Sealing punctured tyres

G 01

43 38

For information on the function of the parts, see preceding illustration.

1. Open the lid of the emergency puncture repair kit.

2. Detach the label for maximum permitted speed and affix it to the steering wheel.

WARNING

The sealing fluid can irritate the skin. In the case of contact with skin, wash away the fluid with soap and water.

3. Check that the switch is in position 0 and locate the cable and the air hose.

NOTE

Do not break the bottle's seal before use. The seal is broken automatically when the bottle is screwed in.

4. Unscrew the orange cap and unscrew the bottle's stopper.

5. Screw the bottle into its holder.

WARNING

Do not unscrew the bottle, it is equipped with a reverse catch to prevent leakage.

6. Unscrew the wheel's dust cap and screw in the air hose valve connection to the bot- tom of the thread on the tyre's air valve.

7. Plug the cable into the 12 V socket and start the car.

08 Wheels and tyres

Emergency puncture repair (TMK)*

08

* Option/accessory, for more information, see Introduction. 327

NOTE

If the compressor is connected to one of the two 12 V sockets, in the tunnel console, no other current consumer must be connected to the other one.

WARNING

Do not leave children in the car without supervision when the engine is running.

8. Flick the switch to position I.

WARNING

Never stand next to the tyre when the com- pressor is running. If cracks or unevenness arise then the compressor must be switched off immediately. The journey should not be continued. Contacting an authorised tyre centre is recommended.

NOTE

When the compressor starts, the pressure can increase up to 6 bar but the pressure drops after approximately 30 seconds.

9. Inflate the tyre for 7 minutes.

IMPORTANT

Risk of overheating. The compressor must not run for more than 10 minutes.

10. Switch off the compressor to check the pressure on the pressure gauge. Minimum pressure is 1.8 bar and maximum 3.5 bar. (Release air with the pressure reducing valve if the tyre pressure is too high.)

WARNING

If the pressure is below 1.8 bar then the hole in the tyre is too big. The journey should not be continued. Contacting an authorised tyre centre is recommended.

11. Switch off the compressor and unplug the cable from the 12 V socket.

12. Detach the hose from the tyre valve and fit the valve cap.

13. As soon as possible, drive approximately 3 km at a maximum speed of 80 km/h so that the sealing fluid can seal the tyre.

Rechecking the repair and pressure

1. Reconnect the equipment.

2. Read the tyre pressure on the pressure gauge.

If it is below 1.3 bar then the tyre is insufficiently sealed. The journey should not be continued. Contact a tyre centre.

If the tyre pressure is higher than 1.3 bar, the tyre must be inflated to the pres- sure specified in accordance with the tyre pressure table, see page 385 (1 bar=100 kPa). Release air using the pressure reducing valve if the tyre pres- sure is too high.

WARNING

Do not unscrew the bottle, it is equipped with a reverse catch to prevent leakage.

3. Make sure the compressor is switched off. Detach the air hose and cable. Refit the dust cap.

NOTE

The sealing fluid bottle and the hose must be replaced after use. Volvo recommends that this replacement is performed by an authorised Volvo workshop.

08 Wheels and tyres

Emergency puncture repair (TMK)*

08

328 * Option/accessory, for more information, see Introduction.

WARNING

Check the tyre pressure regularly.

Volvo recommends that you drive to the near- est authorised Volvo workshop for the replace- ment/repair of the damaged tyre. Advise the workshop that the tyre contains sealing fluid.

WARNING

You should not drive faster than 80 km/h after the emergency tyre repair kit has been used. Volvo recommends that you visit an authorised Volvo workshop for inspection of the sealed tyre (maximum driving distance is 200 km). The staff there can determine whether or not the tyre can be repaired or if it needs to be replaced.

Inflating the tyres

The car's original tyres can be inflated by the compressor.

1. The compressor must be switched off. Make sure that the switch is in position 0 and locate the cable and air hose.

2. Unscrew the wheel's dust cap and screw in the air hose valve connection to the bot- tom of the thread on the tyre's air valve.

WARNING

Inhaling car exhaust fumes can result in danger to life. Never leave the engine run- ning in sealed areas or areas that lack suf- ficient ventilation.

WARNING

Do not leave children in the car without supervision when the engine is running.

3. Connect the cable to one of the car's 12 V sockets and start the car.

4. Start the compressor by flicking the switch to position I.

IMPORTANT

Risk of overheating. The compressor must not run for more than 10 minutes.

5. Inflate the tyre to the pressure specified in accordance with the tyre pressure table, see page 385. (Release air using the pres- sure reducing valve if the tyre pressure is too high.)

6. Switch off the compressor. Detach the air hose and cable.

7. Refit the dust cap.

Replacing the sealing fluid canister

Replace the bottle when the expiration date has passed. Treat the old bottle as environ- mentally hazardous waste.

WARNING

The bottle contains 1.2-Ethanol and natural rubber-latex.

Harmful if ingested. Could result in allergic reaction in the event of skin contact.

Avoid contact with the skin and eyes.

Store out of the reach of children.

08 Wheels and tyres

08

329

330

Engine compartment............................................................................. 332 Lamps................................................................................................... 339 Wiper blades and washer fluid.............................................................. 345 Battery................................................................................................... 348 Fuses..................................................................................................... 353 Car care................................................................................................ 364

MAINTENANCE AND SERVICE

09 Maintenance and service

Engine compartment 09

332

General

Volvo service programme

To keep the car as safe and reliable as possi- ble, follow the Volvo service programme as specified in the Service and Warranty Booklet. Volvo recommends engaging an authorised Volvo workshop to perform the service and maintenance work. Volvo workshops have the personnel, special tools and service literature to guarantee the highest quality of service.

IMPORTANT

For the Volvo warranty to apply, check and follow the instructions in the Service and Warranty Booklet.

Check regularly

Check the following oils and fluids at regular intervals, e.g. when refuelling:

Coolant

Engine oil

Power steering fluid

Washer fluid

WARNING

Remember that the radiator fan (located at the front of the engine compartment, behind the radiator) may start automatically some after the engine has been switched off.

Always have the engine cleaned by a work- shop. There is a risk of fire if the engine is hot.

Raising the car

NOTE

Volvo recommends only using the jack that belongs to the car model in question. If a jack is selected other than the one recom- mended by Volvo, follow the instructions for use supplied with the equipment.

If the car is raised with a workshop jack; posi- tion the jack against the front edge on the engine's subframe.

Do not damage the splashguard under the engine. Ensure that the workshop jack is posi- tioned so that the car cannot slide off the jack. Always use axle stands or similar.

If you raise the car using a two-pillar workshop lift, ensure that the front and rear lift arms are fixed under the lifting points. See preceding illustration.

Opening and closing the bonnet

09 Maintenance and service

Engine compartment 09

333

G 03

19 11

Pull the handle by the pedals. An informa- tion symbol lights when the bonnet is open, see page 72.

Move the catch to the left and open the bonnet. (The catch hook is located between the headlamp and grille, see illus- tration.)

WARNING

Check that the bonnet locks properly when closed.

Engine compartment, overview

The appearance of the engine compartment may vary depending on engine variant.

Coolant expansion tank

Power steering fluid reservoir

Engine oil dipstick1

Radiator

Filling engine oil

Reservoir for brake and clutch fluid (located on the driver's side)

Battery

Relay and fuse box

Filling washer fluid

Air filter

WARNING

The ignition system has very high voltage and output. The voltage in the ignition sys- tem is highly dangerous. The remote control key must always be in 0 position when work is being done in the engine compartment, see page 78.

Do not touch the spark plugs or ignition coil when the remote control key is in II position or when the engine is hot.

Checking the engine oil

1 Engines with electronic oil level sensor have no dipstick (5-cyl. diesel).

09 Maintenance and service

Engine compartment 09

334

Volvo recommends Castrol oil products.

When driving under adverse conditions, see page 378.

IMPORTANT

In order to fulfil the requirements for the engine's service intervals all engines are filled with a specially adapted synthetic engine oil at the factory. The choice of oil has been made very carefully with regard to service life, starting characteristics, fuel consumption and environmental impact.

An approved engine oil must be used in order that the recommended service inter- vals can be applied. Only use a prescribed grade of oil for both filling and oil change, otherwise you will risk affecting service life, starting characteristics, fuel consumption and environmental impact.

Volvo Car Corporation disclaims all war- ranty liability if engine oil of the prescribed grade and viscosity is not used.

Volvo recommends that oil changes are car- ried out at an authorised Volvo workshop.

Volvo uses different systems for warning of low/high oil level or low/high oil pressure. Cer- tain variants have an oil pressure sensor, and then the lamp for oil pressure is used. Other variants have an oil level sensor, and then the

driver is informed via the warning symbol in the centre of the instrument unit as well as by dis- play texts. Certain models have both variants. Contact a Volvo dealer for more information.

Change the engine oil and oil filter in accord- ance with the intervals specified in the Service and Warranty Booklet.

Using oil of a higher than specified grade is permitted. If the car is driven in adverse con- ditions, Volvo recommends using an oil of a higher grade, see page 378.

For capacities,see page 379 and onwards.

Engine with oil dipstick2

G 02

17 34

Dipstick and filler pipe.

Checking the oil level in a new car is especially important before the first scheduled oil change.

Volvo recommends checking the oil level every 2 500 km. The most accurate measurements are made on a cold engine before starting. The measurement will be inaccurate if taken imme- diately after the engine is switched off. The dipstick will indicate that the level is too low because the oil has not had time to flow down into the oil sump.

G 02

17 37

The oil level must be between the MIN and MAX marks.

Measurement and filling if required

1. Ensure that the car is level. After switching off the engine it is important to wait

2 Only applies to petrol and 4-cyl. diesel.

09 Maintenance and service

Engine compartment 09

335

5 minutes to allow the oil time to run back to the sump.

2. Pull up and wipe the dipstick.

3. Re-insert the dipstick.

4. Pull it out and check the level.

5. If the level is close to MIN then 0.5 litres should be added. If the level is significantly below, then an additional amount is required.

6. If required, check the level again, do it after driving a short distance. Then repeat steps 1 - 4.

WARNING

Never fill above the MAX mark. The level should never be above MAX or below MIN as this could lead to engine damage.

WARNING

Do not spill oil onto the hot exhaust manifold due to the risk of fire.

Engine with electronic oil level sensor3

Filler pipe.4

You do not need to take action with respect to the engine oil level before a message is shown in the display, see the illustration below.

Message and graph in the display.

Message

Engine oil level

The oil level is checked using the electronic oil level gauge with the thumbwheel when the engine is switched off,see page 198.

WARNING

If the message Oil service required is shown, visit a workshop. The oil level may be too high.

3 Only applies to 5-cyl. diesel. 4 Engines with electronic oil level sensor have no dipstick (5-cyl. diesel).

09 Maintenance and service

Engine compartment 09

336

IMPORTANT

In the event of the message Oil level low Refill 0.5 Ltr, only fill with 0.5 litres.

NOTE

The oil level is only detected by the system during driving. The system cannot directly detect changes when the oil is filled or drained. The car must be driven about 30 km before the oil level display is correct.

WARNING

Do not fill more oil if filling level (3) or (4) appears as shown in the illustration below. The level must never be above MAX or below MIN, as this could lead to engine damage.

WARNING

Do not spill oil onto the hot exhaust manifold due to the risk of fire.

Measuring the oil level

If the oil level needs to be checked then it should be carried out in accordance with the sequence below.

1. Activate key position II, see page 78.

2. Rotate the thumbwheel on the left-hand stalk switch to position Engine oil level

Wait.... > You will then see information displayed

about the engine oil level.

The figures 1-4 represent filling level. Do not fill more oil if filling level (3) or (4) is shown. Recom- mended filling level is 4.

Coolant

Checking the level and topping up

When topping up the coolant, follow the instructions on the packaging. It is important that the mixture of coolant concentrate and water is correct for the prevailing weather con- ditions. Never top up with water only. The risk of freezing increases with both too little and too much coolant concentrate.

WARNING

Coolant can be very hot. If the coolant requires topping up when the engine is at operating temperature, unscrew the expan- sion tank cap slowly to gently release the overpressure.

09 Maintenance and service

Engine compartment 09

337

For capacities and for standards regarding water quality, see page 380.

Check the coolant regularly

The level must lie between the MIN and MAX

marks on the expansion tank. If the system is not filled sufficiently, high temperatures could occur, causing a risk of damage to the engine.

IMPORTANT

A high content of chlorine, chlorides and other salts may cause corrosion in the cooling system.

Always use coolant with anti-corrosion agent as recommended by Volvo.

Ensure that the coolant mixture is 50% water and 50% coolant.

Mix the coolant with approved quality tap water. In the event of any doubt about water quality, used ready-mixed coolant in accordance with Volvo rec- ommendations.

When changing coolant/replacing cool- ing system components, flush the cool- ing system clean with approved quality tap water or flush with ready-mixed coolant.

The engine must only be run with a well- filled cooling system. Otherwise, tem- peratures that are too high may occur resulting in the risk of damage (cracks) in the cylinder head.

Brake and clutch fluid

Checking the level

Brake and clutch fluid have a common reser- voir. The level must be between the MIN and MAX marks that are visible inside the reservoir. Check the level regularly.

Change the brake fluid every other year or at every other regular service.

For capacities and recommended fluid grade, see page 380. The fluid should be changed annually on cars driven in conditions requiring hard, frequent braking, such as driving in mountains or tropical climates with high humidity.

WARNING

If the brake fluid is under the MIN level in the brake fluid reservoir, do not drive further before topping up the brake fluid. Volvo rec- ommends that the reason for the loss of brake fluid is investigated by an authorised Volvo workshop.

09 Maintenance and service

Engine compartment 09

338

Filling

The fluid reservoir is located on the driver's side.

The fluid reservoir is protected under the cover over the cold zone in the engine compartment. The round cover must be removed first before the reservoir cap can be reached.

1. Turn and open the cover located on the covering.

2. Unscrew the reservoir cap and fill the fluid. The level must be between the MIN and MAX marks, which are located on the inside of the reservoir.

IMPORTANT

Do not forget to refit the cap.

Power steering fluid

IMPORTANT

Keep the area around the power steering fluid reservoir clean when checking. The cover must not be opened.

Check the level frequently. The fluid does not require changing. The fluid level must be between the MIN and MAX marks. For capaci- ties and recommended fluid grade, see page 380.

NOTE

If a fault should arise in the power steering system or if the engine is switched off and the car must be towed, it can still be steered.

Air conditioning system

Troubleshooting and repair

The air conditioning system contains fluores- cent tracing agents. Use ultraviolet light when looking for leaks.

Volvo recommends that you contact an author- ised Volvo workshop.

WARNING

The air conditioning system contains pres- surised refrigerant R134a. This system must only be serviced and repaired by an author- ised workshop.

09 Maintenance and service

Lamps 09

339

General

All bulbs are specified, see page 344. The fol- lowing list contains locations of bulbs and other light sources that are specialised or unsuitable for changing except at a workshop:

Active Xenon headlamps - ABL (Xenon lamps)

Direction indicators, door mirrors

Approach lighting, door mirrors

Courtesy lighting

Glovebox lighting

General interior lighting in the roof

Reading lamps

Side position, position lamps rear

Brake light, Rear fog lamp, Reversing lamp

LED lights, general

WARNING

On cars with Xenon headlamps, the replacement of Xenon lamps must be car- ried out at a workshop - an authorised Volvo workshop is recommended. Working with Xenon lamps demands extreme caution because the headlamp is equipped with a high voltage unit.

WARNING

The cars electrical system must be in key position 0 when replacing bulbs, see page 78

IMPORTANT

Never touch the glass part of the bulbs with your fingers. Grease and oils from your fin- gers are vaporised by the heat, coating the reflector and then causing damage.

Headlamps front

All of the headlamp bulbs are replaced via the engine compartment. Loosen and remove the whole headlamp.

Removing the headlamp

1. Set the car's electrical system in key posi- tion 0, see page 78:

2. (First illustration)

Pull out the headlamp's locking pins.

Pull the headlamp straight forward.

IMPORTANT

Do not pull the electrical cable, only the con- nector.

3. (Second illustration)

Detach the headlamp connector by pressing down the clip with your thumb.

09 Maintenance and service

Lamps 09

340

At the same time, guide out the con- nector with your other hand.

4. Lift out the headlamp and place it on a soft surface to avoid scratching the lens.

5. Replace the bulb in question.

Securing the headlamp

When securing, check that the long lock pin is engaged - it should be engaged in both eyes.

1. Plug in the connector, a clicking sound should be heard.

2. Reinstall the headlamp and locking pins. Check that they are correctly inserted.

3. Check the lighting.

The headlamp must be mounted and the con- nector correctly installed before the lighting is

switched on or the remote control key is inserted into the ignition switch.

Removing the cover

Before starting to replace a bulb, see page 339.

1. Release the catches by pressing out.

2. Remove the cover by pulling it straight out.

Reinstall the cover in reverse order.

Dipped beam, halogen

1. Detach the headlamp, see page 339.

2. Remove the cover.

3. Unplug the connector from the bulb.

4. Detach the bulb by pressing the holder downwards.

5. Fit the new bulb in the socket and snap it in. It can be secured in one position.

Reinstall the parts in reverse order.

09 Maintenance and service

Lamps 09

* Option/accessory, for more information, see Introduction. 341

Main beam, Halogen

1. Detach the headlamp.

2. Remove the cover, see page 340

3. Detach the bulb by turning anticlockwise and then pulling straight out

4. Unplug the connector from the bulb.

5. Replace the bulb and align it in the socket and turn clockwise in order to secure it. It can be secured in one position.

Reinstall the parts in reverse order.

Extra main beam, ABL headlamps*

1. Detach the headlamp.

2. Remove the cover, see page 340.

3. Unplug the connector from the bulb.

4. Detach the bulb holder by pulling it straight out.

5. Replace the bulb and fit the new one in the socket. It can only be secured in one posi- tion.

Reinstall the parts in reverse order.

Direction indicators

1. Detach the headlamp.

2. Detach the bulb holder by turning anti- clockwise.

3. Pull the bulb holder in order to extract the bulb.

4. Remove the blown bulb by pressing it in and turning anticlockwise.

5. Fit a new bulb, press down and turn clock- wise.

6. Fit the bulb holder and turn clockwise.

Reinstall the parts in reverse order.

09 Maintenance and service

Lamps 09

342

Side marker lamps

Before starting to replace a bulb, see page 339.

1. Detach the headlamp.

2. Turn the bulb holder anticlockwise and remove it.

3. Remove the blown bulb and fit a new one. It can only be installed in one way.

4. Fit the bulb holder in the socket and turn clockwise.

Reinstall the parts in reverse order.

Rear fog lamp

The rear fog lamp is accessed behind the bumper.

1. Detach the bulb holder by turning anti- clockwise.

2. Remove the blown bulb by pressing it in and turning the bulb anticlockwise.

3. Fit a new bulb, press down and turn clock- wise.

4. Fit the bulb holder and turn clockwise.

Location of rear bulbs

Lamp lens, right-hand side

Position (LED)/side marker lamps

Side reflector, rear

Brake light

Reversing lamp

Indicator

Brake light (LED)

09 Maintenance and service

Lamps 09

343

Brake light and reversing lamp

Both the brake light and the reversing lamp bulbs are replaced from inside the cargo area.

1. Open the panel.

2. Detach the bulb holder by turning anti- clockwise.

3. Remove the blown bulb by pressing it in and turning anticlockwise.

4. Fit a new bulb, press down and turn clock- wise.

5. Fit the bulb holder and turn clockwise.

Number plate lighting

1. Remove the screws with a screwdriver.

2. Carefully detach the whole lamp housing and withdraw it.

3. Replace the bulb.

4. Refit the whole lamp housing and screw it into place.

Lighting, cargo area

G 03

19 42

1. Insert a screwdriver and gently prize so that the lamp housing comes loose.

2. Replace the bulb.

3. Check that the bulb illuminates and press back the lamp housing.

09 Maintenance and service

Lamps 09

344

Vanity mirror lighting

Removal of lamp lens

1. Insert a screwdriver under the lamp lens and gently prize up the lock lugs on the edge.

2. Snap off the lamp lens.

3. Use needle-nose pliers to pull the bulb straight out to the side and replace with a new one. Note! - Do not pinch hard with the pliers. Otherwise the lamp lens could then be crushed.

Attaching the lamp lens

1. Refit the lamp lens.

2. Press it into place.

Specification, bulbs

Lighting WA Type

Dipped beam, halogen

55 H7 LL

Main beam, Halogen

65 H9

Extra main beam, ABL

65 H9

Front direction indicators

21 PY21W LL

Side marker lamps front

3 W3WLL

Direction indi- cators side, door mirrors

5 WY5W LL

Courtesy light- ing front

3 T10 Socket W2.1x9.5d

Glovebox light- ing

5 Socket SV8.5 Length 43 mm

Vanity mirror lighting

2 T5 Socket W2x4.6d

Cargo area lighting

10 Socket SV8.5 Length 43 mm

Lighting WA Type

Number plate lighting

5 C5W LL

Brake light 21 P21W LL

Reversing lamp 21 P21W LL

Rear fog lamp 21 P21W LL

A Watt

09 Maintenance and service

Wiper blades and washer fluid 09

345

Wiper blades

Service position

Wiper blades in service position.

In order to change, clean or lift the wiper blades (for scraping off ice from the windscreen, for example) they must be in service position.

IMPORTANT

Before placing the wiper blades in the serv- ice position, make sure that they are not fro- zen down.

1. Insert the remote control key in the ignition switch1 and briefly press the START/

STOP ENGINE button to set the car's elec-

trical system to key position I. (For detailed information on key positions, see page 78.)

2. Briefly press the START/STOP ENGINE

button again to set the cars electrical sys- tem in key position 0.

3. Within 3 seconds, move the right stalk switch up and hold it in position for approx. 1 second. > The wipers then move to standing

straight up.

The wipers return to their starting position when you briefly press the START/STOP

ENGINE button to set the cars electrical sys- tem to key position I (or when the car is started).

IMPORTANT

If the wiper arms in service position have been folded up from the windscreen, they must be folded back down onto the wind- screen before the wipers are allowed to return to their starting position. This is to avoid scraping the paint on the bonnet.

NOTE

Once the wiper arms have been in service position, the wipers must be activated and deactivated before service position can be used again.

Replacing the wiper blades

1 Not necessary in cars with Keyless function.

09 Maintenance and service

Wiper blades and washer fluid 09

346

Fold up the wiper arm when it is in service position. Press the button located on the wiper blade mounting and pull straight out parallel with the wiper arm.

Slide in the new wiper blade until a "click" is heard.

Check that the blade is firmly installed.

4. Fold the wiper arm back towards the wind- screen.

The wipers return from service position to their starting position when you briefly press the START/STOP ENGINE button to set the cars electrical system to key position I (or when the car is started).

G 02

17 63

NOTE

The wiper blades are different lengths. The blade on the driver's side is longer than the blade on the passenger side.

Replacing the wiper blades, rear window

G 03

27 70

1. Fold out the wiper arm.

2. Grip the inner section of the blade (by the arrow).

3. Turn anticlockwise to use the blade's end position against the wiper arm as a lever to detach the blade more easily.

4. Press the new wiper blade into position. Check that it is firmly installed.

5. Lower the wiper arm.

Cleaning

For cleaning wiper blades and windscreen, see page 364 and onwards.

IMPORTANT

Check the wiper blades regularly. Neglected maintenance shortens the serv- ice life of the wiper blades.

09 Maintenance and service

Wiper blades and washer fluid 09

347

Filling washer fluid

The windscreen and headlamp washers share a common reservoir.

IMPORTANT

Use washer fluid with antifreeze during the winter to avoid freezing in the pump, reser- voir and hoses.

For capacities, see page 380.

09 Maintenance and service

Battery 09

348

Operation

The service life and function of the battery is influenced by factors such as the number of starts, discharging, driving style, driving con- ditions, climatic conditions etc.

Never disconnect the battery when the engine is running.

Check that the cables to the battery are correctly connected and properly tight- ened.

WARNING

The battery can generate oxyhydrogen gas, which is highly explosive. A spark can be formed if a jump lead is con- nected incorrectly, and this can be enough for the battery to explode.

The battery contains sulphuric acid, which can cause serious burns.

If sulphuric acid comes into contact with eyes, skin or clothing, flush with large quantities of water. If acid splashes into the eyes - seek medical attention immediately.

NOTE

The life of the battery is shortened if it becomes discharged repeatedly.

The life of the battery is affected by several factors, including driving conditions and cli- mate. Battery starting capacity decreases gradually with time and therefore needs to be recharged if the car is not used for a longer time or when it is only driven short distances. Extreme cold further limits star- ting capacity.

To maintain the battery in good condition, at least 15 minutes of driving/week is recom- mended or that the battery is connected to a battery charger with automatic trickle charging.

A battery that is kept fully charged has a maximum service life.

IMPORTANT

Never use a quick charger to charge the battery.

IMPORTANT

If the following instruction is not observed then the energy saving function for infotain- ment may be temporarily disengaged, and/ or the message in the information display about the main battery's state of charge may be temporarily inapplicable, following the connection of an external battery or bat- tery charger:

The negative battery terminal on the car's main battery must never be used for connecting an external battery or battery charger - only the car chassis

may be used as the grounding point. See the section "Start assistance" - for a description of how the cable clamps must be attached.

09 Maintenance and service

Battery 09

349

Symbols on the battery

Use protective goggles.

Further information in the owner's manual.

Store the battery out of the reach of children.

The battery contains cor- rosive acid.

Avoid sparks and naked flames.

Risk of explosion.

Must be taken for recy- cling.

NOTE

An expended battery must be recycled in an environmentally responsible manner - it contains lead.

Replacing the main battery

Removal

First of all: Take the remote control key from the ignition switch and wait at least 5 minutes before any electrical connections are touched - this is because the car's electrical system needs to store the necessary information to control modules.

09 Maintenance and service

Battery 09

350

Open the clips on the front cover and remove the cover.

Release the rubber moulding so that the rear cover is free.

Remove the rear cover by screwing one quarter turn and lifting it away.

WARNING

Connect and remove the positive and neg- ative cables in the correct order.

Detach the black negative cable.

Detach the red positive cable.

Detach the ventilation hose from the bat- tery.

Loosen the screw holding the battery clamp.

Move the battery to the side and lift it up.

Fitting

1. Lower the battery into the battery box.

2. Move the battery inward and to the side until it reaches the rear edge of the box.

3. Tighten the clamp that holds the battery.

4. Connect the ventilation hose. > Check that it is correctly connected to

both battery and outlet in the body.

5. Connect the red positive cable.

6. Connect the black negative cable.

7. Press in the rear cover. (See Removal.)

8. Fit the rubber moulding. (See Removal.)

9. Align the front cover and secure it with the clips. (See removal.)

For more information on the car's main battery - see page 386.

09 Maintenance and service

Battery 09

* Option/accessory, for more information, see Introduction. 351

Eco Start/Stop DRIVe*

Cars with the Start/Stop function are equipped with two 12 V batteries - one extra powerful battery for starting and one support battery that helps during the Eco Start/Stop DRIVe function's starting sequence.

For more information on Start/Stop - see page 126.

For more information on the car's main battery - see page 119 and 386.

Battery Start Support

Cold start capacityA, CCA (A)

760 120

SizeB, LWH (mm)

278175 190 15090106

Capacity (Ah) 70 8

A In accordance with the SAE standard. B Largest possible size.

IMPORTANT

When replacing batteries in cars with the Start/Stop function, the AGM1 type batter- ies must be fitted.

NOTE

The higher the current take-off in the car (extra cooling/heating, etc.) the more the batteries must be charged = increased fuel consumption.

When the capacity of the battery has fallen below the lowest permissible level then the Start/Stop function is disen- gaged.

Temporarily reduced Start/Stop function due to high current take-off means:

The engine starts automatically2 without the driver depressing the clutch pedal (manual gearbox).

The engine starts automatically without the driver lifting his/her foot off the foot brake pedal (automatic gearbox).

Location of the batteries

A: Left-hand drive car. B: Right-hand drive car. 1. Battery for starting3 2. Support battery.

The support battery normally requires no more service than the normal battery that is used for starting. A workshop should be contacted in the event of questions or problems - an author- ised Volvo workshop is recommended.

1 Absorbed Glass Mat 2 Automatic starting can only take place if the gear lever is in neutral position. 3 The battery for starting is described in detail on page 349.

09 Maintenance and service

Battery 09

352

IMPORTANT

If the following instruction is not observed then the Start/Stop function may temporar- ily cease to work after the connection of an external battery or battery charger:

The negative battery terminal on the car's main battery must never be used for connecting an external battery or battery charger - only the car chassis

may be used as the grounding point. See the section "Start assistance" - for a description of how the cable clamps must be attached.

NOTE

If the battery has become so discharged that everything is "black" and in principle the car does not have all the normal electri- cal functions and the engine is subsequently started using an external battery or battery charger, then the Start/Stop function will be activated. It will then be possible for the engine to be auto-stopped but in the event of an auto-stop the Start/Stop function may fail to auto-start the engine due to inade- quate capacity in the battery.

The battery must first be charged in order to ensure a successful auto-start after an auto- stop. At an outside temperature of +15 C the battery needs to be charged for at least 1 hour. At a lower outside temperature a charging time of 3-4 hours is recom- mended. The recommendation is that the battery is charged using an external battery charger.

If this is not possible then the recommen- dation is to temporarily deactivate the Start/Stop function until the battery has been adequately recharged.

For more information about recharging the battery, see the section "Battery" in the chapter "Maintenance and service".

09 Maintenance and service

Fuses 09

353

General

All electrical functions and components are protected by a number of fuses in order to pro- tect the car's electrical system from damage by short circuiting or overloading.

If an electrical component or function does not work, it may be because the component's fuse was temporarily overloaded and failed. If the same fuse fails repeatedly then there is a fault in the circuit. Volvo recommends that you visit an authorised Volvo workshop for checking.

Changing

1. Look in the fuse diagram to locate the fuse.

2. Pull out the fuse and check from the side to see whether the curved wire has blown.

3. If this is the case, replace it with a new fuse of the same colour and amperage.

WARNING

Never use a foreign object, or a fuse with an amperage higher than that specified when replacing a fuse. This could cause signifi- cant damage to the electrical system and possibly lead to fire.

Location, fuse boxes

Central electrical unit locations in a left-hand drive car. In a right-hand drive car the central electrical units under the glovebox change sides.

Engine compartment

Under the glovebox

Under the glovebox

Cargo area

Engine compartment cold zone (only Start/ Stop*)

09 Maintenance and service

Fuses 09

354

Engine compartment

09 Maintenance and service

Fuses 09

* Option/accessory, for more information, see Introduction. 355

General fuses, engine compartment

On the inside of the cover there are tweezers that facilitate the procedure for the removal and fitting of fuses.

Positions (see preceding illustration)

Engine compartment, upper

Engine compartment, front

Engine compartment, lower

These fuses are all located in the engine com- partment box. The fuses in (C) are located under (A).

On the inside of the cover is a label that shows the location of the fuses.

Fuses 1-7 and 42-44 are of the "Midi Fuse" type and must only be replaced by a work- shop1.

Fuses 8-15 and 34 are of the "JCASE" type and should be replaced by a workshop1.

Fuses 16-33 and 35-41 are of the "Mini Fuse" type.

Function A

Primary fuse for the central elec- tronic module (CEM) with fuse box B under the gloveboxA

50

Primary fuse for the central elec- tronic module (CEM) with fuse box B under the glovebox

50

Primary fuse for central electri- cal unit in cargo areaA

60

Primary fuse for central electri- cal unit in passenger compart- ment with fuse box A under the gloveboxA

60

Primary fuse for central electri- cal unit in passenger compart- ment with fuse box A under the gloveboxA

60

- -

PTC element, air preheater*A 100

Headlamp washers* 20

Windscreen wipers 30

Function A

Parking heater* 25

Ventilation fanA 40

- -

ABS pump 40

ABS valves 20

- -

Headlamp levelling*; Active Xenon headlamps - ABL*

10

Primary fuse for the central elec- tronic module (CEM) with fuse box B under the glovebox

20

ABS 5

Speed related power steering* 5

Engine control module; Trans- mission control module; Air- bags

10

Heated washer nozzles* 10

1 An authorised Volvo workshop is recommended.

09 Maintenance and service

Fuses 09

356 * Option/accessory, for more information, see Introduction.

Function A

- -

Headlamp control 5

- -

- -

- -

Internal relay coils 5

Auxiliary lamps* 20

Horn 15

Relay coil in main relay for engine management system; Engine control module (5, 6-cyl. petrol)

10

Transmission control module 15

Solenoid clutch A/C (not 5-cyl. diesel); Coolant pump (5-cyl. diesel Start/Stop)

15

Function A

Relay coil in relay for solenoid clutch A/C (not 5-cyl. diesel); Relay coil in relay for coolant pump (5-cyl. diesel Start/Stop); Relay coils in central electrical unit in engine compartment cold zone (Start/Stop)

5

Start relayA 30

Ignition coils (4-cyl. petrol); Glow control module (5-cyl. die- sel)

10

Ignition coils (5, 6-cyl. petrol); Capacitor (6-cyl.)

20

Engine control module (petrol) 10

Engine control module (diesel) 15

Mass air flow sensor (5-cyl. die- sel, 6-cyl.); Control valves (5- cyl. diesel); Injectors (5, 6-cyl. petrol); Engine control module (5-cyl. petrol, 6-cyl.)

15

Function A

Solenoid clutch A/C (5, 6-cyl.); Valves, Engine control module (6-cyl.) Solenoids (6-cyl. without turbo); Actuator motors, intake manifold (6-cyl. without turbo); Mass air flow sensor (4-cyl. 2.0 l petrol, 5-cyl. petrol); Oil level sensor (5-cyl. diesel)

10

Lambda-sonds (4-cyl. petrol); Lambda-sond (diesel); Control module, radiator roller cover (manual 5-cyl. 2.0 l diesel)

10

EVAP valve (5, 6-cyl. petrol); Lambda-sonds (5, 6-cyl. petrol)

15

Diesel filter heater 20

Control module, radiator roller cover (5-cyl. petrol)

5

Crankcase ventilation heater (5- cyl. diesel); Oil pump automatic gearbox (5-cyl. diesel Start/ Stop)

10

Glow plugs (diesel) 70

09 Maintenance and service

Fuses 09

357

Function A

Cooling fan (4-cyl., 5-cyl. petrol) 60

Cooling fan (6-cyl., 5-cyl. diesel) 80

Electro-hydraulic power steer- ing

100

A For cars with the Start/Stop function this fuse location is empty - see instead page 362.

09 Maintenance and service

Fuses 09

358 * Option/accessory, for more information, see Introduction.

Under the glovebox

Positions

On the inside of the cover is a label that shows the location of the fuses in fuse box A.

Box A Function A

Primary fuse for audio con- trol module*; Primary fuse for fuses 16-20: Infotain- ment

40

- -

- -

Box A Function A

- -

- -

- -

12 V socket, cargo area* 15

Control panel, driver's door 20

Control panel, front passen- ger door

20

Box A Function A

Control panel, rear passen- ger door, right

20

Control panel, rear passen- ger door, left

20

Keyless* 20

Power seat driver's side* 20

Power seat passenger side* 20

09 Maintenance and service

Fuses 09

* Option/accessory, for more information, see Introduction. 359

Box A Function A

- -

Infotainment control module 5

Audio control unit (ampli- fier)*

Digital radio*; TV*

10

Audio 15

Telematics*; Bluetooth* 5

Rear Seat Entertainment (RSE)*

7.5

Sunroof*; Interior lighting roof; Climate sensor*; Damper motors, air intake

5

12 V socket, tunnel console 15

Seat heating, rear right* 15

Seat heating, rear left* 15

Power lumbar support* 15

Seat heating (passenger side)

15

Box A Function A

Seat heating (driver's side) 15

Parking assistance*; Park- ing camera*; Towbar control module *

5

AWD control module* 15

Active chassis Four-C* 10

Box B Function A

Rear window wiper 15

- -

Interior lighting; Driver's door control panel, power windows; Power seats, front*; Remote controlled garage door opener*

7.5

Information display (DIM) 5

Adaptive cruise control, ACC*; collision warning sys- tem*

10

Interior lighting; Rain sensor 7.5

Box B Function A

Steering wheel module 7.5

Central locking system, fuel filler flap

10

Rear window washer 15

Windscreen washers 15

Unlocking, tailgate 10

Folding head restraint* 10

Fuel pump 20

Movement detector alarm*; Climate panel

5

Steering lock 15

Siren alarm*; Data link con- nector OBDII

5

- -

Airbags 10

Collision warning system* 5

09 Maintenance and service

Fuses 09

360 * Option/accessory, for more information, see Introduction.

Box B Function A

Accelerator pedal sensor, PTC element air preheater*; Dimming, interior rearview mirror*; Seat heating, rear*

7.5

- -

Brake light 5

Sunroof* 20

Immobiliser 5

09 Maintenance and service

Fuses 09

* Option/accessory, for more information, see Introduction. 361

Cargo area

The fuse box is located behind the upholstery on the left-hand side.

Positions

Function A

Electric parking brake, left 30

Electric parking brake, right 30

Rear window defroster 30

Trailer socket 2* 15

Function A

Power operated tailgate* 20

- -

- -

- -

Function A

- -

- -

Trailer socket 1* 40

- -

09 Maintenance and service

Fuses 09

362 * Option/accessory, for more information, see Introduction.

Engine compartment, cold zone - Start/Stop*

Location of fuses for the Start/Stop function.

Fuses A1 and A2 are of the "MEGA Fuse" type and must only be replaced by a work- shop2.

Fuses 1-11 are of the "Midi Fuse" type and must only be replaced by a workshop2.

Fuse 12 is of the "Mini Fuse" type.

For more information on Start/Stop - see page 126.

Positions

Function A

Main fuse for central electrical unit in the engine compartment

175

Function A

Main fuse for central electronic module (CEM) with fuse box B under the glovebox, central electrical unit in passenger compartment with fuse box A under the glovebox, central electrical unit in cargo area

175

PTC element, air preheater* 100

2 An authorised Volvo workshop is recommended.

09 Maintenance and service

Fuses 09

363

Function A

Primary fuse for the central elec- tronic module (CEM) with fuse box B under the glovebox

50

Primary fuse for central electri- cal unit in passenger compart- ment with fuse box A under the glovebox

60

Primary fuse for central electri- cal unit in passenger compart- ment with fuse box A under the glovebox

60

Primary fuse for central electri- cal unit in cargo area

60

Ventilation fan 40

- -

- -

Start relay 30

Internal diode 50

Function A

Support battery 70

Central electronic module (CEM) - reference voltage sup- port battery; Charging point support battery

15

09 Maintenance and service

Car care 09

364

Washing the car

Wash the car as soon as it becomes dirty. Wash the car in a car wash with oil separator. Use car shampoo.

Remove bird droppings from the paintwork as soon as possible. Bird droppings con- tain chemicals that affect and discolour paintwork very quickly. An authorised Volvo workshop is recommended for the removal of any discoloration.

Hose down the underbody.

Rinse the whole car until the loose dirt has been removed in order to reduce the risk of scratches from washing. Do not spray directly onto the locks.

If necessary, use cold degreasing agent on very dirty surfaces. Note that the surfaces must not then be warmed up by the sun!

Wash using a sponge, car shampoo and plenty of lukewarm water.

Clean the wiper blades with a lukewarm soap solution or car shampoo.

Use cold degreasing agent on very dirty surfaces.

Dry the car using a clean, soft chamois or a water scraper. If you avoid allowing water droplets to dry in strong sunlight then the risk of water stains that may need to be polished away is reduced.

WARNING

Always have the engine cleaned by a work- shop. There is a risk of fire if the engine is hot.

IMPORTANT

Dirty headlamps have impaired functional- ity. Clean them regularly, when refuelling for example.

Do not use any corrosive cleaning agents but use water and a non-scratching sponge instead.

NOTE

Outside lighting such as headlamps, fog lamps and rear lamps may temporarily have condensation on the inside of the lens. This is normal, all exterior lighting is designed to withstand this. Condensation is normally vented out of the lamp housing when the lamp has been switched on for a time.

Cleaning the wiper blades

Asphalt, dust and salt residue on wiper blades, as well as insects, ice etc. on the windscreen, impair the service life of wiper blades.

For cleaning:

Set the wiper blades in service position, see page 345.

NOTE

Wash the wiper blades and windscreen reg- ularly with lukewarm soap solution or car shampoo.

Do not use any strong solvents.

Automatic car washes

An automatic car wash is a simple and quick way of washing the car, but it cannot reach everywhere. Handwashing the car is recom- mended for achieving optimum results.

NOTE

During the first few months a new car must only be handwashed. This is because the paintwork is more sensitive when it is new.

High-pressure washing

When using high-pressure washing, use sweeping movements and make sure that the nozzle does not come closer than 30 cm to the surface of the car (the distance applies to all exterior parts). Do not spray directly onto the locks.

09 Maintenance and service

Car care 09

* Option/accessory, for more information, see Introduction. 365

Testing the brakes

WARNING

Always test the brakes after washing the car, including the parking brake, to ensure that moisture and corrosion do not attack the brake linings and reduce braking per- formance.

Lightly depress the brake pedal now and then when driving long distances in rain or slush. The heat from the friction causes the brake lin- ings to warm up and dry. Do the same thing after starting in very damp or cold weather.

Exterior plastic, rubber and trim

components

A special cleaning agent available from Volvo dealers is recommended for the cleaning and care of coloured plastic parts, rubber and trim components, such as glossy trim mouldings. When using such a cleaning agent the instruc- tions must be followed carefully.

IMPORTANT

Avoid waxing and polishing on plastic and rubber.

When using degreasant on plastic and rub- ber, only rub with light pressure if it is nec- essary. Use a soft washing sponge.

Polishing glossy trim mouldings could wear away or damage the glossy surface layer.

Polishing agent that contains abrasive must not be used.

Rims

Only use rim cleaning agent recommended by Volvo.

Strong rim cleaning agents can damage the surface and cause stains on chrome-plated aluminium rims.

Polishing and waxing

Polish and wax the car if the paintwork is dull or to give the paintwork extra protection.

The car does not need to be polished until it is at least one year old. However, the car can be waxed during this time. Do not polish or wax the car in direct sunlight.

Wash and dry the car thoroughly before you begin polishing or waxing. Clean off asphalt and tar stains using tar remover or white spirit.

More stubborn stains can be removed using fine rubbing paste designed for car paintwork.

Polish first with a polish and then wax with liq- uid or solid wax. Follow the instructions on the packaging carefully. Many preparations con- tain both polish and wax.

IMPORTANT

Only paint treatment recommended by Volvo should be used. Other treatment such as preserving, sealing, protection, lustre sealing or similar could damage the paint- work. Paintwork damage caused by such treatments is not covered by Volvo war- ranty.

Water-repellent coating*

Never use products such as car wax, degreaser or similar on glass surfa-

ces as this could ruin their water-repellent properties.

Take care when cleaning so as not to damage the glass surface.

To avoid damaging glass surfaces when removing ice only use plastic ice scrapers.

There is natural wear of the water-repellent coating.

Treatment with a special finishing agent avail- able from Volvo dealers is recommended in

09 Maintenance and service

Car care 09

366

order to maintain the water-repellent proper- ties. This should be used first after three years and then each year.

Rustproofing inspection and maintenance

The car received a thorough and complete rustproofing at the factory. Parts of the body are made of galvanised sheet metal. The underbody is protected by a wear-resistant anti-corrosion compound. A thin, penetrating rustproofing fluid was sprayed into the exposed members, cavities, closed sections and side doors.

Under normal conditions the rustproofing does not require treatment for approximately 12 years. After this period, it should be treated at three-year intervals. Volvo recommends that you engage an authorised Volvo workshop for assistance if the car needs further treatment.

Dirt and road salt can lead to corrosion so it is important to keep the car clean. The car's rust- proofing needs to be checked regularly and touched-up if necessary in order for it to be maintained.

Cleaning the interior

Only use cleaning agents and car care prod- ucts recommended by Volvo. Clean regularly and follow the instructions included with the car care product.

Vacuuming is important prior to using cleaning agents.

Carpets and cargo area

Remove inlaid carpets for separate cleaning of the floor carpet and the inlaid carpets. Use a vacuum cleaner to remove dust and dirt.

Each inlay mat is secured with pins.

Take hold of the inlay mat at each pin and lift the mat straight up.

Fit the inlay mat in place by pressing it in at each pin.

WARNING

Before setting off check that the inlaid mat in the driver area is firmly affixed and secured in the pins in order to avoid getting caught adjacent to and under the pedals.

A special textile cleaner is recommended for stains on the floor mat after vacuuming. Floor mats should be cleaned with agents recom- mended by your Volvo dealer!

Stains on fabric upholstery and roof

upholstery

A special fabric cleaning agent, available from authorised Volvo dealers, is recommended to avoid impairing the fire retardant qualities of the upholstery.

IMPORTANT

Sharp objects and Velcro may damage the fabric upholstery.

Treating stains on leather upholstery

Volvo's leather upholstery is chromium-free and is treated to preserve its original appear- ance.

Leather upholstery ages and acquires a beau- tiful patina over time. The leather is refined and processed so that it retains its natural charac- teristics. It is given a protective coating, but regular cleaning is required in order to maintain both characteristics and appearance. Volvo offers a comprehensive product for the clean- ing and treatment of leather upholstery which, when used in accordance with the instructions, preserves the leather's protective coating. After a period of use the natural appearance of the leather will nevertheless emerge, depend- ing more or less on the surface texture of the leather. This is a natural maturing of the leather and shows that it is a natural product.

09 Maintenance and service

Car care 09

367

To achieve best results Volvo recommends cleaning and the application of protective cream once to four times per year (or more if necessary). The Volvo Leather Care kit is avail- able from your Volvo dealer.

IMPORTANT

Certain items of coloured clothing (for example, jeans and suede garments) may stain the upholstery.

Never use strong solvents. Such prod- ucts may damage fabric, vinyl and leather upholstery.

Washing instructions for leather

upholstery

1. Pour the leather cleaner on the dampened sponge and squeeze out a strong foam.

2. Work the dirt away with gentle circular movements.

3. Dab accurately with the sponge on the stains. Allow the sponge to absorb the stain. Do not rub.

4. Wipe off with soft paper or a cloth and allow the leather to dry completely.

Protective treatment of leather

upholstery

1. Pour a small amount of the protective cream on the felted cloth and massage in a thin layer of cream with gentle circular movements on the leather.

2. Allow the leather to dry for 20 minutes before use.

The leather has now been given improved pro- tection against stains and improved UV pro- tection.

Washing instructions for the leather

steering wheel

Remove dirt and dust with a soft pre-mois- tened sponge and neutral soap.

Leather needs to breathe. Never cover the leather steering wheel with protective plas- tic.

Use natural oils. Volvo's leather care agents are recommended for best results.

If the steering wheel has stains:

Group 1 (ink, wine, coffee, milk, sweat and blood)

Use a soft cloth or sponge. Mix a 5% ammonia solution. (For blood stains, use a solution of 2 dl water and 25g salt.)

Group 2 (fats, oils, sauces and chocolate)

1. Same procedure as group 1.

2. Polish with an absorbent paper or cloth.

Group 3 (dry dirt, dust)

1. Use a soft brush to remove the dirt.

2. Same procedure as group 1.

Treating stains on interior plastic, metal

and wood parts

A fibrillated fibre or microfibre cloth, lightly moistened with water, available from Volvo dealers, is recommended for cleaning interior parts and surfaces.

Do not scrape or rub stains. Never use strong stain removers. A special cleaning agent avail- able from Volvo dealers can be used for more difficult cleaning.

Cleaning seatbelts

Use water and a synthetic detergent. A special textile cleaning agent is available from your Volvo dealer. Make sure the seatbelt is dry before allowing it to retract.

09 Maintenance and service

Car care 09

368

Touching up minor paintwork damage

Paint is an important part of the car's rust- proofing and should therefore be checked reg- ularly. To avoid the onset of rust, damaged paintwork should be rectified immediately. The most common types of paintwork damage are stone chips, scratches, and marks on the edges of wings, doors and bumpers.

Materials

primer1 - for e.g. plastic-clad bumpers there are special adhesive primers availa- ble in spray cans

base coat and clear coat - are available in spray cans or as touch-up pens/sticks2

masking tape

fine sand paper1.

Colour code (Paint code)

Code for car's colour

It is important that the correct colour is used. For product decal location, see page 372.

Repairing minor paint damage such as

stone chips and scratches

G 02

18 32

Before work is started, the car must be clean and dry as well as at a temperature above 15 C.

1. Apply a piece of masking tape over the damaged surface. Then remove the tape to remove any loose paint.

If the damage has reached down to a metal surface (sheet steel), it is preferable to use a primer. In the event of damage to a plas- tic surface, an adhesive primer should be used for better results - spray into the spray can's cap and brush thinly.

1 If required. 2 Follow the instructions that are included with the package for the touch-up pen/stick.

09 Maintenance and service

Car care 09

369

2. A light sanding with very fine abrasive material can be performed locally before painting if necessary (e.g. if there are rough edges). Clean the surface thoroughly and allow to dry.

3. Stir the primer well and apply using a fine brush, matchstick or similar. Finish with base coat and clear coat once the primer has dried.

4. For scratches, proceed as above, but mask around the damaged area to protect the undamaged paintwork.

NOTE

If the stone chip has not penetrated down to the meal and an undamaged layer of paint remains in place, fill in with base coat and clear coat as soon as the surface has been cleaned.

370

Type designations................................................................................. 372 Dimensions and weights....................................................................... 374 Engine specifications............................................................................ 377 Engine oil............................................................................................... 378 Fluids and lubricants............................................................................. 380 Fuel....................................................................................................... 382 Wheel and tyres, dimensions and pressure ......................................... 385 Electrical system................................................................................... 386 Type approval....................................................................................... 387 Symbols in the display.......................................................................... 399

SPECIF ICATIONS

10 Specifications

Type designations

10

372

Label location

10 Specifications

Type designations

10

373

Knowing the car's type designation, vehicle identification and engine numbers can facili- tate all contact with an authorised Volvo dealer regarding the car and when ordering spare parts and accessories.

Type designation, vehicle identification number, maximum permissible weights, codes for colour and upholstery and type approval number. The label is visible when the right rear door is opened.

Label for parking heater.

Engine code and engine serial number.

6-cyl.

4-cyl / 5-cyl

Label for engine oil.

Gearbox type designation and serial num- ber.

Manual gearbox

Automatic gearbox

Car's identification number. (VIN Vehicle Identification Number)

Further information on the car is presented in the registration document.

NOTE

The labels shown in the owner's manual are not provided as exact reproductions of those in the car. The purpose is to show their approximate appearance and location in the car. The information that applies to your car in particular is available on the label in question in your car.

10 Specifications

Dimensions and weights

10

374

Dimensions

Dimensions mm

A Wheelbase 2774

B Length 4627

C Load length, floor, folded rear seat 1789

D Load length, floor 972

E Height 1713

F Load height 802

G Front track 1632

Dimensions mm

H Rear track 1586

I Load width, floor 1090

J Width 1891

K Width including door mirrors 2120

L Width including folded-in door mirrors 1891

Weights

Kerb weight includes the driver, the fuel tank 90% full and all fluids.

The weight of passengers and accessories, and towball load (when a trailer is hitched, see table page 375) influences the payload and is not included in the kerb weight.

Permitted max. load = Gross vehicle weight - Kerb weight.

10 Specifications

Dimensions and weights

10

375

NOTE

The documented kerb weight applies to cars in the standard version - i.e. a car with- out extra equipment or accessories. This means that for every accessory added the loading capacity of the car is reduced cor- respondingly by the weight of the acces- sory.

Examples of accessories that reduce load- ing capacity are the Kinetic/Momentum/ Summum equipment levels, as well as other accessories such as Towbar, Load carriers, Space box, Audio system, Auxiliary lamps, GPS, Fuel-driven heater, Safety grille, Car- pets, Cargo cover, Power seats, etc.

Weighing the car is a certain way of ascer- taining the kerb weight of your own partic- ular car.

WARNING

The car's driving characteristics change depending on how heavily it is loaded and how the load is distributed.

For information on decal location, see page 372.

Max. gross vehicle weight

Max. train weight (car+trailer)

Max. front axle load

Max. rear axle load

Equipment level

Max. load: See registration document.

Max. roof load: 100 kg.

Towing capacity and towball load

NOTE

The use of a stabiliser hitch on the towing bracket is recommended for trailers heavier than 1800 kg.

Engine Engine codeA Gearbox Max. weight braked trailer (kg) Max. towball load (kg)

All All All 01200 50

T5 B4204T7 Automatic, MPS6 1800 90

10 Specifications

Dimensions and weights

10

376

Engine Engine codeA Gearbox Max. weight braked trailer (kg) Max. towball load (kg)

3.2 AWD B6324S5 Automatic, TF-80SC 1800 90

T6 AWD B6304T4 Automatic, TF-80SC 2000 90

D3 D5204T7 Manual, M66 1600 75

D3 D5204T7 Automatic, TF-80SC 1600 75

D4 D5204T3 Manual, M66 1600 75

D4 D5204T3 Automatic, TF-80SC 1600 75

D4 AWD D5244T17 Manual, M66 1800 90

D4 AWD D5244T17 Automatic, TF-80SC 2000 90

D4 AWDB D5204T3 Automatic, TF-80SC 1600 75

D5 AWD D5244T11 Manual, M66 1800 90

D5 AWD D5244T15 Automatic, TF-80SC 2000 90

A Engine code, component and serial number can be read on the engine, see page 372. B Only certain markets.

Max. weight unbraked trailer (kg) Max. towball load (kg)

750 50

10 Specifications

Engine specifications

10

377

Engine specifications

NOTE

Not all engines are available in all markets.

Engine Engine

codeA

Output (kW/rpm)

Output (hp/rpm)

Torque (Nm/ rpm)

No. of cylin- ders

Bore (mm)

Stroke (mm)

Swept volume (litres)

Com- pression

ratio

T5 B4204T7 177/5500 240/5500 320/1800-5000 4 87.5 83.1 1.999 10.0:1

T6 AWD B6304T4 224/5600 304/5600 440/21004200 6 82.0 93.2 2.953 9.3:1

3.2 AWD B6324S5 179/6400 243/6400 320/3200 6 84 96 3.192 10.8:1

D3 D5204T7 100/3500 136/3500 350/1500-2250 5 81.0 77 1.984 16.5:1

D4

D4 AWDB D5204T3 120/3500 163/3500 400/1500-2750 5 81.0 77 1.984 16.5:1

D4 AWD D5244T17 120/4000 163/4000 420/15002500 5 81.0 93.15 2.400 16.5:1

D5 AWD D5244T11C 158/4000 215/4000 420/15003250 5 81.0 93.15 2.400 16.5:1

D5 AWD D5244T15D 158/4000 215/4000 440/1500-3000 5 81.0 93.15 2.400 16.5:1

A Engine code, component and serial number can be read on the engine, see page 372. B Only certain markets. C Manual gearbox D Automatic gearbox

10 Specifications

Engine oil

10

378

Adverse driving conditions

Adverse driving conditions can lead to abnor- mally high oil temperature or oil consumption. Below are some examples of adverse driving conditions.

Check the oil level more frequently for long journeys:

towing a caravan or trailer

in mountainous regions

at high speeds

in temperatures colder than -30 C or hot- ter than +40 C

The above also apply to shorter driving dis- tances at low temperatures.

Choose a fully synthetic engine oil for adverse driving conditions. It provides extra protection for the engine.

Volvo recommends Castrol oil products.

IMPORTANT

In order to fulfil the requirements for the engine's service intervals all engines are filled with a specially adapted synthetic engine oil at the factory. The choice of oil has been made very carefully with regard to service life, starting characteristics, fuel consumption and environmental impact.

An approved engine oil must be used in order that the recommended service inter- vals can be applied. Only use a prescribed grade of oil for both filling and oil change, otherwise you will risk affecting service life, starting characteristics, fuel consumption and environmental impact.

Volvo Car Corporation disclaims all war- ranty liability if engine oil of the prescribed grade and viscosity is not used.

Volvo recommends that oil changes are car- ried out at an authorised Volvo workshop.

10 Specifications

Engine oil

10

379

Engine oil grade

Engine Engine codeA Recommended oil grade Volume, incl. oil filter

(litres)

T6 AWD B6304T4 Oil grade: ACEA A5/B5

Viscosity: SAE 0W30

approx 6.8

3.2 AWD B6324S5 approx 6.8

D4

D4 AWDB D5204T3 approx. 5.9

D3 D5204T7 approx. 5.9

D4 AWD D5244T17 approx. 5.9

D5 AWD D5244T11C approx. 5.9

D5 AWD D5244T15D approx. 5.9

T5 B4204T7

Oil grade: ACEA A5/B5

Viscosity: SAE 5W30

When driving under adverse conditions, use ACEA A5/B5 SAE 0W-30.

approx. 5.4

A Engine code, component and serial number can be read on the engine, see page 372. B Only certain markets. C Manual gearbox. D Automatic gearbox.

For filling engine oil, see page 333.

10 Specifications

Fluids and lubricants

10

380

Coolant

Prescribed grade: Coolant recommended by Volvo mixed with 50% water1, see the pack- aging.

EngineA Volume

(litres)

3.2 AWD B6324S5 8.9

T6 AWD B6304T4

D4 D5204T3

D3 D5204T7

D4 AWD D5244T17

D5 AWD D5244T15

D5 AWD D5244T11

T5 B4204T7 10.5

A Engine code, component and serial number can be read on the engine, see page 372.

Other fluids and lubricants

Manual gearbox Volume (litres) Prescribed transmission fluid

M66 1.9 BOT 350M3

1 Water quality must fulfil the standard STD 1285.1.

10 Specifications

Fluids and lubricants

10

381

Automatic gearbox Volume (litres) Prescribed transmission fluid

MPS6 7.3 BOT 341

TF-80SC 7.0 AW1

Fluid System Volume (litres) Prescribed grade

Brake fluid Brake system 0.6 DOT 4+

Power steering fluid Power steering - WSS M2C204-A2 or equivalent product.

Washer fluid Cars with headlamp washing 6.5 Washer fluid recommended by Volvo - with frost protection during cold weather and below freezing point.

Cars without headlamp washing 4.5

Fuel Petrol engine approx. 70 Petrol: see page 296

Diesel engine approx. 70 Diesel: see page 297

NOTE

Under normal driving conditions, the gear- box oil does not need to be changed during its service life. However, this may be nec- essary under adverse driving conditions, see page 380.

10 Specifications

Fuel

10

382

CO2 emissions and fuel consumption

T5 262 11.3 161 6.9 198 8.5

T6 AWD 354 15.2 188 8.1 249 10.7

3.2 AWD 322 13.8 176 7.6 229 9.9

D3 182 6.9 129 4.9 149 5.7

D3 229 8.7 148 5.6 178 6.8

D4 182 6.9 129 4.9 149 5.7

D4 229 8.7 148 5.6 178 6.8

D4 AWD 172 6.5 135 5.1 149 5.7

D4 AWD 233 8.9 148 5.6 179 6.8

10 Specifications

Fuel

10

383

D5 AWD 172 6.5 135 5.1 149 5.7

D5 AWD 233 8.9 148 5.6 179 6.8

Explanation

gram/km

litre/100 km

Urban driving

Extra-urban driving

Combined driving

NOTE

If the consumption and emission data is missing then it is included in the enclosed supplement.

Fuel consumption and emissions of

carbon dioxide

Fuel consumption and emission values in the table above are based on specific EU cycles1, that apply to cars with kerb weight in the basic version and without extra equipment. The car's weight may increase depending on equipment. This, as well as how heavily the car is loaded, increases fuel consumption and carbon diox- ide emissions.

There are several reasons for increased fuel consumption compared with the table's val- ues. Examples of this are:

The driver's driving style.

If the customer has specified wheels larger than those fitted as standard on the mod- el's basic version, then resistance increa- ses.

High speed results in increased wind resis- tance.

Fuel quality, road and traffic conditions, weather and the condition of the car.

Even a combination of the above-mentioned examples can result in significantly improved

1 Official fuel consumption figures are based on two standardised driving cycles in a laboratory environment ("EU driving cycles") all in accordance with EU Directive 80/1268/EEC (Euro 4), EU Regulation no 692/2008 (Euro 5) and UN ECE Regulation no 101. The regulations cover the driving cycles for urban driving and extra-urban driving. - Urban driving - the measurement starts with cold starting the engine. The driving is simulated. - Extra-urban driving - the car is accelerated and braked at speeds between 0 and 120 km/h. The driving is simulated. - A car with D4 AWD or D5 AWD engine and 6-speed manual gearbox is started in 2nd gear. The combined driving value given in the table is a combination of urban driving and extra-urban driving, in accordance with applicable legislation. CO2 emissions - the exhaust gases are collected in order to calculate the carbon dioxide emissions during the two driving cycles. These are then analysed and give the value for CO2 emissions.

10 Specifications

Fuel

10

384

consumption. For further information, please refer to the regulations referred to1.

Large deviations in fuel consumption may arise in a comparison with the EU driving cycles1

which are used in the certification of the car and on which the consumption figures in the table are based.

To bear in mind

Tips that the driver can use in order to reduce consumption:

Drive gently and avoid unnecessary accel- eration as well as braking too hard.

Drive with the correct air pressure in the tyres and check this regularly - select ECO tyre pressure for best results, see the tyre pressure table on page 385.

Choice of tyres can affect fuel consump- tion - seek advice on suitable tyres from a dealer.

See further information and more advice on pages 12 and 292.

See page 296 for general information on fuel.

1 Official fuel consumption figures are based on two standardised driving cycles in a laboratory environment ("EU driving cycles") all in accordance with EU Directive 80/1268/EEC (Euro 4), EU Regulation no 692/2008 (Euro 5) and UN ECE Regulation no 101. The regulations cover the driving cycles for urban driving and extra-urban driving. - Urban driving - the measurement starts with cold starting the engine. The driving is simulated. - Extra-urban driving - the car is accelerated and braked at speeds between 0 and 120 km/h. The driving is simulated. - A car with D4 AWD or D5 AWD engine and 6-speed manual gearbox is started in 2nd gear. The combined driving value given in the table is a combination of urban driving and extra-urban driving, in accordance with applicable legislation. CO2 emissions - the exhaust gases are collected in order to calculate the carbon dioxide emissions during the two driving cycles. These are then analysed and give the value for CO2 emissions.

10 Specifications

Wheel and tyres, dimensions and pressure

10

385

Approved tyre pressures

Engine Tyre size Speed

(km/h)

Load, 1 - 3 persons Max. load ECO pressureA

Front

(kPa)B

Rear

(kPa)

Front

(kPa)

Rear

(kPa)

Front/rear

(kPa)

All engines

235/65 R 17

235/60 R 18

235/55 R 19

255/45 R 20

0 - 160 240 240 270 270 270

160 + 240 240 270 270 -

Temporary Spare Tyre max. 80 420 420 420 420 -

A Economical driving. B In certain countries there is the "bar" unit beside the SI unit "Pascal": 1 bar = 100 kPa.

NOTE

All engines, tyres or combinations of these are not always available in all markets.

10 Specifications

Electrical system

10

386 * Option/accessory, for more information, see Introduction.

Electrical system

The car has a voltage-regulated AC alternator. The electrical system is single-pole and uses the chassis and engine casing as a conductor.

The battery capacity is dependent upon the equipment level in the vehicle.

IMPORTANT

If the battery is replaced, replace it with a battery of the same cold start capacity and reserve capacity as the original (see the decal on the battery).

Battery

Engine Voltage (V) Cold start capacity,

CCA - Cold Cranking Amperes (A)

Reserve capacity

(minutes)

Petrol (Ethanol) 12 520800 100160

Diesel 12 700800 135160

Petrol/Diesel with Start/Stop function 12 760A 135

A Battery type AGM (Absorbed Glass Mat) must be used in cars with the Start/Stop function.

NOTE

The battery's container size should be consistent with the original battery's dimensions.

The battery's height is different depend- ing on size.

Eco Start/Stop DRIVe*

For information on batteries in cars with Eco Start/Stop DRIVe, see page 351.

10 Specifications

Type approval

10

387

Remote control key system

Lock system, standard

Country

EU, China

Keyless lock system (Keyless drive)

Country

EU

Korea

Country

China

Hong Kong

Radar system

Country

Singapore

IDA: Infocomm Development Authority of Singapore.

Brazil

10 Specifications

Type approval

10

388

Bluetooth

Declaration of Conformity (Declaration of Conformity)

Country

Countries in the EU:

Exporting country: Japan

Manufacturer: Alpine Electronics Inc.

Type of equipment: Bluetooth device

For further information visit http://ec.europa.eu/enterprise/rtte/faq.htm #informing

10 Specifications

Type approval

10

389

Country

Czech Republic:

Alpine Electronics, Inc. tmto prohlauje, e tento Bluetooth Module je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES.

Denmark: Undertegnede Alpine Electronics, Inc. erklrer herved, at flgende udstyr Bluetooth Module overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF.

Germany: Hiermit erklrt Alpine Electronics, Inc., dass sich das Gert Bluetooth Module in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet.

10 Specifications

Type approval

10

390

Country

Estonia: Kesolevaga kinnitab Alpine Electronics, Inc. seadme Bluetooth Module vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele.

UK Hereby, Alpine Electronics, Inc., declares that this Bluetooth Module is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Spain: Por medio de la presente Alpine Electronics, Inc. declara que el Bluetooth Module cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Greece: Alpine Electronics, Inc. Bluetooth Module 1999/5/.

France: Par la prsente Alpine Electronics, Inc. dclare que l'appareil Bluetooth Module est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Italy: Con la presente Alpine Electronics, Inc. dichiara che questo Bluetooth Module conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latvia: Ar o Alpine Electronics, Inc. deklar, ka Bluetooth Module atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem.

Lithuania: iuo Alpine Electronics, Inc. deklaruoja, kad is Bluetooth Module atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Nether- lands:

Hierbij verklaart Alpine Electronics, Inc. dat het toestel Bluetooth Module in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Malta: Hawnhekk, Alpine Electronics, Inc., jiddikjara li dan Bluetooth Module jikkonforma mal- ti ijiet essenzjali u ma provvedimenti o rajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Hungary: Alulrott, Alpine Electronics, Inc. nyilatkozom, hogy a Bluetooth Module megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak.

10 Specifications

Type approval

10

391

Country

Poland: Niniejszym Alpine Electronics, Inc. owiadcza, e Bluetooth Module jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Portugal: Alpine Electronics, Inc. declara que este Bluetooth Module est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE.

Slovenia: Alpine Electronics, Inc. izjavlja, da je ta Bluetooth Module v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES.

Slovakia: Alpine Electronics, Inc. tmto vyhlasuje, e Bluetooth Module spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.

Finland: Alpine Electronics, Inc. vakuuttaa tten ett Bluetooth Module tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen.

Sweden: Hrmed intygar Alpine Electronics, Inc. att denna Bluetooth Module str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG.

Iceland: Alpine Electronics, Inc. hereby certifies that this Bluetooth Module conforms to the essential characteristic requirements and other relevant regulations of directive 1999/5/EC.

Norway: Alpine Electronics, Inc. erklrer herved at utstyret Bluetooth Module er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF.

10 Specifications

Type approval

10

392

Country

China:

10 Specifications

Type approval

10

393

Country

Taiwan:

CCAB10LP0230T7

10 Specifications

Type approval

10

394

Country

South Korea: Volvo Car Korea

Alpine Electronics, Inc

Made in Japan

Volvo Car Korea

http://www.volvocars.com/kr

10 Specifications

Type approval

10

395

Country

Singa- pore:

The Uni- ted Arab Emirates:

Jordan: The product that contains the Bluetooth module is approved with the following certification number.

BT module certification number: TRC/LPD/2010/4.

BT module name: IAM2.1BT PWB EU

10 Specifications

Type approval

10

396

Country

South Africa:

Uruguay: This product contains URSEC approved transmitter [module name and model name (IAM2.1 BT PWB EU + BVJG905A, BVVE905A, BVLV905A)]

10 Specifications

Type approval

10

397

Country

Jamaica: Approved for use in Jamaica SMA EI: IAM2.1

Thailand: This telecommunication equipment conforms to NTC technical requirement.

Nigeria:

Mexico: Warning

"Este equipo opera a titulo secundario, consecuentemente, debe aceptar interferencias perjudiciales incluyendo equipos de la misma clase y puede no causar interferencias a sistemas operando a titulo primario."

Bluetooth module installation information

This module board is to be installed only by the professional line operator and used only for car audio produced by ALPINE ELEC- TRONICS, INC. When this Bluetooth Module Board is installed in the Car Audio, we shall consider the following points: 1. Since "IAM2.1 BT PWB US" owns its FCC ID/IC Number, we shall affix an exterior label on the outside of the product if the FCC ID is not visible. The exterior label shall use wording such as either "Contains Transmitter Module Board FCC ID: A269ZUA130 / IC: 700B- IAM2101" or "Contains FCC ID: A269ZUA130 / IC: 700B-IAM2101". 2. "IAM2.1 BT PWB US" complies with requirements of subsections 15.19(a)(3) in FCC Rules Part 15 Subpart C. The manual statement 15.19 (a)(3) is included in User Guide of the product.

COFETEL No. RCPALIA10-0353

10 Specifications

Type approval

10

398

Country

Bot- swana:

Croatia:

10 Specifications

Symbols in the display

10

* Option/accessory, for more information, see Introduction. 399

General

There are a variety of different symbols in the display in the car. The symbols are divided into warning, indicator and information symbols. Shown below are the most common symbols with their meanings and a reference to where in the manual further information can be found. For more information on symbols and text messages, see pages 72, 74 and 198.

- Red warning symbol, illuminates when a fault has been indicated which could affect the safety and/or driveability of the car. At the same time an explanatory text is displayed in the information display.

- Yellow information symbol, illuminates in combination with text in the information dis- play, when a deviation in any of the car's sys- tems has occurred. The yellow symbol infor- mation can also illuminate in combination with other symbols.

Symbols in the display

Indicator and warning symbols in the

combined instrument panel

Symbol Meaning Page

Low oil pres- sure

74

Parking brake

74, 137, 139

Airbags - SRS

19, 74

Seatbelt reminder

16, 74

Alternator not charging

74

Fault in the brake system

74, 134

Warning, safety mode

19, 31, 74, 75, 124

Indicator and information symbols in the

combined instrument panel

Symbol Meaning Page

Fault in the ABL system*

72, 90

Emissions sys- tem

72

Fault in the ABS system

72, 134

Rear fog lamp on

72, 91

Stability sys- tem, DSTC, Hill descent con- trol, Trailer sta- bility assist

72, 135, 147, 310

Stability sys- tem, sport mode

72, 147

Engine pre- heater (diesel)

72

Low level in fuel tank

72, 219

10 Specifications

Symbols in the display

10

400 * Option/accessory, for more information, see Introduction.

Symbol Meaning Page

Information, read display text

72

Main beam on 72, 90

Left-hand direction indi- cators

72

Right-hand direction indi- cators

72

DRIVe - Start/ Stop*

72, 130

Not used -

Other information symbols in the

combined instrument panel

Symbol Meaning Page

Adaptive cruise control*

150, 154, 160

Adaptive cruise control*

160

Symbol Meaning Page

Adaptive cruise control*, Distance Warning* (Distance Alert)

160, 164

Adaptive cruise control*, Distance Warning* (Distance Alert)

160, 164

Adaptive cruise control*

160

Adaptive cruise control*, Distance Warning* (Distance Alert)

155, 162

Adaptive cruise control*, Distance Warning* (Distance Alert)

155, 162

Adaptive cruise control*

154

Radar sensor* 160, 164, 176

Symbol Meaning Page

Start/Stop*, Adap- tive cruise control*

130, 160

- - -

Camera sensor*, Laser sensor*

168, 176, 180, 183

Auto Brake*, Dis- tance Warning* (Distance Alert), City SafetyTM, Collision warning system*

164, 168, 176

G 02 51 02

Fuel-driven engine block heater and passenger com- partment heater*

219

ABL system* 90

Fuel filler flap, right- hand side

295

Low battery 219

Parking brake 139

10 Specifications

Symbols in the display

10

* Option/accessory, for more information, see Introduction. 401

Symbol Meaning Page

Rain sensor* 98

Driver Alert System* 180

Driver Alert Sys- tem*, Lane Depar- ture Warning*

180, 183

Driver Alert Sys- tem*, Lane Depar- ture Warning*

183

Driver Alert Sys- tem*, Time for a break

180

Information symbols in the roof console

display

Symbol Meaning Page

Seatbelt reminder 17

Airbag, passenger seat, activated

22, 23

Airbag, passenger seat, deactivated

23

11 Alphabetical Index

11

402

A

A/V-AUX input.......................................... 282

ACC Adaptive cruise control................. 152

Active Bending Lights (ABL)...................... 90

Active chassis FOUR-C........................ 224

Active Xenon headlamps........................... 90

Adapting driving characteristics.............. 224

Adaptive cruise control............................ 152 fault tracing......................................... 159 radar sensor........................................ 158

Additional heater (Diesel)......................... 221

Adjusting headlamp pattern...................... 94 halogen headlamp................................ 95

Adjusting the steering wheel...................... 85

Airbag activating/deactivating, PACOS........... 22 driver's and front passenger side......... 20 key switch off........................................ 22

AIRBAG ..................................................... 20

Airbag system ........................................... 19

Air conditioning........................................ 215 general................................................ 208

Air conditioning, AC................................. 215

Air conditioning system repair................................................... 338

Air distribution.................................. 209, 217

Air quality system IAQS .......................... 215

Air vents................................................... 210

Alarm.......................................................... 63 alarm indicator...................................... 63 alarm signals......................................... 64 arming................................................... 63 checking the alarm............................... 49 deactivate............................................. 63 deactivating a triggered alarm.............. 64 reduced alarm level.............................. 64

Alcolock................................................... 110

Allergy and asthma inducing substances. 209

All-wheel drive, AWD............................... 132

All Wheel Drive (AWD).............................. 132

Approach light, duration...................... 48, 94

Audio headphones socket............................ 237 rear control panel................................ 237 settings............................................... 239 surround..................................... 232, 239

audio system .......................................... 233

Audio system........................................... 232 functions............................................. 239 overview.............................................. 233

Audio volume .......................................... 233 phone.................................................. 265 phone/media player............................ 265 ring signal, phone............................... 265 speed/noise compensation................ 239

Auto climate control settings...................... 214

Automatic car washes............................. 364

Automatic gearbox.................................. 121 manual gear positions (Geartronic)..... 122 towing and recovery........................... 311 trailer................................................... 306

Automatic locking...................................... 57

Automatic relocking................................... 56

Auxiliary heater........................................ 221

AUX input......................................... 233, 255

AWD, All-wheel drive............................... 132

11 Alphabetical Index

11

403

B

Backrest..................................................... 80 front seat, lowering............................... 80

Backrest rear seat, lowering...................... 83

Bag holder .............................................. 300

Battery............................................. 348, 386 headphones........................................ 282 maintenance....................................... 348 remote control ................................... 279 remote control key/PCC....................... 51 start assistance................................... 119 symbols on the battery....................... 349 warning symbols................................. 349

Blind spot (BLIS)...................................... 191

BLIS......................................................... 191

Bluetooth handsfree ........................................... 261 media ................................................. 258 microphone off .................................. 264 streaming audio ................................. 258 transfer call to mobile ........................ 264

Bonnet, opening...................................... 332

Brake and clutch fluid.............................. 337

Brake light.................................................. 91

Brakes...................................................... 133 anti-lock braking system, ABS........... 133 brake light............................................. 91 brake system...................................... 133 electric parking brake......................... 137 Emergency Brake Assistance, EBA ... 133 emergency brake lights........................ 91 filling brake fluid.................................. 338 handbrake........................................... 137 symbols in the combined instrument panel................................................... 134

Bulbs, see Lighting.................................. 339

C

Calls incoming............................................. 263 operation............................................. 263

Camera sensor................................ 166, 175

Car care................................................... 364

Car care, leather upholstery.................... 366

Cargo area cargo cover......................................... 304 lighting.................................................. 93 loading................................................ 299 mounting points.................................. 300

safety grille.......................................... 303 safety net............................................ 302

Cargo cover............................................. 304

Car upholstery......................................... 366

Car wash.................................................. 364

Catalytic converter................................... 296 recovery.............................................. 312

CD ........................................................... 251

Centre console........................................ 200

Chassis settings...................................... 224

Checking and topping up the coolant..... 336

Checking the engine oil level................... 333

Children..................................................... 32 child safety locks.................................. 40 child seats and side airbags................. 24 location in the car................................. 32 safety.................................................... 32

Child safety locks...................................... 62

Child seat................................................... 32

Child seats................................................. 32 integrated two-stage booster cushion. 38 ISOFIX fixture system for child seats. . . 40 recommended...................................... 33

11 Alphabetical Index

11

404

size classes for child seats with the ISO- FIX fixture system................................. 40 upper mounting points for child seats.. 43

Cigarette lighter socket............................ 226

City Safety............................................ 165

Cleaning automatic car washes......................... 364 car wash............................................. 364 rims..................................................... 365 seatbelts............................................. 367 upholstery........................................... 366

Clean Zone Interior Package (CZIP)........ 209

Climate control........................................ 208 general................................................ 208 sensors............................................... 208

Clock, setting............................................. 75

CO2 emissions ........................................ 382

Collision..................................................... 31

Collision warning............................. 170, 171

Collision warning system radar sensor........................ 158, 165, 170

Collision Warning with Auto Brake*......... 170

Colour code, paint................................... 368

Combined instrument panel.............. 71, 198

Comfort inside the passenger compart- ment......................................................... 225

Compass................................................. 106 calibration........................................... 106

Condensation in headlamps.................... 364

controls centre console ................................... 233

Controls centre console.................................... 200

Controls, lights........................................... 86

Control symbols......................................... 72

Cooling system........................................ 292

Crash, see Collision................................... 31

Cruise control.......................................... 150

Curtain panorama roof.................................... 107

CZIP (Clear Zone Interior Package)......... 209

D

DAB Radio............................................... 248

Deadlock deactivation.......................................... 60 temporary deactivation......................... 60

Deadlocks.................................................. 60

Defroster.................................................. 215

Diesel....................................................... 297

Diesel particle filter.................................. 298

Dipstick, electronic.................................. 335

Direction indicators.................................... 92

Disengaging the gear selector inhibitor... 123

Display lighting.......................................... 86

Distance Warning.................................... 162

Dolby Surround Pro Logic II.................... 232

Door mirrors............................................. 103

Driver Alert Control.................................. 179

Driver Alert System.................................. 178

Driving...................................................... 292 cooling system.................................... 292 with the tailgate open......................... 293 with trailer........................................... 305

Driving in water........................................ 292

Driving with a trailer towball load........................................ 374 towing capacity.................................. 374

DSTC, see also Stability control system.. 147

DVD ......................................................... 251

11 Alphabetical Index

11

405

E

ECC, electronic climate control............... 211

Economical driving.................................. 292

ECO pressure.......................................... 323

Eco Start/Stop DRIVe.............................. 126

Electrical socket...................................... 227 cargo area........................................... 300 front seat............................................. 227

Electric parking brake.............................. 137 low battery voltage............................. 137 releasing automatically....................... 138 releasing manually.............................. 138

Emergency equipment warning triangle.................................. 324

Emergency puncture repair..................... 325

Emissions of carbon dioxide................... 298

Engine overheating......................................... 305 starting................................................ 114

Engine block heater fuel-driven........................................... 218

Engine braking, automatic....................... 135

Engine compartment coolant................................................ 336 oil........................................................ 333 overview.............................................. 333 power steering fluid............................ 338

Engine drag control ................................ 146

Engine oil......................................... 333, 378 adverse driving conditions.................. 378 capacities........................................... 378 filter..................................................... 333 oil grade.............................................. 378

Engine specifications............................... 377

Environmental labelling, FSC, owner's manual....................................................... 12

Error messages Adaptive Cruise Control..................... 160 Driver Alert Control............................. 180 Lane Departure Warning..................... 183 see Messages and symbols....... 139, 160

Error messages in BLIS........................... 193

Error messages in Distance Alert............ 164

ERS - Remote Start................................. 115

ETC, electronic temperature control ....... 212

Expectant mothers, seatbelt...................... 17

External dimensions................................ 374

F

Fan........................................................... 213

Fault tracing for the camera sensor. 167, 175

First aid equipment.................................. 324

First aid kit .............................................. 324

Fluids, capacities..................................... 380

Fluids and oils.......................................... 380

Fog lamps rear........................................................ 91

Foot brake............................................... 133

FOUR-C Active chassis........................ 224

FSC, environmental labelling..................... 12

Fuel.......................................................... 296 fuel consumption................................ 382 fuel economy...................................... 323 fuel filter.............................................. 297

Fuse box.................................................. 353 glovebox............................................. 358

Fuses....................................................... 353 box in cargo area................................ 361 changing............................................. 353 cold zone............................................ 362 general................................................ 353

11 Alphabetical Index

11

406

relay/fuse box in engine compartment 354 Start/Stop........................................... 362

Fuse table fuses in engine compartment............. 355

G

Gearbox................................................... 120 automatic............................................ 121 manual................................................ 120

Gear selector inhibitor............................. 123

Gear selector inhibitor, mechanical disen- gagement................................................. 123

Geartronic................................................ 122

Glass laminated/reinforced........................... 101

Global opening........................................ 208

Glovebox................................................. 226 locking.................................................. 57

Gross vehicle weight............................... 374

GSI - Gear selector assistance................ 120

H

Handbrake............................................... 137

Hazard warning flashers............................ 92

HDC......................................................... 135

Headlamp levelling.................................... 86

Headlamp pattern, adjusting..................... 94

Headlamp pattern adjustment Active Bending Lights .......................... 95

Headlamps............................................... 339

Headphones battery replacement............................ 282 wireless............................................... 281

Headphones socket................. 237, 280, 282

Head restraint centre seat, rear.................................... 82 lowering.......................................... 83, 84

Heated washer nozzles.............................. 99

Heating.................................................... 214 rearview and door mirrors.................. 104 rear window........................................ 104 seats................................................... 213

Heat-reflecting windscreen...................... 101

High engine temperature......................... 305

High-pressure headlamp washing............. 99

Hill Descent Control................................. 135

HomeLink .............................................. 141

Home safe lighting..................................... 94

Hoot........................................................... 85

Horn........................................................... 85

I

IAQS Interior Air Quality System........... 209

IC Inflatable Curtain................................ 26

Ignition keys............................................... 78

Immobiliser................................................ 46

Indicator lamps, PCC................................ 49

Inflatable curtain........................................ 26

Information button, PCC............................ 49

Information displays.................................. 71

Infotainment system ............................... 232 menus ................................................ 236 overview ............................................. 233 source buttons ................................... 233 voice control....................................... 270

Inlaid mats............................................... 227

Instrument lighting, see Lighting................ 86

11 Alphabetical Index

11

407

Instrument overview left-hand drive....................................... 68 right-hand drive.................................... 70

Instruments and controls........................... 68

Interior lighting, see Lighting..................... 92

Interior rearview mirror............................. 105 automatic dimming............................. 105

Intermittent wiping..................................... 98

iPod , connection................................... 255

J

Jack......................................................... 320

K

Kerb weight.............................................. 374

Key............................................................. 46

Key blade................................................... 50

Keyless drive...................................... 53, 114

Keyless start (keyless drive)............... 53, 114

Keypad in the steering wheel................................. 85, 150, 201, 234

Key positions............................................. 78

L

Labels...................................................... 372

Laminated glass....................................... 101

Lamps, see Lighting................................ 339

Lane Departure Control........................... 182

Laser sensor................................................ 9

Leather upholstery, washing instructions 366

Lighting.................................................... 339 Active Xenon headlamps...................... 90 approach light, duration................. 48, 94 automatic lighting, passenger compart- ment...................................................... 93 bulbs, specifications........................... 344 controls................................................. 92 display lighting...................................... 86 headlamp levelling................................ 86 home safe lighting................................ 94 in passenger compartment................... 92 instrument lighting................................ 86 main/dipped beam............................... 87 position/parking lamps......................... 91 rear fog lamp........................................ 91 tunnel detection.................................... 90

Lighting, bulb replacement...................... 339 cargo area........................................... 343 dipped beam halogen......................... 340 direction indicators............................. 341 main beam, Xenon lamp..................... 341 main beam halogen............................ 341 number plate lighting.......................... 343 side marker lamps.............................. 342 vanity mirror........................................ 344

Light switches............................................ 86

Loading cargo area........................................... 299 general................................................ 299 mounting points.................................. 300 roof load............................................. 299

Lock confirmation ..................................... 46

Locking/unlocking inside.................................................... 56 tailgate.................................................. 57

Locks automatic locking................................. 56 locking.................................................. 56 unlocking.............................................. 56

Lubricants................................................ 380

Lubricants, capacities.............................. 380

11 Alphabetical Index

11

408

M

Main/dipped beam, see Lightning............. 87

Main beam, automatic activation.............. 88

Maintenance rustproofing........................................ 366

Making calls............................................. 263

Manual gearbox....................................... 120 GSI - Gear selector assistance........... 120 towing and recovery........................... 311

Manual gear positions (Geartronic).......... 122

Max. roof load ......................................... 374

Media, Bluetooth ................................... 258

media player ........................................... 251

Memory function in seats.......................... 81

Menu navigation, Infotainment ............... 236

Menu navigation RSE.............................. 286

Menus/functions...................................... 202

Menus and messages.............................. 198

Menu structures RSE....................... 286, 287

Menu system MY CAR............................ 200

Messages and symbols Adaptive Cruise Control..................... 160 Collision Warning with Auto Brake.......................................... 168, 176 Distance Alert..................................... 164 Driver Alert Control............................. 180 Lane Departure Warning..................... 183

Messages in BLIS.................................... 193

Messages in the combined instrument panel........................................................ 198

Messages in the information display....... 147

Meters fuel gauge............................................. 72 speedometer......................................... 72 tachometer........................................... 72

Microphone.............................................. 261

Misting..................................................... 215 attending to the windows................... 208 condensation in headlamps............... 364 remove with the air vents................... 217 timer function...................................... 215

Mobile phone connect............................................... 262 handsfree............................................ 261 register phone..................................... 262 voice control....................................... 270

Mood lighting............................................. 94

MY CAR................................................... 200

O

Oil, see also Engine oil............................. 378

Oil level low.............................................. 333

Overheating............................................. 305

Owner's manual, environmental labelling.. 12

P

PACOS....................................................... 22

PACOS, switch.......................................... 22

Paintwork colour code......................................... 368 damage and touch-up........................ 368

Panel lighting............................................. 86

Panic function............................................ 48

Panorama roof curtain................................................. 107 opening and closing........................... 107 ventilation position.............................. 108

11 Alphabetical Index

11

409

Park assist camera.................................. 188

Parking assistance................................... 185 parking assistance sensors................ 187

Parking brake........................................... 137

Parking heater.......................................... 218 battery and fuel................................... 218 parking on a hill.................................. 218 time setting......................................... 220

Passenger compartment......................... 225

Passenger compartment filter................. 208

Passenger compartment heater fuel-driven........................................... 218

PCC Personal Car Communicator functions............................................... 47 range............................................... 48, 49

Pedestrian protection.............................. 170

Petrol grade............................................. 296

Phone connect............................................... 262 handsfree............................................ 261 incoming calls..................................... 263 making calls........................................ 263 phone book......................................... 265 phone book, shortcut......................... 265 receiving a call.................................... 264

register phone..................................... 262 voice control....................................... 270

Polishing.................................................. 365

Position/parking lamps.............................. 91

Power panorama roof.............................. 107

Power seat................................................. 81

Powershift gearbox.......................... 124, 311

Power windows....................................... 101

Puncture, see Tyres................................. 320

Q

Queue Assist............................................ 156

Queue Assistant....................................... 156

R

Radar sensor........................................... 152 limitations........................................... 158

Radio ...................................................... 244 AM/FM ............................................... 244 DAB ................................................... 248

Rain sensor................................................ 98

Rear bulbs location............................................... 342

Rear control panel audio system...................................... 237

Rear-seat entertainment.......................... 280

Rear TV screens...................................... 280

Rearview and door mirrors compass............................................. 106 door.................................................... 103 electrically retractable......................... 104 heating................................................ 104 interior................................................. 105

Rear window, defrosting.......................... 104

Recirculation............................................ 215

Recommendations during driving............ 292

Recommended child seats, table.............. 33

Recovery.................................................. 313

Refrigerant............................................... 338

Refuelling................................................. 295 fuel cap............................................... 295 fuel filler flap, electrical opening......... 295 fuel filler flap, manual opening............ 295 refuelling............................................. 295

Relay/fuse box: see Fuses....................... 353

11 Alphabetical Index

11

410

Remote control ....................................... 278 battery replacement ........................... 279

Remote control, HomeLink programmable ................................... 141

Remote control key................................... 46 battery replacement.............................. 51 detachable key blade........................... 50 functions............................................... 47 range..................................................... 48

Remote control key system, type appro- val............................................................ 387

Remote Start - ERS................................. 115

Resetting the door mirrors....................... 104

Resetting the power windows................. 103

Retractable power door mirrors............... 104

Reverse gear inhibitor.............................. 121

Rims cleaning.............................................. 365

Road sign information............................. 148

Roll-over protection................................... 29

Roof load, max. weight ........................... 374

ROPS (Roll Over Protection System)......... 29

ROPS (Roll Over Protection System) (Roll- over protection).......................................... 29

RSE - Rear Seat Entertainment system... 280

Rustproofing............................................ 366

S

Safety grille.............................................. 303

Safety mode.............................................. 31

Safety net................................................. 302

Seat, see Seats.......................................... 80

Seatbelt rear seat................................................ 17 seatbelt tensioner................................. 18

Seatbelt reminder...................................... 17

Seatbelts.................................................... 16

Seats.......................................................... 80 head restraints, rear.............................. 82 heating................................................ 213 lowering the front backrest................... 80 lowering the rear backrest.................... 83 power seats.......................................... 81

Securing loads (Loading)......................... 300

Sensus....................................................... 77

Service position....................................... 345

Service programme................................. 332

Set time interval....................................... 162

Side airbags............................................... 24

Signal input, external....................... 233, 255

SIPS bags.................................................. 24

Soot filter................................................. 298

Soot filter full............................................ 298

Spare wheel............................................. 320 temporary spare................................. 320

Spin control............................................. 146

Spin control function............................... 146

Stability and traction control system....... 146

Stability system....................................... 146

Stains....................................................... 366

Start assistance....................................... 119

Steering force, speed related.................. 224

Steering force level, see Steering force... 224

Steering lock............................................ 115

Steering wheel........................................... 85 keypad.......................... 85, 150, 201, 234 keypad, adaptive cruise control......... 154 steering wheel adjustment.................... 85

Stone chips and scratches...................... 368

Storage spaces in the passenger compart- ment......................................................... 225

11 Alphabetical Index

11

411

Surround.......................................... 232, 239

Symbols................................................... 147 indicator symbols................................. 72 warning symbols................................... 72

Symbols and messages Adaptive Cruise Control..................... 160 Collision Warning with Auto Brake.......................................... 168, 176 Distance Alert..................................... 164 Driver Alert Control............................. 180 Lane Departure Warning..................... 183

T

Tailgate...................................................... 58 locking/unlocking.................................. 57 open...................................................... 59

Temperature actual temperature............................. 208

Temperature control................................ 214

Timer........................................................ 215

Tools........................................................ 320

Total airing function........................... 57, 208

Towbar detachable, attachment ..................... 308 detachable, removal .......................... 309

Towbar, see Towing equipment.............. 306

Towing..................................................... 311 towing eye.......................................... 312

Towing capacity....................................... 374

Towing equipment................................... 306 specifications...................................... 307

Towing eye.............................................. 312

Trailer....................................................... 305 cable................................................... 305 driving with a trailer............................ 305 snaking............................................... 310

Trailer stability assist .............................. 146

Trailer Stability Assist.............................. 310

Transmission............................................ 120

Transponder............................................ 101

Trip computer.......................................... 222

Trip meter.................................................. 75

Troubleshooting Adaptive Cruise Control..................... 159

TSA - trailer stability assist ............. 146, 310

Tunnel detection........................................ 90

TV............................................................. 274

Type approval, remote control key sys- tem........................................................... 387

Type designation..................................... 372

Tyres direction of rotation............................ 316 driving characteristics......................... 316 maintenance....................................... 316 pressure.............................................. 323 puncture repair................................... 325 specifications...................................... 319 speed ratings...................................... 319 tread wear indicators.......................... 317 winter tyres......................................... 318

U

Unlocking from the inside...................................... 56 from the outside................................... 56

USB, connection...................................... 255

11 Alphabetical Index

11

412

V

Vanity mirror...................................... 93, 227

Ventilation................................................ 209

Vibration damper..................................... 306

Voice control, mobile phone.................... 270

Volvo Sensus............................................. 77

W

Warning lamp adaptive cruise control....................... 152 collision warning system.................... 173 stability and traction control system. . 146

Warning lamps airbags SRS.......................................... 74 alternator not charging......................... 74 fault in brake system............................ 74 low oil pressure..................................... 74 parking brake applied........................... 74 seatbelt reminder.................................. 74 warning................................................. 74

Warning sound collision warning system.................... 173

Warning symbol, airbag system................ 19

Warning symbols....................................... 72

Warning triangle....................................... 324

Washer fluid, filling................................... 347

Washer nozzles, heated............................. 99

Washers rear window.......................................... 99 washer fluid, filling.............................. 347 windscreen........................................... 99

Water and dirt-repellent coating.............. 101

Water-repellent surface, cleaning............ 365

Waxing..................................................... 365

Weights kerb weight......................................... 374

Wheels changing............................................. 320 installation........................................... 321 rims..................................................... 317 snow chains........................................ 318 spare wheel........................................ 320

Wheels and tyres..................................... 316

Whiplash injury, WHIPS............................. 27

WHIPS child seat/booster cushion................... 27 whiplash injury...................................... 27

Windows, rearview and door mirrors....... 101

Windscreen washing.................................. 99

Windscreen wipers.................................... 98 rain sensor............................................ 98

Winter driving........................................... 293

Winter tyres.............................................. 318

Wiper blades............................................ 345 changing........................

Manualsnet FAQs

If you want to find out how the XC60 Volvo works, you can view and download the Volvo XC60 2013 Owners Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Volvo XC60 as well as other Volvo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Volvo XC60. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Volvo XC60 2013 Owners Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Volvo XC60 2013 Owners Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Volvo XC60 2013 Owners Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Volvo XC60 2013 Owners Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Volvo XC60 2013 Owners Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.