Contents

Volvo XC60 Road and Traffic Information 2014 Instruction Manual PDF

1 of 88
1 of 88

Summary of Content for Volvo XC60 Road and Traffic Information 2014 Instruction Manual PDF

WEB ED IT ION

ROAD AND TRAFF IC INFORMAT ION RT I

Road type Colour

Motorway Orange

Primary road Dark grey

Smaller primary road Grey

Ordinary road Light grey

Local road White

Text and symbols on screen

Event at next guidance point

Distance to next guidance point

Name of next road/street

Facility (Restaurant)

Planned route final destination

Symbol for destination/final destination

Calculated arrival time at final destination

Planned route waypoint

Calculated remaining distance to destination

Maximum permitted speed - at car's current position (17) [Not in cars with RSI.]

Compass

Traffic information

Section covered by traffic information

Current road/street name - at car's current position (17)

Next guidance point

Planned route

The car's current position

Stored location

Completed planned route

Planned route start

Map scale

ROAD AND TRAFFIC INFORMATION - RTI Volvo's navigation system is a traffic infor- mation and road navigation system devel- oped by Volvo. The system guides you to a

destination and gives information along the route. It informs of situations that can affect the drive, such as accidents, road works and shows alterna- tive routes.

It is possible to create an itinerary, search for facilities along the route, store special places etc. The system displays the car's exact position and in event of a wrong turning always corrects to guide you to the destination.

You will see just how intuitive it is to use. Try it out. In order to get along with the system we rec- ommend that you familiarise yourself with the information in this manual.

By facilitating accessibility and shortening driving distances, Volvo's navigation system contributes to a better environment.

License agreement NAVTEQ DATABASE

For information for the end user - see page 78.

Table of contents

2

01

01 Quick Guide Quick start................................................... 8

02

02 Get to know your navigation system

Manual...................................................... 12 Before starting.......................................... 14 Overview................................................... 16 Controls.................................................... 19 Voice recognition...................................... 22 Keyboard................................................... 25 DVD disc, screen...................................... 27 Maps, road types and compass............... 30 Menus....................................................... 32 Menu tree in three levels........................... 34 03

03 Planning your trip Specify a destination................................ 40 Itinerary..................................................... 47 Current position........................................ 50 Settings..................................................... 51 Simulation................................................. 60

Table of contents

3

04

04 Traffic information General...................................................... 64 Reading information.................................. 66 Handling traffic problems.......................... 68

05

05 Symbols on the map Facilities.................................................... 72

06

06 Questions and answers Frequently asked questions...................... 76 EULA - License agreement....................... 78 Copyright.................................................. 80

Table of contents

4

07

07 Alphabetical Index Alphabetical Index.................................... 82

Table of contents

5

6

Quick start................................................................................................. 8

QUICK GUIDE

01 Quick Guide

Quick start 01

8

Activating the system The car's electrical system must first be acti- vated:

1. Press the remote control key into the igni- tion switch and activate key position I (see the owner's manual for the car).

2. If the navigation system does not start within a few seconds - press the centre console's NAV button.

Disclaimer When the navigation system is started the display screen shows a text which must be confirmed:

Press the OK button.

For more information, see page 14.

Controls Volvo's GPS navigator can be operated in several ways:

With the steering wheel's right-hand key- pad

With the controls in the centre console

With a remote control

With voice recognition.

For a functional description, see page 19.

Main commands The steering wheel keypad is used in the fol- lowing two examples to give guidance to an Address or Facility.

Scroll/select in the menus with the Thumbwheel (1).

Activate selections with a brief press on the Thumbwheel (abbreviated in the fol- lowing example with "+ OK".

Go back in menus and/or undo using EXIT (2).

Centre console controls If the centre console keypad is used instead of the steering wheel keypad then the follow- ing applies:

Keypad in steering wheel

Centre con- sole

Turn the Thumbwheel Turn TUNE

Press the Thumbwheel Press OK

Press EXIT Press EXIT

Guidance to a street address

Step Display screen/ menu

Action

1 If the display screen does not show a map image, proceed as follows:

Press the centre console button NAV.

2 Map Press NAV to dis- play the "Short- cuts" menu.

3 Shortcuts menu, see page 32.

Select Set address + OK.

4 Set destina- tion

Select Address + OK.

01 Quick Guide

Quick start 01

9

Step Display screen/ menu

Action

5 Address: Select City: + OK.

6 Daisy wheel - see page 25.

Turn the Thumb- wheel to select characters and enter it by click- ing OK - a list of options emerges on the display screen.

7 Daisy wheel Select the appro- priate district from the list + OK.

8 Navigation menu

Select Set single destination + OK.

9 Map Guidance starts - follow the instruc- tions.

The navigation system calculates the route, travel time and distance to the selected desti-

nation. The system provides guidance and instructions on junctions etc.

If there is a deviation from the planned route outline during the journey then the system automatically calculates a new route outline.

Guidance to a facility (POI)

Step Display screen/ menu

Action

1 If the display screen does not show a map image, proceed as fol- lows:

Press the centre console button NAV.

2 Map Press NAV to bring up a menu.

3 Shortcuts menu, see page 32.

Select Set Point Of Interest + OK.

4 Set destina- tion

Select Point of interest (POI) + OK.

5 Point of inter- est (POI)

Select e.g. Near the car + OK.

Step Display screen/ menu

Action

6 Latest 5 POI types

Select e.g. All types + OK.

7 All POI types Select e.g. Air- port + OK.

8 Results list Select the desired option from the list + OK.

9 Navigation menu

Select Set sin- gle destination + OK.

10 Map Guidance starts - follow the instructions.

10

Manual.................................................................................................... 12 Before starting........................................................................................ 14 Overview................................................................................................. 16 Controls................................................................................................... 19 Voice recognition.................................................................................... 22 Keyboard................................................................................................. 25 DVD disc, screen.................................................................................... 27 Maps, road types and compass............................................................. 30 Menus..................................................................................................... 32 Menu tree in three levels......................................................................... 34

GET TO KNOW YOUR NAVIGATION SYSTEM

02 Get to know your navigation system

Manual

02

12

Heading level 1

Heading level 2 The content under this heading is part of Heading level 1.

Heading level 3 The content under this heading is part of Heading level 2.

Heading level 4

The content under this heading is part of Heading level 3.

General information on the manual There is a quick guide for the user who wants to get started right away - see page 8.

For a more in-depth description of the opera- tion and options as well as the selection of settings to the destination, the recommenda- tion is to read the manual in combination with practical use.

Menu options/Search paths All options that can be selected on the dis- play screen are marked in this manual with slightly larger and grey-shaded text, e.g. Set destination.

Search paths in the menu tree are stated as e.g.:

Set destination Address City:

English text The manual's images are common to all mar- kets and languages so where they contain text it is mainly in English.

In order to facilitate the user's understanding of the images and their menu options with search paths connected to the manual's text, the English word for the image is in brackets immediately after the intended text/phrase in the language of the manual:

Set destination Address

(Set destination > Address)1

Special text

NOTE

NOTE

Texts marked with NOTE provide advice or tips to facilitate use of e.g. features and functions.

Footnote There is information in the manual that is added as a footnote at the bottom of the page or in direct association with a table. This

1 Not in English manuals - but shown here as an example.

02 Get to know your navigation system

Manual

02

13

information is a supplement to the text to which it refers via the footnote number/letter.

Options All types of options/accessories are marked with an asterisk (*).

In addition to standard equipment, this man- ual also describes options (factory fitted equipment) and certain accessories (retrofit- ted extra equipment).

The equipment described in this owner's manual is not available in all cars - they have different equipment depending on adapta- tions for the needs of different markets and national or local laws and regulations.

In the event of uncertainty over what is stand- ard or an option/accessory - contact a Volvo dealer.

Changes in the manual The specifications, design features and illus- trations in this owner's manual are not bind- ing.

We reserve the right to make modifications without prior notice.

Volvo Car Corporation

02 Get to know your navigation system

Before starting

02

14

General The Volvo navigation system uses reference system WGS84, which gives longitude and latitude positions.

The car's navigation system can be used without a destination being selected.

Map position Upon start-up, the navigation system shows an on-screen text message, which must be confirmed by pressing the OK/MENU button. The text is as follows:

This system provides route information to help you reach your destination. Due to road conditions, some recommendations may not be accurate. Obey all traffic laws and drive based on your own good judgement. Always concentrate on your driving by keeping your eyes and mind on the road.

Then a map of the current geographic area is shown where the car is symbolised by a blue triangle.

Settings The system is supplied with default settings, but starts with the settings last used.

There is a function that resets all settings to default settings simultaneously, see page 58.

On/Off

On 1. Push the remote control key into the igni-

tion switch.

2. The screen activates automatically in the key position I (see the car's manual).

3. Press the centre console's button NAV if the navigation system does not start automatically.

4. Press OK when the "Start up" text appears on-screen, see previous section "Map mode".

The system may need a few seconds in order to detect the position and movement of the car.

Off The navigation system is shut down when the remote control key is removed from the igni- tion switch.

The Navigator cannot be switched off man- ually, but always works in the background after the "Start up" sequence. If the naviga- tion system is not to be switched on:

Press EXIT at the "Start up" sequence, see section "Map mode".

NOTE

The navigation system is also available when the engine is switched off. When the battery level gets too low the system switches off.

Demo (simulated guidance) To see how the system works, guidance to an indicated destination can be simulated on- screen - see page 60.

02 Get to know your navigation system

Before starting

02

15

02 Get to know your navigation system

Overview

02

16

NOTE: The picture is schematic - some details may vary depending on car model and market.

02 Get to know your navigation system

Overview

02

}} 17

Antenna for GPS The antenna is integrated into the roof antenna.

Voice recognition Some procedures in the Navigation system can also be voice controlled. The microphone (2a) is fitted in the ceiling and the activation button (2b) is located on the right-hand key- pad on the steering wheel. For more informa- tion, see page 22.

Main unit The main unit is fitted in and behind the cen- tre console and includes the following func- tions:

Calculating the position of the car

Calculating the route to the specified des- tination

Handling traffic information

Voice guidance

DVD player

Receiver for GPS and traffic information (TMC1) is integrated into the main unit.

Positioning The car's speed sensor and a gyro calculate the current position and the direction of travel of the car using signals from the GPS satellite system.

The advantage of this concept is that the Navigation system registers and calculates the route outline even if the GPS signal is temporarily lost, e.g. when driving through a tunnel.

Traffic information TMC1 is a standardised coding system for traffic information. The receiver automatically searches for the correct frequency. Reception takes place via the FM antenna.

NOTE

TMC is not available in all areas/countries. The system's coverage area is under con- stant construction and updating may sometimes be necessary.

For information about updating map data and software, see page 27.

Screen The screen displays maps and provides detailed information on route type, distance, menus etc. For information screen care, see page 28.

Keypad, centre console As an alternative to the steering wheel key- pad, the centre console's numerical keypad can be used in combination with buttons OK/ MENU, TUNE and EXIT to scroll between dif- ferent menu options, confirm options or go back in menus, see page 19.

Volume control and IR receiver Use the audio unit's volume control during ongoing voice messages to adjust the vol- ume, see page 31. The volume can also be adjusted in the menu system.

Point the remote control towards the centre console during use - its IR receiver is located there.

1 Traffic Message Channel

02 Get to know your navigation system

Overview

02

18

Keypad, steering wheel A keypad is located on the right-hand side of the steering wheel. Use it to scroll between different menu options, to confirm selections or to move back in menus, see page 19.

Speakers Navigation system audio uses the front loud- speakers.

02 Get to know your navigation system

Controls

02

}} * Option/accessory, for more information, see Introduction. 19

General information about controls The navigation system is operated by con- trols on the centre console, the steering wheel keypad or using a remote control*. The three different control unit keypads have common functions but differ in appearance and operation. The design may also vary depending on market.

The system can also be controlled by voice recognition using specific commands - see page 22.

Centre console

Centre console keypad.

NAV activates the GPS navigator on the display screen. With GPS activated, a quick menu opens/closes, see page 32.

Numerical keys enter information for address and name search, and scroll on the map, see pages 25 and 32.

Press OK/MENU once to confirm or acti- vate a selection. Described in this manual with the "OK button" or "+ OK".

Turning TUNE scrolls between different menu options or zooms when the map image is shown. Described in this manual with the "TUNE knob".

Press EXIT once to go back in the menu structure or undo a selection.

Steering wheel The steering wheel's keypad is available in several versions depending on market and selection of audio system.

Steering wheel right-hand keypad.

Turn the thumbwheel to scroll between different menu options or zoom when the map image is shown.

Press the thumbwheel to confirm/acti- vate a selection.

EXIT goes back in the menu structure or undoes a selection.

02 Get to know your navigation system

Controls

02

20

Voice recognition See page 22.

Remote control The remote control can be used to control/ operate several different functions in the car - only the related navigation system is descri- bed here.

Point the remote control at the centre console during use.

Remote control keypad.

NAV activates the GPS navigator on the display screen. With GPS activated, a quick menu opens/closes, see page 32

EXIT goes back in the menu structure or undoes a selection.

OK/MENU confirms or activates a selec- tion. Described in this manual with the "OK button" or "+ OK".

Arrow keys move the menu cursor.

Numerical keys enter data for address and name search, and scroll on the map.

NOTE

If the remote control does not work, try replacing with new AA/LR6 batteries first of all.

WARNING

Store the remote control and other similar objects in one of the storage compart- ments - in the event of sudden braking or a collision such objects could cause per- sonal injury or material damage.

Additional information

02 Get to know your navigation system

Controls

02

21

Sometimes there is more information availa- ble than can fit on the menu bar - the line then ends with the character: "#".

To view the rest of the information:

Press the INFO button.

02 Get to know your navigation system

Voice recognition

02

22

General about Voice control Voice control means that certain functions in the navigation system can be activated by the spoken word.

The Voice commands offer comfort and help the driver to avoid distraction - instead the driver can concentrate on driving and focus attention on the road and traffic situation.

WARNING

The driver always holds overall responsibil- ity for driving the vehicle in a safe manner and complying with all applicable rules of the road.

The Voice control uses the common micro- phone of the hands-free system - the driver receives responses to the Voice control through the vehicle's loud speakers.

The microphone is positioned in the ceiling in front of the driver for optimal take-up of the driver's speech - it can however be disturbed by/pick up loud voices from passengers.

Handling

Keypad in steering wheel.

Button for voice control

Activating the system A short press on the steering wheel but-

ton (1) activates the voice recognition system - a voice command can be given after the tone.

Think of the following when using the voice recognition system:

For commands - Speak after the tone with a normal voice at a normal tempo

The car's doors, windows and sunroof must be closed

Avoid background noise in the passenger compartment.

NOTE

If the driver is unsure of which command to use, he/she can say "Help" - the sys- tem then responds with several different commands which can be used in the cur- rent situation.

Voice commands can be disabled by:

not speaking

saying "Cancel"

hold the steering wheel button for Voice recognition depressed for a cou- ple of seconds

press EXIT

press one of the centre console's but- tons NAV, RADIO, MEDIA, MY CAR or CAM.

Use the voice command Entering information in the navigation system using the voice command is very simple because the screen lists the frequently occur- ring commands to be used in the relevant sit- uation.

Starting A voice command is started as follows:

02 Get to know your navigation system

Voice recognition

02

}} 23

1. Press the steering wheel button for Voice control - the display lists examples of possible commands.

2. For example, select "Navigation" - wait for the tone and state the word clearly and in normal conversational tone.

3. The screen shifts to the option "Repeat instruction/Navigation go to address/ Itinerary" - Select and say "Itinerary".

Note that greyed out text and text in brackets is not included in the spoken command.

NOTE

Greyed-out menu bars and options on the screen are temporarily not selectable.

The command can be given in several ways The command "Navigation go to address" can be stated as:

"Navigation > Go to > Address" - Say "Navigation", wait for the system response in the form of suitable on- screen options. Continue by saying, for example, "Go to" and conclude with "Address".

or

Say the whole command in one sequence - "Navigation go to address".

Tips Some good advice:

Give a command by first pressing the voice button and then speaking naturally after the tone.

To respond to the voice recognition sys- tem - speak after the tone at the end of the question.

To interrupt the voice session - press and hold the voice button or press the EXIT button.

The driver can obtain help during a dia- logue by saying "Help" after a listening tone.

The dialogue with the system can be speeded up - Interrupt the system's speech with a short press on the button's voice button, wait for a tone and then start talking.

The voice recognition system asks up to 3 times for an answer. If no answer is given by the driver during this time then the session is concluded.

Example Here are some normal commands:

Navigation go to address

Navigation go to POI

Navigation delete next waypoint

Navigation cancel guidance.

NOTE

A complete list of quick commands is available in the MY CAR menu - Go to Settings Voice settings Voice command list Navigation commands.

Help functions and settings In the menu system MY CAR there are pro- grams where the driver can practice the dif- ferent functions in the voice recognition sys- tem. To describe the menu system MY CAR - see the car's normal instruction manual.

The better the driver knows the voice recog- nition system, the more comfortable the driver will be using the functions. Practicing using the integrated practice programs is therefore recommended.

NOTE

The exercise programs are only accessible when the car is stationary with the parking brake applied.

Introduction to voice control The program Voice tutorial gives the driver step by step instructions in the use of the voice recognition system and is a simple way

02 Get to know your navigation system

Voice recognition

02

24

of becoming familiar with the methods of giv- ing commands.

The program can be started in two ways:

Press the steering wheel button for voice control and say "Voice tutorial".

or

Activate the program in MY CAR - Go to Settings Voice settings Voice tutorial.

Voice training The program Voice training teaches the voice recognition system to recognise the driver's voice and speech pattern. It is also possible to create a second user profile - an advantage if more than one person is likely to use the car/system regularly.

The voice training is started in MY CAR - Go to Settings Voice settings Voice training User 1 or User 2.

NOTE

Menu option Default setting can only be changed to User 1 after a lesson on Voice training has been completed.

More settings in MY CAR User profile - 2 x different user profiles

can be set. Go to Settings Voice

settings Voice user setting. Tick one of the options Default setting, User 1 or User 2.

Voice volume - Go to Settings Voice settings Voice output volume and select the desired level.

The system's voice volume can also be adjusted using the centre console TUNE knob when the system is speaking.

Language The voice recognition system is under con- stant development and at time of printing the following languages were available:

English (UK)

English (US)

French (CAN)

French (FRA)

Dutch

Italian

Spanish (EU)

Spanish (US)

Swedish

German

NOTE

The voice recognition system in combina- tion with GPS navigation only works with the languages listed here.

To change the language - Go to Settings System options Language and select.

The languages that are included in the voice recognition system have this icon in the language list.

Language dependent user profile The voice recognition system only under- stands the language set in System options.

Say that user profile User 1 is stored by a Swedish speaking driver with the system set in Swedish. If the driver changes the car lan- guage to English the user profile User 1 will no longer be selectable because the system now only understands, and expects English speech - instead the option Default setting becomes active.

To improve the system's understanding of the driver's English speech the solution is to teach and store the driver's English speech in User 2 with the system set to English (to have both variants available) or to replace the Swedish language profile in User 1 with an English profile.

02 Get to know your navigation system

Keyboard

02

}} 25

Entering and selecting options

Screen view with text field or optional text.

This navigation system uses a "daisy wheel" to enter specific information, e.g. type of facility, place/town, area/country, address, street or post code.

Activate an option After marking a desired function/menu bar using the thumb wheel or the TUNE knob, press the thumb wheel/OK to see the next level of functions/options.

Enter as follows

The daisy wheel.

1. Mark a text field. 2. Press OK to call up the "daisy wheel":

3. Select the characters using the thumb wheelTUNE knob and enter them by pressing thumb wheelOK.

Numerical keyboard Another way of entering characters is using the centre console's buttons 0-9, * and #.

When 9 is pressed, a bar appears with all characters1 under the buttons, e.g. W, x, y, z and 9. Quick press the move/"loop" cursor through these characters.

Stop using the cursor on the desired character to select it - the character is shown on the enter line.

Delete/change using EXIT.

More options

NOTE

Faded characters cannot be selected in combination with the currently input char- acters.

In the daisy wheel's inset menu there are fur- ther options that have more characters and digits:

More (More) + OK - alternative charac- ters appear in the wheel.

123 + OK - digits appear in the wheel.

=> + OK - the cursor moves to the list on the right-hand side of the screen where selections using OK can be made.

Last 5 (Last 5) + OK - lists the most recent searches. Mark one of them + OK.

1 The character for each button may vary depending on market/state/language.

02 Get to know your navigation system

Keyboard

02

26

List of options

List that matches entered characters.

The digit 5 in the screen's top right-hand cor- ner indicates that the list contains 5 possible options that match the entered letters BEZ.

No list An empty list and the characters *** in the upper right-hand corner's digit window, mean that the available options with current entered characters are more than 1000 - when the amount is less, the current options are shown automatically.

To reduce the number of options in the list:

Enter more characters on the text line.

02 Get to know your navigation system

DVD disc, screen

02

}} 27

DVD contents DVDs with updated map data and related enhanced information are being developed continually. Contact a Volvo dealer for infor- mation on the latest issue.

NOTE

Map data does not have 100 percent cov- erage in all areas/countries.

The system's coverage area is under con- stant construction and updating may sometimes be necessary.

See also www.volvocars.com/navi for further information on maps etc.

Map areas The car's map system varies depending on market. The following main maps are availa- ble:

Australia & New Zealand (Pacific)

Europe

Hong Kong

Japan

China

Middle East

North America

Russia

South Africa

South America

Southeast Asia

Turkey.

Should you need to modify the navigation system's map area - contact a Volvo dealer for information on how to proceed.

Updating the map data When updating, DVDs are used to transfer new information to your car's navigation sys- tem. This is done using the car's regular DVD player.

NOTE

A number of the Infotainment functions are disabled or reduced during updat- ing.

Before an update begins - read through the instructions first.

In the event of any questions about updating - contact a Volvo dealer.

License code To be able to activate an update, a licence code has to be entered first. This code can be found on the Internet.

1. Open the website1 "Activate your naviga- tion system".

2. Enter your car's VIN number and the owner's e-mail address in the relevant entry fields, then click to close the web- site.

3. Note the licence code which is then dis- played on screen. This licence code is also sent to the specified e-mail address.

Updating How to update the navigation system:

1. Start the engine. 2. Insert the first disc in the DVD player and

follow the instructions on screen. An update is often distributed on several discs2 - insert the discs in the logical/ numerical order.

1 The Internet address from which the licence code is generated comes with the update DVDs. 2 The number of discs depends on the market.

02 Get to know your navigation system

DVD disc, screen

02

28

3. The screen shows New software found - start the update by pressing OK. (Cancel by pressing EXIT).

4. The screen shows Please enter licence code: - input the licence code using the numeric keypad, see page 19.

5. Follow the instructions on screen, which continuously show the progress of the update and the approximate time remain- ing.

The update has to be enabled once all DVDs have been loaded. This is done by switching off the engine and waiting 5 minutes before restarting. The update is then complete and the navigation system can be used again.

NOTE

In certain cases updating map data may also add new functions in the system, which are not described in this manual.

Continue an interrupted update If the update is not complete when the engine is switched off, the process continues from where it left off the next time you start the engine. Proceed as follows to restart an inter- rupted update:

If the disc is inserted into the DVD player: Start the engine - the update is resumed automatically. Follow the instructions on screen.

If the disc is removed: Start the engine and insert the disc into the DVD player - the update is resumed automatically. Fol- low the instructions on screen.

Care of DVD discs Handle DVD discs with care.

When they are not in use they must be stored in their packaging. Avoid storing them in damp, high temperature, direct sunlight or dusty surroundings.

Screen care Clean the screen with a soft, lint-free rag, lightly moistened with a mild window cleaning agent.

IMPORTANT

Do not place any objects in front of the GPS navigator's display screen - the sur- face could then be scratched. Mobile phones can also interfere with the display screen's function.

02 Get to know your navigation system

DVD disc, screen

02

29

02 Get to know your navigation system

Maps, road types and compass

02

30

NOTE: The images are schematic - some details may vary depending on software version and market.

02 Get to know your navigation system

Maps, road types and compass

02

31

Map image of current position The appearance of the screen image depends on geographic position and the settings made, e.g. map scale, facilities selected for display etc.

Explanations for the text, signs and symbols that may appear on the display are available on the front of the cover.

POIs along the motorway - see page 42.

Detailed junction map - the left-hand sec- tion of the display screen shows a detailed enlargement of the next junc- tion1. The situation is always supplemen- ted with a voice message, see next sec- tion.

Two maps can be selected as display mode. The screen shows the same map image but in two different scales. 2D or 3D display can also be selected - see page 53.

Scroll mode - see page 32.

Voice guidance After a destination has been entered and the car approaches a junction or exit, a voice message sounds stating distance and type of the next manoeuvre. At the same time a detailed map of the junction is displayed. The voice guidance message is repeated closer to the junction.

The volume can be adjusted with the audio unit's volume button (during ongoing voice message).

To repeat a message:

Press twice on the OK button.

Also see Settings Guidance options Voice guidance - see page 55.

NOTE

There is no voice guidance during a cur- rent call with a Bluetooth-connected mobile phone.

To select male or female voice and language:

Go to the menu system in MY CAR - see the car's manual. The voice volume can also be adjusted there.

Compass The red tip of the compass needle points north and the white end points south.

Go to Settings Map options Compass to select a different view or so that the com- pass is not shown - see page 54.

1 This function can be expanded - see page 56.

02 Get to know your navigation system

Menus

02

32

Menu system All menus and options are presented in the relevant section of the manual.

NOTE

Greyed-out menu bars and options on the screen are temporarily not selectable.

Shortcuts After pressing the NAV button to start the navigation system, the next press on the NAV button will bring up the first menu for the user, with shortcuts to the most frequently used functions.

The shortcuts are:

Enter address see also page 40.

Enter facility see also page 41.

Previous destinations see also page 44.

Traffic info on the route see also page 68.

Cancel guidance deletes the current itinerary. Also located there is the option Pause guidance, see page 33.

To the shortcuts from map mode Press the NAV button.

Main menu

The main menu is located at the top of the navigation system's menu tree.

To the main menu from map mode Press the OK MENU button.

To the main menu from another menu Press NAV and then OK MENU.

or

Press EXIT repeatedly until it is shown.

Back to the Main menu Regardless of where the user is in the menu structure, the Main menu can always be accessed by pressing once or more on the EXIT button.

Back to the map There is an easy way to quickly bring up the map on the screen again, no matter how deep into the menu system the user is:

Hold in EXIT for a few seconds.

Scroll menu

In Scroll mode a crosshair is moved over the map image with the centre console's numeri- cal keys.

02 Get to know your navigation system

Menus

02

33

Activating Scroll mode in normal map mode Press one of the numerical keys 0-9.

Scrolling Press one of the numerical digit keys

1-2-3-4-6-7-8-9 - a directional arrow is shown in the margins combined with the number that will be used to scroll the map in the desired direction.

Zooming out/in Turn the TUNE knob.

Exiting from Scroll mode Press EXIT.

Crosshair Press OK MENU once to show a menu for the point on the map, which the centre of the crosshair points to:

Set single destination - Deletes any previous destinations in the itinerary, and starts guidance on the map.

Add waypoint - Adds the selected point to the itinerary.

POIs nearby - Allows you to search/view available facilities around the selected location.

Read traffic message - Allows you to view traffic messages1 around the selected location.

Information - Shows information availa- ble about the selected location.

Store location - Allows you to store the selected location in the memory. (Opens the menu Set destination Stored location Edit - see page 44).

Pause guidance

Pause guidance

With the cursor on Pause guidance + OK MENU the guidance can be switched off tem- porarily after which neither visual nor acoustic guidance is given - at the same time the

menu-bar changes to Resume guidance. However, the system's car symbol continues to show the car's actual position on the map.

Resuming guidance Select Resume guidance + OK MENU.

1 The service is not available for all areas/markets/states.

02 Get to know your navigation system

Menu tree in three levels

02

34

Shown here are three of the menu tree's lev- els. Several of the menus at level 3 have fur- ther submenus - these are described in more detail in each respective section.

The menus are structured as follows:

Menu level 1

Menu level 2

Menu level 3

Menu level 4

p. x

Menus and functions

Repeat voice guidance page 31

Set destination page 40

Address

Area:

City:

Street:

Number:

Junction:

Set single destination

Add as waypoint

Information

page 40

Point of interest (POI)

By name

Near the car

Along the route

Around point on map

Along the street

Along the motorway

MyPOI near the car

MyPOI around point on map

page 41

Stored location

Set single destination

Add as waypoint

Information

Edit

Sort by

Delete

page 43

Previous destination

Set single destination

Add as waypoint

Information

Store

Delete

Delete all

page 44

Return trip

Start guidance

Add as waypoint

Edit itinerary

page 45

Postcode page 45

02 Get to know your navigation system

Menu tree in three levels

02

}} 35

Latitude & longitude page 46

Select point on map page 46

Route details page 47

Itinerary

Start guidance

Add another waypoint

Edit itinerary

page 47

Avoid page 48

Next destination page 48

Route instructions page 49

Map of entire route page 49

Map of remaining route page 49

Start demo

or

Stop demo

page 60

Traffic informationA page 64

Read traffic message page 66

Traffic events on route

or

Traffic events ahead

page 68

Avoided traffic events page 68

Current position page 50

Settings page 51

Traffic informationA

Traffic message

page 51

Route options

Route type

Route proposals

Customise route

Route learning

Reset route learning

page 51

Map options

Map colours

Show dual map mode

Single map settings

Right map settings

Left map settings

POI on map

Show full-screen map

POI on map

Compass

Show current road name

Show speed limitsB

page 53

02 Get to know your navigation system

Menu tree in three levels

02

36 * Option/accessory, for more information, see Introduction.

Guidance options

Voice guidance

Voice output volume

Street names in voice guidance

Turn-by-turn navigation *

Time of arrival format

Always show intersection map

MyPOI Alert

page 55

System information

GPS information

Map version:

Map loading progress

page 56

Import/edit MyPOI page 57

Reset navigation settings page 58

Delete all user data page 58

Pause guidance

or

Resume guidance

page 33

A Not available in all areas/markets/states. B Not in cars with Road Sign Information (RSI Road Sign

Information).

02 Get to know your navigation system

02

37

38

Specify a destination............................................................................... 40 Itinerary................................................................................................... 47 Current position...................................................................................... 50 Settings................................................................................................... 51 Simulation............................................................................................... 60

PLANNING YOUR TRIP

03 Planning your trip

Specify a destination

03

40

Address

Set destination Address

There are several different ways to program a destination.

It is sufficient to simply specify a district/city and start the journey - it leads to the centre of the district/city.

If a destination's latitude and longitude are known then these can be entered.

See page 25 for information on how charac- ters are written/entered into the system's var- ious text fields.

NOTE

The definition of city or area may vary from country to country and even within the same country. In some cases, it refers to a municipality and in others it refers to a dis- trict.

City or street

The cursor first rests on Street.

How to search and locate a destination:

1. With the previous image view on the dis- play screen - Press OK to activate the preset text box.

2. Enter the street's name Street: with the "daisy wheel" (see page 25) and then select a desired City:.

3. Or City: + OK and start by entering it.

The following search criteria can be used:

Area: - Enter a country.

City: - Enter a district/city.

Postcode: - Under City: the search can also be made using a post code.

Street: - Enter the street address.

Number: - Select one of the street's house numbers.

Junction: - Select a destination based on where the two streets/roads intersect.

Set single destination - Deletes any destinations in the itinerary and starts guidance to the current destination.

Add as waypoint - Select + OK to add the address to the itinerary.

Information - Select + OK to view infor- mation about the selected destination.

03 Planning your trip

Specify a destination

03

}} 41

More about Information

Select an address/street + OK - then the fol- lowing can be selected:

Map - Shows where on the map the loca- tion can be found - sometimes with addi- tional information.

Call1 - Calls the facility if a telephone number is given.

Related POI - Lists the facilities associ- ated with the current/selected facility.

Parking nearby - Lists parking where appropriate around the selected location, with distance.

Facilities

Set destination Point of interest (POI)

The system contains a large number of searchable facilities which can be specified as destinations. The list of desired facilities can be shortened by specifying which facility/ facilities the current search relates to:

Select Type: and specify which facilities should be covered by the search (it is the same approach as described on page 54).

To select which facilities should be perma- nently visible on the map, go to the menu Settings POI on map - see page 54.

All searches are made in the manner descri- bed in the previous section City or street:

1. Specify Area:/City:/Type:/Name:. 2. Then select Set single destination, Add

as waypoint or Information + OK.

With name

By name

In addition to searching with main group, such as Restaurant, the company name of the facility can also be used, e.g. "Peppes Bodega". The procedure is the same as when searching with Address, see page 40.

When searching with Name: with e.g. "Lon- don Airport", all combinations with "London" will be shown when "Lo" is entered. The more letters you input the more specific the reply.

A search with "Lo" also produces reply alter- natives such as "Restaurant Lou Trivalou" for

1 Requires connected mobile phone.

03 Planning your trip

Specify a destination

03

42

example, as alternatives containing several words separated by spaces are also included in the search.

NOTE

There are subcategories of restaurants to simplify searches.

Around the car Near the car

Search of facility refers to the area around the car's current position.

Along the route

Along the route

Search of facility refers to the area along the set itinerary.

Around point on map Around point on map

Search of facility is made with the Scroll func- tion crosshair - see page 32.

The scroll map is shown - place the crosshair at the desired location + OK

Along the street

Along the street

Search of facility refers to the area along a specific street/road.

Along the motorway

Along the motorway

This search lists the facilities easy to reach from the motorway, e.g. service stations along the motorway or at the exits.

NOTE

The car must be on the motorway in ques- tion for the list to be available for presenta- tion.

03 Planning your trip

Specify a destination

03

}} 43

My POI around the car

MyPOI near the car

This function allows facilities that the user has entered into the system - My POI2 - to be searched for in the area around the car's cur- rent position. The search is made within a radius of approx. 32 km.

NOTE

My POI icons are shown on the map from and including scale "1.0 km" and lower.

My POI around point on map

MyPOI around point on map

Facilities that the user has entered into the system - My POI2 - are searched for here around the cursor position on the map. The search is made within a radius of approx. 32 km.

The search is made with the Scroll function's crosshair - see page 32.

The scroll map is shown - position the crosshair on the desired My POI + OK

Stored location

Set destination Stored location

The driver can store a large number of his/her own locations in the system. They can then be used to quickly draw up/supplement an itinerary.

Storing a location To store a chosen location:

1. Use the Scroll function (see page 32) and select the location to be stored.

2. Press OK to display the "crosshair" menu.

3. Select Store location + OK - now the location is stored and is included in the list Stored location.

2 For information about how individual facilities (My POI) can be added to the map database - see page 57.

03 Planning your trip

Specify a destination

03

44

Mark a stored location in the list + OK and choose between the following options/head- ings:

Set single destination Set single destination

This option deletes any previous destinations in the itinerary, and starts guidance on the map.

Add waypoint Add as waypoint

Opens the same window as for Set destination Address Add as waypoint - see page 47.

Information Information

Opens the same window as for Set destination Address Add as waypoint

Information - see page 41.

Edit

Edit

Opens selected "Stored location" and allows you to change/update the following:

Name - Enter a name for the location.

Icon - Select the symbol to represent the current location.

Address - Opens the map to adjust the location's geographical position.

Phone: - Enter a telephone number.

Edit voice tag - Record own sound3. Follow the on-screen instructions.

Show name on map - Untick if the loca- tion name is not to be displayed on the map.

Store - Save changes with OK.

Sort by Sort by

Select whether stored locations are to be sor- ted by:

Name

Icon

Distance

Chronological

Clear Delete

Delete a marked stored location.

Previous destinations

Set destination Previous destination

3 Only in combination with audio system "High Performance" or "Premium".

03 Planning your trip

Specify a destination

03

}} 45

Previously used destinations are stored here. Mark one of them and then select between:

Set single destination

Add as waypoint

Information

Store - see more about this option after the next image.

Delete

Delete all.

The Store option presents this Edit menu.

The Store menu option leads to the same Edit menu as for Stored location Edit.

For more information - see page 43.

To add/change information for the desti- nation - Mark Store + OK.

Return trip Return trip

Goes back to the itinerary starting point. Can be selected anywhere/anytime in the itinerary.

Post code

Set destination Postcode

Search destination by post code:

1. Highlight Postcode: + OK to view the "daisy wheel".

2. Select characters with the TUNE knob and type/enter them by pressing OK. (Or type/enter characters using the centre console's numerical buttons - see page 25).

NOTE

Presentation of post code may differ between different markets/areas.

03 Planning your trip

Specify a destination

03

46

Search via Latitude/Longitude

Set destination Latitude & longitude

Select destination with GPS coordinates:

1. Place the cursor on the character to be changed and press OK - the character window becomes "active".

2. Enter a digit using the centre console's numerical buttons (or turn TUNE) - finish with OK or place the cursor on the next character - previous character window is "deactivated".

3. Move the cursor to the next character location to be changed and repeat.

4. With the cursor in both windows to the far right, (or turn TUNE) the letters for the cardinal points - N = 6, S = 7, W = 9 and E = 3 are entered.

5. When both coordinates are entered - mark Add as waypoint + OK to add the location to the itinerary.

Add to itinerary Add as waypoint

Add the location of the selected coordinates on the map to the itinerary.

Information Information

Shows information available about the loca- tion.

Search via point on map

Set destination Select point on map

Shows maps with current location pointed out by a cursor.

Turn TUNE to change the scale.

1. Move the crosshair using the centre con- sole's numerical keys: [6 MNO] moves to the right, [8 TUV] moves down, etc. - see page 32.

2. When the desired location has been found - Press OK.

03 Planning your trip

Itinerary

03

}} 47

Menu overview

Route details

The system handles one itinerary at a time with a maximum of 8 intermediate destina- tions.

The first specified destination is the journey's Final destination - subsequent input destina- tions are Intermediate destinations.

NOTE

The last added destination will always be Waypoint-1 - the previous Waypoint is raised one step: So "Old" Waypoint-1 will be Waypoint-2, etc.

If a new order is required - Go to Route details Itinerary, Mark a way point and Move in list.

Enter an itinerary

Route details Itinerary

Draw up an itinerary with several stops to avoid entering destination after destination during your trip.

One final destination with up to 8 intermedi- ate destinations can be specified.

Start guidance

Results with "Route proposal 3" ticked.

Cursor on Start guidance + OK activates current itinerary.

If the display of 3 alternative itineraries is pre- set then the driver can select one of them, see the menu Settings Route options Route proposals, page 52.

Add waypoint Adds an intermediate destination. Gives the same menu as in "Set destination" - see page 40.

Edit itinerary Gives the options:

03 Planning your trip

Itinerary

03

48

Clear itinerary - deletes the current itin- erary.

Route options - opens a shortcut to Settings Route options - see page 51.

Intermediate destinations in the itinerary

By selecting intermediate destination + OK each intermediate destination in the itinerary can be updated.

Information - Full name and address, and Latitude and Longitude. In addition, a facility can be Called up and any Facilities around the location and Car parking in the vicinity can be seen.

Delete - deletes the intermediate desti- nation.

Move in list - changes the order in the itinerary.

Adjust on map - shows the location on the map with a crosshair. Another loca- tion there be scrolled forward and selected with OK, see more about the Scroll function on page 32.

Store - opens the menu Set destination Stored location Edit - see page

see page 44).

Avoid

Route details Avoid

A distance in the itinerary can be deselected here. The alternative distances are calculated from the car's current position. The system then selects another route.

Select the desired option + OK.

Next destination

Route details Next destination

Shows the next intermediate destination's position on the map, name, address, estima- ted time of arrival and distance there. Also gives the options:

03 Planning your trip

Itinerary

03

49

Delete - deletes the current intermediate destination and shows the next one.

Map - shows the position on the map in the Scroll menu, see page 32.

>> - scrolls to the next intermediate des- tination in the itinerary, in a loop.

Call - calls up the facility if possible.

Route instructions

Route details Route instructions

The itinerary's waypoints are listed here.

Map of entire route

Route details Map of entire route

The whole itinerary is shown here - scaled down to fit on the display screen.

Otherwise, the same functions as in the Scroll menu, see page 32.

Map of the remaining route

Route details Map of remaining route

Shows screen image similar to the one in the previous section, but here only with the itiner- ary's remaining distance from the car's cur- rent position.

Otherwise, the same functions as in the Scroll menu, see page 32.

03 Planning your trip

Current position

03

50

Where am I?

Current position

Displays a map with the car's current position and information on the location, such as name and coordinates.

03 Planning your trip

Settings

03

}} 51

Traffic information

Settings Traffic information

Further settings that affect traffic information can be made, in addition to those described here - see page 68.

Traffic message

Traffic message

Certain traffic message sorting can be done here:

All - all reported traffic disruptions appear.

Most serious - indicates, for example, closed roads due to accidents or other large/long-term disruption.

None - indication of traffic problem off.

NOTE

This setting does not affect the calculation of a route.

Route options

Settings Route options

Route type

Route type

Three types of route can be selected here:

Fast - major and fast roads such as e.g. motorways are prioritised. In some cases this is neither the shortest travel time nor route.

Short - short route prioritised. In some cases the route uses minor roads.

Easy - minimum number of junctions and similar traffic systems prioritised.

03 Planning your trip

Settings

03

52

Route proposals

Route proposals

At the command Start guidance there may be several similar suitable options. Select this if the driver should be asked in case there are several options to choose from:

Select 1 if the route type shall be selected based on the option under Route type in the previous section.

Select 3 if the driver shall select between the three route types before guidance is started.

See more information on page 47.

Customise route

Customise route

Here you can deselect certain traffic sugges- tions. Tick to avoid the following element1

along the route:

Avoid motorways

Avoid toll roads

Avoid ferries

Avoid congestion charging zones

Avoid tunnels

Avoid time-restricted roads

Avoid season-restricted roads

Avoid car trains

Avoid unverified roads

Avoid borders

NOTE

If an itinerary is entered when these selections are made then there may be a certain delay after an option has been ticked/unticked since the itiner- ary must be recalculated.

If tunnels, toll roads and motorways are not selected then these are avoi- ded as far as possible and are only used if no other reasonable alternative is available.

Route learning Route learning

The basic condition is a stored itinerary. If the driver deviates from the proposed route and takes a different route to the final destination than the system recommends, the system memorises the driver's choice.

If the same itinerary is used again 2 times and the driver repeats the route choice, the sys- tem will instead show the path that the driver selected.

Ticked window means that a route that is driven 3 times is stored as route instead of the original route.

1 Available options vary depending on market/area/state.

03 Planning your trip

Settings

03

}} 53

Reset route learning Reset route learning

Erase driving history.

Map options

Settings Map options

Map colours Map colours

Choose between:

Automatic - a light sensor detects whether it is day or night.

Day (in previous image)

Night

Single map settings Single map settings

Map orientation - Select Heading or North.

North - the map always shows North at the top of the screen. The car symbol moves in the relevant direction on the screen.

Heading - the car symbol is in the centre and always points up on the screen. The map image rotates under the car symbol in relation to how the road bends.

Map view - Select 2D or 3D.

2D - car symbol and map image seen at right angles straight from above.

3D2 - car symbol and map image seen obli- quely from the side/above.

Show dual map mode

Show dual map mode

The screen can display the map of the entire image area or the same map view in 2 differ- ent scales on each left and right half.

Select by ticking in the box by Show dual map mode + OK and EXIT.

2 Only if Map orientation>Heading is selected.

03 Planning your trip

Settings

03

54

Adjust the map scale in dual map mode To view both maps with different map scales, they can be adjusted individually as follows:

1. Start from map view mode. Turn the TUNE knob to the left and right - one screen half is surrounded by a colour frame.

2. Press OK - selected screen half is now "active".

3. Turn the TUNE knob to adjust the scale.

4. Press OK again - done, the screen half is "deactivated".

Left map settings Left map settings

Map orientation - Select Heading or North.

Map view - Select 2D or 3D.

Right map settings Right map settings

Same as for left map - see previous section.

Show full-screen map Cursor on Show full-screen map + OK ticks the function that shows the map image across the whole of the display screen. This removes the information fields in the bottom and top of the screen with information on e.g. passenger compartment temperature.

Facility on map

POI on map

Tick the desired option for how many facilities are to be shown on the map:

All - all facilities appear.

None - no facilities appear.

Selected - A menu with all facilities appears: Tick the facilities that you want to appear on the map.

NOTE

If a POI category with many symbols on the map is deselected/switched off, more POIs from other categories can be shown/ viewed on the screen.

Possible facilities are listed on page 72.

Compass Compass

Select the type of compass you want to appear on the map image:

Graphic

Text - compass direction (upwards on the display screen) is indicated by a let- ter, e.g. N for "North".

None.

See more information about the compass on page 31.

Show current road name Cursor on Show current road name + OK ticks the function that shows the name of the street/road where car is located in the lower edge of the display screen.

Show speed limits

03 Planning your trip

Settings

03

}} 55

Cursor on Show speed limits + OK ticks the function that shows a traffic sign with the cur- rent speed limit in the top right-hand corner of the display screen.

Cars with Road Sign Information - RSI

In cars with the function for identifying road signs (Road Sign Information) the current speed limit is only shown on the combined instrument panel - the option to select the display of the speed limit on the map image is not available in these cars.

See the normal owner's manual for the car for more information on RSI.

Guiding options

Settings Guidance options

Voice guidance Voice guidance

If you want voice guidance - tick option Voice guidance. See more information on page 31.

Voice output volume Voice output volume

The option shows a volume control on the screen that can be used to adjust the Voice guidance volume.

Adjust using the TUNE knob + OK.

See more information on page 17.

Street names in voice guidance3

Cursor on Street names in voice guidance + OK ticks the function that enables voice guidance information about distance and direction to be complemented with spoken names of streets and roads.

3 Certain markets and languages.

03 Planning your trip

Settings

03

56

Navigation with Turn-by-turn

Cursor on Turn-by-turn navigation + OK ticks the function which means that the next manoeuvre in the itinerary, as well as the dis- tance to it, is shown in the combined instru- ment panel.

Time of arrival format Time of arrival format

Select the time to appear on the screen:

ETA - shows the estimated arrival time

RTA - shows the remaining time until arrival.

Show junction map in other program The navigation system can work in the back- ground while at the same time the display

screen shows a different program source, e.g. Radio or Phone.

Cursor on Always show intersection map + OK ticks the function that also shows detailed junction maps on half of the display screen when other sources/programs are in use - see page 31.

Alarm for My POI Cursor on MyPOI Alert + OK ticks the func- tion that enables a preset warning sound to alert when the car approaches a My POI posi- tion - see page 57.

System information

Settings System information

GPS information

GPS information

The screen shows:

Number of received satellites:

Received position

Map-matched position

Altitude:

The geographic name of the current posi- tion.

03 Planning your trip

Settings

03

}} 57

Map version

Map version:

The screen shows:

Software version:

Map version:

Map market:.

Map download status Map loading progress

When updating the map database, the pro- gress of the update is shown here. See more information on page 27.

Import/Edit My POI

Settings Import/edit MyPOI

Many companies offer POI files on their Inter- net pages. Using this function the user can supplement Volvo's map database with facili- ties from other suppliers.

NOTE

Adding POI files to the map database requires a certain amount of computer knowledge!

File format for POI files and how the files are downloaded from the Internet are determined by the respective man- ufacturer/distributor. Consequently there is no standardised process for downloading the POI files from the Internet - and for this reason this owner's manual does not show an exact step-by-step description.

If you have any questions - contact a Volvo dealer.

In order to show the principle for how to download a POI file from the Internet, a sim- ple example follows here with the fictitious company "Department Store" and its stores:

1. Go to the company's page on the Internet and search for the location with its POI file.

2. Select a POI file with the "gpx" format and download it to the computer - if the format is not available then the POI file must be converted to the gpx format4

after downloading.

4 There are freeware conversion programs available for download from the Internet.

03 Planning your trip

Settings

03

58

3. Load the POI file "Department Store.gpx" onto a USB memory stick.

4. Then insert the USB memory stick into the car's USB port (under the tunnel con- sole's armrest/hatch) and locate Settings

Import/edit MyPOI in the menu sys- tem.

5. Select Import + OK and follow the onscreen instructions.

When the import is complete, some settings can be made for the new My POI group "Department Store":

the name can be changed

the map image My POI icon can be replaced (if an icon is included in the imported POI file it automatically becomes the default)

one of 3 sounds can be selected (to get a warning when the car approaches the My POI icon - see page 56)

choose whether or not the My POI icon is to be shown on the map.

When all selections have been made, select Store + OK to finish, or a new POI group can be imported/edited.

All facilities added are grouped under the heading "My POI".

NOTE

The type of information permissible for inclusion on the map is stipulated in national legislation. For current informa- tion, see www.volvocars.com/navi.

The map database can be complemented with 100 My POI groups or 50 000 My POI locations in GPX 1.1 format.

NOTE

In addition to all the variants of POI files that can be downloaded from the Internet, Volvo can offer supplementary files for cer- tain markets - contact your local Volvo dealer for information on any possible options.

Reset navigation settings

Settings Reset navigation settings

This function resets the system to default set- tings.

The menu option Settings Reset navigation settings + OK gives a screen image with the question Reset all navigation settings?, Continue with OK Cancel with EXIT - press OK to reset the settings to default settings or undo with EXIT.

Erase all user information

Settings Delete all user data

The menu option Settings Delete all user data+ OK gives a screen image with the question Do you want to delete all navigation user data?, Continue with OK

03 Planning your trip

Settings

03

59

Cancel with EXIT - press OK to delete or undo with EXIT.

The following settings are deleted with OK:

all stored locations

history for Last 5

previous destinations

route learning

imported My POI data

changed default settings.

03 Planning your trip

Simulation

03

60

Start demo

Route details Start demo

The journey specified in the itinerary is simu- lated here.

The system shows how the journey to the itinerary's specified destination will be carried out.

To exit the demo run:

The previous menu option Start demo has switched to Stop demo - Select + OK.

NOTE

A destination must be entered in order for the demo to work.

03 Planning your trip

03

61

G 0 0 0 0 0 0

62

General.................................................................................................... 64 Reading information................................................................................ 66 Handling traffic problems........................................................................ 68

TRAFFIC INFORMATION

04 Traffic information

General

04

64

Display and reception Transmitted traffic information is always received and presented - even if no destina- tions are given.

How traffic information should be presented can be set and changed in Settings, see page 51.

The presentation of traffic information also depends on how it is transmitted.

NOTE

Traffic information is not available in all areas/countries.

The traffic information transmission areas are constantly being expanded.

Traffic symbols on the map

Symbol for traffic message/problems.

When there is at least one traffic message along the itinerary route, a TMC symbol1

appears in the map's upper left-hand corner.

The scroll function (see page 32) can be used to scroll through the traffic problem to see its precise position and nature.

Point on map Traffic problems are marked with arrows, lines and frames:

Traffic with disruption

Traffic with disruptions in both directions

Extent

Marking's colour Colour of arrows, lines and frames indicates the degree of the disruption:

Black Closed road

Red Stationary traffic

Orange Slow traffic

Yellow General information

Type of traffic disruption Shown here are examples of map symbols2

that can mark different disruptions in the traf- fic:

1 Traffic Message Channel 2 Map symbols may vary between different markets/states.

04 Traffic information

General

04

65

Accident

Contraflow

Diversion

Information

Narrow road

Parking information

Congestion

Roadwork

Slippery road

Other hazard

Closed road

Extent

Certain traffic messages also contain infor- mation on the extent of the traffic obstruction.

On all scales up to 5 km - except the traffic message symbol, a line the same colour as the direction arrow is shown along the affec- ted route. The length of the line is corre- sponds to the extent (distance) of the traffic problem.

Size of area for traffic information The scale of the map determines how great a quantity of traffic information can be shown - the larger the map area shown on the screen, the more information can be displayed.

04 Traffic information

Reading information

04

66

Message

Examples of, with arrows, selected traffic prob- lems and their extent.

When the crosshair is placed over a traffic problem (indicated by an arrow along the road) you'll see a flashing

frame with a traffic disruption symbol (e.g. slippery road) on the map.

To take advantage of the symbol's traffic information:

Press OK and select Traffic information + OK.

Traffic information

Main menu.

Traffic information

Read traffic message

Read traffic message

With the cursor on Read traffic message + OK the following view is shown:

1. Scroll the crosshair to the traffic incident (coloured line/arrow parallel to the affec- ted road section) about which information is required - a road sign with frame starts to flash out on the map.

2. Press OK - Following which, information like this is shown:

Detailed information on the traffic problem is linked to the symbol, and to the extent that

04 Traffic information

Reading information

04

67

information is available the following is also displayed:

duration

restrictions on speed, vehicle width and height

roads affected.

If there are several traffic problems in the crosshair frame, then the problem closest to the centre of the crosshair is shown first after a pressing OK once.

The upper section of the display screen can show e.g. "2/5" which means that the current information is number 2 of a total of 5 mes- sages in the crosshair - the remaining mes- sages can be scrolled to using short presses on OK.

Return to map display with EXIT.

04 Traffic information

Handling traffic problems

04

68

To avoid traffic problems

Traffic problems ahead

Menu bar 2 without itinerary added.

Traffic events ahead

Press OK on Traffic events ahead to list the current traffic problems.

Traffic problems along the route

Menu bar 2 with itinerary added.

Traffic events on route

This is the same menu bar as in the previous section, but with an activated itinerary - the menu bar now instead reads Traffic events on route. Here the system can be made to guide past the traffic disruption using a differ- ent route.

Press OK on the selected menu bar to list the traffic problems along the route:

List with 1 disruption on the itinerary's route.

The driver can avoid traffic problems by allowing the system to determine a different route. Proceed as follows:

1. Select/highlight the traffic obstacle to be avoided + OK - the traffic problem is ticked.

2. If several obstacles need to be avoided - tick these too. A maximum of 15 can be selected.

3. Then select Calculate new route + OK.

The system then calculates a route that leads past the ticked traffic disruptions.

To obtain detailed information about a listed traffic problem:

Select/highlight a traffic problem + # INFO - information about the traffic problem is shown.

Avoided traffic problems

Avoided traffic events

Ticked traffic problems from the previous section are listed here.

04 Traffic information

Handling traffic problems

04

69

List with 1 editable traffic problem.

The following can be performed:

Clear all - unticks all traffic problems.

Select/highlight one of the traffic prob- lems + OK - the traffic problem is unticked.

Select/highlight one of the traffic prob- lems + # INFO - detailed information with map image is shown on the display screen, see example on next page:

Detailed information - return to the menu using EXIT.

Return to map display with EXIT or select Calculate new route + OK - the itinerary is adjusted with regard to the changes made.

70

Facilities.................................................................................................. 72

SYMBOLS ON THE MAP

05 Symbols on the map

Facilities

05

72

Specify which facilities are to be shown on the map or select All or None are to be shown - see page 54.

Pre-ticked facilities are shown on the map.

Settings Map options POI on map Selected

Proceed as follows:

Select/mark facility with the TUNE knob - tick/untick using OK and close with EXIT.

To avoid making the map image difficult to read, the number of facilities that can be viewed simultaneously on the screen is lim- ited - zooming into an area provides an opportunity to view several facilities.

NOTE

The symbol for a facility and the num- ber of facilities may vary between dif- ferent countries.

New symbols may appear and others disappear in conjunction with updating the map data - one can scroll through all the POI symbols for the relevant map system under Settings in the menu system.

Shown here are examples of symbols for dif- ferent facilities - they are grouped here according to their function in society:

Petrol station

Petrol station with CNG (biogas)

Petrol station with LPG

Car wash

Car workshop

Car hire

Motorsport facility

Volvo dealer

Parking

Parking garage

Parking, large vehicles

Tourist information

Historical monument

Tourist attraction

Ice skating

Sport facility

Exercise facility

Ski facility

Cinema

Amusement park

05 Symbols on the map

Facilities

05

73

Animal park

Opera

Theatre

Bar

Nightclub

Restaurant

Restaurant

Restaurant, Chinese

Restaurant, seafood

Fastfood

Coffee shop

Shopping Centre

Dry cleaners

Kiosk

Hairdresser

Rest area

Camp site

Hotel

Conference facility

Exhibition grounds

Train station

Commuter railway station

Airport

Bus station

Ferry

Marina

Marina

Civic building

Authority

University

University

City centre

City centre

Police station

Fire station

Library

Hospital

Pharmacy

Bank

ATM

Post office

Kindergatan

School

74

Frequently asked questions.................................................................... 76 EULA - License agreement..................................................................... 78 Copyright................................................................................................ 80

QUESTIONS AND ANSWERS

06 Questions and answers

Frequently asked questions

06

76

The position of the car on the map is wrong The Navigation system shows the position of the car to an accuracy of about 20 metres.

There is a greater chance of error when driv- ing on roads lying parallel to another road, on winding roads, on roads on several levels and after driving a long distance without making any distinctive turns.

High mountains, buildings, tunnels, viaducts, over/underpasses etc. also have a negative affect on the reception of GPS signals, which means that accuracy in calculating the posi- tion of the car may decrease.

The system does not always calculate the fastest/shortest route When calculating a route outline, distance, width of road, type of road, number of right or left turns, roundabouts etc. are all taken into account in order to produce the best theoreti- cal route. A more efficient selection of route may be possible based on experience and knowledge of the area.

The system uses toll roads, motorways and ferries even though I chose to avoid them For technical reasons, the system can only use major roads when calculating a route out- line extending over a long distance.

If you selected to avoid toll roads and motor- ways, then they are avoided to the greatest possible extent and are only used if there is no other reasonable alternative available.

The position of the car on the map is incorrect after transportation If the car is transported, for example by ferry or train, or in such a way as to impede the reception of GPS signals, it can take up to 5 minutes before the position of the car is correctly calculated.

The position of the car on the map is incorrect after the car battery has been disconnected If power has been cut from the GPS antenna, it can take more than 5 minutes for the GPS signals to be received correctly and the posi- tion of the car to be calculated.

The car symbol on screen behaves errati- cally after a tyre change

In addition to the GPS receiver, the car's speed sensor and a gyro assist in calculating the current position and direction of travel of the car. After fitting the spare wheel or chang- ing between summer and winter tyres the system needs to "learn" the size of the new wheels.

In order for the system to work optimally it is recommended to turn the steering wheel to

full lock a few times while driving, in a suita- ble location.

The map image does not correspond with the real situation Factors such as the constant expansion and rebuilding of the road network, new traffic regulations constantly being introduced etc. mean that the map database is not always complete.

Continuous development and updating of map data is underway - a Volvo dealer can provide more information.

See also www.volvocars.com/navi for further information on maps etc.

The scale of the map sometimes changes There is no detailed map information in cer- tain areas. The system then automatically changes the degree of magnification.

The expected menu option is missing Check the settings that have been made. Select Reset navigation settings to restore the original settings.

If this does not help, select Delete all user data.

06 Questions and answers

Frequently asked questions

06

77

The car symbol on screen jumps forwards or spins The system may need a few seconds to sense the position and movement of the car before driving off.

Switch off both the system and the engine. Start again, but remain stationary for a while before starting to drive.

I shall go on a long trip but do not want specify a particular route outline to the cities I plan to travel through - How do I most simply create an itinerary? Specify the destination directly on the map using the hairline cross. The system automat- ically guides you to the final destination even though you are driving beside the intermedi- ate destinations.

My map information is not up-to-date Contact your nearest Volvo Dealer regarding the updating of map data.

See also www.volvocars.com/navi

How can I easily check which map version is used? See Settings System information Map version: for information on version and geo- graphic area covered.

06 Questions and answers

EULA - License agreement

06

78

Notice to the user PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE NAVTEQ DATABASE.

THIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT FOR SALE BETWEEN YOU AND NAVTEQ EUROPE B.V. FOR YOUR COPY OF THE NAVTEQ NAVIGABLE MAP DATABASE, INCLUDING ASSOCIATED COMPUTER SOFTWARE, MEDIA AND EXPLANATORY PRINTED DOCUMENTATION PUBLISHED BY NAVTEQ (JOINTLY "THE DATABASE"). BY USING THE DATABASE, YOU ACCEPT AND AGREE TO ALL TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT ("AGREEMENT"). IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE DATABASE, ALONG WITH ALL OTHER ACCOMPANYING ITEMS, TO YOUR SUP- PLIER FOR A REFUND.

OWNERSHIP The Database and the copyrights and intel- lectual property or neighbouring rights therein are owned by NAVTEQ or its licensors. Own- ership of the media on which the Database is contained is retained by NAVTEQ and/or your supplier until after you have paid in full any amounts due to NAVTEQ and/or your supplier pursuant to this Agreement or similar agree-

ment(s) under which goods are provided to you.

LICENSE GRANT NAVTEQ grants you a non-exclusive license to use the Database for your personal use or, if applicable, for use in your business' internal operations. This license does not include the right to grant sub-licenses.

LIMITATIONS ON USE The Database is restricted for use in the spe- cific system for which it was created. Except to the extent explicitly permitted by manda- tory laws (e.g. national laws based on the European Software Directive (91/250) and the Database Directive (96/9)), you may not extract or reutilise substantial parts of the contents of the Database nor reproduce, copy, modify, adapt, translate, disassemble, decompile, reverse engineer any portion of the Database. If you wish to obtain interoper- ability information as meant in (the national laws based on) the European Software Direc- tive, you shall grant NAVTEQ reasonable opportunity to provide said information on reasonable terms, including costs, to be determined by NAVTEQ.

TRANSFER OF LICENSE You may not transfer the Database to third parties, except when installed in the system for which it was created or when you do not

retain any copy of the Database, and provi- ded that the transferee agrees to all terms and conditions of this Agreement and con- firms this in writing to NAVTEQ. Multi-disc sets may only be transferred or sold as a complete set as provided by NAVTEQ and not as subset thereof.

LIMITED WARRANTY NAVTEQ warrants that, subject to the warn- ings set out below, for a period of 12 months after acquisition of your copy of the Data- base, it will perform substantially in accord- ance with NAVTEQ's Criteria for Accuracy and Completeness existing on the date you acquired the Database; these criteria are available from NAVTEQ at your request. If the Database does not perform in accordance with this limited warranty, NAVTEQ will use reasonable efforts to repair or replace your non-conforming copy of the Database. If these efforts do not lead to performance of the Database in accordance with the warran- ties set out herein, you will have the option to either receive a reasonable refund of the price you paid for the Database or to rescind this Agreement. This shall be NAVTEQ's entire lia- bility and your sole remedy against NAVTEQ. Except as expressly provided in this section, NAVTEQ does not warrant nor make any rep- resentations regarding the use of results of the use of the Database in terms of its cor-

06 Questions and answers

EULA - License agreement

06

79

rectness, accuracy, reliability, or otherwise. NAVTEQ does not warrant that the Database is or will be error free. No oral or written infor- mation or advice provided by NAVTEQ, your supplier or any other person shall create a warranty or in any way increase the scope of the limited warranty described above. The limited warranty set forth in this Agreement does not affect or prejudice any statutory legal rights that you may have under the legal warranty against hidden defects.

If you did not acquire the Database from NAVTEQ directly, you may have statutory rights against the person from whom you have acquired the Database in addition to the rights granted by NAVTEQ hereunder accord- ing to the law of your jurisdiction. The above warranty of NAVTEQ shall not affect such statutory rights and you may assert such rights in addition to the warranty rights gran- ted herein.

LIMITATION OF LIABILITY The price of the Database does not include any consideration for assumption of risk of consequential, indirect or unlimited direct damages which may arise in connection with your use of the Database. Accordingly, in no event shall NAVTEQ be liable for any conse- quential or indirect damages, including with- out limitation, loss of revenue, data, or use,

incurred by you or any third party arising out of your use of the Database, whether in an action in contract or tort or based on a war- ranty, even if NAVTEQ has been advised of the possibility of such damages. In any event NAVTEQ's liability for direct damages is lim- ited to the price of your copy of the Database.

THE LIMITED WARRANTY AND LIMITATION OF LIABILITY, SET FORTH IN THIS AGREE- MENT, DO NOT AFFECT OR PREJUDICE YOUR STATUTORY RIGHTS WHERE YOU HAVE ACQUIRED THE DATABASE OTHER- WISE THAN IN THE COURSE OF A BUSI- NESS.

WARNINGS The Database may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results. The Database does not include or reflect information on - inter alia - neighbourhood safety; law enforcement; emergency assistance; construction work; road or lane closures; vehicle or speed restrictions; road slope or grade; bridge height, weight or other limits; road or traffic conditions; special events; traffic congestion; or travel time.

GOVERNING LAW This Agreement shall be governed by the laws of the jurisdiction, in which you reside at the date of acquisition of the Database. Should you at that moment reside outside the European Union or Switzerland, the law of the jurisdiction within the European Union or Switzerland where you acquired the Database shall apply. In all other cases, or if the juris- diction where you acquired the Database cannot be defined, the laws of the Nether- lands shall apply. The courts competent at your place of residence at the time you acquired the Database shall have jurisdiction over any dispute arising out of, or relating to this Agreement, without prejudice to NAV- TEQ's right to bring claims at your then cur- rent place of residence.

06 Questions and answers

Copyright

06

80

Austria Bundesamt fr Eich- und Vermessungswe- sen.

France Source Goroute IGN France & BD Carto IGN France.

Germany Die Grundlagendaten wurden mit Genehmi- gung der zustndigen Behrden entnommen.

Great Britain Based upon Crown Copyright material.

Greece Copyright Geomatics Ltd.

Hungary Copyright Top-Map Ltd.

Italy La Banca Dati Italiana stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana.

Norway Copyright Norwegian Mapping Authority.

Poland EuroGeographics.

Portugal Source: IgeoE - Portugal.

Spain Informacin geogrfica propiedad del CNIG.

Sweden Based upon electronic data National Land Survey Sweden.

Switzerland Topografische Grundlage: Bundesamt fr Landestopographie.

NOTE

Australia is not covered by this agreement; see special information.

2005 - 2014 NAVTEQ All rights reserved.

Denso Hereby, DENSO CORPORATION declares that this DN-NS-020 is in compliance with the essential require-

ments and other relevant provisions of Direc- tive 1999/5/EC.

06 Questions and answers

06

81

07 Alphabetical Index

07

82

A

About information on the map disc................. 57

Acoustic signal Stored location..................................... 44

Additional information................................ 20

Address enter...................................................... 40

Aerial location................................................. 17

Arrow keys................................................. 20

Audible signal stored location...................................... 44

Automatic notification................................ 51

Avoid ferries.................................................... 52 motorways............................................ 52 toll roads............................................... 52

Avoid stretch of road................................. 48

B

Back to starting point................................ 45

Basic functions.......................................... 19

Basic settings............................................ 14

Battery remote control...................................... 20

Brackets with English text......................... 12

C

Change scale for traffic information.......... 65

Changes in the manual.............................. 13

Compass................................................... 31

Component positioning, overview............. 16

Crosshair................................................... 32

Current position on map............................ 50

D

Delete itinerary........................................... 48

Demo......................................................... 60

Destination set......................................................... 40

Distance unit ETA....................................................... 56 RTA....................................................... 56

DVD disc care....................................................... 28 changing............................................... 27

E

English text in brackets............................. 12

Enter an itinerary........................................ 47

Erase user information............................... 58

ETA, distance unit...................................... 56

F

Facilities Symbols................................................ 72

Facilities as destination............................. 41

Factory settings......................................... 14

Functions keypad and remote control.................. 20

07 Alphabetical Index

07

83

G

GPS information........................................ 56

GPS receiver.............................................. 17

Guidance................................................... 47 quick guide............................................. 8

Guiding options......................................... 51

I

IR receiver and remote control.................. 20

J

Junction..................................................... 40

K

Keypad....................................................... 20 location........................................... 17, 18

L

Licence code............................................. 27

Loudspeaker location................................................. 18

M

Main unit location................................................. 17

Map point on................................................. 46

Map areas.................................................. 27

Map colour................................................. 53

Map image................................................. 30

Map mode................................................. 14

Map options............................................... 53

Map scroll.................................................. 32

Map version............................................... 57

Map view................................................... 53

Menus/functions........................................ 34

My POI........................................... 43, 56, 57

N

Next destination in itinerary....................... 48

O

On/Off........................................................ 14

Overview component location................... 16

P

Pause route guidance................................ 33

POIs on the map........................................ 54

Post code search................................................... 45

Propagation............................................... 65

R

Read traffic message........................... 51, 66

Reset navigation settings.......................... 58

Return to default settings.......................... 58

Return trip.................................................. 45

07 Alphabetical Index

07

84

Road sign information............................... 55

Route options...................................... 52, 55

RSI - Road Sign Information...................... 55

RTA, distance unit..................................... 56

S

Save a location.......................................... 43

Saved destinations.................................... 44

Scale change............................................ 46, 65

Scrolling..................................................... 32

Search post code.............................................. 45 via point on map................................... 46

Search paths described in the manual...... 12

Set destination........................................... 40

Simulation.................................................. 60

Start guidance........................................... 47

Store a location.......................................... 43

Stored location Acoustic signal..................................... 44 add information.................................... 44

Stored locations......................................... 43

Symbols facilities................................................. 72

System activation........................................ 8

System options.......................................... 56

System settings......................................... 14

T

TMC receiver............................................. 17

Traffic information................................ 17, 51 broadcast.............................................. 64

Traffic information selection...................... 51

Traffic symbols on the map....................... 64

Transport of car......................................... 76

TV screen care....................................................... 28

V

Voice commands (Voice control)............... 22

Voice control.............................................. 22

Voice guidance.......................................... 31

Volume control of voice messages............ 17

W

Waypoint.................................................... 48

Manualsnet FAQs

If you want to find out how the XC60 Volvo works, you can view and download the Volvo XC60 Road and Traffic Information 2014 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Volvo XC60 as well as other Volvo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Volvo XC60. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Volvo XC60 Road and Traffic Information 2014 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Volvo XC60 Road and Traffic Information 2014 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Volvo XC60 Road and Traffic Information 2014 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Volvo XC60 Road and Traffic Information 2014 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Volvo XC60 Road and Traffic Information 2014 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.