Volvo S40 2005 Owners Manual PDF
en
Summary of Content for Volvo S40 2005 Owners Manual PDF
2005
S40 VOLVO
2 0
0 5
6968TP
O W
N E
R 'S
M A
N U
A L
V O
LV O
S 4
0
7459 (English). AT 0446. Printed in Sweden, Elanders Infologistics Vst AB, Mlnlycke 2004
T P
7 4
5 9 WEB EDITION
N
Int
De We r the safety and comfort of you and your pas isfy all current safety and environmental req
In o equipment, instructions and maintenance info
Tha
roduction
ar Volvo owner hope you will enjoy many years of driving pleasure in your Volvo. The car has been designed fo
sengers. Volvo is one of the safest cars in the world. Your Volvo has also been designed to sat uirements.
rder to increase your enjoyment of the car, we recommend that you familiarise yourself with the rmation contained in this owners manual.
nk you for choosing Volvo!
O
Introduction
Ow A g is t you tun tion fere all t the ma
The ma tion des and
NO req
"W ris in
Im "I da in
ners Manual ood way of getting to know your new car o read the owners manual, ideally before r first journey. This will give you the oppor- ity to familiarise yourself with new func- s, to see how best to handle the car in dif- nt situations, and to make the best use of he cars features. Please pay attention to safety instructions contained in the
nual:
equipment described in the owners nual is not present in all models. In addi-
to standard equipment, this manual also cribes options (factory fitted equipment) certain accessories (extra equipment).
TE! Volvo cars are adapted for the varying uirements of different markets, as well as
for national or local legal requirements and regulations.
The specifications, design features and illus- trations in this owners manual are not bind- ing. We reserve the right to make modifica- tions without prior notice.
Volvo Car Corporation
WARNING! arning!" texts indicate where there is a
k of personal injury in the event of the structions not being followed.
portant! mportant!" texts indicate a risk of mage to the car in the event of the
structions not being followed.
P
Volvo Cars and the environment
Vo
Ou Qu the act with ard clea the mu ISO ing Vol me ena ron and info
l of carbon monoxide in the incoming air closes the air intakes to prevent the level e cabin from becoming too high - for
mple in heavy city traffic, tailbacks and els - while the carbon filter traps nitrogen es, ground-level ozone and hydrocar- s. In addition, to benefit allergy sufferers, fabrics used in the interior comply with
provisions of the international ko-Tex2
dard. Outside, a special catalytic coating
wn as PremAir3 is used to convert harm- round-level ozone in the air passing ugh the radiator into pure oxygen.
. An international ecological standard for textiles
. Applies only to five-cylinder engines PremAir is a registered trademark of Engelhard Corporation
lvo Cars and the environment
r environmental philosophy ality, Safety and Environmental care are three core values which guide all the
ivities of Volvo Cars. Volvo cars comply strict international environmental stand-
s and are manufactured in some of the nest and most resource-efficient plants in world. Volvo Cars has been awarded
lti-site global certification under the 14001 environmental standard, ensur-
continuous improvement in the area. All vo models are supplied with an environ- ntal product declaration - or EPD - which bles the customer to compare the envi- mental performance of different models engines. Visit epd.volvocars.se for more
rmation.
Clean inside and out Your Volvo is designed to be clean inside and out, a concept which means that you benefit in two ways - from a clean cabin and a highly efficient exhaust treatment system, which ensures that your car saves fuel and releases a minimum of harmful substances. Inside, the air entering the passenger com- partment is filtered to protect you and your passengers from dust, particles and pollen. A sophisticated air quality system known as
IAQS1 can be added as an option to ensure that the air supplied to the passenger com- partment is cleaner than the air outside. Con- sisting of an electronic sensor and an acti- vated carbon filter, the system monitors the
leve and in th exa tunn oxid bon the
the stan
kno ful g thro
1. Interior Air Quality System
2
3
Q
Volvo Cars and the environment
Vo
A V me sum car Vol res
Vo en Reg aut diti ute tec and bes
Re We con trib onl and ma the
The for
Always dispose of envi- ronmentally hazardous waste, such as batter- ies and oils, in an envi- ronmentally safe man- ner. If uncertain, ask your authorised Volvo workshop for advice. Service your car regularly.
hese hints will help you to reduce your fuel onsumption without increasing your travel me or lessening the enjoyment of driving. part from being kind to your car, you'll be aving money - and the Earth's resources.
lvo Cars and the environment
olvo meets strict international environ- ntal demands and delivers low fuel con- ption to reduce emissions of greenhouse
bon dioxide. In terms of fuel economy, vo cars are highly competitive in their pective segments.
lvo workshops and the vironment ular maintenance carried out by an
horised Volvo workshop creates the con- ons for low fuel consumption and contrib- s to a cleaner environment. Volvo service hnicians are equipped with the knowhow tools to ensure that your car delivers the t possible environmental performance.
ducing environmental impact believe that our customers share our cern for the environment. You can con- ute to improving the environment by using y ecologically approved car care products,
by ensuring that your car is serviced and intained according to the instructions in owner's manual.
following hints will help you to do your bit the environment:
Always ensure that your tyre pressures are correct. Poorly inflated tyres increase fuel consumption.
Since roof racks and ski boxes increase air resistance, leading to significantly higher fuel consumption, they should be removed immediately after use.
Remove unnecessary items from the car - the greater the load the higher the fuel consumption.
Is your car equipped with an engine block heater? If so, use it for a few hours before starting from cold to reduce fuel con- sumption and exhaust emissions.
Drive gently! Avoid accelerating and brak- ing too hard.
Drive in the highest pos- sible gear - lower engine revs reduce fuel con- sumption.
Ease back on the accel- erator on downhill gradi- ents.
Use engine braking. Take your foot off the accelerator and change down.
Avoid idling. Switch off the engine in traf- fic queues.
T c ti A s
R
Contents
7 13 37
65 77 87
99 131 149
155 179 207
Instrument overview Safety Instruments and controls
Climate control Interior Locks and alarm
Starting and driving Wheels and tyres Car care
Maintenance and service Infotainment system Technical data
S
T
Instrument overview Overview, left-hand drive car 8 Overview, right-hand drive car 10 Drivers door control panel 12
U
Instrument overview
Ov
Lef
erview, left-hand drive car
t-hand drive
V
Instrument overview
1. 2. 3. 4.
5. 6. 7. 8. 9. 10. 11. 12. 13.
14. 15. 16. 17. 18.
19. 20. 21. 22. 23.
24.
Steering wheel adjustment Bonnet release Control panel Direction indicators, main beam, trip computer Lighting, fuel filler flap opener Door handle, central locking Air vents in dashboard Air vent for side window Cruise control Horn, airbag Combined instrument panel Keypad for infotainment system Windscreen wipers and washers, headlamp washers Ignition switch Interior rearview mirror Seatbelt reminder Interior lighting for left-hand side Deactivation of alarm detectors, deadlocks Switch for interior lighting Position of accessory switch Interior lighting for right-hand side Sunroof controls Display for climate control and infotainment system Infotainment system
25. Controls for climate control, infotainment system and personal preferences
26. Climate control 27. Gear lever 28. Hazard warning flashers 29. Door handle 30. Glovebox 31. Parking brake 32. Electrical socket/cigarette lighter 33. STC or DSTC stability system 34. Switch, optional equipment
NM
Instrument overview
Ov
Rig
erview, right-hand drive car
ht-hand drive
NN
Instrument overview
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
13. 14.
15. 16. 17.
18. 19. 20. 21. 22. 23. 24.
Switch for retrofitted accessory STC or DSTC stability system Electrical socket, cigarette lighter Parking brake Control panel Glovebox Door handle Air vent for side window Air vents in dashboard Gear lever Climate control Controls for climate control, infotainment system and personal preferences Infotainment system Display for climate control and infotainment system Sunroof controls Interior lighting for left-hand side Deactivation of alarm detectors, deadlocks Switch for interior lighting Switch for retrofitted accessory Interior lighting for right-hand side Seatbelt reminder Interior rearview mirror Ignition switch Windscreen wipers and washers, headlamp washers
25. Cruise control 26. Combined instrument panel 27. Horn, airbag 28. Keypad for infotainment system 29. Hazard warning flashers 30. Door handle, central locking 31. Lighting, fuel filler flap opener 32. Direction indicators, main beam, trip
computer 33. Bonnet release 34. Steering wheel adjustment
NO
Instrument overview
Dr
1.
2. 3. 4. 5.
ivers door control panel
Blocking switch for rear power windows (standard) Electric child locks (option) Power windows Door mirror, left-hand side Door mirrors, setting Door mirror, right-hand side
NP
Safety Seatbelts 14 Airbags (SRS) 17 Activating/deactivating the airbag (SRS) 20
Side airbags (SIPS) 22 Inflatable Curtain (IC) 24 WHIPS 25
When are the safety systems activated? 27 Crash mode 28 Inspecting the airbags and inflatable curtains 29
Child safety 30
NQ
Safety
Se
Ten pos
Alw He que tha Oth thro sea
Put
WARNING! The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this may diminish the protection provided by the airbag in the event of a collision.
WARNING! Each belt is intended for one person only.
WARNING! If the belt has been subjected to a major load, such as in a collision, the entire belt must be replaced. This includes the reel, mountings, bolts and buckles. Some of the protective characteristics of the belt may have been lost, even if it appears to be undamaged. Replace the seatbelt if the belt is worn or damaged. The new seatbelt must be type-approved and intended for installation in the same position as the replaced belt. Never modify or repair the seatbelts yourself. Contact an authorised Volvo workshop.
atbelts
sioning the hip strap. The belt must be itioned low down.
ays use a seatbelt avy braking can have serious conse- nces if the seatbelts are not used. Ensure
t all passengers use their seatbelts. erwise, rear seat passengers may be wn forward against the backs of the front ts in a collision.
ting on a seatbelt:
Pull the belt out slowly and secure it by pressing the buckle into the lock. A loud "click" indicates that the belt has locked.
Releasing the belt:
Press the red lock button and let the belt retract. If the belt does not retract fully, feed the belt in by hand so that it does not hang lose.
The belt locks and cannot be withdrawn:
if it is pulled out too quickly. during braking and acceleration. if the car leans heavily. It is important that the belt lies against the body so it can provide maximum protection. Do not lean the backrest too far back. The seatbelt is designed to protect in a normal seating position.
Keep the following in mind:
do not use clips or anything else that can prevent the belt from fitting properly.
ensure the belt is not be twisted or caught on anything.
the hip strap must be positioned low down (not over the abdomen).
tension the hip strap over the lap by pulling the diagonal shoulder belt as illustrated.
NR
Safety
Se A s the sea ligh If th gui
Fro The fron sea fron add
Seatbelts and pregnancy It is extremely important that the seatbelt is used correctly during pregnancy. It should be in contact with the body. The upper part of the seatbelt should fit between the breasts and against the side of the abdomen. The hip section of the seatbelt must be flat and as far under the abdomen as possible. It must not slide up towards the abdomen.
An expectant mother who is driving should move the seat as far back as possible in order to obtain the greatest possible distance between the steering wheel and the abdomen. Set the steering wheel as far forward as a comfortable driving position permits.1
atbelt reminder1
ymbol lights up in the roof console (above rearview mirror) as a reminder that the tbelts are not buckled up. A symbol also ts up on the combined instrument panel. e car is stationary, the reminder is extin-
shed after approximately six seconds.
nt seat symbols remain lit as long as the driver or t seat passenger do not have their tbelts on. (If a child seat is place on the t seat, the reminder does not come on.) In ition to the two symbols, an audible
reminder is heard that changes frequency with the speed of the car.
Rear seat The seatbelt reminder has two sub-functions:
Notifies of the number of seatbelts being used via a message on the information display. This function is automatically activated as soon as a rear door is opened and closed, even if no one is actually sitting in the rear seat. The message is automatically erased approx. 10 seconds after the car is driven away, or can be acknowledged manually by pressing the READ button.
Warns that someone in the rear seat has removed their seatbelt while the car is moving. A message appears on the infor- mation display and an audible warning sounds. The warning ceases once the belt has been put back on, or can be acknowledged manually by pressing the READ button.
The message on the display that states how many seatbelts are in use can be viewed at any time. To read saved messages, press the READ button.
. Function can depend on market
NS
Safety
Se
Lab
atbelts
el on seatbelts with seatbelt tensioner
Seatbelt tensioner All the seatbelts (except the centre rear belt) are equipped with belt tensioners. A mechanism in the belt tensioner tightens the belt around the body in the event of a suffi- ciently violent collision. This provides more effective restraint for passengers.
NT
Safety
Ai
Air sid The Res sup sea the ma
Th se th by
WARNING! To minimise the risk of injury if the airbag deploys, passengers must sit as upright as possible with their feet on the floor and backs against the backrest. Seatbelts must be secured.
WARNING! Never place a child in a child seat or on a booster cushion in the front seat if the
airbag (SRS) is activated.1
Never allow a child to stand or sit in front of the front passenger seat. No one shorter than 140 cm (4 ft 7) should sit in the front passenger seat if the airbag (SRS) is activated. Failure to follow the advice given above can endanger the life of the child.
1. For information on activated/deactivated airbag (SRS), see page 20.
rbags (SRS)
bag (SRS) on the drivers e car has an SRS airbag (Supplemental traint System) in the steering wheel to plement the protection afforded by the tbelt. This airbag is fitted into the centre of steering wheel. The steering wheel is
rked SRS AIRBAG.
Passenger airbag (SRS) The passenger airbag1 is fitted behind a panel above the glovebox. This panel is marked SRS AIRBAG.
WARNING! e seatbelts and airbags interact. If a atbelt is not used or is used incorrectly, is may diminish the protection provided the airbag in the event of a collision. 1. Not all cars have a passenger airbag
(SRS). This can be unselected when the car is ordered.
NU
Safety
Ai
Loc driv
As well as the warning symbol, a message appears on the information display. If the warning symbol malfunctions, the warning triangle comes on and the message SRS AIRBAG SERVICE URGENT appears on the display.
Contact an authorised Volvo workshop immediately.
O po A th N th gl
WARNING! If the warning symbol for the AIRBAG system remains on or comes on while driving, it means that the AIRBAG system is not functioning fully. The symbol can indicate a fault in the seatbelt buckle, SIPS, SRS or IC system. Contact an authorised Volvo workshop immediately.
rbags (SRS)
ation of the passenger airbag in left-hand e and right-hand drive cars.
Warning symbol on the combined instrument panel The AIRBAG system is monitored continu- ously by the cars electronic control system. The warning symbol on the combined instrument panel lights when the ignition key is turned to position I, II or III. The symbol goes out after about six seconds if the AIRBAG system is working correctly.
WARNING! bjects and accessories must not be sitioned or glued on or near the SRS
IRBAG panel (above the glovebox) or in e area affected by a deployed airbag. ever interfere with SRS components in e steering wheel or the panel above the ovebox.
NV
Safety
SR
SR The sur cien ign with airb occ com incl occ
Airbags (SRS) NOTE! The airbags have a function whereby their capacities are adapted to the collision force to which the vehicle is subjected.
WARNING! Work on the SRS system can cause malfunction and result in serious personal injury. Repairs must only be performed by an authorised Volvo workshop.
S system, left-hand drive
S system SRS system consists of a gas generator
rounded by an inflatable airbag. A suffi- tly violent collision trips sensors and
ites the gas generator, inflating the airbag hot gas. To cushion the impact, the
ag deflates when compressed. When this urs, smoke escapes into the car. This is pletely normal. The entire process,
uding inflation and deflation of the airbag, urs within tenths of a second.
SRS system, right-hand drive NOTE! The sensors react differently depending on the course of the collision and whether the seatbelts on the driver and passenger side are used. It is therefore possible that only one (or none) of the airbags may inflate in a collision. The SRS system senses the force of the collision on the car and adapts accordingly so that one or more airbags is deployed.
OM
Safety
Ac
Ind (SR
PA The sea a c
Ind A te tha vate
WARNING! Activated airbag (passenger seat): Never place a child in a child seat or on a booster cushion in the front passenger seat. This also applies to persons shorter than 140 cm (4 ft 7). Deactivated airbag (passenger seat): Persons taller than 140 cm (4 ft 7) must never sit in the passenger seat. Failure to follow the advice given above can endanger life.
WARNING! If the car is equipped with a front passenger airbag (SRS), but does not have PACOS, the airbag will always be activated.
tivating/deactivating the airbag (SRS)
icator showing that the passenger airbag S) is deactivated.
COS (option) airbag (SRS) for the front passenger
t can be deactivated. This is necessary if hild seat is to be placed there.
icator xt message on the roof panel indicates
t the passenger airbag (SRS) is deacti- d.
PACOS (Passenger Airbag Cut-Off Switch) Activating/deactivating The switch is located on the passenger end of the dashboard and is accessible when the passenger door is open. Check that the switch is in the required position. Volvo recommends that that the ignition key is used to change position. (Other items with a shape similar to a key can be used.)
ON
Safety
Sw
Sw ON swi 140 sea boo
WARNING! Do not allow anyone to sit in the front passenger seat if the text message in the roof panel indicates that the airbag (SRS) is deactivated and the airbag warning symbol is displayed in the combined instrument panel. This indicates that there has been a severe malfunction. Contact an authorised Volvo workshop as soon as possible.
itch for SRS in ON position.
itch position = Airbag (SRS) activated. With the
tch in this position, persons taller than cm (4 ft 7) can sit in the front passenger
t, but never children in a child seat or on a ster cushion.
Switch for SRS in OFF position. OFF = Airbag (SRS) is deactivated. With the switch in this position, children in a child seat or on a booster cushion can sit in the front passenger seat, but never persons taller than 140 cm (4 ft 7).
OO
Safety
Si
Sid
Sid A la tran bea the fron and SIP The airb bac
Child seats and side airbags The side airbag does not diminish the protection provided by the car to children seated in a child seat or on a booster cushion.
A child seat or booster cushion can be placed on the front passenger seat provided
that the car does not have an activated1
passenger airbag.
Side airbags are a supplement to the SIPS system. Always wear a seatbelt.
WARNING! Work on the SIPS bag system can cause malfunction and result in serious personal injury. Always contact an authorised Volvo workshop. Do not put objects in the area between the outside of the seat and the door panel, since this area is required by the side airbag.
1. For information on activated/deacti- vated airbag (SRS), see page 20.
de airbags (SIPS)
e airbag locations.
e airbags SIPS bags rge proportion of the collision force is sferred by the SIPS to the floor, roof, ms, pillars, and other structural parts of body. The side airbags on the driver and t passenger seats protect the chest area are an important part of the SIPS. The
S bag system consists of two main parts: side airbags and the sensors. The side ags are located in the front seat krests.
WARNING! Use only Volvo genuine car seat covers, or seat covers approved by Volvo. Other seat covers may impede the operation of the side air bags.
WARNING! Side airbags are a supplement to the SIPS system. Always wear a seatbelt.
OP
Safety
Lef
SI The gen cie ign airb occ cus The the
t-hand drive
PS bag system SIPS bag system consists of a gas erator, side airbag and sensors. A suffi-
ntly violent collision trips the sensors and ites the gas generator, inflating the side ag. The airbag inflates between the upant and the door panel and thereby hions the initial impact while deflating. side airbag is only normally deployed on side of the collision.
Right-hand drive
OQ
Safety
Inf
Pr The SIP alo bot infla col Wh infla pre stri dur
WARNING! Never hang or fasten anything on the roof handles. The hook is only intended for light outer garments (not for hard objects such as umbrellas). Do not screw or fit anything to the headlining, door pillars or side panels. This could compromise the intended protection. Only use Volvo genuine parts that are approved for placement in these areas.
latable Curtain (IC)
operties inflatable curtain is a supplement to the
S system. It is concealed in the headlining ng both sides of the roof and protects h front and rear seat passengers. The table curtain is activated by the SIPS
lision sensors if the car is hit from the side. en deployed, the inflatable curtain tes. The inflatable curtain helps to
vent the driver and passengers from king their heads on the inside of the car ing a collision.
WARNING! The inflatable curtain is a supplement to the seatbelts. Always use a seatbelt.
OR
Safety
W
Pr inj The con spe fron end the veh
WHIPS system and child seats/ booster cushions The WHIPS system does not diminish the protection provided by the car to children seated in a child seat or on a booster cushion.
Correct seating position For the best possible protection, the driver and front seat passenger should sit in the
Th se
WARNING! Never modify or repair the seat or WHIPS system yourself. Contact an authorised Volvo workshop.
HIPS
otection against whiplash ury WHIPS whiplash protection system (WHIPS)
sists of energy absorbing backrests and cially designed head restraints for the t seats. The system is actuated by a rear- collision, where the angle and speed of collision, and the nature of the colliding icle all have an influence.
Properties of the seat When the WHIPS system is deployed, the front seat backrests fall backward to alter the position of the driver and front seat passenger. This diminishes the risk of whiplash injury.
WARNING! e WHIPS system is a supplement to the atbelts. Always wear your seatbelt.
OS
Safety
W
cen pos res
You
1
If fo W au P pr ev un w ev
WARNING! If a rear seat backrest is folded down, the corresponding front seat must be moved forward so that it does not touch the folded backrest.
HIPS
tre of the seat with as little space as sible between the head and the head
traint.
may place:
a child seat or booster cushion on the front passenger seat, provided the
passenger airbag is not activated1. a rear-facing child seat in the rear seat that uses the back of the front seat as support.
Do not obstruct the WHIPS system
. For information on activated/deacti- vated airbag (SRS), see page 20.
WARNING! a seat has been subjected to extreme rces, such as due to a rear collision, the HIPS system must be checked by an thorised Volvo workshop.
art of the WHIPS systems otective capacity may have been lost en if the seats appear to be damaged. Contact an authorised Volvo
orkshop to have the system checked en after a minor rear-end collision.
WARNING! Do not squeeze rigid objects between the rear seat cushion and the front seat backrest. Make sure you do not to obstruct the function of the WHIPS system.
OT
Safety
W
If th follo
red
S t. A
S
In
W
1 ith the cars other safety systems providing
WARNING! Never drive with deployed airbags. They can make steering difficult. Other safety systems may also be damaged. The smoke and dust created when the airbags are deployed can cause skin and eye irritation after intensive exposure. In case of irritation, wash with cold water. The rapid deployment sequence and airbag fabric may cause friction and skin burns.
hen are the safety systems activated?
e airbags have been deployed, the wing is recommended:
Have the car transported to an authorised Volvo workshop. Do not drive with deployed airbags. Let an authorised Volvo workshop replace components in the cars safety system. Always contact a doctor.
NOTE! The SRS, SIPS, IC and belt tensioner systems are deployed only once during a collision.
System Trigge
eatbelt tensioner In a frontal collision and/or side-impact acciden irbags (SRS) In a frontal collision.1
ide airbags (SIPS) In a side-impact accident.1
flatable curtains In a side-impact accident.1
hiplash protection WHIPS In a rear-end collision.
. Airbags do not always deploy during a collision. The particular impact may not require the function, w occupants adequate protection.
WARNING! The AIRBAG control unit is located in the centre console. If the centre console is drenched with water or other liquid, disconnect the battery cables. Do not attempt to start the car since the airbags may deploy. Have the car transported to an authorised Volvo workshop.
OU
Safety
Cr
Dr If th CR app me CR enf dam fue sys
is still shown in the display then the car must not be driven or towed. Even if the car appears to be driveable, hidden damage may make the car impossible to control once moving.
Moving the car If NORMAL MODE is shown after CRASH MODE has been reset, the car can be moved carefully out of a dangerous position. Do not move the car further than necessary.
WARNING! If the car is in CRASH MODE it must not be towed. It must be transported to an authorised Volvo workshop.
ash mode
iving after a collision e car is involved in a collision, the text ASH MODE SEE MANUAL may ear on the information display. This
ans that the car has reduced functionality. ASH MODE is a protective state that is orced when the collision may have aged the cars vital functions, such as the
l lines, sensors for one of the safety tems, or the brake system.
Attempting to start the car First, check that no fuel is leaking from the car. There should be no smell of fuel.
If everything seems normal and you have checked for indications of fuel leakage, you may attempt to start the car.
Firstly, remove the ignition key and then reinsert it. The cars electronics will now try to reset themselves to normal mode. Then try to start the car. If CRASH MODE
WARNING! Never attempt to repair your car or reset the electronics yourself if the car has been in CRASH MODE. This could result in personal injury or the car not functioning as normal. Always allow an authorised Volvo workshop to check and restore the car to normal status after CRASH MODE has been displayed.
WARNING! Never, under any circumstances, attempt to restart the car if it smells of fuel when the CRASH MODE message is indicated. Leave the car at once.
OV
Safety
Ins
Ins The dat an a if n ten que an
1. Driver airbag 2. Front passenger airbag 3. Side airbag on the drivers side 4. Side airbag on the passenger side 5. Inflatable curtain on the drivers side 6. Inflatable curtain on the passenger side
pecting the airbags and inflatable curtains
pection intervals decal on the door pillar(s) shows the
es (year, month) when you should contact uthorised Volvo workshop to inspect and,
ecessary, replace the airbags, belt sioners and inflatable curtains. If you have stions concerning the systems, contact
authorised Volvo workshop.
This decal is located in the rear left door opening.
PM
Safety
Ch
Ch an The cho hei pag
Ch cor chil
Vol des equ poi pos
Child seats and airbags are not compatible
Child seats and airbags Always place a child in the rear seat if the passenger airbag is activated2. A child in a child seat on the front passenger seat may suffer serious injury if the airbag deploys.
2. For information on activated/deacti- vated airbag (SRS), see page 20.
WARNING! Persons shorter than 140 cm (4 ft 7) may only sit in the front passenger seat if the passenger airbag is deactivated.
ild safety
ildren should sit comfortably d safely position of a child in the car and the
ice of equipment is dictated by the childs ght and weight, for more information, see e 32.
ildren of all ages and sizes must always sit rectly secured in the car. Never allow a d to sit on the knee of a passenger.
vos own child safety equipment is igned for your car. Use Volvo genuine ipment to best ensure that the mounting
nts and attachments are correctly itioned and are sufficiently strong.
NOTE! Regulations regarding the placement of children in cars vary from country to country. Check what laws apply.
You may place:
a child seat or booster cushion on the front passenger seat, provided the passenger airbag is not activated1.
a rear-facing child seat in the rear seat that uses the back of the front seat as support.
1. For information on activated/deacti- vated airbag (SRS), see page 20.
PN
Safety
Dec
N bo ai fo th
1
als on the end of the dashboard Decal located on the cars sun visor
WARNING! ever place a child in a child seat or on a oster cushion in the front seat if the
rbag (SRS) is activated1. Failure to llow this advice can endanger the life of e child.
. For information on activated/deacti- vated airbag (SRS), see page 20.
PO
Safety
Ch
Pla
Centre rear seat
< (
ed with traps.
135
Rear-facing child seat, secured with seatbelt, support legs and straps.
L2: Type approval no. E5 03135
9 (
ed with traps.
135
Rear-facing child seat, secured with seatbelt, support legs and straps.
L2: Type approval no. E5 03135
1 ( out
139
168
Booster cushion with or without backrest.
L2: Type approval no. E5 03139
1 2 -specific, limited, semi-universal or universal.
ild safety
cement of children in the car
Weight/age Front seat1 Outer rear seat
10 kg 09 months)
Rear-facing child seat, secured with seatbelt and straps. Use a protective cushion between the child seat and the dashboard.
L2: Type approval no. E5 03135
Rear-facing child seat, secur seatbelt, support legs and s
L2: Type approval no. E5 03
18 kg 936 months)
Rear-facing child seat, secured with seatbelt and straps. Use a protective cushion between the child seat and the dashboard.
L2: Type approval no. E5 03135
Rear-facing child seat, secur seatbelt, support legs and s
L2: Type approval no. E5 03
536 kg 312 years)
Booster cushion with or without backrest.
L2: Type approval no. E5 03139
Alternatives: Booster cushion with or with backrest.
L2: Type approval no. E5 03 Integrated booster cushion.
L2: Type approval no. E5 03
. For information on activating/deactivating the airbag (SRS), see page 20.
. L: Suitable for certain child seats as listed in the specified type approval. Child seats can be vehicle
PP
Safety
Integrated booster cushion (option) Volvos integrated booster cushion for the outer rear seats is specially designed to provide optimum safety for children. Combined with the regular seatbelts, the booster cushion is approved for children weighing between 15 and 36 kg.
N bo ai N sh ai Fa ca
1
ISOFIX fixture system for child seats (option) The outer rear seats have ISOFIX attachment points. Contact a Volvo dealer for further information on child safety equipment.
WARNING! ever place a child in a child seat or on a oster cushion in the front seat if the
rbag (SRS) is activated. o one shorter than 140 cm (4 ft 7) ould sit in the front passenger seat if the
rbag (SRS) is activated.1
ilure to follow the advice given above n endanger the life of the child.
. For information on activating/deactivating the airbag (SRS), see page 20.
PQ
Safety
Ch
Ra
Lowering Pull the handle (1). Lower the seat and press until it locks (2). NOTE! Remember to stow away the booster cushion before lowering the rear seat backrest.
Th po
ild safety
ising the booster cushion Pull that handle to raise the booster cushion (1). Grasp the cushion with both hands and push it backwards (2). Push until it locks in place (3).
Check that:
the seatbelt is in contact with the childs body and is not slack or twisted, and that the belt is positioned correctly across the shoulder.
the hip strap is low across the hips for optimum protection.
the belt does not touch the childs throat or lie below the shoulder.
Carefully adjust the position of the head restraint to suit the child.
WARNING! e booster cushion must be in the locked sition before the child is placed there.
WARNING! If an integrated booster cushion has been subjected to a major load, such as in conjunction with a collision, the entire booster cushion must be replaced. This includes the seatbelt, complete with bolts. Even if the booster cushion appears to be undamaged, it may not afford the same level of protection. The booster cushion must also be replaced if it is heavily worn.
PR
Safety
Re It is cus rep an a or a
Fit Vol des
Wh on inst
1
placing the booster cushion important that the integrated booster hion is properly secured. Therefore, leave lacement and any repair of the cushion to uthorised Volvo workshop. Do not modify dapt the booster cushion in any way.
ting a child seat vo has child safety products that are igned for and tested by Volvo.
en using other products that are available the market, it is important to read the fitting ructions included with the product.
Do not attach the straps for the child seat to the horizontal adjustment bar, springs, rails or beams under the seat. Sharp edges can damage the straps. Allow the back of the child seat to rest against the dashboard. This applies to cars without a passenger airbag, or where the airbag is deactivated. Never place the child seat in the front seat if the car is equipped with an
activated1 front passenger airbag. If problems arise when fitting child safety products, contact the manufacturer for clearer instructions.
. For information on activated/deacti- vated airbag (SRS), see page 20.
PS
Safety
PT
Instruments and controls Combined instrument panel 38 Indicator and warning symbols 39 Information display 43
Electrical socket and switches on centre console 44 Lighting panel 45 Left-hand stalk switch 47
Right-hand stalk switch 49 Cruise control (option) 51 Steering wheel keypad (option) 52
Steering wheel adjustment, hazard warning flashers 53 Parking brake, electrical socket 54 Power windows 55
Rearview and door mirrors 58 Power sunroof (option) 61 Personal preferences 63
PU
Instruments and controls
Co
1. 2. 3. 4.
5. 6.
3. Knob for clock Turn the knob to adjust the time
4. Temperature gauge Displays the temperature of the engine cooling system. A message will appear on the display if the temperature becomes too high and the gauge goes into the red zone. Bear in mind that extra lights placed in front of the air intake, for example, reduce the cooling capacity at high outside temperatures and high engine loads
5. Indicator and warning symbols
mbined instrument panel
Speedometer Direction indicators, left Warning symbol Information display The display presents information and warning messages, outside temperature and the time. When the ambient temperature is between +2 C and 5 C, a snowflake symbol appears on the display. This warns of icy roads. The outside temper- ature gauge may show a slightly high reading after the car has been stationary Information symbol Direction indicator, right
7. Tachometer Indicates engine speed in thousands of revolutions per minute (rpm)
8. Indicator and warning symbols 9. Fuel gauge 10. Button for trip meter Used to measure
short distances. Press the button to switch between trip meters T1 and T2. Press and hold (more than 2 seconds) to zero the active trip meter
11. Display Display for automatic gear position, rain sensor, odometer, trip meter and cruise control
12. Main beam indicator
1
1
1
PV
Instruments and controls
Ind
Ind All wh bef sym sta the wh
ma spe
Read the information on the information display. Rectify the fault as instructed or contact an authorised Volvo workshop.
When one of the cars systems does not behave as intended, the yellow information symbol lights up and a text appears on the display. The message text is
leared using the READ button, see page 43, r disappears automatically after 2 minutes.
he yellow information symbol can also ome on in conjunction with other symbols.
OTE! When the message text "TIME OR REGULAR SERVICE" is shown, the ymbol lamp and message text are cleared sing the READ button, or disappear utomatically after 2 minutes.
icator and warning symbols
icator and warning symbols indicator and warning symbols light up en the ignition key is turned to position II ore starting. This is to check that the bols/lights are working. When the engine
rts, all the symbols should go out except handbrake symbol, which extinguishes
en the handbrake is released.
If the engine does not start within five seconds, all symbols extinguish except the symbols for a fault in the cars emissions system and for low oil pressure. Certain symbols
y have no function, depending on the cars cifications.
Symbols in the centre of the instrument panel
The red warning symbol lights up when a fault has been indicated which could affect the safety and/or driveability of the
car. At the same time an explanatory text is shown in the information display. Symbol and message text are visible until the fault has been rectified.
The warning symbol can also light up in conjunction with other symbols.
Stop in a safe place. Do not drive the car further.
c o
T c
N F s u a
QM
Instruments and controls
Ind
Ind sid Fau
AB
dicator symbols right-hand ide dicator symbol for trailer
This symbol flashes when the direction indicators are used and a trailer is coupled. If the symbol does not flash, one of the lamps
n the trailer or the car is defective.
arking brake applied This symbol is lit even if the parking brake is only applied one notch. Check that the lever is properly applied.
icator and warning symbols
icator symbols left-hand e lt in cars emissions system
Drive to an authorised Volvo workshop to have the system checked.
S fault If this symbol lights, the system is not working. The cars regular brake system continues to work, but without the ABS function.
Stop the car in a safe place and turn off the engine. Restart the engine.
Drive to an authorised Volvo workshop to have the ABS checked if the symbol remains lit.
Rear fog lamp This symbol is lit when the rear fog lamp is on.
STC or DSTC stability system A flashing symbol indicates that the stability system is operating.
Engine preheater (diesel) This symbol is lit during engine preheating. Preheating occurs when the temperature is below -2 C. The car can be started
once the symbol extinguishes.
Low level in fuel tank This symbol lights when there are approximately 8 litres of usable fuel left in a petrol-engined car, or 7 litres in a diesel-engined car.
In s In
o
P
QN
Instruments and controls
Air
sys wo
Low
leve up aut
Se
Alt
Fau
WARNING! If the BRAKE and ABS symbols are lit at the same time, there is a risk that the rear end will skid during heavy braking.
bags SRS If this symbol remains on or comes on while driving, it means a fault has been detected in the seatbelt buckle, SRS, SIPS, or IC
tem. Drive directly to an authorised Volvo rkshop to have the system checked.
oil pressure If this symbol lights up while driving, the engine oil pressure is too low. Stop the engine immedi- ately and check the engine oil
l, top up if necessary. If the symbol lights and the oil level is normal, contact an horised Volvo workshop.
atbelt reminder This symbol lights if someone in a front seat has not put on their seatbelt or if someone in a rear seat has taken off their seatbelt.
ernator not charging If this symbol lights while driving, a fault has occurred in the electrical system. Contact an authorised Volvo workshop.
lt in brake system If this symbol lights, the brake fluid level may be too low.
Stop the car in a safe place and check the level in the brake fluid reservoir, see page 162. If the level in the reservoir is below MIN, the car should not be driven any further. Transport the car to an authorised Volvo workshop to have the brake system checked.
If the BRAKE and ABS symbols come on at the same time, there may be a fault in the brake force distribution system.
Stop the car in a safe place and turn off the engine.
Restart the engine. If both symbols extinguish, continue
driving. If the symbols remain on, check the level
in the brake fluid reservoir. See page 162. If the brake fluid level is normal but the
symbols are still lit, the car can be driven, with great care, to an authorised Volvo workshop to have the brake system checked.
If the level in the reservoir is below MIN, the car should not be driven any further. Have the car transported to an authorised Volvo workshop to have the brake system checked.
QO
Instruments and controls
Ind
Re If o is n rem
Low
DO LEF BO DO saf
Hig
par
Bo
1
icator and warning symbols
minder doors not closed ne of the doors, the bonnet1 or the boot lid ot properly closed, the driver will be inded of this.
speed If the car is travelling at more than 7 km/h, the information symbol will light and one of the following texts will be shown on the display: DRIVER
OR OPEN,PASSENGER DOOR OPEN, T REAR DOOR OPEN, NNET OPEN, or RIGHT REAR OR OPEN. Stop the car as soon as it is e to do so and close the door that is open.
h speed If the car is travelling at more than 7 km/h, the warning symbol will light and one of the texts from the previous
agraph will appear on the display.
ot lid reminder If the boot lid is open, this infor- mation symbol will come on and TAILGATE OPEN will appear on the display.
. Only cars with alarms.
QP
Instruments and controls
Inf
M
S mage. S mage. S S S T , number of months since last service and
ormation display
Messages When a warning or indicator symbol come, a message appears on the information display.
Press the READ button (A). Switch between messages with the READ button. Fault messages are stored in the memory until the fault is rectified.
NOTE! If a warning message appears while you are using the trip computer, the message must be read (press READ) before the previous activity can be resumed.
essage Specification
TOP SAFELY Stop and switch off the engine. Serious risk of da TOP ENGINE Stop and switch off the engine. Serious risk of da ERVICE URGENT Leave the car for servicing immediately. EE MANUAL Read the owners manual. ERVICE REQUIRED Have your car serviced as soon as possible. IME FOR REGULAR SERVICE Time for service. The interval depends on distance
engine running time.
Instruments and controls
El
Ele equ
12 The acc and For key
Cig Act The
A th
ectrical socket and switches on centre console
ctrical socket, DSTC system, extra ipment
V electrical socket electrical socket can be used for 12 V
essories, such as mobile phone chargers coolers. The maximum current is 10 A. the socket to supply current, the ignition must be in at least position I.
arette lighter (option) ivate the lighter by pushing in the button. button pops out when the lighter is hot.
Pull out the lighter and light a cigarette on the heated coils.
Stability system, STC or DSTC1
The stability control system comes on automatically when the car is started.
To suppress the stability control system:
Press and hold the button for at least half a second.
For further information, see page 113.
Extra equipment Space for an extra switch for retrofitted equipment.
WARNING! lways leave the plug in the socket when e socket is not in use.
1. Option on certain markets
WARNING! Suppressing the stability control system alters the driving characteristics of the car.
QR
Instruments and controls
Lig
1. Thi hea so the
Car aut
2. pa
Instrument lighting nual adjustment: Brighter illumination - move the control upwards. Dimmer illumination - move the control downwards. tomatic control: improve readability and save electricity, a light sensor automatically adjusts the ghtness of the instrument lighting.
improve the clarity of the centre console play, the background colour switches tween dark and light to suit lighting condi- s.
Front fog lamps (option) ition key in position II: ss the button. The front fog lamps light ng with the position/parking lamps and in/dipped beam. The LED in the button is hile the front fog lamps are on.
TE! In some countries, it is prohibited to dipped beam or main beam at the same
e as front fog lamps.
Fuel filler flap ss the button to open the fuel filler flap.
hting panel
Headlamp levelling s control adjusts the height of the dlamp beam. This is used when the car is heavily laden that it affects the height of beams.
Normal bean height - move the control upward (0). Lowered beam height - move the control downward. s with Bi-Xenon headlamps (option) have omatic headlamp levelling.
Headlamps and position/ rking lamps
All lighting off.
Cars with daytime running lights (certain countries) Dipped beam comes on automatically when the ignition key is switched to the driving position (II) and cannot be switched off. Before trips to countries where automatic dip beam is unsuitable, the daytime running lights can be deactivated. Contact an authorised Volvo workshop. Front and rear position/ parking lamps, number plate lighting and instrument lighting are lit at the same time as dipped beam.
Position/parking lamps Front and rear position/parking lamps, number plate lighting and instrument lighting. See also page 47.
Main and dipped beam Ignition key in position II:
Headlamps (plus front and rear position/parking lamps, number plate lighting and instrument
lighting) are lit.
NOTE! The light switch must be turned to this position to switch on the main beam. However, it is possible to flash the main beam in all positions, even when the ignition key is removed. See also page 47.
3. Ma
Au To twi bri
To dis be tion
4. Ign Pre alo ma lit w
NO use tim
5. Pre
QS
Instruments and controls
Lig
6. Ign Pre lam fron LED com fog swi goe aga
Da Rem wh On rea
NO rea
hting panel
Rear fog lamp ition key in position II: ss the button to switch on the rear fog p. The rear fog lamp lights along with the t fog lamps or main/dipped beam. The in the button and the symbol in the
bined instrument panel light. If the front lamps and the main or dipped beam are tched off and on again, the rear fog lamp s out. Press the button to switch it on in.
zzling ember to switch off the rear fog lamp
en you see a car in the rearview mirror. ly the last car in a queue should have the r fog lamp switched on.
TE! Regulations for the use of front and r fog lamps vary from country to country.
QT
Instruments and controls
Le
Dir an Re Wh the The res
No The the mo wh dire
rip computer ontrols o scroll through trip computer information, rn the thumbwheel (B) in steps, either
pward or downward. Continue turning to turn to the starting point.
OTE! If a warning message interrupts while ou are using the trip computer, this message ust be acknowledged. Acknowledge by ressing the READ button (A) and revert to e trip computer function.
unctions he trip computer displays the following formation:
AVERAGE SPEED
ft-hand stalk switch
ection indicators, light switch d main beam flash sistance point position (1) en changing lanes or overtaking, move lever until you feel a distinct resistance. lever returns when released. This action
ults in three flashes.
rmal turns (2) direction indicators light when you move lever in the direction the steering wheel
ves during a turn. When the steering eel returns to centre after a turn, the ction indicators switch off automatically.
Main beam flash (3) Pull the lever towards you (until you feel a slight resistance). The main beam remains lit until you release the lever.
Switching between main and dipped beam (3) Pull the lever towards you past the "flash position" and release it to change between main and dipped beam.
Home safe lighting (3) When leaving the car in the dark or in a dimly lit area:
Remove the key from the ignition switch. Pull the stalk switch towards you. Exit the car. Lock the doors. The dipped-beam lighting, position/parking lights, number plate lighting and door mirror lamps (option) will come on. These lamps will remain lit for 30, 60 or 90 seconds. You can adjust the delay from the car settings menu on the centre console display. See page 64.
T C T tu u re
N y m p th
F T in
QU
Instruments and controls
Le
Ave Wh ave bas driv
Sp Cu
Cu Pre sec upd car dis
Ave The res con swi res
NO rea
1
ft-hand stalk switch
SPEED IN MILES PER HOUR1
CURRENT FUEL CONSUMPTION AVERAGE FUEL CONSUMPTION RANGE TO EMPTY FUEL TANK rage speed en the ignition is switched off, the rage speed is stored and used as the is of the new value when you continue ing. Reset using the RESET button (C).
eed in miles per hour1
rrent speed is displayed in mph.
rrent fuel consumption sent fuel consumption is calculated every ond. The information on the display is ated every couple of seconds. When the is stationary, " ---- " appears on the
play.
rage fuel consumption average fuel consumption since the last
et (RESET). The average fuel sumption is stored when the ignition is tched off and remains until the function is et. Reset using the RESET button (C).
TE! There may be a slight error in the ding if a fuel-driven heater is used.
Range to empty fuel tank This calculation is based on the average fuel consumption over the last 30 km (19 miles) and the remaining fuel volume. It displays the approximate distance that can be driven with the fuel remaining in the tank. When the range to empty is less than 20 km (12 miles) "----" appears on the display.
NOTE! There may be a slight error in the reading if a fuel-driven heater is used.
Resetting Select average speed or average fuel
consumption. Press and hold the RESET button (C) for
at least five seconds to reset the average speed and average fuel consumption at the same time.
. Certain countries
QV
Instruments and controls
Ri
Wi A. B. C. D. Wi
he headlamps are washed the first time the indscreen is washed. Within the next ten inutes, they are washed every fifth wash of e windscreen. If more than ten minutes asses between washes, the headlamps are ashed every time.
arking/position lamps selected with the witch on the lighting panel:
Bi-Xenon headlamps are only washed every fifth wash cycle irrespective of the time that elapses. Halogen headlamps are not washed.
he switch on the lighting panel is in osition 0:
Bi-Xenon headlamps are only washed every fifth wash cycle irrespective of the time that elapses. Halogen headlamps are not washed.
ght-hand stalk switch
ndscreen wipers Windscreen and headlamp washers Rain sensor - On/Off Thumbwheel Rear window wiper and washer
ndscreen wipers off The windscreen wipers are off when the stalk switch is in position 0.
Single sweep Raise the stalk switch to make a single sweep.
Intermittent wiping The delay between sweeps can be adjusted. Turn the thumbwheel (C) upward for a
shorter interval between sweeps. Turn it downward to increase the delay.
Continuous wiping The wipers sweep at normal speed.
The wipers sweep at high speed.
Windscreen/headlamp washer Pull the stalk switch towards the steering wheel to start the windscreen and headlamp washers. The wipers will make three more sweeps once the stalk is released.
High-pressure headlamp washing (option on certain markets)
High-pressure headlamp washing consumes a large quantity of washer fluid. To save fluid, the headlamps are washed as follows.
Dipped beam selected with the switch on lighting panel:
T w m th p w
P s
T p
RM
Instruments and controls
Ri
Ra The on wip spe adj
Tur sen (An thu
On Wh key win
ght-hand stalk switch
in sensor (option) rain sensor detects the amount of water
the windscreen so that the windscreen ers automatically increase or decrease ed. The sensitivity of the rain sensor is
usted with the thumbwheel (C).
n the thumbwheel upward for higher sitivity and downward for lower sensitivity. extra sweep is made when the
mbwheel is turned upward.)
/Off en activating the rain sensor, the ignition must be in at least position I and the dscreen wiper stalk must be in position 0.
To activate the rain sensor:
press button (B). The rain sensor symbol is shown on the lower display.
To turn the rain sensor off, either:
press button (B). press the stalk switch downward to
another wiper program. If the stalk switch is raised, the rain sensor will remain active; the wipers make an extra sweep and then return to rain sensor mode when the stalk is released to position 0.
The rain sensor is automatically deactivated when the key is removed from the ignition switch or five minutes after the ignition is switched off.
Thumbwheel Use the thumbwheel to adjust the frequency of sweeps when intermittent wiping is selected, or the sensitivity to rain when the rain sensor is selected.
Important! In an automatic car wash: Turn off the rain sensor by pressing button (B) while the ignition key is in at least position I. Otherwise, the windscreen wipers may start and be damaged.
RN
Instruments and controls
Cr
Ac The of t
Set
Cru bel (12
emporary disengagement Press 0 to disengage the cruise control temporarily. CRUISE will be shown on the combined instrument panel. The speed set earlier is stored in the memory.
he cruise control is also temporarily disen- aged when:
the brake pedal or clutch pedal is depressed. speed falls below 25-30 km/h when travelling uphill1. the gear selector is moved to position N. wheel spin or wheel lock-up occurs. a temporary increase in speed lasts longer than one minute.
eturn to the set speed Press this button to resume the previously set speed. CRUISE ON appears on the combined instrument panel.
isengaging ress CRUISE to disengage the cruise ontrol. CRUISE ON goes out on the ombined instrument panel.
uise control (option)
tivating controls for cruise control are to the left
he steering wheel.
ting the desired speed:
Press the CRUISE button. CRUISE is shown on the combined instrument panel. Touch + or to lock the vehicle speed. CRUISE ON appears on the combined instrument panel. ise control cannot be engaged at speeds
ow 30 km/h (20 mph) or above 200 km/h 5 mph).
Increasing or decreasing speed Increase or decrease the speed by
pressing and holding + or . The speed of the car when the button is released is set as the new speed.
Pressing (less than half a second) + or changes the speed 1 km/h (0.6 mph) or 1.6 km/h (1 mph)1.
NOTE! A temporary increase in speed (less than one minute) using the accelerator, such as while overtaking, does not affect the cruise control setting. When you release the accel- erator, the car will return to the programmed speed.
T
T g
R
D P c c
1. Depending on engine type
RO
Instruments and controls
St
The wh tele on key sta the
Pre forw
The adj
The the
eering wheel keypad (option)
four buttons at the bottom of the steering eel keypad control the radio and the phone. The function of a button depends
which system is active. The steering wheel pad can be used to scroll between preset tions, change CD/MD tracks and adjust volume.
ss and hold one of the arrow keys to fast ard/reverse or search for the next station.
telephone must be in standby mode to ust audio system settings.
telephone must be activated to control telephone functions using the arrow keys.
RP
Instruments and controls
St
St The hei
Ad of ch po
eering wheel adjustment, hazard warning flashers
eering wheel adjustment steering wheel can be adjusted for both
ght and reach. Pull the lever towards you to release the steering wheel. Adjust the steering wheel to the position that suits you best. Push back the lever to fix the steering wheel in place. If the lever is stiff, press the steering wheel lightly at the same time as you push the lever back.
Hazard warning flashers Use the hazard warning flashers (all direction indicators flash) when the car is stopped where it could be a traffic hazard or obstruction. Press the button to activate the function.
NOTE! Regulations regarding the use of hazard warning flashers vary from country to country.
WARNING! just the steering wheel before driving
f, never while driving. Before driving, eck that the steering wheel is fixed in sition.
RQ
Instruments and controls
Pa
Pa The The war pan
The bra the
To
Ele The acc
rking brake, electrical socket
rking brake (handbrake) lever is located between the front seats. parking brake acts on the rear wheels. A
ning symbol on the combined instrument el lights when the brake is applied.
warning symbol lights even if the parking ke is only applied one notch. Check that lever is properly applied.
release the parking brake:
Pull the lever up slightly and press in the button. Lower the lever and release the button.
ctrical socket in the rear seat electrical socket can be used for 12 V
essories, such as mobile phone chargers
and coolers. The maximum current is 10 A. For the socket to supply current, the ignition key must be in at least position I.
Cigarette lighter (option) Activate the lighter by pushing in the button. The button pops out when the lighter is hot. Pull out the lighter and light a cigarette on the heated coils.
WARNING! Always leave the plug in the socket when the socket is not in use.
RR
Instruments and controls
Po
Op The con mu win to w key doo
To
To
Re but All aut cen
To
utomatic operation Fully depress one of the controls (A) or (B) or raise it fully, then release. The side window will then open or close automati- cally. If the window is obstructed by an object, the movement will stop.
M pa th
WARNING! If there are children in the car: Remember to switch off the supply to the power windows by removing the ignition key if the driver leaves the car. Make sure that childrens and other passengers hands are clear when closing the windows.
WARNING! If the rear door windows are operated from the drivers door: Check that none of the rear seat passengers are in danger of getting their hands caught when closing the windows.
wer windows
eration power windows are operated using the
trols in the door armrests. The ignition key st be in position I or II for the power dows to operate. The windows continue ork when the car is stopped and ignition removed, provided neither of the front rs is opened.
open a window:
Depress the front of the control. close a window:
Raise the front of the control. mote control and central locking tons side windows can be opened/closed omatically with the remote control or the tral locking buttons:
Press and hold the lock button for two seconds - the windows will open or close. interrupt opening/closing:
Press the lock button again.
A. Front door window B. Rear door window
Drivers door The driver can operate all of the power windows from the drivers seat.
The windows in the front doors can be opened and closed in two ways:
Manual operation Depress one of the controls (A) or (B)
gently or raise it gently. The power window opens or closes as long as the switch is actuated.
A
WARNING! ake sure that childrens or other ssengers hands are clear when closing e windows by remote control.
RS
Instruments and controls
Po
Blo chil Blo doo The
The from
NO loc tha the ele me
ront passenger seat
ront passenger seat he control in the front passenger door perates that window only.
1
wer windows
cking rear power windows and electric d safety locks1
cking power windows in the rear rs switch LED is lit.
rear door windows can only be operated the drivers door.
TE! If the car has electric child safety ks1 on the rear doors, the LED indicates t these are activated. The doors cannot n be opened from the inside. When the ctric child safety locks are activated, a text ssage is shown on the display.
The switch LED is unlit The rear door windows can be operated both with the control on each rear door and with the controls on the drivers door.
F
F T o
. Option
RT
Instruments and controls
Re The the the blo the rea the doo win
ar power windows rear door windows can be operated with
control on each door or with the switch on drivers door. If the LED in the switch for
cking the rear power windows (located in control panel in the drivers door) is lit, the r door windows can only be operated from drivers door. The windows in the rear rs are operated in the same way as the dows in the front doors.
RU
Instruments and controls
Re
Int Dip 1. 2. 3.
Au A s det the Vol
NO mir dim
alibrating the compass he compass may need calibrating in special ases (setting points of the compass). The tter C is shown in the mirrors display if the ompass needs calibrating.
Stop the car in a large open area. Start the car. Press and hold button (1) (use the point of a pen or similar) for at least six seconds. The character C will reappear. Drive slowly in a circle at a speed of no more than 10 km/h until a compass direction appears on the display. Calibration is complete.
arview and door mirrors
erior rearview mirror ping Dip the mirror with the lever Normal position Dipped position. Use this to reduce annoying dazzle from the headlights of following vehicles.
todimming (option) ensor (4) on the bottom edge of the mirror ects light coming from behind and dims mirror if the light is strong. An authorised vo workshop can adjust the sensitivity.
TE! The illustration is a montage. The ror has either manual dipping or automatic ming, never both at the same time.
Rearview mirror with compass (option on certain markets) The upper right-hand corner of the rearview mirror has an integrated display that shows the compass direction in which the front of the car is pointing. Eight different directions are shown with English abbreviations: N (north), NE (north east), E (east), SE (south east), S (south), SW (south west), W (west) and NW (north west).
C T c le c
RV
Instruments and controls
Ma Ad The The to w
Sel
oor mirrors he controls for adjusting the two door irrors are at the front of the drivers door
rmrest.
Press the L button for the left-hand door mirror or R for the right-hand door mirror. The LED in the button lights. Adjust the position with the joystick in the centre. Press the L or R button again. The LED should no longer be lit.
etractable power door mirrors ption)
he mirrors can be retracted for parking and riving in narrow spaces.
gnetic zones justing the zone earth is divided into 15 magnetic zones. compass is set for the geographical area hich the car was delivered.
ect a different compass area as follows:
Turn on the ignition. Press and hold button (1) for at least three seconds (use the point of a pen or similar). The number for the current area is displayed. Press the button repeatedly until the number for the required geographic area (1-15) is shown.
The display will revert to showing the compass direction a few seconds after you stop scrolling.
D T m a
R (o T d
SM
Instruments and controls
Re
Im D th U pa
Th to ap
arview and door mirrors
Press the L and R button at the same time. Release them after approximately one second. The mirrors automatically stop in the fully retracted position.
Folding out the mirrors Press the L and R button at the same
time. The mirrors automatically stop in the fully extended position.
Resetting to neutral Mirrors that have been moved out of position by an external force must be reset to the neutral position for electric retracting and extending to work.
Proceed as follows:
Press the L and R button to retract the mirrors.
Extend the mirrors again with the L and R button. The mirrors are now reset to the neutral.
Home safe and approach lighting The lamps on the door mirrors light when the home safe lighting or approach lighting is activated.
portant! o not use a scraper to remove ice from e mirrors as this can scratch the glass. se the defroster function instead, see ge 69.
WARNING! e driver-side door mirror is wide angled provide optimal vision. Objects may pear further away than they actually are.
SN
Instruments and controls
Po
Op The pan pos
Ven edg
Slid
The
Pull the control rearward to the end position (1) and release.
liding position utomatic operation ull the control past the point of sistance (2) to the rear end position (1) or ast the point of resistance (3) to the forward nd position (4) and release. The sunroof pens/closes completely.
anual operation pen:
Pull the control rearward to the point of resistance (2). The sunroof moves toward the fully open position as long as the button is held in this position.
lose:
Press the control forward to the point of resistance (3). The sunroof moves toward the closed position as long as the button is held in this position.
If S by le
WARNING! The sunroofs pinch-protection function only operates during automatic closing, not manual closing.
wer sunroof (option)
en positions sunroof controls are located in the roof el. The sunroof can be opened to two itions:
tilation position, raised at the rear e (A).
ing position, backwards/forwards (B).
ignition key must be in position I or II.
1. Opening, automatic 2. Opening, manual 3. Closing, manual 4. Closing, automatic 5. Opening, ventilation position 6. Closing, ventilation position Ventilation position Open:
Press the rear edge of the control (5) upward.
Close:
Pull the rear edge of the control (6) downward.
From ventilation position to fully open sunroof:
S A P re p e o
M O
C
WARNING! there are children in the car: witch off the supply to the power sunroof
removing the ignition key if the driver aves the car.
SO
Instruments and controls
Po
Clo co Clo loc
If yo
wer sunroof (option)
sing using the remote ntrol or central locking button sing using the remote control or central king button:
Press and hold the lock button for two seconds. The sunroof and windows close and the doors lock. u need to interrupt closing:
Press the lock button again.
Sunscreen The sunroof features a manual, sliding interior sunscreen. The sunscreen slides back automatically when the sunroof is opened. Grip the handle and slide the screen forwards to close the screen.
Pinch protection The sunroofs pinch protection function is activated if the hatch is blocked by an object. If blocked, the sunroof will stop and automat- ically open to the previous position.
WARNING! Make sure that the hands of children and passengers are clear when closing the sunroof by remote control.
WARNING! The sunroofs pinch protection function only operates during automatic closing, not during manual closing. Make sure childrens hands are clear when closing the sunroof.
SP
Instruments and controls
Pe
Co
Po Per the
ecirculation timer hen the timer is active, the air recirculates r 3-12 minutes, depending on the outside
ir temperature.
Select On/Off depending on whether you wish the recirculation timer to be active.
eset all esets the climate function options to the ctory settings.
ar settings nlock feedback light he hazard warning flashers can provide edback when the car is unlocked with the mote control. This function can be turned n or Off.
ock feedback light he hazard warning flashers can provide edback when the car is locked with the mote control. This function can be turned n or Off.
utolock he doors and boot lid can be locked utomatically when the car starts to move. he setting options are On or Off.
nlock doors here are two alternatives for unlocking:
All doors one press of the remote control unlocks all doors.
rsonal preferences
ntrol panel
ssible settings sonal preferences can be set for some of cars functions: the locks, climate control
and audio functions. For audio functions, see page 183.
Control panel A. Display B. MENU C. EXIT D. ENTER E. Navigation Use The settings are shown on the display (A).
Open the menu to enter settings:
Press MENU (B). Scroll, for example, to "Car Settings" with
the navigation button (E). Press ENTER (D). Select an alternative with the navigation
button (E). Activate your selection with ENTER. Close the menu:
Press EXIT (C) for approximately one second.
Climate control Automatic fan adjustment The fan speed can be set to AUTO mode in cars equipped with ECC:
Select between Low, Normal and High.
R W fo a
R R fa
C U T fe re O
L T fe re O
A T a T
U T
SQ
Instruments and controls
Pe
Ke
Ap Sel on pre ava
Ho Sel on bac The 30/
Inf
rsonal preferences
Drivers door first, then all others one press of the remote control unlocks the drivers door. A second press then unlocks all the other doors.
yless door opening All doors - all doors are locked or unlocked at the same time. Doors on the same side - front and rear doors on the same side are unlocked together. Both front doors - both front doors are unlocked together. One front door - one of the front doors (either) can be unlocked separately.
proach lighting ect the time the cars lights should remain when the approach lighting button is ssed. The following alternatives are ilable: 30/60/90 seconds.
me safe lighting ect the time the cars lights should remain when the left-hand stalk switch is pulled k after the ignition key has been removed. following alternatives are available:
60/90 seconds.
ormation VIN (Vehicle Identification Number). The cars unique identity number.
Number of keys. The number of keys registered for the car is shown.
SR
Climate control General information on climate control 66 Manual climate control, A/C 68 Electronic climate control, ECC (option) 70
Air distribution 73 Fuel-driven parking heater (option) 74
SS
Climate control
Ge
Air The and pas with con
NO off, pas win on
Mi Red on reg
Ice Rem con bon
Fa An me or r Ent per
Re The refr
r vents in the dashboard Open Closed Lateral airflow Vertical airflow the outer vents towards the side
dows to remove misting.
ld weather: Close the centre vents for timum comfort and best demisting.
neral information on climate control
conditioning climate control system cools or heats, dehumidifies the air entering the
senger compartment. The car is equipped either manual (A/C) or electronic climate
trol (ECC).
TE! The air conditioning can be switched but for optimum air quality in the senger compartment and to prevent the dows from misting up, it should always be (even at temperatures of 0-15 C).
sting windows uce the problem of windows misting up
the inside by cleaning the windows. Use a ular window cleaner.
and snow ove ice and snow from the climate
trol air intake (the grille between the net and the windscreen).
ult tracing authorised Volvo workshop has the instru- nts and tools required for any fault tracing epair of your climate control system. rust checks and repairs only to trained sonnel.
frigerant air conditioning system contains R134a
igerant. This refrigerant contains no
chlorine, which means that it is harmless to the ozone layer. The system must only be charged with R134a refrigerant. Have an authorised Volvo workshop carry out this work.
Passenger compartment filter All air which enters the passenger compartment is first cleaned by a filter. This filter must be replaced regularly. Follow the Volvo Service Programme for the recom- mended replacement intervals. If the car is used in a severely contaminated environment, it may be necessary to replace the filter more often.
NOTE! There are several different types of passenger compartment filter. Ensure that the correct filter is installed.
Display There is a display above the climate control panel that displays climate control settings.
Personal preferences You can set preferences for two climate control functions:
Fan speed in AUTO mode (applies only to cars with ECC).
Recirculation timer for passenger compartment air.
For information about these settings, see page 63.
Ai A. B. C. D. Aim win
Co op
ST
Climate control
EC Act The the fac rad
Se
NO with
Sid To sat sun
Acc The tem tem
Ven Do car clo
C (option) ual temperature temperature you select corresponds to physical experience with reference to
tors such as air speed, humidity and solar iation in and around the car.
nsor location: The sun sensor is on the top side of the dashboard. The temperature sensor for the passenger compartment is behind the climate control panel. TE! Do not cover or block the sensors clothing or other objects.
e windows and sunroof ensure that the air conditioning works isfactorily, close all side windows and the roof (if fitted).
eleration air conditioning system switches off porarily at full throttle. You may feel a porary rise in temperature.
tilation slots in the parcel shelf not obstruct the ventilation slots for the go compartment in the parcel shelf with thing or other objects.
Condensation In warm weather, condensation from the air conditioning system may drip under the car. This is normal.
SU
Climate control
Ma
Co 1. 2. 3. 4. 5. 6. 7. 8. 9.
. Recirculation Recirculation can be used to shut out bad air, exhaust fumes, etc. from the passenger compartment. The air in the passenger compartment is recirculated.
o outside air is taken into the car when this nction is activated. Recirculation (together ith the air conditioning system ) cools the assenger compartment more quickly in hot eather. If the air in the car recirculates for o long, there is a risk of the windows isting.
nual climate control, A/C
ntrol panel Fan Recirculation Defroster Air distribution AC - ON/OFF Heated front left seat Heated front right seat Rear window and door mirror defrosters Temperature
Functions 1. Fan
Increase or decrease the fan speed by turning the knob.
If the knob is turned anticlockwise and the fan indicator in the display goes out, the fan and the air condi-
tioning are switched off. The display shows the fan symbol and OFF.
2
N fu w p w to m
SV
Climate control
Tim The mis See pag the gag
3. D
4. A
abo
nction is active if one LED is lit in the switch. he door mirror heating is deactivated utomatically after approximately 6 minutes. he rear window heating is deactivated after pproximately 12 minutes.
. Temperature Select cooling or heating for both driver and passenger side.
er timer function minimises the risk of icing,
ting and bad air if recirculation is selected. the Personal Preferences section,
e 63, for how to activate and deactivate function. Recirculation is always disen- ed when you select Defroster (3).
efroster Defroster quickly removes misting and ice from the windscreen and side windows.
Air is directed to the windows at high fan speed. The LED in the defroster button lights when the function is active. The air condi- tioning system gives maximum dehumidifi- cation. The air does not recirculate. ir distribution
The airflow can be distributed to the windows, dashboard vents or floor by pressing the air distribution buttons.
A symbol on the display ve the climate control panel and a lit LED
in the button indicate which function has been selected.
See the table on page 73.
5. AC - ON/OFF ON: Air conditioning is engaged. OFF: Air conditioning is disengaged. If Defroster (3) is activated the air condi- tioning is always engaged.
6 and 7. Heated front seats (option on certain markets)
Higher heat level Press the button once - both LEDs light. Lower heat level
Press the button twice - one LED lights. Heat off
Press the button three times - LEDs not lit.
8. Rear window and door mirror defrosters
Heating is used to quickly remove misting and ice from the rear window and door mirrors.
The rear window and door mirrors are defrosted simul-
taneously if the switch is pressed once. The
fu T a T a
9
TM
Climate control
El
Co 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
. Fan Increase or decrease fan speed by turning the knob. The fan speed is regulated automatically if AUTO is selected and the previously set fan speed is disengaged.
OTE! If the knob is turned anticlockwise and e fan indication on the display goes out, the n and the air conditioning are switched off. he display shows the fan symbol and OFF.
ectronic climate control, ECC (option)
ntrol panel AUTO Fan Recirculation/Air quality system Defroster Air distribution AC - ON/OFF Heated front left seat Heated front right seat Rear window and door mirror defrosters Temperature
Functions 1. AUTO
The AUTO function automatically regulates climate control and maintains the desired temperature. The AUTO function controls heating, air
conditioning, fan speed, recirculation, and air distribution. If you select one or more manual functions, the other functions continue to be controlled automatically. All manual settings are switched off when AUTO is switched on. The display shows AUTO CLIMATE.
2
N th fa T
TN
Climate control
3. R
No fun cul on
Tim The mis See to a
NO cula
3. A
par pol Wh air, pas
. Defroster Defroster quickly removes misting and ice from the windscreen and side windows. Air flows to the windows at high fan speed. The LED in the defroster
utton lights when the function is active. The ir conditioning system gives maximum ehumidification. The air is not recirculated.
. Air distribution The airflow can be distributed to the windows, dashboard vents or floor by pressing the air distribution buttons.
A symbol on the display bove the climate control panel and a lit LED the button indicate which function has
een selected.
ee the table on page 73.
. AC ON/OFF The air conditioning system is controlled automatically by the system when the ON LED is lit. This way, incoming air is sufficiently cooled and dehumidified.
hen the OFF LED lights, the air condi- oning system is always disengaged. Other
ecirculation Recirculation can be used to shut out bad air, exhaust fumes, etc. from the passenger compartment. The air in the passenger compartment is recirculated.
outside air is taken into the car when this ction is activated. If the air in the car recir- ates for too long, there is a risk of misting the insides of the windows.
er timer function minimises the risk of icing,
ting and bad air if recirculation is selected. Personal Preferences, page 63, for how
ctivate and deactivate the function.
TE! When Defroster (4) is selected, recir- tion is always deactivated.
ir quality system (option) (same button as recircu- lation)
The air quality system consists of a multi-filter and a sensor. The filter separates gases and
ticles to reduce the levels of odours and lution in the passenger compartment. en the sensor detects polluted outside the air intakes are closed and the air in the senger compartment is recirculated.
A green LED (A) lights in the button when the air quality sensor is active.
Activating the air quality sensor: Press the AUTO button (1) to activate the
air quality sensor (normal setting). Or:
Switch between three functions by pressing repeatedly the recirculation button.
Air quality sensor engaged - LED (A) lights.
No recirculation engaged, provided it is not required for cooling in hot weather - LED not lit.
Recirculation engaged - LED (M) lights. Keep in mind the following: As a rule, the air quality sensor should
always be engaged. Recirculation is limited in cold weather to
avoid misting. If the insides of the windows start misting
up, disengage the air quality sensor. The defroster function for the front, side
and rear windows can also be used to demist the windows.
4
b a d
5
a in b
S
6
W ti
TO
Climate control
El
fun Wh tion cat
7 a
9. H
tan fun The aut The app
ectronic climate control, ECC (option)
ctions are still controlled automa tically. en Defroster (4) is selected, the air condi- ing system is set for maximum dehumidifi- ion.
nd 8. Heated front seats (option on certain markets)
To activate front seat heating:
Higher heat level: Press the button once - both LEDs light. Lower heat level: Press the button twice - one LED lights. Heat off: Press the button three times - LEDs not lit.
eated rear window and door mirrors Heating is used to quickly remove misting and ice from the rear window and door mirrors.
The rear window and door mirrors are defrosted simul-
eously if the switch is pressed once. The ction is active if one LED is lit in the switch. door mirror heating is deactivated
omatically after approximately 6 minutes. rear window heating is deactivated after roximately 12 minutes.
10. Temperature selector The temperatures on the driver and passenger sides can be set independently.
Press the button once to activate one side. Press again to activate the other
side. Press the button a third time to activate both sides.
The active side is indicated by an LED in the button and on the display above the climate control panel.
When the car is started, the previous settings are resumed.
NOTE! Heating or cooling cannot be hastened by selecting a higher or lower temperature than the actual desired temperature.
TP
Climate control
Ai
Air istribution Use: the floor and ws. Some air to the dashboard nts.
To ensure comfortable condi- tions and good demisting in cold or humid weather.
floor and from oard air vents.
In sunny weather with cool outside temperatures.
the floor. Some ws to the oard air vents indows.
To warm the feet.
w to windows, dashboard air and to the floor.
To provide cooler air for the feet or warmer air to the upper body in cold weather or hot, dry weather.
r distribution
distribution Air distribution Use: Air d Air to windows. Some air flows to the dashboard air vents. The air is not recircu- lated. Air conditioning is always engaged.
To remove ice and misting quickly.
Air to windo flows air ve
Air to windscreen and side windows. Some air flows to the dashboard air vents.
To prevent misting and icing in a cold and humid climate. (Not for low fan speed.)
Air to dashb
Airflow to windows and from dashboard air vents.
To ensure good comfort in warm, dry weather.
Air to air flo dashb and w
Airflow to the head and chest from the dashboard air vents.
To ensure efficient cooling in warm weather.
Airflo from vents
TQ
Climate control
Fu
Ge he The ate usin refe The hea out the tem
arning decal on fuel filler flap
WARNING! The car must be outdoors when the petrol or diesel heater is used.
el-driven parking heater (option)
neral information about aters parking heater can be started immedi-
ly or set with two different start times g TIMER 1 and TIMER 2. Here, start time rs to the time the car is heated and ready. cars electronic system calculates when
ting should be started based on the side temperature. The heater is not run if outdoor temperature exceeds 25 C. At peratures of 10 C and below, the
maximum running time of the parking heater is 60 minutes.
W
WARNING! The car must be outdoors when the petrol or diesel heater is used.
WARNING! Switch off the fuel-driven heater before refuelling. Spilled fuel could be ignited by the exhaust gases. Check on the information display that the heater is off. (When the additional heater is running, PARK HEAT ON is shown on the information display.)
TR
Climate control
Ac
Pa If th the the
Dir
Im
NO wh
Scroll with the thumbwheel to the desired minute. Touch RESET to confirm the setting. Press RESET to activate the timer. After setting TIMER 1, a second start time can be programmed with TIMER 2 . Access this with the thumbwheel. Set the alter- native start time in the same way as TIMER 1.
tivating the heater Enter the time when the car is to be used. Press RESET (C) to enter the hours and minutes. Press and hold the RESET button until the timer is activated.
rking on a hill e car is parked on a steep hill, the front of car should point downhill to ensure that re is a supply of fuel to the parking heater.
ect start Use the thumbwheel (B) to scroll to DIRECT START. Press RESET (C) to access the options ON and OFF. Select ON. The heater will now run for 60 minutes. Heating of the passenger compartment will begin as soon as the engine coolant has reached a temper- ature of 30 C.
mediate stop of heater Use the thumbwheel (B) to scroll to DIRECT START. Press RESET (C) to access the options ON and OFF. Select OFF. TE! The car can be started and driven ile the parking heater is still running.
Battery and fuel If the battery has insufficient charge or the fuel level is too low, the parking heater will be switched off automatically. A message appears on the information display. Acknowledge the message by pressing the READ button (A).
Setting TIMER 1 and 2 For safety reasons, you can only programme times for the following 24 hours, not several days in advance.
Scroll with the thumbwheel to TIMER. Touch RESET to move to the flashing
hours setting. Scroll with the thumbwheel to the desired
hour. Touch RESET to move to the flashing
minutes setting.
Important! Repeated use of the parking heater combined with short journeys may discharge the battery and impair starting. If the heater is used regularly, the car must be driven for the same as the heater is run to ensure that the alternator has time to charge the battery.
TS
Climate control
Fu
Me Wh STA on an ma wh the
Clo If th are can
Ad (ce
Ext req tem
The wh run the the
el-driven heater (option)
ssages on the display en TIMER 1, TIMER 2 and DIRECT RT are activated, the information symbol
the combined instrument panel lights and explanatory text appears on the infor- tion display. The display also indicates ich timer is active when the driver removes key from the ignition to leave the car.
ck/timer e car clock is reset after the heater timers programmed, the selected times will be celled.
ditional heater (diesel) rtain countries)
ra heat from the additional heater may be uired in cold weather to reach the correct perature in the passenger compartment.
additional heater starts automatically en extra heat is required if the engine is ning. It is switched off automatically when correct temperature is reached or when engine is switched off.
TT
Interior Front seats 78 Interior lighting 80 Storage spaces in the passenger compartment 82
Rear seat 84 Cargo area 86
TU
Interior
Fr
Se The adj pos
1.
2.
3.
4.
owering the front seat ackrest he passenger seat backrest can be folded rward to make room for long loads.
Move the seat as far back as possible. Adjust the backrest to an upright position 90 degrees. Lift the catches on the rear of the backrest while folding it forwards.
ont seats
ating position drivers and passenger seats can be
usted to the optimum sitting and driving itions.
Forward/backward: lift the handle to adjust the distance to the steering wheel and pedals. Check that the seat is locked after changing position. Raise/lower the front of the seat cushion: pump up/down (option on passenger side). Raise/lower the seat: pump up/down (option on passenger side). Lumbar support (option, passenger side), turn the wheel.
5. Backrest rake: turn the wheel. 6. Control panel for power seat (option). Controls (2) and (3) are not present on all seat models.
L b T fo
WARNING! Adjust the position of the drivers seat before setting off, never while driving. Check that the seat is locked in position.
TV
Interior
Po Pre The key with with clo ign can bei
Me The sto to t unl
bout 20 seconds before adjusting the seat gain.
mergency stop the seat accidentally begins to move, press ne of the buttons to stop the seat.
WARNING! Ensure that there is nothing in front of, behind, or under the seat during adjustment. Ensure that none of the backseat passengers will be trapped. To avoid injury, ensure that children do not play with the switches.
wer seat (option) parations seat is normally adjusted with the ignition is in position I or II. It can also be adjusted in 10 minutes of the door being unlocked the key or remote control. If the door is
sed and the ignition key is not yet in the ition, or is in the 0 position, adjustments be made within 40 seconds of the door
ng closed.
mory function in remote control remote control used to unlock the car
res information about the changes made he seat settings. When the car is next ocked with the same remote control and
the door is opened within two minutes, the drivers seat returns to the stored position.
Seat with memory function (option) 1. Seat adjustment, memory 1 2. Seat adjustment, memory 2 3. Seat adjustment, memory 3 4. Storing preset positions Three positions can be stored. After adjusting the seat, press and hold button M (4) and then press button (1). Further seat settings can be stored in the memory using memory buttons (2) and (3).
Setting preset positions Press and hold one of the memory buttons (1), (2) or (3) until the seat stops. If you release the button, the seat stops immediately for safety reasons.
Seat adjustment The following can be set with switches (5), (6) and (7):
5. Backrest rake 6. Seat forward/backward and up/down 7. Front edge of seat cushion up/down Only one of the electric motors can be operated at a time. The power front seats have overload protection which is tripped if a seat is blocked by an object. If this happens, turn off the ignition (position 0) and wait
a a
E If o
UM
Interior
Int
Fro 1. 2. 3. The com the
Sw pas
ar seat lighting rn the lights on or off by pressing the propriate button. The lighting is turned off omatically ten minutes after the engine is itched off.
erior lighting
nt seat lighting Lighting for left-hand side Switch Lighting for right-hand side lighting in the front part of the passenger partment is controlled with the buttons in roof console.
itch (2) has three positions for all senger compartment lighting:
Off - right side depressed, passenger compartment lighting is switched off. Neutral position - passenger compartment lighting comes on when a door is opened and goes out when the door is closed. The dimmer function is active.
On - left side depressed, passenger compartment lighting is on.
Automatic lighting The interior lighting switches on and off automatically when switch (2) is in the neutral position. See illustration.
The lighting comes on and remains on for 30 seconds if:
the car is unlocked from outside with the key or remote control.
the engine is stopped and the ignition key is turned to position 0.
The compartment lighting comes on and remains on for five minutes if:
one of the doors is open. the lighting is not switched off. The interior lighting is switched off when:
the engine is started. the car is locked from outside with the key
or remote control. The interior lighting is automatically switched off five minutes after the engine is switched off. The interior lighting can be switched on or off within 30 minutes of the key being turned to position 0 by briefly pressing button 2. The programmed times can be changed in accordance with the instructions in the Personal Preferences section, see page 59.
Re Tu ap aut sw
UN
Interior
Va The cov
1
nity mirror1
light comes on automatically when the er is lifted.
. Option on certain markets.
UO
Interior
St
UP
Interior
St 1.
2. 3. 4. 5. 6. 7.
Im Th a ha
E ob th br A w
orage spaces Storage pocket (also on the front edge of the front seat cushions). Compartment in door panel. Ticket clip. Glovebox. Waste bin (accessory). Storage compartment and cup holder. Storage compartment and cup holder.
Glovebox The owners manual and maps can be kept here. There are also holders for coins, pens and fuel cards. The glovebox can be locked with the removable key blade in the remote control. For further information about the key, see page 88.
Floor mats (option) Volvo supplies floor mats specially manufac- tured for your car. These should be properly anchored with the clips on the floor so they do not slide and get jammed beside or under the drivers pedals.
portant! e waste bin (5) must not be mounted if phone handset is mounted on the right- nd side of the centre console.
WARNING! nsure that no hard, sharp or heavy jects lie or protrude in such a way that
ey could cause injury during heavy aking. lways secure large and heavy objects ith a seatbelt or cargo retaining straps.
UQ
Interior
Re
Ce All to s edg with the hea han the
To but hea
ipping the rear seat backrest he rear seat backrests can be tipped rwards together, or individually, to make it
asier to transport long objects. To avoid amaging the seatbelts when folding the ackrests up or down, these should be ooked onto the grab handles.
Hang the seatbelts on the hooks before lowering or raising the backrests. Lift the rear edge of the seat cushion (1) in order to fold the seat cushions forward.
ar seat
ntre rear head restraint head restraints can be adjusted vertically uit the height of the passenger. The upper e of the head restraint should be aligned the middle of the back of the head. Raise
head restraint if necessary. To lower the d restraint, press the button by the right- d pillar at the same time as pushing down head restraint.
remove the head restraint, press the ton by the right-hand pillar while lifting the d restraint.
T T fo e d b h
Important! The head restraints can be damaged if they are not removed for loading. The centre head restraint must also be removed for heavy loads.
UR
Interior
Low
NO the sho pla
ering the backrest Pull the lock (2) catch up and forward to release the backrest. A red indicator on the lock catch shows that the backrest is no longer locked in place. Fold the backrest (3) forward halfway and remove the head restraint. The centre seats head restraint must be lowered fully or removed. Place the head restraints in the plastic sleeves on the undersides (4) of the raised seat cushions. TE! When the backrest has been raised, red indicator should no longer be wing. If it is, the backrest is not locked in ce.
WARNING! Remember to take down the seatbelts once you have raised the backrest.
US
Interior
Ca
Lo The stra are
ag holder (option) he bag holder holds shopping bags in place nd prevents them tipping over and spilling eir contents.
Open the hatch in the cargo area. Secure the shopping bags with the strap.
rgo area
ad retaining eyelets load retaining eyelets are used to fasten ps or nets to anchor items in the cargo a.
Electrical socket in the cargo area Fold down the cover to access the electrical socket. This socket works regardless of whether the ignition is on. If the ignition is switched off and an appliance requiring a current greater than 0.1 A is plugged into the electrical socket, a warning message appears on the information display. Avoid using the electrical socket with the ignition switched off due to the risk of running the battery flat.
B T a th
UT
Locks and alarm Remote control with key blade 88 Keyless drive (option) 91 Locking and unlocking 93
Child safety locks 95 Alarm (option) 96
UU
Locks and alarm
Re
Re The The con for driv lab Kee aut new key one
Lo If yo the Vol rem pre
Im The chi rea car con
. Boot lid - Press the button once to unlock the boot lid only.
. Panic function - Used to attract attention in an emergency. Press and hold the red button for at least three seconds or press it twice within three seconds to activate the direction indicators and the horn. The function can be turned off with the same button once it has been active for at least five seconds. The function switches off automatically after 30 seconds.
ey blade his feature is intended for when leaving the ar, such as for servicing or valet parking at a otel. Hand over the remote control and keep e removable key blade.
ccess to the glovebox and cargo ompartment can be prevented using the
mote control's removable key blade1. This eans that the remote control can only open e doors and that the car can be driven.
Important! The narrow section of the remote control is particularly sensitive - this contains the chip. The car cannot be started if the chip is damaged.
1. Certain markets only
mote control with key blade
mote control car is supplied with two remote controls. se also work as ignition keys. The remote trols contain a removable metal key blade the manual locking and unlocking of the ers door and the glovebox. A separate el with the code for key blade is included. p this label in a safe place. Take it to an
horised Volvo workshop when ordering keys. A maximum of six remote controls/
blades can be programmed and used for car.
ss of a remote control u lose a remote control, take the car and other remote control to an authorised vo workshop. The code of the missing ote control must be erased as a theft vention measure.
mobiliser remote controls are fitted with coded
ps. The code must be accepted by the der (receiver) in the ignition switch. The can only be started if the correct remote trol with the correct code is used.
Remote control functions 1. Locking - Locks the doors and the boot
lid. Press and hold to close the windows and sunroof.
2. Unlocking - Unlocks the doors and boot lid. Press and hold to open the windows.
3. Approach lighting - When you approach the car: Press the yellow button on the remote control to switch on the interior lighting, position/parking lights, number plate lighting and door mirror lamps (option). The lighting is switched off automatically after 30, 60 or 90 seconds. For how to set the desired delay time, see page 64.
4
5
K T c h th
A c
re m th
UV
Locks and alarm
Re To con
Ins Be the
bol and REMOTE BATTERY LOW LTAGE appear on the display.
moving the key blade take the key blade out of the remote trol:
Slide the spring-loaded catch (1) to the side while pulling the key blade (2) out.
erting the key blade careful when inserting the key blade into remote control.
Hold the remote control with the narrow end pointing down and lower the key blade into its slot. Lightly press the key blade to lock it in position. You should hear a "click".
1. Active locks, remote control 2. Active locks, key blade
Service locking1
Locking the glovebox: Turn the key blade 90 degrees clockwise.
Service locking: Turn the key blade 180 degrees clockwise. This also locks the boot lid which cannot then be opened with the remote control (a message is shown in the information display).
Weak remote control battery When the battery runs down and full function- ality cannot be guaranteed, the information
sym VO
1. Certain markets only
VM
Locks and alarm
Re
Ch ba If th sig dis (typ
mote control with key blade
anging the remote control ttery e locks repeatedly fail to respond to
nals from the remote control at a normal tance, the battery should be changed e CR 2032, 3 volt).
Pull out the key blade. Place the remote control with the keypad downward and remove the screw (1) using a small screwdriver. Remove the cover. Carefully note the position of the batterys + and poles on the inside of the cover.
Prise out (2) and change the battery. Avoid touching the battery and its terminals with your fingers.
Refit the cover and screw it shut. Press the key blade back into place. Dispose of the old battery in an environmen- tally-friendly way.
VN
Locks and alarm
Ke
Ke sys The unl for con
The con sho oth for
The key add sys
he warning message and reminder signal isappear when the remote control is rought back to the car after one of the llowing actions:
a door has been opened and closed the ignition dial has been turned to position I the READ button has been pressed.
o not leave a remote control in the car a keyless drive remote control is left in the ar, it becomes passive when you lock the ar. No unauthorised person can open the oor. But if someone breaks into the car and nds the remote control, it can be activated nd used again.
yless drive (option)
yless lock and ignition tem keyless drive system allows the car to be
ocked, driven and locked without the need a key. You simply have to have the remote trol with you in a pocket or bag.
system makes it easier and more venient to open the car, for example with pping bags in one hand and a child in the er. It saves you having to take out or look the remote control.
two remote controls incorporate the less drive feature. You can order itional remote controls. The keyless drive tem can handle up to six remote controls.
Remote control max. 1.5 m from the car To be able to open a door or the boot lid, the remote control must be within a maximum of approximately 1.5 m of the cars door handles or boot lid. The grey shaded area in the image shows the area covered by the systems antennae.
If someone leaves the car and takes with them a keyless drive remote control, a warning message appears on the information display while a reminder signal is heard. The warning message disappears when the remote control is brought back to the car or the ignition dial is turned to position I. The warning is only issued if the key dial is in position 1 or 2 after someone has opened and closed a door.
T d b fo
D If c c d fi a
VO
Locks and alarm
Ke
Int Ele inte avo
Do pho me
If in use nor
ll doors and the boot lid must be closed efore the lock button is pushed in. therwise they will not lock.
hen the car is locked, the lock buttons on e inside of the doors retract in the normal ay.
ersonal settings for keyless rive he keyless drive system can be tailored to our personal requirements. Read more bout personal settings on page 64.
yless drive (option)
erference to remote control function ctromagnetic screening and fields can rfere with the keyless drive system. To id this:
not place the remote control near mobile nes, metallic objects or, for example, in a
tal briefcase.
terference is experienced nonetheless, the remote control and key blade in the
mal way. See page 88.
Unlocking Unlock the car by:
opening one of the doors with the handle or opening the boot lid by pressing the button.
Power seat (option) remote control with memory function If several people with keyless drive remote controls get into the car, the drivers seat will be adjusted for the person who opens the door first.
Locking Lock the doors and boot lid by:
pushing in the lock button on one of the door handles.
A b O
W th w
P d T y a
VP
Locks and alarm
Lo
Lo ou You and rem unl
Au If no with loc pre uni pag
Un To
If a clo unt or f
e locked manually with their respective lock uttons. Pull the door handle twice to unlock nd open the door from the inside.
B if
cking and unlocking
cking/unlocking the car from tside can lock and unlock all the cars doors the boot lid simultaneously using the ote control. The drivers door can be
ocked with the key blade.
tomatic relocking ne of the doors or the boot lid are opened in two minutes of unlocking, all are
ked again automatically. This function vents the car from being left unlocked ntentionally. For cars with alarms, see e 97.
locking the boot lid unlock only the boot lid:
Press the boot lid button on the remote control. ll doors are locked when the boot lid is sed, then the boot lid remains unlocked il the car is locked with the remote control rom inside.
Locking/unlocking the car from inside All the doors and the boot lid can be locked or unlocked simultaneously using the switch by the door handle.
Unlocking Press the upper section of the lock
button. Press and hold to also open the side windows.
Locking Press the lower part of the lock button.
Press and hold to also close the windows and sunroof.
It is not possible to unlock a door by pulling up the lock button. All the doors can however
b b a
WARNING! e aware that you can be locked in the car it is locked from the outside.
VQ
Locks and alarm
Lo
Lo The unl rem
emporary deactivation of the eadlocks and any detectors someone is going to stay in the car but you till want to lock the doors from the outside, e deadlocks can be disabled.
Insert the key into the ignition switch, turn it to position II and then back to position I or 0. Press button 1.
the car is equipped with an alarm, ovement and tilt detectors are also deacti-
ated. See page 97.
he LED in the button lights up until the car is cked with the key or the remote control. A essage remains on the display as long as e key is in the ignition switch. The detectors
re reactivated the next time the ignition is witched on.
WARNING! Do not allow anyone to remain in the car without first deactivating the deadlocks.
cking and unlocking
cking the glovebox glovebox can only be locked and
ocked with the removable key blade in the ote control.
Unlock the glovebox (1) by turning the key a quarter of a turn (90 degrees) anticlockwise. The keyhole is vertical in the unlocked position. Lock (2) the glovebox by turning the key a quarter of a turn (90 degress) clockwise. The keyhole is horizontal in the locked position.
1. Deactivation of the detectors 2. No function
Deadlocks When deadlocked, the doors cannot be opened from the inside if they are locked. The deadlocks are activated with the remote control. The deadlocks are set after a 25 second delay after the doors are locked.
The car can only be unlocked from a deadlock state with the remote control. The doors can also be opened from the outside with the key.
T d If s th
If m v
T lo m th a s
VR
Locks and alarm
Ch
Ma
Ma do To fou and ope thu loc
A.
B.
lectric child safety locks and isabling the rear window uttons (option) ress the switch on the drivers door. A essage appears on the information display.
hen the electric child safety locks are ctivated, the rear window buttons are isabled.
o activate the child safety locks:
Turn the ignition key to position I or II. Press the switch. When the LED in the switch is lit, the rear window buttons are disabled.
message appears on the information isplay when the child safety locks are ctivated.
OTE! Cars with electric child safety locks o not also have manual child locks.
hild safety locks activated lit LED together with a text message on the
isplay indicates that the locks are activated. he doors cannot be opened from inside. The ower windows can only be operated with e controls on the drivers door.
ild safety locks
nual child lock in rear left door.
nual child locks in the rear ors lock manually: The child safety locks are nd on the trailing edge of the rear doors are only accessible when the doors are n. Use the key blade to turn the lock and
s activate or deactivate the child safety k.
The doors cannot be opened from inside. The doors can be opened from inside.
Switch for electric child safety locks and disengaging rear power window buttons.
E d b P m
W a d
T
A d a
N d
C A d T p th
WARNING! Always keep the lock buttons pulled up when driving. In the event of an accident, this allows the emergency services to get into the car quickly. Passengers in the rear seat cannot open the doors from inside if the child safety locks are activated.
VS
Locks and alarm
Al
Th Wh mo
The
OTE! Do not attempt to repair or modify larm system components. All such attempts ay affect the terms of insurance.
rming the alarm Press the LOCK button on the remote control. A long flash from the cars direction indicators confirms that the alarm is armed and that all the doors are locked.
isarming the alarm Press the UNLOCK button on the remote control. Two short flashes from the cars direction indicators confirms that the alarm is disarmed and all doors are unlocked.
arm (option)
e alarm system en the alarm is armed, it continually nitors all alarm inputs.
alarm is triggered if:
a door, the bonnet or the boot lid is opened. a non-approved key is used in the ignition or if an attempt is made to force the lock. a movement is detected in the passenger compartment (if fitted with a movement detector). the car is raised or towed away (if fitted with a tilt detector). a battery cable is disconnected. anyone tries to disconnect the siren.
Alarm LED on the dashboard An LED on the dashboard indicates the alarm systems status:
LED not lit - the alarm is not armed. The LED flashes once a second - the
alarm is armed. The LED flashes rapidly after disarming
the alarm and until the ignition is switched on - the alarm has been triggered.
If there is a fault in the alarm system, a message appears on the information display. Contact an authorised Volvo workshop.
If the alarm system does not work correctly, let an authorised Volvo workshop examine the car.
N a m
A
D
VT
Locks and alarm
Au Thi leav
If n ope alar the rea
Sw
Co from
. Deactivation of the detectors
. No function
emporary deactivation of the eadlocks and detectors o prevent the alarm being tripped errone- usly, such as during a ferry journey, the ovement and tilt detectors can be tempo- rily disengaged.
Turn the ignition key to position II and then back to position 0. Remove the key. Press button (1). The LED in the button is lit until the car is locked.
message remains on the display as long as e key remains in the ignition switch (and for minute after the key is removed).
tomatic alarm activation s function prevents you accidentally ing the car without the alarm on.
one of the side doors or the boot lid are ned within two minutes of disarming the m (and the car has been unlocked with remote control), the alarm is automatically rmed. The car is also locked.
itching off a triggered alarm Press the UNLOCK button on the remote control. nfirmation is given by two short flashes
the direction indicators.
Alarm signals When the alarm is triggered, the following happens:
A siren sounds for 30 seconds. The siren has its own battery which is used if the car battery has insufficient charge or is disconnected.
The direction indicators flash for five minutes or until the alarm is deactivated.
Remote control not working If for some reason the remote control is not working, the alarm can still be switched off and the car started as follows:
Open the drivers door with the key blade. The alarm is triggered and the siren sounds.
Insert the remote control into the ignition switch. The alarm is deactivated. The alarm LED flashes rapidly until the ignition key is turned to position II.
1 2
T d T o m ra
A th 1
VU
Locks and alarm
Al
The the
If th eng
Te Tes pas
Tes
arm (option)
detectors are reactivated the next time ignition is switched on.
e car has deadlocks, these are also re- aged.
sting the alarm system ting the movement detector in the senger compartment
Open all the windows. Arm the alarm. Activation of the alarm is confirmed by the alarm LED flashing slowly. Wait 30 seconds. Test the movement detector in the passenger compartment, such as by lifting out a bag from a seat. A siren should sound and all direction indicators flash. Deactivate the alarm by unlocking the car with the remote control. ting the doors
Arm the alarm. Wait 30 seconds. Unlock the drivers door with the key blade. Open one of the doors. A siren should sound and all direction indicators flash. Deactivate the alarm by unlocking the car with the remote control.
Testing the bonnet Sit in the car and deactivate the
movement detector. Arm the alarm. Remain in the car and lock
the doors with the button on the remote control.
Wait 30 seconds. Open the bonnet with the handle under
the dashboard. A siren should sound and all direction indicators flash.
Deactivate the alarm by unlocking the car with the remote control.
VV
Starting and driving General 100 Refuelling 101 Starting the car 102
Keyless drive 104 Manual gearbox 105 Automatic gearbox 107
All-wheel drive 110 Brake system 111 Stability system 113
Parking assistance (option) 115 Towing and recovery 117 Start assistance 119
Driving with a trailer 120 Towing equipment 122 Detachable towbar 124
Loading 129 Adjusting headlamp pattern 130
NMM
Starting and driving
Ge
Ec Driv wh driv con
Sli Pra con rea
En Und driv
not overload the battery e electrical functions in the car load the ttery to varying degrees. Avoid having the ition key in position II when the engine is ned off. Use position I instead, as less wer is used. The 12 volt outlet in the cargo a supplies power even when the ignition is removed.
mples of functions that use a lot of power:
ventilation fan windscreen wipers audio equipment (high volume) parking lights o, be aware of different accessories that d the electrical system. Do not use ctions which use a lot of power when the ine is switched off.
he battery voltage is low, a message pears on the display. The energy-saving ction shuts down certain functions or uces the load on the battery by, for mple, slowing the ventilation fan and itching off the audio equipment. Charge battery by starting the engine.
neral
onomical driving ing economically means driving smoothly
ile thinking ahead and adjusting your ing style and speed to the prevailing ditions.
Get the engine warmed up as soon as possible. Do not let the engine idle, but drive at light loads as soon as it is possible. A cold engine consumes more fuel than a warm one. Avoid sudden unnecessary acceleration and heavy braking. Do not drive with unnecessary loads in the car. Do not use winter tyres when the roads are dry. Remove load carriers when they are not being used. Avoid driving with open windows.
ppery driving conditions ctise driving on slippery surfaces under trolled conditions to learn how the car cts.
gine and cooling system er special conditions, for example when ing in hilly terrain, extreme heat or with
heavy loads, there is a risk that the engine and cooling system will overheat.
Avoid overheating the cooling system Maintain a low speed when driving with a
trailer up long, steep ascents. Do not turn the engine off immediately
you stop after a hard drive. Remove any auxiliary lamps from in front
of the grille if driving in extreme high temperatures.
Avoid overheating the engine Do not drive at more than 4500 rpm
when towing a trailer or caravan in hilly terrain, as the oil temperature can become too high.
Open boot lid Avoid driving with the boot lid open. If it is necessary to drive with the boot lid open for a short distance:
Close all windows. Set the air distribution to the windscreen
and floor and run the fan at high speed.
Do Th ba ign tur po are key
Exa
Als loa fun eng
If t ap fun red exa sw the
WARNING! Do not drive with the boot lid open. Toxic exhaust fumes can be drawn into the car through the cargo area.
NMN
Starting and driving
Re
Sw refu
Op Op ligh be ope righ
Clo Pus
Fu Tur is fe to a on Put unt
etrol
iesel t low temperatures (5 C to 40 C), a araffin precipitate may form in the diesel el, which can lead to ignition problems.
Important! Do not add cleaning additives to the petrol, unless recommended by Volvo.
Important! Use special winter grade fuel during cold months.
fuelling
itch off the fuel-driven heater before elling.
ening the fuel filler flap en the fuel filler flap with the button on the ting panel, see page 45. The engine must switched off before the flap can be ned. The fuel flap is located on the rear t wing.
sing h in the flap until you hear a click.
el filler flap n the fuel cap until an obvious resistance lt. Turn past the resistance until it comes stop. Take out the cap. Hang up the cap
the inside of the fuel filler flap. the petrol cap back after refuelling. Turn
il one or more clear clicks are heard.
Filling up with fuel Fill the tank with fuel until the filler pump cuts out. Too much fuel can overflow in warm weather.
Fuel of a lower quality than that specified on page 216 should not be used as engine power and fuel consumption can be negatively affected.
P
D A p fuWARNING!
Fuel which spills on to the ground can be ignited by the exhaust fumes. Switch off the fuel-driven heater before starting to refuel. Never carry an activated mobile phone when refuelling the ring signal could cause spark build-up and ignite petrol fumes, leading to fire and injury.
NMO
Starting and driving
St
Dep the col cer min eng ope
NO ate
Be Au
Ma
ch normal operating temperature. This ans that regeneration of the diesel particle r does not take place and the filter is not ptied.
en the filter has become approx. 80% full particles then the warning text ENGINE RVICE REQUIRED is shown in the shboard display. generation should be carried out regularly e car is frequently driven short distances old weather in order to avoid impaired ction of the filter. Start regeneration of the filter by driving the car until the engine reaches normal operating temperature, preferably on a main road or motorway. The car should then be driven for approximately 20 minutes more. To clear the warning text when regener- ation is complete, switch off the ignition, remove the key, wait for at least three minutes and switch the ignition on again. Use the parking heater (option) in cold weather so that the engine reaches normal operating temperature more quickly.
N st is po st ac th
portant! the filter fills up with particles then it can
difficult to start the engine and the filter ill be incapable of functioning and must en be replaced.
arting the car
ending on the engine temperature when engine is started, the idling speed after a
d start may be higher than normal for tain engine types. Volvo strives to imise exhaust emissions by having the ine exhaust system reach the correct rating temperature as quickly as possible.
TE! Never rev the engine hard immedi- ly after a cold start.
fore starting the engine Apply the parking brake (handbrake). tomatic gearbox: The ignition key must be in position II, depress the brake pedal and move the gear selector to position P or N. nual gearbox: Put the gear lever in neutral and hold the clutch pedal fully depressed. This is
particularly important in very cold condi- tions.
Starting the engine Petrol engine: Turn the ignition key to position III. If the
engine does not start within 5-10 seconds, release the key and try again.
Diesel engine: Turn the ignition key to position II. A lamp
on the combined instrument panel will come on indicating that the engine preheater is activated. Turn the key to position III when the lamp extinguishes.
Diesel particle filter (certain models) Certain diesel cars are equipped with a particle filter which results in additionally effective exhaust purification. When the engine is at its normal operating temperature (the engine is warm) a "regeneration" of the filter takes place automatically, which means that the particles collected in the filter are burned away and the filter is emptied.
Regeneration takes between five and ten minutes. During this time fuel consumption may increase slightly.
Winter driving If the car is frequently driven short distances in cold weather then the engine does not
rea me filte em
Wh of SE da Re if th in c fun
WARNING! ever remove the ignition key from the eering lock while driving or when the car being towed. The ignition key must be in sition (II) when the car is towed. The
eering lock could otherwise be tivated, making it impossible to steer e car.
Im If be w th
NMP
Starting and driving
Ign im The key The acc
hen the steering lock is ctivated the front wheels are positioned so that ere is tension in the steering lock, a warning essage may be shown in the information isplay and the car prohibited from starting.
Remove the key and turn the steering wheel to release the tension. Hold the steering wheel in this position. Reinsert the key and make a new attempt to start the car.
ake sure the steering lock is activated when e car is left to reduce the risk of theft.
WARNING! Never remove the ignition key from the ignition switch while driving or when the car is being towed. The steering lock could otherwise be activated, making it impossible to steer the car.
WARNING! Always remove the ignition key from the ignition when leaving the car, especially if there are children in the car.
ition keys and electronic mobiliser ignition key must not hang with other
s or metal objects on the same key ring. electronic immobiliser could be activated identally.
Ignition switch and steering lock
0 Locked position The steering lock is activated when the key is removed from the lock.
I Radio position Certain electrical compo- nents can be switched on. The engines electrical system is not activated.
II Driving position The key position when driving. The cars electrical system is energised.
III Start position The starter motor is engaged. Release the key, which springs back automatically to the driving position, once the engine has started.
A ticking sound may be heard if the key is between positions. Turn the key to position II and back to eliminate the sound.
W a If th m d
M th
NMQ
Starting and driving
Ke
St Inst ign as t the gea gea saf
For con car
yless drive
arting the car ead of an ignition key, the car has an ition dial. The dial is used in the same way he key. The only difference is that to start car, either the clutch pedal (manual rbox car) or brake pedal (automatic rbox car) must be depressed. This is a
ety measure.
the car to start, the cars passive remote trol/key must be in the passenger or go area.
To start the car:
Depress the clutch or brake pedal. Press in and turn the dial to position III. Ignition dial or ignition key The car can be started with the dial or with the key.
To remove the ignition dial:
Push in the catch and pull out the dial.
NMR
Starting and driving
Ma
Ge Dep cha ped app
For hig
ear positions, six-speed petrol) epress the clutch pedal fully with each gear hange. Remove your foot from the clutch edal between gear changes! Follow the ppropriate shifting pattern.
or the best possible fuel economy, use the ighest gear possible as often as possible.
can be difficult to find the positions for fifth nd sixth gear when the car is stationary as e reverse gear inhibitor (which blocks
ideways movement towards reverse) is then ot activated.
nual gearbox
ar positions, five-speed ress the clutch pedal fully with each gear nge. Remove your foot from the clutch al between gear changes! Follow the ropriate shifting pattern.
the best possible fuel economy, use the hest gear possible as often as possible.
Reverse gear inhibitor, five-speed Only engage reverse gear when the car is stationary. To engage reverse gear, the gear lever must first be put in position N. Reverse gear cannot therefore be engaged directly from fifth gear, because of the reverse gear inhibitor.
G ( D c p a
F h
It a th s n
NMS
Starting and driving
Ma
Re (pe On sta
everse gear inhibitor, six-speed iesel) nly engage reverse gear when the car is
tationary. To engage reverse gear, press the ear lever to the left past the spring-loaded hibitor.
nual gearbox
verse gear inhibitor, six-speed trol) ly engage reverse gear when the car is tionary.
Gear positions, six-speed (diesel) Depress the clutch pedal completely for each gear change. Remove your foot from the clutch pedal between gear changes. Follow the indicated gear pattern. For optimum fuel economy use the highest possible gear as often as possible.
R (d O s g in
Important! The spring-loaded inhibitor can be forced when engaging 1st or 2nd gear if you apply too much pressure to the left when changing gear. This can lead to reverse being engaged when driving forwards.
NMT
Starting and driving
Au
Co Wh cha to t ture gea eng
NO atu spe nor
Kic Wh way reg imm dow
If th dow cha
Kic atio
To pro wh
The ma
isengaging shiftlock certain cases, it may be necessary to move e car when it is not driveable, for example if e battery is flat. Proceed as follows to move e car:
There is a small cover behind P-R-N-D on the gear selector panel. Open the rear edge. Insert the key blade from the remote control. Press down and hold the key blade. The gear selector can now be moved out of the P position.
tomatic gearbox
ld start en starting in low temperatures, the gear nges can sometimes feel hard. This is due he gearbox oils viscosity at low tempera- s. To minimise engine emissions, the rbox shifts up later than normal when the ine is started at low temperatures.
TE! Depending on the engine temper- re when the engine is started, the idle ed after a cold start may be higher than mal for certain engine types.
k-down en the accelerator pedal is pressed all the to the floor, beyond the position normally
arded as full acceleration, a lower gear is ediately engaged. This is known as kick- n.
e accelerator is released from the kick- n position, the gearbox automatically
nges up.
k-down is used when maximum acceler- n is needed, such as for overtaking.
prevent overrevving, the gearbox control gram has a protective downshift inhibitor ich prevents the kick-down function.
kick-down function cannot be used in nual gear position (Geartronic).
Safety systems Cars with an automatic gearbox have special safety systems:
Keylock To remove the ignition key, the gear selector must be in the P position. The key is locked in all other positions.
Parking position (P) Stationary car with engine running:
Hold your foot on the brake pedal when moving the gear selector to another position.
Electric gear inhibitor Shiftlock Parking position (P position) To be able to move the gear selector from the P position to other gear positions, the ignition key must be in position II and the brake pedal must be depressed.
Shiftlock - Neutral (N position) If the gear selector is in the N position and the car has been stationary for at least three seconds (irrespective of whether the engine is running) then the gear selector is locked in the N position.
NOTE! To be able to move the gear selector from the N position to another gear position, the brake pedal must be depressed and the ignition key must be in position II.
D In th th th
NMU
Starting and driving
Au
Me inh The bet with but
Pre forw
Reverse he car must be stationary when R is elected.
Neutral is the neutral position. No gear is engaged
nd the engine can be started. Apply the arking brake when the car is stationary with e gear selector is in position N.
Drive is the normal driving position. Shifting up
nd down between the different gearbox tios takes place automatically based on the vel of acceleration and speed. The car hould be stationary when the gear lever is oved from position R to position D.
anual positions o move from the automatic driving position to a manual position, move the gear
elector to position M. To go from position M the automatic driving position D, move the
elector to position D.
hile driving he manual gearshift mode can be selected t any time while driving. The engaged gear is cked until you choose another gear.
the gear selector is moved to (minus) the ar changes down a gear and engine brakes t the same time as the accelerator pedal is
tomatic gearbox
chanical gear selector ibitor gear selector can be moved freely
ween N and D. Other positions are locked a latch that is released with the inhibitor
ton on the gear selector.
ss the inhibitor button to move the lever ard or back between R, N and D.
Automatic gear positions P Parking position Select position P when you wish to start the engine or park the car.
NOTE! The brake pedal must be depressed to engage the P position.
The gearbox is mechanically blocked when P position is engaged. Always apply the parking brake when parking the car.
R T s
N N a p th
D D a ra le s m
M T D s to s
W T a lo
If c a
Important! The car must be stationary when the P is selected.
NMV
Starting and driving
rele + (
The com
NO fun
ased. If the gear selector is moved to plus) the car changes up a gear.
selected gear is indicated in the bined instrument panel (see page 38).
TE! Geartronic contains two safety ctions:
Geartronic does not permit downshifting/ kick-down which would result in an engine speed high enough to damage the engine. Nothing happens if the driver tries to shift down in this way. The original gear remains engaged. Geartronic automatically shifts down if the driver allows the speed to decrease lower than a level suitable for the selected gear, in order to avoid jerking and stalling.
W Winter The W button by the gear selector engages and disen- gages thewinter programme W. The symbol W is shown in the combined instrument panel when the winter
programme is activated.
The winter programme starts the gearbox in a higher gear to facilitate starting off on slippery surfaces. The lower gears are only activated with kick-down when the winter programme is engaged.
The W programme can only be selected in position D.
NNM
Starting and driving
Al
All All-
All- wh aut rea clut pai the
Und of p
All- sno
l-wheel drive
-wheel drive AWD wheel drive is always engaged.
wheel drive means that all four road eels are driven at the same time. Power is omatically distributed between front and r wheels. An electronically controlled ch system distributes the power to the r of wheels that grips best. This provides best traction and prevents wheel spin.
er normal driving conditions, the majority ower is transmitted to the front wheels.
wheel drive improves driving safety in rain, w and icy conditions.
NNN
Starting and driving
Br
Br If th eng pre the pre fee the mo bra
NO off, rep
Br
circ bra sof ped bra
sing engine braking more efficiently and quires the foot brake for only brief periods.
ear in mind that driving with a trailer puts an dditional load on the cars brakes.
nti-lock braking system (ABS) The anti-lock braking system (ABS) prevents the wheels from locking up under braking. This means the ability to steer is
aintained and it is easier to swerve to avoid hazard, for example.
fter the engine has been started, the ABS ill perform a brief self-test at a speed of bout 20 km/h. This can be felt and heard as ulses in the brake pedal.
o get the most out of the ABS:
Press brake pedal with full force. Pulses will be felt. Steer the car in the direction of travel. Do not release the pressure on the pedal.
ractice braking with the ABS system in a affic-free area and in different weather onditions.
he ABS symbol lights up:
for about two seconds when the car is started if the ABS is disengaged due to a fault.
ake system
ake servo e car is rolling or is being towed with the ine turned off, the brake pedal must be ssed about five times harder than when engine is running. If the brake pedal is ssed when the engine is started, you will l the pedal drop. This is normal and due to brake servo becoming active. This may be re noticeable if the car has emergency ke assistance (EBA).
TE! If braking with the engine switched press the brake pedal sharply once, not eatedly.
ake circuits This symbol lights if a brake circuit is not working.
If a fault should occur in one of the uits, it is still possible to brake the car. The ke pedal will travel further and may feel ter than normal. Harder pressure on the al is needed to produce the normal king effect.
Dampness can affect braking characteristics Brake components become wet when the car is driven in heavy rain, through pools of water or when the car is washed. This may alter brake pad friction characteristics so that there is a delay before braking effect is noticed.
Press the brake pedal lightly from time to time if driving for long stretches in rain or slushy snow, as well as after setting off in very damp or cold weather. This warms up the braking surfaces and dries off any water. It is also recommended to do this before parking the car for a long period in such weather condi- tions.
If the brakes are used heavily When driving in the Alps or other roads with similar characteristics, the cars brakes are heavily loaded even if the brake pedal is not being depressed especially hard.
Because speed is often low, the brakes are not cooled as effectively as when driving on flat roads at higher speed.
So as not to overload the brakes, shift down when driving downhill instead of using the foot brake. Use the same gear driving downhill as you would use driving uphill. This
u re
B a
A
m a
A w a p
T
P tr c
T
WARNING! The brake servo only works when the engine is running.
NNO
Starting and driving
Br
Em (Em sud pro sen reg dep off sus ped and
If ar oc th ca w ch If th fu Th be
ake system
ergency brake assistance EBA ergency brake assistance) In case of den braking, full-strength braking is vided instantaneously. The EBA function ses when heavy braking is underway by istering how quickly the brake pedal is ressed. Continue braking without easing
on the brake pedal. The function is pended when the pressure on the brake al eases. This function is always active cannot be disengaged.
WARNING! the BRAKE and ABS warning symbols e lit at the same time, a fault may have curred in the brake system. If the level in e brake fluid reservoir is normal, drive refully to the nearest authorised Volvo
orkshop to have the brake system ecked. the brake fluid is under the MIN level in e brake fluid reservoir, do not drive rther before topping up the brake fluid. e reason for the loss of brake fluid must investigated.
NNP
Starting and driving
St
Wh the atio am allo to o
The and dyn (DS
Tra The pow driv spi trac to d pul is w fun can
TC/DSTC button he STC/DSTC button in the centre console used to suppress or reactivate the system. hen the LED in the button is lit, the system active. The LED in the button goes out hen the stability system has been uppressed. Other functions are not ffected.
OTE! To suppress the STC or DSTC nction, the button must be pressed and
eld for at least half a second. The LED in the utton goes out and STC/DSTC SPIN ONTROL OFF appears on the information isplay. The system is automatically activated very time the engine is started.
Fu sy
1
T S A
ability system
en the system is in action, it may seem like car does not respond normally to acceler- n. This is because the system detects the ount of friction on the road surface and ws the different stability system functions perate.
car is either equipped with the stability traction control system (STC) - or the
amic stability and traction control system TC).
ction Control (TC) Traction Control function transfers er from the spinning drive wheel to the
e wheel which has grip by braking the nning drive wheel. To increase forward tion in this situation, it may be necessary epress the accelerator more than usual. A
sing sound is heard when Traction Control orking. This is completely normal. The TC
ction is most active at low speeds. It not be deactivated.
Spin Control (SC) The Stability Control function prevents the drive wheels from slipping during acceler- ation. This improves road safety on slippery surfaces. Under certain conditions, such as when driving with snow chains or in deep snow or sand, it may be beneficial to deactivate the SC function to increase traction. This is done with the STC/DSTC button.
Active Yaw Control (AYC) The Active Yaw Control function automati- cally brakes one or more wheels to stabilise the car in the event of a skid. If the brake pedal were to be depressed in this situation, it would feel more rigid than usual and a pulsing sound would be heard.
The AYC function is always active and cannot be deactivated.
S T is W is w s a
N fu h b C d e
nction/ stem
STC DSTC1
. Option on certain markets.
C X X C X X YC X
NNQ
Starting and driving
St
Sy ins
trac pre
with tem tem
Aut pla retu
ability system
mbols on the combined trument panel
The symbol lights and goes out again after about 2 seconds The symbol is lit for a system check when the car is started.
Flashing warning symbol The SC function is operating to prevent the cars drive wheels from spinning. The TC function is operating to improve the cars
tion. The AYC function is operating to vent skidding.
The information symbol comes on and stays lit TRACTION CONTROL TEMPORARILY OFF is shown in the information display together
the symbol. The TC function has been porarily reduced due to too high brake perature.
omatic reactivation of the function takes ce when the brake temperature has rned to normal.
The information symbol comes on and stays lit ANTI-SKID SERVICE REQUIRED appears on the information display together with the symbol. The STC
or DSTC system has been switched off because of a fault.
Stop the car in a safe place and turn off the engine.
Restart the engine. If the warning symbol remains lit, drive to a
workshop to have the system checked.
WARNING! Suppressing the STC or DSTC system may alter the driving characteristics of the car. Always take care when cornering and driving in slippery conditions.
NNR
Starting and driving
Pa
Par
Ge Par par det
The com beh
The abo dis the spe
activating and reactivating e parking assistance e parking assistance can be deactivated by ssing EXIT on the control panel, see page . "Park Assist deactivated Enter to ivate" will appear on the audio display. The rking assistance can be reactivated by ssing ENTER on the control panel. "Park
sistance active Exit to deactivate" will then pear on the audio display.
nt parking assistance e front parking assistance is active at eds of below 15 km/h, even during
ersing.
e signal comes from the front dspeakers.
ar parking assistance ar parking assistance is activated when erse gear is engaged. If the system is itched off, the text "Park Assist deactivated ter to activate" will appear on the display as n as reverse gear is engaged.
e signal comes from the rear loudspeakers.
ult indicator The information symbol comes on and stays lit PARK ASSIST SERVICE REQUIRED is shown on the infor-
tion display in the centre of the combined trument panel together with the symbol.
1
rking assistance (option)
king assistance front and rear.
neral king assistance is used as an aid to king. A signal indicates the distance to a ected object.
frequency of the signal increases as you e closer to an object1 in front of or ind the car.
tone becomes constant at a distance of ut 30 cm. If there are objects within this
tance both behind and in front1 of the car, signal alternates between front and rear akers.
If the volume of another sound source from the audio system is high, this is automatically lowered.
The system is always active when the car is started and the text message "Park Assist active Exit to deactivate" appears on the audio display.
Front parking assistance The distance covered to the front of the car is about 0.8 m.
Front parking assistance cannot be combined with extra lights because the sensors are affected by the extra lights.
Rear parking assistance The distance covered to the rear of the car is about 1.5 m.
NOTE! The system must be deactivated when driving with a trailer, bike carrier on the towbar or the like as they would trigger the sensors.
Rear parking assistance is deactivated automatically when towing a trailer if a Volvo genuine trailer cable is used.
De th Th pre 63 act pa pre As ap
Fro Th spe rev
Th lou
Re Re rev sw En soo
Th
Fa
ma ins
. Provided that the parking assistance is mounted both front and rear.
WARNING! Parking assistance does not relinquish the drivers own responsibility during parking. The sensors have blind spots where objects cannot be detected. Be aware of children and animals near the car.
NNS
Starting and driving
Pa
Par
Cle The ens with
The sno
rking assistance (option)
king assistance sensors.
aning the sensors sensors must be cleaned regularly to
ure that they work properly. Clean them water and car shampoo.
sensors can react if covered by ice and w.
NNT
Starting and driving
To
Ne sta Jum bat Do
To Fin bef
Au Ma
Do fas
Im B ca
wing and recovery
ver tow the car to bump rt it p start the car with a donor battery if the
tery is flat and the engine does not start. not bump start the car.
wing d out the highest legal speed for towing ore towing the car.
Turn the ignition switch to position II and unlock the steering lock so that the car can be steered, see page 102. The ignition key must remain in position II while the car is being towed. tomatic gearbox: Move the gear selector to position N. nual gearbox: Move gear lever into neutral. Ensure the towrope is always taut to avoid violent jerks. Keep your foot on the brake pedal. not tow cars with an automatic gearbox ter than 80 km/h nor further than 80 km.
Recovery Cars with an automatic gearbox should not, if partly lifted, be towed at more than 80 km/h. They should not be towed further than 80 km.
portant! ump starting the car can damage the talytic converter.
WARNING! The steering lock stays in the position it was in when the power was cut off. The steering lock must be unlocked before towing. The ignition key must be in position II. Never remove the ignition key from the ignition switch while driving or when the car is being towed.
WARNING! The brake servo and power steering do not work when the engine is switched off. The break pedal must be pressed about five times harder than normal, and the steering will be considerable heavier than normal.
NNU
Starting and driving
To
To Use tow atta of t eye
wing and recovery
wing eye the towing eye if the car needs to be
ed on the road. The towing eye is ched in the recess on the right-hand side he front or rear bumper. To fit the towing :
Take out the towing eye. This is stored under the floor hatch in the cargo area. Release the bottom edge of the cover on the bumper with a screwdriver or coin. Screw in the towing eye properly, right up to the flange. Use the wheel wrench to tighten the towing eye. After use, unscrew the towing eye and return it in the cargo area. Refit the cover
Important! The towing eye is only designed for towing on roads, not for pulling the car unstuck or out of a ditch. Call a recovery service for assistance.
NNV
Starting and driving
St
St If th can sep Alw jum spa
Wh ste exp
WARNING! The battery can generate oxyhydrogen gas, which is highly explosive. One spark, which can be generated if you connect the jump leads incorrectly, is sufficient to make the battery explode. The battery contains sulphuric acid, which can cause serious burns. If the acid comes into contact with eyes, skin or clothing, flush with large quantities of water. If acid splashes into the eyes, seek medical attention immediately.
art assistance
arting with a donor battery e battery in the car has become flat, you "borrow" electric current from either a arate battery or the battery in another car. ays make sure the crocodile clips on the p leads are attached securely to eliminate rks during the start attempt.
en jump starting the car, the following ps are recommended to avoid risk of losion:
Turn the ignition key to position 0. Ensure that the other battery is 12 volt. If the donor battery is in another car, switch off the engine in the other car and
ensure that the cars do not touch one another.
Connect the red jump lead between the positive terminal on the donor battery (1+) and the one in your car (2+).
Connect one end of the black jump lead to the donor batterys negative terminal (3).
Connect the other end of the black jump lead to the earthing point (4) by the left- hand strut tower.
Start the engine of the "donor car". Let the engine run a few minutes at a speed slightly higher than idle 1500 rpm.
Start the engine of the car with the flat battery.
Remove the jump leads, first the black and then the red. Ensure that neither end of the black jump lead comes into contact with the batterys positive terminal or the crocodile clip on the red jump lead.
Do not touch the crocodile clips during the start procedure. This could cause sparking.
NOM
Starting and driving
Dr
Ge The sor the hitc the cap of p
If th fac nec
a car with an automatic gea rbox and attached trailer are parked. Always use the parking brake.
railer weights ee page 209 for permitted trailer weights.
OTE! The stated maximum permitted trailer eights are those permitted by Volvo. ational vehicle regulations can further limit ailer weights and speeds. Towbars can be ertified for higher towing weights than the ar can actually tow.
1
WARNING! Follow the stated recommendations for trailer weights. Otherwise, the rig may be difficult to control during evasive manoeuvres and braking.
iving with a trailer
neral load capacity is affected by extra acces-
ies mounted on the car, such as a towbar, load on the towball (75 kg with trailer hed), load carriers and roof box, as well as passengers combined weight. The load acity of the car is reduced by the number assengers and their weight.
e towing bracket is mounted at the Volvo tory, the car is delivered with the essary equipment for driving with a trailer.
The cars towing bracket must be of an approved type. If the towbar is retrofitted, check with your Volvo dealer that the car is fully equipped for driving with a trailer. Distribute the load on the trailer so that the weight on the towing bracket follows the specified maximum towball load. Increase the tyre pressure to the recom- mended pressure for a full load. See page 135 for the location of the tyre pressure label. Clean the towbar regularly and grease the towball1.
Do not tow a heavy trailer when the car is brand new. Wait until it has been driven at least 1000 km.
The brakes are loaded much more than usual on long and steep downhill slopes. Downshift to a lower gear and adjust your speed.
The engine is loaded more heavily than usual when driving with a trailer.
The engine and gearbox can overheat if the car is driven with a heavy load in hot weather. If the temperature gauge for the engines cooling system goes into the red zone, stop and let the engine idle for a few minutes. The gearbox responds through a built-in protection system. See the message on the information display. If the car overheats, the air conditioning may be switched off temporarily.
In the interests of safety, speed should be restricted to 80 km/h, even if the laws of certain countries allow for higher speeds.
The gear selector should be in the parking position P when a car with an automatic gearbox and attached trailer are parked. Always use the parking brake.
Place chocks under the wheels to prevent the car from rolling when parked on a hill with trailer attached. The gear selector should be in the parking position P when
T S
N w N tr c c
. Does not apply to the towball if using a stabiliser hitch.
NON
Starting and driving
Au a t Pa
Sta
Ste
Die dri If th we be cap is t air
tomatic gearbox, driving with railer rking on a hill: Apply the parking brake (handbrake). Move gear selector to the parking position P. rting on a hill:
Move the gear selector to driving position D. Release the parking brake (handbrake). ep inclines:
Select an appropriate manual gear position when climbing steep inclines or at low speeds. This prevents the gearbox from changing up and keeps the gearbox oil cooler. Do not use a higher manual gear than the engine can "handle". It is not always economical to drive in high gears. Avoid driving with a trailer on inclines of more than 15 %. sel engine with manual gearbox,
ving with a trailer e car is driven with a heavy load in hot
ather then the engine cooling fan should replaced with a cooling fan with greater acity than the fan fitted as standard. This
o avoid temporary shut down of the car's conditioning and temporary reduction in
engine torque. Consult your Volvo dealer for information regarding your car's specifications.
NOO
Starting and driving
To
To The reg dam the
If th tow mu
NO afte
B to
If to Fo to Th th C gr
wing equipment
wbars towball must be cleaned and greased
ularly. If a towball hitch with vibration per is used, it is not necessary to grease towball.
e car is equipped with a detachable bar, the towball mounting instructions st be followed carefully, see page 124.
TE! Always take off the towball section r use. Keep it in the cargo area.
Trailer cable An adapter is required if the cars towbar has 13 pin electrics and the trailer has 7 pin electrics. Use an adapter cable approved by Volvo. Make sure the cable does not drag on the ground.
WARNING! e sure to attach the trailers safety cable the correct place.
WARNING! the car is fitted with a Volvo detachable wbar: llow the assembly instructions for the wball section carefully. e towball section must be locked with e key before setting off. heck that the indicator window shows een.
NOP
Starting and driving
Sp Dis Fixe
Det
Ma
ecifications tance A d towbar: 1055 mm
achable towbar: 1055 mm
ximum ball load: 75 kg
Distance B Fixed towbar: 72 mm
Detachable towbar: 72 mm
NOQ
Starting and driving
De
Fit
Check that the indicator window (3) shows red. If the window does not show red, press in (1) and turn the locking wheel anticlockwise (2) until you hear a click.
tachable towbar
ting the towball Remove the guard plug.
Ensure that the mechanism is in the unlocked position by turning the key clockwise.
NOR
Starting and driving
Turn the key anticlockwise to the locked position. Remove the key from the lock.
Insert the towball section until your hear a click.
Check that the indicator window shows green.
NOS
Starting and driving
De
NO sec tow mu with
tachable towbar
TE! Check that the towball section is ure by pulling it up, down and back. If the ball section is not fitted correctly then it st be removed and refitted in accordance
the previous steps.
NOTE! The trailers safety cable must be attached to the attachment on the towbar.
NOT
Starting and driving
Re
Turn the locking wheel down fully, until it comes to a stop. Hold it in this position while pulling the towball rearward and upward.
moving the towball Insert the key and turn it clockwise to the unlocked position.
Push in the locking wheel and turn it anticlockwise until you hear a click.
NOU
Starting and driving
De
tachable towbar
Insert the guard plug.
NOV
Starting and driving
Lo
Ge The sor the hitc the loa num
Lo Sto wh gea out the car and
Pla fron
oad carriers o avoid damaging the car and for maximum ossible safety while driving, it is recom- ended to use load carriers specially esigned for your car by Volvo.
arefully follow the mounting instructions upplied with the carriers.
Check periodically that the load carriers and load are properly secured. Lash the load securely with retaining straps. Distribute the load evenly over the load carriers. Put the heaviest objects at the bottom. The size of the area exposed to the wind, and therefore fuel consumption, increase with the loads size. Drive gently. Avoid quick accelerations, heavy braking and taking curves hard.
Th de ho
WARNING! Load no more than 75 kg on the roof, inclusive of the load carriers and any roof box. The cars centre of gravity and driving characteristics are altered by roof loads.
ading
neral load capacity is affected by extra acces-
ies mounted on the car, such as a towbar, load on the towball (75 kg with trailer hed), load carriers and roof box, as well as passengers combined weight. The cars
d carrying capacity is reduced by the ber of passengers and their weight.
ading the cargo area p the engine and apply the parking brake en loading or unloading long objects. The r lever or gear selector can be knocked of position by long loads, which could set car in motion. To increase the size of the
go area, the head rests can be removed the seats folded down, see page 84.
ce the load firmly against the backrest in t.
The head rests can be removed so that they are not damaged. Put wide loads in the centre.
Heavy objects should be placed as low as possible. Avoid placing heavy loads on a lowered backrest.
Cover sharp edges with something soft to avoid damaging the upholstery.
Secure all loads to the load retaining eyelets with straps or web lashings.
L T p m d
C s
WARNING! e cars driving characteristics change pending on how heavily it is loaded and w the load is distributed.
WARNING! A loose object weighing 20 kg can, in a front-on collision at a speed of 50 km/h, carry the impact of an item weighing 1000 kg.
WARNING! Never load cargo above the backrest. The protection provided by the inflatable curtain in the headlining may be compro- mised or eliminated by high loads. Always secure the load. During heavy braking the load may otherwise shift, causing personal injury.
NPM
Starting and driving
Ad
A. H B. R
Co rig The to a pat
i-Xenon lights
i-Xenon headlamps he headlamp control should be in osition (A) for left-hand traffic and osition (B) for right-hand traffic.
WARNING! On cars with Bi-Xenon headlamps, all work on the lights should be carried out at an authorised Volvo workshop. Bi-Xenon headlamps must be handled with extreme care due to the high-voltage unit.
justing headlamp pattern
eadlamp pattern for left-hand traffic ight-hand traffic
rrect light pattern for left or ht-hand traffic headlamps projection can be adjusted
void dazzling other motorists. The correct tern will also better illuminate the verge.
Halogen lights
Halogen headlamps The headlamp control should be in position (A) for left-hand traffic and position (B) for right-hand traffic.
B
B T p p
NPN
Wheels and tyres General 132 Tyre pressure 135 Changing wheels 136
Warning triangle and spare wheel 137 Removing wheels 139 Emergency puncture repair 141
NPO
Wheels and tyres
Ge
Dr The cha tyre for
Wh sam also wh pre lab
De The Exa 205
Sp The tha diff reg the with
yre age ven if tyres have a theoretical lifespan of up ten years, it is not recommended to drive
n tyres which are more than six years old.
20 55
R 16 91 W
neral
iving characteristics and tyres tyres greatly affect the cars driving
racteristics. The type of tyre, dimensions, pressure and speed rating are important
how the car performs.
en changing tyres, ensure that tyres of the e type and dimensions, and preferably the same make, are fitted to all four
eels. Follow the recommended tyre ssures specified on the tyre pressure el, see page 135.
signation of dimensions dimensions are stated on all car tyres.
mple: /55R16 91 W.
eed ratings car is approved as a whole, which means
t dimensions and speed ratings must not er from those specified on the vehicles istration document. The only exception to se conditions is winter tyres (both those
metal studs and those without). If such a
tyre is chosen, the car must not be driven faster than the speed rating of the tyre (for example, class Q can be driven at a maximum of 160 km/h).
Remember that traffic regulations determine how fast a car can be driven, not the speed class of the tyres.
Note! Maximum permitted speeds indicated.
New tyres Tyres are perishable. After a few years they begin to harden at the same time as the friction capacity/charac- teristics gradually deteri- orate. Therefore aim to get
as fresh tyres as possible when you replace them. This is especially important with regard to winter tyres. The week and year of manufacture are stated with four digits, for example 1502. The tyre in the illustration was manufactured in week 15 of 2002.
T E to o
5 Section width (mm) Ratio between section height and width (%) Radial ply Rim diameter in inches (") Tyre load index (in this case 615 kg) Speed rating (in this case 270 km/h)
Q 160 km/h (used only on winter tyres)
T 190 km/h H 210 km/h V 240 km/h W 270 km/h Y 300 km/h
NPP
Wheels and tyres
Tyr Tre ban sid we rem the tyre grip
Wi Vol cula tyre loc
pace between the brake disks and the heels is too small.
Important! Use Volvo genuine snow chains or equivalent chains designed for the car model, and tyre and rim dimensions. Consult an authorised Volvo workshop
es with tread wear indicators ad wear indicators are narrow treadless ds across the width of the tread. On the
e of the tyre are the letters TWI (tread ar indicator). When only 1.6 mm of tread ains, this band is clearly visible. Change tyres as soon as possible. Remember that s with little tread depth provide very poor in rain and snow.
nter tyres vo recommends winter tyres with parti- r dimensions. These are stated on the pressure label, see page 135 for its
ation. The tyre dimensions are dependent
on the engine variant. When driving on winter tyres, these must be fitted to all four wheels.
NOTE! Ask a Volvo dealer which rim and tyre types are most suitable.
Studded tyres Studded winter tyres should be run in gently for 500-1000 km so the studs settle properly into the tyre. This gives the tyre, and especially the studs, a longer lifespan.
NOTE! The legal provisions for the use of studded tyres vary from country to country.
Tread depth Road conditions with ice, slush and low temperatures place considerably higher demands on tyres than summer conditions. It is therefore not recommended to drive on winter tyres that have a tread depth of less than four millimetres.
Snow chains Snow chains may only be used on the front wheels. This also applies to all-wheel-drive cars.
NOTE! Never drive faster than 50 km/h with snow chains. Avoid driving on bare ground as this wears out both the snow chains and tyres. Never use quick-fit snow chains as the
s w
NPQ
Wheels and tyres
Ge
Sta
Rim On by sor dep ste 85 wre
emporary spare he spare wheel1 is only intended to be used r the short time it takes to get the ordinary heel replaced or repaired. Replace the pare wheel as soon as possible with a ormal wheel. The cars handling may be ltered by the use of the spare wheel.
ever drive faster than 80 km/h with a spare heel on the car.
Im Th 8 nu
1. Certain variants and markets
Important! The car must never be driven fitted with more than one temporary spare wheel.
neral
ndard (1) and bulge acorn (2) wheel nuts
s and wheel nuts ly use rims that are tested and approved Volvo and which are Volvo genuine acces- ies. There are two types of wheel nut, ending on whether the rims are made of
el or aluminium. Tighten the wheel nuts to Nm. Check the torque with a torque nch.
Steel rims standard wheel nuts (1) Steel rims are normally mounted with the standard wheel nuts, but the bulge acorn variety may also be used.
Aluminium rims bulge acorn wheel nuts (2) Only use the bulge acorn variety of nuts with aluminium rims. These differ markedly from other nut types as they have a rotating conical washer.
NOTE! These nuts may also be used with steel rims.
Locking wheel nuts Locking wheel nuts can be used on both aluminium and steel rims. If steel rims with locking nuts are used in combination with wheel covers, the locking wheel nut should be mounted on the bolt nearest the air valve. Otherwise the wheel cover cannot be fitted to the rim.
T T fo w s n a
N w
portant! e wheel nuts should be tightened to
5 Nm. Overtightening can damage the ts and the bolts.
WARNING! Never use standard nuts for aluminium rims. The wheels can come loose.
NPR
Wheels and tyres
Ty
Re The fue sho con
re pressure
commended tyre pressure tyre pressure decal on the inside of the
l filler flap shows what pressure the tyres uld have with different load and speed ditions.
Checking the tyre pressure Check the tyre pressure regularly. The correct tyre pressure is shown in the tyre pressure table. The stated tyre pressures refer to cold tyres. (Cold tyres mean the tyres are the same temperature as the ambient temperature.)
Driving with the wrong tyre pressure adversely affects the cars driving characte- ristics and can increase tyre wear. After just a few kilometres of driving, the tyres warm up and the pressure increases. Therefore air should not be released if the pressure is checked when the tyres are warm. However the pressure should be increased if it is too low.
NPS
Wheels and tyres
Ch
The rota
Su Wh cha sid exa trea in o ma rota lifes bet bet ver car forc
anging wheels
arrow shows the tyres direction of tion.
mmer and winter wheels en summer and winter wheels are nged they should be marked with which
e of the car they were mounted on, for mple L for left and R for right. Tyres with a d pattern which are designed to only turn ne direction have the direction of rotation rked with an arrow. The tyre should always te in the same direction throughout its pan. Tyres should only be switched
ween front and rear positions, never ween left and right-hand sides, or vice sa. If the tyre is mounted incorrectly, the s braking characteristics and capacity to e rain, snow and slush out of the way are
adversely affected. Tyres with the greatest tread depth should always be fitted to the rear of the car (to decrease the risk of skidding).
Wheels should be stored lying down or hanging up, and not standing up.
Contact an authorised Volvo workshop if you are uncertain about tread depth.
NPT
Wheels and tyres
W
Wa The the
Fol war a s
Ens pro
arning triangle and spare wheel
rning triangle warning triangle is fitted on the inside of boot lid attached with two clips.
low the regulations for the use of a ning triangle. Place the warning triangle in
uitable place with regard to the traffic.
Undo the case containing the warning triangle, it is attached with Velcro. Take the warning triangle out of the case. Lower the warning triangles support legs. ure the warning triangle and its case are perly secured in the cargo area after use.
NPU
Wheels and tyres
W
Sp The The cha alw
The fou
Tak
arning triangle and spare wheel
are wheel and jack cars original jack original jack should only be used for
nging wheels. The jacks thread should ays be well greased.
spare wheel, jack and wheel spanner are nd under the floor in the cargo area.
ing out the spare wheel: Fold the rear edge of the floor mat forward. Release the spare wheel and lift it out. Take out the jack and the wheel spanner.
Putting the spare wheel and jack into the cargo area: Wind the jack to halfway (1). The marking
on the plate (2) should line up with the marking on the arm (3) so that the jack can fit lying down in the holder.
Fold in the handle (4) and place the wheel spanner (5) on the jack.
Put the jack back (1) in the hole on the right (6). Fasten the spare wheel (7) in the hole on the left (8).
NPV
Wheels and tyres
Re
Set rep the sur
On each side of the car are two jacking points. Wind down the jacks base so that it sits level on the ground. Check that the jack is seated correctly in the jacking point, as illustrated, and that the base is located directly under it. Jack up the car high enough that the wheel is clear of the ground. Remove the wheel nuts and lift off the wheel.
moving wheels
up the warning triangle if a wheel must be laced at a busy location. Make sure that car and jack are on a firm horizontal
face.
Take out the spare wheel, jack and wheel spanner, which are found under the carpet in the cargo area. Apply the parking brake and engage first gear, or position P if the car has an automatic gearbox. Place chocks in front of and behind the wheels which will remain on the ground. Use heavy wooden blocks or large stones.
Cars with steel rims have removable wheel covers. Prize off the wheel cover with the end of the wheel spanner, or pull it off by hand.
Loosen the wheel nuts -1 turn anticlockwise with the wheel spanner.
NQM
Wheels and tyres
Re
Fit
N on P ra E or th
moving wheels
ting the wheel Clean the contract surfaces on the wheel and hub. Put on the wheel. Tighten the wheel nuts. Lower the car so that the wheel cannot rotate. Tighten the wheel nuts crosswise. It is important that the wheel nuts are tightened properly. Tighten to 85 Nm. Check the torque with a torque spanner. Put on the wheel cover (steel rim).
WARNING! ever crawl under the car when it is raised
the jack. assengers must leave the car when it is ised on the jack. nsure that passengers wait with the car - preferably a crash barrier - between
em and the road.
NQN
Wheels and tyres
Em
Ge Ca inst pun bot adj ele can
Em The inte tha (ma sea tyre
ergency puncture repair
neral rs which do not have a spare wheel are ead equipped with an emergency cture repair kit. This kit can be used to h seal the puncture and to check and ust the tyre pressure. The kit consists of an ctric air compressor and an integrated ister with sealing liquid.
ergency puncture repair kit emergency puncture repair kit is only
nded to work as a temporary repair so t the car can be driven a further 200 km x.) or to the nearest tyre centre. The ling fluid has the ability to effectively seal s which have punctures in the tread.
The canister with the sealing fluid should be replaced before the best-before date has expired or after the emergency repair kit has been used. Puncture repair kit replacement, see page 146 for canister replacement.
NOTE! The emergency puncture repair kit is only intended for sealing tyres with a puncture in the tread.
NQO
Wheels and tyres
Em
The abi the em larg dam
The com floo
12 by t sea ele tyre
Tak rep
ergency puncture repair
emergency puncture repair kit has limited lities to seal tyres which have punctures in wall of the tyre. Do not seal tyres with the ergency puncture repair kit if they have er slits, cracks, irregularities or similar age.
emergency puncture repair kit with pressor and tools are found under the r in the cargo area.
V sockets for the compressor are located he centre console in the front, by the rear t and in the cargo area. Choose the ctrical socket that is nearest the punctured .
ing out the emergency puncture air kit
Fold away the rear edge of the floor mat forward. Lift up the emergency puncture repair kit.
WARNING! The sealing fluid may cause irritation if it comes into direct contact with skin. In the case of contact with skin, wash away the fluid with soap and water.
NQP
Wheels and tyres
Inf Set infla
Objects with a volume of up to 50 litres can be pumped up with the compressor.
WARNING! Inhaling car exhaust fumes can result in danger to life. Never leave the engine running in sealed areas or areas that lack sufficient ventilation.
lating tyres up the warning triangle if a tyre must be ted in an area close to traffic.
Ensure that the orange switch (2) is in position 0 and take out the lead (5) and air hose (4) from the side compartment (3). Screw the air hoses valve connection to the bottom of the thread on the tyres air valve. Connect the lead (5) to one of the cars 12 V sockets. Start the engine. The car must be in a well-ventilated place. Start the compressor by flicking the switch (2) to position I.
Pump up the tyre to the pressure specified on the tyre pressure label.
Turn off the compressor, the switch (2) should be in position 0. Detach the air hose and unplug the lead. Replace the valves dust cap.
Put the lead (5) and air hose (4) into the side compartment (3).
Put the puncture repair kit back under the floor in the cargo area.
The compressor should not run for more than ten minutes at a time. Let it cool afterwards as there is a risk of overheating.
NQQ
Wheels and tyres
Em
Se Set rep the
increase temporarily up to a maximum of 4 bar while the sealing liquid is being pumped in. After about one minute, the pressure will drop and the pressure gauge show a more correct tyre pressure. Pump the tyre to a pressure of between 1.8 bar and 3.5 bar. If the pressure does not reach 1.8 bar after ten minutes of pumping, the compressor should be turned off so it does not overheat. Undo the air hose (4) from the air valve and put the dust cap back on. Unplug the lead (5) from the electrical socket. Fold the orange-coloured part (7) back into its original position and secure the catch (6). Keep the emergency repair kit in a safe place in the car.
ergency puncture repair
aling punctured tyres up the warning triangle if emergency tyre
airs must be carried out in an area where re is other traffic.
Remove the decal (1) regarding the highest permitted speed from the emergency puncture repair kit and stick it on the steering wheel where it can be clearly seen by the driver. Ensure that the orange switch (2) is in position 0 and take out the lead (5) and air hose (4) from the side compartment (3). Screw the air hoses valve connection to the bottom of the thread on the tyres air valve.
Connect the lead (5) to one of the cars 12 V sockets.
Release the safety catch (6) and turn the orange-coloured part (7) 90 degrees to the vertical position, until a click is heard.
Start the engine. The car must be in a well-ventilated place.
Start the compressor by flicking the switch (2) to position I. The pressure may
WARNING! Inhaling car exhaust fumes can result in danger to life. Never leave the engine running in sealed areas or areas that lack sufficient ventilation.
NQR
Wheels and tyres
NO par use
Y af be m (m
Immediately drive about 3 km, at a maximum speed of 80 km/h, to allow the sealing fluid to seal the tyre well.
Check the tyre pressure again: TE! Do not raise the orange-coloured t (7) when only the compressor is to be d for inflation.
Connect the air hose (4) to the air valve on the tyre. Connect the lead (5) to the 12 V power point. Read the pressure on
the compressor. If the tyre pressure is below 1.3 bar, the tyre has not been suffi- ciently well sealed. The journey should not be continued under these circums- tances. Contact a tyre centre.
If the tyre pressure is higher than 1.3 bar, the tyre should be pumped up to the pressure stated on the tyre pressure label, see page 135 for its location. Release pressure with the reduction valve (8) if the tyre pressure is too high.
Turn off the compressor, the switch (2) should be in position 0. Detach the air hose and unplug the lead. Replace the valves dust cap.
Put the lead (5) and air hose (4) into the side compartment (3).
Put the puncture repair kit back under the floor in the cargo area.
The compressor should not run for more than ten minutes at a time. Let it cool afterwards as there is a risk of overheating.
NOTE! The canister with sealant and hose should be replaced after use.
WARNING! Never stand next to the tyre when the compressor is running. Be particularly observant of the tyre walls. If cracks, irregularities or other damage appears, turn off the compressor immediately. Under these circumstances your journey should not continue. Contact an authorised tyre centre.
WARNING! ou should not drive faster than 80 km/h ter the emergency tyre repair kit has en used. The temporarily sealed tyre
ust be changed as soon as possible aximum driving distance: 200 km).
NQS
Wheels and tyres
Em
Ch ca The cha exp has with cha
The rise inst
Check that the seal (7) on the new canister is not damaged. Screw the canister into place. Refit the case (3). Check that the case is correctly fitted. Screw it on with the screws (2). Affix the speed label (4) and new date label (1) to the tyre repair kit.
reat the removed canister as hazardous aste.
hanging the canister and hose after se
Undo the two screws (2) on the orange- coloured case (3).
Im R bo
ergency puncture repair
anging the sealing fluid nister
canister of sealing fluid should be nged before the best-before date has ired, see date label (1), or after the tyre been sealed. After use, the canister (6) holder (8) and air hose (10) should be
nged.
canister can be replaced by an autho- d Volvo workshop or according to the ructions.
Changing the canister before the best-before date has expired Undo the two screws (2) on the orange-
coloured case (3). Remove the speed label (4) and date
label (1), and open the safety catch (5). Loosen the case (3) and take it off.
Unscrew and remove the canister (6).
T w
C u portant!
ead the safety instructions on the ttom of the canister.
WARNING! Ensure the compressor is not connected to the 12 V socket when the canister is changed.
NQT
Wheels and tyres
Ch not can clic
The trea
Remove the speed label (4) and date label (1), and open the safety catch (5). Loosen the case (3) and take it off. Push down the button (8) while turning the canister (6) and the holder (9) clockwise. Remove them. Pull out the air hose (10). Wipe off remaining sealing fluid with a rag or scrape it away if it is has already dried. Fit a new air hose (10). Check that it is fitted correctly. eck that the seal (7) on the new canister is damaged. Screw the holder (9) onto the ister (6) and turn it anticlockwise until a k is heard.
Refit the case (3). Check that the case is correctly fitted. Screw it on with the screws (2). Affix the speed label (4) and new date label (1) to the tyre repair kit.
empty canister and air hose can be ted as normal waste.
NQU
Wheels and tyres
NQV
Car care Cleaning 150 Touching up paintwork 152 Rustproofing 153
NRM
Car care
Cl
Wa Wa Use to c
Re Wa soo che
eaning the upholstery ating spots on fabric pecial cleaning agent, available from your lvo dealer, is recommended for cleaning fabric upholstery. Other chemicals can air the fire retardant qualities of the uphol- ry.
ating spots on vinyl and plastic parts pecial cleaning agent, available from your lvo dealer, is recommended for cleaning rior vinyl and plastic parts. Do not scrape
rub spots. Do not use strong stain overs.
ating spots on leather pecial cleaning agent, available from your lvo dealer, is recommended when cleaning ther upholstery. Treat the leather uphol- ry once or twice a year using Volvos ther care kit. Never use strong solvents. ch products may damage fabric, vinyl and ther upholstery.
mportant! harp objects and Velcro may damage e fabric upholstery.
eaning
shing the car sh the car as soon as it becomes dirty. car shampoo. Dirt and road salt can lead
orrosion.
Do not park the car in direct sunshine. Washing a car with hot paintwork can cause permanent paintwork damage. Wash the car in a carwash with waste water separator. Thoroughly rinse dirt off the underbody of the car. Rinse the entire car to remove loose dirt. When using a pressure washer: Make sure that the nozzle of the pressure washer is not closer than 30 cm to the bodywork. Do not spray directly at the locks. Wash using a sponge, car shampoo and plenty of lukewarm water. If the dirt is difficult to dislodge, wash the car using a cold degreasing agent. Dry the car using a clean, soft chamois or a water scraper. Clean the wiper blades with a lukewarm soap solution or car shampoo. moving bird droppings sh bird droppings off the paintwork as n as possible. Bird droppings contain micals that affect and discolour paintwork
very quickly. This discoloration can only be removed by a specialist.
Automatic carwashes Although an automatic carwash is a quick and easy way to clean the car, it is no substitute for a proper hand wash. The brushes of an automatic carwash cannot reach all parts. We recommend that new cars are washed by hand for the first few months.
Press the brake pedal lightly from time to time if driving for long periods in rain or slush. This heats and dries the brake pads. You should also do this when you begin driving in extremely damp or cold weather.
Cl Tre A s Vo the imp ste
Tre A s Vo inte or rem
Tre A s Vo lea ste lea Su lea
WARNING! Always have the engine cleaned by a workshop. There is a risk of fire if the engine is hot.
WARNING! Always test the brakes after washing the car to ensure that moisture and corrosion do not attack the brake pads and reduce braking performance.
I S th
NRN
Car care
Cle Use spe you dry
Po Pol or t
The is a be wax
Wa beg and wh rem for
Pol liqu the con
aning seatbelts water and a synthetic detergent. A
cial textile cleaning agent is available from Volvo dealer. Make sure the seatbelt is before allowing it to retract.
lishing and waxing ish and wax the car if the paintwork is dull o give the paintwork extra protection.
car does not need to be polished until it t least one year old. However, the car can waxed during this time. Do not polish or
the car in direct sunlight.
sh and dry the car thoroughly before you in polishing or waxing. Clean off asphalt tar stains using Volvo tar remover or
ite spirit. More stubborn marks can be oved using fine rubbing paste designed car paintwork.
ish first with a polish and then wax with id or solid wax. Follow the instructions on packaging carefully. Many preparations tain both polish and wax.
NRO
Car care
To
Pa Pai rus che dam imm pai scr and
Co It is The pro
St Bef be abo
Stir the primer well and apply using a fine brush or matchstick. Apply paint using a brush once the primer is dry. For scratches, proceed as above, but mask around the damaged area to protect the undamaged paintwork. After a few days, polish the touched-up areas. Use a soft rag and a small amount of lapping paste.
uching up paintwork
intwork nt is an important part of the cars tproofing and should therefore be cked regularly. To avoid the onset of rust, aged paintwork must be rectified ediately. The most common types of
ntwork damage are stone chips, atches, and marks on the edges of wings
doors.
lour code important that the correct colour is used. cars colour code is shown on the
duct decal on the B-pillar. See page 208.
one chips and scratches ore touching up paintwork, the car must clean and dry and at a temperature ve 15 C.
Materials Primer in a can Paint in a can or touch-up pen Brush Masking tape Minor stone chips and scratches If the stone chip has not penetrated to the bare metal and there is an undamaged colour coat, you can paint straight after cleaning the damaged area.
If the stone chip has penetrated to the bare metal Stick a piece of masking tape over the
damaged surface. Then remove the tape to remove any loose paint.
NRP
Car care
Ru
Ins You rus are und ant pen into sec
Ma
The req Afte yea trea Vol
stproofing
pection and maintenance r car received a thorough and complete
tproofing at the factory. Parts of the body made of galvanised sheet metal. The erbody is protected by a wear-resistant
i-corrosion compound. And, a thin, etrating rustproofing fluid was sprayed the members, cavities and closed
tions.
intain the cars rustproofing.
Keep the car clean. Hose down the underbody. If using a pressure washer, keep the nozzle at least 30 cm from the painted surfaces. Regularly check and touch-up the rustproofing treatment as necessary.
cars rustproofing does not normally uire treatment for approximately 12 years. r that time, it should be treated at three-
r intervals. If the car needs further tment, please contact an authorised
vo workshop.
NRQ
Car care
NRR
Maintenance and service Volvo service 156 Self-maintenance 157 Bonnet and engine compartment 158
Diesel 159 Oils and fluids 160 Wiper blades 164
Battery 165 Replacing bulbs 167 Fuses 173
NRS
Maintenance and service
Vo
Vo Bef tho in a reg
To pos spe Boo car Vol too hig
Sp Ce car usin dev aut or p ele
olvo Car Corporation will not disclose the tored information without consent. However, olvo Car Corporation may be forced to isclose the information due to national legis- tion. Volvo Car Corporation and its orkshops may also read and use the infor- ation.
dverse driving conditions hange the engine oil and replace the air and il filters more often than recommended in the ervice and Warranty Booklet when driving in dverse conditions.
dverse driving conditions include extended eriods of driving:
in a dusty or sandy environment. towing a caravan or trailer. in mountainous regions. at high speeds. at low speeds or idling. short journeys (less than 10 km) at low temperatures (below 5 C).
Im Fo an an
lvo service
lvo service programme ore the car left the factory, it was roughly test driven. It was checked again ccordance with Volvo Car Corporation ulations before it was handed over to you.
keep your Volvo as safe and reliable as sible, follow the Volvo service programme cified in the Service and Warranty klet. Have an authorised Volvo workshop
ry out service and maintenance work. vo workshops have the personnel, special ls and service literature to guarantee the hest quality of service.
ecial service measures rtain service measures, which affect the s electrical system, can only be performed g electronic equipment specially eloped for your car. Always contact an horised Volvo workshop before beginning erforming service work that affects the
ctrical system.
Installing accessories The incorrect connection and installation of accessories can negatively affect the cars electrical system. Certain accessories only function when the appropriate software has been programmed into the cars electrical system. Always contact an authorised Volvo workshop before installing accessories which are connected to or affect the electrical system.
Recording vehicle data One or more of the computers in your Volvo are capable of recording detailed information. This information is intended for use in research to enhance safety and for diagnosing faults in some of the in-car systems. The data may include details regarding seatbelt use by the driver and passengers, the functions of various vehicle systems and modules, and status information about the engine, throttle, steering, brakes and other systems. This data can also include details of the way the car is driven. This type of information can include, without being limited to, specific details such as vehicle speed, the use of the brake and accelerator pedals and steering wheel position. This latter type of data can be stored for a limited period while the car is being driven and subse- quently during a collision or a near-collision.
V s V d la w m
A C o S a
A p
portant! r the Volvo warranty to apply, check d follow the instructions in the Service d Warranty Booklet.
NRT
Maintenance and service
Se
Be Ba
The cor env dea
H sy is al en D co is
lf-maintenance
fore starting work on the car ttery Check that the battery cables are correctly connected and tightened. Never disconnect the battery when the engine is running (e.g. if replacing the battery). Never use a quick charger to charge the battery. The battery cables must be disconnected when charging the battery.
battery contains acid that is both rosive and toxic. Handle the battery in an ironmentally-suitable way. Let your Volvo ler assist you.
Check regularly Check the following at regular intervals, for example, when refuelling:
Coolant The level must be between the MIN and MAX marks on the expansion tank.
Engine oil The level must be between the MIN and MAX marks.
Power steering fluid The level must be between the MIN and MAX marks.
Washer fluid The reservoir should be well filled. Use washer antifreeze at temperatures around freezing.
Brake and clutch fluid The level must be between the MIN and MAX marks.
WARNING! igh voltage output from the ignition stem. The voltage in the ignition system dangerous. The ignition must therefore ways be switched off for work in the gine compartment.
o not touch the spark plugs or ignition ils when the ignition is on or the engine hot.
WARNING! Bear in mind that the radiator fan may start automatically some time after the engine has been switched off. Always have the engine cleaned by a workshop. There is a risk of fire if the engine is hot.
NRU
Maintenance and service
Bo
Op To
2. Relay and fuse box
3. Air filter1
C w
nnet and engine compartment
ening the bonnet open the bonnet:
Pull the handle on the far left under the dashboard. You will hear when the catch releases. Insert your hand under the centre of the front edge of the bonnet and press the safety catch to the right. Open the bonnet.
Engine compartment 1. Washer fluid reservoir (4 cyl.) 2. Coolant expansion tank 3. Power steering fluid reservoir
4. Engine oil dipstick1
5. Radiator 6. Radiator fan 7. Washer fluid reservoir (5 cyl.) 8. Brake and clutch fluid reservoir
(right-hand drive)
9. Filler orifice for engine oil1
10. Brake and clutch fluid reservoir (left-hand drive)
11. Battery
1
1
WARNING! heck that the bonnet locks properly hen closed.
1. Dependent on engine variant.
NRV
Maintenance and service
Di
Fu Die On com is d pro tem visc risk
The red refu fille pai det
raining condensation from the uel filter he fuel filter separates condensation from e fuel. Condensation can disrupt engine peration.
he fuel filter must be drained at the intervals pecified in the Service and Warranty Booklet r if you suspect that the car has been filled ith contaminated fuel.
esel
el system sel engines are sensitive to contaminants. ly use diesel from a well-known oil pany. Never fill up with diesel if the quality
ubious. The large oil companies also duce a special winter-grade diesel for peratures around freezing. This fuel is less ous at low temperatures and reduces the of wax forming in the fuel system.
risk of condensation in the fuel tank is uced if the tank is kept well filled. When elling, check that the area around the fuel r pipe is clean. Avoid spilling fuel onto the ntwork. Wash off any spillage with ergent and water.
Empty tank No special procedures are required if the tank runs dry.
RME (Rape methyl ester) A maximum of 5 % RME may be mixed with the diesel.
D f T th o
T s o wImportant!
There is a risk of engine damage if the RME concentration is greater than 5 %.
NSM
Maintenance and service
Oi
Dip
Ch en The suit filte driv
Ch oil r
he oil level must be within the area marked n the dipstick.
Important! Always use oil of the recommended grade and correct viscosity. Never use oil additives. These can damage the engine. If the system is topped up with a different oil, contact the nearest authorised Volvo workshop for servicing.
ls and fluids
stick, petrol engines
ecking and changing the gine oil and oil filter Service and Warranty Booklet specifies
able intervals for changing the oil and oil r. Shorter intervals are recommended if ing in adverse conditions. See page 156.
eck the level of engine oil and change the egularly.
Dipstick, diesel engine The oil level in a new car must be checked during the period preceding the first regular oil change. The Service and Warranty Booklet specifies the odometer readings for oil changes. Volvo recommends checking the oil level every 2500 km. The most accurate measurements are made on a cold engine before starting. The measurement will be inaccurate if taken immediately after the engine is switched off. The dipstick will indicate that the level is too low because the oil has not had time to flow down into the oil sump.
NOTE! See the recommended oil grade, viscosity and capacities on page 212.
T o
NSN
Maintenance and service
Ch
Ch
ocation of washer fluid reservoir1
asher fluid, topping up he windscreen and headlamp washers hare a common reservoir.
. Filler cap on 4 cylinder engines and diesel.
. Filler cap on 5 cylinder engines. dd washer antifreeze during the winter so at the fluid does not freeze in the pump, servoir and hoses. See the capacities on age 213.
OTE! Mix the washer antifreeze and water efore filling the reservoir.
1. Dependent on engine variant.
ecking the oil in a cold engine: Wipe the dipstick clean before checking the level. Check the oil level using the dipstick. The oil level must be between the MIN and MAX marks. If the level is close to the MIN mark, start by topping up with 0.5 litres of oil. Top up until the oil level is nearer the MAX than the MIN mark on the dipstick. See page 212 for capacities. ecking the oil in a warm engine: Park the car on a level surface, switch off the engine and wait 10-15 minutes to allow the oil time to run back to the sump. Wipe the dipstick clean before checking the level. Check the oil level using the dipstick. The oil level must be between the MIN and MAX marks. If the level is close to the MIN mark, start by topping up with 0.5 litres of oil. Top up until the oil level is nearer the MAX than
the MIN mark on the dipstick. See page 212 for capacities.
L
W T s
1
2 A th re p
N b
Important! Never fill above the MAX mark. Oil consumption may increase if too much oil is poured into the engine.
WARNING! Do not spill oil onto the hot exhaust manifold due to the risk of fire.
NSO
Maintenance and service
Oi
Ch co Wh inst tha wat con risk and
ecking and topping up the ake and clutch fluid e brake and clutch fluid have a common ervoir1. The fluid level must be between MIN and MAX marks. Check the level ularly. Change the brake fluid every other r or at every other regular service.
e the capacities and recommended fluid de on page page 213.
e fluid should be changed annually on cars ven in conditions requiring hard, frequent
Im Al ag ca wi ap . Location dependent on whether car is
left or right-hand drive.
ls and fluids
ecking and topping up the olant en topping up the coolant, follow the ructions on the packaging. It is important t the mixture of coolant concentrate and er is correct for the prevailing weather ditions. Never top up with water only. The of freezing increases with both too little too much coolant concentrate.
See the capacities on page 213.
Check the coolant regularly The level should lie between the MIN and MAX marks on the expansion tank. If the system is not filled sufficiently, high local temperatures could occur, causing a risk of damage (cracks) to the cylinder head. Top up the coolant when the level falls to the MIN mark.
NOTE! The engine must only be run with a well-filled cooling system. High temperatures can occur, causing a risk of damage (cracks) to the cylinder head.
Ch br Th res the reg yea
Se gra
Th dri
portant! ways use coolant with anti-corrosion ent as recommended by Volvo. New rs are filled with coolant that can thstand temperatures down to proximately -35 C.
WARNING! The coolant may be very hot. If the coolant requires topping up when the engine is at operating temperature, unscrew the expansion tank cap slowly to gently release the overpressure.
1
NSP
Maintenance and service
bra trop
If th fu Th be
king, such as driving in mountains or ical climates with high humidity.
Checking and topping up the power steering fluid Check the level at every service. The fluid does not require changing. The fluid level must be between the MIN and MAX marks.
See the capacities and recommended oil grade on page 213.
If a fault should arise in the power steering system or if the car is without power and must be towed, it can still be steered. However the steering will be much heavier than normal and it will require more effort to turn the wheel.
WARNING! the brake fluid is under the MIN level in e brake fluid reservoir, do not drive rther before topping up the brake fluid. e reason for the loss of brake fluid must investigated.
NSQ
Maintenance and service
W
Ch
NO len lon
iper blades
anging the wiper blades Lift up the wiper arm and position the wiper blade at 90 degrees to the wiper arm. Pull the wiper blade off the shaft, straight out to the side. Fit the new wiper blade (1), at 90 degrees to the wiper arm. Position the wiper blade (2) under the curved metal plate (3) and lower the wiper arm. TE! The wiper blades are different gths. The blade on the drivers side is ger than the blade on the passenger side.
NSR
Maintenance and service
Ba
Ba The influ sta con
For con
The battery contains corrosive acid.
Avoid sparks and naked flames.
Risk of explosion.
ttery
ttery care service life and function of the battery is enced by factors such as the number of
rts, discharging, driving style, driving ditions and climatic conditions.
the battery to function satisfactorily, sider the following:
Regularly check that the battery electrolyte level is correct (A). Check all cells. Use a screwdriver to remove the caps. Each cell has its own maximum level mark. If necessary, top up with distilled water to the batterys maximum mark.
NOTE! Never fill above the maximum mark (A).
Tighten the caps properly. NOTE! The life of the battery is shortened if it becomes discharged repeatedly.
Symbols on the battery These symbols displayed on the battery.
Use protective goggles.
Further information in the owners manual.
Store the battery out of the reach of children.
Important! Always use distilled or deionised water (battery water).
NSS
Maintenance and service
Ba
Ch Re
Fit
ttery
anging the battery moving the battery: Switch off the ignition and remove the key. Unscrew the cover over the battery. Wait at least 5 minutes before touching any electrical terminals. This allows time for the information in the cars electrical system to be stored in the control modules. Remove the lid and unscrew the front wall of the battery box using a screwdriver. Disconnect the negative battery lead. Release the clamp securing the battery. Disconnect the positive battery lead. Remove the battery. ting the battery: Fit the battery into position. Connect the positive lead. Fit the clamp securing the battery. Connect the negative lead. Refit the front wall of the battery box and the lid. Refit the cover over the battery.
WARNING! Batteries can generate oxyhydrogen gas, which is highly explosive. A spark, which can be generated if you connect the jump leads incorrectly, is sufficient to make the battery explode. The battery also contains sulphuric acid, which can cause serious burns. If the acid comes into contact with eyes, skin or clothing, flush with large quantities of water. If acid splashes into the eyes, seek medical advice immediately.
NST
Maintenance and service
Re
Ge All
The sou tab
emoving the lamp housing: Remove the ignition key and turn the light switch to position 0. Withdraw the lamp housings locking pin (1). Pull the lamp housing to the side and then forward (2). Unplug the connector. Lift out the lamp housing and place it on a soft surface to avoid scratching the lens.
itting the lamp housing: Plug in the connector. Refit the lamp housing and fit the locking pin. Check that the pin is correctly inserted. Check the lighting.
he lamp housing must be plugged in and ecured in place before the lighting is turned n or the ignition key inserted into the ignition witch.
Im N fin ar da
placing bulbs
neral bulb specifications are given on page 219.
following list contains bulbs and point- rce lamps that are specialised or unsui- le for changing except at a workshop:
General interior lighting in the roof. Reading lamps. Glovebox lighting. Direction indicators in the door mirrors. Approach lighting in the door mirrors. High-level brake light.
Changing front bulbs All front bulbs (except for fog lamps) are changed by first removing the lamp housing from the engine compartment.
R
F
T s o s
portant! ever touch the bulbs glass with your gers. Grease and oils from your fingers e vaporised by the heat, coating and maging the reflector.
WARNING! On cars with Bi-Xenon headlamps, all work on the lights should be carried out at an authorised Volvo workshop. Bi-Xenon headlamps must be handled with extreme care due to the high-voltage unit.
NSU
Maintenance and service
Re
Dip Rem
ain beam Remove the entire lamp housing. Left-hand headlamp: Turn the bulb holder anticlockwise. Right-hand headlamp: Turn the bulb holder clockwise. Withdraw the bulb holder and change the bulb. Refit the bulb holder. It can only be fitted in one way. Refit the lamp housing.
placing bulbs
ped beam oving the cover and bulb:
Remove the entire lamp housing. Bend aside the catches and remove the cover. Unplug the connector from the bulb. Release the spring clip that secures the bulb. First, press it to the left to release it, then out and down. Pull out the bulb. Refit the lamp housing.
Fitting a new bulb:
Fit the new bulb. It can only be fitted in one position.
Press the spring clip up and then slightly to the right so that it clicks into place.
Press the connector back on. Refit the plastic cover. Refit the lamp housing.
M
NSV
Maintenance and service
Po
ide marker lamps Twist the bulb holder anticlockwise and withdraw it. Change the bulb. Refit the bulb holder. It can only be fitted in one way.
sition/parking lamps Pull out the bulb holder with a pair of pliers. Do not pull out the bulb holder by pulling the electrical cable. Replace the bulb. Press the bulb holder back into place. It can only be fitted in one way.
Direction indicators Twist the bulb holder anticlockwise and
remove it. To remove the bulb from the bulb holder,
press the bulb in and turn it anticlockwise. Fit a new bulb and refit the bulb holder
into the lamp housing.
S
NTM
Maintenance and service
Re
Fo
Press the bulb holder back into place and refit the cover.
placing bulbs
g lamps Switch off all lights and turn the ignition key to position 0. Remove the panel from around the lamp housing. Remove the two Torx screws securing the lamp housing and take out the lamp housing. Unplug the connector from the bulb. Turn the bulb anticlockwise and pull it out. Fit the new bulb and turn it clockwise. Plug in the connector to the bulb. Secure the lamp housing with the screws and press the panel back into place.
Removing the bulb holder All bulbs in the rear lamp cluster can be changed from inside the cargo area.
Switch off all lights and turn the ignition key to position 0.
Remove the covers from the left/right panel to access the bulbs.
These bulbs are located in separate bulb holders.
Unplug the connector from the bulb holder.
Squeeze together the catches and remove the bulb holder.
Replace the bulb. Plug in the connector.
NTN
Maintenance and service
Bul
Lo lig 1. 2. 3. 4. 5. NO FAI afte aut con
ourtesy lighting here is courtesy lighting under the ashboard on the driver and passenger ides.
Insert a screwdriver and gently turn so that the lens detaches. Remove the blown bulb. Fit a new bulb. Refit the lens.
b holder
cation of the bulbs in the rear ht cluster Brake light Position/parking lamps Direction indicator Rear fog lamp (one side) Reversing lamp
TE! If the error message "BULB LURE"/"CHECK STOP LAMP" remains r a faulty lamp has been replaced then an
horised Volvo workshop needs to be sulted to rectify the fault.
Number plate lighting Switch off all lights and turn the ignition
key to position 0. Remove the screw with a screwdriver. Carefully detach the entire lamp housing
and withdraw it. Turn the connector anticlockwise and pull out the bulb.
Replace the bulb. Insert the connector and turn clockwise. Refit the entire lamp housing and screw it
into place.
C T d s
NTO
Maintenance and service
Re
Ca
itting the mirror glass:
First, press the three lugs at top edge of mirror glass back into position. Then press the three lower lugs back into position.
placing bulbs
rgo area Insert a screwdriver and gently turn so that the lamp housing comes loose. Remove the blown bulb. Fit a new bulb.
Vanity mirror lighting Removing the mirror glass:
Insert a screwdriver underneath the lower edge, in the centre. Carefully prise up the lug on the edge.
Insert the screwdriver underneath the edge on the left and right-hand sides (by the black rubber sections). Carefully prise free the lower edge of the glass.
Carefully detach and lift aside the entire mirror glass and cover.
Remove the blown bulb and replace it with a new one.
F
NTP
Maintenance and service
Fu
Ge All ele
The
Ch If a bec
Eac blo Co
he engine compartment positions. Be sure to replace a blown fuse e colour and amperage.
i Fuse" type. "JCASE" type and should be replaced by rkshop. Midi Fuse" type and may only be replaced workshop. are tweezers to assist removing and fitting
ses
neral electrical functions and components are fused to protect the cars ctrical system from damage by short circuiting and overloading.
fuses are in two different locations in the car:
Relay/Fuse box in the engine compartment. Relay/fuse box in the passenger compartment.
anging n electrical component or function does not work, it may be ause the components fuse was temporarily overloaded and blew.
Look in the fuse diagram to locate the fuse. Pull out the fuse and check from the side to see whether the curved wire has blown. If this is the case, replace it with a new fuse of the same colour and amperage. h fuse box has space for several spare fuses. If the same fuse
ws repeatedly it means that there is a fault in the component. ntact an authorised Volvo workshop to have the system checked.
Relay/fuse box in t The fuse box has 36 fuse with a new fuse of the sam
1936 are of the "Min Fuses 718 are of the
an authorised Volvo wo Fuses 16 are of the "
by an authorised Volvo On the inside of the cover fuses.
NTQ
Maintenance and service
Fu
1. 2. 3. 4. 5.
6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
system ................................................. 30 A ................................................................ 30 A ompartment fuse box ........................ 40 A ........................................................................ - ................................................................ 15 A eater, passenger ................................................................ 20 A ................................................................ 15 A (ECM)/ odule (TCM) ....................................... 10 A ................................................................ 20 A ........................................................................ - ................................................................ 15 A ................................................................ 10 A
(CCM) MM) ....................................................... 10 A
ses
Radiator fan................................................................................... 50 A Power steering.............................................................................. 80 A Supply to passenger compartment fuse box......................... 60 A Supply to passenger compartment fuse box......................... 60 A Heating and ventilation unit, Additional heater relay coil (PTC) (only 4 cyl petrol) ........... 80 A Glow plugs (diesel) ..................................................................... 60 A ABS pump..................................................................................... 30 A ABS valves .................................................................................... 20 A Engine control module (ECM) .................................................. 30 A Ventilation fan................................................................................ 40 A Headlamp washers...................................................................... 20 A Supply to heated rear window.................................................. 30 A Starter motor relay....................................................................... 30 A Trailer wiring .................................................................................. 40 A Reserve .................................................................................................. -
16. Supply to infotainment 17. Windscreen wipers ..... 18. Supply to passenger c 19. Reserve .......................... 20. Horn ................................ 21. Fuel-driven additional h
compartment heater.... 22. SUBWOOFER ............ 23. Engine control module
Transmission control m 24. Diesel filter heater........ 25. Reserve .......................... 26. Ignition switch............... 27. A/C compressor........... 28. Climate control module
Multimedia module (M
NTR
Maintenance and service
29. 30. 31. 32.
33.
34.
35.
36.
Fog lamp, front.............................................................................. 15 A Engine control module (ECM) .....................................................3 A Alternator voltage regulator ....................................................... 10 A Injectors (5 cyl), oxygen sensor (4 cyl) intercooler (diesel), air preheater valve (diesel) .................... 10 A Oxygen sensor heater element (5 cyl), vacuum pump (5 cyl)................................................................... 20 A Ignition coils, injectors (1.6 petrol) fuel pump (diesel) pressure switch, climate control (5 cyl) .................................. 10 A Engine sensor valves, A/C relay oil trap PTC element, injectors (1.8 petrol) ............................ 15 A Engine control module (ECM), accelerator pedal position sensor ............................................................................. 10 A
NTS
Maintenance and service
Fu
Re The glo
Ch
ses
lay/fuse box in the passenger compartment fuse box has 50 fuse positions. The fuses are located under the
vebox. The box also provides space for several spare fuses.
anging fuses:
Remove the trim concealing the fuse box by pressing in the pin in the centre of the clips (1) about 1 cm and then withdrawing the clips. Turn the two wing screws (that secure the fuse box) (2) anticlockwise and remove them. Lower the fuse box (3) half way. Pull it towards the seat until it stops. Lower it completely. The fuse box can be unhooked. Close the fuse box in the reverse order. Remove the pins from the centre of the clips. Fit the trim and the clips. Reinsert the pins to expand the clips and secure the trim.
NTT
Maintenance and service
37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50.
coil (PTC), front lights ................................................................... 10 A ......................................................................5 A ................................................................... 10 A module (TCM), ) ............................................................... 10 A le, Keyless control module................. 20 A
trol module.............................................. 10 A ake light switch...................................... 15 A tra lights relay coil ................................ 7.5 A .................................................................. 7.5 A side) ....................................................... 15 A ger side) ................................................. 15 A ................................................................... 20 A oor............................................................ 20 A ......................................................................5 A
Reserve .................................................................................................. - Reserve .................................................................................................. - Reserve .................................................................................................. - Reserve .................................................................................................. - Reserve .................................................................................................. - Reserve .................................................................................................. - Telephone, audio .......................................................................... 15 A SRS system .................................................................................. 10 A Electrical socket, rear seat......................................................... 15 A Passenger compartment, glovebox and courtesy lighting.....5 A Sunroof relay coil, door mirrors....................................................5 A Washer ........................................................................................... 15 A SRS system .................................................................................. 10 A Reserve .................................................................................................. -
51. Auxiliary heater relay parking assistance....
52. ABS system............... 53. Power steering .......... 54. Transmission control
differential gear (DEM 55. Remote control modu 56. Battery charging con 57. Computer system, br 58. Main beam (right), ex 59. Main beam, left .......... 60. Seat heating (drivers 61. Seat heating (passen 62. Sunroof ....................... 63. Supply to rear right d 64. Audio ...........................
NTU
Maintenance and service
Fu
65. 66.
67. 68. 69. 70. 71. 72. 73.
74. 75. 76. 77.
78. 79. 80. 81. 82. 83. 84. 85. 86.
ses
Infotainment system .......................................................................5 A Infotainment control module (ICM), infotainment relay coil10 A Reserve .................................................................................................. - Cruise control ..................................................................................5 A Climate control, rain sensor..........................................................5 A Reserve .................................................................................................. - Reserve .................................................................................................. - Reserve .................................................................................................. - Sunroof, overhead console (OHC) rear seatbelt reminder....................................................................5 A Fuel pump relay ............................................................................ 15 A Reserve .................................................................................................. - Reserve .................................................................................................. - Electrical socket in cargo area, accessory electronic module (AEM) ........................................................... 15 A Reserve .................................................................................................. - Reversing lamp................................................................................5 A Reserve .................................................................................................. - Supply to rear left door............................................................... 20 A Supply to front right door........................................................... 25 A Supply to front left door ............................................................. 25 A Power passenger seat ................................................................ 25 A Power drivers seat ...................................................................... 25 A Interior lighting relay, power seats ..............................................5 A
NTV
Infotainment system Audio and telephone 180 Control panel 181 Audio functions 183
Radio functions 185 CD/MD (option) 190 CD changer (option) 192
Menu settings and options Audio 194 Telephone (option) 196 Telephone functions 198
Menu settings and options Telephone 204
NUM
Infotainment system
Au
Au (op The and sys usin ste dis
The Sur fea duc
The
dio and telephone
dio and telephone system tion) infotainment system integrates the audio telephone functions. The infotainment
tem can be used easily and conveniently g the common control panel and the
ering wheel keypad. The control panel play indicates the present function.
system can be equipped with Dolby round Pro Logic II (certain markets). This ture gives more natural sound repro- tion.
re are three levels of audio system:
Performance: AM/FM radio, CD player, 4x20 W, four full range loudspeakers (or four full range speakers and two tweeters on certain markets). High Performance: AM/FM radio, CD player, 4x40 W, eight loudspeakers (woofer and tweeter in each door). Premium Sound: AM/FM radio, CD player, 4x70 W + 25 W, Dolby Pro Logic II, 12 loudspeaker (woofer, mid-range and tweeter in the front doors, woofer and tweeter in the rear doors, woofer and tweeter in the centre dashboard speaker).
The exact specifications for these levels may vary between markets. Certain levels are not offered on all markets. The options list (sub- woofer, CD/MD player, CD changer, telephone, navigation, etc.) differs between markets. Not all options are available for all levels.
This owners manual describes one way of operating the audio and telephone system. If your car has a keypad in the steering wheel, this can also be used.
NUN
Infotainment system
Co
Co
4. Display Displays options, menus and information
5. Slot for inserting/ejecting 6. Eject CD/MD 7. Station preset buttons/CD changer disc
(1-6), number/character buttons for the telephone, and menu presets
isplay he display shows the function currently in se, for example menu options, messages, lephone numbers or settings. In daylight e information is displayed against a light ackground. In darkness it is displayed gainst a dark background. Clean the display ith a soft, dry cloth. Never use cleaning gent.
his display is also used for the climate ontrol system.
enus ress MENU to access the main menu. The ettings for the active audio system source adio for example) are selected from the ain menu. Audio settings cannot be made if e audio system is not switched on.
sing the menu:
Use the navigation button to scroll up and down in the menu.
ntrol panel
ntrol panel on centre console
Control panel on centre console 1. POWER Audio On/Off 2. PHONE Telephone On/Off/Standby 3. VOLUME Volume control 4. CD/MD Switches between CD and
MD (option) 5. AM/FM Switches between FM1, FM2
and AM 6. MENU Opens the main menu 7. ENTER Selects menu options,
activates a selection or wakes the telephone from standby.
8. EXIT Goes back in the menu, cancels a selection, puts the telephone into standby, and erases the preceding character when entering text and numbers.
9. Navigation button scrolls up/down in the menus, scans/changes tracks/ stations, scroll forward/backward when entering text and digits, and switches between discs in the CD changer
10. TUNING Scan/change tracks or station
11. SOUND Audio settings (e.g. bass, treble and fader)
12. SCAN Automatic station search 13. AUTO Finds and stores the strongest
stations
1
1 1 1
D T u te th b a w a
T c
M P s (r m th
U
NUO
Infotainment system
Co
If th app fea red low
ntrol panel
Press EXIT to cancel, decline an option, or go back one step in the menu structure. Press ENTER to confirm, select or scroll from one submenu to the next submenu. e battery voltage is low, a message ears on the display. The energy saving
ture switches off certain functions or uces the load on the battery, such as by ering the volume of the sound system.
NUP
Infotainment system
Au
Au The pos swi sys off, car
Se Sel and
The dis
Choose between BASS, TREBLE, FADER, BALANCE, SUBWOOFER (option), CENTRE, and SURROUND. Use the TUNING knob to set the level. The display shows a max-min scale. The middle indicates the normal position.
e level for the centre speaker can only be if Dolby Pro Logic II (DPL II ) or 3 channel H) has been selected from the menu. The woofer level can only be set if the woofer is activated.
Audio settings Shown on the
display
ass BASS reble TREBLE alance between
he front and rear peakers
FADER
alance between he left and right- and speakers
BALANCE
evel for ubwoofer
SUBWOOFER (option)
evel for centre oudspeaker certain models)
CENTRE
evel for surround ound (certain odels)
SURROUND
dio functions
dio On/Off ignition switch must at least be in ition I. Press the POWER button to tch the audio system on or off. If the audio tem is active when the ignition is switched it will reactivate automatically when the is restarted.
lecting the sound source ect the sound source with the CD/MD AM/FM buttons.
Press the AM/FM button repeatedly to scroll between FM1, FM2 and AM.
selected sound source is shown on the play.
Volume control Turn the volume knob clockwise or antic- lockwise to raise or lower the volume. The volume can also be controlled using the steering wheel keypad.
The car has a speed-dependent volume feature known as active sound control ASC. This adjusts the volume automatically depending on the speed of the car.
Pause mode When the volume is turned to zero, the CD/MD player switches to pause mode. Reactivate the player by turning up the volume.
Volume control for TP, PTY, news and alarms If a CD is playing when the radio receives a traffic announcement, the CD player enters pause mode. The announcement is played at the volume selected for that type of message. The system then returns to the volume selected for the CD player. If the volume is adjusted while the announcement is broadcast, this new volume is saved and used for the next bulletin.
Audio settings Press SOUND. Press the SOUND button repeatedly until
you reach the function you wish to set.
Th set (3C sub sub
B T B t s B t h L s L l ( L s m
NUQ
Infotainment system
Au
Do (ce Do lou rea
The divi am the
Do MD AM Sur hig
Set
The the 3 c bee Off mo
Use the navigation button or TUNING knob to set the level. Use the navigation button to select the next frequency. Five frequencies can be adjusted. Press ENTER to save any changes and exit. Press EXIT to exit without saving any changes.
dio functions
lby Surround Pro Logic II rtain models)
lby Surround Pro Logic II, with its centre dspeaker in the dashboard, provides more listic sound reproduction.
normal left and right stereo channels are ded into left-centre-right. In addition, bient surround sound is produced through rear loudspeaker channels.
lby Surround Pro Logic II works in CD and modes. 3 channel is recommended for and FM radio broadcasts. Dolby round Pro Logic II is only available for the hest audio level, Premium Sound.
ting the surround sound:
Press MENU. Select the menu for the sound source and press ENTER. Select AUDIO SETTINGS and press ENTER. Select SURROUND AM/FM or SURROUND CD/MD and press ENTER. Select Dolby Pro Logic II, 3 channel or Off and press ENTER. symbol for Dolby Pro Logic II is shown on display if this has been selected. hannel is shown on the display if this has n selected. means the system is in normal stereo
de.
Dolby Surround Pro Logic II and the Dolby icon are trade- marks of Dolby Laboratories Licensing Corporation. The Dolby Pro Logic II Surround
System is manufactured under license from Dolby Laboratories Licensing Corporation.
Subwoofer (option) Gives the system a fuller sound and deeper bass:
Press MENU. Select the menu for the sound source and
press ENTER. Select SUBWOOFER and press ENTER.
A check in the box (on the display) indicates that the subwoofer is activated.
Equalizer, front/rear (certain models) Fine adjustment of the sound from the front speakers:
Press MENU. Select the menu for the sound source and
press ENTER. Select AUDIO SETTINGS and press
ENTER. Select Equalizer front (rear) and press
ENTER.
NUR
Infotainment system
Ra
Tu
Ma The ma
Autostoring appears on the display and a number of strong stations (max. 10) from the selected frequency band are stored in the autostore memory. It there are no stations that are sufficiently strong, No station found appears on the display.
he stations are stored on buttons 0-9. When e radio is in autostore mode, Auto is shown n the display. The text disappears when you turn to the ordinary radio mode. Return to e ordinary radio mode by pressing the AM/ M button or EXIT, or by touching (less than .7 seconds) AUTO.
eturning to autostore mode:
To access the most recently stored stations, touch AUTO and then select a station with buttons 0-9.
canning canning for a station:
Select radio mode with the AM/FM button. Press SCAN. Scan appears on the display. Press SCAN or EXIT to quit.
his function automatically searches for the ext strong AM or FM station signals. When e radio finds a station, scanning pauses for
pproximately 8 seconds, after which it ontinues.
dio functions
ning Select radio mode AM, FM1 or FM2 using the AM/FM button. Press the left or right arrow on the navigation button to search for the next strong station. Press one of the arrows again to initiate a new search.
nual tuning re are two ways to tune into a station
nually.
Turn the TUNING knob to set the desired frequency. Press and hold the left or right arrow on the navigation button. The frequency rolls
slowly in the selected direction and increases speed after a few seconds. Release the button when the desired frequency appears on the display.
If the frequency needs adjusting, touch one of the arrows.
Storing stations To store stations on the preset buttons 0-9:
Set the desired station. Press and hold the button you wish to
store the station on. The sound will be muted for a couple of seconds and Station stored appear on the display.
You can store up to 10 stations each for AM, FM1 and FM2, i.e. a total of 30 stations.
Autostoring stations Automatically tune and store up to ten AM or FM stations in a separate memory. If more than ten stations are found, the ten strongest are selected. This function is particularly useful if you are in an area in which you are unfamiliar with the radio stations and their frequencies.
Select radio mode with the AM/FM button.
Start the search by pressing and holding AUTO (more than 2 seconds).
T th o re th F 0
R
S S
T n th a c
NUS
Infotainment system
Ra
Ra RD net to t irre aud be for Rad rad the bro
NO or o
PI tra PI s rec rad stro PI s unt
Ne Me new sou spe bro
dio functions
dio Data System RDS S is a system that links together specific work transmitters. It is used, for example, une the correct frequency of a station spective of the transmitter or the active io source (e.g. CD). The system can also used for receiving traffic information and finding broadcasts of a specific type. io text is also a component of RDS. A
io station can transmit information about radio programme currently being adcast.
TE! Some radio stations do not use RDS nly use a limited range of its features.
seek (automatic search for nsmitter) eek appears on the display when eption is poor for the selected station. The io automatically searches for the ngest transmission for that station. eek Exit to cancel is shown on the display il the station is found.
ws ssages with a programme code (such as s from RDS stations) will interrupt other nd sources at the volume set for this cific feature. As soon as the news adcast is finished, the audio system
returns to the previous sound source and volume setting.
Activating News Select radio mode with the AM/FM
button. Press MENU. Select the menu for the sound source and
press ENTER. Select News and press ENTER. NEWS appears on the display. Press EXIT if you do not wish to listen to a news broadcast. The News function remains active and the radio waits for the next news programme.
Deactivating Select radio mode with the AM/FM
button. Press MENU. Select the menu for the sound source and
press ENTER. Select News and press ENTER.
NUT
Infotainment system
Int cu
De
Tra Tra rup hea fea aud sou
Act
Select TP from all stations and press ENTER.
search is function allows you to listen to traffic rmation when travelling between different as and countries without selecting a tion.
Press MENU. Select a sound source. Select Advanced radio settings and press ENTER. Select TP and press ENTER. Select TP search and press ENTER. activating lect TP search again and press ENTER.
dio text me RDS stations broadcast information, h as about programme content and
ists. playing text information on the play Press MENU. Select the menu for the sound source and press ENTER (the current sound source is always highlighted when you access the menu if the audio system is on). Select Radio text on the menu and press ENTER. activating lect Radio text again and press ENTER.
erruptions for news from the rrent station Select the radio with the AM/FM button. Activate the station broadcasting the news items. Press MENU. Select Advanced audio settings and press ENTER. Select News station and press ENTER. Select News from current station and press ENTER. activating Press MENU. Select the menu for the sound source and press ENTER. Select Advanced radio settings and press ENTER. Select News and press ENTER. Select News station and press ENTER. Select News from all stations and press ENTER.
ffic information TP station ffic information from RDS stations inter- ts other sound sources. The message is rd at the volume set for this specific ture. As soon as the message ends, the io system returns to the previous sound rce and volume setting.
ivating traffic information Press MENU.
Select the menu for the sound source. Select TP and press ENTER. TP is shown on the display when the function is activated. If the set station does not broadcast traffic information TP))) appears on the display. Press EXIT if you do not wish to listen to the current traffic announcement. The TP function remains active and the radio waits for the next traffic announcement.
Activating traffic information from a specific station Select radio mode with the AM/FM
button. Activate the station from which traffic
information is to be received. Press MENU. Select the menu for the
sound source and press ENTER. Select Advanced radio settings and press
ENTER. Select TP and press ENTER. Select TP Station and press ENTER. Select TP from current station. Deactivating TP station Press MENU. Select the menu for the
sound source and press ENTER. Select Advanced radio settings and press
ENTER. Select TP and press ENTER. Select TP Station and press ENTER.
TP Th info are sta
De Se
Ra So suc art Dis dis
De Se
NUU
Infotainment system
Ra
Ala Ala fun sho me to w dis
Pr Use var
NO des
Pro
Press ENTER for one or more of the listed programme types. The PTY symbol on the display lights up when the first selection is made and the radio is set to standby for PTY. Press EXIT to go back. Select Search PTY and press ENTER. If the radio finds a station with the selected programme type, this is played. he radio does not find a station with the ected programme type, it returns to the vious frequency.
Y mode is then in standby until the ected programme type is broadcast. en this happens, the radio automatically
itches to the station broadcasting the ected programme type.
activating Select Clear all PTY. The PTY symbol disappears from the display and the radio returns to normal mode. Y standby set the radio to PTY standby, perform ps 1-6.
tomatic frequency updating e AF function is normally activated and ures that the radio tunes to the strongest ilable transmitter.
dio functions
rm rms are transmitted automatically. The ction cannot be deactivated. ALARM! is wn on the radio display when an alarm ssage is broadcast. The function is used arn motorists of serious accidents or
asters.
ogramme type PTY the PTY function to select between the
ious programme types.
Press MENU. Select the menu for the sound source and press ENTER. Select PTY and press ENTER. Select Show PTY and press ENTER. The set stations programme PTY will be shown on the display. TE! Not all radio stations have a PTY ignation.
gramme type shown on display Current affairs Information Sport Education Drama Cultures Science Varied speech Pop music
Rock music Easy listening Light classic Serious classic Other music Weather & Metro Finance Childrens progs Social affairs Religion Phone In Travel & Touring Leisure & Hobby Jazz music Country music National music Oldies music Folk music Documentary
Searching for a specific programme type Search through the entire frequency band:
Select FM 1 or FM 2 and press MENU. Select the menu for the sound source and
press ENTER. Select PTY and press ENTER. Scroll to Select PTY and press ENTER.
If t sel pre
PT sel Wh sw sel
De
PT To ste
Au Th ens ava
NUV
Infotainment system
Au
Re
Re The Wh con eve
Act
De
EO (En Wit and pro
tomatic frequency updating Press MENU. Select the menu for the sound source and press ENTER. Select Advanced radio settings and press ENTER. Select AF and press ENTER. activating Select AF and press ENTER.
gional radio programmes regional function is normally deactivated. en the function is activated you can tinue to listen to a regional broadcasts n if the signal is weak.
ivating regional radio programmes Press MENU. Select the menu for the sound source and press ENTER. Select Advanced radio settings and press ENTER. Select Regional and press ENTER. REG is shown on the display. activating Select REG again and press ENTER.
N - Local/Distant/Off hanced Other Networks)
h EON activated, traffic announcements news broadcasts interrupt radio
grammes.
The function has three levels:
Local - Only interrupts if the signal is strong.
Distant - Interrupts even if the signal is weak.
Off - Deactivated. Activating EON Press MENU. Select the menu for the sound source and
press ENTER. Select Advanced radio settings and press
ENTER. Select EON and press ENTER. Select Local, Distant or Off and press
ENTER.
Resetting RDS functions Resets all radio settings to the original factory settings.
Press MENU. Select the menu for the sound source and press ENTER.
Select Advanced radio settings and press ENTER.
Select Reset all and press ENTER. Press ENTER again to confirm.
NVM
Infotainment system
CD
St (op Act CD
CD If th the it h sou rup
Ch Pre but The You ste
can can plays the first ten seconds of each ack.
Press SCAN. Press EXIT to play the current track.
isc text ome CDs have title information. The infor- ation is displayed as text on the display nly applies to the combined CD/MD
layer).
ctivating Disc text Press MENU. Select the menu for the sound source and press ENTER. Select Disc text and press ENTER.
information is stored on the disc, this is hown on the display.
eactivating Select Disc text and press ENTER.
/MD (option)
arting the CD/MD player tion)
ivate the CD/MD player by pressing the /MD button. Insert a disc into the player.
s e quality of the CD does not comply with requirements of standard EN60908 or if
as been recorded using poor equipment, nd quality may be poor or playback inter- ted.
anging tracks ss the left or right arrow on the navigation ton to skip to the previous or next track. track number is shown on the display. can also use the TUNING knob (or
ering wheel keypad).
Fast forward/reverse Press and hold the left or right arrow on the navigation button to search within a track or the whole disc. Searching continues for as long as the button is depressed.
Random This function chooses a CD track in no parti- cular order.
Press MENU. Select the menu for the sound source and press ENTER.
Select Random and press ENTER. RND is shown on the display as long as the function is activated.
Deactivating Select Random again and press ENTER,
or press EXIT.
S S tr
D S m (o p
A
If s
D
Important! Use only standard 12 cm CDs, no mini CDs. Do not use CDs with adhesive disc labels. The heat from the CD player may cause the label to detach from the disc. This could damage the CD player.
NVN
Infotainment system
Eje Pre traf for the pau rea
cting a CD/MD ss the eject button to eject the disc. For fic safety reasons, a CD remains ejected only 12 seconds. The player will then feed disc back into the player and switch to se mode (N/A MD). Press CD/MD to ctivate the player.
NVO
Infotainment system
CD
St Th
Sta
Ma inse
ast forward/reverse ress and hold the left or right arrow on the avigation button to search within a track or e whole disc. Searching continues for as ng as the button is depressed.
andom lays tracks from a CD or CDs in random rder.
Press MENU. Select the menu for the sound source and press ENTER. Select Random and press ENTER. Select Single disc or All discs to play tracks from a single disc or all discs in the CD changer in random order. RND or RND ALL is shown on the display while the function is active. Press the right arrow on the navigation button to select the next random track.
eactivating Press EXIT.
OTE! You can only select the next random ack on the current disc.
can can plays the first ten seconds of each track.
Press SCAN. OTE! Press EXIT to play the current track.
changer (option)
arting the CD changer e CD changer can hold up to six discs.
rting the CD changer:
Press the CD button. Select an empty slot using the buttons 1-6 (or up/down navigation button). The display shows which slots are empty. Insert a CD into the CD changer. ke sure Insert disc is displayed before you rt the disc
CDs If the quality of the CD does not comply with the requirements of standard EN60908 or if it has been recorded using poor equipment, sound quality may be poor or playback inter- rupted.
Selecting discs Select the disc you wish to play using the buttons 1-6 or by pressing the up or down arrow on the navigation button. The number of the disc and track are shown on the display.
Changing tracks Press the left or right arrow on the navigation button to skip to the previous or next track. The track number is shown on the display. You can also use the TUNING knob (or steering wheel keypad).
F P n th lo
R P o
D N tr
S S
N
Important! Use only standard 12 cm CDs, no mini CDs. Do not use CDs with adhesive disc labels. The heat from the CD player may cause the label to detach from the disc. This could damage the CD player.
NVP
Infotainment system
Di Som ma
Act
If in sho
De
Eje Pre eje the pau pla
Eje Pre tha The Eje
sc text e CDs have title information. The infor-
tion is displayed as text on the display.
ivating disc text Press MENU. Select the menu for the sound source and press ENTER. Select Disc text and press ENTER. formation is stored on the disc, this is wn on the display.
activating Select Disc text and press ENTER.
cting single disc ss the eject button. The CD remains cted for only 12 seconds. The changer will n feed the disc back in and switch to se mode. Press CD/MD to reactivate the
yer.
cting all discs ss and hold the eject button (for longer n 2 seconds) to initiate the eject function. entire magazine is emptied, disc by disc.
ct all is shown on the display.
NVQ
Infotainment system
Me
FM 1. 2. 3.
3.
3. 3.
4. 5.
5.
5. 5. 5. 5.
5. 6.
6.
D menu . Random . News (Off1) . TP (Off1) . Audio settings 4.1. Surround AM/FM (certain models)
4.1.1. Dolby Pro Logic II 4.1.2. 3 channel 4.1.3. Off1
4.2. Surround CD/MD (certain models) 4.2.1. Dolby Pro Logic II 4.2.2. 3 channel 4.2.3. Off
4.3. Subwoofer (On1) (option) 4.4. Equalizer front (certain models) 4.5. Equalizer rear (certain models) 4.6. Automatic volume control
4.6.1. Low 4.6.2. Medium 4.6.3. High
4.7. Reset all
nu settings and options Audio
1/FM2 menu News Off/1
TP On/Off1
PTY 1. Select PTY
3.1.1. CLEAR ALL PTY 3.1.2. List of PTY
2. Search PTY 3. Show PTY On/Off
Radio text On/Off1
Advanced radio settings 1. TP
5.1.1. TP station 5.1.2. TP search On/Off1
2. News station 3. AF On1/Off 4. Regional On/Off1
5. EON 5.5.1. Off 5.5.2. Local 5.5.3. Distant1
6. Reset all Audio settings
1. Surround AM/FM (certain models) 6.1.1. Dolby Pro Logic II 6.1.2. 3 channel 6.1.3. Off1
6.2. Surround CD/MD (certain models) 6.2.1. Dolby Pro Logic II 6.2.2. 3 channel 6.2.3. Off
6.3. Subwoofer On1/Off (option) 6.4. Equalizer front (certain models) 6.5. Equalizer rear (certain models) 6.6. Automatic volume control
6.6.1. Low 6.6.2. Medium 6.6.3. High
6.7. Reset all
AM menu 7. Audio settings
7.1. Surround AM/FM (certain models) 7.1.1. Dolby Pro Logic II 7.1.2. 3 channel Off1
7.2. Surround CD/MD (certain models) 7.2.1. Dolby Pro Logic II 7.2.2. 3 channel 7.2.3. Off
7.3. Subwoofer On1/Off (option) 7.4. Equalizer front (certain models) 7.5. Equalizer rear (certain models) 7.6. Automatic volume control
7.6.1. Low 7.6.2. Medium 7.6.3. High
7.7. Reset all
C 1 2 3 4
NVR
Infotainment system
CD 1.
1. 1. 1.
2. 3. 4. 5.
5.
5.
5. 5. 5. 5.
5.
1
changer menu Random
1. Off1
2. Single disc 3. All discs
News (Off1) TP (Off1) Disc text (Off1) Audio settings
1. Surround AM/FM (certain models) 5.1.1. Dolby Pro Logic II 5.1.2. 3 channel 5.1.3. Off1
2. Surround CD/MD (certain models) 5.2.1. Dolby Pro Logic II1
5.2.2. 3 channel 5.2.3. Off
3. Subwoofer (On1) (option) 4. Equalizer front (certain models) 5. Equalizer rear (certain models) 6. Automatic volume control
5.6.1. Low 5.6.2. Medium 5.6.3. High
7. Reset all
CD/MD menu 1. Random 2. News (Off1) 3. TP (Off1) 4. Disc text (Off1) 5. Audio settings
5.1. Surround AM/FM (certain models) 5.1.1. Dolby Pro Logic II 5.1.2. 3 channel 5.1.3. Off1
5.2. Surround CD/MD (accessory) 5.2.1. Dolby Pro Logic II1
5.2.2. 3 channel 5.2.3. Off
5.3. Subwoofer (On1) (option) 5.4. Equalizer front (option) 5.5. Equalizer rear (option) 5.6. Automatic volume control
5.6.1. Low 5.6.2. Medium 5.6.3. High
5.7. Reset all
. Default/Factory setting
NVS
Infotainment system
Te
Tele
lephone (option)
phone system components
NVT
Infotainment system
1. A
The
2. S
The be tele use info pan
3. M
The the
4. C
All con pan me
5. P
6. S
The glo
Ge
ntenna
antenna is mounted on the roof.
teering wheel keypad
majority of the telephone functions can controlled using the keypad. When the phone is active, the keypad can only be d for telephone functions. Telephone rmation is always displayed on the control el when the telephone is activated.
icrophone
hands free microphone is integrated in roof console beside the rearview mirror.
ontrol panel
functions (except call volume) can be trolled using the keypad in the control el. The display shows menu functions,
ssages, telephone numbers, etc.
rivacy handset (option)
IM card
SIM card is located in a holder in the vebox.
neral Always put traffic safety first. If the driver needs to use the privacy handset, park the car in a safe place first. Switch off the telephone system when refuelling the car.
Switch off the system near blasting work. Let only authorised personnel service the
telephone system.
Emergency calls Emergency calls to alarm centres can be made without a SIM card as long as there is coverage by a GSM operator.
Making an emergency call: Activate the telephone. Ring the emergency number that applies
to your region (within EU: 112). Press ENTER.
Loudspeaker The telephone uses the loudspeaker in the drivers door or the audio systems centre speaker (if there is one).
NVU
Infotainment system
Te
SI The SIM car Co exp Inse tele
EI number block the telephone, you must provide
ur network operator with the telephones EI number. This is a 15 digit serial number at is programmed in the phone. To display is number, dial *#06#. Make a note of this mber and keep it in a safe place.
lephone functions
M card telephone can only be used with a valid card (Subscriber Identity Module). The
d is provided by your network operator. ntact your network operator if you erience difficulties with the SIM card. rt the SIM card to start using the phone.
Switch off the telephone. Open the glovebox and the cover for the SIM card holder. Pull out the SIM card holder. Place the card metal side up. Ensure that the bevelled corner of the SIM card matches the bevel of the holder. Carefully press the holder back in.
Double SIM cards Many network operators offer double SIM cards - one for your car and one for another telephone. A double SIM card allows you to have the same number for two different telep- hones. Ask your network operator about the offers available and the use of double SIM cards.
Specifications
IM To yo IM th th nu
Output 2 W
SIM card Small
Memory entries 2551
1. The capacity of the SIM cards memory varies depending on the subscription.
SMS (Short Message Service)
Yes
Data/Fax No
Dualband Yes (900/ 1800)
NVV
Infotainment system
Co
teering wheel keypad . ENTER Accept a call, scroll the menu
or activate the telephone from standby. Press ENTER once to display the last dialled number.
. EXIT Terminate/reject a call, scroll back in the menu, cancel a selection or erase entered digits/characters.
. Volume Increase/decrease call volume during a call.
. Navigation button Scroll up/down in menus, scroll forward/back when entering text and digits.
ntrol panel on centre console
1. PHONE On/Off/Standby. 2. MENU Opens the main menu. 3. ENTER Accept a call, select in the
menu or activate the telephone from standby. Press ENTER once to display the last dialled number.
4. EXIT Terminate/reject a call, scroll back in the menu, cancel a selection or erase entered digits/characters.
5. Navigation button Scroll up or down in the menus, scroll forwards or back when entering text and digits.
6. Display. 7. Number/character keys and menu
option shortcuts. 8. VOLUME Controls the background
volume from the radio, for example, during a call.
S 1
2
3
4
OMM
Infotainment system
Te
Sw Wh sta dis wh will swi the
Act Sw
Sta
Re
Ma To
Rec
enu shortcuts the menu system, you can use numbers
stead of the arrows and ENTER to select a enu at the main menu level. Each menu
election is numbered. The numbers are hown on the display together with the menu ption.
raffic safety or safety reasons, parts of the menu system annot be accessed at speeds in excess of km/h. Only activities started in the menu
ystem can be completed. The speed limiter an be deactivated using menu nction 5.6.1 Menu lock.
DIS ntelligent Driver Information System) The IS system allows incoming telephone calls
nd text (SMS) messages to be delayed so at the driver can concentrate on driving. coming calls and text messages can be elayed by 5 seconds before they are onnected. Missed calls are shown on the isplay. IDIS can be deactivated using menu nction 5.6.2.
lephone functions
itch en the telephone system is active or in ndby mode, a handset is shown on the play. If the cars ignition is switched off ile the telephone system is on, the system be on the next time the ignition is tched on. No calls can be received while telephone system is switched off.
ivating the telephone system Press PHONE. Enter the PIN code and press ENTER. itching off Press and hold the PHONE button to switch off the telephone system. ndby
Press PHONE or EXIT to out the telephone system into standby. activating The system can be reactivated by touching the PHONE button.
king and receiving calls call:
Dial the number and press ENTER on the steering wheel keypad or on the control panel, or lift the handset. eiving a call:
Press ENTER or lift the handset. You can also use Automatic Answer. See menu option 4.3.
The cars audio system can be muted automatically while a telephone conversation is in progress. See menu option 5.5.3.
Volume reduction during telephone call If the telephone rings when the radio is switched on, the volume is lowered when the call is answered. When the call is concluded, the volume returns to the previously set level. It is possible to adjust the radio volume when the telephone is in use and this new volume kept after the call is ended. The audio system can also be muted during a telephone call. See menu 5.5.3. This function only applies to the Volvo integrated telephone system.
Ending a call Press EXIT or hang up the handset. The audio system resumes its previous activity. Reject an incoming call by pressing EXIT.
Standby Calls can be received while the audio system is active and information from an audio system source is shown on the display. The telephone must be in active mode to use the other functions of the telephone system.
M In in m s s o
T F c 8 s c fu
I (I ID a th In d c d fu
OMN
Infotainment system
Pr Ma
The bac
Adj the
To call
Search for the desired name or phone number in the phone book. Press ENTER to select. To make a call, press and hold the desired speed dial button for two seconds or press the button briefly and then press ENTER.
OTE! When the telephone is switched on, it kes a while before speed dialling is
vailable. Menu option 3.4.1 must be ctivated to use the speed dial function.
all waiting two-tone signal during a telephone call dicates that there is another incoming call. he display shows: Answer? eceiving a call:
Press ENTER. Your current call will be put on hold. Select Hold/Resume to finish the call and return to a call on hold.
o reject the incoming call: Press EXIT.
o end the current call: Press EXIT. The nction can be de-selected in the menu.
unctions during a call everal functions are available during a call.
ivacy handset (option) king a call using the handset:
Dial the number using the keypad on the centre console and lift the handset to make the call. Press the handset down before lifting it.
call is ended when the handset is hung k in its cradle.
ust the handset volume using the dial on side of the handset.
switch to handsfree without ending the :
Press the right arrow on the steering wheel keypad (or the menu button on the control panel) and select Handsfree.
Press ENTER and return the handset to its cradle. If the handset is already removed from its cradle at the start of a call, the other party will be audible via the handsfree system. Press the MENU button, scroll to Handset and press ENTER in order to transfer to the handset.
Last dialled number The telephone automatically stores the last telephone numbers/names called.
Calling the last dialled number:
Press ENTER on the steering wheel keypad or control panel (when in active mode).
Use the navigation buttons to scroll forward or back through the last numbers dialled. These are shown on the display.
Press ENTER.
Speed dial A number stored in the phone book can be linked to a speed dial button (1-9).
Select Phone book on the menu and press ENTER.
Scroll to Speed dial, menu 3.4, and press ENTER.
Select which number is to be the speed dial number. Press ENTER to confirm.
N ta a a
C A in T
R
T
T fu
F S
OMO
Infotainment system
Te
Scr EN
Sev wh
Scr EN
opying entries between the SIM card nd Phone book opying from the SIM card to the phone ook:
Press MENU. Select Phone book. Select Copy all. Select From SIM card to phone book and press ENTER.
ou can also copy entries from the phone ook to the SIM card.
rasing names rasing from the phone book:
Press MENU. Select Phone book. Select Search. Enter the first letter of the name (or the entire name) and press ENTER. Scroll to the name you wish to delete and press ENTER. Select Erase to delete the entry.
ntering a name/message ress the button with the relevant character. ress once for the first character, twice for e second character and so on. Press 1 for
pace.
S S
H
H he
P
S S
H he
Th ca
S
P
lephone functions
oll with the navigation button and press TER to make a selection.
eral functions are available during a call ile another call is on hold.
oll with the navigation button and press TER to make a selection.
Call volume Control the call volume during the call by pressing the buttons with the large and small loudspeakers on the steering wheel keypad.
When the telephone is activated, the steering wheel keypad only controls the telephone functions.
The telephone must be in standby mode to control the audio system using the steering wheel keypad.
Phone book Telephone numbers and names can be stored in either the telephone memory or the SIM card memory.
If the number of the person calling is stored in the phone book, the name of the caller will be shown on the display.
The telephone memory can store up to 255 names.
Storing a telephone numbers and name:
Press MENU. Select Phone book and press ENTER. Scroll to Enter item and press ENTER. Enter a name and press ENTER. Enter a number and press ENTER. Select the memory in which the entry is to
be saved an d press ENTER.
C a C b
Y b
E E
E P P th s
ecret mode/ ecret mode off
Secret mode
old/Resume Choose whether the call is to be put on hold or resumed
andsfree/ adset
Use the handsfree function or headset
hone book Show phone book
ecret mode/ ecret mode off
Secret mode
andsfree/ adset
Use the handsfree function or headset
ree-way lling
Conference call (further options)
witch Switch between two calls
hone book Show phone book
OMP
Infotainment system
Qu
1 2 3 4 5 6 7 8 9 *
0 #
EX
itting text input: Erase all entered characters with by pressing and holding EXIT. Return to the menu by again pressing and holding EXIT.
Calling from the memory Press MENU. Scroll downward using the navigation
button (or the left arrow button on the steering wheel to search the phone book).
Press ENTER. Scroll to the desired name using the navigation button or press the first letter of the name (or enter the entire name). Press ENTER.
Press ENTER to dial the selected number.
space 1- ? ! , . : " ' ( ) a b c 2 d e f 3 g h i 4 j k l 5 m n o 6 p q r s 7 t u v 8 w x y z 9 if you enter two letters in a row from the same button, press * between them or wait a few seconds. + 0 @ * # & $ / % switch between upper and lower case
IT Erase the last entered character. If you press and hold this, the entire number or text is deleted.
OMQ
Infotainment system
Me
Te 1.
1. 1. 1. 1.
1.
2. 2. 2. 2.
3. 3. 3. 3.
5.2.5. Franais FR 5.2.6. Italiano 5.2.7. Nederlands 5.2.8. Portugus BR 5.2.9. Portugus P 5.2.10. Suomi 5.2.11. Svenska 5.2.12. Dansk 5.2.13. Deutsch
5.3. SIM security 5.3.1. On 5.3.2. Off 5.3.3. Automatic
5.4. Change codes 5.4.1. PIN code 5.4.2. Telephone code
5.5. Volume 5.5.1. Ringer volume 5.5.2. Ringer tone 5.5.3. Mute radio 5.5.4. Message beep
5.6. Traffic safety 5.6.1. Menu lock 5.6.2. IDIS
.7. Factory settings
nu settings and options Telephone
lephone menu Call log
1. Missed calls 2. Received calls 3. Outgoing calls 4. Erase list
1.4.1. All calls 1.4.2. Missed calls 1.4.3. Received calls 1.4.4. Outgoing calls
5. Call duration 1.5.1. Last call 1.5.2. Number of calls 1.5.3. Total time 1.5.4. Reset time Messages
1. Read 2. Write 3. Message settings
2.3.1. SMSC number 2.3.2. Validity period 2.3.3. Message type Phone book
1. Enter item 2. Search 3. Copy all
3.3.1. SIM to telephone 3.3.2. Telephone to SIM
3.4. Speed dial 3.4.1. Active 3.4.2. Select number
3.5. Empty SIM 3.6. Empty telephone 3.7. Memory status
4. Call options 4.1. Transmit number 4.2. Call waiting 4.3. Automatic answer 4.4. Automatic redial 4.5. Call divert
4.5.1. All calls 4.5.2. When busy 4.5.3. When not answered 4.5.4. If unreachable 4.5.5. Fax calls 4.5.6. Data calls 4.5.7. Cancel all diverts
5. Tel. settings 5.1. Network selection
5.1.1. Automatic 5.1.2. Manual
5.2. Language 5.2.1. English UK 5.2.2. English US 5.2.3. Espaol 5.2.4. Franais CAN
5
OMR
Infotainment system
Me 1. C 1.1 List era
1.2 List era
1.3 List call boo
1.4 Era and
1.4 1.4 1.4 1.4 1.5 Cal
1.5 1.5 1.5 1.5 The call
.3. Copy all opy telephone numbers and names from e SIM card to the telephone memory.
.3.1. From SIM to telephone memory
.3.2. From telephone to SIM memory
.4. Speed dial number stored in the phone book can be
tored as a speed dial number.
.5. Empty SIM elect to erase the entire memory of the SIM ard.
.6. Empty memory rase the entire telephone memory.
.7. Memory status hows how many entries are occupied by ames and numbers in the SIM card and lephone memory. The table shows how any spaces are occupied of the total, .g. 100(250).
. Call options
.1. Transmit number elect whether or not your own number hould be displayed to the person you call. ontact your network operator regarding ex- irectory numbers.
nu options, description all log
. Missed calls of missed calls. You can choose to call,
se or store the number in the phone book.
. Received calls of received calls. You can choose to call,
se or store the number in the phone book.
. Outgoing calls of dialled numbers. You can choose to
, erase or store the number in the phone k.
. Erase list se the lists found in the menus 1.1, 1.2 1.3 as below.
.1. All
.2. Missed
.3. Received
.4. Outgoing
. Call duration l duration of all calls or of the latest call.
.1. Last call
.2. Number of calls
.3. Total time
.4. Reset time telephone code is required to reset the timer (see Menu 5.4).
2. Messages 2.1. Read Received text messages. Select whether to erase, forward, change or save the entire message or parts of it.
2.2. Write Write a message using the keypad. Choose whether to save or send it.
2.3. Message settings Enter the number (SMSC number) of the message centre to which you want your messages transferred as well as how long they are to be saved at the message centre.
2.3.1. SMSC number 2.3.2. Validity period 2.3.3. Message type Contact your network operator for infor- mation about these settings and for an SMSC number. Normally, these settings should not be altered.
3. Phone book 3.1. Enter item Store names and numbers in the phone book. See the section on phone book functions for more information.
3.2. Search Search for a name in the phone book.
3 C th
3 3 3 A s
3 S c
3 E
3 S n te m e
4 4 S s C d
OMS
Infotainment system
Me
4.2 Sel dur inco
4.3 Aut
4.4 Cal
4.5 Ch dive
4.5
4.5 4.5 4.5 4.5 4.5 4.5
5. T 5.1 Ch The in t
5.1 5.1 5.2 Sel
.5.2. Ring tone. There are seven different ring tones.
.5.3. Mute radio: On/Off
.5.4. Message beep
.6. Traffic safety isengage the speed function, i.e. make all enu options accessible while driving.
.6.1. Menu lock
.6.2. IDIS he IDIS function can be deactivated. coming calls will not be delayed, respective of whether the car is being driven r not.
.7. Factory settings eset the systems factory settings.
nu settings and options Telephone
. Call waiting ect whether or not you want to be alerted ing a phone call that there is another ming call.
. Automatic answer omatically answers incoming calls.
. Call back ls a previously engaged number.
. Call divert service oose when and what type of calls are to be rted to a specified telephone number.
.1. All calls (this setting only applies during the call in progress)
.2. When busy
.3. When not answered
.4. If unreachable
.5. Fax calls
.6. Data calls
.7. Cancel all diverts
elephone settings . Network selection oose a network automatically or manually. selected operator is shown in the display
he telephones basic mode.
.1. AUTO
.2. Manual
. Language ect the telephone language.
5.2.1. English UK 5.2.2. English US 5.2.3. Espaol 5.2.4. Franais CAN 5.2.5. Franais FR 5.2.6. Italiano 5.2.7. Nederlands 5.2.8. Portugus BR 5.2.9. Portugus P 5.2.10. Suomi 5.2.11. Svenska 5.2.12. Dansk 5.2.13. Deutsch 5.3. SIM security Select if the PIN code should be on, off or if the telephone should automatically give the PIN code.
5.3.1. On 5.3.2. Off 5.3.3. Automatic 5.4. Change codes Change the PIN code or telephone code 5.4.1 PIN code 5.4.2.Telephone code (use 1234 until you change to your own code). The telephone code is used to reset the call timer. Make a note of your code and save it in a safe place.
5.5. Volume 5.5.1. Volume. Adjust the ring tone
volume.
5
5 5 5 D m
5 5 T In ir o
5 R
OMT
Technical data Type designations 208 Dimensions and weights 209 Engine specifications 210
Capacities 212 Fuel 215 Catalytic converter 217
Electrical system 218
OMU
Technical data
Ty
henever contacting your Volvo dealer and hen ordering spare parts and accessories
or your car, it makes things easier if you now your cars type designation, vehicle dentification number and engine number.
. Type designation, VIN, maximum permitted loads, code number for colour and trim, and type approval number (on right-hand B-pillar).
. Engine type designation, component and serial number (on the right-hand side of the engine).
. VIN (Type and model year designa- tions and chassis number) stamped in the engine compartment underneath the windscreen.
. Gearbox type designation and serial number
(a) manual gearbox (on front side)
(b), (c) automatic gearbox (on the top).
pe designations
W w f k i
1
2
3
4
OMV
Technical data
Di
Di Len
Wi
Wh
Fro
Re
We The tan pas tow hitc etc incl (in we
Trailer with brakes
Maximum trailer weight
Maximum towball load:
1.6 1200 kg 75 kg 1.6D manual 1300 kg 1.8 1300 kg others 1500 kg
Trailer without brakes
Maximum trailer weight
Maximum towball load:
700 kg 50 kg
WARNING! The cars driving characteristics change depending on how heavily it is loaded and how the load is distributed.
mensions and weights
mensions gth: 447 cm
dth: 177 cm
eelbase: 264 cm
nt track: 154-155 cm
ar track: 153-154 cm
ights kerb weight includes the driver, the fuel
k 90 % full and all fluids. The weight of sengers and accessories, such as a bar, towball load (when a trailer is hed, see table), load carriers, and roof box . influence the payload and must not be uded in the kerb weight. Permitted weight addition to driver) = Gross vehicle ightKerb weight.
For the location of the label, see page 208.
1. Max. total weight 2. Max. train weight (car+trailer) 3. Max. front axle load 4. Max. rear axle load Maximum load: See registration document.
Maximum roof load: 75 kg
ONM
Technical data
En
Eng ser pag
.4i
E S4 O 00 ( 000 T 3 ( 400 N B S
S C S E +/-0.1 T
gine specifications
ine type designation, component and ial number can be read on the engine, see e 208.
1.6 1.8 2.4 2
ngine designation B4164S3 B4184S11 B5244S5 B5244 utput (kW/rps) 74/100 92/100 103/83 125/1
hp/rpm) 100/6000 125/6000 140/5000 170/6 orque (Nm/rps) 150/67 165/67 220/67 230/7 kpm/rpm) 15.3/4000 16.8/4000 22.4/4000 23.4/4 o. of cylinders 4 4 5 5 ore (mm) 79 83 83 83 troke (mm) 81,4 83.1 90 90
wept volume (dm3 or litres) 1.60 1.80 2.44 2.44
ompression ratio 11.0:1 10.8:1 10.3:1 10.3:1 park plugs: lectrode gap (mm) 1.2 1.3 3x0.6 +/-0.1 3x0.6 ightening torque (Nm) 15 2 12 30 30
ONN
Technical data
.0D
E 4T21
O ( 000 T 3 ( 2000 N B S
S C 1 S E T
1
T5 1.6D 2.0D 2
ngine designation B5254T3 D4164T D4204T D420 utput (kW/rps) 162/83 81/67 100/67 98/67
hp/rpm) 220/5000 110/4000 136/4000 133/4 orque (Nm/rps) 320/25-80 240/ 320/33 320/3 kpm/rpm) 32.6/1500-4800 24.5/ 32.6/2000 32.6/ o. of cylinders 5 4 4 4 ore (mm) 83 75 85 85 troke (mm) 93.2 88.3 88 88
wept volume (dm3 or litres) 2.52 1.56 2.00 2.00
ompression ratio 9.0:1 18.3:1 18.5:1 18.5: park plugs: lectrode gap (mm) 0.7 +0.1 - - - ightening torque (Nm) 30 - - -
. France
ONO
Technical data
Ca
En
Ext Ch con dea hig abn con Pet cho extr
Vol
oil grade:2 Viscosity3
1.6 SAE 5W-30
1.8
2.4
2.4
T5
1.6
2.0
2.0
1 2 3 .
pacities
gine oil
reme driving conditions eck the oil more often in extreme driving ditions such as alpine driving with a great l of engine braking or motorway driving at
h speed. These conditions may cause ormally high oil temperatures and oil sumption. rol engines: For extreme conditions, ose a fully synthetic engine oil to provide a protection.
vo recommends Castrol oil products.
Engine variant Volume between
MIN MAX Volume1
litres Recommended
B4164S3 0-0.75 4.0 WSS-M2C913-B
B4184S11 0-0.75 4.3
B5244S5 0-1.6 5.8 ACEA A1/B1
i B5244S4
B5254T3
D D4164T 0-1.0 3.7 WSS-M2C913-B
D D4204T 0-2.0 5.5
D D4204T2
. Including filter change.
. Alternative ACEA A5/B5.
. The oil grade requirement must be fulfilled even if a different viscosity is chosen according to the diagram
Important! Always use oil of the recommended grade and correct viscosity. Do not use oil additives. These can damage the engine.
If the system is topped up with a different oil, contact the nearest authorised Volvo workshop for servicing.
ONP
Technical data
Ot
Im Th t mix with any other transmission fluid. If the tr rvicing.
Recommended oil grade G Transmission fluid: WSD-M2C200-C
Transmission fluid: MTF 97309-10
Transmission fluid: JWS 3309 C Coolant with corrosion inhibitor mixed with
water, see packaging. The thermostat starts opening at: 90 C in petrol engines and at 82 C in diesel engines. petrol engine (1.6) 82 C diesel engine (1.6D) 83 C
A Compressor oil PAG Refrigerant R134a (HFC134a)
B DOT 4+ P Power steering fluid: WSS M2C204-A or
equivalent product with same specifica- tions.
her fluids and lubricants
portant! e recommended transmission fluid must be used to prevent damage to the gearbox. Do no
ansmission is topped up with a different fluid, contact an authorised Volvo workshop for se
Fluid Engine variant/number of components Volume earbox oil 1.6 Manual 5 speed 2.1 litres
1.8 Manual 5 speed 1.9 litres 1,6D Manual 5 speed 1.9 litres 2.0D Manual 6 speed 1.7 litres 2.4 Manual 5 speed 2.1 litres 2.4i Manual 5 speed 2.1 litres T5 Manual 6 speed 2.0 litres T5 Automatic gearbox 7.75 litres
oolant 5 cyl. Petrol, manual gearbox 8.0 litres 5 cyl. Petrol, automatic gearbox 8.5 litres 4 cyl. Petrol (1.8) 7.5 litres 4 cyl. Diesel (2.0D) 9.5 litres 4 cyl. Petrol (1.6) 6.2 litres 4 cyl. Diesel (1.6D) 7.2 litres
ir conditioning1 180-200 grams 500-600 grams
rake fluid 0.6 litres ower steering System 1.2 litres
of which reservoir 0.2 litres
ONQ
Technical data
Ca
W se a washer antifreeze recommended by olvo mixed with water at temperatures elow freezing.
F
1 information.
Recommended oil grade
pacities
asher fluid 4 cyl. Petrol/Diesel 4.0 litres U V b
5 cyl. Petrol 6.5 litres
uel tank See page 215
. Weights can vary depending on the engine variant. Contact an authorised Volvo workshop for the exact
Fluid Engine variant/number of components Volume
ONR
Technical data
Fu
Co
Emissions of CO2 (g/km)
Tank volume (litres)
1 171 55 1 172 55 2 199 62
217 2 203 62
217 T 208 62
224 T A
227 58 241
1 129 55
2 148 55 152 145 145
2
1
148 55
el
nsumption, emissions and volume
Engine Gearbox Consumption litre/100 km
.6 B4164S3 Manual 5 speed (IB5) 7.2
.8 B4184S11 Manual 5 speed (MTX75) 7.2
.4 B5244S5 Manual 5 speed (M56) 8.4 Automatic gearbox (AW55-50/51) 9.1
.4i B5244S4 Manual 5 speed (M56) 8.5 Automatic gearbox (AW55-50/51) 9.1
5 B5254T3 Manual 6 speed (M66) 8.7 Automatic gearbox (AW55-50/51) 9.4
5 WD
Manual 6 speed (M66) 9.5 Automatic gearbox (AW55-50/51) 10.1
.6D D4164T (EURO3) (EURO4)
Manual 5 speed (MTX75) 4.9
.0D D4204T (EURO3) Manual 6 speed (MMT6) 5.6 (EURO4) 5.7 (EURO3) Manual 5 speed (M56L2) 5.5 (EURO4) 5.5
.0D D4204T21 (EURO3) (EURO4) (7CV)
. France
Manual 6 speed (MMT6) 5.6
ONS
Technical data
Fu
Fu em Off on with con equ the is d affe hig an
el
el consumption and issions of carbon dioxide
icial fuel consumption figures are based a standard driving cycle in accordance
EU Directive 80/1268 comb. Fuel sumption figures may change if the car is ipped with extra equipment that affects cars weight. The manner in which the car riven and other non-technical factors can ct fuel consumption. Consumption is
her and power output lower for fuel with octane rating of 91 RON.
Petrol Most engines can be run with octane ratings of 91, 95 and 98 RON.
91 RON must not be used in 4 cylinder engines.
95 RON can be used for normal driving. 98 RON is recommended for optimum
performance and minimum fuel consumption.
When driving in temperatures above +38 C, it is recommended to use fuel with the highest possible octane rating for optimum performance and fuel economy.
Petrol: Standard EN 228
Diesel: Standard EN 590
ONT
Technical data
Ca
Ca The pur of e it q cat (ce cha pla me and bei
talytic converter
talytic converter purpose of the catalytic converter is to
ify exhaust gases. It is located in the flow xhaust gasses close to the engine so that
uickly reaches operating temperature. The alytic converter consists of a monolith ramic or metal) with channels. The nnel walls are lined with a thin layer of tinum, rhodium and palladium. These tals act as catalysts, i.e. they participate in
accelerate a chemical reaction without ng used up themselves.
Lambda-sondTM oxygen sensor The Lambda-sond is part of a control system intended to reduce emissions and improve fuel economy.
An oxygen sensor monitors the oxygen content of the exhaust gases leaving the engine. This value is fed into an electronic system that continuously controls the injectors. The ratio of air to fuel is continu- ously adjusted. These adjustments create optimal conditions for efficient combustion, and together with the three-way catalytic converter reduce harmful emissions (hydro- carbons, carbon monoxide and nitrous oxides).
ONU
Technical data
El
Ge 12 nat cha con
* C aud
** D sys
If th bat res on
Alt Ma
St Ou
Ba
Vo
Co
Re
1
ectrical system
neral volt system with a voltage-regulated alter- or. Single pole system in which the ssis and engine block are used as ductors.
ars equipped with High Performance io system.
iesel cars with Premium Sound audio tem, fuel-driven heater, RTI.
e battery is changed, replace it with a tery of the same cold start capacity and erve capacity as the original (see the decal the battery).
ernator x. current = 120/150 A1
arter motor tput = 1.4/1.9 kW1
ttery
ltage 12 V 12 V 12 V
ld start capacity (CCA) 520 A 600 A* 700 A**
serve capacity (RC) 100 min 120 min 150 min
. Dependent on engine variant
ONV
Technical data
Bu
1 2 3 4 5 6 7 li 8 9 1 1 G
lbs
Lighting Output W Socket
. Dipped beam 55 H7
. Bi-Xenon 35 D2S
. Main beam 55 HB3
. Brake lights, reversing lamps, rear fog lamp 21 BA15s
. Direction indicators, front/rear (yellow) 21 BAU 15s
. Rear position/parking lamps, rear side marker lamps 5 BAY15d
. Courtesy lighting, cargo area lighting, number plate ghting
5 SV8.5
. Vanity mirror 1.2 SV5.5
. Front position/parking lamps, front side marker lamps 5 W 2.1 x 9.5d 0. Direction indicators in door mirrors (yellow) 5 W 2.1 x 9.5d 1. Fog lamps 55 H11 lovebox lighting 3 BA9
OOM
Technical data
OON
A A/C AB Add Air Air Air Air Airb Airb Airb insp Ala Ala Ala All- Alte App Aut
B Bac Bac Bat Bird Bon Boo Boo Bra Bra
efroster ..........................................................69 iesel particle filter ..................................... 102 imensions ................................................... 209 ipped beam ............................................... 168 irection indicators ............................ 47, 169 isplay ..............................................................43 oor mirrors ....................................................59 rivers door control panel ..........................12 STC ..................................................... 44, 113
CC ..................................................................67 conomical driving ..................................... 100 lectrical socket in the centre console .....44 lectrical system ......................................... 218 missions ..................................................... 215 ngine compartment .................................. 158 ngine oil ............................................160, 212 ngine specifications ................................. 210 nvironment ...................................................... 3 nvironmental philosophy .............................. 3 xpectant mothers .........................................15
an, A/C ...........................................................68 an, ECC .........................................................70 loor mats ........................................................83 luids ............................................................. 213
....................................................................68 S ................................................................ 111 itional heater ............................................76
conditioning ..............................................66 distribution ................................................73 distribution, A/C .......................................69 quality system, ECC ................................71 ag, drivers side .......................................17 ag, passenger side .................................17 ags and inflatable curtains, ection ........................................................29
rm .........................................................96, 97 rm signals ...................................................97 rm system, test .........................................98 wheel drive ............................................. 110 rnator ...................................................... 218 roach lighting ..........................................60
omatic carwashes ................................ 150
krest, front seat .......................................78 krests, rear ...............................................84 tery ............................100, 119, 165, 218
droppings ............................................. 150 net ........................................................... 158 ster cushion, integrated ........................33 t lid .......................................................... 100
ke fluid ..................................................... 162 ke system ............................................... 111
Bulb holder ...................................................170
C Car care .........................................................149 Car upholstery ..............................................150 Carbon dioxide .............................................216 Cargo area ................................. 86, 129, 172 Catalytic converter ......................................217 Child safety ..................................................... 30 Child safety locks .......................................... 95 Child seat, fitting ........................................... 35 Child seats and airbags ............................... 30 Child seats and side airbags ...................... 22 Children in the car, placement ................... 32 Cigarette lighter ............................................. 44 Clean inside and out ........................................3 Cleaning, Car washing ...............................150 Clutch fluid ....................................................162 Cold start ......................................................107 Collision sensors ........................................... 24 Colour code ..................................................152 Combined instrument panel ........................ 38 Compass, calibrating .................................... 58 Condensation ...............................................159 Coolant ..........................................................162 Cooling system ............................................100 Courtesy lighting .........................................171 Crash mode .................................................... 28 Cruise control ................................................. 51
D D D D D D D D D D
E E E E E E E E E E E E
F F F F F
OOO
Fog Fue Fue Fue Fue Fus
G Ge Ge Glo Gro
H Han Haz He He He He He He He He He Ho
gnetic zones ..............................................59 in beam .................................................... 168 intenance ................................................. 155 ssages ........................................................43
mber plate lighting ................................ 171
filter .......................................................... 160 grade ....................................................... 212
COS ............................................................20 int ............................................................... 152 intwork damage ...................................... 152 nel vents ......................................................66 rking .......................................................... 115 rking brake ..................................................54 rking heater ................................................74 rking heater, battery and fuel ..................75 rking heater, parking .................................75 rking lamps .............................................. 169 ssenger compartment filter .....................66 trol grade ................................................. 216 ch protection, sunroof .............................62 lishing ....................................................... 151 sition lamps ..................................... 45, 169
lamps ............................................. 45, 170 l consumption .............................215, 216 l consumption, current ...........................48 l filler flap ........................................ 45, 101 l system .................................................. 159 es ............................................................. 173
arbox, automatic .................................... 107 arbox, manual ......................................... 105 vebox ..................................................83, 94 ss vehicle weight ................................. 209
dbrake .......................................................54 ard warning flashers ...............................53
ad restraints ...............................................84 adlamp dipper ...........................................47 adlamp levelling ........................................45 adlamp pattern ....................................... 130 adlamp washer ..........................................49 adlamps ......................................................45 ated front seats .........................................69 ated rear window ......................................69 ated rearview and door mirrors .............69 me safe lighting ........................................60
I Ignition keys ..................................................103 Ignition system ............................................... 91 Immobiliser ............................................88, 103 Indicator symbols .................................. 39, 40 Inflatable curtains .......................................... 24 Information display ........................................ 43 Instrument lighting ......................................... 45 Instrument overview, left-hand drive ............8 Instrument overview, right-hand drive ....... 10 Integrated booster cushion ......................... 33 Interior .............................................................. 77 Interior lighting ............................................... 80
K Kerb weight ..................................................209 Key .................................................................... 88 Key blade ........................................................ 88 Keyless drive .................................................. 91 Keys .................................................................. 88 Kick-down .....................................................107
L Lambda-sond ...............................................217 Lighting ..........................................................167 Lighting panel ................................................. 45 Loading ..........................................................129 Locking ............................................................ 93 Locks ........................................................ 87, 91 Lubricants .....................................................213
M Ma Ma Ma Me
N Nu
O Oil Oil
P PA Pa Pa Pa Pa Pa Pa Pa Pa Pa Pa Pe Pin Po Po
OOP
Pow Pow Pun
R Rai Rea Rea Rea Rec Rec Rec Ref Ref Rel Rem Rem Rev Rev Rim RM Rus
S Scr Sea Sea Sea Sea Sea
railer weight ............................................... 209 rip computer .................................................47 ype designation ......................................... 208 yre pressure ............................................... 135 yres, designation of dimensions ............ 132 yres, direction of rotation ........................ 136 yres, driving characteristics .................... 132 yres, speed ratings ................................... 132 yres, tread wear indicators ..................... 133
nlocking .........................................................93
anity mirror ................................................. 172 ehicle data ................................................. 156 iscosity ........................................................ 212
arning symbol, AIRBAG system .............18 arning symbols ...................................39, 40 arning triangle ......................................... 137 asher fluid ................................................. 161 ashing the car .......................................... 150 axing .......................................................... 151 eights ........................................................ 209 heel nuts ................................................... 134 heels, fitting ............................................. 140 hiplash injury ...............................................25
er steering fluid ................................... 163 er windows ..............................................55 cture repair kit ...................................... 141
n sensor .....................................................50 r fog lamp .................................................46 rview mirror ..............................................58 rview mirror with compass ....................58 irculation, A/C .........................................68 irculation, ECC ........................................71 overy ....................................................... 117 rigerant .......................................................66 uelling ...................................................... 101 ay/fuse box ...................................173, 176
ote control ...............................................88 ote control functions .............................88
erse gear inhibitor ................................ 106 erse gear inhibitor, five-speed .......... 105 s ............................................................... 134 E ............................................................... 159 tproofing ................................................ 153
atches ..................................................... 152 t, power seat ............................................79 t, seating position ...................................78 tbelt reminder ..........................................15 tbelt tensioner .........................................16 tbelts ............................................... 14, 151
Service programme ....................................156 Side airbags ................................................... 22 Side marker lamps ......................................169 SIPS bag system ........................................... 23 Slippery driving conditions ........................100 Spots ..............................................................150 SRS system .................................................... 19 SRS, switch .................................................... 21 Stability system ......................... 44, 113, 114 Start assistance ...........................................119 Starter motor ................................................218 STC ........................................................44, 113 Steering lock ................................................103 Steering wheel adjustment ......................... 53 Stone chips ..................................................152 Storage spaces ............................................. 82 Sunroof ............................................................ 61 Sunscreen, sunroof ....................................... 62 Switches in the centre console .................. 44 Symbols .........................................................114
T Tank volume ..................................................215 Temperature selector, ECC ........................ 72 Temperature, A/C .......................................... 69 Timer, A/C ....................................................... 69 Timer, ECC ..................................................... 71 Towbar ................................................ 122, 124 Towing ...........................................................117 Trailer .............................................................120
T T T T T T T T T
U U
V V V V
W W W W W W W W W W W
OOQ
WH WH Win Win Win Wip
IPS .............................................................25 IPS and child seat/booster cushion ...25 dscreen washer ......................................49 dscreen wipers .......................................49 ter tyres .................................................. 133 er blades ............................................... 164
2005
S40 VOLVO
2 0
0 5
6968TP
O W
N E
R 'S
M A
N U
A L
V O
LV O
S 4
<Related manuals for Volvo S40 2005 Owners Manual
en
en
en
en
en
en
en
en
Manualsnet FAQs
If you want to find out how the S40 Volvo works, you can view and download the Volvo S40 2005 Owners Manual on the Manualsnet website.
Yes, we have the Owner's Manual for Volvo S40 as well as other Volvo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a Volvo S40. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Volvo S40 2005 Owners Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Volvo S40 2005 Owners Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Volvo S40 2005 Owners Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Volvo S40 2005 Owners Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Volvo S40 2005 Owners Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.