Volvo S80 Sensus Infotainment 2013 Instruction Manual PDF

1 of 8
1 of 8

Summary of Content for Volvo S80 Sensus Infotainment 2013 Instruction Manual PDF

Infotainment guide

WELCOME TO SENSUS INFOTAINMENT The purpose of this supplement is to provide a brief overview of the

most common Sensus Infotainment functions and to help you get the most from this sophisticated, feature-rich system.

The specifications, design features and illustrations in this supplement are not binding. Volvo Car Corporation reserves the right

to make modifications without prior notice.

An asterisk (*) indicates optional equipment.

Volvo Car Corporation

sensus Web edition

Sensus Infotainment provides a coordinated interface for operating a number of functions that can be reached through the buttons on the centre console. 1 SOUND press to access the menu for sound

settings (bass, treble, etc.). Press repeatedly to come to the setting of your choice.

2 VOL turn to raise or lower the volume.

3 (On/Off) - Press briefly to start Sensus Infotainment. - Press and hold (until the screen turns black) to switch the system off. - Press briefly to mute the systems sound and press briefly again to return the sound. The entire Sensus Infotainment system, includ- ing the navigation* and telephone* functions, is switched on/off at the same time by using this button.

4 Mode buttons - Select a mode (e.g., RADIO, MEDIA, TEL*, etc.) by pressing its button on the centre console. The most recent source in the selected mode (e.g., FM1) will be displayed. The location of these buttons on the centre con- sole may vary slightly from model to model.

5 OK/MENU confirm a menu selection. This leads to the selected modes (RADIO or MEDIA) menu view. Arrows at the right of the screen indicate submenus.

6 TUNE turn to scroll amongst tracks/folders, radio and TV* stations, phone contacts or to navigate amongst the alternatives shown on the screen.

7 EXIT go upwards in the menu system, cancel a current function, reject an incoming phone call or erase characters that have been entered on the screen. From a modes main view, press and hold to come to the Sensus Infotainment main menu.

8 # INFO - If more information is available than is currently displayed on the screen, press # INFO to display the remaining information.

Keypad - for storing presets or entering num- bers/letters.

SEnSuS InfOtAInMEnt - IntRODuctIOn

* FAV - used to store frequently used functions, making it possible to start the stored function by simply pressing this button. See the exam- ple under SEnSuS InfOtAInMEnt - nAvIgA- tIOn MODE.

STEErINg WhEEL kEyPAd (WITh A ThUMb WhEEL*)

The buttons on the right-hand steering wheel keypad can be used in the same way as some of the controls on the centre console.

5 thumb wheel (press): functions in the same way as OK/MENU on the centre console.

6 thumb wheel (turn): functions in the same way as TUNE on the centre console.

7 EXIt: functions in the same way as EXIT on the centre console.

nOtE

In the remainder of this supplement, the thumb wheel (on certain steering wheel keypads only) will be referred to as the thumb wheel and the OK/MENU button on the centre console will be referred to as Ok.

For more detailed information about the various Sensus Infotainment features, please consult your owners manual.

1 Mode button (the number of buttons varies, depending on the cars level of instrumentation).

2 normal view 3 Shortcut view 4 Quick scroll view 5 Menu view

navigating in a modes views

Each mode has four different screen views (the various views for MEDIA are shown in the example above).

normal view (2) the modes normal view.

Shortcut view (3) shows the most common alternatives for the modes RADIO, MEDIA, TEL* and NAV* (press the active modes button (1) to display this view).

Quick scroll view (4) turn the thumb wheel or TUNE to display e.g., a list of radio stations/ tracks on a disc, etc.

Menu view (5) when in normal view, press the thumb wheel or Ok to display available settings.

SENSUS INFOTAINMENT MAIN VIEW

Selecting a mode from the steering wheel keypad

From a modes normal view, pressing and holding EXIT will display the Sensus Infotainment main view, which enables you to select a mode.

Scroll in the Sensus Infotainment main view by turning the thumb wheel and press it to display the selected modes shortcut view.

This view shows:

nAv* - Volvos navigation system (rTI)

RADIO - AM, FM, SAT*/dAb*

MEDIA - Cd, dVd*, AUX, AV/AUX*, USb*, blue- tooth*, TV*

tEL* - bluetooth handsfree

MY cAR - car settings

cAM* - rear park assist camera

Options that are not installed in the car will not be displayed on this list.

SEnSuS InfOtAInMEnt - IntRODuctIOn

SEnSuS InfOtAInMEnt - RADIO MODE

rAdIO MOdES NOrMAL VIEW

If you are not already in this modes normal view, press RADIO on the centre console. This takes you directly to radio modes normal view and the most recently tuned station will be displayed and played.

From here, turn the thumb wheel or TUNE to display and scroll in a list of radio stations available in the cars current location. Select a station and confirm by pressing OK.

From radio modes normal view, press RADIO to dis- play the source menu (AM, FM1, FM2, and any other options that may be installed in your car - see the illustration in the right-hand column). Scroll with the thumb wheel or TUNE and press the thumb wheel or OK to select.

STOrINg PrESET STATIONS

Ten preset stations can be stored for each waveband (AM, FM1, etc.).

Stored preset stations are selected using the keypad buttons on the centre console.

To store a station, tune to the desired station manu- ally (see above) or by using the ScAn function. To do so from normal view:

1. Press OK to display the currently selected wave- bands menu.

2. Scroll to SCAN and pressthe thumb wheel or OK. The radio will begin scanning for the strongest stations in the area. When a station is found, it will be played for several seconds before scanning resumes.

3. To store the station, press one of the number keys on the centre console until the sound is muted. release the button. When the sound returns, the station has been stored.

Storing a station (or pressing EXIT) interrupts the ScAn function.

SEnSuS InfOtAInMEnt - tEL*/bLuEtOOth MODE

TEL*/bLUETOOTh MOdE

If you are not already in this modes normal view, press TEL* on the centre console to access all of the telephone features and to use bluetooth to pair bluetooth-enabled phones or other external devices.

PAIrINg A bLUETOOTh dEVICE WITh SENSUS INFOTAINMENT

Method 1 Search for the external device using the Sensus Infotainment menus (this example assumes that there are no devices connected).

1. be sure that the external device is discoverable (that its bluetooth function is activated) and fol- low the instructions on the Sensus Infotainment screen.

2. Press the thumb wheel or OK and follow the direc- tions displayed on the Sensus Infotainment screen.

The external device is now paired to Sensus Infotain- ment.

If this procedure has not functioned, press EXIT twice and continue to method 2.

Method 2 Search for the car using the external devices blue- tooth function.

1. Make the car discoverable by scrolling to Phone settings and pressing the thumb wheel or OK. Discoverable will be displayed. Press the thumb wheel or OK.

2. Select My Volvo Car on the external devices screen and follow the directions provided.

3. Enter a PIN code of your choice in the external device and press its button to pair the device. Press the thumb wheel or OK and enter the same PIN code in the car using the centre console keypad.

The external devices name will displayed on the cars screen and it is now paired to Sensus Infotainment.

ShOrTCUT VIEW (COMMON PhONE FUNC- TIONS)

From telephone modes normal view, press TEL* again to display the shortcut menu. Scroll to the desired alternative and press the thumb wheel or OK. Press EXIT to return to telephone modes normal view.

QUICk ACCESS TO ThE CONNECTEd PhONES LIST OF CONTACTS (PhONE bOOk)

1. If you are not already in tEL* mode, press TEL to enter telephone modes normal view.

2. Turn the thumb wheel or TUNE to display the list of contacts. Continue turning to scroll through the list.

Press the thumb wheel or OK to select a contact. If there is only one phone number for this contact, a call will be initiated. If there are several phone numbers, scroll to the desired one and press the thumb wheel or OK to initiate a call.

ChANgINg PhONES (Or OThEr dEVICES)

Two bluetooth devices (e.g., a phone and an iPod) can be active at the same. however, two phones can- not be used at the same time to make calls. To change the currently connected phone:

1. Press TEL* to enter telephone modes normal view.

2. Press TEL* again to display the shortcut menu.

3. Scroll to Change phone and press the thumb wheel or OK.

4. Scroll to the desired phone and press the thumb wheel or OK to select it. This phone can now be used to make or receive calls, etc.

you will then be returned to the telephone modes normal view.

SEnSuS InfOtAInMEnt - MEDIA MODE

If you are not already in this modes normal view, press MEDIA on the centre console to play a Cd or to listen to an external device. The following is an example of how you can connect an iPod.

CONNECTINg ANd USINg AN IPOd

An iPod (or other external device) can be connected using a USb cable or through the bluetooth function (see the section PAIrINg A bLUETOOTh dEVICE WITh SENSUS INFOTAINMENT in the section Sen- sus Infotainment - TEL*/bluetooth mode).

The following is an example of the method for con- necting an iPod as a sound source:

1. Press MEDIA in the centre console to enter media mode. If the iPod was the most recently used sound source, the most recent track will automatically resume playing.

2. If the iPod was not the most recently used sound source, press MEDIA to display the shortcut view.

3. Scroll to iPod and press the thumb wheel or OK. If the iPod has been used before, the most recently played track will resume.

An iPod connected through the USb socket will also be charged while it is playing.

When the iPod is initially connected, Reading iPod will be displayed.

To change tracks/artist/folder, etc. from the currently playing track:

1. Turn the thumb wheel or TUNE.

2. Press EXIT repeatedly until you have reached the menu of your choice. Press the thumb wheel or OK to confirm your choice.

When an iPod is used as a sound source, the vehi- cles audio system has a menu structure similar to the one in the iPod. See the iPods manual for detailed information.

To change a source in media mode, press MEdIA to display a list of sources (see the illustration above).

If you are not already in this modes normal view, press NAV* on the centre console to enter navigation mode.

SETTINg A dESTINATION USINg AN AddrESS

The following is an example of how a route can be set by entering an address.

1. From navigation modes normal view, press NAV* again to display the shortcut menu. Press the thumb wheel or OK to select Set address.

2. Scroll to the selection of your choice (Area, City, Street, etc.) and press the thumb wheel or OK. begin entering letters (see ENTErINg TEXT to the right) until a list appears or if applicable scroll to the right arrow on the text wheel and press the thumb wheel or OK to access the list of names.

3. Scroll to the desired name and press the thumb wheel or OK.

4. Continue to fill in the other information in the same way.

5. At the bottom of the menu, scroll to Set single destination or Add as waypoint and press the thumb wheel or OK.

6. If you have chosen Set single destination, the system will then calculate a route and begin providing directions to your destination. This alter- native will erase an existing itinerary. If you have chosen Add as waypoint, a new menu will be displayed.

Set POI and Set previous destination work in the same way.

When guidance has started, turn the thumb wheel or TUNE to change the map scale.

ENTErINg TEXT

When entering a destination, text can be entered in two ways: by using the text wheel (see the illustration in the right-hand column) or by pressing the buttons on the centre console keypad.

uSIng thE tEXt whEEL: Turn the thumb wheel or tunE to scroll to the

desired letter. Press the thumb wheel or OK to enter the letter in the search field at the top right of the screen.

SEnSuS InfOtAInMEnt - nAvIgAtIOn MODE*

Scroll to ABC or 123 to toggle between letters and numbers.

Scroll to More and press the thumb wheel or OK to toggle between various special characters.

Scroll to the right arrow to access the list of names to the right of the scroll wheel (if anything has been found matching your search criteria).

Last 5 show the five most recently entered names.

Erase characters with EXIT.

uSIng thE cEntRE cOnSOLE KEYpAD.

Press a button once to enter the first letter on it, twice for the second letter, etc.

PrOgrAMMINg A FAVOUrITE FUNCTION (* FAV)

The following example shows how guidance can be paused or resumed by programming the * FAV button.

1. From navigation modes main view, press and hold the * FAV button until the favourite menu is displayed.

2. Scroll to pause/resume guidance and press the thumb wheel or OK. A message will be dis- played briefly to confirm that your choice has been stored on the * FAV button.

3. Press * FAV to pause or resume guidance.

Functions can also be programmed in the same way in RADIO and MEDIA modes.

T P

1 53

29 (E

ng lis

h) A

T 1

22 0.

P ri

nt ed

in S

w ed

en , g

te

b o

rg 2

01 2,

C o

p yr

ig ht

2

0 0

0 -2

01 2

V o

lv o

C ar

C o

rp o

ra tio

n

SEnSuS InfOtAInMEnt - vOIcE cOntROL*

The voice control feature (only available in cars fitted with the optional navigation system) can be used to voice-activate certain functions on a bluetooth- enabled mobile phone and the navigation system.

To initiate a voice command, press the voice control button (1) on the right-hand steering wheel keypad and wait for the tone. The system will display commonly used commands on the screen when the button has been pressed.

When giving commands:

After the tone, speak at your normal speed and in a normal tone of voice.

The windows, etc., should be closed for best results.

Avoid background noise in the cabin when giving the command.

If you are uncertain of a command, saying help after the tone will prompt the system to provide applicable commands, depending on the situation.

Voice commands can be cancelled by:

Saying Cancel after the tone

Not speaking

Pressing and holding the voice control button

Pressing EXIT or one of the mode (RADIO, ME- DIA, etc.) buttons.

tutORIAL

Voice control contains a tutorial feature that helps you learn how to use the system. This feature can be started in two ways.

Press the voice control button, wait for the tone and say Voice tutorial.

Press the My CAr button on the centre console, and go to Settings -> Voice settings -> Voice tutorial and press OK to begin.

The tutorial lessons take

Manualsnet FAQs

If you want to find out how the S80 Volvo works, you can view and download the Volvo S80 Sensus Infotainment 2013 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Volvo S80 as well as other Volvo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Volvo S80. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Volvo S80 Sensus Infotainment 2013 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Volvo S80 Sensus Infotainment 2013 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Volvo S80 Sensus Infotainment 2013 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Volvo S80 Sensus Infotainment 2013 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Volvo S80 Sensus Infotainment 2013 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.