Contents

Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual PDF

1 of 52
1 of 52

Summary of Content for Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual PDF

WEB ED IT ION

SENSUS NAV IGAT ION

Road type Colour / paint

Motorway Orange

Primary road Dark grey

Smaller primary road Grey

Ordinary road Light grey

Local road White

Text and symbols on the screen

Event at next guidance point

Distance to next guidance point

Name of next road/street

Facility/point of interest (POI)

Planned route final destination

Planned route intermediate destination

Symbol for destination/final destination

Calculated arrival time at final destination

Calculated remaining distance to destination

Compass

Traffic information

Section covered by traffic information

Current road/street name - at car's current position (15)

Planned route

The car's current position

Stored location

Map scale

SENSUS NAVIGATION Sensus Navigation is a satellite based traf- fic information and route guidance system.

Development work is constantly in progress to improve our product. Modifications may mean

that information, descriptions and illustrations in this supplement differ from the equipment in the car. We reserve the right to make modifications without prior notice.

Table of contents

2

01

01 Introduction Introduction................................................. 5 Sensus Navigation...................................... 6 Navigation - operation................................ 9 Navigation - character wheel and key- board......................................................... 11 Navigation - voice recognition.................. 12

02

02 Specify destination, itinerary and route

Navigation - specify destination............... 15 Navigation - points of interest (POI) sym- bols........................................................... 19 Navigation - itinerary................................. 20 Navigation - route..................................... 21 Navigation - route options........................ 23 Navigation - map options......................... 26 Navigation - guidance options.................. 28 Navigation - importing/exporting stored locations.................................................... 30 03

03 Traffic information Navigation - traffic information................. 33

Table of contents

3

04

04 Map and system information Navigation - map and system informa- tion............................................................ 37 Navigation - menu overview..................... 38 Navigation - fault tracing........................... 41 Navigation - license agreement and copyright................................................... 43

05

05 Alphabetical Index Alphabetical Index.................................... 46

INTRODUCTION

01 Introduction

01

* Option/accessory, for more information, see Introduction. 5

Introduction This supplement is a supplement to the nor- mal owner's manual for the car.

In the event of uncertainty regarding any of the car's functions, consult the owner's man- ual in the first instance. For answers to addi- tional questions it is recommended to contact a dealer or a representative of Volvo Car Cor- poration.

The specifications, design features and illus- trations in this supplement are not binding. We reserve the right to make modifications without prior notice.

Volvo Car Corporation

Options/accessories All types of option/accessory are marked with an asterisk: *.

In addition to standard equipment, the sup- plement also describes options (factory fitted equipment) and certain accessories (retrofit- ted extra equipment).

The equipment described in the supplement is not available in all cars - they have different equipment depending on adaptations for the needs of different markets and national or local laws and regulations.

In the event of uncertainty over what is stand- ard or an option/accessory, contact a Volvo dealer.

Owner's Manual in mobile devices

NOTE

The Owner's manual is available for down- load as a mobile application (applies for certain car models and mobile devices), see www.volvocars.com.

The mobile application also includes video and searchable content and easy naviga- tion between different sections.

01 Introduction

01

6 * Option/accessory, for more information, see Introduction.

Sensus Navigation Basic description and overview of Sensus Navigation.

The navigation system calculates the route, travel time and distance to the selected desti- nation. The system gives guidance and instructions for junctions, etc. If there is a deviation from the planned route outline dur- ing the journey then the system automatically calculates a new route outline.

The navigation system can be used without a destination being selected.

The system is supplied with default settings, but starts with the settings last used.

Volvo Sensus Navigation uses reference sys- tem WGS84, which gives longitude and lati- tude positions.

Points to remember The navigation system provides road informa- tion which guides to a preset destination. However, not all of the recommended guid- ance is always reliable, since situations may

arise that lie outside the capacity and judge- ment of the navigation system, such as sud- den changes in the weather.

WARNING

Observe the following.

Direct all your attention to the road and make sure that all your concentra- tion is on driving.

Follow applicable traffic legislation and drive with good judgment.

Due to weather conditions or time of year affecting the road conditions, some recommendations may be less reliable.

System overview

Keypad in the steering wheel for menus, volume and voice recognition.

The screen displays maps and provides detailed information on route type, dis- tance, menus, etc.

Control panel in centre console for activa- tion of the navigation system, menus and volume.

USB connection.

Microphone for voice recognition.

Navigation system audio uses the front loud- speakers.

Remote control* can be used for all functions in the navigation system. The remote con- trol's buttons have the same functions as the buttons in the centre console or steering wheel keypad.

01 Introduction

01

}} 7

Map overview

Examples of map images for the current position. Itinerary, junction map and scroll mode are some of the views the screen can show. NOTE: the illustrations are schematic - details may vary depending on software version and market.

The appearance of the screen depends on geographic position and the settings made,

e.g. map scale and which POI options are selected to be shown.

|| 01 Introduction

01

8

Explanations for the text, signs and symbols that may appear on the display are available on the front of the cover.

Three alternative route outlines can be calculated when an Itinerary is set, see (p. 23).

Detailed junction map - the left-hand sec- tion of the screen shows a detailed enlargement of the next junction. The sit- uation is always supplemented with a voice message, see (p. 23).

Avoid a particular area, see (p. 23).

Scroll mode, see (p. 9).

Related information Navigation - operation (p. 9)

Navigation - voice recognition (p. 12)

01 Introduction

01

}} * Option/accessory, for more information, see Introduction. 9

Navigation - operation Basic operation of Sensus Navigation and examples of use.

The navigation system can be operated from the centre console, steering wheel buttons, remote control* and partly with voice recogni- tion. For basic operation of the system, see section "Audio and media - operating the system" in the owner's manual.

Activate Sensus Navigation Press the NAV button in the centre con-

sole. > After a short time a map of the current

geographic area is shown where the car is symbolised by a blue triangle.

WARNING

Observe the following.

Direct all your attention to the road and make sure that all your concentra- tion is on driving.

Follow applicable traffic legislation and drive with good judgment.

Due to weather conditions or time of year affecting the road conditions, some recommendations may be less reliable.

The navigation system cannot be deacti- vated, but instead operates in the back- ground - it is not deactivated until the remote control key is removed from the ignition switch.

NOTE

The navigation system is also available when the engine is switched off. When the battery level gets too low the system switches off.

Menus In addition to the system's normal source menu and shortcut menu (see owner's man- ual, section Menus in Audio and media - operating the system) there is a scroll menu for the navigation system.

In Scroll mode a crosshair is moved over the map image with the centre console's numeri- cal keys.

Scroll mode with crosshair1.

Activate/deactivate scroll mode Activate - press one of the numerical keys

0-9.

Deactivate - press EXIT or NAV.

Scroll Press one of the numerical digit keys

1-2-3-4-6-7-8-9 - a directional arrow is shown in the margins combined with the number that will be used to scroll the map in the desired direction.

Zoom Turn the TUNE knob.

Centring the map Pressing the number 5 in Scroll mode centres the map around the car's position.

If an Itinerary with Waypoints is activated, the map is centred around each respective Way- point with each additional press.

1 Select whether the position of the crosshair/cursor should be shown with name or GPS coordinates, see (p. 26).

|| 01 Introduction

01

10

Scroll menu

1. In scroll mode, press OK/MENU. > A menu opens for the point on the map

to which the centre of the crosshair is pointing.

2. Select function:

Set single destination - Deletes any previous destinations in the itinerary, and starts guidance on the map.

Add as waypoint - Adds the selected point to the itinerary.

POI information - shows name and address on the screen for the POI located closest to the crosshair. For more information on POI options, see (p. 15).

Traffic information on map - Allows you to view traffic messages2 around the selected location.

Information - Shows information available about the selected location.

Save - allows you to store the high- lighted location in the memory, to then be able to specify as destination (p. 15).

Example Guidance to desired point of interest (POI):

1. If the map view is not shown - press NAV. > The map view is shown.

2. Press NAV. > The shortcut menu is opened.

3. Highlight Set point of interest and con- firm with OK/MENU.

4. Highlight e.g. Near the car and confirm with OK/MENU. > A list of hits is shown.

5. Highlight e.g. Nearest tourist attraction and confirm with OK/MENU. > A list of hits is shown.

6. Highlight the desired alternative in the list and confirm with OK/MENU. > A pop-up menu is shown.

7. Highlight Set single destination and confirm with OK/MENU. > Guidance starts - follow the instruc-

tions.

See also examples of voice recognition con- trol (p. 12) of the navigation system.

Related information Sensus Navigation (p. 6)

Navigation - character wheel and key- board (p. 11)

Navigation - menu overview (p. 38)

Navigation - fault tracing (p. 41)

Navigation - map and system information (p. 37)

2 The service is not available for all areas/markets.

01 Introduction

01

}} 11

Navigation - character wheel and keyboard Use the character wheel or the centre console keypad for entering text and selecting options. For example, enter information about an address or a facility.

Screen view with text field or optional text.

Activate an option After marking a desired function/menu bar using the TUNE knob, press OK/MENU to see the next level of functions/options.

Enter with the character wheel

Character wheel.

1. Mark a text field. 2. Press OK/MENU to call up the character

wheel. 3. Select the characters using the TUNE

knob and enter them by pressing OK/ MENU.

Enter with the numerical keys

Numerical keyboard3.

Another way of entering characters is using the centre console's buttons 0-9, * and #.

When 9 is pressed, a bar appears with all characters4 under the but-

tons, e.g. w, x, y, z and 9. Quick presses on the button move the cursor through these characters.

Stop using the cursor on the desired character to select it - the character is shown on the enter line.

Delete/change using EXIT.

3 NOTE: The figure is schematic - details may vary depending on car model and market. 4 The character for each button may vary depending on market.

|| 01 Introduction

01

12

More options

NOTE

Faded characters cannot be selected in combination with the currently input char- acters.

In the character wheel's inset menu there are further options that have more characters and digits:

123/ABC + OK/MENU - the character wheel switches between numbers and characters.

MORE + OK/MENU - alternative charac- ters are shown in the wheel.

=> + OK/MENU - the cursor moves to the list on the right-hand side of the screen, where selections can be made using OK/MENU.

Postcode + OK/MENU - the cursor moves to the list on the right-hand side of the screen, where selections can be made using OK/MENU, see Specify des- tination with postcode (p. 15).

List of options

List that matches entered characters.

A search will list the possible options based on input information.

The digit "149" in the screen's top right-hand corner means that the list contains 149 possi- ble options that match the entered letters "LON".

No list An empty list and the characters "***" in the screen's top right-hand corner mean that the number of available options with current entered characters is greater than 1000 - when the amount is less, the current options are shown automatically.

To reduce the number of options in the list:

Enter more characters on the text line.

Related information Navigation - operation (p. 9)

Navigation - voice recognition Example of voice recognition control of the navigation system.

For a basic description of voice recognition, see section "Audio and media - voice recog- nition" in the owner's manual.

The following dialogues are only examples. The system's response may vary depending on the situation.

Start guidance The following dialogue with voice commands starts guidance in accordance with the speci- fied itinerary.

Say: "Start route guidance". > The system replies: "Starts

guidance".

Stop guidance The following dialogue with voice commands stops guidance.

1. Say: "Cancel route guidance". > The system replies: "Are you sure

you want to stop guidance?".

2. Say: "Yes". > The system replies: "Stops

guidance".

01 Introduction

01

13

Specify destination with point of interest (POI) The following dialogue with voice commands starts guidance to the nearest filling station. The scenario also works for other points of interest such as e.g. hotels and restaurants.

1. Say: "Nearest filling station.". > The system replies: "Select a line

number, or say next page.".

2. Say the line number where the desired filling station is specified (e.g. line 5): "5". > The system replies: "Number 5

accepted. Do you want to specify the destination shown as an intermediate destination?".

3. Say: "Yes". > The system replies: "Intermediate

destination 5 has been specified. Do you want to start guidance?".

4. Say: "Yes". > The route is calculated and guidance

starts.

More commands More commands for voice recognition control of the navigation system can be found in the normal view for MY CAR by pressing OK/MENU and then selecting Settings Voice control settings Command list Navigation commands.

Related information Navigation - operation (p. 9)

SPECIFY DESTINATION, IT INERARY AND ROUTE

02 Specify destination, itinerary and route

02

}} * Option/accessory, for more information, see Introduction. 15

Navigation - specify destination Specify destination in the navigation system.

Each time a destination is specified it is pos- sible to save it as "stored location" or "home", which is then easily accessible when a destination shall be specified. The naviga- tion system gives guidance to a destination, and it is possible to add four waypoints in the itinerary. For many destinations, the naviga- tion system can also give further information with the Information menu option.

With the car connected to the Internet it is possible to use the app "Send to Car" to send map destinations from a browser and via Volvo On Call* mobile app to the naviga- tion system, see owner's manual and support.volvocars.com.

To access the following alternative methods for specifying destinations, in the normal view for the navigation source, press OK/MENU and select Set destination.

Specify destination with home Note that the destination must have been saved previously to be specified.

In the normal view for the navigation source, press OK/MENU and select Set destination Home. > Guidance starts.

Specify destination with address It is sufficient to only enter a city/town in order to obtain an itinerary with guidance - it guides to the centre of the city/town.

NOTE

The definition of city or area may vary from country to country and even within the same country. In some cases, it refers to a municipality and in others it refers to a dis- trict.

1. In the normal view for the navigation source, press OK/MENU and select Set destination Address.

2. Fill in one or more of the following search options:

Country:

City:

Street:

Number:

Junction:

3. If more information about the destination is required, select Information and then the required information:

Map - Shows where on the map the location can be found - sometimes with additional information.

Call number1 - Calls the facility if a telephone number is given.

Online info.1 - Supplementary infor- mation is downloaded from the Inter- net.

4. To store the address in the memory, select Save and then as Stored location or as Home.

1 Requires connected mobile phone, see owner's manual.

|| 02 Specify destination, itinerary and route

02

16

5. Specify as intermediate destination or as single destination:

Add as waypoint - adds the address to the itinerary.

Set single destination - Deletes any previous destination in the itinerary and starts guidance to the current des- tination.

Specify destination with point of interest (POI) POI (Point of Interest) also denominated as point of interest and facility.

The map database contains a large number of searchable POI2 options which can be specified as destinations.

1. In the normal view for the navigation source, press OK/MENU and select Set destination Point of interest (POI).

2. Search for point of interest using the fol- lowing:

By name - leads directly to the char- acter wheel and refers to searching of POI options with their proper name, e.g. "Peppes Bodega". The search area is the whole of the current map area, e.g. EUROPE, see Maps - con- tent (p. 37).

By category - enables limited search- ing of POI options - select to enter their category (e.g. bank/hotel/ museum), proper name, country and/or city/town.

Near the car - refers to searching of POI options around the car's current position.

Along the route - refers to searching of POI options along the set itinerary.

Near the destination - refers to searching of POI options in the vicinity of the destination.

Around point on map - refers to searching of POI options with the scroll function's crosshair - see (p. 9).

If more information about the destination is required, select Information and then the required information.

3. To store the address in the memory, select Save and then as Stored location or as Home.

4. Specify as intermediate destination or as single destination:

Add as waypoint - adds the address to the itinerary.

Set single destination - Deletes any previous destination in the itinerary and starts guidance to the current des- tination.

Specify destination using previous destination 1. In the normal view for the navigation

source, press OK/MENU and select Set destination Previous destination.

2. Select a destination in the list.

If more information about the destination is required, select Information and then the required information.

Here it is also possible to delete a desti- nation, select Delete or Delete all.

2 To select which POI options should be shown on the map, see section Points of interest (POI) on map (p. 26).

02 Specify destination, itinerary and route

02

}} 17

3. Specify as intermediate destination or as single destination:

Add as waypoint - adds the address to the itinerary.

Set single destination - Deletes any previous destination in the itinerary and starts guidance to the current des- tination.

Specify destination using previously stored location Collected here are the destinations stored with the menu option Save Stored location.

Note that the destination must have been saved previously.

1. In the normal view for the navigation source, press OK/MENU and select Set destination Stored location.

2. Open saved destination:

Routes - e.g. recorded section of road.

Other - e.g. saved locations.

If more information about the destination is required, select Information and then the required information.

Here it is also possible to edit or delete a saved destination, select Edit, Delete or Delete all.

3. Specify as intermediate destination or as single destination:

Add as waypoint - adds the address to the itinerary.

Set single destination - Deletes any previous destination in the itinerary and starts guidance to the current des- tination.

Specify destination with Internet search Requires connection to the Internet, see owner's manual

1. In the normal view for the navigation source, press OK/MENU and select Set destination Internet search.

2. Follow the on-screen instructions.

Specify destination with postcode 1. In the normal view for the navigation

source, press OK/MENU and select Set destination Postcode.

2. Type in the postcode, and country if required.

If more information about the destination is required, select Information and then the required information.

3. To store the destination in the memory, select Save and then as Stored location or as Home.

4. Specify as intermediate destination or as single destination:

Add as waypoint - adds the address to the itinerary.

Set single destination - Deletes any previous destination in the itinerary and starts guidance to the current des- tination.

Specify destination with latitude and longitude

1. In the normal view for the navigation source, press OK/MENU and select Set destination Latitude and longitude.

2. First decide which method the GPS coor- dinates should be specified with, select Format::

DDMM'SS'' - position with Degrees, Minutes and Seconds.

Decimal - position with Decimals.

|| 02 Specify destination, itinerary and route

02

18

3. Type in the position.

If more information about the destination is required, select Information and then the required information.

4. To store the address in the memory, select Save and then as Stored location or as Home.

5. Specify as intermediate destination or as single destination:

Add as waypoint - adds the address to the itinerary.

Set single destination - Deletes any previous destination in the itinerary and starts guidance to the current des- tination.

Specify destination using point on map

Cursor position specified with GPS coordinates. To change to showing name, select Settings Map options Position information.

1. In the normal view for the navigation source, press OK/MENU and select Set destination Select point on map.

2. Locate and specify desired point on map using the crosshair, see section Menus (p. 9) .

3. To store the address in the memory, press OK/MENU and select Save and then as Stored location or as Home. > The destination is stored as a symbol/

icon on the map if the Stored location on map function is selected, see sec- tion Map options (p. 26).

4. Specify as intermediate destination or as single destination:

Add as waypoint - adds the address to the itinerary.

Set single destination - Deletes any previous destination in the itinerary and starts guidance to the current des- tination.

Specify destination with travel guide Search with travel guide (Travel guide) means that prepared suggestions are available to choose from with varying themes, e.g. restau- rants, scenic roads or sights and landmarks.

A travel guide is stored in a USB memory, which must be fitted in the car's USB con- nector in the tunnel console's rear storage compartment.

1. In the normal view for the navigation source, press OK/MENU and select Set destination Travel guide.

If the menu option is not visible on the screen then there are no suggestions in the area the car is currently in, or a USB device is not connected.

2. Select travel guide via one of the follow- ing categories:

Restaurants

Tourist attractions

Hotels

Tourist routes

Other

3. If available in the travel guide, it is possi- ble to view details and images, as well as to play back audio, select:

Details

Photos

Play audio

4. Set Start guidance.

Related information Navigation - character wheel and key-

board (p. 11)

Navigation - operation (p. 9)

Navigation - itinerary (p. 20)

02 Specify destination, itinerary and route

02

19

Navigation - points of interest (POI) symbols Shown here are examples of how symbols for different points of interest (POI) may appear.

To set which POI symbols should be shown on the map, see section Points of interest (POI) on map (p. 26).

NOTE

The symbol for a POI and the number of POIs varies between different mar- kets.

Symbols may appear and others dis- appear in conjunction with updating the map data - you can browse through all the symbols for the relevant map system in the menu system under Settings Map options POI symbols Selected.

Examples of POI symbols, grouped according to society function:

Car dealer/repair

Petrol station

Car repair

Parking

Tourist attraction

Golf

Cinema

Amusement park

Recreation

Restaurant

Bar or cafe

Shopping centre

Hotel

Railway transport

Railway station

Railway access

Airport

Bus station

Ferry terminal

Government or comunity facility

Government office

Police/emergency

Library

Hospital or health care facility

Pharmacy

Cash dispenser

ATM/Bank exchange

Post office

Education facility

Related information Navigation - specify destination (p. 15)

Navigation - map options (p. 26)

Navigation - guidance options (p. 28)

Navigation - map and system information (p. 37)

Navigation - importing/exporting stored locations (p. 30)

02 Specify destination, itinerary and route

02

20

Navigation - itinerary Arrange an itinerary and start guidance to navigate to desired destination.

An Itinerary is created when a destination is saved. The system handles one itinerary at a time with a maximum of 4 waypoints.

A destination must be specified for the itiner- ary to be activated.

1. In the normal view for the navigation source, press OK/MENU and select Itinerary.

2. If a waypoint is required in the itinerary, select Add another waypoint.

A maximum of 4 waypoints can be added to the itinerary. The order can be adjusted, see section "Adjust itinerary" below.

3. If information about a waypoint is required, highlight the waypoint, press OK/MENU and select Information.

4. Set Start guidance. > Current itinerary is activated and guid-

ance is started unless the Route sug- gestion(p. 21) function is activated.

5. If the Route suggestion function is acti- vated, select route. > Current itinerary is activated and guid-

ance is started.

Stop guidance In the normal view for the navigation

source, press NAV and select Cancel guidance. > Guidance is interrupted.

Resume guidance In the normal view for the navigation

source, press NAV and select Resume guidance. > Guidance continues where it was stop-

ped.

Adjust itinerary

1. Highlight the waypoint and confirm with OK/MENU.

2. Select what shall be adjusted and make the changes:

Delete - deletes the waypoint.

Move in list - changes order in the itinerary (see next heading).

Save - saves the waypoint.

Change the order of waypoints 1. Select the waypoint to be moved and

confirm with OK/MENU.

2. Highlight Move in list and confirm with OK/MENU.

3. Turn TUNE to move the waypoint up/ down in the list. When the desired loca- tion has been reached, confirm with OK/ MENU.

Delete itinerary In the normal view for the navigation

source, press NAV and select Itinerary Clear itinerary.

> Current itinerary including all way- points is deleted.

Related information Navigation - specify destination (p. 15)

Navigation - route (p. 21)

Navigation - importing/exporting stored locations (p. 30)

02 Specify destination, itinerary and route

02

}} 21

Navigation - route The route can be shown in detail or as an overview and alternative routes can be selected. It is possible to record the route in order to save it in the system's memory.

Route - avoid With this function the driver can select to avoid the next approaching section of a route. The function only works where alterna- tive streets/roads are available, otherwise the highlighting, or parts of it, is ignored.

1. In the normal view for the navigation source, press OK/MENU and select Route Avoid.

2. Select desired action:

Highlighted subsection.

Reroute - the system calculates another route in which consideration has been taken of the section to be avoided.

Longer - subsection to avoid is extended.

Shorter - subsection to avoid is short- ened.

Delete - highlighted subsections are deleted and the route is restored to the original version.

Alternative routes 1. In the normal view for the navigation

source, press OK/MENU and select Route Alternative routes to destination.

2. Select a suggested route or Route type:

ECO with traffic adaption - low fuel consumption3 prioritised.

Fast - short travel time prioritised.

Fast with traffic adaption - short travel time with minimal traffic queues3.

Short - short route prioritised. The route can also be set via smaller roads.

3 Coordinated with information from the Traffic radio.

|| 02 Specify destination, itinerary and route

02

22

Route overview In the normal view for the navigation

source, press OK/MENU and select Route Route overview. > Information is shown about the route's

intermediate destinations and final des- tination.

Detailed route information Shown here are the elements contained in each section between two waypoints, e.g. exits and junctions.

1. In the normal view for the navigation source, press OK/MENU and select Route Detailed route information. > Information is shown about the route's

intermediate destinations and final des- tination.

Detailed subsection on a route.

2. Zoom in/out on the map and scroll the route:

Next - scrolls to next subsection.

Previous - scrolls to previous subsec- tion.

Zoom in/Zoom out - enlarges/ reduces the map image of the current subsection.

Map of the remaining route This function shows the remaining distance for the route.

In the normal view for the navigation source, press OK/MENU and select Route Map of remaining route. > A map image is shown containing the

itinerary's remaining distance from the car's current position.

For functionality and available functions, see section Menus (p. 9) .

Record a route Record and store the route in the navigation system's memory.

1. In the normal view for the navigation source, press OK/MENU and select Route Record route. > Recording is started. The REC symbol

is shown on the screen while recording is in progress.

2. To stop recording, press OK/MENU and select Route Stop recording. > The recorded route is saved.

02 Specify destination, itinerary and route

02

}} 23

Recoded routes can be opened in the menu Set destination Stored location Routes.

Recorded files can be exported/transferred to a USB memory4 in order to e.g. be copied to another vehicle's GPS navigator. For more information, see (p. 30).

Related information Navigation - itinerary (p. 20)

Navigation - operation (p. 9)

Navigation - traffic information (p. 33)

Navigation - fault tracing (p. 41)

Navigation - route options Settings for route options include route type and number of route proposals, amongst other things.

Route type 1. In the normal view for the navigation

source, press OK/MENU and select Settings Route options.

2. Select type of route:

Fast with traffic adaption - short travel time with minimal traffic queues5.

Fast - short travel time prioritised.

Short - short route prioritised. The route can also be set via smaller roads.

ECO with traffic adaption - low fuel consumption5 prioritised.

Reroute on request Option for recalculating route due to traffic information.

1. In the normal view for the navigation source, press OK/MENU and select Settings Route options Reroute on request.

2. Select functionality:

Box selected - recalculation of route must be confirmed with OK/MENU or ignored with EXIT.

Box unselected - automatic recalcula- tion of route.

Route proposals 1. In the normal view for the navigation

source, press OK/MENU and select Settings Route options Route proposals.

4 Connected in the centre console's rear storage compartment. 5 Coordinated with information from the Traffic radio.

|| 02 Specify destination, itinerary and route

02

24

2.

Route proposals.

Select setting for use of route suggestion:

1 - starts guidance immediately in accordance with specified itinerary.

3 - the system suggests 3 alternative routes, of which one alternative route must be selected before guidance starts. Note that there is a slightly longer delay before guidance starts because the system has to calculate 3 suitable routes.

Use carpool lane6

Sometimes private passenger cars are allowed to use lanes normally intended for local buses, commercial vehicles and taxis - this is provided that the passenger car is car- rying one or more passengers. With this func-

tion activated, lanes of this type are also included in the calculation of a suitable route.

1. In the normal view for the navigation source, press OK/MENU and select Settings Route options Use carpool lane.

2. Select setting for use of carpool lane:

Never

For 2 persons

Over 2 persons

Use express lane6

Sometimes private passenger cars are allowed to use lanes normally intended for local buses, commercial vehicles and taxis - this is provided that the passenger car is classed as a "green car" or similar. With this function activated, lanes of this type are also included in the calculation of a suitable route.

1. In the normal view for the navigation source, press OK/MENU and select Settings Route options Use express lane.

2. Select setting for use of express lane:

Box selected - express lane used in route calculations.

Box unselected - express lane not used.

Avoid area6

Motorways cannot be deselected. Motorways are always used alternative route during route calculation.

1. In the normal view for the navigation source, press OK/MENU and select Settings Route options Avoid area.

2. Select area to avoid along the route (if the area is already in the list as previously specified area - proceed to next step):

Select area on map - select desired area on map, for more information see "Create restricted area" below.

From stored location - select from saved locations.

> The selection is added in the list with areas to avoid.

6 The function is only available if such information is included in the map data.

02 Specify destination, itinerary and route

02

25

3.

Highlight the area in the list you wish to avoid, press OK/MENU and select Activate.

Here it is also possible for Edit, Deactivate and Delete areas. > The area is avoided during route calcu-

lation.

Create restricted area An area that shall be avoided is selected by highlighting directly on the map with a square box.

1. In the normal view for the navigation source, press OK/MENU and select Settings Route options Avoid area

Select area on map.

2. Scroll the map until the cursor is in the desired area.

3. Press OK/MENU. > A red box is created.

4. Turn TUNE to adjust the size of the box.

5. Press OK/MENU when the box covers the desired area. > The area is stored in the list of areas to

avoid.

For the area not to be included in route calcu- lation the area must be activated, see section "Avoid area" above.

Avoid certain traffic interruptions 6 In the normal view for the navigation

source, press OK/MENU and select Settings Route options:

Avoid motorways

Avoid toll roads

Avoid tunnels

Avoid ferries

Avoid car trains

Avoid vignette obligation

NOTE

If an itinerary is entered when these selections are made then there may be a certain delay after an option has been ticked/unticked since the itiner- ary must be recalculated.

If tunnels, toll roads and motorways are not selected then these are avoi- ded as far as possible and are only used if no other reasonable alternative is available.

Related information Navigation - traffic information (p. 33)

Navigation - itinerary (p. 20)

Navigation - specify destination (p. 15)

Navigation - operation (p. 9)

6 The function is only available if such information is included in the map data.

02 Specify destination, itinerary and route

02

26

Navigation - map options Settings can be made here for how the map should be shown and what should be shown.

Full screen map 1. In the normal view for the navigation

source, press OK/MENU and select Settings Map options Show full- screen map.

2. Select map size:

Box selected - shows map across whole screen.

Box unselected - car-related informa- tion such as e.g. passenger compart- ment temperature and media being played back are shown in the bottom and top of the screen.

Map position 1. In the normal view for the navigation

source, press OK/MENU and select Settings Map options Map type.

2. Select how the map should be shown on the screen:

North up - the map always shows North at the top of the screen. The car symbol moves in the relevant direction on the screen.

Map heading up - the car symbol is in the centre and always points up on the screen. The map image rotates under the car symbol in relation to how the road bends.

3D map basic - the map is viewed diagonally from above with the car symbol in the centre and direction of travel upward on the screen.

3D map enhanced - same as the pre- vious option but with different objects, buildings, etc. added into the map image.

Information along a motorway 1. In the normal view for the navigation

source, press OK/MENU and select Settings Map options Motorway information.

2. Select function:

Box selected - when the car is on a motorway the three (3) next exits that have e.g. a rest area or petrol station are shown. The list is sorted with the closest exit at the bottom of the list.

Box unselected - function switched off.

Information about current position 1. In the normal view for the navigation

source, press OK/MENU and select Settings Map options Position information.

2. Select position information:

Current road - the screen shows the name of the road/street where the car/ cursor is located.

Lat/Long - the screen shows the coordinates for the location where the car/cursor is located.

None - the screen shows no informa- tion for the location where the car/ cursor is located.

Compass There is a compass on the screen's map image that shows the direction in which the front of the car is pointing.

The red tip of the compass needle points north and the white end points south. A text-based compass direc- tion can also be selected as an alternative to the graphic compass.

02 Specify destination, itinerary and route

02

27

1. In the normal view for the navigation source, press OK/MENU and select Settings Map options Compass.

2. Select whether compass direction should be shown with a compass needle or with letters:

Graphic - a compass needle indicates the compass direction.

Text - the letters N for north, W for west, S for south or E for east indicate compass direction.

The map image's compass direction - north or direction of travel upward on the screen - can also be adjusted, see section "Map mode compass direction" above.

Points of interest (POI) on map 1. In the normal view for the navigation

source, press OK/MENU and select Settings Map options POI symbols.

Marked POI options are shown on the map.

2. Select which POI symbols should be shown on the map.

Default - POI specified with the func- tion Selected is/are shown.

Selected - select with the TUNE knob + OK for each POI required on the screen.

None - no POI is/are shown.

To avoid making the map image difficult to read, the number of POI options that can be viewed simultaneously on the screen is lim- ited - zooming into an area provides the opportunity to view several POI options.

Map colours 1. In the normal view for the navigation

source, press OK/MENU and select Settings Map options Map colours.

2. Select setting for map colours:

Automatic - a light sensor detects whether it is day or night and adapts the screen automatically.

Day - the colours and contrast of the screen become clear and sharp.

Night - the colours and contrast of the screen are adapted to provide the driver with optimum night vision.

Stored location on map In the normal view for the navigation

source, press OK/MENU and select Settings Map options Stored location on map. > All stored positions are shown.

Related information Navigation - route options (p. 23)

Navigation - guidance options (p. 28)

Navigation - map options (p. 26)

Navigation - points of interest (POI) sym- bols (p. 19)

Navigation - importing/exporting stored locations (p. 30)

02 Specify destination, itinerary and route

02

28

Navigation - guidance options Settings can be made here for how guidance should be presented.

Arrival time or Remaining travel time 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Time of arrival format.

2. Select option for display of time:

ETA - shows the estimated arrival time

RTA - shows the remaining time until arrival.

Street names in voice guidance 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Street names in voice guidance.

2. Select what voice guidance should include:

Box selected - distance and direction, as well as names of streets and roads.

Box unselected - distance and direc- tion.

Navigation with Turn-by-turn7

1. In the normal view for the navigation source, press OK/MENU and select Settings Guidance options Turn- by-turn navigation.

2. Select setting for display in combined instrument panel:

Box selected - shows next manoeuvre in the itinerary and the distance to it.

Box unselected - no display.

Automatic reading out of traffic 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Automatic read out of traffic.

2. Select setting for reading out of traffic information:

Box selected - important traffic disrup- tions on the route are read out.

Box unselected - no reading out.

Automatic audio adaptation 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Audio fadeout.

2. Select setting for map audio adaptation:

Box selected - Audio and media sys- tem, e.g. radio, is muted when voice guidance reads out information.

Box unselected - no audio adaptation.

Voice guidance During guidance, when the car approaches a junction or exit, a voice message gives dis- tance and type of next manoeuvre. At the same time a detailed map of the junction is displayed. The voice guidance message is repeated closer to the junction. To repeat a

7 Only applies to certain model variants.

02 Specify destination, itinerary and route

02

}} 29

message - press twice on the OK/MENU but- ton.

The volume can be adjusted with the audio unit's volume button (during ongoing voice message).

NOTE

There is no voice guidance during a cur- rent call with a Bluetooth-connected mobile phone.

1. In the normal view for the navigation source, press OK/MENU and select Settings Guidance options Voice guidance.

2. Select setting for voice guidance:

Box selected - distance and type of next manoeuvre are read out.

Box unselected - no voice guidance.

Simple voice guidance With voice guidance there are three (3) instructions given before each guid- ance point - one preparatory, one immedi- ately before and then the last one when the manoeuvre should be performed. With Simple voice guidance activated there is only one (1) instruction given for each guidance point.

1. In the normal view for the navigation source, press OK/MENU and select Settings Guidance options Use simple voice guidance.

2. Select setting for voice guidance:

Box selected - one (1) voice guidance instruction for each guidance point.

Box unselected - no voice guidance.

Safety camera 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Speed camera warning.

2. Select function:

Box selected - warning with acoustic signal and symbol when the car approaches a safety camera.

Box unselected - no warning.

NOTE

The type of information permissible for inclusion on the map is stipulated in national legislation. For current informa- tion, see www.volvocars.com/navi.

NOTE

Pay attention that the posted maxi- mum permissible speed may some- times be changed and accordingly deviate from the navigator's database.

The driver always has the responsibil- ity that the traffic and speed regula- tions in force are followed.

Signal for stored location 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Stored location notification.

2. Select between stored positions:

Box selected - an acoustic signal when the car approaches a user-stored loca- tion.

Box unselected - no acoustic signal.

Speed restriction8

1. In the normal view for the navigation source, press OK/MENU and select Settings Guidance options Show speed limits.

8 Only cars without the Road sign information function.

|| 02 Specify destination, itinerary and route

02

30

2. Select function:

Box selected - speed limit in force is shown with a sign in the combined instrument panel9.

Box unselected - no notification in the combined instrument panel.

Signal for POI in a guided round tour 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Travel POI notification.

2. Select function:

Box selected - an acoustic signal when the car approaches a POI that is included in a Travel guide (p. 15).

Box unselected - no acoustic signal.

Signal for guided round tour 1. In the normal view for the navigation

source, press OK/MENU and select Settings Guidance options Guided tour notification.

2. Select function:

Box selected - an acoustic signal when the car approaches a Travel guide (p. 15).

Box unselected - no acoustic signal.

Related information Navigation - traffic information (p. 33)

Navigation - importing/exporting stored locations Import and/or export stored routes and loca- tions.

For the import of POIs, the file format must be .gpx.

1. Connect the USB memory in the tunnel console's storage compartment.

2. In the normal view for the navigation source, press OK/MENU and select Settings Import/export stored locations.

3. Select what should be imported or expor- ted.

9 Only when speed information is available in map data.

02 Specify destination, itinerary and route

02

31

NOTE

Adding POI files to the map database requires a certain amount of computer knowledge!

File format for POI files and how the files are downloaded from the Internet are determined by the respective man- ufacturer/distributor. Consequently there is no standardised process for downloading POI files from the Inter- net - and for this reason this owner's manual does not show an exact step- by-step description.

If you have any questions - contact a Volvo dealer.

Related information Navigation - specify destination (p. 15)

Navigation - itinerary (p. 20)

Navigation - route (p. 21)

Navigation - points of interest (POI) sym- bols (p. 19)

TRAFFIC INFORMATION

03 Traffic information

03

}} 33

Navigation - traffic information The navigation system continuously receives traffic information transmitted via Traffic Mes- sage Channel (TMC) which is used for dynamic road directions. When situations that can affect the journey occur (e.g. accidents, road works) this is shown on the screen, and when a destination has been specified there is a recalculation of the route. Recalculation can take place automatically or require confirma- tion, see Reroute on request (p. 23).

TMC is a standardised coding system for traf- fic information. The receiver automatically searches for the correct frequency.

NOTE

TMC is not available in all areas/countries. The system's coverage area is under con- stant construction and updating may sometimes be necessary.

The traffic information is presented differently depending on whether the destination is specified or not specified.

This symbol on the screen indicates that traffic informa- tion is available within the current reception area. Sym- bol colour indicates the importance of the informa- tion:

RED - the information is read out and the position is shown on the map.

YELLOW - no reading out, the position is shown on the map.

This symbol marks the posi- tion of a traffic problem, for more information, see sec- tion Traffic information - with specified destination > Traf- fic information on map.

NOTE

Traffic information is not available in all areas/countries.

The traffic information transmission areas are constantly being expanded.

Activate/deactivate

1. In the normal view for the navigation source, press OK/MENU and select Traffic information.

2. Select in the box to activate traffic infor- mation, or deselect the box to deactivate.

Traffic information - without specified destination The function allows you to show traffic prob- lems without the destination having been selected.

Opens the scroll function on the map.

Traffic information on map 1. In the normal view for the navigation

source, press OK/MENU and select Traffic information Traffic on map.

2. Search for traffic problems with the scroll function, see description below in the section Traffic information - with specified destination > Traffic information on map.

All traffic 1. In the normal view for the navigation

source, press OK/MENU and select Traffic information Traffic on map. > A list of all traffic messages within the

reception area is shown.

2. Select what should be shown, see description below in the section Traffic information - with specified destination > All traffic.

|| 03 Traffic information

03

34

Traffic information - with specified destination The function shows traffic problems when the destination has been entered.

Listening to traffic information along the route In the normal view for the navigation

source, press OK/MENU and select Traffic information Listen to traffic on route. > Current traffic messages along the itin-

erary will be read out.

All traffic 1. In the normal view for the navigation

source, press OK/MENU and select Traffic information All traffic. > A list of all traffic messages within the

reception area is shown. Traffic infor- mation is first grouped according to country (in border areas), then road number and then street name.

2. Select a traffic problem (road/street) and confirm with OK/MENU. > Traffic problems are listed, with the

most serious disruption at the top, e.g. total stop in a lane.

3. Select a traffic problem and confirm with OK/MENU. > Additional information about the traffic

problem is shown, as well as position on map. The map image is centred around the position of the traffic prob- lem.

Traffic problem on map.

Traffic information on map 1. In the normal view for the navigation

source, press OK/MENU and select Traffic information Traffic on map.

2. Scroll the map until the traffic event/ symbol for which detailed information is required is positioned in the crosshair. > A yellow frame around the symbol is lit.

3. Confirm the selection by pressing OK/MENU > Available information is shown, e.g.

street name/road number

country

nature of the problem

extent of the problem

duration of the problem.

If there are several traffic problems within the crosshair frame then the one closest to the centre of the crosshair is shown first.

Figures such as "2/5" in the upper part of the screen mean that the informa- tion shown is number 2 of a total of 5 messages within the crosshair - remaining messages are browsed to using repeated short presses on OK/MENU.

Direct listed information

03 Traffic information

03

35

1. In the normal view for the navigation source, press OK/MENU and select Traffic information Traffic on map. > Direct listed traffic problems (two in the

previous illustration) indicate that the information affects the current itiner- ary.

2. Select a traffic problem and confirm with OK/MENU. > Additional information about the traffic

problem is shown, as well as position on map. The map image is centred around the position of the traffic prob- lem.

Traffic problem on map.

Extent of traffic problem Certain traffic problems are not just tied to one single position, but can cover a longer section.

In addition to the symbol for the position of the traffic problem, the current distance is

also highlighted with a row of red crosses "xxxxx".

The length of the highlighting corre- sponds to the extent (distance) of the traffic problem.

Driving direction is indicated by the side of the road that is highlighted.

Traffic problem with its extent.

Size of area for traffic information The map scale determines how much traffic information can be shown. The larger the map area that is shown on the screen, the greater the number of traffic disruptions that can be shown.

Related information Navigation - guidance options (p. 28)

Navigation - specify destination (p. 15)

Navigation - itinerary (p. 20)

MAP AND SYSTEM INFORMATION

04 Map and system information

04

}} 37

Navigation - map and system information Volvo offers a number of maps that cover dif- ferent parts of the world. A map consists of map data and road data with related informa- tion.

During the update, new information is trans- ferred to the navigation system and old out- dated information is deleted.

System information

In the normal view for the navigation source, press OK/MENU and select Settings System information. > An excerpt from the current status in

the navigation system is shown, e.g. current transmitter of traffic information and operative map data, as well as map version.

Maps - content Maps are developed with enhanced informa- tion and are updated continuously.

NOTE

Map data does not have 100 percent cov- erage in all areas/countries.

The system's coverage area is under con- stant construction and updating may sometimes be necessary.

See support.volvocars.com for information about maps and other information related to Sensus Navigation.

Map areas The car's navigation system varies depending on market. Should you need to modify the map area - contact a Volvo dealer for infor- mation on how to proceed.

Updating the maps Updated map data is downloaded from the Internet1 to a USB memory2. The transfer of the downloaded update to the car's naviga- tion system then takes place via the car's USB connection, which is located in the tun- nel console's rear storage compartment.

NOTE

Before update of the car's map data is started:

First read through the information and instructions from the Internet related to the download and update of map data.

In the event of any questions about updating - contact a Volvo dealer or see www.volvocars.com/navi.

1 See information on support.volvocars.com. 2 The USB memory must have at least 20 GB of space available.

|| 04 Map and system information

04

38

Updating Follow the onscreen instructions in order to update the navigation system - this shows the progress of the update process as well as approximate time remaining.

NOTE

A number of the Infotainment functions are disabled or reduced during updating.

1. Start the engine.

2. Connect the USB memory containing the update to the car's USB connector and follow the onscreen instructions. > The display screen shows Map

update finished. All of the navigation system's functions can be used again.

NOTE

In certain cases, updating map data may also add new functions, which are not described in this manual.

Continue an interrupted update If the update is not finished when the engine is switched off then the process continues where it left off next time the engine is started, providing the USB memory is still connected. If the USB memory is not con- nected - start the engine and then connect the USB memory.

The screen shows Map update finished when the update is completed.

Related information Navigation - license agreement and copy-

right (p. 43)

Navigation - fault tracing (p. 41)

Sensus Navigation (p. 6)

Navigation - menu overview Overview of possible options and settings in the navigation system's menus.

Three of the menu levels are shown. There may be more submenus, which are then described in their respective section.

Open the menu system by pressing OK/MENU in the normal view for the nav- igation source.

Repeat voice guidance (p. 28)

Set destination (p. 15)

Home (p. 15)

Address

Country:

City:

Street:

Number:

Junction:

Set single destination

Add as waypoint

Information

Save

(p. 15)

04 Map and system information

04

}} 39

Point of interest (POI)

By name

By category

Near the car

Along the route

Near the destination

Around point on map

(p. 15)

Stored location

Set single destination

Edit

Delete

Delete all

(p. 15)

Previous destination

Set single destination

Add as waypoint

Information

Save

Delete

Delete all

(p. 15)

Internet search (p. 15)

Postcode

Country:

Postcode

Street:

Number:

Junction:

Set single destination

Add as waypoint

Information

Save

(p. 15)

Latitude and longitude

Format:

Set single destination

Add as waypoint

Information

Save

(p. 15)

Select point on map

Set single destination

Add as waypoint

Save

(p. 15)

Travel guide

Start guidance

Details

Photos

Play audio

Pause audio

(p. 15)

Itinerary

Itinerary

Start guidance

Add another waypoint

Clear itinerary

(p. 20)

Route

Avoid

Reroute

Longer

Shorter

Delete

(p. 21)

Alternative routes to desti- nation

(p. 21)

Route overview (p. 21)

|| 04 Map and system information

04

40

Detailed route information

Next

Previous

Zoom in

Zoom out

(p. 21)

Map of remaining route (p. 21)

Record route

or

Stop recording

(p. 21)

Traffic information (p. 33)

All traffic

Traffic on map

(p. 33)

Cancel guidance

or

Resume guidance

(p. 20)

Settings

Route options

Route type

Reroute on request

Route proposals

Use carpool lane

Use express lane

Avoid area

Avoid motorways

Avoid toll roads

Avoid tunnels

Avoid ferries

Avoid car trains

Avoid vignette obliga- tion

(p. 23) Map options

Show full-screen map

Map type

Motorway information

Position information

Compass

POI symbols

Map colours

Stored location on map

(p. 26)

04 Map and system information

04

}} 41

Guidance options

Time of arrival format

Street names in voice guidance

Turn-by-turn naviga- tion

Automatic read out of traffic

Audio fadeout

Voice guidance

Use simple voice guid- ance

Speed camera warn- ing

Stored location notifi- cation

Travel POI notification

Guided tour notifica- tion

(p. 28)

System information (p. 37)

FAV key options See the Favour- ites sec- tion in

the owner's manual.

Import/export stored loca- tions

(p. 30)

Related information Navigation - operation (p. 9)

Sensus Navigation (p. 6)

Navigation - fault tracing Below are examples of what can be interpre- ted as the navigation system not working as it should.

The position of the car on the map is wrong The Navigation system shows the position of the car to an accuracy of about 20 metres.

There is a greater chance of error when driv- ing on roads lying parallel to another road, on winding roads, on roads on several levels and after driving a long distance without making any distinctive turns.

High mountains, buildings, tunnels, viaducts, over/underpasses etc. also have a negative effect on the reception of GPS signals, which means that accuracy in calculating the posi- tion of the car may decrease.

The system does not always calculate the fastest/shortest route When calculating a route outline, distance, width of road, type of road, number of right or left turns, roundabouts etc. are all taken into account in order to produce the best theoreti- cal route. A more efficient selection of route may be possible based on experience and knowledge of the area.

|| 04 Map and system information

04

42

The system uses toll roads, motorways and ferries even though I chose to avoid them For technical reasons, the system can only use major roads when calculating a route out- line extending over a long distance.

If you selected to avoid toll roads and motor- ways, then they are avoided to the greatest possible extent and are only used if there is no other reasonable alternative available.

The position of the car on the map is incorrect after transportation If the car is transported, for example by ferry or train, or in such a way as to impede the reception of GPS signals, it can take up to 5 minutes before the position of the car is correctly calculated.

The position of the car on the map is incorrect after the car battery has been disconnected If power has been cut from the GPS antenna, it can take more than 5 minutes for the GPS signals to be received correctly and the posi- tion of the car to be calculated.

The car symbol on screen behaves erratically after a tyre change In addition to the GPS receiver, the car's speed sensor and a gyro assist in calculating the current position and direction of travel of the car. After fitting the spare wheel or chang-

ing between summer and winter tyres the system needs to "learn" the size of the new wheels.

In order for the system to work optimally it is recommended to turn the steering wheel to full lock a few times while driving, in a suita- ble location.

The map image does not correspond with the real situation Factors such as the constant expansion and rebuilding of the road network, new traffic regulations constantly being introduced etc. mean that the map database is not always complete.

The information stored in the maps is con- stantly being developed and updated. To download the latest map data, see Updating the maps (p. 37). See also support.volvocars.com for further information on maps, etc.

The scale of the map sometimes changes There is no detailed map information in cer- tain areas. The system then automatically changes the degree of magnification.

The car symbol on screen jumps forwards or spins The system may need a few seconds to sense the position and movement of the car before driving off.

Switch off both the system and the engine. Start again, but remain stationary for a while before starting to drive.

I shall go on a long trip but do not want specify a particular route outline to the cities I plan to travel through - How do I most simply create an itinerary? Specify the destination directly on the map using the hairline cross. The system automat- ically guides you to the final destination even though you are driving beside the intermedi- ate destinations.

My map information is not up-to-date The information stored in the maps is con- stantly being developed and updated. To download the latest map data, see Updating the maps (p. 37). See also support.volvocars.com for further information on maps, etc.

How can I easily check which map version is used? Search in the menu system for Settings System information in order to obtain infor- mation about version and the geographic area covered, see (p. 37).

Related information Navigation - map and system information

(p. 37)

Navigation - route (p. 21)

Navigation - route options (p. 23)

04 Map and system information

04

}} 43

Navigation - license agreement and copyright The following text is Volvo's agreement with the manufacturer/developer.

Copyright

Europe

Austria Bundesamt fr Eich- und Vermessungswesen.

Contains content of Stadt Wien data.wien.gv.at, licensed in accordance with http://creativecommons.org/licenses/by/3.0/ legalcode .

Contains content of Statdt Linz data.linz.gv.at, licensed in accordance with http://creativecommons.org/licenses /by/3.0/ legalcode .

Contains content of LINZ AG data.linz.gv.at, licensed in accordance with http:// creativecommons.org/licenses/by/3.0/ legalcode .

Belgium Realized by means of Brussels UrbIS Distribution & Copyright CIRB, available at http://www.cirb.irisnet.be/catalogue-de- services/urbis/telechargement .

Includes content made available by AGIV.

Croatia EuroGeographics.

Cyprus EuroGeographics.

Estonia EuroGeographics.

Finland Contains data from the National Land Survey of Finland Topographic Database 06/2012. (Terms of Use available at http:// www.maanmittauslaitos.fi/en/ NLS_open_data_licence_version1_20120501) .

Contains data that is made available by Itella in accordance with the terms available at: http://www.itella.fi/liitteet/palvelutjatuotteet/ yhteystietopalvelut/uusi_postal_ code_services_service_description_and_term s_of-user.pdf. Retrieved by HERE 09/2013.

France Source: IGN France 2009 BD TOPO .

Germany Die Grundlagendaten wurden mit Genehmigung der zustndigen Behrden entnommen.

Contains content of Bayrische Vermessungsverwaltung www.geodaten.bayern.de, licensed in accordance with http://creativecommons.org/ licenses/by/3.0/legalcode .

Contains content of LGL, www.lgl-bw.de, licensed in accordance with http://

creativecommons.org/licenses/by/3.0/ legalcode .

Contains Content of Stadt Kln offenedaten-koeln.de, licensed in accordance with http://creativecommons.org/ licenses/by/3.0/legalcode .

Great Britain Contains Ordnance Survey data Crown copyright and database right 2010.

Contains Royal Mail data Royal Mail copyright and database right 2010.

Greece Copyright Geomatics Ltd.

Guernsey The States of Guernsey

Teh States of Alderney

The Chief Pleas of Sark

The Royal Court of Guernsey

Hungary Copyright 2003; Top-Map Ltd.

Ireland Contains data made available by the Dublin City Council Multi Story Car Parking Space Availability as of 2013-11-02, licensed in accordance with http://psi.gov.ie/files/ 2010/03/PSI-Licence.pdf .

|| 04 Map and system information

04

44

Italy La Banca Dati Italiana stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana.

Contains data from Trasporto Passeggeri Emilia-Romagna- S.p.A.

Includes content of Comune di Bolgona licensed under http://creativecommons.org/ lice3nses/by/3.0/legalcode and updated by licensee July 1, 2013.

Includes content of Comune di Cesena licensed under http://creativecommons.org/ lice3nses/by/3.0/legalcode and updated by licensee July 1, 2013.

Includes contents of Ministero della Salute, and Regione Sicilia, licensed under http:// www.formez.it/iodl/ and updated by licensee September 1, 2013.

Includes contents of Provincia di Enna, Comune di Torino, Comune di Pisa, Comune di Trapani, Comune di Vicenza, Regione Lombardia, Regione Umbria, licensed under http://www.dati.gov.it/iodl/2.0/ and updated by licensee September 1, 2013.

Includes content of GeoforUs, licensed in accordance with http://creativecommons.org/ licenses/by/3.0/legalcode .

Includes content of Comune di Milano, licensed under http://creativecommons.org/

licenses/by/2.5/it/legalcode and updated by licensee November 1, 2013.

Includes content of the Comunit Montana della Carnia, licensed under http:// www.dati.gov.it/iodl/2.0/ and updated by licensee December 1, 2013.

Includes content of Agenzia per la mobilit licensed under http://creativecommons.org/ licenses/by/3.0/legalcode and updated by licensee January 1, 2014.

Includes content of Regione Sardegna, licensed under http://www.dati.gov.it/iodl/2.0/ and updated by licensee May 1, 2014

Latvia EuroGeographics.

Lithuania EuroGeographics.

Moldova EuroGeographics.

Norway Copyright 2000; Norwegian Mapping Authority Includes data under the Norwegian licence for Open Government data (NLOD), available at http://data.norge.no/nlod/en/1.0 .

Contains information copyrighted by Kartverket, made available in accordance with http://creativecommons.org/ licenses/by/3.0/no/ .

Poland EuroGeographics.

Portugal Source: IgeoE Portugal.

Slovenia EuroGeographics.

Spain Informacin geogrfica propiedad del CNIG.

Contains data that is made available by the Generalitat de Catalunya Government in accordance with the terms available at http:// www.gencat.cat/web/eng/avis_legal.htm . Retrieved by HERE 05/2013.

Contains content of Centro Municipal de Informatica Malaga, licensed in accordance with http://creativecommons.org/ licenses/by /3.0/legalcode .

Contains content of Administracin General de la Comunidad Autnoma de Euskadi, licensed in accordance with http:// creativecommons.org/licenses/by/3.0/ legalcode .

Sweden Based upon electronic data National Land Survey Sweden.

Contains public data, licensed under Go Open v1.0, available at http:// data.goteborg.se/goopen .

Switzerland Topografische Grundlage: Bundesamt fr Landestopographie.

Ukraine EuroGeographics.

04 Map and system information

04

45

United Kingdom Contains public sector information licensed under the Open Government License v.1.0 (see the license http:// www.nationalarchives.gov.uk/doc/open- government-licence/).

Adapted from data from the Office for National Statistics licensed under the Open Government Licence v.1.0.

Related information Navigation - map and system information

(p. 37)

Sensus Navigation (p. 6)

05 Alphabetical Index

05

46

A

arrival time................................................. 28

C

Character wheel......................................... 11

Compass................................................... 26

Copyright................................................... 43

D

Delete itinerary........................................... 20

Destination................................................. 15

F

Fault tracing sensus navigation................................. 41

G

Guiding options......................................... 28

I

Itinerary...................................................... 20

K

Keyboard................................................... 11

M

Map areas.................................................. 37

map data.................................................... 37

Map options............................................... 26

Menus menu overview, navigation................... 38 Scroll menu............................................. 9

P

POI specify destination................................ 15 symbols................................................ 19

Points of interest, see also POI................. 19

R

Resume guidance...................................... 20

Route......................................................... 21 alternative routes and route overview.. 21

S

Safety camera............................................ 28

Scale change.................................................. 33

Speed camera........................................... 28

Start guidance........................................... 20

Stop guidance........................................... 20

T

Traffic information...................................... 33

Transport of car......................................... 41

travel time.................................................. 28

U

Update of maps......................................... 37

USB connection........................................... 6

05 Alphabetical Index

05

47

V

Voice control.............................................. 12

Voice guidance..............................

Manualsnet FAQs

If you want to find out how the V40 Volvo works, you can view and download the Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Volvo V40 as well as other Volvo manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Volvo V40. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Volvo V40 Cross Country Sensus Navigation 2016 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.