Vivotek AM-21N Bracket Quick Installation Guide PDF

1 of 2
1 of 2

Summary of Content for Vivotek AM-21N Bracket Quick Installation Guide PDF

Revison History: Rev. 1.0: Initial release

VIVOTEK Mounting Accessories

AM-21N Tilt Bracket

Installation Guide

Mounting Dimensions

InstallationII

Compatible VIVOTEK CamerasI

Compatible cameras/brackets MS9390-HV

Remove the plastic plug on the conduit hole. A 3/4" conduit is required for routing the cables with waterproof connection.

There are 3 mount types:

Install the cable gland and pass cables through it. The conduit is user-supplied.

A

Accessory Ordering part no.: 100228700G

M4 X 25

unit: mm

Package Contents

Install the dome cover to the camera.

5.5 ~ 6.4mm

Attach the waterproof cable gland to the retention clips at the back of the camera. Connect a grounding wire to the ground screw of the camera.

Install the waterproof components of the cable gland to your Ethernet cable following the QIG of your camera. The cable gland will be placed within the protection of the tilt bracket.

If using the side hole, seal the center hole.

OR

3/4

6.5mm

Attach the included alignment sticker to a preferred position. Drill holes on the wall and install the tilt bracket. If the space behind the wall allows, you may also pass cables through the wall.

A

C

B

A. Wall mount,

B. Pole mount via AM-312, Corner mount via AM-412

C. to electrical junction box.

A-1

A-2 A-3

x4 Torque: 6.50.5kgf-cm

Remove the top cover from your camera.

Attach the tether wire to the back of the camera. A-4 A-5

A-6

1.5m

Stainless SS M3*5

Green/Yellow 20AWG

A-7

x4

Torque: 6.50.5kgf-cm

Install the camera to the tilt bracket by fastening 4 T10 screws.

T10

A-8

1

2

3

46

5

8

7

10 LAN/PoE100~240V

AC

ON

OFF

9

GE LAN GE LAN

802.3at

Open a live view console and adjust the shooting direction. Refer to the camera's QIG for more information.

Install the cable conduit before wall-mounting. The conduit can be installed from the side or through the center hole.

Remove the top cover from the camera. B B-1

x4 Torque: 6.50.5kgf-cm

Install the tilt bracket to AM-312 using the included M4 screws, washers and hex nuts. Pass the conduit through the center hole of the AM-312.

B-2

AM-312

M4X15 B holes

B-3

Installation Torque: 35 lb-in(40kg-cm)

1. Pass the stainless steel straps through the bracket and around the pole.

2. Tighten the straps using a pincer plier and a flat blade screwdriver.

The tilt bracket supports the installation to the following electrical boxes: 1. Cantex 3/4" type FSE 2 Gang, Outdoor/Indoor electrical box. 2. Generic 3/4" conduit box enclosure, 3/5 holes. 3. Single rectangular handy box.

Manualsnet FAQs

If you want to find out how the AM-21N Vivotek works, you can view and download the Vivotek AM-21N Bracket Quick Installation Guide on the Manualsnet website.

Yes, we have the Quick Installation Guide for Vivotek AM-21N as well as other Vivotek manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Installation Guide should include all the details that are needed to use a Vivotek AM-21N. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Vivotek AM-21N Bracket Quick Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Vivotek AM-21N Bracket Quick Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Vivotek AM-21N Bracket Quick Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Vivotek AM-21N Bracket Quick Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Vivotek AM-21N Bracket Quick Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.