Vivotek AM-522 Adapter Installation Guide PDF

1 of 16
1 of 16

Summary of Content for Vivotek AM-522 Adapter Installation Guide PDF

IP Survei l lance

Installation Guide

VIVOTEK Fixed Dome & PTZ Series Mounting Cap

Using AM-520 and AM-522 mounting cap and compatible accessories

Rev. 1.0

2

n 180

42 .7

6

n 37 M6 SOCKET SET SCREWS

3/4" NPT

AM-520 Mounting Cap Mechanical Drawings

Revision History: * Rev. 1.0: Initial Release

3

E ng

lis h

Compatible VIVOTEK CamerasI

Fixed Dome series FD8361 / FD8361L / FD8362 /FD8362E / FD8363 / FD8335H/ FD8372 / FD8162 / FD8135H / FD8163 / FD8131V / FD8133V/ FD8134V / FE8172V / FE8171V / MD7530 / MD7560 / MD8562 / FD8164 / FD8137H / FD8131 / FD8133 / FD8134 / FE8172 / F8173 / FD8164V / FD8137HV

You may also refer to VIVOTEK's website for the list of supported models. Support for other models can be available through time.

60,3

R0,5

R0 ,5

173

21

15

43,6

40

8

1-1/2" PS11

3/4" NPT

1-1/2" PS11XL17mm

3/4" NPT

AM-522 Mounting Adapter Mechanical Drawings

4

InstallationII

Above are the locations of different groups of mounting holes for matching different cameras: Hole Type

Applicable Cameras Screw No. of screws

Screw pack

A FD8361 / FD8361L / FD8362 /FD8362E / FD8363 / FD8335H/ FD8372

M5X10 round head 4 A

B FD8162 / FD8135H / FD8163 M4X12 round head 3 B

C FD8131V / FD8133V/ FD8134V M3X6 round head 3 C/E/F/K

D FE8172V / FE8171V M3X8 binding head 3 D

E MD7530 / MD7560 / MD8562 M3X6 round head 3 C/E/F/K

F FD8164 / FD8137H M3X6 round head 3 C/E/F/K

H FD8131 / FD8133 / FD8134 M3X6 round head 2 H

I FE8172 / FE8173 M3X8 binding head

4 I

K FD8164V / FD8137HV M3X6 round head

3 C/E/F/K

Mounting Hole Definitions

5

E ng

lis h

Refer to the table below for the description of the included screws: Screw Description No. of

screws Material char.

M5X10 (A) 4

M4X12 (B) 3

M3X6 (C/E/F/K) 3

M3X8 (D) 3

M3X6 (H) 2

M3X8 (I) 4

NOTE:

1. AM-522 is necessary when installing the AM-520 mounting cap to VIVOTEK's standard mounting options such as AM-212 (wall mount bracket) and AM-221 (gooseneck).

2. Route cables before you secure the accessories to a wall. 3. For details on the cable connections with each camera, please refer to their Quick

Installation Guide.

For cabling and configuration details with each network camera, please refer to their documentation.

6

Configuration - Pendant Pipe

3/4pendent pipe

AM-520

AM-522 adapter

AM-118 pendant head

3/4 female adapter

Configuration - Wall Mount

AM-520

AM-522 adapter

AM-212 Wall-mount bracket

Note: The 3/4" female adapter is separately purchased.

7

E ng

lis h

Configuration - Gooseneck

AM-520

AM-522 adapter

AM-221 gooseneck

NOTE:

When installing the mounting cap, take note that the orientation of the mounting cap can affect the camera's shooting direction. You may need to remove the mounting cap, rotate, and re-install it for the best orientation. Use the hex wrench to tighten its retention hex socket screw when done.

8

H holes

M3X6 Screws

RJ-45 coupler

Refer to the matching table on page 4 for the mounting hole information for your camera. Installing Camera to Mounting Cap

1. You should route cables through other accessories before you install cameras to the mounting cap.

2. Route power lines and other cables through the mounting cap. 3. Orient and install the camera to the mounting cap. 4. Connect cables to the camera. 5. Install the mounting cap to other accessories, e.g., wall-mount bracket. 6. Proceed with initial setup such as enabling network access, focus tuning, or zooming.

When done, secure the outer dome cover.

FD8134

Some installation samples are shown below:

9

E ng

lis h

Note that for cameras that come with cable glands, e.g., FD8134 and FD8134V, it can be tricky passing them through a 3/4" pendant pipe.

1

2 From local network

1. You can pass the cable gland and other wires into or through the pendant pipe, while leaving the RJ-45 connector behind.

2. Route another Ethernet cable from the local network through the other end of the pendant pipe.

3. You can then install the pendant pipe.

10

RJ-45 coupler

You can then connect the RJ-45 from the camera with that from the local network using an RJ-45 coupler. When done, press the coupler and the cables into the recess of the bracket.

Align and install the camera to the bracket.

11

E ng

lis h

M3X6 Screws

C holes

FD8134V

M4X12 Screws

B holes

FD8135H

12

A HOLES

FD8362E

13

E ng

lis h

MD8562

E holes

M3X6 Screws

Press and route cables through here

14

D holes

M3X8 Screws

For details routing and preparing for waterproof cabling, please refer to the camera's Quick Installation Guide.

FE8172V

F holes

FD8164 / FD8137H

15

E ng

lis h

FD8361 & FD8361L

<

Manualsnet FAQs

If you want to find out how the AM-522 Vivotek works, you can view and download the Vivotek AM-522 Adapter Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Vivotek AM-522 as well as other Vivotek manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Vivotek AM-522. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Vivotek AM-522 Adapter Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Vivotek AM-522 Adapter Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Vivotek AM-522 Adapter Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Vivotek AM-522 Adapter Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Vivotek AM-522 Adapter Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.