Viking P30CRTSS Trim Installation Guide PDF

1 of 8
1 of 8

Summary of Content for Viking P30CRTSS Trim Installation Guide PDF

Installation Guide

Countertop Side Trim

Countertop Rear Trim

2

Installation (Side Trim)

1. Remove the outside grates and grate supports next to the counter.

2. Locate and remove the screws holding the grate support side trim in place. Keep the screws for reuse.

3. Lift the grate support side trim out. It will not be reinstalled.

4. Locate and remove the screws holding the heat shield in place. Keep the screws for reuse.

5. Lift the heat shield out and set aside for reuse.

6. Place the countertop side trim into place. Align with the countertop and the landing ledge. Replace and secure with the original screws.

7. Replace the heat shield and align the slotted screw holes with the screw holes in the side trim. Replace and secure with the original screws.

8. This countertop side trim was designed to accommodate most installations. If the trim needs to be shorter, cut at the rear to t.

For Models: R24CSTSS - 24 D. VGIC Open Burner Ranges

CAUTION The heat shield must be replaced only if it is part of the original product.

Grate support side trim (standard with product)

Heat shield (not on all products)

Countertop side trim (optional accessory)

Heat shield (not on all products)

3

Installation (Side Trim)

Place the countertop side trim template against the side of the range or rangetop. The ange of the template should be wrapped around the back of the unit. The top of the template should be even with the top edge of the outer trim. Mark the holes and remove template. Using a 9/64 drill bit, drill the three designated holes into the side of the range or rangetop. Place the countertop side trim into place and secure with the provided screws.

For Models: P24CSTSS - 24 D. 5 Series VGCC/VGSC/VDSC/VESC/VISC Ranges and VGRT Rangetops 24 D. RDSCG/RDSCD/RDSCE D3 Ranges

RD24CSTSS - 24 D. 3 Series RVGR/RVDR/RVER Ranges

4

For Models:

P30CRTSS - 5 Series 30 W. VGCC, VGSC, VDSC, VESC, VISC Ranges and 5 Series 30 W. VGRT Rangetops 3 Series 30 W. RVGR, RVDR, RVER Ranges P36CRTSS - 5 Series 36 W. VGCC, VGSC, VDSC Ranges and 5 Series 36 W. VGRT and VERT Rangetops P48CRTSS - 5 Series 48 W. VGCC, VGSC, VDSC Ranges and 5 Series 48 W. VGRT Rangetops P60CRTSS - 5 Series 60 W. VGCC and VDSC Ranges and 5 Series 60 W. VGRT Rangetops

Countertop Rear Trim

Installation (Rear Trim)

5

Countertop rear trim and countertop side trim installed

Installation (Rear Trim)

6

7

Viking Range, LLC 111 Front Street

Greenwood, Mississippi MS 38930 (662) 455-1200

For more product informations, visit our website at www.vikingrange.com in

Manualsnet FAQs

If you want to find out how the P30CRTSS Viking works, you can view and download the Viking P30CRTSS Trim Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Viking P30CRTSS as well as other Viking manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Viking P30CRTSS. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Viking P30CRTSS Trim Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Viking P30CRTSS Trim Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Viking P30CRTSS Trim Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Viking P30CRTSS Trim Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Viking P30CRTSS Trim Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.